Meeting Room:Wen Hua Ballroom

The Fourth Chinese International Turbomachinery Conference & Exhibition

Time

9:00-9:40

9:40-10:20

10:20-10:50

No./Title

☆202009958 （（Invited Talk））

Turbomachinery instability traceability diagnosis

and self-recovery regulation


Investigation of flow mechanism on the develop-

ing characteristics and the interaction of rotating

stall and surge in centrifugal compressors

Coffee Break

Author/Affiliation

Jin-ji GaoBeijing University of Chemical Technology

Guang XiXi’an Jiaotong University

8:30-9:00

Chairman: Chu-hua Zhang

Opening CeremonySpeech delivered by:Yong Zhang,Chief engineer,Shenyang Blower Works Group Corporation

Guang Xi,Vice Principal ,Xi’an Jiaotong University

Gang Wang, Party Secretary, Hangzhou Steam Turbine Co.,Ltd.

31th Oct,2020 KEYNOTE LECTURES English Session

Meeting Room:Wen Hua Ballroom

Chairperson:Hong Wang Gang Wang

10:50-11:30

11:30-12:10

☆2020101016 （（Invited Talk））

Investigation of the flow in the tip region of a

compressor cascade and its coupling with blade

vibration


Optimization of compressor rotor integrated with

casing treatment

Hong-wei Ma

Beihang University

Hai-xin Chen

Tsinghua University

·· 1


31th Oct KEYNOTE LECTURES English Session

Meeting Room:Wen Hua ballroom Chairman:Cun-liang Liu

Time

13:40-14:20

14:20-15:00

15:00-15:40

15:40-16:00

16:00-16:40

16:40-17:20

No./ Title

☆2020101035 （Invited Talk）

Studyonvibrationlocalizationinducedby typical mis-

tuning in impellers with cyclic symmetry and its con-

trolling


Multi- objective, multi- disciplinary inverse design

based automatic optimization of turbomachinery


Stability issues for new generation of engines appli-

cation of ML in turbomachinery

Coffee Break


Multi- component multi- discipline multi- scale inter-

actions-challenges and opportunities for turboma-

chinery CFD


Surface vortex flow control and heat transfer en-

hancement-from gas turbine blade cooling to heat ex-

changer performance improvement

Author/Affiliation

Jia-zhong Zhang

Xi'an Jiaotong University

Mehrdad Zangeneh

Department of Mechanical Engineering, University college

London,UK

Mehdi Vahdati

Imperial College London,UK

Li He

University of Oxford,UK

Yu Rao

Shanghai Jiao Tong University

·· 2


31th Oct KEYNOTE LECTURES:PUMPS AND HYDROTURBINES English Session

Meeting Room:Jia Hua Ballroom Chairman: Hong-xun Chen

Time

13:40-14:20

14:20-15:00

15:00-15:40

15:40-16:00

Chairman: Wei Han

16:00-16:40

16:40-17:20

17:20-18:00

No./ Title


Thermodynamic effects on Venturi cavitation

characteristics


On the physical mechanisms and mitigation of tip

vortex cavitation


Influences of the heavy medium on characteristics

of an axial flow pump

Coffee Break


Pressure pulsation mechanism of centrifugal pump

and its relationship with vibration


Centrifugal pump flow analysis: state of the art and

perspectives


Maximum Likelihood Identification of Flow Instabil-

ities in Cavitating Inducers

Author/Affiliation

Shu-hong Liu

Tsinghua University

Farhat Mohamed

Eole Polytechnique Federale De Lausanne,Switzerland

Cong-xin Yang

Lanzhou University of Technology

Hong-xun Chen

Shanghai University

Gerard Bois

Arts et Metiers ParisTech,France

Luca d' Agostino

University of Pisa,Italy

·· 3


31th Oct KEYNOTE LECTURES:NEW TECHNOLOGY English Session

Meeting Room:Yao Hu hall Chairman: Hai-xin Chen

Time

13:40-14:20

14:20-15:00

15:00-15:40

15:40-16:00

No./ Title


Advanced simulation and analysis techniques for axi-

al fan noise and the hot gas ingress into the rim seal

of an axial turbine


Foil bearing technology for high speed single stage

air compressors for fuel cell applications


De-centralized gas turbine solutions for the challeng-

es of tomorrow

Coffee Break

Author/Affiliation

Matthias Meinke

Institute of Aerodynamics,RWTH Aachen University,Germany

Kim Daejong

University of Texas at Arlington,USA

Robert Krewinkel

MAN Engergy Solutions SE,Germany

·· 4


13:40-14:20

14:20-15:00

15:00-15:40

15:40-16:00


A key for turbomachinery digital twin solution:

generalized deep learning analytics for cross- fleet

fault diagnostics


The development and applications of an in- house

CFD code for turbomachinery


Research on external infrared radiation loading tech-

nology for hot components in aero-engine

Coffee Break

Xiao-mo Jiang

Dalian University of Technolagy

Fang-fei Ning

Beihang University

Xian-long Meng

Northwestern Polytechnical University

31th Oct KEYNOTE LECTURES:NEW TECHNOLOGY Chinese Session

Meeting Room:Hui Jian Hall Chairman: Xiao-fang Wang

Time No./ Title Author/Affiliation

·· 5


31th Oct AERODYNAMIC DESIGN AND OPTIMIZATION: COMPRESSORS English Session

Meeting Room:Shang Qing hall Chairman: Rong Xie

Time

13:20-13:40

13:40-14:00

14:00-14:20

14:20-14:40

14:40-15:00

15:00-15:20

15:20-15:40

15:40-16:00

No./ Title

202009924

Effect of working fluid physical properties on aero-

dynamic performance of subsonic axial compressor

rotor

202010960

Effect of dimple's depth- diameter ratio on highly-

loaded compressor cascade

202009913

Numerical investigation of the flow field and aerody-

namic load on impellers under radial inlet guide

vanes with trailing edge blowing in centrifugal com-

pressor

202005851

Study on the method of expanding stability of cen-

trifugal compressor

201910622

Research on the unsteadiness in the tip flowfield for

axial compressor

202004838

Analysis of jet suppressing root leakage in plane cas-

cade

201909590

Aerodynamic optimal design of multistage axial-

flow industry compressor configurations using air-

craft engine technology

Coffee Break

Author/Affiliation

Zhi-tao Tian1;Adil Malik2;Long Wang1; Hua-wei Lu1

1.Dalian Maritime University；

2.Harbin Engineering University

Long Wang1;Hua-wei Lu1;Zi-xin Ping1;Shuang Guo2;

Zhi-tao Tian1;Xiao-zhi Kong 1

1.Marine Engineering College，Dalian Maritime University；

2.School of Energy and Power Engineering, Dalian University

of Technology

Jian- chi Xin1;Hai- tao Liu2;Zhi- tao Tian1;Xiang- yang

Liu1;Xiao-zhi Kong1;Xiao-fang Wang2

1.Dalian Maritime University;

2.Dalian University of Technology

Chun-yang Li;Chun-jun Ji

Dalian University of Technology, School of Energy and Power

Engineering

Mo-ru Song;Bo Yang

Shanghai Jiao Tong University

Meng Tang;Xin Fu;Ying-ying Xu

Nanjing University of Aeronautics and Astronautics

Fan Lei; Ya-ping Ju; Chu-hua Zhang

School of Energy and Power Engineering, Xi’an Jiaotong Uni-

versity

·· 6


31th Oct AERODYNAMIC DESIGN AND OPTIMIZATION: COMPRESSORS English Session

Meeting Room:Shang Qing Hall Chairman: Jin-guang Yang

Time

16:00-16:20

16:20-16:40

16:40-17:00

17:00-17:20

17:20-17:40

17:40-18:00

No./ Title

201909589

Optimzation of a 40MW SCO2 cycle and aerodynam-

ic design of compressor

202002814

Research on the effect of partial pressure side wing-

let on the performance of high-loaded compressor ro-

tor

202010989

Modeling and analysis of the compressor for the

large continuous wind tunnel on anti-surge process

202002812

Effect of elliptical leading edge on the aerodynamic

perfomance of a compressor static blade

2020101020

An investigation of the shell-side flow of a shell-and-

tube exchanger with impingment plate

202009903

Numerical investigation of leaned strake in the ram-

rotor

Author/Affiliation

Hao Li1; Ya-ping Ju1;Yong Zhang2;Chu-hua Zhang1

1.School of Energy and Power Engineering, Xi’an Jiaotong

University;

2.Shenyang Blower Works Group Corporation

Han Teng1;Jing-jun Zhong2

1.Dalian Maritime University;

