Media Converters - Belcom

About OT Systems

Industrial Ethernet & Networking Products

“ OT Systems is a global leading company in security, surveillance and communication application. Founded in early 2000s by a team of internationally experienced security industry professionals, the team commits to offer high-quality and value-based transmission devices, world-class support, technical consulting and pre- and after-sales service. With the team's extensive experience and expertise in the industry, OT Systems' comprehensive range of products are specially designed for security, surveillance and industrial automation applications. No matter it is Network Switches, POE, POC, Media Converters, Ethernet Extensions, HD-SDI, Audio, Video and Data Transmission products, the company's in-house research and development team focuses on innovative and reliable products designed to meet the changing demands of the market.

Whether you are starting up a new network or migrating from older analog or serial technologies to IP, OT Systems have Ethernet transmission products that fit your applications.

Our ET-Series / EC-Series Ethernet and Networking products are right fit solutions for expanding and optimizing network performance in various media, while offering the best price-to-performance ratio and suit various types of Ethernet applications requiring industrial grade products.

Media Converters

Network Switches

PoE Switches

Ethernet Extension

1

Ethernet Extension

Ethernet over CoaxEoC with Power

ET1100CP

Contents

Industrial Microtype 10/100Base-TX Ethernet Over Coax Converters with PoE & PoC4

Ethernet over UTPEoUTP with Power ET1100UPp Industrial 10/100Base-TX Ethernet over UTP Extender with PoE+ & PoW18

EoUTP

ET1100U Industrial 10/100Base-TX Ethernet over UTP Extender20

EoCET1100C2 Industrial 10/100Base-TX Ethernet plus CVBS Over Coax Converters14ET1100C Industrial Microtype 10/100Base-TX Ethernet Over Coax Converters16

ET1100CPp Industrial 10/100Base-TX Ethernet Over Coax Converter with PoE+ & PoC 6ET1200CPp-RS4 Receiver of 4-port Coax to 1-port 10/100/1000Base-TX Ethernet Switch with PoC8ET4200CPp-RS8 Receiver of 8-port Coax to 4-port 10/100/1000Base-TX Ethernet Switch with PoC10ET4200CPp-RS16 Receiver of 16-port Coax to 4-port 10/100/1000Base-TX Ethernet Switch with PoC12

Media Converters

Fast Ethernet Media ConvertersET1111 Industrial Microtype 10/100Base-TX to 100Base-FX Ethernet Media Converter22ET1111H Hardened Microtype 100Base-TX to 100Base-FX SFP Ethernet Media Converter24

Gigabit Media Converters

ET1212H Hardened Microtype 1000Base-TX to 1000Base-FX SFP Ethernet Media Converter28EC1212 Econ-line 10/100/1000Base-TX to 1000Base-X Ethernet Media Converter30

Multi-port Media Converters

ET8181 Industrial Rack-mount 8/16-port 10/100Base-TX to 8/16-port 100Base-FX SFP Ethernet

Media Converter

38ET161161

EC1111 Econ-line 10/100Base-TX to 100Base-FX Ethernet Media Converter26

Network Switches

Unmanaged Switches

ET2111 Industrial Unmanaged 2-port 10/100Base-TX + 1-port 100Base-FX Ethernet Switch40ET2281H Hardened Unmanaged 8-port 100Base-FX SFP + 2-port 10/100/1000Base-T/SFP

Combo Optical Ethernet Switch42

ET22161 Unmanaged 16-port 100Base-FX SFP + 2-port 10/100/1000Base-T Optical Ethernet Switch44ET22241 Unmanaged 24-port 100Base-FX SFP + 2-port 10/100/1000Base-T/SFP Combo Optical

Ethernet Switch46

EC8200 Econ-line Unmanaged 8-port 10/100/1000Base-T Ethernet Switch48

PoE Media Converters ET1111P Industrial 10/100Base-TX to 100Base-FX Ethernet Media Converter with PoE32ET1111PpH Hardened 100Base-TX to 100Base-FX SFP Ethernet Media Converter with PoE+34ET1212PpH Hardened 1000Base-TX to 1000Base-FX SFP Ethernet Media Converter with PoE+36

2

PoE Switches

Unmanaged Network Switches

ET4111Pp Industrial Unmanaged 4-port 10/100Base-TX + 1-port 100Base-FX SFP Ethernet Switch with PoE+

56

IP CCTV Self-Configured Switch

ET4222PpH Hardened IP CCTV Self-Configured 4-port 10/100/1000Base-T + 2-port 1000Base-FX SFP Ethernet Switch with PoE+

68

Managed Network Switches

ET8122MPp Industrial Managed 8-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Ethernet Switch with PoE+

70

ET16122MPp Managed16-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Ethernet Switch with PoE+

72

ET24122MPp Managed 24-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Ethernet Switch with PoE+

74

ET8122PpH Hardened Unmanaged 8-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Ethernet Switch with PoE+

58

Accessories

PoE Injector & Splitter

ET-INJ30 Hardened Gigabit 1-port Ethernet Input + 1-port PoE+ Output Injector76ET-SPT12V Hardened Gigabit 1-port PoE+ In + 1-port Ethernet Data Out PoE Splitter78

Racks & Chassis

MR-C10 19" Rack for Micro-type Products80

SFP Modules

SFP Modules83

ET-C12 12-slot 19" Rack Mount Chassis for ET Series81EC-C14 19" Rack Mount Chassis for EC1111 and EC1212 series units, 2U, 14 empty slots,

with PSU, 110-220VAC input82

ET16122Pp Unmanaged 16-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Ethernet Switch with PoE+

60


62

EC9100P Econ-line Unmanaged 8-port 10/100Base-TX (PoE) + 1-port 1000Base-T Ethernet Switch64EC5100P Econ-line Unmanaged 4-port 10/100Base-TX (PoE) + 1-port 100Base-TX Ethernet Switch66

Managed Switches

ET8242M Industrial Managed 8-port 10/100/1000Base-T/SFP Combo + 4-port 1000Base-FX SFP Ethernet Switch

50

ET16122M Managed 16-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Ethernet Switch52ET24122M Managed 24-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Ethernet Switch54

3

ET1100CP Series Industrial Microtype 10/100Base-TX Ethernet Over Coax Converters with PoE & PoC

Ordering Information

Model Description

ET1100CP-T-MT

ET1100CP-R-MT

Transmitter of 10/100 Base -TX Ethernet Over Coaxial with PoE & PoC

Receiver of 10/100 Base -TX Ethernet Over Coaxial with PoE & PoC

GS60A48 60W/1.25A 48VDC Power Supply. Open wire for Terminal Block. Power Supply is to be purchased separately.

Power Options

PoCPoE1CFeatures

General Ethernet Extension: Security Link over Coax Support PoE (15.4W) and Power over Coax Constant Data Rate: 36Mbps/21Mbps(Downlink), 11Mbps/3Mbps(Uplink) Maximum distance: 500m over Coax (RG-59/U) Dip Switch for selecting distance 500m/300m Support Auto MDI/MDI-X function Microtype fits within most camera housing -10°C to 60°C (14°F to 140°F) operating temperature Accept 48VDC external power input or PoE power input from RJ45 port Built-in Surge Protection

Warranty 5-Year Warranty

1E

Typical Application

Eth

erne

t Ext

ensi

on

UTP UTP

PoE EthernetUp to 500m

PoEIP Camera

Coaxial CableET1100CP-T-MT ET1100CP-R-MT

Network Switch

DC 48VPower Supply

www.ot-systems.com1

Eth

erX

tra

Eth

erne

t E

xten

sion

4

EthernetStandards:

Cabling:

Maximum Distance:Connector:

IEEE802.3 10BASE-T IEEE802.3u 100BASE-TXIEEE802.3af Power over Ethernet 10Base-T: Cat3,4,5 or above 100Base-TX: Cat5 or aboveCat5 UTP up to 100m1 x RJ45

Electrical and MechanicalInput Power:Power Consumption:

LED Indicators: Power: Coax Link: Act: PoC:PoE: Standard: Port: Mode:

Max. Power Per Port:

Dimensions (WxDxH):Weight:Casing:

48-57VDC (2 pin connector) or PoE3W (TX/RX) w/o PoE24W (TX/RX) when PoC in use

Power StatusCoax ConnectedData is being transferred in CoaxPower over Coax in use

IEEE 802.3afRJ45 (PD at Rx, PSE at Tx)Alternative B modePositive (VCC+): RJ45 Pin 4, 5Negative (VCC-): RJ45 Pin 7, 812.95W(input) at Rx (Powered Device)15.4W(output) at Tx (Power Sourcing Equipment)33 x 117 x 24.5 mm 300g Aluminum case

Specifications

ET1100CP Series

CoaxialCabling:Connector:Distance:

Data Rate: Downlink (TX to RX)

Uplink (RX to TX)

Technology:

Coaxial cable (75 ohm)1 BNC (female)Up to 300/500m on RG-59/U (Switchselectable) <300m <500m 36Mbps 21Mbps (Constant) (Constant) 11Mbps 3Mbps (Constant) (Constant)SLOC (Security Link over Coax)

EnvironmentalOperating Temperature:

Relative Humidity:

-10°C to 60°C (14°F to 140°F)

0% to 80% non-condensing

Storage Temperature: -40°C to 85°C (-40°F to 185°F)

Regulatory ApprovalsISO9001FCC Part 15 Class AEN55022 Class AEN61000-4-5 (Surge Standards) RJ45: 1kV Coax: 2kV Power: 500V

Eth

erne

t Ext

ensi

on

www.ot-systems.com 2

Due to continuous improvement, all product specifications are subject to change without further notice.OT Systems Ltd., Nov 2014

Eth

erX

tra

Eth

erne

t E

xten

sion

5

ET1100CPp Series Industrial 10/100Base-TX Ethernet Over Coax Converter with PoE+ & PoC


Model Description

ET1100CPp-T

ET1100CPp-R

Transmitter of 10/100 Base -TX Ethernet Over Coaxial with PoE+ & PoC

Receiver of 10/100 Base -TX Ethernet Over Coaxial with PoE+ & PoC


Power Options

PoE+ PoC1C

FeaturesGeneral PoE+ (30W) and Power over Coaxial 802.3af/802.3at Compliant Data Rate up to: 90Mbps (Downlink), 90Mbps (Uplink) Max. Distance: 1Km over Coax (RG-59/U) Compatible with 4-port standalone Receiver & Rack Mount 8/16-port Receiver Accept 48VDC external power input or PoE power input from RJ45 port


1E

Typical Application

Eth

erne

t Ext

ensi

on

UTP UTP

PoE EthernetUp to 1km

PoEIP Camera

Coaxial CableET1100CPp-T ET1100CPp-R

Network Switch

DC 48VPower Supply

www.ot-systems.com1

Eth

erX

tra

Eth

erne

t E

xten

sion

6

EthernetStandards:

Cabling:Maximum Distance:Connector

IEEE802.3 10BASE-T IEEE802.3u 100BASE-TXIEEE802.3af Power over EthernetIEEE802.3at Power over EthernetCat5 or above 100m1xRJ45

Electrical and MechanicalInput Power:

Power Consumption:

Protection: Reverse Polarity:PoE: Standard: Mode: Port: Max. Power per port:

LED Indicators: Power: Ethernet: Coax Data:

Dimensions (WxDxH):Weight:Casing:Mounting Option:

48V~57VDC (Terminal Block) orIEEE802.3at PD8W Max. (PoC not in use)60W Max. (POC in use)

Present

IEEE802.3atBRJ4525.5W max. at RX (Powered Device)30W max. at TX (Power SouringEquipment)

Power StatusSPD, LINK/ACT, PoE(Transmitter)LINK(Transmitter) / READY(Receiver)PoC(Receiver)114 x 82 x 31 mm 250g Aluminum caseWall Mounting

Specifications

ET1100CPp Series

CoaxialCabling:Connector:Distance:Data Rate: Downlink: Uplink:Technology:

Coaxial Cable (75 ohm)1 BNC (female)Up to 1Km on RG-59/U

90Mbps (max.)90Mbps (max.)Power Line Communication(PLC)

EnvironmentalOperating Temperature:Storage Temperature:Relative Humidity:

-10°C to 60°C (14°F to 140°F)-40°C to 85°C (-40°F to 185°F)5% to 95% non-condensing

Regulatory ApprovalsISO9001FCC Part 15 Class AEN55022 Class AEN61000-4-5 (Surge Standards) RJ45: 1kV Coax: 2kV Power: 500V

Eth

erne

t Ext

ensi

on



Eth

erX

tra

Eth

erne

t E

xten

sion

7

ET1200CPp-RS4 Series Receiver of 4-port Coax to 1-port 10/100/1000Base-TX Ethernet Switch with PoC


Model Description

ET1200CPp-RS4 Receiver of 4-port Coax to 1-port 10/100/1000Mbps Ethernet with PoC

GS120A48 120W/2.5A 48VDC Power Supply. Open wire for Terminal Block. GS220A48 220W/4.6A 48VDC Power Supply. Open wire for Terminal Block. Power Supply is to be purchased separately.

