NEW
SWitzERLAND
AUStRiA
PoLAND
czEch REPUbLic
hUNGARY
UkRAiNE
tURkEY
chiNA
thAiLAND
koREA
Media Data
2010
2 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea �2 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea �
international MM issues
Switzerland SMM Schweizer Maschinenmarkt(German speaking issue) Page 4-5
Switzerland MSM Le Mensuel de l´industrie(French speaking issue) Page 6-7
Austria MM Das österreichische industriemagazinPage 8-9
Poland MM Magazyn PrzemyslowyPage 10-11
turkeyMM Makina MagazinPage 18-19
hungary MM Müszaki MagazinPage 14-15
Ukraine MM Money and technologiesPage 16-17
czech Republic MM Pr°u myslové spektrumPage 12-1�
thailandMM the industrial MagazinePage 26-27
china MM Xiandai zhizaoPage 20-25
korea MM koreaPage 28-29
contact:Winfried burkardSales ManagerMM MaschinenMarktPhone: +49 9�1 418-2686Fax: +49 9�1 418-2022E-mail: [email protected]
2 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea �2 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea �
SwitzerlandVogel Business Media AGSeestraße 95CH-8800 Thalwilcontact partner: Mrs. trudi halama(German, English)Phone: +41 44 722 77 78Fax: +41 44 722 77 01E-mail: [email protected]
Austria Technik & Medien Verlagsges. m.b.H.Hietzinger Kai 175A-11�0 Viennacontact partner: Mr. Franz Lunacek(German, English)Phone: +4� 1 876 8�79 11Fax: +4� 1 876 8�79 15Mobil: +4� 676 848 205 11E-mail: [email protected]
Poland MM Magazyn Przemyslowyul. Dabrówki 16PL-40-081 Katowicecontact partner: Mrs. Agnieszka tyc(Polish, English, German)Phone: +48 �2 �54 1005Fax: +48 �2 �54 1005E-mail: [email protected]
czech Republic MM publishing s.r.o. (Ltd.)Prípotocní 1519/10ACZ-101 00 Praha 10contact partner: Mrs. Gabriela Jedlickova(Czech, English, German)Phone: +420 267 216 42�Fax: +420 267 216 4�0Mobil: +420 608 182649E-mail: [email protected]
hungary Motor-Presse Budapest Lapkiadó Kft.Nagyszölös u. 11-15.111� Budapestcontact partner: Mr. László Molnár(Hungarian, English, German)Phone: +�6 1 577 268�Fax: +�6 1 577 2690Mobil: +�6 �0 257 �157E-mail: [email protected]
Ukraine Softpress Ltd., P.O. Box. 618/80�126 Kiev, Ukrainecontact partner: Mrs. katerina ostrovskaya(Russian, English)Phone: +�80 44 585 82 82Fax: +�80 44 585 82 85E-mail: [email protected]
turkey Dünya Super Veb Ofset A.S.Balamir Sokak No. 7TR-�48�0 Kavacik Beykoz - Istanbulcontact partner: Mr. Yalcin Gür (Turkish, English)Phone: +90 216 681 1805Fax: +90 216 680 �976E-mail: [email protected]
china Beijing Jigong Vogel Media Advertising Co., Ltd.No. 1, Bai Yun Road 11 F, Xicheng District Beijing, Beijing-100045PR CHINAcontact partner: Mrs. Xiurong Wang (German, English, Chinese)Phone: +86 10 6��2 6076Fax: +86 10 6��2 6099E-mail: [email protected]
thailand Green World Media (Thailand) Co. Ltd.244, Ladprao 107, Klongchan Bangkapi Bangkok 10240, Thailandcontact partner: Mr. Sumate kittitheerapornchai(English)Phone: +66 2 �78 2�88Fax: +66 2 769 8120E-mail: [email protected]
korea ACROSS-DEXIOR CAPITAL CO., LTD.#807, Tower Crystal Bldg., 1008-1 Daechi-dong Gangnam-gu, Seoul 1�5-851, Koreacontact partner: Mrs. Yong-Ran Eun(English)Phone: +82 2 2052 ���8Fax: +82 2 2052 �552Mobil: +82 10 7192 5964E-mail: [email protected], [email protected]
the printing material will be handled directly by our publishing partners abroad.Please send your printing material to the following address (if possible in the respective foreign language):
We can also translate your advertisement into the respective foreign language. We therefore charge our cost price. Please send your advertisement text as an open file in time for the booking deadline to the address below.
Digital printing material:PDF, optimised for print on CD-ROM + proof, or by E-mail, or ISDN
business terms and conditionsplease find also at www.maschinenmarkt.de/business-terms
technical information
Scope: Industry
Size of magazine: 210 x 297 mm (Width x Height), DIN A 4
type Area: 185 mm x 267 mm, 6 columns each 29 mm wide
Printing material, printing, binding:Digital printing material (please see on page �), offset printing, perfect binding
Advertising fractional sizes and rates:
Rate card no. 011, valid from 01/01/2010
characteristics:Leading technical magazine for the capital goods industry. Provides Technical Information and ideas for management and staff on subjects such as production, automation, welding, driving-moving-controlling, fluid mechanics, sensor systems, materials and surface finishing, material flow, logistics, maintenance, process installations, design, machine elements, operating efficiency, joining and fastening, subcontracting industry, design engineering and CAx.
target group:Technical and commercial managers, decision-makers in all industrial enter-prises, specialists in technical schools, research and development institutes.
Frequency: bi-weekly
Printed circulation: 14,400 copies
total net paid circulation: 2,419 copies; of these subscriptions: 2,304 copies; of these free copies: 115; free circulation: 9,684 copies (WEMF-audited 2008)* * WEMF is an independent company dealing with media research and is responsible for the circulation control of printed publications in Switzerland.
Place of publication: Thalwil/CH
Publisher: Vogel Business Media AG
Switzerland(German speaking issue)
SMM Schweizer Maschinenmarkt
SMM/MSM-GUiDE Purchasing guide for the Swiss industry– divided into subject areas. Frequency: annually (November)circulation: 8,000 copiesMedia-Data on request
www.smmguide.chwww.msmguide.ch
Readership analysis by branch:
page 2-coloured € 4-coloured €
1/1 4��.– 1.097.–
1/2 27�.– 6�0.–
1/� 27�.– 6�0.–
1/4 200.– �9�.–
1/8 67.– 100.–
Size Width x Height (mm) Columns Basic price €
1/1 page 185 x 267 6 2,�45.–
1/2 page 90 x 267185 x 1�1
�6
1,192.–
1/� page 59 x 267122 x 1�1185 x 85
246
861.–
1/4 page 90 x 1�159 x 199
185 x 6�122 x 97
�264
6�5.–
1/8 page 59 x 9790 x 6�
185 x 29122 x 46
2�64
��6.–
Inside front cover and inside back cover
185 x 267 6 �,669.–
Back cover 185 x 267 6 4,259.–
Extra charge for special positions:Must special position: 10 % on top of the gross rate b/wPosition in the text: 25 % on top of the gross rate b/wAdvertisement: 100 % on top of the gross rate b/wIsland position: �00 % on top of the gross rate b/w
colour charges: For each additional colour according to the European colour pattern
Extra charges for special sizes:
Double page spread:b/w € 2c € 4c € 4,49�.– 4,976.– 5,6�9.–
Junior page: b/w (Size 148 x 204 mm) 1,445.– € (Colour charges as 1/2 page)
Reductions: (for insertions placed within the space of a year)
Series contract:� times 6 times 1� times 24 times 6 % 12 % 18 % 24 %
orders running longer than one year: Please enquire about terms
bound inserts and loose inserts: on request
classified adverts (MM börse):�.40 € for 2 columns (59 mm wide and 1 mm high) 4.10 € with red as 2nd colour; 2, 4, or 6 columns.
Electronic advertising on: www.smm.ch(e.g. Banner) on request
Prices are subject to change.
4 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 5
SMM Schweizer Maschinenmarkt Publication Programme 2010
issue No.
Publication Date
booking Deadline topics/Dossiers trade Fairs
1/2 20 Jan. 8 Jan. Automation and drive technology Supply industry, plastics Dossier: Maintenance
Euroguss, 19-21 January, D-NurembergAutomations Schweiz, �-4 February, CH-LuzernMaintenance Schweiz, 10-11 February, CH-Zurich
3 3 Feb. 22 Jan. Production engineering, Supply industry Dossier: Automation and drive technology
Metav, 2�-27 February, D-Dusseldorf
4 17 Feb. 5 Feb. Logistics, Production engineering Dossier: Design engineering and cAx
Logimat, 2-4 March, D-Stuttgart
5 3 March 19 Feb. Automation and drive technology Dossier: Production engineering, grinding
Grindtec, 17-20 March, D-Augsburg
6 17 March 5 March Supply industry, Sheet metal forming incl. connection and welding technology Dossier: Medical engineering
tube and Wire, 12-16 April, D-DusseldorfMedtec, 2�-25 March, D-Stuttgart
29 March 2 March Special issue for Southern Germany (supplement in MM MaschinenMarkt, Germany)
7 31 March 19 March Production engineering, Logistics and materials handling Dossier: Design engineering and cAx
8 14 April 31 March Automation and drive technology Supply industry, materials
hANNovER MESSE, 19-2� April, D-HanoverResale, 21-2� April, D-Karlsruhe
9 28 April 16 April trade fair preview: Siams Production engineering, Automation and drive technology Dossier: Measurement technology
control, 4-7 May, D-StuttgartSiams, 4-8 May,CH-Moutier
10 12 May 30 April Materials technology Logistics and materials handling Sheet metal forming incl. connection and welding technology Dossier: Laser technology
Sensor+test, 18-20 May, D-NurembergLasys, 8-10 June, D-Stuttgarto&S, 8-10 June, D-StuttgartEPhJ/EPMt, 8-11 June, CH-Lausanne
11 26 May 12 May trade fair review: hANNovER MESSEAutomation and drive technology, Supply industry, Production engineering
Automatica, 8-11 June, D-MunichProduktion und Design, 2-� June, CH-St. Gallen
12 9 June 28 May trade fair review: SiamsSheet metal forming incl. connection and welding technology Production engineering and supply industry Dossier: Design engineering and cAx
Swisst.meeting, 24-25 June, CH-Zurich
13 23 June 11 June Logistics, Materials technology, Medical engineering Dossier: Processing demanding materials
14/15 7 July 25 June trade fair review: Automatica Munich Robotics for modern production, Production engineering, Logistics
16 4 Aug. 23 July Main annual issue: „trends and innovations“ – German/French – high-volume circulation: 22,900 ex.
17 18 Aug. 6 Aug. Supply industry /materials technology Dossier: Sheet metal forming incl. connection and welding technology
18 1 Sept. 20 Aug. trade fair preview: MotekAutomation, assembly, handling, Production engineering Dossier: Production measurement technology
Motek, 1�-16 September, D-Stuttgartcomposites, 14-16 September, D-EssenAluminium, 14-16 September, D-Essen
19 15 Sept. 3 Sept. trade fair preview: AMbProduction engineering, Supply industry Dossier: Design engineering and cAx
AMb, 28 September - 2 October, D-Stuttgart
20 29 Sept. 17 Sept. Logistics/ materials handlingSupply industry/production Dossier: Automation and drive technology
Materialica, 12-14 October, D-MunichParts2clean, 12-14 October, D-Stuttgartinterpart, Surfacts, 7-9 October, D-Karlsruhe
21 13. okt 1 oct. Sheet metal forming incl. connection and welding technology Design engineering and CAx Dossier: k-2010
Euroblech, 26-�0 October, D-Hanoverk-Messe, 27 October - � November, D-Dusseldorf
25 oct. 1 oct. Special issue for Southern Germany (supplement in MM MaschinenMarkt, Germany)
22 27 oct. 15 oct. trade fair preview: Swisstech/Prodex Production engineering and supply industry Automation, materials
vision, 9-11 November, D-StuttgartArbeitsSicherheit, 10-11 Nov., CH-BaselSwisstech, 16-19 November, ch-baselProdex, 16-20 November, ch-baselNanoEurope, 25-26 Nov., CH-St.Gallen
23 10 Nov. 28 oct. trade fair issue: Swisstech/Prodex Production engineering and supply industry Automation, materials technology increased circulation: 16,000 ex.