2.Shanghai Maritime University

Yong-rui Sun;Li-xin Yao;Xin Jin;Yu-ying Sun;

Chen Tao

Shenyang Blower Works Group Corporation

Ling Yang1;Jing-jun Zhong1;Xiao-xu Kan1;Lei Duan2

1.Shanghai Maritime University;

2.Dalian Maritime University

Yi Wang1,2;Guo-liang Qin1;Shu-hua Yang2;Yong Zhang2;

Qin Cui1;Cheng Jia1

1.School of Energy and Power Engineering, Xi'an Jiaotong

University;


Jian Guan1;Ji-ang Han1;Ke-xin Yu1;Jing-jun Zhong2

1.Naval Architecture and Ocean Engineering College, Dalian

Maritime University;

2.Merchant Marine College, Shanghai Maritime University

·· 7


31th Oct EXPERIMENTS AND MEASUREMENT TECHNIQUES English Session

Meeting Room:Lu Shan Hall Chairman:Hua-wei Lu

Time

14:00-14:40

14:40-15:20

15:20-15:40

15:40-16:00

16:00-16:20

16:20-16:40

16:40-17:00

17:00-17:20

17:20-17:40

17:40-18:00

No./ Title


Pressure sensitive paint systems and industrial appli-

cations


Research of five- hole probe testing system used in

turbomachinery cascade experiment

202005859

Research on the adjustable guide vane in a compres-

sor sector cascade

Coffee Break

202009950

An experimental platform with rotating airflow exci-

tation and stationary blisk vibration measurement

201910617

Design of basic stage performance test rig for axial

compressor

202002804

Effect of solid heat conduction on accuracy and effi-

ciency in steady-state liquid-crystal measurement of

flat gas film heat transfer coefficient

202001767

Characteristics of the supersonic flow dominated by

large-scale streamwise vortices

201910620

Experimental investigation and optimal design of

power turbine generator set

202002813

Experimental Investigation of the Influence on com-

pressor cascade characteristics at high subsonic

speed with pressure surface tip winglets

Author/Affiliation

Hong-jie Zhong

AVIC Aerodynamics Research Institute

Hua-wei Lu

Dalian Maritime University

Wen-feng Xu1;Peng Sun2;Guo-gang Yang1

1.Dalian Maritime University, Dalian, China;

2.Civil Aviation University of China

Luo-hui Ouyang1;Qing-zhen Bi1;Hai Shang1;

Li-min Zhu1;Jian-hua Yu2

1.Shanghai Jiao Tong University;

2.AECC Commercial Aircraft Engine Co., Ltd.

Yi-tian Wang;Ji-cheng Duan;Hong-min Zhao;

Mei-ying Wang;Dong Ren;Xue Yang;Wei-bo Yan

Xi’an ShaanGu Power Co.,Ltd.

Qi-chao Xue;Hong-yu Gao;Xue-ying Li;，Jing Ren

Department of Energy and Power Engineering, Tsinghua Uni-

versity

Qian-cheng Wang;Yu-xin zhao;Cheng-long Wang

Science &Technology on Scramjet Laboratory, National Uni-

versity of Defense Technology

Pei-jun Qin;Zi-jian Zhang;Jie-wei Peng;Jing-fen Li

Shanghai Marine Diesel Engine Research Institute

Wan-yang Wu;Jing-jun Zhong

Merchant Marine College, Shanghai Maritime University

·· 8


31th Oct HEAT TRANSFER English Session

Meeting Room:Mei Ling Hall Chairman:Hai-wang Li,Guang-chao Li

Time

14:00-14:40

14:40-15:20

15:20-15:40

15:40-16:00

16:00-16:40

16:40-17:00

17:00-17:20

17:20-17:40

17:40-18:00

No./ Title


Advancement in turbine endwall film cooling


Temperature Effect on the Lifetime of Turbine Blade

202003828

Numerical study on particle deposition characteris-

tics of impingement effusion cooling structure

Coffee Break


Degradation of the cooling performance of the dou-

ble wall nozzle guide vane in an engine

201909570

Numerical research on film cooling characteristics

of BESA hole with mist-air two-phase flow

201909583

Exit- shape effect of film holes at pressure side on

trailing edge cutback film cooling characteristics

202009917

Impact of blade leading edge film coolant on the

blade tip phantom cooling

202004850

Effects of equivalent porosity of impingement plate

on the flow and cooling characteristic of afterburner

heat shield

Author/Affiliation

Kun Du1;Cun-liang Liu1;Jun Li2;Bengt Sunden3

1.Northwestern Polytechnical University;

2.Xi’an Jiaotong University;

3.Lund University

Hai-wang Li; Ru-quan You

Beihang University

Bing- ran Li;Cun- liang Liu;Lin Li;Wen- bin Chen;Yi-

hong He


Guang-chao Li

Shenyang Aerospace University

Kang Huang;Hu-sheng Ma ;Pei-jie Shi;Dong-jian Liu

China Aerodynamics Research and Development Center

Jian Pu1;Jian-hua Wang1;Wei Song2;Wei-long Wu1

1.CAS Key Laboratory of Mechanical Behavior and Design

of Materials, Department of Thermal Science and Energy En-

gineering, University of Science and Technology of China;

2.Aero- engine Institute of Aviation Industry Corporation of

China

Feng Li;Zhao Liu;Zhen-ping Feng

Xi’an Jiaotong University

Rui Wang;Cun-liang Liu;Hai-yong Liu;Jia-jia Niu;

Hong-ren Sui

School of Power and Energy, Northwestern Polytechnical Uni-

versity

·· 9


31th Oct MATERIALS AND MANUFACTURING PROCESS Chinese Session

Meeting Room:Dong Shan Hall Chairman:Ming-yue Sun

Time

14:00-14:40

14:40-15:20

15:20-15:40

15:40-16:00

No./ Title


Application of the friction technology to the new

materials and structures of aeroengine


Research progress on inclusion clusters of ni- based

superalloy(s)

201912725

Cryogenic properties of abradable seal coating

Coffee Break

Author/Affiliation

Wen-hui Zhu

AVIC shenyang Liming Aero-Engine Group Corporation

Zhi-gang Wang

Fushun Special Steel Co.,Ltd.

Ke-ping Chen

Hangzhou Hang yang expander Co.,Ltd .

16:00-16:20

16:20-16:40

16:40-17:00

17:00-17:20

201912652

Study on acid corrosion characteristics in low-pres-

sure stage initial condensation zone of supercritical

H2O/CO2 turbine

2020101009

Investigation on high- temperature creep properties

of the materials for turbine compressors rotor

2020101010

Effect of gradient layer number on microstructure

and property of laser deposition TA15/TI2ALNB

transition zone

202008896

Analysis of influence of retrogression and reaging

treatment on mechanical properties of 7075 alumini-

um alloy

Zi-yue Ma;Xiao-fang Wang;Tao Jiang;Wei Wang;

Yang Xu

Dalian University of Technology

Cui-min Bao;Rui Chen;Zhi-peng Yang;Wei Chen;

Sheng-chi Wang


Bo He1;Ying-tong Lin1;Guang Yang1;Qing-jun Zhou2;

Xiang-ming Wang3

1.School of mechanical and electrical engineering, Shenyang

University of Aeronautics and Astronautics；

2.Capital Aerospace Machinery Co., Ltd；

3.Shenyang Aircraft Design and Research Institute，Aviation

Industry Corporation of China

Cai-yu Tang1;Rui-ming Su2

1.Shenyang Blower Works Group Corporation；

2.Shenyang University of Technology

·· 10


31th Oct STRUCTURAL DESIGN：STRENGTH & VIBRATION English Session

Meeting Room:Boardroom Chairman: Yue-fang Wang

Time

14:00-14:40

14:40-15:20

15:20-15:40

15:40-16:00

No./ Title


Harmonic balance method applied to vibration of air-

craft engine in the presence of contact nonlinearities


Influence of tip clearance distribution on blade vibra-

tion in a radial turbine

202002794

The study of the contact interface for compressor blisk

with ring damper using noninear modal analysis

Coffee Break

Author/Affiliation

Loic Salles

Imperial College London

Lei Pan；Ming-yang Yang；Shou-ta Murae；Wataru Sa-

to；Naoto Shimohara；Akihiro Yamagata

Shanghai Jiao Tong University；

IHI Corporation, Yokohama, Japan

Ye-kai Sun;Jie Yuan;Enora Denimal; Loic Salles

Department of Mechanical Engineering, Imperial College Lon-

don

16:00-16:20

16:20-16:40

16:40-17:00

17:00-17:20

17:20-17:40

17:40-18:00

202001789

Research on structural parameters of array impinge-

ment jet cooling in gas turbine combustor liner

202007892

Low- speed straight flow wind tunnel design for

wind turbine test

201912731

Multiple critical areas life verification under single

low pressure turbine spin rig test based on safe life

approach

202009937

Research on intelligent diagnosis method for typical

vibration faults of rotating equipment

202010973

Investigation of time-series prediction for turbine

machinery condition monitoring

2021909573

Fault identification and health monitoring of gas

turbine engines using hybrid machine learning-based

strategies

Rong Xie;Hao Wang;Bao-peng Xu;Wei Wang

1.Key Laboratory of Ocean Energy Utilization and Energy

Conservation of Ministry of Education;

