ClassicClassic™ Product Line Spec Book©2015 Masco Cabinetry LLC. Printed in the USA (203213) R 5/15
Merillat.com
Merillat C
lassic® Product Line S
pec Book
2015
2015
Our cornerstone product line.
Thanks to a certainbuilt-in ‘can do’ spirit, I found several simpler ways to improve theart of cabinetmaking.
—Orville Merillat
341 2"
11 2"
57"
15"
93"
3"24"24" 21"21"
3"96"
108"
Looking for Merillat Classic® sales support? These resources can help.
©2013 Masco Cabinetry LLC. Merillat Classic® 6/13. Legal:#178805
Masco Cabinetry LLC warrants to the original consumer purchaser that our Merillat Classic® cabinetry will be free from defects in material and workmanship under normal use for a period of TWENTY-FIVE (25) YEARS from date of purchase. This warranty is not transferable. No changes or modifications can be made to this warranty except by an officer of Masco Cabinetry LLC.
Masco Cabinetry LLC may elect to repair or replace any defective Merillat Classic® product covered by our warranty.THIS WARRANTY DOES NOT COVER:
• The natural aging or darkening of wood color, or the inherent growth characteristics of, or variation, in wood. • Defects caused by misuse, abuse, negligence, alterations, environmental conditions, improper installation,
storage or handling.
As with other natural materials, wood is affected by environmental factors such as natural and artificial lighting. Darkening or mellowing of the wood can be expected and is a natural process of wood as it ages. Each wood species also exhibits its own distinctive patterns and characteristics that add to its natural beauty. These variations in color and characteristics are not considered imperfections or defects.
Masco Cabinetry LLC further provides a Lifetime Limited Warranty on the door hinges and drawer guides to the original consumer purchaser for as long as you own the product. This Lifetime Limited Warranty provides that the door hinges and drawer glides will be free from defects in material and workmanship under normal use. Replacement hinges and drawer glides are subject to their availability from our suppliers.
From time to time, we will change design, specifications and materials as conditions require and improvements are developed, but we have no obligation to incorporate such changes in products we previously manufactured.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF USE, OR LABOR EXPENSES IN UNINSTALLING OR INSTALLING ANY MATERIAL OR PARTS, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, TORT, OR ANY OTHER LEGAL THEORY, EVEN IF MASCO CABINETRY LLC HAS BEEN ADVISED OF THE POSSIBILITY THEREOF. MASCO CABINETRY LLC DISCLAIMS RESPONSIBILITY FOR DAMAGES IN EXCESS OF YOUR PURCHASE PRICE. Some provinces and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty is only valid in the United States of America and Canada. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and from province to province.
To obtain performance under this warranty, you must contact your Merillat Classic® supplier and report, in writing, all defects claimed and provide your original sales receipt or other documentation acceptable to Masco Cabinetry LLC. If you have difficulty obtaining assistance, write to: Merillat Classic® Warranty Department, Masco Cabinetry LLC, 4600 Arrowhead Drive, Ann Arbor, Michigan 48105 USA
For cabinetry purchased on or after January 5, 2009
Masco Cabinetry LLC 25 Year Limited Warranty.
Merillat.comThis consumer-facing website offers many ways to inspire organizational solutions in beautiful cabinetry options, as well as drive business to our dealers. Here are some highlights:
• View inspirational designs and photos.• Download floor plan drawings from photosets to gather design ideas.• Visualize door styles by wood species and finish.• Use the “Features & Accessories for Your Lifestyle” to view
organizational solutions by room type.• Engage consumers by directing them to the “Step-by-Step Kitchen
Planner” to create a mood board to share with their designer.• Educate consumers about wood characteristics, installation, Merillat
sustainability initiatives, and dos and don’ts of cabinetry care.
MerillatBusiness.comIf you’re not currently registered for MerillatBusiness.com, you could be missing important product and brand information that can assist you with your Merillat sales efforts. It’s quick and easy, so visit the site and register today. It will enable you to:
• Check order status.• Download or order product literature, like the product brochure,
specification and price books, door/style finish codes, and 20-20 Design updates. (For questions on 20-20 Design, email [email protected].)
• Download promotional materials, such as brand campaign print ads, direct mail postcards, videos and counter cards.
• Order samples and displays, like wood chips, selection centers, and sample doors and backer cards.
Automated Orders proCAB™proCAB™ is an online, web-based, real-time order management solution available for Merillat Cabinetry product lines. Sign up today if you don’t already have an account. Benefits of proCAB™ are:
• Order Entry and Inquiry• Import Kitchen Designs from 2020• No Charge Shortage and Damage Ordering• Quote Order Capabilities• Expedite Requests• Shipment Status Inquiry• Product Inquiry Search• Document Imaging to retrieve copies of acknowledgements, invoices,
and shipping reports• ACH electronic payment of your invoices• Outstanding Invoices• View open and paid invoices• View check number that paid a specific invoice and payment receipts
For more information, please contact us directly at(866) 628-1621 or [email protected]
Order Confirmation and TrackingYou can monitor your order using Merillat Business or proCAB. Simply login to review your confirmation that your order has been received and to also track its progress.
Merillat Classic® Cancellation PolicyMerillat Classic® cabinetry is made to order. That means we don’t start building your cabinets until your order is placed. Due to our fast 10-day shipping schedule, orders are fulfilled as quickly as possible, affecting our ability to accept cancellations. To consistently maintain the quick 10-day shipping schedule, our policy is that orders cannot be canceled once placed.
Merillat Customer Care ResourcesElectronic means are convenient, but sometimes you just need to talk to a person, and Merillat Customer Care consultants are here to help. Your consultant can help you:
• Order product.• Follow up on orders or track delivery progress.• Discuss product situations or address invoice questions.
Your Merillat® Account Manager is there to help you … every step of the way. Make sure to contact them whenever you have questions, concerns or need information.
Additional assistance is available through Customer Care:(855) 896-9803 or [email protected] M-F 8:00 am – 6:00 pm EST For Order Placement:Fax (866) 998-4432 or [email protected]
Merillat® cabinetry carries the seal of the Kitchen Cabinet Manufacturers Association (KCMA) Certification Program, which assures that our cabinets meet or exceed the rigorous standards set by the American National Standards Institute (ANSI). Our cabinets are also independently tested to ANSI/KCMA A161.1–2000 and paragraph 611–1.1, “HUD Minimum Property Standards–Housing 4910.1” 9-8-86. Merillat Cabinetry demonstrates its commitment to environmental sustainability through meeting or exceeding the requirements as outlined in the Environmental Stewardship Program certification, administered by the KCMA. All Merillat Cabinetry facilities have also obtained ISO 14001 certificate of approval, demonstrating our commitment to reducing the impact of operations on the environment.
What’s N
ew
What’s New i-v Welcome i What’s New ii Code System iii-iv Understanding Product Codes v
Door Styles A1-A8
Finishes B1-B4
Cabinet Specifications and Options C1-C16 Cabinet Specifications C1-C6 Construction Options C7-C16
Wall Cabinets D1-D24 Wall Cabinets D1-D4 Wall Corner Cabinets D5-D9 Wall Open Cabinets D10-D11 Wall Appliance Cabinets D12-D14 Wall Hoods D15-D16 Wall Accessories D17-D24
Base Cabinets E1-E34 Base Cabinets E1-E6 Base Sink Cabinets E7-E14 Base Corner Cabinets E15-E21 Base Appliance Cabinets E22-E24 Base Accessories E25-E34
Tall Cabinets F1-F10 Tall Cabinets F1-F3 Tall Appliance Cabinets F4-F6 Tall Accessories F7-F10
Vanity Cabinets G1-G14 Vanity Cabinets G1-G10 Vanity Accessories G11-G14
Office Cabinets H1-H4 Office Cabinets H1-H3 Office Accessories H4
Universal Access Cabinets I1-I6
Panels-Shelving-Trays J1-J12 Panels J1-J3 Shelving J4-J6 Trays J7-J12
Decorative Enhancements K1-K24 Supports & Valances K1-K2 Moldings K3-K15 Molding Accents K16-K19 Decorative Hardware Knobs K20-K21 Decorative Hardware Pulls K22-K24
Replacement Parts L1-L34 Touch Up Materials L1-L3 Sales Doors L4Accessories L5 Replacement Parts L6-L14 Understanding Replacement Parts L15-L16 Doors and Drawer Fronts - Parts Index L17-L24Doors and Drawer Fronts - Sizes L25-L29Accessory Non-Drilled Doors -Sizes L30-L32 Drawer Boxes L33-L34
Framed Cabinet Specifications M1 -M14
Indexes N1-O8 Nomenclature Index N1-N8 Index O1-O4
Table of Contents
Table of Contents
Wha
t’s N
ew
Welcome to your New 2015 Merillat Classic® Product Specifications Book
We’ve made some changes to this book that we hope will assist you in navigating products, designing, ordering and installation.
Here are a couple of things you’ll notice:
FormatAfter speaking with our customers and customer care center, we have updated our specification book to reduce redundancy and greatly simplify navigating our products.
Order Code System definedWe’ve created an Order Code System map that explains how it works and what it all means. In addition, we’ve integrated the code examples and provided code segment references throughout the entire book.
Replacement PartsNew to the Product Specification book is the Replacement Parts section. In this section you will be able to find replacement doors, drawer fronts and drawer boxes. In addition to this, we have added more hardware including various hinges, guides, mounting brackets, and shelf supports and clips.
OptionsWe’ve redefined how options work in our book by designing a system that directly communicates option availability. Options are now shown to the right of each product with an icon that corresponds to its availability. This will allow you to quickly recognize the option availability for each cabinet.
We hope you love our new format as much as we do! We genuinely feel that this specification book goes beyond the normal listing of part numbers by providing you with the tools needed to get the job done.
Whether your feedback is a question, suggestion or a compliment we would love to hear from you. Please share with us at [email protected].
Thanks for choosing Merillat Classic® , our cornerstone product line!
i Welcome
What’s N
ew
iiWhat’s New
New ProductConstruction Options PagePrepared for Glass Inserts C14Prepared for Mullion Glass Inserts C14Prepared for Prairie Glass Inserts C14Wall Cabinets PageWall Single Door, in 39” High D1Wall Double Door, in 33” Wide Butt Doors D2Wall Double Door, in 39” High D2Wall Double Door, in 36” Wide Butt Doors D2Wall Refrigerator, in 33”Wide Butt Doors D3Wall Refrigerator, in 36” Wide Butt Doors D3Peninsula Wall Double Door, in 36” Wide Butt Doors D4Wall Blind Corner Single Door, in 39” High D6Wall Angle Single Door, in 39” High D7Wall Easy Reach, in 39” High D8Wall Corner Angle, in 39” High D8Wall End Corner, in 39” High D9Bookcase, in 39” High D10Door Storage Unit 18” and 24” Wide D13Wall Microwave Cabinet 45” High, in 27” and 30” Wide Butt Doors D13Wall Filler, in 39” High D20Wall Fluted Filler, in 39” High D20Fluted Filler Angle, in 39” High D21Filler Overlay, in 39” High D22Matching Wall End Panel, in 39” High D24Base Cabinets PageBase Butt Door, in 33” Wide Butt Doors E2Base Butt Door Full-Height, in 33” Wide Butt Doors E2Base Butt Doors, in 36” Wide Butt Doors E2Base Butt Door Full-Height, in 36” Wide Butt Doors E2Peninsula Base Butt Door, in 36” Wide Butt Doors E4Base Pots and Pans Cabinet in 27”, 30”, and 36” Wide E4Sink Base Double Door Full-Height, in 36” Wide Butt Doors E15Sink Base Double Door Full-Height, in 33” Wide Butt Doors E15Sink Base Double Door, 24” and 27” Deep, in 33” Wide Butt Doors E16Sink Base Double Door w/Utility Tray, 24” and 27”, in 33” Wide Butt Doors E16Sink Base Double Door, 24” and 27” Deep, in 36” Wide Butt Doors E16Sink Base Double Door w/Utility Tray, 24” and 27” Deep, in 36” Wide Butt Doors E16Sink Front Double Door, in 36” Wide Butt Doors E17Sink Front Double Door Full-Height, in 36” Wide Butt Doors E18Removable Sink Front Double Door, in 30”, 33”, 36, Wide Butt Doors E20Removable Sink Front Double Door, in 42” Wide E20Tall Cabinets PageTall Utility Cabinet 12” Deep, in 93” High F1Tall Utility Cabinet 12” Deep in 84”, 90”, and 96” High, w/Butt Doors F1Tall Utility Cabinet 24” Deep, in 93” High F2Utility Front, in 93” High F2Tall Utility Cabinet 24” Deep in 84”, 90”, and 96” High, w/Butt Doors F2Utility Front 24” Wide in 84”, 90” and 96” H, w/Butt Doors F2Pantry Cabinet Butt Door, in 93” High F3Oven Cabinet Universal in 27”, 30”, and 33” Wide, in 93” High F4Oven Cabinet Universal in 84”, 90”, and 96” High, w/Butt Doors F4Oven Cabinet Single in 27”, 30”, and 33” Wide, in 93” High F5Matching Tall End Panel, in 93” High F5Tall Filler, in 93” High F7Tall Fluted Filler, in 93” High F7Filler Overlay, in 93” High F7Tall End Panel , in 108” High F9
New
New ProductVanity Cabinets PageVanity Base Double Door Full-Height, in 24” Wide Butt Doors G2Vanity Base Double Door Full-Height, in 33” Wide Butt Doors G2Vanity Base Double Door Full-Height, in 36” Wide Butt Doors G2Vanity Linen Cabinet Tall, in 24” Wide Butt Doors G7Vanity Wall Boutique, in 24” Wide Butt Doors G7Universal Cabinets PageUniversal Removable Sink Front in 30”, 33”, 36” and 42” high I4Panels, Shelving, and Trays PageUniversal Access Panel in 30”, 33”, 36”, and 42” High J2Base Deep Tray Kit w/side mount guides for 33” Butt doors J8
What’s ChangedWhite Cabinets will have Natural Wood Grain interiorWhite cabinet drawer Cores/Trays have solid hardwood fronts with Natural Wood Grain laminate Wall Refrigerator Cabinets with Glass Door option on select sizesFull Depth Shelves now offered with Modified Depth OptionsOverlays (OL) orderable separately for all Full Overlay door styles except FusionReplacement Parts
What’s DiscontinuedFinishesOatmeal with Desert GlazeCider on Hickory and Red OakMediumWall CabinetsAppliance Garage Tambour Straight 36”Fluted Filler Angle 3” Wide- Discontinued in 48”, 54” and 60”Wall Fluted Filler 3” Wide- Discontinued in 21”Message Center Pull DownWire Stem Glass HolderBase CabinetsBase Swing Out Shelf Cabinet in Almond (White available)Office CabinetsFloating Keyboard Tray KitPanels, Shelving, and TraysROT2418 - See ROT2418BROT2421 - See ROT2421BCabinet CareAcrylic Latex CaulkMini Sample Base Cabinet
Gray color coding indicates new product, size or code
Watch for this icon highlighting new items
Watch for grey codes and this note highlighting new models or codesBPPS27-2D
What’s New for the Merillat Classic®product line in 2015
Code
Sys
tem
Q Door Style CodeArbor Falls II ABFAvenue AVEBayville BVEBellingham BLHCannonsburg CSBFox Harbor FXR Fusion FSNGlen Arbor GNALaBelle LBLLariat LRTPortrait PRTRalston RALSeneca Ridge SNRSomerton Hill SMHSpring Valley SVLSutton Cliffs STCTolani TLNWhitebay II WHB
P Species CodeCherry CHHickory HKMaple MPRed Oak ROThermofoil TH
O Door Shape CodeArch ASquare S
Slab B
N Stain Finishes CodeAmaretto ARNONCider CDNONDusk DSNONHazelnut HZNONKona KONONNatural NANONPaprika PPNONPecan PCNONSable SBNONSedona SDNONToffee TFNONWhite WHNON
N Stain w/Accent Glaze Finishes CodeHazelnut w/Java Accent HZJVANatural w/Java Accent NAJVASable w/Ebony Accent SBEBASedona w/Ebony Accent SDEBAToffee w/Java Accent TFJVA
N Stain w/Glaze Finishes CodeAmaretto w/Java Glaze ARJVZCider w/Java Glaze CDJVZHazelnut w/Java Glaze HZJVZNatural w/Java Glaze NAJVZPaprika w/Ebony Glaze PPEBZSable w/Ebony Glaze SBEBZ
Toffee w/Java Glaze TFJVZ
Q P O N M L K J I H
SVL . RO . S . NANON . N . NNNN . SST . S . C . B15LHDS Door Species Door Finish Cabinet Drawer Carton Model + Options Style Shape Construction Front Construction
Merillat Ordering CodeMerillat builds its order code from global options, model, and model options which together define an orderable item. The order code is created from the door, finish, construction, cartoning, model and model options to complete the order code. The order code can incorporate all possible combinations available in the Merillat product line. Each order code must be complete to be recognized as a unique product. By understanding the Merillat code system you can identify any product with any variation or option in one place.
Following is a breakdown of each order code segment and how it combines to make a full order code. Each segment is identified with an identification number. That number will be repeated on this page and every page where the specification of product relates to a segment position of the order code.
Code System
iii Code System
Code System
Model + Option Code Examples Code
Wall Single Door Cabinet 18” Wide x 42” High x 12” Deep Hinged Right Mullion Glass Door with Matching Interior W1842RMGMIWall Single Door Cabinet 18” Wide x 42” High x 15” Deep Hinged Right Mullion Glass Door with Matching Interior W184215RMGMIBase Single Door Cabinet 21” Wide Hinged Right with 2 Deluxe Trays B21R2DTBase Double Door Cabinet 30” Wide with Half Depth Shelf B30HDSBase Double Door Cabinet 30” Wide with 4 Standard Trays B304STUtility Cabinet Single Door 15” Wide x 96” High x 24” Deep Hinged Right U159624RVanity Combination Drawer 24” Wide x 34 1/2” High Drawers Left VCD2435DL
Code System
AModel
W1842
B21
B30
U159624
VCD2435DL
BDepth Code
9” deep 09
12” deep 12
15” deep 15
18” deep 18
21” deep 21
24” deep 24
CHinging Code
Left L
Right R
DTray/Shelf Code
Half Depth Shelf HDS
Full Depth Shelf FDS
1 Standard Tray 1ST
2 Standard Trays 2ST
3 Standard Trays 3ST
4 Standard Trays 4ST
6 Standard Trays 6ST
1 Standard Full
Width Tray 1FT
2 Standard Full
Width Trays 2FT
2 Deluxe Trays 2DT
4 Deluxe Trays 4DT
6 Deluxe Trays 6DT
2 Deluxe Full
Width Trays 2DF
EGlass Door Code
Glass Door GD
Prepared for
Glass Door PG
Mullion Glass MG
Prepared for Mullion Glass PM
Prairie Glass PM
Prepared for
Prairie Glass PP
FMatching CodeInterior
MatchingInterior MI
GPartial CodeCabinet
CabinetFrontOnly CFO
N Painted Finish Code Chiffon CHNON Cotton CTNON
N Painted Finish w/Accent Glaze Code Chiffon w/Desert Accent CHDSA Chiffon w/Tuscan Accent CHTNA Cotton w/Tuscan Accent CTTNA
N Painted Finish w/Glaze Code Chiffon w/Desert Glaze CHDSZ Chiffon w/Tuscan Glaze CHTNZ Cotton w/Tuscan Glaze CTTNZ
M This attribute is being held for future use to indicate special finishing options
N
L This attribute is being held for future use to indicate special construction material options NNNN
K Cabinet Construction
XCabinet ConstructionCodeS, P, A
YDrawer BoxCodeS, D
ZThick ShelfCodeS, T
Options Code Standard Construction, Standard Drawers, Thick Shelves SST Standard Construction, Dovetail Drawers, Thick Shelves SDT Standard Construction with Plywood Ends, Standard Drawers, Thick Shelves PST Standard Construction with Plywood Ends, Dovetail Drawers, Thick Shelves PDT All Plywood Construction, Dovetail Drawers, Thick Shelves *ADT
* O n l y a v a i l a b l e w i t h D o v e t a i l D r a w e r s
J Drawer Front Construction Code Solid Drawer Front S 3-Piece Drawer Front 3 Option upgrade on Tolani 5-Piece Drawer Front Option 5 Option upgrade on Avenue, Cannonsburg, Portrait, and Ralston. Standard on Bayville, Bellingham, Labelle, and Lariat.
I Cartoning Code Cartoned C
H Model + Options
Code must appear in the order listed below. Not all code slots need to appear in the model + option code, just the options that apply.
iv
Code
Sys
tem
Understanding Product Codes
Standard CabinetsWall Cabinet widths are always listed first followed by height. A standard wall cabinet is 12” deep except for Wall Refrigerator Cabinets which have a standard depth of 24”. Thus 36 is the width, 24 is the height and depth is 12”. Depth is only listed as the last two numbers when depth is other than standard.
Tall cabinets follow the same sequence characteristics as Wall Cabinets; width first followed by height (eg; U 1884). In those instances where the cabinet depth is greater than 12”, the sequence is width and height, followed by depth (eg; U 188424).
Base Cabinets are simpler than Wall Cabinets because the height (34 1⁄2” plus 1 1⁄2” for the countertop) and the depth (24”) are always the same unless otherwise noted. The only numbers you need to know are the width.
Vanity Cabinets are similar to Base Cabinets; the numbers are used to represent the width. Vanity Sink Base Cabinets are either 31 1⁄2” or 34 1⁄2” high plus 1 1⁄2” for the countertop. This particular cabinet is 31 1/2” high and comes standard with two drawers and is located at the end of the code.
Cabinets with OptionsGlass Doors are an available option for select Wall Cabinets. Previously, Wall Cabinets with Glass Doors were listed as different cabinets. Now that Glass Doors are options, we can provide you with more focused information; less clutter. The Mullion Glass Door option has been chosen for this cabinet. The code looks the same as it did before with (MG) placed at the end.
Trays are an available option for select Base Cabinets. Like Glass Doors, previously Base Cabinets with Trays were listed as different cabinets. With Trays becoming clear options, we are able to communicate with greater detail the different trays to choose from and the availability of the option with ease. The option of 2 Deluxe Trays has been chosen for this cabinet. The code looks the same as it did before with (2DT) placed at the end.
We now offer Modified Depth options in increments of 3”. Previously we offered only limited depths to cabinets. These predetermined depths were listed as separate cabinets making it difficult to see the selections. Now with six options of Modified Depth to choose from, you are able to interact with our products on a truly semi-custom level. The option of reduce to 15” deep has been chosen for this cabinet. This cabinet is 36” wide, 34 1/2” high with 2 drawers and a modified depth of 15”.
Cabinet Height
W3624Cabinet Width
Wall Cabinet
A
B24Cabinet WidthBase Cabinet
A
Number of Drawers
VSB36-2DCabinet Width
Vanity Cabinet
A
Cabinet Height
W3624MGCabinet Width
Wall Cabinet
A
Glass Door Option
E
Tray Option
B242DTCabinet Width
Base Cabinet
A D
Number of Drawers
VSB3635-2D15Cabinet Width
Vanity Cabinet
A
Modified Depth
B
Cabinet Height
v Understand Product Codes
Door Styles
A1Door Styles
Arbor Falls II
QPOJ ABF.TH .S .S Thermofoil
• Traditional Overlay door design• White vinyl laminated MDF with raised center panel on door• Doors and drawer fronts have a 90° return with an integrated finger pull• White vinyl laminated MDF slab drawer front• Concealed, self-closing hinge• Decorative hardware is optional• Mullion Glass Door (MG) and Prepared for Mullion Glass (PM) options are
available on select cabinets. See Construction Options for specifics• Cabinet face frame is White painted maple• Not available with optional Plywood Ends or All Plywood Construction (ADT)
Base Wall
°
Avenue w/Solid Drawer Front
QPOJ AVE.CH .S .S Cherry AVE.MP .S .S Maple
• Full overlay door design• Solid wood door frame with 2 3/16” stiles and rails• Recessed, flat, veneer center panel door with v-grooves on 1 1/2” centers• Doors and drawers have a 90º return with no reverse bevel• Slab drawer front is solid wood• Concealed, self-closing hinge• Decorative hardware is required• Prairie Glass Door (PR) and Prepared for Prairie Glass Door (PP) option
available on select cabinets. See Construction Options for specifics
Base Wall
°
°
Avenue w/5-Piece Drawer Front Option
QPOJ AVE.CH .S .5 Cherry AVE.MP .S .5 Maple
• Full overlay door design• Solid wood door frame with 2 3/16” stiles and rails• Recessed, flat, veneer center panel door with v-grooves on 1 1/2” centers• Doors and drawers have a 90º return with no reverse bevel• 5-piece recessed panel drawer front with v-grooves• Concealed, self-closing hinge• Decorative hardware is required• Prairie Glass Door (PR) and Prepared for Prairie Glass Door (PP) option
available on select cabinets. See Construction Options for specifics
Base Wall
°
°
Door Styles
Q P O J SVL RO S S
Doo
r Sty
les
A2 Door Styles
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B12LHDS
Bayville
QPOJ BVE.CH .S .5 Cherry BVE.MP .S .5 Maple
• Full overlay door design• Solid wood, mitered door frame with 2 1/2” stiles and rails• Doors and drawers have a 90º return with no reverse bevel• 5-piece mitered drawer front with solid wood recessed panel• Solid wood drawer frame with 2 1/2” stiles and rails, except drawer fronts 4 1/8” tall or
less, which have 1 1/2” stiles and rails• Concealed, self-closing hinge• Decorative hardware is required• Glass Door (GD) and Prepared for Glass Door (PG) option is available on select
cabinets. See Construction Options for specifics
Base Wall
°
Bellingham
QPOJ BLH.CH .S .5 Cherry BLH.MP .S .5 Maple
• Full overlay door design• Solid wood door frame with 2 3/16” stiles and rails• Doors and drawers have a 90º return with no reverse bevel• 5-piece mitered drawer front with solid wood recessed panel• Solid wood drawer frame with 2 3/16” stiles and rails, except drawer fronts 4 1/8” tall or
less, which have 1 1/2” stiles and rails• Concealed, self-closing hinge• Decorative hardware is required• Glass Door (GD) and Prepared for Glass Door (PG) option is available on select
cabinets. See Construction Options for specifics
Base Wall
°
Cannonsburg w/Solid Drawer Front
QPOJ CSB.CH .S .S Cherry CSB.MP .S .S Maple
• Full overlay door design• Solid wood door frame with 2 7/8” stiles and rails• Recessed, flat, veneer center panel door with applied solid wood molding• Doors and drawers have a 90º return with no reverse bevel• Slab drawer front is solid wood• Concealed, self-closing hinge• Decorative hardware is required• Glass Door (GD) and Prepared for Glass Door (PG) option is available on select
cabinets. See Construction Options for specifics
Base Wall
°
Cannonsburg w/5-Piece Drawer Front Option
QPOJ CSB.CH.S .5 Cherry CSB.MP.S .5 Maple
• Full overlay door design• Solid wood door frame with 2 7/8” stiles and rails• Recessed, flat, veneer center panel door with applied solid wood molding• Doors and drawers have a 90º return with no reverse bevel• 5-piece drawer front with solid wood recessed panel and applied molding• Solid wood drawer frame with 2 7/8” stiles and 1 1/2” rails, except drawer fronts 4 1/8”
tall or less are solid 9 3/4” tall or greater have 2 7/8” stiles and rails• Concealed, self-closing hinge• Decorative hardware is required• Glass Door (GD) and Prepared for Glass Door (PG) option is available on select
cabinets. See Construction Options for specifics
Base Wall
°
Door Styles
A3Door Styles
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B12LHDS
Fox Harbor
QPOJ FXR.CH .S .S Cherry FXR.MP .S .S Maple
• Full overlay door design• Solid wood door frame with 2 3/16” stiles and rails• Wood veneer, raised center panel door• Doors and drawers have a 90º return with no reverse bevel• Slab drawer front is solid wood• Concealed, self-closing hinge• Decorative hardware is required• Glass Door (GD), Mullion Glass Door (MG), Prepared for Glass Door (PG) and
Prepared for Mullion Glass Door (PM) options available on select cabinets. See Construction Options for specifics
Base Wall
°
Fusion
QPOJ FSN.CH .B .S Cherry FSN.MP .B .S Maple
• Full overlay door design• Slab door with vertical grain• Doors and drawer fronts have an engineered wood core with wood veneer on front and back• Doors and drawer fronts have a 90º return and are veneer edgebanded• Doors have vertical grain; drawer fronts have horizontal grain• Concealed, self-closing hinge• Decorative hardware is required• Wall glass doors feature solid wood stiles and rails• Glass Door (GD) and Prepared for Glass Door (PG) option is available on select
cabinets. See Construction Options for specifics
Base Wall
°
Glen Arbor
QPOJ GNA.CH.S .S Cherry GNA.MP.S .S Maple GNA.RO.S .S Red Oak
• Traditional Overlay door design• Solid wood door frame with 2 3/16” stiles and rails• Doors and drawers have a 90º return with no reverse bevel• Slab drawer front is solid wood• Concealed, self-closing hinge• Decorative hardware is optional• Glass Door (GD), Mullion Glass Door (MG), Prepared for Glass Door (PG) and
Prepared for Mullion Glass Door (PM) options available on select cabinets. See Construction Options for specifics
Base Wall
°
Labelle
QPOJ LBL.CH .S .5 Cherry LBL.MP .S .5 Maple• Full overlay door design• Solid wood door frame with 2 3/16” stiles and rails• Solid wood, raised center door panel• Doors and drawers have a 90º return with no reverse bevel• 5-piece mitered drawer front with solid wood recessed panel• Solid wood drawer frame with 2 3/16” stiles and rails, except drawer fronts 4 1/8”
tall or less, which have 1 1/2” stiles and rails• Drawer fronts 9 3/4” tall or greater have 2 3/16” stiles and rails with a solid wood
raised center panel• Concealed, self-closing hinge• Decorative hardware is required• Glass Door (GD) and Prepared for Glass Door (PG) option is available on select
cabinets. See Construction Options for specifics
Base Wall
°
Doo
r Sty
les
A4 Door Styles
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B12LHDS
Lariat
QPOJ LRT.CH .S .5 Cherry LRT.MP .S .5 Maple
• Full overlay door design• Solid wood, mitered door frame with 2 1/2” stiles and rails• Recessed, veneer center panel door with solid wood rope molding• Doors and drawers have a 90º return with no reverse bevel• 5-piece mitered drawer front with solid wood, flat recessed panel and rope molding• Solid wood drawer frame with 2 1/2” stiles and rails, except drawer fronts 4 1/8” tall
or less, which have 1 1/2” stiles and rails• Concealed, self-closing hinge• Decorative hardware is required• Glass Door (GD) and Prepared for Glass Door (PG) option is available on select
cabinets. See Construction Options for specifics
Base Wall
°
Portrait w/Solid Drawer Front
QPOJ PRT.CH .S .S Cherry PRT.MP .S .S Maple PRT.RO .S .S Red Oak
• Full overlay door design• Solid wood door frame with 2 3/16” stiles and rails• Doors and drawers have a 90º return with no reverse bevel• Slab drawer front is solid wood• Concealed, self-closing hinge• Decorative hardware is required• Prairie Glass Door (PR) and Prepared for Prairie Glass Door (PP) option available on
select cabinets. See Construction Options for specifics
Base Wall
°
°
Portrait w/5-Piece Drawer Front Option
QPOJ PRT.CH .S .5 Cherry PRT.MP .S .5 Maple
• Full overlay door design• Solid wood door frame with 2 3/16” stiles and rails• Doors and drawers have a 90º return with no reverse bevel• 5-piece drawer front with solid wood 2 3/16” stiles and rails with a solid wood center
panel, except drawer fronts that are 4 1/8” tall or less, which are slab• Concealed, self-closing hinge• Decorative hardware is required• Prairie Glass Door (PR) and Prepared for Prairie Glass Door (PP) option available on
select cabinets. See Construction Options for specifics
Base Wall
°
°
Ralston w/Solid Drawer Front
QPOJ RAL.CH .S .S Cherry RAL.MP .S .S Maple
• Full overlay door design• Solid wood door frame with 3˝ stiles and rails• Doors and drawers have a 90º return with no reverse bevel• Slab drawer front is solid wood• Concealed, self-closing hinge• Decorative hardware is required• Glass Door (GD), Mullion Glass Door (MG), Prepared for Glass Door (PG) and
Prepared for Mullion Glass Door (PM) options available on select cabinets. See Construction Options for specifics
Base Wall
°
Door Styles
A5Door Styles
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B12LHDS
Ralston w/5-Piece Drawer Front Option
QPOJ RAL.CH .S .5 Cherry RAL.MP .S .5 Maple
• Full overlay door design• Solid wood door frame with 3˝ stiles and rails• Doors and drawers have a 90º return with no reverse bevel• 5-piece drawer front with solid wood 3” stiles and 1 1/2” rails with a solid wood center
panel, except for 9 3/4” tall or taller, which have 3” rails• Concealed, self-closing hinge• Decorative hardware is required• Glass Door (GD), Mullion Glass Door (MG), Prepared for Glass Door (PG) and Prepared
for Mullion Glass Door (PM) options available on select cabinets. See Construction Options for specifics
Base Wall
°
Seneca Ridge Arch
QPOJ SNR.CH .A .S Cherry SNR.MP .A .S Maple SNR.RO .A .S Red Oak
• Traditional Overlay door design• Solid wood door frame with 2 3/16” stiles and rails• Wood veneer, raised center panel door• Top and bottom edges of doors and drawers have a 15º reverse bevel• Slab drawer front is solid wood• Concealed, self-closing hinge• Decorative hardware is optional• Arch doors are only available for Wall cabinets and top doors of Tall cabinets• Mullion Glass Door (MG) and Prepared for Mullion Glass (PM) options are available on
select cabinets. See Construction Options for specifics
Base Wall
°
Seneca Ridge Square
QPOJ SNR.CH .S .S Cherry SNR.MP .S .S Maple SNR.RO .S .S Red Oak
• Traditional Overlay door design• Solid wood door frame with 2 3/16” stiles and rails• Wood veneer, raised center panel door• Top and bottom edges of doors and drawers have a 15º reverse bevel• Slab drawer front is solid wood• Concealed, self-closing hinge• Decorative hardware is optional• Mullion Glass Door (MG) and Prepared for Mullion Glass (PM) options are available on
select cabinets. See Construction Options for specifics
Base Wall
°
Somerton Hill Arch
QPOJ SMH.CH.A .S Cherry SMH.MP.A .S Maple
• Full overlay door design• Solid wood door frame with 2 3/16” stiles and rails• Solid wood, raised center door panel• Doors and drawers have a 90º return with no reverse bevel• Slab drawer front is solid wood• Concealed, self-closing hinge• Decorative hardware is required• Arch doors are only available for Wall cabinets and top doors of Tall cabinets• Mullion Glass Door (MG) and Prepared for Mullion Glass (PM) options are available on
select cabinets. See Construction Options for specifics
Base Wall
°
Doo
r Sty
les
A6 Door Styles
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B12LHDS
Somerton Hill Square
QPOJ SMH.CH .S .S Cherry SMH.MP .S .S Maple
• Full overlay door design• Solid wood door frame with 2 3/16” stiles and rails• Solid wood, raised center door panel• Doors and drawers have a 90º return with no reverse bevel• Slab drawer front is solid wood• Concealed, self-closing hinge• Decorative hardware is required• Mullion Glass Door (MG) and Prepared for Mullion Glass (PM) options are available on
select cabinets. See Construction Options for specifics
Base Wall
°
Spring Valley Arch
QPOJ SVL.CH .A .S Cherry SVL.HK .A .S Hickory SVL.MP .A .S Maple SVL.RO .A .S Red Oak
• Traditional Overlay door design• Solid wood door frame with 2 3/16” stiles and rails• Doors with painted finishes will either have a recessed, flat, veneer or Medium Density
Fiberboard (MDF) center panel • Top and bottom edges of doors and drawers have a 15º reverse bevel• Slab drawer front is solid wood• Concealed, self-closing hinge• Decorative hardware is optional• Arch doors are only available for Wall cabinets and top doors of Tall cabinets• Mullion Glass Door (MG) and Prepared for Mullion Glass (PM) options are available on
select cabinets. See Construction Options for specifics
Base Wall
°
Spring Valley Square
QPOJ SVL.CH .S .S Cherry SVL.HK .S .S Hickory SVL.MP .S .S Maple SVL.RO .S .S Red Oak
• Traditional Overlay door design• Solid wood door frame with 2 3/16” stiles and rails• Doors with painted finishes will either have a recessed, flat, veneer or Medium Density
Fiberboard (MDF) center panel • Top and bottom edges of doors and drawers have a 15º reverse bevel• Slab drawer front is solid wood• Concealed, self-closing hinge• Decorative hardware is optional• Mullion Glass Door (MG) and Prepared for Mullion Glass (PM) options are available on
select cabinets. See Construction Options for specifics
Base Wall
°
Sutton Cliffs Arch
QPOJ STC.CH .A .S Cherry STC.HK .A .S Hickory STC.MP .A .S Maple STC.RO .A .S Red Oak
• Traditional Overlay door design• Solid wood door frame with 2 3/16” stiles and rails• Solid wood, raised center door panel• Top and bottom edges of doors and drawers have a 15º reverse bevel• Slab drawer front is solid wood• Concealed, self-closing hinge• Decorative hardware is optional• Arch doors are only available for Wall cabinets and top doors of Tall cabinets• Mullion Glass Door (MG) and Prepared for Mullion Glass (PM) options are available on
select cabinets. See Construction Options for specifics
Base Wall
°
Door Styles
A7Door Styles
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B12LHDS
Sutton Cliffs Square
QPOJ STC.CH .S .S Cherry STC.HK .S .S Hickory STC.MP .S .S Maple STC.RO .S .S Red Oak• Traditional Overlay door design• Solid wood door frame with 2 3/16” stiles and rails• Solid wood, raised center door panel• Top and bottom edges of doors and drawers have a 15º reverse bevel• Slab drawer front is solid wood• Concealed, self-closing hinge• Decorative hardware is optional• Glass Door (GD), Prairie Glass Door (PR), Prepared for Glass Door (PG) and
Prepared for Prairie Glass Door (PP) options available on select cabinets. See Construction Options for specifics
Base Wall
°
Tolani w/Solid Drawer Front
QPOJ TLN.CH .S .S Cherry TLN.MP .S .S Maple TLN.RO .S .S Red Oak
• Full overlay door design• Solid wood door frame with 2 7/8” stiles and rails• Doors and drawers have a 90º return with no reverse bevel• Slab drawer front is solid wood• Concealed, self-closing hinge• Decorative hardware is required• Glass Door (GD), Prairie Glass Door (PR), Prepared for Glass Door (PG) and
Prepared for Prairie Glass Door (PP) options available on select cabinets. See Construction Options for specifics
Base Wall
°
°
Tolani w/3-Piece Drawer Front Options
QPOJ TLN.CH .S .3 Cherry TLN.MP .S .3 Maple TLN.RO .S .3 Red Oak
• Full overlay door design• Solid wood door frame with 2 7/8” stiles and rails• Doors and drawers have a 90º return with no reverse bevel• 3-piece solid wood drawer front• Concealed, self-closing hinge• Decorative hardware is required• Glass Door (GD), Prairie Glass Door (PR), Prepared for Glass Door (PG) and
Prepared for Prairie Glass Door (PP) options available on select cabinets. See Construction Options for specifics
Base Wall
°
°
Whitebay II Arch
QPOJ WHB.TH.A .S Thermofoil
• Full overlay door design• White vinyl laminated MDF with raised center panel on door• Doors and drawers have a 90º return with no reverse bevel• White vinyl laminated MDF slab drawer front• Cabinet face frame is White painted maple• Concealed, self-closing hinge• Decorative hardware is required• Arch doors are only available for Wall cabinets and top doors of Tall cabinets• Mullion Glass Door (MG) and Prepared for Mullion Glass (PM) options are available
on select cabinets. See Construction Options for specifics• Not available with optional Plywood Ends or All Plywood Construction (ADT)
Base Wall
°
Doo
r Sty
les
A8 Door Styles
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B12LHDS
Whitebay II Square
QPOJ WHB.TH.S .S Thermofoil
• Full overlay door design• White vinyl laminated MDF with raised center panel on door• Doors and drawers have a 90º return with no reverse bevel• White vinyl laminated MDF slab drawer front• Cabinet face frame is White painted maple• Concealed, self-closing hinge• Decorative hardware is required• Mullion Glass Door (MG) and Prepared for Mullion Glass (PM) options are
available on select cabinets. See Construction Options for specifics• Not available with optional Plywood Ends or All Plywood Construction (ADT)
Base Wall
°
B1Finishes
Finishes
Merillat Classic® Wood Species Cherry is a moderately hard and heavy, and has a fine-to-medium
uniform grain. Cherry commonly thought of as a deep color, but is quite different depending upon your choice of stain. Expect variations.
