MD8480C - TestMart

MD8480CW-CDMA Signaling Tester

Protocol and Application Testing for W-CDMA/HSDPA andGSM/GPRS Chipset and Mobile Device Development

2

Single Unit Support for W-CDMA/HSDPA and GSM/GPRSChipset and Mobile Device Protocol and Application Testing

The MD8480C is a Base Station Simulator for testing 3.5G W-CDMA mobile phone stationswith High Speed Download Packet Access (HSDPA) functions. It has an air interface conforming to 3GPP specifications, and permits a full range of application tests. Capabilitiesinclude testing chipset and mobile station coding/decoding processing, voice and packet communications, and MS-to-MS testing (requires two MD8480C units). MD8480C protocol sequence tests include position registration, origination/termination, handover (option),and disconnection from a mobile station/network.Moreover, by adding optional functions for GSM/GPRS, handover tests between W-CDMA andGSM/GPRS can be performed. The MD8480C is ideal for developing UMTS mobile UE supporting global services, as well as for evaluating high-function application software formobile stations that support HSDPA.

ISDN

64 kbps

MD8480C

DL: 14.4 MbpsUL: 384 kbps

Mobile phone

Packet Voice

Ethernet

Control PC

GSM AMR

: Features Supports 3GPP Release 5 (HSDPA) Supports all UE categories for HSDPA Provides 14.4 Mbps*1 data throughput Expanded functions for up to four base stations in single unit Flexible definition of parameters and sequences for protocol sequence testing Upgradeability from MD8480A/B for maximized scenario investment efficiency

∗ 1 theoretical figure

: Main Performance and Applications W-CDMA/HSDPA • GSM/GPRS mobile terminal protocol sequence tests Voice, Packet, MS-to-MS, and other application tests W-CDMA/HSDPA/GSM/GPRS mobile station coding/decoding function tests

3

: High-speed data transfer up to 14.4 Mbps∗ 1

The MD8480C incorporates the latest hardware and signal-processing technologies to achieve data transfer speeds up to 30 timesthat of earlier equipment. It supports all 12 HSDPA categories specified by the 3GPP (Release 5) specifications.It is ideal for developing high-functionality chipsets and mobile stations supporting HSDPA high-speed data communications.

Category Codes Inter-TTI TB-size Total # of soft Bits Modulation Data Rate∗ 1

1 5 3 7300 19200 QPSK/16QAM 1.2 Mbps

2 5 3 7300 28800 QPSK/16QAM 1.2 Mbps

3 5 2 7300 28800 QPSK/16QAM 1.8 Mbps

4 5 2 7300 38400 QPSK/16QAM 1.8 Mbps

5 5 1 7300 57600 QPSK/16QAM 3.6 Mbps

6 5 1 7300 67200 QPSK/16QAM 3.6 Mbps

7 10 1 14600 115200 QPSK/16QAM 7.2 Mbps

8 10 1 14600 134400 QPSK/16QAM 7.2 Mbps

9 15 1 20432 172800 QPSK/16QAM 10.2 Mbps

10 15 1 28776 172800 QPSK/16QAM 14.4 Mbps

11 10 2 3650 14400 QPSK 0.9 Mbps

12 10 1 3650 28800 QPSK 1.8 Mbps

Development of HSPDA Chipsets and Mobile Stations

HSDPA Category List (3GPP TS25.306)

384 kbps Max.

14.4 Mbps Max.∗ 1

: Single Unit Support for Development of3G/3.5G Mobile Stations

With its MU848060B TDMA option, the MD8480C supports W-CDMA and GSM/GPRS services as well as HSDPA in asingle unit. This support for handover tests within and betweensystems permits efficient development of UMTS mobile UE byeliminating the need for a BTS simulator in each system.As a result, low-cost space-saving test environments can beconfigured.

: Cuts New Project Development RisksBy supporting test development using the C language, theMD8480C enables creation of test scenarios that supportexpanded services. It also allows backward compatibility withscenarios created for the earlier MD8480A/B, and helpsdecrease risks from the changed development environment.The MD8480C's fast development environment also helps minimize project development risks, and upgrading fromMD8480A/B to MD8480C is possible.

