American Made Quality you can Depend On.
Mechanical Leak Before Press® on small diameter, within a 120 degree turn.
Deepest cup depth on the market.
Short turn elbows for space saving alternatives.
Radial orientation on installation is not necessary on the APOLLOXPRESS® line.
VISUAL and Mechanical Leak Before Press® feature on our large diameter fittings.
Patented stainless steel grab ring on large diameter 21/2” - 4”
Unique Floating flanges can be put back in place during installation.
Features of one piece welded construction tees include: - Custom Factory welded by certified welders. - Reduced weight. - Height reduction resulting in smaller envelope.
100% water tested weld or press.
BIM ready 3D CAD drawings available.
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
3
About APOLLOXPRESS® .................................................................................. 4-5
Ball Valves ..........................................................................................................7
Gate, Globe, Checks and Strainers ....................................................................15
Water Pressure Reducing Valves .......................................................................29
Backflow Prevention ........................................................................................33
Small and Large Diameter Fittings ...................................................................37
Installation Guide and Pressing Instructions System Description .....................................................................................50 Listings, Approvals & Codes .........................................................................50 General Installation Instructions .................................................................51 Minimum Spacing ......................................................................................52 Pressing Instructions ...................................................................................53 Jaw Pressing Instruction .............................................................................54 Ring, Sling, Chain Pressing Instruction .........................................................54 Jaw Compatibility .......................................................................................55 Cross Reference Chart ............................................................................ 56-64 Terms & Conditions .....................................................................................66 Warranty Information .................................................................................67
Table of Contents
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-60006
www.apollovalves.com
Contractor quality press ball valves in sizes ½” - 4” feature full port
design, forged brass or cast bronze bodies and numerous handle
and trim options. Standard construction for HVAC or certified Lead
Free for potable water, all feature press connections incorporating
Leak Before Press® technology.
Ball V
alves
Available in both Standardand Lead Free Models
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-60008
www.apollovalves.com
DIMENSIONS (IN)Part
Number Size A B C D E Wt (lbs.)
77V-103-01 1/2" 0.50 1.57 2.89 1.66 2.85 0.477V-104-01 3/4" 0.75 1.90 3.63 1.91 3.86 0.977V-105-01 1" 1.00 2.20 3.88 2.11 3.86 1.277V-106-01 1-1/4" 1.25 2.23 4.22 2.44 4.75 2.377V-107-01 1-1/2" 1.50 2.84 5.45 2.91 5.42 3.477V-108-01 2" 2.00 3.40 6.57 3.69 7.77 6.077V-109-01 2-1/2" 2.50 4.26 8.04 4.13 7.77 12.077V-100-01 3" 3.00 5.10 9.45 5.03 9.92 19.577V-10A-01 4" 4.00 5.20 10.35 5.70 14.78 26.0
DESCRIPTION:The APOLLOXPRESS® 77V Series two-piece press ball valve is ideal for installation in heating, cooling and non-potable plumbing. Features Leak Before Press® technology and 250 psig maximum working pressure. Proudly Made in the USA.
FEATURES:• Full-Port Flow• Superior RPTFE Seats and Packing• Adjustable Stem Packing• Ridgid® XL Press Tool Compatible (1/2” - 2”)• Ridgid® XLC Press Tool Compatible (2-1/2” - 4”)• Leak Before PressTM Technology• Blow-Out Proof Stem• Corrosion Resistant Materials• Silicone Free Assembly• 100% Factory Tested• Made in USA, ARRA Compliant
PERFORMANCE RATING: • Maximum Operating Pressure 250 psi• Temperature Range: 0°F - 250°F
APPROVALS: • MSS SP-110 Ball Valves• IAPMO IGC-157 Ball Valves• Directive 2011/65/CE (RoHS) Compliant
MATERIAL SPECIFICATIONS:Part Name MaterialBody Forged Brass, C37700Seat RPTFEBall Brass, ASTM B16, C36000 Chrome PlatedStem Packing RPTFENut Corrosion Resistant Plated SteelStem Forged Brass, C37700Retainer Forged Brass, C37700Handle Plated Steel / Insulated PolyvinylGland Brass, ASTM B16, C36000O-Ring Seals EPDM
OPTIONS(-01) Standard Lever Handle(-04) 2 1⁄4” Stem Extension(-07) Tee Handle(-11) Therma-SealTM Insulating Tee Handle (-27) Locking Handle77V140 Series – SS Ball & Stem
APPROVED APPLICATIONS: • Water, chilled and hot: 33° - 250°F• Hydronic Heating (90% glycol max)• Low Pressure Steam, 15 psi max• Not suitable for flammable gas service• Designed for direct mechanical connection to ASTM B88-Type K, L, and M copper tubing in the hard drawn condition.• Not compatible with soft annealed copper tubing.• Not intended for potable water
77V SERIESPress End Forged Ball Valve
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
9
DESCRIPTION:The Lead Free* APOLLOXPRESS® 77VLF Series press ball valve is ideal for installation in most plumbing and heating systems, including potable water. Features Leak Before Press® technology and 250 psig maximum working pressure.
FEATURES:• ANSI 3rd party Certified Lead-Free* • Full-Port Flow• Easily Identifiable Blue Lead Free Hang Tag & White Lever• Adjustable Stem Packing• Fast, Reliable, Economical Press Installation• Ridgid® XL Press Tool Compatible (1/2” - 2”)• Ridgid® XLC Press Tool Compatible (2-1/2” - 4”)• Leak Before Press® Technology• Blow-Out Proof Stem• Dezincification Resistant Materials• Silicone Free Assembly• 100% Factory Tested• Made in USA, ARRA Compliant
PERFORMANCE RATING: • Maximum Operating Pressure 250 psi • Temperature Range: 0°F - 250°F
APPROVALS: • MSS SP-110 Ball Valves• NSF/ANSI 61• NSF/ANSI 372 Certified Lead Free (0.25% Lead Max.)• IAPMO IGC-157 Ball Valves• Directive 2011/65/CE (RoHS) Compliant
MATERIAL SPECIFICATIONS:Part Name MaterialBody Lead Free Brass, C27451Seat RPTFE
Ball Lead Free Brass, C27451 (Plated)(4” – 316 Stainless Steel)
Stem Packing RPTFENut Corrosion Resistant Plated Steel
Stem Lead Free Brass, C27451(4” – 316 Stainless Steel)
Retainer Lead Free Brass, C27451 Handle Plated Steel / Insulated PolyvinylGland Brass, ASTM B16, C36000O-Ring Seals EPDM
DIMENSIONS (IN)LF Part
Number Size A B C D E Wt (lbs.)
77VLF-103-01 1/2" 0.50 1.57 2.89 1.66 2.85 0.477VLF-104-01 3/4" 0.75 1.90 3.63 1.91 3.86 0.977VLF-105-01 1" 1.00 2.20 3.88 2.11 3.86 1.277VLF-106-01 1-1/4" 1.25 2.23 4.22 2.44 4.75 2.377VLF-107-01 1-1/2" 1.50 2.84 5.45 2.91 5.42 3.477VLF-108-01 2" 2.00 3.40 6.57 3.69 7.77 6.077VLF-109-01 2-1/2" 2.50 4.26 8.04 4.13 7.77 12.077VLF-100-01 3" 3.00 5.10 9.45 5.03 9.92 19.577VLF-14A-01 4" 4.00 5.20 10.35 5.70 14.78 26.0
77VLF SERIESLead Free Press End Forged Ball Valve
* LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with US Federal Public Law 111-380 and Safe Drinking Water Act. ANSI 3rd party approved and listed.
OPTIONS(-01) Standard Lever Handle(-04) 2 1⁄4” Stem Extension(-07) Tee Handle(-11) Therma-SealTM Insulating Tee Handle (-27) Locking Handle77VLF140 Series – SS Ball & Stem
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600010
www.apollovalves.com
DESCRIPTION:The APOLLOXPRESS® 77W Series Ball valve is ideal for installation in heating, cooling and non-potable plumbing. Features Leak Before Press® technology and 250 psig maximum working pressure.
FEATURES:• Heavy pattern cast bronze body• Full-Port Flow• Adjustable Stem Packing• Fast, Reliable, Economical Press Installation• Ridgid® XL Press Tool Compatible• Leak Before Press® Technology• Blow-Out Proof Stem• Corrosion Resistant Materials• 100% Factory Tested• Silicone Free Assembly• Made in USA, ARRA Compliant
PERFORMANCE RATING: • Maximum Operating Pressure 250 psi• Temperature Range: 0°F - 250°F
APPROVALS: • MSS SP-110 Ball Valves• Directive 2011/65/CE (RoHS) Compliant
MATERIAL SPECIFICATIONS:Part Name MaterialBody Cast Bronze C89836Seat Multi-Fill PTFEBall ASTM B16 Brass, platedStem Packing Multi-Fill PTFENut Corrosion Resistant Plated SteelStem Brass, ASTM B16, UNS# C36000Retainer Brass, ASTM B16, UNS# C36000Handle Plated Steel/Insulated PolyvinylGland Brass, ASTM B16, UNS# C36000O-Ring Seals EPDM
DIMENSIONS (IN)Part
Number Size A B C D E Wt (lbs.)
77W-103-01 1/2” 0.50 1.54 3.08 1.50 3.74 0.677W-104-01 3/4” 0.75 1.78 3.55 2.01 4.78 1.177W-105-01 1” 1.00 1.93 3.86 2.20 4.78 1.877W-106-01 1-1/4” 1.25 2.44 4.87 3.13 7.04 4.377W-107-01 1-1/2” 1.50 2.91 5.81 3.10 7.04 4.677W-108-01 2” 2.00 3.74 7.47 3.48 7.04 8.2
OPTIONS(-04) 2 ¼” Stem Extension(-07) Tee-Handle(-10) Stainless Steel Handle and Nut(-11) Therma-Seal™ Insulating Tee Handle(-92) Standard Lever with Balancing Stop(-94) 2 ¼” Stem Extension and Balancing Stop(-HC) Press x ¾” Hose w./ Cap & Chain (1/2 & ¾”)(77W-140 Series) S.S. Ball and Stem(77WLF Series) Lead Free (0.25% Lead Max)
77W SERIESPress End Bronze Ball Valve
APPROVED APPLICATIONS: • Water, chilled and hot: 33° - 250°F• Hydronic Heating (90% glycol max)• Low Pressure Steam, 15 psi max• Not suitable for flammable gas service• Designed for direct mechanical connection to ASTM B88-Type K, L, and M copper tubing in the hard drawn condition.• Not compatible with soft annealed copper tubing.• Not intended for potable water
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
11
DESCRIPTION:The Lead Free* APOLLOXPRESS® 77WLF ball valve is ideal for installation in most plumbing and heating systems, including potable water systems requiring NSF 61 or Lead Free* approval. Features Leak Before Press® technology and 250 psig maximum working pressure.
FEATURES:• Lead Free* Brass & Bronze Materials • ANSI 3rd party Certified Lead-Free* • Easily Identifiable Blue Lead Free Hang Tag & White Lever• Full-Port Flow • Adjustable Stem Packing • Fast, Reliable, Economical Press Installation • Leak Before Press® Technology • Dezincification Resistant Materials • 100% Factory Tested • Ridgid® XL Press Tool Compatible • Made in USA, ARRA Compliant
PERFORMANCE RATING: • Maximum Operating Pressure 250 psi • Temperature Range: 0°F - 250°F
APPROVALS: • MSS SP-110 Ball Valves • NSF/ANSI 61-8 2010, Annex F & G Lead Free* • NSF/ANSI 372 Certified Lead Free (0.25% Lead Max.)
MATERIAL SPECIFICATIONS:Part Name MaterialBody ASTM B584 C89836 Seat Multi-Fill PTFE Ball C27451 Brass, Chr. Plated Stem Packing Multi-Fill PTFE Nut Zinc Plated Steel Stem C27451 Brass Retainer C27451 Brass Handle Plated Steel / Insulated Polyvinyl Gland Brass, ASTM B16, C36000 O-Ring EPDM
DIMENSIONS (IN)LF Part
Number Size A B C D E Wt (lbs.)
77WLF-103-01 1/2” 0.50 1.54 3.08 1.50 3.74 0.61 77WLF-104-01 3/4” 0.75 1.78 3.55 2.01 4.78 1.09 77WLF-105-01 1” 1.00 1.93 3.86 2.20 4.78 1.77 77WLF-106-01 1-1/4” 1.25 2.44 4.87 3.13 7.04 4.27 77WLF-107-01 1-1/2” 1.50 2.91 5.81 3.10 7.04 4.63 77WLF-108-01 2” 2.00 3.74 7.47 3.48 7.04 8.21
OPTIONS(-04) 2 ¼” Stem Extension (-07) Tee-Handle (-10) Stainless Steel Handle and Nut (-11) Therma-Seal™ Insulating Tee Handle (-92) Standard Lever with Balancing Stop (-94) 2 ¼” Stem Extension and Balancing Stop (77WLF-140 SERIES) S.S. Ball and Stem
77WLF SERIESLead Free Press End Bronze Ball Valve
* LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with US Federal Public Law 111-380 and Safe Drinking Water Act. ANSI 3rd party approved and listed.
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600012
www.apollovalves.com
DESCRIPTION:The APOLLOXPRESS® 77W-HC Press x Hose bronze ball valve is ideal for installation in heating, cooling and non-potable plumbing. Features a ¾” hose thread connection with heavy brass cap to protect the threads. Features Leak Before Press® technology and 250 psig maximum working pressure.
FEATURES:• Full-Port • Ridgid® “XL” Press Tool Compatible • Adjustable Stem Packing • Fast, Reliable, Economical Press Installation • Leak Before Press® Technology • Dezincification Resistant Bronze Body • Heavy duty brass cap is full pressure rated • 100% Factory Tested • Made in USA, ARRA Compliant
PERFORMANCE RATING: • Maximum Operating Pressure 250 psi • Maximum Temperature 250°F
APPROVALS: • MSS SP-110 Ball Valves • Directive 2011/65/CE (RoHS) Compliant
MATERIAL SPECIFICATIONS:Part Name MaterialBody ASTM B584 C89836 Bronze Seat Multi-Fill PTFE Ball ASTM B16 Brass, plated Stem Packing Multi-Fill PTFE Nut Corrosion Resistant Plated Steel Stem Brass, ASTM B16, UNS# C36000 Retainer Brass, ASTM B16, UNS# C36000 Cap Brass, ASTM B16, UNS# C36000 Handle Plated Steel/Insulated Polyvinyl Gland Brass, ASTM B16, UNS# C36000 O-Ring Seals EPDM
DIMENSIONS (IN)Part
Number Size A B C D E F Wt (lbs.)
77W-103-HC 1/2” 0.50 1.54 3.12 1.80 3.74 1.54 0.6177W-104-HC 3/4” 0.75 1.72 3.45 2.01 4.78 1.78 1.16
77W-HC SERIESBall Valve w/Press X Hose Connection
OPTIONS(-04) 2 ¼” Stem Extension (-07) Tee-Handle (-10) Stainless Steel Handle and Nut (-11) Therma-Seal™ Insulating Tee Handle (-92) Balancing Stop (-94) 2 ¼” Stem Extension and Balancing Stop (77WLF-140-HC SERIES) S.S. Ball and Stem (77WLF-HC SERIES) Lead Free 0.25% Lead Max
APPROVED APPLICATIONS: • Water, chilled and hot: 33° - 250°F• Hydronic Heating (90% glycol max)• Not suitable for flammable gas service• Designed for direct mechanical connection to ASTM B88-Type K, L, and M copper tubing in the hard drawn condition.• Not compatible with soft annealed copper tubing.• Not intended for potable water
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
13
DESCRIPTION:The APOLLOXPRESS® Lead Free* Press x Hose Cap & Chain bronze ball valves feature a ¾” hose connection with heavy brass cap to protect the threads. The 77WLF-HC is ideal for most plumbing and heating systems, including potable water. Features Leak Before Press® technology and 250 psig maximum working pressure.
FEATURES:• Full-Port• ANSI 3rd party Certified Lead-Free* • Adjustable Stem Packing • Easily Identifiable Blue Lead Free Hang Tag & White Lever• Fast, Reliable, Economical Press Installation • Leak Before Press® Technology • Dezincification Resistant Lead Free* Brass & Bronze Materials • Heavy brass cap is full pressure rated • Easily Identifiable Blue “Lead Free” Hang Tag • Ridgid® “XL” Press Tool Compatible • Made in USA, ARRA Compliant
PERFORMANCE RATING: • Maximum Operating Pressure 250 psi • Temperature Range 0°F - 250°F
APPROVALS: • MSS SP-110 Ball Valves • NSF/ANSI 61-8 • NSF/ANSI 372 Certified Lead Free (0.25% Lead Max.)
MATERIAL SPECIFICATIONS:Part Name MaterialBody C89836 Lead Free* Bronze Seat Multi-Fill PTFE Ball C27451 Lead Free* Brass Cr. Plated Stem Packing Multi-Fill PTFE Nut Corrosion Resistant Plated Steel Stem C27451 Lead Free* Brass Retainer C27451 Lead Free* Brass Cap C27451 Lead Free* Brass Handle Plated Steel/Insulated Polyvinyl Gland Brass, ASTM B16, UNS# C36000 O-Ring EPDM
DIMENSIONS (IN)LF Part
Number Size A B C D E F Wt (lbs.)
77WLF-103-HC 1/2” 0.50 1.54 3.12 1.80 3.74 1.54 0.61 77WLF-104-HC 3/4” 0.75 1.72 3.45 2.01 4.78 1.78 1.16
77WLF-HC SERIESLead Free Ball Valve w/Press X Hose Connection
OPTIONS(-04) 2 ¼” Stem Extension (-07) Tee-Handle (-10) Stainless Steel Handle and Nut (-11) Therma-Seal™ Insulating Tee Handle (-92) Balancing Stop (-94) 2 ¼” Stem Extension and Balancing Stop (77WLF-14x-HC Series) S.S. Ball and Stem
APPROVED APPLICATIONS: • Water, including Potable Water • Hydronic Heating (90% glycol max) • Not compatible with soft annealed copper tubing
* LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with US Federal Public Law 111-380 and Safe Drinking Water Act. ANSI 3rd party approved and listed.
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600014
www.apollovalves.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
15
Cast bronze 200 CWP gate, globe, and swing check valves, in press
sizes ½” to 2”, feature materials and workmanship that conform to
MSS-SP80. Rising and non-rising stem models feature solid bronze
wedge disc gates, and bronze or PTFE seated globes and checks.
Also available are bronze wye strainers and in-line check valves
with RPTFE Ball Cone® seating. Press connections incorporate Leak
Before Press® technology. 100% factory tested.
Gate,
Glob
e, Ch
ecks
& Str
ainers
Available in both Standardand Lead Free Models
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600016
www.apollovalves.com
DESCRIPTION:The APOLLOXPRESS® Model 101T-PR (30 Series) Gate valve with Press connections is a proven combination that provides economical installation and reliable service. The valves are cast, machined, assembled, and tested in South Carolina using proven ASTM quality materials. The Apollo rising stem Gate valve can reliably be installed in most heating, cooling and non-potable plumbing systems including building service piping and OEM applications.
FEATURES:• Fast, Reliable, Economical Press Installation • Ridgid® XL Press Tool Compatible • Leak Before Press® Technology • Full Port Flow • Guided Solid Bronze Disc • Adjustable Graphite Stem Packing • Rising Stem • Screw-in Bonnet • Rugged Coated Malleable Iron Hand Wheel • Back seat protection • Made in USA, ARRA Compliant
PERFORMANCE RATING†: • Maximum Pressure: 200 psi (13.8 bar) non-shock • Temperature Range: 0°F - 250ºF (-18°C - 121°C) • Low Pressure Steam - Max. working pressure: 15 psi
† APOLLOXPRESS® connectors are designed for direct mechanical connection to ASTM B88-Type K, L, and M copper tubing in the hard drawn condition. Press connectors are not suitable for flammable gas service.
STANDARDS • MSS SP-80, “Bronze Gate, Globe, Angle & Check Valves”, • Canadian Registration Number 0C14667.5
MATERIAL SPECIFICATIONS:Part Name MaterialBody ASTM B62 –C83600 Bronze Bonnet ASTM B62 –C83600 Bronze Connector Housing ASTM B16 –C36000 Brass Connector O-Ring NSF grade EPDM Stem ASTM B371 C69400 Bronze Disc ASTM B62 –C83600 Bronze Packing Grafoil Hand Wheel Malleable Iron Nameplate Aluminum
DIMENSIONS (IN)
Pipe SizeDimensions (in.)
Wt (lbs) Cv (gpm)Height (open) Length
1/2” 4.85 3.9 1.3 12.5 3/4” 5.71 4.3 1.8 24.0
1” 6.71 4.7 2.6 72.3 1-1/4” 8.1 5.13 3.8 80.0 1-1/2” 9.08 6.12 5.4 119.0
2” 11.28 6.70 8.5 338.0 For liquids, the flow coefficient - Cv - expresses the flow capacity in gallons per minute (GPM) of 60°F water with a pressure drop of 1 psi (lb/in2).
101T-PR200 CWP Bronze RS Gate Valve
ORDERING INFORMATION
Size ModelNumber
PartNumber
1/2” 101T12-PR 30-003-01PR 3/4” 101T34-PR 30-004-01PR
1” 101T1-PR 30-005-01PR 1-1/4” 101T114-PR 30-006-01PR 1-1/2” 101T112-PR 30-007-01PR
2” 101T2-PR 30-008-01PR
Not intended for potable water
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
17
DESCRIPTION:The Lead Free* APOLLOXPRESS® Model 101T-PRLF (30LF Series) Gate valve with press connectors is a proven combination that provides economical installation and reliable service for plumbing and heating applications including potable water. These valves are cast, machined, assembled, and tested in South Carolina using proven ASTM quality materials.
FEATURES:• ANSI 3rd party Certified Lead-Free* • Fast, Reliable, Economical Press Installation • Ridgid® XL Press Tool Compatible • Leak Before Press® Technology • Full Port Flow • Guided Solid Lead Free* Bronze Disc • Adjustable Graphite Stem Packing • Rising Stem • Screw-in Bonnet • Rugged Coated Malleable Iron Hand Wheel • Back seat protection • Made in USA, ARRA Compliant
STANDARDS• MSS SP-139, “Copper Alloy Gate, Globe, & Check Valves” • ANSI/NSF 61-8 2010 • NSF/ANSI 372 Certified Lead Free (0.25% Lead Max.)• Canadian Registration Number 0C14667.5
PERFORMANCE RATING†: • Maximum Pressure: 200 psi (13.8 bar) non-shock • Temperature Range: 0°F - 250ºF (-18°C - 121°C) • Low Pressure Steam - Max. working pressure: 15 psi
† APOLLOXPRESS® connectors are designed for direct mechanical connection to ASTM B88-Type K, L, and M copper tubing in the hard drawn condition. Press connectors are not suitable for flammable gas service.
MATERIAL SPECIFICATIONS:Part Name MaterialBody ASTM B584-C89836 Bronze Bonnet ASTM B584-C89836 Bronze Connector Housing C27451 Brass Connector O-Ring NSF grade EPDM Stem ASTM B371 C69400 Bronze Disc ASTM B584-C89836 Bronze Packing Grafoil Hand Wheel Malleable Iron Nameplate Aluminum
101T-PRLFLead Free 200 CWP Bronze RS Gate Valve
* LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with US Federal Public Law 111-380 and Safe Drinking Water Act. ANSI 3rd party approved and listed.
ORDERING INFORMATION
Size ModelNumber
LF PartNumber
1/2” 101T12-PRLF 30LF-003-01PR 3/4” 101T34-PRLF 30LF-004-01PR
1” 101T1-PRLF 30LF-005-01PR 1-1/4” 101T114-PRLF 30LF-006-01PR 1-1/2” 101T112-PRLF 30LF-007-01PR
2” 101T2-PRLF 30LF-008-01PR
DIMENSIONS (IN)
Pipe SizeDimensions (in.)
Wt (lbs) Cv (gpm)Height (open) Length
1/2” 4.85 3.9 1.3 12.5 3/4” 5.71 4.3 1.8 24.0
1” 6.71 4.7 2.6 72.3 1-1/4” 8.1 5.13 3.8 80.0 1-1/2” 9.08 6.12 5.4 119.0
2” 11.28 6.70 8.5 338.0 For liquids, the flow coefficient - Cv - expresses the flow capacity in gallons per minute (GPM) of 60°F water with a pressure drop of 1 psi (lb/in2).
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600018
www.apollovalves.com
DESCRIPTION:The APOLLOXPRESS® Model 102T-PR (30 Series) Gate valve with press connections is a proven combination that provides economical installation and reliable service. The valves are cast, machined, assembled, and tested in South Carolina with proven ASTM quality material. The Apollo Gate valve can reliably be installed in most heating, cooling and non-potable plumbing systems including building service piping and OEM applications.