2.School of Energy and Power Engineering ,Dalian University

of Technology

Jin Xiong;Yi Xiang;Peng-hua Guo;Jing-yin Li


versity

Da-cheng Liu;Zhong-yan An;Guo-dong Chen

Strength Test Department, Shenyang Engine Research Institute

Xin Pan;Xian-cheng Zhang;Cong-cong Xu;Kun Feng;

Guo-cheng Tian

Beijing Key Laboratory of Health Monitoring and Self-recov-

ery for High-end Mechanical Equipment, Beijing University of

Chemical Technology；

2 Huadian Electric Power Research Institute Corporation

Chang-jun Liu1;Hai-tao Liu1;Chao Bian1;

Xu-dong Chen1;Shu-hua Yang2;Xiao-fang Wang1;


of Technology;


Yan-yan Shen;Khashayar Khorasani

Department of Electrical and Computer Engineering

Concordia Institute of Aerospace Design and Innovation

Concordia University Montreal, Quebec CANADA

·· 11


1th Nov KEYNOTE LECTURES: INDUSTRY Chinese Session

☆Invited Talk Meeting Room:Wen Hua ballroom Chairman:Guang Xi

Time

8:30-9:00

9:00-9:30

9:30-10:00

10:00-10:30

10:30-11:00

11:00-11:30

11:30-12:00

12:00-13:30

No./ Title

Three kinds of compressors for ethylene plant: devel-

opment and future

HTC industrial steam turbine technology develop-

ment and industrial application

A new generation of high- efficiency energy- saving

equipment based on aero engines

Coffee Break

Application of DongFang turbine technology in in-

dustrial field

Gas turbine technology and products of AECC

Research progress on homogenization manufactur-

ing of heavy components by metal additive forging

Buffet Lunch

Author/Affiliation

Yong Zhang


Xiao-fei Ma

Hangzhou Steam Turbine Co.,Ltd.

Guang-ping Lu

Chengdu Chengfa Science & Energy Power Engineering Co.,

Ltd.

He Li

Dongfang Turbine Co., Ltd.

Xin-he Gao

AECC Gas Turbine Co., Ltd.

Ming-yue Sun

Institute of Metal Research,Chinese Academy of Science

Chairman:Guang-ping Lu

13:30-14:00

14:00-14:30

14:30-15:00

15:00-15:30

15:30-16:00

Introduction of advanced technology and products

of Harbin Turbine Co., Ltd

Independent research and development progress of

Advanced Micro gas turbines

The evolution of FS-Elliot integrally gear compres-

sor

Technology import, digestion and absorption of

AP1000 nuclear pump

Coffee Break

Jing-sheng Wang

Harbin Turbine Company Limited

Cheng-qin Li

ENN Group

Ming-zhe Chen

FS-Elliott (Shanghai) Machinery Co.,Ltd.

Hong-chang Yu

Shenyang Blower Works Group Nuclear Pump Co.,Ltd.

16:00-16:30

16:30-17:00

17:00-17:30

17:30-18:00

Briefing on the turbo compressor technology deveo-

pment of MAN ES

Shaangu intelligent exploration and practice

Investigation of design elements of flow passage for

small high speed and high efficiency steam turbine

Energy- saving and efficiency increasing of pump

unit system based on digital method

Wen-ling Xiong

MAN Energy Solutions

Zhong Liu

Xi'an Shaangu Power Co., Ltd.

Hao Xu

Jin Tong Ling Technology Group Co., Ltd.

Bao-gang Wang

KSB Group

·· 12


1th Nov SEAL TECHNOLOGY English Session

Meeting Room:Hui Jian Hall Chairman:Jun Li

Time

8:30-9:10

9:10-9:30

9:30-9:50

9:50-10:10

10:10-10:30

Chairman:Dan Sun

10:30-10:50

10:50-11:10

11:10-11:30

11:30-11:50

11:50-12:10

No./ Title


Numerical prediction models for static and rotordy-

namic characteristics of annular seals operating un-

der two phase (liquid/gas) conditions

202009940

Design method and research of high temperature gas

floating ring seal with slightly variable gap

202003829

Structural parameter analysis of self-tightening met-

al U-shaped seal ring

202003826

Research and parameter optimization of magnetic

grease seal structure for fan shaft end

Coffee Break

201912729

Enhancing film stability of dry gas seal via proper

design of surface groove

201912661

Study on the influence of high temperature and high

speed working conditions on the leakage characteris-

tics of flexible bristle brush seal

201909587

Experimental investigation on leakage and wear

characteristics of carbon seal for aero-engine

201909565

Numerical investigations on the leakage and rotordy-

namic characteristics of two novel hole-pattern seals

with axially or circumferentially oblique cavity

201912681

Performance analysis of internal spiral groove dry

gas seal based on fluid-solid-thermal coupling meth-

od

Author/Affiliation

Zhi-gang Li;zhi fang;Jun Li

Xi'an Jiao Tong University

Ren-jie Shi;Shuang-xi Li;Rao Zhen;Li-jun Ma;

Jing-bo Zhang

Mechanical and Electrical Engineering, Beijing University of

Chemical Technology

Tian-fu Cheng;Shuang-xi Li

Beijing University of Chemical Technology

Shu-wen Li;Rao Zheng;Qiu-xiang Zhang;Shuang-xi Li


Jin-bo Jiang;Ji-yun Li;Xu-dong Peng

Engineering Research Center of Process Equipment and Its Re-

manufacturing of Ministry of Education, Zhejiang University

of Technology

Yu-huMa1;Shuang-xiLi1;Shan-yuZhang2;Hao-ranLiao1;

Lian-xiang Sha1

1.Mechanical and Electrical Engineering, Beijing University of

Chemical Technology;

2.China Aerospace Standardization Research Institute

Guo-qing Li1,2;Zhang Qian3;Jian-qin Zhu4;Qiang-peng

Yu5;Xin-gen Lu1,2

1. Institute of Engineering Thermophysics, Chinese Academy

of Sciences;2. University of Chinese Academy of Sciences;3.

Research Institute of Petroleum Exploration and Development;

4. Beihang University;5. AECC Commercial Aircraft Engine

Co., Ltd.

Zhi Fang, Zhi-gang Li, Jun Li

Institute of Turbomachinery, Xi’an Jiaotong University

Shuang- xi Li;Hao- ran Liao;Rao Zheng;Shi- cong Li;

Yu-hu Ma; Kun-yi Chen


·· 13


1th Nov INDUSTRIAL FANS Chinese Session

Meeting Room:Shang Qing Hall Chairman:Xiao-min Liu

Time

8:30-9:10

9:10-9:30

9:30-9:50

9:50-10:10

Chairman:Song Li

10:10-10:30

10:30-10:50

10:50-11:10

11:10-11:30

11:30-11:50

11:50-12:10

No./ Title


A review on optimal design of fluid machinery

based on machine learning method

201910627

Fan optimization of self- ventilated traction motor

based on similar design theory

202001775

Numerical study of a new method of collecting fume

for an exhaust hook

Coffee Break

201911638

Investigation of noise characteristics of periodic jet

impinging on a flat plate

202002791

Numerical study of different blade types on large

double suction and double support centrifugal fan

201909545

Numerical study on the influence of different intake

structure on double-suction centrifugal blower

202002803

Optimization design and verification of centrifugal

fan based on parametric modeling

202001782

Design method applied to magnetic bearing system

in high-speed centrifugal blower

202003824

Rotor Dynamics Test of 75kW Oil- free Turbo

Blower

Author/Affiliation

Yi- ran Wang;Wen- jun Zhao;Lian- guo Liang;Qi Wu;

Han-hui Jin;Can-xing Wang

School of Aeronautics and Aerospace, Zhejiang University；

Hangzhou Dunli Electric Appliance Co., Ltd.；

Zhejiang Zhefeng Science and Technology Co., Ltd.

