DECLARATIONS OF CONFORMITY, ET2243L/ET2244L PROPRIETARY INFORMATION DOC #: MD600011 Print Date: 4-Feb-13 REV: C Page 1 of 19 UNCONTROLLED COPY OF RELEASED DOCUMENT FROM DOCUMENTATION SERVICES MD600011 DECLARATIONS OF CONFORMITY, ET2243L/ET2244L REVISION HISTORY Rev Eng. Date Description A Angela Huang 4/11/2011 Initial release per ECO-11-009687 B Angela Huang 10/31/11 Pre ECO--11-022306 -Added model ET2244L. -Add KC and E-standby certificate -Add BSMI certificate C Angela Huang 01/03/2013 Revised per ECO-13-001996 1. AC600045 will obsolete and replacement by MD600011 Change to Elo logo 2. Update Declaration of Conformity 3. Update CB Certificate 4. Update CCC Certificate 5. Update KCC Certificate 6. Update E-standby Certificate
Transcript
DECLARATIONS OF CONFORMITY, ET2243L/ET2244L PROPRIETARY INFORMATION
DOC #: MD600011
Print Date: 4-Feb-13
REV: C
Page 1 of 19
UNCONTROLLED COPY OF RELEASED DOCUMENT FROM DOCUMENTATION
SERVICES
MD600011 DECLARATIONS OF CONFORMITY, ET2243L/ET2244L
REVISION HISTORY
Rev Eng. Date Description A Angela
Huang 4/11/2011 Initial release per ECO-11-009687
B Angela Huang
10/31/11 Pre ECO--11-022306 -Added model ET2244L. -Add KC and E-standby certificate -Add BSMI certificate
C Angela Huang
01/03/2013 Revised per ECO-13-001996 1. AC600045 will obsolete and replacement by MD600011
Change to Elo logo 2. Update Declaration of Conformity 3. Update CB Certificate 4. Update CCC Certificate 5. Update KCC Certificate 6. Update E-standby Certificate
DECLARATIONS OF CONFORMITY, ET2243L/ET2244L PROPRIETARY INFORMATION
DOC #: MD600011
Print Date: 4-Feb-13
REV: C
Page 2 of 19
UNCONTROLLED COPY OF RELEASED DOCUMENT FROM DOCUMENTATION
SERVICES
Table of Contents Elo Declaration of Conformity CB Certificate by UL UL Cover Sheet Mexico CoC VCCI Registration Certificate CCC certificate KCC Certificate E-standby BSMI Certificate
1/2
Ref. Certif. No.
DK-27876-M1-UL
IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME
SYSTEME CEI D'ACCEPTATION MUTUELLE DE CERTIFICATS D'ESSAIS DES EQUIPEMENTS ELECTRIQUES (IECEE) METHODE OC
CB TEST CERTIFICATE CERTIFICAT D'ESSAI OCProductProduit
LCD Touchscreen Monitor
Name and address of the applicantNom et adresse du demandeur
ELO TOUCH SOLUTIONS INC301 CONSTITUTION DRMENLO PARK, CA 94025 United States
Name and address of the manufacturerNom et adresse du fabricant
ELO TOUCH SOLUTIONS INC301 CONSTITUTION DRMENLO PARK, CA 94025 United States
Name and address of the factoryNom et adresse de l'usine
Note: When more than one factory, please report on page 2Note: Lorsque il y plus d'une usine, veuillez utiliser la 2ème page
ELO TOUCH SOLUTIONS INC301 CONSTITUTION DRMENLO PARK, CA 94025 United States
Additional Information on page 2Ratings and principal characteristicsValeurs nominales et caractéristiques principales
12 Vdc, 3 A (Optional)
Trademark (if any)Marque de fabrique (si elle existe)
Type of Manufacturer's Testing Laboratories usedType de programme du laboratoire d'essais constructeur
Model / Type Ref.Ref. De type
ET2243L, ET2244L
Additional information (if necessary may also be reported on page 2)Les informations complémentaires (si nécessaire,, peuvent être indiqués sur la 2ème page
Additionally evaluated to EN 60950-1: 2006 / A11: 2009 / A1 2010 / A12: 2011; National Differences specified in the CB Test Report.
Additional Information on page 2A sample of the product was tested and found to be in conformity withUn échantillon de ce produit a été essayé et a été considéré conforme à la
IEC 60950-1(ed.2), IEC 60950-1(ed.2);am1
As shown in the Test Report Ref. No. which forms part of this CertificateComme indiqué dans le Rapport d'essais numéro de référence qui constitue partie de ce Certificat
U1207188-368 issued on 2012-08-31
This CB Test Certificate is issued by the National Certification BodyCe Certificat d'essai OC est établi par l'Organisme National de Certification
UL (US), 333 Pfingsten Rd IL 60062, Northbrook, USA
UL (Demko), Borupvang 5A DK-2750 Ballerup, DENMARK
UL (JP), Marunouchi Trust Tower Main Building 6F, 1-8-3 Marunouchi, Chiyoda-ku, Tokyo 100-0005, JAPAN
UL (CA), 7 Underwriters Road, Toronto, M1R 3B4 Ontario, CANADA
For full legal entity names see www.ul.com/ncbnames
Date: 2012-09-04Original Issue Date: 2012-09-03
Signature:
Jan-Erik Storgaard
CERTIFICATE OF COMPLIANCE Mexico
Certificate Number CoC-Mex-00233-UL
Report Reference E162681-A36-UL
Issue Date 2012-08-08
Expiration This Certificate becomes null and void when the product described below no longer appears in the appropriate UL Directory or when the product no longer bears the appropriate UL Mark.
Certification System The UL Mark Program is most closely represented by the Type 3 product certification system as described in ISO/IEC Guide 67:2004.
Only those products bearing the UL Listing Mark for the US and Canada should be considered as beingcovered by UL's Listing and Follow-Up Service meeting the appropriate requirements for US and Canada.See the UL Online Certification Directory at www.ul.com for additional information.
The UL Listing Mark for the US and Canada generally includes: the UL in a circle symbol with "C" and "US" identifiers: theword "LISTED"; a control number (may be alphanumeric) assigned by UL; and the product category name (product identifier) asindicated in the appropriate UL Directory.
William R. Carney, Director, North American Certification ProgramsUL LLCAny information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL.For questions, please contact a local UL Customer Service Representative at http://www.ul.com/global/eng/pages/corporate/contactus
Issued to: ELO TOUCH SOLUTIONS INTERNATIONAL INC3RD FL 45 DONGSING RDTAIPEI, 110 TAIWAN
This is to certify that representative samples of
LCD Touch Monitor
Model (s): ET2243L, ET2244LTrademark (s): TE Connectivity or Elo Touch Solutions
Have been investigated by UL LLC in accordance with the Standard(s) indicated on this Certificate.
Standard(s) for Safety: UL 60950-1, 2nd Edition, 2007-03-27,CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03.
This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements.