Maple is a popular choice featuring a fine uniform grain that takes a color quite well. Maple is versatile and available in nearly every color combination. A very consistent wood type.
Hickory is a very heavy, hard wood, and has a grain with quite a bit of variance. This creates a design element in and of itself, taking on colors in unique ways. No two doors will look alike.
Red Oak is heavy, hard wood, and has a medium-fine, noticeable grain. It gives you dramatic lines that play quite differently off of each color.
Thermofoil is a solid colored vinyl that is applied to smooth, engineered wood or Medium Density Fiberboard (MDF). Easy to clean and built to last, Thermofoil cabinetry gives you uniform appearance.
Thermofoil Finishes- Thermofoil Heavy gauge vinyl laminate is applied with thermo-pressure to door and
drawer front and edges- White (WHNON) Solid white color with satin finish
Stain Finishes- Stain Process Stain is applied and brush-wiped to desired color. Next, sealer is applied
to protect the finish and prevent warping and cracking of the hardwood. Sealer is then sanded to develop a bonding surface for the topcoating process.
As a final step, a heat activated topcoat is applied to provide a beautiful and durable furniture finish. Finish availability may vary by door style. See Finish Availability Chart.
- Amaretto (ARNON) Rich golden brown Available on select Cherry and Red Oak door styles- Cider (CDNON) Light yellow/brown Available on select Cherry door styles- Dusk (DSNON) Sheer deep blue/grey Available on select Maple door styles- Hazelnut (HZNON) Golden with yellow undertones Available on select Maple door styles- Kona (KONON) Deep semi-transparent dark brown Available on select Maple and Red Oak door styles- Natural (NANON) Clear sealer and topcoat Available on select Hickory, Maple, and Red Oak door styles- Paprika (PPNON) Medium red cherry Available on select Cherry door styles- Pecan (PCNON) Warm rich brown with deep brown undertones and black overtones Available on select Cherry, Maple and Red Oak door styles- Sable (SBNON) Rich medium brown Available on select Maple door styles- Sedona (SDNON) Rich traditional cherry finish on maple Available on select Maple door styles- Toffee (TFNON) Warm brown Available on select Maple door styles
P O M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B15LHDSQ
Merillat Classic® Finishes End grain surfaces and softer areas of the wood may accept more stain
and often appear darker than other surfaces. Since wood is in a constant state of expansion and contraction, visible
lines are normal at the joints on the cabinet face frames, doors and 3-Piece and 5-Piece drawer fronts
All wood species show some wood grain. The amount of grain will vary by species and finish. Red Oak is an open or coarse grain wood. The grain will visibly show through the stain. Maple is a closed or fine grain wood that can have mineral streaks and pin holes. When paint is applied to Maple these beauty marks may remain slightly visible.
Stain w/Accent Glaze FInishes - Stain w/Accent Glaze Process Stain is applied and brush-wiped to desired color. Next, sealer is
applied to protect the finish and prevent warping and cracking of the hardwood. Sealer is then sanded to develop a bonding surface for the accent glazing and topcoat process.
Accent glaze is applied by hand to specific door and drawer front profiles depending on door style and then cured.
As a final step, a heat activated topcoat is applied to provide a beautiful and durable furniture finish. Finish availability varies by door style. See Finish Availability Chart.
- Hazelnut with Java Accent (HZJVA) Golden with yellow undertones and dark brown accent glaze Available on select Maple door styles - Natural with Java Accent (NAJVA) Clear sealer and topcoat with dark brown accent glaze Available on select Maple door styles- Sable with Ebony Accent (SBEBA) Rich medium brown with charcoal (black) accent glaze Available on select Maple door styles- Sedona with Ebony Accent (SDEBA) Rich traditional cherry finish with charcoal (black) accent glaze Available on select Maple door styles- Toffee with Java Accent (TFJVA) Warm brown with dark brown accent glaze Available on select Maple door styles
B2 Finishes
Fini
shes
Stain w/Glaze Finishes - Stain w/Traditional Glaze Process Stain is applied and brush-wiped to desired color. Next, sealer is applied
to protect the finish and prevent warping and cracking of the hardwood. Sealer is then sanded to develop a bonding surface for the glazing and topcoat process.
Glaze is hand applied by hand face side only to corner hang-ups and profile recesses depending on door style.
As a final step, a heat activated topcoat is applied to provide a beautiful and durable furniture finish. Finish availability varies by door style. See Finish Availability Chart.
- Amaretto with Java Glaze (ARJVZ) Rich golden brown with dark brown glaze Available on select Cherry door styles- Cider with Java Glaze (CDJVZ) Light yellow/brown with dark brown glaze Available on select Cherry door styles- Hazelnut with Java Glaze (HZJVZ) Golden with yellow undertones and dark brown glaze Available on select Maple door styles only- Natural with Java Glaze (NAJVZ) Clear sealer and topcoat with dark brown glaze Available on select Maple door styles- Paprika with Ebony Glaze (PPEBZ) Medium red cherry with charcoal (black) glaze Available on select Cherry door styles- Sable with Ebony Glaze (SBEBZ) Rich medium brown with charcoal (black) glaze Available on select Maple door styles- Toffee with Java Glaze (TFJVZ) Warm brown with dark brown glaze Available on select Maple door styles
Painted Finishes - Paint Process Our painted finishes consist of several coats of pigmented semi-opaque
enamel paint that is allowed to saturate the hardwood developing richness while allowing some of the natural grain to remain visible.
As a final step, a heat activated topcoat is applied to provide a beautiful and durable furniture finish. Finish availability varies by door style. See Finish Availability Chart.
- Chiffon (CHNON) Cream Available on select Maple door styles- Cotton (CTNON) White Available on select Maple door styles
Paint w/Accent Glaze Finishes - Paint w/Accent Glaze Process Several coats of pigmented semi-opaque enamel paint is applied and
allowed to saturate the hardwood developing richness while allowing some of the natural grain to remain visible. Next, sealer is applied to protect the finish and prevent warping and cracking of the hardwood. Sealer is then sanded to develop a bonding surface for the accent glazing and topcoat process.
Accent glaze is hand applied to specific door and drawer front profiles depending on door style and then cured.
As a final step, a heat activated topcoat is applied to provide a beautiful and durable furniture finish. Finish availability varies by door style. See Finish Availability Chart.
- Chiffon with Desert Accent (CHDSA) Cream with brown accent glaze Available on select Maple door styles- Chiffon with Tuscan Accent (CHTNA) Cream with light gray accent glaze Available on select Maple door styles- Cotton with Tuscan Accent (CTTNA) White with light gray accent glaze Available on select Maple door styles
Paint w/Glaze Finish - Paint w/Traditional Glaze Process Several coats of pigmented semi-opaque enamel paint is applied and
allowed to saturate the hardwood developing richness while allowing some of the natural grain to remain visible. Next, sealer is applied to protect the finish and prevent warping and cracking of the hardwood. Sealer is then sanded to develop a bonding surface for the glazing and topcoat process.
Glaze is applied, face side only, to corner hang-ups and profile recesses depending on door style.
As a final step, a heat activated topcoat is applied to provide a beautiful and durable furniture finish. Finish availability varies by door style. See Finish Availability Chart.
- Chiffon Desert Glaze (CHDSZ) Cream with brown glaze Available on select Maple door styles- Chiffon with Tuscan Glaze (CHTNZ) Cream with light gray glaze Available on select Maple door styles- Cotton with Tuscan Glaze (CTTNZ) White with light gray glaze Available on select Maple door styles
P O N M L J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B15LHDSQ
B3Finishes
Finishes
Am
aret
to
Am
aret
to w
/Jav
a G
laze
Chiff
on
Chiff
on w
/Des
ert A
ccen
t
Chiff
on w
/Des
ert G
laze
Chiff
on w
/Tus
can
Acc
ent
Chiff
on w
/Tus
can
Gla
ze
Cide
r
Cide
r w/J
ava
Gla
ze
Cott
on
Cott
on w
/Tus
can
Acc
ent
Cott
on w
/Tus
can
Gla
ze
Dus
k
Haz
elnu
t
Haz
elnu
t w/J
ava
Acc
ent
Haz
elnu
t w/J
ava
Gla
ze
Kona
ARNON ARJVZ CHNON CHDSA CHDSZ CHTNA CHTNZ CDNON CDJVZ CTNON CTTNA CTTNZ DSNON HZNON HZJVA HZJVZ KONONArbor Falls II Thermofoil ABF . TH . S . S
Avenue Cherry AVE . CH . S . S l lAvenue Maple AVE . MP . S . S ; ; l l l
Avenue Cherry w/ 5-Piece Drawer Front AVE . CH . S . 5 l ; l ;Avenue Maple w/ 5-Piece Drawer Front AVE . MP . S . 5 ; ; ; ; ; l l ; l
Bayville Cherry BVE . CH . S . 5 l ; l ;Bayville Maple BVE . MP . S . 5 ; ; ; ; ; l l ; l
Bellingham Cherry BLH . CH . S . 5 l ; l ;Bellingham Maple BLH . MP . S . 5 ; ; ; ; ; l l ; l
Cannonsburg Cherry CSB . CH . S . S l lCannonsburg Maple CSB . MP . S . S ; ; l l l
Cannonsburg Cherry w/ 5-Piece Drawer Front CSB . CH . S . 5 l ; l ;Cannonsburg Maple w/ 5-Piece Drawer Front CSB . MP . S . 5 ; ; ; ; ; l l ; l
Fox Harbor Cherry FXR . CH . S . S l ; l ;Fox Harbor Maple FXR . MP . S . S ; ; ; ; ; l l ; l
Fusion Cherry FSN . CH . B . S l lFusion Maple FSN . MP . B . S ; ; l l l
Glen Arbor Cherry GNA . CH . S . S l lGlen Arbor Maple GNA . MP . S . S ; ; ; ; ; l l ; l
Glen Arbor Red Oak GNA . RO . S . S l lLaBelle Cherry LBL . CH . S . 5 l ; l ;LaBelle Maple LBL . MP . S . 5 ; ; ; ; ; l l ; lLariat Cherry LRT . CH . S . 5 l ; l ;Lariat Maple LRT . MP . S . 5 ; ; ; l l ; l
Portrait Cherry PRT . CH . S . S l lPortrait Maple PRT . MP . S . S ; ; l l l
Portrait Red Oak PRT . RO . S . S l lPortrait Cherry w/ 5-Piece Drawer Front PRT . CH . S . 5 l lPortrait Maple w/ 5-Piece Drawer Front PRT . MP . S . 5 ; ; l l l
Ralston Cherry RAL . CH . S . S l ; l ;Ralston Maple RAL . MP . S . S ; ; ; ; ; l l ; l
Ralston Cherry w/ 5-Piece Drawer Front RAL . CH . S . 5 l ; l ;Ralston Maple w/ 5-Piece Drawer Front RAL . MP . S . 5 ; ; ; ; ; l l ; l
Seneca Ridge Cherry Arch SNR . CH . A . S l lSeneca Ridge Maple Arch SNR . MP . A . S ; ; l l l
Seneca Ridge Red Oak Arch SNR . RO . A . S l lSeneca Ridge Cherry Square SNR . CH . S . S l lSeneca Ridge Maple Square SNR . MP . S . S ; ; ; ; ; l l ; l
Seneca Ridge Red Oak Square SNR . RO . S . S l lSomerton Hill Cherry Arch SMH . CH . A . S l ; l ;Somerton Hill Maple Arch SMH . MP . A . S ; ; ; ; ; l l ; l
Somerton Hill Cherry Square SMH . CH . S . S l ; l ;Somerton Hill Maple Square SMH . MP . S . S ; ; ; ; ; l l ; l
Spring Valley Cherry Arch SVL . CH . A . S l lSpring Valley Hickory Arch SVL . HK . A . S
Spring Valley Maple Arch SVL . MP . A . S ; ; l l lSpring Valley Red Oak Arch SVL . RO . A . S l lSpring Valley Cherry Square SVL . CH . S . S l l
Spring Valley Hickory Square SVL . HK . S . SSpring Valley Maple Square SVL . MP . S . S ; ; ; ; ; l l ; l
Spring Valley Red Oak Square SVL . RO . S . S l lSutton Cliffs Cherry Arch STC . CH . A . S l l
Sutton Cliffs Hickory Arch STC . HK . A . SSutton Cliffs Maple Arch STC . MP . A . S ; ; l l l
Sutton Cliffs Red Oak Arch STC . RO . A . S l lSutton Cliffs Cherry Square STC . CH . S . S l l
Sutton Cliffs Hickory Square STC . HK . S . SSutton Cliffs Maple Square STC . MP . S . S ; ; l l l
Sutton Cliffs Red Oak Square STC . RO . S . S l lTolani Cherry TLN . CH . S . S l lTolani Maple TLN . MP . S . S ; ; l l l
Tolani Red Oak TLN . RO . S . S l lTolani Cherry w/ 3-Piece Drawer TLN . CH . S . 3 l lTolani Maple w/ 3-Piece Drawer TLN . MP . S . 3 l l l
Tolani Red Oak w/ 3-Piece Drawer TLN . RO . S . 3 l lWhitebay II Thermofoil Arch WHB . TH . A . S
Whitebay II Thermofoil Square WHB . TH . S . S
Finish Availability ChartAmaretto – Kona
l Available as standard ; Available at a premium upcharge
B4 Finishes
Fini
shes
Nat
ural
Nat
ural
w/J
ava
Acc
ent
Nat
ural
w/J
ava
Gla
ze
Papr
ika
Papr
ika
w/E
bony
Gla
ze
Peca
n
Sabl
e
Sabl
e w
/Ebo
ny A
ccen
t
Sabl
e w
/Ebo
ny G
laze
Sedo
na
Sedo
na w
/Ebo
ny A
ccen
t
Toffe
e
Toffe
e w
/Jav
a A
ccen
t
Toffe
e w
/ Jav
a G
laze
Whi
te
NANON NAJVA NAJVZ PPNON PPEBZ PCNON SBNON SBEBA SBEBZ SDNON SDEBA TFNON TFJVA TFJVZ WHNONArbor Falls II Thermofoil ABF . TH . S . S l
Avenue Cherry AVE . CH . S . S l lAvenue Maple AVE . MP . S . S l l l l l
Avenue Cherry w/ 5-Piece Drawer Front AVE . CH . S . 5 l ; lAvenue Maple w/ 5-Piece Drawer Front AVE . MP . S . 5 l ; l l ; l l ;
Bayville Cherry BVE . CH . S . 5 l ; lBayville Maple BVE . MP . S . 5 l ; l l ; l l ;
Bellingham Cherry BLH . CH . S . 5 l ; lBellingham Maple BLH . MP . S . 5 l ; l l ; l l ;
Cannonsburg Cherry CSB . CH . S . S l lCannonsburg Maple CSB . MP . S . S l l l l l
Cannonsburg Cherry w/ 5-Piece Drawer Front CSB . CH . S . 5 l ; lCannonsburg Maple w/ 5-Piece Drawer Front CSB . MP . S . 5 l ; l l ; l l ;
Fox Harbor Cherry FXR . CH . S . S l ; lFox Harbor Maple FXR . MP . S . S l ; l l ; l l ;
Fusion Cherry FSN . CH . S . S l lFusion Maple FSN . MP . S . S l l l l l
Glen Arbor Cherry GNA . CH . S . S l lGlen Arbor Maple GNA . MP . S . S l ; l l ; l ; l ;
Glen Arbor Red Oak GNA . RO . S . S l lLaBelle Cherry LBL . CH . S . 5 l ; lLaBelle Maple LBL . MP . S . 5 l ; l l ; l l ;Lariat Cherry LRT . CH . S . 5 l ; lLariat Maple LRT . MP . S . 5 l ; l l ; l l ;
Portrait Cherry PRT . CH . S . S l lPortrait Maple PRT . MP . S . S l l l l
Portrait Red Oak PRT . RO . S . S lPortrait Cherry w/ 5-Piece Drawer Front PRT . CH . S . 5 l lPortrait Maple w/ 5-Piece Drawer Front PRT . MP . S . 5 l l l l
Ralston Cherry RAL . CH . S . S l ; lRalston Maple RAL . MP . S . S l ; l l ; l l ;
Ralston Cherry w/ 5-Piece Drawer Front RAL . CH . S . 5 l ; lRalston Maple w/ 5-Piece Drawer Front RAL . MP . S . 5 l ; l l ; l l ;
Seneca Ridge Cherry Arch SNR . CH . A . S l lSeneca Ridge Maple Arch SNR . MP . A . S l l l l l
Seneca Ridge Red Oak Arch SNR . RO . A . S l lSeneca Ridge Cherry Square SNR . CH . S . S l lSeneca Ridge Maple Square SNR . MP . S . S l ; l l ; l ; l ;
Seneca Ridge Red Oak Square SNR . RO . S . S l lSomerton Hill Cherry Arch SMH . CH . A . S l ; lSomerton Hill Maple Arch SMH . MP . A . S l ; l l ; l l ;
Somerton Hill Cherry Square SMH . CH . S . S l ; lSomerton Hill Maple Square SMH . MP . S . S l ; l l ; l l ;
Spring Valley Cherry Arch SVL . CH . A . S l lSpring Valley Hickory Arch SVL . HK . A . S l
Spring Valley Maple Arch SVL . MP . A . S l l l l lSpring Valley Red Oak Arch SVL . RO . A . S l lSpring Valley Cherry Square SVL . CH . S . S l l
Spring Valley Hickory Square SVL . HK . S . S lSpring Valley Square Maple SVL . MP . S . S l ; l l ; l ; l ;
Spring Valley Red Oak Square SVL . RO . S . S l lSutton Cliffs Cherry Arch STC . CH . A . S l l
Sutton Cliffs Hickory Arch STC . HK . A . S lSutton Cliffs Maple Arch STC . MP . A . S l l l l l
Sutton Cliffs Red Oak Arch STC . RO . A . S l lSutton Cliffs Cherry Square STC . CH . S . S l l
Sutton Cliffs Hickory Square STC . HK . S . S lSutton Cliffs Maple Square STC . MP . S . S l l l l l
Sutton Cliffs Red Oak Square STC . RO . S . S l lTolani Cherry Square TLN . CH . S . S l l
Tolani Maple TLN . MP . S . S l l l l lTolani Red Oak TLN . RO . S . S l l
Tolani Cherry w/ 3-Piece Drawer TLN . CH . S . 3 l lTolani Maple w/ 3-Piece Drawer TLN . MP . S . 3 l l l l l
Tolani Red Oak w/ 3-Piece Drawer TLN . RO . S . 3 l lWhitebay II Thermofoil Arch WHB . TH . A . S l
Whitebay II Thermofoil Square WHB . TH . S . S l
l Available as standard ; Available at a premium upcharge
Finish Availability ChartNatural – White
Cabinet Specifications and Options
C1Cabinet Specifications
Cabinet Specifications
Full Overlay - Concealed Hinges
• Full Overlay doors leave 3/16˝ of the cabinet’s face frame exposed on either side of the doors and 3/8” exposed between doors
• Butt door cabinets have 1/8” reveal between doors• Nickel-finished, self-closing hinges, 6-way adjustable to
allow for perfect alignment• The reveals shown here may vary slightly on some cabinets
due to actual door/drawer front sizes used⁄" reveal
⅜" reveal
top view
side view
⁄" ⁄"
⅜"
⅜" ⅜"
⅜"
⅜"
Traditional Overlay - Concealed Hinges
• Traditional overlay doors leave 7/8” of the cabinet’s face frame exposed on either side of the doors and 1 3/4” exposed between doors
• Butt door cabinets have 1/8” reveal between doors• Nickel-finished, self-closing hinges, 6-way adjustable to
allow for perfect alignment• The reveals shown here may vary slightly on some cabinets
due to actual door/drawer front sizes used ⅞" reveal
1¾" reveal
⅞"
top view
side view
1"
1"
1"
1"
1"
⅞"
Cabi
net S
peci
ficat
ions
and
Opt
ions
C2 Cabinet Specifications
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B15LHDS
Wall and Base Frame Dimensions
• Vertical opening sizes are preceded by an asterisk (*)• Unless otherwise noted, all stiles and rails are 1 1/2” wide• 3” wide vertical stiles divide double door cabinets, +
indicates stiles are removed on butt door cabinets
B30
+3"
+3"
*5"
30"*20 1⁄2"
4 1⁄2"
BD12-3D
*5"
*9 3⁄8"
*9 5⁄8"
B15FH
*27"
BMC27
*17 1⁄2"
*15 7⁄8"
*9 1⁄8"
DSB30 BD12-4D
*5"
*4 3⁄4"
*4 3⁄4"
*8"
1 1⁄2" Countertop
12" 39" 36" 30" 27" 23 1⁄2" 20 1⁄2" 18" 15"
*36"*33"*27"*24"*20 1⁄2"*17 1⁄2"*15"*12"*9"
+3"
Wall Cabinet Heights 42"
*39"
11"
2"
BPPS30-2D
*12"
*12"
2 1⁄2"
1 1⁄2"
1 3⁄4"
34 1⁄2"
1 1⁄2"
1 3⁄4"
Tall Frame Dimensions
• Vertical opening sizes are preceded by an asterisk (*)• Unless otherwise noted, all stiles and rails are 1 1/2” wide• 3” wide vertical stiles divide double door cabinets
3"
2"
*24"
*59 1⁄2"
93"
3"
*59 1⁄2"
*20 1/2"
U1584
90"
3"
2"
*59 1⁄2"
*15"
84"
2"
*27"
96"
2 1⁄2"
*20 1/2"
90"
2"
*15"
84"
Tall Cabinet Heights
3"
2"
*27"
*59 1⁄2"
96"
2"
*24"
93"
4 1⁄2"
79 1⁄2"85 1⁄2"88 1⁄2"91 1⁄2"
*59 1⁄2"*59 1⁄2"*59 1⁄2"*59 1⁄2"
2 1⁄2"
U1590 U1593 U1596 U308424 U309024 U309324 U309624
Cabinet Specifications and Options
C3Cabinet Specifications
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B15LHDS
Oven Cabinet Frame Dimensions
• Vertical opening sizes are preceded by an asterisk (*)• Unless otherwise noted, all stiles and rails are 1 1/2” wide• OCS cabinets with stain have 1 1/2” face frame stiles,
painted finishes have 3” wide, trimmable stiles provide opening width adjustment
• OCU cabinets have 3” wide trimmable vertical stiles provide opening width adjustment
• Substitute_with cabinet’s height
Oven Cabinet Single (OCS)Maximum Opening
*25" (OCS_27B) 28" (OCS_30/B) 31" (OCS_33/B)Minimum Opening21" (OCS_27B)24" (OCS_30/B)27" (OCS_33/B)
*27"*20 ½*15"
3"no center stile on Bu� door cabinets
Maximum Oven Cutout(96") 91 ½"(93) 88 ½"(90") 85 ½"(84) 79 ½"
38"38 ½"
38"MaximumOpening
1 ½"
1 ½"
*20 ½ 3"
Cabinet Width*27" (OCS_27B) 30" (OCS_30/B) 33" (OCS_33/B)
*21" *21 ½"
*21MinimumOpening
*27"*20 ½*15"
3"
*23 ¾"*24 ¼"*23 ¾"
MinimumOpening
Maximum Oven Cutout(96") 91 ½"(93) 88 ½"(90") 85 ½"(84) 79 ½"
Oven Cabinet Universal (OCU)Maximum Opening
21" (OCU_27B)24" (OCU_30/B)27" (OCU_33/B)
*25" (OCU_27B) 28" (OCU_30/B) 31" (OCU_33/B)
1 ½"
1 ½"Cabinet Width
*27" (OCU_27B) 30" (OCU_30/B) 33" (OCU_33/B)
1¾" Rails
D (3
Dra
wers
)
C (2
Dra
wers
)
B (1
Dra
wer)
A (N
o D
rawe
rs)
Max
imum
Ver
tica
l Ope
ning
s
10" Rail
10" Rail
4 ½"
10" Rail
10" Rail
4 ½"
*4 ¾"
*4 ¾"
*4 ¾"
Minimum Opening
no center stile on Bu� door cabinets
no center stile on Bu� door cabinets
84" 60˝
A
Maximum Vertical Openings for OvenCabinet Height B C D
90"
93"
60 ½"
60˝
53 ¾"
54 ¼"
53 ¾"
47 ¼"
47 ¾"
47 ¼"
40 ¾"
41 ¼"
40 ¾"
96" 60˝ 53 ¾" 47 ¼" 40 ¾"
Cabi
net S
peci
ficat
ions
and
Opt
ions
C4 Cabinet Specifications
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B15LHDS
31 1/2” Vanity Frame Dimensions
• Vertical opening sizes are preceded by an asterisk (*)• Unless otherwise noted, all stiles and rails are 1 1/2” wide• 3” wide vertical stiles divide double door cabinets, +
indicates stiles are removed on butt door cabinets
30"
VSB24B
*5"
*17 1⁄2"
4 1⁄2"
27"
VD2118-3D
*5"
*8"
*8"
*20 1⁄2"3"
*5"
1 1⁄2" Countertop
48"*45"
VSB36-2D
*5"
*17 1⁄2"
*5"
3" 3" 3"
4 1⁄2" 4 1⁄2"
VSB42-2D
*5"
*17 1⁄2"
*8"
*8"
VCD3018 DR
*5"
*17 1⁄2" 3"
*5"
VWB2430 VLC1848
+ 311⁄2˝
*8"
*5"
*20 ½˝ *20 ½˝ *20 ½˝ *20 ½˝*4 ¾˝
*4 ¾˝
3"
*45"
*20 ½˝3"
*5"
30"
4 ½˝
*5" *5"
1 ½˝ Countertop
*5" *5"
3" 3" 3"
4 ½˝ 4 ½˝ *5" *5"
*8"
*4 ¾˝
*4 ¾˝
30" 48"
VWB2430 VLC1848
VCD2435 DR VSB3635-2D VSB4235-2D VB2135 VD2135-4D
+ 34 ½˝
34 1/2” Vanity Frame Dimensions • Vertical opening sizes are preceded by an asterisk (*)• Unless otherwise noted, all stiles and rails are 1 1/2” wide• 3” wide vertical stiles divide double door cabinets, +
indicates stiles are removed on butt door cabinets
Cabinet Specifications and Options
C5Cabinet Specifications
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B15LHDS
Office Frame Dimensions • Vertical opening sizes are preceded by an asterisk (*)• Unless otherwise noted, all stiles and rails are 1 1/2” wide
DDR18DKD30
*5"
*5"
*8"
DFD18
*5"
*15"
5 ⁄˝
4 ½˝
24 ½˝
*18"
*39"
BK2460
1 ½˝ Countertop
2"
4 ½˝ 4 ½˝
⁄˝
*3"
60”
29˝5 ⁄˝
Vanity Tall Dimensions • Vertical opening sizes are preceded by an asterisk (*)• Unless otherwise noted, all stiles and rails are 1 1/2” wide
2"
*27"
*59 1⁄2"
96"
21/2"
*20 1/2"
*59 1⁄2"
90"
2"
*15"
*59 1⁄2"
84"
Vanity Linen Cabinet Heights
4 1⁄2"
79 1⁄2"85 1⁄2"91 1⁄2"
VLC1584 VLC1590 VLC1596
Cabi
net S
peci
ficat
ions
and
Opt
ions
C6 Cabinet Specifications
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B15LHDS
Universal Frame Dimensions
• Vertical opening sizes are preceded by an asterisk (*)• Unless otherwise noted, all stiles and rails are 1 1/2” wide• 3” wide vertical stiles divide double door cabinets, +
indicates stiles are removed on butt door cabinets
UB12-3D
*8"
*8"
UBT42
*4 ½˝
UB15FH
27"
UB42FH
*24" *24"
1 1⁄2" Countertop
UB42
+3"
+3"
*5" *5"
*17 ½˝ *17 ½˝
5 ½˝
2" 32 ½˝
Cabinet Specifications and Options
C7Construction Options
Construction OptionsConstruction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
Depending on the door style selected, all Merillat Cabinetry cabinet frames shall be constructed of solid hardwood matched to the door and drawer front specifications.
