174
MEASUREMENT AND TEST EQUIPMENT
APARATOS DE MEDICIÓN Y DE PRUEBA
Battery tester for starting batteries
CHARACTERISTICS :
systems
Probador de baterías para baterías de arranque
CARACTERÍSTICAS :
pruebas
BAT/27629
BAT/35423
Battery tester for closed lead-acid batteries and motorcycle batteries Displays the capacity in % of the original capacity
For 12V batteries of 2 - 30Ah
Voltmeter 1V - 15V
Quick, easy and accurate
Probador de baterías selladas de plomo-ácido de moto Indica la capacidad en % de la capacidad original
Para baterías de 2 - 30Ah
Voltímetro 1V - 15V
BAT/35425
Battery tester for closed lead-acid batteries and motorcycle batteries Displays the capacity in % of the original capacity
For 12V batteries of 2 - 200Ah
Quick, easy and accurate
Probador de baterías selladas de plomo-ácido de moto Indica la capacidad en % de la capacidad original
Para baterías de 2 - 200Ah
BAT/29179
Battery tester for closed lead-acid batteries (VRLA / SLA)Simulates a discharge test in a few seconds. For 12V closed lead acid
batteries of 1.2Ah – 200Ah.
Displays the capacity, voltage and temperature.
Indicates when the battery voltage is too low.
Quick, easy and accurate.
Probador de baterías selladas de plomo-ácido de moto (VRLA / SLA)Simulación de una prueba de descarga en algunos segundos.
Para baterías selladas de plomo-ácido de 1,2Ah - 200Ah.
Indica la capacidad, el voltaje y la temperatura.
Indica si el la tensión de la batería es demasiada baja.
Battery tester for starting batteries
CHARACTERISTICS :
Probador de baterías para baterías de arranque
CARACTERÍSTICAS :
pruebas
BAT/27627
BUDGETBUDGET
BUDGETBUDGET
BUDGETBUDGET
BAT/26867
Printing paper Papel de impresión
WWW.BATTERYSUPPLIES.BE175
MEASUREMENT AND TEST EQUIPMENT
APARATOS DE MEDICIÓN Y DE PRUEBA
BAT/26759: inSPECT 45
Tests 6/12 Volt automotive lead acid, AGM,
Spiral and GEL batteries.
Prueba 6/12 V automotive plomo-ácido,
AGM, espirales y gel.
Battery analyzers
All Midtronics testers are based on the principle of measuring conductance.
By accurately analyzing this measuring method, Midtronics has created the ability
to test the battery in a quick, simple, safe and accurate way. Furthermore, this
technology enables the user to test partially discharged batteries. By this method,
the condition of the battery is measured independently of the charging state.
This patented technology has been tested and accepted worldwide. Laboratory
tests and daily experiences show that it’s the only practical method for an accurate
assessment of a battery while being discharged.
Analizadores de batería
Todos los probadores Midtronics se basan en el principio de la medición de la
conductancia.
Por analizar este método de medición con exactitud, Midtronics ha creado la
posibilidad de probar la batería de una manera rápida, sencilla, segura y precisa.
Además, esta tecnología permite al usuario probar baterías parcialmente
descargadas. Se mide independientemente del estado de carga el estado de la
batería.
Esta tecnología patentada ha sido probada y aceptada en todo el mundo. Pruebas
de laboratorio y las experiencias cotidianas demuestran que es el único método
práctico para una evaluación precisa de una batería descargada.
Battery Management Innovation™
BAT/26764: inSPECT 85
Tests 12V Heavy Duty batteries,
24V Heavy Duty battery sets, 6/12V
utomotive batteries and 12/24 V
tart and charge systems.
Prueba baterías 12V Heavy Duty,
pares de batería 24V Heavy Duty, ba-
erías automoción 6/12V y sistemas
de arranque y de carga 12/24 V.
BAT/26763: inSPECT 65
Tests 6/12 Volt automotive lead acid, AGM, Spiral and GEL batteries.
12/24 Volt start and charge systems.
Prueba 6/12 V automotive plomo-ácido, AGM, espirales y gel.
