Date post: | 23-Jul-2016 |
Category: |
Documents |
Upload: | ecor-research |
View: | 222 times |
Download: | 1 times |
Bologna AirportGuglielmo Marconi
Bologna
Modena
Ca’di Sola
Castelvetrodi Modena
A14 >>Ancona
<< A14Milano
Modena Sud
A22 << Brennero
Fire
nze
<< A
1
A13
>> P
adov
a
CONTACT
Ing. Riccardo Franci
Tel. +39 059 702257
The Ecor International Campus
Ecor Research S.p.A. Division
Strada Statale 569, 54 41014 Castelvetro di Modena (Modena) - Italy
Tel. +39 059 702257
ecorcampus.com - [email protected]
clau
diav
icin
elli.
com
gra
phic
des
ign
mechanicalcharacterization
mechanical
mechanicalcharacterization
Production SiteSchio (Vi)
LaboratoryCastelvetro di Modena (Mo)
Research CenterCastelvetro di Modena (Mo)
Materials used in every sector, such as, for instance, aerospace, automotive, food packaging or contact, personal care production, biomedical, pharmaceuticals, metals, etc., are subjected to a range of mechanical deformations (stresses and strains) over a wide variety of environmental conditions in practical daily use.
The increasing demand for high quality, high-performing products makes the understanding of complex viscoelastic mechanical properties of materials of fundamental importance.
Ecor Research, thanks to its team of material engineering experts, can help customers to determine and ensure the suitability of technical solutions for applications and processes and to evaluate their performance.
We can characterize different materials, plastics or metals, rigid or flexible samples, setting up tailor-made tests to meet customer’s needs.
DIFFERENT MATERIALS CHARACTERIZATION
We can perform tailor-made tests to investigate mechanical properties and viscoelastic properties by a Dynamic-Mechanical-Thermal-Analysis (DMTA).
MECHANICAL CHARACTERIZATION
mechanical
STRESS AND DEFORMATION IN DAILY USE
characterization
PLASTIC AND RUBBER• Rigid plastics• Flexible plastics• Elastomers• Fibers• Films
METALS• Thin metallic samples • Flexible samples• Metallic foils
RSA-G2 is an advanced platform for mechanical analysis of solids.
It is capable of applying a variety of deformation types and collect material parameters, providing detailed information about material performance characteristics.
The instrument includes a convection oven for precise and accurate temperature control that allows to perform test:
• at room temperature
• in isothermal temperature
• in temperature ramp
• in air or in inert atmosphere (argon or nitrogen gas)
SOLID ANALYSER RSA-G2, TA INSTRUMENTS
• Modulus of Elasticity • Complex Modulus • Storage and Loss Moduli • Damping properties • Compliance • Frequency effects• Creep and recovery• Stress Relaxation• Glass transition
• Orientation effects• Stress-Strain curves• Dynamic Fatigue• Toughness• Viscoelasticity of materials• Temperature effect on mechanical properties• Thermal transitions
RSA-G2 SPECIFICATIONS
MINIMUM FORCE 0.0005 N
MAXIMUM FORCE 35 N
FORCE RESOLUTION 0.00001 N
DYNAMIC DISPLACEMENT RANGE ± 0.00005 to ± 1.5 mm
DISPLACEMENT RESOLUTION 1 nm
MODULUS RANGE 103 to 3∙1012 Pa
MODULUS PRECISION ±1%
FREQUENCY RANGE 2∙10-5 to 100 Hz
TEMPERATURE RANGE Room Temperature to 500°C
HEATING/COOLING RATE 0.1 to 60°C/min
ISOTHERMAL STABILITY ± 0.1°C
BENDING DUAL AND SINGLE CANTILEVER
COMPRESSION TRACTION
TO T H E F U T UR
ECRO
SSROADS
2016 AND THE MILESTONE OF 40 YEARS OF BUSINESS
Founded as a manufacturing workshop, in the course of time experienced a
constant evolution, that led the company to the creation of strategic alliances
with multinationals.
Welding and special processes are its core competences and the expertise
reached, always more specialized, contributed to make ECOR Research the
company it is today: increasingly oriented to the applied research world.
Aiming at the diversification of its markets and at reaching new goals, in a few
years has achieved ambitious certifications in Aerospace&Defense field and the
accreditation of important players.
Enabling Technologies and Research are the words that drive ECOR Research
strategies, whose production model is evolving with success towards an
integrated system of production and development.
aerospace & defenseintegrated simulation advanced mechanics food industry
aerospace & defenseintegrated simulation advanced mechanics food industry
In addition, we can simulate the in service conditions to understand and analyse the material behaviour during its lifetime.