Zheng Shen;Wei-Lin He;Li-Ming Tang;Yi-Hui Wang

CRRC Zhuzhou Electric Co.,Ltd.

Xue-jiang Chen;Qi-shao Zhao


Xin Liu;He-yuan Huang;Xiao-liang Guo;Jun-long Xie

School of Energy and Power Engineering, Huazhong Universi-

ty of Science & Technology

Du-Ping Fan;Xiao-ping Cao

Changsha blower Co.,Ltd.;

Changsha Radio & TV University

Xiao-ping Cao;Du-ping Fan

Hunan Radio and Television University；

Changsha Blower Co.,Ltd.

Min-biao Lu;Yong-chao Pan;Xiao-bing Yang;

Zhe Zhang;Ming Zhang

Nanjing Tianfu Software Co.,Ltd.

Ying-zhe Zhang;Jun-pu Niu

Shandong Tomorrow Machinery Group Co.,Ltd.

Wen-lin Luan1;Fang-cheng Xu2;Liu-kai Hou3;Bo He4;

Bin Wu5;Guang Zhao1

1.Dalian University of Technology, School of Energy and

Power Engineering;

2.Dalian University of Technology, School of Control Science

and Engineering;

3.Beijing Aerospace Propulsion Institute;

4.Shijiazhuang Kingston Bearing Technology Co., Ltd.;

5.Suzhou Dongling Vibration Test Instrument Co., Ltd.

·· 14


1th Nov PUMPS AND HYDROTURBINES English Session

Meeting Room:Mei Ling Hall Chairman:Xiao-rui Cheng

Time

10:20-10:40

10:40-11:00

11:00-11:20

11:20-11:40

11:40-12:00

12:00-12:30

No./ Title

202009955

Effect of tip clearance change on the flow structure

of tip leakage flow in centrifugal pump

2020101029

Influence of inlet flow field uniformity on the perfor-

mance of the nuclear main pump

201912674

Optimization design of centrifugal pump impeller

based on intelligent optimization algorithm

201911640

Tesla bladed pump (disc bladed pump) preliminary

experimental performance analysis

202007893

The influence of wall roughness on centrifugal

pump performance

Coffee Break

Author/Affiliation

Yi-meng Jiang;Xiao-rui Cheng

Lanzhou University of Technology

Long Sha;Shu-hua Yang;Xiang-dong Kong;Hui Su;

Lin Pei

Shenyang Blower Works Group Corporation;

Wei-wei Wang;Lei Guo

Beijing Hi-Key Tech Co.,Ltd.

Qi- feng Jiang1;Yu- ming Han1;Hui- yu Zhang1;Wei- bin

Zhang1;Ya-guang Heng1;Gérard Bois1,2;Xiao-bing Liu1

1.Key Laboratory of Fluid and Power Machinery, Xihua Uni-

versity;

2.LMFL, FRE CNRS 3723, ENSAM59046 Lille CEDEX,

France

Von-Hao Wang;Kun-Hang Li;Jing-Yin Li


versity

·· 15


1th Nov KEYNOTE LECTURES English Session

Meeting Room:Jia Hua Ballroom Chairman: Hua Chen

Time

13:40-14:20

14:20-15:00

15:00-15:40

15:40-16:00

16:00-16:40

16:40-17:20

17:20-18:00

No./ Title


Low speed modelling of axial compressor stages

with large relative tip clearance – a review on 25

years of research at the LSRC Dresden

☆2020101031 （（Invited Talk））

Propulsion system aerodynamics


Investigation on the coupling effect between nacelle

inlet and compressor

Coffee Break

202009922

Towards enhanced reliability of Turbomachinery

CFD predictions

2020101015

Responsible aviation options

202009921

High speed spindles supported with aerostatic

bearings: design methodology and prototypes

Author/Affiliation

Martin Lange

Technische Universität Dresden,Germany

Pavlos K.Zachos

School of Aerospace, Cranfield University,UK

Li Zhou


Hirsch Charles

NUMECA

Peter RN Childs

Imperial Couege London

Federico Colombo

Department of Mechanical and Aerospace Engineering,

Politecnico di Torino, Italy

·· 16


1th Nov AERODYNAMIC DESIGN AND OPTIMIZATION: GAS TURBINES English Session

Meeting Room:Shang Qing Hall Chairman:Qun Zheng

Time

14:00-14:40

14:40-15:20

15:20-15:40

15:40-16:00

16:00-16:20

16:20-16:40

No./ Title


The design and flow control of highly loaded com-

pressor


The effect of investigation of complex flow pattern

at combustor exit on the aero- thermal performance

of high-pressure turbine

202002815

Investigation on axial turbine similarity criterion and

performance modeling methods

Coffee Break

201912717

Investigation of the effect of geometric scaling on

aerodynamic performance of a compressor rotor

201911641

Investigation on interaction between geometry and

performance and design of S-CO2 radial inflow tur-

bine's vaneless inlet volute

Author/Affiliation

Song-tao Wang

Harbin Institute of Technology

Wei-lin Yi

Beijing Institute of Technology

Peng- hui Wang1;Wei- hao Zhang1; Shou- min Jiang2;

Qiang Chen2; Yun Chen2;Bei Hang2

1.Beihang University;

2.AECC Shenyang Engine Research Institute;

Hang-kong Wu;Ding-xi Wang;Xiu-quan Huang;

Bo-qian Wang


Chang Zhu1;Wen-yang Shao1;Zi-yue Ma1;

Guo-chuan Lv2; Xiao-fang Wang1

1.Dalian University of Technology;

2.AVIC Nanjing Mechanical and Electrical Technology Co.,

Ltd.

·· 17


1th Nov AERODYNAMIC DESIGN AND OPTIMIZATION: GAS TURBINES English Session

Meeting Room:Shang Qing Hall Chairman:Xin-rong Su

Time

16:40-17:00

17:00-17:20

17:20-17:40

17:40-18:00

No./ Title

202003822

Laminar separation simulation and passive flow con-

trol within a low speed axial turbine at ultra low

Reynolds number

202001762

A Numerical Investigation on Flow Characteristics

of Transonic Tip Gap Flow

201909560

Analysis of the relationship between turbulence char-

acteristics and loss mechanism in the tip leakage

flow of turbine blade

201912656

The influence mechanism of rim sealing flow to the

performance of the axial turbine

Author/Affiliation

Xiao-dong Wang1; Zhong Kang1; Ming-yang Chen1;

Jun-yu Liang2

1.Key Laboratory of Power Station Energy Transfer Conver-

sion and System, Ministry of Education, North China Electric

Power University;

2.Electric Power Science Research Institute, Yunnan Electric

Power Grid Co., Ltd.

Cheng-long Wang;Wu-heng Feng;Qian-cheng Wang;

Yu-xin Zhao

Science and Technology on Scramjet Laboratory, National Uni-

versity of Defense Technology

Hui Li; Xin-rong Su; Xin Yuan

Tsinghua University

Wei-pengXue;Wei-taoZhang;JunZeng;Guo-qingTang

AECC Sichuan Gas Turbine Establishment

·· 18


1th Nov AIRCRAFT ENGINE English Session

Meeting Room:Jing De Hall Chairman:Hong Yan

Time

14:00-14:40

14:40-15:00

15:00-15:20

15:20-15:40

15:40-16:00

16:00-16:20

No./ Title


CFD based through flow method and its application

in turbomachinery and aeroengine simulation

202004836

Rapid prediction method of fan broadband noise

based on three-dimensional sound source model

202005852

Study on the aerodynamic performance and internal/

external flow interaction effects of distributed duct-

ed fan in

202001749

Three- dimensional CFD simulation of micro turbo-

jet engine

202009941

Numerical study on the influence of chord length ra-

tio of axial supersonic through-flow tandem configu-

ration on aerodynamic performance

202005872

Volumetric entropy generation rate associated with

tip clearance flow in linear cascade

Author/Affiliation

Jin-guang Yang


Ye Yang1，2;Dang-guo Yang1，2;Liang-feng Wang1，2

1.High Speed Institute of China Aerodynamics Research and

Development Center;

2.State Key Lab of Aerodynamics

Tian-yu Gong1;Peng-xiang Liang1;Zhuo-qi Wang2;

Wei Yuan1

1.National Key Laboratory of Science and Technology on

Aero- Engine Aero- thermodynamics, School of Energy and

Power Engineering, Beihang University;

2. Unmanned System Institute, Beihang University

Min Zhang1;Tong-yi Li2;Nan Su2,3;Jin-guang Yang2;Yan

Liu2

1.Key Laboratory of Ocean Energy Utilization and Energy

Conservation of Ministry of Education, School of Energy and

Power, Dalian University of Technology ;