HSDPA

GSM/GPRS W-CDMA

∗ 1 theoretical figure

4

Valuable Analysis Functions and Excellent Operability

: Trace ScreenThe test results for the sequence described by the test sce-nario are displayed on the trace screen shown at the rightusing the accessory MD8480C control software.Message capture — including the base station number, primitive details, and Layer-3 message data — between thesimulator and mobile station can be confirmed. If the actualresults are saved to a log file, post-testing failure analysis canbe performed by displaying the traces associated with thesaved logs.

: Measure ScreenThe MD8480C control software (a standard accessory) has abuilt-in Measure screen as shown on the right.It provides counter functions including send data throughputfrom the simulator side, ACK/NACK returned from the mobilestations, and CQI (Channel Quality Indicator).Simulator and mobile station operation can be confirmed quicklyand fault analysis can be performed simply using the data com-munications test.

5

Protocol Sequence Tests

MD8480C

Monitoring data transmissionand reception to/from mobile station.

Troubleshooting usingtrace screen

PC (UE control)

Control PC

W-CDMA mobile terminal protocol sequence tests can be performed by setting up the equipment as shown in the diagram below to run tests includ-ing broadcast transmission, location, registration, mobile station origination / network, dis-connection from the mobile station/ network , and handover (option).Furthermore, any parameters and sequences used by the protocol sequence tests canbe defined, permitting variations such as quasi-normal test and SMS test. In addition,data transfer between the mobile station and MD8480C can be monitored simultaneously.Using these advanced functions makes troubleshooting more effective and mobile stationprotocol sequence testing more efficient.

Protocol Sequence Test

Monitoring example: data communication between mobile station and MD8480C (protocal sequence test)

6

Application Tests

: Voice and Data communication TestsThe MD8480C can perform a variety of application tests.

AMR Voice TestWhen a handset (standard accessory) is connected to the MD8480C, voice calls with the mobile station can be tested.

IP Packet TestWhen a PC is connected (10/100BASE-T) to the MD8480C, IP protocol data communication testing can be performed.

PPP Packet Test (Option)When a PC is connected (RS-232C) to the MD8480C, PPP protocol data communication testing can be performed.PPP is the protocol used when connecting via dial-up.

PPP (built-in server) TestFor additional PPP testing, the PPP protocol stack is built into the MD8480C so the PPP protocol can be terminated in theMD8480C.High-speed communications between the PC and MD8480C is possible using Ethernet (14 Mbps downlink and 384 kbps uplink).

MD8480C

PC (UE control)

Control PC

IP packet server

IP Packet Test

MD8480C MD8480C

PC (UE control) PC (UE control)

MS-to-MS Test

: MS-to-MS and Other Tests User Data Test

Any data can be inserted to the send DTCH and demodulated DTCH data can be captured externally.This permits tests such as error rate measurement.

Video Call Test (Option)When a video call using the ISDN interface is connected to the MD8480C, audio and video communications tests can be performed between the mobile station and an external video terminal.

MS-to-MS TestWhen two MD8480C units are connected by 10BASE-T/100BASE-TX, end-to-end UE testing between two mobile stations is supported.

7

Coding and Decoding Function Tests

W-CDMA mobile station coding and decoding functions can betested using the setup shown in the diagram below.In the coding test, fixed and variable data (such as PN9) outputfrom the W-CDMA mobile station coding unit is compared withthe decoding results shown on the Trace screen.In addition, simultaneous BLER and BER measurements aresupported (BER tests require an external BER counter) andreceived signal timing errors can be displayed.In the decoding test, MD8480C fixed and variable W-CDMAdata (such as PN9) is output for comparison with the mobilestation decoding results.

: Coding/Decoding Setup (2)The setup shown on the right can monitor the MD8480C downlink output constellation (QPSK/16QAM) and power control condition,using the MS8609A Digital Mobile Radio Transmitter Tester to configure a fading simulator. This also enables visually checking variousmobile station operations in a dynamic environment, such as CQI notification to base station.