Swisstech, 16-19 November, ch-baselProdex, 16-20 November, ch-baselcompamed, 17-19 November, D-DusseldorfSPS/iPc/Drives, 2�-25 November, D-Nuremberg
24 24 Nov. 12 Nov. Automation and drive technology, Logistics and materials handling Dossier: Medical engineering
turn&milltec, 1-4 December, D-FrankfurtEuromold, 1-4 December, D-Frankfurt
26 Nov. 4 oct. SMM/MSM Guide – buyers guide for the Swiss industry – German/French – circulation: 8,000 ex.
25/26 8 Dec. 26 Nov. Supply industry/production engineering, Materials technology Sheet metal forming incl. connection and welding technology
1/2 19 Jan. 2011
7 Jan. 2011
trade fair review: Swisstech/Prodex Supply industry, Production engineering, Automation
4 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 5
Switzerland(French speaking issue)
MSM Le Mensuel de l’industrie
Readership analysis by branch:
characteristics:Leading technical magazine for the capital goods industry in the French speaking part of Switzerland. Provides monthly Technical Information and ideas for management and staff on subjects such as production, automation, materials, surface finishing, material flow, logistics and subcontracting industry.
target group:Technical and commercial managers, decision-makers in all industrial enter-prises, specialists in technical schools, research and development institutes.
Frequency: monthly
Printed circulation: 8,500 copies
total net paid circulation: 1,217 copies; of these subscriptions: 1,159 copies; of these free copies: 58; free circulation: 5,928 copies (WEMF-audited 2008)* * WEMF is an independent company dealing with media research and is responsible for the circulation control of printed publications in Switzerland.
Place of publication: Thalwil/CH
Publisher: Vogel Business Media AG
Scope: Industry
Size of magazine: 210 x 297 mm (Width x Height), DIN A 4
type Area: 185 mm x 267 mm, 6 columns each 29 mm wide
Printing material, printing, binding:Digital printing material (please see on page �), offset printing, perfect binding
Advertising fractional sizes and rates:
Rate card no. 011, valid from 01/01/2010
MSM/SMM-GUiDE Purchasing guide for the Swiss industry– divided into subject areas. Frequency: annually (November)circulation: 8,000 copiesMedia-Data on request
www.smmguide.chwww.msmguide.ch
Size Width x Height (mm) Columns Basic price €
1/1 page 185 x 267 6 2,�45.–
1/2 page 90 x 267185 x 1�1
�6
1,192.–
1/� page 59 x 267122 x 1�1185 x 85
246
861.–
1/4 page 90 x 1�159 x 199
185 x 6�122 x 97
�264
6�5.–
1/8 page 59 x 9790 x 6�
185 x 29122 x 46
2�64
��6.–
Inside front cover and inside back cover
185 x 267 6 �,669.–
Back cover 185 x 267 6 4,259.–
Extra charge for special positions:Must special position: 10 % on top of the gross rate b/wPosition in the text: 25 % on top of the gross rate b/wAdvertisement: 100 % on top of the gross rate b/wIsland position: �00 % on top of the gross rate b/w
colour charges: For each additional colour according to the European colour pattern
page 2-coloured € 4-coloured €
1/1 4��.– 1.097.–
1/2 27�.– 6�0.–
1/� 27�.– 6�0.–
1/4 200.– �9�.–
1/8 67.– 100.–
6 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 7
Extra charges for special sizes:
Double page spread:b/w € 2c € 4c € 4,49�.– 4,976.– 5,6�9.–
Junior page: b/w (Size 148 x 204 mm) 1,445.– € (Colour charges as 1/2 page)
Reductions: (for insertions placed within the space of a year)
Series contract:� times 6 times 1� times6 % 12 % 18 %
orders running longer than one year: Please enquire about terms
bound inserts and loose inserts: on request
classified adverts (MM börse):�.40 € for 2 columns (59 mm wide and 1 mm high) 4.10 € with red as 2nd colour; 2, 4, or 6 columns.
Electronic advertising on: www.msm.ch(e.g. Banner) on request
Prices are subject to change.
MSM Le Mensuel de l’industrie Publication Programme 2010
issue No.
Publication Date
booking Deadline topics/Dossiers trade Fairs
1/2 4 Feb. 22 Jan.
Production and tool engineeringSupply industryAutomation, control technologyLogistics¢ Dossier: Automation
Simodec, 2-6 March, F-La Roche-sur-Foron
3 4 March 19 Feb.
Production engineeringIndustrial informaticsSupply industryConnection technology¢ Dossier: Horology
SWi-Schweissseminar, � March, CH-YverdonGrindtec, 17-20 March, D-Augsburgbaselworld, 18-25 March, CH-Baselindustrie Paris, 22-26 March, F-ParisMedtec, 2�-25 March, D-Stuttgart
4 1 April 19 March
trade fair preview: hANNovER MESSEtrade fair preview: Medtec FranceIndustrial electronicsSupply industryAutomation, control technologyMaterials, processing¢ Dossier: Medical engineering
JEc composites Show, 1�-15 April, F-ParishANNovER MESSE, 19-2� April, D-HanoverMedtec France, 21-22 April, F-Besançon
5 29 April 16 April
trade fair preview: SiAMSProduction engineeringIndustrial electronicsSupply industryAutomation, control technology¢ Dossier: Industrial informatics
SiAMS, 4-8 May, CH-MoutierbiEMh, �1 May - 5 June, E-Bilbao
6 3 June 20 May
trade fair preview: EPhJ/EPMt Sheet metal formingIndustrial informaticsSupply industryMaterials, processing¢ Dossier: Horology
EPhJ, 8-11 June, CH-LausanneEPMt, 8-11 June, CH-Lausanne
7 1 July 18 June
trade fair review: SiAMS 2010Production engineeringSupply industryLogistics¢ Dossier: Medical engineering
8 4 Aug. 23 July Main annual issue: „trends and innovations“ – Review EPhJ/EPMt – German/French – high-volume circulation: 22,900 ex.
9 2 Sept. 20 Aug.
trade fair preview: MicronoraProduction engineeringIndustrial electronicsSupply industryAutomation, control technology¢ Dossier: Horology
technopolis, 8 September, CH-LausanneMicronora, 28 September - 1 October, F-BesançonAMb, 28 September - 2 October, D-Stuttgart
10 7 oct. 24 Sept.
Sheet metal formingSupply industryMaterials, processingLogistics¢ Dossier: Automation
Materialica, 12-14 October, D-MunichEuroblech, 26-�0 October, D-Hanoverk-Messe, 27 October - � November, D-Dusseldorf
11 4 Nov. 21 oct.
trade fair preview: Swisstech/ProdexIndustrial electronicsSupply industryAutomation, control technologyConnection technology¢ Dossier: Medical engineeringIncreased circulation: 9,500 ex.
Swisstech, 16-19 November, CH-BaselProdex, 16-20 November, CH-Basel
26 Nov. 4 oct. MSM/SMS-Guide – buyers guide for the Swiss industry – German/French – circulation: 8,000 ex.
12 2 Dec. 19 Nov.
Production engineeringIndustrial informaticsSupply industryMaterials, processing¢ Dossier: Horology
Euromold, 1-4 December, D-Frankfurtturn&milltec, 1-4 December, D-Frankfurt
6 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 7
Austria
Rate card no. 016, valid from 01/01/2010
Scope: Industry
Size of magazine: 210 x 297 mm (Width x Height), DIN A 4
type Area: 190 mm x 270 mm 4 columns each 46 mm wide
Printing material, printing, binding:Digital printing material (please see on page �), offset printing, perfect binding
Advertising fractional sizes and rates: (1c=4c)
MM Das österreichische industriemagazin
characteristics:MM Das österreichische industriemagazin is the polytechnical magazine for the Austrian industry.MM Das österreichische industriemagazin presents business and company information, feature articles and new product reviews from the fields of production engineering, automation, electrical engineering, drive and transmission, instruments, logistics, handling and storage and plastics.This extensive offering is rounded off by special sections from the Technical University of Austria or by field-spread subjects, e.g. economics and related topics.
target group:Decision makers in small, medium and large companies of the Austrian capital goods industry, the capital goods trading sector and technical services. Target groups are reached by a system of alternating distribution based on the specific contents of each issue.
Frequency: 12 times a year
circulation: 10,500 copiesPlace of publication: Vienna, AustriaPublisher: Technik & Medien Verlagsges.m.b.H.
Distribution by industry sector:
Power engineering, mining 4 %Chemical industry 4 %Plastics and rubber processing 5 %Other industries 2 %Metal production/metal working 2� %Steel and tank construction � %Mechanical engineering 21 %Vehicle construction � %Electrical engineering and electronics 20 %Precision mechanics/optical instruments 2 %Iron, sheet and metal processing 2 %Trade with technical goods 4 %Traffic and communication 1 %Consulting engineers � %Other services 2 %Science, research, organisations 1 %
total 100 %
Size Width x Height (mm) Columns Basic price €
1/1 page 190 x 270 4 4,294.50
2/� page 190 x 180126 x 270
42
�,612.00
1/2 page 94 x 270190 x 1�4
24
2,551.50
1/� page 190 x 8862 x 270
41
1,95�.00
1/4 page 190 x 6694 x 1�446 x 270
421
1,428.00
1/8 page 94 x 6646 x 1�4
190 x �2
214
819.00
Extra charge for special positions:Back cover : 25 % Inside front and back cover: 20 % Other positions (minimum 1/4 page): 15 %
Extra charges for special sizes:Consecutive pages recto/verso and double pages (up to 4 colours according to the European colour pattern)
consecutive pages recto/verso: price on request
Double page spread: 6,441.75 €
Junior page: (Size 1�6 x 190 mm) �,045.00 €
Front page: 6,174.00 €
Reductions: (for insertions placed within the space of a year)
Space contract:1 page 2 pages 4 pages 8 pages5 % 10 % 15 % 20 %
Series contract:� times 5 times 10 times 15 times5 % 10 % 15 % 20 %
bound inserts and loose inserts: on request
classified adverts (MM börse):4.00 € for a single line (46 mm wide and 1 mm high) smallest size 46 x 50 mm or 92 x 25 mm.10.– € charge for box no.
Electronic advertising on: www.technik-medien.at www.maschinenmarkt.at(e.g. Banner) on request
Prices are subject to change.
8 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 9
Editorial calendar and Editorial Environment for Advertisements
MM Das österreichische industriemagazin Publication Programme 2010
issue No.