AT/26759 ii: inSPECT 45 BATBAT/26763: i
T
2
a
st
P
p
te
d
T 65
inSPECT customers
The inSPECT Series offer a complete range of products for the
professional workshops or battery retailer. An inSPECT tester makes
automotive battery testing easy. The inSPECT conductance analyzers
are designed to provide accurate test results for all modern automotive
batteries.
Target customers are the battery retailer, the professional workshops
and truck workshops. The modern workshop demands more to
diagnose the
battery and the electrical system. The inSPECT reduces time to test,
increases sales and profits and improves customer satisfaction.
Balance testing
The batteries in 24 volts systems are often not in the same condition.
When this is the case, the set is not in balance. As a result the charge
voltage is not equally divided over the 2 batteries, resulting in
a balance test to clearly indicate if the batteries in the set can work
together.
La clientela inSPECT
la serie inSPECT ofrece una paleta completa de probadores para
los talleres profesionales y distribuidores de baterías. Un probador
inSPECT facilita testar baterías de arranque. Los probadores inSPECT
son diseñados para generar resultados de prueba muy exactos para
todo tipo de batería de arranque moderno. Los clientes objetivo son
los minoristas de la batería, los talleres profesionales y talleres de
camiones. El taller más moderno exige diagnosticar la batería y el
sistema eléctrico. El inSPECT reduce el tiempo de prueba, aumenta las
ventas y beneficios y mejora la satisfacción del cliente.
Pruebas de equilibrio
A menudo, las baterías en los sistemas de 24 voltios no están en la
misma condición. Cuando este es el caso, el conjunto no está en
equilibrio. Este tiene la consecuencia que la tensión de carga no se
divide igualmente en las dos baterías, lo que resulta en perjuicio
una prueba de equilibrio para indicar claramente si las baterías en el
conjunto pueden trabajar juntos.
Feature Características inSPECT 45 inSPECT 65 inSPECT 85
AGM, Spiral and GEL Testingp g Prueba AGM, GEL y Espiraly p -Starting and Alternator Diagnosticsg g Diagnosis del sistema de partida y de cargag p y g -Surface charge removal procedureg p Procedimiento de eliminación de tensión de superficiep
Temperature compensationp p Compensación de temperaturap p - -Full range temperature compensationg p p Compensación de temperatura “Full range”p p g -Dynamic Response Testingy p g Prueba de Respuesta Dinámicap - -Voltmeter mode (startup and menu)p Modo voltímetro (inicio y menú)y -Workshop address (on printout)p p Dirección de Taller (en copia impresa)p p
Coupon modep Modo de descuento -Quality Control Modey Modo de Control de Calidad -Date and time Fecha y horay -Data export to printer or DVP-100p p La exportación de datos a la impresora o DVP-100p p
Enhanced test counter Contador de prueba mejoradap j -Routine for “Special Vehicles”p Rutina para los “vehículos especiales”p p - -Truck battery routiney Rutina batería de camión - -Balance Testing (truck)g Balance de Prueba (camión) - -Generate battery pair (truck)y p Generar el par de la batería (camión)p - -
BAT/26859PrinterPrinter
176
MEASUREMENT AND TEST EQUIPMENT
APARATOS DE MEDICIÓN Y DE PRUEBA
BAT/34937
Digital amperepincers for AC
eremeter. With display hold function.
ement ranges for DC- and AC-current
Continuity test with buzzer. Protective
urement strings included.
Pinzas amperimétricas digitales
Con función de mantenimiento de datos en la pantalla.
Varios alcances de medida para la corriente continua
y alterna y la resistencia. Prueba de continuidad
con zumbador. Cubierta protectora y cordones de
medición.
DC voltage Tensión DC 1 V - 1000 V (±0,5%)
AC voltage Tensión AC 1 V - 750 V (±0,6%)
AC current Corriente AC 0,1 A - 1000 A (±2,0%)
200 ohms - 20 k ohms (±2%)
Isolation test Prueba de aislamiento 200 M ohms max.