Power Options

PoC4CFeatures

General Connecting up to 4 x ET1100CPp-T and IP Cameras 1000Mbps Full-duplex communication Power over Coaxial Data Rate per port up to: 40Mbps (Downlink), 10Mbps (Uplink) Max. Distance: 800m over Coax (RG59/U) Auto MDI/MDI-X for reliable detection and correction for straight-though and crossover cables External 48VDC power input Wall mount installation


1E

Typical Application

Eth

erne

t Ext

ensi

on

DC 48VPower Supply

PTZ PoE IPC

PTZ PoE IPC ET1100CPp-T

ET1100CPp-T

x4 LAN

ET1200CPp-RS4

www.ot-systems.com1

Eth

erX

tra

Eth

erne

t E

xten

sion

8

EthernetStandards:

Cabling:Maximum Distance:Connector

IEEE802.3 10BASE-T IEEE802.3u 100BASE-TXIEEE802.3ab 1000BASE-T Cat5 or above 100m1xRJ45


Protection: Reverse Polarity: Overload Protection:Dimensions (WxDxH):Weight:Casing:Mounting Option:

48~57VDC (Terminal Block)10W Max. w/o PoC250W Max. w/ PoC

PresentPresent156 x 120 x 31mm 500g Aluminum caseWall Mounting

Specifications

ET1200CPp-RS4 Series

CoaxialCabling:Connector:Distance:Data Rate per port:

Technology:

Coaxial Cable (75 ohm)4 BNC (female)800m40Mbps Max.(Downlink),10Mbps Max.(Uplink)Power Line Communication(PLC)



Regulatory ApprovalsISO9001CE EN55022 Class A, FCC part 15 Class ASurge Protection: RJ45: 1kV Coax: 2kV Power: 500V

Eth

erne

t Ext

ensi

on



Eth

erX

tra

Eth

erne

t E

xten

sion

9



Model Description

ET4200CPp-RS8 Receiver of 8-port Coax to 4-port 10/100/1000Base-TX Ethernet Switch with PoC

19” 1U Rack Mount.

100~240VAC input.

Mounting Options

Power Options

Typical Application

Eth

erne

t Ext

ensi

on

PoCCFeatures

E 4 8

General Connecting up to 8 x ET1100CPp-T and IP Cameras With full switching capability 1000Mbps Full-duplex communication Power over Coaxial(Max. 400w total output) Data Rate per port up to: 40Mbps (Downlink), 10Mbps (Uplink) Max. Distance: 800m over Coax (RG59/U) Auto MDI/MDI-X AC power input 19” 1U Rack-mount


PTZ PoE IPC


ET1100CPp-T

x8 LAN

ET4200CPp-RS8

www.ot-systems.com1

Eth

erX

tra

Eth

erne

t E

xten

sion

10

Specifications


Eth

erne

t Ext

ensi

on

EthernetStandards:

Cabling:Maximum Distance:Connector:

IEEE802.3 10BASE-T IEEE802.3u 100BASE-TXIEEE802.3ab 1000BASE-TCat5 or above 100m4 x RJ45


Dimensions (WxDxH):Weight:Casing:Mounting Option:

100-240VAC Input16W Max. without PoC500W Max. with PoC483 x 300 x 44mm (1RU) 4Kg Aluminum caseRack Mount


Technology:



0°C to 50°C (14°F to 122°F)-20°C to 75°C (-4°F to 167°F)5% to 90% non-condensing

Regulatory ApprovalsISO9001EN55022 Class A, FCC part 15 Class ASurge Protection: RJ45: 1kV Coax: 2kV Power: 500V



Eth

erX

tra

Eth

erne

t E

xten

sion

11


Typical Application

Eth

erne

t Ext

ensi

on Features

PoCCE 4 16

General Connecting up to 16 x ET1100CPp-T and IP Cameras With full switching capability 1000Mbps Full-duplex communication Power over Coaxial(Max. 800w total output) Data Rate per port up to: 40Mbps (Downlink), 10Mbps (Uplink) Max. Distance: 800m over Coax (RG59/U) Auto MDI/MDI-X AC power input 19” 1U Rack-mount



Model Description

ET4200CPp-RS16

ET4200CPp-RS16P

Receiver of 16-port Coax to 4-port 10/100/1000Base-TX Ethernet Switch with PoC

Receiver of 16-port Coax to 4-port 10/100/1000Base-TX Ethernet Switch with High Power PoC


100-240VAC input.

Mounting Options

Power Options

PTZ PoE IPC


ET1100CPp-T

x16 LAN

ET4200CPp-RS16

www.ot-systems.com1

Eth

erne

t E

xten

sion

Eth

erne

t E

xten

sion

12


Eth

erne

t Ext

ensi

on

EthernetStandards:

Cabling:Maximum Distance:Connector:

IEEE802.3 10BASE-T IEEE802.3u 100BASE-TXIEEE802.3ab 1000BASE-T Cat5 or above 100m4 x RJ45

Electrical and MechanicalInput Power:Power Consumption: ET4200CPp-RS16: ET4200CPp-RS16P:Protection: Overload Protection:Dimensions (WxDxH):Weight:

Casing:Mounting Option:

100-240VAC input32W Max. without PoC500W Max. with PoC1000W Max. with PoC

Present483 x 300 x 44mm (1RU) ET4200CPp-RS16: 4KgET4200CPp-RS16P: 4.5Kg Aluminum caseRack Mount

Specifications


Technology:




Regulatory ApprovalsISO9001EN55022 Class A, FCC part 15 Class ASurge Protection: RJ45: 1kV Coax: 2kV Power: 500V



Eth

erX

tra

Eth

erne

t E

xten

sion

13

ET1100C2 Series Industrial 10/100Base-TX Ethernet plus CVBS Over Coax Converters


Model Description

ET1100C2-T

ET1100C2-R

Transmitter of 10/100 Base -TX Ethernet plus CVBS Over Coaxial

Receiver of 10/100 Base -TX Ethernet plus CVBS Over Coaxial

ET-PA/12V 1.25A 12VDC Power Adaptor. Open wire for Terminal Block. Power Adaptor is included for all sales.

Power Options

2CFeatures

General Ethernet Extension : Security Link over Coax Simultaneous transmission of IP and CVBS over single coaxial cable Constant Data Rate: 36Mbps(Downlink) / 11Mbps(Uplink) Maximum distance: 300m over Coax(RG-59/U) Support Auto MDI/MDI-X -10°C to 60°C Operating Temperature


1E

Typical Application

Eth

erne

t Ext

ensi

on

UTPEthernet

Up to 300m

Coaxial CableET1100C2-R

UTPEthernet

ET1100C2-T

DVR

NVRIP Camera

Coax CoaxCVBS CVBS

AnalogueCamera

www.ot-systems.com1

Eth

erX

tra

Eth

erne

t E

xten

sion

14

EthernetStandards:

Cabling: 10Base-T 100Base-TXMaximum Distance:Connector

IEEE802.3 10BASE-T IEEE802.3u 100BASE-TXIEEE802.3x Flow Control

Cat 3, 4, 5 or aboveCat 5 or above 100m1xRJ45

Specifications

ET1100C2 Series

CoaxialCabling:Connector:Transmission Distance:Data Rate: Downlink: Uplink:Technology:

Coaxial Cable (75 ohm)1 BNC (female)Up to 300m on RG-59/U

36Mbps@300m (Constant)11Mbps@300m (Constant)SLOC (Security Link over Coax)

Regulatory ApprovalsISO9001FCC Part 15 Class AEN55022 Class A RoHSEN61000-4-5 (Surge Standards) RJ45: 1kV Coax: 2kV Power: 500V

VideoNo. of Channel:Colour Systems:In/Output Impedance:In/Output Connector:In/Output:

1NTSC, PAL75Ω1 BNC (female)1Vp-p

Electrical and MechanicalInput Power:Power Consumption:Protection: Reverse Polarity: Overload:LED Indicators: Power: Ethernet: Video:

Coax:Dimensions (WxDxH):Weight:Casing:Mounting Option:

12VDC @ 200mA Max2.4W Max

PresentPresent

Power StatusLink/Activity, SpeedVideo IN (Tx)Video OUT (Rx)Link, Activity70 x 97 x 23.6 mm 200g Aluminum caseWall Mounting



Eth

erne

t Ext

ensi

on



Eth

erX

tra

Eth

erne

t E

xten

sion

15

Eth

erne

t Ext

ensi

on

www.ot-systems.com1

ET1100C Series Industrial Microtype 10/100Base-TX Ethernet Over Coax Converters


Model Description

ET1100C-T-MT

ET1100C-R-MT

Transmitter of 10/100 Base -TX Ethernet Over Coaxial

Receiver of 10/100 Base-TX Ethernet Over Coaxial

Built-in Wall Mount Bracket. Rack-mountable on 1U rack MR-C10 (Purchase Separately).

ET-PA/12V 1.25A 12VDC Power Adaptor. Open Wire for Terminal Block. Power Adaptor is included for all sales.

Mounting Options

Power Options

1CFeatures

General Ethernet Extension: Security Link over Coax Constant Data Rate: 20Mbps(Downlink) / 3Mbps(Uplink) Maximum distance: 300m over Coax(RG-59/U) Microtype fits within most camera housings -10°C to 60°C (14°F to 140°F) operating temperature Built-in Surge Protection


1E

Typical Application

UTP UTP

Ethernet EthernetUp to 300m

IP Camera

Coaxial CableET1100C-R-MT

Network Switch

NVR

OR

ET1100C-T-MT

Eth

erX

tra

Eth

erne

t E

xten

sion

16

Eth

erne

t Ext

ensi

on



EthernetStandards:

Cabling:


IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX 10BASE-T: Cat3,4,5 or above 100BASE-TX: Cat5 or aboveCat5 UTP up to 100m1 x RJ45

Electrical and MechanicalInput Power:Power Consumption:LED Indicators: Power: Coax: Data:Dimensions (WxDxH):Weight:Casing:Mounting Options:

12VDC Terminal Block2.4W Max. 0.2A@12VDC

Power StatusCoax LinkActivity36.2 x 24.5 x 101 mm 0.1kg (0.25kg with PA)Aluminum caseWall Mount / MR-C10(1U Rack)

Specifications

ET1100C Series

CoaxialCabling:Connector:Distance:Data Rate: Downlink (TX to RX) Uplink (RX to TX)

Coaxial Cable (75 ohm)1 BNC (female)Up to 300m on RG-59/U

20Mbps (Constant)3Mbps (Constant)



Regulatory ApprovalsISO9001FCC Part 15 Class AEN55022 Class A

Eth

erX

tra

Eth

erne

t E

xten

sion

17

ET1100UPp Series Industrial 10/100Base-TX Ethernet over UTP Extender with PoE+ & PoW


Model Description

ET1100UPp-T

ET1100UPp-R

Transmitter of 10/100 Base -TX Ethernet over UTP with PoE+ & PoW

Receiver of 10/100 Base -TX Ethernet over UTP with PoE+ & PoW

Default Wall Mount built-in.


Mounting Options

Power Options

NOTES: (1) Transmission distance may varies with quality and material of Cat5/UTP Cable.

FeaturesGeneral PoE+(30W) and Power over Wire 802.af/802.3at Compliant Data Rate up to: 90Mbps(Downlink), 90Mbps (Uplink) Max. Distance: 600m over Cat5e cable. Support Wall Mount installation -10ºC to 60ºC (14ºF to 140ºF) operating temperature


1E PoE+ PoW1

UTP

Typical Application

Eth

erne

t Ext

ensi

on

UTP UTP

PoE EthernetUp to 600m

PoEIP Camera

UTPET1100UPp-T ET1100UPp-R

Network Switch

DC 48VPower Supply

www.ot-systems.com1

Eth

erX

tra

Eth

erne

t E

xten

sion

18

Accessories


Protection: Reverse Polarity: Power Input Overload:LED Indicators: Power: Ethernet: UTP Data:

PoE: Standard: Port: Max. Power:Dimensions (WxDxH):Weight:Casing:Mounting Options:

48VDC (Terminal block)8W Max. (PoW not in use)60W Max.(PoW in use)

PresentAutomatic Resettable

Power StatusSPD, LINK/ACT, PoE(Transmitter)LINK(Transmitter) / READY(Receiver)PoW(Receiver)ACT

IEEE802.3atRJ4530W Max. (Alternative B mode)114 x 72 x 31 mm0.25KgMini Aluminum caseWall Mount

Specifications

ET1100UPp Series

Regulatory ApprovalsISO9001FCC Part 15, Class AEN55022:2006+A1: 2007Surge Protection RJ45: 1KV Power: 0.5KV UTP: 2kV



EthernetStandards:

Ethernet: Connector: Cabling: Maximum Distance:UTP: Cabling: Connector: Distance: Data Rate: Downlink: Uplink: Technology:

IEEE802.3 10BASE-T IEEE802.3u 100BASE-TXIEEE802.3af Power over Ethernet IEEE802.3at Power over Ethernet

1xRJ45Cat5 or above100m

Cat5 or above1xRJ45Up to 600m on Cat5e Cable

90Mbps(Max.)90Mbps(Max.)Power Line Communication(PLC)

Eth

erne

t Ext

ensi

on



Eth

erX

tra

Eth

erne

t E

xten

sion

19

ET1100U Series Industrial 10/100Base-TX Ethernet over UTP Extender


Model Description

ET1100U-T

ET1100U-R

Transmitter of 10/100 Base -TX Ethernet over UTP

Receiver of 10/100 Base -TX Ethernet over UTP

Default Wall Mount built-in.


Mounting Options

Power Options

NOTES: (1) Transmission distance may varies with quality and material of Cat5/UTP Cable.