PublicationDate
booking Deadline/Printing Material Fairs, Exhibitions
1 26 Jan. 22 Dec. 2009 p MEtAv, 2�-27 February, Dusseldorf p LogiMAt, 2-4 March, Stuttgart p cebit, 2-6 March, Hannover
2 15 Feb.25 Jan. p embedded world, 2-4 March, Nuremberg p ihM profi, �-7 March, Munich
p EMv, 9-11 March, Dusseldorf p Grindtec, 17-20 March, Augsburg
3 12 March 19 Feb. p wire & tube, 12-16 April, Dusseldorf p paintExpo, 1�-16 April, Karlsruhep RESALE, 21-2� April, Karlsruhe p cRoSS coN, 27-29 April, Vienna
4 12 April 16 Marchl hANNovER MESSE, 19-2� April2010 p PciM Europe, 4-6 May, Nuremberg p coNtRoL, 4-7 May, Stuttgart p SENSoR + tESt, 18-20 May, Nuremberg p cARboN EXPo, 26-28 May, Cologne MEtAv, Report
5 17 May 22 Aprilp SMt/hybrid/Packaging, 8-10 June, Nuremberg p Automatica, 8-11 June, Munich p oPtAtEc, 15-18 June, Frankfurt/Main p euroSUPPLY, 15-17 June, Salzburg p euroLitE, 8-10 June, Nuremberg hANNovER MESSE, 1th report
6/7 16 June 25 May p Stanztec 2010, 22-24 June, Pforzheim hANNovER MESSE, 2nd report
8 13 Aug. 23 July p MSv 2010, 1�-17 September, Brünn p Motek 2010, 1�-16 September, Stuttgart p ALUMiNiUM, 14-16 September, Essen
9 7 Sept. 16 Aug. p AMb, 28 September - 2 October, Stuttgart p parts2clean, 12-14 October, Stuttgart p MAiNtAiN, 12-14 October, Munich p discuss & discover, 19-21 October, Munich
10Avienna-tec 1 oct.. 10 Sept.
l vienna-tec, Trade Fair for Manufacturing Technology and Automation, 12-15 October, Viennap MAtERiALicA, 19-21 October, Munich p EurobLEch, 26-�0 October, Hannover p k 2010, 27 October - � November, Dusseldorf
10 22 oct. 30 Sept.p viSioN 2010, 9-11 November, Stuttgart p hYbRiDicA 2010, 9-12 November, Munich p Qualipro 2010, 16-19 November, Dortmund p SWiSStEch, 16-19 November, Basel p PRoDEX, 16-20 November, Basel
11 12 Nov. 20 oct. l SPS/iPc/DRivES, 2�-25 November, Nuremberg p EuroMold, 1-4 December, Frankfurt/Main p turn&milltec, 1-4 December, Frankfurt/Main vienna-tec, 1th report
12 6 Dec. 15 Nov. EurobLEch, Report k 2010, Report SPS/iPc/DRivES, Report vienna-tec, 2nd report
Legend: p trade fair advance notice l trade fair preview trade fair report
topics issues 1 2 3 4 5 6/7 8 9 10A 10 11 12Manufacturing technology
Machine tools, metal cutting, forming, tools
Spec
ial i
ssue
: Pum
ps
u u u u u u u uJoining technology, surfaces, measurement systems, quality assurance u u u u u u u u
cA technologies CAD/CAM, CAP, CAQ, CAE u u u uAutomation Assembly, handling, industrial robots u u u u u u u
Control technology, SPS, PPS, barcode, sensorics u u u u u u u u
Drive systems Mechanical drive elements, hydraulics, pneumatics u u u u u u u
Transmissions, motors, electrical and mechanical drive systems u u u u u u u
Machine building
General machine building, plant construction u u u
Logistics Material handling and storage, packaging, material flow u1) u u u u2) u
Plastics engineering
Tools, semi-finished parts, mould making and tooling u u u u
Electrical engineering
Installation, machines u u u u u u uMeasurement systems, security u u u u u u
Special: industrial safety and security u u u u
u1) with LogiMAt Special u2) with intralogistics Journal
Spec
ial i
ssue
vien
na-te
cM
anuf
actu
ring
tech
nolo
gy,
wel
ding
, aut
omat
ion,
driv
es,
elec
trica
l & m
easu
rem
ent s
yste
ms
8 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 9
Poland
MM Magazyn Przemyslowy
characteristics:
MM Magazyn Przemyslowy is the leading technical magazine for managers and engineers in the Polish industry. MM Magazyn Przemyslowy is published and distributed in Polish language by Vogel Business Media sp.zo.o.
Printed circulation: 7,000 copies
Frequency: monthly
Place of publication: Katowice/PL
Publisher: Vogel Business Media sp.zo.o.
Scope: Industry
Size of magazine: 210 x 297 mm (Width x Height), DIN A 4
type Area: 190 mm x 270 mm, 4 columns each 46 mm wide
Printing material, printing, binding:Digital printing material (please see on page �), offset printing, perfect binding
Advertising fractional sizes and rates: (1c=4c)
Rate card no. 017, valid from 01/01/2010
Distribution by industry sector:
Metal production / Metal processing 24 %
Machine building 22 %
Automation and electro technology 16 %
Plastics, plastics processing, chemical industry 9 %
IT technologies 6 %
Energetics 5 %
Transport, logistics, storage techniques 4 %
Construction engineering 4 %
Mining � %
Environmental protection, ecology 2 %
Industrial safety 2 %
Research and development 1 %
Science, technical universities, libraries 1 %
Other branches 1 %
total 100.0 %
Size Width x Height (mm) Columns Basic price €
1/1 page 190 x 270 4 �,020.–
1/2 page 94 x 270190 x 1�4
24
1,71�.–
1/� page 190 x 8862 x 270
41
1,150.–
1/4 page 190 x 6694 x 1�446 x 270
421
980.–
1/8 page 94 x 6646 x 1�4
190 x �2
214
570.–
colour charges: (none up to full colour) Standard colours according to the European colour pattern
Extra charge for special positions:Back cover : 25 % Inside front and back cover: 20 % Other Positions: 15 %
Extra charges for special sizes:Consecutive pages recto/verso and double pages (up to 4 colours according to the European colour pattern)
consecutive pages recto/verso: 2 pages 4,575.– € 4 pages 8,07�.– €
Double page spread: 6,040.– €
Junior page: (Size 1�6 x 190 mm) 2,100.– €
bleed charges: for all sizes, also for single-side bleed only �02.– €
Reductions: (for insertions placed within the space of a year)
Space contract:1 page 2 pages 4 pages 8 pages5 % 10 % 15 % 20 %
Series contract:� times 5 times 10 times 15 times5 % 10 % 15 % 20 %
orders running longer than one year: Please enquire about terms
bound inserts and loose inserts: on request
classified adverts (MM börse):2.90 € for a single line (46 mm wide and 1 mm high) plus translation costs, smallest size 46 x 50 mm or 94 x 25 mm. 10.00 € for box no.
Electronic advertising on: www.magazynprzemyslowy.com(e.g. Banner) on request
Prices are subject to change.
10 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 11
MM Magazyn Przemyslowy Publication Programme 2010
issue PublicationDate
bookingDeadline Main topics Additional topics (and Reports) Fairs and conferences
1/2 29 January
25 January
Energetics and renewable energies
Automation and robotics Hydraulics and pneumatics Oils and lubricants for machine building Lean Manufacturing and quality systems Metal-cutting manufacturing Sheet metal and steel processing Rapid prototypingIndustrial fairs and events in 2010 (Report)
ENEX (kielce) – Trade fair for renewable energies, 2-4 MarchEkotEch (kielce) 2-4 MarchPNEUMAticoN (kielce) 2-4 March
3 26 February
22 February
Automation and measurement technology
Hand toolsEnergeticsWelding and sheet metal formingMaterial processingLogisticsMachine toolsPunching technologyPainting and anti-corrosion technologyIndustry and environmentThe economy in Poland in 2009 (report)
AUtoMAticoN (Warsaw) 2�-26 MarchStoM (kielce) 2�-26 MarchcoNtRoL-StoM (kielce) 2�-26 MarchSPAWALNictWo (kielce) 2�-26 MarchEXPo-SURFAcE (kielce) 2�-26 March
4 26 March
22 March
Sheet metal forming
Installations Processing of demanding materials Machine tools for metal processing Automation and robotics Hydraulics and pneumatics Paper and wood industry LogisticsOils and lubricants for industrial applications (Report)
bLAch-tEch-EXPo (krakow) 21-2� OctoberLoGiStEX (Sosnowiec) 1�-15 April
5 23 April
19 April
transport, logistics and road construction infrastructure
Metal-cutting manufacturing Metallurgy Cables and transducers IT systems for the industryPlastics processing (Report)
AUtoStRADA-PoLSkA (kielce) 11-14 MayPlastPoL (kielce) 25-28 May
6/7 25 May
18 May
Metal processing
Industrial safety Hydraulics and pneumatics Automation and robotics Measurement systems CAD/CAM/CAE Logistics Industry and environmentQuality systems (ISO, TQM, Lean Manufacturing) (Report)
itM PoLSkA (Poznan) 8-11 June
8/9 31 August
24 August
Energetics and mining
Logistics Lean Manufacturing and quality systems Paining and anti-corrosion technology Certification and expertise Industrial safety Metal-cutting manufacturing Forming CAD/CAM/CAE IT systems for the industry Measurement and testMetallurgy (Report)
EnergetAb (bielsko-biała) 2010MiningEXPo (Sosnowiec) 2010controltEch (kielce) 2010tooLEX (Sosnowiec) 29 September - 1 October
10 28 September
21 September
Machine tools for metal processing
Automation and robotics Hydraulics and pneumatics Metal processing Welding Energetics IT systems for the industry Industry and environment LogisticsFuel market (Report)
hPS (katowice) 19-21 OctoberEURotooL (krakow) 6-8 October
11/12 4 November
28 october
it in the industry
Measurement and test Metallurgy Intralogistics and logistics Automation and robotics Hydraulics and pneumatics Lubricants and coolants Anti-corrosion technology Technical machine monitoring Metal machine tools Financing services for the industryMachine building industry (Report)
RubPlasr EXPo (Sosnowiec) 16-18 NovemberhAP EXPo (Sosnowiec) 16-18 Nov.WiRtotEchNoLoGiA (Sosnowiec) 16-18 NovembertUM (Sosnowiec) 16-18 NovemberSteelMEt (Sosnowiec) 24-26 Nov. SurfPRotEct (Sosnowiec) 24-26 November
10 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 11
czech Republic
characteristics:MM Pr° umyslové spektrum is a technical magazine for the management in the Czech industry.
MM Pr° umyslové spektrum presents plenty of up-to-date information from industry and reports on new trends and trade fairs etc., not only from the Czech Republic itself but from around the world.
target groups: are reached by a system of alternating distribution based on the specific content of each issue.
circulation: 11,000 copies (8,000 for Czech Republic and �,000 for Slovakia)
Frequency: 10 times a year
Place of publication: Prague/Cz
Publisher: MM publishing s.r.o (Ltd.)
target Group by industry:
Metal production/metal working 26 %Mechanical engineering 20 %Automation and electrical engineering 15 %Logistics and transportation industry 9 %Plastics and rubber processing, chemical industry 8 %Science & research, technical universities 7 %Power engineering 5 %Automotive industry, vehicle construction 5 %Precision mechanics/optical instruments � %Other industry 2 %
total 100 %
Readership analysis:Top management 29 %Design, processes, R & D 22 %Commercial section, marketing dep. 20 %Engineering section management 17 %QA/QC, manufacturing 7 %Other 5 %
total 100 %
Scope: Industry
Size of magazine: 210 x 297 mm (Width x Height), DIN A 4
type Area: 180 mm x 270 mm, 4 columns each 46 mm wide
Printing material, printing, binding:Digital printing material (please see on page �), offset printing, perfect binding
Advertising fractional sizes and rates: (1c=4c)
Extra charges for special sizes:Consecutive pages recto/verso and double pages, (up to 4 colours according to the European colour pattern):
consecutive pages recto/verso: 2 pages 4,575.– € 4 pages 8,07�.– €
Double page spread: 6,040.– €
Junior page: 2,100.– €(Format: Standard 1�4 x 210 mm, with bleed 155 x 216 mm)
bleed charges: for all sizes, also for single-side bleed only �02.– €
Reductions: (for insertions placed within the space of a year)
Space contract:1 page 2 pages 4 pages 8 pages5 % 10 % 15 % 20 %
Series contract:� times 5 times 10 times 15 times5 % 10 % 15 % 20 %
bound inserts and loose inserts: on request
classified adverts (MM börse):2.90 € for a single line (46 mm wide and 1 mm high) plus translation costs, smallest size 46 x 50 mm or 94 x 25 mm. For box no. 10.– €
Electronic advertising on: www.mmspektrum.com(e.g. Banner) on request
Prices are subject to change.
