MDPE FITTINGS & PIPE SECTION 2 Code Size Unit 1 Section 2 August 2018 JOHN GUEST MDPE PIPE - SPEEDFIT BLUE UNDERGROUND FITTINGS APPLICATIONS Speedfit underground fittings for metric size polyethylene cold water service pipe have been designed for connection of: • Blue MDPE pipes to BS 6572 - used for underground service pipes for potable water. • Black MDPE pipes to BS6730 - used for conveyance of potable water above ground or for industrial services above or below ground. • Pipe to ISO 161/1, ISO 3607 and DIN 16893. FEATURES • A collet with stainless steel teeth grips the pipe and an ‘O’ ring provides a permanent leak proof seal. • For metric size polyethylene cold water service pipe • Fast installation time • Durable - high resistance to impact • High resistance to pull out • Reliable trouble free connection • Insert included in packs Maximum working pressure 16 bar @ 20°C DO NOT USE FOR HOT WATER, GAS, FUEL OIL OR COMPRESSED AIR EQUAL TEE JGT20 20mm Each JGT25 25mm Each JGT32 32mm Each REDUCING TEE A x B x A JGRT322532 32 x 25 x 32mm Each EQUAL STRAIGHT CONNECTOR JG20 20mm Each JG25 25mm Each JG32 32mm Each REDUCING STRAIGHT CONNECTOR JGR2520 25 x 20mm Each JGR3225 32 x 25mm Each PE-PEX COUPLER A x B JGP2015 20 x 15mm Each JGP2515 25 x 15mm Each JGP2522 25 x 22mm Each JGP3228 32 x 28mm Each A A B A B
Transcript
MDPE FITTINGS & PIPE
SECTION 2
Code Size Unit
PB Section 2 1Section 2August 2018 August 2018
JOHN GUEST MDPE PIPE - SPEEDFIT BLUE
UNDERGROUND FITTINGS APPLICATIONS
Speedfit underground fittings for metric size polyethylene cold water service pipe have been designed for connection of:• Blue MDPE pipes to BS 6572 - used for underground service pipes for potable water.• Black MDPE pipes to BS6730 - used for conveyance of potable water above ground or
for industrial services above or below ground.• Pipe to ISO 161/1, ISO 3607 and DIN 16893.
FEATURES• A collet with stainless steel teeth grips the pipe and an ‘O’ ring provides a permanent
leak proof seal.• For metric size polyethylene cold water service pipe• Fast installation time• Durable - high resistance to impact• High resistance to pull out• Reliable trouble free connection• Insert included in packs
Maximum working pressure 16 bar @ 20°C
DO NOT USE FOR HOT WATER, GAS, FUEL OIL OR COMPRESSED AIR
EQUAL TEEJGT20 20mm EachJGT25 25mm Each JGT32 32mm Each
REDUCING TEE A x B x A JGRT322532 32 x 25 x 32mm Each
EQUAL STRAIGHT CONNECTORJG20 20mm EachJG25 25mm EachJG32 32mm Each
REDUCING STRAIGHT CONNECTORJGR2520 25 x 20mm EachJGR3225 32 x 25mm Each
PE-PEX COUPLER A x BJGP2015 20 x 15mm EachJGP2515 25 x 15mm EachJGP2522 25 x 22mm EachJGP3228 32 x 28mm Each
A
A
B
A B
Code Size Unit
MDPE FITTINGS & PIPE
SECTION 2
2 Section 2 3Section 2August 2018 August 2018
MALE ADAPTORJGM20 20mm EachJGM25 25mm EachJGM32 32mm EachJGM3240 32mm x 40mm (A x B) Each
FEMALE ADAPTORJGF20 20mm EachJGF25 25mm Each
EQUAL ELBOWJGE20 20mm EachJGE25 25mm EachJGE32 32mm Each
STEM ELBOW A x B JGSE 25 x 20mm EachJGSE25 25 x 25mm EachJGSE32 32 x 32mm Each
STOP TAP A x BJGST2020 20mm EachJGST2515 25 x 15mm EachJGST2522 25 x 22mm EachJGST2525 25mm EachJGST3232 32mm Each
WALL PLATE ELBOWJGWPE2014 20 x 1/2” EachJGWPE2514 25 x 1/2” EachJGWPE2516 25 x 3/4” Each
END STOPJGES20 20mm EachJGES25 25mm Each
INSERTJGPI20 20mm EachJGPI25 25mm EachJGPI32 32mm Each
A B
B
A
A
B
MDPE FITTINGS & PIPE
SECTION 2
2 Section 2 3Section 2August 2018 August 2018
SAB (ESSE) MEDIUM DENSITY FITTINGS
B
BLUESEAL is a range of Polypropylene compression fittings used to connect PE pipe up to 16 bar (PN 16). Blueseal has an innovative sealing system consisting of a rubber gasket and a blue thrust ring which ensures water tightness. The range of Blueseal fittings consists of various models and sizes ranging from 16mm to 110mm in diameter.