FEATURES:• Fast, Reliable, Economical Press Installation • Ridgid® XL Press Tool Compatible • Leak Before Press® Technology • Guided Solid Bronze Disc • Adjustable Graphite Stem Packing • Non-Rising Stem • Dezincification Resistant • All Bronze Body, Disc and Bonnet • 100% Factory tested per MSS standard • Screw-in Bonnet • Rugged Malleable Iron Hand Wheel • Back seat protection • Made in USA, ARRA Compliant
STANDARDS • MSS SP-80, “Bronze Gate, Globe, Angle & Check Valves” • Canadian Registration Number 0C14667.5
PERFORMANCE RATING†: • Maximum Pressure: 200 psi (13.8 bar) non-shock • Temperature Range: 0°F - 250ºF (-18°C - 121°C)• Low Pressure Steam - Max. working pressure: 15 psi
† APOLLOXPRESS® connectors are designed for direct mechanical connection to ASTM B88-Type K, L, and M copper tubing in the hard drawn condition. Press connectors are not suitable for flammable gas service.
MATERIAL SPECIFICATIONS:Part Name MaterialBody ASTM B62 –C83600 Bronze Bonnet ASTM B62 –C83600 Bronze Stem ASTM B371 Bronze Disc ASTM B62 –C83600 Bronze Connector Housing ASTM B16 –C36000 Brass Connector O-Ring NSF grade EPDM Packing Grafoil® Packing Nut ASTM B16 Brass Hand Wheel Malleable Iron Nameplate Aluminum
102T-PR200 CWP Bronze NRS Gate Valve
DIMENSIONS (IN)
Pipe SizeDimensions (in.)
Wt (lbs) Cv (gpm)Height (open) Length
1/2” 4.85 3.9 1.3 12.5 3/4” 5.71 4.3 1.8 24.0
1” 6.71 4.7 2.6 72.3 1-1/4” 8.1 5.13 3.8 80.0 1-1/2” 9.08 6.12 5.4 119.0
2” 11.28 6.70 8.5 338.0
ORDERING INFORMATION
Size ModelNumber
PartNumber
1/2” 102T12-PR 30-033-01PR 3/4” 102T34-PR 30-034-01PR
1” 102T1-PR 30-035-01PR 1-1/4” 102T114-PR 30-036-01PR 1-1/2” 102T112-PR 30-037-01PR
2” 102T2-PR 30-038-01PR
Valves should be in the open position to allow complete drainage during freezing conditions.
Not intended for potable water
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
19
DESCRIPTION:The Lead Free* APOLLOXPRESS® Model 102T-PRLF (30LF Series) Bronze Gate valve with Press connectors is a proven combination that provides economical installation and reliable service for plumbing and heating applications including potable water. These valves are cast, machined, assembled, and tested in South Carolina using proven ASTM quality materials.
FEATURES:• Fast, Easy, Economical Press Installation • ANSI 3rd party Certified Lead-Free* • Ridgid® XL Press Tool Compatible • Leak Before Press® Technology • Full Port • Guided Solid Bronze Disc • Adjustable Graphite Stem Packing • Non-Rising Stem • 100% Factory tested per MSS • Screw-in Bonnet • Rugged Coated Malleable Iron Hand Wheel • Back seat protection • Made in USA, ARRA Compliant
STANDARDS • MSS SP-139, “Copper Alloy Bronze Gate, Globe, Angle & Check Valves” • NSF/ANSI 61-8 • NSF/ANSI 372 Certified Lead Free (0.25% Lead Max.)
PERFORMANCE RATING†: • Maximum Pressure: 200 psi (13.8 bar) non-shock • Temperature Range: 0°F - 250ºF (-18°C - 121°C) • Low Pressure Steam - Max. working pressure: 15 psi
† APOLLOXPRESS® connectors are designed for direct mechanical connection to ASTM B88-Type K, L, and M copper tubing in the hard drawn condition. Press connectors are not suitable for flammable gas service.
MATERIAL SPECIFICATIONS:Part Name MaterialBody ASTM B584-C89836 Bronze Bonnet ASTM B584-C89836 Bronze Stem ASTM B371 Bronze Disc ASTM B584-C89836 Bronze Packing Grafoil® Packing Nut ASTM B16 Brass Hand Wheel Malleable Iron Nameplate Aluminum
102T-PRLFLead Free 200 CWP Bronze NRS Gate Valve
* LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with US Federal Public Law 111-380 and Safe Drinking Water Act. ANSI 3rd party approved and listed.
DIMENSIONS (IN)
Pipe SizeDimensions (in.)
Wt (lbs) Cv (gpm)Height (open) Length
1/2” 4.85 3.9 1.3 12.5 3/4” 5.71 4.3 1.8 24.0
1” 6.71 4.7 2.6 72.3 1-1/4” 8.1 5.13 3.8 80.0 1-1/2” 9.08 6.12 5.4 119.0
2” 11.28 6.70 8.5 338.0 ** Cv = flowrate at 1.0 psid.
ORDERING INFORMATION
Size ModelNumber
LF PartNumber
1/2” 102T12-PRLF 30LF-033-01PR 3/4” 102T34-PRLF 30LF-034-01PR
1” 102T1-PRLF 30LF-035-01PR 1-1/4” 102T114-PRLF 30LF-036-01PR 1-1/2” 102T112-PRLF 30LF-037-01PR
2” 102T2-PRLF 30LF-038-01PR
Valves should be in the open position to allow complete drainage during freezing conditions.
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600020
www.apollovalves.com
DESCRIPTION:The APOLLOXPRESS® Model 120T-PR (33 Series) Globe valve with press connections is a proven combination that provides economical installation and reliable service. The valves are cast, machined, assembled, and tested in South Carolina with proven ASTM quality material. The Apollo Globe valve can reliably be installed in most heating, cooling and non-potable plumbing systems including building service piping and OEM applications
FEATURES:• Fast, Reliable, Economical Press Installation • Ridgid® XL Press Tool Compatible • Leak Before Press® Technology • Optimum Flow Capacity • PTFE Soft Seat • Adjustable Graphite Stem Packing • Dezincification Resistant • 100% Factory tested per MSS standard • Screw-in Bonnet • Rugged Coated Malleable Iron Hand Wheel • Back seat protection • Made in USA, ARRA Compliant
STANDARDS • MSS SP-80, “Bronze Gate, Globe, Angle & Check Valves”, • Canadian Registration Number 0C14667.5
PERFORMANCE RATING†: • Maximum Pressure: 200 psi (13.8 bar) non-shock • Temperature Range: 0°F - 250ºF (-18°C - 121°C) • Low Pressure Steam - Max. working pressure: 15 psi
† APOLLOXPRESS® connectors are designed for direct mechanical connection to ASTM B88-Type K, L, and M copper tubing in the hard drawn condition. Press connectors are not suitable for flammable gas service.
MATERIAL SPECIFICATIONS:Part Name MaterialBody ASTM B62 Bronze Bonnet ASTM B62 Bronze Stem ASTM B371 Bronze Disc PTFE Packing Grafoil® Hand Wheel Malleable Iron Nameplate Aluminum Connector Housing ASTM B16 Brass Connector O-Ring NSF grade EPDM
120T-PR200 CWP Bronze Globe Valve
DIMENSIONS (IN)
Pipe SizeDimensions (in.)
Wt (lbs) Cv (gpm)Height (open) Length (in.)
1/2” 3.47 4.5 1.1 4.4 3/4” 4.75 5.9 1.9 7.4
1” 5.40 7.0 3.0 12.1 1-1/4” 7.80 8.5 7.8 29.0 1-1/2” 7.80 9.2 7.8 30.0
2” 8.43 10.8 11.3 49.0
ORDERING INFORMATION
Size ModelNumber
Part Number
1/2” 120T12-PR 33-133-01PR 3/4” 120T34-PR 33-134-01PR
1” 120T1-PR 33-135-01PR 1-1/4” 120T114-PR 33-136-01PR 1-1/2” 120T112-PR 33-137-01PR
2” 120T2-PR 33-138-01PR
Valves should be in the open position to allow complete drainage during freezing conditions.
Not intended for potable water
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
21
DESCRIPTION:The Lead Free* APOLLOXPRESS® Model 120T-PRLF (33LF Series) Globe valve with press connections is a proven combination that provides economical installation and reliable service for plumbing and heating applications including potable water. These valves are cast, machined, assembled, and tested in South Carolina using proven ASTM quality materials.
FEATURES:• ANSI 3rd party Certified Lead-Free* • Fast, Reliable, Economical Press Installation • Ridgid® XL Press Tool Compatible • Leak Before Press® Technology • Optimum Flow Capacity • PTFE Soft Seat • Adjustable Graphite Stem Packing • Dezincification Resistant • 100% Factory tested per MSS standards • Screw-in Bonnet • Rugged Malleable Iron Hand Wheel • Back seat protection • Made in USA, ARRA Compliant
STANDARDS • MSS SP-139, “Copper Alloy Gate, Globe, & Check Valves” • NSF/ANSI 61-8 2010• NSF/ANSI 372 Certified Lead Free (0.25% Lead Max.)• Canadian Registration Number 0C14667.5
PERFORMANCE RATING†: • Maximum Pressure: 200 psi (13.8 bar) non-shock • Temperature Range: 0°F - 250ºF (-18°C - 121°C) • Low Pressure Steam - Max. working pressure: 15 psi
† APOLLOXPRESS® connectors are designed for direct mechanical connection to ASTM B88-Type K, L, and M copper tubing in the hard drawn condition. Press connectors are not suitable for flammable gas service. MATERIAL SPECIFICATIONS:Part Name MaterialBody ASTM B584 C89836 Bronze Bonnet ASTM B584 C89836 Bronze Stem ASTM B371 C69400 Bronze Connector Housing C27451 Brass Connector O-Ring NSF grade EPDM Disc PTFE Packing Grafoil® Hand Wheel Malleable Iron Nameplate Aluminum
120T-PRLFLead Free 200 CWP Bronze Globe Valve
* LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with US Federal Public Law 111-380 and Safe Drinking Water Act. ANSI 3rd party approved and listed.
DIMENSIONS (IN)
Pipe SizeDimensions (in.)
Wt (lbs) Cv (gpm)Height (open) Length (in.)
1/2” 3.47 2.70 1.1 4.4 3/4” 4.75 3.20 1.9 7.4
1” 5.40 3.75 3.0 12.1 1-1/4” 7.78 4.74 7.3 29.0 1-1/2” 7.78 4.74 7.0 30.0
2” 8.43 5.72 10.7 49.0
ORDERING INFORMATION
Size ModelNumber
LF Part Number
1/2” 120T12-PRLF 33LF-133-01PR 3/4” 120T34-PRLF 33LF-134-01PR
1” 120T1-PRLF 33LF-135-01PR 1-1/4” 120T114-PRLF 33LF-136-01PR 1-1/2” 120T112-PRLF 33LF-137-01PR
2” 120T2-PRLF 33LF-138-01PR
Valves should be in the open position to allow complete drainage during freezing conditions.
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600022
www.apollovalves.com
DESCRIPTION:The APOLLOXPRESS® Model 163T-PR (61Y Series) Swing Check valve with press connectors is a proven combination that provides economical installation and reliable service in most heating, cooling and non-potable plumbing systems. These valves are cast, machined, assembled, and tested in South Carolina using proven ASTM quality materials.
FEATURES:• Fast, Reliable, Economical Press Installation • Ridgid® XL Press Tool Compatible • Leak Before Press® Technology • Renewable PTFE Seat Disc • Dezincification Resistant • Factory tested per MSS SP-80 • Made in USA, ARRA Compliant
STANDARDS • MSS SP-80, “Bronze Gate, Globe & Check Valves” • Canadian Registration Number 0C14667.5
PERFORMANCE RATING†: • Maximum Pressure: 200 psi (13.8 bar) non-shock • Temperature Range: 0°F - 250ºF (-18°C - 121°C) • Low Pressure Steam - Max. working pressure: 15 psi
† APOLLOXPRESS® connectors are designed for direct mechanical connection to ASTM B88-Type K, L, and M copper tubing in the hard drawn condition. Press connectors are not suitable for flammable gas service.
MATERIAL SPECIFICATIONS:Part Name MaterialBody ASTM B62 Bronze Cap ASTM B62 Bronze Connector Housing ASTM B16 Brass Connector O-Ring FDA grade EPDM
Hanger304 Stainless Steel or ASTM B62 Bronze
Pin Stainless Steel Seat PTFE Plug ASTM B16 Brass
163T-PR200 CWP Bronze Swing Check
DIMENSIONS (IN)
Pipe SizeDimensions (in.)
Wt (lbs) Cv (gpm)Height (in.) Length (in.)
1/2” 1.65 4.3 .78 7.0 3/4” 1.9 5.1 1.8 12.0
1” 2.26 5.9 2.5 28.6 1-1/4” 2.99 7.0 4.4 39.0 1-1/2” 2.99 7.75 4.5 56.0
2” 3.74 8.9 7.0 152.0 For liquids, the flow coefficient - Cv - expresses the flow capacity in gallons per minute (GPM) of 60°F water with a pressure drop of 1 psi (lb/in2).
ORDERING INFORMATION
Size ModelNumber
PartNumber
1/2” 163T12-PR 61Y-203-T1PR 3/4” 163T34-PR 61Y-204-T1PR
1” 163T1-PR 61Y-205-T1PR 1-1/4” 163T114-PR 61Y-206-T1PR 1-1/2” 163T112-PR 61Y-207-T1PR
2” 163T2-PR 61Y-208-T1PR
Precautionary Note: Not recommended for use with reciprocating pumps and similar applications, which may induce repetitious vibrations. Low flow rates which do not fully open the valve may result in undesirable noise and premature valve failure. Upstream flow disturbances, which create turbulence, may also result in rapid wear. Therefore, it is recommended that a minimum of 10 diameters of straight pipe be provided between the check valve and any upstream flow disturbances such as pumps, control valves, elbows, etc. See Installation Manual for details.
Not intended for potable water
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
23
DESCRIPTION:The Lead Free* APOLLOXPRESS® Model 163T-PRLF (Series 61YLF) Swing Check with press connections is a proven combination that provides economical installation and reliable service for plumbing and heating applications including potable water. These valves are cast, machined, assembled, and tested in South Carolina using proven ASTM quality materials.
FEATURES:• Fast, Reliable, Economical Press Installation • ANSI 3rd party Certified Lead-Free* • Ridgid® XL Press Tool Compatible • Leak Before Press® Technology • Quick Press End Connection • Renewable PTFE Seat Disc • Dezincification Resistant Materials• Made in USA, ARRA Compliant
STANDARDS • MSS SP-139, “Copper Alloy Gate, Globe, & Check Valves” • NSF/ANSI 61-8 • NSF/ANSI 372 Certified Lead Free (0.25% Lead Max.)• Canadian Registration Number 0C14667.5
PERFORMANCE RATING†: • Maximum Pressure: 200 psi (13.8 bar) non-shock • Temperature Range: 0°F - 250ºF (-18°C - 121°C) • Low Pressure Steam - Max. working pressure: 15 psi
† APOLLOXPRESS® connectors are designed for direct mechanical connection to ASTM B88-Type K, L, and M copper tubing in the hard drawn condition. Press connectors are not suitable for flammable gas service. MATERIAL SPECIFICATIONS:Part Name MaterialBody ASTM B584 C89836 Bronze Cap ASTM B584 C89836 Bronze Connector Housing C27451 Brass Connector O-Ring NSF grade EPDM
Hanger304 Stainless Steel or ASTM B584 C89836 Bronze
Pin Stainless Steel Seat PTFE Plug C27451 Brass
163T-PRLFLead Free 200 CWP Bronze Swing Check
Precautionary Note: Not recommended for use with reciprocating pumps and similar applications, which may induce repetitious vibrations. Low flow rates which do not fully open the valve may result in undesirable noise and premature valve failure. Upstream flow disturbances, which create turbulence, may also result in rapid wear. Therefore, it is recommended that a minimum of 10 diameters of straight pipe be provided between the check valve and any upstream flow disturbances such as pumps, control valves, elbows, etc. See Installation Manual for details.
* LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with US Federal Public Law 111-380 and Safe Drinking Water Act. ANSI 3rd party approved and listed.
DIMENSIONS (IN)
Pipe SizeDimensions (in.)
Wt (lbs) Cv (gpm)Height (in.) Length (in.)
1/2” 1.65 4.3 .78 7.0 3/4” 1.9 5.1 1.8 12.0
1” 2.26 5.9 2.5 28.6 1-1/4” 2.99 7.0 4.4 39.0 1-1/2” 2.99 7.75 4.5 56.0
2” 3.74 8.9 7.0 152.0 For liquids, the flow coefficient - Cv - expresses the flow capacity in gallons per minute (GPM) of 60°F water with a pressure drop of 1 psi (lb/in2).
ORDERING INFORMATION
Size ModelNumber
LF PartNumber
1/2” 163T12-PRLF 61YLF-203-T1PR 3/4” 163T34-PRLF 61YLF-204-T1PR
1” 163T1-PRLF 61YLF-205-T1PR 1-1/4” 163T114-PRLF 61YLF-206-T1PR 1-1/2” 163T112-PRLF 61YLF-207-T1PR
2” 163T2-PRLF 61YLF-208-T1PR
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600024
www.apollovalves.com
DESCRIPTION:The APOLLOXPRESS® Model CVB-PR (61 Series) BALL-CONE® check valves with Press connections offer reliable service in most heating, cooling and non-potable plumbing systems. These valves are cast, machined, assembled, and tested in South Carolina using proven ASTM quality materials. May be installed in both horizontal and vertical flow with upward flow.
FEATURES:• Fast, Reliable, Economical Press Installation • Ridgid® XL Press Tool Compatible • Leak Before Press® Technology • 1/2 psi spring cracking pressure is standard • Tight Shut-off With Liquid Media • Straight-through Flow Design Efficiency • RPTFE Ball-Cone® for Chemical Resistance • Made in USA, ARRA Compliant
PERFORMANCE RATING†: • Maximum Pressure: 250 psi (17.2 bar) non-shock • Temperature Range: 0°F - 250ºF (-18°C - 121°C) • Low Pressure Steam - Max. working pressure: 15 psi
† APOLLOXPRESS® connectors are designed for direct mechanical connection to ASTM B88-Type K, L, and M copper tubing in the hard drawn condition. Press connectors are not suitable for flammable gas service.
APPROVALS • Canadian Registration Number 0C11218.5C
MATERIAL SPECIFICATIONS:Part Name MaterialBody ASTM B584 Bronze C84400 Retainer ASTM B16 Brass Spring AISI 316 Stainless Steel Connector Housing ASTM B16 Brass Connector Retainer 316 Stainless Steel Ball Cone Check RPTFE, 15% Glass Filled Stem ASTM B16 Brass
61 SERIESIn-Line Bronze Check Valve
DIMENSIONS (IN)Model
NumberPart
Number Size Length Wt (lbs) Flow (Cv)
CVB12-PR 61-103-01PR 1/2” 4.2” .42 1.4 CVB34-PR 61-104-01PR 3/4” 5.0” 1.0 3.5 CVB1-PR 61-105-01PR 1” 5.8” 1.9 6.0
CVB114-PR 61-106-01PR 1-1/4” 6.7” 3.35 44 CVB112-PR 61-107-01PR 1-1/2” 8.2” 4.6 65
CVB2-PR 61-108-01PR 2” 9.7” 7.3 81 For liquids, the flow coefficient - Cv - expresses the flow capacity in gallons per minute (GPM) of 60°F water with a pressure drop of 1 psi (lb/in2).
Precautionary Note: Not recommended for use with reciprocating pumps and similar applications, which may induce repetitious vibrations. Low flow rates which do not fully open the valve may result in undesirable noise and premature valve failure. Upstream flow disturbances, which create turbulence, may also result in rapid wear. Therefore, it is recommended that a minimum of 10 diameters of straight pipe be provided between the check valve and any upstream flow disturbances such as pumps, control valves, elbows, etc. See Installation Manual for details.
OPTIONS** Soft Seat (61-500 Series) 0 psig Cracking Pressure (No Spring) 5 psig Cracking Pressure (1/2” - 1”)10 psig Cracking Pressure (1/2” - 1”)Lead Free 0.25% Lead Max.(61LF-PR Series) OTHER
Not intended for potable water
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
25
DESCRIPTION:The Lead Free* APOLLOXPRESS® Model CVB- PRLF (61LF Series) BALL-CONE® check valves with Press connections offer reliable protection against reverse flow in plumbing and heating applications including potable water. These valves are cast, machined, assembled, and tested in South Carolina using proven ASTM quality materials. Valves may be installed in both horizontal and vertical flow with upward flow.
FEATURES:• Fast, Reliable, Economical Press Installation • ANSI 3rd party Certified Lead-Free* • Ridgid® XL Press Tool Compatible • Leak Before Press® Technology • 1/2 psi spring cracking pressure • Tight Shut-off With Liquid Media • Straight-through Flow Design Efficiency • RPTFE Ball-Cone® for Chemical Resistance • Made in USA, ARRA Compliant
APPROVALS • NSF/ANSI 61-8• Canadian Registration Number 0C11218.5C • NSF/ANSI 372 Certified Lead Free (0.25% Lead Max.)
PERFORMANCE RATING†: • Maximum Pressure: 250 psi (17.2 bar) non-shock • Temperature Range: 0°F - 250ºF (-18°C - 121°C) • Low Pressure Steam - Max. working pressure: 15 psi
† APOLLOXPRESS® connectors are designed for direct mechanical connection to ASTM B88-Type K, L, and M copper tubing in the hard drawn condition. Not suitable for flammable gas service.
MATERIAL SPECIFICATIONS:Part Name MaterialBody ASTM B584 C89836 Lead Free* Bronze Retainer C27451 Lead Free* Brass Connector Housing C27451 Lead Free* Brass Connector O-Ring NSF grade EPDM Spring AISI 316 Stainless Steel Ball Cone Check RPTFE, 15% Glass Filled Stem C27451 Lead Free* Brass
61LF SERIESLead Free Bronze In-Line Check Valve
* LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with US Federal Public Law 111-380 and Safe Drinking Water Act. ANSI 3rd party approved and listed.
DIMENSIONS (IN)Model
NumberLF Part
Number Size Length Wt (lbs) Flow (Cv)
CVB12-PRLF 61LF-103-01PR 1/2” 4.2” .42 1.4 CVB34-PRLF 61LF-104-01PR 3/4” 5.0” 1.0 3.5 CVB1-PRLF 61LF-105-01PR 1” 5.8” 1.9 6.0
CVB114-PRLF 61LF-106-01PR 1-1/4” 6.7” 3.35 44 CVB112-PRLF 61LF-107-01PR 1-1/2” 8.2” 4.6 65
CVB2-PRLF 61LF-108-01PR 2” 9.7” 7.3 81For liquids, the flow coefficient - Cv - expresses the flow capacity in gallons per minute (GPM) of 60°F water with a pressure drop of 1 psi (lb/in2).
OPTIONS** Soft Seat (61LF-500 Series) 0 psig Cracking Pressure (No Spring) 5 psig Cracking Pressure (1/2” - 1”)10 psig Cracking Pressure (1/2” - 1”)OTHER ** Consult factory for availability of LF Model options
Precautionary Note: Not recommended for use with reciprocating pumps and similar applications, which may induce repetitious vibrations. Low flow rates which do not fully open the valve may result in undesirable noise and premature valve failure. Upstream flow disturbances, which create turbulence, may also result in rapid wear. Therefore, it is recommended that a minimum of 10 diameters of straight pipe be provided between the check valve and any upstream flow disturbances such as pumps, control valves, elbows, etc. See Installation Manual for details.
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600026
www.apollovalves.com
59 SERIESBronze Wye Strainer
DESCRIPTION:The APOLLOXPRESS® Model YB-PR (59 Series) Strainers with quick Press connections are designed to protect heating, cooling and non-potable plumbing systems and process equipment from unwanted foreign particles with minimal pressure loss. The valves are built for long reliable service with proven ASTM grade materials and stainless steel strainer. Features Leak Before Press® technology and 250 psig maximum working pressure.
FEATURES:• Fast, Reliable, Economical Press Installation • Ridgid® XL Press Tool Compatible • Leak Before Press® Technology • Self-Aligning Screen Design • Blowout Ball Valve Option • CRN 0E8959.5C • Made in USA, ARRA Compliant
PERFORMANCE RATING†: • Maximum Pressure: 250 psi (17.2 bar) non-shock • Temperature Range: 0°F - 250ºF (-18°C - 121°C) • Low Pressure Steam - Max. working pressure: 15 psi
† APOLLOXPRESS® connectors are designed for direct mechanical connection to ASTM B88-Type K, L, and M copper tubing in the hard drawn condition. Press connectors are not suitable for flammable gas service.