Max. display Pantalla máxima 1999
Battery Batería 9 V (1 x PP3)
Dimensions Dimensiones 240 x 93 x 42 mm
ep
pe
re
. C
asu
BAT/34937
Digital ampere
Digital AC am
Several measu
and resistance
cover and mea
Electronic battery tester + Digital voltmeter
Appropriate for all types 12 VOLT batteries, also
for maintenance-free batteries.
Selector switch 100 to 800 Amp. (20-160Ah), to
examine all types of batteries of cars and heavy
weight vehicles. Power supply 9V battery (not
included). Indication “low battery” when the
battery is low.
Reading of the battery state: the display
indicates the capacity of the battery in volt.
Reading under charge: The operator adjusts
the cold-start capacity with a selector switch and
then presses the button “TEST”. The instrument
does the test electronically.
Voltmeter: scale to 19,99V: this instrument
can also be used as a voltmeter for the carrying
out of several measurements.
Probador electrónico de baterías + voltímetro digital
12 VOLTIOS, también para modelos de “libre
mantenimiento”. Selector de 100 a 800 Amp.
(20-160Ah), para examinar todos los tipos de
baterías coches y camiones. Alimentación por
batería de 9V (no incluida). Indicación “low
battery” para baterías descargadas.
Indicación de la condición de la batería:
la pantalla indica la potencia en voltios de la
batería.
Indicación de la tensión bajo carga: el
operador elige el valor de arranque de la batería
y apreta “TEST”. El instrumento realiza la prueba
electrónicamente.
Voltímetro: escala hasta 19,99V: se puede
utilizar este instrumento como voltímetro para
medir la tensión.
BAT/23030
BAT/26523
Digital multimeter
Characteristics :
a practical case
Multímetro digital
Características :
estuche práctico
Prueba de diodo 200 mV => 1000 mV
Alternating voltage AC
Tensión alterna AC
200 mV => 700 mV
Direct current DC
Corriente directa DC
200 μA => 20A
Alternating current AC
Corriente Alterna AC
200 μA => 20A
200 Ohm => 20 Mohm
Frequency
Frecuencia
20 KHz
Capacity
Capacidad
2000 pF => 20 μF
Transistor hFE test
Transistor de prueba hFE
0 ~ 1000
Temperature
Temperatura
0°C => 1000
Diode test
Prueba de diodo
BUDGETBUDGET
PinBUDGETBUDGET
WWW.BATTERYSUPPLIES.BE177
MEASUREMENT AND TEST EQUIPMENT
APARATOS DE MEDICIÓN Y DE PRUEBA
BAT/26622
REF. BAT/37292 BAT/37294
readout / lectura LED LCD
series / serie 4.5 ~ 19.99V 8.0 ~ 39.99V
tolerance / tolerancia ± 0.03V ± 0.03V
voltage / voltaje 6V, 12V 12V, 24V
BAT/19665
BAT/37281
BAT/37292 - BAT/37294
Battery tester 100 Amp
- Tests 6V & 12V batteries up to 1000CCA
- Tests the state of the battery, cold-start
current, charging system and starting
condition
Probador de baterías 100 amp
- Prueba de baterías de 6V y 12V hasta
1000CCA
- Prueba del estado de la batería, de la
corriente de arranque en estado frío, del
sistema de carga y de la condición de
arranque
Battery charging system tester
- Microprocessor controlled tester for 12V
battery systems
- With LED digital display
- Switches automatically off after 10 seconds
of testing and indicates the voltage
- 3 stage tester : LED polarity control function,
tests charging state of the battery and
charging system
Probador del sistema de carga
- Aparato de prueba controlado por
microprocesador para sistemas de batería
12V
- Con display digital LED
- Se apaga automáticamente después de 10
segundos y muestra el voltaje
- Aparato de prueba en 3 fases: control de la
polaridad, prueba del estado de carga de la
batería y del sistema de carga
Carbon battery tester 500 Amp
- Temperature compensation good/
bad in the voltmeter guarantees a
precise charging test
- The separate volt- & amperemeter
display the results
- Tests batteries up to 1000 CCA