Blueseal is easy to fit, fast to install and ensures a perfect water tightness even with scratched pipe.
• Suitable for contact with potable water • Easy Pipe Insertion • 10-16 bar rated at 20°C • Quick Assembly • Ideal for joining effluent spraylines and main-lines• Watermark Level 1
Grip RingPolyacetale (POM)
BodyCopolymer Polypropylene (PP)
NutCopolymer Polypropylene (PP)
MDPE FITTINGS & PIPE
SECTION 2
4 Section 2 5Section 2August 2018 August 2018
Cut the pipe square, remove burrs.
Undo the nut to the last thread.
Leave the nut on the fitting while inserting the pipe.
Chamfering of the pipe end will ease insertion of the pipe.
Twist the pipe into the fitting through the Blueseal to the pipe stop.
Tighten the nut firmly.
Use a wrench for final tightening of sizes 40 and above.
The nut should be screwed tightly, however there is no need for the nut to actually meet the body shoulder.
MALE COUPLINGSEMC20 20mm x 1/2” BSP 16EMC25 25mm x 3/4” 16EMC2525 25mm x 1” 16EMC32 32mm x 1” 16EMC3220 32mm x 3/4” 16EMC3232 32mm x 11/4” 16EMC40 40mm x 11/4” 16EMC4025 40mm x 1” 16EMC4040 40mm x 11/2” 16EMC50 50mm x 11/2” 16EMC5050 50mm x 2” 16EMC63 63mm x 2” 16EMC6332 63mm x 11/4” 16EMC75 75mm x 21/2” 16EMC90 90mm x 3” 16EMC9050 90mm x 2” 16EMC110 110mm x 4” 16
FEMALE COUPLINGSEFC20 20mm x 1/2” BSP 16EFC2020 20mm x 3/4” 16EFC25 25mm x 3/4” 16EFC2525 25mm x 1” 16EFC32 32mm x 1” 16EFC3220 32mm x 3/4” 16EFC3232 32mm x 11/4” 16EFC40 40mm x 11/4” 16
MDPE FITTINGS & PIPE
SECTION 2 CONTENT
Code Size PN Rating
6 Section 2 7Section 2August 2018 August 2018
FEMALE COUPLINGSEFC50 50mm x 11/2” 16EFC63 63mm x 2” 16EFC75 75mm x 2 1/2" 10EFC90 90mm x 3" 10EFC110 110mm x 4" 10
MALE ELBOWSEME20 20mm x 1/2" BSP 16EME25 25mm x 3/4" 16EME3220 32mm x 3/4" 16EME32 32mm x 1” 16EME40 40mm x 11/4" 16EME4040 40mm x 11/2" 16EME50 50mm x 11/2" 16EME63 63mm x 2" 16EME75 75mm x 21/2” 16EME90 90mm x 3" 16EME110 110mm x 4" 16
FEMALE ELBOWSEFE20 20mm x 1/2 " BSP 16EFE2020 20mm x 3/4" 16EFE25 25mm x 3/4" 16EFE3220 32mm x 3/4" 16EFE32 32mm x 1” 16EFE40 40mm x 11/4" 16EFE50 50mm x 11/2" 16EFE63 63mm x 11/2" 16EFE6340 63mm x 2" 16EFE75 75mm x 21/2" 10EFE90 90mm x 3" 10EFE110 110mm x 4” 10
FEMALE TEESEFT20 20mm x 1/2” x 20mm 16EFT25 25mm x 3/4” x 25mm 16EFT32 32mm x 1” x 32mm 16 EFT40 40mm x 11/4” x 40mm 16EFT50 50mm x 11/2” x 50mm 16EFT63 63mm x 2” x 63mm 16EFT75 75mm x 21/2”x 75mm 10EFT90 90mm x 3” x 90mm 10EFT110 110mm x 4” x 110mm 10
REDUCING TEESERT2520 25 x 20mm 16ERT3220 32 x 20mm 16ERT3225 32 x 25mm 16ERT4025 40 x 25mm 16ERT4032 40 x 32mm 16ERT5032 50 x 32mm 16ERT5040 50 x 40mm 16ERT6340 63 x 40mm 16ERT6350 63 x 50mm 16
REDUCING COUPLINGSERC2520 25 x 20mm 16ERC3220 32 x 20mm 16ERC3225 32 x 25mm 16ERC4025 40 x 25mm 16ERC4032 40 x 32mm 16ERC5032 50 x 32mm 16ERC5040 50 x 40mm 16ERC6332 63 x 32mm 16ERC6340 63 x 40mm 16ERC6350 63 x 50mm 16
MDPE FITTINGS & PIPE
SECTION 2
Code Size
8 Section 2 9Section 2August 2018 August 2018