FeaturesGeneral Data Rate up to: 90Mbps(Downlink), 90Mbps (Uplink) Max. Distance: 600m over Cat5e cable. Support Auto MDI/MDI-X Support Wall Mount installation -10ºC to 60ºC (14ºF to 140ºF) operating temperature


1E 1

UTP

Typical Application

Eth

erne

t Ext

ensi

on

UTP UTP

EthernetUp to 600m

IP Camera

UTPET1100U-T ET1100U-R

Network Switch

www.ot-systems.com1

Eth

erX

tra

Eth

erne

t E

xten

sion

20

Accessories

Specifications

ET1100U Series

Electrical and MechanicalInput Power:Power Consumption:Protection: Reverse Polarity: Power Input Overload:LED Indicators: Power: Ethernet: UTP Data:

Dimensions (WxDxH):Weight:Casing:Mounting Options:

12VDC (Terminal Block)8W Max.

PresentPresent

Power StatusLINK/ACTSPD(Transmitter) / READY(Receiver)ACT114 x 72 x 31 mm0.2KgMini Aluminum caseWall Mount

Regulatory ApprovalsISO9001FCC Part 15, Class AEN55022:2006+A1: 2007Surge Protection RJ45: 1kV Power: 0.5kV UTP: 2kV



EthernetStandards:

Ethernet: Connector: Cabling: Maximum Distance:UTP: Cabling: Connector: Distance: Data Rate: Downlink: Uplink: Technology:

IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX

1xRJ45Cat5 or above100m

Cat5 or above1xRJ45Up to 600m on Cat5e Cable

90Mbps(Max.)90Mbps(Max.)Power Line Communication(PLC)

Eth

erne

t Ext

ensi

on



Eth

erX

tra

Eth

erne

t E

xten

sion

21

www.ot-systems.com1

ET1111 Series Industrial Microtype 10/100Base-TX to 100Base-FX Ethernet Media Converter


Model Description

ET1111-X-MT Industrial Microtype 10/100Base-TX to 100Base-FX Ethernet Media Converter

1FFeatures

General Converts 10/100BASE-TX to 100BASE-FX Full/Half duplex, Auto-Negotiation Singlemode or Multimode fiber operation Single or Dual-core fiber with SC or ST connectors MDI/MDI-X Auto-Crossover supported Sleek Microtype design, fits within most camera housing Plug-and-Play 12VDC or 24VAC Terminal Block Power inputs -10°C to 60°C (14°F to 140°F) operating temperature


1E

(X) = Wavelengths Fiber Options Max. DistanceLink Budget

A

B

C

D

E

F

G

H

I

J

K

L

Multimode/2-fiber/SC

Singlemode/2-fiber/SC

Multimode/WDM 1-fiber/SC


Singlemode/WDM 1-fiber/SC


Multimode/2-fiber/ST

Singlemode/2-fiber/ST

Multimode/WDM 1-fiber/ST


Singlemode/WDM 1-fiber/ST


14dB

21dB

21dB

21dB

19dB

19dB

14dB

21dB

21dB

21dB

19dB

19dB

2km

20km

2km

2km

20km

20km

2km

20km

2km

2km

20km

20km

1310nm

1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

1310nm

1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm



NOTES: (1) Transmission distance will suffer if additional losses are introduced by the optical connectors, fusions, splices and the fibers within the network.

(2) Operating distance of multimode is limited by the characteristics of the fiber bandwidth.

(3) Please feel free to consult factory for any special requirement and customization

Mounting Options

Power Options

www.ot-systems.com

Med

ia C

onve

rter

sM

edia

Con

vert

ers

22


EthernetStandards:

Processing Type:

Forward Filter Rate:

Cabling:

Maximum Distance:Connector:Address Table Size:

IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX/FX IEEE802.3x Flow ControlStore and forwardHalf-duplex, Full-duplex14,880pps (10Mbps)148,800pps (100Mbps)10BASE-T: Cat5 or above 100BASE-TX: Cat5 or aboveCat5 UTP up to 100m1 x RJ452048 MAC Addresses

Electrical and MechanicalInput Power:Power Consumption:LED Indicators: Power: 10/100TX(Per Port): 100FX(Per Port):Dimensions (WxDxH):Weight:Casing:Mounting Options:

12VDC or 24VAC (Terminal Block)2.4W Max. 0.2A@12VDC

Power StatusLink/Activity, SpeedLink/Activity36.2 x 98 x 24.5 mm0.12Kg (0.22Kg with PA)Aluminum caseWall-mount / MR-C10 1U Rack

Specifications

ET1111 Series

OpticalCabling:

Maximum Distance:

Wavelength:

Connector:

62.5/125µm (Multimode) 9/125µm (Singlemode)2km (Multimode)20km (Singlemode)1310 nm1310/1550nmSC/ST


-10°C to 60°C (14°F to 140°F)-40°C to 85°C (-40°F to 185°F) 0% to 95% non-condensing

MTBF: > 100,000 hours

Regulatory ApprovalsISO9001FCC Part 15, Class AEN55022:2006+A1: 2007 Class AEN 61000-3-2: 2006EN 61000-3-3: 2008EN 55024: 1998 + A1: 2001 + A2: 2003

Typical Application

Unit: mm

UTP UTP

Ethernet Ethernet1 fiber

IP Camera

ET1111-X-MT ET1111-X-MT

www.ot-systems.com

Due to continuous improvement, all product specifications are subject to change without further notice.OT Systems Ltd., Jan 2015

Med

ia C

onve

rter

sM

edia

Con

vert

ers

23

Med

ia C

onve

rter

ET1111H Series Hardened Microtype 100Base-TX to 100Base-FX SFP Ethernet Media Converter


Model Description

ET1111H-S-MT Hardened Microtype 100Base-TX to 100Base-FX SFP Ethernet Media Converter

(S) = SFP option. Please select your SFP on our SFP Options page. SFP module is to be purchased separately.



SFP Options

Mounting Options

Power Options

FeaturesGeneral Converts 100BASE-TX to 100BASE SFP Supports Full/Half duplex Supports external SFP Supports Auto MDI/MDI-X Sleek Microtype design, fits within most camera housing Extensive LED indicators for network diagnostics Environmentally hardened -40°C to 75°C (-40°F to 167°F) operating temperature


1E 1

SFP

Hardened

Typical Application

UTP UTP


IP Camera

ET1111H-S-MT ET1111H-S-MT

www.ot-systems.com1

Med

ia C

onve

rter

s

24

Accessories

Med

ia C

onve

rter

EthernetStandards:

Processing Type:Forward Filter Rate:Cabling:Maximum Distance:Connector:Optical Port:

IEEE802.3u 100BASE-TX/FXIEEE802.3x Flow Control Forward148,800pps (100Mbps)100BASE-TX: Cat5 or aboveCat5 UTP up to 100m1 x RJ451 x SFP 100BASE-FX

Electrical and MechanicalInput Power:Power Consumption:LED Indicators: Power: 100TX: SFP:Dimensions (WxDxH):Weight:Casing:Mounting Options:

12VDC (Terminal Block)2.4W Max. 0.2A@12VDC

Power StatusLink/Activity, SpeedLink/Activity36.2 x 117 x 24.5 mm0.15KgMetal CaseWall-mount / MR-C10 1U Rack

Specifications

ET1111H Series


-40°C to 75°C (-40°F to 167°F)-40°C to 85°C (-40°F to 185°F)5% to 95% non-condensing

Regulatory ApprovalsISO9001FCC Part 15, Class AEN55022:2006+A1: 2007 Class ASurge Protection: RJ45: 1kV Power: 500V ESD: 4kV/8kV



Med

ia C

onve

rter

s

25

EC1111 SeriesEcon-line 10/100Base-TX to 100Base-FX Ethernet Media Converter

FeaturesGeneral Convert 10/100BASE-TX to 100BASE-FX Full/Half duplex, Auto-Negotiation Single mode or Multi-mode fiber operation Single or Dual-core fiber with SC connectors MDI/MDI-X Auto Crossover supported Plug-and-Play 0°C to 50°C (32°F to 122°F) operating temperature


1E 1F

1


Model Description

EC1111-X Econ-line 10/100Base-TX to 100Base-FX Ethernet Media Converter


A

B

C

D

E

F







12dB

19dB

16dB

16dB

25dB

25dB

2km

20km

2km

2km

20km

20km

1310nm

1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

Desktop bracket. Rack-Mountable on 2U rack EC-C14 (Purchase Separately).

1A/5VDC Power Adapter with DC Jack. Power Adapter is included for all sales.

NOTES: (1) Transmission distance will suffer if additional losses are introduced by the optical connectors, fusers, splices and the fibers within the network.

(2) Operating distance of multimode is limited by the characteristic of the fiber bandwidth.

(3) Please feel free to contact factory for any special requirement and customization.

Mounting Options

Power Options

www.ot-systems.com

Med

ia C

onve

rter

s

coneline

26

Accessories

EthernetStandards:

Processing Type:


Cabling:


Address Table Size:

IEEE802.3 10BASE-TIEEE802.3u 100BASE-TXIEEE802.3u 100BASE-FXStore-and-ForwardHalf-duplex, Full-duplex14,880pps 148,810pps

(10Mbps)(100Mbps)

10BASE-T Cat5 or above100BASE-TX Cat5 or aboveCat5 Up to 100m1 x RJ45

1024MAC Addresses

Electrical and MechanicalInput Power:Power Consumption:LED Indicators: Power: 10/100TX (Per Port): 100FX (Per Port):Dimensions (WxDxH):Weight:Casing:Mounting Options:

5VDC (DC Socket)2.5W Max, 0.5A@5VDC

Power StatusLink/Activity, Speed, FDXLink/Activity, SD71x105x27mm0.2KgMetal CaseDesktop/EC-C14 2U Rack

Specifications

EC1111 Series

Optical



Regulatory ApprovalsISO9001FCC CE

Cabling: 62.5/125µm (multimode)

Connector: SC

9/125µm (Singlemode)Maximum Distance: 2km (Multimode)

20km (Singlemode)Wavelength: 1310nm

1310/1550nm

2www.ot-systems.com


Med

ia C

onve

rter

s

27

Med

ia C

onve

rter

ET1212H Series Hardened Microtype 1000Base-TX to 1000Base-FX SFP Ethernet Media Converter


Model Description

ET1212H-S-MT Hardened Microtype 1000Base-TX to 1000Base-FX SFP Ethernet Media Converter




SFP Options

Mounting Options

Power Options

FeaturesGeneral Converts 1000BASE-T to 1000BASE SFP Supports Full/Half duplex Supports external 1000BASE SFP Supports Auto MDI/MDI-X Sleek Microtype design, fits within most camera housing Extensive LED indicators for network diagnostics Environmentally hardened -40°C to 75°C (-40°F to 167°F) operating temperature


1E 1

SFP 1G

Hardened

Typical Application

UTP UTP


IP Camera

ET1212H-S-MT ET1212H-S-MT

www.ot-systems.com1

Med

ia C

onve

rter

s

28

Accessories

Med

ia C

onve

rter

EthernetStandards:


IEEE802.3ab 1000BASE-TIEEE802.3az Gigabit FiberIEEE802.3X Flow ControlForward1,488,000pps (1000Mbps)1000BASE-T: Cat5 or aboveCat5 UTP up to 100m1 x RJ451 x SFP 1000BASE-X

Electrical and MechanicalInput Power:Power Consumption:LED Indicators: Power: 1000TX: SFP:Dimensions (WxDxH):Weight:Casing:Mounting Options:

12VDC (Terminal Block)2.4W Max. 0.2A@12VDC

Power StatusLink/Activity, SpeedLink/Activity36.2 x 117 x 24.5 mm0.15KgMetal CaseWall-mount / MR-C10 1U Rack

Specifications

ET1212H Series



Regulatory ApprovalsISO9001FCC Part 15, Class AEN55022:2006+A1: 2007 Class ASurge Protection: RJ45:1kV Power: 500V ESD: 4kV/8kV



Med

ia C

onve

rter

s

29

EC1212 SeriesEcon-line 10/100/1000Base-TX to 1000Base-X Ethernet Media Converter

FeaturesGeneral Convert 10/100/1000BASE-TX to 1000BASE-X Full/Half duplex, Auto-Negotiation Single mode or Multi-mode fiber operation Single or Dual-core fiber with SC connectors MDI/MDI-X Auto Crossover supported Plug-and-Play 0°C to 50°C (32°F to 122°F) operating temperature


1E 1F

1


Model Description

EC1212-X Econ-line 10/100/1000Base-TX to 1000Base-X Ethernet Media Converter


A

B

C

D

E

F







12dB

15dB

8dB

8dB

16dB

16dB

2km

20km

2km

2km

20km

20km

1310nm

1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

Desktop bracket. Rack-Mountable on 2U rack EC-C14 (Purchase Separately).

1A/5VDC Power Adapter with DC Jack. Power Adapter is included for all sales.

NOTES: (1) Transmission distance will suffer if additional losses are introduced by the optical connectors, fusers, splices and the fibers within the network.

(2) Operating distance of multimode is limited by the characteristic of the fiber bandwidth.

(3) Please feel free to contact factory for any special requirement and customization.