- Tests 12V batteries, alternators,
regulators & starters
- With built-in alarm
Probador “barra de carbono” 500 amp
- Compensación de temperatura bien/
mal en el voltímetro asegura una
prueba de carga exacta
- El voltímetro y el amperímetro indican
los resultados separados
- Prueba baterías hasta 1000CCA
- Prueba baterías 12V, alternadores,
reguladores y aparatos de arranque
- Con alarma incorporada
Digital Voltmeter
- Protected against reversed polarity
- Over voltage proof
- Control of the charging system
- With charge status table on the front
Voltímetro digital
- Protección contra polaridad inversa
- Protección contra sobretensión
- Control del sistema de carga
- Con tabla de estados de carga
BUDGETBUDGET
178
MEASUREMENT AND TEST EQUIPMENT
APARATOS DE MEDICIÓN Y DE PRUEBA
Tester for single cover batteries
This tester can test the state of the battery
and the functioning of the voltage regulator,
and when the resistance is switched off, it can
measure the voltage. 6 +12V
Probador
Con este aparato de prueba, se puede verificar
el estado de carga de la batería con resistencia
conectado, o medir la tensión con resistencia
desconectada. 6 +12V
Volt/Ampere tester max 600 Amp
This tester has two instruments, an ammeter
and a voltmeter which can carry out
measurements at the same time.
The voltmeter has two ranges: 0 to 16 volt, 0
to 32 volt.
The ammeter has three ranges: 0 to 600 Amp,
0 to 200 Amp, 0 to 20 Amp.
The ranges are adjusted through a switch.
The spiral cable has a length of three meter
and will be completely delivered with three
battery clamps. Clear instructions enclosed.
Probador Voltios/amperios max 600 amp
Este aparato de prueba es equipado con 2
instrumentos (voltímetro y amperímetro) que
pueden hacer mediciones simultáneamente.
El voltímetro tiene dos escalas: 0 - 16 Voltios, 0
- 32 Voltios. El amperímetro tiene tres escalas:
0 - 600 amperios, 0 - 200 amperios, 0 - 20
amperios.
Se encuentran los cables en una vaina a
espiral de 3 metros de longitud. Modo de
empleo incluido.
BAT/23028
BAT/23022
Detector
Precision instrument. This tester can test the
state of the battery and the functioning of the
voltage regulator, and when the resistance
is switched off, it can measure the voltage.
Pilot light for switched-on resistance. Large
indicating scale. 6 +12V
Probador
Con este aparato de prueba, se puede verificar
el estado de carga de la batería con resistencia
conectado, o medir la tensión con resistencia
desconectada. Lámpara de control para
resistencia conectada.
Resistencia incorporada. Gran y clara escala de
lectura. 6 +12V
BAT/23024
Tester for 6-24V Dc systems
Multifunctional device for a car electrician.
Probador para sistemas Dc 6-24V
Aparato multifuncional para la electricidad de
coches.
BAT/18777
WWW.BATTERYSUPPLIES.BE179
MEASUREMENT AND TEST EQUIPMENT
APARATOS DE MEDICIÓN Y DE PRUEBA
Digital multimeter to measure voltage and
resistance.
Multímetro digital para medir la tensión y la
resistencia.
Acid hydrometer Hidrómetro para ácido
Voltage tester 110/220/380V - LED Aparato de prueba de voltaje 110/220/380V
– LED
Test lamp 6/12/24V
Test lamp 6/12V
Lámpara de prueba 6/12/24V
Lámpara de prueba 6/12V
Multitester 12V – VOLT/BAT/ALT
Easy manageable. To control the battery and
the alternator..
Multiprobador 12V – VOLT/BAT/ALT
fácil de manejar. Para controlar la batería y el
alternador.
Continuity tester for 12V systems
Indicates the voltage through coloured LEDs.
Probador de continuidad para los sistemas 12V
Indica el voltaje por LEDs colorados
Volttester for 6,5V up to 32V DC
With magnetic strip.
The point: neg. & the clip: pos.
Probador de voltaje para 6,5V hasta 32V DC
Con cinta magnética.