Rate card no. 016, valid from 01/01/2010
colour charges: (none up to full colour) Standard colours according to the European colour pattern
Extra charge for special positions:Back cover : 25 % Inside front and back cover: 20 % Other Positions: 15 %
SizeStandard formatsWidth x Height (mm)
With bleedWidth x Height (mm)
Columns Basic price €
1/1 page 180 x 270 216 x �0� 4 �,020.–
1/2 page 88 x 270180 x 1�2
109 x �0� 216 x 16�
24
1,7�0.–
1/� page 58 x 270180 x 82
79 x �0� 216 x 11�
41
1,150.–
1/4 page 88 x 1�2180 x 64
46 x 270
109 x 16� 216 x 95 6� x �0�
421
980.–
1/6 page 118 x 60180 x 40
1�9 x 91216 x 71
41
6�0.–
1/8 page 88 x 6446 x 1�4
180 x �2
109 x 95 6� x 165
216 x 6�
214
570.–
MM Pru° myslové spektrum
12 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 1�
Publication Programme 2010
issue No.
PublicationDate
bookingDeadline Main topics Specials Fairs and Exhibitions
1/2 3 February
11 January
Plastics: materials and productsTransmissions, bearings and clutchesMachine building: market and financing
3 3 March
8 February
New developments in surface technology Separation and joining technology (warm)
MM Science Journal
4 30 March
8 March
Automatic manufacturing systems for machine building Electrical engineering and electronics
AMPER – International trade fair for electrical engineering and electronics, CZ-Prague, 1�-16 April 2010
5 26 April
2 April
Cutting tools and materials for metal and wood processing Modern materials for machine building
6 17 May 26 April
New machine technologies and machines for metal and wood processing CNC control systems Linear measurement systems
MM Science Journal
MSv Nitra Slowakei – Trade fair for machine building in Slovakia 25-28 May 2010
7/8 22 June 31 May
Pneumatic and hydraulic systems Pumps and fittings Electro-discharge machinging techniques
9 1 September
9 August
Trade fair issue MSV – 52. international trade fair for machine building, and IMT, Brno (1� - 17 September 2010)
Special: Presentation of the members of the Association of Manufacturers and Suppliers for Engineering/Machine Building Systems at 52. MSV (IMT) Brno
MSv und iMt – 52. International trade fair for machine building, CZ-Brno, 1�-17 September 2010
MM Special
September 2010
July 2010*
Design of cNc Machine tools (construction engineering) Author: Prof. Marek et al.
10 20 october
27 September
Industrial maintenance Measurement systems for process engineering Quality control and standards (TQM) Coolants and lubricants
MM Science Journal
11 18 November
25 october
Forming Separation and joining technology (cold) Molding (injection and transfer molding)
Software for machine building, CAD/CAM systems incl. www presentation
12 14 December
22 November
New manufacturing techniques, machines and cutting tools, materials for metal processing
Special: Production program of members of the Association of Manufacturers and Suppliers for Engineering/Machine Building Systems 2011MM Science Journal
in all issues this topics are presented:
Production engineering Machine tools tools
Materials cAD
MM Pru° myslové spektrum
* Advertising formats: 1/1 or 1/2 page (180x1�2 mm)
12 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 1�
hungary
MM Müszaki Magazin
characteristics:MM Müszaki Magazin is Hungary’s leading, independent technical magazine.MM Müszaki Magazin presents business information, feature articles and news about national and international products, innovations and developments of use to manufacturers and users, sales stuff and buyers.
target group: Managers and professional development engineers and users in industry, the crafts and trade.
Printed circulation: 8,000 copies
Frequency: 10 times a year (2 double issues 1/2, 7/8) Place of publication: Budapest/H
Publisher: Motor-Presse Budapest Lapkiadó Kft.
Geographical distribution: (see page 15)
Distribution by industry sector:
Mechanical engineering, metalworking, precision tools, automation, drive systems, hydraulics, pneumatics, fluidics, mounting and assembly lines, C-Technologies 47.2 %
Electrical engineering, industrial electronics, micro-electronics, electrical elements, electronic components, optoelectronics, sensors 10.2 %
Measurement and control, instrumentation, process control, safety 11.1 %
Water, gas, oil, electric power (and their generation and distribution), water treatment and purification, recycling, environmental protection 12.9 %
Heating, air-conditioning, installation, sanitation, lighting technique 2.4 %
Telecommunication, computing, information and organisation systems, office systems 6.1 %
Local authorities, other business sectors �.5 %
Vehicle Industry 6.6 %
total 100.0 %
Rate card no. 016, valid from 01/01/2010
Scope: Industry
Size of magazine: 210 x 297 mm (Width x Height), DIN A 4
type Area: 190 mm x 270 mm, 4 columns each 46 mm wide
Printing material, printing, binding:Digital printing material (please see on page �), offset printing, saddle stitching
Advertising fractional sizes and rates: (1c=4c)
colour charges: (none up to full colour) according to the European colour pattern
Extra charge for special positions:Back cover 25 %Inside front and back cover 25 %Other Positions 10 %
MM cover Page Story
4 pages 5,600.– €8 pages 7,�00.– €
Extra charges for special sizes:Consecutive pages recto/verso and double pages, (up to 4 colours according to the European colour pattern):
consecutive pages recto/verso:2 pages 4,575.– €4 pages 8,07�.– €
Double page spread: 6,040.– €
Junior page: 2,�60.– €(Format: Standard 1�6 x 190 mm, with bleed 142 x 210 mm)
bleed charges for all sizes, also for single-side bleed only �02.– €
Reductions: (for insertions placed within the space of a year)
Space contract:1 page 2 pages 4 pages 8 pages5 % 10 % 15 % 20 %
Series contract:4 times 8 times 16 times �� times5 % 10 % 15 % 20 %
classified adverts (MM börse):2.70 € for a single line (46 mm wide and 1 mm high) plus translation costs, smallest size 46 x 50 mm or 94 x 25 mm. For box no. 10.– €
MM Yearbook November - Mechanical engineering (Format: on request)
Electronic advertising on: www.mm-online.hu(weekly electronic newsletter)
Prices are subject to change.
Size Standard formatsWidth x Height (mm)
With bleedWidth x Height (mm) Basic price €
1/1 page 190 x 277 220 x �07 �,020.–
1/2 page 100 x 277190 x 1�5
120 x �07220 x 155
1,7�0.–
1/� page 190 x 8070 x 277
220 x 11085 x 297
1,150.–
1/4 page 190 x 6590 x 1�540 x 277
220 x 80110 x 16060 x �07
980.–
1/8 page 90 x 6540 x 1�5
190 x �0
110 x 8560 x 160
220 x 50
570.–
14 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 15
MM Müszaki Magazin Publication Programme 2010
Geographical distribution:
Budapest �8 %
Pest, Komarom, Esztergom 17 %
Nograd, Heves, Borsod-Abauj-Zemplen 8 %
Szabolcs-Szatmar-Bereg, Hadju-Bihar 6 %
Jasz-Nagykun-Szolnok, Bekes 5 %
Bacs-Kiskun, Csongrad 8 %
Tolna, Somogy, Baranya 5 %
Fejer, Vesprem, Zala 8 %
Györ-Moson-Sopran, Vas 5 %
issue Publication Date
booking Deadline topics Fairs and Exhibitions
1/2 1 February
20 January
International frade fairs overviewMechanical engineering industry
3 8 March
24 February
Automation and automatingIndustrial robots and manipulatorsMeasurement and control
Magyar Regula, 2�-26 March, Budapest (International exhibition for automation, regulation and laboratory techniques)
4 5 April
24 March
Building IndustryBuilding engineeringHeatingVentilation, air condition technologyGreen energy technologies Lighting technology
construma/hungarotherm, 14-18 April, Budapest (International exhibition for building materials, construction equipment, building engineering and joining technology)Eneo/Elecrolight, 14-18 April, Budapest (International exhibition for green energy technologies and lighting technology, building electricity and intelligent buildings)
5 3 May
21 April
Mechanical engineering industryMaintenanceSurface treatmentFinancingPlastics processingPneumatics and hydraulicsPumps and fittingsElectronicsElectrical technologyRenewable energiesEco-technologies
industria, 4-7 May, Budapest (International trade fair for mechanical engineering, machine tools, welding and cutting))Electrosalon, 4-7 May, Budapest (International trade fair for electronics, electrical technology and automation)chemexpo, 4-7 May, Budapest (International chemical and plastic industry exhibition) Securex, 4-7 May, Budapest (International exhibition of labour safety, fire protection and security)Ökotech, 4-7 May, Budapest (International exhibition for environmental engineering)
6 28 June
16 June
Quality control and standards (TQM)Certificates
7/8 9 August
28 July
CAD/CAM systemsLaser technologyIndustrial robots and manipulators
9 6 September
25 August
Supply industrySubcontractingWood processing industry
Ligno Novum – Wood-tech, 22-25 September, Budapest (wood industry and forestry exhibition)
10 11 october
29 September
Industrial electonicsDrive engineeringMechanical engineering industry
16th Meeting on Distributed control Systems, Oktober 2010, Miskolc (International symposium for Process Control Systems and Industrial Communication Systems)
11 8 November
27 october
Logistics Transport and materials handling Packaging Mechanical engineering industry
MLbkt, November 2010(International conference for logistics, purchasing and supply chain management)
MM Year book
22 November
10 November
Mechanical engineering industryPlastics processingPneumatics and hydraulicsPumps and fittingsLogisticsIndustrial robots and manipulatorsAutomationMeasurement and control
12 6 December
24 November
Chemical industryPlastics industryOils and lubricants
14 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 15
Ukraine
MM Money & technologies
characteristics:Ukrainian Industrial magazine MM Money and technology is a title which pro-vides middle and top managers of industrial enterprises since 1999 with vital information on modern equipment, technologies and solutions, deployment of which increases production effectiveness, reduces power consumption and supports high quality products.Editorial materials are to guide the CTO, design managers, power engineers as well as the relevant department and service division leaders at the market of production equipment, industrial automation means, electrotechnology, infor-mation management systems and communications.
circulation: 10,000 copies
Frequency: 10 times a year
Place of publication: Kiev, UkrainePublisher: SoftPress Ltd.
General managers/owners of companies/enterprises 18%
Department leaders 62%
Engineers 15%
Other 5%
Administrative estates, branch committees, ministries 6%
State industrial enterprises (large, middle) 17%
Industrial companies of other forms of property (large, middle) 52%
Financial-economic institutions 21%
Juridical and advocatory companies 2%
Consulting companies 2%
Distribution Analysis by industrial branches:
Rate card no. 011, valid from 01/01/2010
Scope: Industry
Size of magazine: 210 x 297 mm (Width x Height), DIN A 4
type Area: 180 mm x 266 mm, � columns
Printing material, printing, binding:Digital printing material (please see on page �), offset printing, perfect binding
Advertising fractional sizes and rates: (1c=4c)
Size Width x Height (mm) Basic price €
1/1 page 180 x 266 �,�00.–
�/4 page 1�9 x 266180 x 199
2,750.–
2/� page 122 x 266180 x 175
2,550.–
1/2 page 88 x 266180 x 1�1
2,150.–
1/� page 58 x 266180 x 86
1,650.–
1/4 page 45 x 26688 x 1�1
180 x 64
1,485.–
1/8 page 4� x 1�188 x 64
180 x �0
920.–
Size Width x Height (mm) €
Inside front cover 210 x 297 4,200.–
Inside back cover 210 x 297 4,000.–
Back cover 210 x 297 5,000.–
2/1 page 420 x 297 5,610.–
Extra charge for special positions: 20%
Reductions: (for insertions placed within the space of a year)
Space contract:� pages 5 pages 9 pages 12 pages5 % 10 % 12 % 15 %
orders running longer than one year: Please enquire about terms
bound inserts and loose inserts: on request
classified adverts (MM börse):�.10 € for a single line (58 mm wide, 1 mm high) plus translation costs, smallest size 58 mm x 50 mm. 10.– € charge for box no.
