Mechanical Engineering Department

Dr. Jivraj Mehta Institute of Technology, Mogar,

Anand

Page 1 of 2

DJMIT Academic Year: 2015-16

Name of Teacher : MR.SANJAY PANCHAL/MR.RAJESH PANCHAL

Subject Name (Code) : WORKSHOP PRACTICE (2110012)

Semester/Division (Dept) : 2ND

(CIVIL)

Subject Shared with : MR.RAJESH

PANCHAL

Theory/ Tutorial/ Practical: Practical Days:

THURSDAY,SATURDAY

Hrs./Week:04

LESSON PLANNING

Sr. Name of Topic Hrs.

Allotted

Planned

Date

Actual

Date

Teaching

Aid Code

Remarks

1 Introduction to various shops / sections and workshop layouts

4 28/1/2016 5

2 Safety norms to be followed in a workshop should be conveyed to

students

4 11/2/2016 5

3 Demonstration of hand tools 4 25/2/2016 5

4 power tools, machine tools 4 10/3/2016 5

5 basic measuring instruments 4 26/3/2016 5

6 materials 4 31/3/2016 5

7 Marking and measurement in Carpentry

4 7/4/2016 5

8 Fitting, Smithy 4 16/4/2016 5

9 Welding 4 28/4/2016 5

10 Tin smithy 4 30/4/2016 5

11 Plumbing and Machine shop.

4 5/5/2016 5

12 full sectional view 4 12/5/2016 5

REFERENCES:

Sr. Name of Book Author/s Publication Details

1 Mechanical Workshop Practice K C John PHI Learning

2 Workshop Technology Vol. 1 and

2

Raghuvanshi B.S. Dhanpat Rai & Sons

3 Workshop Technology Chapman W.A. J and

Arnold

E. Viva low priced student

edition

Mechanical Engineering Department

Dr. Jivraj Mehta Institute of Technology, Mogar,

Anand

Page 2 of 2

TEACHING AID CODE

1. O.H.P. 2. L.C.D. Projector 3. Model

4. Chart 5. Other

Note: Remark column is useful to write for covering of slippage or for remedial plan.

Sign. of Subject Teacher Sign. of HOD

Mechanical Engineering Department

Dr. Jivraj Mehta Institute of Technology, Mogar,

Anand

Page 1 of 2

DJMIT Academic Year: 2015-16

Name of Teacher : MR.SANJAY PANCHAL/MR.RAJESH PANCHAL

Subject Name (Code) : WORKSHOP PRACTICE (2110012)

Semester/Division (Dept) : 2ND

(MECHANICAL)

Subject Shared with : MR.RAJESH PANCHAL

Theory/ Tutorial/ Practical:

Practical

Days:

MONDAY,TUESDAY,WEDNESDAY,FRIDAY

Hrs./Week:04

LESSON PLANNING

Sr. Name of Topic Hrs.

Allotted

Planned

Date

Actual

Date

Teaching

Aid Code

Remarks

1 Introduction to various shops / sections and workshop layouts

4 28/1/2016 5

2 Safety norms to be followed in a workshop should be conveyed to

students

4 8/2/2016 5

3 Demonstration of hand tools 4 15/2/2016 5

4 power tools, machine tools 4 22/2/2016 5

5 basic measuring instruments 4 29/2/2016 5

6 materials 4 8/3/2016 5

7 Marking and measurement in Carpentry

4 15/3/2016 5

8 Fitting, Smithy 4 22/3/2016 5

9 Welding 4 30/3/2016 5

10 Tin smithy 4 5/4/2016 5

11 Plumbing and Machine shop.

4 12/4/2016 5

12 full sectional view 4 18/4/2016 5

REFERENCES:

Sr. Name of Book Author/s Publication Details

1 Mechanical Workshop Practice K C John PHI Learning

2 Workshop Technology Vol. 1 and

2

Raghuvanshi B.S. Dhanpat Rai & Sons

3 Workshop Technology Chapman W.A. J and

Arnold

E. Viva low priced student

edition

Mechanical Engineering Department

Dr. Jivraj Mehta Institute of Technology, Mogar,

Anand

Page 2 of 2

TEACHING AID CODE

1. O.H.P. 2. L.C.D. Projector 3. Model

4. Chart 5. Other

Note: Remark column is useful to write for covering of slippage or for remedial plan.

