MergedFile - Multico Equipment Services Sdn Bhd · and productivity of a Bobcat telescopic handler,...

T2250 Telescopic Handlers

1

2

3

T2250: the three-in-one special!

n Not your average machine

With the T2250, you get the capabilities

and productivity of a Bobcat telescopic

handler, skid-steer and articulated loader –

from one exceptionally versatile machine!

Loading tradition in a compact

package

Only 1.95 m high and 1.83 m wide, the

T2250 is as compact and manoeuvrable

as our skid-steer loaders, with the

capacity of a larger machine.

Versatility

Thanks to our Bob-Tach™ system, the

T2250 is compatible with most Bobcat

loader attachments.

Agile as an articulated loader

The 3 steering modes – front wheel,

4-wheel or crab-steer – let you go

anywhere.

With the optional boom fl oat,

the boom and attachment can

smoothly follow uneven surfaces.

And the panoramic view from the

cab off ers 360º visibility, for greater

safety and speed.

All the reach of a telescopic handler

• Lift and load: with the T2250, you can lift

2.2 tons up to 5.2 m high.

• How far do you want to go? With a 1 ton

load, the T2250 off ers a maximum reach of

3 metres.

2

148°

Compact telescopic loader

n Born to load

Not a compromise, but a combination. This machine

is equipped to tackle all your loading jobs…but with

greater reach and lifting height than any loader.

n Making fast work of tough jobs

The T2250's optimised 'Z' bar kinematics increases

bucket dumping and crowding angles, and improves

the bucket thrust when loading. Your overall operation

is quicker and the breakout force is optimised.

Standard, fully

proportional joystick

All movements are proportional and can be combined, thanks to our load sensing system.

Simultaneous two foot

drive

Keep 100% control when loading with one foot on the throttle and one foot on the inching pedal. The inching pedal slows forward movement without changing engine speed.

Combining comfort and effi ciency

n All the features you need

• Reinforced undercarriage for greater robustness

• Attachment Control Device (ACD) for joystick control

of certain attachments

• Creep mode is standard!

It enables low travel speed at high engine rpm, so

you always have suffi cient hydraulic fl ow to operate

attachments such as sweepers or feeding buckets.

n 360° visibility

For better productivity and safety

With the engine located on the side of the machine, the

T2250 off ers 360° visibility from the cab. This design also

ensures easier access for routine maintenance.

n Easy service and

greasing

• Ready access to all

key components

• No special tools

required.

The operator can drive the machine in creep mode while maintaining full engine speed.

1 2 3 4 5

6 7 8

9

1

2

3

4

5

6

7

8

9

n Flexibility

Our quick-attach systems let you switch attachments at

a moment’s notice.

Our manual solutions:

• Bob-Tach™

• Quick-Tach

Optional – change attachments without even leaving

your cab:

• Hydraulic Quick-Tach.

