Feature Summary:○ 1 to 4 axes of servo motor drive○ Integrated Galil motion controller○ Ethernet or RS-232 interface○ 48 & 75 VDC motor supply option○ Integrated motor power control system○ Compatible with all Primatics positioning stages as well as 3rd party motors and stages○ Easy to program with support for DOS, Linux and all versions of Windows○ 110 or 220 VAC, 50/60 Hz input
MDC2100 Motor Drive Chassis MDC2100S E R I E S
Performance Specifications MDC2100Number of Motion Axes 1 to 4Motor Compatibility Brush and brushless rotary and linear servoMotion Controller Galil 21x3 SeriesMotor Voltage (VDC) 48 or 75VDCContinuous Output Power (watts) 700Drive Current (A) 7 cont / 10 peakDimensions (H x W x D) (mm) 111.1 x 304.8 x 327.0Operating Temperature (deg C) 0 to 45Storage Temperature (deg C) 0 to 75Weight (kg) 15
OverviewThe Primatics MDC2100 is a highlyintegrated multi-axis motion controlsystem. A Galil high performancemotion controller is embedded, offeringadvanced features such as PID compen-sation with velocity and accelerationfeed-forward, program memory withmultitasking for simultaneously runningup to four programs, and uncommittedI/O for synchronizing motion withexternal events. Modes of motionincluding point-to-point positioning,jogging, linear and circular interpolation,contouring, electric gearing and ECAM.The MDC2100 uses a simple, English-like command language which makes it
MDC2100 Back View
very easy to program. Communicationdrivers are available for DOS, Linuxand all current Windows operatingsystems. RS232 & Ethernet 10-base-Tare standard communication interfaces.
DrivesAll power supplies, wiring and safetycircuits are contained in the chassis. Each axis can drive brush or brushless servo motors with encoder feedback. Gain and Current limits are programmable. For stepper drives, see the MDC2200. For a mix of stepper and servo, see the MDC1400.
For more information and a completedatasheet, go to www.primatics.com
111.1
3.2
327.0
304.8
Model Series1-4 Axis Controller . . . . . . . . . . . . . . . . . . . . . .MDC2100
Number of Axes1 Axis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Axis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Amplifier Bus Voltage48V, 700W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48VW1
Driver Card*Brushless Servo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D1
3 Axis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Axis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
60V, 700W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60VW1
MDC2100 -4 -48VW1 -D1 -D1 -D1 -D1 -XXXX
MODEL NUMBER CONFIGURATION OPTIONS: SAMPLE MODEL NUMBER:
*Specify each axis
1234
Call factory for custom controller interfaces.1
Other codes assigned by factory.
32114 Mallard Ave., PO Box 409, Tangent, OR 97389-0409, USA | Phone: [541] 791-9678 | Toll Free: [888] 754-3111 | Fax: [541] 791-9410www.primatics.com
Last Updated 09/13/2007
Customization Code (optional)
220VAC operation with a NEMA 6-15 plug. . . . . . .220US220VAC operation with a European (Schuko) plug . . .220EU220VAC operation with a British Standard plug . . .220BS
Leave blank for 110VAC operation