El punto: neg. Y el clip: pos.
BAT/18799
BAT/18797
BAT/17655
BAT/18125
BAT/18127
BAT/18129
BAT/13865
BAT/13883
Acid hydrometer
Simple and clear read off
Temperature compensation
in acid proof cover
Hidrómetro para ácido
Lectura simple & clara
Compensación de temperatura
En funda resistente al ácido
BAT/95602
BUDGETBUDGET
BUDGETBUDGET
180
MEASUREMENT AND TEST EQUIPMENT
APARATOS DE MEDICIÓN Y DE PRUEBA
BAT/19635
Discharge tester
For 6 & 12 VOLT starting and semi-traction
batteries.
With two selectable charging possibilities:
125 or 250 Amps. Tests automatically every
10 seconds.
Probador de descarga
Para baterías de arranque y semitracciones 6
y 12 voltios
Con 2 posibilidades de carga: 125 o 250 amps.
Prueba automática cada 10 segundos.
Zivan Capacity tester
Controlador de capacidad
Para baterías de tracción y
estacionarias.
Conductivity tester
Controls the conductivity
values (micro Siemens) of your
demineralised water.
Probador de conducción
Controla la conductividad
(valor micro Siemens) del agua
desmineralizada.
Discharge tester
Up to 250 Amps for 2 Volt traction cells.
Probador de descarga
Hasta 250 amps para los elementos de
tracción 2 voltios.
Discharge tester
Up to 375 Amps for 2 Volt traction cells.
Probador de descarga
Hasta 375 amps para los elementos de
tracción 2 voltios.
BAT/15150
BAT/15151
BAT/21594 BAT/14934
Discharge tester
Up to 120 Amps for 6 & 12 Volt starting and
semi-traction batteries.
Probador de descarga
Hasta 120 amps para las baterías de arranque
y de semitracción de 6 y 12 voltios.
BAT/19634
l d
BUDGETBUDGET
BUDGETBUDGET
l i ll
BUDGETBUDGET
WWW.BATTERYSUPPLIES.BE181
MEASUREMENT AND TEST EQUIPMENT
APARATOS DE MEDICIÓN Y DE PRUEBA
Battery capacity tester
With this processor controlled instrument, very accurate
measurements can be carried out, by discharging the battery with a
selected constant current.
It’s possible to test the starting capacity, to see if it’s possible to start
an engine. It’s also possible to measure the reserve capacity of any
battery; only the desired parameters have to be selected (current,
output current, time) and the test can be started. The tester discharges
the battery automatically with the selected discharge current to the
selected output-current.
Alternator test: when you use the tester for an alternator test, you
have to connect it to the alternators and increase the discharge
current while you keep an eye on the voltage. Thanks to this method,
the maximum power of every alternator can be determined.
The desired information can be downloaded at your PC.
Probador de la capacidad de las baterías
Con este aparato controlado por procesador, se puede hacer
mediciones muy exactas por descargar la batería de corriente
constante.
Se puede probar la capacidad de arranque si no es posible arrancar
el motor.
Se puede también medir la capacidad reserva de cada batería;
solamente se debe seleccionar los parámetros deseados (corriente,
tensión de salida, tiempo).
El aparato de prueba descarga automáticamente la batería con una
corriente de descarga seleccionada hasta la tensión seleccionada.
Prueba del alternador: Se puede también utilizar El aparato de
prueba para hacer una prueba de alternador, gracias a este método
se puede determinar la corriente máxima de cada alternador.
Se puede transferir las informaciones en su PC.
BAT/35342 : 12V - 420ABattery capacity tester for starting and semi-traction batteries
BAT/35344 : 24V - 100ABattery capacity tester for semi-traction and traction batteries
BAT/35346 : 48V - 100ABattery capacity tester for semi-traction and traction batteries
BAT/35342 : 12V - 420AProbador de la capacidad de las baterías de arranque y de semitracción
BAT/35344 : 24V - 100AProbador de la capacidad de las baterías de semitracción y de tracción
BAT/35346 : 48V - 100AProbador de la capacidad de las baterías de semitracción y de tracción
182
MEASUREMENT AND TEST EQUIPMENT
APARATOS DE MEDICIÓN Y DE PRUEBA
BAT/31601
Battery regeneration apparatus
This device serves as regenerator (to repair) of 12V batteries, which are sulphated by
too deep discharge, self-discharge, too long standstill etc.