Bologna AirportGuglielmo Marconi
Bologna
Modena
Ca’di Sola
Castelvetrodi Modena
A14 >>Ancona
<< A14Milano
Modena Sud
A22 << Brennero
Fire
nze
<< A
1
A13
>> P
adov
a
CONTACT
Ing. Riccardo Franci
Tel. +39 059 702257
The Ecor International Campus
Ecor Research S.p.A. Division
Strada Statale 569, 54 41014 Castelvetro di Modena (Modena) - Italy
Tel. +39 059 702257
ecorcampus.com - [email protected]
clau
diav
icin
elli.
com
gra
phic
des
ign
mechanicalcharacterization
mechanical
mechanicalcharacterization
Production SiteSchio (Vi)
LaboratoryCastelvetro di Modena (Mo)
Research CenterCastelvetro di Modena (Mo)
Materials used in every sector, such as, for instance, aerospace, automotive, food packaging or contact, personal care production, biomedical, pharmaceuticals, metals, etc., are subjected to a range of mechanical deformations (stresses and strains) over a wide variety of environmental conditions in practical daily use.
The increasing demand for high quality, high-performing products makes the understanding of complex viscoelastic mechanical properties of materials of fundamental importance.
Ecor Research, thanks to its team of material engineering experts, can help customers to determine and ensure the suitability of technical solutions for applications and processes and to evaluate their performance.
We can characterize different materials, plastics or metals, rigid or flexible samples, setting up tailor-made tests to meet customer’s needs.
DIFFERENT MATERIALS CHARACTERIZATION
We can perform tailor-made tests to investigate mechanical properties and viscoelastic properties by a Dynamic-Mechanical-Thermal-Analysis (DMTA).
MECHANICAL CHARACTERIZATION
mechanical
STRESS AND DEFORMATION IN DAILY USE
characterization
PLASTIC AND RUBBER• Rigid plastics• Flexible plastics• Elastomers• Fibers• Films
METALS• Thin metallic samples • Flexible samples• Metallic foils
RSA-G2 is an advanced platform for mechanical analysis of solids.
It is capable of applying a variety of deformation types and collect material parameters, providing detailed information about material performance characteristics.
The instrument includes a convection oven for precise and accurate temperature control that allows to perform test:
• at room temperature
• in isothermal temperature
• in temperature ramp
• in air or in inert atmosphere (argon or nitrogen gas)
SOLID ANALYSER RSA-G2, TA INSTRUMENTS
• Modulus of Elasticity • Complex Modulus • Storage and Loss Moduli • Damping properties • Compliance • Frequency effects• Creep and recovery• Stress Relaxation• Glass transition
• Orientation effects• Stress-Strain curves• Dynamic Fatigue• Toughness• Viscoelasticity of materials• Temperature effect on mechanical properties• Thermal transitions
RSA-G2 SPECIFICATIONS
MINIMUM FORCE 0.0005 N
MAXIMUM FORCE 35 N
FORCE RESOLUTION 0.00001 N
DYNAMIC DISPLACEMENT RANGE ± 0.00005 to ± 1.5 mm
DISPLACEMENT RESOLUTION 1 nm
MODULUS RANGE 103 to 3∙1012 Pa
MODULUS PRECISION ±1%
FREQUENCY RANGE 2∙10-5 to 100 Hz
TEMPERATURE RANGE Room Temperature to 500°C
HEATING/COOLING RATE 0.1 to 60°C/min
ISOTHERMAL STABILITY ± 0.1°C
BENDING DUAL AND SINGLE CANTILEVER
COMPRESSION TRACTION
TO T H E F U T UR
ECRO
SSROADS
2016 AND THE MILESTONE OF 40 YEARS OF BUSINESS
Founded as a manufacturing workshop, in the course of time experienced a
constant evolution, that led the company to the creation of strategic alliances
with multinationals.
Welding and special processes are its core competences and the expertise
reached, always more specialized, contributed to make ECOR Research the
company it is today: increasingly oriented to the applied research world.
Aiming at the diversification of its markets and at reaching new goals, in a few
years has achieved ambitious certifications in Aerospace&Defense field and the
accreditation of important players.
Enabling Technologies and Research are the words that drive ECOR Research
strategies, whose production model is evolving with success towards an
integrated system of production and development.
aerospace & defenseintegrated simulation advanced mechanics food industry
aerospace & defenseintegrated simulation advanced mechanics food industry
In addition, we can simulate the in service conditions to understand and analyse the material behaviour during its lifetime.