2.National Petroleum and Natural Gas Pipe Network Group

Co., Ltd.;

3.State Key Laboratory of Structural Analysis for Industrial

Equipment, Department of Engineering Mechanics, Dalian

University of Technology

Jia-qi Hao1;Shi- jun Sun1;Ju-tao Yang1;Ling Zhou1;Lu-

cheng Ji2

1.School of Aerospace Engineering, Beijing Institute of Tech-

nology；

2. Institute for Aero Engine, Tsinghua University

Bing-xiang Long;Qin Chen;Ze-bin Ren;Da-xiong Liao

Chinese Aerodynamics Research and Development Center

·· 19


1th Nov SUSPENDING TURBOMACHINERY English Session

Meeting Room:Yao Hu Hall Chairman: Lei Zhao Qing Wei

Time

13:40-14:20

14:20-14:40

14:40-15:00

15:00-15:20

15:20-15:40

15:20-16:00

No./ Title

☆202001788 （invited talk）

Design approach of foil bearings for refrigerant tur-

bo compressors and orc generators

202009953

Magnetic bearing based high- speed motor system

and its applications in turbo-machinery

202009959

Development and applications of universal modular

control system of active magnetic bearing

202005854

Research on the relationship between dynamic be-

havior of active magnetic bearing system and the

performance of the auxiliary bearing

202010981

Design of industrial high speed compressor with

magnetic bearings

Coffee Break

Author/Affiliation

Dajong Kim

University of Texas at Arlington

Qing Wei

Esurging(Tianjin)Technology Co.,Ltd.

Cheng-ke Yin

School of mechanical and electrical engineering, Soochow Uni-

versity;

Supermag magnetic bearing motor

Zhe Sun1,2,3;Guo-jun Yang1,2,3;Jing-jing Zhao1,2,3;

Xun-shi Yan1,2,3;Zhen-gang Shi 1,2,3

1. Institute of Nuclear and New Energy Technology, Tsinghua

University;

2.Collaborative Innovation Center of Advanced Nuclear Ener-

gy Technology;

3. The Key Laboratory of Advanced Reactor Engineering and

Safety, Ministry of Education

Hong-yang Liang;Xian-hao Ma;Chun-yan Wang;

Hua-jun Wang

Suzhou Palboom Electric Co.,Ltd.

·· 20


1th Nov SUSPENDING TURBOMACHINERY English Session

Meeting Room:Yao Hu Hall Chairman: Lei Zhao Qing Wei

Time

16:00-16:40

16:40-17:00

No./ Title

202005853

Analysis of dynamic behaviors in an nonlinear

active magnetic bearing-rotor system

202001751

Research on the active vibration isolation method by

magnetic bearing

Author/Affiliation

Xiao- shen Zhang1,2,3;Zhe Sun1,2,3;Lei Zhao1,2,3;Xun- shi

Yan1,2,3;Jing-jing Zhao1,2,3;Zhen-gang Shi 1,2,3

1.Institute of Nuclear and New Energy Technology, Tsinghua

University;

2.Collaborative Innovation Center of Advanced Nuclear

Energy Technology;

3.The Key Laboratory of Advanced Reactor Engineering and

Safety, Ministry of Education

Run-hui Yao;Jin Zhou;Hai-tong Wu

Nanjing University of Aeronautics and Astronautics

·· 21


1th Nov FUNDAMENTAL THEORY AND METHODOLOGY English Session

Meeting Room:Boardroom Chairman: Jia-zhong Zhang

Time

14:20-15:00

15:00-15:40

15:40-16:00

16:00-16:20

No./ Title


Toward realization of numerical towing- tank tests

by wall- resolved large EDDY simulation based on

32 billion grid finite-element computation


A parallel continous adjoint method for design opti-

mization of a transonic compressor rotor

Coffee Break

201909585

Coherent structures in a turbulent plane jet predicted

by large eddy simulations

Author/Affiliation

Chisachi Kato

University of Tokyo

Yu-jie Zhu1;An Liu1;Ya-ping Ju1;Chu-hua Zhang2

1.School of Energy and Power Engineering, Xi’an Jiaotong

University;

2.State Key Laboratory for Strength and Vibration of Mechani-

cal Structures, Xi’an Jiaotong University

Qi-lin Liu, Huan-xin Lai

East China University of Science and Technology

16:20-16:40

16:40-17:00

17:00-17:20

17:20-17:40

201912723

A high- accuracy and conservative overset grid data

transfer method for numerical simulation of turboma-

chinery

202009915

Study of turbulent flow field and noise in low mach

number chevrons nozzles

202009948

A comparative study on multi-task learning methods

for modeling and analysis of multi- fidelity simula-

tion data

202010968

Impact of exploration-exploitation trade-off on UCB-

based bayesian optimization

Peng-cheng Cui;Jing Tang;Bin Li;Huan Li;Xiao-quan

Gong;Ming-sheng Ma


Qing-bo Meng;Huan-xin Lai

East China University of Science and Technology

Kai Wu;Xiao-fang Wang;Chao Bian;Hai-tao Liu

School of Energy and Power Engineering, Dalian University

of Technology

Chao Bian; Xiao-fang Wang; Chang-jun Liu; Xin-yu Xie;

Hai-tao Liu


·· 22


1th Nov ROTORDYNAMIC AND BEARINGS Chinese Session

Meeting Room:Lu Shan Hall Chairman: Wei-min Wang

Time

14:00-14:40

14:40-15:00

15:00-15:20

15:20-15:40

15:40-16:00

No./ Title


Study on dynamic characteristics of seal- rotor-

system with crack damage faults

202004834

Analysis and Experimental Study on Dynamic Char-

acteristics of an Aero-engine Power Turbine Rotor

202009906

Analysis of rotor dynamic characteristics and no-

load test on industrial steam turbine with high speed

202009926

Research on aero-engine rotor dynamics considering

bolt loosening characteristics

Coffee Break

Author/Affiliation

Yue-gangLuo;Hai-fengJia;TaoZhou;Feng-chaoHuang

College of Mechanical and Electronic Engineering, Dalian

Minzu University;

Key Laboratory of Intelligent Perception and Advanced

Control of State Ethnic Affairs Commission, Dalian Minzu

University

Wei-jian Nie1，2;Wang-Qun Deng1，2;Ya-nong Chen1，2

1. AECC Hunan Aviation Powerplant Research Institute;

2. Key Laboratory of Aero engine Vibration Technology, Aero

Engine Corporation of China

Long Wang1;Gao-hui Xiao1;Chuan-yue Zhou2

1.Shanghai Electric Power Generation Equipment Co., Ltd,

Turbine Plant；

2.Beijing EMAX Technology Co.,Ltd.

Qing-shan Zhang;Shi-yuan Pei;Jun Hong


16:00-16:20

202009918

Rotordynamic stability analysis of centrifugal

compressor with impeller aerodynamic effect

Shu-hua Yang1;Xing-yu Tai1;Ji-gang Meng1;

Zhong-hui Xiao1;Xiao-fang Wang2

1.Shenyang Blower Works Group Corporation;


of Technology

·· 23


1th Nov ROTORDYNAMIC AND BEARINGS Chinese Session

Meeting Room:Lu Shan Hall Chairman: Xin Pan

Time

16:20-16:40

16:40-17:00

17:00-17:20

17:20-17:40

17:40-18:00

No./ Title

201912679

Effects of scratches on the performance degradation

of a thrust bearing

202004839

Dynamic analysis and experimental research on the

cantilever high speed rotor of turbofan engine

202001774

Study on hybrid dynamic modeling method of high-

speed gearbox multi-parallel shafting-bearing-box

201912703

Research on vibration properties of multi-span pow-

er turbine system

201911643

Rotordynamic analysis of centrifugal compressor in-

cluding support flexibility effects

Author/Affiliation

Wen-bin Zheng;Shi-yuan Pei;Jun Hong

Xi'an Jiaotong University

Wei- jian Nie;Wang- qun Deng;Sheng Yuan;Ya- nong

Chen

AECC Hunan Aviation Powerplant Research Institute;

Key Laboratory of Aero engine Vibration Technology, Aero En-

gine Corporation of China

Fang- hui Zhao1;Wei- min Wang1，2;Deng- peng Zhang1;

Jia-le Wang1

1.Beijing University of Chemical Technology. Beijing key Lab-

oratory of Health Monitoring and self-healing of High-end Ma-

chinery and equipment;2.State Key Laboratory of Compressor

Technology

Zhi-lian Zhang1;Ling-yu Wang1;Qiang Lu2;

Jing-chun Liu3

1.Beijing University of Petrochemical Technology；

2.AVIC APC Integration Equipment Co., Ltd.；

3.AVIC Xi’an Aero-engine Ltd.

