Date post: | 30-Dec-2015 |
Category: |
Documents |
Upload: | blake-wilkinson |
View: | 226 times |
Download: | 0 times |
Medical Device Innovations LimitedDaresbury Innovation CentreDaresbury International Science & Technology Park,Halton,Cheshire WA4 4FS
www.mdi-md.com
© Medical Device Innovations Ltd. 2005 Our Innovations: LubriTorqueTM Case Study 2
Starting Position: The Clinical Need
Invented by a practising radiologist
Identified need for improved lubrication when placing radiological guidewires.
• The Clinical Need; failure to lubricate causes wire to stick= Risk to patient= Delay/abandonment of procedure= Waste of wire, waste of theatre time= Major cost implications
• MDi’s First Steps: • Filed patent on wire lubricator device via United Bristol Healthcare Trust.
© Medical Device Innovations Ltd. 2005 Our Innovations: LubriTorqueTM Case Study 3
Inventor’s Original Concept
Single Function: ‘Lubrication’
Extend usage
Multiple functionalityPatent Drawing
© Medical Device Innovations Ltd. 2005 Our Innovations: LubriTorqueTM Case Study 4
MDi Involvement
Original Drawing
Multiple functionality
TORQUING
PUSH
© Medical Device Innovations Ltd. 2005 Our Innovations: LubriTorqueTM Case Study 5
MDi Involvement
Original Drawing
Multiple functionality
PLACEMENT
PUSH
© Medical Device Innovations Ltd. 2005 Our Innovations: LubriTorqueTM Case Study 6
MDi Involvement
Original Drawing
Multiple functionality
INTERNAL RESERVOIR
© Medical Device Innovations Ltd. 2005 Our Innovations: LubriTorqueTM Case Study 7
MDi Involvement
Design & Development
© Medical Device Innovations Ltd. 2005 Our Innovations: LubriTorqueTM Case Study 8
MDi Involvement
Design & Development
© Medical Device Innovations Ltd. 2005 Our Innovations: LubriTorqueTM Case Study 9
LubriTorqueTM – How it works...
The Finished Article...
Design & Development
LubriTorqueTM
Next>
Stage: [ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ] [ 7 ] [ 8 ] [ 9 ]
Stage 1
© Medical Device Innovations Ltd. 2005 Our Innovations: LubriTorqueTM Case Study 10
The Finished Article...
Design & Development
Stage: [ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ] [ 7 ] [ 8 ] [ 9 ]
<Previous Next>
LubriTorqueTM – How it works...
Stage 2
Push and lift with thumb
LubriTorqueTM
© Medical Device Innovations Ltd. 2005 Our Innovations: LubriTorqueTM Case Study 11
The Finished Article...
Design & Development
Stage: [ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ] [ 7 ] [ 8 ] [ 9 ]
<Previous Next>
LubriTorqueTM – How it works...
Stage 3
Part ‘Clicks’ Open
LubriTorqueTM
© Medical Device Innovations Ltd. 2005 Our Innovations: LubriTorqueTM Case Study 12
The Finished Article...
Design & Development
Stage: [ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ] [ 7 ] [ 8 ] [ 9 ]
<Previous Next>
LubriTorqueTM – How it works...
Stage 4
Hold part at both ends and rest over remaining fingers
LubriTorqueTM
© Medical Device Innovations Ltd. 2005 Our Innovations: LubriTorqueTM Case Study 13
The Finished Article...
Design & Development
Stage: [ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ] [ 7 ] [ 8 ] [ 9 ]
<Previous Next>
LubriTorqueTM – How it works...
Stage 5
Place wire across the centre of the part; no accuracy required
LubriTorqueTM
© Medical Device Innovations Ltd. 2005 Our Innovations: LubriTorqueTM Case Study 14
The Finished Article...
Design & Development
Stage: [ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ] [ 7 ] [ 8 ] [ 9 ]
<Previous Next>
LubriTorqueTM – How it works...
Stage 6
LubriTorqueTM
© Medical Device Innovations Ltd. 2005 Our Innovations: LubriTorqueTM Case Study 15
The Finished Article...
Design & Development
Stage: [ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ] [ 7 ] [ 8 ] [ 9 ]
<Previous Next>
LubriTorqueTM – How it works...
Stage 7
The ‘V’ Guides will ensure the wire is correctly located
LubriTorqueTM
© Medical Device Innovations Ltd. 2005 Our Innovations: LubriTorqueTM Case Study 16
<Previous Next>
Stage: [ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ] [ 7 ] [ 8 ] [ 9 ]
The Finished Article...
Design & Development
LubriTorqueTM – How it works...
Stage 8
‘Click’ closed
LubriTorqueTM
© Medical Device Innovations Ltd. 2005 Our Innovations: LubriTorqueTM Case Study 17
Stage: [ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ] [ 7 ] [ 8 ] [ 9 ]
The Finished Article...
Design & Development
<Previous
LubriTorqueTM – How it works...
Stage 9
Process complete
LubriTorqueTM
© Medical Device Innovations Ltd. 2005 Our Innovations: LubriTorqueTM Case Study 18
MDi Ltd. is currently in negotiations with several potential commercial partners, however enquiries from all interested parties would be welcome.
Please contact:
Martyn Collett,Business Development DirectorEmail: [email protected]: 01925 607030