Electronic advertising on: www.mmdt.com.ua(e.g. Banner) on request
Prices are subject to change.
colour charges: (none up to four colours) according to the European colour pattern
Extra charges for special positions and special sizes: (1c=4c)
16 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 17
MM Money & technologies Publication Programme 2010
issueNo.
Publication Date
booking Deadline
Printing Material Main topics
1/2 15 February
26 December
2009
15 January
Cover Story: Power Saving
3 15 March
26 January
1 February
Cover Story: industrial Automation
4 15 April
26 February
1 March
Cover Story: Power Engineering Electric EquipmentElectronics
5 10 May
26 March
1 April
Cover Story: Electrotechnology in mechanical engineering
6 2 June
26 April
1 May
Cover Story: Power Engineering Energy SavingEcology
7/8 25 August
26 May
1 June
Cover Story: industrial power supply
9 20 September
26 July
1 August
Cover Story: industrial Automation
10 20 october
26 August
1 September
Cover Story: Resource-saving technologies
11 20 November
26 September
1 october
Cover Story: industrial Automation
12 10 December
26 october
1 November
Cover Story: innovative Solutions 2010 + catalogue (Yellow Pages) of the enterprises working in the field of power engineeringelectronics electric equipment
16 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 17
MM Makina Magazin
turkey
characteristics:MM Makina Magazin is the polytechnical magazine for the Turkish industry. Editorial themes are specially orientated to the information requirements of managers and engineers in industry, trade and the service sector.
MM Makina Magazin in Turkish language is published and distributed by Dünya Super Veb Ofset A.S., Istanbul in cooperation with Vogel Business Media, MM Industrial Magazines, Würzburg.
circulation: 10,000 copies
Frequency: 12 times a year
Place of publication: Istanbul/TR
Publisher: Dünya Super Veb. Ofset A.S.
Rate card no. 016, valid from 01/01/2010
Scope: Industry
Size of magazine: 210 x 297 mm (Width x Height), DIN A 4
type Area: 190 mm x 270 mm, 4 columns each 46 mm wide
Printing material, printing, binding:Digital printing material (please see on page �), offset printing, perfect binding
Advertising fractional sizes and rates: (1c=4c)
Distribution according to company size:
In this analysis company size refers to the number of employees in the business that buy MM Makina Magazin. 58 % of these sales are made to companies employing a staff between 25 and 99.
1 - 9 employees 2 % 10 - 24 employees 16 % 25 - 49 employees �2 % 50 - 99 employees 25 % 100 - 249 employees 7 % 250 - 499 employees 8 % 500 - 999 employees 7 %1000 and more employees � %
total 100 %
colour charges: (none up to full colour), according to the European colour pattern
Extra charge for special positions:Back cover 25 %Inside front and back cover 25 %Other Positions 10 %
Extra charges for special sizes: Consecutive pages recto/verso, and double pages, up to 4 colours,(according to the European colour pattern):
consecutive pages recto/verso:2 pages 4,170.– €4 pages 7,017.– €
Double page spread: 5,560.– €
Junior page: (Size 1�6 x 190 mm) 1,790.– €
bleed charges: for all sizes, also for single-side bleed only 278.– €
Reductions: (for insertions placed within the space of a year)
Space contract:1 page 2 pages 4 pages 8 pages5 % 10 % 15 % 20 %
Series contract:4 times 8 times 16 times �� times5 % 10 % 15 % 20 %
orders running longer than one year: Please enquire about terms
classified adverts (MM börse):2.70 € for a single line (46 mm wide and 1 mm high) plus translation costs, smallest size 46 x 50 mm or 94 x 25 mm. For box no. 10.– €
Electronic advertising on: www.makinamagazin.com(e.g. Banner) on request
Prices are subject to change.
Size Width x Height (mm) Columns Basic price €
1/1 page 190 x 270 4 2,780.–
1/2 page 94 x 270190 x 1�4
24
1,5�0.–
1/� page 190 x 8862 x 270
41
1,020.–
1/4 page 190 x 6694 x 1�446 x 270
421
8�5.–
1/8 page 94 x 6646 x 1�4
190 x �2
214
460.–
Distribution according to sectors of industry:
Metalworking Industry (except for automotive) 41 % Automotive Industry 11 % Electric & Electronics Industry 8 %Packaging 5 %Chemical Industry 6 %Automation, Software 6 %Universities, Chambers of Industry and Commerce 5 %Mineral Oil and Rubber Processing 4 %Construction Facilities, Installation � %Mining, Quarrying, Ceramics � %Foodstuffs, Beverages, Tobacco � %Textile and Leather Industry, Apparel � %Other Branches 2 %
total 100 %
18 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 19
MM Makina Magazin
2 %Industrial Chamber Executives
Distribution according to professions:
24 %Owners and Top Management
� %Universities, Educational Tutors, Research4 %
Public Managers
2 %Others
28 % Engineers
21 %Middle Management
16 %Technical Department Heads
Distribution according to cities:74 % or more than half of the circulation ofMM Makina Magazin is distributed to the eight main cities in Turkey, in terms of population, size and industrial importance. 96 % of the total sales and the distribution respectively are made within Turkey.
Istanbul �2 %Izmir 10 %Bursa 9 %Ankara 7 %Kocaeli 5 %Konya 4 %Gaziantep 4 %Adana � %Denizli 2 %Kayseri 2 %Tekirdac 2 %Eskisehir 1 %Other cities 15 % Germany 4 %total 100 %
79 % of MM Makina Magazine’s circulation is read by decision makers in Turkish industry. 46 % of which have a final say.
Publication Programme 2010
issue No.
Publication Date
booking Deadline Main topics Fairs and Exhibitions
125
December2009
15December
2009
Subcontracting, Surface treatment, Metal Working, Welding
Subconist & EF, Industrial Subcontracting Exhibition Fair, 21-24 January 2010, Istanbul
2 25January
15January
Assembling, Welding and Cutting Technologies, Metal Working Technologies, Surface Treatments,Materials Handling
WiN 2010, World of industry Part i, Machinery, Welding, Surface Treatment and Materials Handling, 4-7 February 2010, Istanbul
3 24February
15February
Automation,Electrical and Electronic Systems,Measurement and Control
WiN 2010, World of industry, Part ii, Automation, Electrotech and Hydraulic & Pneumatic, 25-28 February 2010, Istanbul LAbtEk, Laboratory Technology and Equipment Fair, 5-8 March 2010, Istanbul
4 25March
15March
Metal Working, PackagingAutomation and Software
kayseri industry & Eletex, 8-11 April 2010, Kayseri
5 25April
15April
Dies, Moulding, Automation, Pneumatic and Hydraulic, Metalworking Technologies
Moulding Eurasia, 6-9 May 2010, Bursa
6 25May
15May
Metal Working Technologies ÇUtEk, Production Technologies Fair, 2-6 June 2010, Adana
7 25June
15June
Materials Handling Material handling Summit, 12 July 2010, Istanbul
8 25July
15July
Metal Working Technologies, Factory Automation
izmir, International Trade Fair 27 August - 5 September 2010, Izmir
9 25August
15August
Packaging, Automation, Processing Systems for Food Production
iPAck, International Packaging and Food Processing Systems Exhibition, 2�-26 September 2010, Istanbul
10 25September
15September
Metal Working Technologies, Factory Automation
tAtEF 2010, Metalworking Technologies Exhibition, 12-17 October 2010, Istanbul
11 25october
15october
Foundry Technologies,Surface TreatmentMetal Working Technologies
ANkiRoS 2010, 10th International Iron-Steel & Foundry Technology, Machinery and Products Trade Fair ANNoFER 2010, 9th International Non-Ferrous Metals Technology, Machinery and Products Trade Fair, 11-14 November 2010, Istanbul bURSA, METAL PROCESSING TECHNOLOGIES FAIR, �-7 November 2010, Bursa
12 25 November
15 November
Automation,Pneumatic and Hydraulic
hydraulic and Pneumatic congress, Istanbul
18 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 19
china
MM Xiandai zhizao
Scope: Industry
Size of magazine: 210 x 297 mm (Width x Height), DIN A 4
type Area: 190 mm x 270 mm, 4 columns each 46 mm wide
Printing material, printing, binding:Digital printing material (please see on page �), offset printing, perfect binding
Advertising fractional sizes and rates:
Rate card no. 016, valid from 01/01/2010
characteristics:MM Xiandai zhizao editorial concept is a mixture of technical and management. All the topics are carefully selected by professional editors and experts to guide the Chinese industry market. With highest acceptance and exceptional confidence shown by readers, it wins the heart of most of the advertising clients.
About the advertising market share, MM Xiandai zhizao takes the No.1 position in the manufacturing media, as sources from HUICONG International Information.
MM Xiandai zhizao provides plant-based solution for China factories. Special focus on following some industries.
Frequency: 52 times a year
Printed circulation: 25,000 copies
Distributed circulation: 24,938 copies
Place of publication: Beijing/China
Publisher: Beijing Jigong Vogel Media Advertising Co., Ltd.
target Group by industry:
OEM (Original equipment manufacturer) 25%Automotive industry 10%Metal working 20%Electronics and electrical products 10%Appliance 12%General machinery 16%R&D Centre & Institute 5%Trade 2%
Recipients:
General Manager 60%R&D Manager 16%Production Manager 11%Purchase Manager 8%Others 5%
Extra charge for special positions:Back cover : �5 % Inside front and back cover: �5 % Other Positions: 15 %
Extra charges for special sizes:Consecutive pages recto/verso, and double pages, up to 4 colours,(according to the European colour pattern):
consecutive pages recto/verso:2 pages 6,525.– €4 pages 10,875.– €
Double page spread:up to 4c 7,540.– €
Junior page: b/w (1�6 x 190 mm) 2,720.– € (Colour charges as 1/2 page)
bleed charges (not subject to discounts): For all sizes 4�5.– €, also for single-side bleed only.
bound inserts and loose inserts: on request
Reductions: (for insertions placed within the space of a year)
Space contract:1 page 2 pages 4 pages 8 pages5 % 10 % 15 % 20 %
Series contract:4 times 8 times 16 times �� times5 % 10 % 15 % 20 %
orders running longer than one year: Please enquire about terms
classified adverts (MM börse):€ 4.00 for a single line (46 mm wide and 1 mm high) plus translation costs, smallest size 46 x 50 mm or 94 x 25 mm. € 10.– charge for box no.
Electronic advertising on: www.mm-chinese.com(e.g. Banner) on request
Prices are subject to change.
colour charges: For each additional colour according to the European colour pattern (not subject to discount):
Size Width x Height (mm) Columns Basic price €
1/1 page 190 x 270 4 4,�50.–
1/2 page 94 x 270190 x 1�4
24
2,175.–
1/� page 190 x 8862 x 270
41
1,450.–
1/4 page 190 x 6694 x 1�446 x 270
421
1,088.–
1/8 page 94 x 6646 x 1�4
190 x �2
214
545.–
page 2nd colour € �rd colour € 4th colour € full coloured €1/1 200.– 200.– 180.– 580.–1/2 150.– 150.– 1�5.– 4�5.–1/� 150.– 150.– 105.– 405.–1/4 100.– 100.– 90.– 290.–1/8 100.– 100.– 90.– 290.–
Pt Plasticstechnology china*The specialist for the plastics processingindustry in China.