Mounting Options

Power Options

www.ot-systems.com

Med

ia C

onve

rter

s

1Gconeline

30

Accessories

EthernetStandards:

Processing Type:


Cabling:


IEEE802.3 10BASE-TIEEE802.3u 100BASE-TXIEEE802.3ab 1000BASE-T

Store-and-ForwardHalf-duplex, Full-duplex14,880pps 148,810pps

(10Mbps)(100Mbps)

10BASE-T Cat5 or above100BASE-TX Cat5 or above

Cat5 Up to 100m1 x RJ451024MAC Addresses

Electrical and MechanicalInput Power:Power Consumption:LED Indicators: Power: 10/100/1000TX(Per Port): 1000FX (Per Port):Dimensions (WxDxH):Weight:Casing:Mounting Options:

5VDC (DC Socket)2.5W Max, 0.5A@5VDC

Power StatusLink/Activity, Speed(100M, 1000M), FDXLink/Activity71x105x27mm0.2KgMetal CaseDesktop/EC-C14 2U Rack

Specifications

EC1212 Series

Optical

IEEE802.3z 1000BASE-XIEEE802.3x Flow Control

1,488,000pps (1000Mbps)

1000BASE-T Cat5 or above




Cabling: 62.5/125µm (multimode)

Connector: SC

9/125µm (Singlemode)Maximum Distance: 2km (Multimode)

20km (Singlemode)Wavelength: 1310nm

1310/1550nm

2www.ot-systems.com


Med

ia C

onve

rter

s

31

Med

ia C

onve

rter

ET1111P Series Industrial 10/100Base-TX to 100Base-FX Ethernet Media Converter with PoE


Model Description

ET1111P-X Industrial 10/100Base-TX to 100Base-FX Ethernet Media Converter with PoE

PoE1FFeatures

General Complies with 802.3af PoE/PSE standard (15.4W) 10/100Mbps-Full/Half-duplex, Auto-negotiation, Auto MDI/MDI-X Full wire-speed forwarding rate 128K bits buffer memory Aluminum case Support Wall-mount installation -10ºC to 60ºC (14ºF to 140ºF) operating temperature


1E


A

B

C

E

G

H

I

K









11dB

17dB

8dB

17dB

11dB

17dB

8dB

17dB

2km

20km

2km

20km

2km

20km

2km

20km

1310nm

1310nm

TX:1310nm/RX:1550nm

TX:1310nm/RX:1550nm

1310nm

1310nm

TX:1310nm/RX:1550nm

TX:1310nm/RX:1550nm


Power Options



www.ot-systems.com1

Med

ia C

onve

rter

s

32

Accessories

Med

ia C

onve

rter

EthernetStandards:

Packet Buffer Memory:Processing Type:Forward Filter Rate:

Cabling:


IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX/FX IEEE802.3af Power over Ethernet128K bitsStore and forward14,880pps (10Mbps)148,810pps (100Mbps)10BASE-T: Cat5 or above 100BASE-TX: Cat5 or aboveCat5 UTP up to 100m1 x RJ45


Protection: Overload: Over Voltage:LED Indicators: Power: 10/100TX(Per Port): 100FX(Per Port): PoE:

PoE: Standard: Port: Max. Power:Dimensions (WxDxH):Weight:Casing:Mounting Options:

48VDC (2 pin terminal block)19.2W, 0.4A@48VDC (PoE in use)2.4W, Max. 0.05A@48VDC (PoE not in use) PresentPresent

Power StatusLink/Activity, SpeedLink/ActivityPD connect/ PD detection/PD disconnect

IEEE802.3afRJ4515.4W Max (Alternative A mode)83 x 70 x 23.6 mm0.2KgAluminum caseWall-mount

Specifications

ET1111P Series

OpticalCabling:

Maximum Distance:

Wavelength:

Connector:




Regulatory ApprovalsISO9001FCC Part 15, Class AEN55022:2006+A1: 2007

Typical Application

UTP UTP

PoE Ethernet1 fiber

DC 48VPower Supply

PoEIP Camera

ET1111P-X ET1111-X-MT



Med

ia C

onve

rter

s

33

ET1111PpH Series Hardened 100Base-TX to 100Base-FX SFP Ethernet Media Converter with PoE+


Model Description

ET1111PpH-S-DR Hardened 100Base-TX to 100Base-FX SFP Ethernet Media Converter with PoE+

(S) = SFP option. Please select your SFP on our SFP Options Page. SFP module is to be purchased separately.

Default DIN-Rail Bracket installed, Wall Mount Bracket is included.

GS60A48 60W/1.25A 48VDC Power Supply. Open Wire for Terminal Block. Power Supply is to be purchased separately.

SFP Options

Mounting Options

Power Options

FeaturesGeneral Converts 100BASE-TX to 100BASE SFP Supports IEEE802.3at PoE+(30W) Supports Full/Half duplex Supports external 100BASE SFP Supports Auto MDI/MDI-X Supports DIN-Rail & Wall-mount installation Extensive LED indicators for network diagnostics Environmentally hardened -40°C to 75°C (-40°F to 167°F) operating temperature


1E 1

SFP PoE

+ Hardened

Typical Application

UTP UTP


IP Camera

ET1111PpH-S-DR ET1111H-S-MT

DC 48VPower Supply

www.ot-systems.com1 www.ot-systems.com

Med

ia C

onve

rter

sM

edia

Con

vert

ers

34

Accessories

EthernetStandards:


IEEE802.3u 100BASE-TX/FXIEEE802.3af Power over Ethernet IEEE802.3at Power over EthernetIEEE802.3x Flow ControlForward148,800pps (100Mbps)100BASE-TX: Cat5 or aboveCat5 UTP up to 100m1 x RJ451 x SFP 100BASE-FX

Electrical and MechanicalInput Power:Power Consumption:PoE: Standard: Port: Max. Power:LED Indicators: Power: 100TX: SFP:Dimensions (WxDxH):Weight:Casing:Mounting Options:

48VDC (Terminal Block)36W Max. 0.75A@48VDC

IEEE802.3atRJ4530W Max per port (Alternative B Mode)

Power StatusLink/Activity, SpeedLink/Activity96 x 80 x 31 mm0.25KgMetal CaseDIN-Rail / Wall-mount

Specifications

ET1111PpH Series

EnvironmentalOperating Temperature:Storage Temperature:

MTBF:

Humidity:

-40°C to 75°C (-40°F to 167°F)-40°C to 85°C (-40°F to 185°F)

> 100,000 hours

Relative 5% to 95% non-condensing

Regulatory ApprovalsISO9001FCC Part 15, Class AEN55022:2006+A1: 2007 Class ASurge Protection RJ45: 1kV Power: 500V ESD : 4kV / 8kV

www.ot-systems.com 2www.ot-systems.com


Med

ia C

onve

rter

sM

edia

Con

vert

ers

35

Med

ia C

onve

rter

ET1212PpH Series Hardened 1000Base-TX to 1000Base-FX SFP Ethernet Media Converter with PoE+


Model Description

ET1212PpH-S-DR Hardened 1000Base-TX to 1000Base-FX SFP Ethernet Media Converter with PoE+




SFP Options

Mounting Options

Power Options

FeaturesGeneral Converts 1000BASE-T to 1000BASE SFP Supports IEEE802.3at PoE+(30W) Supports Full/Half duplex Supports external 1000BASE SFP Supports Auto MDI/MDI-X Supports DIN-Rail & Wall-mount installation Extensive LED indicators for network diagnostics Environmentally hardened -40°C to 75°C (-40°F to 167°F) operating temperature


1E 1

SFP PoE

+ 1GHardened

Typical Application

UTP UTP


IP Camera

ET1212PpH-S-DR ET1212H-S-MT

DC 48VPower Supply

www.ot-systems.com1

Med

ia C

onve

rter

s

36

Accessories

Med

ia C

onve

rter

EthernetStandards:

Processing Type:

Forward Filter Rate:Cabling:Maximum Distance:Connector:Optical Port:

IEEE802.3ab 1000BASE-TIEEE802.3az Gigabit Fiber IEEE802.3af Power over EthernetIEEE802.3at Power over EthernetIEEE802.3x Flow ControlForwardHalf-duplex, Full-duplex1,488,000pps (1000Mbps)1000BASE-T: Cat5 or aboveCat5 UTP up to 100m1 x RJ451 x SFP 1000BASE-X

Electrical and MechanicalInput Power:Power Consumption:PoE: Standard: Port: Max. Power per Port:LED Indicators: Power: 1000TX: SFP:Dimensions (WxDxH):Weight:Casing:Mounting Options:

48VDC (Terminal Block)36W Max. 0.75A@48VDC

IEEE802.3atRJ4530W Max per port (Alternative B Mode)

Power StatusLink/Activity, SpeedLink/Activity96 x 80 x 31 mm0.25KgMetal CaseDIN-Rail / Wall-mount

Specifications

ET1212PpH Series



Regulatory ApprovalsISO9001FCC Part 15, Class AEN55022:2006+A1: 2007 Class ASurge Protection: RJ45: 1kV Power: 500V ESD: 4kV/8kV



Med

ia C

onve

rter

s

37

Med

ia C

onve

rter

ET8181/ET161161 Series Industrial Rack-mount 8/16-port 10/100Base-TX to 8/16-port 100Base-FX SFP Ethernet Media Converter

FeaturesGeneral 19” 1U Rack-mount Converts 10/100BASE-TX to 100BASE SFP Supports Full/Half duplex, Auto Negotiation Supports Auto MDI/MDI-X Supports external 100BASE SFP AC Power input -10°C to 60°C (14°F to 140°F) operating temperature


8or

16E SFP 8

or16


Model Description

ET8181-S

ET161161-S

Industrial Rack-mount 8-port 10/100Base-TX to 8-port 100Base-FX SFP Ethernet Media Converter

Industrial Rack-mount 16-port 10/100Base-TX to 16-port 100Base-FX SFP Ethernet Media Converter



100~240VAC input.

NOTES: (1) Please feel free to consult factory for any special requirement and customization

SFP Options

Mounting Options

Power Options

www.ot-systems.com1

Med

ia C

onve

rter

s

38

Accessories

Med

ia C

onve

rter

EthernetStandards:

Processing Type:Forward Filter Rate:

Cabling:

Packet Buffer Memory:Max Packet Length:

IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX/FX Converter mode14,880pps (10Mbps)148,800pps (100Mbps)10BASE-T: Cat5 or above 100BASE-TX: Cat5 or above128K bits1600 Bytes

Electrical and MechanicalInput Power:Power Consumption:Dimensions (WxDxH):Weight:Casing:Mounting Options:

100~240VAC , 50/60Hz#1 #2 100mA / 200mA @220VAC

433 x 250 x 44 mm#1 #21.5 /2 Kg

Metal caseRack Mount

Specifications

ET8181/ET161161 Series

InterfaceConnector: 10/100TX: 100FX:LED Indicators: Power: 10/100TX(Per Port): 100FX(Per Port):

#1 #28 /16 x RJ45#1 #28 /16 x SFP

Power StatusLink/Activity, SpeedLink

Regulatory ApprovalsISO9001FCC Part 15, Class AEN55022 Class ASurge Protection: RJ45: 1kV Power: 0.5kV

#1 ET8181 Series#2 ET161161 Series


-10°C to 60°C (14°F to 140°F)-40°C to 85°C (-40°F to 185°F)0% to 95% (non-condensing)



Med

ia C

onve

rter

s

39

ET2111 Series Industrial Unmanaged 2-port 10/100Base-TX + 1-port 100Base-FX Ethernet Switch


(YY) = Installation

SA

CM

Standalone Wall-Mount

Card Module

1FFeatures

General Converts 10/100BASE-TX to 100BASE-FX Full/Half deplex, Auto-Negotiation Singlemode or Multimode fiber operation Single or Dual-core fiber with SC or ST connectors Store and forward switching mechanism MDI/MDI-X Auto-Crossover supported Plug-and-Play Wall-mount or operate in ET-C12 rack mount chassis -20ºC to 60ºC (-4ºF to 140ºF) operating temperature


2E


A

B

C

D

E

F

G

H

I

J

K

L













14dB

21dB

21dB

21dB

19dB

19dB

14dB

21dB

21dB

21dB

19dB

19dB

2km

20km

2km

2km

20km

20km

2km

20km

2km

2km

20km

20km

1310nm

1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

1310nm

1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

ET-PA/12V 1.25A 12VDC Power Adaptor. DC Jack. Power Adaptor is included for all sales. For CM Model, power from ET-C12 Chassis.



(3) Please feel free to consult factory for any special requirement and customization

Power Options

Model Description

ET2111-X-YY Industrial Unmanaged 2-port 10/100Base-TX + 1-port 100Base-FX Ethernet Switch


Net

wor

k S

wit

ches

40

EthernetStandards:

Processing Type:


Cabling:


IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX/FX IEEE802.3x Flow ControlStore and forwardHalf-duplex, Full-duplex14,880pps (10Mbps)148,800pps (100Mbps)10BASE-T: Cat5 or above 100BASE-TX: Cat5 or aboveCat5 UTP up to 100m2 x RJ452048 MAC Addresses

Electrical and MechanicalInput Power:Power Consumption:LED Indicators: Power: 10/100TX(Per Port): 100FX(Per Port):Dimensions (WxDxH): Standalone Card ModuleWeight: Standalone Card ModuleCasing:Mounting Options:

12VDC (DC Jack)2.4W Max. 0.21A@12VDC

Power StatusLink/Activity, SpeedLink/Activity

122 x 30 x 103 mm130 x 31 x 111 mm

0.33Kg (0.43Kg with PA)0.33KgAluminum caseWall-mount/ET-C12 Rack Mount

Specifications

ET2111 Series

OpticalCabling:

Maximum Distance:

Wavelength:

Connector:


EnvironmentalOperating Temperature:Storage Temperature:

MTBF:Humidity:

-20°C to 60°C (-4°F to 140°F)-40°C to 85°C (-40°F to 185°F)

> 100,000 hoursRelative 0% to 95% non-condensing

Regulatory ApprovalsISO9001FCC Class AEN55022:2006 Class AEN 55024:1998 + A1:2001 + A2:2003

Unit: mm



Net

wor

k S

wit

ches

41

(S) = SFP option. Please select your SFP on our SFP Option page. SFP module is to be purchased separately.


