+ All Categories
Home > Documents > MCP-220-51201-0N installation guide

MCP-220-51201-0N installation guide

Date post: 30-Dec-2015
Category:
Upload: mufutau-reeves
View: 29 times
Download: 0 times
Share this document with a friend
Description:
MCP-220-51201-0N installation guide. Rech Weng. 1. 2. 5. 3. 6. 10. 7. 11. 4. 8. 9. 12. Mount left bracket. Mount the left bracket (2) with 2x M4 screws (11) on DVD. Mount right bracket. Mount the right bracket (1) with 2x M4 screws (11) on DVD. Mount backplane left side. - PowerPoint PPT Presentation
10
Supermicro © 2009 Confidential MCP-220-51201-0N installation guide Rech Weng
Transcript

Supermicro © 2009 Confidential

MCP-220-51201-0N installation guide

Rech Weng

Supermicro © 2009 Confidential

1

2

3

4

5

678

9

10

11

12

Supermicro © 2009 Confidential

Mount left bracket

Mount the left bracket (2) with 2x M4 screws (11) on DVD

Supermicro © 2009 Confidential

Mount right bracket

Mount the right bracket (1) with 2x M4 screws (11) on DVD

Supermicro © 2009 Confidential

Mount backplane left side

Insert spacer (5) into left hole of backplane (4) and then install the backplane on the back of DVD

Screw the left hole with M2 screw (9)

Supermicro © 2009 Confidential

Mount backplane right side

Screw the right hole with M3 screw (7)

Supermicro © 2009 Confidential

Install standoff (10) on the motherboard

Supermicro © 2009 Confidential

Place DVD on the MB and HDD

Screw the DVD assembly on the standoff with 6#32 screw (6)

Plug the DVD cable (3) on the backplane. Hook both front sides of DVD assembly on the front panel opening

Supermicro © 2009 Confidential

Mount with chassis wall

Screw the DVD assembly on the left side wall of chassis with flat head 6#32 screw (8)

Supermicro © 2009 Confidential

Dummy board (12)

When chassis has no MB inside or the MB is very small, standoff will need this dummy beneath to keep its height. 


Recommended