All veneered components shall be selected from architectural grade hardwood veneer depending on style selected.
SST Construction- - - - - - - - - - - - - - - -K SDT Construction- - - - - - - - - - - - - - - -K PST Construction- - - - - - - - - - - - - - - -K PDT Construction- - - - - - - - - - - - - - - -K ADT Construction- - - - - - - - - - - - - - - -K 09 Depth Modification- - - - - - - - - - -B 12 Depth Modification- - - - - - - - - - -B 15 Depth Modification- - - - - - - - - - -B 18 Depth Modification- - - - - - - - - - -B 21 Depth Modification- - - - - - - - - - -B 24 Depth Modification- - - - - - - - - - -B HDS Half Depth Shelf - - - - - - - - - - - - -D FDS Full Depth Shelf- - - - - - - - - - - - - -D
1ST 1 Standard Tray - - - - - - - - - - - - - -D 2ST 2 Standard Trays - - - - - - - - - - - - -D 3ST 3 Standard Trays - - - - - - - - - - - - -D 4ST 4 Standard Trays - - - - - - - - - - - - -D 6ST 6 Standard Trays - - - - - - - - - - - - -D 1FT 1 Standard Full-Width Tray - - - - -D 2FT 2 Standard Full-Width Trays - - - - -D 2DT 2 Deluxe Trays - - - - - - - - - - - - - - -D 4DT 4 Deluxe Trays - - - - - - - - - - - - - - -D 6DT 6 Deluxe Trays - - - - - - - - - - - - - - -D 2DF 2 Deluxe Full-Width Trays - - - - - -D GD Glass Door - - - - - - - - - - - - - - - - -E PG Prep for Glass Door - - - - - - - - - - -E MG Mullion Glass Door - - - - - - - - - - -E PM Prep for Mullion Glass - - - - - - - - -E PR Prairie Glass Door - - - - - - - - - - - -E PP Prep for Prairie Glass - - - - - - - - - -E MI Matching Interior - - - - - - - - - - - F CFO Cabinet Front Only - - - - - - - - - - -G
a
b
c
c
e
h
j
l
m
q
ab
d
f
g
k
l
m
n
o
p
q
q
r
i
a. Face Frameb. End Panelsc. Wall and Tall Tops and Bottomsd. Base and Vanity Bottomse. Wall Backsf. Tall, Base and Vanity Backsg. Base Corner Gussetsh. Wall and Tall Hang Raili. Base and Vanity Screw Railj. Wall and Tall Shelvesk. Base Shelvesl. Shelf Supports m. Hingesn. Drawer Guideso. Drawer Corep. Toeboard Backerq. Door and Drawer Bumpersr. Back Plugs
K SST
Cabi
net S
peci
ficat
ions
and
Opt
ions
C8 Construction Options
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B15LHDS
Construction Options Chart
Stan
dard
Cons
truc
tion
(SST
)
Stan
dard
Co
nstr
uctio
n w
ithD
ovet
ail D
raw
ers
(SD
T)
Stan
dard
Co
nstr
uctio
n w
ith
Plyw
ood
Ends
(PST
)
Stan
dard
Co
nstr
uctio
n w
ithPl
ywoo
d En
ds a
nd
Dov
etai
l Dra
wer
s(P
DT)
All
Plyw
ood
Cons
truc
tion
with
Dov
etai
l Dra
wer
s(A
DT)
Face Frame Solid Hardwood
Wall, Base and VanityEnd Panels
3/8"Engineered
Wood
3/8”Plywood
Tall End Panels1/2”
EngineeredWood
Wall and Tall Tops
and Bottoms
ytinaV dna esaBBottoms
Ext. Finish:unfinishedInt. Finish:
natural woodgrainlaminate
Ext. Finish:laminate to match doorInt. Finish:
natural woodgrainlaminate
Ext. Finish:unfinishedInt. Finish:
natural woodgrainlaminate
Wall Backs
Ext. Finish:unfinishedInt. Finish:
natural woodgrainlaminate
Base and Vanity Backs
Tall Backs
Base Corner Gussets
15lbs persq. ft
load capacity
3/4”Engineered
Woodw/ Clear
PolycarbonateShelf Supports
Shelves
Hinges Nickel-finished, self-closing, 6-way adjustable hinges
Drawer Guides
3/4 extensionside-mountdrawer slide
system
75 lb load capacity
Full extension,concealed,
undermountslide
system withSoftAction+
Drawer Core/ Drawer Bottom
Core: 1/2”Engineered
WoodBottom:
1/4”Engineered
Wood
Drawers 30”and widerhave 3/8”bottoms
Core: 3/4”Solid
HardwoodBottom:
5.2mm 3-plyPlywood
Toeboard Backer 3/8” Engineered Wood or 1/2” PlywoodToespace - 4 1/2” tall (Universal is 5 1/2” tall ) x 2 25/32” Deep
Roll-Out Trays (ROT) 1/2” Engineered or Solid Wood
3/8"Engineered
Wood
3/8”Plywood 1/2”
Plywood
1/2”Plywood
1/2” Engineered
Wood
1/2” Engineered
Wood
1/2” Engineered
Wood
1/2” Engineered
Wood
Ext. Finish:laminate tomatch doorand frameInt. Finish:
natural woodgrainlaminate
Ext. Finish:laminate tomatch doorand frameInt. Finish:
natural woodgrainlaminate
Ext. Finish:to matchdoor and
frameInt. Finish:
natural woodgrainlaminate
Ext. Finish:laminate to match doorInt. Finish:
natural woodgrainlaminate
Ext. Finish:to matchdoor and
frameInt. Finish:
natural woodgrainlaminate
Ext. Finish:to matchdoor and
frameInt. Finish:
natural woodgrainlaminate
Ext. Finish:unfinishedInt. Finish:
natural woodgrainlaminate
Ext. Finish:unfinishedInt. Finish:
natural woodgrainlaminate
Ext. Finish:unfinishedInt. Finish:
natural woodgrainlaminate
Ext. Finish:laminate to match doorInt. Finish:
natural woodgrainlaminate
Ext. Finish:laminate to match doorInt. Finish:
natural woodgrainlaminate
Ext. Finish:laminate to match doorInt. Finish:
natural woodgrainlaminate
3/8"Engineered
Wood
3/8"Engineered
Wood
3/8"Engineered
Wood
3/8"Engineered
Wood
3/8"Plywood
1/4"Engineered
Wood
1/4"Engineered
Wood
1/4"Engineered
Wood
1/4"Engineered
Wood
1/4"Plywood
1/4”Engineered
Wood (3/8” for
PC and U36)
1/4”Engineered
Wood (3/8” for
PC and U36)
1/4”Engineered
Wood (3/8” for
PC and U36)
1/4”Engineered
Wood (3/8” for
PC and U36)
1/4”Plywood (3/8” for
PC and U36)
3/4”Engineered
Woodw/ Clear
PolycarbonateShelf Supports
3/4”Engineered
Woodw/ Clear
PolycarbonateShelf Supports
3/4”Engineered
Woodw/ Clear
PolycarbonateShelf Supports
11/16”Plywoodw/ Clear
PolycarbonateShelf Supports
3/4 extensionside-mountdrawer slide
system
Full extension,concealed,
undermountslide
system withSoftAction+
Full extension,concealed,
undermountslide
system withSoftAction+
Core: 1/2”Engineered
WoodBottom:
1/4”Engineered
Wood
Core: 3/4”Solid
HardwoodBottom:
5.2mm 3-plyPlywood
Core: 3/4”Solid
HardwoodBottom:
5.2mm 3-plyPlywood
Drawers 30”and widerhave 3/8”
solidhardwood
cleat for extrasupport
Drawers 30”and widerhave 3/8”bottoms
Drawers 30”and widerhave 3/8”
solidhardwood
cleat for extrasupport
Drawers 30”and widerhave 3/8”
solidhardwood
cleat for extrasupport
75 lb load capacity
75 lb load capacity
75 lb load capacity
75 lb load capacity
15lbs persq. ft
load capacity
15lbs persq. ft
load capacity
15lbs persq. ft
load capacity
15lbs persq. ft
load capacity
Ext. Finish:unfinishedInt. Finish:
natural woodgrainlaminate
Ext. Finish:unfinishedInt. Finish:
natural woodgrainlaminate
Ext. Finish:unfinishedInt. Finish:
natural woodgrainlaminate
Ext. Finish:unfinishedInt. Finish:
natural woodgrainlaminate
1/2”Engineered
Wood
1/2”Plywood
1/2”Plywood
1/2” Engineered Wood or PlywoodDadoed and glued to cabinet corners
(SST
)D
etai
ls
(SD
T)D
etai
ls
(PST
)D
etai
ls
(PD
T)D
etai
ls
(AD
T)D
etai
ls
Cabinet Specifications and Options
C9Construction Options
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B15LHDS
Construction Options Diagram
Natural woodgrainlaminate
Drawer
Solid hardwood face frameSolid hardwood face frame
Wall, Base, VanityTall
½˝ ⅜˝
¾˝¾˝
Standard Construction (SST) Plywood Ends with Standard Drawers (PST)
Engineered wood (SST)
1/2” Engineered woodNatural woodgrainlaminate
All Plywood Construction with Dovetail Drawers (ADT)
Natural woodgrainlaminate
Wall, Base, Tall and Vanity
Solid hardwood face frame
Plywood
Stain or paint to match door
and frameDovetailDrawer
¾˝
½˝
Stain or paint
to matchdoor and
frame (PST)
Stain or paint
to matchdoor and
frame (PST)
Laminateto match
door(SST)
Laminateto match
door(SST)
Plywood (PST) Plywood (PST)
Engineered wood (SST)
Natural woodgrainlaminate
Wall, Base, VanityTall
DovetailDrawer
Natural woodgrainlaminate
Solid hardwood face frameSolid hardwood face frame
Engineered wood (SDT)
Plywood (PDT)
5.2mm Plywood
Laminate to match
door(SDT)
Stain or paint to match door
and frame (PDT)
Laminate to match
door (SDT)
Stain or paint to match door
and frame (PDT)
¾˝¾˝
½˝ ⅜˝
Standard Construction with Dovetail Drawers (SDT) Standard Construction with Plywood Ends and Dovetail Drawers (PDT)
Engineered wood (SDT)
Plywood (PDT)
3/4” Solid Hardwood
3/4” Solid Hardwood
Cabi
net S
peci
ficat
ions
and
Opt
ions
C10 Construction Options
Depth Modification
B 9 12 15 18 21 24
• Some cabinets can be reduced or increased in depth to fit design requirements. See specific cabinet information for availability
• When this option is selected, Cabinet Front Only (CFO) is no longer available
• Select trays are not available with this option. See individual cabinets for specific availability
• Cabinets that normally have drawers ordered less than 18” deep will be replaced with a false drawer front only
- 09 @B - 12 @B - 15 @B - 18 @B - 24 @B
Half Depth Shelf
D HDS • 3/4” engineered wood; 11/16” Plywood
if All Plywood Construction with Dovetail Drawers Option (ADT) is selected
• Standard shelf for most base and universal cabinets • Cabinets 27” or wider will have full length support cleat
attached to the underside of the shelf along the front edge
+ HDS @D FDS @D
Full Depth Shelf
D FDS • 3/4” engineered wood; 11/16” Plywood if
All Plywood Construction with Dovetail Drawers Option (ADT) is selected
• Available for most Base and Universal cabinets
• Available with 12”, 15”, 18”, and 21” depth modifications• Note: When selected, replace HDS (10d) with FDS
HDS @D ) FDS @D
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B15LHDS
Cabinet Specifications and Options
C11Construction Options
1 Standard Tray
D 1ST
• Sides and back are 1/2” inch engineered wood with 1/4” engineered wood bottom. Fronts are 3/4” solid hardwood
• Available for most Base and Universal cabinets
• Natural woodgrain laminate• 3/4 extension side mount glide• 75 lb. capacity • Shelves are omitted from cabinets when
ROT options are selected• All Plywood Construction (ADT) have
solid wood roll-out trays (ROT)• Note: Not available on cabinets reduced
to 12” or 15” deep
) 1ST @D 2ST @D 3ST @D 4ST @D 6ST @D 1FT @D 2FT @D 2DT @D 4DT @D 2DF @D 6DT @D
2 Standard Trays
D 2ST
• Sides and back are 1/2” inch engineered wood with 1/4” engineered wood bottom. Fronts are 3/4” solid hardwood
• Available for most Base and Universal cabinets
• Natural woodgrain laminate• 3/4 extension side mount glide• 75 lb. capacity • Shelves are omitted from cabinets when
ROT options are selected• All Plywood Construction (ADT) have
solid wood roll-out trays (ROT)• Note: Not available on cabinets reduced
to 12” or 15” deep
1ST @D ) 2ST @D 3ST @D 4ST @D 6ST @D 1FT @D 2FT @D 2DT @D 4DT @D 2DF @D 6DT @D
3 Standard Trays
D 3ST
• Sides and back are 1/2” inch engineered wood with 1/4” engineered wood bottom. Fronts are 3/4” solid hardwood
• Available for most 3 door, non-Butt door Base cabinets
• Natural woodgrain laminate• 3/4 extension side mount glide• 75 lb. capacity • Shelves are omitted from cabinets when
ROT options are selected• All Plywood Construction (ADT) have
solid wood roll-out trays (ROT)• Note: Not available on cabinets reduced
to 12” or 15” deep
1ST @D 2ST @D ) 3ST @D 4ST @D 6ST @D 1FT @D 2FT @D 2DT @D 4DT @D 2DF @D 6DT @D
4 Standard Trays
D 4ST
• Sides and back are 1/2” inch engineered wood with 1/4” engineered wood bottom. Fronts are 3/4” solid hardwood
• Available for most 2 door, non-Butt door Base and Universal cabinets
• Natural woodgrain laminate• 3/4 extension side mount glide• 75 lb. capacity • Shelves are omitted from cabinets when
ROT options are selected• All Plywood Construction (ADT) have
solid wood roll-out trays (ROT)• Note: Not available on cabinets reduced
to 12” or 15” deep
1ST @D 2ST @D 3ST @D ) 4ST @D 6ST @D 1FT @D 2FT @D 2DT @D 4DT @D 2DF @D 6DT @D
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B15LHDS
Cabi
net S
peci
ficat
ions
and
Opt
ions
C12 Construction Options
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B15LHDS
6 Standard Trays
D 6ST
• Sides and back are 1/2” inch engineered wood with 1/4” engineered wood bottom. Fronts are 3/4” solid hardwood
• Available for most 3 door, non-Butt door Base cabinets
• Natural woodgrain laminate• 3/4 extension side mount glide• 75 lb. capacity • Shelves are omitted from cabinets when
ROT options are selected• All Plywood Construction (ADT) have
solid wood roll-out trays (ROT)• Note: Not available on cabinets reduced
to 12” or 15” deep
1ST @D 2ST @D 3ST @D 4ST @D ) 6ST @D 1FT @D 2FT @D 2DT @D 4DT @D 2DF @D 6DT @D
1 Standard Full-Width Tray
D 1FT
• Standard tray spans the full-width of cabinet
• Sides and back are 1/2” inch engineered wood with 1/4” engineered wood bottom. Fronts are 3/4” solid hardwood
• Available for most Butt door Base and Universal cabinets
• Natural woodgrain laminate• Trays 30” and wider will have a 3/8”
thick engineered wood bottom• 3/4 extension side mount glide• 75 lb. capacity • Shelves are omitted from cabinets when
ROT options are selected• All Plywood Construction (ADT) have
solid wood roll-out trays (ROT)• Note: Not available on cabinets reduced
to 12” or 15” deep
1ST @D 2ST @D 3ST @D 4ST @D 6ST @D ) 1FT @D 2FT @D 2DT @D 4DT @D 2DF @D 6DT @D
2 Standard Full-Width Trays
D 2FT
• Standard tray spans the full-width of cabinet
• Sides and back are 1/2” inch engineered wood with 1/4” engineered wood bottom. Fronts are 3/4” solid hardwood
• Available for most Butt door Base and Universal cabinets
• Natural woodgrain laminate• Trays 30” and wider will have a 3/8”
thick engineered wood bottom• 3/4 extension side mount glide• 75 lb. capacity • Shelves are omitted from cabinets when
ROT options are selected• All Plywood Construction (ADT) have
solid wood roll-out trays (ROT)• Note: Not available on cabinets reduced
to 12” or 15” deep
1ST @D 2ST @D 3ST @D 4ST @D 6ST @D 1FT @D ) 2FT @D 2DT @D 4DT @D 2DF @D 6DT @D
2 Deluxe Trays
D 2DT
• Sides, front and back, are 1/2” solid hardwood with 3-ply 5.2mm thick plywood bottom panel
• 1 15/16” deep scalloped finger pull cut out
• Available for most Base and Universal cabinets
• Natural finish• 3/4 extension side mount glide• 75 lb. capacity • Shelves are omitted from cabinets when
ROT options are selected• Note: Only available in 24” deep cabinets
1ST @D 2ST @D 3ST @D 4ST @D 6ST @D 1FT @D 2FT @D ) 2DT @D 4DT @D 2DF @D 6DT @D
Cabinet Specifications and Options
C13Construction Options
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B15LHDS
4 Deluxe Trays
D 4DT
• Sides, front and back, are 1/2” solid hardwood with 3-ply 5.2mm thick plywood bottom panel
• 1 15/16” deep scalloped finger pull cut out
• Available for most 2 door, non-Butt door Base and Universal cabinets
• Natural finish• 3/4 extension side mount glide• 75 lb. capacity • Shelves are omitted from cabinets when
ROT options are selected• Note: Only available in 24” deep cabinets
1ST @D 2ST @D 3ST @D 4ST @D 6ST @D 1FT @D 2FT @D 2DT @D ) 4DT @D 2DF @D 6DT @D
6 Deluxe Trays
D 6DT
• Sides, front and back, are 1/2” solid hardwood with 3-ply 5.2mm thick plywood bottom panel
• 1 15/16” deep scalloped finger pull cut out
• Available for most 3 door, non-Butt door Base cabinets
• Natural finish• 3/4 extension side mount glide• 75 lb. capacity • Shelves are omitted from cabinets when
ROT options are selected• Note: Only available in 24” deep cabinets
1ST @D 2ST @D 3ST @D 4ST @D 6ST @D 1FT @D 2FT @D 2DT @D 4DT @D 2DF @D ) 6DT @D
2 Deluxe Full-Width Trays
D 2DF
• Deluxe tray spans the full-width of cabinet
• Sides, front and back, are 1/2” solid hardwood with 3-ply 5.2mm thick plywood bottom panel
• 1 15/16” deep scalloped finger pull cut out
• Available for most Butt door Base and Universal cabinets
• Natural finish• 3/4 extension side mount glide• 75 lb. capacity • Shelves are omitted from cabinets when
ROT options are selected• Note: Only available in 24” deep cabinets
1ST @D 2ST @D 3ST @D 4ST @D 6ST @D 1FT @D 2FT @D 2DT @D 4DT @D ) 2DF @D 6DT @D
Tolani 24” wide Butt door PR
PP
Cabi
net S
peci
ficat
ions
and
Opt
ions
C14 Construction Options
Glass Doors
E With Glass GD Prepared for Glass Insert PG
• 1/8” removable tempered glass with GD option. No glass with PG option
• Available for select wall cabinets• Note: Available for the following
door styles: Bayville, Bellingham, Cannonsburg, Fox Harbor, Fusion, Glen Arbor, LaBelle, Lariat, Ralston and Tolani
• Note: Mitered door styles cannot be field modified for glass
• Note: Optional Door Insert Retaining Strip (DIRS) sold separately for use with PG option
) GD @E ) PG @E MG @E PM @E PR @E PP @E
GD PG
Mullion Glass Door
E With Glass MG Prepared for Glass Insert PM
• 1/8” removable tempered glass with MG option. No glass with PM option
• Mullions are equally divided• Available for select wall cabinets• Note: Available on the following door
styles: Arbor Falls II, Fox Harbor, Glen Arbor, Ralston, Seneca Ridge Arch, Seneca Ridge Square, Somerton Hill Arch, Somerton Hill Square, Spring Valley Arch, Spring Valley Square, Sutton Cliffs Arch, Suttons Cliffs Square, Whitebay II Arch and Whitebay II Square
• Note: Mitered door styles cannot be field modified for glass
• Note: Optional Door Insert Clips (DIC) sold separately for use with PM option, Whitebay and Arbor Falls only
• Note: Optional Door Insert Retaining Strip (DIRS) sold separately for use with PM option, used with all door styles except Arbor Falls II and Whitebay II
GD @E PG @E ) MG @E ) PM @E PR @E PP @E
18” high24˝ high30˝ high36˝ high 42˝ high
2x22x22x32x42x4
NA 3x23x33x43x4
Lite Configuration
15”, 18”wide
21”, 24”wideMG
PM
Prairie Glass Door
E With Glass PR Prepared for Glass Insert PP
• 1/8” removable tempered glass with PR option. No glass with PP option
• Available for select wall cabinets• Note: Available on the following door
styles: Avenue, Portrait and Tolani• Note: Optional Door Insert Retaining
Strip (DIRS) sold separately for use with PP option
GD @E PG @E MG @E PM @E ) PR @E ) PP @E
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B15LHDS
Cabinet Specifications and Options
C15Construction Options
Matching Interior
F MI • Matching interior option
affects: -End Panels -Shelves -Tops and Bottoms -Back Panel• Interior surfaces are easy clean laminate• Note: Option only available in combination with cabinets
with glass door options (GD, MD, PR) or a Prepared for Glass Door (PG, PM, PP) option is selected
) MI @F CFO @G
End panel
MatchingInterior
Solid hardwoodface frame
Cabinet Front Only
G CFO • Front frame and appropriate doors and
drawer fronts only• Note: Cannot be combined with any
depth modifications, tray or shelf options
MI @F ) CFO @G
Drawer Front
J 3 5
• 3 piece drawer front is only available in Tolani• 5 piece drawer front is only available in Avenue,
Cannonsburg, Portrait Cherry and Maple, and Ralston3-Piece
5-Piece
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B15LHDS
Cabi
net S
peci
ficat
ions
and
Opt
ions
C16 Construction Options
Notes
Wall Cabinets
D1Wall Cabinets
Wall Cabinets
Note: Standard wall cabinet box depth is 12˝ unless stated otherwise. Add door thickness with bumpers for total depth.
Caution: Installation of a wall cabinet 30˝ or wider requires additional support, such as attachment to a soffit, or support from below. Failure to provide additional support could result in collapse of the cabinet, serious personal injury, or property damage. Damage relating to failure to provide additional support is not covered by the limited warranty. See inside cover for warranty details
Any wall cabinet over 24” wide or 30” high with a depth greater than 12” and/or butt doors must be installed between two cabinets, a cabinet and a wall, or supported from below. Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
SST Construction - - - - - - - - - - - - - - - -K SDT Construction - - - - - - - - - - - - - - - -K PST Construction - - - - - - - - - - - - - - - -K PDT Construction - - - - - - - - - - - - - - - -K ADT Construction - - - - - - - - - - - - - - - -K 09 Depth Modification - - - - - - - - - - -B 15 Depth Modification - - - - - - - - - - -B 18 Depth Modification - - - - - - - - - - -B 21 Depth Modification - - - - - - - - - - -B 24 Depth Modification - - - - - - - - - - -B GD Glass Door - - - - - - - - - - - - - - - - -E PG Prep for Glass Door - - - - - - - - - - -E MG Mullion Glass Door - - - - - - - - - - -E PM Prep for Mullion Glass - - - - - - - - -E PR Prairie Glass Door - - - - - - - - - - - -E PP Prep for Prairie Glass - - - - - - - - - -E MI Matching Interior - - - - - - - - - - - F CFO Cabinet Front Only - - - - - - - - - - -G
A C F W1830 L CFO
Wall Single Door
A C Specify R or L
18” High& W2418 R or L 23 1/2” High& W1224 R or L W1524 R or L W1824 R or L W2124 R or L W2424 R or L 30” High& W930 R or L& W1230 R or L W1530 R or L W1830 R or L W2130 R or L W2430 R or L 36” High& W936 R or L& W1236 R or L W1536 R or L W1836 R or L W2136 R or L W2436 R or L
A C Specify R or L
39” High& W939 R or L& W1239 R or L W1539 R or L W1839 R or L W2139 R or L W2439 R or L 42” High& W942 R or L& W1242 R or L W1542 R or L W1842 R or L W2142 R or L W2442 R or L
• 18” high cabinets have no shelves
• 23 1/2” cabinets have one adjustable shelf
• 30” high cabinets have two adjustable shelves
• 36” - 42” high cabinets have three adjustable shelves
- Matching Interior (MI) option only available when a glass door (GD, MG, PR) or a Prepared for Glass Door (PG, PM, PP) option is selected
- Glass (GD), Prepared for Glass (PG), Mullion (MG), Prepared for Mullion Glass (PM), Prairie (PR) and Prepared for Prairie (PP) options are available on select door styles. See Construction Options for specifics
• Actual height of 24” cabinet is 23 1/2”
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K ) 09 @B ) 15 @B ) 18 @B ) 21 @B
) 24 @B - GD @E - PG @E - MG @E - PM @E - PR @E - PP @E - MI @F ) CFO @G
18˝
12˝
W2418
12˝
23 ½˝ W1224 - W2424
30˝
12˝
W930 - W2430
36˝39˝42˝
12˝
W936 - W2442
& Not available with Glass (GD), Prepared for Glass (PG), Mullion (MG), Prepared for Mullion Glass (PM), Prairie (PR) and Prepared for Prairie (PP) glass options or Matching Interior (MI)
Gray color coding indicates new product, size or code.
Construction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
Wal
l Cab
inet
s
D2 Wall Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . W1830LCFO
Wall Double Door
A 12” High W2712B W3012 W3012B W3312 W3312B W3612 W3612B W3912 W4212 W4512 W4812 15” High W2715B W3015 W3015B W3315 W3315B W3615 W3615B W3915 W4215 W4515 W4815 18” High W2418B W2718B% W3018% W3018B W3318 W3318B% W3618% W3618B W3918 W4218 W4518 W4818 20 1/2” High W3021 W3021B W3321 W3321B W3621 W3621B W3921 W4221 23 1/2” High% W2424B W2724B% W3024% W3024B W3324 W3324B% W3624% W3624B W3924 W4224 W4524 W4824
A 27” High W3027 W3027B W3327 W3327B W3627 W3627B W3927 W4227 30” High% W2430B W2730B% W3030% W3030B% W3330% W3330B% W3630% W3630B W3930 W4230 W4530 W4830 36” High% W2436B W2736B% W3036% W3036B% W3336% W3336B% W3636% W3636B W3936 W4236 39” High% W2439B W2739B% W3039B% W3339B% W3639B W3939 W4239 42” High% W2442B W2742B% W3042% W3042B% W3342% W3342B% W3642% W3642B W3942 W4242
• 12” - 20 1/2” high cabinets have no shelves
• 23 1/2” and 27” high cabinets have one adjustable shelf
• 30” high cabinets have two adjustable shelves
• 36” - 42” high cabinets have three adjustable shelves
• Cabinets with a “B” suffix have BUTT doors without a center frame stile
- Matching Interior (MI) option only available when a glass door (GD, MG, PR) or a Prepared for Glass Door (PG, PM, PP) option is selected
- Glass (GD), Prepared for Glass (PG), Mullion (MG), Prepared for Mullion Glass (PM), Prairie (PR) and Prepared for Prairie (PP) options are available on select door styles. See Construction Options for specifics
• Actual height of 21” cabinet is 20 1/2” • Actual height of 24” cabinet is 23 1/2”
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K ) 09 @B ) 15 @B ) 18 @B ) 21 @B
) 24 @B - GD @E - PG @E - MG @E - PM @E - PR @E - PP @E - MI @F ) CFO @G
12˝
12˝15˝18˝
20 ½˝
W2712B - W4221
12˝
23 ½˝27˝
W2424B - W4227
30˝
12˝ W2430B -
W4830
36˝39˝42˝
12˝ W2436B - W4242
% Available with Mullion (MG), Prep for Mullion Glass (PM), Prairie (PR), Prep for Prairie (PP), Glass (GD), and Prep for Glass (PG) options
Gray color coding indicates new product, size or code.
Wall Cabinets
D3Wall Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . W1830LCFO
Wall Refrigerator
A 12” High WR3012 WR3012B WR3312 WR3312B WR3612 WR3612B WR3912 WR4212 15” High WR3015 WR3015B WR3315 WR3315B WR3615 WR3615B WR3915
A 18” High% WR3018% WR3018B WR3318 WR3318B% WR3618% WR3618B WR3918 WR4218 23 1/2” High% WR3624% WR3624B WR3924 WR4224 27” High WR3627 WR3627B WR3927
• Designed for use over refrigerators where there is adequate clearance
• 12” - 23 1/2” high cabinets have no shelves
• 27” high cabinets have one adjustable shelf
• Cabinets with a “B” suffix have BUTT doors without a center frame stile
- Glass (GD), Prepared for Glass (PG), Mullion (MG), Prepared for Mullion Glass (PM), Prairie (PR) and Prepared for Prairie (PP) options are available on select door styles. See Construction Options for specifics
• Actual height of 24” cabinet is 23 1/2”
? Caution: Additional support is required. See installation sheet provided with cabinet or the Merillat Framed Cabinet Installation Guide
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B 15 @B 18 @B 21 @B
24 @B - GD @E - PG @E - MG @E - PM @E - PR @E - PP @E - MI @F ) CFO @G
24˝
12˝15˝18˝
23 ½˝
WR3012 -WR4224
27˝
24˝WR3627 -WR3927
% Available with Mullion (MG), Prep for Mullion Glass (PM), Prairie (PR), Prep for Prairie (PP), Glass (GD), and Prep for Glass (PG) options
Gray color coding indicates new product, size or code.
Peninsula Wall Single Door
A 18” High PW2418 23 1/2” High% PW1824 PW2124 PW2424 30” High% PW1830 PW2130 PW2430
• 18” high cabinet have no shelves
• 23 1/2” cabinets have one adjustable shelf
• 30” high cabinets have two adjustable shelves
• Reversible for left or right hinging
• Each side has one door hinged at the same end of cabinet
- Matching Interior (MI) option only available when a glass door (GD, MG, PR) or a Prepared for Glass Door (PG, PM, PP) option is selected
- Glass (GD), Prepared for Glass (PG), Mullion (MG), Prepared for Mullion Glass (PM), Prairie (PR) and Prepared for Prairie (PP) options are available on select door styles. See Construction Options for specifics
• Actual height of 24” cabinet is 23 1/2”
? Peninsula Wall Cabinets must be installed against a soffit, ceiling or supported by a countertop. See Cabinet installation guide for
specific instructions
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B 15 @B 18 @B 21 @B
24 @B - GD @E - PG @E - MG @E - PM @E - PR @E - PP @E - MI @F CFO @G
PW2418
18˝
12 /˝(excluding doors)
30˝
12 /˝(excluding doors)
PW1824 - PW2424
23 ½˝
12 /˝(excluding doors)
PW1830 - PW2430
% Available with Mullion (MG), Prep for Mullion Glass (PM), Prairie (PR), Prep for Prairie (PP), Glass (GD), and Prep for Glass (PG) options
Wal
l Cab
inet
s
D4 Wall Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . W1830LCFO
Peninsula Wall Double Door
A 18” High& PW2418B PW3018 PW3018B PW3618 PW3618B 23 1/2” High& PW2424B PW3024 PW3024B PW3624 PW3624B 30” High& PW2430B PW3030 PW3030B PW3630 PW3630B
• 18” high cabinets have no shelves
• 23 1/2” cabinets have one adjustable shelf
• 30” high cabinets have two adjustable shelves
• Cabinets with a “B” suffix have BUTT doors without a center frame stile
• Each side has two doors - Matching Interior (MI)
option only available when a glass door (GD, MG, PR) or a Prepared for Glass Door (PG, PM, PP) option is selected
- Glass (GD), Prepared for Glass (PG), Mullion (MG), Prepared for Mullion Glass (PM), Prairie (PR) and Prepared for Prairie (PP) options are available on select door styles. See Construction Options for specifics
• Actual height of 24” cabinet is 23 1/2”
? Peninsula Wall Cabinets must be installed against a soffit, ceiling or supported by a countertop. See Cabinet installation guide for
specific instructions
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B 15 @B 18 @B 21 @B
24 @B - GD @E - PG @E - MG @E - PM @E - PR @E - PP @E - MI @F CFO @G
18˝
12/˝(excluding doors)
PW2418 - PW3618B
23 ½˝
12/˝(excluding doors)
PW2424B - PW3624B
30˝
12/˝(excluding doors)
PW2430B - PW3630B
& Not available with Glass (GD), Prepared for Glass (PG), Mullion (MG), Prepared for Mullion Glass (PM), Prairie (PR) and Prepared for Prairie (PP) glass options or Matching Interior (MI)
Gray color coding indicates new product, size or code.