Versatile as a Bobcat loader

Pallet Forks Box Blade

Landscape Rake

Brushcat™ Rotary Cutter

Bale Spike

Trencher

Auger

Vibratory Roller

Snow Blade

Snow V-Blade

Scraper

Snowblower

Dozer Blade

Combination Bucket

Sweeper

Crane Jib

Extension Jib

Landplane

Angle Broom

Fork with Grapple

Tiller

Bale Squeeze Handler

Bucket with Grapple

Mower

Bobcat EMEA - Drève Richelle 167 - B-1410 Waterloo, Belgium

T2250

PerformanceLifting height (Bob-Tach™) 5230 mmLifting height (Quick-Tach) 5210 mmRated capacity 2200 kgCapacity at max. height 2200 kgCapacity at max. reach (Bob-Tach™) 1000 kgCapacity at max. reach (Quick-Tach) 950 kgMax. reach (Bob-Tach™) 3010 mmMax. reach (Quick-Tach) 3030 mmCrowding force 2100 daNWeightsWeight (unladen) 4695 kgTractionStandard tyres 14x17.5Low speed (forward/reverse) 7 km/hHigh speed (forward/reverse) 25 km/hDriving modes Direct drive / soft driveDrive SystemTransmission Hydrostatic with electronic regulationMain drive 2-speed hydrostatic motorEngineMake / Model KUBOTA / V3800-DI TurboFuel / Cooling Diesel / LiquidRated power (DIN 6271) at 2400 RPM 55.9 kW (75 HP)Maximum torque at 1600 RPM 274 NmNumber of cylinders 4Displacement 3.8 lHydraulic SystemPump type Gear pump with LS valveCombined pump capacity 85 l/minWorking pressure 240 barCycle TimeLift time - no load 4.7 sLower time - no load 6.5 sTelescope in time at max. reach - no load 4.2 sTelescope in time at max. height - no load 4.2 sTelescope out time at max. reach - no load 5.7 sTelescope out time at max. height - no load 5.8 sBrakesEngine braking HydrostaticParking and emergency brake Negative brake with hydraulic commandFluid CapacitiesAxles and reduction gears front / rear 8.9 / 5.6 lEngine oil 12 lFuel tank 91 lHydraulic reservoir (hydraulic / overall) 29 / 44 lStandard FeaturesAggravating Movements Arrester (AMA)Hydrostatic transmissionROPS/FOPS operator cabHeating, demisting and ventilationFront and rear washer/wipersSeat with self retracting seat belt

QuicktachFront and rear work lights on cabCreep function ( or SMS: Speed management system)

OptionsBack-up alarmAir conditioningRotating beaconRear hydraulic auxiliaryBoom lightSet of blue lights for hen housesCarriage with hydraulic attachment lockRoof window wiper

Protective grill for windscreenTransmission lock overrideFloat functionBob-Tach™Hydraulic line at boom end with ACDRear pin-type hitchBoom stop

Load ChartsWith forks and 14 x 17.5 tyres, with Bob-Tach™

12

50

kg

17

50

kg

22

00

kg

10

00

kg

15

00

kg

20

00

kg

3 2 1 0 m 147

6

54,994,82

4,52

4,064

3,35

3

2

1

0 m0,20

-1

7

6

5

5,25

4

3

0,5

2

0 m

-1

2,1

8

1,8

8

1,5

51

,36

1,0

1

0,2

7

3 2 1 0 m 14

3,0

1

2,7

52

,56

2,2

0

1,9

21

,71

1,5

6

1,0

6

Complies with stability test EN1459 Annex B.Dimensions

FE

I

JK

B

C

MLP

Q

P

Q

R

S

T

U

D

N

A

G

O

(A) 5330 mm(B) 4145 mm(C) 3984 mm(C) 4000 mm(D) 3585 mm(E) 2185 mm(F) 1985 mm

(G) 148°(I) 1553 mm(J) 430 mm(K) 294 mm

(M) 2300 mm(O) 860 mm(P) 1485 mm(Q) 1840 mm(R) 4280 mm(S) 3170 mm(T) — mm(U) 1500 mm

PerformanceLifting height (Bob-Tach™) 5230 mmLifting height (Quick-Tach) 5210 mmRated capacity 2200 kgCapacity at max. height 2200 kgCapacity at max. reach (Bob-Tach™) 1000 kgCapacity at max. reach (Quick-Tach) 950 kgMax. reach (Bob-Tach™) 3010 mmMax. reach (Quick-Tach) 3030 mmCrowding force 2100 daNWeightsWeight (unladen) 4695 kgTractionStandard tyres 14x17.5Low speed (forward/reverse) 7 km/hHigh speed (forward/reverse) 25 km/hDriving modes Direct drive / soft driveDrive SystemTransmission Hydrostatic with electronic regulationMain drive 2-speed hydrostatic motorEngineMake / Model KUBOTA / V3800-DI TurboFuel / Cooling Diesel / LiquidRated power (DIN 6271) at 2400 RPM 55.9 kW (75 HP)Maximum torque at 1600 RPM 274 NmNumber of cylinders 4Displacement 3.8 lHydraulic SystemPump type Gear pump with LS valveCombined pump capacity 85 l/minWorking pressure 240 barCycle TimeLift time - no load 4.7 sLower time - no load 6.5 sTelescope in time at max. reach - no load 4.2 sTelescope in time at max. height - no load 4.2 sTelescope out time at max. reach - no load 5.7 sTelescope out time at max. height - no load 5.8 sBrakesEngine braking HydrostaticParking and emergency brake Negative brake with hydraulic commandFluid CapacitiesAxles and reduction gears front / rear 8.9 / 5.6 lEngine oil 12 lFuel tank 91 lHydraulic reservoir (hydraulic / overall) 29 / 44 lStandard FeaturesAggravating Movements Arrester (AMA)Hydrostatic transmissionROPS/FOPS operator cabHeating, demisting and ventilationFront and rear washer/wipersSeat with self retracting seat belt