: Coding/Decoding Setup (1)

MD8480C

Output data (coding test)

Decoding result (decoding test)

Sync signal (if necessary)

Comparison Decoding result (coding test)

Output data (decoding test)

MD8480C

Downlink

Sync signal (if necessary)

Uplink

MS8609A+MX860950A (HSDPA measurement software)

Fading Simulator

Divider

constellation monitor

8

MU848072C BTS Unit MU848055A ISDN

MU848060B TDMA

MU848072C-01 HSDPA (Option)

Additional Units and Options

W-CDMA Base Station (MU848072C BTS Unit)The standard MD8480C configuration is a single base station with send and receive functions. However, addingthis unit enables a single MD8480C to perform W-CDMAsend and receive functions equivalent to up to four base stations.HSDPA Base Station (MU848072C-01 HSDPA)This option builds the HSDPA function into the W-CDMAbase station. It can be installed in a single standard W-CDMA base station and provides HSDPA transmissionand reception functions equivalent to up to four base stations.GSM/GPRS Base Station (MU848060B TDMA)This unit builds the GSM/GPRS function into the MD8480Cto offer location registration, origination/ termination, disconnection from mobile station/network and handover

(intra-system). It also supports various applications such asvoice and data communications. When used in combinationwith the MD8480B-02 RF Interface and MX848001A-02Compressed Mode Function described below, handovertests can be performed between W-CDMA (HSDPA) andGSM/GPRS.ISDN Interface (MU848055A ISDN)This option adds an ISDN interface supporting data rates upto 6B (384 kbps). In addition, PPP packet tests can be runusing the RS-232C interface provided by this option.2nd RF Interface (MD8480B-02 Additional RF Unit)This option adds support for two different transmission/reception frequencies. When used with any of the BaseStation options described above, hard handover tests (HHO)between base stations with different frequencies can be performed.

9

GSM CSD Function (MX848001A-04 GSM CSD)

This option supports the GSM Circuit Switched Data (CSD)

function. PPP packets at data rates of 9.6 and 14.4 kbps

are supported. Asynchronous mode data transmission in

non-transparent mode is also supported.

GSM Frequency Hopping Function

(MX848001A-05 GSM Frequency Hopping)

This option supports the GSM frequency hopping function

in the GSM channel at a frame sync of 4.62 ms.

W-CDMA Ciphering (MX848041C Ciphering)

This option adds the W-CDMA KASUMI ciphering function

(standard authentication algorithm for 3GPP) to

the authentication (Integrity) function that is supported as a

standard configuration.

HSDPA Ciphering (MX848041C-10 HSDPA Ciphering)

This option adds the HSDPA KASUMI ciphering function

(standard authentication algorithm for 3GPP) to

the authentication (Integrity) function that is supported as a

standard configuration.

: Additional Options (Software)

Diversity Function (MX848001A-01 Tx Diversity)

This option supports the Tx diversity function for TSTD,

STTD, and Crossed-Loop Modes 1 and 2.

Use of this option requires more than one BTS unit

(MU848072C) as an additional base station option.

HSDPA Tx Diversity Function

(MX848001C-11 HSDPA Tx Diversity)

This option supports the HSDPA Tx diversity function.

Use of this option requires the W-CDMA Tx diversity

function (MX848001A-01).

Compressed Mode Function

(MX848001A-02 Compressed Mode)

This option supports the compressed mode function. This

function is used primarily for hard handover (HHO) testing.

This option supports SF/2, Puncturing, and Higher Layer

Scheduling.

Router Connection Function

(MX848001A-03 Router Connection)

Use of this option enables data communication with a PC

on a different IP subnet (different IP subnet mask).

Both W-CDMA and GPRS data communications are

supported. In addition, this function also permits both IP

and PPP packet testing.

10

Options

: Software Maintenance Contract

W-CDMA/GSM Support Service

(MD8480C-20, MD8480C-21)

This contract option offers the following services related to

the W-CDMA/GSM function for a 1-year period.

• 3GPP-related software function revisions and

troubleshooting

• User-side troubleshooting support

The MD8480C-20 software maintenance contract is for the

MD8480C W-CDMA/GSM function; the MD8480C-21

software maintenance contract is for the MD8480C ciphering

functions (MX848041C/MX848045B). Refer to the separate

reference materials for the contract details.

HSDPA Support Service (MD8480C-22, MD8480C-23)

This contract option offers the following services related to

the HSDPA function for a 1-year period.