Wall Cabinets
D5Wall Corner Cabinets
Wall Corner CabinetsConstruction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
SST Construction - - - - - - - - - - - - - - - -K SDT Construction - - - - - - - - - - - - - - - -K PST Construction - - - - - - - - - - - - - - - -K PDT Construction - - - - - - - - - - - - - - - -K ADT Construction - - - - - - - - - - - - - - - -K 09 Depth Modification - - - - - - - - - - -B 15 Depth Modification - - - - - - - - - - -B 18 Depth Modification - - - - - - - - - - -B 21 Depth Modification - - - - - - - - - - -B 24 Depth Modification - - - - - - - - - - -B
GD Glass Door - - - - - - - - - - - - - - - - -E PG Prep for Glass Door - - - - - - - - - - -E MG Mullion Glass Door - - - - - - - - - - -E PM Prep for Mullion Glass - - - - - - - - -E PR Prairie Glass Door - - - - - - - - - - - -E PP Prep for Prairie Glass - - - - - - - - - -E MI Matching Interior - - - - - - - - - - - F CFO Cabinet Front Only - - - - - - - - - - -G
A WBC30/3330BR
Wall Blind Corner Cabinet Information
• Wall blind corner cabinets provide access to corner space and permits adjustability of up to 2 7/8” maximum to aid in kitchen cabinet layout. Consult chart for “pull” dimensions and minimum wall space requirements.
• “Pulling” the cabinet away from the corner (2 7/8” maximum), and using the supplied filler and panel provides clearance for opening doors when decorative hardware is used.
• BR or BL indicates blind end of cabinet. Please specify.• Door hinged on same side as blind.• Square door cabinets may be changed from right to left by inverting cabinet. • Arch door cabinets cannot be inverted and must be ordered blind right or blind left. • Overlays (OL) available for all full overlay door styles except Fusion. Order separately.
Overlays are used to cover the exposed filler and frame. This provides a continuous door appearance. Overlays must be field cut (mitered) to required width determined by cabinet “pull”. See Filler Overlay Detail below.
• Note: A 3” Wall Filler and Blind Panel is included with each WBC cabinet ordered, shipped unattached.
Filler Overlay Detail Full Overlay Door Styles
No Pull Line
1” Pull
Blind Panel
3” Filler
WBCDoor
Adjoining Cabinet Door
Overlay
12 /˝
30˝
Peninsula Wall Blind Corner Cabinet
(excluding doors)Blind Right (BR) shown
3˝ Filler
12˝
12 /˝
Maximum Wall26 /˝
Minimum Wall24˝
Adjoining Cabinet
Peninsula Blind Corner
Wall Blind
Corner
(C)Frame
Opening
Partial Overlay
(B) Cabinet
Width
24"
27"
30"
33"
36"
42"
48"
24"
24"
24"
27"
30"
33"
36"
42"
48"
NoPull
MaxPull
26 /"
29 /"
32 /"
35 /"
38 /"
44 /"
50 /"
26 /"
NoPull
1 /"
1 /"
1 /"
1 /"
1 /"
1 /"
1 /"
MaxPull
4 ½"
4 ½"
4 ½"
4 ½"
4 ½"
4 ½"
4 ½"
(A)Wall Space
(D) Door Hardware Clearance
(C)Frame
Opening
Full Overlay
(B) Cabinet
Width
24"
27"
30"
33"
36"
42"
48"
24"
24"
24"
27"
30"
33"
36"
42"
48"
NoPull
MaxPull
26 /"
29 /"
32 /"
35 /"
38 /"
44 /"
50 /"
26 /"
NoPull
MaxPull
(A)Wall Space
(D) Door Hardware Clearance
/"
/"
/"
/"
/"
/"
/"
/"
3 /"
3 /"
3 /"
3 /"
3 /"
3 /"
3 /"
3 /"
7 ½"
10 ½"
13 ½"
16 ½"
19 ½"
10 ½", 12"
13 ½", 15"
7 ½"
7 ½"
10 ½"
13 ½"
16 ½"
19 ½"
10 ½", 12"
13 ½", 15"
7 ½"
WBC24/27
WBC27/30
WBC30/33
WBC33/36
WBC36/39
WBC42/45
WBC48/51
PWBC24/27 1 /" 4 ½"
Wall Blind Corner
AB
D
C
WBC Cabinet (Blind Right)
Filler and Panel
AdjoiningCabinet
Frame Opening
0˝ to
2 /˝
Wall Blind Corner CabinetBlind Right (BR) shown
Wal
l Cab
inet
s
D6 Wall Corner Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . WBC30/3330BR
Wall Blind Corner Single Door
A Specify BR or BL
23 1/2” High WBC27/3024 BR or BL WBC36/3924 BR or BL 30” High WBC24/2730 BR or BL WBC27/3030 BR or BL WBC30/3330 BR or BL WBC33/3630 BR or BL WBC36/3930 BR or BL 36” High WBC24/2736 BR or BL WBC27/3036 BR or BL WBC30/3336 BR or BL WBC36/3936 BR or BL 39” High WBC24/2739 BR or BL WBC27/3039 BR or BL WBC30/3339 BR or BL WBC36/3939 BR or BL 42” High WBC24/2742 BR or BL WBC27/3042 BR or BL WBC30/3342 BR or BL WBC36/3942 BR or BL
• 23 1/2” cabinets have one adjustable shelf
• 30” high cabinets have two adjustable shelves
• 36” - 42” high cabinets have three adjustable shelves
• Door hinged to frame center stile
• Do not pull cabinet more than 2 7/8” from corner
• Blind Panel with 3” filler included, shipped unattached
• Overlays (OL) available for all full overlay door styles except Fusion. Order separately
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K ) 09 @B ) 15 @B ) 18 @B ) 21 @B
) 24 @B GD @E PG @E MG @E PM @E PR @E PP @E MI @F ) CFO @G
23 ½˝
12˝WBC27/3024 WBC36/3924
30˝
12˝WBC24/2730 - WBC36/3930
36˝39˝42˝
12˝WBC24/2736 - WBC36/3942
Blind Right (BR) shown
Gray color coding indicates new product, size or code.
Wall Blind Corner Double Door
A Specify BR or BL WBC42/4530 BR or BL WBC48/5130 BR or BL
• Two adjustable shelves• Two different width
doors; the narrower is located next to the blind panel
• Do not pull cabinet more than 2 7/8” from corner
• Blind Panel with 3” filler included, shipped unattached
• Overlays (OL) available for all full overlay door styles except Fusion. Order separately
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K ) 09 @B ) 15 @B ) 18 @B ) 21 @B
) 24 @B GD @E PG @E MG @E PM @E PR @E PP @E MI @F ) CFO @G
30˝
12˝
Blind Right (BR) shown
Peninsula Wall Blind Corner
A Specify BR or BL PWBC24/2730 BR or BL
• Two adjustable shelves• Three doors; one front,
two back. Door hinged to frame center stile on blind side
• Do not pull cabinet more than 2 7/8” from corner
• Blind Panel with 3” filler included, shipped unattached
• Overlays (OL) available for all full overlay door styles except Fusion. Order separately
? Peninsula Wall Cabinets must be installed against a soffit, ceiling or supported by a countertop. See Cabinet installation guide for
specific instructions
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B 15 @B 18 @B 21 @B
24 @B GD @E PG @E MG @E PM @E PR @E PP @E MI @F CFO @G12 /˝
30˝
(excluding doors)Blind Right (BR) shown
Left Hand shown
17˝
12˝
24˝
24 /˝
Kitchen Side
Dining Room Side
12 /˝
WallCabinet
Left -HandPeninsula
Wall AngleCabinet
PeninsulaWall
Cabinet
17˝
12˝
Right Hand shown
24˝
24 /˝
Kitchen Side
Dining Room Side
12 /˝
WallCabinet
Right -HandPeninsula
Wall AngleCabinet
PeninsulaWall
Cabinet
30˝
Left Hand shown
30˝
WA2430-WA2730
36˝39˝42˝
WA2436 - WA2742
17"
24"
24"
12"
12"
WA24_ _
17"
27"
27"
15"
15"
WA27_ _
Wall Cabinets
D7Wall Corner Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . WBC30/3330BR
Wall Angle Single Door
A C Specify R or L
30” High WA2430 R or L WA2730 R or L 36” High WA2436 R or L WA2736 R or L 39” High WA2439 R or L WA2739 R or L 42” High WA2442 R or L WA2742 R or L
• 30” high cabinets have two adjustable shelves
• 36” - 42” high cabinets have three adjustable shelves
• Back corner removed for easy installation
• Full and Traditional overlay door widths are similar to avoid interference with adjacent cabinet doors
• Adjacent cabinets can be installed directly without fillers
- Matching Interior (MI) option only available when a glass door (GD, MG, PR) or a Prepared for Glass Door (PG, PM, PP) option is selected
- Glass (GD), Prepared for Glass (PG), Mullion (MG), Prepared for Mullion Glass (PM), Prairie (PR) and Prepared for Prairie (PP) options are available on select door styles. See Construction Options for specifics
• Overlays (OL) available for all full overlay door styles except Fusion. Order separately
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B 15 @B 18 @B 21 @B
24 @B - GD @E - PG @E - MG @E - PM @E - PR @E - PP @E - MI @F ) CFO @G
Gray color coding indicates new product, size or code.
Peninsula Wall Angle
A C Specify R or L PWA2430 R or L
• Two adjustable shelves• R or L designates dining
room side door hinging• Stile on dining room
frame is extra wide to clear window or door molding
• Full and Traditional overlay door widths are similar to avoid interference with adjacent cabinet doors
• Adjacent cabinets can be installed directly without fillers
• Requires 24 1/16” of wall space excluding dining room side cabinet door
? Peninsula Wall Cabinets must be installed against a soffit, ceiling or supported by a countertop. See Cabinet installation guide for
specific instructions
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B 15 @B 18 @B 21 @B
24 @B GD @E PG @E MG @E PM @E PR @E PP @E MI @F CFO @G
30˝
12˝ 12˝
36˝39˝42˝
12˝ 12˝
Plan View of Adjustable Shelf
13 /˝ (Front)
9 /˝9 /˝12˝
12˝ 45°
WCA1230 WCA1236 - WCA1242
30˝
36˝39˝42˝
12˝
WEZR2430
WEZR2436 - WEZR2442
24"
24"
12"
12"
12"
Wal
l Cab
inet
s
D8 Wall Corner Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . WBC30/3330BR
Wall Easy Reach
A C Specify R or L
30” High WEZR2430 R or L 36” High WEZR2436 R or L 39” High WEZR2439 R or L 42” High WEZR2442 R or L
• 30” high cabinets have two adjustable shelves
• 36” - 42” high cabinets have three adjustable shelves
• Two piece bi -fold door with independent adjustment
• 168º hinge opening• Back corner removed for
easy installation
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B 15 @B 18 @B 21 @B
24 @B GD @E PG @E MG @E PM @E PR @E PP @E MI @F ) CFO @G
Gray color coding indicates new product, size or code.
Wall Corner Angle
A C Specify R or L
30” High WCA1230 R or L 36” High WCA1236 R or L 39” High WCA1239 R or L 42” High WCA1242 R or L
• For use at end of cabinet run or in a corner
• 30” high cabinets have two adjustable shelves
• 36” - 42” high cabinets have three adjustable shelves
- Matching Interior (MI) option only available when a glass door (GD, MG, PR) or a Prepared for Glass Door (PG, PM, PP) option is selected
- Glass (GD), Prepared for Glass (PG), Mullion (MG), Prepared for Mullion Glass (PM), Prairie (PR) and Prepared for Prairie (PP) options are available on select door styles. See Construction Options for specifics
- SDT, PST and PDT orderable; shipped as SST
+ SST @K - SDT @K - PST @K - PDT @K ) ADT @K 09 @B 15 @B 18 @B 21 @B
24 @B - GD @E - PG @E - MG @E - PM @E - PR @E - PP @E - MI @F ) CFO @G
Gray color coding indicates new product, size or code.
30˝
36˝39˝42˝
12"
8 /˝
8 /˝12"
143°
63½°
11 /˝
WEC1230
WEC1236 - WEC1242
Wall Cabinets
D9Wall Corner Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . WBC30/3330BR
Wall End Corner
A 30” High WEC1230 36” High WEC1236 39” High WEC1239 42” High WEC1242
• 30” high cabinets have two adjustable shelves
• 36” - 42” high cabinets have three adjustable shelves
• For use at end of cabinet run or in a corner
• Can be installed on either right or left end of run or in a corner
• Two doors- SDT, PST and PDT
orderable; shipped as SST
+ SST @K - SDT @K - PST @K - PDT @K ) ADT @K 09 @B 15 @B 18 @B 21 @B
24 @B GD @E PG @E MG @E PM @E PR @E PP @E MI @F ) CFO @G
Gray color coding indicates new product, size or code.
12˝
12˝
12˝ BK3012 - BK3612
12˝
23 ½˝
BK1524 - BK2424
BK1530 - BK2430
BK1536 - BK2448
BK1854 - BK2460
30˝
12˝
36˝39˝42˝48˝
12˝
54˝60˝
18˝
Wal
l Cab
inet
s
D10 Wall Open Cabinets
Wall Open CabinetsConstruction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not availableCaution: Bookcases are typically subjected to extreme weight. Additional support is required. Wall hung applications must be limited to 15 lbs. per square foot of shelf area; not to exceed 50 lbs. per shelf.
Specifications subject to change without notice.
SST Construction - - - - - - - - - - - - - - - -K SDT Construction - - - - - - - - - - - - - - - -K PST Construction - - - - - - - - - - - - - - - -K PDT Construction - - - - - - - - - - - - - - - -K ADT Construction - - - - - - - - - - - - - - - -K 09 Depth Modification - - - - - - - - - - -B 15 Depth Modification - - - - - - - - - - -B 18 Depth Modification - - - - - - - - - - -B 21 Depth Modification - - - - - - - - - - -B 24 Depth Modification - - - - - - - - - - -B
A BK3012
Bookcase Cabinets
A 12” High BK3012 BK3612 24” High BK1524 BK1824 BK2124 BK2424 30” High BK1530 BK1830 BK2130 BK2430 36” High BK1536 BK1836 BK2136 BK2436 39” High BK1539 BK1839 BK2139 BK2439
A 42” High BK1542 BK1842 BK2142 BK2442 48” High BK1848 BK2148 BK2448 54” High BK1854 BK2154 BK2454 60” High BK1860 BK2160 BK2460
• 12” high bookcases have no shelves
• 24” high bookcases have one adjustable shelf
• 30” high bookcases have two adjustable shelves
• 36” - 42” high bookcases have three adjustable shelves
• 54” and 60” high bookcases have one fixed bottom shelf and 3 adjustable shelves
• 12” high bookcases not available in Hickory door styles• 54” and 60” high bookcases are designed to mount on a
countertop and must be secured to the wall• Matching laminate interior• Except for White, all finishes including Chiffon and
Cotton are only available in Standard Construction with Plywood Ends (PST, PDT) or All Plywood Construction (ADT). Orderable as SST and SDT but will ship as PST
• White only available in Standard Construction (SST and SDT)
• Maple Accent Glaze shipped standard finish• Vertical wood grain back panel; except Chiffon, Cotton
and White • Includes low profile clear polycarbonate shelf supports in
addition to hold -down style supports used for shipping• Actual height of 24” cabinet is 23 1/2”
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K ) 09 @B
) 15 @B ) 18 @B ) 21 @B ) 24 @B
Gray color coding indicates new product, size or code.
Wall Cabinets
D11Wall Open Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . BK3012
Solid Wood Wall End Open Shelf
A SWEOS30 SWEOS36 SWEOS42
• Solid wood shelves and top• 5/8” thick fixed shelves and top• 30” high has three shelves with equal
spacing of 9 1/8” high• 36” high has four shelves with equal
spacing of 8 3/16” high• 42” high has four shelves with equal
spacing of 9 11/16” high• Invertible for right or left hand use• 6 3/16” wide x 12” deep with 5 3/4”
long 45 degree angle cut front corner on shelves
• Trimmable to 5 7/8” wide• Back not finished• Available in all finishes; Maple Accent Glaze shipped standard finish• Chiffon, Cotton and White ends are solid maple with painted finish,
glaze shipped standard finish• End and back panels are 3/16” with veneered plywood finish on
exposed surfaces • One per carton
SST @K SDT @K PST @K PDT @K ADT @K 09 @B
15 @B 18 @B 21 @B 24 @B
30˝36˝42˝
6 /˝ 12 ˝
Wall China Display
A WCD3015 13 Plates WCD3615 16 Plates
• Matching laminate interior• Vertical wood grain back panel;
except Chiffon, Cotton and White • Plate spindles finished to match• Chiffon, Cotton and White plate
racks are painted Maple• Plate spindles are not removable• Each plate opening is 1 5/8” wide x
11 1/4” deep x 11 1/2” high
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B
15 @B 18 @B 21 @B 24 @B
15˝
12˝
Wall Lattice
A 15” High WL3015 11 Bottles 30” High WL1530 11 Bottles
• Matching laminate interior• Vertical wood grain back panel;
except Chiffon, Cotton and White • Lattice finished to match• Chiffon, Cotton and White lattice are
painted Maple• Lattice is not removable• 4” x 4” bottle openings
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B
15 @B 18 @B 21 @B 24 @B
12˝ 30˝
15˝
WL3015 (horizontal)
30˝
12˝ 15˝
WL1530 (vertical)
Wall Wine Rack Scalloped
A 15” High WRS3015 14 Bottles WRS3615 16 Bottles 18” High WRS3018 14 Bottles WRS3618 16 Bottles 30” High WRS1530 12 Bottles WRS1830 16 Bottles WRS2430 20 Bottles
• Matching laminate interior• Vertical wood grain back panel;
except Chiffon, Cotton and White • Shelves and cabinet bottom are
finished to match cabinet exterior• Scalloped rails finished to match• Chiffon, Cotton and White scalloped
rails are painted Maple; shelves and cabinet bottom are painted Maple veneer
• Shelves are not removable• Scalloped rails are 3/4” wide x 1 5/8” solid wood• Bottle scallops are on 4” centers• Note: Must be installed between two cabinets or between cabinet and
side wall
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B
15 @B 18 @B 21 @B 24 @B
30˝
12˝WRS1830 shown
15˝18˝
12˝ WRS3018 shown
Wal
l Cab
inet
s
D12 Wall Appliance Cabinets
Wall Appliance CabinetsConstruction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
SST Construction - - - - - - - - - - - - - - - -K SDT Construction - - - - - - - - - - - - - - - -K PST Construction - - - - - - - - - - - - - - - -K PDT Construction - - - - - - - - - - - - - - - -K ADT Construction - - - - - - - - - - - - - - - -K 21 Depth Modification - - - - - - - - - - -B 24 Depth Modification - - - - - - - - - - -B CFO Cabinet Front Only - - - - - - - - - - -G
A WMS271812
Wall Microwave Shelf
A 12” Deep WMS271812 WMS301812
A 15” Deep WMS271815 WMS301815
• 3/4” thick shelf extends 3 25/32” beyond face frame of cabinet
• Shelf shipped unattached for easier installation; mounting hardware included
• Matching laminate interior• Vertical wood grain back panel; except
Chiffon, Cotton and White • Designed for countertop style
microwaves• Available in all finishes; Maple Accent
Glaze shipped standard finish• Chiffon and Cotton glaze shipped
standard finish • Note: Must be installed between two cabinets or between
cabinet and side wall
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 21 @B 24 @B CFO @G
12˝, 15˝
18˝
Cabinet
WMS271812
WMS301812
WMS271815
24˝ wide x14 ¼˝ high x 15˝ deep (shelf)
27˝ wide x14 ¼˝ high x 15˝ deep (shelf)
24˝ wide x14 ¼˝ high x 18˝ deep (shelf)
27˝ wide x14 ¼˝ high x 18˝ deep (shelf)WMS301815
Opening Sizes
Wall Microwave Shelf Cabinet
A 24” Wide WMSC2436B 27” Wide WMSC2730B WMSC2736B WMSC2742B
• 3/4” thick shelf extends 6 25/32” beyond face frame
• No shelf in upper section• Shelf shipped unattached for easier
installation; mounting hardware included
• Designed for countertop style microwaves
• Matching laminate interior
? Caution: WMSC cabinets require additional support. The cabinet should be screwed on both sides to
adjacent cabinets, wall, soffit or ceiling joist
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 21 @B 24 @B ) CFO @G
12˝
18˝
30˝36˝42˝
12˝15˝18˝
Opening SizesCabinet
WMSC2436B
WMSC2730B
WMSC2736B
21˝ wide x 18 ¾˝ high x 18˝ deep (shelf)
24˝ wide x 15 ¾˝ high x 18˝ deep (shelf)
24˝ wide x 18 ¾˝ high x 18˝ deep (shelf)
24˝ wide x 21 ¾˝ high x 18˝ deep (shelf)WMSC2742B
Wall Cabinets
D13Wall Appliance Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . WMS271812
Wall Microwave Cabinet
A 18” Deep WMC2736B WMC3036B WMC2745B WMC3045B
• No shelf in upper section• Cabinets with a “B” suffix have BUTT
doors without a center frame stile• Matching laminate interior• 4 1/2” wide trimmable face frame stiles• Doors are attached with face -mounted
concealed hinges
? Caution: WMC cabinets require additional support. The cabinet should be screwed on both sides to
adjacent cabinets, wall, soffit or ceiling joist
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K ) 21 @B ) 24 @B ) CFO @G
15˝23 ½˝
36˝45˝
18˝
Cabinet Opening Size Trimmable to
WMC2736B
WMC3036B
18˝ wide x 13˝ high
21˝ wide x 13˝ high
24˝ wide x 19 ½˝ high
27˝ wide x 19 ½˝ high
WMC2745B 18˝ wide x 13½˝ high 24˝ wide x 20˝ high
WMC3045B 21˝ wide x 13½˝ high 27˝ wide x 20˝ high
Gray color coding indicates new product, size or code.
Door Storage Unit
A C DOS18 R or L DOS24B
• Provides countertop out -of -sight storage for small appliances
• Designed to be flush mounted with 12” deep wall cabinets
• “No back” design allows easy access to electrical outlets and notching for backsplash
• Cabinets with a “B” suffix have BUTT doors without a center frame stile
• Frame and end panels oversized for custom fit
• End panels are shipped unattached• Available in all finishes including Maple
Accent Glaze• Available with square doors only• Interior surface of end panels are matching laminate for
Standard Construction (SST and SDT). Interior surface of end panels are matching veneer for Standard Construction with Plywood Ends (PST, PDT) and All Plywood Construction (ADT)
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 21 @B 24 @B CFO @G
18 /˝
18 /˝
12˝
12˝
DOS18
DOS24B
Gray color coding indicates new product, size or code.
Wal
l Cab
inet
s
D14 Wall Appliance Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . WMS271812
Appliance Garage Tambour Diagonal
A AGTD24 AGTD27
• Provides countertop out -of -sight storage for small appliances
• Designed to set back 1/4” from wall angle cabinet frame for easier installation
• AGTD24 for use under Wall Angle (WA24); AGTD27 for use under Wall Angle (WA27)
• Features a torsion spring activated roll -up tambour door
• “No back” design allows easy access to electrical outlets and notching for backsplash
• Bottom edges may be trimmed a maximum of 1” before interfering with tambour track stop
• End panels are 1/2” thick and have matching exterior surface. End panels shipped unattached
• Interior surface is maple natural laminate except for White and glazed finishes. White has white laminate surface and glazed finishes have matching wood veneer
• Hole for knob is pre -drilled and one antique brass knob included
• Installation instructions and mounting hardware included• Available in all finishes; Maple Accent Glaze shipped
standard finish• One per carton• Installation Note: Requires field fabricated back on one
side when used with PWA- Regardless of construction option, Appliance Garage is
constructed and shipped the same
- SST @K - SDT @K - PST @K - PDT @K - ADT @K 21 @B 24 @B CFO @G
18 ¼˝
Appliance Garage Tambour Straight
A AGTS18 AGTS24 AGTS30
• Provides countertop out -of -sight storage for small appliances
• Designed to set back 1/4” from wall cabinet frame for easier installation
• Fits under 18”, 24” and 30” wide wall cabinets
• Features a torsion spring activated roll -up tambour door
• “No back” design allows easy access to electrical outlets and notching for backsplash
• Bottom edges may be trimmed a maximum of 1” before interfering with tambour track stop. Width cannot be trimmed
• End panels are 1/2” thick and have matching exterior surface. End panels shipped unattached
• Interior surface is maple natural laminate except for White and glazed finishes. White has white laminate surface and glazed finishes have matching wood veneer
• Holes for knobs are pre -drilled. One antique brass knob is included with AGTS18 and AGTS24; two with AGTS30
• Installation instructions and mounting hardware included• Available in all finishes; Maple Accent Glaze shipped
standard finish• One per carton- Regardless of construction option, Appliance Garage is
constructed and shipped the same
- SST @K - SDT @K - PST @K - PDT @K - ADT @K 21 @B 24 @B CFO @G
18 ¼˝
Wall Cabinets
D15Wall Hoods
Wall HoodsImportant Note: Mount hood a minimum of 24” above range cooking surface. Consult building codes prior to installation. Hood must be securely anchored to wall.
A WHL36
Wall Hood Cove
A WHCV362442 • Solid wood/wood veneer construction
• For installations with exterior ductwork• A 3” space is recommended on both sides of hood for adjacent cabinet runs• Can accommodate ceilings up to 9’ high• Not designed to be used with a soffit• Requires a metal liner and blower. See Wall Hood Liner (WHL36) and Wall
Hood Blower (WHB36-620)• Available in all finishes; Maple Accent Glaze shipped standard finish• Chiffon, Cotton and White are painted Maple • Not available in Hickory door styles• Note: Cabinetry and appliances located below these Wall Hoods must be
pulled to a minimum of 27˝deep and a maximum of 30˝ deep for improved function
21˝38˝
35 ½˝ 12˝
42˝
12˝ 20˝
Wall Hood Classic Chimney Plain
A WHCC362442P
• Solid wood/wood veneer construction• For installations with exterior ductwork• A 3” space is recommended on both sides of hood for adjacent cabinet runs• Can accommodate ceilings up to 9’ high with installation of the chimney or 8’
without the chimney• Not designed to be used with a soffit• 12” tall chimney is shipped unattached for easier installation• Requires a metal liner and blower. See Wall Hood Liner (WHL36) and Wall
Hood Blower (WHB36-620)• Available in all finishes; Maple Accent Glaze shipped standard finish• Chiffon, Cotton and White are painted Maple • Not available in Hickory door styles• Note: Cabinetry and appliances located below these Wall Hoods must be
pulled to a minimum of 27˝deep and a maximum of 30˝ deep for improved function
21˝38 ¾˝
12 ½˝
12˝
17 ½˝42˝
20˝11 ¾˝
Range Hood Front Spindle Railing
A RHF3024SP RHF3624SP
• Decorative slanted range hood with batten strips• Hood extends 7 1/4” from face frame of adjacent wall cabinets, 19 1/4” from
wall• Mounts between two 24” high or higher wall cabinets• Galley rail included, shipped unattached• Almond colored painted metal liner included• For installations with exterior ductwork• Range Hood Blower (RHB) required; ordered separately• Available in all finishes; Maple Accent Glaze shipped standard finish• Chiffon, Cotton and White are painted Maple
23 ½˝
30˝ or 36˝
Wal
l Cab
inet
s
D16 Wall Hoods
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . WHL36
Wall Hood Blower
A WHB36-620
• AC 120 volt required• 620 CFM/7.5 Sones; three -speed motor with push button electronic
control• Constructed of heavy gauge steel• Pre -wired for electrical connection• 8” diameter duct vents on top• Dual bulb halogen lighting (PAR 20) included• UL and HVI approved• For installations with exterior ductwork• For use with Wall Hood Cove (WHCV362442) and Wall Hood Classic
Chimney Plain (WHCC362442P)• For use with Wall Hood Liner (WHL36)• Metallic medium gray painted finish on cover plate is corrosion and rust
resistant. Blowerbox has galvanized finish• One per carton
8" diameter
10 ½˝
11 ½˝
17 /˝
12" 21 /˝
Wall Hood Liner
A WHL36
• Constructed of heavy gauge steel• For installations with exterior ductwork• For use with Wall Hood Cove (WHCV362442) and Wall Hood Classic
Chimney Plain (WHCC362442P)• For use with Wall Hood Blower - 36” (WHB36 -620)• Metallic medium gray painted finish on cover plate is corrosion and rust
resistant• One per carton
34 /˝18 /˝
4˝
11 ¼˝
17 /˝
Range Hood Blower and Light Unit
A RHB
• AC 120 volt required• Double squirrel cage blower unit (360 CFM maximum) with a solid state,
variable speed control, on/off switch, and two 40 watt tubular light fixtures with lens diffuser and dimming switch. Tubular bulbs not included
• 3 1/4” x 10” top exhaust with built -in back draft damper unit; duct not included
• Pre -wired for electrical connection• Charcoal filter laminated within replaceable grease filter• Washable aluminum mesh grease filter included• UL and CSA approved• For installations with exterior ductwork• For use with Range Hood Front Spindle Railing (RHF_24SP)• Almond colored painted finish• One per carton
Wall Cabinets
D17Wall Accessories
Wall AccessoriesConstruction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
CH Cherry - - - - - - - - - - - - - - - - - - - - -P HK Hickory - - - - - - - - - - - - - - - - - - - -P MP Maple - - - - - - - - - - - - - - - - - - - - -P RO Red Oak - - - - - - - - - - - - - - - - - - -P TH Thermofoil - - - - - - - - - - - - - - - - -P
A MWEP1230
Door Spice Rack
A 8” wide x 3” deep x 4 3/4” high DSR12 DSR12-2 11” wide x 3” deep x 4 3/4” high DSR15 DSR15-2 14” wide x 3” deep x 4 3/4” high DSR18 DSR18-2
• Solid wood rack with natural finish• Installs on backside of cabinet door• Installation instructions and mounting
hardware included• For Fox Harbor, LaBelle, Somerton Hill
and Whitebay II door styles, the rack installs onto the backside of the door center panel. DSR12 installs on 15” and 30” wide cabinets. DSR15 installs on 18” and 36” wide cabinets. DSR18 installs on 21” and 42” wide cabinets
• For use on all Fusion doors with adequate frame opening• Not for use on Avenue, Bayville, Bellingham, Lariat or
Portrait door styles• Not for use on any 24” or 27” BUTT door cabinets, except
Fusion• Dimensions: 3” deep x 4 3/4” high. DSR12 is 8” wide,
DSR15 is 11” wide and DSR18 is 14” wide• Offered individually or two per carton
CH @P HK @P MP @P RO @P TH @P
3˝
4 ¾˝12˝, 15˝, 18˝
Lazy Susan Revolving Shelf Kit (One Shelf)
A LS1 • One 18” diameter wide impact white
plastic shelf• Distance from top of shelf rim to top of
cabinet surface is 2 7/8”• Attaches to cabinet shelf or bottom,
1 1/2” clearance gap between bottom of shelf and cabinet shelf or bottom
• Installation instructions and mounting hardware included
• Fits 30”, 36”, 39” and 42” high Wall Angle (WA) and Peninsula Wall Angle (PWA) cabinets
• One per carton
CH @P HK @P MP @P RO @P TH @P
18˝
2 /˝
Top of cabinet f loor
Shelf rim
Lazy Susan Revolving Shelf Kit (Three Shelves)
A LS3 • Three 18” diameter wide impact white
plastic shelves that rotate together• Fits 24” wide Wall Angle (WA) and
Peninsula Wall Angle (PWA) cabinets• Replaces adjustable shelves shipped with
cabinet• Includes center post and installation
hardware• Adjust 22” to 33” in height• One set of three shelves per carton
CH @P HK @P MP @P RO @P TH @P
18˝
Wal
l Cab
inet
s
D18 Wall Accessories
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . DSR12-2
Cookbook Rack Pull-Down
A CRPD • Clear shelf with nickel hardware
• Holds cookbooks for easier access• Tray extends down 10 1/2” when in
open position• Holds up to four lbs.• Can be folded under cabinet when not
in use• Folded size is 21 1/2” wide x 10” deep x
2 3/4” high• For use under 24” wide or wider wall cabinet• Installation instructions and mounting hardware included• One per carton
CH @P HK @P MP @P RO @P TH @P
10 ½˝
21 ½˝
Stem Glass Holder
A SGH30 SGH30-10 SGH36 SGH36-10
• Solid wood• SGH30 - six 11 5/8” long x 1 1/8” wide
slots• SGH36 - eight 11 5/8” long x 1 1/8” wide
slots• Fits under standard 12” deep wall
cabinet• Rack may be cut down for narrower
cabinet application• Installation instructions and mounting hardware included• Chiffon, Cotton and White ends are solid maple with
painted finish, glaze shipped standard finish• Offered individually or ten per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
1 /˝
Under Cabinet Shelf
A UCS36
• Solid wood ends and wood veneered shelves
• 4 3/4” deep shelves with groove for displaying plates up to 6 1/8” diameter
• For use under 36” wide wall cabinets• Back and top panels included for
strength and ease of installation• Ends can be removed so that the
assembly can be cut down in 3” increments to only 12” wide for narrower cabinet applications
• Shipped assembled• Available in all finishes; Maple Accent Glaze shipped
standard finish• Chiffon, Cotton and White ends are solid maple with
painted finish, glaze shipped standard finish• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
8 ¼”
9 ¾”
Under Cabinet Corner Shelf
A UCSC2424
• Solid wood ends and wood veneered shelves
• 4 3/4” deep shelves with groove for displaying plates up to 6 1/8” diameter
• Fits under WA24 and WEZR24• Extends 24” from corner in both
directions• Back and top panels included for
strength and ease of installation• Shipped assembled• Available in all finishes; Maple Accent Glaze shipped
standard finish• Chiffon, Cotton and White ends are solid maple with
painted finish, glaze shipped standard finish• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
8 ¼”
9 ¾”
Wall Cabinets
D19Wall Accessories
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . DSR12-2
Open Cube Organizer
A OCO18 3 compartments OCO24 4 compartments OCO30 5 compartments OCO36 6 compartments
• 5 1/4” x 5 1/4” square compartments• Units may be stacked horizontally or mounted
vertically• Matching wood veneer interior and exterior surfaces• Includes a matching solid wood strip at each end to
align with cabinet when installed horizontally• Use a Wall End Panel (WEP) on exposed sides to cover
end panel joints between wall cabinet and organizer• Available in all finishes; Maple Accent Glaze shipped
standard finish• Chiffon, Cotton and White are painted maple and shipped standard
finish• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
6˝
12˝
OCO30 shown
Spice Drawer Organizer
A SDO18 3 drawers SDO24 4 drawers SDO30 5 drawers SDO36 6 drawers
• Solid half blind, 1/2” thick, dovetail drawers. Finished with durable topcoat. Interior dimensions: 4 1/8” wide x 10” front to back x 4 7/16” deep
• 5 1/2” x 5 1/2” x 3/4” thick drawer fronts with rounded front edges. No ogee profile
• White drawer fronts are vinyl laminated MDF• Moisture and stain resistant, easy clean laminate on
interior drawer bottom printed to match sides, front and back
• Matching wood veneer interior and exterior surfaces• Includes a matching solid wood strip at each end to align with cabinet
when installed horizontally• Units may be stacked horizontally or mounted vertically• Use a Wall End Panel (WEP) on exposed sides to cover end panel joints
between wall cabinet and organizer• Decorative hardware is optional• Available in all finishes; Maple Accent Glaze shipped standard finish• Chiffon, Cotton and White are painted maple and shipped standard
finish• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
6˝
12˝
SDO30 shown
Reveals
5 ½˝
5 ½˝ 5 ½˝½˝ /˝ /˝
¼˝
¼˝
Wal
l Cab
inet
s
D20 Wall Accessories
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . DSR12-2
Wall Filler
A 1” Wide WF1-30 WF1-30-20 2” Wide WF2-30 WF2-30-10 3” Wide WF3-30 WF3-30-4 WF3-36 WF3-39 WF3-39-4 WF3-42 WF3-42-4 6” Wide WF6-30 WF6-36 WF6-39 WF6-42
• 3/4” thick solid wood• Backside of filler not finished• Available in all finishes; Maple Accent
Glaze shipped standard finish• Chiffon, Cotton and White are painted
Maple • Overlays (OL) available for all full
overlay door styles except Fusion. Order separately
• Offered individually; select models offered in quantities of 4, 10 and 20
+ CH @P + HK @P + MP @P + RO @P + TH @P
1" 2" 3" 6"
30"36"39"42"
30"
Gray color coding indicates new product, size or code.