QuicktachFront and rear work lights on cabCreep function ( or SMS: Speed management system)

OptionsBack-up alarmAir conditioningRotating beaconRear hydraulic auxiliaryBoom lightSet of blue lights for hen housesCarriage with hydraulic attachment lockRoof window wiper

Protective grill for windscreenTransmission lock overrideFloat functionBob-Tach™Hydraulic line at boom end with ACDRear pin-type hitchBoom stop

Load ChartsWith forks and 14 x 17.5 tyres, with Bob-Tach™

12

50

kg

17

50

kg

22

00

kg

10

00

kg

15

00

kg

20

00

kg

3 2 1 0 m 147

6

54,994,82

4,52

4,064

3,35

3

2

1

0 m0,20

-1

7

6

5

5,25

4

3

0,5

2

0 m

-1

2,1

8

1,8

8

1,5

51

,36

1,0

1

0,2

7

3 2 1 0 m 14

3,0

1

2,7

52

,56

2,2

0

1,9

21

,71

1,5

6

1,0

6

Complies with stability test EN1459 Annex B.Dimensions

FE

I

JK

B

C

MLP

Q

P

Q

R

S

T

U

D

N

A

G

O

(A) 5330 mm(B) 4145 mm(C) 3984 mm(C) 4000 mm(D) 3585 mm(E) 2185 mm(F) 1985 mm

(G) 148°(I) 1553 mm(J) 430 mm(K) 294 mm

(M) 2300 mm(O) 860 mm(P) 1485 mm(Q) 1840 mm(R) 4280 mm(S) 3170 mm(T) — mm(U) 1500 mm

Spec

ifica

tion

s an

d d

esig

n ar

e su

bje

ct to

ch

ang

e w

ith

out n

otic

e. P

ictu

res

of B

obca

t pro

du

cts

may

sh

ow o

ther

than

sta

nd

ard

equi

pm

ent.

Specifications

©2009 Bobcat EMEA 4472580-EN (09-09)

PerformanceLifting height (Bob-Tach™) 5230 mm Lifting height (Quick-Tach) 5210 mm Rated capacity 2200 kg Capacity at max. height 2200 kg Capacity at max. reach (Bob-Tach™) 1000 kg Capacity at max. reach (Quick-Tach 950 kg Max. reach (Bob-Tach™) 3010 mm Max. reach (Quick-Tach) 3030 mm Crowding force 2100 daN

WeightsWeight (unladen) 4695 kg

TractionStandard tyres 14x17.5 Low speed (forward / reverse) 0–7 km/h High speed (forward / reverse) 0–25 km/h Driving modes Direct drive / soft drive

Drive SystemTransmission Hydrostatic with electronic regulation Main drive 2-speed hydrostatic motor

EngineMake / Model KUBOTA / V3800-DI Turbo Fuel / Cooling Diesel / Water-cooled Rated power (DIN 6271) at 2400 RPM 55.9 kW (75 HP) Maximum torque at 1600 RPM 274 Nm Number of cylinders 4 Displacement 3.8 l

Hydraulic SystemPump type Gear pump with LS valve Combined pump capacity 85 l/min Working pressure 240 bar

Cycle TimesLift time - no load 4.7 s Lower time - no load 6.5 s Telescope in time at max. reach - no load 4.2 s Telescope in time at max. height - no load 4.2 s Telescope out time at max. reach - no load 5.7 s Telescope out time at max. height - no load 5.8 s