Frequency: 12 times per year (+ 3 Special issues) * Schedule on page 25
20 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 21
MM Xiandai zhizao Publication Programme 2010
Issues No. 1�-52 on next pages
issuePublication Date
Advertising Deadline
Main topicsFeature
Supplement trade Fairs
14 January 21 December
2009
top 10 News in 2009:Innovative & Energysaving Products of Automationcapital Spending 2010: Survey & ForecastDemand Analysis of Specific Industry
225 January 11 January
capital Spengding 2010:Survey & ForecastAutomatic Processing, Process OptimizationReduce Stand-by Time, Multi-tasking MachiningMachining Center, Cutting Tool, CNCCutting Fluid
Wind Power
Machine Tool Industry of Post-crisis Era
SiMM 2010, 28-�1 March, Shenzhen
31 February 17 January
2009 Automation Industry Event SummaryPlant Energy Management, Energy PlantRecalling the 2009 Automation SummitRecalling the 2009 CIIFThe Developong 2010 Automation Market Trends
New EnergyPackage
chiFA 2010, 8-11 March, GuangzhouMv china 2010, �1 March - 2 April, Shanghai
422 February 31 January
Optical-mechanical integrationMotion Control, Servo MotorControl Unit, Micro-motor
PackagePharmacy
PtG 2010, 8-11 March, Guangzhou
51 March 12 February
Order Picking, Intelligent Electric HoistDynamic Warehouse System, Vacuum HandlingReach Trucks, Logistics Management, DistributionPrinter, AS/RS, Software, Industry Door, ERPCranes, Robotics, Automatic IdentificationWMS, System Integration
Food Beverage
LogiMAt, 2-4 March, D-StuttgartSino-Pack 2010, 9-11 March, Guangzhou
68 March 21 February
Machine Vision, Motion Controller, Servo Motor PLC, MES, Sensor, Motion System, FlowmeterEmbedded System, IPC, Simulation SystemSCADA/HMI, Inverter, Soft Starter Fieldbus, Industrial Ethernet, DCSWireless Communication, cPCILow Voltage Electrical Apparatures
ElectronicsPetrochemical
Electronica china, 16-18 March, ShanghaiiEE, 9-11 April, ShenzhenMv china 2010, �1 March - 2 April, ShanghaiciPPE 2010, 22-24 March, BeijingchiFA 2010, 8-11 March, Guangzhou
712 March 26 February
Auxiliary Equipment and ToolsWelding Materials, etc.Laser Welding/Cutting Equipment andProcesses
Northeast china, 14th Int. Welding Technique Equipment Exhibition, 18-21 March, Shenyanginterpipe 2010, International Pipeline Exhibition, �1 March - 2 April, LangfangJAPAN WELDiNG ShoW 2010, 21-24 April, Tokyo4th Jiangsu international Ship industry Summit Shipbuilding industry Exhibition, 22-24 April, Nanjing
815 March 1 March
Intelligent Machining, Machining CenterCutting Tool, MQL, CNC, Clamp, Cutting FluidRobot, Stock, Linear Motor EncoderMotion Control Solution
�G ccMt 2010, 12-16 April, Nanjing
922 March 8 March
Rapid Prototyping, HSM, CMMsSurface Treatment, Mold ComponentCAD/CAM/CAE, Hot RunnerElectrode Design & ManufactureReverse Engineering
Electronics SiMM 2010, 28-�1 March, ShenzhenccMt 2010, 12-16 April, Nanjing
1029 March 14 March
Motor/Ballscrews/GuidewayServo System, Mechatronics CNC FeaturesCAD/CAM/CAE
Machine Tool/Metallurgy
ccMt 2010, 12-16 April, Nanjinghannover Fair MDA, 20-24 April, D-Hanoverchinaplas 2010, 19-22 April, ShanghaiMc 2010, 11-14 May, Beijing
115 April 21 March
PLC, Industrial Ethernet, FieldbusIndustrial Router Switch, I/O, MES, ConnectorMotion Controller, Servo, Inverter High-Performance Motor Wireless Communication, CPCI, RTU, I/O, HMIAutomation Software
Plastic MachineryElevator
chinaplas 2010, 19-22 April, ShanghaiWEE Expo, 21-24 April, LangfangccMt 2010, 12-16 April, NanjingMc 2010, 11-14 May, Beijing
1212 April 26 March
Machining Center, Cutting ToolTool Management, FMSIntelligent Machining, SpindleLoader and Unloader, Robot, Stock Ball Screw, Linear Motor
Railway ccMt 2010, 12-16 April, NanjingSiMtoS, 1�-18 April, Seoul
20 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 21
issuePublication Date
Advertising Deadline
Main topicsFeature
Supplement trade Fairs
1319 April 5. Apri
Mold Repair, Cutting ToolsHot Runner, CNC, Rapid PrototypingMachining Center, EDMElectrode Design & ManufactureReverse Engineering
Rubber chinaplas 2010, 19-22 April, ShanghaiDie&Mould china 2010, 11-15 May, Shanghai
1426 April 12. Apri
Automation WarehouseIntelligent Material HandlingAutomatic IdentificationElectric Forklift, WMS, WCS, SensorLifting Platform, Sorting, Conveyor Packaging, AGV, Cranes, Stacker, WarehouseMachine Vision, ERP, High Rack, Scanner
�G NA 2010, 26-29 April, USAtransport Logistic china, 8-10 June, Shanghai
153 May 19. Apri
Precision of Mold Making HSM, HEM, Cutting Tools Collaborative Design & ManufacturingSoftware, EDM, CMMs
Automobile Die&Mould china 2010, 11-15 May, ShanghaiciMES 2010, 14-18 June, Beijing
167 May 23. Apri
Air Purification, Digital Welding/Cutting:Equipments and ProcessesWelding/Cutting RobotsWelding Materials
15th bEiJiNG ESSEN WELDiNG & cUttiNG FAiR, 27-�0 May, Beijing
1710 May 20. Apri
High-Speed Machining5-Axis Machining CenterHigh-precision Machining of Bigger MouldsEDM, CAM, Measuring Equipment
Medical Instrument Die&Mould china 2010, 11-15 May, Shanghai
1814 May 29 April
High-efficiency Machining, Dynamical DriveManufacture Automation, Lean Production, RFID Forklift, Cranes CNC, Machining Center, Cutting Tools CAD, Cutting Fluid, SensorControlling System, Low-voltage ApparaturesEthernet, Instrument, Bearing, Reducer Motor, Pneumatic Component
Railway Transport Metro china 2010, 19-21 May, Shanghai
1917 May 25 April
Fieldbus, Industrial EthernetIndustrial Router, Switch, InveterServo Motor, Servo CotrollerSCADA/HMI, PLC, DCS, RelayBreaker, Button, I/O, Connector
MetallurgyAutomobile
iAc 2010, 1-� June, ShanghaiMc 2010, 11-14 May, Beijing
2024 May 10 May
Machining Center, Cutting Tool, CNC, ClampCutting Fluid, Grinding Machine, ERPLoader and Unloader, Robot, StockBall Screw, Linear Motor
General Machine ciMES 2010, 14-18 June, Beijing
2131 May 16 May
Practical Energy-saving TechnologiesElectro-hydraulic Gas IntegrationHydraulic/Sealing TechnologyElectrical Transmission
Wind PowerRailway Transport
WPA 2010, 2�-25 June, BeijingciMES 2010, 14-18 June, Beijing
221 June 16 May
Industrial Ethernet, FieldbusIndustrial Router Switch, I/OWireless Communication, CPCI, RTU, HMI Automation Software
Machine ToolTextile
FA/PA 2010, Juni 2010, BeijingciMES 2010, 14-18 June, BeijingitMA ASiA+citME 2010, 22-26 June, Shanghai
237 June 24 May
Machining Center, Cutting Tool, CNCLaser Processing Equipment, Clamp, LatheGrinding Machine, Milling Machine, EDMCMM, Coating, Cutter Aligner, CAD/CAM/PLM Spindle, Robot, Stock, ERP, Ball Screw
Automobile(Hybrid)
ciMES 2010, 14-18 June, Beijing
2414 June 1 June
Process Optimization, High-efficiency Machining Machining Center, Cutting Tool, CNC Laser Processing Equipment, Grinding Machine CMM, Coating, Cutter Aligner, Robot, Linear Motor
Aviation & Aerospace ciMES 2010, 14-18 June, BeijingWPA 2010, 2�-25 June, Beijing
2521 June 5 June
MES, DCS, SCADA/HMI, PLC, InverterMachine Vision, Soft Starter, IPC, FieldbusIndustrial Ethernet, Wireless CommunicationSensor, cPCI, Energy ManagementSystems, Connector
PackageWind Energy
ProPak china, 15-17 July, ShanghaiWPA 2010, 2�-25 June, Beijing
22 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 2�
issuePublication Date
Advertising Deadline
Main topicsFeature
Supplement trade Fairs
2628 June 14 June
Warehouse Management, Sorting, Cranes,Electric Forklift, AGV, WMS,Visualization Management, Data Collection,Pallet Trucks, Conveyor, Robotics,System Integration, Industry Door, RFID, Printer, Safety Equipment, Rack,Printer, AS/RS
Railway Transport EAStPo 2010, 15-18 July, Shanghai
275 July 21 June
Machining Center, Manufacture Big MoldERP, Design Software, CMMsCutting Tools, EDM
Energy Industry EAStPo 2010, 15-18 July, Shanghai
2812 July 28 June
top 10 Person in 2010Multi-tasking Machining, HMC, Waterjet, Machining Center,Cutting Tool, Measuring Equipment
Ship-building EAStPo 2010, 15-18 July, Shanghai
2919 July 4 July
Photoelectric Switch, Motion Controller,Servo Motor, Servo Controller, Sensor,Inverter, PLC, SCADA/HMI,Cabinets Terminals, I/O, Fieldbus, Breaker,Contactor
Environmental Protection Port
12th international industrial Automation & instruments Exhibition, August 2010, Qingdao12th china international Plastics & Rubber industry Exhibition, August 2010, Qingdao12th Qingdao international Machine tools & Moulds Exhibition, August 2010, Qingdao
3026 July 12 July
Voice Picking, AS/RS, Data Collection,Warehouse Management, Conveyor, Hybrid Forklift, Cranes, Robotics, Picking,Weighing, Packaging, Inspection, Rack, DPS, RFID, WMS, Transport, Logistics Center
Pharmaceutical Scan china, August 2010, Guangzhou
312 August 19 July
Welding/Cutting Robots,Laser Welding/Cutting Equipment,Welding Materials, Monitoring and Testing Instruments
24th chiNA WELDiNG EXhibitioN
329 August. 25 July
Inverter, Soft Starter, Servo Motor,Servo Controller, Instrument, SCADA/HMI,PLC, DCS, Relay, Breaker, Button, I/O, Connector
Heavy MachineryMining Machinery
ciEME, 1-5 September, Shenyang
3316 August 2 August
Machining Center, Cutting Tool,Cutting Tool Management, CNC, Laser ProcessingEquipment, Lathe, Grinding Machine,Milling Machine, Loader and Unloader,Robot, CAD/CAM/PLM, Stock
Metallurgy Equipment ciEME, 1-5 September, ShenyangAsiamold 2010, September 2010, GuangzhouMEDtEc, September 2010, Shanghai
3423 August 8 August
Hydraulic Control Technology, MechatronicsMotion Control, Servo TechnologyGear Case/Bearing lubrication
Wind PowerAviation & Aerospace
china Wind Power 2010, 14-16 October, Beijingbearing 2010, 21-24 September, Shanghai
3530 August 16 August
Mold Design Software, Reverse EngineeringHSM, Mold Materials, Rapid PrototypingCMMs, CAD/CAM/CAE
Consumer Goods AsiaMold 2010, September 2010, Guangzhou
366 September 22 August
SCADA/HMI, Electronic Measuring Instruments, Sensor, RFID, Industrial Power, Thermometer, Transmitter, Environmental Protection Equipment,Weighing Devices, Electrical Wire, PLC, MES, DCS
Paper PrintingPharmaceutical