Xing-yu Tai;Kai-hua Li;Yun Li;Ji-gang Meng; Zhong-

hui Xiao;Jian-wei Li


·· 24



Meeting Room:Hui Jian Hal Chairman: Shu-hong Liu

Time

14:00-14:40

14:40-15:20

15:20-15:40

15:40-16:00

No./ Title


Analysis of cavitation erosion risk in a water jet

pump


Developing innovative active flow control so-

lutions for hydropower in the frame of

the AFC4Hydro project

202004845

Study on the calculation method for pumping pro-

cess in a vacuum system

Coffee Break

Author/Affiliation

Richard Bensow

Chalmers University of Technology，Sweden

Xavier Escal

Universitat Politècnica de Catalunya (UPC),Spain

Si Huang1;Jia-wei Guo1;Tian-kun Yi1;Song-feng Li2;Tai-

zhong Wu2

1.School of Mechanical and Automotive Engineering, South

China University of Technology；

2.Guangdong Kenflo Pump Co., Ltd.

·· 25



Meeting Room:Hui Jian Hall Chairman: Zhi-gang Zuo

Time

16:00-16:20

16:20-16:40

16:40-17:00

17:00-17:20

17:20-17:40

17:40-18:00

18:00-18:20

No./ Title

2020101024

Data reduction procedure for two-phase flow perfor-

mance analysis in centrifugal pumps

202004837

Research the influence of hydraulic model on vibra-

tion of pump

201912682

Analysis of image filling of impeller blade region in

piv particle image in centrifugal pump

201909529

Numerical study on internal flow characteristics of a

semi- open centrifugal impeller with splitter blades

under off-design conditions

201912737

Numerical study on hydrodynamic characteristics in

a centrifugal pump at low flow rate based on cycling-

system model

202010999

Effects of openings of guide vane and different flow

rates on flow characteristics in pump mode of pump-

turbine with splitter blades

202009956

The effect of V- shaped cutting of blade outlet edge

on the noise of centrifugal pump

Author/Affiliation

Ya-guang Heng1;Qiao-rui Si1;Wei-bin Zhang1;

Gérard Bois2;Qi-feng Jiang1

1.Key Laboratory of Fluid and Power Machinery,Xihua Uni-

versity；

2.National Research Center of Pumps, Jiangsu University

Feng Zhao;He Li;Duo Liu;Tian-long Cui

1.Shenyang Blower Works Group Co., Ltd.;

2.School of Mechanical Engineering and Automation, North-

eastern University

Xiao-dong Liu;Zhu-qing Liu;Qiang Zhong;Yao-jun Li;

Wei Yang;Zhi-fengYao

College of Water Resources & Civil Engineering, China Agri-

cultural University

Yong-shun Zeng1;Xiao-lin Hao2;Zhi-feng Yao1，3;

Fu-jun Wang1，3;Min Yang2

1.College of Water Resources & Civil Engineering, China Agri-

cultural University;

2.Beijing Aerospace Petrochemical Technology and Equip-

ment Engineering Corporation;

3.Beijing Engineering Research Center of Safety and Energy

Saving Technology for Water Supply Network System

Wen-hui Yin;Xi Wang;Tao Yu;Jie Jian;

Xiang-yuan Zhang;Chen-xing Jiang;Zhi-jun Shuai;

Wan-you Li

College of Power and Energy Engineering, Harbin Engineer-

ing University

Jin- feng Zhang1;Ya- jing Xiao1;Shi- bin Jin2;Hai- kun

Cai1;Hai-qin Song1

1.Jiangsu University;

2.Institute of Quality Supervision and Inspection

Tian-peng Li;Xiao-rui Cheng

LanZhou University of Technology, College of Energy and

Power Engineering;

Key Laboratory of Fluid machinery and Systems

·· 26


1th Nov OPERATIONAL MAINTENANCE AND REPAIR Chinese Session

Meeting Room:Mei Ling Hall Chairman: Hao Sun Da-wei Sun

Time

14:00-14:40

14:40-15:00

15:00-15:20

15:20-15:40

15:40-16:00

No./ Title


Technical characteristics and evolution of H- class

advanced industrial gas turbine

☆ （Invited Talk）

Operation and maintenance of 9E gas turbine power

plant


Status evaluation and troubleshoot of rotating ma-

chinery based on vibration signal

201912716

Automatic recognition method of shaft orbit based

on deep learning

Coffee Break

Author/Affiliation

Gang Han

Suzhou Advanced Integrated Mechanical Solutions

Xiao-xiang Feng

Golden Concord Holdings Limited

Min-gang Cheng

Jiangsu Xindaoge Automatic Control Solutions Co.,Ltd.

Fu-min Wang;Xiao-mo Jiang;Sheng-li Xu;

Hai-xin Zhao;Yun-qing Gong

Dalian University of Technology;

Shenyang Blower Group Co., Ltd.

16:00-16:20

16:20-16:40

16:40-17:00

17:00-17:20

17:20-17:40

17:40-18:00

202001776

Design and validation of the simulation system of

gas turbine for low heating value syngas

201909522

The root cause analysis and solution for aluminium

blade corrosion

201912734

Bayes- LSTM approach to system identification of

rotating machinery

201912730

Research on deep peak shaving adaptation retrofit of

single-row forced draft fan for a 350MW coal-fired

unit

201912714

Kernel density estimation based bayesian method

for fault identification of rotating machinery

202009934

Reason analysis and solution to rubbing viberation

of import steam turbine

Bo Zhang;Yan-fei Mu;Xin-ming Chen;Shu Yan; Shao-

ping Shi

State Key Laboratory of Coal- Based Clean Energy (Huaneng

Clean Energy Research Institute

Da-jiang Li

Howden Hua Engineering Co.，Ltd.

Lin Lin1;Xiao- mo Jiang1;Sheng- li Xu1;Fu- min Wang1;

Yun-Qing Gong2

1.Dalian University of Technology; 2.Shenyang Blower Works

Group Monitoring and Control Co., Ltd.

Hong Yan1;De-sheng Chen1;Jin Zheng1;Bo Yang2

1.Xi’an Thermal Power Research Institute Co., Ltd. ;

2.Chinalco Ningxia Energy Group Liupanshan Thermal Power

Plant

Hai- xin Zhao1;Xiao- mo Jiang1;Sheng- li Xu1;Lin Lin1;

Yun-qing Gong2

1.Dalian University of Technology;

2.Shenyang Blower Group Co., Ltd.

Xi-De Zhang1;Abudurehemu.tuohuti1;Zi-long Wang1;

Kai-fa Wang2;De-liao Yang1;Yu Hu1

1.China Petroleum Tarim Petrochemical Company；

2.China Petroleum Tarim Oilfield Company

·· 27


1th Nov AERODYNAMIC DESIGN AND OPTIMIZATION: COMPRESSORS Chinese Session

Meeting Room:Dong Shan Hall Chairman: Tong Wang

Time

14:00-14:20

14:20-14:40

14:40-15:00

15:00-15:20

15:20-15:40

15:40-16:00

No./ Title

202004848

Stall flow field analysis of centrifugal compressor

vaned diffuser based on DMD

202009945

Research on the effect of blended blade tip and wing-

let on aerodynamic performance of a axial fan

201912695

Steady and unsteady analysis of tip-leakage vortex

202001766

Research on axial thrust calculation method of

shrouded impeller in centrifugal compressor

201912671

Study on the influence of dynamic/static interfer-

ence on the integrated stationary blade of multistage

centrifugal compressor

Coffee Break

Author/Affiliation

Zheng Guo1;Sheng-li Xu1;Ming-zhou Wang1;

Ji-gang Meng2;Qiang Zhao2


of Technology ;


Chun Zhang1;Ling Zhou2;Jing-bo Tan2;Lu-cheng Ji1

1.School of Aerospace Engineering, Beijing Institute of Tech-

nology;

2.Institute for Aero Engine, Tsinghua University

Wei Tan;Zi- qing Zhang;Xiao Qu;Ying- jie Zhang; Xin-

gen Lu;Yan-feng Zhang

Laboratory of Light-duty Gas-turbine, Institute of Engineering

Thermophysics；

University of Chinese Academy of Science

Fu-an Lu;Ji-qiong Ren;Yu-ying Sun;Wei-nan Jin;

Qiang Zhao;Yue-kun Qu


Chun-yang Li;Chun-jun Ji;Ling-xuan Du;Jun-yi Fang


·· 28


16:00-16:20

16:20-16:40

16:40-17:00

17:00-17:20

17:20-17:40

17:40-18:00

202009944

Research on influence of circumferential groove cas-

ing treatment on aerodynamic performance of cas-

cade

201909603

Numerical study of the structural parameters and in-

let Reynolds effect on the performance of honey-

comb

202009912

Structure and aerodynamic optimization design of ro-

tatable blade nozzle of turbine

201909597

Multi-objective optimization design method for tur-

bocharger compressor

201909575

Influence of trailing edge thickening on aerodynam-

ic performance of compressor cascade

202001785

The accuracy analysis of unsteady numerical simula-

tion on the compressor models

Jing-bo Tan1;Ling Zhou1;Chun Zhang1;Lu-cheng Ji2

1.School of Aerospace Engineering,Beijing Institute of Tech-

nology;

2.Institute for Aero Engine, Tsinghua University

Yu-ying Sun;Sheng-min Wang;Fu-an Lu;Yun Li


Wen-hui Ji;Zhi-wei Shao;Ying Wang

Hadian National Engineering Research Center- Power Equip-

ment Company Ltd.