• 3GPP-related software function revisions and trou-

bleshooting

• User-side troubleshooting support

The MD8480C-22 software maintenance contract is for the

MD8480C HSPDA function; the MD8480C-23 software

maintenance contract is for the MD8480C ciphering function

(MX848041C-10).

This contract also requires a contract for the MD8480C-

20/21 option; see the separate reference

materials for the contract details.

: Extended Warranty Service

Consumables are not included in these warranty extensions.

2-Year Warranty Extension Service (MD8480C-ES210)

When purchased with new equipment, this extends the

standard 1-year hardware warranty period to 2

years.




years.




years.

11

Functions

Decoding test channels

Channel Logical Transport Physical Symbol rate

BCCH BCH P_CCPCH 15 ksps

P-SCH

S-SCH

P-CPICH 15 ksps

CommonS-CPICH 15 ksps

PICH 15 ksps

AICH 15 ksps

PCCH PCHS-CCPCH 15 ksps to 240 ksps

CCCH/DCCH/DTCH FACH

HS-SCCH∗ 1 HS-DSCH∗ 1 HS-PDSCH∗ 1 480 kbps to 14.4 Mbps

DPCCH 7.5 ksps to 960 ksps

DedicatedDCCH+DTCH DCH DPDCH

DCCH+DTCH DPDCH

DCCH+DTCH DPDCH

Coding test channels

Channel Logical Transport Physical Symbol rate

PRACH(preamble)

Common PRACH(control)

CCCH/DCCH/DTCH RACH PRACH(message) 15 ksps to 120 ksps

DPCCH 15 ksps

Dedicated HS-DPCCH∗ 1

DCCH/DTCH DCH DPDCH 15 ksps to 960 ksps

∗ 1: MU848072C-01 HSDPA is necessary

∗ 1: MU848072C-01 HSDPA is necessary

Supported Services

Service Data ratePhysical channel downlink Physical channel uplink

(1 symbol =2 bits) (1 symbol = 1 bit)

(Protocol) (Standalone DCCH) 1xDPCH (15 ksps) 1xDPDCH (15 ksps)

Voic (GSM-AMR) 12.2 kbps (VAD Opt. 01) 1xDPCH (30 ksps) 1xDPDCH (60 ksps)

ISDN 1B 64 kbps 1xDPCH (120 ksps) 1xDPDCH (240 ksps)

32 kbps 1xDPCH (60 ksps) 1xDPDCH (120 ksps)

Packet64 kbps 1xDPCH (120 ksps) 1xDPDCH (240 ksps)

128 kbps 1xDPCH (240 ksps) Not supported


Audio and Visual32 kbps 1xDPCH (60 ksps) 1xDPDCH (120 ksps)


DCCH 1xDPCH (15 ksps) 1xDPDCH (15 ksps)

12.2 kbps 1xDPCH (30 ksps) 1xDPDCH (60 ksps)

64 kbps 1xDPCH (120 ksps) 1xDPDCH (240 ksps)Reference measurement channel



BTFD 1xDPCH (30 ksps) 1xDPDCH (60 ksps)

12.2 kbps + 32 kbps 1xDPCH (15 ksps) 1xDPDCH (240 ksps)

Multi callVoice + Packet 12.2 kbps + 64 kbps 1xDPCH (15 ksps) Not supported

12.2 kbps + 384 kbps 1xDPCH (15 ksps) 1xDPDCH (960 ksps)

Voice + ISDN 1B 12.2 kbps + 64 kbps 1xDPCH (15 ksps) 1xDPDCH (240 ksps)

12

Frequency rangeTx: 300 to 3000 MHzRx: 350 to 550 MHz, 700 to 1100 MHz, 1400 to 2200 MHz

Maximum input level (total level)+40 dBm (Main connector), +20 dBm (Uplink connector)

Main: N type, Impedance: 50 Ω, VSWR: ≤1.3

RF Input/Output connectorDownlink 1: SMA type, Impedance: 50 Ω, VSWR: ≤2.0Downlink 2 (MD8480B-02 is necessary): SMA type, Impedance: 50 Ω, VSWR: ≤2.0Uplink: SMA type, Impedance:50 Ω, VSWR: ≤2.0

Frequency:10 MHzStartup characteristics: ≤±5 × 10–8 (10 minutes after power-on, reference to 24 hours after power-on)