BrakesEngine braking Hydrostatic Parking and emergency brake Negative brake with hydraulic command

Fluid CapacitiesAxles and reduction gears front / rear 8.9 / 5.6 l Engine oil 12 l Fuel tank 91 l Hydraulic reservoir (hydraulic / overall) 29 / 44 l

Standard FeaturesAggravating Movements Arrester (AMA) Quick-Tach Hydrostatic transmission Front and rear work lights on cab ROPS/FOPS operator cab Creep function (or SMS: Speed Management System) Heating, demisting and ventilation Front and rear washer/wipers Seat with self retracting seat belt

OptionsBack-up alarm Protective grill for windscreen Air conditioning Transmission lock override Rotating beacon Float function Rear hydraulic auxiliary Bob-Tach™ Boom light Hydraulic line at boom end with ACD Set of blue lights for hen houses Hydraulic line at boom end with ACD Carriage with hydraulic attachment lock Boom stop Roof window wiper

Dimensions

Load Charts

With forks and 14 x 17.5 tyres, with Bob-Tach™

Complies with stability test EN1459 Annex B.

TL470 | Telescopic Handlers

PerformanceLifting height 6957.0 mmRated capacity 3500 kgCapacity (at max. height) 3000 kgCapacity (at max. reach) 1500 kgMax. reach 4002.0 mmCrowding force 6200 daN


TractionStandard tyres Standard 405/70x201st gear / low range (40 km/h option) 6 (6) km/h1st gear / high range (40 km/h option) 11 (12) km/h2nd gear / low range (40 km/h option) 16 (18) km/h2nd gear / high range (40 km/h option) 30 (40) km/h

Drive SystemMain drive Hydrostatic motor with 2 speed gearboxTransmission Hydrostatic with electronic regulation

EngineMake / Model PERKINS / 1104D-44TAFuel DieselCooling LiquidRated power (DIN 6271) at 2200 RPM 74.5 kWMaximum torque at 1400 RPM 410.0 NmNumber of cylinders 4Displacement 4.40 L

Hydraulic SystemPump type Gear pump with LS valveCombined pump capacity 100.00 L/min

Cycle TimesLift time - no load 8.0 sLower time - no load 6.0 sTelescope in time at max. reach - no load 6.7 sTelescope in time at max. height - no load 6.7 sTelescope out time at max. reach - no load 7.1 sTelescope out time at max. height - no load 7.1 s

BrakesEngine braking HydrostaticParking and emergency brake Negative brake with hydraulic command

Fluid CapacitiesAxles and reduction gears front / rear 9.1/9.1 LEngine oil 8.50 LFuel tank 138.00 LHydraulic reservoir 59.00 L

Standard FeaturesAggravating Movements Arrester (AMA)Hydrostatic transmissionROPS/FOPS operator cabHeating, demisting and ventilationFront and rear washer/wipersSuspension seatRoad lightsTurn signalsRight and left side mirrors

Two way hydraulic supply at the end of the boomMudguardsTurbo-charged engineNarrow hook-up for mounting of the equipmentMechanical lock of the equipmentJoystick with forward/reverse controlTransmission lock overrideWork lights on top of the cabStandard 405/70x20 tyres

OptionsAir conditioningAuxiliary line on boom witch ACD and electric connectorsBack-up alarmBasic tow hitchBlue lights for henhousesBoom lightBoom stopBoom suspensionCatalytic purifier mufflerCold startCustom colourCyclonic air prefilterDouble right rear view mirrorDrawbar coupler tow hitchFire extinguisherFront tow hitchGrammer air suspension seatHydraulically adjustable tow hook

Lockable fuel capManitou carriage with hydraulic attachment lockManually adjustable drawbar coupler tow hitchNo forward/reverse control on joystickPintle tow hitchProportional engine fan with inverterProtective grill for windshieldQuicktach carriage with hydraulic attachment lockRear auxiliary lineRear auxiliary line with hydraulically adjustable tow hookRear electric auxiliarySafety hammerSears air suspension seatSupport for vehicle registration plate with rear hydraulic hitchSupport for vehicle registration plate without rear hydraulic hitchTool boxTransmission 40 km/hWheel wedge