MATERIAL SPECIFICATIONS:Part Name MaterialBody Cast Bronze, ASTM B584 Cap Brass, ASTM B16 Connector Housing ASTM B16 Brass Connector O-Ring NSF grade EPDM Screen 304 Stainless Steel Cap Seal (1/2”) Teflon® O-Ring Cap Seal (3/4” – 2”) PTFE Gasket
DIMENSIONS (IN)Model
NumberPart
Number Size Length Cv Wt (lbs)
YB12-PR 59-003-01PR 1/2” 4.75” 5 1.0 YB34-PR 59-004-01PR 3/4” 6.1” 15 2.0 YB1-PR 59-005-01PR 1” 7.25” 28 3.0
YB114-PR 59-006-01PR 1-1/4” 7.62” 55 3.8 YB112-PR 59-007-01PR 1-1/2” 8.25” 70 5.7
YB2-PR 59-008-01PR 2” 10.3” 9 99 7.7 For liquids, the flow coefficient - Cv - expresses the flow capacity in gallons per minute (GPM) of 60°F water with a pressure drop of 1 psi (lb/in2).
OPTIONS (SUFFIX) (01) – 50 Mesh (Standard 1/2” models) (01) – 20 Mesh (Standard ¾” - 2” models) (02) – Tapped Cap (P2) – Tapped Cap with Plug (06) – Tapped cap with Ball Valve
Consult factory for availability of alternate screen sizes.
Not intended for potable water
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
27
59LF SERIESLead Free Bronze Wye Strainer
DESCRIPTION:The Lead Free* APOLLOXPRESS® YB-PRLF Strainers with quick Press connections are designed to protect plumbing and heating systems including potable water from unwanted foreign particles with minimum pressure loss. The valves are built for long reliable service with proven ASTM grade materials including a Lead Free* bronze body and stainless steel strainer.
FEATURES:• Lead Free* Bronze and Brass Construction • ANSI 3rd party Certified Lead-Free* • Fast, Reliable, Economical Press Installation • Ridgid® XL Press Tool Compatible • Leak Before Press® Technology • Self-Aligning SS Screen Design • Blowout Ball Valve Option • CRN 0E8959.5C • Made in USA, ARRA Compliant
PERFORMANCE RATING†: • Maximum Pressure: 250 psi (17.2 bar) non-shock • Temperature Range: 0°F - 250ºF (-18°C - 121°C) • Low Pressure Steam - Max. working pressure: 15 psi
† APOLLOXPRESS® connectors are designed for direct mechanical connection to ASTM B88-Type K, L, and M copper tubing in the hard drawn condition. Press connectors are not suitable for flammable gas service.
APPROVALS • NSF/ANSI 372 Certified Lead Free (0.25% Lead Max.)
* LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with US Federal Public Law 111-380 and Safe Drinking Water Act. ANSI 3rd party approved and listed.
MATERIAL SPECIFICATIONS:Part Name MaterialBody ASTM B584 C89836 Bronze Cap C27451 Brass Connector Housing C27451 Brass Connector O-Ring NSF grade EPDM Screen 304 Stainless Steel Cap Seal (1/2”) Teflon® O-Ring Cap Seal (3/4” – 2”) PTFE Gasket
DIMENSIONS (IN)Model
NumberLF Part
Number Size Length Cv Wt (lbs)
YB12-PRLF 59LF-003-01PR 1/2” 4.75” 5 1.0 YB34-PRLF 59LF-004-01PR 3/4” 6.1” 15 2.0 YB1-PRLF 59LF-005-01PR 1” 7.25” 28 3.0
YB114-PRLF 59LF-006-01PR 1-1/4” 7.62” 55 3.8 YB112-PRLF 59LF-007-01PR 1-1/2” 8.25 70 5.7
YB2-PRLF 59LF-008-01PR 2” 10.39 99 7.7 For liquids, the flow coefficient - Cv - expresses the flow capacity in gallons per minute (GPM) of 60°F water with a pressure drop of 1 psi (lb/in2).
OPTIONS (SUFFIX) (01) – 50 Mesh (Standard 1/2” models) (01) – 20 Mesh (Standard ¾” - 2” models) (02) – Tapped Cap (P2) – Tapped Cap with Plug (06) – Tapped cap with Ball Valve
Consult factory for availability of alternate screen sizes.
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600028
www.apollovalves.com
Available in Press sizes ½” – 2”, two models cover
residential, commercial and institutional applications. Featuring
sturdy bronze bodies and high flow rates, valves are 100% factory
tested and preset at 50 psi. Press connections incorporate Leak
Before Press® technology.
Water
Press
ureRe
ducin
g Valv
es
Available in both Standardand Lead Free Models
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600030
www.apollovalves.com
DESCRIPTION:The Lead Free* APOLLOXPRESS® Model PR-PRLF (36LF Series) Heavy Duty Bronze Pressure Reducing Valves with Press connections are designed to protect residential and commercial potable water distribution systems by controlling excessive pressures. The valves are built for long reliable service with proven ASTM grade Lead Free* materials.
FEATURES:• ANSI 3rd party Certified Lead-Free* • Fast, Reliable, Economical Press Installation • Ridgid® XL Press Tool Compatible • Leak Before Press® Technology • Corrosion Resistant Bronze Body and Cover • Integral SS Strainer • Balanced Piston Design • Internal Thermal Expansion By-pass • High and Low Pressure Range Options • Pressure Gauge Connection Option • Made in USA, ARRA Compliant
PERFORMANCE RATING: • Maximum Press Fitting Pressure: 250 psi (17.2 bar) • Maximum Temperature: 180ºF (82°C)
APPROVALS • ASSE 1003-2009; “Water Pressure Reducing Valves” • CSA B356 “Water pressure reducing valves…” • NSF/ANSI 372 Certified Lead Free (0.25% Lead Max.)
36LF SERIESLead Free Pressure Reducing Valve
* LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with US Federal Public Law 111-380 and Safe Drinking Water Act. ANSI 3rd party approved and listed.
MATERIAL SPECIFICATIONS:Part Name MaterialBody ASTM B584 C89836 Bronze Cover ASTM B584 C84400 Bronze Diaphragm FDA Grade Buna W/ Polyester Seat disc FDA Grade EPDM Stem C27451 Brass Spring Stainless Steel O-Rings FDA Grade EPDM Connector Housing C27451 Brass Connector O-Ring FDA Grade EPDM
DIMENSIONS (IN)Model
NumberLF Part
Number Size Length Heightfrom CL Wt (lbs)
PR12-PRLF 36LF-203-01PR 1/2” 5.78” 4.75” 3.1 PR34-PRLF 36LF-204-01PR 3/4” 6.09” 4.75” 3.1 PR1-PRLF 36LF-205-01PR 1” 6.65” 5.9” 4.1
PR114-PRLF 36LF-206-01PR 1-1/4” 7.88” 7.49” 9.0 PR112-PRLF 36LF-207-01PR 1-1/2” 8.62” 7.49” 9.0
PR2-PRLF 36LF-208-01PR 2” 10.76” 9.76” 21.0 Also available: 36 Series for non-potable applications.
SIZE 12 - 1/2” 34 - 3/4” 1 - 1” 114 - 1-1/4” 112 - 1-1/2” 2 - 2”
PRESSURE GAUGE Blank – No Gauge Port P – W/ Gauge Port Plugged G – W/ Pressure Gauge
PRESSURE RANGE Blank – 25–75 PSIG L – 10-35 PSIG H – 75-125 PSIG
MODEL NUMBERING SYSTEMPR PRLF
Size Pressure Gauge Pressure Range
Example: PR-12H-PRLF is model number for 1/2” High Pressure set at 100 psi
FLOW CHART
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
31
DESCRIPTION:The Lead Free* APOLLOXPRESS® Model PRE-PRLF (36ELF Series) Pressure Reducing Valves with Press connections are easily installed to protect residential and commercial potable water distribution systems by automatically reducing excessive supply pressures. The dezincification resistant bronze body, stainless steel adjusting screw and dielectric polymer cage provide maximum corrosion resistance. Designed for easy in-line servicing with simple cartridge removal.
FEATURES:• ANSI 3rd party Certified Lead-Free* • Fast, Reliable, Economical Press Installation • Ridgid® XL Press Tool Compatible • Leak Before Press® Technology • Balanced Piston Design • Sealed Cage for vault installations • Built-in Thermal Expansion By-Pass • Large Area Integral Stainless Steel Strainer • Modular Seat Disc and Strainer Cartridge • Control Pressure Ranges: 15-75 psi and 75-150 psi • Factory Tested and Preset at 50 or 100 psi • High flow / high efficiency design • Made in USA, ARRA Compliant
APPROVALS • NSF/ANSI 61-8 • NSF/ANSI 372 Certified Lead Free (0.25% Lead Max.)• ASSE 1003-2009; “Water Pressure Reducing Valves” • CSA B356 Water pressure reducing valves for domestic water supply systems
PERFORMANCE RATING: • Maximum Press Fitting Pressure: 250 psi (17.2 bar) • Maximum Temperature: 180ºF (82°C)
36ELF SERIESLead Free Pressure Reducing Valve
* LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with US Federal Public Law 111-380 and Safe Drinking Water Act. ANSI 3rd party approved and listed.
MATERIAL SPECIFICATIONS:Part Name MaterialBody UNS 89836 Lead Free Bronze Connector Housing C27451 Lead Free Brass Connector O-Ring NSF grade EPDM Screen Stainless Steel Spring Housing Glass Filled Celcon® Diaphragm NSF grade EPDM Seat disc FDA grade EPDM Adjusting Screw & Nut Stainless Steel Cage Seal Nitrile Stem C27451 Lead Free Brass Spring Music Wire ASTM A228 Cartridge O-rings NSF grade EPDM
DIMENSIONS (IN)Model
NumberLF Part
Number Size Length Heightfrom CL Wt (lbs)
PRE12-PRLF 36ELF-103-01PR 1/2” 5.46” 4.75” 1.5 PRE34-PRLF 36ELF-104-01PR 3/4” 5.79” 4.75” 1.7 PRE1-PRLF 36ELF-105-01PR 1” 5.91” 4.75” 2.3
Also available: 36E Series for non-potable applications.NEW LARGER SIZES 1-1/4” – 2” COMING SOON!
SIZE 12 - 1/2” 34 - 3/4” 1 - 1”
PRESSURE RANGE BLANK - 15 - 75 PSIG (-01 suffix) H - 75 -150 PSIG (-03 suffix)
MODEL NUMBERING SYSTEMPRE PRLF
Size Pressure Range
Example: PRE-12H-PRLF is model number for a 1/2” High Pressure set at 100 psi
FLOW CAPACITY
Pipe Size Fall-Off (PSI)
Pressure Differential (PSI)25 50 75
1/2”
10 10 13 16 15 13 18 22 20 17 23 29 30 22 29 36
3/4”
10 16 21 26 15 20 27 32 20 24 32 40 30 29 38 48
1”
10 25 33 41 15 30 42 52 20 34 45 56 30 35 47 59
Pressure differential is the difference between the supply pressure and adjusted outlet pressure measured in the static (closed) condition. Fall-off is the decrease in downstream regulated pressure as the flow increases.
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600032
www.apollovalves.com
The 4A Series of Reduced Pressure Principle Backflow Preventers
are available in APOLLOXPRESS® sizes from ½“ to 2”, with Leak
Before Press® technology. Featuring bronze bodies and innovative
cartridge check design, these assemblies provide protection of
potable water against health hazard conditions. Assemblies are
100% factory tested. Available with optional Apollo bronze strainers.
Back
flow
Preve
ntion
Available in both Standardand Lead Free Models
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600034
www.apollovalves.com
RPLF4A SERIESLead Free Reduced Pressure Valves
* LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with US Federal Public Law 111-380 and Safe Drinking Water Act. ANSI 3rd party approved and listed.
DESCRIPTION:The APOLLOXPRESS® Model RPLF4A Series Lead Free* Reduced Pressure Backflow Preventers with Press end connections provide maximum protection against back- siphonage or backpressure from substances that are hazardous to the potable water supply. The top accessed modular check valve cartridges provide captured springs, replaceable seats and reversible silicone seat discs. This Made in America / 5 year factory warranty assembly features APOLLOXPRESS® ball valves with stainless steel handles and trim and Leak Before Press® technology.
FEATURES:• Fast, Reliable, Economical Press Installation • ANSI 3rd party Certified Lead-Free* • Ridgid® XL Press Tool Compatible • Leak Before Press® Technology • Low pressure loss • Easily removable modular check valve cartridge • Captured stainless steel springs • Top-mounted test cocks for easy testing • Modular Relief Valve • APOLLOXPRESS® ball valves w/ SS handles & nuts standard • No special tools required for servicing • Made in USA, ARRA Compliant
PERFORMANCE RATING: • Maximum Working Pressure 175 psi • Temperature Range 33 ° F – 180 ° F
APPROVALS: • ASSE 1013 - Horizontal (1/2”-2”), • CSA B.64.4 - Horizontal (1/2”-2”) • Backflow assembly is approved by the Foundation for Cross- Connection Control and Hydraulic Research at the University of Southern California. APOLLOXPRESS® connections are optional factory installed connectors on each end of the approved assembly. - Horizontal (3/4” & 1”)• NSF/ANSI 372 Certified Lead Free (0.25% Lead Max.)
MATERIAL SPECIFICATIONS:Part Name MaterialBody, Caps, Ball Valve Shutoffs,Test cocks Bronze C89836 Lead Free*
Check Valve Cartridges Glass-Filled PPO
Springs 300 Series Stainless Steel Seat Discs Chloramine-resistant Silicone O-rings Chloramine-resistant EPDM
DIMENSIONS (IN)LF Part
Number Size A B C D E F Wt (lbs)
4ALF-203-T2FPR 1/2” 13 7 -3/8 7-1/8 2-7/8 3-1/4 3-7/8 7.4 4ALF-204-T2FPR 3/4” 14-7/8 8-1/2 7-3/8 3-1/8 3-1/2 3-7/8 9.0
4ALF-205-T2FPR 1” 16 -7/8 9-1/2 8 3-1/4 4 4 13.0
4ALF-206-T2PR 1-1/4” 21-1/8 11-3/4 9-7/8 5-1/8 4-1/2 5-3/8 19.1
4ALF-207-T2PR 1-1/2” 22 11-5/8 9-7/8 5-1/8 4-1/2 5-3/8 22.5
4ALF-208-T2PR 2” 24-3/4 12-3/4 11 5-7/8 5 6 34.6
AIR GAP DEVICES • AGD4A1 (1/2” – 1”) • AGD4A112 (1-1/4” – 1-1/2”) • AGD4A2 (2”)
MODEL NUMBERING SYSTEM4A XX - 2 0 X - T2 F XX OPTIONSMaterial SizeBlank - Standard 3 - 1/2” Blank - PR - APOLLOXPRESSLF - Lead Free 4 - 3/4” NPT Testcock
5 - 1” (1-1/4” x 2”)6 - 1-1/4” F - 7 - 1-1/2” SAE Testcock8 - 2” (1/2” - 1”)
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
35
RPLF4A SERIESLead Free Reduced Pressure Valves
FLOW CURVES:Curves developed from independent approval agencies actual tests – Consult factory for details. ■ indicates rated flow as determined by approval agencies, 7.5 ft/sec is the typical maximum Plumbing system flow rate.
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600036
www.apollovalves.com
The APOLLOXPRESS® small diameter fittings (available in sizes ½”
- 2”) feature copper-body construction for most configurations. The
lead-free design offers a Leak Before Press® feature. The forward
lip aids in the alignment of the copper tube during insertion,
reducing the risk of o-ring damage. These fittings are approved for
underground applications and are ideal for service and repair. Pre-
lubricated, they are fast and simple to install.
The APOLLOXPRESS® large diameter copper fittings (available
in sizes 2 ½” - 4”) feature a patented solid cross-section grab ring,
creating significant contact with the tube after pressing. The Leak
Before Press® feature allows water to flow past the sealing element
during pressure testing if the fitting has not been pressed. Last, but
certainly not least, we’ve added a visual element: if the break-away
band is still on the fitting, it needs to be checked.
Small
& La
rgeDia
meter
Fitti
ngs
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600038
www.apollovalves.com
FITTINGSCouplings
Small Diameter Large Diameter
COPPER COUPLING WITHOUT STOP Part No. Description Height Width Depth10075513 801 1/2 CxC CPLG W/O ST 0.95 1.72 0.9510075515 801 ¾ CxC CPLG W/O ST 1.24 1.89 1.2410075517 801 1 CxC CPLG W/O ST 1.49 2.07 1.4910075521 801 1¼ CxC CPLG W/O ST 1.75 2.33 1.7510075523 801 11/2 CxC CPLG W/O ST 2.09 3.10 2.0910075527 801 2 CxC CPLG W/O ST 2.56 3.41 2.5610061932 801 21/2 CxC CPLG W/O ST 3.16 4.65 3.1610061937 801 3 CxC CPLG W/O ST 3.68 4.70 3.6810061942 801 4 CxC CPLG W/O ST 4.70 5.53 4.70
Dimensions shown in inches
Large DiameterSmall Diameter
COPPER COUPLING WITH STOP Part No. Description Height Width Depth10075500 800 1/2 CxC CPLG W/ ST 0.95 1.72 0.9510075502 800 ¾ CxC CPLG W/ ST 1.24 1.89 1.2410075504 800 1 CxC CPLG W/ ST 1.49 2.06 1.4910075506 800 1¼ CxC CPLG W/ ST 1.75 2.33 1.7510075508 800 11/2 CxC CPLG W/ ST 2.09 3.10 2.0910075510 800 2 CxC CPLG W/ ST 2.56 3.42 2.5610061947 800 21/2 CxC CPLG W/ ST 3.16 4.33 3.1610061952 800 3 CxC CPLG W/ ST 3.68 4.65 3.6810061957 800 4 CxC CPLG W/ ST 4.70 5.53 4.70
Dimensions shown in inches
Small Diameter
Large Diameter
Part No. Description Height Width Depth10075900 801R ¾x1/2 CxC CPLG 1.24 2.14 1.2410075144 801R 1x1/2 CxC CPLG 1.49 2.37 1.4910075898 801R 1x¾ CxC CPLG 1.49 2.30 1.4910066073 801R 1¼x1/2 CxC CPLG 1.75 4.27 1.7510066001 801R 1¼x¾ CxC CPLG 1.75 4.13 1.7510075896 801R 1¼x1 CxC CPLG 1.75 2.40 1.7510066380 801R 11/2x1/2 CxC CPLG 2.09 4.86 2.0910066381 801R 11/2x¾ CxC CPLG 2.09 4.89 2.0910066003 801R 11/2x1 CxC CPLG 2.09 4.60 2.0910075128 801R 11/2x1¼ CxC CPLG 2.11 2.87 2.1110066082 801R 2x1/2 CxC CPLG 2.56 5.86 2.5610066398 801R 2x¾ CxC CPLG 2.56 5.70 2.5610066005 801R 2x1 CxC CPLG 2.56 5.49 2.5610066072 801R 2x1¼ CxC CPLG 2.56 5.18 2.5610075130 801R 2x11/2 CxC CPLG 2.56 3.50 2.5610066440 801R 21/2x1 CxC CPLG 3.16 6.75 3.1610066441 801R 21/2x1¼ CxC CPLG 3.16 6.62 3.1610066442 801R 21/2x11/2 CxC CPLG 3.16 6.72 3.1610066074 801R 21/2x2 CxC CPLG 3.16 6.68 3.1610066444 801R 3x¾ CxC CPLG 3.68 7.48 3.6810066445 801R 3x11/2 CxC CPLG 3.68 7.26 3.6810066446 801R 3x2 CxC CPLG 3.68 7.39 3.6810066076 801R 3x21/2 CxC CPLG 3.68 7.63 3.6810066447 801R 4x2 CxC CPLG 4.70 8.62 4.7010066151 801R 4x21/2 CxC CPLG 4.70 8.90 4.7010066152 801R 4x3 CxC CPLG 4.70 8.93 4.70
Dimensions shown in inches
COPPER REDUCER COUPLING
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
39
FITTINGS
Part No. Description Height Width Depth10075060 806 1/2 CxC 45 EL 1.52 2.14 0.9510075062 806 ¾ CxC 45 EL 1.91 2.62 1.2410075064 806 1 CxC 45 EL 2.28 3.10 1.4910075090 806 1¼ CxC 45 EL 2.69 3.62 1.7510075092 806 11/2 CxC 45 EL 3.16 4.20 2.0910075094 806 2 CxC 45 EL 3.73 5.13 2.5810062052 806 21/2 CxC 45 EL 4.67 5.89 3.1610062057 806 3 CxC 45 EL 5.31 6.57 3.6810062062 806 4 CxC 45 EL 6.67 8.10 4.70
Dimensions shown in inches
Small Diameter Large Diameter
COPPER 45° ELBOW
Part No. Description Height Width Depth10075054 806-2 1/2 FTGxC 45 ST EL 1.89 2.60 0.9510075056 806-2 ¾ FTGxC 45 ST EL 2.25 2.96 1.2410075058 806-2 1 FTGxC 45 ST EL 2.33 3.23 1.4910075084 806-2 1¼ FTGxC 45 ST EL 2.55 3.61 1.7510075086 806-2 11/2 FTGxC 45 ST EL 3.06 4.09 2.1110075088 806-2 2 FTGxC 45 ST EL 3.95 5.29 2.5510062037 806-2 21/2 FTGxC 45 EL 4.74 5.97 3.1610062042 806-2 3 FTGxC 45 EL 5.36 6.62 3.6810062047 806-2 4 FTGxC 45 EL 6.74 8.18 4.70
Dimensions shown in inches
Large DiameterSmall Diameter
COPPER 45° STREET ELBOW
Part No. Description Height Width Depth10075554 807 1/2 CXC 90 DEG. EL 1.97 1.97 0.9510075556 807 ¾ CXC 90 DEG. EL 2.58 2.58 1.2410075052 807 1 CxC 90 EL 2.97 2.97 1.4910075078 807 1¼ CxC 90 EL 3.83 3.83 1.7510075080 807 11/2 CxC 90 EL 4.37 4.37 2.1110075082 807 2 CxC 90 EL 5.35 5.35 2.58
Reducing Elbow10066101 807 ¾x1/2 CxC 90 EL 3.67 2.58 1.2410066099 807 1x1/2 CxC 90 EL 4.43 2.97 1.4910066083 807 1x¾ CxC 90 EL 4.27 2.97 1.49
Close Turn Elbow - Large Diameter Copper10062021 807-C 21/2 CxC 90 EL 5.23 5.23 3.1610062027 807-C 3 CxC 90 EL 5.95 5.95 3.6810062032 807-C 4 CxC 90 EL 7.44 7.44 4.70
Close Turn Reducing Elbow - Large Diameter Copper10066460 807 3x2 CxC 90 EL 8.41 5.94 3.6810066141 807 3x21/2 CxC 90 EL 5.94 8.93 3.68
Long Turn Elbow - Large Diameter Copper10062066 807-L 21/2 CxC 90 EL 6.67 6.67 3.1610062067 807-L 3 CxC 90 EL 8.56 8.56 3.6810062069 807-L 4 CxC 90 EL 9.75 9.75 4.70
Dimensions shown in inches
Small Diameter Large DiameterClose Turn
Large DiameterClose TurnReducing
Large DiameterLong Turn
COPPER 90° ELBOW
Elbows
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600040
www.apollovalves.com
FITTINGS
Part No. Description Height Width Depth10075566 807-2 1/2 FTGXC 90 ST EL 2.38 1.80 0.9510075568 807-2 3/4 FTGXC 90 ST EL 2.82 2.37 1.2410075046 807-2 1 FTGxC 90 ST EL 3.56 2.87 1.4910075072 807-2 1¼ FTGxC 90 ST EL 3.85 3.64 1.7510075074 807-2 11/2 FTGxC 90 ST EL 4.40 4.14 2.1110075076 807-2 2 FTGxC 90 ST EL 5.56 5.12 2.58