The device has a special charge programme to desulfate 12V batteries & it has an
adjustable current setting of 1-5 A.
It can be used for lead acid start batteries, semi-traction, traction or deep-cycle
batteries, AGM and GEL batteries.
Aparato de regeneración para baterías
Este aparato sirve a regenerar la capacidad de las bateríasde 12V, que son sulfatadas
por efecto de una descarga demasiada profunda, autodescarga, inacción demasiada
larga etc.
El aparato tiene un programa de carga especial para desulfatar baterías de 12V y un
ajuste de la corriente regulable de 1 - 5 A.
Se puede utilizarlo para baterías de plomo-ácido, semitracción, tracción o deep-
cycle, AGM y GEL.
BAT/35016
Capacity tester for batteries and charger for cyclic batteries 12V (up to 8 cycles)
Microprocessor controlled capacity tester with data logger - 12V 0.3A
– 25A
With this tester, the capacity of 12V semi-traction, traction & deep-cycle
batteries (cyclical batteries) can be tested
The device can be programmed from 1 to 8 charge- and discharge
cycles; it measures the charged and discharged capacity (Ah) and the
duration of every cycle.
The device gives a picture of the capacity of the battery (do I have
enough capacity) and of the charging process of your battery charger
(can my charger charge the battery enough and correctly).
After the charge/discharge process, the device can be connected to the
PC and reproduces the correct charging/discharging curves.
These curves tell you everything about the battery and the charger. You
see the REAL charge characteristics, you can print them... or you give a
full report of the charging and discharging process. It’s also possible to
zoom in on the curve and to export the data to Excel.
BAT/35018 - also available in 24 Volt versionCapacity tester for cyclical batteries (up to 8 cycles)Microprocessor controlled capacity tester with datalogger - 24V 0.3A -
25A
BAT/35012Capacity tester for cyclic batteries 12V (up to 300 cycles)
BAT/35014Capacity tester for cyclic batteries 24V (up to 300 cycles)
BAT/35016
Probador de la capacidad para baterías y cargador de baterías cíclicas 12V (hasta 8 ciclos)
Aparato de prueba de capacidad de baterías cíclicas con
microprocesador y registrador de datos - 12V 0,3A - 25 A
Con este aparato se puede probar la capacidad de las baterías
semitracción, tracción, deep-cycle (cíclicas) 12V.
Es posible programar el aparato para 1 a 8 ciclos de carga y de descarga,
mide la capacidad cargada y descargada (Ah) y también el tiempo de
cada ciclo.
Le da la capacidad de la batería (¿tengo bastante capacidad?) y el
procese de carga de vuestro cargador (¿mi cargador puede cargar la
batería completamente/correctamente?)
Después de la carga/descarga, se puede conectar El aparato de prueba
al PC y se pueden mostrar las curvas de carga/descarga correctas.
Estas curvas le muestran todo de la batería y del cargador. Se ve las
características VERDADERAS, se puede imprimirlas... o da un informe
completo del proceso de carga/descarga, también es posible dar un
golpe de zoom en la curva y exportar los datos a Excel.
BAT/35018 - versión está disponible en 24 VoltAparato de prueba de capacidad para baterías cíclicas (hasta 8 ciclos)Aparato de prueba de capacidad controlado por microprocesador con
registrador de datos - 24V 0,3A - 25A
BAT/35012Aparato de prueba de capacidad para baterías cíclicas 12V (hasta 300 ciclos)
BAT/35014Aparato de prueba de capacidad para baterías cíclicas 24V (hasta 300 ciclos)
WWW.BATTERYSUPPLIES.BE183
This data logger allows you to follow-up your battery(s) throughout their life, at charge and discharge at any time thanks to the wireless GPRS transmission!