Reference OscillatorAging rate: ≤±2 × 10–8/day, ≤±1 × 10–7/year (reference to 24 hours after power-onTemperature:≤±5 × 10–8 (0 to 40˚C, reference to 25˚C)External reference input: BNC type,10 MHz, 2 to 5Vp-pReference output: BNC connector, 10 MHz, TTL level

Frequency resolution 100 kHz

Maximum Tx channel 30 ch (Maximum 120 ch with option)

Main : –25 dBm/chMaximum Tx power Downlink 1: –10 dBm/ch

Downlink 2: –10 dBm/ch

Tx power setting rangeSetting range: 0 to –120dB from the Tx power (by ATT)Resolution: 0.1dB step

Level accuracy±1.5 dB≥–113 dBm (18 to 28˚C@calibrated CW)

Modulation QPSK, 16QAM (with MU848072C-01)

Chip rate 3.84 MHz

Modulation band limit Root Nyquist roll off (α=0.22)

EVM ≤7% rms (1 ch)


Receiver Input level rangeMain:–30 to +40 dBmUplink: –50 to +20 dBm

Modulation BPSK

Ambient temperature (operating) 0 to +40˚C

Ambient temperature (storage) –40 to +71˚C

Power AC100-120/200-240 V, 50-60 Hz, ≤650 VA

Dimensions and massDimensions:426 (W) × 310 (H) × 500 (D) mmMass: ≤35 kg

EN61326:1997/A2:2001 (Class A)EMC EN61000-3-2:2000 (Class A)

EN61326:1997/A2:2001(Annex A)

LVD EN61010-1:2001(Pollution Degree 2)

Electric chatacteristics

Transmitter

Others

Specifications

MD8480C: W-CDMA Signalling Tester

13


Maximum Tx RF channel 2 ch (CCH,TCH)

Main: –15 dBmMaximum output power Downlink 1: No output

Downlink 2: 0 dBm

Tx power setting rangeSetting range: 0 to –120dB from the average Tx power (by ATT)Resolution: 0.1dB step

≤1.5 dBLevel accuracy ≥–113 dBm

(18 to 28˚C @calibrated CW)

Modulation GMSK

Symbol rate 270.833 kHz

Phase error ≤5.0 deg. rms


Input level rangeMain: –30 to +35 dBmUplink: –50 to +15 dBm

Transmitter(GSM)

Receiver(GSM)

GSM Option: MU848060B TDMA

14

No. Additional function

12BTS handover (W-CDMA)



4 HSDPA 1 BTS

52BTS handover

(HSDPA)

63BTS handover

(HSDPA)

74BTS handover

(HSDPA)

8 ISDN

9Tx diversity

(1RF, W-CDMA)

10Tx diversity

(2RF, W-CDMA)

11Tx diversity

(1RF HSDPA)

12Tx diversity

(2RF HSDPA)

13Difference frequency

hard handover (2RF)

Inter system 14 (GSM/GPRS)

hard handover

15Ciphering

∗ 1 (W-CDMA)

16Ciphering

∗ 1 (HSDPA)

17Router connection

(W-CDMA)

18Router connection

(GPRS)

19GSM CSD

Circuit Switched Data

20GSM frequency

hopping

21Support service

(W-CDMA/GSM)

22Support service

(HSDPA)

MU

8480

72C

MU

8480

72C

MU

8480

72C

MU

8480

55A

MD

8480

B-0

2

MU

8480

60B

MU

8480

72C

-01

MU

8480

72C

-01

MU

8480

72C

-01

MU

8480

72C

-01

MX

8480

01A

-01

MX

8480

41A

-01

MX

8480

01C

-11

MX

8480

41C

-01

MX

8480

01A

-02

MX

8480

41A

-02

MX

8480

01A

-03

MX

8480

41A

-03

MX

8480

01A

-04

MX

8480

41A

-04

MX

8480

01A

-05

MX

8480

41A

-05

MX

8480

41C

MX

8480

41C

-10

MD

8480

C-2

0/21

MD

8480

C-2

2/23

: Additional Unit/Option Selection Guide The unit options marked in the table below are required for each of additional functions.