Close Turn Street Elbow - Large Diameter Copper10062007 807-C-2 21/2 CxC 90 EL 5.54 4.96 3.1610062012 807-C-2 3 CxC 90 EL 6.25 5.66 3.6810062017 807-C-2 4 CxC 90 EL 7.89 7.15 4.70
Long Turn Street Elbow - Large Diameter Copper10062071 807-L-2 21/2 CxC 90 EL 6.92 6.40 3.1610062073 807-L-2 3 CxC 90 EL 8.71 8.28 3.6810062074 807-L-2 4 CxC 90 EL 10.98 10.44 4.70
Dimensions shown in inches
Small Diameter
Large DiameterClose Turn
Large DiameterLong Turn
COPPER 90° STREET ELBOW
Part No. Description Height Width Depth10066578 8707-3-2 1/2 FTGxF 90 EL 2.42 2.87 1.02
Dimensions shown in inches
COPPER & LOW LEAD BRASS 90° FEMALE ELBOW
Part No. Description Height Width Depth10075367 8707-3-5 1/2x⅜ CxF 90 DRP EAR EL 1.09 2.56 1.5910075366 8707-3-5 1/2 CxF 90 DRP EAR EL 1.35 2.71 2.1210075368 8707-3-5 ¾ CxF 90 DRP EAR EL 1.62 3.28 2.3410075369 8707-3-5 1 CxF 90 DRP EAR EL 1.96 3.77 2.59
Dimensions shown in inches
COPPER & LOW LEAD BRASS 90° DROP EAR ELBOW
Elbows
Part No. Description Height Width Depth10066566 8707-3 1/2x⅜ CxF 90 RED EL 2.74 1.97 0.9410066560 8707-3 1/2 CxF 90 EL 3.00 2.10 1.0210066567 8707-3 1/2x¾ CxF 90 RED EL 2.99 2.13 1.2610066568 8707-3 ¾x1/2 CxF 90 RED EL 3.47 2.58 1.2410066561 8707-3 ¾ CxF 90 EL 3.54 2.58 1.2510066569 8707-3 1x1/2 CxF 90 RED EL 3.68 2.97 1.4910066562 8707-3 1 CxF 90 EL 4.07 2.99 1.5310066563 8707-3 1¼ CxF 90 EL 4.91 3.92 1.9310066564 8707-3 11/2 CxF 90 EL 5.63 4.43 2.2010066565 8707-3 2 CxF 90 EL 6.60 5.43 2.74
Dimensions shown in inches
COPPER & LOW LEAD BRASS 90° FEMALE ELBOW
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
41
FITTINGSElbows
Part No. Description Height Width Depth10066570 8707-4 1/2 CxM 90 EL 3.43 1.97 0.9410066576 8707-4 1/2x¾ CxM 90 RED EL 3.62 2.03 1.0510066577 8707-4 ¾x1/2 CxM 90 RED EL 3.94 2.58 1.2410066571 8707-4 ¾ CxM 90 EL 4.00 2.58 1.2410066572 8707-4 1 CxM 90 EL 4.76 2.97 1.4910066573 8707-4 1¼ CxM 90 EL 5.54 3.83 1.7510066574 8707-4 11/2 CxM 90 EL 6.30 4.37 2.1110066575 8707-4 2 CxM 90 EL 7.25 5.35 2.58
Dimensions shown in inches
COPPER & LOW LEAD BRASS 90° MALE ELBOW
Part No. Description Height Width Depth10075906 811 ¾x¾x1/2 CxCxC TEE 2.07 3.13 1.2410075904 811 1x1x1/2 CxCxC TEE 2.32 3.30 1.4910075902 811 1x1x¾ CxCxC TEE 2.44 3.67 1.5010075106 811 1¼x1¼x1/2 CxCxC TEE 3.04 4.12 1.7510075102 811 1¼x1¼x¾ CxCxC TEE 3.10 4.12 1.7510075104 811 1¼x1¼x1 CxCxC TEE 3.04 4.12 1.7510066015 811 11/2x11/2x1/2 CxCxC TEE 4.22 4.00 2.1110075108 811 11/2x11/2x¾ CxCxC TEE 3.07 4.00 2.1110075110 811 11/2x11/2x1 CxCxC TEE 3.16 4.25 2.1110075112 811 11/2x11/2x1¼ CxCxC TEE 3.28 4.50 2.1110066385 811 2x2x1/2 CxCxC TEE 6.69 5.75 2.5810075114 811 2x2x¾ CxCxC TEE 3.65 4.39 2.5810075116 811 2x2x1 CxCxC TEE 3.72 4.75 2.5810075118 811 2x2x1¼ CxCxC TEE 3.84 5.00 2.5810075120 811 2x2x11/2 CxCxC TEE 4.35 5.75 2.5810068042 811R 21/2x21/2x1/2 REDUCED TEE 5.58 7.15 3.1610068045 811R 21/2x21/2x¾ REDUCED TEE 5.42 7.15 3.1610068048 811R 21/2x21/2x1 REDUCED TEE 5.21 7.15 3.1610068051 811R 21/2x21/2x1¼ REDUCED TEE 4.58 7.15 3.1610068054 811R 21/2x21/2x11/2 REDUCED TEE 4.83 7.15 3.1610068057 811R 21/2x21/2x2 REDUCED TEE 5.08 7.15 3.1610062079 811 3x3x21/2 CxCxC TEE 5.90 7.95 3.6810068060 811R 3x3x1/2 REDUCED TEE 6.21 7.95 3.6810068063 811R 3x3x¾ REDUCED TEE 6.05 7.96 3.6810068066 811R 3x3x1 REDUCED TEE 5.84 7.95 3.6810068069 811R 3x3x 1¼ REDUCED TEE 5.09 7.95 3.6810068072 811R 3x3x 11/2 REDUCED TEE 5.34 7.95 3.6810068075 811R 3x3x2 REDUCED TEE 5.59 7.95 3.6810062078 811 4x4x21/2 CxCxC TEE 6.91 9.84 4.7010062076 811 4x4x3 CxCxC TEE 7.28 9.84 4.7010068078 811R 4x4x1/2 REDUCED TEE 7.33 9.84 4.7010068081 811R 4x4x¾ REDUCED TEE 7.17 9.84 4.7010068084 811R 4x4x1 REDUCED TEE 6.96 9.84 4.7010068087 811R 4x4x1¼ REDUCED TEE 6.10 9.84 4.7010068090 811R 4x4x11/2 REDUCED TEE 6.35 9.84 4.7010068093 811R 4x4x2 REDUCED TEE 6.60 9.84 4.70
Dimensions shown in inches
Small Diameter
Large Diameter
Single Piece
COPPER REDUCING OUTLET TEE
Tees
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600042
www.apollovalves.com
FITTINGSTees
Part No. Description Height Width Depth10066590 811 ¾x1/2x1/2 CxCxC TEE 2.07 4.25 1.2410066039 811 ¾x1/2x¾ CxCxC TEE 2.17 4.58 1.2410066591 811 1x1/2x1/2 CxCxC TEE 2.32 4.74 1.5010066592 811 1x1/2x¾ CxCxC TEE 2.44 5.07 1.5010066066 811 1x1/2x1 CxCxC TEE 2.51 5.30 1.5010066593 811 1x¾x1/2 CxCxC TEE 2.32 4.59 1.5010066594 811 1x¾x¾ CxCxC TEE 2.44 4.91 1.5010066040 811 1x¾x1 CxCxC TEE 2.51 5.14 1.5010066102 811 1x¾x1¼ CxCxC TEE 2.94 7.04 1.7510066049 811 1¼x1/2x1/2 CxCxC TEE 3.04 5.87 1.7510066080 811 1¼x1/2x1 CxCxC TEE 3.04 5.50 1.7510066392 811 1¼x1/2x1¼ CxCxC TEE 2.94 5.86 1.7510066051 811 1¼x¾x1/2 CxCxC TEE 3.04 5.73 1.7510066052 811 1¼x¾x¾ CxCxC TEE 3.10 5.73 1.7510066053 811 1¼x¾x1 CxCxC TEE 3.04 5.73 1.7510066054 811 1¼x¾x1¼ CxCxC TEE 2.94 5.73 1.7510066044 811 1¼x¾x11/2 CxCxC TEE 3.43 8.04 1.7510066055 811 1¼x1x1/2 CxCxC TEE 3.04 5.44 1.7510075122 811 1¼x1x¾ CxCxC TEE 3.10 4.10 1.7510075124 811 1¼x1x1 CxCxC TEE 3.04 4.10 1.7510066056 811 1¼x1x1¼ CxCxC TEE 2.94 5.44 2.1110066395 811 1¼x1x11/2 CxCxC TEE 3.43 7.75 2.1110066394 811 11/2x1/2x1¼ CxCxC TEE 3.28 6.38 2.1110066009 811 11/2x1/2x11/2 CxCxC TEE 3.43 6.63 2.1110066195 811 11/2x¾x1/2 CxCxC TEE 4.22 5.54 2.1110066383 811 11/2x¾x¾ CxCxC TEE 3.07 5.91 2.1110066397 811 11/2x¾x1 CxCxC TEE 3.16 6.16 2.1110066058 811 11/2x¾x1¼ CxCxC TEE 3.28 5.97 2.1110066043 811 11/2x¾x11/2 CxCxC TEE 3.43 6.66 2.1110066042 811 11/2x¾x2 CxCxC TEE 4.17 10.11 2.1110066011 811 11/2x1x¾ CxCxC TEE 3.07 5.62 2.1110066012 811 11/2x1x1 CxCxC TEE 3.16 5.87 2.1110066081 811 11/2x1x1¼ CxCxC TEE 3.28 6.12 2.1110066013 811 11/2x1x11/2 CxCxC TEE 3.43 6.37 2.1110066108 811 11/2x1x2 CxCxC TEE 4.17 9.90 2.1110066059 811 11/2x1¼x1/2 CxCxC TEE 4.22 5.38 2.1110066060 811 11/2x1¼x¾ CxCxC TEE 3.07 5.38 2.1110066014 811 11/2x1¼x1 CxCxC TEE 3.16 5.63 2.1110075126 811 11/2x1¼x1¼ CxCxC TEE 3.26 4.37 2.1110066393 811 11/2x1¼x11/2 CxCxC TEE 3.43 6.13 2.1110066109 811 11/2x1¼x2 CxCxC TEE 4.17 9.59 2.5810066384 811 2x1/2x2 CxCxC TEE 4.17 8.28 2.5810066121 811 2x¾x¾ CxCxC TEE 3.65 6.67 2.5810066092 811 2x¾x11/2 CxCxC TEE 4.35 8.11 2.5810066388 811 2x¾x2 CxCxC TEE 4.17 8.11 2.5810066079 811 2x1x1/2 CxCxC TEE 4.80 6.46 2.5810066062 811 2x1x¾ CxCxC TEE 3.65 6.46 2.5810066017 811 2x1x1 CxCxC TEE 3.72 6.90 2.5810066126 811 2x1x1¼ CxCxC TEE 3.84 7.15 2.5810066197 811 2x1x11/2 CxCxC TEE 4.35 7.90 2.5810066018 811 2x1x2 CxCxC TEE 4.17 7.90 2.5810066063 811 2x1¼x¾ CxCxC TEE 3.65 6.14 2.5810066129 811 2x1¼x1 CxCxC TEE 3.71 6.59 2.5810066019 811 2x1¼x1¼ CxCxC TEE 3.84 6.84 2.5810066125 811 2x1¼x11/2 CxCxC TEE 4.35 7.59 2.5810066064 811 2x1¼x2 CxCxC TEE 4.17 7.59 2.5810066065 811 2x11/2x1/2 CxCxC TEE 4.80 6.31 2.5810066020 811 2x11/2x¾ CxCxC TEE 3.65 6.31 2.5810066021 811 2x11/2x1 CxCxC TEE 3.71 6.75 2.5810066022 811 2x11/2x1¼ CxCxC TEE 3.84 7.00 2.5810066023 811 2x11/2x11/2 CxCxC TEE 4.35 7.75 2.5810066024 811 2x11/2x2 CxCxC TEE 4.17 7.75 2.58
Dimensions shown in inches
COPPER REDUCING RUN/OUTLET TEE SMALL DIAMETER
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
43
FITTINGSTees
Part No. Description Height Width Depth10075578 811 1/2 CxCxC TEE 1.78 3.04 0.9510075580 811 ¾ CxCxC TEE 2.17 3.47 1.2410075582 811 1 CxCxC TEE 2.51 3.90 1.5010075096 811 1¼ CxCxC TEE 2.94 4.12 1.7510075098 811 11/2 CxCxC TEE 3.43 4.75 2.1110075100 811 2 CxCxC TEE 4.17 5.75 2.5810057518 811 21/2 CXCXC COPPER TEE 5.33 7.15 3.1610062072 811 3 CXCXC COPPER TEE 6.40 7.95 3.6810062077 811 4 CXCXC COPPER TEE 7.66 9.84 4.70
Dimensions shown in inches
Small Diameter Large Diameter
COPPER TEE
Part No. Description Height Width Depth10066499 811 2x11/2x21/2 CxCxC TEE 5.33 11.99 3.1610066595 811 21/2x¾x2 CxCxC TEE 5.08 9.74 3.1610066502 811 21/2x¾x21/2 CxCxC TEE 5.33 9.74 3.1610066596 811 21/2x1x2 CxCxC TEE 5.08 9.55 3.1610066514 811 21/2x1x21/2 CxCxC TEE 5.33 9.55 3.1610066504 811 21/2x1¼x21/2 CxCxC TEE 5.33 9.43 3.1610066597 811 21/2x11/2x11/2 CxCxC TEE 4.83 9.52 3.1610066598 811 21/2x11/2x2 CxCxC TEE 5.08 9.52 3.1610066507 811 21/2x11/2x21/2 CxCxC TEE 5.33 9.52 3.1610066599 811 21/2x2x¾ CxCxC TEE 5.42 9.60 3.1610066600 811 21/2x2x1 CxCxC TEE 5.21 9.60 3.1610066601 811 21/2x2x1¼ CxCxC TEE 4.58 9.60 3.1610066602 811 21/2x2x11/2 CxCxC TEE 4.83 9.60 3.1610066603 811 21/2x2x2 CxCxC TEE 5.08 9.60 3.1610066174 811 21/2x2x21/2 CxCxC TEE 5.33 9.60 3.1610066515 811 21/2x2x3 CxCxC TEE 6.18 13.41 3.6810066522 811 3x¾x21/2 CxCxC TEE 5.90 10.77 3.6810066523 811 3x¾x3 CxCxC TEE 6.18 10.77 3.6810066524 811 3x1x21/2 CxCxC TEE 5.90 10.58 3.6810066525 811 3x1x3 CxCxC TEE 6.18 10.58 3.6810066526 811 3x1¼x3 CxCxC TEE 6.18 10.45 3.6810066527 811 3x11/2x3 CxCxC TEE 6.18 10.55 3.6810066604 811 3x2x2 CxCxC TEE 5.59 10.42 3.6810066529 811 3x2x21/2 CxCxC TEE 5.90 10.42 3.6810066530 811 3x2x3 CxCxC TEE 6.18 10.42 3.6810066605 811 3x21/2x2 CxCxC TEE 5.59 10.93 3.6810066136 811R 3X21/2X21/2 CXCXC COPPER TEE 5.90 10.93 3.6810066137 811R 3X21/2X3 CXCXC COPPER TEE 6.18 10.93 3.6810066538 811 4x11/2x3 CxCxC TEE 7.28 13.07 4.7010066539 811 4x2x4 CxCxC TEE 7.66 12.96 4.7010066138 811R 4X21/2X4 CXCXC COPPER TEE 7.66 13.23 4.7010066606 811 4x3x11/2 CxCxC TEE 6.35 13.24 4.7010066607 811 4x3x2 CxCxC TEE 6.60 13.24 4.7010066139 811R 4X3X21/2 CXCXC COPPER TEE 6.91 13.22 4.7010066096 811 4x3x3 CxCxC TEE 7.28 13.22 4.7010066140 811R 4X3X4 CXCXC COPPER TEE 7.64 13.24 4.70
Dimensions shown in inches
COPPER REDUCING RUN/OUTLET TEE LARGE DIAMETER
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600044
www.apollovalves.com
FITTINGSTees
Part No. Description Height Width Depth10066070 811 1/2x1/2x¾ CxCxC BH TEE 2.17 5.70 1.2410066006 811 1/2x1/2x1 CxCxC BH TEE 2.51 6.69 1.5010066071 811 ¾x¾x1 CxCxC BH TEE 2.51 6.38 1.5010066008 811 1x1x1¼ CxCxC BH TEE 2.94 6.75 1.7510066128 811 1x1x2 CxCxC BH TEE 4.16 10.05 2.5810066107 811 1¼x1¼x2 CxCxC BH TEE 4.16 9.42 2.5810066090 811 11/2x11/2x2 CxCxC BH TEE 4.16 9.75 2.5810066550 811 11/2x11/2x3 CxCxC BH TEE 6.18 13.15 3.6810066551 811 2x2x3 CxCxC BH TEE 6.18 12.89 3.6810066135 811 21/2x21/2x3 CxCxC BH TEE 6.18 13.92 3.6810066094 811 21/2x21/2x4 CxCxC BH TEE 7.66 16.98 4.70
Dimensions shown in inches
Large Diameter
Small Diameter
COPPER BULLHEAD TEE
Part No. Description Height Width Depth10066579 8712 1/2 CxCxF TEE 2.65 3.04 1.0110066581 8712 ¾x¾x1/2 CxCxF TEE 3.01 3.13 1.2410066580 8712 ¾ CxCxF TEE 3.14 3.47 1.2510066582 8712 1x1x1/2 CxCxF TEE 3.35 3.67 1.4810066583 8712 1x1x¾ CxCxF TEE 3.42 3.67 1.4810066584 8712 1¼x1¼x1/2 CxCxF TEE 4.04 4.12 1.7510066585 8712 1¼x1¼x¾ CxCxF TEE 4.10 4.12 1.7510066586 8712 11/2x11/2x1/2 CxCxF TEE 4.01 4.00 2.1110066587 8712 11/2x11/2x¾ CxCxF TEE 4.08 4.00 2.1110066588 8712 2x2x1/2 CxCxF TEE 4.57 4.39 2.5810066589 8712 2x2x¾ CxCxF TEE 4.64 4.39 2.58
Dimensions shown in inches
COPPER & LOW LEAD BRASS FEMALE OUTLET TEE
Part No. Description Height Width Depth10075166 817 1/2 TUBE CAP 0.95 1.13 0.9510075168 817 ¾ TUBE CAP 1.24 1.19 1.2410075170 817 1 TUBE CAP 1.49 1.35 1.4910075172 817 1¼ TUBE CAP 1.75 1.53 1.7510075174 817 11/2 TUBE CAP 2.11 1.80 2.1110075176 817 2 TUBE CAP 2.58 2.15 2.5810062142 817 21/2 COPPER TUBE CAP 3.16 3.64 3.1610062147 817 3 COPPER TUBE CAP 3.68 4.07 3.6810062152 817 4 COPPER TUBE CAP 4.70 4.96 4.70
Dimensions shown in inches
Small Diameter Large Diameter
COPPER TUBE CAP
Tube Caps
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
45
FITTINGSReducers
Part No. Description Height Width Depth10075146 818 ¾x1/2 FTGxC RED 0.95 2.03 0.9510075150 818 1x1/2 FTGxC RED 1.25 2.37 1.2510075148 818 1x¾ FTGxC RED 1.25 2.22 1.2510075336 818 1¼x1/2 FTGxC RED 1.38 2.83 1.3810075154 818 1¼x¾ FTGxC RED 1.38 2.69 1.3810075156 818 1¼x1 FTGxC RED 1.50 2.40 1.5010075332 818 11/2x1/2 FTGxC RED 1.63 3.19 1.6310075334 818 11/2x¾ FTGxC RED 1.63 3.22 1.6310075158 818 11/2x1 FTGxC RED 1.63 2.93 1.6310075160 818 11/2x1¼ FTGxC RED 1.75 2.69 1.7510075338 818 2x1/2 FTGxC RED 2.13 4.04 2.1310075340 818 2x¾ FTGxC RED 2.13 3.87 2.1310075162 818 2x1 FTGxC RED 2.13 3.66 2.1310075152 818 2x1¼ FTGxC RED 2.13 3.34 2.1310075164 818 2x11/2 FTGxC RED 2.13 3.51 2.1310068025 818 21/2x1/2 FTGxC RED 2.63 4.59 2.6310068001 818 21/2x¾ FTGxC RED 2.63 4.50 2.6310068002 818 21/2x1 FTGxC RED 2.63 4.31 2.6310068017 818 21/2x1¼ FTGxC RED 2.63 4.18 2.6310068004 818 21/2x11/2 FTGxC RED 2.63 4.28 2.6310075165 818 21/2x2 FTGxC RED 2.63 4.36 2.6310068005 818 3x1/2 FTGxC RED 3.13 5.01 3.1310068019 818 3x¾ FTGxC RED 3.13 4.92 3.1310068007 818 3x1 FTGxC RED 3.13 4.73 3.1310068008 818 3x1¼ FTGxC RED 3.13 4.60 3.1310068020 818 3x11/2 FTGxC RED 3.13 4.70 3.1310068010 818 3x2 FTGxC RED 3.13 4.57 3.1310057500 818 3x21/2 FTGxC RED 3.16 5.09 3.1610068011 818 4x1/2 FTGxC RED 4.13 6.02 4.1310068022 818 4x¾ FTGxC RED 4.13 5.93 4.1310068013 818 4x1 FTGxC RED 4.13 5.74 4.1310068014 818 4x1¼ FTGxC RED 4.13 5.61 4.1310068023 818 4x11/2 FTGxC RED 4.13 5.75 4.1310068016 818 4x2 FTGxC RED 4.13 5.60 4.1310057503 818 4x21/2 FTGxC RED 4.13 6.02 4.1310057506 818 4x3 FTGxC RED 4.13 5.90 4.13
Dimensions shown in inches
Large DiameterSmall Diameter
COPPER FITTING REDUCER
CouplingsPart No. Description Height Width Depth10075030 801 1/2 CXC COUPLING W/O STOP 0.95 3.30 0.9510075032 801 ¾ CXC COUPLING W/O STOP 1.24 3.00 1.2410075034 801 1 CXC COUPLING W/O STOP 1.49 3.58 1.49
Dimensions shown in inches
COPPER EXTENDED LENGTH COUPLING WITHOUT STOP
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600046
www.apollovalves.com
FITTINGSCrossovers
Part No. Description Height Width Depth10075370 836 1/2 CxC CROSSOVER 1.54 4.50 0.9510075372 836 ¾ CxC CROSSOVER 2.06 5.50 1.24
Dimensions shown in inches
COPPER CROSSOVER
Part No. Description Height Width Depth125 Lb.
10075702 8741 2 Copper 125 lb. 3.67 6.00 6.0010061761 8741 21/2 Copper 125 lb. 3.62 7.00 7.0010061767 8741 3 Copper 125 lb. 3.61 7.50 7.5010061736 8741 4 Copper 125 lb. 3.76 9.00 9.00
150 Lb.10061763 8771 21/2 Copper 150 lb. 3.62 7.00 7.0010061769 8771 3 Copper 150 lb. 3.61 7.50 7.5010061738 8771 4 Copper 150 lb. 3.76 9.00 9.00
Dimensions shown in inches
COPPER LARGE DIAMETER FLANGE
Flanges
Part No. Description Height Width Depth10075780 803R 1/2x⅜ CxF ADAPT 0.87 1.34 0.8710075750 803 1/2 CxF ADAPT 1.01 1.52 1.0110075782 803R 1/2x¾ CxF ADAPT 1.25 1.62 1.2510075752 803 ¾ CxF ADAPT 1.25 1.73 1.2510075784 803R ¾x1/2 CxF ADAPT 1.01 1.50 1.0110075754 803 1 CxF ADAPT 1.53 1.76 1.5310075796 803R 1x1/2 CxF ADAPT 1.01 1.55 1.0110075798 803R 1x¾ CxF ADAPT 1.25 1.56 1.2510075800 803R 1x1¼ CxF ADAPT 1.93 1.96 1.9310075756 803 1¼ CxF ADAPT 1.93 1.90 1.9310075786 803R 1¼x1/2 CxF ADAPT 1.75 1.79 1.7510075788 803R 1¼x1 CxF ADAPT 1.75 1.80 1.7510075790 803R 1¼x11/2 CxF ADAPT 2.20 1.98 2.2010075758 803 11/2 CxF ADAPT 2.20 2.43 2.2010075792 803R 11/2x¾ CxF ADAPT 2.09 2.03 2.0910075794 803R 11/2x1¼ CxF ADAPT 2.09 2.19 2.0910075760 803 2 CxF ADAPT 2.73 2.44 2.73
Dimensions shown in inches
Female Adapter Female Reducing Adapter
LEAD FREE BRASS FEMALE ADAPTER
Adapters
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
47
FITTINGS
Part No. Description Height Width Depth10075764 803-2 1/2x⅜ FTGxF ADAPT 0.87 1.56 0.8710075762 803-2 1/2 FTGxF ADAPT 1.02 1.71 1.0210075766 803-2 1/2x¾ FTGxF ADAPT 1.26 1.79 1.2610075768 803-2 ¾ FTGxF ADAPT 1.25 1.91 1.2510075770 803-2 ¾x1/2 FTGxF ADAPT 1.02 1.84 1.0210075772 803-2 1 FTGxF ADAPT 1.53 2.03 1.5310075804 803-2 1x1/2 FTGxF ADAPT 1.13 1.65 1.1310075774 803-2 1¼ FTGxF ADAPT 1.93 2.19 1.9310075802 803-2 1¼x1/2 FTGxF ADAPT 1.38 1.90 1.3810075776 803-2 11/2 FTGxF ADAPT 2.20 2.57 2.2010075778 803-2 2 FTGxF ADAPT 2.74 2.78 2.74
Dimensions shown in inches
Female Street Adapter Female Reducing Street Adapter
LEAD FREE BRASS FEMALE STREET ADAPTER
Adapters
Part No. Description Height Width Depth10075836 804R 1/2x⅜ CxM ADAPT 0.93 1.79 0.9310075806 804 1/2 CxM ADAPT 0.93 1.92 0.9310075838 804R 1/2x¾ CxM ADAPT 1.05 1.86 1.0510075840 804R ¾x1/2 CxM ADAPT 1.26 2.21 1.2610075808 804 ¾ CxM ADAPT 1.26 2.15 1.2610075842 804R ¾x1 CxM ADAPT 1.50 2.60 1.5010075854 804R 1x¾ CxM ADAPT 1.50 2.24 1.5010075844 804 1 CxM ADAPT 1.50 2.39 1.5010075856 804R 1x1¼ CxM ADAPT 1.71 2.44 1.7110075846 804R 1¼x1 CxM ADAPT 1.71 2.42 1.7110075810 804 1¼ CxM ADAPT 1.71 2.39 1.7110075848 804R 1¼x11/2 CxM ADAPT 1.90 2.62 1.9010075850 804R 11/2x1¼ CxM ADAPT 2.12 2.73 2.1210075812 804 11/2 CxM ADAPT 2.13 2.68 2.1310075852 804R 11/2x2 CxM ADAPT 2.59 2.82 2.5910075858 804R 2x11/2 CxM ADAPT 2.57 3.1 2.5710075814 804 2 CxM ADAPT 2.60 2.97 2.6010061982 804 21/2 CxM ADAPT 3.16 4.11 3.1610061987 804 3 CxM ADAPT 3.56 4.35 3.1610061992 804 4 CxM ADAPT 4.70 5.43 3.16
Dimensions shown in inches
Small Diameter Large Diameter
Reducing Adapter
MALE ADAPTER
Part No. Description Height Width Depth10075818 804-2 1/2x⅜ FTGxM ADAPT 0.68 1.99 0.6810075816 804-2 1/2 FTGxM ADAPT 0.84 2.23 0.8410075820 804-2 1/2x¾ FTGxM ADAPT 1.05 2.42 1.0510075824 804-2 ¾x1/2 FTGxM ADAPT 0.98 2.31 0.9810075822 804-2 ¾ FTGxM ADAPT 1.05 2.40 1.0510075832 804-2 1x¾ FTGxM ADAPT 1.32 2.55 1.3210075826 804-2 1 FTGxM ADAPT 1.31 2.72 1.3110075828 804-2 1¼ FTGxM ADAPT 1.66 2.82 1.6610075830 804-2 11/2 FTGxM ADAPT 1.90 3.27 1.9010075834 804-2 2 FTGxM ADAPT 2.37 3.46 2.37
Dimensions shown in inches
Reducing AdapterSmall Diameter
LEAD FREE BRASS MALE STREET ADAPTER
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600048
www.apollovalves.com
FITTINGSUnions
Part No. Description Height Width Depth10075872 8733-3 1/2 CxF UNION 1.25 2.14 1.2510075874 8733-3 ¾ CxF UNION 1.52 2.88 1.5210075876 8733-3 1 CxF UNION 1.94 2.88 1.9410075878 8733-3 1¼ CxF UNION 2.19 3.16 2.1910075880 8733-3 11/2 CxF UNION 2.45 3.09 2.4510075882 8733-3 2 CxF UNION 3.12 3.33 3.12
Dimensions shown in inches
LEAD FREE BRASS FEMALE UNION
Part No. Description Height Width Depth10075884 8733-4 1/2 CxM UNION 1.26 2.90 1.2610075886 8733-4 ¾ CxM UNION 1.52 3.42 1.5210075888 8733-4 1 CxM UNION 1.94 3.74 1.9410075890 8733-4 1¼ CxM UNION 2.19 3.78 2.1910075892 8733-4 11/2 CxM UNION 2.45 3.73 2.4510075894 8733-4 2 CxM UNION 3.12 4.24 3.12
Dimensions shown in inches
LEAD FREE BRASS MALE UNION
Part No. Description Height Width Depth10075860 8733 1/2 CxC UNION 1.26 2.99 1.2610075862 8733 ¾ CxC UNION 1.52 3.69 1.5210075864 8733 1 CxC UNION 1.94 3.68 1.9410075866 8733 1¼ CxC UNION 2.19 3.83 2.1910075868 8733 11/2 CxC UNION 2.45 3.95 2.4510075870 8733 2 CxC UNION 3.12 4.65 3.12
Dimensions shown in inches
LEAD FREE BRASS UNION
Note – This installation guide covers the general installation practices
for APOLLOXPRESS® fittings and valves in applications listed within.