SLIP COUPLINGSWithout Centre Lip - Fitting does not have a pipe stop which allows the pipe to slide all the way through the fitting. This enables the fitting to slide along the pipe and then back into position for connection.ESC25 25mm 16ESC32 32mm 16ESC40 40mm 16ESC50 50mm 16ESC63 63mm 16
MDPE BRASS THREADED FITTINGBrass thread eliminates cross threading and split threadsEliminates the need for a Male/Female Socket or Reducer2 Piece seal to ensure the fitting is water tightThread is pre-roughenedNut has flattened edges to ensure a good grip for easy installation
BRASS FEMALE COUPLINGEFC20B 20mm x 1/2" 16EFC25B 25mm x 3/4" 16EFC32B 32mm x 1" 16EFC40B 40mm x 1 1/4" 16EFC50B 50mm x 1 1/2" 16EFC63B 63mm x 2" 16
BRASS MALE COUPLINGEMC20B 20mm x 1/2” 16EMC25B 25mm x 3/4” 16EMC32B 32mm x 1” 16EMC40B 40mm x 1 1/4” 16EMC50B 50mm x 1 1/2” 16EMC63B 63mm x 2” 16
MDPE FITTINGS & PIPE
SECTION 2
Code Size
10 Section 2 11Section 2August 2018 August 2018
BRASS FEMALE ELBOWEFE20B 20mm x 1/2” 16EFE25B 25mm x 3/4” 16EFE32B 32mm x 1” 16EFE40B 40mm x 1 1/4” 16EFE50B 50mm x 1 1/2” 16EFE63B 63mm x 2” 16
BRASS MALE ELBOWEME20B 20mm x 1/2” 16EME25B 25mm x 3/4” 16EME32B 32mm x 1” 16EME40B 40mm x 1 1/4” 16EME50B 50mm x 1 1/2” 16EME63B 63mm x 2” 16
TAPPING SADDLES - SABWith 304 Stainless Steel Nuts and Bolts for Medium Density PE Pipe.
ETS2515 25mm x 1/2" BSPETS2520 25mm x 3/4"
ETS3220 32mm x 3/4"
ETS3225 32mm x 1"ETS4020 40mm x 3/4"
ETS4025 40mm x 1"ETS5020 50mm x 3/4"
ETS5025 50mm x 1"ETS6320 63mm x 3/4"
ETS6325 63mm x 1"ETS6332 63mm x 11/4 "ETS6340 63mm x 11/2"ETS7525 75mm x 1"ETS7540 75mm x 11/2"ETS7550 75mm x 2”ETS9025 90mm x 1"ETS9040 90mm x 11/2"ETS9050 90mm x 2"ETS11025 110mm x 1"ETS11032 110mm x 11/4"ETS11040 110mm x 11/2"ETS11050 110mm x 2"
MDPE FITTINGS & PIPE
SECTION 2
Code Size
12 Section 2 PBSection 2August 2018 August 2018
BLUELINE MEDIUM DENSITY POLYETHYLENE PIPE
• Manufactured dimensionally to AS/NZS 4130• Rated 12.5 BAR 181 psi• Pressure rating stipulated is the recommended maximum working pressure at 20°C• Can be joined using mechanical compression fittings complying with AS/NZS 4129• Can also be joined by butt fusion welding or electrofusion couplings.• For cold water underground use -not suitable for sunlight exposure
APPLICATIONS• Water distribution for town, rural and irrigation projects.• Rider mains for urban water supply• Cold water plumbing reticulation• Household water connections from the main supply• Compressed air lines. O.D. O.D. MEAN IDMD2025 20mm x 25m 20 16.1MD2050 20mm x 50m 20 16.1MD20100 20mm x 100m 20 16.1
MD2525 25mm x 25m 25 20.1MD2550 25mm x 50m 25 20.1MD25100 25mm x 100m 25 20.1
MD3225 32mm x 25m 32 25.9MD3250 32mm x 50m 32 25.9MD32100 32mm x 100m 32 25.9
MD4025 40mm x 25m 40 32.4MD4050 40mm x 50m 40 32.4MD40100 40mm x 100m* 40 32.4
MD5025 50mm x 25m 50 40.4MD5050 50mm x 50m 50 40.4MD50100 50mm x 100m 50 40.4 MD6325 63mm x 25m 63 51.1MD6350 63mm x 50m 63 51.1MD63100 63mm x 100m* 63 51.1 * Available on request