Sign. of Subject Teacher Sign. of HOD

Mechanical Engineering Department

Dr. Jivraj Mehta Institute of Technology, Mogar,

Anand

Page 1 of 3

DJMIT Academic Year: 2015-16

Name of Teacher : PROF.YAGNESH SHRIMALI/ PROF.AMIT PATEL

Subject Name (Code) : ENGINEEERING GRAPHICS (2110013)

Semester/Division (Dept) : 2ND

(CIVIL)

Subject Shared with : PROF.AMIT PATEL

Theory/ Tutorial/ Practical: Theory Days:

MONDAY,TUESDAY,THURSDAY

Hrs./Week:03

LESSON PLANNING

Sr. Name of Topic Hrs.

Allotted

Planned

Date

Actual

Date

Teaching

Aid Code

Remarks

1. Introduction to Engineering Graphics: :

i. Drawing

instruments and accessories, BIS – SP 46

1 28/1/2016 5

ii. Use of plane scales, Diagonal Scales

and Representative Fraction

1 1/2/2016 5

2. Projections of Planes:

i. Projections of planes (polygons,

circle and ellipse)

2 2/2/2016 5

ii. its inclination to one reference plane and with two reference planes

1 4/2/2016 5

iii. Concept of auxiliary plane 1 8/2/2016 5

iv. method for projections of the plane 2 9/2/2016 5

3.Projections of Solids and Section of Solids:

i. Classification of solids

1 11/2/2016 5

ii. Projections of solids (Cylinder, Cone, Pyramid and Prism)

1 15/2/2016 5

iii. Projections of solids along with frustum with its inclination to one

reference plane

2 16/2/2016 5

iv. Projections of solids two reference

planes

1 18/2/2016 5

v. true shape of the section 1 22/2/2016 5

4. Engineering Curves:

i. Classification and application of Engineering Curves

1 23/2/2016 5

Mechanical Engineering Department

Dr. Jivraj Mehta Institute of Technology, Mogar,

Anand

Page 2 of 3

ii. Construction of Conics 1 25/2/2016 5

iii. Cycloid Curves 1 29/2/2016 5

iv. Involutes 1 1/3/2016 5

v. Spirals along with normal and

tangent to each curve

2 3/3/2016 5

5. Projections of Points and Lines

i. Introduction to principal

planes of projections

1 8/3/2016 5

ii. Projections of the points located in

same quadrant and different quadrants

1 10/3/2016 5

iii. Projections of line with its inclination

to one reference plane

1 14/3/2016 5

iv. , Projections of line with with two

reference planes

1 15/3/2016 5

v. True length and inclination with the

reference planes

2 17/3/2016 5

6.Orthographic Projections:

i. Fundamental of projection along with classification

2 21/3/2016 5

ii. Projections from the pictorial view of the object on the principal planes for view from

front

2 22/3/2016 5

iii. top and sides using first angle

projection method and third angle projection method

2 28/3/2016 5

iv. full sectional view 1 29/3/2016 5

7.Isometric Projections and Isometric View or Drawing:

i. Isometric Scale 1 31/3/2016 5

ii. Conversion of orthographic views

into isometric projection

2 4/4/2016 5

iii. Conversion of orthographic views into isometric projection

3 5/4/2016 5

REFERENCES:

Sr. Name of Book Author/s Publication Details

1 Elementary Engineering Drawing N.D.Bhatt Charotar Publishing House,

Anand

Mechanical Engineering Department

Dr. Jivraj Mehta Institute of Technology, Mogar,

Anand

Page 3 of 3

2 A text book of Engineering

Drawing

R.K.Dhawan S.Chand & Company Ltd.,

NewDelhi

3 A text book of Engineering

Drawing

P.S.Gill S.K.Kataria & sons

4 Engineering Drawing Agrawal and C M

Agrawal Tata McGraw Hill, New

Delhi

TEACHING AID CODE

1. O.H.P. 2. L.C.D. Projector 3. Model

4. Chart 5. Other

Note: Remark column is useful to write for covering of slippage or for remedial plan.