Wall Fluted Filler
A WFF3-12 WFF3-15 WFF3-18 WFF3-24 WFF3-30 WFF3-36 WFF3-39 WFF3-42
• Use between cabinets or to create a column effect. Can be combined with other moldings and panels for decorative effects
• Four flutes• Backside of filler not finished• Available in all finishes; Maple Accent
Glaze shipped standard finish• Chiffon, Cotton and White are painted
Maple • One per carton
CH @P + HK @P + MP @P + RO @P + TH @P
1 ½˝
3˝
¾˝
1 ½˝
12˝15˝18˝23 ½˝30˝36˝39˝42˝
3˝
¾˝
/˝
Gray color coding indicates new product, size or code.
Wall Cabinets
D21Wall Accessories
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . DSR12-2
Filler Angle
A FA3-30 FA3-42 FA3-60
• Fills 3” space between cabinets that are offset 3”
• 3/4” thick solid wood• For right or left hand use• Backside of filler not finished• Available in all finishes; Maple Accent
Glaze shipped standard finish• Chiffon, Cotton and White are painted
maple and shipped standard finish• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
3˝¾˝
30˝42˝60˝
3˝
3˝
Fluted Filler Angle
A FFA3-30 FFA3-36 FFA3-39 FFA3-42
• Fills 3” space between cabinets that are offset 3”
• Five flutes• 3/4” thick solid wood• For right or left hand use• Backside of filler not finished• Chiffon, Cotton and White are painted
Maple • Available in all finishes; Maple Accent
Glaze shipped standard finish• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
¾˝
30˝36˝39˝42˝
1 ½˝
1 ½˝
3˝
3˝
Gray color coding indicates new product, size or code.
Wal
l Cab
inet
s
D22 Wall Accessories
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . DSR12-2
Wall Filler Corner
A WFC3-30 WFC3-42
• 3” on each face• 3/4” thick solid wood• Available in all finishes; Maple Accent
Glaze shipped standard finish• Chiffon, Cotton and White are painted
maple and shipped standard finish• Backside of filler not finished• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
30˝42˝
3˝
3˝
¾˝
Wall Pull-Out Filler
A WFP3-30 WFP6-30
• Three adjustable natural finished hardwood shelves
• 3/4” thick solid wood pre -drilled filler included, shipped unattached
• Wood filler aligns with face frames of adjacent wall cabinets
• Unit slides on full extension runners; one on the top and two at the bottom
• Must be installed between two cabinets that are at least 30” high and 12” deep
• Overlays (OL) available for all full overlay door styles except Fusion. Order separately
• Natural finish hardwood interior• Available in all finishes; Maple Accent Glaze shipped
standard finish• Chiffon, Cotton and White are painted Maple • WFP3 -30 3” wide pull -out 2 3/4” shelf width 1 3/4” usable space between chrome rails 3 1/16” required between adjacent cabinets• WFP6 -30 6” wide pull -out 5 3/4” shelf width 4 3/4” usable space between chrome rails 6 1/16” required between adjacent cabinets
+ CH @P + HK @P + MP @P + RO @P + TH @P
30˝
3˝, 612˝
Filler Overlay
A 3” Wide OL3-12 OL3-15 OL3-18 OL3-21 OL3-24 OL3-30 OL3-36 OL3-39 OL3-42
A 6” Wide OL6-21 OL6-24 OL6-30 OL6-36 OL6-39 OL6-42
• Attaches to 3” or 6” wide filler, not included. Order separately
• 3/4” thick with matching profile on all four edges, sized to match door height of adjacent cabinet
• Spacers installed on backside to align with doors of adjacent cabinet
• Mounting hardware included• Available for all Full Overlay door styles,
except Fusion• Specify door style, specie and finish• One per carton
+ CH @P HK @P + MP @P + RO @P + TH @P
3˝ 6˝
Overlay FillerNot
Included
2 /˝5 /˝
11 ¼˝14 ¼˝17 ¼˝19 ¾˝22 ¾˝29 ¼˝35 ¼˝38 ¼˝41 ¼˝
12˝ 15˝ 18˝
20 ½˝ (21˝) 23 ½˝ (24˝)
30˝ 36˝ 39˝ 42˝
Gray color coding indicates new product, size or code.
Wall Cabinets
D23Wall Accessories
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . DSR12-2
Wall Box
A 3” Wide WB3-1230 WB3-1242 6” Wide WB6-1230 WB6-1242
• Front is 3/4” thick solid wood• Finished front and sides• End panels recessed 1/4”• Vertical wood grain• May be used on either right or left end• Available in all finishes; Maple Accent Glaze shipped
standard finish• Chiffon and Cotton glaze shipped standard finish • Chiffon, Cotton and White are painted Maple • All finishes available on Standard Construction (SST, SDT)• All finishes, except white, available on Plywood ends (PST, PDT)• Not available with All Plywood Construction (ADT)• One per carton
+ CH @P HK @P + MP @P + RO @P + TH @P
12˝ 3˝, 6˝
30˝42˝
¾˝¼˝
Wall Column Fluted
A WCF6-1530 WCF6-1536 WCF6-1542
• Fluted front is 3/4” solid wood• Six flutes• Finished front and sides• Flush end panels• Vertical wood grain• May be used on either right or left end• Available in all finishes; Maple Accent Glaze shipped
standard finish• Chiffon and Cotton glaze shipped standard finish • Chiffon, Cotton and White are painted Maple • All finishes available on Standard Construction (SST, SDT)• All finishes, except white, available on Plywood ends (PST, PDT)• Not available with All Plywood Construction (ADT)• One per carton
+ CH @P HK @P + MP @P + RO @P + TH @P
¾˝
15˝ 6˝
30˝36˝42˝
1 ½˝
1 ½˝
Wall End Panel
A 11 1/4” Wide WEP30 WEP30-6 WEP42 WEP42-6 14 1/4” Wide WEP1530 WEP1530-6 WEP1542 WEP1542-6
• Used to trim or flush out laminate exposed end of wall cabinet
• For right or left hand use• 3/16” thick veneered plywood panel, except White,
finished on one side; grain runs lengthwise • 3/16” thick laminate panel for White; finished on one side
only• Finished one side only• 42” panels trimmable for 36“ and 39” wall cabinets• Available in all finishes; Maple Accent Glaze shipped standard finish• Chiffon and Cotton are painted Maple• Offered individually or six per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
Grain Direction
30˝42˝
11 ¼˝14 ¼˝
Wal
l Cab
inet
s
D24 Wall Accessories
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . DSR12-2
Matching Wall End Panel
A 11 1/4” wide MWEP1230 MWEP1236 MWEP1239 MWEP1242
• Provides a finished furniture look to 12” deep wall cabinet ends
• For right or left hand use• 3/16” thick white laminate panel for
Arbor Falls II and Whitebay II• 3/16” thick veneered plywood panel,
except Arbor Falls II and Whitebay II• Available in all door styles and finishes
including arch shape; except Maple Accent Glaze which is available in square shape only
• Full overlay door styles shipped unattached to panel. When installed, door overlaps cabinet frame edge to provide matching reveals
• Traditional overlay door styles; door shipped attached to panel
• Panel trimmed to fit installation• 42” panels trimmable for 36“ and 39” wall cabinets• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
Grain Direction
30˝36˝39˝42˝
Item
MWEP1230
MWEP1236
MWEP1239
MWEP1242
11 ¼˝
11 ¼˝
11 ¼˝
11 ¼˝
Width
30˝
36˝
39˝
42˝
Length
29 ¼˝
35 ¼˝
38 ¼˝
41 ¼˝
Length
11 /˝
11 /˝
11 /˝
11 /˝
Width
28˝
34˝
37˝
40˝
Length
10 ¼˝
10 ¼˝
10 ¼˝
10 ¼˝
Width
Panel Size
Full Overlay Door
Traditional Overlay Door
Gray color coding indicates new product, size or code.
Base Cabinets
E1Base Cabinets
Base CabinetsConstruction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
SST Construction - - - - - - - - - - - - - - - -K SDT Construction - - - - - - - - - - - - - - - -K PST Construction - - - - - - - - - - - - - - - -K PDT Construction - - - - - - - - - - - - - - - -K ADT Construction - - - - - - - - - - - - - - - -K 12 Depth Modification - - - - - - - - - - -B 15 Depth Modification - - - - - - - - - - -B 18 Depth Modification - - - - - - - - - - -B 21 Depth Modification - - - - - - - - - - -B HDS Half Depth Shelf - - - - - - - - - - - - -D FDS Full Depth Shelf - - - - - - - - - - - - - -D
1ST 1 Standard Tray - - - - - - - - - - - - - -D 2ST 2 Standard Trays - - - - - - - - - - - - -D 3ST 3 Standard Trays - - - - - - - - - - - - -D 4ST 4 Standard Trays - - - - - - - - - - - - -D 6ST 6 Standard Trays - - - - - - - - - - - - -D 1FT 1 Standard Full -Width Tray - - - - -D 2FT 2 Standard Full -Width Trays - - - - -D 2DT 2 Deluxe Trays - - - - - - - - - - - - - - -D 4DT 4 Deluxe Trays - - - - - - - - - - - - - - -D 6DT 6 Deluxe Trays - - - - - - - - - - - - - - -D 2DF 2 Deluxe Full -Width Trays - - - - - -D CFO Cabinet Front Only - - - - - - - - - - -G
A C D B12 L 1st
Base Single Door
A C D Specify R or L B12 R or L HDS B15 R or L HDS B18 R or L HDS B21 R or L HDS B24 R or L HDS
• Standard height top drawer
• Back panel is pre -drilled for optional roll -out trays
- When depth is reduced to 12” or 15”, drawers become a false drawer front
- Tray options are available for cabinets with select depth modifications. See Construction Options for specifics
• Note: For tray or shelf options for select cabinets, replace HDS (10d) with the option code of your choice
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K - 12 @B - 15 @B ) 18 @B ) 21 @B + HDS @D ) FDS @D - 1ST @D
- 2ST @D 3ST @D 4ST @D 6ST @D 1FT @D 2FT @D - 2DT @D 4DT @D 6DT @D 2DF @D ) CFO @G
34 ½˝
24˝
HDS option shown
Base Single Door Full-Height
A C D 12” Deep
Specify R or L(% B1212FH R or L(% B1512FH R or L(% B1812FH R or L(% B2112FH R or L(% B2412FH R or L 24” Deep
Specify R or L( B9FH R or L B12FH R or L HDS B15FH R or L HDS B18FH R or L HDS B21FH R or L HDS B24FH R or L HDS
• Back panel is pre -drilled for optional roll -out trays
- Tray options are available for cabinets with select depth modifications. See Construction Options for specifics
• Note: For tray or shelf options for select cabinets, replace HDS (10d) with the option code of your choice
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K - 12 @B - 15 @B - 18 @B - 21 @B + HDS @D - FDS @D - 1ST @D
- 2ST @D 3ST @D 4ST @D 6ST @D 1FT @D 2FT @D - 2DT @D 4DT @D 6DT @D 2DF @D ) CFO @G
34 ½˝
24˝
HDS option shown
B12FH-B24FH
34 ½˝
12˝ B1212FH-B2412FH
( Not available with tray or shelf options% Depth modification options are not available
34 ½˝
12˝
34 ½˝
24˝
Non-Butt HDS, option shown
B3012FH
B24BFH HDS- B48FH HDS
34 ½˝
12˝
B2412BFH-B3012BFH
Base
Cab
inet
s
E2 Base Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B12L1ST
Base Double Door
A D One Drawer B24B HDS B27B HDS B30 HDS B30B HDS B33 HDS B33B HDS B36 HDS B36B HDS B39 HDS Two Drawers B42 HDS B45 HDS B48 HDS
• Standard height top drawers
• B24B -B39 have one standard drawer
• B42 -B48 have two standard drawers
- When depth is reduced to 12” or 15”, drawers become a false drawer front
- Tray options are available for cabinets with select depth modifications. See Construction Options for specifics
• Back panel is pre -drilled for optional roll -out trays
• Cabinets with a “B” suffix to have BUTT doors without frame center stile
• Note: For tray or shelf options for select cabinets, replace HDS (10d) with the option code of your choice
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K - 12 @B - 15 @B ) 18 @B ) 21 @B + HDS @D ) FDS @D 1ST @D
- 2ST @D 3ST @D - 4ST @D 6ST @D - 1FT @D - 2FT @D 2DT @D - 4DT @D 6DT @D - 2DF @D ) CFO @G
HDS option shown
34 ½˝
24˝B42 - B48
34 ½˝
24˝
Non-Butt, HDS option shown
B24B - B39
Gray color coding indicates new product, size or code.
Base Double Door Full-Height
A D 12” Deep%( B2412BFH%( B2712BFH%( B3012BFH%( B3012FH 24” Deep B24BFH HDS B27BFH HDS B30BFH HDS B30FH HDS B33BFH HDS B33FH HDS B36FH HDS B36BFH HDS B39FH HDS B42FH HDS B45FH HDS B48FH HDS
• Back panel is pre -drilled for optional roll -out trays
- Tray options are available for cabinets with select depth modifications. See Construction Options for specifics
• Two Full -height doors• Cabinets with a “B”
suffix to have BUTT doors without frame center stile
• Note: For tray or shelf options for select cabinets, replace HDS (10d) with the option code of your choice
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K - 12 @B - 15 @B - 18 @B - 21 @B + HDS @D - FDS @D 1ST @D
- 2ST @D 3ST @D - 4ST @D 6ST @D - 1FT @D - 2FT @D 2DT @D - 4DT @D 6DT @D - 2DF @D ) CFO @G
% Depth modification options are not available( Not available with tray or shelf options
Gray color coding indicates new product, size or code.
Base Cabinets
E3Base Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B12L1ST
Base Butt Door - Full Extension Tray
A D BSD30B 2FT BSD36B 2FT
• One standard height full -width drawer
• Roll -out Trays (ROT) are full extension
• Cabinets with a “B” suffix to have BUTT doors without frame center stile
- Note: Must select tray option, either 2FT or 2DF.
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D FDS @D 1ST @D
2ST @D 3ST @D 4ST @D 6ST @D 1FT @D - 2FT @D 2DT @D 4DT @D 6DT @D - 2DF @D ) CFO @G
34 ½˝
24˝
2FT option shown
Base Three Door
A D B54 HDS
• Three standard height drawers
• Three equal sized doors; center door hinged right
• 3 3/16” wide full -width support cross rail across top front of cabinet
• Back panel is pre -drilled for optional roll -out trays
- When depth is reduced to 12” or 15”, drawers become a false drawer front
- Tray options are available for cabinets with select depth modifications. See Construction Options for specifics
• Note: For tray or shelf options for select cabinets, replace HDS (10d) with the option code of your choice
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K - 12 @B - 15 @B - 18 @B - 21 @B + HDS @D ) FDS @D 1ST @D
2ST @D - 3ST @D 4ST @D - 6ST @D 1FT @D 2FT @D 2DT @D 4DT @D - 6DT @D 2DF @D ) CFO @G
34 ½˝
24˝18˝
18˝18˝
HDS option shown
Peninsula Base Single Door
A D PB18 FDS PB21 FDS PB24 FDS
• One standard height full -width drawer opens on kitchen side
• Peninsula side has one full -width false drawer front above door
• Each side has one door hinged at the same end of cabinet
• Door hinged left on kitchen side
• Note: Full depth shelf (FDS) option or a tray option must be selected for this cabinet
• Note: It is not recommended to use Peninsula Base cabinets in island applications. Failure to follow this limitation could cause serious injury and will void the product warranty
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D ) FDS @D ) 1ST @D
) 2ST @D 3ST @D 4ST @D 6ST @D 1FT @D 2FT @D ) 2DT @D 4DT @D 6DT @D 2DF @D CFO @G
34 ½˝
24 /˝(excluding door
and drawer)
Kitchen side
Peninsula side
FDS option shown
Kitchen side
Peninsula side
Base
Cab
inet
s
E4 Base Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B12L1ST
Peninsula Base Double Door
A D PB30 FDS PB36 FDS
• One standard height full -width drawer opens on kitchen side
• Peninsula side has one full -width false drawer front above door
• Each side has two doors • Note: Full depth shelf
(FDS) option or a tray option must be selected for this cabinet
• Note: It is not recommended to use Peninsula Base cabinets in island applications. Failure to follow this limitation could cause serious injury and will void the product warranty
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D ) FDS @D 1ST @D
) 2ST @D 3ST @D ) 4ST @D 6ST @D 1FT @D 2FT @D 2DT @D ) 4DT @D 6DT @D 2DF @D CFO @G
34 ½˝
Kitchen side
Peninsula side
FDS option shown
24 /˝(excluding doors
and drawer)
Kitchen side
Peninsula side
Peninsula Base Butt Door
A D PB24B FDS PB27B FDS PB30B FDS PB36B FDS
• One standard height full -width drawer opens on kitchen side
• Peninsula side has one full -width false drawer front above doors
• Each side has two doors • Cabinets with a “B”
suffix to have BUTT doors without frame center stile
• Note: Full depth shelf (FDS) option or a tray option must be selected for this cabinet
• Note: It is not recommended to use Peninsula Base cabinets in island applications. Failure to follow this limitation could cause serious injury and will void the product warranty
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D ) FDS @D 1ST @D
2ST @D 3ST @D 4ST @D 6ST @D ) 1FT @D ) 2FT @D 2DT @D 4DT @D 6DT @D ) 2DF @D CFO @G
34 ½˝
Kitchen side
Peninsula side
24 /˝(excluding doors
and drawer)
Gray color coding indicates new product, size or code.
Base Pots and Pans Storage
A BPPS27-2D BPPS30-2D BPPS33-2D BPPS36-2D
• Always shipped with two solid wood deep Dovetail drawers
• Heavy duty full extension undermount guides
• 3 3/16” wide full -width support cross rail across top front of cabinet
• Drawer interior height is 9 1/4”
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D FDS @D 1ST @D
2ST @D 3ST @D 4ST @D 6ST @D 1FT @D 2FT @D 2DT @D 4DT @D 6DT @D 2DF @D ) CFO @G
24˝
34 ½˝
Gray color coding indicates new product, size or code.
Base Cabinets
E5Base Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B12L1ST
Base Three Drawer
A 3/4 Extension Drawer BD12-3D BD15-3D BD18-3D BD21-3D BD24-3D BD27-3D Full Extension Drawer BD30-3D BD33-3D BD36-3D
• One standard height drawer on top
• Two deep drawers on bottom• Cabinets BD12 -3D to BD27 -3D
in SST and PST construction will have standard 3/4 extension side mount slides on all three drawers. SDT, PDT, and ADT construction will have Full -extension undermount soft -close slides on all three drawers
• Cabinets BD30 -3D to BD36 -3D in SST and PST construction will have standard 3/4 extension side mount slides on top drawer and Full -extension ball bearing side mount slides on deep drawers. SDT, PDT, and ADT construction will have Full -extension undermount soft -close slides on all three drawers.
• Cabinets BD30 -3D to BD36 -3D in SST and PST construction reduced depth to 18”, will have all epoxy side mounted standard slides on all drawers
• LaBelle standard height drawer front has a flat recessed center panel, while deep drawer fronts have a raised center panel
• Note: See frame dimensions in the Cabinet Specifications section for drawer opening heights
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 12 @B 15 @B ) 18 @B ) 21 @B HDS @D FDS @D 1ST @D
2ST @D 3ST @D 4ST @D 6ST @D 1FT @D 2FT @D 2DT @D 4DT @D 6DT @D 2DF @D ) CFO @G
24˝
34 ½˝
Base Four Drawer
A BD12-4D BD15-4D BD18-4D BD21-4D BD24-4D BD27-4D
• Three standard height drawers• One deep drawer on bottom• 3/4 extension slides on all
three drawers when SST or PST construction is chosen
• LaBelle standard height drawer front has a flat recessed center panel, while deep drawer fronts have a raised center panel
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 12 @B 15 @B ) 18 @B ) 21 @B HDS @D FDS @D 1ST @D
2ST @D 3ST @D 4ST @D 6ST @D 1FT @D 2FT @D 2DT @D 4DT @D 6DT @D 2DF @D ) CFO @G
24˝
34 ½˝
Base Combination Four Drawer
A D Specify DR or DL BCD24 DR or DL-4D FDS BCD30 DR or DL-4D FDS BCD36 DR or DL-4D FDS
• Three standard height drawers; top drawer is full -width
• One deep drawer• Specify DL (Drawer Left) or
DR (Drawer Right) position for drawers
• Back panel is pre -drilled for optional roll -out trays
• LaBelle standard height drawer front has a flat recessed center panel, while deep drawer fronts have a raised center panel
- Tray options are available for cabinets with select depth modifications. See Construction Options for specifics
• Note: Full depth shelf (FDS) option or a tray option must be selected for this cabinet
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 12 @B 15 @B - 18 @B - 21 @B HDS @D - FDS @D - 1ST @D
- 2ST @D 3ST @D 4ST @D 6ST @D 1FT @D 2FT @D - 2DT @D 4DT @D 6DT @D 2DF @D ) CFO @G
FDS option shown24˝
34 ½˝
Base
Cab
inet
s
E6 Base Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . B12L1ST
Base Pull-Out
A BPO9
• Fixed bottom shelf and (3) adjustable shelves
• Full -height door attached to pull -out
• Tiers are 3 3/4” wide• 1/4” diameter chrome
plated steel rail side extensions help prevent stored items from falling out, yet still viewable
• White epoxy coated full -extension ball bearing slides
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D FDS @D 1ST @D
2ST @D 3ST @D 4ST @D 6ST @D 1FT @D 2FT @D 2DT @D 4DT @D 6DT @D 2DF @D CFO @G
34 ½˝
24˝
Base Wastebasket Top Mount
A BWBT15 BWBT18
• One standard height full -width drawer
• Door is attached to wastebasket assembly and is pulled open to access basket(s)
• Top mounted wastebasket assembly rolls out on full -extension ball -bearing slides
• BWBT15 has one 35 qt. white plastic basket and one 5 1/2” deep white plastic tray for garbage bag storage
• BWBT18 has two 35 qt. white plastic baskets (no garbage bag tray storage)
• Hardwood veneer tray supports easily removable basket(s)
• 35 qt. basket size is 10 1/2” x 14 5/8 x 18” tall
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D FDS @D 1ST @D
2ST @D 3ST @D 4ST @D 6ST @D 1FT @D 2FT @D 2DT @D 4DT @D 6DT @D 2DF @D CFO @G
34 ½˝
24˝
BWBT18 shown
Base Cabinets
E7Base Sink Cabinets
Base Sink Cabinets
Construction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
SST Construction - - - - - - - - - - - - - - - -K SDT Construction - - - - - - - - - - - - - - - -K PST Construction - - - - - - - - - - - - - - - -K PDT Construction - - - - - - - - - - - - - - - -K ADT Construction - - - - - - - - - - - - - - - -K 12 Depth Modification - - - - - - - - - - -B 15 Depth Modification - - - - - - - - - - -B 18 Depth Modification - - - - - - - - - - -B 21 Depth Modification - - - - - - - - - - -B CFO Cabinet Front Only - - - - - - - - - - -G
A SFDB4242
CoreGuard® Sink Base
A Without Utility Tray SB30B-CG SB33B-CG SB36B-CG With Utility Tray SB30BUT-CG SB33BUT-CG SB36BUT-CG
• Cabinets with a “B” suffix to have BUTT doors without frame center stile
• Light beige color interior• Available for order with all door styles- Regardless of construction option,
cabinet is constructed and shipped the same
• No shelf• One full -width false drawer front above
doors- Ordereable in all construction options,
shipped with back, end and bottom panels made of an engineered polymer material
• Decorative end panel required for end of peninsula or island. Not Included, order separately
• Bottom panel slants 1º toward front of cabinet and has raised ribs to slightly elevate stored items
• Easy to clean and durable sink base helps protect the cabinetry from everyday leaks and spills
• For cabinet back panel plumbing installation errors, CoreGuard® Panel Backer is available. See CGPB36 in Panels section. Order separately
? Caution: For an island/peninsula installation, the CoreGuard® Sink cabinet must have a minimum of one (1) 15” cabinet or larger
installed adjacent to it in order for the island/peninsula to have adequate structural stability. Accessories cannot be installed on end panels, back or floor of the cabinet
- SST @K - SDT @K - PST @K - PDT @K - ADT @K 12 @B 15 @B 18 @B 21 @B CFO @G
34 ½˝
24˝
34 ½˝
24˝SB30B-CG -SB36B-CG
SB30BUT-CG -SB36BUT-CG
Opening Sizes
Cabinet Top Width Top Depth
SB30B-CG 27 ⁄˝ 22 ⅜ ˝
SB33B-CG 30 ⁄˝ 22 ⅜ ˝
SB36B-GC 33 ⁄˝ 22 ⅜ ˝
SB30BUT-CG 27 ⁄˝ 22 ⅜
SB33BUT-CG 30 ⁄˝ 22 ⅜ ˝
SB36BUT-GC 33 ⁄˝ 22 ⅜
Base
Cab
inet
s
E8 Base Sink Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . SB30BUT-CG
Sink Base Single Door
A C Specify R or L SB12 R or L SB15 R or L SB18 R or L SB21 R or L SB24 R or L With Utility Tray SB24UT R or L
• No shelf• One full -width false drawer front• Back panel is pre -drilled for optional roll -
out trays- CFO option is not available with cabinets
with a Utility Tray (UT)
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K ) 12 @B ) 15 @B ) 18 @B ) 21 @B - CFO @G
34 ½˝
24˝
Sink Base Single Door Full-Height
A C Specify R or L SB24FH R or L
• No shelf• Specify right or left hinging• Back panel is pre -drilled for optional
roll -out trays
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K ) 12 @B ) 15 @B ) 18 @B ) 21 @B ) CFO @G
34 ½˝
24˝
34 ½˝
24˝27˝
SB24B - SB39
SB24BUT - SB39UT
SB42BUT - SB48UT
34 ½˝
24˝ 27˝
24˝-39˝
SB42 - SB48
34 ½˝
24˝27˝
34 ½˝
24˝27˝
42˝- 48˝
E9Base Sink Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . SB30BUT-CG
Sink Base Double Door Full-Height
A SB24BFH SB27BFH SB30FH SB30BFH SB33FH SB33BFH SB36FH SB36BFH SB39FH SB42FH SB48FH
• No shelf• Cabinets with a “B” suffix have BUTT
doors without a center frame stile• Back panel is pre -drilled for optional roll -
out trays• Two Full -height doors
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K ) 12 @B ) 15 @B ) 18 @B ) 21 @B ) CFO @G
34 ½˝
24˝
Gray color coding indicates new product, size or code.
Sink Base Double Door
A 24” Deep SB24B SB27B SB30 SB30B SB33 SB33B SB36 SB36B SB39 SB42 SB48 27” Deep% SB2727B% SB3027% SB3027B% SB3327% SB3327B% SB3627% SB3627B% SB4227 24” Deep
With Utility Tray SB24BUT SB27BUT SB30UT SB30BUT SB33UT SB33BUT SB36UT SB36BUT SB39UT SB42UT SB48UT 27” Deep
With Utility Tray% SB2727BUT% SB3027UT% SB3027BUT% SB3327UT% SB3327BUT% SB3627UT% SB3627BUT% SB4227UT
• No shelf• One full -width false drawer front above
doors except SB42, SB42UT, SB4227, SB4227UT, SB48 and SB48UT which have two drawer fronts
• Cabinets with a “B” suffix have BUTT doors without a center frame stile
• Back panel is pre -drilled for optional roll -out trays
• Roll -out tray not available for 27” deep cabinets
- CFO option is not available with cabinets with a Utility Tray (UT)
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K ) 12 @B ) 15 @B ) 18 @B ) 21 @B - CFO @G
% Depth modification options are not availableGray color coding indicates new product, size or code.
Base Cabinets
Base
Cab
inet
s
E10 Base Sink Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . SB30BUT-CG
Sink Front Single Door
A C Specify R or L SF24 R or L
• Not trimmable• One full -width false drawer front• Toespace (toekick backer assembly)
included, shipped unattached• Bottom panel not supplied, order
separately. See Sink Front Bottom- Regardless of construction option,
cabinet is constructed and shipped the same
- SST @K - SDT @K - PST @K - PDT @K - ADT @K 12 @B 15 @B 18 @B 21 @B CFO @G
34 ½˝
Sink Front Single Door Full-Height
A SF24FH
• Not trimmable• Invertible for right or left hand use• Toespace (toekick backer) assembly
shipped unassembled to floor• Bottom panel not supplied, order
separately. See Sink Front Bottom- Regardless of construction option,
cabinet is constructed and shipped the same
- SST @K - SDT @K - PST @K - PDT @K - ADT @K 12 @B 15 @B 18 @B 21 @B CFO @G
34 ½˝
Sink Front Double Door
A SF24B SF30 SF30B SF36 SF36B
• Not trimmable• One full -width false drawer front• Cabinets with a “B” suffix have BUTT
doors without a center frame stile• Toespace (toekick backer assembly)
included, shipped unattached• Bottom panel not supplied, order
separately. See Sink Front Bottom- Regardless of construction option,
cabinet is constructed and shipped the same
- SST @K - SDT @K - PST @K - PDT @K - ADT @K 12 @B 15 @B 18 @B 21 @B CFO @G
34 ½˝
Gray color coding indicates new product, size or code.
E11Base Sink Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . SB30BUT-CG
Sink Front Double Door Full-Height
A SF24BFH SF30FH SF30BFH SF36FH SF36BFH
• Not trimmable• Cabinets with a “B” suffix have BUTT doors
without a center frame stile• Toespace (toekick backer assembly) included,
shipped unattached• Bottom panel not supplied, order separately.
See Sink Front Bottom- Regardless of construction option, cabinet is
constructed and shipped the same• Two Full -height doors
- SST @K - SDT @K - PST @K - PDT @K - ADT @K 12 @B 15 @B 18 @B 21 @B CFO @G
34 ½˝
Gray color coding indicates new product, size or code.
Deep Sink Base
A DSB30 DSB33 DSB36
• No shelf• Designed for use with “farm/farm house” style
sinks• Trimmable face frame rail across top• Face frame center stile included on all widths
to provide extra sink support• Back panel is pre -drilled for optional roll -out
trays
< Be sure to follow sink manufacturer specifications and instructions to ensure proper fit. Make sure to choose
a cabinet that is at least 4 1/2” wider than the outside sink dimensions
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 12 @B 15 @B 18 @B ) 21 @B ) CFO @GCabinet Max Width
DSB30 25 ½˝
DSB33 28 ½˝
DSB36 31 ½˝
9 ½˝
9 ½˝
9 ½˝
Max Height
Maximum Trimmable Opening Sizes
34 ½˝
24˝
Sink Base Angle
A C Specify R or L SBA36 R or L SBA42 R or L
• One full -width false drawer front above door• Full overlay sink front door and false drawer
front are similar in width to traditional overlay cabinets in order to avoid interference with adjacent cabinet doors. This exposes more of the cabinet face frame
• Top panel must be cut in field to receive sink• Use Base End Panel Filler (BEPF3 -34) if end is
exposed (requires 3” of space)• 29 1/4” minimum doorway clearance
required for delivery with cabinet door removed
• Adjacent cabinets can be installed directly without fillers
- SDT, PST and PDT orderable; shipped as SST• Note: Back panel (barrel) will not be plywood
when ADT is ordered
? Caution: If cabinet is installed next to an appliance deeper than 25”, it may interfere with the cabinet door opening.