It is the sole responsibility of the installing professional to insure
installation meets local code requirement. Failure to observe
installation instructions may result in substandard performance.
Instal
lation
Gudie
&Pre
ssing
Instr
uctio
ns
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600050
www.apollovalves.com
INSTALLATION GUIDE & PRESSING INSTRUCTIONS
SYSTEM DESCRIPTIONSmall Diameter Fittings ½” -2”APOLLOXPRESS® small diameter fittings are made from naturally lead free copper or lead free brass in the USA. EPDM O-rings are pre-installed and lubricated with ANSI/NSF 61 listed silicone oil.
Large Diameter FittingsAPOLLOXPRESS® large diameter fittings are made from naturally lead free copper in the USA. They also contain a one-piece 360 degree solid stainless steel grip ring and EPDM O-rings pre-installed and lubricated with ANSI/NSF 61 listed silicone oil.
ValvesAPOLLOXPRESS® valves are offered in lead free and non-lead free brass and bronze materials. They contain pre-installed EPDM O-rings treated with a silicone-free NSF 61 listed lubricant.
EPDM Sealing ElementEthylene-Propylene Diene Monomer or EPDM is black and shiny in appearance and has an operating temperature range of 0°F-250°F. When properly installed the EPDM seal will last as long as the copper pipe with which it is joined.
System BenefitsAPOLLOXPRESS® connections are heat and flame free, contain Leak Before Press® functionality and offer a clean and professional look.
ApplicationsAPOLLOXPRESS® fittings are ideal for commercial and residential applications and feature an EPDM sealing element making APOLLOXPRESS® the ideal solution for;• Hot and cold potable water – 200psi at 250°F pressure rating• Hydronic heating – a water mixture of ethylene, propylene, butylene and glycol up to 100% concentration• Chilled water• Compressed air – Clean, dry and oil free filtered air• Low pressure steam, 15 psi maximum• Vacuum• Gray water• Other chemicals compatible with EPDM. Please contact Elkhart Products product engineering for evaluation and approval.
LISTINGS, APPROVALS AND CODESFittings• IAPMO listed to NSF 61, NSF 372, IAPMO PS-117 and CSA TIL-MSE-13 standards• Compliant with the following plumbing codes - ICC International Plumbing Code - UPC Uniform Plumbing Code - National Standard Plumbing Code• Compliant with the following State and local requirements - Massachusetts Commonwealth of Massachusetts Product Approval Number P1-1205-57 - Illinois Department of Public Health, Plumbing Code Advisory Council - Kentucky Commonwealth of Kentucky, Office of Housing, Buildings and Construction - Minnesota Plumbing Code Advisory Council - Wisconsin Safety and Buildings Division - State of Michigan - Miami/Dade County Public School District - City of Los Angeles, California – General Approval RR# 5630 - Ford Motor Company• For the most up-to-date listing certificate please visit the IAPMO and NSF websites.• For listings, approvals and code compliances not listed here please contact Elkhart Products product engineering for further information.
ValvesAPOLLOXPRESS® valves have been designed to meet the most rigorous industry standards. Depending upon the product, numerous approvals are available including NSF 61, NSF 372, CSA, ASSE and USC . See individual product submittal sheets for specific approvals.
Description / Approvals
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
51
INSTALLATION GUIDE & PRESSING INSTRUCTIONS
HandlingAPOLLOXPRESS® fittings and valves should remain in their packaging immediately prior to installation. This ensures the fitting remains un-damaged and clean from on-site debris. Unused fittings should be kept in the original packaging with any openings sealed to ensure fitting cleanliness is maintained. Components should be free from dirt, debris and grime that may interfere with the sealing EPDM O-ring.
APOLLOXPRESS® copper, brass and bronze fittings and valves may be used with 1/2” – 1 ¼” soft copper tube and 1/2” – 4” and hard copper tube, type K, L and M and complies with ASTM B88 standards. Installing contractor shall be sure tube surface is free of imperfections and stamped print strings that will interfere with the sealing of the EPDM O-ring.
Underground InstallationsWhen permitted by state and local codes APOLLOXPRESS® fittings are approved for use in underground installations. When buried in an area with corrosive soil conditions the fitting must be protected.
ExpansionThermal expansion and contraction of installed joints can cause undue stress. Installing contractors shall compensate for thermal expansion and contraction with expansion joints or mechanical expansion compensator may be used to reduce or remove these stresses.
Freezing ConditionsAPOLLOXPRESS® fittings and valves may be installed in ambient temperatures down to 0°F. Installed tubing systems exposed to freezing conditions must be protected per state and local code requirements and good installation practice.
Tube Hangers and SupportsAPOLLOXPRESS® tube hangers and supports do not require special consideration. Tube hangers and supports should be made of a material suitable for copper tube and conform to local code requirements. Care should be taken to insure piping system is isolated from shock and vibration.
Re-Pressing a Pressed FittingIf a fitting is required to be re-pressed, reposition the crimping tool 90 degrees from the previous pressed position, then re-press.
System SizingAPOLLOXPRESS® systems should be sized and designed in accordance with standard wrot copper fitting systems. The deformation caused by the press joint is not a proven source of turbulence. Properly sized and installed systems with the proper design flow velocities will minimize the risk of erosion corrosion.
Electrical BondingThe mechanical press formed provides a continuous metal-to-metal contact between the fitting and the pipe. When properly installation APOLLOXPRESS® fittings and valves comply with section 1211.15 - Electrical Bonding and Grounding, of the Uniform Plumbing Code.
Material CompatibilityAPOLLOXPRESS® fittings and valves shall not come in contact with chemicals or solvents that may compromise the integrity of the EPDM sealing element before or after installation. Chemicals and solvents include household cleaning products, oil based paints, non-EPC approved lubricants, flux, mineral oils, adhesives, ammonia and nitrates.
Pressure TestingInstalled systems should be pressure tested in accordance with local code requirements. With Leak Before Press® functionally, un-pressed APOLLOXPRESS® joints will be easily identified. When local code requirements do not exist or refer to the manufacturer, please pressure test as follows; Water – Recommend pressure testing between 15-85psi Air – Recommend between 1/2 - 45psi but as high as 200psi is acceptable if required by project specification or local code.For safety reasons we recommend on initial pressure test no higher than 25psi. A low pressure test will safely identify any un-pressed joints.
Fittings and valves may not pass a pressure test for one of the following reasons;• The joint was never pressed → press fitting following our instruction• The tube was not fully inserted → replace• The jaw, sling, ring, chain was not properly aligned → replace• The joint may have rotated → re-press; rotate jaw, sling, ring, chain 90 degrees from 1st press preferred but not necessary.
General Installation Instructions
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600052
www.apollovalves.com
INSTALLATION GUIDE & PRESSING INSTRUCTIONS
Between APOLLOXPRESS® JointsTo prevent distortion of the pipe, fittings require a minimum distance between fittings (refer to chart below). Failure to provide this distance may result in an improper seal.
Fitting Size Minimum Spacing1/2” 0”¾” 0”1” 0”1 ¼” 1/2”1 1/2” 5⁄8”
Fitting Size Minimum Spacing2” ¾”2 1/2” 5⁄8”3” 5⁄8”4” 5⁄8”
Between an APOLLOXPRSS® Joint and Existing Solder JointThe minimum distance when making an APOLLOXPRESS® joint near a solder joint is in the table below. No residual solder, flux, or debris should be on the tubing.
Tube Dia. Minimum Distance1/2” 1 1/2”¾” 2 ¼”1” 3”1 ¼” 3 ¾”1 1/2” 4 1/2”
Tube Dia. Minimum Distance2” 6”2 1/2” 7 1/2”3” 9”4” 12”
Between an APOLLXPRESS® Joint and Existing Brazed JointThe minimum distance when making an APOLLOXRESS® joint near a brazed joint is 2 pipe diameters of the tube being pressed.
Tube Dia. Minimum Distance1/2” 4 1/2”¾” 6 ¾”1” 9”1 ¼” 11 ¼”1 1/2” 13 1/2
Tube Dia. Minimum Distance2” 18”2 1/2” 22 1/2”3” 27”4” 36”
When Soldering near an APOLLOXPRESS® JointMinimum distance is found in the table below. The installer shall take proper precautions to protect and keep cool the APOLLOXPRESS® joint using one of the following methods.• Wrap joint in a cold wet rag.• Use a spray type spot freezing product. The product should NOT come into contact with the joint.• Prefabricate the solder connection, waiting for it to cool and then make the press connection.
Tube Dia. Minimum Distance1/2” 1 1/2”¾” 2 ¼”1” 3”1 ¼” 3 ¾”1 1/2” 4 1/2”
Tube Dia. Minimum Distance2” 6”2 1/2” 7 1/2”3” 9”4” 12”
When Brazing near an APOLLOXPRESS® JointStay at least 12 inches away from the pressed connection. The installer shall take proper precautions to protect and keep cool the APOLLOXPRESS® joint using one of the following methods.• Wrap joint in a cold wet rag.• Use a spray type spot freezing product. The product should NOT come into contact with the joint.• Prefabricate the brazed connection, waiting for it to cool and then make the press connection.
Minimum Spacing
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
53
Cut the tube square using a rotary tube cutter or fine toothed steel saw.
Remove internal and external burrs at tube ends using find tooth file or commercially available de-burring tools.
1 2
INSTALLATION GUIDE & PRESSING INSTRUCTIONS
TOOLSAPOLLOXPRESS® products are tested and approved for use with multiple tool manufacturers. Please see our “Jaw Compatibility” on page 65 for specific approvals. Like other tools and equipment pressing tools and their accessories require servicing. Please follow tool manufacturer instruction.
Mark insertion depth by inserting tube into the fitting or valve with twisting motion until it meets tube stop OR tape measure and insertion depth chart.
WARNING:It is the responsibility of the end-user to follow all instructions for installing APOLLOXPRESS® press fittings. Failure to follow these instructions and safe plumbing practices may result in extensive property damage, serious injury or death.
4
Nominal Pipe Size1/2”3/4”
1”1 ¼”1 1/2”
2”2 1/2”
3”4”
Insertion Depth (in)3/4” (0.75”)
15/16” (0.94”)15/16” (0.94”)1-1/16” (1.06”)1-7/16” (1.44”)1-9/16” (1.56”)
1-7/8” (1.9”)2-1/8” (2.1”)2-1/2” (2.5”)
Inspect fitting or valve to insure bead O-ring is present, un-damaged and free from dirt and debris.
3
Pressing Instructions
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600054
www.apollovalves.com
INSTALLATION GUIDE & PRESSING INSTRUCTIONS
Insert the tube into the fitting or valve with twisting motion until it meets tube stop AND insertion depth mark. Wetting the tube, fitting or valve with clean water may reduce insertion force.
Using approved press tool and jaw of the correct size, open the jaw and place over the bead of the fitting or valve at a 90 degree angle to the tube centerline.
Press. Please refer to the specific tool manufacturer instruction.
1 2
Jaw Pressing Instructions Typically for ½” Through 2” Sizes
3
Insert the tube into the fitting or valve with twisting motion until it meets tube stop AND insertion depth mark. Wetting the tube, fitting or valve with clean water may reduce insertion force.
Using approved press tool and ring, sling, chain of the correct size, open the ring, sling or chain and place over the bead of the fitting or valve at a 90 degree angle to the tube centerline.
Press. Please refer to the specific tool manufacturer instruction.
1 2 3
Ring, Sling, Chain Pressing Instructions Typically for 2 ½” Through 4” Sizes
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
55
INSTALLATION GUIDE & PRESSING INSTRUCTIONS
Approval is granted based on laboratory testing performed by Elkhart Products Corporation (EPC) utilizing performance requirements in IAPMO PS117, proprietary standards developed by EPC, and by following the jaw, actuator, and pressing tool operating instructions. The following best practices apply as a requirement of all approvals.• Jaws require cleaning to remove copper buildup or chips. Typically, cleaning is performed dry with an abrasive pad; however, specific jaw cleaning instructions are included in the jaw manufacturers operating instructions. Jaw cleaning intervals will vary by size, material, and engineering design.• Jaws may require periodic inspections and or re-calibration; check the jaw manufacturers operating instructions for details.• Pressing tools (sometimes called press tools or guns) require periodic inspection and re-calibration. Specific recommendations vary by manufacturer and model number; consult the operating instructions provided with the pressing tool.• Jaw cleanliness, jaw inspection/re-calibration (if required), and periodic pressing tool re-calibration/inspection are the responsibility of the installer. Failure to maintain the pressing tool, jaw, or actuator may void the manufacturer’s warranty.
Note - Jaw approval testing is performed using jaws and pressing tools submitted by each jaw and pressing tool manufacturer listed below. EPC or Apollo do not conduct testing of jaw and pressing tool interchangeability.
½” to 2” APOLLOXPRESS® Valves and Copper/Low-Lead Brass Fittings:
MILWAUKEE: M18 Standard Jaws: 2 1/2” 49-16-2656 3” 49-16-2657 4” 49-16-2658 Ring Jaw 49-16-2659
NIBCO: Standard Jaws: 1/2” PC-10S ¾” PC-11S 1” PC-12S 1 ¼” PC-13S2 1 1/2” PC-14S 2” PC-15S
MILWAUKEE: M12 Compact Jaws: 1/2” 49-16-2450 ¾” 49-16-2451 1” 49-16-2452 1 ¼” 49-16-2453 M18 Standard Jaws: 1/2” 49-16-2650 ¾” 49-16-2651 1” 49-16-26522
1 ¼” 49-16-26532
1 1/2” 49-16-2654 2” 49-16-2655
Note 1: Jaws date coded prior to 2/14 could have a potential interference problem with APOLLOXPRESS 77W, 77WLF, 77V, and 77VLF press ball valves.
Note 2: Jaws are compatible with new production 77W, 77WLF, 77V, and 77VLF press ball valves identified with “M18” on the valve box label and hang tag.
REMS: Compact Jaws (Mini Tongs): 1/2” VUS 1/2” 578566 ¾” VUS ¾” 578568 1” VUS 1” 5785701
1¼” VUS 1 ¼” 578606 Standard Jaws (Tongs): 1/2” VUS 1/2” 571770 ¾” VUS ¾” 571775 1” VUS 1” 5717802 1¼” VUS 1 ¼” 5717852 11/2” VUS 1 1/2” 571790 2” VUS 2” 571795
Stanley – Virax: Copper Inserts: 1/2” 252933 ¾” 252934 1” 252935 Copper Jaws: 1/2” 253291 ¾” 253292 1” 253293 1 ¼” 2532942 1 1/2” 2532952
2” 253296
RIDGID: Compact Jaws: 1/2” 16958 1/2” 22768 ¾” 16963 ¾” 22773 1” 16978 1” 22778 1 ¼” 31228 Standard Jaws: 1/2” 76652 1/2” 21848 ¾” 76657 ¾” 21853 1” 76662 1” 21858 1 ¼” 76667 1 ¼” 21863 1 1/2” 76672 1 1/2” 21868 2” 76677 2” 21873
ROTHENBERGER: Compact Jaws: 1/2” 15031V ¾” 15032V 1” 15033V Standard Jaws: 1/2” 15222X ¾” 15223X 1” 15224X2 1 ¼” 15225X2 1 1/2” 15226X 2” 15227X
REMS: Standard Pressing Ring:2 1/2” VUSF 2 1/2” 572819 3” VUSF 3” 572820 4” VUSF 4” 572821 Adapter Tong Z5 572802
RIDGID: Standard Jaws: 2 1/2” 20543 3” 20548 4” 20553 Actuator 21878
2½” to 4” APOLLOXPRESS® LD-C Valves and Copper Fittings
Please refer to our website: www.apollovalves.com/apolloxpress for the most current Jaws Approval.
Jaw Compatibility
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600056
www.apollovalves.com
CROSS REFERENCE CHARTAPOLLOXPRESS® Valves
Apollo PartNumber Size Description NIBCO
No.
Viega Model
No.
Viega Stock Code
200 CWP BRONZE GATE VALVE, RS
30-003-01-PR 1/2200 CWP Gate,Brz, Threaded Bonnet,
Solid Disc, RS, PressPF111 n/a n/a
30-004-01-PR 3/4200 CWP Gate,Brz, Threaded Bonnet,
Solid Disc, RS, PressPF111 n/a n/a
30-005-01-PR 1200 CWP Gate,Brz, Threaded Bonnet,
Solid Disc, RS, PressPF111 n/a n/a
30-006-01-PR 1 1/4200 CWP Gate,Brz, Threaded Bonnet,
Solid Disc, RS, PressPF111 n/a n/a
30-007-01-PR 1 1/2200 CWP Gate,Brz, Threaded Bonnet,
Solid Disc, RS, PressPF111 n/a n/a
30-008-01-PR 2200 CWP Gate,Brz, Threaded Bonnet,
Solid Disc, RS, PressPF111 n/a n/a
30LF-003-01-PR 1/2200 CWP Gate, LF Brz, Threaded
Bonnet, Solid Disc, RS, Pressn/a n/a n/a
30LF-004-01-PR 3/4200 CWP Gate, LF Brz, Threaded
Bonnet, Solid Disc, RS, Pressn/a n/a n/a
30LF-005-01-PR 1200 CWP Gate, LF Brz, Threaded
Bonnet, Solid Disc, RS, Pressn/a n/a n/a
30LF-006-01-PR 1 1/4200 CWP Gate, LF Brz, Threaded
Bonnet, Solid Disc, RS, Pressn/a n/a n/a
30LF-007-01-PR 1 1/2200 CWP Gate, LF Brz, Threaded
Bonnet, Solid Disc, RS, Pressn/a n/a n/a
30LF-008-01-PR 2200 CWP Gate, LF Brz, Threaded
Bonnet, Solid Disc, RS, Pressn/a n/a n/a
200 CWP BRONZE GATE VALVE, NRS
30-033-01-PR 1/2200 CWP Gate,Brz, Threaded Bonnet,
Solid Disc, NRS, PressPF113 n/a n/a
30-034-01-PR 3/4200 CWP Gate,Brz, Threaded Bonnet,
Solid Disc, NRS, PressPF113 n/a n/a
30-035-01-PR 1200 CWP Gate,Brz, Threaded Bonnet,
Solid Disc, NRS, PressPF113 n/a n/a
30-036-01-PR 1 1/4200 CWP Gate,Brz, Threaded Bonnet,
Solid Disc, NRS, PressPF113 n/a n/a
30-037-01-PR 1 1/2200 CWP Gate,Brz, Threaded Bonnet,
Solid Disc, NRS, PressPF113 n/a n/a
30-038-01-PR 2200 CWP Gate,Brz, Threaded Bonnet,
Solid Disc, NRS, PressPF113 n/a n/a
30LF-033-01-PR 1/2200 CWP Gate, LF Brz, Threaded
Bonnet, Solid Disc, NRS, Pressn/a n/a n/a
30LF-034-01-PR 3/4200 CWP Gate, LF Brz, Threaded
Bonnet, Solid Disc, NRS, Pressn/a n/a n/a
30LF-035-01-PR 1200 CWP Gate, LF Brz, Threaded
Bonnet, Solid Disc, NRS, Pressn/a n/a n/a
30LF-036-01-PR 1 1/4200 CWP Gate, LF Brz, Threaded
Bonnet, Solid Disc, NRS, Pressn/a n/a n/a
30LF-037-01-PR 1 1/2200 CWP Gate, LF Brz, Threaded
Bonnet, Solid Disc, NRS, Pressn/a n/a n/a
30LF-038-01-PR 2200 CWP Gate, LF Brz, Threaded
Bonnet, Solid Disc, NRS, Pressn/a n/a n/a
Apollo PartNumber Size Description NIBCO
No.
Viega Model
No.