Gang Chen;Jian- fei Yan;Bi- sheng Sun;Ai- guo Zhu;

Zhuo-pei Zhang

Tianjin North Tianli Turbocharging Technology Co.，Ltd。

Jun Ding;Xiao- peng Xin;Hong- ze Wang;Yong- feng

Sui;Hong- wei Zhang;Ji- bing Lan;Jian- sheng Zheng;

Yao Tu;Qun Zheng

Hangzhou Steam Turbine Co., Ltd.;

College of Power and Energy Engineering, Harbin Engineer-

ing University;

Hangzhou Turbine Power Group Co., Ltd.;

Zhejiang Rancon Turbine Machinery Co.,Ltd.;

Yang Wang;Wen-li Yi;Xiao Guan

Shen Yang Blower Works Group Corporation

1th Nov AERODYNAMIC DESIGN AND OPTIMIZATION: COMPRESSORS Chinese Session

Meeting Room:Dong Shan Hall Chairman: Zhi-heng Wang

Time No./ Title Author/Affiliation

·· 29


2nd Nov KEYNOTE LECTURES English Session

Meeting Room:Jia Hua ballroom Chairman: Hong-wei Ma

Time

8:30-9:10

9:10-9:50

9:50-10:20

10:20-11:00

11:00-11:40

No./ Title


Compressor design with highly variable fluid proper-

ties near the critical point and liquid


Use of conversion equations of influence coeffi-

cients on two-plane balancing

Coffee Break


Advances in the design and performance of vaned

diffusers for centrifugal compressors


Operating range limitations in high speed compres-

sors - aerodynamic, acoustic coupling and vibrations

at low mass flow rate

Author/Affiliation

Mark R.Anderson

Concepts NREC，US

John J. Yu;Nicolas Peton

Bently Nevada, Baker Hughes, a GE company，US

Stephen Spence

Department of Mechanical, Manufacturing and Biomedical En-

gineering Trinity College Dublin, Ireland,，UK

Xavier Ottavy

Fluid Mechanics and Acoustics Laboratory（Ecole Centrale de

Lyon）,France

·· 30


2nd Nov AEROELASTIC,SURGE AND STALL English Session

Meeting Room:Hui Jian Hall Chairman: Guo-liang Qin

Time

8:30-9:10

9:10-9:30

9:30-9:50

9:50-10:20

10:20-10:40

10:40-11:00

11:00-11:20

11:20-11:40

No./ Title


Study of compressor stall margin enhancement us-

ing tip air injection

202001756

Flow field analysis of surge in a vaneless diffuser

centrifugal compressor by numerical simulation with

plenum model

201912707

Simulation of non-synchronous blade vibration exci-

tation of a FLE fan

Coffee Break

201910624

Numerical investigation of the effect of geometric

mistuning on compressor aerodynamic performance

202001777

A study of stall condition of a multi-stage axial

compressor based on CFD and experimental meth-

ods

202006879

Bifurcation characteristics of airfoil- NESs cou-

pling system

201912697

Performance and stall process of the boundary lay-

er ingesting fan

Author/Affiliation

Hong Yan;Jie Xu


Cheng Jia1;Guo-liang Qin1;Yi Wang1,2;Qin Cui1

1.Xi'an Jiaotong University；


Qing-zhe Gao;Yun Zheng;Xiu-bo Jin;Kang Xu

School of Energy and Power Engineering, Beihang University;

Collaborate Innovation Center for Advance Aero-Engine

Dong-ming Cao;Ding-xi Wang;Xiu-quan Huang


Rui Wang1;Hai-lun Wang1;Shuo Jiang1,2;Jia-jian Tan1;

Hong-kun Li1;Ji-qiong Ren1


2.School of Mechanical Engineering, Dalian University of

Technology

Wen- fan Zhang;Gen- biao Zhou;Ya- feng Zhou;Lei

Wang;Jia-zhong Zhang

Xi’an ShaanGu Power Co., Ltd;

School of Energy and Power Engineering, Xi'an Jiaotong

University

Wen-qiang Zhang;Mehdi Vahdati

Imperial College London,UK

·· 31


2nd Nov STRUCTURAL DESIGN：STRENGTH & VIBRATION Chinese Session

Meeting Room:Shang Qing Hall Chairman: Yun-dong Sha

Time

8:30-9:10

9:10-9:30

9:30-9:50

9:50-10:20

10:20-10:40

10:40-11:00

11:00-11:20

11:20-11:40

11:40-12:00

12:00-12:20

No./ Title


A Random Fatigue Strength Analysis and Verifica-

tion Method for Thin-walled Structures

202010972

Shaft configuration analysis of bottoming supercriti-

cal CO2 power unit at off-design conditions

202002807

Analysis of crack propagation of the rotor structural

component

Coffee Break

2020101013

Advanced design based on additive manufacturing

201912662

Experimental study on strength check of spreader

for engine packing case

201909579

Performance optimization based on topological

method of centrifugal compressor

202009923

The influence of key parameters of transient dy-

namics analysis on the accuracy of compressor

blades dynamic calculation

201909538

Numerical simulation of semi-open centrifugal im-

peller axial thrust and method to reduce the axial

thrust

202009901

Design, optimization and experiment research of

turbine impeller assembly for LWD

Author/Affiliation

Yun-dong Sha


Ti-Shun Zhang

SoftInWay

Guang-chen Jiao;Zhi-jie Li

CONSYS GROUP LIMITED

Xiao-dong Kou

PERA Corporation Ltd.

Zhi-shuai Yu;Zhen Tang;Shan Lin;Jia-chao Sun;

Jing Jin

AECC Shenyang Engine Research Institute

Jing Liu;Wen-hao Huo;Jian-bao Yuan;Hao Sun;

Chongqing General Industry (Group) Co., Ltd.

Ting Guo;Xiao Guan;Yue-fang Wang

Dalian Turbomachinery Technology Development Co.,Ltd.

Shenyang Blower Works Group;

Department of Engineering Mechanics, Dalian University of

Technology

Jun-yi Fang;Chun-jun Ji;Chun-yang Li;

Xue-wei Zhang;Qi Sun


Xiao-jiang Yao1;Shang Jie1;Li Yang2;Yan Chen2

1. China Oilfield Services Limited；

2. NUMECA（Beijing）Software Limited

·· 32


2nd Nov AIRCRAFT ENGINE English Session

Meeting Room:Yao Hu Hall Chairman: Li Zhou

Time

8:30-9:10

9:10-9:30

9:30-9:50

9:50-10:20

10:20-10:40

10:40-11:00

11:00-11:20

11:20-11:40

11:40-12:00

No./ Title


Discussion of aeroengine compressor design technol-

ogy development

202004847

The swirl distortion flow field simulation technolo-

gy based on S-shaped inlet

201912728

Acoustic mode identification of broadband noise in

the duct at the fan inlet

Coffee Break

201912721

Calculation and analysis of interaction flowfield

over tiltrotor aircraft in conversion mode

202005867

Design and flow rate improvement of a small aeroen-

gine turbine

202001753

Effect of hot streak- swirl on film cooling perfor-

mance of leading edge of guide vane

202002796

An improved design of a swirl distortion generator

202005870

Effects of inlet distortion on the aerodynamic losses

in a transonic axial- flow fan under different operat-

ing conditions

Author/Affiliation

Zhi-peng Cao

AECC Sichuan Gas Turbine Establishment

Jia-le Wang;Bang-qin Cheng;Lu-ning Feng;