Options available: A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front, which will result in a deeper countertop and overall base cabinet depth dimension
+ SST @K - SDT @K - PST @K - PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B ) CFO @G
17˝, 25 ½˝24˝ 24˝
34 ½˝
36" or 42"
17" or 25 ½˝
24˝
24˝
36" or 42"
18 /˝29 /˝
14 /˝ Ror 25 /˝ R
Base Cabinets
Base
Cab
inet
s
E12 Base Sink Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . SB30BUT-CG
Sink Front Angle
A C Specify R or L SFA36 R or L SFA39 R or L SFA42 R or L
• One full -width false drawer front above door
• Full overlay sink front door and false drawer front are similar in width to traditional overlay cabinets in order to avoid interference with adjacent cabinet doors. This exposes more of the cabinet face frame
• Toespace (toekick backer assembly) included, shipped unattached
• Bottom panel not supplied, order separately. See Sink Front Diagonal Bottom (SFDB2442)
- Regardless of construction option, cabinet is constructed and shipped the same
- SST @K - SDT @K - PST @K - PDT @K - ADT @K 12 @B 15 @B 18 @B 21 @B CFO @G
24˝
24˝
36˝, 39˝, or 42˝
36˝39˝
or 42˝
17˝21 ¼˝or 25 ½˝
34 ½˝
Sink Front Angle Full-Height
A SFA36FH
• Full overlay sink front door and false drawer front are similar in width to traditional overlay cabinets in order to avoid interference with adjacent cabinet doors. This exposes more of the cabinet face frame
• Invertible for right or left hand use• Toespace (toekick backer assembly)
included, shipped unattached• Bottom panel not supplied, order
separately. See Sink Front Diagonal Bottom (SFDB2442)
- Regardless of construction option, cabinet is constructed and shipped the same
- SST @K - SDT @K - PST @K - PDT @K - ADT @K 12 @B 15 @B 18 @B 21 @B CFO @G
34 ½˝
24˝
24˝
36˝
36˝
17˝
E13Base Sink Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . SB30BUT-CG
Removable Sink Front Double Door
A RSF30B RSF33B RSF36B RSF42
• Designed for easy field conversion from a standard sink base functionality to universal access open space
• Butt doors on 30”, 33”, and 36” widths; 42” is a double door with a center stile
• Permanently installed countertop support rail is 6 -1/2” high x 3/4” thick solid wood with a factory installed standard height matching false drawer front(s) providing a seamless sink base appearance. (1) full -width drawer front on 30”, 33” and 36” widths; (2) false drawer fronts on 42” wide
• If a shorter countertop support is required when used for universal access as additional vertical clearance, a 3” filler can be used in place of the 6 1/2” high support rail. Order separately
• 3/4” thick removable plywood bottom panel with support hardware / leveling legs and a removable clipped -on toeboard provided
• Matching solid wood baseboard provided for bottom panel support along the kitchen wall
• Frame, doors, floor bottom and toeboard can be flat packed for easy storage in a minimum amount of space
• Frame attached to bottom panel using quick connect (cam -locks) fasteners providing a solid tight joint
• Some field assembly required; instructions and hardware included
• Doors and frame are shipped pre -assembled• A Universal Access Panel (UAP) can be purchased separately to
conceal/protect the water and drain lines. See “Panels” section. Please specify specie and finish.
- Regardless of construction option, sink front is constructed and shipped the same
< Complete flooring under Universal Access Removable Sink Front to prepare for the future when sink front and plywood bottom is removed.
- SST @K - SDT @K - PST @K - PDT @K - ADT @K 12 @B 15 @B 18 @B 21 @B CFO @G
34 ½˝
24˝ RSF36B shown
Gray color coding indicates new product, size or code.
Sink Front Bottom
A SFB2336
• Designed to be used as an optional cabinet bottom with SF24, SF24B, SF30, SF30B, SF36, SF24FH, SF24BFH, SF30FH, SF30BFH and SF36FH sink fronts
• Fits SF36 and SF36FH without field trimming; field trim to length required for remaining sizes
• 36 7/16” long x 23 3/16” wide• 3/8” thick engineered wood with easy clean
natural woodgrain laminate on one side; backside unfinished
• Natural woodgrain laminate- Orderable in SDT, PST and PDT
constructions; shipped SST• Available in 3/8” thick plywood for All
Plywood Construction (ADT)• Installation screws included• One per carton
+ SST @K - SDT @K - PST @K - PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B CFO @G
23 /˝ 36 /˝
/˝
Base Cabinets
Base
Cab
inet
s
E14 Base Sink Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . SB30BUT-CG
Sink Front Diagonal Bottom
A SFDB4242
• Designed to be used as an optional cabinet bottom with SFA36, SFA36FH, SFA39 and SFA42 sink fronts
• Fits SFA42 without field trimming; field trim to length required for remaining sizes
• 42 3/16” x 42 3/16”• 3/8” thick engineered wood with easy
clean natural woodgrain laminate on one side; backside unfinished
• Natural woodgrain laminate- Orderable in SDT, PST and PDT
constructions; shipped SST• Available in 3/8” thick plywood for All
Plywood Construction (ADT)• Installation screws included• One per carton
+ SST @K - SDT @K - PST @K - PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B CFO @G
42 /˝42 /˝
/˝
Base Cabinets
E15Base Corner Cabinets
Base Corner CabinetsConstruction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
SST Construction - - - - - - - - - - - - - - - -K SDT Construction - - - - - - - - - - - - - - - -K PST Construction - - - - - - - - - - - - - - - -K PDT Construction - - - - - - - - - - - - - - - -K ADT Construction - - - - - - - - - - - - - - - -K 12 Depth Modification - - - - - - - - - - -B 15 Depth Modification - - - - - - - - - - -B 18 Depth Modification - - - - - - - - - - -B 21 Depth Modification - - - - - - - - - - -B HDS Half Depth Shelf - - - - - - - - - - - - -D FDS Full Depth Shelf - - - - - - - - - - - - - -D
1ST 1 Standard Tray - - - - - - - - - - - - - -D 2ST 2 Standard Trays - - - - - - - - - - - - -D 1FT 1 Standard Full -Width Tray - - - - -D 2FT 2 Standard Full -Width Trays - - - - -D 2DT 2 Deluxe Trays - - - - - - - - - - - - - - -D 2DF 2 Deluxe Full -Width Trays - - - - - -D CFO Cabinet Front Only - - - - - - - - - - -G
A C D BBC36/39 BR HDS
Base Blind Corner Cabinet Information
• Base blind corner cabinets provide access to corner space and permit adjustability of up to 2 7/8” maximum to aid in kitchen layout. Consult chart for “pull” dimensions and minimum wall space requirements
• “Pulling” the cabinet away from the corner (adding up to 2 7/8” maximum to the void area), and using the supplied filler and panel, provides clearance for opening doors and drawers when decorative hardware is used
• BR or BL indicates blind end of cabinet. Please specify.• Door hinged on same side as blind.• Blind side must be ordered left or right• Full overlay products must be pulled the maximum 2 7/8” for proper hardware clearance• Overlays (OL) available for all full overlay door styles except Fusion. Order separately.
Overlays are used to cover the exposed filler and frame. This provides a continuous door appearance. Overlays must be field cut (mitered) to required width determined by cabinet “pull”. See Filler Overlay Detail below.
• Note: A 3” Base Filler and Blind Panel is included with each BBC cabinet ordered, shipped unattached
BBC36/39
BBC39/42
BBC42/45
BBC45/48
BBC48/51
(C)Frame Opening
Traditional Overlay
(B) Cabinet
Width
24"
30"
36"
42"
48"
36"
39"
42"
45"
48"
NoPull
MaxPull
38 /"
41 /"
44 /"
47 /"
50 /"
5" h x 7 ½" w
5" h x 10 ½" w
5" h x 13 ½" w
5" h x 16 ½" w
5" h x 19 ½" w
7 ½" w x 20 ½ h10 ½" w x 20 ½ h13 ½" w x 20 ½ h16 ½" w x 20 ½ h19 ½" w x 20 ½ h
DrawerOpening
DoorOpening
NoPull
MaxPull
(A)Wall Space
(D) Door Hardware Clearance
1 /"
1 /"
1 /"
1 /"
1 /"
4 ½"
4 ½"
4 ½"
4 ½"
4 ½"
Base Blind
Corner
BBC36/39
BBC39/42
BBC42/45
BBC45/48
BBC48/51
Full Overlay
24"
30"
36"
42"
48"
36"
39"
42"
45"
48"
38 /"
41 /"
44 /"
47 /"
50 /"
5" h x 7 ½" w
5" h x 10 ½" w
5" h x 13 ½" w
5" h x 16 ½" w
5" h x 19 ½" w
7 ½" w x 20 ½ h10 ½" w x 20 ½ h13 ½" w x 20 ½ h16 ½" w x 20 ½ h19 ½" w x 20 ½ h
/"
/"
/"
/"
/" 3 /"
3 /"
3 /"
3 /"
3 /"
Base Blind Corner
AB
D
C
Filler and Panel
Frame Opening
BBC Cabinet (Blind Rig ht)
AdjoiningCabinet
Filler Overlay Detail Full Overlay Door Styles
No Pull Line
1” Pull
Blind Panel
3” Filler
BBCDoor
AdjoiningCabinet Door
Overlay
34 ½˝
24˝
Base Blind Corner CabinetBlind Right (BR) 1st option shown
3˝3˝
34 ½˝
24 /˝
Peninsula Base Blind CornerFDS option shown
(excluding door and drawer)
Sink PBBC24/27
PB
ll
Kitchen Side Peninsula Side
Blind panelw/3” filler
24 /˝
3” Fillerw/toekick
backer
Peninsula Base Blind Corner
Base
Cab
inet
s
E16 Base Corner Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . BEC24FH
Base Blind Corner
A D Specify BR or BL BBC36/39 BR or BL HDS BBC39/42 BR or BL HDS BBC42/45 BR or BL HDS BBC45/48 BR or BL HDS BBC48/51 BR or BL HDS
• Standard height top drawer
• Door hinged to frame center stile
• Blind Panel with 3” filler included, shipped unattached
• Do not pull cabinet more than 2 7/8” from corner
• Overlays (OL) available for all full overlay door styles except Fusion. Order separately
- Tray options are available for cabinets with select depth modifications. See Construction Options for specifics
- When depth is reduced to 12” or 15”, drawers become a false drawer front
• Back panel is pre -drilled for optional roll -out trays• Note: For tray or shelf options for select cabinets, replace
HDS (10d) with the option code of your choice
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K - 12 @B - 15 @B - 18 @B - 21 @B + HDS @D ) FDS @D - 1ST @D
2ST @D 1FT @D 2FT @D 2DT @D 2DF @D ) CFO @G
34 ½˝
24˝
Blind Right (BR)1st option shown
Peninsula Base Single Door Blind Corner
A C D Specify R or L PBBC24/27 R or L FDS
• Cabinet is 24” wide • Cabinet can be pulled
a maximum of 3” from wall
• One door on peninsula side
• One standard height top drawer opens on peninsula side
• Use to start a peninsula run
• One 3” filler (BF3) and toespace assembly (toekick backer) included, shipped unattached
• Blind Panel with 3” filler included, shipped unattached
• Overlays (OL) available for all full overlay door styles except Fusion. Order separately
• Front and back face frames are pre -drilled for optional roll out trays
• Note: Full depth shelf (FDS) option or a tray option must be selected for this cabinet
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D ) FDS @D ) 1ST @D
) 2ST @D 1FT @D 2FT @D ) 2DT @D 2DF @D CFO @G
3˝3˝
34 ½˝
24 /˝
FDS option shown*(excluding doors and drawer)
Base Cabinets
E17Base Corner Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . BEC24FH
Peninsula Base Butt Door Blind Corner
A D PBBC24/27B FDS
• Cabinet is 24” wide • Cabinet can be pulled
a maximum of 3” from wall
• Butt doors without frame center stile on peninsula side
• One standard height top drawer opens on peninsula side
• Use to start a peninsula run
• One 3” filler (BF3) and toespace assembly (toekick backer) included, shipped unattached
• Blind Panel with 3” filler included, shipped unattached
• Front and back face frames are pre -drilled for optional roll out trays
• Overlays (OL) available for all full overlay door styles except Fusion. Order separately
• Note: Full depth shelf (FDS) option or a tray option must be selected for this cabinet
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D ) FDS @D 1ST @D
2ST @D ) 1FT @D ) 2FT @D 2DT @D ) 2DF @D CFO @G
3˝3˝
34 ½˝
*24 /˝
FDS option shown*(excluding doors and drawer)
Base Lazy Susan
A BLS36
• Two 28” diameter high impact, pie -cut revolving white plastic shelves
• Shelf load rating of 15 lbs. per square foot, not to exceed 50 lbs.
• Doors and shelves revolve as one unit
• Available in Traditional Overlay door styles only
• Use Base End Panel Filler (BEPF3 -34) if end is exposed (requires 3” of space)
- SDT, PST and PDT orderable; shipped as SST
• Note: Back panel (barrel) will not be plywood when ADT is ordered
+ SST @K - SDT @K - PST @K - PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D FDS @D 1ST @D
2ST @D 1FT @D 2FT @D 2DT @D 2DF @D CFO @G
14 /˝
12˝
24˝
12˝24˝
36˝
36˝
6˝
6˝
28˝ shelf
diameter
34 ½˝
24˝ 24˝
Base
Cab
inet
s
E18 Base Corner Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . BEC24FH
Base Corner Revolving
A C Specify R or L BCR33 R or L BCR36 R or L
• Two 28” diameter high impact, pie -cut revolving white plastic shelves
• Shelves rotate independently of doors and each other
• Shelf load rating of 15 lbs. per square foot, not to exceed 50 lbs.
• Shelf height cannot be adjusted
• Two piece bi -fold door with independent adjustment
• Use Base End Panel Filler (BEPF3 -34) if end is exposed (requires 3” of space)
• 168° opening hinges on face frame door
• Full Overlay door style face frame stiles are notched to accept door hinges. Door hinging cannot be inverted in field
- SDT, PST and PDT orderable; shipped as SST• Note: Back panel (barrel) will not be plywood when ADT
is ordered
? Caution: If cabinet is installed next to an appliance deeper than 25”, it may interfere with the cabinet door opening. Options available:
A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front, which will result in a deeper countertop and overall base cabinet depth dimension
+ SST @K - SDT @K - PST @K - PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D FDS @D 1ST @D
2ST @D 1FT @D 2FT @D 2DT @D 2DF @D ) CFO @G
34 ½˝
24˝ 24˝Right Hand Hinging shown
14 /˝
9˝
24˝
9˝24˝
33˝
33˝
6˝
6˝
28˝ shelf
diameter
BCR33
14 /˝
12˝
24˝
12˝24˝
36˝
36˝
6˝
6˝
28˝ shelf
diameter
BCR36
Base Corner Revolving Wood Lazy Susan
A C Specify R or L BCR36WLS R or L
• Two 32” diameter pie -cut revolving wood shelves
• Shelves rotate independently of doors and each other
• Shelf load rating of 15 lbs. per square foot, not to exceed 50 lbs.
• Shelf height cannot be adjusted
• Two piece bi -fold door with independent adjustment
• Use Base End Panel Filler (BEPF3 -34) if end is exposed (requires 3” of space)
• 33” minimum doorway clearance suggested for delivery
• 168° opening hinges on face frame door• Full Overlay door style face frame stiles are notched to
accept door hinges. Door hinging cannot be inverted in field
- SDT, PST and PDT orderable; shipped as SST• Note: Back panel (barrel) will not be plywood when ADT
is ordered
? Caution: If cabinet is installed next to an appliance deeper than 25”, it may interfere with the cabinet door opening. Options available:
A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front, which will result in a deeper countertop and overall base cabinet depth dimension
+ SST @K - SDT @K - PST @K - PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D FDS @D 1ST @D
2ST @D 1FT @D 2FT @D 2DT @D 2DF @D ) CFO @G
Left Hand Hinging shown
34 ½˝
24˝ 24˝
9 /˝
12˝
24˝
12˝24˝
36˝
36˝
2 /˝
32˝ shelf
diameter
2 /˝
Base Cabinets
E19Base Corner Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . BEC24FH
Base Corner Fixed Shelf
A C Specify R or L BCFS36 R or L
• One fixed, pie -cut shelf in center position
• Two piece bi -fold door with independent adjustment
• 168° opening hinges on face frame door
• Full Overlay door style face frame stiles are notched to accept door hinges. Door hinging cannot be inverted in field
• Use Base End Panel Filler (BEPF3 -34) if end is exposed (requires 3” of space)
- SDT, PST and PDT orderable; shipped as SST
• Note: Back panel (barrel) will not be plywood when ADT is ordered
? Caution: If cabinet is installed next to an appliance deeper than 25”, it may interfere with the cabinet door opening. Options available:
A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front, which will result in a deeper countertop and overall base cabinet depth dimension
+ SST @K - SDT @K - PST @K - PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D FDS @D 1ST @D
2ST @D 1FT @D 2FT @D 2DT @D 2DF @D ) CFO @G
36˝
24˝ 12˝
14 /˝
36˝
24˝
12˝
6˝
6˝
34 ½˝
24˝24˝
Left Hand Hinging shown
Base Corner Angle Butt Full-Height
A BCA24BFH
• One adjustable shelf• Two full -height BUTT
doors without a frame center stile
• For use at the right or left end of cabinet run or in a corner
- SDT, PST and PDT orderable; shipped as SST
+ SST @K - SDT @K - PST @K - PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D FDS @D 1ST @D
2ST @D 1FT @D 2FT @D 2DT @D 2DF @D ) CFO @G
34 ½˝
24˝ 24˝
21 /˝ 21 /˝
Plan View of Adjustable Shelf
30 /˝ (front)
24˝
24˝
45
Base
Cab
inet
s
E20 Base Corner Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . BEC24FH
Base Angle Revolving
A C Specify R or L BAR36 R or L
• Two 28” diameter high impact, pie -cut revolving white plastic shelves
• Shelf load rating of 15 lbs. per square foot, not to exceed 50 lbs.
• Adjacent cabinets can be installed directly without fillers
• Full Overlay door is similar in width to Traditional Overlay cabinets in order to avoid interference with adjacent cabinet doors. This exposes more of the face frame
• Use Base End Panel Filler (BEPF3 -34) if end is exposed (requires 3” of space)
• Requires 36” of wall space in each direction• 29 1/4” minimum doorway clearance required for delivery
with cabinet door removed- SDT, PST and PDT orderable; shipped as SST• Note: Back panel (barrel) will not be plywood when ADT
is ordered
? Caution: If cabinet is installed next to an appliance deeper than 25”, it may interfere with the cabinet door opening. Options available:
A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front, which will result in a deeper countertop and overall base cabinet depth dimension
+ SST @K - SDT @K - PST @K - PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D FDS @D 1ST @D
2ST @D 1FT @D 2FT @D 2DT @D 2DF @D ) CFO @G
24˝24˝17˝
34 ½˝
Right Hand Hinging shown
17˝
24˝
24˝
36˝
36˝18 /˝
29 /˝
14 /˝ R
Base End Corner Full-Height
A BEC24FH
• One adjustable shelf• Two Full -height doors• For use at the right or
left end of cabinet run or in a corner
- SDT, PST and PDT orderable; shipped as SST
+ SST @K - SDT @K - PST @K - PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D FDS @D 1ST @D
2ST @D 1FT @D 2FT @D 2DT @D 2DF @D ) CFO @G
22 ½˝
24˝
24˝
17 /˝
17 /˝
63.5°
143˝
34 ½˝
24˝ 24˝
Base Cabinets
E21Base Corner Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . BEC24FH
Base End Angle Full-Height
A Specify R or L BEA12FH R or L
• Two adjustable shelves• Full and Traditional
overlay door widths are similar to avoid interference with adjacent cabinet doors. This exposes more of the cabinet face frame
• Specify right or left hand to designate 12” deep orientation
• Designed to transition from 24” deep base cabinet to 12” deep base cabinet
• Actual depth of 12” end is 12 1/8”
• 24” deep end not designed to be exposed
- SDT, PST and PDT orderable; shipped as SST
+ SST @K - SDT @K - PST @K - PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D FDS @D 1ST @D
2ST @D 1FT @D 2FT @D 2DT @D 2DF @D ) CFO @G
12˝12 /˝
34 ½˝
24˝
Right Hand hinging shown
12˝
24˝
12 /˝
17˝
/˝
45°
Base
Cab
inet
s
E22 Base Appliance Cabinets
Base Appliance CabinetsConstruction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
SST Construction - - - - - - - - - - - - - - - -K SDT Construction - - - - - - - - - - - - - - - -K PST Construction - - - - - - - - - - - - - - - -K PDT Construction - - - - - - - - - - - - - - - -K ADT Construction - - - - - - - - - - - - - - - -K 21 Depth Modification - - - - - - - - - - -B CFO Cabinet Front Only - - - - - - - - - - -G
A BMC24
Base Microwave Cabinet
A BMC24 BMC27 BMC30
• Matching interior • 1/2” thick fixed shelf • Deep bottom drawer with full extension
slides• Designed for countertop style
microwaves• Shelf top surface is 3/16” below face
frame rail top edge • Standard BMC uses side mount ball
bearing slides
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K - 21 @B ) CFO @G
Opening SizesCabinet
BMC24
BMC27
BMC30
15 /˝ high x 21˝ wide x 23 /˝ deep
15 /˝ high x 24˝ wide x 23 /˝ deep
15 /˝ high x 27˝ wide x 23 /˝ deep
24˝
34 ½˝
Base Oven Cabinet Universal
A BOCU30 BOCU33
• Designed for under counter mounting of single built -in ovens
• No back panel allowing full access to electrical connections
• Includes an adjustable oven platform supported with heavy -duty metal mounting brackets and screws which install into pre -drilled end panel holes at the four corners
• Not available in Hickory door styles• 1/2” end panels • 3” wide trimmable vertical stiles provide
oven opening width adjustment• 10” high trimmable horizontal rail along
the bottom provides opening height adjustment. May be trimmed to 1 1/2”
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 21 @B CFO @G
Opening Sizes
Cabinet Minimum Opening *Maximum Opening
BOCU30
BOCU33
* Bottom rail trimmed to 1 ½˝ high and top rail removed
24˝ wide x 18 ½˝ high
27˝ wide x 18 ½˝ high 31˝ wide x 28½˝ high
28˝ wide x 28 ½˝ high
34 ½˝
24˝
E23Base Appliance Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . BMC24
Dishwasher Panel
A DWP DWP-4
• 3/16” thick veneered plywood panel• 23 3/4” x 26” high panel • Provides finished look to dishwasher• Trimmed to fit installation• Finished one side only• Chiffon, Cotton and White panels are
painted Maple veneered plywood• Available in all finishes; Maple Accent
Glaze shipped standard finish• Offered individually or four per carton
+ SST @K + SDT @K + PST @K + PDT @K + ADT @K 21 @B CFO @G
GrainDirection
/˝
Decorative Dishwasher Panel
A DDWP
• 3/16” thick veneered plywood panel• Provides finished look to dishwasher• Panel trimmed to fit installation• Not available in arch door styles• May weigh up to 10 lbs. depending on
door style• Hardware to mount door to panel
included• Check with dishwasher manufacturers
instructions prior to installing panel • 23 3/4” wide by 26” high panel • 22 1/8” wide x 16” high door (both
traditional and full overlay)• One per carton
+ SST @K + SDT @K + PST @K + PDT @K + ADT @K 21 @B CFO @G
GrainDirection
Base Cabinets
Base
Cab
inet
s
E24 Base Appliance Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . BMC24
Drop-In Range Panel
A DIP30
• 3/4” thick solid wood panel• Matching front panel may be trimmed
to fit drop -in range• Must be installed between two base
cabinets• Toe Kick cover required on exposed
sides of toe kick platform• Available in all finishes; Maple Accent
Glaze shipped standard finish• Chiffon, Cotton and White are painted
Maple • Toespace (toekick backer) assembly
shipped unassembled to floor• Field trim as needed• One per carton
+ SST @K + SDT @K + PST @K + PDT @K + ADT @K 21 @B CFO @G
30˝
10˝
¾˝
Heat Shield
A HSD
• White epoxy -coated 18 gauge steel shield
• For use on Thermofoil door styles• Pre -drilled for mounting screws• Installation instructions and mounting
hardware included• Two per carton
+ SST @K + SDT @K + PST @K + PDT @K + ADT @K 21 @B CFO @G
1 /˝
30˝
Base Cabinets
E25Base Accessories
Base AccessoriesConstruction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
CH Cherry - - - - - - - - - - - - - - - - - - - - -P HK Hickory - - - - - - - - - - - - - - - - - - - -P MP Maple - - - - - - - - - - - - - - - - - - - - -P RO Red Oak - - - - - - - - - - - - - - - - - - -P TH Thermofoil - - - - - - - - - - - - - - - - -P
A FA3-30
Base Wastebasket Floor Mount Kit Single
A BWBFMK BWBFMK-6
• White epoxy coated wire• Requires base cabinet roll -out tray in the
bottom position, not included• Fits base cabinets 15” or wider• Includes 30 -qt. white plastic bin• Installation instructions and mounting
hardware included• Offered individually or six per carton
CH @P HK @P MP @P RO @P TH @P
9 ½˝
18˝
15 ½˝
Base Wastebasket Floor Mount Kit Double
A BWBFMK-2
• White epoxy coated wire• Bins mounted on white laminated
platform with full extension slides• 11 1/2” wide pull out, fits minimum 15”
single door cabinet or 27” double door cabinet unless cabinet is butt door
• Includes two 27 -qt. white plastic bins• Load rated at 40 lbs.• Does not fit 9” or 12” wide base or 27”
wide base with center stile• Installation instructions and mounting hardware included• One per carton
CH @P HK @P MP @P RO @P TH @P
22˝ 11 ½˝
19 ½˝
Base Wastebasket Top Mount Kit
A BWBTK15 BWBTK18-2
• Fits B15 or B18 cabinets• BWBTK15 includes one 35 qt. white
plastic basket and one 5 1/2” deep white plastic tray for garbage bag storage
• BWBTK18 includes two 35 qt. white plastic baskets (no bag storage tray)
• Top mounted wastebasket assembly rolls out on full -extension ball -bearing slides
• Hardwood veneer tray supports easily removable basket(s)
• 35 qt. basket is 10 1/2” x 14 5/8” x 18” high• Installation instructions and mounting hardware included• One per carton
CH @P HK @P MP @P RO @P TH @P
BWBTK18-2 shown
Base
Cab
inet
s
E26 Base Accessories
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . FA3-30
Base Swing-Out Shelves
A BSOS42 BSOS42-3 BSOS45 BSOS45-3
• For use in Base Blind Corner Cabinets (BBC)
• May be installed for right or left blind application
• Two high -impact plastic half -moon swing -out shelves in white
• BSOS42 shelves supports up to 38 lbs. and is 31 9/16” x 12 1/2”
• BSOS45 shelves supports up to 45 lbs. and is 33” x 15 1/2”
• Bottom shelf pulls out for easy access• Fixed height shelves attach to center post (included) and
rotate independently to 90°• BSOS42 requires 13 1/4” minimum cabinet opening
(BBC42/45)• BSOS45 requires 16 1/16” minimum cabinet opening
(BBC45/48 and BBC48/51)• Installation instructions and mounting hardware included• Offered individually or three per carton
CH @P HK @P MP @P RO @P TH @P33˝
BSOS45 shown
15 ½˝
Knife Section Cutting Center Kit
A C KSCCK15 9 knife slots
KSCCK18 12 knife slots KSCCK21 15 knife slots
KSCCK24 18 knife slots
• Cutting board must be removed for use• Replaces standard height top drawer• Requires use of existing cabinet’s drawer
front and 3/4 extension side mounted outer drawer slide members
• Includes a 1 5/8” high natural woodgrain laminated engineered wood drawer
• Includes a 3/4” thick removable solid hardwood cutting board that stores above the drawer core
• Cutting board has bread board front and back edges with a full -width finger recess on opposite sides so the board can be reversed
• Cutting board is stored in cabinet using two almond colored epoxy coated metal channels
• Cutting board can be removed without removing drawer. Please follow instructions provided
• Drawer can be pulled out independently from cutting board for convenient drawer access
• Includes a removable drawer insert with a full -width solid hardwood knife holder and cork pad handle rest
• Includes both outer and inner drawer slide members for converting Dovetail full extension drawers to 3/4 extension
• Not available with Dovetail 3/4” thick hardwood full extension drawer
• Installation instructions and mounting hardware included• One per carton
CH @P HK @P MP @P RO @P TH @P
Cutlery Divider
A CDI18 CDI18-12
• Natural woodgrain laminate• Five compartment cutlery organizer for
18” wide cabinets; can be cut down for 15” wide cabinets
• When used in 18” wide, 3/4” dovetail deluxe drawer base, 1 7/16” must be field cut off back edge
• Offered individually or 12 of one kind per carton
CH @P HK @P MP @P RO @P TH @P
2 ½˝
12 /˝20 /˝
Suggested layouts are shown
2 /˝
19 /˝
(including dividers)
9 /˝
Base Cabinets
E27Base Accessories
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . FA3-30
Drawer Partition Kit
A DPK
• Natural finish hardwood• For use in all drawers; standard, dovetail
and Base Deep Tray Kits (BDTK)• Kit contains two self -adhesive end
brackets and one natural finished hardwood divider
• Brackets are clear plastic and include two holes for optional screw attachment to drawer side (screws not included)
• Field trim divider to fit• Installation instructions and mounting hardware included• One per carton
CH @P HK @P MP @P RO @P TH @P
Partition
BracketDrawer Side
or Front/Back
½˝
3 /˝20 ½˝
Drawer Organizer Kit Narrow
A DOKN
• Natural finish hardwood• Adjustable drawer organizing system• Fits B15 and wider standard and dovetail
drawers• Can be used in tandem with another
DOKN or DOKW in wider drawers• DOKN includes: two dividers 14 17/32” long x 2 1/4” high
x 3/8” thick; three dividers 2 11/16” long x 2 1/4” high x 3/8” thick; four dividers 4 1/4” long x 2 1/4” high x 3/8” thick• Installation instructions and mounting hardware included• One per carton
CH @P HK @P MP @P RO @P TH @P
2 /˝
19 /˝ 15 /˝
(including dividers)
Suggested layouts are shown
Base
Cab
inet
s
E28 Base Accessories
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . FA3-30
Drawer Organizer Kit Wide
A DOKW
• Natural finish hardwood• Adjustable drawer organizing system• Fits B21 and wider standard and dovetail
drawers• Can be used in tandem with another
DOKN or DOKW in wider drawers• DOKW includes: three dividers 14 17/32” long x 2 1/4”
high x 3/8” thick; four dividers 2 17/32” long x 2 1/4” high x 3/8” thick; two dividers 5 17/32” long x 2 1/4” high x 3/8” thick; four dividers 8 17/32” long x 2 1/4” high x 3/8” thick• Installation instructions and mounting hardware included• One per carton
CH @P HK @P MP @P RO @P TH @P
Pegged Deep Drawer Organizer
A PDDO30 PDDO36
• Natural finish hardwood• For securing pots, pans, plates and other
bulky items in deep drawers of cabinets• Fits standard and dovetail drawers• PDD030 fits in BD30 -3D and BPPS30 -2D
cabinet deep drawers Overall dimensions: 24 7/8” wide x 19 1/8” deep x 6 1/2”
high including pegs• PDD036 fits in BD36 -3D and BPPS36 -2D cabinet deep
drawers Overall dimensions: 30 7/8” wide x 19 1/8” deep x 6 1/2” high including pegs• Kit includes eight 6” long triangular shaped natural
finished solid hardwood pegs with a metal locating pin extended out of one end
• Additional triangular hardwood pegs are available in quantity of 4; order SKU: PDOPK/4CT
• One per carton
CH @P HK @P MP @P RO @P TH @P
19 /˝
6 ½˝
24 /˝
PDDO30 shown
Foil Box Rack
A FBRK18
• White epoxy coated wire• Designed to fit a Sink Base 36 (SB36)• Installation instructions and mounting
hardware included• One per carton
CH @P HK @P MP @P RO @P TH @P
8˝
6 ¼˝11 ¼˝
Base Cabinets
E29Base Accessories
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . FA3-30
Spice Drawer Insert Kit
A Height Width SDIK15 1 5/8” 10” SDIK18 1 5/8” 13” SDIK21 1 5/8” 16” SDIK24 1 5/8” 19”
• Textured white polymer plastic• Trimmed to fit installation• One per carton
CH @P HK @P MP @P RO @P TH @P
1 /˝19 /˝
10˝ 13˝ 16˝ 19˝
Towel Bar
A TB
• White epoxy coated wire• Three 10” long towel bars• Designed to fit SB33 cabinets or wider• Installation instructions and mounting
hardware included• One per carton
CH @P HK @P MP @P RO @P TH @P
12 /˝
Sliding Towel Bar - Chrome
A STB
• Three -prong chrome -plated 17” long wire towel bars
• Slides on ball bearing slides• Designed for sink base or 21” deep vanity
bowl cabinets• Mounts to interior of cabinet side panel• Installation instructions and mounting
hardware included• One per carton
CH @P HK @P MP @P RO @P TH @P
17 /˝(unextended)
Wire Tray Divider Kit
A WTDK16 WTDK16-5PR
• White epoxy coated wire• Installation instructions and mounting
hardware included• Offered as a pair or five pairs per carton
CH @P HK @P MP @P RO @P TH @P
11˝
16˝
Base
Cab
inet
s
E30 Base Accessories
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . FA3-30
Wire Tray Divider Roll-Out
A WTDRO9 2 partitions WTDRO12 3 partitions
• White epoxy coated wire• 3/4 extension sides• For 9” or 12” wide base cabinets• Load rated at 20 lbs.• Installation instructions and mounting
hardware included• One per carton
CH @P HK @P MP @P RO @P TH @P
6 /˝ 9 /˝
13 ¾˝
22˝
WTDR09 shown
Utility Tray Kit
A UTK12 UTK12-20PR UTK22 UTK22-20
• Removable high -impact white plastic tray installs on backside of drawer front for convenient out -of -sight storage of small items, soap, scouring pads, etc.