∗ 1: MX848041A-01,MX848041A-02,MX848041A-03,MD848041A-04,MX848041A-05 or MX848041C-11 must be ordered when the unit/option is used in combinationwith MX848001A-01,MX848001A-02,MX848001A-03,MX848001A-04,MX848001A-05 or MX848001C-11.

15

Model/Order No. Model Name Remarks

— Mainframe —MD8480C W-CDMA Signalling Tester

— Standard unit (incorporated in the main frame) —MU848051A CPUMU848056A Voice CodecMU848071C L2MU848072C BTS UnitMU848073C Timing Generator

— Standard accessories —MX848000C Control software 1 pc CD-ROM (Z0551C)MX848001C Firmware 1 pc CD-ROM (Z0551C)MX848002C FPGA data 1 pc CD-ROM (Z0551C)MX848003A W-CDMA Signalling Tester ISDN/PPP 1 pc CD-ROM (Z0551C)MX848005B GSM/GPRS 1 pc CD-ROM (Z0551C)J0491 Sheild power cord (13 A) 1 pcJ0892 Twist pair cable, 5 m (Cross) 1 pcJ0127A Coaxial cord, 1.0 m 1 pc BNC-P • ERG58A/U • BNC-PJ0576B Coaxial cord, 1.0 m 1 pc N-P • 5D-2W • N-PJ0654A Serial interface cable 1 pc IBM-PC/AT, J-310 (for remote control)J1006 Monitor cable 1 pc 20/50-pin 0.5 mF0111 Fuse, 15 A 1 pcT0001 Ferrite core 2 pcsT0002 Ferrite core 1 pcG0091 Monitor board 1 pcA0010 Blank board 10 pcs Quantity varies depending on the product configuration

— Option / Unit —MU848055A ISDN HardwareMU848060B TDMA HardwareMU848072C BTS unit HardwareMU848072C-01 HSDPA HardwareMD8480B-02 Additional RF unit HardwareMX848001A-01 W-CDMA Signalling Tester Tx diversity Software (license document)MX848001A-02 W-CDMA Signalling Tester Compressed mode Software (license document)MX848001A-03 W-CDMA Signalling Tester Router connection Software (license document)MX848001A-04 W-CDMA Signalling Tester GSM CSD Software (license document)MX848001A-05 W-CDMASignalling Tester GSM frequency hopping Software (license document)MX848001C-11 HSDPA Tx diversity Software (license document)MX848041C Ciphering Software (CD-ROM, license document)MX848041A-01 Tx diversity for ciphering Software (license document)MX848041A-02 Compressed mode for ciphering Software (license document)MX848041A-03 Router connection for ciphering Software (license document)MX848041A-04 GSM CSD for ciphering Software (license document)MX848041A-05 GSM frequency hopping for ciphering Software (license document)MX848041C-10 HSDPA ciphering Software (license document)MX848041C-11 HSDPA Tx diversity for ciphering Software (license document)MD8480C-20 Support service (W-CDMA/GSM) Software maintenance contract (CD-ROM, license document)MD8480C-21 Support service for ciphering (W-CDMA/GSM) Software maintenance contract (CD-ROM, license document)MD8480C-22 Support service (HSDPA) Software maintenance contract (CD-ROM, license document)MD8480C-23 Support service for ciphering (HSDPA) Software maintenance contract (CD-ROM, license document)MD8480C-ES210 Extended Warranty Service Extended two year hardware warrantyMD8480C-ES310 Extended Warranty Service Extended three year hardware warrantyMD8480C-ES510 Extended Warranty Service Extended five year hardware warrantyZ0745A MD8480C Upgrade Upgrade MD8480A/B to MD8480C (1RF)Z0745B MD8480C Upgrade Upgrade MD8480A/B to MD8480C (2RF)

Please specify model/order number, name and quantity when ordering.