Sign. of Subject Teacher Sign. of HOD

Mechanical Engineering Department

Dr. Jivraj Mehta Institute of Technology, Mogar,

Anand

Page 1 of 2

DJMIT Academic Year: 2015-16

Name of Teacher : PROF. MAHESH CHAVDA

Subject Name (Code) : ENGINEERING GRAPHICS(2110013)

Semester/Division (Dept): 1ST ( MECHANICAL ) Subject Shared with : PROF.DARSHAN

GAJDHAR

Theory/ Tutorial/ Practical: Theory Days: 2 Hrs./Week: 2

LESSON PLANNING

Sr. Name of Topic Hrs.

Allotted

Planned

Date

Actual

Date

Teaching

Aid Code

Remarks

1. Introduction :

1 INTRODUCTION TO ENGINEERING

GRAPHICS:

1 Other

2 Drawing instruments and accessories 1 Other

3 BIS – SP 46 1 Other

4 Use of plane scales and diagonal scales

1 Other

5 Representative Fraction 2 Other

2 ORTHOGRAPHIC PROJECTIONS: Other

6

Principle of projection, Principal planes of

projection

2 Other

7

Projections from the pictorial view of the

object on the principal planes for View

from Front

1 Other

8

View from Top and View from Side using

first angle projection method and third

angle projection method

1 Other

9 Full Sectional View 1 Other

3 ISOMETRIC PROJECTIONS AND

ISOMETRIC VIEW OR DRAWING:

1 Other

10 Isometric Scale,

11 Conversion of orthographic views into

Mechanical Engineering Department

Dr. Jivraj Mehta Institute of Technology, Mogar,

Anand

Page 2 of 2

isometric projection

12 Isometric view or drawing.

REFERENCES:

Sr. Name of Book Author/s Publication Details

1 Modern Refrigeration and Air-

conditioning Desai P.S Khanna Publishers

2 Refrigeration and Air Conditioning Manohar Prasad Prentice Hall of India PVT Ltd

3 Refrigeration and Air Conditioning Jordon and Prister Tata Mc Graw Hill

4 ‘Refrigeration and Air-

Conditioning

S C Arora & S Domkundwar

Dhanpat Rai

Sons

TEACHING AID CODE

1. O.H.P. 2. L.C.D. Projector 3. Model

4. Chart 5. Other

Note: Remark column is useful to write for covering of slippage or for remedial plan.