• UTK22 fits sink base cabinets 27” through 39” wide
• UTK12 fits sink base cabinets 30” or wider
• Concealed self -closing hinges allow drawer front to tilt down 51º for tray access
• Hinge detent holds drawer front in full open position• Order decorative hardware separately• Installation instructions and mounting hardware included• Offered one pair or 20 per carton
< If installing one UTK12 on a 24” or 27” wide sink base, consider utilizing the second tray on the backside for storage
CH @P HK @P MP @P RO @P TH @P
2˝
UTK12
3 /˝11˝
3 /˝ 22˝
2 /˝
UTK22
Under Sink Tote
A UST12 UST15
• White epoxy coated wire• 3/4 extension roll -out assembly mounts
to floor of cabinet• Designed for under sink storage;
maximizes space around plumbing fixtures
• Load rated at 20 lbs.• Installation instructions and mounting
hardware included• One per carton
CH @P HK @P MP @P RO @P TH @P
18 /˝
15 ¼˝
12˝ 15˝
Toekick Backer
A TKBK6 TKBK36
• All plywood toeboard backer assembly• Use in place of engineered wood
toeboard backer assembly• Provides support for matching toe kick
cover• TKBK6 for use with Base Fillers (BF3 and
BF6)• TKBK36 for use with Sink Fronts (SF and
SFA) and Drop -in Range Panel (DIP30)• Field cut to length as required• Shipped assembled• Must order with All Plywood Construction (ADT)• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
6˝
36˝
Base Cabinets
E31Base Accessories
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . FA3-30
Base Filler
A BF3 BF6
• 3/4” thick solid wood• Backside of filler not finished• For right or left hand use• Available in all finishes; Maple Accent
Glaze shipped standard finish• Chiffon, Cotton and White are painted
Maple • Overlays (OL) available for all full
overlay door styles except Fusion. Order separately
• Toespace (toekick backer assembly) included, shipped unattached
+ CH @P + HK @P + MP @P + RO @P + TH @P
3˝, 6˝
34 ½˝
¾˝
Base Fluted Filler
A BFF3
• Use between cabinets or to create a column effect. Can be combined with other moldings and panels for decorative effects
• Solid wood• Four flutes• Backside of filler not finished• Available in all finishes; Maple Accent
Glaze shipped standard finish• Chiffon, Cotton and White are painted Maple • One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
6˝
1 ½˝
3˝
¾˝
34 ½˝
3˝
¾˝
/˝
Filler Angle
A FA3-30
• Fills 3” space between cabinets that are offset 3”
• 3/4” thick solid wood• For right or left hand use• Backside of filler not finished• Available in all finishes; Maple Accent
Glaze shipped standard finish• Chiffon, Cotton and White are painted
maple and shipped standard finish• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
3˝¾˝
30˝
3˝
3˝
Base
Cab
inet
s
E32 Base Accessories
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . FA3-30
Fluted Filler Angle
A FFA3-30
• Fills 3” space between cabinets that are offset 3”
• Five flutes• 3/4” thick solid wood• For right or left hand use• Backside of filler not finished• Chiffon, Cotton and White are painted
Maple • Available in all finishes; Maple Accent
Glaze shipped standard finish• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
¾˝
30˝
1 ½˝
1 ½˝
3˝
3˝
Base Filler Corner
A BFC3
• Used to provide clearance between cabinets when corner space is not used
• 3/4” thick solid wood• 3” faces• Available in all finishes; Maple Accent
Glaze shipped standard finish• Chiffon, Cotton and White are painted
Maple • Shipped assembled• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
3˝x 3˝
34 ½˝
¾˝
Base Filler Pull-Out
A BFP3 BFP6
• Three adjustable natural finished hardwood shelves
• 3/4” thick solid wood pre -drilled filler included, shipped unattached
• Wood filler aligns with face frames of adjacent wall cabinets
• Natural finish hardwood interior• Unit slides on full extension runners; one
on the top and two at the bottom• Must be installed between two base cabinets• Overlays (OL) available for all full overlay door styles
except Fusion. Order separately• Available in all finishes; Maple Accent Glaze shipped
standard finish• Chiffon, Cotton and White are painted Maple • BFP3 3” wide pull -out 2 3/4” shelf width 1 3/4” usable space between chrome rails 3 1/16” required between adjacent cabinets• BFP6 6” wide pull -out 5 3/4” shelf width 4 3/4” usable space between chrome rails 6 1/16” required between adjacent cabinets
+ CH @P + HK @P + MP @P + RO @P + TH @P
3˝, 6˝
29 /˝34 ½˝
Base Cabinets
E33Base Accessories
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . FA3-30
Filler Overlay
A OL3-30 OL6-30
• Attaches to 3” or 6” wide filler, not included. Order separately
• 3/4” thick with matching profile on all four edges, sized to match door height of adjacent cabinet
• Spacers installed on backside to align with doors of adjacent cabinet
• Mounting hardware included• Available for all Full Overlay door styles,
except Fusion• Specify door style, specie and finish• One per carton
+ CH @P HK @P + MP @P + RO @P + TH @P
30˝
3˝6˝
Overlay FillerNot
Included29 ¼˝
2 /˝5 /˝
Base Filler Corner Overlay
A BFOLC3
• Used to provide clearance between cabinets when corner space is not used
• Designed to align with top of adjacent cabinet drawer fronts and bottom of door
• Overlays are attached and have matching profile top, bottom, and outside vertical edges
• Available for all Full Overlay door styles, except Fusion
• Shipped assembled
+ CH @P HK @P + MP @P + RO @P + TH @P
3˝ x 3˝
34 ½˝ 29 ¼˝
Base Box
A BB3-2434 BB6-2434
• Front is 3/4˝ solid wood• Finished front and both sides • End panels are recessed 1/4”• Vertical wood grain• May be used on either right or left end• Available in all finishes; Maple Accent
Glaze shipped standard finish• Chiffon and Cotton glaze shipped
standard finish • Chiffon, Cotton and White are painted Maple • All finishes available on Standard Construction (SST, SDT)• All finishes, except white, available on Plywood ends (PST,
PDT)• Not available with All Plywood Construction (ADT)• One per carton
+ CH @P HK @P + MP @P + RO @P + TH @P
24˝ 3˝, 6˝
34 ½˝
¾˝¼˝
Base Column
A 15” Deep BC3-1534 BC6-1534 27” Deep BC3-2734 BC6-2734
• Front is 3/4˝ solid wood• No toe kick• Finished front and both sides • Flush end panels• Vertical wood grain• May be used on either right or left end• Available in all finishes; Maple Accent
Glaze shipped standard finish• Chiffon, Cotton and White available on
laminate end panels (SST, SDT)• Chiffon, Cotton and White are painted Maple • All finishes available on Standard Construction (SST, SDT)• All finishes, except white, available on Plywood ends (PST,
PDT)• Not available with All Plywood Construction (ADT)• One per carton
+ CH @P HK @P + MP @P + RO @P + TH @P
¾˝
15˝, 27˝ 3˝, 6˝
34 ½˝
Base
Cab
inet
s
E34 Base Accessories
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . FA3-30
Base Column Fluted
A 15” Deep BCF6-1534 27” Deep BCF6-2734
• Front is 3/4˝ solid wood• Six flutes• No toe kick• Finished front and both sides • Flush end panels• Vertical wood grain• May be used on either right or left end• Available in all finishes; Maple Accent Glaze
shipped standard finish• Chiffon and Cotton glazes are shipped as standard finish• Chiffon, Cotton and White are painted Maple • All finishes available on Standard Construction (SST, SDT)• All finishes, except white, available on Plywood ends (PST, PDT)• Not available with All Plywood Construction (ADT)• One per carton
+ CH @P HK @P + MP @P + RO @P + TH @P
¾˝
15˝, 27˝ 6˝
34 ½˝
6˝
1 ½˝
Base End Panel
A BEP BEP-6
• Used to trim or flush out laminate exposed end of base cabinet
• For right or left hand use• 3/16” thick veneered plywood panel, except
White, finished on one side; grain runs lengthwise • 3/16” thick laminate panel for White; finished on
one side only• Available in all finishes; Maple Accent Glaze
shipped standard finish• Chiffon and Cotton are painted Maple• Toespace notch must be field cut• Trimmed to fit installation• Offered individually or six per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
Field cutToespace
Grain Direction
/˝
23 ¼˝
34 ½˝
Base End Panel Filler
A BEPF3-34 BEPF3-34-2 BEPF6-34
• Used on the end of cabinet run to conceal dishwasher or cap end of BCFS/BCR/BAR/BLS/SFA cabinet
• For right or left hand use• Available in all finishes; Maple Accent Glaze
shipped standard finish• Chiffon, Cotton and White have painted Maple
Filler• All finishes available on standard constructions
(SST, SDT)• All finishes, except White, are available on Plywood (PST, PDT)
constructions• Toespace notch must be field cut• BEPF3 -34 offered individually or two per carton; BEPF6 -34 only
offered individually
+ CH @P + HK @P + MP @P + RO @P + TH @P
24˝
34 ½˝
3˝, 6˝Field cutToespace
Filler
3˝, 6˝
/˝
¾˝
2 /˝ 5 /˝
Exterior Interior
¼˝
Matching Base End Panel
A MBEP2434
• Provides a finished furniture look to base cabinet ends
• Includes end panel with decorative door• For right or left hand use• Toespace notch must be field cut• 3/16” thick veneered plywood panel, except
Arbor Falls II and Whitebay II• 3/16” thick white laminate panel for Arbor Falls II
and Whitebay II• Available in all door styles and finishes, excluding
arch shape• Traditional overlay doors are 22 1/4” x 28” tall shipped attached to
panel • Full overlay doors are 23 5/8” x 29 1/4” tall shipped unattached to
panel. When installed, door overlaps cabinet frame edge to provide matching reveals
• Chiffon and Cotton are painted Maple• One per carton
Field cutToespace
/˝
34 ½˝
23 ¼˝
+ CH @P + HK @P + MP @P + RO @P + TH @P
Tall Cabinets
F1Tall Cabinets
Tall Cabinets
Note: Standard tall cabinet box depth is 12” or 24” unless stated otherwise. Add door thickness with bumpers for total depth.
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
SST Construction - - - - - - - - - - - - - - - -K SDT Construction - - - - - - - - - - - - - - - -K PST Construction - - - - - - - - - - - - - - - -K PDT Construction - - - - - - - - - - - - - - - -K ADT Construction - - - - - - - - - - - - - - - -K 09 Depth Modification - - - - - - - - - - -B 15 Depth Modification - - - - - - - - - - -B 18 Depth Modification - - - - - - - - - - -B 21 Depth Modification - - - - - - - - - - -B CFO Cabinet Front Only - - - - - - - - - - -G
A C U1884 L
Tall Utility Cabinet 12” Deep
A C Specify R or L
84” High U1584 R or L U1884 R or L U2484 R or L U2484B U3084B U3684B 90” High U1590 R or L U1890 R or L U2490 R or L U2490B U3090B U3690B
A C Specify R or L
93” High U1593 R or L U1893 R or L U2493 R or L U2493B U3093B U3693B 96” High U1596 R or L U1896 R or L U2496 R or L U2496B U3096B U3696B
• Fixed shelf between top and bottom section with adjustable shelves in top section: 84” high -no shelves; 90” and 93” high -1 shelf; 96” high -2 shelves
• Cabinets with a “B” suffix have BUTT doors without a center frame stile
• If arch configuration is required for upper door(s), please specify
• Tall doors are two -piece panel construction except Arbor Falls II, Fusion and Whitebay II
• Arbor Falls II and Whitebay II tall doors have a single raised panel profile
• 30” and 36” wide cabinets have 3” wide center stile in upper section only
• Interior height of tall section on 84”, 93” and 96” tall cabinets is 60 15/16”; 90” tall is 61 7/16”
• 93” and 96” tall cabinets include toe kick platform, shipped unattached
• Toe Kick cover required on exposed sides of toe kick platform
• End panels of bottom section are pre -drilled for optional shelves
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K ) 09 @B 15 @B 18 @B 21 @B ) CFO @G
12˝
84˝90˝93˝96˝
12˝
84˝90˝93˝96˝
Gray color coding indicates new product, size or code.
Construction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
<If ordering a 93” or higher unit, consider ordering a tall end panel to flush out the exposed side
Tall
Cabi
nets
F2 Tall Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . U1884L
Tall Utility Cabinet 24” Deep
A C Specify R or L 84” High U158424 R or L U188424 R or L U248424 R or L U248424B U308424B U368424B 90” High U159024 R or L U189024 R or L U249024 R or L U249024B U309024B U369024B
A C 93” High U159324 R or L
U189324 R or L U249324 R or L U249324B U309324B U369324B 96” High U159624 R or L U189624 R or L U249624 R or L U249624B U309624B U369624B
• Fixed shelf between top and bottom section with adjustable shelves in top section: 84” high -no shelves; 90” and 93” high -1 shelf; 96” high -2 shelves
• Cabinets with a “B” suffix have BUTT doors without a center frame stile
• If arch configuration is required for upper door(s), please specify
• Tall doors are two -piece panel construction except Arbor Falls II, Fusion and Whitebay II
• Arbor Falls II and Whitebay II tall doors have a single raised panel profile
• 30” and 36” wide cabinets have 3” wide center stile in upper section only
• Interior height of tall section on 84”, 93” and 96” tall cabinets is 60 15/16”; 90” tall is 61 7/16”
• 93” and 96” tall cabinets include toe kick platform, shipped unattached
• Toe Kick cover required on exposed sides of toe kick platform
• Accessory Roll -out Trays (ROT) not available when cabinet is reduced to 15” depth
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B ) 15 @B ) 18 @B ) 21 @B ) CFO @G
24˝
84˝90˝93˝96˝
24˝
84˝90˝93˝96˝
Gray color coding indicates new product, size or code.
Utility Front
A C Specify R or L
84” High UF1584 R or L UF1884 R or L UF2484 R or L UF2484B 90” High UF1590 R or L UF1890 R or L UF2490 R or L UF2490B 93” High UF1593 R or L UF1893 R or L UF2493 R or L UF2493B 96” High UF1596 R or L UF1896 R or L UF2496 R or L UF2496B
• Includes face frame and appropriate hinged doors only
• Cabinets with a “B” suffix have BUTT doors without a center frame stile
• Tall doors are two -piece panel construction except Arbor Falls II, Fusion and Whitebay II
• Arbor Falls II and Whitebay II tall doors have a single raised panel profile
• If arch configuration is required for upper door(s), please specify
• Specify R or L hinging, except for Butt doors
• Does not include toespace (toekick backer) assembly
+ SST @K + SDT @K + PST @K + PDT @K + ADT @K 09 @B 15 @B 18 @B 21 @B CFO @G
79 ½˝85 ½˝88 ½˝91 ½˝
79 ½˝85 ½˝88 ½˝91 ½˝
15˝, 18˝, 24˝
15˝, 18˝, 24˝
Gray color coding indicates new product, size or code.
<If ordering a 93” or higher unit, consider ordering a tall end panel to flush out the exposed side
Tall Cabinets
F3Tall Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . U1884L
Pantry Cabinet Butt Door
A PC3684B PC3690B PC3693B PC3696B
• Fixed shelf between top and bottom section with adjustable shelves in top section: 84” high -no shelves; 90” and 93” high -1 shelf; 96” high -2 shelves
• Toe Kick cover required on exposed sides of toe kick platform
• Cabinets with a “B” suffix to have BUTT doors without frame center stile
• 3” wide center stile in upper section only• 93” and 96” tall cabinets include toe kick platform,
shipped unattached• If arch configuration is required for upper door(s),
please specify• Tall doors are pre -drilled for Door Pantry Rack
(DPR18) installation except Arbor Falls II and Whitebay II, which require field drilled holes
• Full overlay doors require special hardware for Door Pantry Rack (DPR) installation; included with kit
• Tall doors are two -piece panel construction except Arbor Falls II, Fusion and Whitebay II
• Arbor Falls II and Whitebay II tall doors have a single raised panel profile
• 1” thick center partition runs full height in bottom section• End panels and center partition in bottom section are pre -drilled
for half -depth adjustable shelves (not included)• Will not accept Roll -out Trays (ROT)• Full Pantry Configuration options include: two Pantry Door Racks
(DPR18), two Swing Out Pantry Racks (SPR) and two Pantry Cabinet Shelf Kits (PCSK), all items are ordered individually
• Pantry Cabinet can be installed next to a wall or refrigerator. Optional interior racks will function if door opening is restricted to no less than 90°
• Reinforced cabinet bottom
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B 15 @B 18 @B 21 @B ) CFO @G
84˝90˝93˝96˝
24˝96” shown
PCSK36 PCSK36
SPRSPR
DPR18 DPR18
36˝
24˝
Pantry Cabinet Accessory Configuration
Gray color coding indicates new product, size or code.
Door Pantry Rack
A DPR18
• Solid, natural finished, hardwood unit, adjustable shelves and fences
• Includes: six adjustable shelves, 12 wire supports and seven 2” high fences
• Rack is designed to support up to 50 lbs (3 1/2 lbs. per shelf)
• Mounts to backsides of tall doors on all pantry and 18” or 36” wide utility cabinets,
• Pantry and utility doors are pre -drilled except Arbor Falls II and Whitebay II which must be field drilled for mounting Door Pantry Rack
• Full Overlay door styles require drilling at the bottom end of rack and special hardware that is included for Door Pantry Rack installation
• One per carton
+ SST @K + SDT @K + PST @K + PDT @K + ADT @K 09 @B 15 @B 18 @B 21 @B CFO @G
58 ¼˝
11˝
4 /˝
Swing-Out Pantry Rack
A SPR
• Solid, natural finished, hardwood unit, adjustable shelves, fences and wire shelf supports
• Includes: 12 adjustable shelves, 24 wire shelf supports and 14 - 2” high fences
• Rack is designed to support up to 50 lbs., (3 1/2 lbs. per shelf)
• Pantry cabinet is pre -drilled for installation• Mounting hardware included• One per carton
+ SST @K + SDT @K + PST @K + PDT @K + ADT @K 09 @B 15 @B 18 @B 21 @B CFO @G
11˝
58 ¼˝
8˝
<If ordering a 93” or higher unit, consider ordering a tall end panel to flush out the exposed side
Tall
Cabi
nets
F4 Tall Appliance Cabinets
<If ordering a 93” or higher unit, consider ordering a tall end panel to flush out the exposed side
Tall Appliance CabinetsConstruction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
SST Construction - - - - - - - - - - - - - - - -K SDT Construction - - - - - - - - - - - - - - - -K PST Construction - - - - - - - - - - - - - - - -K PDT Construction - - - - - - - - - - - - - - - -K ADT Construction - - - - - - - - - - - - - - - -K CFO Cabinet Front Only - - - - - - - - - - -G
A OCU2784B
Oven Cabinet Universal
A 84” High OCU2784B OCU3084 OCU3084B OCU3384 OCU3384B 90” High OCU2790B OCU3090 OCU3090B OCU3390 OCU3390B 93” High OCU2793B OCU3093B OCU3393B 96” High OCU2796B OCU3096 OCU3096B OCU3396 OCU3396B
• Fixed shelf between top and bottom section with adjustable shelves in top section: 84” high -no shelves; 90” and 93” high -1 shelf; 96” high -2 shelves
• Three full -width drawer openings at bottom
• Includes one full -width drawer. Order additional drawer(s) as needed. See Oven Drawer Kit (ODK)
• Cabinets with a “B” suffix have BUTT doors without a center frame stile
• Face -mounted door hinges provide matching frame reveals
• Center section accommodates single and double ovens by trimming or removing horizontal cross rails
• 3” wide trimmable vertical stiles provide opening width adjustment
• Face frame rails are attached to stiles with screws on the back side for easy removal
• 93” and 96” tall cabinets include toe kick platform, shipped unattached
• Toe Kick cover required on exposed sides of toe kick platform
• Includes adjustable 1” thick engineered wood oven platform with heavy -duty mounting brackets and screws that install into pre -drilled end panel holes. Order additional support platform kits as needed. See Oven Cabinet Shelf Platform (OCSP)
• See Cabinet Specifications and Options for oven cutout dimensions
• All Plywood Construction (ADT) platform is 1” thick plywood with natural woodgrain laminate on both sides
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K ) CFO @G
84˝90˝93˝96˝
24˝96” shown
Gray color coding indicates new product, size or code.
Tall Cabinets
F5Tall Appliance Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . OCU2784B
Oven Cabinet Single
A 84” High OCS2784B OCS3084 OCS3084B OCS3384 OCS3384B 90” High OCS2790B OCS3090 OCS3090B OCS3390 OCS3390B 93” High OCS2793B OCS3093B OCS3393B 96” High OCS2796B OCS3096 OCS3096B OCS3396 OCS3396B
• Fixed shelf between top and bottom section with adjustable shelves in top section: 84” high -no shelves; 90” and 93” high -1 shelf; 96” high -2 shelves
• See Cabinet Specifications and Options for oven cutout dimensions
• One adjustable shelf in bottom section• Cabinets with a “B” suffix have BUTT
doors without a center frame stile• Cabinet doors are: 5 1/2” shorter on top
than the bottom for 84” high cabinets, are equal height on 90” high cabinets, 3 1/2” taller on top than the bottom for 93” high cabinets and are 6 1/2” taller on top than the bottom for 96” high cabinets
• If arch configuration is required for upper door(s), please specify
• Center section accommodates single ovens • 3” wide, trimmable stiles provide opening width
adjustment for painted finishes. All stain finishes have 1 1/2” wide removable, trimmable vertical stiles for easy adjustment
• 93” and 96” tall cabinets include toe kick platform, shipped unattached
• Toe Kick cover required on exposed sides of toe kick platform
• Includes adjustable 1” thick engineered wood oven platform with heavy -duty mounting brackets and screws that install into pre -drilled end panel holes. Order additional support platform kits as needed. See Oven Cabinet Shelf Platform (OCSP)
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K ) CFO @G
84˝90˝93˝96˝
24˝96” shown
Gray color coding indicates new product, size or code.
Oven Drawer Kit
A ODK27 ODK30 ODK33
• Available in all door styles• Available with solid hardwood dovetail
drawer core with under -mount drawer glides
• Kit includes; 1 drawer front, 1 drawer core, slides and all mounting hardware
• Not available in Plywood and All Plywood Construction
- PST orderable, shipped as SST- PDT and ADT orderable, shipped as SDT
+ SST @K ) SDT @K - PST @K - PDT @K - ADT @K CFO @G
<If ordering a 93” or higher unit, consider ordering a tall end panel to flush out the exposed side
Tall
Cabi
nets
F6 Tall Appliance Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . OCU2784B
Oven Cabinet Support Platform
A OCSP27 OCSP30 OCSP33
• For installing second appliance in Oven Cabinet Universal (OC_U)
• Same shelf platform and hardware as included with Oven Cabinet Universal (OCU)
• 1” thick engineered wood for SST, SDT, PST, and PDT
• All Plywood Construction (ADT) platform is 1” thick plywood with natural woodgrain laminate on both sides
• SDT, PST and PDT orderable; shipped as SST• Includes four heavy -duty metal mounting brackets and
eight screws which install into pre -drilled holes in cabinet end panels
• One per carton
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K CFO @G
Refrigerator End Panel
A REP3296 • Use next to refrigerator to conceal side,
also supports 24” deep wall cabinet over refrigerator
• 3/4” thick engineered wood core (SST) with vertical grain veneer on both sides and edge banded on one long edge for Cherry, Hickory, Maple and Oak
• 3/4” thick engineered wood core (SST) with white laminate on both sides and matching edge banding on one long edge for White
• 3/4” thick plywood core (ADT) with vertical grain veneer on both sides and edge banded on one long edge for Cherry, Hickory, Maple and Oak
• Chiffon and Cotton are painted Maple• SDT, PST and PDT orderable; shipped as SST• One per carton
SST @K SDT @K PST @K PDT @K ADT @K CFO @G
32˝
96˝
Grain Direction
One long edge
finished
¾˝
Tall Cabinets
F7Tall Accessories
Tall AccessoriesConstruction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
CH Cherry - - - - - - - - - - - - - - - - - - - - -P HK Hickory - - - - - - - - - - - - - - - - - - - -P MP Maple - - - - - - - - - - - - - - - - - - - - -P RO Red Oak - - - - - - - - - - - - - - - - - - -P TH Thermofoil - - - - - - - - - - - - - - - - -P
A MTEP2496
Tall Filler
A TF3-84 TF3-90 TF3-93 TF3-96
• 3/4” thick solid wood• Available in all finishes; Maple Accent
Glaze shipped standard finish• Chiffon, Cotton and White are painted
Maple • Toespace (toekick backer assembly)
included, shipped unattached• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
84˝90˝93˝96˝
3˝
¾˝
Gray color coding indicates new product, size or code.
Tall Fluted Filler
A TFF3-84 TFF3-90 TFF3-93 TFF3-96
• Solid wood• Four flutes• Backside of filler not finished• Available in all finishes; Maple Accent
Glaze shipped standard finish• Chiffon, Cotton and White are painted
Maple • One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
6˝
1 ½˝
3˝
¾˝
84˝90˝93˝96˝
3˝
¾˝
/˝
Gray color coding indicates new product, size or code.
Filler Overlay
A OL3-84 OL3-90 OL3-93 OL3-96
• Attaches to 3” or 6” wide filler, not included. Order separately
• 3/4” thick with matching profile on all four edges, sized to match door height of adjacent cabinet
• Spacers installed on backside to align with doors of adjacent cabinet
• Mounting hardware included• Available for all Full Overlay door styles,
except Fusion• Specify door style, specie and finish• One per carton
+ CH @P HK @P + MP @P + RO @P + TH @P
3˝
OverlayFillerNot
Included78 ¾˝84 ¾˝87 ¾90 ¾˝
2 /˝
79 ½˝ (84˝)85 ½˝ (90˝)88 ½˝ (93˝)91 ½˝ (96˝) Gray color coding indicates new product, size or code.
Tall
Cabi
nets
F8 Tall Accessories
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . TFF3-84
Tall End Panel Filler
A TEPF1-84 TEPF1-96
• Use next to refrigerator to conceal side, also supports 24” deep wall cabinet over refrigerator
• 1/2” thick plywood panel with matching veneer finish, except white
• 1/2” thick laminate on both sides, panel for white
• Available in all finishes, except Maple Accent Glaze shipped standard finish
• Chiffon and Cotton are painted Maple• Toespace notch must be field cut• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
24˝
84˝96˝
1 ½˝Wide Filler
Field cutToespace
Exterior Interior
½˝
1 ½˝
¾˝
/˝ /˝
Tall End Panel
A TEP84 TEP84-2 TEP96 TEP96-2 TEP108 TEP108-2
• Optional panel used to trim or flush out laminate exposed end of tall cabinet
• Can also be used as decorative panel on doors of side by side refrigerator where trim kits from the refrigerator manufacturer are available
• For right or left hand use• 3/16” thick veneered plywood panel,
except White, finished on one side and grain runs lengthwise
• 3/16” thick laminate frontside and unfinished backside for White
• Chiffon and Cotton are painted Maple• Toespace notch must be field cut• Trimmed to fit installation• Offered individually or two per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
FieldcutToespace
Grain Direction
84˝96˝
108˝
23 ¼˝
53 ½˝ 84˝
13˝, 21˝
53 ½˝ 84˝
13˝, 21˝ Center Drilled Shown
Tall Cabinets
F9Tall Accessories
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . TFF3-84
Furniture End Panels
A Not Center Drilled FEP1353 FEP1384 FEP2153 FEP2184 Center Drilled FEP1353CE FEP1384CE FEP2153CE FEP2184CE
• 3/4” thick engineered wood• Front and back edges finished• Furniture End Panels are bored one side
for adjustable shelves, tops, bottoms, hanger rails and valances, while Center Furniture End Panels are bored both sides
• 53” Furniture Panels are for mounting on desk cabinets or panels and can be trimmed to 48” for mounting on kitchen base cabinets
• 84” Furniture Panels are for floor mounted installation• Available in all finishes, except Maple Accent Glaze
shipped standard finish• Cherry, Hickory, Maple, and Oak have wood veneer
surfaces, except Chiffon, Cotton and White• Chiffon, Cotton and White have matching laminate
surfaces• Not available in All Plywood Construction (ADT) • One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
Matching Tall End Panel
A 84” High MTEP1284 MTEP2184 MTEP2484 90” High MTEP1290 MTEP2190 MTEP2490 93” High MTEP1293 MTEP2193 MTEP2493 96” High MTEP1296 MTEP2196 MTEP2496
• Provides a finished furniture look to Oven Cabinet Single (OCS), Oven Cabinet Universal (OCU), Pantry Cabinet (PC), Utility Cabinet (UC) and Vanity Linen Tall (VLC) cabinet ends
• For right or left hand use• 3/16” thick plywood panel with one
short and one tall decorative door, except Arbor Falls II and Whitebay II
• 3/16” thick white laminate panel with one short and one tall decorative door for Arbor Falls II and Whitebay II
• If arch configuration is required for upper door(s), please specify
• Full Overlay door styles (both square and arch style doors) overlap cabinet frame to match reveals
• Toespace notch must be field cut• Doors and panel are shipped separately; field assembly
required• Available in all finishes; Maple Accent Glaze is available in
square door styles only
+ CH @P + HK @P + MP @P + RO @P + TH @P
FieldcutToespace
11 ¼˝, 20 ¼˝, 23 ¼˝
Grain Direction
84˝90˝93˝96˝
Panel
Panel
Panel Size
Item Width Height
MTEP1284MTEP1290MTEP1293MTEP1296MTEP2184MTEP2190MTEP2193MTEP2196MTEP2484MTEP2490MTEP2493MTEP2496
84"90"93˝96"84"90"93"96"84"90"93"96"
11 ¼˝11 ¼˝11 ¼˝11 ¼˝20 ¼˝20 ¼˝20 ¼˝20 ¼˝23 ¼˝23 ¼˝23 ¼˝23 ¼˝
Gray color coding indicates new product, size or code.
Tall
Cabi
nets
F10 Tall Accessories
Notes
Vanity Cabinets
G1Vanity Cabinets
Vanity Cabinets
Construction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
SST Construction - - - - - - - - - - - - - - - -K SDT Construction - - - - - - - - - - - - - - - -K PST Construction - - - - - - - - - - - - - - - -K PDT Construction - - - - - - - - - - - - - - - -K ADT Construction - - - - - - - - - - - - - - - -K 09 Depth Modification - - - - - - - - - - -B 12 Depth Modification - - - - - - - - - - -B 15 Depth Modification - - - - - - - - - - -B 18 Depth Modification - - - - - - - - - - -B CFO Cabinet Front Only - - - - - - - - - - -G
A C VB12 L
Vanity Base Single Door
A C Specify R or L
21” Deep 31 1/2” High
VB12 R or L VB15 R or L VB18 R or L VB21 R or L VB24 R or L Specify R or L
21” Deep 34 1/2” High
VB1235 R or L VB1535 R or L VB1835 R or L VB2135 R or L VB2435 R or L
• Standard height top drawer• Back is pre -drilled for optional bottom
and mid -height accessory Roll -out Trays (ROT) and Vanity Tray Kits (VTK)
- When depth is reduced to 12” or 15”, drawers become a false drawer front
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B - 12 @B - 15 @B ) 18 @B ) CFO @G
31 ½˝34 ½˝
21˝
Vanity Base Double Door
A 21” Deep
31 1/2” High VB24B 34 1/2” High VB2435B
• Standard height top drawer• Cabinets with a “B” suffix to have BUTT
doors without frame center stile• Back is pre -drilled for optional bottom
and mid -height accessory Roll -out Trays (ROT) and Vanity Tray Kits (VTK)
- When depth is reduced to 12” or 15”, drawers become a false drawer front
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B - 12 @B - 15 @B ) 18 @B ) CFO @G
31 ½˝34 ½˝
21˝
Van
ity
Cabi
nets
G2 Vanity Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . VB12L
Vanity Base Single Door Full-Height
A C Specify R or L
31 1/2” High 16” Deep
% VB1816FH R or L 18” Deep% VB1818FH R or L% VB2118FH R or L 21” Deep( VB18FH R or L( VB21FH R or L VB24SFH R or L 34 1/2” High
18” Deep% VB243518SFH R or L 21” Deep VB1835FH R or L VB2135FH R or L( VB2435SFH R or L
• Back is pre -drilled for optional bottom and mid -height accessory Roll -out Trays (ROT) and Vanity Tray Kits (VTK)
• Accessory roll -out tray not available for VB1816FH or VB2118FH
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B - 12 @B - 15 @B - 18 @B ) CFO @G
31 ½˝
16˝VB1816FH
31 ½˝34 ½˝
18˝, 21˝
% Depth modification options are not available( Reduce to 18” depth not available
Vanity Base Double Door Full-Height
A 31 1/2” High - 18” Deep% VB2418FH% VB2418BFH% VB2718BFH% VB3018FH% VB3018BFH% VB3318FH% VB3318BFH% VB3618FH% VB3618BFH% VB4218FH 34 1/2” High - 18” Deep% VB243518BFH% VB273518BFH% VB303518FH% VB303518BFH% VB333518BFH% VB363518FH% VB363518BFH
A31 1/2” High - 21” Deep( VB24FH( VB24BFH( VB27BFH( VB30FH( VB30BFH( VB33FH( VB33BFH( VB36FH( VB36BFH VB39FH( VB42FH 34 1/2” High - 21” Deep( VB2435BFH( VB2735BFH( VB3035FH( VB3035BFH( VB3335FH( VB3335BFH( VB3635FH( VB3635BFH VB3935FH VB4235FH
• Cabinets with a “B” suffix have BUTT doors without a center frame stile
• Back is pre -drilled for optional bottom and mid -height accessory Roll -out Trays (ROT) and Vanity Tray Kits (VTK)
• Accessory roll out trays not available for VB3318FH, VB333518FH, VB39FH, VB3935FH and VB4218FH
• Two Full -height doors
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B - 12 @B - 15 @B - 18 @B ) CFO @G
31 ½˝34 ½˝
18˝, 21˝
% Depth modification options are not available( Reduce to 18” depth not available
Gray color coding indicates new product, size or code.