Viega Stock Code
200 CWP BRONZE GLOBE VALVE, PTFE DISC
33-133-01-PR 1/2200 CWP Globe, Brz, Threaded
Bonnet, PTFE Disc, PressPF211Y n/a n/a
33-134-01-PR 3/4200 CWP Globe, Brz, Threaded Bon-
net, PTFE Disc, PressPF211Y n/a n/a
33-135-01-PR 1200 CWP Globe, Brz, Threaded Bon-
net, PTFE Disc, PressPF211Y n/a n/a
33-136-01-PR 1 1/4200 CWP Globe, Brz, Threaded Bon-
net, PTFE Disc, PressPF211Y n/a n/a
33-137-01-PR 1 1/2200 CWP Globe, Brz, Threaded Bon-
net, PTFE Disc, PressPF211Y n/a n/a
33-138-01-PR 2200 CWP Globe, Brz, Threaded Bon-
net, PTFE Disc, PressPF211Y n/a n/a
33LF-133-01-PR 1/2200 CWP Globe, LF Brz, Threaded
Bonnet, PTFE Disc, Pressn/a n/a n/a
33LF-134-01-PR 3/4200 CWP Globe, LF Brz, Threaded
Bonnet, PTFE Disc, Pressn/a n/a n/a
33LF-135-01-PR 1200 CWP Globe, LF Brz, Threaded
Bonnet, PTFE Disc, Pressn/a n/a n/a
33LF-136-01-PR 1 1/4200 CWP Globe, LF Brz, Threaded
Bonnet, PTFE Disc, Pressn/a n/a n/a
33LF-137-01-PR 1 1/2200 CWP Globe, LF Brz, Threaded
Bonnet, PTFE Disc, Pressn/a n/a n/a
33LF-138-01-PR 2200 CWP Globe, LF Brz, Threaded
Bonnet, PTFE Disc, Pressn/a n/a n/a
WATER PRESSURE REDUCING VALVES, BRONZE
36E-103-01-PR 1/2Valve, Press Red, 36E100 Series,
Brz, Pressn/a n/a n/a
36E-104-01-PR 3/4Valve, Press Red, 36E100 Series,
Brz, Pressn/a n/a n/a
36E-105-01-PR 1Valve, Press Red, 36E100 Series,
Brz, Pressn/a n/a n/a
36ELF-103-01-PR
1/2Valve, Press Red, 36E100 Series, LF
Brz, Pressn/a n/a n/a
36ELF-104-01-PR
3/4Valve, Press Red, 36E100 Series, LF
Brz, Pressn/a n/a n/a
36ELF-105-01-PR
1Valve, Press Red, 36E100 Series, LF
Brz, Pressn/a n/a n/a
36-203-01-PR 1/2Valve, Press Red, 36200 Series, Brz,
Pressn/a n/a n/a
36-204-01-PR 3/4Valve, Press Red, 36200 Series, Brz,
Pressn/a n/a n/a
36-205-01-PR 1Valve, Press Red, 36200 Series, Brz,
Pressn/a n/a n/a
36-206-01-PR 1 1/4Valve, Press Red, 36200 Series, Brz,
Pressn/a n/a n/a
36-207-01-PR 1 1/2Valve, Press Red, 36200 Series, Brz,
Pressn/a n/a n/a
36-208-01-PR 2Valve, Press Red, 36200 Series, Brz,
Pressn/a n/a n/a
36LF-203-01-PR 1/2Valve, Press Red, 36200 Series, LF
Brz, Pressn/a n/a n/a
36LF-204-01-PR 3/4Valve, Press Red, 36200 Series, LF
Brz, Pressn/a n/a n/a
n/a = Not Available
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
57
Apollo PartNumber Size Description NIBCO
No.
Viega Model
No.
Viega Stock Code
36LF-205-01-PR 1Valve, Press Red, 36200 Series,
LF Brz, Pressn/a n/a n/a
36LF-206-01-PR 1 1/4Valve, Press Red, 36200 Series,
LF Brz, Pressn/a n/a n/a
36LF-207-01-PR 1 1/2Valve, Press Red, 36200 Series,
LF Brz, Pressn/a n/a n/a
36LF-208-01-PR 2Valve, Press Red, 36200 Series,
LF Brz, Pressn/a n/a n/a
WYE STRAINER, BRONZE
59-003-P2-PR 1/2Strainer, Y, 59 Ser, Brz, 50 mesh.
With Plug, PressPF221-A n/a n/a
59-004-P2-PR 3/4Strainer, Y, 59 Ser, Brz, 20 mesh.
With Plug, PressPF221-A n/a n/a
59-005-P2-PR 1Strainer, Y, 59 Ser, Brz, 20 mesh.
With Plug, PressPF221-A n/a n/a
59-006-P2-PR 1 1/4Strainer, Y, 59 Ser, Brz, 20 mesh.
With Plug, PressPF221-A n/a n/a
59-007-P2-PR 1 1/2Strainer, Y, 59 Ser, Brz, 20 mesh.
With Plug, PressPF221-A n/a n/a
59-008-P2-PR 2Strainer, Y, 59 Ser, Brz, 20 mesh. With
Plug, PressPF221-A n/a n/a
59LF-003-P2-PR 1/2Strainer, Y, 59 Ser, LF Brz, 50 mesh.
With Plug, Pressn/a n/a n/a
59LF-004-P2-PR 3/4Strainer, Y, 59 Ser, LF Brz, 50 mesh.
With Plug, Pressn/a n/a n/a
59LF-005-P2-PR 1Strainer, Y, 59 Ser, LF Brz, 50 mesh.
With Plug, Pressn/a n/a n/a
59LF-006-P2-PR 1 1/4Strainer, Y, 59 Ser, LF Brz, 50 mesh.
With Plug, Pressn/a n/a n/a
59LF-007-P2-PR 1 1/2Strainer, Y, 59 Ser, LF Brz, 50 mesh.
With Plug, Pressn/a n/a n/a
59LF-008-P2-PR 2Strainer, Y, 59 Ser, LF Brz, 50 mesh.
With Plug, Pressn/a n/a n/a
59-003-01-PR 1/2Strainer, Y, 59 Ser, Brz, 50 mesh.
Plain Cap, Press PF221-B n/a n/a
59-004-01-PR 3/4Strainer, Y, 59 Ser, Brz, 20 mesh.
Plain Cap, PressPF221-B n/a n/a
59-005-01-PR 1Strainer, Y, 59 Ser, Brz, 20 mesh.
Plain Cap, PressPF221-B n/a n/a
59-006-01-PR 1 1/4Strainer, Y, 59 Ser, Brz, 20 mesh.
Plain Cap, PressPF221-B n/a n/a
59-007-01-PR 1 1/2Strainer, Y, 59 Ser, Brz, 20 mesh.
Plain Cap, PressPF221-B n/a n/a
59-008-01-PR 2Strainer, Y, 59 Ser, Brz, 20 mesh.
Plain Cap, PressPF221-B n/a n/a
59LF-003-01-PR 1/2Strainer, Y, 59 Ser, Brz, 50 mesh.
Plain Cap, Pressn/a n/a n/a
59LF-004-01-PR 3/4Strainer, Y, 59 Ser, Brz, 20 mesh.
Plain Cap, Pressn/a n/a n/a
59LF-005-01-PR 1Strainer, Y, 59 Ser, Brz, 20 mesh.
Plain Cap, Pressn/a n/a n/a
59LF-006-01-PR 1 1/4Strainer, Y, 59 Ser, Brz, 20 mesh.
Plain Cap, Pressn/a n/a n/a
59LF-007-01-PR 1 1/2Strainer, Y, 59 Ser, Brz, 20 mesh.
Plain Cap, Pressn/a n/a n/a
59LF-008-01-PR 2Strainer, Y, 59 Ser, Brz, 20 mesh.
Plain Cap, Pressn/a n/a n/a
Apollo PartNumber Size Description NIBCO
No.
Viega Model
No.
Viega Stock Code
200 CWP BRONZE SWING CHECK, PTFE DISC
61Y-203-T1-PR 1/2200 CWP Swing Check, Y-Pattern,
PTFE Disc, PressPF413Y n/a n/a
61Y-204-T1-PR 3/4200 CWP Swing Check, Y-Pattern,
PTFE Disc, PressPF413Y n/a n/a
61Y-205-T1-PR 1200 CWP Swing Check, Y-Pattern,
PTFE Disc, PressPF413Y n/a n/a
61Y-206-T1-PR 1 1/4200 CWP Swing Check, Y-Pattern,
PTFE Disc, PressPF413Y n/a n/a
61Y-207-T1-PR 1 1/2200 CWP Swing Check, Y-Pattern,
PTFE Disc, PressPF413Y n/a n/a
61Y-208-T1-PR 2200 CWP Swing Check, Y-Pattern,
PTFE Disc, PressPF413Y n/a n/a
61YLF-203-T1-PR
1/2200 CWP Swing Check, LF Brz,
Y-Pattern, PTFE Disc, Pressn/a n/a n/a
61YLF-204-T1-PR
3/4200 CWP Swing Check, LF Brz,
Y-Pattern, PTFE Disc, Pressn/a n/a n/a
61YLF-205-T1-PR
1200 CWP Swing Check, LF Brz,
Y-Pattern, PTFE Disc, Pressn/a n/a n/a
61YLF-206-T1-PR
1 1/4200 CWP Swing Check, LF Brz,
Y-Pattern, PTFE Disc, Pressn/a n/a n/a
61YLF-207-T1-PR
1 1/2200 CWP Swing Check, LF Brz,
Y-Pattern, PTFE Disc, Pressn/a n/a n/a
61YLF-208-T1-PR
2200 CWP Swing Check, LF Brz,
Y-Pattern, PTFE Disc, Pressn/a n/a n/a
IN-LINE CHECK VALVE, BRONZE, BALL CONE
61-103-01-PR 1/2Vlv, Ball Cone Chk, 61-100 Ser,
Brz, Pressn/a n/a n/a
61-104-01-PR 3/4Vlv, Ball Cone Chk, 61-100 Ser,
Brz, Pressn/a n/a n/a
61-105-01-PR 1Vlv, Ball Cone Chk, 61-100 Ser,
Brz, Pressn/a n/a n/a
61-106-01-PR 1 1/4Vlv, Ball Cone Chk, 61-100 Ser,
Brz, Pressn/a n/a n/a
61-107-01-PR 1 1/2Vlv, Ball Cone Chk, 61-100 Ser,
Brz, Pressn/a n/a n/a
61-108-01-PR 2Vlv, Ball Cone Chk, 61-100 Ser,
Brz, Pressn/a n/a n/a
61LF-103-01-PR 1/2Vlv, Ball Cone Chk, 61-100 Ser,
LF Brz, Pressn/a 2974ZL 79035
61LF-104-01-PR 3/4Vlv, Ball Cone Chk, 61-100 Ser,
LF Brz, Pressn/a 2974ZL 79040
61LF-105-01-PR 1Vlv, Ball Cone Chk, 61-100 Ser,
LF Brz, Pressn/a 2974ZL 79045
61LF-106-01-PR 1 1/4Vlv, Ball Cone Chk, 61-100 Ser,
LF Brz, Pressn/a 2974ZL 79050
61LF-107-01-PR 1 1/2Vlv, Ball Cone Chk, 61-100 Ser,
LF Brz, Pressn/a 2974ZL 79055
61LF-108-01-PR 2Vlv, Ball Cone Chk, 61-100 Ser,
LF Brz, Pressn/a 2974ZL 79060
BALL VALVES77W-103-01 1/2 Ball Valve, Brz, Press End PC585-70 n/a n/a
77W-104-01 3/4 Ball Valve, Brz, Press End PC585-70 n/a n/a
77W-105-01 1 Ball Valve, Brz, Press End PC585-70 n/a n/a
CROSS REFERENCE CHARTAPOLLOXPRESS® Valves
n/a = Not Available
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600058
www.apollovalves.com
Apollo PartNumber Size Description NIBCO
No.
Viega Model
No.
Viega Stock Code
77W-106-01 1 1/4 Ball Valve, Brz, Press End PC585-70 n/a n/a
77W-107-01 1 1/2 Ball Valve, Brz, Press End PC585-70 n/a n/a
77W-108-01 2 Ball Valve, Brz, Press End PC585-70 n/a n/a
77W-143-01 1/2Ball Valve, Brz, SS Ball & Stem,
Press EndPC585-70-66
n/a n/a
77W-144-01 3/4Ball Valve, Brz, SS Ball & Stem,
Press EndPC585-70-66
n/a n/a
77W-145-01 1Ball Valve, Brz, SS Ball & Stem,
Press EndPC585-70-66
n/a n/a
77W-146-01 1 1/4Ball Valve, Brz, SS Ball & Stem,
Press EndPC585-70-66
n/a n/a
77W-147-01 1 1/2Ball Valve, Brz, SS Ball & Stem,
Press EndPC585-70-66
n/a n/a
77W-148-01 2Ball Valve, Brz, SS Ball & Stem,
Press EndPC585-70-66
n/a n/a
77W-103-HC 1/2Ball Valve, Brz, Press x Hose Cap
& ChainPC585-70-HC
n/a n/a
77W-104-HC 3/4Ball Valve, Brz, Press x Hose Cap
& ChainPC585-70-HC
n/a n/a
77W-143-HC 1/2Ball Valve, Brz, SS Ball & Stem, Press
x Hose Cap & ChainPC585-70-
66-HCn/a n/a
77W-144-HC 3/4Ball Valve, Brz, SS Ball & Stem, Press
x Hose Cap & ChainPC585-70-
66-HCn/a n/a
77W-103-11 1/2Ball Valve, Brz, Press End, Therma-
Seal™ HandlePC585-70-NS
n/a n/a
77W-104-11 3/4Ball Valve, Brz, Press End, Therma-
Seal™ HandlePC585-70-NS
n/a n/a
77W-105-11 1Ball Valve, Brz, Press End, Therma-
Seal™ HandlePC585-70-NS
n/a n/a
77W-106-11 1 1/4Ball Valve, Brz, Press End, Therma-
Seal™ HandlePC585-70-NS
n/a n/a
77W-107-11 1 1/2Ball Valve, Brz, Press End, Therma-
Seal™ HandlePC585-70-NS
n/a n/a
77W-108-11 2Ball Valve, Brz, Press End, Therma-
Seal™ HandlePC585-70-NS
n/a n/a
77W-143-11 1/2Ball Valve, Brz, SS Trim, Press,
Therma-Seal™ HandlePC585-70-
66-NSn/a n/a
77W-144-11 3/4Ball Valve, Brz, SS Trim, Press,
Therma-Seal™ HandlePC585-70-
66-NSn/a n/a
77W-145-11 1Ball Valve, Brz, SS Trim, Press,
Therma-Seal™ HandlePC585-70-
66-NSn/a n/a
77W-146-11 1 1/4Ball Valve, Brz, SS Trim, Press,
Therma-Seal™ HandlePC585-70-
66-NSn/a n/a
77W-147-11 1 1/2Ball Valve, Brz, SS Trim, Press,
Therma-Seal™ HandlePC585-70-
66-NSn/a n/a
77W-148-11 2Ball Valve, Brz, SS Trim, Press,
Therma-Seal™ HandlePC585-70-
66-NSn/a n/a
77WLF-103-01 1/2 Ball Valve, LF Brz, Press EndPC585-80-LF
n/a n/a
77WLF-104-01 3/4 Ball Valve, LF Brz, Press EndPC585-80-LF
n/a n/a
77WLF-105-01 1 Ball Valve, LF Brz, Press EndnPC585-80-LFa
n/a n/a
77WLF-106-01 1 1/4 Ball Valve, LF Brz, Press EndPC585-80-LF
n/a n/a
77WLF-107-01 1 1/2 Ball Valve, LF Brz, Press EndPC585-80-LF
2970.1ZL 79115
Apollo PartNumber Size Description NIBCO
No.
Viega Model
No.
Viega Stock Code
77WLF-108-01 2 Ball Valve, LF Brz, Press EndPC585-80-LF
2970.1ZL 79120
77WLF-143-01 1/2Ball Valve, LF Brz, SS Ball & Stem,
Press EndPC585-66-LF
n/a n/a
77WLF-144-01 3/4Ball Valve, LF Brz, SS Ball & Stem,
Press EndPC585-66-LF
n/a n/a
77WLF-145-01 1Ball Valve, LF Brz, SS Ball & Stem,
Press EndPC585-66-LF
n/a n/a
77WLF-146-01 1 1/4Ball Valve, LF Brz, SS Ball & Stem,
Press EndPC585-66-LF
n/a n/a
77WLF-147-01 1 1/2Ball Valve, LF Brz, SS Ball & Stem,
Press EndPC585-66-LF
2970.3ZL 79840
77WLF-148-01 2Ball Valve, LF Brz, SS Ball & Stem,
Press EndPC585-66-LF
2970.3ZL 79845
77WLF-103-HC 1/2Ball Valve, LF Brz, Press x Hose Cap
& ChainPC585-
80-LF-HC2971.5ZL 79990
77WLF-104-HC 3/4Ball Valve, LF Brz, Press x Hose Cap
& ChainPC585-
80-LF-HC2971.5ZL 79995
77WLF-103-11 1/2Ball Valve, LF Brz, Press End, Therma-
Seal™ HandlePC585-NS-LF
n/a n/a
77WLF-104-11 3/4Ball Valve, LF Brz, Press End, Therma-
Seal™ HandlePC585-NS-LF
n/a n/a
77WLF-105-11 1Ball Valve, LF Brz, Press End, Therma-
Seal™ HandlePC585-NS-LF
n/a n/a
77WLF-106-11 1 1/4Ball Valve, LF Brz, Press End, Therma-
Seal™ HandlePC585-NS-LF
n/a n/a
77WLF-107-11 1 1/2Ball Valve, LF Brz, Press End, Therma-
Seal™ HandlePC585-NS-LF
n/a n/a
77WLF-108-11 2Ball Valve, LF Brz, Press End, Therma-
Seal™ HandlePC585-NS-LF
n/a n/a
77V-103-01 1/2 Press End, Forged Brass Ball Valve, RPTFE Seats, Chrome Plated Ball,BRS Stem
PC585-70
2973 24000
77V-104-01 3/4Press End, Forged Brass Ball Valve, RPTFE
Seats, Chrome Plated Ball,BRS StemPC585-
702973 24005
77V-105-01 1Press End, Forged Brass Ball Valve, RPTFE
Seats, Chrome Plated Ball,BRS StemPC585-
702973 24010
77V-106-01 1-1/4Press End, Forged Brass Ball Valve, RPTFE
Seats, Chrome Plated Ball,BRS StemPC585-
702973 24015
77V-107-01 1-1/2Press End, Forged Brass Ball Valve, RPTFE
Seats, Chrome Plated Ball,BRS StemPC585-
702973 24020
77V-108-01 2Press End, Forged Brass Ball Valve, RPTFE
Seats, Chrome Plated Ball,BRS StemPC585-
702973 24025
77V-109-01 2-1/2Press End, Forged Brass Ball Valve, RPTFE
Seats, Chrome Plated Ball,BRS Stemn/a n/a n/a
77V-100-01 3Press End, Forged Brass Ball Valve, RPTFE
Seats, Chrome Plated Ball,BRS Stemn/a n/a n/a
77V-10A-01 4Press End, Forged Brass Ball Valve, RPTFE
Seats, Chrome Plated Ball,BRS Stemn/a n/a n/a
77V-143-01 1/2Press End, Forged Brass Ball Valve,
RPTFE Seats, SS Ball & StemPC585-70-66
n/a n/a
77V-144-01 3/4Press End, Forged Brass Ball Valve,
RPTFE Seats, SS Ball & StemPC585-70-66
n/a n/a
77V-145-01 1Press End, Forged Brass Ball Valve,
RPTFE Seats, SS Ball & StemPC585-70-66
n/a n/a
77V-146-01 1-1/4Press End, Forged Brass Ball Valve,
RPTFE Seats, SS Ball & StemPC585-70-66
n/a n/a
CROSS REFERENCE CHARTAPOLLOXPRESS® Valves
n/a = Not Available
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
59
CROSS REFERENCE CHARTAPOLLOXPRESS® Valves
Apollo PartNumber Size Description NIBCO
No.
Viega Model
No.
Viega Stock Code
77V-147-01 1-1/2Press End, Forged Brass Ball Valve,
RPTFE Seats, SS Ball & StemPC585-70-66
n/a n/a
77V-148-01 2Press End, Forged Brass Ball Valve,
RPTFE Seats, SS Ball & StemPC585-70-66
n/a n/a
77V-149-01 2-1/2Press End, Forged Brass Ball Valve,
RPTFE Seats, SS Ball & Stemn/a n/a n/a
77V-140-01 3Press End, Forged Brass Ball Valve,
RPTFE Seats, SS Ball & Stemn/a n/a n/a
77V-14A-01 4Press End, Forged Brass Ball Valve,
RPTFE Seats, SS Ball & Stemn/a n/a n/a
77VLF-103-01 1/2Press End, Lead Free Forged Brass Ball Valve,
RPTFE Seats, Plated LF Ball & LF BRS StemPC585-80-LF
n/a n/a
77VLF-104-01 3/4Press End, Lead Free Forged Brass Ball Valve,
RPTFE Seats, Plated LF Ball & LF BRS StemPC585-80-LF
n/a n/a
77VLF-105-01 1Press End, Lead Free Forged Brass Ball Valve,
RPTFE Seats, Plated LF Ball & LF BRS StemPC585-80-LF
n/a n/a
77VLF-106-01 1-1/4Press End, Lead Free Forged Brass Ball Valve,
RPTFE Seats, Plated LF Ball & LF BRS StemPC585-80-LF
n/a n/a
77VLF-107-01 1-1/2Press End, Lead Free Forged Brass Ball Valve,
RPTFE Seats, Plated LF Ball & LF BRS StemPC585-80-LF
2970.1ZL 79115
77VLF-108-01 2Press End, Lead Free Forged Brass Ball Valve,
RPTFE Seats, Plated LF Ball & LF BRS StemPC585-80-LF
2970.1ZL 79120
77VLF-109-01 2-1/2Press End, Lead Free Forged Brass Ball
Valve, RPTFE Seats, SS Ball & Stemn/a n/a n/a
77VLF-100-01 3Press End, Lead Free Forged Brass Ball
Valve, RPTFE Seats, SS Ball & Stemn/a n/a n/a
77VLF-14A-01 4Press End, Lead Free Forged Brass Ball
Valve, RPTFE Seats, SS Ball & Stemn/a n/a n/a
77VLF-143-01 1/2Press End, Lead Free Forged Brass Ball
Valve, RPTFE Seats, SS Ball & StemPC585-66-LF
n/a n/a
77VLF-144-01 3/4Press End, Lead Free Forged Brass Ball
Valve, RPTFE Seats, SS Ball & StemPC585-66-LF
n/a n/a
77VLF-145-01 1Press End, Lead Free Forged Brass Ball
Valve, RPTFE Seats, SS Ball & StemPC585-66-LF
n/a n/a
77VLF-146-01 1-1/4Press End, Lead Free Forged Brass Ball
Valve, RPTFE Seats, SS Ball & StemPC585-66-LF
n/a n/a
77VLF-147-01 1-1/2Press End, Lead Free Forged Brass Ball
Valve, RPTFE Seats, SS Ball & StemPC585-66-LF
2970.3ZL 79840
77VLF-148-01 2Press End, Lead Free Forged Brass Ball
Valve, RPTFE Seats, SS Ball & StemPC585-66-LF
2970.3ZL 79845
77VLF-149-01 2-1/2Press End, Lead Free Forged Brass Ball
Valve, RPTFE Seats, SS Ball & Stemn/a n/a n/a
77VLF-140-01 3Press End, Lead Free Forged Brass Ball
Valve, RPTFE Seats, SS Ball & Stemn/a n/a n/a
77VLF-14A-01 4Press End, Lead Free Forged Brass Ball
Valve, RPTFE Seats, SS Ball & Stemn/a n/a n/a
Apollo PartNumber Size Description NIBCO
No.
Viega Model
No.