DR-120-48 120W/2.5A 48VDC DIN-Rail Power Supply. Open Wire for Terminal Block. DRP-240-48 240W/5A 48VDC DIN-Rail Power Supply. Open Wire for Terminal Block. GS120A48 120W/2.5A 48VDC Power Supply. Open Wire for Terminal Block. GS220A48 220W/4.6A 48VDC Power Supply. Open Wire for Terminal Block. Power Supply is to be purchased separately.

SFP Options

Mounting Options

Power Options

ET2281H Hardened Unmanaged 8-port 100Base-FX SFP + 2-port 10/100/1000Base-T/SFP Combo Optical Ethernet Switch


Model Description

ET2281H-SHardened Unmanaged 8-port 100Base-FX SFP + 2-port 10/100/1000Base-T/SFP Combo Optical Ethernet Switch

FeaturesGeneral 8 100BASE-FX SFP + 2 10/100/1000BASE-TX/SFP Combo Combo RJ45 Port Supports 10/100/1000Mbps- Full/Half-duplex, Auto-negotiation, Auto MDI/MDI-X Supports external SFP Supports 802.3x Flow control Supports 8K MAC address 1M bits frame buffer memory Supports Relay output for Power and Port failure Supports DIN-Rail and Wall-mount installation Redundant Power Inputs Environmentally Hardened -40°C to 75°C (-40°F to 167°F) operating temperature


www.ot-systems.com1

SFP 1G

Hardened

8 Combo

2

www.ot-systems.com

Net

wor

k S

wit

ches

42

EthernetStandards:


Packet Buffer Memory:Max. Packet Length:Address Table Size:Connector:Optical Port:

IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX/FXIEEE802.3ab 1000BASE-T Store-and-forward14,880pps (10Mbps)148,800pps (100Mbps)1,488,000pps (1000Mbps)1M bit1522 Bytes8K MAC Addresses2 x RJ4510 x SFP


Power Consumption:

LED Indicators: Power: Ethernet (Per Port): SFP (Per Port):Dimensions (WxDxH):Weight:Casing:Mounting Options:

12~48VDC, Redundant Power(6-pin Terminal Block)

Max. 7W (System no-load)Max. 13W (System Full-load)

Power StatusLink/Active, SpeedLink/Active59 x 120.5 x 165 mm0.9KgMetal CaseDIN-Rail, Wall-mount bracket included

Specifications

ET2281H



Regulatory ApprovalsISO9001EN55022:2006+A1: 2007 Class ASurge Protection: RJ45: 1kV Power: 500V ESD: 4kV/8kV



Net

wor

k S

wit

ches

43



100~240VAC input.

SFP Options

Mounting Options

Power Options

ET22161Unmanaged 16-port 100Base-FX SFP + 2-port 10/100/1000Base-T Optical Ethernet Switch


Model Description

ET22161-S Unmanaged 16-port 100Base-FX SFP + 2-port 10/100/1000Base-T Optical Ethernet Switch

FeaturesGeneral Supports 10/100/1000Mbps-Full/Half-duplex, Auto- negotiation, Auto MDI/MDI-X Supports external 100M SFP Supports 802.3x Flow Control 8K MAC address 1Mbits buffer memory 19” 1U Rack-mount AC power input 0°C to 50°C (32°F to 122°F) operating temperature


www.ot-systems.com1

E 2

SFP 1G16

www.ot-systems.com

Net

wor

k S

wit

ches

44

EthernetStandards:


Max. Packet Length:Address Table Size:Connector:Optical Port:

IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX/FXIEEE802.3ab 1000BASE-TIEEE802.3x Flow Control 1M bitsStore-and-forward14,880pps (10Mbps)148,800pps (100Mbps)1,488,000pps (1000Mbps)1522 Bytes8K MAC Addresses2 x RJ45 (10/100/1000BASE-TX)16 x 100M SFP Slots

Electrical and MechanicalInput Power:Power Consumption:LED Indicators: Power: Ethernet (Per Port): SFP (Per Port):Dimensions (WxDxH):Weight:Casing:Mounting Options:

100~240VAC, 50/60Hz210mA@220VAC

PWR (Power Status)Link/Activity, SpeedLink/Activity433 x 200 x 44 mm1.7KgMetal CaseRack Mount

Specifications

ET22161






www.ot-systems.com


Net

wor

k S

wit

ches

45


19” 1U Rackmount.

100~240VAC power input.

SFP Options

Mounting Options

Power Options

ET22241Unmanaged 24-port 100Base-FX SFP + 2-port 10/100/1000Base-T/SFP Combo Optical Ethernet Switch


Model Description

ET22241-S Unmanaged 24-port 100Base-FX SFP + 2-port 10/100/1000Base-T/SFP Combo Optical Ethernet Switch

FeaturesGeneral 24 100BASE-FX SFP + 2 10/100/1000BASE-TX/SFP Combo RJ45 Port Supports 10/100/1000Mbps-Full/Half- duplex, Auto-negotiation, Auto MDI/MDI-X Supports external SFP Supports 802.3x Flow control Supports 8K MAC address 1M bits frame buffer memory 19” 1U Rack-mount AC Power input 0°C to 50°C (32°F to 122°F) operating temperature


www.ot-systems.com1

SFP 1G24 Com

bo2

www.ot-systems.com

Net

wor

k S

wit

ches

46

EthernetStandards:



IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX/FXIEEE802.3ab 1000BASE-T Store-and-forward14,880pps (10Mbps)148,800pps (100Mbps)1,488,000pps (1000Mbps)1M bit1522 Bytes8K MAC Addresses2 x RJ4526 x SFP



100~240VDC, 50/60HzMax. 10W (System no-load)Max. 24W (System Full-load)

Power StatusLink/Active, SpeedLink/Active433 x 200 x 44 mm1.9KgMetal CaseRack Mount

Specifications

ET22241






Net

wor

k S

wit

ches

47


12VDC, 1.5A, Power Adaptor, DC Jack. Power Adaptor is included for all sales.

Power Options

Model Description

EC-8200 Econ-line Unmanaged 8-port 10/100/1000Base-T Ethernet Switch

1

EC8200Econ-line Unmanaged 8-port 10/100/1000Base-T Ethernet Switch

FeaturesGeneral Supports Auto-Negotiation and Auto MDI/MDI-X Supports 802.3x Flow Control Fan-less design(no noise) for office environment Support Energy Efficient Ethernet IEEE 802.3az Plug and Play installation


www.ot-systems.com

E 8 1G

www.ot-systems.com

Net

wor

k S

wit

ches

coneline

48

EthernetStandards:


Packet Buffer Memory:Connector:Address Table Size:

IEEE802.3 10BASE-T IEEE802.3u 100BASE-TXIEEE802.3ab 1000BASE-T

IEEE802.3x Flow ControlStore and forward14,880pps (10Mbps)148,800pps (100Mbps)1,488,000pps (1000Mbps)1Mbit8 x RJ454K MAC Addresses

Electrical and MechanicalInput Power:Power Consumption:LED Indicators: Power: Ethernet(Per Port):Dimensions (WxDxH):Weight:Casing:Mounting:

12VDC, DC Socket1A, 12W(Max.)

Power StatusLink, Activity158 x 111 x 26 mm0.5KgMetal CaseDesktop

Specifications

EC8200

IEEE802.3az Energy Efficient Ethernet




2www.ot-systems.com


www.ot-systems.com


Net

wor

k S

wit

ches

49

ET8242M Series Industrial Managed 8-port 10/100/1000Base-T/SFP Combo + 4-port 1000Base-FX SFP Ethernet Switch


Model Description

ET8242M-S-DR Industrial Managed 8-port 10/100/1000Base-T/SFP Combo + 4-port 1000Base-FX SFP Ethernet Switch




SFP Options

Mounting Options

Power Options

4

SFP

FeaturesGeneral Supports Jumbo Frame up to 9K Bytes Ring Redundancy (recovery time < 20ms over 250 units, MSTP/RSTP/STP (IEEE 802.1s/w/D) for Ethernet Redundancy Supports ACLs, 802.1x User Authentication for Security Supports SNMP v1/v2c/v3, RMON & 802.1Q VLAN Network Management Supports DDM(Digital Diagnostic Monitoring) Function(P1~P8) Supports DOS/DDOS Auto Prevention IGMP v2/v3 (IGMP snooping support) for Filtering Multicast Traffic -10°C to 60°C ( 14°F to 140°F) operating temperature


1G


1GCombo

8

l

www.ot-systems.com

l l l l l l

Net

wor

k S

wit

ches

50

l l l l l l l l

Specifications

ET8242M Series

Electrical and MechanicalInput Power:Power Consumption:Protection: Overload Current: Reverse Polarity:LED Indicators: Power: Systems:

Ethernet(Per Port): SFP(Per Port):Dimensions (WxDxH):Weight:Mounting Options:

Dual 12~48VDC Redundant Input22 Watts

PresentPresent on Terminal Block

Power Status (PWR, PWR1, PWR2,Fault)Ring (Ring)Ring Master (R.M)Link/ActivityLink/Activity96.4 x 108.5 x 154mm1.42KgIP30 Metal CaseDIN-Rail/Wall Mountable

Regulatory ApprovalsEMIEMS

Stability Testing

FCC Part 15, CISPR (EN55022) Class AEN61000-4-2, EN61000-4-3,EN61000-4-4, EN41000-4-5,EN61000-4-6, EN61000-4-8EN61000-4-11Shock: IEC60068-2-27Free Fall: IEC60068-2-32Vibration: IEC60068-2-6

EthernetStandard:

Processing Type:Address Table Size:Priority Queues:Jumbo Frame:Interface: 10/100/1000Base-X: Gigabit Fiber: RS-232 Console

IEEE802.3 for 10BASE-TIEEE802.3u 100BASE-TX/FXIEEE802.3z 1000BASE-XIEEE802.3ab 1000BASE-TIEEE802.3x Flow ControlIEEE802.3ad for LACPIEEE802.1D Spanning TreeIEEE802.1p Class of ServiceIEEE802.1Q VLAN TagIEEE802.1w Rapid Spanning TreeIEEE802.1s Multiple Spanning TreeIEEE802.1x User AuthenticationIEEE802.1ab Link Layer DiscoveryStore-and-Forward8K MAC Addresses4Up to 9K bytes

8 x RJ454 x 1000BASE-X SFP Ports1 x RJ45 (Console Cable Included)

Software FeaturesSoftware Features: STP/RSTP/MSTP (IEEE802.1D/w/s) Redundant Ring with Recovery Time < 20ms over 250 Units TOS/Diffserv Supported Quality of Service(802.1p) for Real-Time Traffic VLAN (802.1Q) with VLAN Tagging and GVRP Supported IGMP Snooping for Multicast Filtering IP-Based Bandwidth Management Application -Based QoS Management DOS/DDOS Auto Prevention Port Configuration, Status, Statistics, Monitoring, Security DHCP Client/ServerSecurity Features: IP Police Security Feature Enable/Disable Ports, MAC Based Port Security Port Based Network Access Control(802.1x) VLAN(802.1q) to Segregate and Secure Network Traffic RADIUS Centralized Password Management SNMP v3 Encrypted Authentication and Access Security




Due to continuous improvement, all product specifications are subject to change without further notice.

www.ot-systems.com


www.ot-systems.com


Net

wor

k S

wit

ches

51


19” 1U Rack-mount.

100~240VAC Input.

SFP Options

Mounting Options

Power Options

ET16122MManaged 16-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Ethernet Switch


Model Description

ET16122M Managed 16-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Ethernet Switch

1

FeaturesGeneral 16 100BASE-TX + 2 10/100/1000BASE-TX/SFP Combo RJ45 Port Supports 10/100Mbps-Full/Half-duplex, Auto-negotiation, Auto MDI/MDI-X Combo RJ45 Port Supports 10/100/1000Mbps- Full/Half-duplex, Auto-negotiation, Auto MDI/MDI-X Supports external SFP Supports 802.3x Flow control Supports IGMP snooping V1/V2 Supports 4K MAC address 2.75M bits frame buffer memory 19” 1U Rack-mount AC Power Inputs 0°C to 50°C (32°F to 122°F) operating temperature


www.ot-systems.com

E 16

www.ot-systems.com

1GCombo

2

www.ot-systems.com

Net

wor

k S

wit

ches

52

EthernetStandards:



IEEE802.3 10BASE-T IEEE802.3u 100BASE-TXIEEE802.3ab 1000BASE-TIEEE802.3z 1000BASE-X Store-and-forward14,880pps (10Mbps)148,800pps (100Mbps)1,488,000pps (1000Mbps)2.75M bit1536 Bytes4K MAC Addresses18 x RJ452 x SFP 1000BASE-X

Software FeaturesManagement:Port Configuration:

VLAN Setting:

QoS Setting:

Security:Spanning Tree:

Trunking:

DHCP:

Miscellaneous:

Web, CLI, SNMPPort speed duplex mode selection,Bandwidth Control, Broadcast StormControl32 tag based entries VLAN Groups,18 Port based VLAN Groups, MTU VLANAllows to assign low/high priority oneach port, First-In-First-Out, All-High-before-Low, Weight-Round-RobinQoS Policy.MAC Address, TCP & UDP FilterSTP, IEEE802.1D (Spanning Tree Protocol)RSTP, IEEE802.1w (Rapid Spanning TreeProtocol)2 group of 4-Port 10/100BASE-TX trunksupport, up to 800Mbps bandwidth pertrunk, 1 group of 2-Port 10/100/1000Mbps trunk support,up to 2000Mbps bandwidth per trunkDHCP Relay Agent, DHCP Server, VLANMap Relay AgentOutput Queue Aging Time, VLANStriding, IGMP Snooping V1/V2

Specifications

ET16122M




2



100~240VAC 50/60HzMax. 7W (System no-load)Max. 12W (System Full-load)


www.ot-systems.com


www.ot-systems.com


www.ot-systems.com


Net

wor

k S

wit

ches

53



100~240VAC Input.