Sign. of Subject Teacher Sign. of HOD

Sr. No.Proposed

Date

Lecture

Hours

Total Hours

RequiredRemarks

System of Linear Equations & Matrices

1 Introduction of the subject defination of matrics 02-01-16 1

2 Introduction of linear equation augmented matrix with example 02-03-16 1

3 Elementry row echelon form 4/2/2016 & 8/2/2016 2

4 Reduced row echelon form 10/2/2016 & 11/2/2016 2

5 Gauss elimination method and condition of consistant and inconsistance

system

15/2/2016 & 17/2/2016 2

6 Gauss Jordan method 18/2/2016 1

7 Inverse of a matrix by row operation 22/2/2016 1

8 solution of system using inverse 24/2/2016 & 25/2/2016 2

9 Rank by determinant and raw operation 29/2/2016 1

10 Inverse by determinant 2/3/2016 & 3/3/2016 2

11 Row space,column space and null space 03-07-16 1

12 Linear Transformation & Eigen Value & Eigen Vector

13 Introductin of eigen value and eigen vector 9/3/2016 & 10/3/2016 2

14 Properties of eigen value and eigen vector 14/3/2016 1

15 Cayley Hemiltonian theorm 16/3/2016 & 17/3/2016 2

16 Diagonalization of matrix,Algebric multiplicity if a eigen value 21/3/2016 1

17 linear transformation from Rn to Rm 23/3/2016 & 28/3/2016 2

18 Linear opration properties of L.T 31/3/2016 1

19 Matrix represtation of L.T,similar matrix 4/4/2016 & 6/4/2016 2

20 Linear Combination & Linear Independence

21 Introduction of vector and vector space and its properties 04-07-16 1

22 Sub space and its properties 11/4/2016 & 13/4/2016 2

23 Linearly dependence and independence 14/4/2016 & 18/4/2016 2

24 Expansion of Basis 20/4/2016 1

25 Linealy span of a matrix 21/4/2016 & 25/4/2016 2

26 Vector Function

27 Vector function and differntiation 02-03-16 1

28 Arc length,curvature 02-04-16 1

29 Gradient of a scalar function 02-10-16 1

30 Directional Derivative of a scalar function 11/2/2016 & 17/2/2016 2

31 Divergence and curls of a scalar function 18/2/2016 1

32 Innear Product Space

34 Orthogonal set,normalization 24/2/2016 & 25/2/2016 2

35 Gram schmidth orthogonalization 2/3/2016 & 3/3/2016 2

36 Orthogonality of inner space 9/3/2016 to 16/3/2016 3

37 least square approximation 17/3/2016 1

UNIT-2 8

UNIT-5 6

UNIT-4 11

DEPARTMENT : ME

Topic Name

UNIT-1 16

UNIT-3 11

DR. JIVRAJ MEHTA INSTITUTE OF TECHNOLOGYMATHEMATICS, APPLIED SCIENCE & HUMANITIES DEPARTMENT

LESSON PLANNING

FACULTY: PROF. RIDDHI PATEL SEMESTER: 2

SUBJECT: VECTOR CALCULUS AND LINEAR ALGEBRA (2110015) ACADEMIC YEAR: 2015-2016

39 Diagonalization of symetric metrix 23/3/2016 & 30/3/2016 2

40 Application of canonical form and quadretic form 31/3/2016 1

41 Vector Calculus

42 line intigral and linear intigral path 04-06-16 1

43 Green's theorm,surface and volume integral 7/4/2016 & 13/4/2016 2

44 stock's theorm,Divergence theorm of raws divergence 20/4/2016 & 27/4/2016 4

59

UNIT-6 7

Subject Coordinator : Prof. Riddhi Patel HOD Maths,Applied Sci. & Humanities Principal

UNIT-4 11

Sr. No.Proposed

Date

Lecture

Hours

Total Hours

RequiredRemarks

1 Who is a Contributor

2 2 hours Theory and practice exercises based on Contributor Personality Program Workbook 2.2.16 1

3 (Vol I) 2.2.16 1

4 1 hour Presentations and Projects 4.2.16 1

5 The Contributor’s identity

6 2 hours Theory and practice exercises based on Contributor Personality Program Workbook 9.2.16 1

7 (Vol I) 9.2.16 1

8 1 hour Presentations and Projects 11.2.16 1

9 Embarking on the journey to contributorship

10 2 hours Theory and practice exercises based on Contributor Personality Program Workbook 16.2.16 1

11 (Vol I) 16.2.16 1

12 1 hour Presentations and Projects 18.2.16 1

13 Design Solutions

14 2 hours Theory and practice exercises based on Contributor Personality Program Workbook 23.2.16 1

15 (Vol I) 23.2.16 1

16 1 hour Presentations and Projects 25.2.16 1

17 Design Solutions

18 2 hours Theory and practice exercises based on Contributor Personality Program Workbook 23.2.16 1

19 (Vol I) 23.2.16 1

20 1 hour Presentations and Projects 25.2.16 1

21 Resume Building

22 2 hours for Concepts, Tools, and Techniques 1.3.16 2

23 4.3.16 1

24 2 hours for Projects 8.3.16 1

25 Group Discussions (GDs)

26 2 hours for Concepts, Tools, and Techniques 8.3.16 1

27 11.3.16 1

28 2 hours for Projects and Practice 15.3.16 2

29 Interview Skills

30 2 hours for Concepts, Tools, and Techniques 18.3.16 1

31 22.3.16 2

32 2 hours for Projects and Practice 29.3.16 1

27TOTAL

Subject Coordinator: Prof. Mihir Trivedi HOD Maths,Applied Sci. & Humanities Principal

UNIT-13 4

UNIT-14 4

UNIT-6 3

UNIT-7 3

UNIT-15 4

UNIT-8 3

DR. JIVRAJ MEHTA INSTITUTE OF TECHNOLOGYMATHEMATICS, APPLIED SCIENCE & HUMANITIES DEPARTMENT

LESSON PLANNING

FACULTY: PROF. MIHIR TRIVEDI SEMESTER: II

SUBJECT: CPD (2990001) ACADEMIC YEAR: 2015-2016

DEPARTMENT : MECHANICAL

Topic Name

UNIT-1 3

UNIT-2 3