Viega Stock Code
BACKFLOW PREVENTERS, RPZ, BRONZE4ALF-203-
T2F-PR 1/2 RP4ALF, LF Brz, BV, SAE Test Cock, Press n/a n/a n/a
4ALF-204-T2F-PR 3/4 RP4ALF, LF Brz, BV, SAE Test Cock,
Press n/a n/a n/a
4ALF-205-T2F-PR 1 RP4ALF, LF Brz, BV, SAE Test Cock,
Press n/a n/a n/a
4ALF-206-T2-PR 1 1/4 RP4ALF, LF Brz, with BV, Press n/a n/a n/a
4ALF-207-T2-PR 1 1/2 RP4ALF, LF Brz, with BV, Press n/a n/a n/a
4ALF-208-T2-PR 2 RP4ALF, LF Brz, with BV, Press n/a n/a n/a
n/a = Not Available
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600060
www.apollovalves.com
CROSS REFERENCE CHARTFittings
XPress Product Number Description Viega Cross NIBCO cross
10075754 803 1 CxF Low Lead Brass Female Adapter 79330 902525
10075756 803 1¼ CxF Low Lead Brass Female Adapter 79350 9025550
10075758 803 11/2 CxF Low Lead Brass Female Adapter 79365 902590
10075760 803 2 CxF Low Lead Brass Female Adapter 79370 902615
10075750 803 1/2 CxF Brass Female Adapter 77892 n/a
10075752 803 ¾ CxF Brass Female Adapter 77907 n/a
10075754 803 1 CxF Brass Female Adapter 77917 n/a
10075756 803 1¼ CxF Brass Female Adapter 77932 n/a
10075758 803 11/2 CxF Brass Female Adapter 77947 n/a
10075760 803 2 CxF Brass Female Adapter 77952 n/a
10075780803R 1/2 x 3/8 CxF Low Lead Brass
Female Reducing Adapter79295 9024800
10075782803R 1/2 x ¾ CxF Low Lead Brass
Female Reducing Adapter79305 902475
10075784803R ¾ x 1/2 CxF Low Lead Brass
Female Reducing Adapter79310 9025100
10075796803R 1 x 1/2 CxF Low Lead Brass
Female Reducing Adapter79320 9025370
10075798803R 1 x ¾ CxF Low Lead Brass
Female Reducing Adapter79325 902540
10075800803R 1 x 1¼ CxF Low Lead Brass
Female Reducing Adapter79335 9025350
10075786803R 1¼ x 1/2 CxF Low Lead Brass
Female Reducing Adapter79340 n/a
10075788803R 1¼ x 1 CxF Low Lead Brass Female
Reducing Adapter79345 902556
10075790803R 1¼ x 11/2 CxF Low Lead Brass
Female Reducing Adapter79355 9025650
10075792803R 11/2 x ¾ CxF Low Lead Brass
Female Reducing Adaptern/a 9025905
10075794803R 11/2 x 1¼ CxF Low Lead Brass
Female Reducing Adapter79360 902591
10075762803-2 1/2 FTGxF Low Lead Brass
Female Street Adapter 79430 n/a
10075768803-2 ¾ FTGxF Low Lead Brass
Female Street Adapter 79445 n/a
10075772803-2 1 FTGxF Low Lead Brass
Female Street Adapter 79450 n/a
10075774803-2 1¼ FTGxF Low Lead Brass
Female Street Adapter 79465 n/a
10075776803-2 11/2 FTGxF Low Lead Brass
Female Street Adapter 79470 n/a
10075778803-2 2 FTGxF Low Lead Brass
Female Street Adapter 79475 n/a
10075762 803-2 1/2 FTGxF Brass Female Street Adapter 78007 n/a
10075768 803-2 ¾ FTGxF Brass Female Street Adapter 78022 n/a
10075772 803-2 1 FTGxF Brass Female Street Adapter 78027 n/a
10075774 803-2 1¼ FTGxF Brass Female Street Adapter 78032 n/a
10075776 803-2 11/2 FTGxF Brass Female Street Adapter 78037 n/a
10075778 803-2 2 FTGxF Brass Female Street Adapter 78042 n/a
10075764803-2 1/2 x 3/8 FTGxF Low Lead Brass
Female Reducing Street Adapter 79425 n/a
10075766803-2 1/2 x ¾ FTGxF Low Lead Brass Female
Reducing Street Adapter 79435 n/a
10075770803-2 ¾ x 1/2 FTGxF Low Lead Brass
Female Reducing Street Adapter 79440 n/a
10075500 800 1/2 CxC Copper Coupling with Stop 78047 90011010075502 800 ¾ CxC Copper Coupling with Stop 78052 9001250
10075504 800 1 CxC Copper Coupling with Stop 78057 900145
10075506 800 1¼ CxC Copper Coupling with Stop 78062 9001700
10075508 800 11/2 CxC Copper Coupling with Stop 78067 9002000
10075510 800 2 CxC Copper Coupling with Stop 78072 9002350
10061947 800 21/2 CxC Copper Coupling with Stop 20728 900265
10061952 800 3 CxC Copper Coupling with Stop 20733 900305
10061957 800 4 CxC Copper Coupling with Stop 20738 900385
10061932 801 21/2 CxC Copper Coupling without Stop 20743 902070
10061937 801 3 CxC Copper Coupling without Stop 20748 902075
10061942 801 4 CxC Copper Coupling without Stop 20753 902085
10075513 801 1/2 CXC Copper Coupling without Stop 78172 902030
10075515 801 ¾ CXC Copper Coupling without Stop 78177 902040
10075517 801 1 CXC Copper Coupling without Stop 78182 9020500
10075521 801 1¼ CXC Copper Coupling without Stop 78187 902055
10075523 801 11/2 CXC Copper Coupling without Stop 78192 902060
10075527 801 2 CXC Copper Coupling without Stop 78197 9020650
10075030801 1/2 CXC Copper Coupling without
Stop - Extended79005 n/a
10075032801 ¾ CXC Copper Coupling without
Stop - Extended79010 n/a
10075034801 1 CXC Copper Coupling without
Stop - Extended79015 n/a
10075900 801R ¾ x 1/2 CxC Copper Reducer Coupling 78147 900130
10075144 801R 1 x 1/2 CxC Copper Reducer Coupling 15603 9001550
10075898 801R 1 x ¾ CxC Copper Reducer Coupling 78152 9001500
10066073 801R 1¼ x 1/2 CxC Copper Reducer Coupling
10066001 801R 1¼ x ¾ CxC Copper Reducer Coupling 15593 9001800
10075896 801R 1¼ x 1 CxC Copper Reducer Coupling 78157 900175
10066380 801R 11/2 x 1/2 CxC Copper Reducer Coupling
10066381 801R 11/2 x ¾ CxC Copper Reducer Coupling 18473 9002150
10066003 801R 11/2 x 1 CxC Copper Reducer Coupling 15588 900210
10075128 801R 11/2 x 1¼ CxC Copper Reducer Coupling 78162 9002050
10066082 801R 2 x 1/2 CxC Copper Reducer Coupling
10066398 801R 2 x ¾ CxC Copper Reducer Coupling 18468 9002550
10066005 801R 2 x 1 CxC Copper Reducer Coupling 15608 9002500
10066072 801R 2 x 1¼ CxC Copper Reducer Coupling 22328 9002450
10075130 801R 2 x 11/2 CxC Copper Reducer Coupling 78167 900240
10066440 801R 21/2 x 1 CxC Copper Reducer Coupling 20685 900285
10066441 801R 21/2 x 1¼ CxC Copper Reducer Coupling 20690 900280
10066442 801R 21/2 x 11/2 CxC Copper Reducer Coupling 20695 900275
10066074 801R 21/2 x 2 CxC Copper Reducer Coupling 20700 900270
10066444 801R 3 x ¾ CxC Copper Reducer Coupling n/a n/a
10066445 801R 3 x 11/2 CxC Copper Reducer Coupling 20705 900320
10066446 801R 3 x 2 CxC Copper Reducer Coupling 20710 900315
10066076 801R 3 x 21/2 CxC Copper Reducer Coupling 20715 900310
10066447 801R 4 x 2 CxC Copper Reducer Coupling 20720 900405
10066151 801R 4 x 21/2 CxC Copper Reducer Coupling 20725 900400
10066152 801R 4 x 3 CxC Copper Reducer Coupling 20730 900395
10075750 803 1/2 CxF Low Lead Brass Female Adapter 79300 902465
10075752 803 ¾ CxF Low Lead Brass Female Adapter 79315 902495
XPress Product Number Description Viega Cross NIBCO cross
n/a = Not Available
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
61
XPress Product Number Description Viega Cross NIBCO cross
10075804803-2 1 x 1/2 FTGxF Low Lead Brass Female Reducing Street Adapter
79455 n/a
10075802803-2 1¼ x 1/2 FTGxF Low Lead Brass
Female Reducing Street Adapter 79460 n/a
10075806 804 1/2 CxM Low Lead Brass Male Adapter 79215 903060
10075808 804 ¾ CxM Low Lead Brass Male Adapter 79230 9030950
10075844 804 1 CxM Low Lead Brass Male Adapter 79245 9031350
10075810 804 1¼ CxM Low Lead Brass Male Adapter 79260 9031700
10075812 804 11/2 CxM Low Lead Brass Male Adapter 79275 9032000
10075814 804 2 CxM Low Lead Brass Male Adapter 79290 903230
10075806 804 1/2 CxM Brass Male Adapter 77817 n/a
10075808 804 ¾ CxM Brass Male Adapter 77832 n/a
10075844 804 1 CxM Brass Male Adapter 77842 n/a
10075810 804 1¼ CxM Brass Male Adapter 77857 n/a
10075812 804 11/2 CxM Brass Male Adapter 77872 n/a
10075814 804 2 CxM Brass Male Adapter 77877 n/a10061982 804 21/2 CxM Copper Male Adapter 20823 903265
10061987 804 3 CxM Copper Male Adapter 20828 90327010061992 804 4 CxM Copper Male Adapter 20838 903275
10075836804R 1/2 x 3/8 CxM Low Lead Brass
Male Reducing Adapter79210 9030800
10075838804R 1/2 x ¾ CxM Low Lead Brass
Male Reducing Adapter79220 903075
10075840804R ¾ x 1/2 CxM Low Lead Brass
Male Reducing Adapter79225 903120
10075842804R ¾ x 1 CxM Low Lead Brass
Male Reducing Adapter79235 n/a
10075854804R 1 x ¾ CxM Low Lead Brass
Male Reducing Adapter79240 903155
10075856804R 1 x 1¼ CxM Low Lead Brass
Male Reducing Adapter79250 903150
10075846804R 1¼ x 1 CxM Low Lead Brass
Male Reducing Adapter79255 903185
10075848804R 1¼ x 11/2 CxM Low Lead Brass
Male Reducing Adapter79265 903180
10075850804R 11/2 x 1¼ CxM Low Lead Brass
Male Reducing Adapter79270 903210
10075852804R 11/2 x 2 CxM Low Lead Brass
Male Reducing Adapter79280 n/a
10075858804R 2 x 11/2 CxM Low Lead Brass
Male Reducing Adapter79285 n/a
10075816804-2 1/2 FTGxM Low Lead Brass
Male Street Adapter 79380 n/a
10075822804-2 ¾ FTGxM Low Lead Brass
Male Street Adapter 79395 n/a
10075826804-2 1 FTGxM Low Lead Brass
Male Street Adapter 79405 n/a
10075828804-2 1¼ FTGxM Low Lead Brass
Male Street Adapter 79410 n/a
10075830804-2 11/2 FTGxM Low Lead Brass
Male Street Adapter 79415 n/a
10075834804-2 2 FTGxM Low Lead Brass
Male Street Adapter 79420 n/a
10075816 804-2 1/2 FTGxM Brass Male Street Adapter 77962 n/a
10075822 804-2 ¾ FTGxM Brass Male Street Adapter 77977 n/a
10075826 804-2 1 FTGxM Brass Male Street Adapter 77982 n/a
CROSS REFERENCE CHARTFittings
XPress Product Number Description Viega Cross NIBCO cross
10075828 804-2 1¼ FTGxM Brass Male Street Adapter 77987 n/a
10075830 804-2 11/2 FTGxM Brass Male Street Adapter 77992 n/a
10075834 804-2 2 FTGxM Brass Male Street Adapter 77997 n/a
10075818804-2 1/2 x 3/8 FTGxM Low Lead Brass
Male Reducing Street Adapter 79375 n/a
10075820804-2 1/2 x ¾ FTGxM Low Lead Brass
Male Reducing Street Adapter 79385 n/a
10075824804-2 ¾ x 1/2 FTGxM Low Lead Brass
Male Reducing Street Adapter 79390 n/a
10075832804-2 1 x ¾ FTGxM Low Lead Brass
Male Reducing Street Adapter 79400 n/a
10075060 806 1/2 CxC Copper 45 Elbow 77607 904280
10075062 806 ¾ CxC Copper 45 Elbow 77612 904290
10075064 806 1 CxC Copper 45 Elbow 77617 904300
10075090 806 1¼ CxC Copper 45 Elbow 77622 904310
10075092 806 11/2 CxC Copper 45 Elbow 77627 9043200
10075094 806 2 CxC Copper 45 Elbow 77632 904330
10062052 806 21/2 CxC Copper 45 Elbow 20653 904340
10062057 806 3 CxC Copper 45 Elbow 20658 904350
10062062 806 4 CxC Copper 45 Elbow 20663 904370
10075054 806-2 1/2 FTGxC Copper 45 Street Elbow 77637 904620
10075056 806-2 ¾ FTGxC Copper 45 Street Elbow 77642 904630
10075058 806-2 1 FTGxC Copper 45 Street Elbow 77647 94640
10075084 806-2 1¼ FTGxC Copper 45 Street Elbow 77652 904650
10075086 806-2 11/2 FTGxC Copper 45 Street Elbow 77657 904660
10075088 806-2 2 FTGxC Copper 45 Street Elbow 77662 904670
10062037 806-2 21/2 FTGxC Copper 45 Street Elbow 20668 904680
10062042 806-2 3 FTGxC Copper 45 Street Elbow 20673 904690
10062047 806-2 4 FTGxC Copper 45 Street Elbow 20678 904700
10075554 807 1/2 CxC Copper 90 Elbow 77317 905545
10075556 807 ¾ CxC Copper 90 Elbow 77322 905560
10075052 807 1 CxC Copper 90 Elbow 77327 905575
10075078 807 1¼ CxC Copper 90 Elbow 77332 905595
10075080 807 11/2 CxC Copper 90 Elbow 77337 905615
10075082 807 2 CxC Copper 90 Elbow 77342 905640
10062021 807-C 21/2 CxC Copper Close Turn 90 Elbow n/a 905665
10062027 807-C 3 CxC Copper Close Turn 90 Elbow n/a 905690
10062032 807-C 4 CxC Copper Close Turn 90 Elbow n/a 905720
10062066 807-L 21/2 CxC Copper Long Turn 90 Elbow 20623 907905
10062067 807-L 3 CxC Copper Long Turn 90 Elbow 20628 907910
10062069 807-L 4 CxC Copper Long Turn 90 Elbow 20633 907920
10066101 807 ¾ x 1/2 CxC Copper 90 Reducing Elbow 77325 9055650
10066099 807 1 x 1/2 CxC Copper 90 Reducing Elbow n/a n/a
10066083 807 1 x ¾ CxC Copper 90 Reducing Elbow 77330 n/a
10066460 807 3 x 2 CxC Copper 90 Reducing Elbow n/a n/a
10066141 807 3 x 21/2 CxC Copper 90 Reducing Elbow n/a n/a
10075566 807-2 1/2 FTGxC Copper 90 Street Elbow 77347 905910
10075568 807-2 ¾ FTGxC Copper 90 Street Elbow 77352 905915
10075046 807-2 1 FTGxC Copper 90 Street Elbow 77357 905920
10075072 807-2 1¼ FTGxC Copper 90 Street Elbow 77362 9059250
10075074 807-2 11/2 FTGxC Copper 90 Street Elbow 77367 9059300
10075076 807-2 2 FTGxC Copper 90 Street Elbow 77372 9059350
n/a = Not Available
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600062
www.apollovalves.com
CROSS REFERENCE CHARTFittings
XPress Product Number Description Viega Cross NIBCO cross
10075578 811 1/2 CxCxC Copper Tee 77377 909720
10075580 811 ¾ CxCxC Copper Tee 77387 909840
10075582 811 1 CxCxC Copper Tee 77412 909930
10075096 811 1¼ CxCxC Copper Tee 77442 910005
10075098 811 11/2 CxCxC Copper Tee 77457 910115
10075100 811 2 CxCxC Copper Tee 77477 910260
10057518 811 21/2 CxCxC Copper Tee 20683 910445
10062072 811 3 CxCxC Copper Tee 20693 910660
10062077 811 4 CxCxC Copper Tee 20708 911215
10066590 811R ¾ x 1/2 x 1/2 CxCxC Copper Reducing Tee 77392 909890
10066039 811R ¾ x 1/2 x ¾ CxCxC Copper Reducing Tee 77397 909885
10075906 811R ¾ x ¾ x 1/2 CxCxC Copper Reducing Tee 77402 909855
10066430 811R ¾ x ¾ x 1/2 CxCxC Copper Reducing Tee 77402 909855
10066591 811R 1 x 1/2 x 1/2 CxCxC Copper Reducing Tee n/a n/a
10066592 811R 1 x 1/2 x ¾ CxCxC Copper Reducing Tee 22263 n/a
10066066 811R 1 x 1/2 x 1 CxCxC Copper Reducing Tee 94767 9099900
10066593 811R 1 x ¾ x 1/2 CxCxC Copper Reducing Tee 77417 909980
10066594 811R 1 x ¾ x ¾ CxCxC Copper Reducing Tee 77422 909975
10066040 811R 1 x ¾ x 1 CxCxC Copper Reducing Tee 77427 9099700
10066102 811R 1 x ¾ x 1¼ CxCxC Copper Reducing Tee n/a n/a
10075904 811R 1 x 1 x 1/2 CxCxC Copper Reducing Tee 77432 909955
10066431 811R 1 x 1 x 1/2 CxCxC Copper Reducing Tee 77432 909955
10075902 811R 1 x 1 x ¾ CxCxC Copper Reducing Tee 77437 909945
10066432 811R 1 x 1 x ¾ CxCxC Copper Reducing Tee 77437 909945
10066049 811R 1¼ x 1/2 x 1/2 CxCxC Copper Reducing Tee n/a n/a
10066080 811R 1¼ x 1/2 x 1 CxCxC Copper Reducing Tee n/a n/a
10066392 811R 1¼ x 1/2 x 1¼ CxCxC Copper Reducing Tee 22253 n/a
10066051 811R 1¼ x ¾ x 1/2 CxCxC Copper Reducing Tee 22243 900400
10066052 811R 1¼ x ¾ x ¾ CxCxC Copper Reducing Tee 22258 n/a
10066053 811R 1¼ x ¾ x 1 CxCxC Copper Reducing Tee 22268 n/a
10066054 811R 1¼ x ¾ x 1¼ CxCxC Copper Reducing Tee 22248 n/a
10066044 811R 1¼ x ¾ x 11/2 CxCxC Copper Reducing Tee n/a n/a
10066055 811R 1¼ x 1 x 1/2 CxCxC Copper Reducing Tee 22238 n/a
10075122 811R 1¼ x 1 x ¾ CxCxC Copper Reducing Tee 94762 9100550
10075124 811R 1¼ x 1 x 1 CxCxC Copper Reducing Tee 14568 9100500
10066056 811R 1¼ x 1 x 1¼ CxCxC Copper Reducing Tee n/a n/a
10066395 811R 1¼ x 1 x 11/2 CxCxC Copper Reducing Tee n/a n/a
10075106 811R 1¼ x 1¼ x 1/2 CxCxC Copper Reducing Tee 94757 9100300
10075102 811R 1¼ x 1¼ x ¾ CxCxC Copper Reducing Tee 77452 9100250
10075104 811R 1¼ x 1¼ x 1 CxCxC Copper Reducing Tee 77447 910020
10066394 811R 11/2 x 1/2 x 1¼ CxCxC Copper Reducing Tee n/a n/a
10066009 811R 11/2 x 1/2 x 11/2 CxCxC Copper Reducing Tee n/a 9102400
10066195 811R 11/2 x ¾ x 1/2 CxCxC Copper Reducing Tee n/a n/a
10066383 811R 11/2 x ¾ x ¾ CxCxC Copper Reducing Tee n/a 9102300
10066397 811R 11/2 x ¾ x 1 CxCxC Copper Reducing Tee n/a n/a
10066058 811R 11/2 x ¾ x 1¼ CxCxC Copper Reducing Tee n/a n/a
10066043 811R 11/2 x ¾ x 11/2 CxCxC Copper Reducing Tee n/a n/a
10066042 811R 11/2 x ¾ x 2 CxCxC Copper Reducing Tee n/a n/a
10066011 811R 11/2 x 1 x ¾ CxCxC Copper Reducing Tee 79660 9102050
10066012 811R 11/2 x 1 x 1 CxCxC Copper Reducing Tee 15458 9102000
10066081 811R 11/2 x 1 x 1¼ CxCxC Copper Reducing Tee n/a n/a
XPress Product Number Description Viega Cross NIBCO cross
10062007807-C-2 21/2 FTGxC Copper Close Turn
90 Street Elbown/a 905940
10062012807-C-2 3 FTGxC Copper Close Turn
90 Street Elbown/a 905945
10062017807-C-2 4 FTGxC Copper Close Turn
90 Street Elbown/a 905955
10062071807-L-2 21/2 FTGxC Copper Long Turn
90 Street Elbow20638 908090
10062073807-L-2 3 FTGxC Copper Long Turn
90 Street Elbow20643 908095
10062074807-L-2 4 FTGxC Copper Long Turn
90 Street Elbow20648 n/a
100665608707-3 1/2 CxF Low Lead Brass & Copper
Female 90 Elbow79525 9082750
100665618707-3 ¾ CxF Low Lead Brass & Copper
Female 90 Elbow79540 B06415
100665628707-3 1 CxF Low Lead Brass & Copper
Female 90 Elbow79550 9082780
100665638707-3 1¼ CxF Low Lead Brass & Copper
Female 90 Elbow79560 B06470
100665648707-3 11/2 CxF Low Lead Brass & Copper
Female 90 Elbow79565 B06505
100665658707-3 2 CxF Low Lead Brass & Copper
Female 90 Elbow79570 B06535
100665668707-3 1/2 x 3/8 CxF Low Lead Brass & Copper
Female 90 Reducing Elbow79520 9082550
100665678707-3 1/2 x ¾ CxF Low Lead Brass & Copper
Female 90 Reducing Elbow79530 9082560
100665688707-3 ¾ x 1/2 CxF Low Lead Brass & Copper
Female 90 Reducing Elbow79535 B06430
100665698707-3 1 x 1/2 CxF Low Lead Brass & Copper
Female 90 Reducing Elbow79545 n/a
100665708707-4 1/2 CxM Low Lead Brass & Copper
Male 90 Elbow77492 B06990
100665718707-4 ¾ CxM Low Lead Brass & Copper
Male 90 Elbow77507 B07015
100665728707-4 1 CxM Low Lead Brass & Copper
Male 90 Elbow77512 B07035
100665738707-4 1¼ CxM Low Lead Brass & Copper
Male 90 Elbow77517 B07060
100665748707-4 11/2 CxM Low Lead Brass & Copper
Male 90 Elbow77522 B07090
100665758707-4 2 CxM Low Lead Brass & Copper
Male 90 Elbow77527 B07115
100665768707-4 1/2 x ¾ CxM Low Lead Brass & Copper
Male 90 Reducing Elbow77497 9082600
100665778707-4 ¾ x 1/2 CxM Low Lead Brass & Copper
Male 90 Reducing Elbow77502 B07025
10066578 8707-3-2 1/2 FTGXF 90 Female Street Elbow n/a n/a
10066418 8707-3-2 1/2 FTGXF 90 Female Street Elbow n/a n/a
100753668707-3-5 1/2 CxF Low Lead Brass Drop
Ear 90 Elbow79190 B066850
100753688707-3-5 ¾ CxF Low Lead Brass Drop
Ear 90 Elbow79195 B06700
100753698707-3-5 1 CxF Low Lead Brass Drop
Ear 90 Elbown/a n/a
100753678707-3-5 1/2 x 3/8 CxF Low Lead Brass Reducing
Drop Ear 90 Elbow79185 n/a
n/a = Not Available
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
63
XPress Product Number Description Viega Cross NIBCO cross
10066013 811R 11/2 x 1 x 11/2 CxCxC Copper Reducing Tee 15463 9101900
10066108 811R 11/2 x 1 x 2 CxCxC Copper Reducing Tee n/a n/a
10066059 811R 11/2 x 1¼ x 1/2 CxCxC Copper Reducing Tee n/a n/a
10066060 811R 11/2 x 1¼ x ¾ CxCxC Copper Reducing Tee 22233 n/a
10066014 811R 11/2 x 1¼ x 1 CxCxC Copper Reducing Tee 15453 9101750
10075126 811R 11/2 x 1¼ x 1¼ CxCxC Copper Reducing Tee 15483 9101700
10066393 811R 11/2 x 1¼ x 11/2 CxCxC Copper Reducing Tee n/a n/a
10066109 811R 11/2 x 1¼ x 2 CxCxC Copper Reducing Tee n/a n/a
10066015 811R 11/2 x 11/2 x 1/2 CxCxC Copper Reducing Tee 15448 910145
10075108 811R 11/2 x 11/2 x ¾ CxCxC Copper Reducing Tee 77462 910140
10075110 811R 11/2 x 11/2 x 1 CxCxC Copper Reducing Tee 77467 910135
10075112 811R 11/2 x 11/2 x 1¼ CxCxC Copper Reducing Tee 77472 9101300
10066384 811R 2 x 1/2 x 2 CxCxC Copper Reducing Tee n/a 9104250
10066121 811R 2 x ¾ x ¾ CxCxC Copper Reducing Tee n/a n/a
10066092 811R 2 x ¾ x 11/2 CxCxC Copper Reducing Tee n/a n/a
10066388 811R 2 x ¾ x 2 CxCxC Copper Reducing Tee n/a n/a
10066079 811R 2 x 1 x 1/2 CxCxC Copper Reducing Tee n/a n/a
10066062 811R 2 x 1 x ¾ CxCxC Copper Reducing Tee n/a n/a
10066017 811R 2 x 1 x 1 CxCxC Copper Reducing Tee n/a n/a
10066126 811R 2 x 1 x 1¼ CxCxC Copper Reducing Tee n/a n/a
10066197 811R 2 x 1 x 11/2 CxCxC Copper Reducing Tee n/a n/a
10066018 811R 2 x 1 x 2 CxCxC Copper Reducing Tee n/a 9103700
10066063 811R 2 x 1¼ x ¾ CxCxC Copper Reducing Tee n/a n/a
10066129 811R 2 x 1¼ x 1 CxCxC Copper Reducing Tee n/a n/a
10066019 811R 2 x 1¼ x 1¼ CxCxC Copper Reducing Tee 15518 9103500
10066125 811R 2 x 1¼ x 11/2 CxCxC Copper Reducing Tee n/a n/a
10066064 811R 2 x 1¼ x 2 CxCxC Copper Reducing Tee n/a n/a
10066065 811R 2 x 11/2 x 1/2 CxCxC Copper Reducing Tee n/a n/a
10066020 811R 2 x 11/2 x ¾ CxCxC Copper Reducing Tee 15513 9103300
10066021 811R 2 x 11/2 x 1 CxCxC Copper Reducing Tee 15498 9103250
10066022 811R 2 x 11/2 x 1¼ CxCxC Copper Reducing Tee 15508 9103200
10066023 811R 2 x 11/2 x 11/2 CxCxC Copper Reducing Tee 15503 9103150
10066024 811R 2 x 11/2 x 2 CxCxC Copper Reducing Tee 22228 n/a
10066385 811R 2 x 2 x 1/2 CxCxC Copper Reducing Tee 15538 9103000
10075114 811R 2 x 2 x ¾ CxCxC Copper Reducing Tee 94777 9102950
10075116 811R 2 x 2 x 1 CxCxC Copper Reducing Tee 94772 910290