EnvironmentalLevel of acoustic power (LWA) 106 dB(A)

Load ChartsWith forks and standard 405/70x20 tyres

5

15

00

20

00

30

00

35

00

25

00

-1

0 m

1

2

3

4

5

6

7

8

-1

0 m

2

3

4

5

6

76,95

8

4 3 2 1 0 m -1

5 4 3 2 1 0 m -1

Complies with stability test EN1459 annex B

Dimensions

M

A

B

D

IF

J

R

U

S

P

Q

C

E

G

(-) 900.0 mm(A) 6074.0 mm(B) 4869.0 mm(C) 4763.0 mm(D) 4145.0 mm(E) 2561.0 mm(F) 2374.0 mm(G) 135°(I) 1752.0 mm(J) 430.0 mm

(L) 1356.0 mm(M) 2870.0 mm(N) 643.0 mm(O) 1013.0 mm(P) 1895.0 mm(Q) 2300.0 mm(R) 5015.0 mm(S) 3714.0 mm(U) 1092.0 mm

TL470 | Specifications

©2012 BOBCAT B 4473980-EN (03-12)

Spec

ific

atio

ns a

nd

des

ign

are

sub

ject

to c

han

ge

wit

hou

t not

ice.

Pic

ture

s of

Bob

cat p

rod

uct

s m

ay s

how

oth

er th

an s

tan

dar

d eq

uip

men

t.

www.bobcat.eu

T40140 T40180 STAGE IIIATELESCOPIC HANDLERS

2

HIGHER – STRONGER – BETTER…

The new 14m and 18m Bobcat® telescopic handlers provide you with what matters most – ease-of-use, safety and performance. Simplicity in design make these telescopic handlers easy to use. State-of-the-art safety systems and class-leading performance give you 100% confidence in the machine. The T40140 and T40180 work with the best possible efficiency and productivity, with a constant focus on safe operation.

Optimum Safety

Unique integrated frame-levelling and

side-shift system for use on both tyres

and stabilizers.

Full flexibility

A complete set of attachments provides

full flexibility and job compatibility.

Maximum uptime

Side-mounted engine

and easy-to- access

maintenance points

for fast service and

maintenance.

3

Total visibility

Rounded cab design

features large front

and rear windows to

maximise all-round

visibility.

Ergonomic comfort

Logically designed and positioned

controls provide greater comfort, control

and productivity.

Higher reach

Minimal loss of lift height between

operating on tyres and on stabilizers.

Compact stability

Compact stabilizers ensure full

capabilities can be used in even the

most confined areas.

4

An easy-to-use machine means better performance, higher productivity and, ultimately, safer operation. The T40140 and T40180 are models of simplicity, with a wide range of features.

SIMPLICITY

Ergonomics

The ergonomic controls are within arm’s

reach, providing an extra level of safety and

operational control.

• FNR control button on the joystick

• Electronic dashboard

• Adjustable steering wheel

• Integrated airflow solution

FNR on Joystick puts maximum control at your fingertips. Select

the driving direction at the touch of a button, while still keeping

a grip on both the steering wheel and the joystick for improved

safety and productivity.

Information at your fingertips

• Continuous frame-levelling angle on LCD display - when

levelling function is activated, the LCD screen automatically

shows the angle to keep you fully aware of machine

parameters.

• Boom angle value available on the LCD screen promotes

precision movements and faster work-cycles for repetitive tasks.

• Semi-automatic wheel alignment helps make sure the wheels

are always aligned when you change between the 3 steering

modes.

• Aux flow control is easily and precisely controlled from the

joystick.

• Stabilizer detection on ground - sensor continuously monitors

the pressure to prevent drops/leaks and ensure safe stab usage

at all times.

5

Spacious environment

The new cab is designed with the operator in mind. Providing an exceptional level of comfort to keep you more alert

and improve the safety of the work site.

Total visibility

The rounded cab design features a large front window to

maximise visibility of the attachment – at any height or reach.