Jun Li;Yao-ze Yao

Aeronautics Engineering College, Air Force Engineering Uni-

versity

Liang-feng Wang1;Wei-yang Qiao2

1.China Aerodynamics Research and Development Center,

2.School of Power and Energy, Northwestern Polytechnical

University

Huan Li;Xiao-jun Wu;Hong-yin Jia;Gui-yu Zhou;

Peng-cheng Cui;Bin Li

Computational Aerodynamics Institute, China Aerodynamics

Research and Development Center

Zhu-yu Jiang;Ming Qiu;Deng-wen Yang


Xiao Chen; Wei-lin Yi

Beijing University of Technology

Lu- ning Feng;Bang- qin Cheng;Jia- le Wang;Jun Li;

Xiao-wen Fei

Aeronautical Engineering College, Air Force Engineering Uni-

versity

Zhe Yang1;Hanan Lu1;Qiu-shi Li1,2

1. National Key Laboratory of Science and Technology on

Aero- Engine Aero- Thermodynamics, School of Energy and

Power Engineering;

2. Key Laboratory of Fluid and Power Machinery, Xihua Uni-

versity

·· 33


2nd Nov PUMPS AND HYDROTURBINES Chinese Session

Meeting Room:Dong Shan Hall Chairman: De-min Liu Chen-xing Jiang

Time

8:30-9:10

9:10-9:30

9:30-9:50

9:50-10:20

10:20-10:40

10:40-11:00

11:00-11:20

11:20-11:40

11:40-12:00

12:00-12:20

No./ Title


Research on key technology of pump turbine of su-

per head pumped storage

202010975

Research on Modeling Method of Rotordynamic

System for Multistage Condensate Pump

201912667

A Review on Hydrodynamic Damping Characteris-

tics of Hydraulic Machinery

Coffee Break

202001757

Multi- objective optimization design of impeller in

multiphase rotodynamic pump

202009930

Study on cutting law of multi-stage centrifugal

pump impeller

201912670

Analysis of influence of outlet angle of guide vane

on pump performance

202002792

The influence of symmetrical drainage hole on the

external characteristics of spiral axial flow gas- liq-

uid mixed transportation pump

202009935

Research on relative velocity field based on time se-

ries of particle images in centrifugal pump

202010995

Automatic optimization of vertical long- axis fire

pump overload based on particle swarm optimiza-

tion algorithm

Author/Affiliation

De-min Liu

Research & Development Center of Dongfang Electric Machin-

ery Co., (DFEM)Ltd.

Ji-gang Meng1;Bai-jun Qiu1;Zhon-hui Xiao1;

Zuo-wen Zhong2;Min Sun2


2.Shenyang Blower Works Group Nuclear Pump Co., Ltd.

Yong-shun Zeng1;zhi-feng Yao 1, 2;Fu-jun Wang1, 2;

Ruo-fu Xiao1, 2

1. College of Water Resources & Civil Engineering, China Ag-

ricultural University;

2. Beijing Engineering Research Center of Safety and Energy

Saving Technology for Water Supply Network System

Wen-wu Zhang;Bao-shan Zhu

Tsinghua University

Lei Liu1,2;Heng Zhang1;Li-jun Liu3

1.Department of Fluid Machinery and Engineering, School of

Energy and Power Engineering, Xi’an Jiaotong University；


3.Shenyang Industrial Pump Manufacturing Co., Ltd.

Chun-jun Ji ;Ling-xuan Du ;Chun-yang Li ;Mao Shi


Cheng-kun Yang

College of energy and power engineering, Lanzhou University

of technology

Xiao-dong Liu ;Zhu-qing Liu ;Qiang Zhong;

Fu-jun Wang

China Agricultural University

Jin-feng Zhang;Zhi-jun Yang;Liang-qing Lai2

Hai-qing Song;Cheng-ming Jing

Jiangsu University

·· 34


2nd Nov ROTORDYNAMIC AND BEARING English Session

Meeting Room:Boardroom Chairman: Zhi-gangli

Time

8:30-8:50

8:50-9:10

9:10-9:30

9:30-9:50

9:50-10:20

Chairman: Bao-gang Wen

10:20-10:40

10:40-11:00

11:00-11:20

11:20-11:40

No./ Title

201912698

Reliable operation of turbomachinery through bear-

ing upgrades

202009936

Analysis of cage slip in angular contact ball bearing

considering non-newtonian behavior of elastohydro-

dynamic lubrication

202009942

Research on structure characteristics of the helium-

lubricated spiral grooved thrust bearing for helium

turbine expander

202009932

Study on bearing stiffness and its evolution rule un-

der excessive preload

Coffee Break

202009943

Numerical analysis of the static characteristic of ori-

fice-type throttled aerostatic journal bearings

201909562

Torsional Vibration analysis and life accessment of

certain gas turbine generator unit shaft train

202010974

A comparative study on the numerical solution algo-

rithms of gas Reynolds equation

201912654

Experimental study on the performance of the gas

centrifugal seal with continuous injection and dis-

charge of sealing fluid

Author/Affiliation

Jongsoo Kim

Waukesha Bearings,USA

Bao-gang Wen;Mei-ling Wang;Xiang-he Yun;

Xu Zhang;Qing-kai Han

School of Mechanical Engineering and Automation, Dalian

Polytechnic University

Xiao-hua Zhang1,2;Chang-lei Ke1;Kong-rong Li1;

Nan Peng1;Li-qiang Liu1,2;Lian-you Xiong 1,2

1. Technical Institute of Physics and Chemistry, Chinese Acad-

emy of Sciences；

2. University of Chinese Academy of Sciences

Xiang-he Yun1;Ning Li1;Bao-gang Wen2; Qing-kai Han1

1.School of Mechanical Engineering, Dalian University of

Technology;

2.School of Mechanical Engineering and Automation, Dalian

Polytechnic University

Xiao-hua Zhang1,2;Chang-lei Ke1;Bin Dong1;

Nan Peng1;Li-qiang Liu1,2

1.Technical Institute of Physics and Chemistry, Chinese Acade-

my of Sciences;

2. University of Chinese Academy of Sciences

Pei-jiong Yu;Ming Che ;Zhe Deng;Ji-bing Lan ;

Yong-feng Sui;Zhi-yong Yan

Hangzhou Steam Turbine Co.，Ltd.；

Hangzhou Steam Turbine & Power Group Co.，Ltd.；

Yong-liang Wang;Yi Wang;Long-kai Zheng

Dalian Maritime University

Kun-yi Chen；Shuang-xi Li

College of Mechanical and Electrical Engineering，Beijing Uni-

versity of Chemical Technology

·· 35


2nd Nov SEAL TEHCNOLOGY Chinese Session

Meeting Room:Mei Ling Hall Chairman: Xu-dong Peng

Time

8:30-9:10

9:10-9:30

9:30-9:50

9:50-10:20

10:20-10:40

10:40-11:00

11:00-11:20

11:20-11:40

11:40-12:00

No./ Title


Thoughts of the independent development of dry gas

seals used in high-parameter turbo compressor

2020101006

Research and application of dry gas seal for super-

critical CO2 power generation project

201912704

Experimental study on the leakage performance of

the outward pumping gas film end face seal

Coffee Break

201907474

Numerical and experimental investigation on the

bristle contact deflections characteristics of brush

seals based on ALE algorithm

201912699

Experimental analysis of leakage characteristics of

high speed spiral seal

201912678

Numerical study on the influence of structural pa-

rameters of flexible wire brush seal on leakage char-

acteristics

201912677

Experimental study on leakage characteristics of

ring-lobe floating ring seal

201907475

Numerical and experimental study on adaptive con-

centric performance of floating seal

Author/Affiliation

Xu-dong Peng

Zhejiang University of Technology

Ze-ping Wang

Sinoseal Holding Co, Ltd

Xing-hua Liu;Shuang-xi Li;Hao-ran Liao;Qing-zhan Li

Research Center of Fluid Sealing Technology, Beijing Univer-

sity of Chemical Technology

Chen-yu Du;Dan Sun;Huan Zhao;Guo-chen Zhang


Xiao-zhu Chen;Rao Zheng;Shuang-xi Li;Xiang Zhao


Lian-xiang Sha;Shuang-xi Li;Rao Zheng;

Shan-yu Zhang;Yu-hu Ma


Xiang Zhao;Run-mei Ma;Shuang-xi Li; Jia-xing Wang;

Xiao-zhu Chen


Ping Wang;Dan Sun;Chen-Du Yu;Zhong-Jiao Ze;

Min Zhou


·· 36

Date post:	25-Dec-2021
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

Meeting Room:Wen Hua Ballroom

Documents