MECESA IS A DESIGNER AND MANUFACTURER COMPANY SPECIALIZED IN COMPONENTS FOR INDUSTRIAL
INSTRUMENTATION LINES BORN IN 1952.
MECESA DESIGNS FOR A WIDE VARIETY OF INDUSTRIAL FIELDS LIKE ENERGY GENERATION,
OIL&GAS, CHEMICAL AND PETROCHEMICAL, WATER TREATMENT, FEEDING AND IN GENERAL ON
ANY INSTALLATION WITH INSTRUMENTATION LINES.
C.45GB (Rev.0)
COMPANY PROFILE
1 MECESA
MECANICA EGARENSE S.A.
www.mecesa.com
HEAD OFFICE AND FACTORY
Joan Monpeó 35, 08223
Terrassa, Barcelona, Spain
P: +34 937 363 500 / F: +34 937 832 462
HEAD OFFICE AND FACTORY
Joan Monpeó 35, 08223
Terrassa, Barcelona, Spain
P: +34 937 363 500 / F: +34 937 832 462
WHY MECESA?
BACKGROUND: since 1952, Mecesa supplies mechanical components for industrial instrumentation lines. As a result of
his successful career, in 1968, MECESA was awarded with the supply of the instrumentation components for erection of
the 1st Nuclear Power Plant in Spain, friendly known as "Zorita NPP".
Thereafter, Mecesa has been involved in the erection and the subsequent maintenance of all nuclear plants built in Spain.
QUALITY: Strong and robust quality system, according to ISO 9001 for industrial requirements (since 1996) and
UNE73.401 (since 1995) for nuclear requirements.
All valves, manifolds and condensate pots are tested and certified one by one to.
FULL TRACEABILITY: The certificates of origin and features of raw materials (Europe or USA) and all processes of
manufacturing, testing, storing and delivery are recorded with all details. All related documentation is stored in a
fireproof room and is available for customers until decommissioning of the NPP.
SUPPORT & CUSTOMER SERVICE: From inquiry, during offer stage, on commissioning and the subsequent maintenance,
the commercial, technical and logistic support offered by Mecesa makes of it a value supplier and a good ally.
COMPANY PROFILE
2 MECESA
MECANICA EGARENSE S.A.
www.mecesa.com
HEAD OFFICE AND FACTORY
Joan Monpeó 35, 08223
Terrassa, Barcelona, Spain
P: +34 937 363 500 / F: +34 937 832 462
HEAD OFFICE AND FACTORY
Joan Monpeó 35, 08223
Terrassa, Barcelona, Spain
P: +34 937 363 500 / F: +34 937 832 462
EXPERIENCE: SUPPLIER OF SPANISH NUCLEAR POWER PLANTS SINCE 1968
Today and from the construction of first nuclear power plant on Spain, all the owners of Spanish nuclear power plants consider
Mecesa as its supplier of instrumentation components.
Mecesa is included in the supplier list of GES from 1995, the evaluation group of suppliers of Spanish nuclear facilities, the only
authorised to issue the quality certificate of Standard of Quality Assurance in Nuclear Facilities UNE 73.401
DATE OF CONNECTION
DATE OF DISCONNECTION
NAME SPANISH
PROVINCE OWNERS
ELECTRIC POWER [MW]
DESIGN REACTOR
1968 2006 JOSÉ CABRERA (ZORITA) GUADALAJARA UNIÓN FENOSA 150,00 P.W.R.
1971 IN OPERATION STA. MARÍA DE GAROÑA BURGOS IBERDROLA, ENDESA 466,00 B.W.R.
1972 1989 VANDELLÓS I TARRAGONA HISPANO-FRANCESA DE ENERGÍA NUCLEAR 480,00 G.C.R.
1981 IN OPERATION ALMARAZ I CÁCERES IBERDROLA, ENDESA, GAS NATURAL 1035,30 P.W.R.
1983 IN OPERATION ASCÓ I TARRAGONA ENDESA 1032,50 P.W.R.
1983 IN OPERATION ALMARAZ II CÁCERES IBERDROLA, ENDESA, GAS NATURAL 1045,00 P.W.R.
1984 IN OPERATION COFRENTES VALENCIA IBERDROLA 1092,02 B.W.R.
1985 IN OPERATION ASCÓ II TARRAGONA IBERDROLA, ENDESA 1027,21 P.W.R.
1987 IN OPERATION VANDELLÓS II TARRAGONA IBERDROLA, ENDESA 1087,14 P.W.R.
1988 IN OPERATION TRILLO GUADALAJARA IBERDROLA, GAS NATURAL, HC, NUCLENOR 1066,00 P.W.R.
COMPANY PROFILE
3 MECESA
MECANICA EGARENSE S.A.
www.mecesa.com
HEAD OFFICE AND FACTORY
Joan Monpeó 35, 08223
Terrassa, Barcelona, Spain
P: +34 937 363 500 / F: +34 937 832 462
HEAD OFFICE AND FACTORY
Joan Monpeó 35, 08223
Terrassa, Barcelona, Spain
P: +34 937 363 500 / F: +34 937 832 462
GENERAL MECESA PRODUCT RANGE
The standard manufactured products are:
FITTINGS: up to 2", with connection: double ferrule compression, threaded or welded. Materials acc. to ASME/EN and
available for all applications (lock, union, adapter, reduction, dielectric union, etc.) with all designs (plug, tee, elbow,
cross, straight, for panel, etc.)
