The JL10 Series are TUV approved and UL recognized, one-touch locking, circular, waterproof connectors for industrial machinery, satisfying European safety standards.The adopted one-touch lock mechanism has a superior mating and unmatingoperability and the product contributes to mating function ease.The JL10 receptacle offers a hybrid one-touch lock and threaded dual function mating. The connector offers mating compatibility with conventional MIL standard MS connectors and with our screw mating plugs (JL04V, N/MS, JA).On top of the existing solder termination, a crimp termination option has been added to the 18-10 and 22-22 pin arrangement receptacles.
JL10
JL10
Receptacle Plug
JL04VN/MS-A/BJA*A*J1
Screw mating
One-touch mating
One-touch mating area
Screw mating area
Applications
Industrial machineries, servo motors, robots, semiconductor-fabrication equipment, communication devices, measuring devices, broadcasting equipment and more.
Adopts a one-touch bayonet lock style mating allows secure mating even in narrow operating spaces or areas with poor visibility. Superior connector operability improves mating and unmating function (reduced screw-down fastening, and eliminating torque control).
JL10 Receptacle is an one-touch / screw mating hybrid type.One-touch mating: When mated with JL10 plugScrew mating: MIL-standard MS connector and our standard N/MS-A/B Series, JL04V Series, JA*A Series using J1 type plug.
Receptacle’s cable connection is available as soldering connection (for all receptacle) and crimp connection (for pin arrangements, 18-10 and 22-22)
With guide mark (color: white) on JL10 Series receptacle and plug, mating assurance can be confirmed by sight.
Low-profile compact design, and direction of the cable leader of angled type can be set in arbitrary 8 orientation in 45 degrees increments.
Same cable clamp as used for JL04V.UL recognized and TÜV approved product.IP67 waterproof and dustproof
For the receptacles there are individually waterproof (-2E) and waterproof as a mated pair (-2A).
Superior environmental performance against vibration and oil.
Note 1) Please contact us or conduit manufacturer when for the use of a conduit.Note 2) Please refer to individual catalogs for consideration of JL04V Series, N/MS-A/B Series, and J1 type JA*A Series.Note 3) Becomes non-waterproof when assembled with N/MS-A/B type plug.
Connector type コネクタタイプ None: without solder-cup on earth contact2: Panel mount type receptacle 保護回路端子の結線部無し2: パネルマウント型レセプタクル B: with solder-cup on earth contact
保護回路端子の結線部有りE: Water-proof(unmate) 単体防水構造 Insert rotation positionA: Water-proof(mated) インサート回転角度記号 嵌合時防水構造 None: Normal position
W: W positionShell size X: X positionシェルサイズ Y: Y position
Z: Z positionInsert arrangementインサート配列 E: With protective earth terminal
保護回路接続有りContact type ｺﾝﾀｸﾄﾀｲﾌﾟ None: Without protective earth terminalP: Pin (Soldering) ピン(はんだﾀｲﾌﾟ) 無印: 保護回路接続無しS: Socket (Soldering) ソケット(はんだﾀｲﾌﾟ)PC: Pin(Crimp) ﾋﾟﾝ(圧着ﾀｲﾌﾟ)
22 P* E * *JL10 2 E 22 -
≪RECEPTACLE レセプタクル≫
- -Series Single block
シリーズ 単体EB: With End-bell
Connector type コネクタタイプ 標準エンドベル付6: Straight plug ストレートプラグ EB1: With End-bell with8: Angle plug アングルプラグ enlarged cable entry
ケーブルエントリー径A: Water-proof in mated part 拡大型エンドベル付
A: 嵌合時嵌合部防水構造Insert rotation position
Shell size インサート回転角度記号シェルサイズ None: Normal position
W: W positionInsert arrangement X: X positionインサート配列 Y: Y position
Z: Z positionContact type ｺﾝﾀｸﾄﾀｲﾌﾟP: Pin (Soldering) ピン(はんだﾀｲﾌﾟ) E: With protective earth terminalS: Socket (Soldering) ソケット(はんだﾀｲﾌﾟ) 保護回路接続有り
None: Without protective earth terminal無印: 保護回路接続無し
JL10 6 A 22 - 22 S E * *None:
≪PLUG プラグ≫
*Please contact JAE for products requiring non-standard insert position.
*Please contact JAE for products requiring non-standard insert position.
Accessory: Gasket (Sold separately)There is a gasket to prevent water immersion from the panel hole (main body) of the enclosure when receptacle is mounted to the panel (enclosure). The gaskets are the same as ones used for our JL04V Series.Note 1) Beside the use of a gasket, there is a need for countermeasure to prevent water immersion from the screw holes. Each user to prepare countermeasure.
* The specifications in this brochure are subject to change without notice. Please contact JAE for information.
Notice:
1. The values specified in this brochure are only for reference. The products and their specifications are subject to change without notice. Contact our sales staff for further information before considering or ordering any of our products. For purchase, a product specification must be agreed upon.
2. Users are requested to provide protection circuits and redundancy circuits to ensure safety of the equipment, and sufficiently review the suitability of JAE's products to the equipment.
3. The products presented in this brochure are designed for the uses recommended below.We strongly suggest you contact our sales staff when considering use of any of the products in any other way than the recommended applications or for a specific use that requires an extremely high reliability.
(1) Applications that require consultation:(i) Please contact us if you are considering use involving a quality assurance program that you specify or that is peculiar to the industry, such as: Automotive electrical components, train control, telecommunications devices (mainline), traffic light control, electric power, combustion control, fire prevention or security systems, disaster prevention equipment, etc. (ii) We may separately give you our support with a quality assurance program that you specify, when you think of a use such as : Aviation or space equipment, submarine repeaters, nuclear power control systems, medical equipment for life support, etc.
(2) Recommended applications include:Computers, office appliances, telecommunications devices (terminals, mobile units), measuring equipment, audiovisual equipment, home electric appliances, factory automation equipment, etc.
When using JL10 receptacle and JL04 plug mating and unmatingoperation will be the two steps as shown below.
