Date post: | 21-Dec-2015 |
Category: |
Documents |
View: | 218 times |
Download: | 1 times |
Isometric-view of the MEMS switch.
Fig. Top diagram depicts the switch in the open position; the gap between the gold contact and conduction path is approximately 1 µm. Bottom diagram depicts the switch in the closed position
Testing
Fig. Testing of the MEMS switch
MEMSswticharray
AMMETER
permanentmagnet
programmablevoltage source
PROBE STATION
Testing – (I-V Closed)
I-V on
0
5
10
15
20
25
0 5 10 15 20 25
voltage (V)
curre
nt (m
A)
20mA compliance
10mA compliance
Testing- (I-V open) I-V (OFF)
-1.50E-10
-1.00E-10
-5.00E-11
0.00E+00
5.00E-11
1.00E-10
1.50E-10
2.00E-10
0 2 4 6 8 10 12
Voltage (V)
Cur
rent
(A
)