VALVES: needle, ball, check, gauge or membrane, rating up to 10.000PSI, connection: double ferrule compression,
threaded or welded. Material acc. to ASME/EN and a wide range of designs and options (purge, seat, control, CV
micrometric control, PTFE/Graphite, straight or "L" design, for panel, gauge, etc.)
MANIFOLDS: from 1 to 6 valve configurations, rating up to 10000PSI, connection: double ferrule compression, threaded,
welded or with flange. Materials acc. to ASME/EN and a wide range of options and designs (monoflange compact, with
one or two purges, actuator, PTFE/Graphite, ball stem end/ cone stem end, etc.). All operation schemes and designs are
fully compatible with leading manufacturers of transmitters.
COMPANY PROFILE
4 MECESA
MECANICA EGARENSE S.A.
www.mecesa.com
HEAD OFFICE AND FACTORY
Joan Monpeó 35, 08223
Terrassa, Barcelona, Spain
P: +34 937 363 500 / F: +34 937 832 462
HEAD OFFICE AND FACTORY
Joan Monpeó 35, 08223
Terrassa, Barcelona, Spain
P: +34 937 363 500 / F: +34 937 832 462
PROCESS INTERFACE VALVES – DOUBLE BLOCK AND BLEED (DBB): 6000PSI, connection: flange, threaded or welded.
Materials acc. to ASME/EN, PTFE/Graphite, etc.
CONDENSATE POTS / COLLECTORS: 600ºF/3625PSI, design according to service conditions or specifications informed by
customer, materials ASME/EN, connections threaded or welded, with hydrostatic test acc. to EN 10.204 3.1 as standard
and optional tests/certificates: radiograph test for welded parts, penetrant liquids test, etc.
TUBING AND PIPING: some of the most reputed European or North American brands are distributed by MECESA to
deliver complete instrumentation packages acc. to ASME/EN (ASTM A269, A213, A335, A790, B625, B626, B67 7, B68,
etc.)
SAFETY DEVICES: under strict manufacture, performance and quality specifications, MECESA develops and manufactures
pressure safety valves to Spanish nuclear power plants (100% Hastelloy)
COMPANY PROFILE
5 MECESA
MECANICA EGARENSE S.A.
www.mecesa.com
HEAD OFFICE AND FACTORY
Joan Monpeó 35, 08223
Terrassa, Barcelona, Spain
P: +34 937 363 500 / F: +34 937 832 462
HEAD OFFICE AND FACTORY
Joan Monpeó 35, 08223
Terrassa, Barcelona, Spain
P: +34 937 363 500 / F: +34 937 832 462
I+D+I DEVELOPMENT
CUSTOMIZED DESIGNS TO COVER PARTICULAR REQUIREMENTS OF SOME INDUSTRIES
MANIFOLD 100% PTFE – 2 VALVES MANIFOLD 100% PTFE – 3 VALVES MANIFOLD – 2 VALVES + 1 SAFETY VALVE
MANIFOLD – 3 VALVES FL. CONNECTION MANIFOLD – 2 VALVES MANIFOLD – 6 VALVES
MANIFOLD – 2 VALVES 10,000PSI DISTRIBUTORS 10,000 PSI NEEDLE VALVE – NPT
CUSTOMIZED DESIGNS TO COVER PARTICULAR REQUIREMENTS OF NUCLEAR INDUSTRIES
MANIFOLD – 5 VALVES (ASME III) 100% HASTELLOY PSV – CUSTOMIZED FOR NPP BRASS NEEDLE SW VALVE – PIPE END
BALL VALVES - WELD NIPPLES NEEDLE VALVE SST – SW 2 1/2" NEEDLE VALVE – WELD NIPPLES
INSTRUMENTATION NEEDLE VALVE – TxT (ASME III)
COMPANY PROFILE
6 MECESA
MECANICA EGARENSE S.A.
www.mecesa.com
HEAD OFFICE AND FACTORY
Joan Monpeó 35, 08223
Terrassa, Barcelona, Spain
P: +34 937 363 500 / F: +34 937 832 462
HEAD OFFICE AND FACTORY
Joan Monpeó 35, 08223
Terrassa, Barcelona, Spain
P: +34 937 363 500 / F: +34 937 832 462
AN INTERNATIONAL SUPPLIER OF INSTRUMENTATION COMPONENTS
The Mecesa products are operating in more than 1000 plants, Mecesa is involved as supplier on the erection of projects around the
world and thereafter in the maintenance of these with a high quality service based on a large stock of products tested and ready to
ship and installation.
PROJECTS AND CUSTOMERS
LOCATION & CONTACT
HEAD OFFICE AND FACTORY
Location: Barcelona area, Spain
Address: Joan Monpeó, 35, 08223 Terrassa
Facilities area: 2.700 m2
Permanent staff: 52 highly qualified workers
Offices in Spain: 10 (in industrial areas)
CONTACT
EXPORT DEPARTMENT: Mr. David Turmo [email protected] +34 607 385 876
Mr. Llorens Banús [email protected] +34 670 883 210
GENERAL: [email protected] +34 937 363 500