Large rear window ensures maximum rear visibility, increasing

your spatial awareness and the accuracy of rear movements.

The design of the protective roof grid provides maximum

protection while ensuring that the attachment is visible at full

height.

6

CONFIDENCE… IN YOUR BOBCAT TELEHANDLERAttention to details … improving Quality, Reliability & DurabilityThe new T40140 and T40180 models provide a new level of confidence…in the machine’s performance and safety,

and in its robustness. This is achieved by applying the rigorous Bobcat® development standards across all functions

on the new models.

• New generation cooling package ensures smooth and stable

control of the hydraulic oil temperature and hydraulic hose life

optimisation.

• Complete protection of the tilt cylinder within the boom head

ensures minimum risk of damage and increased operator

safety.

• Integrated boom head design provides reinforcement to

handle heavy lifting while also providing added peace-of-mind

when operating from a man platform.

• New generation wear pads, larger bolts, larger steel inserts to

benefit from increased friction coefficient.

• Safe and smooth management of over-speed to ensure

maximum durability and uptime.

7

Safety

The load management system on the new

T40140 and T40180 ensures safe operation

at all times – regardless of the load.

The display – positioned for maximum

visibility – provides continuous clear

information on load management.

Side Shift

Unique integrated frame-levelling and side-

shift system works independent

of the main frame to provide ± 4° bank-

angle on tyres and up to ± 12° angle on

stabilizers. The system ensures maximum

flexibility and up to ± 700 mm side shift at

full extension.

8

PERFORMANCE… HOW TO MAKE THE GOOD EVEN BETTER!Compactness = access

Easy-to-use compact stabilizers ensure that

the T40180’s full capabilities can be used in

the most confined working areas.

3 steering modes provide a solution for any

movement.

You can easily manoeuvre into hard-to-

reach areas with the short turning radius.

9

Reaching higher than ever - both on tires

and on stabilizers.

We believe a high-reach machine should

not have limitations! The

T40180 provides top-class stability, ensuring

minimal loss of lift height and capacity

when operating on tires

With a top speed of 30 km/h, the new

models can quickly move between

locations, reducing travel times.

10

ENGINE

Maintenance

Improved serviceability: active monitoring of machine systems, with real-time information provided for diagnostics.

• Battery located in engine basket for easy access. Electric switch ensures that the battery is not accidentally left

connected overnight

11

T40140 T40180 — SPECIFICATIONS

T40180 3B TelescopicsSpecifications

B33G 11001 — B33G 99999 • 2013-10-21 • ©2013 Bobcat EMEA - www.bobcat.euSpecifications are subject to change without notice - Pictures of Bobcat units may show other than standard equipment

PerformanceLifting height — on stabilisers 17500.0 mmLifting height — on tyres 16200.0 mmRated capacity 4000 kgCapacity (at max. height on stabilisers) 2500 kgCapacity (at max. height on tyres) 1000 kgCapacity (at max. reach on stabilisers) 560 kgCapacity (at max. reach on tyres) 0 kgMax. reach on stabilisers 13700.0 mmMax. reach on tyres 12800.0 mmCrowding force 4900 daN


TractionStandard tyres 400/80x24Low speed (forward/reverse) 8.5 km/hHigh speed (forward/reverse) 30.0 km/hDriving modes Direct drive / soft drive

Drive SystemMain drive Hydrostatic motorTransmission Hydrostatic with electronic regulation

EngineMake / Model DEUTZ / TCD 3.6 L4Fuel DieselCooling LiquidRated power (ISO 14396) at 2300 RPM 74.4 kWMaximum torque at 1600 RPM 410.0 NmNumber of cylinders 4Displacement 3.62 L




Fluid CapacitiesAxles and reduction gears front / rear 9.1/9.1 LFuel tank 145.00 LHydraulic reservoir [HYDRAULIC] 76.00 L

Standard FeaturesAggravating Movements Arrester (AMA)Hydrostatic transmissionROPS/FOPS operator cabHeating, demisting and ventilationFront and rear washer/wipersSuspension seatRoad lightsTurn signals