Materials used in every sector, such as, for instance, aerospace, automotive, food packaging or contact, personal care production, biomedical, pharmaceuticals, metals, etc., are subjected to a range of mechanical deformations (stresses and strains) over a wide variety of environmental conditions in practical daily use.
The increasing demand for high quality, high-performing products makes the understanding of complex viscoelastic mechanical properties of materials of fundamental importance.
Ecor Research, thanks to its team of material engineering experts, can help customers to determine and ensure the suitability of technical solutions for applications and processes and to evaluate their performance.
We can characterize different materials, plastics or metals, rigid or flexible samples, setting up tailor-made tests to meet customer’s needs.
DIFFERENT MATERIALS CHARACTERIZATION
We can perform tailor-made tests to investigate mechanical properties and viscoelastic properties by a Dynamic-Mechanical-Thermal-Analysis (DMTA).
MECHANICAL CHARACTERIZATION
mechanical
STRESS AND DEFORMATION IN DAILY USE
characterization
PLASTIC AND RUBBER• Rigid plastics• Flexible plastics• Elastomers• Fibers• Films
METALS• Thin metallic samples • Flexible samples• Metallic foils
RSA-G2 is an advanced platform for mechanical analysis of solids.
It is capable of applying a variety of deformation types and collect material parameters, providing detailed information about material performance characteristics.
The instrument includes a convection oven for precise and accurate temperature control that allows to perform test:
• at room temperature
• in isothermal temperature
• in temperature ramp
• in air or in inert atmosphere (argon or nitrogen gas)
SOLID ANALYSER RSA-G2, TA INSTRUMENTS
• Modulus of Elasticity • Complex Modulus • Storage and Loss Moduli • Damping properties • Compliance • Frequency effects• Creep and recovery• Stress Relaxation• Glass transition
• Orientation effects• Stress-Strain curves• Dynamic Fatigue• Toughness• Viscoelasticity of materials• Temperature effect on mechanical properties• Thermal transitions
RSA-G2 SPECIFICATIONS
MINIMUM FORCE 0.0005 N
MAXIMUM FORCE 35 N
FORCE RESOLUTION 0.00001 N
DYNAMIC DISPLACEMENT RANGE ± 0.00005 to ± 1.5 mm
DISPLACEMENT RESOLUTION 1 nm
MODULUS RANGE 103 to 3∙1012 Pa
MODULUS PRECISION ±1%
FREQUENCY RANGE 2∙10-5 to 100 Hz
TEMPERATURE RANGE Room Temperature to 500°C
HEATING/COOLING RATE 0.1 to 60°C/min
ISOTHERMAL STABILITY ± 0.1°C
BENDING DUAL AND SINGLE CANTILEVER
COMPRESSION TRACTION
TO T H E F U T UR
ECRO
SSROADS
2016 AND THE MILESTONE OF 40 YEARS OF BUSINESS
Founded as a manufacturing workshop, in the course of time experienced a
constant evolution, that led the company to the creation of strategic alliances
with multinationals.
Welding and special processes are its core competences and the expertise
reached, always more specialized, contributed to make ECOR Research the
company it is today: increasingly oriented to the applied research world.
Aiming at the diversification of its markets and at reaching new goals, in a few
years has achieved ambitious certifications in Aerospace&Defense field and the
accreditation of important players.
Enabling Technologies and Research are the words that drive ECOR Research
strategies, whose production model is evolving with success towards an
integrated system of production and development.
aerospace & defenseintegrated simulation advanced mechanics food industry
aerospace & defenseintegrated simulation advanced mechanics food industry
In addition, we can simulate the in service conditions to understand and analyse the material behaviour during its lifetime.
Bologna AirportGuglielmo Marconi
Bologna
Modena
Ca’di Sola
Castelvetrodi Modena
A14 >>Ancona
<< A14Milano
Modena Sud
A22 << Brennero
Fire
nze
<< A
1
A13
>> P
adov
a
CONTACT
Ing. Riccardo Franci
Tel. +39 059 702257
The Ecor International Campus
Ecor Research S.p.A. Division
Strada Statale 569, 54 41014 Castelvetro di Modena (Modena) - Italy
Tel. +39 059 702257
ecorcampus.com - [email protected]
clau
diav
icin
elli.
com
gra
phic
des
ign
mechanicalcharacterization
mechanical
mechanicalcharacterization
Production SiteSchio (Vi)
LaboratoryCastelvetro di Modena (Mo)
Research CenterCastelvetro di Modena (Mo)