MicoNEX, 6-9 September, Beijingchina Wind Power 2010, 14-16 October, Beijing
3710 September 26 August
Supply Chain Management, RFID, Efficiency Handling, Robotics, Lean Production, Electric Hoist, Industry Door, Rack, Support Arm Stacker, WMS, System Integration, ERP, Distribution, Warehouse, Cranes, Forklift Attachment, Pallet, Coding, Picking,Lifting Platform, Cold Chain
Wind PowerCeMAT ASIA Preview
china Wind Power 2010, 14-16 October, BeijingceMAt ASiA, 25-28 October, Shanghai
3813 September 30 August
Wind Turbine, Big Parts Machining,Multi-tasking Machining, Automatic Control and MonitoringPrincipal Axis, Bearing, Encoder
Wind Power china Wind Power 2010, 14-16 October, Beijing
3920 September 6 September
HMC, Cutting Tool,Waterjet, CNC, Laser Processing Equipment, Clamp, Cutting Fluid, Loader and Unloader,Robot, CAD/CAM/PLM, Stock, Spindle, ERP,Ball Screw, Linear Motor
Construction Equipment
china Wind Power 2010, 14-16 October, Beijing
22 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 2�
MM Xiandai zhizao Publication Programme 2010
issuePublication Date
Advertising Deadline
Main topicsFeature
Supplement trade Fairs
4027 September 12 September
High-Precision Machining MotorPneumatic Component, Reducer, BearingAir Compressor, DCS
Pharmaceutical china-pharm, 27-�0 October, Shanghai
414 october 12 September
Wireless, Low Voltage Electrical Apparatures, PAC PLC, DCS, IPC, MES, Industrial CommunicationIndustrial Ethernet, Fieldbus, Simulation SystemSensor, Machine Vision, Connector, SCADA/HMI I/O, RTU, Industrial Router Switch
AutomobilePower
ciiF 2010, 2-6 November, ShanghaiiAS 2010, 2-6 November, ShanghaiEP china 2010, 19-21 October 2010, Beijing
4211 october 21 September
Hybrid Forklift, Logistics PlanningCounterbalance Trucks, Scanner, RoboticsAutomation Material Handling, ERP, BarcodeSystem Integration, Machine Vision, RFIDPrinter, Cranes, AGV, Industrial Clean EquipmentScanner, Sensor, Forklift Attachment
Aviation & Aerospace ceMAt ASiA, 25-28 October, Shanghaichina international Aviation & Aerospace Exhibition, 16-21 November, Zhuhai
4318 october 30 September
Bearing, Gear Case, ReducerHydraulic Component, Pneumatic ComponentSealing, Tanks, Pump, Ballscrews, GuidewayClutch, Coupling, Motor
Electronic/Medical Tool Ptc ASiA, 25-28 October, ShanghaiciiF 2010, 2-6 November, Shanghai
4425 october 11 october
Machining Center, Cutting ToolLaser Processing Equipment, CNCMetal Forming Machine Tool, ClampMeasuring Equipment, Cutting FluidGrinding Machine, Coating, EDM
Aviation & Aerospace
IMTS Review
ciiF 2010, 2-6 November, ShanghaiDMP 2010, 18-21 November, Dongguan
451 November 10 october
Embedded System, IPC Low Voltage Electrical Apparatures PAC, PLC, DCS, MES, Industrial Communication Industrial Ethernet, Fieldbus, Simulation System Sensor, Machine Vision, Connector SCADA/HMI, I/O, RTU, Industrial Router Switch
New EnergyRailway Transport
ciiF 2010, 2-6 November, ShanghaiiAS 2010, 2-6 November, Shanghai
468 November 25 october
EDM, Electrode Design & ManufactureCMMs, Cutting Tools CoatingMachining Center, Hot Runner Design Mold Materials, Surface Treatment
Medical & Pharmacy DMP 2010, 18-21 November, DongguanEuroMold, 1-4 December, D-Frankfurt
4710 November 26 october
Manufacture Intelligence Dynamical Drive, Manufacture AutomationTraking & Trace, Cranes, Hoist, ForkliftMachining Center, Cutting Fluid, Cutting Tools AIDC, Software, SCADA/HMI, RoboticsSensor, Encoder, I/O, Reducer, Bearing Motor, Composite Material
Aviation & Aerospace china international Aviation & Aerospace Exhibition, 16-21 November, Zhuhai
4815 November 1 November
Hydraulic Component, Reducer, BearingLubricator, BallscrewsGuideway, Clutch, Gear
Construction MachineryAutomobile
bauma china, 2�-26 November, Shanghai
4922 November 8 November
5-Axis Machining Center Done-in-one Turn-millingWaterjet, Cutting Tool, CNC Laser Processing EquipmentCAD/CAM/PLM, Stock
Nuclear Power Equipment
506 December 22 November
Digital Welding/Cutting Equipments and ProcessesMonitoring and Testing Instruments
5113 December 1 December
Machining Center, Cutting Tool, CNCMQL, Clamp, Spindle, Grinding MachineHigh-speed Milling MachineMotion Control Solution
Mold-making
JIMTOF Review
5227 December 13 December
Machining Center, Cutting ToolGrinding Machine, Control SystemSensor, Communication, Fluid TransmissionElectric Drive, Mechanical TransmissionMaterial Handling, AIDC, RoboticsSystem Integration, EDMMeasuring Equipment, Hot Runner
24 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 25
Publication Programme 2010Pt Plasticstechnology china
topics in each issue:
Processing solutions, materials and applications, mold making, market and technology trends, supplier recommendations, new products
issueNo.
Publication Date
Advertising Deadline industry Focus Special technology Supplement Relevant Exhibition
1 15 Jan. 5 Jan. Film & Sheet Welding Automation
2 25 Feb. 10 Feb. Hollow Containers Injection Moulding Extrusion Technology
3 18 March 8 March Profile & Siding Auxiliary Processing Chinaplas Preview chinaplas 2010, 19-22 April, Shanghai
Special i 8 April
chinaplas 2010 – bUYERS‘ GUiDE (bilingual chinese/English) Format: �2K (140mm×210mm), 4 Color, 20,000 copies for bonus distribution at Chinaplas Show.
chinaplas 2010, 19-22 April, Shanghai
4 10 April 2 April Electric & Electronics Measuring & Control Chinaplas 2010Suppliers Album
chinaplas 2010, 19-22 April, Shanghai
5 15 May 5 May Pipe Reaction Injection Moulding
Composite &Process
PU china 2010, 26-28 May, Shenzhen
6 18 June 8 June Hollow Containers Automation Chinaplas Review
7 18 July 8 July Film & Sheet Hot Runner PU China Review
8 12 Aug. 2 Aug. Medical Parts Extrusion Technology InnovativeTechnology
MEDtEc, August/September 2010, Shanghai
9 10 Sept. 30 Aug. Composite & Application Auxiliary Processing JEC Asia ShowPreview
china composites Expo, 15-17 September 2010, Peking
Special ii 10 oct.
k 2010 – china Suppliers (English version) Format: �2K (140mm×210mm), 4 Color, 15,000 copies for bonus distribution at K 2010
–
10 12 oct. 2 oct. Profile & Siding Injection Moulding K Show Preview JEc Asia, Oktober 2010, Singapur
11 18 Nov. 8 Nov. Pipe Measuring & Control China Composites Expo. Review
k 2010, 27 October - � November, D-Dusseldorf
12 18 Dec. 8 Dec. Electric & Electronics Extrusion Technology K Show Review DMP 2010, 18-21 November, Dongguan
Special iii 20 Dec.
2010/2011 – Processing handbook & buyers‘ Guide (chinese version) Format: �2K (140mm×210mm), 4 Color, �0,000 copies for bonus distribution.
the specialist for the plastics processing industry in china.
24 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 25
MM the industrial Magazine thailand
thailand
characteristics:MM the industrial Magazine is a technical title from the range of international publications of MM MaschinenMarkt. MM thailand is the only technical magazine that covers topics related to the production industry in the growth market of Southeast Asia. The publication provides up-to-date information on worldwide trends and new products for metal and plastics processing, automation and control, production, electronics, IT as well as logistics.The technical articles are prepared and authored by experts from research and industry most of whom were professionally trained in Germany.
target group:Managers and decision makers from all sectors of the industry, as well as dealers, importers and suppliers.
circulation: 20,000 copies
Frequency: 12 times a yearPlace of publication: Bangkok, Thailand
Publisher: Green World Media (Thailand) Company Limited
Distribution analysis by company size:
1 - 49 employees 27 % 50 - 99 employees 24 % 100 - 499 employees �4 % 500 - 999 employees 8 %more than 999 employees 7 %
total 100 %
Editorial topics:
Air Compressor TechnologyAir Conditioning and VentilationAssemblyAutomation SystemsAutomotive IndustryCAD, CAM, CAP, CIMCastingControl SystemsDesign ComponentsDrive EngineeringElectrical EquipmentEnergyEnvironmental ProtectionFacility ManagementFluid PowerForgingFormingIdentification TechnologyImage ProcessingIndustrial ElectronicsIndustrial SafetyJoining and Fastening
Scope: IndustrySize of magazine: 210 x 297 mm (Width x Height), DIN A 4type Area: 190 mm x 270 mm, 4 columns each 46 mm widePrinting material, printing, binding:Digital printing material (please see on page �), offset printing, perfect binding
Advertising fractional sizes and rates: (1c=4c)
Rate card no. 006, valid from 01/01/2010
Laser SystemsLogisticsMachine ToolsMaintenance and ServicingMaterial Handling SystemsMaterialsMeasurement and TestingMetal-Cutting ProductionPackaging and StoragePlant and WorkshopPlasticsPower EngineeringProcess EngineeringProduction InstrumentationQuality ManagementRoboticsSensor SystemsSheet Metal WorkingSoftware and CommunicationSurface TreatmentToolsUsed MachineWelding and Cutting
classified adverts (MM börse): (1c=4c)
Size Width x Height (mm) Basic price €1/1 page 190 x 270 1,900.–1/2 page 94 x 270
190 x 1�41,000.–
1/� page 62 x 270190 x 88
700.–
Position/Size €Inside front cover (1/1 page) 2,700.–Back cover (1/1 page) �,100.–Inside back cover (1/1 page) 2,500.–Front cover - flip outside (2/1 page) 4,800.–Back cover - flip inside (2/1 page) �,480.–page � (1/1 page) 2,800.–page 4 (1/1 page) 2,400.–page 5 (1/1 page) 2,700.–page 6 (1/1 page) 2,�00.–page 7 (1/1 page) 2,500.–page 8 (1/1 page) 2,100.–page 9 (1/1 page) 2,400.–page 11 (1/1 page) 2,�00.–page 12 (1/1 page) 2,000.–page 1� - Editor page (1/� page) 1,000.–page 19 - Content (1/2 page) 1,400.–
Size Width x Height (mm)) Columns Basic price €1/16 page 46 x 6� 1 115.–1/8 page 94 x 6�
46 x 12821
2�0.–
�/16 page 142 x 6�46 x 19�
�1
�45.–
1/4 page 46 x 25894 x 128
190 x 6�
124
460.–
�/8 page 142 x 12894 x 19�
�1
690.–
1/2 page 190 x 12894 x 258
41
920.–
9/16 page 142 x 19� � 1,0�5.–�/4 page 190 x 19�
142 x 2584�
1,�80.–
1/1 page 190 x 258 4 1,840.–
Electronic advertising on: www.mmthailand.com (e.g. Banner) on request
Prices are subject to change.