Right and left side mirrorsTwo way hydraulic supply at the end of the boomMudguardsTurbo-charged engine - Perkins Stage 3ANarrow hook-up for mounting of the equipmentMechanical lock of the equipmentFour 400/80x24 tyresTransmission lock override

EnvironmentalSound pressure level (LpA) 79 dB(A)Level of acoustic power (LWA) 106 dB(A)Whole body vibration (ISO 2631–1) 0.29 ms-2

Load ChartsWith forks and standard 400/80x24 tyres, on stabilisers

Complies with stability test EN1459 Ennex B

Dimensions

(-) 16°(-) 109°(A) 7425.0 mm(B) 6164.0 mm(E) 2670.0 mm(F) 2476.0 mm(G) 124°(J) 500.0 mm

(M) 2850.0 mm(O) 930.0 mm(P) 1992.0 mm(Q) 2394.0 mm(R) 5822.0 mm(S) 3782.0 mm(U) 1761.0 mm

OptionsAir conditioningAir suspension seatAuxiliary line on boomwitch ACD and electricconnectorsBack up alarmBasic tow hitchBoom stopCarriage with hydraulicattachment lockCold startCustom colourCyclonic air prefilterDouble right rear viewmirrorDrawbar coupler tow hitchFan inverterFire extinguisherLockable fuel cap

Man platform predispositionMultifunctional remotecontrolNo forward/reverse controlon joystickPintle tow hitchRadio readyRear flat mirrorRoof window wiperRotating beaconSun visorSupport for registrationplateWindscreen grillWork light on boomWheel wedgeWinch ready


B33H 11001 — B33H 99999 • 2013-10-21 • ©2013 Bobcat EMEA - www.bobcat.euSpecifications are subject to change without notice - Pictures of Bobcat units may show other than standard equipment









Fluid CapacitiesAxles and reduction gears front / rear 9.1/9.1 LEngine oil 8.00 LFuel tank 145.00 LHydraulic reservoir [HYDRAULIC] 76.00 L






Dimensions



OptionsAir conditioningAir suspension seatAuxiliary line on boomwitch ACD and electricconnectorsBack up alarmBasic tow hitchBoom stopCarriage with hydraulicattachment lockCold startCustom colourCyclonic air prefilterDrawbar coupler tow hitchFan inverterFire extinguisherLockable fuel capMan platform predisposition

Multifunctional remotecontrolNo forward/reverse controlon joystickPintle tow hitchRadio readyRear electric auxiliaryRear flat mirrorRoof window wiperRotating beaconSun visorSupport for registrationplateWindscreen grillWork light on boomWheel wedgeWinch ready

PERFORMANCEMaximum Lift Capacity kg 4100 4000

Maximum Lift Height (on tyres / on stabilizers) mm 13300 / 13600 16200 / 17500

Maximum Forward Reach (on tyres / on stabilizers) mm 9800 / 9800 12800 / 13700

Lift Capacity at Full Height (on tyres / on stabilizers) kg 2500 / 4000 1000 / 2500

Lift Capacity at Full Reach (on tyres / on stabilizers) kg 500 / 1300 0 / 560

Tilt Crowding Force daN 12300

WEIGHTSWeight (unladen) kg 10290 10790

ENGINEStage IIIA

Make / Model PERKINS / 1104D-44TA

Fuel / Cooling DIESEL / Water

Rated Power (ISO 14396) at 2300 RPM kW 74.5 (100)

Maximum Torque at 1600 RPM Nm 410

Number of Cylinders 4

Displacement l 4.4

TRACTIONStandard Tyres Basic Option Tyres 400/80-24"

Low Speed (forward / reverse) km/h 8.5

High Speed (forward / reverse) km/h 30

Driving Modes 2WS / 4WS / CRAB

DRIVE SYSTEM

Transmission Hydrostatic with electronic regulation

Main Drive Hydrostatic motor

HYDRAULIC SYSTEMPump Type Gear pump with LS valve

Combined Pump Capacity l/min 100

Working Pressure bar 255

BRAKESService Brake Oil immersed discs

Parking and Emergency Brake Negative brake with hydraulic command

DIMENSIONS


B33G 11001 — B33G 99999 • 2013-10-21 • ©2013 Bobcat EMEA - www.bobcat.euSpecifications are subject to change without notice - Pictures of Bobcat units may show other than standard equipment