Functioning:
The data logger is fixed on the battery cable, together with an antenna and a built-in
SIM-card.
The data logger is always connected to the battery and can’t be switched off without
interrupting the functioning of the battery. In this way, the data of battery and
charger are always available in real time.
Thanks to the supplied software, you can read-out all results at your PC and
diagrammatize them.
When the data logger is used for the first time, it’s programmed with the details of
the battery (Voltage - Ah - reference -...) and the permitted discharge values. After
that, all data are saved and transmitted by charge and discharge, according to the
specified capacity.
Let’s take a 750 Ah battery as example: you can see how much Ah is used during the
work shift (discharge period) and how much Ah is recharged during the charge. This
gives a good idea of the efficiency of the battery: it is fully used (80% discharge = 600
Ah) or it’s little used (about 30% discharge = 225 Ah).
All times are recorded: “X” hours of discharge (= functioning), “Y” hours of charge, and
“Z” hours of no use.
Are there many between-charges, does my battery charger charge the battery
correctly...: all data are recorded!
All these data are continuously stored and can be accessed at any time on your PC.
This collected information can reflect the efficiency of the battery and of the device
(forklift): how many hours did they work or did they lay idle... This can be recorded
during the entire life span and thus provide an accurate picture of the use of the
battery and the device (forklift).
The data logger records the total number of 20 parameters during the charge and
discharge. Also, data can be read-out while he fork-lift truck is in use, so you can see
how much power it consumes, when the discharge meter with pump cut-out is put
into action etc.
Average data, totals etc. can also be obtained per battery.
Este registrador de datos permite seguir su(s) batería(s) durante todasu vida, a la carga y a la descarga en cualquier momento gracias a la transmisión inalámbrica GPRS!
Funcionamiento:
El registrador de datos se fija en el cable de la batería, junto con una antena y una
tarjeta SIM incorporada.
El registrador de datos está siempre conectado a la batería y no puede ser apagado
sin interrumpir el funcionamiento de la batería. De esta manera, los datos de la
batería y del cargador están siempre disponibles en tiempo real.
Gracias al software suministrado, se puede leer todos los resultados en su PC y
diagramarlos.
Cuando se utiliza el registrador de datos por primera vez, es programado con los
detalles de la batería (tensión - Ah - referencia -...) y los valores de descarga permitidos.
Después, se guardan todos los datos y se los transmiten durante la carga y descarga,
de acuerdo a la capacidad especificada.
Tenemos como ejemplo una batería de 750 Ah: puede ver cuánto Ah se utiliza
durante el turno de trabajo (período de descarga) y cuánto Ah se recarga durante la
carga. Esto da una idea de la eficiencia de la batería: es plenamente utilizado (un 80%
de descarga = 600 Ah) o es utilizado sólo en parte (alrededor del 30% de descarga
= 225 Ah).
Todas las horas se registran: “X” horas de descarga (= funcionamiento),”Y” horas de
carga, “Z” horas de no utilización.
¿Hay muchas cargas intermedias? ¿Mi cargador de batería carga la batería
correctamente?...: ¡se registran todos los datos!
Se almacenan todos estos datos continuamente y se puede acceder en cualquier
momento en su PC.
Esta información recogida puede reflejar la eficacia de la batería y del dispositivo
(carretilla elevadora): ¿cuántas horas trabajan o se pusieron en modo inactivo?... Esto
puede ser registrado durante todo la vida útil y por tanto proporcionar una imagen
precisa de la utilización de la batería y del dispositivo (carretilla elevadora).
El registrador de datos registra en total 20 parámetros durante la carga y descarga.
Además, los datos pueden ser leídos mientras la carretilla elevadora está en uso,
para que pueda ver la cantidad de energía que consume, cuándo el indicador de
descarga con corte de bomba se pone en acción, etc.
Se pueden también obtener datos y totales medios para cada batería.