10075118 811R 2 x 2 x 1¼ CxCxC Copper Reducing Tee 77487 9102850
10075120 811R 2 x 2 x 11/2 CxCxC Copper Reducing Tee 77482 910280
10066499 811R 2 x 11/2 x 21/2 CxCxC Copper Reducing Tee n/a n/a
10066595 811R 21/2 x ¾ x 2 CxCxC Copper Reducing Tee n/a n/a
10066502 811R 21/2 x ¾ x 21/2 CxCxC Copper Reducing Tee 20684 910620
10066596 811R 21/2 x 1 x 2 CxCxC Copper Reducing Tee n/a n/a
10066514 811R 21/2 x 1 x 21/2 CxCxC Copper Reducing Tee 20689 910590
10066504 811R 21/2 x 1¼ x 21/2 CxCxC Copper Reducing Tee 20694 910540
10066597 811R 21/2 x 11/2 x 11/2 CxCxC Copper Reducing Tee n/a n/a
10066598 811R 21/2 x 11/2 x 2 CxCxC Copper Reducing Tee n/a n/a
10066507 811R 21/2 x 11/2 x 21/2 CxCxC Copper Reducing Tee 20699 910530
10066599 811R 21/2 x 2 x ¾ CxCxC Copper Reducing Tee 20704 910520
10066600 811R 21/2 x 2 x 1 CxCxC Copper Reducing Tee 20709 910515
10066601 811R 21/2 x 2 x 1¼ CxCxC Copper Reducing Tee n/a 910510
10066602 811R 21/2 x 2 x 11/2 CxCxC Copper Reducing Tee 22283 910505
CROSS REFERENCE CHARTFittings
XPress Product Number Description Viega Cross NIBCO cross
10066603 811R 21/2 x 2 x 2 CxCxC Copper Reducing Tee 22278 910500
10066174 811R 21/2 x 2 x 21/2 CxCxC Copper Reducing Tee 20714 910495
10066515 811R 21/2 x 2 x 3 CxCxC Copper Reducing Tee n/a n/a
10068042 811R 21/2 x 21/2 x 1/2 CxCxC Copper Reducing Tee 22303 910490
10068045 811R 21/2 x 21/2 x ¾ CxCxC Copper Reducing Tee 22298 910485
10068048 811R 21/2 x 21/2 x 1 CxCxC Copper Reducing Tee 22293 910480
10068051 811R 21/2 x 21/2 x 1¼ CxCxC Copper Reducing Tee 22288 910475
10068054 811R 21/2 x 21/2 x 11/2 CxCxC Copper Reducing Tee 20803 910470
10068057 811R 21/2 x 21/2 x 2 CxCxC Copper Reducing Tee 20688 910465
10066522 811R 3 x ¾ x 21/2 CxCxC Copper Reducing Tee n/a n/a
10066523 811R 3 x ¾ x 3 CxCxC Copper Reducing Tee 20719 910885
10066524 811R 3 x 1 x 21/2 CxCxC Copper Reducing Tee n/a n/a
10066525 811R 3 x 1 x 3 CxCxC Copper Reducing Tee 20724 910850
10066526 811R 3 x 1¼ x 3 CxCxC Copper Reducing Tee 20729 910790
10066527 811R 3 x 11/2 x 3 CxCxC Copper Reducing Tee 20727 910780
10066604 811R 3 x 2 x 2 CxCxC Copper Reducing Tee 20732 910755
10066529 811R 3 x 2 x 21/2 CxCxC Copper Reducing Tee 20734 910750
10066530 811R 3 x 2 x 3 CxCxC Copper Reducing Tee 20793 910745
10066605 811R 3 x 21/2 x 2 CxCxC Copper Reducing Tee 20744 910720
10066136 811R 3 x 21/2 x 21/2 CxCxC Copper Reducing Tee 20749 910715
10066137 811R 3 x 21/2 x 3 CxCxC Copper Reducing Tee 20754 910710
10068060 811R 3 x 3 x 1/2 CxCxC Copper Reducing Tee 20759 910705
10068063 811R 3 x 3 x ¾ CxCxC Copper Reducing Tee 22323 910700
10068066 811R 3 x 3 x 1 CxCxC Copper Reducing Tee 22308 910695
10068069 811R 3 x 3 x 1¼ CxCxC Copper Reducing Tee 22313 910690
10068072 811R 3 x 3 x 11/2 CxCxC Copper Reducing Tee 20798 910685
10068075 811R 3 x 3 x 2 CxCxC Copper Reducing Tee 20698 910680
10062079 811R 3 x 3 x 21/2 CxCxC Copper Reducing Tee 20703 910675
10066538 811R 4 x 11/2 x 3 CxCxC Copper Reducing Tee n/a n/a
10066539 811R 4 x 2 x 4 CxCxC Copper Reducing Tee n/a 911390
10066138 811R 4 x 21/2 x 4 CxCxC Copper Reducing Tee n/a 911350
10066606 811R 4 x 3 x 11/2 CxCxC Copper Reducing Tee n/a n/a
10066607 811R 4 x 3 x 2 CxCxC Copper Reducing Tee 20774 911330
10066139 811R 4 x 3 x 21/2 CxCxC Copper Reducing Tee n/a 911325
10066096 811R 4 x 3 x 3 CxCxC Copper Reducing Tee 20784 911320
10066140 811R 4 x 3 x 4 CxCxC Copper Reducing Tee n/a 911310
10068078 811R 4 x 4 x 1/2 CxCxC Copper Reducing Tee 20788 911265
10068081 811R 4 x 4 x ¾ CxCxC Copper Reducing Tee 20793 911260
10068084 811R 4 x 4 x 1 CxCxC Copper Reducing Tee 20794 911255
10068087 811R 4 x 4 x 1¼ CxCxC Copper Reducing Tee 20795 911250
10068090 811R 4 x 4 x 11/2 CxCxC Copper Reducing Tee 20808 600245
10068093 811R 4 x 4 x 2 CxCxC Copper Reducing Tee 20713 911240
10062078 811R 4 x 4 x 21/2 CxCxC Copper Reducing Tee 20718 911235
10062076 811R 4 x 4 x 3 CxCxC Copper Reducing Tee 20723 911230
10066070 811BH 1/2 x 1/2 x ¾ CxCxC Copper Bullhead Tee 77382 909730
10066006 811BH 1/2 x 1/2 x 1 CxCxC Copper Bullhead Tee 15493 9097250
10066071 811BH ¾ x ¾ x 1 CxCxC Copper Bullhead Tee 77407 909845
10066008 811BH 1 x 1 x 1¼ CxCxC Copper Bullhead Tee 15488 9099400
10066128 811BH 1 x 1 x 2 CxCxC Copper Bullhead Tee n/a n/a
10066107 811BH 1¼ x 1¼ x 2 CxCxC Copper Bullhead Tee n/a n/a
10066090 811BH 11/2 x 11/2 x 2 CxCxC Copper Bullhead Tee n/a n/a
n/a = Not Available
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600064
www.apollovalves.com
CROSS REFERENCE CHARTFittings
XPress Product Number Description Viega Cross NIBCO cross
10068017 818 21/2 x 1¼ FTGxC Copper Fitting Reducer 20815 n/a
10068004 818 21/2 x 11/2 FTGxC Copper Fitting Reducer 20813 n/a
10075165 818 21/2 x 2 FTGxC Copper Fitting Reducer 20758 900935
10068005 818 3 x 1/2 FTGxC Copper Fitting Reducer n/a n/a
10068019 818 3 x ¾ FTGxC Copper Fitting Reducer n/a n/a
10068007 818 3 x 1 FTGxC Copper Fitting Reducer n/a n/a
10068008 818 3 x 1¼ FTGxC Copper Fitting Reducer 20817 n/a
10068020 818 3 x 11/2 FTGxC Copper Fitting Reducer 20818 n/a
10068010 818 3 x 2 FTGxC Copper Fitting Reducer 20763 n/a
10057500 818 3 x 21/2 FTGxC Copper Fitting Reducer 20768 900965
10068011 818 4 x 1/2 FTGxC Copper Fitting Reducer n/a n/a
10068022 818 4 x ¾ FTGxC Copper Fitting Reducer n/a n/a
10068013 818 4 x 1 FTGxC Copper Fitting Reducer n/a n/a
10068014 818 4 x 1¼ FTGxC Copper Fitting Reducer n/a n/a
10068023 818 4 x 11/2 FTGxC Copper Fitting Reducer n/a n/a
10068016 818 4 x 2 FTGxC Copper Fitting Reducer n/a n/a
10057503 818 4 x 21/2 FTGxC Copper Fitting Reducer 20778 901040
10057506 818 4 x 3 FTGxC Copper Fitting Reducer 20783 901035
10075370 836 1/2 CxC Copper Cross Over 77742 928025
10075372 836 ¾ CxC Copper Cross Over 77747 928035
10075860 8733 1/2 CxC Low Lead Brass Union 79125 B25540
10075862 8733 ¾ CxC Low Lead Brass Union 79130 9256500
10075864 8733 1 CxC Low Lead Brass Union 79135 9256600
10075866 8733 1¼ CxC Low Lead Brass Union 79140 9256630
10075868 8733 11/2 CxC Low Lead Brass Union 79145 9256640
10075870 8733 2 CxC Low Lead Brass Union 79150 9256650
10075860 8733 1/2 CxC Brass Union 77667 n/a
10075862 8733 ¾ CxC Brass Union 77672 n/a
10075864 8733 1 CxC Brass Union 77677 n/a
10075866 8733 1¼ CxC Brass Union 77682 n/a
10075868 8733 11/2 CxC Brass Union 77687 n/a
10075870 8733 2 CxC Brass Union 77692 n/a
10075872 8733-3 1/2 CxF Low Lead Brass Female Union 79700 B25860
10075874 8733-3 ¾ CxF Low Lead Brass Female Union 79705 9256710
10075876 8733-3 1 CxF Low Lead Brass Female Union 79710 B25885
10075878 8733-3 1¼ CxF Low Lead Brass Female Union 79715 B25895
10075880 8733-3 11/2 CxF Low Lead Brass Female Union 79720 B25905
10075882 8733-3 2 CxF Low Lead Brass Female Union 79725 B25915
10075884 8733-4 1/2 CxM Low Lead Brass Male Union 79730 9256800
10075886 8733-4 ¾ CxM Low Lead Brass Male Union 79735 9256810
10075888 8733-4 1 CxM Low Lead Brass Male Union 79740 9256820
10075890 8733-4 1¼ CxM Low Lead Brass Male Union 79745 B26045
10075892 8733-4 11/2 CxM Low Lead Brass Male Union 79750 B26055
10075894 8733-4 2 CxM Low Lead Brass Male Union 79755 9256850
10075702 8741 2 Copper 125 lb. Flange 79695 B305506
10061761 8741 21/2 Large Diameter Copper 125 lb. Flange 20853 914555
10061767 8741 3 Large Diameter Copper 125 lb. Flange 20858 914560
10061736 8741 4 Large Diameter Copper 125 lb. Flange 20863 914570
10061763 8771 21/2 Large Diameter Copper 150 lb. Flange n/a n/a
10061769 8771 3 Large Diameter Copper 150 lb. Flange n/a n/a
10061738 8771 4 Large Diameter Copper 150 lb. Flange n/a n/a
10066550 811BH 11/2 x 11/2 x 3 CxCxC Copper Bullhead Tee n/a n/a
10066551 811BH 2 x 2 x 3 CxCxC Copper Bullhead Tee n/a n/a
10066135 811BH 21/2 x 21/2 x 3 CxCxC Copper Bullhead Tee n/a n/a
10066094 811BH 21/2 x 21/2 x 4 CxCxC Copper Bullhead Tee n/a n/a
100665798712 1/2 CxCxF Low Lead Brass & Copper
Female Outlet Tee79580 9116470
100665808712 ¾ CxCxF Low Lead Brass & Copper
Female Outlet Tee79595 n/a
100661558712 ¾ x ¾ x ¼ CxCxF Low Lead Brass & Copper
Female Outlet Reducing Tee79585 9116500
100665818712 ¾ x ¾ x 1/2 CxCxF Low Lead Brass & Copper
Female Outlet Reducing Tee79590 9116502
100665828712 1 x 1 x 1/2 CxCxF Low Lead Brass & Copper
Female Outlet Reducing Tee79760 9116505
100665838712 1 x 1 x ¾ CxCxF Low Lead Brass & Copper
Female Outlet Reducing Tee79765 9116510
100665848712 1¼ x 1¼ x 1/2 CxCxF Low Lead Brass &
Copper Female Outlet Reducing Tee79770 9116520
100665858712 1¼ x 1¼ x ¾ CxCxF Low Lead Brass &
Copper Female Outlet Reducing Tee79775 9116530
100665868712 11/2 x 11/2 x 1/2 CxCxF Low Lead Brass &
Copper Female Outlet Reducing Tee79780 9116535
100665878712 11/2 x 11/2 x ¾ CxCxF Low Lead Brass &
Copper Female Outlet Reducing Tee79785 9116540
100665888712 2 x 2 x 1/2 CxCxF Low Lead Brass & Copper
Female Outlet Reducing Tee79790 B14760
100665898712 2 x 2 x ¾ CxCxF Low Lead Brass & Copper
Female Outlet Reducing Tee79795 9116550
10075166 817 1/2 Copper Tube Cap 77712 9172650
10075168 817 ¾ Copper Tube Cap 77717 917270
10075170 817 1 Copper Tube Cap 77722 917275
10075172 817 1¼ Copper Tube Cap 77727 917280
10075174 817 11/2 Copper Tube Cap 77732 917285
10075176 817 2 Copper Tube Cap 77737 9172900
10062142 817 21/2 Copper Tube Cap 20833 917295
10062147 817 3 Copper Tube Cap 20843 917300
10062152 817 4 Copper Tube Cap 20848 917310
10075146 818 ¾ x 1/2 FTGxC Copper Fitting Reducer 78077 900810
10075150 818 1 x 1/2 FTGxC Copper Fitting Reducer 78082 900835
10075148 818 1 x ¾ FTGxC Copper Fitting Reducer 78087 900830
10075336 818 1¼ x 1/2 FTGxC Copper Fitting Reducer 22333
10075154 818 1¼ x ¾ FTGxC Copper Fitting Reducer 78092 9008550
10075156 818 1¼ x 1 FTGxC Copper Fitting Reducer 78097 900850
10075332 818 11/2 x 1/2 FTGxC Copper Fitting Reducer 79850 9008900
10075334 818 11/2 x ¾ FTGxC Copper Fitting Reducer 14543 9008850
10075158 818 11/2 x 1 FTGxC Copper Fitting Reducer 78102 9008800
10075160 818 11/2 x 1¼ FTGxC Copper Fitting Reducer 78107 900875
10075338 818 2 x 1/2 FTGxC Copper Fitting Reducer 79855 9009250
10075340 818 2 x ¾ FTGxC Copper Fitting Reducer 79860 9009200
10075162 818 2 x 1 FTGxC Copper Fitting Reducer 78112 900915
10075152 818 2 x 1¼ FTGxC Copper Fitting Reducer 78117 9009100
10075164 818 2 x 11/2 FTGxC Copper Fitting Reducer 78122 900905
10068025 818 21/2 x 1/2 FTGxC Copper Fitting Reducer n/a n/a
10068001 818 21/2 x ¾ FTGxC Copper Fitting Reducer n/a n/a
10068002 818 21/2 x 1 FTGxC Copper Fitting Reducer 20814 n/a
XPress Product Number Description Viega Cross NIBCO cross
n/a = Not Available
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
65
Terms & Conditions
TERMS & CONDITIONS OF SALE• Payment: 2% 10th prox. Net 30 days.
• All prices F.O.B. shipping point with freight allowed on shipments of 750 pounds and/or $5,000 net minimum to all shipping points within the United States excluding Alaska and Hawaii. No freight allowed on Air Freight or Parcel Post shipments. Claims for shortages must be made within 10 days of receipt of material. Our responsibility ends when a delivery receipt is furnished us by the carrier.
• No invoice rendered For Less than $50.00.
• No freight will be allowed on Air Freight, Air Express, Parcel Post or U.P.S. shipments.
• All Conbraco products may be combined to make sufficient weight for full freight allowance.
• Phone order quoted prices are subject to correction. Prices and designs are subject to change without notice.
• Orders for material of special design or specification are made to customer’s order and are not subject to cancellation or return.
• All goods returned to us will not be accepted unless a full explanation has been made and our written authorized permission obtained in advance. All goods returned - if accepted - will be credited at invoice price, less 30% for service and rehandling charges, plus shipping expenses.
• We reserve the right to adjust orders to box quantities.
For a
dditi
onal
infor
mat
ion, s
ubm
ittal
shee
ts an
d man
uals,
visit
www
.apoll
ovalv
es.co
m
APOLLO VALVES Customer Service (704) 841-600066
www.apollovalves.com
WARRANTY AND LIMITATIONS OF LIABILITYConbraco Industries, Inc. and Elkhart Products Corporation warrants, to its initial purchaser only, that its products which are delivered to this initial purchaser will be of the kind described in the order or price list and will be free of defects in workmanship or material. For Valve products, this warranty is for a period of FIVE years from the date of delivery to you, our initial purchaser. This warranty applies to Apollo brand product with “Made in the USA” markings only. Should any failure to conform to these warranties appear within FIVE years after the date of the initial delivery to our initial purchaser, Conbraco will, upon written notification thereof and substantiation that the goods have been stored, installed, maintained and operated in accordance with Conbraco‘s recommendations and standard industry practice, correct such defects by suitable repair or replacement at Conbraco’s own expense. For All Fittings, (Elkhart Products Corporation) this warranty is for a period of FIFTY years from the date of delivery to you, our initial purchaser. Elkhart Products Corporation also warrants that all fittings will be free from defects in material and workmanship which will impair their usefulness provided they are used in the service for which they are recommended. Any fitting which proves to be defective will be replaced or a credit issued, but no incidental labor charges, expenses or damages will be allowed. Apollo InternationalTM Products: Conbraco Industries, Inc. warrants its Apollo InternationalTM products, to be of the kind described in the order or price list and will be free of defects in workmanship or material for a period of TWO years from the date of delivery to you, our initial purchaser.
THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OTHER WARRANTY OF QUALITY, WHETHER EXPRESSED OR IMPLIED, EXCEPT THE WARRANTY OF TITLE AND AGAINST PATENT INFRINGEMENT. Correction of non-conformities, in the manner and for the period of time provided above, shall constitute fulfillment of all liabilities of Conbraco Industries, Inc. and Elkhart Products Corporation to our initial purchaser, with respect to the goods, whether based on contract, negligence, strict tort or otherwise. It is the intention of Conbraco Industries, Inc. that no warranty of any kind, whether expressed or implied shall pass through our initial purchaser to any other person or corporation.
LIMITATION OF LIABILITY: Conbraco Industries, Inc. and Elkhart Products Corporation SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR SPECIAL OR CONSEQUENTIAL DAMAGES SUCH AS, BUT NOT LIMITED TO, DAMAGES OR TO LOSS OF OTHER PROPERTY OR EQUIPMENT, LOSS OF PROFITS OR REVENUE, COST OF CAPITAL, COST OF PURCHASED OR REPLACEMENT GOODS, OR CLAIMS OF CUSTOMERS OF OUR INITIAL PURCHASER. THE REMEDIES OF OUR INITIAL PURCHASER, AND ALL OTHERS, SET FORTH HEREIN, ARE EXCLUSIVE, AND THE LIABILITY OF CONBRACO WITH RESPECT TO SAME SHALL NOT, EXCEPT AS EXPRESSLY PROVIDED HEREIN, EXCEED THE PRICE OF THE GOODS UPON WHICH SUCH LIABILITY IS BASED.
* It is the end user’s responsibility to confirm that items intended for use satisfy local codes and standards.
Warranty Information
For additional information, subm
ittal sheets and manuals, visit w
ww.elkhartproducts.com
ELKHART PRODUCTS CORPORATION Customer Service (574) 264-3181www.elkhartproducts.com
67
American Made Quality you can Depend On.
Mechanical Leak Before Press® on small diameter, within a 120 degree turn.
Deepest cup depth on the market.
Short turn elbows for space saving alternatives.
Radial orientation on installation is not necessary on the APOLLOXPRESS® line.
VISUAL and Mechanical Leak Before Press® feature on our large diameter fittings.
Patented stainless steel grab ring on large diameter 2 ½” - 4”
Unique Floating flanges can be put back in place during installation.
Features of one piece welded construction tees include:
- Custom Factory welded by certified welders.
- Reduced weight.
- Height reduction resulting in smaller envelope.
100% water tested weld or press.
Lead Free valve options available.
BIM ready 3D CAD drawings available.
current as of 7/20/15
AREAS COVERED EMAIL PHONESENIOR MANAGEMENTBrian Ragone Senior VP - Sales & Marketing [email protected] 513-200-5415Don Russell VP Sales - Commercial & Industrial [email protected] 614-943-0688
REGIONAL SALES DIRECTORS – COMMERCIAL & INDUSTRIALMike Bedzyk Central/Northeast [email protected] 614-619-4993Mitch Davis S. Central/Southeast [email protected] 678-628-4478Phillip Merino West [email protected] 702-960-9935
REGIONAL SALES MANAGERS – COMMERCIAL & INDUSTRIALKevin Ashworth Southeast [email protected] 757-272-6200Keith Baca Southeast [email protected] 615-630-3892Mike Blair Central [email protected] 330-413-0035Steve Brown Northwest [email protected] 425-985-5095Ken Copeland Southwest [email protected] 623-853-5744Ben Lauletta Northeast [email protected] 518-795-4629Wesley Reinart S. Central [email protected] 214-620-9901
INDUSTRIAL MARKET MANAGERSDave Eck Northeast [email protected] 302-268-4411Ken Griffin Industrial & Commercial Valve Trainer [email protected] 704-621-9296Mark Sordelet Central [email protected] 260-433-7393Skip Wilson Northwest [email protected] 760-518-2222
BACKFLOW MARKET MANAGERSPete Chapman National Manager [email protected] 559-577-2593Cary Wiley East [email protected] 678-642-3356
APOLLOXPRESS MARKET MANAGERSJohn Rankel National Manager [email protected] 702-445-0309Todd Green South Central [email protected] 501-920-2029Brian Jennings North Central [email protected] 859-394-3319Robert Purchia East [email protected] 704-960-3532
AREAS COVERED EMAIL PHONEAPOLLOPUSH MARKET MANAGERSGeorge Dragosz Northeast [email protected] 574-206-3953Mark Schanback Southeast [email protected] 407-916-9626Jeremy Small Central [email protected] 214-766-2106Dean Weidlein West [email protected] 702-355-8615
WROT/CAST MARKET MANAGERSCindy Goodwin National Manager [email protected] 517-294-0007
CANADAJeff Cooper General Manager [email protected] 416-451-9336Andy Fretz Commercial [email protected] 647-281-3161Jim Todman Industrial [email protected] 905-407-8385
LASCO FITTINGS REGIONAL SALES MANAGERS – IRRIGATIONDavid Beyer Northeast [email protected] 561-718-9379Don Caver Central [email protected] 469-628-4918Ben Freeman Southeast [email protected] 205-919-4944Bryan Jackman West [email protected] 714-673-5875Jimmy White National Sales Manager [email protected] 731-234-2372Rick Williamson Eastern Specifications Manager [email protected] 386-451-2307
INTERNATIONAL SALES MANAGERSBill McNamara Director of International Sales [email protected] 1-574-903-3821JR Jefferson Central/South America & the Caribbean [email protected] 1-832-220-3783Brencliff Group Australia, New Zealand [email protected] 61 477 223110Pegler Yorkshire United Kingdom [email protected] 44-7740-449858Pegler Yorkshire Mid East Middle East/India [email protected] 971-4-454-2353
Europe/Africa/Israel [email protected] 1-704-841-6000
REGIONAL MANAGEMENT – APOLLO VALVES, ELKHART PRODUCTS & LASCO FITTINGS
To find a Sales Rep in your area, visit our website. www.apollovalves.com/replocator
AXCAT 8/15 5,000 CG
For more information about Apollo Valves, Elkhart Products Corporation, and our family of AMERICAN MADE products, contact:
APOLLO SALES and CUSTOMER SERVICE P.O. Box 247 | Matthews, NC 28105Phone: (704) 841-6000 | Fax: (704) 841-6020 www.apollovalves.com
ELKHART SALES and CUSTOMER SERVICE 1255 Oak Street | Elkhart, IN 46514
Phone: (800) 395-7313 | Fax: (574) 264-0103 www.elkhartproducts.com