SFP Options

Mounting Options

Power Options

ET24122MManaged 24-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Ethernet Switch


Model Description

ET24122M Managed 24-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Ethernet Switch

1

FeaturesGeneral 24 100BASE-TX + 2 10/100/1000BASE-TX/SFP Combo RJ45 Port Supports 10/100Mbps-Full/Half-duplex, Auto-negotiation, Auto MDI/MDI-X Combo RJ45 Port Supports 10/100/1000Mbps- Full/Half-duplex, Auto-negotiation, Auto MDI/MDI-X Supports external SFP Supports 802.3x Flow control Supports IGMP snooping V1/V2 Supports 4K MAC address 2.75M bits frame buffer memory 19” 1U Rack-mount AC Power Inputs 0°C to 50°C (32°F to 122°F) operating temperature


www.ot-systems.com

E 24 1G

www.ot-systems.com

Combo

2

www.ot-systems.com

Net

wor

k S

wit

ches

54

EthernetStandards:



IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX/FXIEEE802.3ab 1000BASE-TIEEE802.3z 1000BASE-X Store-and-forward14,880pps (10Mbps)148,800pps (100Mbps)1,488,000pps (1000Mbps)2.75M bit1536 Bytes4K MAC Addresses26 x RJ452 x SFP 1000BASE-X

Sothware FeaturesManagement:Port Configuration:

VLAN Setting:

QoS Setting:


Trunking:

DHCP:

Miscellaneous:

Web, CLI, SNMPPort speed duplex mode selection,Bandwidth Control, Broadcast StormControl32 tag based entries VLAN Groups,26 Port based VLAN Groups, MTU VLANAllows to assign low/high priority oneach port, First-In-First-Out, All-High-before-Low, Weight-Round-RobinQoS Policy.MAC Address, TCP & UDP FilterSTP, IEEE802.1D (Spanning Tree Protocol)RSTP, IEEE802.1w (Rapid Spanning TreeProtocol)2 group of 4-Port 10/100BASE-TX trunksupport, up to 800Mbps bandwidth pertrunk, 1 group of 2-Port 10/100/1000Mbps trunk support,up to 2000Mbps bandwidth per trunkDHCP Relay Agent, DHCP Server, VLANMap Relay AgentOutput Queue Aging Time, VLANStriding, IGMP Snooping V1/V2

Specifications

ET24122M




2



100~240VAC 50/60HzMax. 7W (System no-load)Max. 15W (System Full-load)


www.ot-systems.com


www.ot-systems.com


www.ot-systems.com


Net

wor

k S

wit

ches

55


Default DIN-Rail Bracket installed. Wall Mount Bracket is included.

DR-120-48 120W/2.5A DIN-Rail 48VDC Power Supply. Open Wire for Terminal Block. DRP-240-48 240W/5A DIN-Rail 48VDC Power Supply. Open Wire for Terminal Block. GS120A48 120W/2.5A 48VDC Power Supply. Open wire for Terminal Block. GS220A48 220W/4.6A 48VDC Power Supply. Open wire for Terminal Block. Power Supply is to be purchased separately.

SFP Options

Mounting Options

Power Options

ET4111Pp Series Industrial Unmanaged 4-port 10/100Base-TX + 1-port 100Base-FX SFP Ethernet Switch with PoE+


Model Description

ET4111Pp-S-DR Industrial Unmanaged 4-port 10/100Base-TX + 1-port 100Base-FX SFP Ethernet Switch with PoE+

FeaturesGeneral Supports IEEE802.3at PoE+(30W per port) Supports external 100BASE SFP Supports Auto-Negotiation and Auto MDI/MDI-X Supports Store-and-Forward Transmission Support DIN -Rail & Wall-mount installation -10°C to 60°C (14°F to 140°F) operating temperature



E 4

SFP 1PoE

+

PoE

Sw

itch

esP

oE S

wit

ches

56

EthernetStandards:

Packet Buffer Memory:Processing Type:


Cabling:


IEEE802.3 10Base-T IEEE802.3u 100Base-TX/FXIEEE802.3x Flow Control IEEE802.3af Power over EthernetIEEE802.3at Power over Ethernet512K bitsStore-and-forwardHalf-duplex back-pressure andIEEE802.3x Full-duplex flow control14,880pps (10Mbps)148,800pps (100Mbps)10BASE-T: Cat5 or above 100BASE-TX: Cat5 or aboveCat5 UTP up to 100m4 x RJ451024 MAC Addresses


PoE: Standard: Port: Mode:

Max. Power per port:Protection: Overload: Reverse Polarity:LED Indicators: Power: 10/100TX(Per Port): SFP:Dimensions (WxDxH):Weight:Casing:Mounting Options:

48V~57VDC (Terminal Block)130W Max. 2.7A@48VDC (PoE in use)5W Max. 0.1A@48VDC (PoE not in use)

IEEE802.3atRJ-45 Port 1 ~ Port 4Alternative B ModePositive (VCC+): RJ45 Pin4, 5Negative (VCC-): RJ45 Pin7, 830W per Port for PSE PresentPresent

PWR (Power Status)Link/Activity, PoELink/Activity136 x 104.6 x 29.5 mm0.5KgMetalDIN-Rail/Wall-mount

Specifications

ET4111Pp Series



Regulatory ApprovalsISO9001FCC Part 15, Class AEN55022 Class AEN61000-4-5 (Surge Standards) RJ45: 1kV Power: 500V



PoE

Sw

itch

esP

oE S

wit

ches

57

SFP Options

Mounting Options

Power Options

ET8122PpHHardened Unmanaged 8-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Ethernet Switch with PoE+


Model Description

ET8122PpH Hardened Unmanaged 8-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Ethernet Switch with PoE+

1

FeaturesGeneral 8 10/100Base-TX + 2 10/100/1000Base-TX/SFP Combo with PoE+/PSE Supports IEEE802.3at PoE(30W per port) RJ45 Port Supports 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto MDI/MDI-X Combo RJ45 Port Supports 10/100/1000Mbps- Full/Half-duplex, Auto-Negotiation, Auto MDI/MDI-X Supports external SFP Supports 802.3x Flow control Support 8K MAC addresses 1M bits frame buffer memory Supports Relay output for Power and Port failure Supports DIN-Rail and Wall-mount installation Redundant Power Inputs Environmentally hardened -40°C to 75°C (-40°F to 167°F) operating temperature


(S) = SFP option. Please select your SFP option on our SFP Option page. SFP module is to be purchased separately.



www.ot-systems.com

E 8 PoE+ 1G

Hardened

Combo

2

www.ot-systems.com

PoE

Sw

itch

esP

oE S

wit

ches

58

EthernetStandards:


Packet Buffer Memory:Max Packet Length:Address Table Size:Connector:Optical Port:

IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX/FXIEEE802.3ab 1000BASE-TIEEE802.3af/at Power over Ethernet Store-and-forward14,880pps (10Mbps)148,800pps (100Mbps)1,488,000pps (1000Mbps)1M bit1522 Bytes8K MAC Addresses10 x RJ452 x SFP


Power Consumption:

LED Indicators: Power: Ethernet(Per Port): SFP:Dimensions (WxDxH):Weight:Casing:Mounting:

48~57VDC, Redundant Power

Max. 7W (System no-load)Max. 13W (System Full-load) Power StatusLink/Active, SpeedLink, Active59 x 120.5 x 165 mm0.9KgMetal caseDIN-Rail / Wall Mount

Specifications

ET8122PpH

(6-pin Terminal Block)


-40°C to 75°C (-40°F to 167°F)-40°C to 85°C (-40°F to 185°F)5% - 95% (non-condensing)


2www.ot-systems.com


www.ot-systems.com


PoE

Sw

itch

esP

oE S

wit

ches

59

SFP Options

Mounting Options

Power Options

ET16122PpUnmanaged 16-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Ethernet Switch with PoE+


Model Description


1

(S) = SFP option. Please select your SFP option on our SFP Option page.


100~240VAC Input.

FeaturesGeneral 16 10/100BASE-TX + 2 10/100/1000BASE-TX/SFP Combo with PoE+ Supports IEEE802.3at PoE(30W per port) RJ45 Port Supports 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto MDI/MDI-X Combo RJ45 Port Supports 10/100/1000Mbps- Full/Half-duplex, Auto-Negotiation, Auto MDI/MDI-X Supports external SFP Supports 802.3x Flow control Support 4K MAC addresses 2.75 M bits frame buffer memory 19” 1U Rack-mount AC Power Input 0°C to 50°C (32°F to 122°F) operating temperature


www.ot-systems.com

E 16 PoE+ 1GCom

bo2

www.ot-systems.com

PoE

Sw

itch

esP

oE S

wit

ches

60

EthernetStandards:



IEEE802.3 10BASE-T IEEE802.3u 100BASE-TXIEEE802.3ab 1000Base-TIEEE802.3z 1000Base-X

Store-and-forward14,880pps (10Mbps)148,800pps (100Mbps)1,488,000pps (1000Mbps)2.75M bit1536 Bytes4K MAC Addresses18 x RJ452 x SFP 1000BASE-X


PoE: Standard: Port: Per Port Power: Max. PoE Power:LED Indicators: Power: Ethernet(Per Port): SFP:Dimensions (WxDxH):Weight:Casing:Mounting:

100~240VAC 50/60HzMax. 7W (System no-load)Max. 12W (System Full-load) IEEE802.3atRJ45 Port1~Port1630W (Alternative B Mode)390W (16Port share)

Power StatusLink/Active, SpeedLink, Active433 x 350 x 44 mm3.3KgMetal caseRack Mount

Specifications

ET16122Pp

IEEE802.3at


0°C to 50°C (32°F to 122°F)-20°C to 75°C (-4°F to 167°F)5% - 95% (non-condensing)


2www.ot-systems.com


www.ot-systems.com


PoE

Sw

itch

esP

oE S

wit

ches

61



100~240VAC input.

SFP Options

Mounting Options

Power Options

ET24122Pp Series Unmanaged 24-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Ethernet Switch with PoE+


Model Description

ET24122Pp-S Unmanaged 24-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Ethernet Switchwith PoE+

FeaturesGeneral

R

24 10/100Base-TX + 2 10/100/1000Base-TX/SFP Combo with PoE+

J45 10/100Mbps-Full/Half-duplex, Auto negotiation, Auto MDI/MDIX Combo RJ45 10/100/1000Mbps-Full/Half-duplex, Auto-negotiation, Auto MDI/MDIX Supports external SFP Supports 802.3x Flow control Supports 4K MAC address 2.75M bits frame buffer memory 19” 1U Rack-mount AC power input 0°C to 50°C (32°F to 122°F) operating temperature


PoE+

24E

1

Combo

2

www.ot-systems.com

PoE

Sw

itch

esP

oE S

wit

ches

62

EthernetStandards:



IEEE802.3 10Base-T IEEE802.3u 100Base-TXIEEE802.3ab 1000Base-TIEEE802.3z 1000Base-XIEEE802.3at

2.75MbitsStore-and-forward14,880pps (10Mbps)148,800pps (100Mbps)1,488,000pps (1000Mbps)1536 Bytes4K MAC Addresses26 x RJ45 2 x SFP 1000Base-X


PoE: Standard: Port: Mode: Per Port Power: Max PoE Power:LED Indicators: Power: Ethernet(Per Port): SFP(Per Port):Dimensions (WxDxH):Weight:Casing:Mounting Options:

100~240VAC, 50/60HzMax 7W / System no-loadMax 15W / System Full-load

IEEE802.3atRJ45 Port 1 ~ Port 24Alternative B Mode30W 390W ( 24 Port share) Power StatusLink/Activity, SpeedLink/Activity433 x 350 x 44 mm3.4KgMetal CaseRack Mount

Specifications

ET24122Pp Series



Regulatory ApprovalsISO9001EN55022:2006+A1:2007 Class ASurge Protection: RJ45: 1kV Power: 500V ESD: 2kV/4kV

2www.ot-systems.com


PoE

Sw

itch

esP

oE S

wit

ches

63

48VDC, 2A External Power Adapter, DC Jack.

Power Adapter is included in all sales.