Reductions: (for insertions placed within the space of a year)Space contract:2 pages � pages 4 pages 5 pages10 % 15 % 20 % 25 %
Series contract:6 times 12 times 18 times 24 times10 % 15 % 20 % 25 %
Special inserts:210 g/m2 paper (1/1 page) 2,800.–210 g/m2 paper - folding (4 pages) 4,000.–
Extra charge for special positions: (1c=4c)
26 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 27
Distribution by function:
Managing/technical directors 14 %Buyers 17 %Design engineers 4� %Production / maintenance 10 %Design engineering 11 %Other 5 %
total 100 %
MM the industrial Magazine thailand Publication Programme 2010
issue No. Publication Date
booking Deadline
Printing Material Main topics Fairs, Exhibitions
120 Jan. 16 Dec. 2009 21 Dec. 2009
Measuring and Testing, Tools, Fluidics, Machine Tools
222 Feb. 18 Jan. 22 Jan.
Automation, Control, Electrical Equipment, Facility Management
322 March 15 Feb. 19. Feb
Drive Engineering, Material Flow
420 April 16 March 19 March
Machine Tools, Robotics, Sheet Metal
520 May 12 April 20 April
Environmental Protection, Facility Management, Assembly, Processing of Plastics, Pumps, Valves, Fluidics
intermach 2010 – International Metalworking Automation and Industrial Machinery ExhibitionSUbcoN thailand 2010 – Thailand‘s Leading Industrial Subcontracting ShowAutomotive Engineering Asia 2010 – International Automotive Design, Manufacturing and Engineering Exhibition
621 June 17 May 21 May
Electrical Equipment / Industrial Electronics, Machine Tools, Surface Treatment, Packaging, Automotive, Fluid Power, Energy
ProPak Asia 2010 – 18th International Processing, Filling, Packaging Technology and Conference for the Asian RegionPharmatech Asia 2010 – 16th International Pharmaceutical & Cosmetics Packaging & Processing Technology ExhibitionPlastech Asia 2010 – 6th International PET & Plastics Packaging Technology & Materials Exhibitioncantech Asia 2010 – 15th International Canmaking & Canning Technology Exhibitionkthe E5 Engineering Series 2010 – Indo-China‘s Energy EventinterPlas thailand 2010 – 18th International Plastic and Rubber Technology Trade Exhibition and ConferenceinterMold thailand 2010 – Thailand’s Only Machinery and Technology Trade Exhibition & Conference for Mold & Die Manufacturing - 18th EditionAutomotive Manufacturing 2010 – ASEAN‘s Only Machinery Expo for Automotive Parts Manufacturing – 7th EditionAutomotive Electronics 2010 – ASEAN’s Only Machinery Expo for Automotive Electronics Parts and Components ManufacturingAssembly technology 2010 – 10th International Integrated Manufacturing Technology ExhibitionEntech Pollutec Asia 2010 – International Exhibition of Environmental Protection and Pollution Control TechnologyPumps & valves Asia 2010 – Asia‘s Only Specialised Pumps, Valves and Fitting Hardware Trade ExhibitionRenewable Energy thailand 2010 – Thailand International Renewable Energy Conference and Exhibition
720 July 15 June 21 June
Machining, Laser Systems
820 Aug. 16 July 21 July
Air Conditioning and Ventilation
920 Sept. 16 Aug. 20 Aug.
Design Components, Machine Tools, Welding and Cutting
1020 oct. 15 Sept. 20 Sept.
Machine Tools, Sheet Metal Working, Forming, Welding and Cutting
1122 Nov. 18 oct. 22 oct.
Machine Tools, Industrial Safety, Control Systems
MEtALEX 2010 – 24th International Machine Tools and Metalworking Machinery Trade Exhibition and Conference.Thailand’s Largest Machine Tools & Metalworking ExpositionSheet MEtALEX 2010 – International Sheet Metal Technology, Machinery Trade Exhibition & Conference
1220 Dec. 15 Nov. 20 Nov.
New Products
26 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 27
korea
MM korea
characteristics:MM korea is a professional magazine for the technical industry, with a focus on machine building and metal working as well as electrical engineering, vehicle construction and further related topics.
target group:Decision-makers from the Korean investment goods industry and trade as well as service providers. Decision-makers from all industrial sectors are addressed based on a specific dispatch key. MM korea is moreover a platform for German (European) companies that want to be active in the rapidly expanding East Asian markets.
circulation: 20,000 copies
Frequency: monthlyPlace of publication: Seoul/KoreaPublisher: ACROSS-DEXIOR CAPITAL CO., LTD
Rate card no. 002, valid from 01/01/2010
etc. 2 %
Machine building 38 %
Metal working 34 %
Electrical engineering
15 %
Vehicle construction 11 %
target groups:
Production 51,7 %
CEO 23,4 %
Research and Development
15,6 %
Construction 9,3 %
Distribution by industrial sectors:
Scope: Industry
Size of magazine: 210 x 297 mm (Width x Height), DIN A 4
type Area: 190 mm x 270 mm, 4 columns each 46 mm wide
Printing material, printing, binding:Digital printing material (please see on page �), offset printing, perfect binding
Advertising fractional sizes and rates: (1c=4c)
Size Width x Height (mm) Columns Basic price €
1/1 page 190 x 270 4 2,690.–
1/2 page 94 x 270190 x 1�4
24
1,710.–
1/� page 190 x 8862 x 270
41
1,280.–
1/4 page 190 x 6694 x 1�446 x 270
421
890.–
1/8 page 94 x 6646 x 1�4
190 x �2
214
480.–
colour charges: none up to full colour, according to the European colour pattern
Extra charge for special positions:
Back cover �5 %Inside front and back cover 25 %Other Positions 15 %
Reductions: (for insertions placed within the space of a year)
Space contract:1 page 2 pages 4 pages 8 pages5 % 10 % 15 % 20 %
Series contract:� times 6 times 9 times 12 times5 % 10 % 15 % 20 %
classified adverts (MM börse):�.00 € for a single line (46 mm wide and 1 mm high) plus translation costs, smallest size 46 x 50 mm or 94 x 25 mm. For box no. 10.– €
Electronic advertising on: www.mmkorea.kr(e.g. Banner) on request
Prices are subject to change.
28 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 29
Publication Programme 2010MM korea
28 Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea Switzerland (SMM)
Switzerland (MSM)
Austria Poland czech Republic
hungary Ukraine turkey china thailand korea 29
issue No.
Publication Date
Advertising Deadline
Advertising Deadline* Main topics trade Fairs
1 1 January
1 December
2009
1 December
2009
MaterialsForming, Automation Heating Ventilation and air conditioning
2 1 February
15 January
15 December
2009
Energy technology Transmissions Drives Welding and cutting Environmental engineering
Exposola, Trade fair for solar energy, �-5 February, Seoul (Coex)
3 2 March
15 February
15 January
Measurement and test Sensors, Digital factory, CAD, Simulation �D simulation �D visualization Pump systems
aimex 2010 (Industrial Automation, Instrumentation & Measurement Exhibition), �-6 March, Seoul (COEX) 20th korea international Plastics & Rubber Show, �1 March - � April (KINTEX)
4 1 April
15 March
15 February
Precision tools Casting and forging Metal-cutting manufacturing
Simtos 2010 (Seoul International Machine Tool Show), 1�-18 April (KINTEX)international Motor Show 2010, 29 April - 9 May, Busan (BEXCO)icat 2010 (International Clean Air Tech) 14-16.April Seoul (COEX)kPcA Show 2010 (International Electronic Circuit Show), 27-29 April, Seoul (COEX)
5 1 May
15 April
15 March
Materials Forming Automation Heating ventilation and air conditioning
koFAS 2010 (International Factory Automation System Show), 25-28 May, Changwon (CECO)
6 1 June
15 May
15 April
Energy technology Transmissions Drives Welding and cutting Environmental engineering
korea Pack 2010, 1-4 June, Seoul (KINTEX)
LED EXPo & oLED EXPo 2010, 22-25 June (KINTEX)
7 1 July
15 June
15 Mai
Measurement and test Sensors Digital factory, CAD �D simulation, �D visualization Pump systems
8 2 August
15 July
15 June
Precision tools Casting and forging Metal-cutting manufacturing
9 2 September
15.August
15 July
Materials Forming Automation Heating ventilation and air conditioning
Seoul international Electric Fair 2010, 7-9 September, Seoul (COEX)it Expo 2010, 8-11 September, Busan (BEXCO)
10 1 october
15 September
15 August
Energy technology Transmissions Drives Welding and cutting Environmental engineering
kiMEX 2010 (Korea International Machinery Expo 2010), 1�-16 October, Seoul (KINTEX)
11 1 November
15 october
15 September
Measurement and test Sensors Digital factory, CAD, Simulation �D simulation, �D visualization Pump systems
koaashow (Korea Autoparts & Auto-related Industries Show) 18-20 November (KINTEX)
12 1 December
15 November
15 october
Precision tools Casting and forging Metal-cutting manufacturing
* Advertising deadline for ads including corrections, translation and/layout changesÇ
MM MaschinenMarkt:The international industrial magazine
www.vogel.de
Total circulation:
6 million copies per year
You choose the channel, we provide the knowledgeUsers searching for qualified professional know-how will quickly and efficiently find the required information on our innovative media platforms. Vogel Business Media is a leading publisher of professional media and provides the network for people and the media. Print, online or event – many different ways of knowledge transfer are available, and you chose the approach that is most convenient and efficient for you – professional magazines, infor-mation services, online media, specialist books or our wide range of services and events. Get ready!
PRINT | ONLINE | EVENT | SERVICE
www.vogel.de
Europe: company Phone Fax E-mail
Austria Technik & Medien Verlagsges. mbH +43-1-876837913 +4�-1-8768�7915 [email protected]
czech Republic/Slovakia MM publishing s.r.o. (Ltd.) +420-2-67216423 +420-2-67216440 [email protected]
France DEF & COMMUNICATION +33-1-47307180 +��-1-47�00189 [email protected]
Germany Vogel Business Media +49-931-418-2686 +49-9�1-418-2022 [email protected]
Great britain/ireland VOGEL Europublishing UK Office +44-800-3101704 +44-800-�101705 [email protected]
hungary Motor-Presse Budapest Lapkiadó Kft. +36-1-577-2683 +�6-1-577-2690 [email protected]
italy Ferdinando Salaris +39-33-88285021 +�9-02��294887 [email protected]
Poland MM Magazyn Przemyslowy +48-32-3541005 +48-�2-�525720 [email protected]
Switzerland Vogel Business Media AG +41-44 722 77 78 +41-44 722 77 01 [email protected]
Netherlands/belgium/Lux S.I.P.A.S. +31-299-671303 +�1-299-671500 [email protected]
turkey DüNYA Super Veb Ofset A.S. +90-216-6811805 +90-216-680�971 [email protected]
North America: USA/canada VOGEL Europublishing Inc. +1-925-8031265 +1-925-80�1266 [email protected]
Asia: china Beijing Jigong Vogel Media +86-10-63326076 +86-10-6��26099 [email protected] Advertising Co., Ltd.
taiwan R.o.c. Taiwan Bright Marketing +886-2-27557901 +886-2-27557900 [email protected] & Communication Co., Ltd.
thailand Green World Media (Thailand) Co. Ltd. +66-2-3782388 +66-2-7698120 [email protected]
korea ACROSS-DEXIOR CAPITAL CO., LTD. +82 2 2052 3338 +82 2 2052 �552 [email protected]
Japan Japan Advertising +81-3-32614591 +81-�-�2616126 [email protected] Communications Inc. (JAC)
Stat
us: 1
1.12
.200
9