Ordering Information

ANRITSU CORPORATION1800 Onna, Atsugi-shi, Kanagawa, 243-8555 JapanPhone: +81-46-223-1111Fax: +81-46-296-1264

• U.S.A.ANRITSU COMPANYTX OFFICE SALES AND SERVICE1155 East Collins Blvd., Richardson, TX 75081, U.S.A.Toll Free: 1-800-ANRITSU (267-4878)Phone: +1-972-644-1777Fax: +1-972-644-3416

• CanadaANRITSU ELECTRONICS LTD.700 Silver Seven Road, Suite 120, Kanata, ON K2V 1C3, CanadaPhone: +1-613-591-2003 Fax: +1-613-591-1006

• Brasil ANRITSU ELETRÔNICA LTDA.Praca Amadeu Amaral, 27 - 1 andar01327-010 - Paraiso, Sao Paulo, BrazilPhone: +55-11-3283-2511Fax: +55-11-3886940

• U.K.ANRITSU LTD.200 Capability Green, Luton, Bedfordshire LU1 3LU, U.K.Phone: +44-1582-433280 Fax: +44-1582-731303

• GermanyANRITSU GmbHGrafenberger Allee 54-56, 40237 Düsseldorf, Germany Phone: +49-211-96855-0 Fax: +49-211-96855-55

• FranceANRITSU S.A.9, Avenue du Québec Z.A. de Courtabœuf 91951 LesUlis Cedex, France Phone: +33-1-60-92-15-50Fax: +33-1-64-46-10-65

• ItalyANRITSU S.p.A.Via Elio Vittorini, 129, 00144 Roma EUR, ItalyPhone: +39-06-509-9711 Fax: +39-06-502-2425

• SwedenANRITSU ABBorgafjordsgatan 13 164 40 Kista, SwedenPhone: +46-853470700 Fax: +46-853470730

• DenmarkAnritsu AB DanmarkKorskildelund 6 DK - 2670 Greve, DenmarkPhone: +45-36915035Fax: +45-43909371

• SingaporeANRITSU PTE LTD.10, Hoe Chiang Road #07-01/02, Keppel Towers,Singapore 089315 Phone: +65-6282-2400 Fax: +65-6282-2533

• Hong Kong ANRITSU COMPANY LTD.Suite 923, 9/F., Chinachem Golden Plaza, 77 ModyRoad, Tsimshatsui East, Kowloon, Hong Kong, ChinaPhone: +852-2301-4980Fax: +852-2301-3545

• P. R. ChinaANRITSU COMPANY LTD.Beijing Representative OfficeRoom 1515, Beijing Fortune Building, No. 5 North Road,the East 3rd Ring Road, Chao-Yang DistrictBeijing 100004, P.R. ChinaPhone: +86-10-6590-9230

• KoreaANRITSU CORPORATION8F Hyun Juk Bldg. 832-41, Yeoksam-dong, Kangnam-ku, Seoul, 135-080, KoreaPhone: +82-2-553-6603Fax: +82-2-553-6604

• AustraliaANRITSU PTY LTD.Unit 3/170 Forster Road Mt. Waverley, Victoria, 3149,AustraliaPhone: +61-3-9558-8177Fax: +61-3-9558-8255

• TaiwanANRITSU COMPANY INC.7F, No. 316, Sec. 1, NeiHu Rd., Taipei, TaiwanPhone: +886-2-8751-1816Fax: +886-2-8751-1817

Specifications are subject to change without notice.

Catalog No. MD8480C-E-A-1-(1.00) Printed in Japan 2005-6 W/CDT

050114

Printed on 70% Recycled Paper

Model/Order No. Model Name Remarks

— Application Parts —J1263 W-CDMA interface cableJ1264 N-SMA adaptorJ0658 Adaptor SMA, L-typeP0019 TEST USIM001 for W-CDMAP0027 W-CDMA/GSM Test USIM for W-CDMA/GSM (Authentication key varies from that of P0019)

MD8480C requires PC∗ 1and Microsoft Visual C++ Version6.0 or .NET∗ 2.

∗ 1: PC is for controlling the MD8480C. The following is the required spec; OS: Windows 2000/XP (include SP2), CPU: PentiumIII 600 MHz or better, Memory: 256Mbyte or overInterface:RS-232C, Ethernet, 10Base-T/100Base-Tx, CD-ROM drive

∗ 2: Microsoft Visual C++ Version 6.0 or .NET is a registered trademark of Microsoft Corporation in USA and other countries.Microsoft Visual C++ Version 6.0 or .NET is standard edition available.

Date post:	19-Jan-2022
Category:	Documents
Upload:	others
View:	4 times
Download:	0 times

MD8480C - TestMart

Documents