Date post: | 15-Apr-2017 |
Category: |
Documents |
Upload: | pieter-van-asten |
View: | 172 times |
Download: | 0 times |
Maintenance & Certification Compliance Monitoring
MCCM stands for:• Maintenance and Certification Compliance Monitoring.
MCCM identifies and reports the level of compliance, creates awareness and raises attention and therefore enables proper (non-) compliance management.
Main indicators are: equipment identification; the maintenance plan, execution, follow up & record keeping; equipment physical condition and the management of those.
Start with Tier 1 systems i.e. Well Control & High Pressure Mud system.
It is a program where the Drilling Contractor must demonstrate that equipment on the rigs is adequately certified and calibrated and in a known, non-degraded, condition assured in a sustainable way by an effective and defined process and system.
Maintenance & Certification Compliance Monitoring
What was supposed to be well maintained and not degraded, MCCM identifies:
Maintenance & Certification Compliance Monitoring
What was supposed to be well maintained and not degraded, MCCM identifies:
What was recorded in work order management,
Maintenance & Certification Compliance Monitoring
What was supposed to be well maintained and not degraded, MCCM identifies:
What actually was documented and kept on record as history. What was recorded in work order management,
Maintenance & Certification Compliance Monitoring
What was supposed to be well maintained and not degraded,
What actually was used…, but not properly maintained or managed.
MCCM identifies:
What actually was documented and kept on record as history. What was recorded in work order management,
Maintenance & Certification Compliance Monitoring
MCCM identifies:MCCM traffic light report used to express the level of compliance, based
on desk top data review