Fluid CapacitiesAxles and reduction gears front / rear 9.1/9.1 LFuel tank 145.00 LHydraulic reservoir [HYDRAULIC] 76.00 L






Dimensions



OptionsAir conditioningAir suspension seatAuxiliary line on boomwitch ACD and electricconnectorsBack up alarmBasic tow hitchBoom stopCarriage with hydraulicattachment lockCold startCustom colourCyclonic air prefilterDouble right rear viewmirrorDrawbar coupler tow hitchFan inverterFire extinguisherLockable fuel cap

Man platform predispositionMultifunctional remotecontrolNo forward/reverse controlon joystickPintle tow hitchRadio readyRear flat mirrorRoof window wiperRotating beaconSun visorSupport for registrationplateWindscreen grillWork light on boomWheel wedgeWinch ready

(A) 7313.0 mm(B) 6052.0 mm(E) 2670.0 mm(F) 2476.0 mm

(G) 124°(J) 500.0 mm

(M) 2850.0 mm(O) 930.0 mm

(P) 1992.0 mm(Q) 2394.0 mm(R) 5720.0 mm(S) 3782.0 mm(U) 1761.0 mm

(A) 7425.0 mm(B) 6164.0 mm(E) 2670.0 mm(F) 2476.0 mm

(G) 124°(J) 500.0 mm

(M) 2850.0 mm(O) 930.0 mm

(P) 1992.0 mm(Q) 2394.0 mm(R) 5822.0 mm(S) 3782.0 mm(U) 1761.0 mm

DI CE - Drève Richelle 167 - B-1410 Waterloo, Belgium

Spec

ifica

tions

and

des

ign

are

subj

ect t

o ch

ange

with

out n

otic

e. P

ictu

res

of B

obca

t pro

duct

s m

ay s

how

oth

er th

an s

tand

ard

equi

pmen

t.

©2013 BOBCAT B4474500-EN (11-13)

T40140 T40180 — SPECIFICATIONS

OPTIONS T40140 T40180Air conditioning x x

Air suspension seat x x

Auxiliary line on boom with ACD and electric connectors x x

Back-Up alarm x x

Basic tow hitch x x

Boom light x x

Boom stop x x

Carriage with hydraulic attachment lock x x

Cold start x x

Cyclonic air prefilter x x

Document holder (PVC) x x

Drawbar coupler tow hitch x x

Fan inverter x x

Fire extinguisher x x

Forward/Reverse control on steering wheel lever x x

Lockable fuel cap x x

Manplatform Installation x x

Michelin tyres - set of 4 x 400/80-24" x x

Multifunctional remote control x x

Custom colour x x

Pintle tow hitch x x

Protective grill for windshield x x

Protective zinc coat x x

Radio ready x x

Rear electric auxiliary x x

Rear flat mirror x x

Roof window wiper x x

Rotating beacon x x

Sun visor x x

Support for vehicle registration plate x x

Wheel wedge x x

Winch Installation x x

ATTACHMENTS T40140 T40180 Digging Bucket w/o teeth x x

Digging Bucket w/ teeth x x

Concrete Bucket, hydraulic x x

Concrete Bucket, mechanic x x

Rigid Pallet Forks Frame x x

Rigid Pallet Forks Frame w/Backrest x x

Floating Pallet Forks, 1,12m wide x x

Floating Pallet Forks, 1,44m wide x x

Jib 4.1t, 0.7m x x

Jib 0.7t , 3.7m x x

Winch 4.1t x x

Winch w/ Jib 600 kg x x

Winch w/ Jib 1000 kg x x

Man Platform, extendable, rotatable, 4m x x

Man Platform , fixed, 1m x x

Date post:	29-Apr-2018
Category:	Documents
Upload:	hoangliem
View:	216 times
Download:	1 times

MergedFile - Multico Equipment Services Sdn Bhd · and productivity of a Bobcat telescopic handler,...

Documents