MEASUREMENT AND TEST EQUIPMENT - DATA LOGGER
APARATOS DE MEDICIÓN Y DE PRUEBA - REGISTRADOR DE DATOS
SMART. IC II
184
MEASUREMENT AND TEST EQUIPMENT - DATA LOGGER
APARATOS DE MEDICIÓN Y DE PRUEBA - REGISTRADOR DE DATOS
Important: : Importante:
BAT/35602 SMART.IC II : without GPRS - for batteries < 300 Ah / sin GPRS - para baterías < 300 Ah
BAT/35603 SMART.IC II : without GPRS - for batteries ≤ 650 Ah / sin GPRS - para baterías ≤ 650 Ah
BAT/35605 SMART.IC II : without GPRS - for batteries > sin GPRS - para baterías > 650 Ah
BAT/35604 SMART.IC II : with GPRS - for batteries < 300 Ah / sin GPRS - para baterías < 300 Ah
BAT/35607 SMART.IC II : with GPRS - for batteries ≤ 650 Ah / sin GPRS - para baterías ≤ 650 Ah
BAT/35609 SMART.IC II : with GPRS - for batteries ≤ 650 Ah / sin GPRS - para baterías ≤ 650 Ah
BAT/35606 Plug side fork-lift truck (without memory) / Enchufe lado de la carretilla elevadora (sin memoria)
BAT/35608 Plug side fork-lift truck (with memory) / Enchufe lado de la carretilla elevadora (con memoria)
BAT/35600 Display: hour counter - Ah-meter (without transponder) / Pantalla: registrador de horas - registrador AH
(sin transpondedor)
BAT/35598 Display: hour counter - Ah-meter (with transponder) / Pantalla: registrador de horas - registrador AH
(con transpondedor)
BAT/22624 Convertible card / Carta a convertir
Information:The data loggers can also be rented, so you can get a detailed report of the
state of your battery.
Información:Se pueden también alquilar los registradores de datos, así que puede
obtener un informe detallado del estado de la batería.
WWW.BATTERYSUPPLIES.BE185
This data logger is cheap, easy to use and easy to assemble.
During the life of the battery, following information is displayed:
The data can be put on your PC through the IR interface and one can follow the
battery operation with the Smart View II program:
200 working cycles (charging/discharging)
Voltage during the operation & flow chart
Date and time of the statistical data
Este registrador de datos es barato, fácil para usar y fácil para montar.
Durante la vida de la batería, se muestran las siguientes informaciones:
Se pueden poner los datos en su PC a través de la interfaz de infrarrojos y se puede
seguir la operación de la batería con el programa Smart View II:
200 ciclos de trabajo (carga y descarga)
Tensión durante el funcionamiento y diagrama de flujo
Fecha y hora de los datos estadísticos
MEASUREMENT AND TEST EQUIPMENT - DATA LOGGER
APARATOS DE MEDICIÓN Y DE PRUEBA - REGISTRADOR DE DATOS
SMART.ON
186
MEASUREMENT AND TEST EQUIPMENT - DATA LOGGER
APARATOS DE MEDICIÓN Y DE PRUEBA - REGISTRADOR DE
ReferenceReferencia Description / Descripción Ah / Battery
BAT/37081
Version / Versión 24 / 36 / 48 Volt
≤ 170
BAT/37083 170 ÷ 345
BAT/37085 345 ÷ 740
BAT/37087 ≤ 740
BAT/37089
Version / Versión 72 / 80 / 96 Volt
≤ 170
BAT/37091 170 ÷ 345
BAT/37098 345 ÷ 740
BAT/37095 ≥ 740
‚to BATTERY
POSITIVE POLE
‚‚ERYTto BATT
E POLEVENEGATIV
··to CCONNNECTORNEGGATTIVE POLE
SMART.ON
Size / Tamaño : 130 x 60 x 47 mm
Important / Importante
When ordering, please mention the data of your battery: TYPE - VOLTAGE - Ah
Al ordenar, denos los datos a su batería: TIPO - TENSIÓN - Ah
Optional accessories / Accesorios opcionales
ReferenceReferencia Description / Descripción
BAT/37097Connection cable, necessary to download the data.
Cable de conexión, necesario para la telecarga de los datos
BAT/37098 Software SMARTVIEW 2
!