Power Options

EC9100PEcon-line Unmanaged 8-port 10/100Base-TX (PoE) + 1-port 1000Base-T Ethernet Switch


Model Description

EC9100P Econ-line Unmanaged 8-port 10/100Base-TX (PoE) + 1-port 1000Base-T Ethernet Switch

www.neotechcomm.com.tw1

FeaturesGeneral Supports IEEE802.3af PoE (15.4W per port) Supports Auto-Negotiation and Auto MDI/MDI-X Supports Store-and-Forward Transmission Supports overload protection and non-PoE device detection


www.ot-systems.com

E 9 1GPoE

www.ot-systems.com

PoE

Sw

itch

es

coneline

64

EthernetStandards:

Processing Type:

Switch Fabric:Cabling:


IEEE802.3 10BASE-T IEEE802.3u 100BASE-TXIEEE802.3ab 1000BASE-TIEEE802.3x Flow ControlIEEE802.3af Power over Ethernet Store-and-forward

3.6Gbps10BASE-T: Cat5 or above100BASE-TX: Cat5 or aboveCat5 UTP up to 100m9 x RJ45 (P1~P8: PoE)



Max. Power per port:LED Indicators: Power: 10/100TX(Per Port): 10/100/1000TX:Dimensions (WxDxH):

Mounting:

48VDC, 2A, DC Socket

IEEE802.3afRJ45 Port 1 ~ Port 8Alternative A ModePositive (VCC+): RJ45 Pin1,2Negative (VCC-): RJ45 Pin3,615.4W per Port PWR (Power Status)Link, Activity, PoE Power Injected(P1-P8)Link, Activity225 x 121 x 35 mm

Desktop

Specifications

EC9100P

Forward Filter Rate: 14,880ppps (10Mbps)148,800pps (100Mbps)1,488,000pps (1000Mbps)

Power Consumption: 2A (max.)

Weight: 0.8Kg


0°C to 40°C (32°F to 104°F)-10°C to 70°C (14°F to 158°F)10% - 90% (non-condensing)

Regulatory Approvals

CEFCCISO9001

2www.ot-systems.com


www.ot-systems.com


PoE

Sw

itch

es

65

48VDC, 1.25A External Power Adapter, DC Jack.

Power Adapter is included in all sales.

Power Options

EC5100PEcon-line Unmanaged 4-port 10/100Base-TX (PoE) + 1-port 100Base-TX Ethernet Switch


Model Description

EC5100P Econ-line Unmanaged 4-port 10/100Base-TX (PoE) + 1-port 100Base-TX Ethernet Switch

1

FeaturesGeneral Supports IEEE802.3af PoE (15.4W per port) Supports Auto-Negotiation and Auto MDI/MDI-X Supports Store-and-Forward Transmission Supports Power Saving Technology - power down unused ports and when a connected device in standby mode


www.ot-systems.com

E 5 PoE

www.ot-systems.com

PoE

Sw

itch

es

coneline

66

EthernetStandards:


Switch Fabric:Cabling:


IEEE802.3 10BASE-T IEEE802.3u 100BASE-TXIEEE802.3x Flow ControlIEEE802.3af Power over Ethernet Store-and-forward14,880pps (10Mbps)148,800pps (100Mbps)1Gbps10BASE-T: Cat5 or above100BASE-TX: Cat5 or aboveCat5 UTP up to 100m5 x RJ45 (P1~P4: PoE)



Max. Power per port:LED Indicators: Power: 10/100TX(Per Port):Dimensions (WxDxH):Weight:Casing:Mounting:

48VDC, 1.25A (max.), DC Socket8W Max. (Standby)48W Max. (PoE in use)

IEEE802.3afRJ45 Port 1 ~ Port 4Alternative A ModePositive (VCC+): RJ45 Pin1,2Negative (VCC-): RJ45 Pin3,615.4W per Port PWR (Power Status)Link, Activity, PoE Power Injected(P1-P4)140 x 91 x 28 mm0.3KgMetal CaseDesktop

Specifications

EC5100P


0°C to 45°C (32°F to 113°F)-20°C to 80°C (-4°F to 176°F)Max. 90% (non-condensing)

Regulatory Approvals

CEFCCISO9001

2www.ot-systems.com


www.ot-systems.com


PoE

Sw

itch

es

67

ET4222PpH Series Hardened IP CCTV Self-Configured 4-port 10/100/1000Base-T + 2-port 1000Base-FX SFP Ethernet Switch with PoE+


E

Model Description

ET4222PpH-S-DR Hardened IP CCTV Self-Configured 4-port 10/100/1000Base-T + 2-port 1000Base-FX SFP Ethernet Switch with PoE+




SFP Options

Mounting Options

Power Options

2

SFP

FeaturesGeneral Automatically support IGMP (Multicasting) Supports 10/100/1000Mbps-Full/Half-duplex, Auto-negotiation, Auto MDI/MDI-X Supports external 1000BASE SFP Supports Daisy-Chain connection Supports IEEE 802.3at PoE+(30W per port) Supports Light Hardware IGMP V1, V2, V3 Supports Broadcast Storm Control Supports Relay output for power failure 1M bits frame buffer memory Supports 9K Bytes Jumbo Frame Supports Energy Efficient Ethernet IEEE802.3az Redundant Power Inputs Supports Wal l-mount and DIN-Rail installation Environmentally hardened -40°C to 75°C ( -40°F to 167°F) operating temperature


PoE+ 1G4E

Hardened

1 www.ot-systems.com

PoE

Sw

itch

es

68

EthernetStandards:

Forward & Filtering Rate:

Packet Buffer Memory:Processing Type:Max Packet Length:Address Table Size:Connector:Optical Port:

IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX/FXIEEE802.3ab 1000BASE-T IEEE802.3z 1000BASE-XIEEE802.3af Power over EthernetIEEE802.3at Power over Ethernet14,880pps (10Mbps)148,800pps (100Mbps)1,488,000pps (1000Mbps)1M bitsStore-and-Forward 9K Bytes Jumbo Frame2048 MAC Addresses4 x RJ452 x SFP 1000BASE-X


PoE: Standard: Port: Max. Power per Port:Protection: Power Input Overload: Reverse Polarity:LED Indicators: Power: Ethernet(Per Port): SFP:Dimensions (WxDxH):Weight:Casing:Mounting Options:

2 x 48~57 VDC (Terminal Block)135W Max. 2.8A@48VDC (PoE in use)5W Max. 0.1A@48VDC (PoE not in use)

IEEE802.3atRJ45 Port 1 ~ Port 430W Max per port (Alternative B mode)

Automatic ResettablePresent

Power StatusLink/ActivityLink/Activity148 x 120 x 31mm0.5KgMetal CaseDIN-Rail / Wall Mount

Specifications

ET4222PpH Series



Regulatory ApprovalsISO9001EN55022 Class A, FCC part 15 Class ASurge Protection: RJ-45: 1kV Power: 500V

2www.ot-systems.com


PoE

Sw

itch

es

69

ET8122MPpIndustrial Managed 8-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Ethernet Switch with PoE+

(S) = SFP option. Please select your SFP on our SFP Option page.



SFP Options

Mounting Options

Power Options


Model Description

ET8122MPp Industrial Managed 8-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Ethernet Switch with PoE+

1

FeaturesGeneral

S

8 10/100Base-TX + 2 10/100/1000Base-TX/SFP Combo with PoE+/PSEupport IEEE802.3 at PoE(30W per port)

RJ45 Port Supports 10/100Mbps-Full/Half-deplex, Auto-negotiation, Auto MDI/MDIX Combo RJ45 Port Supports 10/100/1000Mbps Full/Half-duplex, Auto-negotiation, Auto MDI/MDIX

Supports 802.3x Flow control Supports external SFP

Supports IGMP snooping V1/V2 Supports 4K MAC address 1M bits frame buffer memory Supports Wall-mount and DIN-Rail installation Redundant Power Inputs -10°C to 60°C (14°F to 140°F) operating temperature


www.ot-systems.com

E 8 PoE+ 1GCom

bo2

www.ot-systems.com

PoE

Sw

itch

es

70

EthernetStandards:



IEEE802.3 10BASE-T IEEE802.3u 100BASE-TXIEEE802.3ab 1000BASE-TIEEE802.3z 1000BASE-XIEEE802.3at

Store-and-Forward14,880pps (10Mbps)148,800pps (100Mbps)1,488,000pps (1000Mbps)2.75 Mbits1536 Bytes4K MAC Addresses10 x RJ452 x SFP 1000BASE-X

Specifications

ET8122MPp



2


Power Consumption:

PoE: Standard: Port: Per Port Power:LED Indicators: Power: Ethernet(Per Port): SFP(Per Port):

Dimensions (WxDxH):Weight:Casing:Mounting Options:

48~57VDC, Redundant Power Input (6-pin Terminal Block)48~57 VDC (2 x Terminal Block)8W Max. 0.17A@48VDC (PoE not in use)

IEEE802.3atRJ45 Port 1 ~ Port 830W (Alternative B Mode)

Power StatusLink/Activity, SpeedLink/Activity

ALM: Power or Port Fail59x120.5x165mm1.0KgMetal CaseDIN-Rail/ Wall Mount

Software FeaturesManagement:PoE Management:

Port Configuration:

VLAN Setting:

QoS Setting:

Security:Spanning

Trunking:

Tree:

DHCP:

Miscellaneous:

Web, CLI, SNMPPoE Status, PoE Status,PoE SchedulingPort speed deplex mode selection,Bandwidth, Broadcast Storm Control32 tag based entries VLAN Groups,10 Port based VLAN Groups, MTU VLANAllows to assign low/high priority oneach port, First-In-First-Out,All-High-before-Low, Weight-Round-RobinQoS policyMAC Address, TCP & UDP FilterSTP, IEEE802.1D (Spanning Tree Protocol)RSTP, IEEE802.1w (Rapid SpanningTree Protocol)2 groups of 4-Port 10/100BASE-TX trunksupport, up to 800Mbps bandwidthper trunk1 group of 2-port 10/100/1000Mbpstrunk support, up to 2000Mbpsbandwidth per trunkDHCP Relay Agent, DHCP Server,VLAN Map Relay AgentOutput Queue Aging Time, VLANStriding, IGMP Snooping V1 & V2


www.ot-systems.com


www.ot-systems.com


PoE

Sw

itch

es

71

SFP Options

Mounting Options

Power Options

ET16122MPpManaged16-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Ethernet Switch with PoE+


Model Description

ET16122MPp Managed16-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Ethernet Switch with PoE+

1



100~240VAC Input.

FeaturesGeneral 16 10/100BASE-TX + 2 10/100/1000BASE-TX/SFP Combo with PoE+/PSE Supports IEEE802.3at PoE(30W per port) RJ45 Port Supports 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto MDI/MDI-X Combo RJ45 Port Supports 10/100/1000Mbps- Full/Half-duplex, Auto-Negotiation, Auto MDI/MDI-X Supports external SFP Supports 802.3x Flow control Supports IGMP snooping V1/V2 Support 4K MAC addresses 1M bits frame buffer memory 19” 1U Rack-mount AC Power Input 0°C to 50°C (32°F to 122°F) operating temperature


www.ot-systems.com

E 16 PoE+ 1GCom

bo2

www.ot-systems.com

PoE

Sw

itch

esP

oE S

wit

ches

72

EthernetStandards:



IEEE802.3 10BASE-T IEEE802.3u 100BASE-TXIEEE802.3ab 1000Base-TIEEE802.3z 1000Base-X

Store-and-forward14,880pps (10Mbps)148,800pps (100Mbps)1,488,000pps (1000Mbps)2.75M bit1536 Bytes4K MAC Addresses18 x RJ452 x SFP 1000BASE-X

Specifications

ET16122MPp

IEEE802.3at


0°C to 50°C (32°F to 122°F)-20°C to 75°C (-4°F to 167°F)5% - 95% (non-condensing)


www 2


PoE: Standard: Port: Per Port Power: Max. PoE Power:LED Indicators: Power: Ethernet(Per Port): SFP:Dimensions (WxDxH):Weight:Casing:Mounting:

100~240VAC 50/60HzMax. 7W (System no-load)Max. 12W (System Full-load) IEEE802.3atRJ45 Port1~Port1630W (Alternative B Mode)390W (16Port share)

Power StatusLink/Active, SpeedLink, Active433 x 345 x 44 mm3.3KgMetal caseRack Mount

Software FeaturesManagement:PoE Management:Port Configuration:

VLAN Setting:

QoS Setting:


Trunking:

DHCP:

Miscellaneous:

Web, CLI, SNMPPoE Status, PoE Setting, PoE SchedulingPort speed duplex mode selection,Bandwidth Control, Broadcast StormControl32 tag based entries VLAN Groups,18 Port based VLAN Groups, MTU VLANAllows to assign low/high priority oneach port, First-In-First-Out, All-High-before-Low, Weight-Round-RobinQoS Policy.MAC Address, TCP & UDP FilterSTP, IEEE802.1D (Spanning Tree Protocol)RSTP, IEEE802.1w (Rapid Spanning TreeProtocol)2 group of 4-Port 10/100BASE-TX trunksupport, up to 800Mbps bandwidth pertrunk, 1 group of 2-Port 10/100/1000Mbps trunk support,up to 2000Mbps bandwidth per trunkDHCP Relay Agent, DHCP Server, VLANMap Relay AgentOutput Queue Aging Time, VLANStriding, IGMP Snooping V1/V2

www.ot-systems.com


www.ot-systems.com


PoE

Sw

itch

esP

oE S

wit

ches

73

www.ot-systems.com

E 24



100~240VAC input.

SFP Options

Mounting Options

Power Options

ET24122MPpManaged 24-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Ethernet Switch with PoE+


Model Description

ET24122MPp Managed 24-port 10/100Base-TX + 2-port 10/100/1000Base-T/SFP Combo Ethernet Switch with PoE+

1

FeaturesGeneral 24 10/100BASE-TX + 2 10/100/1000BASE-TX/SFP Combo with PoE+/PSE Supports IEEE802.3at PoE(30W per port) RJ45 Port Supports 10/100Mbps-Full/Half-duplex, Auto-negotiation, Auto MDI/MDIX Combo RJ45 Port Supports 10/100/1000Mbps- Full/Half-duplex, Auto-negotiation, Auto MDI/MDIX Supports external 1000M SFP Supports 802.3x Flow control

Supports 4K MAC address Supports IGMP snooping V1/V2

2.75M bits frame buffer memory 19” 1U Rack-mount AC power input 0°C to 50°C (32°F to 122°F) operating temperature


PoE+ 1GCom

bo2

www.ot-systems.com

PoE

Sw

itch

es

74

www.ot-systems.com


EthernetStandards:



IEEE802.3 10Base-T IEEE802.3u 100Base-TXIEEE802.3ab 1000Base-TIEEE802.3z 1000Base-XIEEE802.3at

2.75MbitsStore-and-forward14,880pps (10Mbps)148,800pps (100Mbps)1,488,000pps (1000Mbps)1536 Bytes4K MAC Addresses26 x RJ45 2 x SFP 1000BASE-X

Specifications

ET24122MPp



Regulatory ApprovalsISO9001EN55022:2006+A1:2007 Class ASurge Protection: RJ45: 1kV Power: 500V ESD: 2kV/4kV

2


PoE: Standard: Port: Mode: Max. PoE Power: Per Port Power:LED Indicators: Power: Ethernet(Per Port): SFP(Per Port):Dimensions (WxDxH):Weight:Casing:Mounting Options:

100~240VAC, 50/60HzMax. 7W (System no-load)Max. 15W (System Full-load)

IEEE802.3atRJ45 Port 1 ~ Port 24Alternative B Mode390W ( 24 Port share)30W Power StatusLink/Activity, SpeedLink/Activity433 x 345 x 44 mm3.4KgMetal CaseRack Mount

Software FeaturesManagement:PoE Management:Port Configuration:

VLAN Setting:

QoS Setting:


Trunking:

DHCP:

Miscellaneous:

Web, CLI, SNMPPoE Status, PoE Setting, PoE SchedulingPort speed duplex mode selection,Bandwidth Control, Broadcast StormControl32 tag based entries VLAN Groups,26 Port based VLAN Groups, MTU VLANAllows to assign low/high priority oneach port, First-In-First-Out, All-High-before-Low, Weight-Round-RobinQoS Policy.MAC Address, TCP & UDP FilterSTP, IEEE802.1D (Spanning Tree Protocol)RSTP, IEEE802.1w (Rapid Spanning TreeProtocol)2 group of 4-Port 10/100BASE-TX trunksupport, up to 800Mbps bandwidth pertrunk, 1 group of 2-Port 10/100/1000Mbps trunk support,up to 2000Mbps bandwidth per trunkDHCP Relay Agent, DHCP Server, VLANMap Relay AgentOutput Queue Aging Time, VLANStriding, IGMP Snooping V1/V2

www.ot-systems.com


PoE

Sw

itch

es

75

ET-INJ30 Series Hardened Gigabit 1-port Ethernet Input + 1-port PoE+ Output Injector


Model Description

ET-INJ30 Hardened Gigabit 1-port Ethernet Input + 1-port PoE+ Output Injector



Mounting Options

Power Options

Typical Application

FeaturesGeneral 1 RJ45 Ethernet Data Input Port + 1 RJ45 Power Over Ethernet Output Port(Data + Power) Support IEEE802.3at Power over Ethernet(PoE+) Power Sourcing Equipment Support 10/100/1000Base-TX Support DIN-Rail & Wall-mount installation. Extensive LED indicatiors for PoE diagnostics Environmentally Hardened -40°C to 75°C (-40°F to 167°F) operating temperature


22EHardened

PoE+ 1G

P Data + Power Data

Ethernet Ethernet

PoE IP Camera

ET-INJ30Network Switch

NVR

OR

DC 48VPower Supply


Acc

esso

ries

76

EthernetStandards:Processing Type:

Forward Filter Rate:Cabling:Maximum Distance:Connector:

IEEE802.3af/at Power over Ethernet ForwardHalf-duplex, Full duplex1,488,000pps (1000Mbps) 1000BASE-TX: Cat5 or aboveCat5 UTP up to 100m2 x RJ45

Electrical and MechanicalInput Power:Power Consumption:PoE: Standard: Port: Max. Power:LED Indicators: Power: PoE:Dimensions (WxDxH):Weight:Casing:Mounting Options:

48~57VDC (Terminal Block)35W Max.

IEEE802.3atRJ4530W Max per port(Alternative B Mode)

Power StatusPoE Status95 x 70 x 30 mm 0.2kgMatel caseDIN-Rail / Wall Mount

Specifications

ET-INJ30 Series



Regulatory ApprovalsISO9001FCC Part 15 Class AEN55022:2006 + A1: 2007 class ASurge Protection: RJ45: 1kV Power: 500V ESD: 4kV/8kV



Acc

esso

ries

77

ET-SPT12V Series Hardened Gigabit 1-port PoE+ In + 1-port Ethernet Data Out PoE Splitter


Model Description

ET-SPT12V Hardened Gigabit 1-port PoE+ In + 1-port Ethernet Data Out PoE Splitter


20W/12VDC output with 2-pin open wire terminal block.

Mounting Options

Power Options

Typical Application

FeaturesGeneral 1 RJ45 PoE PSE Input Port(Data + Power) + 1 RJ45 Ethernet Data Output Port(Data only). Support IEEE802.3at Power over Ethernet(PoE+) Power Sourcing Equipment Support 10/100/1000Base-TX Support DIN-Rail & Wall-mount installation. Extensive LED indicatiors for PoE diagnostics Environmentally Hardened -40°C to 75°C (-40°F to 167°F) operating temperature


22EHardened

PoE+ 1G

DataData + Power

PowerEthernet

IP Camera

ET-SPT12V PoE Network Switch


Acc

esso

ries

78

EthernetStandards:Processing Type:

Forward Filter Rate:Cabling:Maximum Distance:Connector:

IEEE802.3af/at Power over Ethernet ForwardHalf-duplex, Full duplex1,488,000pps (1000Mbps) 1000BASE-TX: Cat5 or aboveCat5 UTP up to 100m2 x RJ45

Electrical and MechanicalOutput Power:Power Consumption:LED Indicators: PoE In: 12V:Dimensions (WxDxH):Weight:Casing:Mounting Options:

20W/12VDC (Terminal Block)25W Max.

PoE PSE Power InDC 12V Output95 x 70 x 30 mm 0.25kgMatel caseDIN-Rail / Wall Mount

Specifications

ET-SPT12V Series



Regulatory ApprovalsISO9001FCC Part 15 Class AEN55022:2006 + A1: 2007 class ASurge Protection: RJ45: 1kV Power: 500V ESD: 4kV/8kV

2www.ot-systems.com


Acc

esso

ries

79

www.ot-systems.com

Acc

esso

ries

ISO 9001:2000

FM 88638


www.ot-systems.com1

MR-C1019" Rack for Micro-type Products


Model Description

MR-C10 19" Rack for Micro-type Products

SpecificationsElectrical and MechanicalInput Power:Output Power:Protections:Dimension (WxDxH):Weight:Mounting:

110~240VAC, 50/ 60Hz40W Max. 3.34A@12VDCShort circuit, Overload, Over Voltage483 x 135 x 44 mm0.7Kg19” Rack, 1U Height


-40ºC to 75ºC (-40ºF tp 167ºF)-40ºC to 85ºC (-40ºF to 185ºF)0% to 95% non-condensing

Acc

esso

ries

FeaturesGeneral Dedicated for Microtype products from various products series Mount in standard 19” cabinets, occupying 1U height Power supply provided Hot-swappable design Environmentally hardened -40°C to 75°C ( -40°F to 167°F) operating temperature Compatible with NHD100Micro, NHD110DRMicro, FTD100Micro, FTD110DBMicro, ET1111, ET1111H, ET1212H and ET1100C Series


80

ET-C1212-slot 19" Rack Mount Chassis for ET Series


Model Description

ET-C12 12-slot 19" Rack Mount Chassis for ET Series

SpecificationsElectrical and MechanicalPower (ET-PSU/5V): Input:

Output:

No. of Empty Slots:Dimension (WxDxH):Weight:Mounting:

110VAC / 60Hz220VAC / 50Hz5VDCMax. Current: 25A12486 x 191 x 134 mm3.1Kg19” Rack, 3U Height


-20ºC to 60ºC (-4ºF tp 140ºF)-40ºC to 85ºC (-40ºF to 185ºF)0% to 95% non-condensing

FeaturesGeneral Supports up to 12 ET Series Card Modules For ET2111 Series Card Module Plug-and-Play / Hot-swappable 19” 3U Rack Mount

ISO 9001:2000

FM 88638

www.ot-systems.com


Acc

esso

ries

81

www.ot-systems.com1

EC-C1419" Rack Mount Chassis for EC1111 and EC1212 series units, 2U, 14 empty slots, with PSU, 110-220VAC input

ISO 9001:2000

FM 88638


Model Description

EC-C14 19" Rack Mount Chassis for EC1111 and EC1212 series units, 2U, 14 empty slots, with PSU, 110-220VAC input

SpecificationsElectrical and MechanicalPower:Input:

Dimension (WxDxH):Weight:Mounting:

100-240VAC,50/60HzMaximum Current: 1.2A

490 x 230 x 90 mm3.5Kg19” Rack, 2U Height

Output: 5VDCMaximum Current: 12A

No. of Empty Slots: 14


-10ºC to 55ºC (-14ºF to 131ºF)-40ºC to 70ºC (-40ºF to 158ºF)5% to 95% non-condensing


Acc

esso

ries

FeaturesGeneral Support up to 14 EC Series Module For EC1111 and EC1212 Series Plug-and-Play / Hot-swappable 19” Rack Mount


coneline

82

SFP Options

SFP Ordering Options

Model Wavelength Description Max.Distance

SMFP3131-03-225F

SSFP3131-13-225F

SIFP3131-13-225S

SIFP5131-13-225S

SWFP3131-13-225S

SWFP5131-13-225S

SMFP3151-13-225F

SSFP3151-13-225F

SIFP3151-13-225S

SIFP5251-13-225S

SWFP3151-13-225S

SWFP5251-13-225S

100M / Multimode / 2-fiber / LC

100M / Singlemode / 2-fiber / LC

100M / Multimode / WDM 1-fiber / LC

100M / Multimode / WDM 1-fiber / LC

100M / Singlemode / WDM 1-fiber / LC

100M / Singlemode / WDM 1-fiber / LC

1G/Multimode/2- fiber/LC

1G/Singlemode/2- fiber/LC

1G/Multimode/WDM 1- fiber/LC

1G/Multimode/WDM 1- fiber/LC

1G/Singlemode/WDM 1- fiber/LC

1G/Singlemode/WDM 1- fiber/LC

2km

20km

2km

2km

20km

20km

1km

20km

550m

550m

20km

20km

1310nm

1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

1310nm

1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

Operating Temperature: -40°C~75°C(-40°F~167°F)



Remarks

www.ot-systems.com


Acc

esso

ries

83

Warranty & RMA Policy

OT Systems Industrial Ethernet & Networking Products Warranty

Warrantee. OT Systems (herein “Seller”) guarantees the integrity of the products sold to buyers or original End Users (herein “Buyers”) as a whole in regards of the usages and applications as stipulated in the product manuals.

Seller warrantees that all finished products manufactured under the brand name of OT Systems shall be free from defects in material and workmanship right upon the ex-factory date and the products shall conform to the Seller’s specifications as published.

1.

OT Systems RMA Policy

RMA (Return Merchandise Authorization) PolicyShould you experience any defects with our products, please complete a RMA request form on our website http://ot-systems.com/online_rma.php or send E-mail to [email protected] to request RMA form prior to returning the products.

1.

Copy of Purchase Order/Proforma Invoice should be enclosed with the returning RMA request form.2.

The purchaser is to bear all delivery charges to the returning products.4.

RMA numbers are valid for 30 days. A new RMA number must be applied if this RMA 30-days period expires.

5.

All in-warranty defective items must have an RMA number and repairs are free of charge.6.

All out-of-warranty items to be repaired must have an RMA number. Charges will be applied and invoice with chargeable items, will be issued to the buyer.

7.

An RMA number will be given to you. This RMA number must accompany the product returned to OT systems. The RMA number should be displayed on the outside of the returning packaging. All returned products without an RMA number will be sent back to the buyer.

3.

Call for Service. To call for warrantee service, first contact Seller’s Customer Service Representative. A Return Merchandise Authorization number (RMA#) will be issued if the returning of the product is deemed necessary. All claims must be in written form with all the particulars which are self-evident to support such claim.

2.

Cost incurred. All freight charges for return shipments of parts or products are at Buyer’s costs.3.

Exclusion. The aforesaid warrantees are exclusive and in lieu of and supersede all other warrantees as appropriate whether written, verbal, implied or statutory. No other implied or statutory warrantee of merchantability or fitness for particular purposes shall apply.

4.

a)

Ethernet & Networking products sold to Buyers are under a 5-YEAR warranty offered by Seller while EC1111, EC1212, EC5100P, EC9100P, EC8200 and all other Accessories are under a 1-YEAR warranty offered by Seller, subject to the exclusion from liability in the occurrence of misuse, abuse or improper handling, vandalism, or any acts in contravention of the instructions, rules, or guidelines as stipulated in the product manuals.

b)

Defective products claimed for warranty will, at the discretion of Seller, be repaired or replaced in part or in whole. All repaired parts or replacements, are under warranty for the remaining period of the original warranty period.

c)

In case that the defects cannot be rectified under the reasonable efforts of Seller, as subject to the availability of all possible resources, Seller is open to negotiation to reach for an equitable solution with the concerned parties.

d)

84

Date post:	23-Feb-2022
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

Media Converters - Belcom

Documents