Vanity Base Three Door Full-Height
A 18” Deep
31 1/2” High% VB4818FH% VB5418FH 21” Deep
31 1/2” Deep( VB48FH( VB54FH 21” Deep
34 1/2” High VB4835FH VB5435FH
• Middle door on 48” cabinets is 3” wider than outer doors
• Center door is hinged right• Full -height doors• 54” cabinets have three equal size doors• Back is pre -drilled for optional bottom
and mid -height accessory Roll -out Trays (ROT) that fit behind outer doors
• Back panel of VB5435FH is pre -drilled for accessory roll -out trays that fit behind the center door
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B - 12 @B - 15 @B - 18 @B ) CFO @G
31 ½˝34 ½˝
18˝, 21˝ 15˝18˝
18˝18˝
15˝18˝
% Depth modification options are not available( Reduce to 18” depth not available
Vanity Cabinets
G3Vanity Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . VB12L
Vanity Base Four Door Full-Height
A 18” Deep
31 1/2” High% VB6018FH 21” Deep
31 1/2” High( VB60FH 34 1/2” High VB6035FH
• Actual cabinet width is 59 1/2”, frame stiles are extended and may be trimmed a maximum of 1/2” each to a cabinet width of 58 1/2”
• Traditional overlay inner doors are 12 5/8” wide and outer doors are 13 1/4” wide. Full overlay inner doors are inner doors are 14” wide and outer doors are 14 5/8”
• Door left of center hinged left, door right of center hinged right
• Full -height doors• 3 3/16” wide full -width support crossrail
across top front of cabinet• Back is pre -drilled for optional bottom
and mid -height accessory Roll -out Trays (ROT) that fit behind outer doors
• Roll -out Trays (ROT) are not available for center doors
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B - 12 @B - 15 @B - 18 @B ) CFO @G
31 ½˝34 ½˝
18˝, 21˝ 12 /˝ 14˝
12 /˝ 14˝13 ¼˝
14 /˝
13 ¼˝14 /˝
% Depth modification options are not available( Reduce to 18” depth not available
Vanity Sink Base Butt Door
A 21” Deep
31 1/2” High VSB24B VSB27B VSB30B VSB33B VSB36B VSB39 VSB42
A 21” Deep 34 1/2” High VSB2435B VSB2735B VSB3035B VSB3335B VSB3635B VSB3935 VSB4235
• No shelf• Cabinets with a “B” suffix have BUTT
doors without a center frame stile• VSB42, VSB3935 and VSB4235 have a
double door with a frame center stile• All cabinets have one full -width drawer
front except VSB42 and VSB4235 which have two drawer fronts
• Back is pre -drilled for optional bottom and mid -height accessory Roll -out Trays (ROT) and Vanity Tray Kits (VTK)
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B ) 12 @B ) 15 @B ) 18 @B ) CFO @G
31 ½˝34 ½˝
21˝
Vanity Sink Base Double Bowl
A 21” Deep
31 1/2” High VSB54-3D VSB60-3D 21” Deep
34 1/2” High VSB5435-4D VSB6035-4D
• VSB 31 1/2” high cabinets have 3 drawers in the center section, 1 top drawer of standard height, 2 deep drawers below
• VSB 34 1/2” high cabinets have four drawers in the center section, three top drawers of standard height and one deep drawer below
• One full -width false drawer front above doors
• VSB60 -3D and VSB6035 -4D traditional overlay doors are 18 5/8” wide. Full overlay doors are 20” wide
• VSB54 -3D and VSB5435 -4D traditional overlay doors are 19 1/4” wide. Full overlay doors are 20 5/8” wide.
• 3 3/16” wide full -width support crossrail across top front of cabinet
• Opening on each end for sink installation is 18 7/8” for 54” cabinet and 21 1/4” for 60” cabinet
• Optional accessory Roll -out Trays (ROT) available for 54” wide cabinets only. Back panel not pre -drilled
- When depth is reduced to 12” or 15”, drawers become a false drawer front
• LaBelle standard height drawer front has a flat recessed center panel, while deep drawer fronts have a raised center panel
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B - 12 @B - 15 @B ) 18 @B ) CFO @G
31 ½˝
21˝ 21˝20 ¾˝
12˝18˝
21˝20 ¾˝
Van
ity
Cabi
nets
G4 Vanity Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . VB12L
Vanity Sink Base Two Drawer Double Door
A 21” Deep
31 1/2” High VSB36-2D 21” Deep
34 1/2” High VSB3635-2D
• Two standard height top drawers. Outer right and left drawer fronts are offset. Verify placement of decorative hardware before final installation
• False front only between drawers• Space between drawers for sink
installation is 18”• Back is pre-drilled for optional bottom
and mid-height accessory Roll-out Trays (ROT) and Vanity Tray Kits (VTK)
- When depth is reduced to 12” or 15”, drawers become a false drawer front
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B - 12 @B - 15 @B ) 18 @B ) CFO @G
21˝
31 ½˝34 ½˝
Vanity Sink Base Two Drawer Three Door
A 21” Deep
31 1/2” High VSB42-2D VSB48-2D VSB54-2D 34 1/2” High VSB4235-2D VSB4835-2D VSB5435-2D
• Two standard height top drawers• Drawer front only between top drawers• Center door is hinged right• Middle door on 42” cabinets is 6” wider
than outer doors• Middle door on 48” cabinets is 3” wider
than outer doors• Doors are equal size on 54” wide
cabinets• Back is pre-drilled for optional bottom
and mid-height accessory Roll-out Trays (ROT) that fit behind outer doors
• Center back panel is pre-drilled on VSB5435-2D only
• Space between drawers for sink installation is 21”
• 54” wide cabinets have a 3 3/16” wide full-width support cross rail across top front of cabinet
- When depth is reduced to 12” or 15”, drawers become a false drawer front
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B - 12 @B - 15 @B ) 18 @B ) CFO @G
21˝
31 ½˝34 ½˝
12˝15˝18˝
12˝15˝18˝
18˝18˝18˝
Vanity Sink Base Two Drawer Four Door
A 21” Deep
31 1/2” High VSB60-2D 34 1/2” High VSB6035-2D
• Two standard height top drawers• Drawer front only between top drawers• Door left of center hinged left, door
right of center hinged right• Actual cabinet width is 59 1/2”, frame
stiles are extended and may be trimmed a maximum of 1/2” each to a cabinet width of 58 1/2”
• Space between drawers for sink installation is 31 3/4”
• Traditional overlay inner doors are 12 5/8” wide and outer doors are 13 1/4” wide. Full overlay inner doors are inner doors are 14” wide and outer doors are 14 5/8”
• 3 3/16” wide full-width support crossrail across top front of cabinet
• Back is pre-drilled for optional bottom and mid-height accessory Roll-out Trays (ROT) that fit behind outer doors
• Roll-out Trays (ROT) are not available for center doors- When depth is reduced to 12” or 15”, drawers become a
false drawer front
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B - 12 @B - 15 @B ) 18 @B ) CFO @G
21˝
31 ½˝34 ½˝
2.485” 2.485”
Vanity Cabinets
G5Vanity Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . VB12L
Vanity Combination Drawer Two Drawer
A Specify DR or DL
18” Deep 31 1/2” High
% VCD2418 DR or DL% VCD3018 DR or DL% VCD3618 DR or DL 21” Deep VCD24 DR or DL VCD30 DR or DL VCD36 DR or DL
• One door and one full -width drawer front above door and drawers
• Specify DL (Drawer Left) or DR (Drawer Right) position for drawers
• LaBelle standard height drawer front has a flat recessed center panel, while deep drawer fronts have a raised center panel
• Back is pre -drilled for optional bottom and mid -height accessory Roll -out Trays (ROT) and Vanity Tray Kits (VTK)
- When depth is reduced to 12” or 15”, drawers become a false drawer front
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B - 12 @B - 15 @B 18 @B ) CFO @G
18˝, 21˝
31 ½˝
% Depth modification options are not available
Vanity Combination Drawer Three Drawer
A Specify DR or DL
21” Deep 34 1/2” High
VCD2435 DR or DL VCD3035 DR or DL VCD3635 DR or DL
• One door and one full -width drawer front above door and drawers
• Specify DL (Drawer Left) or DR (Drawer Right) position for drawers
• LaBelle standard height drawer front has a flat recessed center panel, while deep drawer fronts have a raised center panel
• Back is pre -drilled for optional bottom and mid -height accessory Roll -out Trays (ROT) and Vanity Tray Kits (VTK)
- When depth is reduced to 12” or 15”, drawers become a false drawer front
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B - 12 @B - 15 @B ) 18 @B ) CFO @G
21˝
34 ½˝
Vanity Combination Drawer Six Drawer Single Door
A 18” Deep
31 1/2” High% VCD4218% VCD4818 21” Deep VCD42 VCD48
• Two standard height top drawers and four deep lower drawers
• Center door is hinged right• Drawer front only between top drawers• LaBelle standard height drawer front
has a flat recessed center panel, while deep drawer fronts have a raised center panel
• Space between drawers for sink installation is 21”
- When depth is reduced to 12” or 15”, drawers become a false drawer front
• Back is not pre -drilled for optional bottom and mid -height accessory Roll -out Trays (ROT)
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B - 12 @B - 15 @B 18 @B ) CFO @G
18˝, 21˝
31 ½˝
12˝15˝
12˝15˝18˝
18˝ % Depth modification options are not available
Van
ity
Cabi
nets
G6 Vanity Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . VB12L
Vanity Combination Drawer Eight Drawer Single Door
A 21” Deep
34 1/2” High VCD4235 VCD4835
• Six standard height and two deep drawers
• Center door is hinged right• Drawer front only between top drawers• LaBelle standard height drawer front has
a flat recessed center panel, while deep drawer fronts have a raised center panel
• Space between drawers for sink installation is 21”
• Back is pre -drilled for optional bottom and mid -height accessory Roll -out Trays (ROT) and Vanity Tray Kits (VTK)
- When depth is reduced to 12” or 15”, drawers become a false drawer front
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B - 12 @B - 15 @B ) 18 @B ) CFO @G
21˝
34 ½˝
12˝15˝
12˝15˝18˝
18˝
Vanity Combination Drawer Six Drawer Double Door
A 18” Deep
31 1/2” High% VCD6018 21” Deep VCD60
• Two standard height top drawers and four deep lower drawers
• Drawer front only between top drawers• Door left of center hinged left, door
right of center hinged right• LaBelle standard height drawer front
has a flat recessed center panel, while deep drawer fronts have a raised center panel
• Actual cabinet width is 59 1/2”, frame stiles are extended and may be trimmed a maximum of 1/2” each to a cabinet width of 58 1/2”
• 3 3/16” wide full -width support crossrail across top front of cabinet
• Space between drawers for sink installation is 31 3/4”
• Accessory Roll -out Trays not available- When depth is reduced to 12” or 15”, drawers become a
false drawer front
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B - 12 @B - 15 @B 18 @B ) CFO @G
18˝, 21˝
31 ½˝
% Depth modification options are not available
Vanity Combination Drawer Eight Drawer Double Door
A 21” Deep
34 1’2” high VCD6035
• Six standard height top drawers and 2 deep lower drawers
• Drawer front only between top drawers• LaBelle standard height drawer front has
a flat recessed center panel, while deep drawer fronts have a raised center panel
• Door left of center hinged left, door right of center hinged right
• Actual cabinet width is 59 1/2”, frame stiles are extended and may be trimmed a maximum of 1/2” each to a cabinet width of 58 1/2”
• 3 3/16” wide full -width support crossrail across top front of cabinet
• Space between drawers for sink installation is 31 3/4”
• Accessory Roll -out Trays not available- When depth is reduced to 12” or 15”,
drawers become a false drawer front
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B - 12 @B - 15 @B ) 18 @B ) CFO @G
21˝
34 ½˝
Vanity Cabinets
G7Vanity Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . VB12L
Vanity Drawer Three Drawer
A 18” Deep
31 1/2” High VD1218-3D VD1518-3D VD1818-3D VD2118-3D VD2418-3D
A 21” Deep
31 1/2” High VD12-3D VD15-3D VD18-3D VD21-3D VD24-3D 34 1/2” High- VD1235-3D- VD1535-3D- VD1835-3D- VD2135-3D- VD2435-3D
• One standard height top drawer and two deep drawers below
• LaBelle standard height drawer front has a flat recessed center panel, while deep drawer fronts have a raised center panel
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B 12 @B 15 @B - 18 @B ) CFO @G
18˝, 21˝
31 ½˝34 ½˝
- Available with reduce to 18” depth
Vanity Drawer Four Drawer
A 18” Deep
34 1/2” High VD123518-4D VD153518-4D VD183518-4D 21” Deep
34 1/2” High VD1235-4D VD1535-4D VD1835-4D- VD2135-4D- VD2435-4D
• Three standard height drawers and one deep drawer below
• LaBelle standard height drawer front has a flat recessed center panel, while deep drawer fronts have a raised center panel
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B 12 @B 15 @B - 18 @B ) CFO @G
18˝, 21˝
34 ½˝
- Available with reduce to 18” depth
Vanity Linen Cabinet
A C Specify R or L VLC1848 R or L
• Three full -depth adjustable shelves• Not available in arch door styles• Door is two piece construction except
for Arbor Falls II, Fusion, and Whitebay II. Arbor Falls II and Whitebay II have a single raised center panel
• Cabinet designed to stack directly on VD18 -3D cabinets or sit directly on countertop
• Accessory Roll -out Trays not available• Not intended as a stand alone, single
wall mount cabinet. Must be installed on a VB, VD or VHB cabinet or other support
? Caution: Additional support is required. See installation sheet provided with cabinet or the
Merillat Framed Cabinet Installation Guide
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K ) 09 @B ) 12 @B ) 15 @B ) 18 @B ) CFO @G
48˝
21˝
Van
ity
Cabi
nets
G8 Vanity Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . VB12L
Vanity Linen Cabinet Tall
A C Specify R or L
84” Tall VLC1584 R or L VLC1884 R or L VLC2484 R or L VLC2484B 90” Tall VLC1590 R or L VLC1890 R or L VLC2490 R or L VLC2490B 96” Tall VLC1596 R or L VLC1896 R or L VLC2496 R or L VLC2496B
• Fixed shelf between top and bottom section with adjustable shelves in top section: 84” high -no shelves; 90” and 93” high -1 shelf; 96” high -2 shelves
• Not available in arch door styles• End panels of bottom section are pre -
drilled for optional shelves and Roll -out Trays (ROT). Roll -out Trays (ROT) apply to 21” VLC’s only
• Cabinets with a “B” suffix have BUTT doors without a center frame stile
• Bottom, tall doors are two -piece panel construction, except Arbor Falls II, Fusion, Whitebay II. Arbor Falls II and Whitebay II have a single raised panel profile
• Lariat tall doors have rope molding along side stiles and top and bottom rail, no molding is applied to center rail
• Interior height of tall section on 84” and 96” tall cabinets is 60 15/16”; 90” tall is 61 7/16”
• 96” high cabinets include toe kick platform shipped unattached for easier handling and installation
• Toe Kick cover required on exposed sides of toe kick platform
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B 12 @B ) 15 @B ) 18 @B ) CFO @G
84˝90˝96˝
21˝ 15˝, 18˝, 24˝
Gray color coding indicates new product, size or code.
Vanity Wall Boutique - 7” Deep
A VWB2430 VWB2430B • One adjustable shelf
• Cabinets with a “B” suffix have BUTT doors without a center frame stile
• Exposed full -depth fixed shelf in lower section
• Not available in arch door styles• No towel bar• Matching color laminate interior and
shelves• Back panel has vertical grain except
Chiffon, Cotton and White• 5” high frame opening in lower section• Cabinet back extends through opening
in lower section
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B 12 @B 15 @B 18 @B CFO @G
7˝
30˝
24˝
Vanity Cabinets
G9Vanity Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . VB12L
Vanity Wall Boutique - 8” Deep
A VWB2648 • Two adjustable shelves
• Not available in arch door styles• Cabinet includes, 3/4” matching side
solid wood side panels, exposed fixed shelf and matching solid wood towel bar
• 6 7/8” high opening between fixed shelf and cabinet
• Maple Accent Glaze finish is applied to doors only, side panels, exposed shelf and towel bar are not glazed
- SDT, PST and PDT orderable; shipped as SST
+ SST @K - SDT @K - PST @K - PDT @K ) ADT @K 09 @B 12 @B 15 @B 18 @B CFO @G
48˝
8˝
25˝Laminate and painted door styles
48˝
8˝
25˝
Stained door styles
Vanity Wall - 4 3/4” Deep
A C Specify R or L VW1530 R or L
• Three adjustable shelves• Not available in arch door styles• Surface mount
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K 09 @B 12 @B 15 @B 18 @B CFO @G
30˝
15˝4 ¾˝
Van
ity
Cabi
nets
G10 Vanity Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . VB12L
Medicine Cabinet
A MC1627
• For surface mount or recess installation• Cutout required for recessed installation;
14 1/2” wide, 25 3/4” high, 3 1/2” deep• Available in square door shape only• Door is 3/16” thick plate glass mirror
with rounded edges with pivot hinges, magnetic touch latch and vinyl safety backer
• Three adjustable 5/8” thick no -tilt shelves with clear shelf supports
• Hinged right• Cabinet can be inverted, magnetic latch
must be relocated• Maple laminate interior• Solid wood frame has profile on all four
outside edges complementing; Seneca Ridge, Spring Valley, Sutton Cliffs and Whitebay II door styles
• Available in all finishes, except Maple Accent Glaze shipped standard finish
• Chiffon, Cotton and White are painted Maple • Available in Standard Construction (SST) and All Plywood
Construction (ADT)- SDT, PST and PDT orderable; shipped as SST• Mounting hardware included• Mirror door shipped unattached for easier handling and
installation
+ SST @K - SDT @K - PST @K - PDT @K ) ADT @K 09 @B 12 @B 15 @B 18 @B CFO @G
27˝
4 ¼˝
16˝
Tri-View Medicine Cabinet
A TVMC2430 TVMC3030 TVMC3630
• For surface mount or recess installation• Three adjustable 5/8” thick no -tilt
shelves with clear shelf supports• Doors are 3/16” thick plate glass mirror
with rounded edges with pivot hinges, magnetic touch latch and vinyl safety backer
• Left and center doors hinged right, right door hinged left to create a three -way reflection
• Vertical divider between center and left hand door in 30” and 36” cabinet
• Solid wood frame has profile on all four outside edges complementing; Seneca Ridge, Spring Valley, Sutton Cliffs and Whitebay II door styles
• Available in all finishes, except Maple Accent Glaze shipped standard finish
• Chiffon, Cotton and White are painted Maple • Available in Standard Construction (SST) and All
Plywood Construction (ADT)• SDT, PST and PDT orderable; shipped as SST• Mirror door shipped unattached for easier handling and
installation• Mounting hardware included
+ SST @K - SDT @K - PST @K - PDT @K ) ADT @K 09 @B 12 @B 15 @B 18 @B CFO @G
30˝
4 ¼˝
Vanity Cabinets
G11Vanity Accessories
Vanity AccessoriesConstruction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
CH Cherry - - - - - - - - - - - - - - - - - - - - -P HK Hickory - - - - - - - - - - - - - - - - - - - -P MP Maple - - - - - - - - - - - - - - - - - - - - -P RO Red Oak - - - - - - - - - - - - - - - - - - -P TH Thermofoil - - - - - - - - - - - - - - - - -P
A VFF3
Vanity Hamper Roll-Out
A VHRO18 • Fits 31 1/2” high vanities with full height
doors 18” and wider or 34 1/2” high vanity cabinets 18” and wider with or without a top drawer
• White epoxy coated wire frame rolls on full -extension slides, designed for easy removal of basket
• 19 1/2” high x 15” wide x 19” deep• Mounts to cabinet floor• Load rating of 30 lbs• 60 -qt. white plastic laundry basket included• Installation instructions and mounting hardware included• Offered as individual kit
CH @P HK @P MP @P RO @P TH @P
19 ½˝
19˝
15˝
Vanity Filler
A VF3 • 3/4” thick solid wood
• Backside of filler not finished• Available in all finishes; Maple Accent
Glaze shipped standard finish• Chiffon, Cotton and White are painted
Maple • Toespace (toekick backer assembly)
included, shipped unattached• Overlays (OL) available for all full overlay
door styles except Fusion. Order separately• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
3˝
31 ½˝
¾˝
Tall Filler
A TF3-84 TF3-90 TF3-93 TF3-96
• 3/4” thick solid wood• Available in all finishes; Maple Accent
Glaze shipped standard finish• Chiffon, Cotton and White are painted
Maple • Toespace (toekick backer assembly)
included, shipped unattached• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
84˝90˝93˝96˝
3˝
¾˝
Van
ity
Cabi
nets
G12 Vanity Accessories
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . VFF3
Vanity Fluted Filler
A VFF3 • Use between cabinets or to create
a column effect. Can be combined with other moldings and panels for decorative effects
• Solid wood• Backside of filler not finished• Four flutes• Available in all finishes; Maple Accent
Glaze shipped standard finish• Chiffon, Cotton and White are painted Maple • One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P6˝
1 ½˝
3˝
¾˝
31 ½˝
3˝
¾˝/˝
Tall Fluted Filler
A TFF3-84 TFF3-90 TFF3-93 TFF3-96
• Solid wood• Four flutes• Backside of filler not finished• Available in all finishes; Maple Accent
Glaze shipped standard finish• Chiffon, Cotton and White are painted
Maple • One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P6˝
1 ½˝
3˝
¾˝
84˝90˝93˝96˝
3˝
¾˝
/˝
Gray color coding indicates new product, size or code.
Filler Overlay
A OL3-27 OL3-30
• Attaches to 3” or 6” wide filler, not included. Order separately
• 3/4” thick with matching profile on all four edges, sized to match door height of adjacent cabinet
• Spacers installed on backside to align with doors of adjacent cabinet
• Mounting hardware included• Available for all Full Overlay door styles,
except Fusion• Specify door style, specie and finish• One per carton
+ CH @P HK @P + MP @P + RO @P + TH @P
3˝
Overlay FillerNot
Included
2 /˝
26 1/˝29 1/˝
27˝30˝
Filler Angle
A FA3-30 FA3-42 FA3-60
• Fills 3” space between cabinets that are offset 3”
• 3/4” thick solid wood• For right or left hand use• Backside of filler not finished• Available in all finishes; Maple Accent
Glaze shipped standard finish• Chiffon, Cotton and White are painted
maple and shipped standard finish• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
3˝¾˝
30˝42˝60˝
3˝
3˝
Vanity Cabinets
G13Vanity Accessories
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . VFF3
Fluted Filler Angle
A FFA3-30 FFA3-36 FFA3-39 FFA3-42
• Fills 3” space between cabinets that are offset 3”
• Five flutes• 3/4” thick solid wood• For right or left hand use• Backside of filler not finished• Chiffon, Cotton and White are painted
Maple • Available in all finishes; Maple Accent
Glaze shipped standard finish• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
¾˝
30˝36˝39˝42˝
1 ½˝
1 ½˝
3˝
3˝
Gray color coding indicates new product, size or code.
Matching Vanity End Panel
A MVEP2131 MVEP2135 • Provides a finished furniture look to
vanity cabinet ends• Includes end panel with decorative door• For right or left hand use• 3/16” thick veneered plywood panel,
except Arbor Falls II and Whitebay II• 3/16” thick white laminate panel for
Arbor Falls II and Whitebay II• Available in all door styles and finishes,
excluding arch shape• Full overlay door styles are 20 5/8” wide and 26 1/4” tall
for the 31 1/2” panel and 20 5/8” wide and 29 1/4” tall for the 34 1/2” panel, and shipped unattached to the end panel, which when installed, the door overlaps cabinet frame to match reveals
• Traditional overlay door styles are 19 1/4” wide and 25” tall for the 31 1/2” panel and 19 1/4” wide and 28” tall for the 34 1/2” panel and shipped attached to the end panel
• Chiffon and Cotton are painted Maple• Toespace notch must be field cut• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
Field cutToespace
31 ½˝34 ½˝
20 ¼˝21˝
/˝
Item
MVEP2131
MVEP2135
20 ¼˝
20 ¼˝
Width
31 ½˝
34 ½˝
Height
26 ¼˝
29 ¼˝
Height
20 /˝
20 /˝
Width
25˝
28˝
Height
19 ¼˝
19 ¼˝
Width
Panel Size
Full Overlay
PartialOverlay
Van
ity
Cabi
nets
G14 Vanity Accessories
Notes
Office Cabinets
H1Office Cabinets
Office CabinetsConstruction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
SST Construction - - - - - - - - - - - - - - - -K SDT Construction - - - - - - - - - - - - - - - -K PST Construction - - - - - - - - - - - - - - - -K PDT Construction - - - - - - - - - - - - - - - -K ADT Construction - - - - - - - - - - - - - - - -K 12 Depth Modification - - - - - - - - - - -B 15 Depth Modification - - - - - - - - - - -B 18 Depth Modification - - - - - - - - - - -B 21 Depth Modification - - - - - - - - - - -B CFO Cabinet Front Only - - - - - - - - - - -G
A C DDO15 R
Desk Door
A C Specify R or L DDO15 R or L DDO18 R or L DDO21 R or L DDO24 R or L
• No shelf• Standard height top drawer- When depth is reduced to 12” or 15”,
drawers become a false drawer front
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K - 12 @B - 15 @B ) 18 @B 21 @B ) CFO @G
21˝
29˝
Desk Drawer
A DDR12 DDR15 DDR18 DDR21 DDR24
• Two standard height top drawers on top• One deep bottom drawer• 3/4 extension on drawer(s)• LaBelle standard height drawer front has
a flat recessed center panel, while deep drawer fronts have a raised center panel
• Designed to be used in conjunction with Desk Knee Drawer (DKD) units
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 12 @B 15 @B ) 18 @B 21 @B ) CFO @G
21˝
29˝
Offi
ce C
abin
ets
H2 Office Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . DDO15
Desk File Drawer
A DFD15 DFD18 DFD21 DFD24
• Standard height top drawer• 3/4 extension on top drawer• Bottom file drawer has full extension side -
mount slides and hanging folder hardware to accommodate letter or legal size folders
• Drawer front on bottom drawer is styled as a door
• DFD24 cabinet uses same hanging folder hardware as DFD21 cabinet
• Designed to be used in conjunction with Desk Knee Drawer (DKD) units
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B CFO @G21˝
29˝
Letter or Legal Letter only Letter or Legal Legal only
Letter or Legal Legal onlyLetter or Legal
FD15
FD18
FD21
FD24
Desk Knee Drawer
A 18” deep DKD2418 DKD3018 DKD3618 21” deep DKD24 DKD30 DKD36
• Designed for use between base, desk, vanity, tall cabinets or with desk leg on one end
• Full -width top panel is recessed for easier installation
• Drawer front is profiled on all edges• Traditional overlay door styles; face frame
stiles may be trimmed a maximum 3/4” each allowing the DKD width to be reduced a maximum of 1 1/2”
• Full overlay door styles; face frame stiles are not trimmable
• Drawer fronts are solid slab; except Bayville, Bellingham, LaBelle, Lariat and Ralston
• Bayville, Bellingham, LaBelle, Lariat and Ralston drawer fronts are same construction as standard fronts; except the stiles and rails are narrower (1 1/2” wide) and the LaBelle center panel is flat and recessed like standard height drawer fronts
- PST orderable, shipped as SST- PDT orderable, shipped as SDT• Requires countertop or writing surface
+ SST @K ) SDT @K - PST @K - PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B ) CFO @G
4 ½˝
24˝ 30˝ 36˝
18˝ 21˝
Office Cabinets
H3Office Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . DDO15
Desk Knee Drawer Trimmable
A 18” deep DKDT2418 DKDT3018 DKDT3618 21” deep DKDT24 DKDT30 DKDT36
• Designed for use between base, desk, vanity, tall cabinets or with desk leg on one end
• Full -width top panel is recessed for easier installation• Drawer front is profiled on all edges• Drawer fronts are solid slab; except Bayville,
Bellingham, LaBelle, Lariat and Ralston• 4 1/2” wide face frame stiles permit DKDT to be
trimmed up to 6” in overall width (3” each side)• Face frame includes 11/16” tall bottom rail for added
strength• Bayville, Bellingham, LaBelle, Lariat and Ralston
drawer fronts are same construction as standard fronts; except the stiles and rails are narrower (1 1/2” wide) and the LaBelle center panel is flat and recessed like standard height drawer fronts
- PST orderable, shipped as SST- PDT orderable, shipped as SDT• Requires countertop or writing surface
+ SST @K ) SDT @K - PST @K - PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B ) CFO @G
5 /˝
18˝ 21˝
24˝ 30˝ 36˝
Offi
ce C
abin
ets
H4 Office Cabinet Accessories
Office Cabinet AccessoriesConstruction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
CH Cherry - - - - - - - - - - - - - - - - - - - - -P HK Hickory - - - - - - - - - - - - - - - - - - - -P MP Maple - - - - - - - - - - - - - - - - - - - - -P RO Red Oak - - - - - - - - - - - - - - - - - - -P TH Thermofoil - - - - - - - - - - - - - - - - -P
A DEP2431
Organizer
A O24 O30 O36
• For use beneath wall cabinets or open shelves• Matching wood veneer interior and exterior surfaces• Use a Wall End Panel (WEP) on exposed sides to
cover end panel joints between wall cabinet and organizer
• Includes a matching solid wood strip at each end to align with wall cabinet frame above when stacked
• Available in all finishes; Maple Accent Glaze shipped standard finish
• Chiffon, Cotton and White are painted Maple • One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
12˝6˝
24˝
6˝
6˝
12˝ 30˝
12˝ 36˝
O24
O30
O36
Desk End Panel
A DEP2431
• Used to support end of Desk Knee Drawer (DKD) or Desk Knee Drawer Trimmable (DKDT). Fits behind extended frame stile
• 3/4” thick engineered wood core (SST) with vertical grain veneer on both sides and front edge for Cherry, Hickory, Maple and Oak
• 3/4” thick engineered wood core (SST) with white laminate on both sides and matching edge banding on front edge for White
• 3/4” thick plywood core (ADT) with vertical grain veneer on both sides and front edge for Cherry, Hickory, Maple and Oak
• SDT, PST and PDT orderable; shipped as SST• Available in all finishes; Maple Accent Glaze shipped standard finish• Chiffon and Cotton are painted Maple• Field cut to correct height where applicable• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
5 /˝
31 ½˝
23 ¼˝
¾˝
Matching Desk End Panel
A MDEP
• Provides a finished furniture look to Desk Drawer (DDR) and Desk File Drawer (DFD) cabinet ends
• Includes end panel with decorative door• For right or left hand use• 3/16” thick veneered plywood panel, except Arbor
Falls II and Whitebay II• 3/16” thick white laminate panel for Arbor Falls II and
Whitebay II• Available in all door styles and finishes, excluding arch
shape• Traditional overlay door styles; door measures 19 1/4” wide and 22 1/2”
tall shipped attached to panel• Full overlay door styles; door measures 20 5/8” wide and 23 3/4” tall
shipped unattached to panel. When installed, door overlaps cabinet frame edge to provide matching reveals
• Chiffon and Cotton are painted Maple• Toespace notch must be field cut• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
Field cutToespace
29˝
20 ¼˝
/˝
Universal A
ccess Cabinets
I1Universal Access Cabinets
Universal Access Cabinets
Masco Cabinetry LLC manufactures cabinets that are readily used in floor plans that meet current ADA Accessibility Guidelines for Buildings and Facilities (ADAAG) guidelinadaag.htmqes. The primary responsibility to make a space comply with these guidelines is on the architect or space planner.
Merillat products can be used to help satisfy the storage needs and accessibility requirements of disabled persons but depends on the knowledge, skill and creativity of the design professional and proper installation of these products. ADA Accessibility Guidelines for buildings and Facilities can be visited online at www.access-board.gov/adaag/html/
SST Construction- - - - - - - - - - - - - - - -K SDT Construction- - - - - - - - - - - - - - - -K PST Construction- - - - - - - - - - - - - - - -K PDT Construction- - - - - - - - - - - - - - - -K ADT Construction- - - - - - - - - - - - - - - -K 12 Depth Modification- - - - - - - - - - -B 15 Depth Modification- - - - - - - - - - -B 18 Depth Modification- - - - - - - - - - -B 21 Depth Modification- - - - - - - - - - -B HDS Half Depth Shelf - - - - - - - - - - - - -D FDS Full Depth Shelf- - - - - - - - - - - - - -D 1ST 1 Standard Tray - - - - - - - - - - - - - -D 2ST 2 Standard Trays - - - - - - - - - - - - -D 4ST 4 Standard Trays - - - - - - - - - - - - -D 1FT 1 Standard Full-Width Tray - - - - -D 2FT 2 Standard Full-Width Trays - - - - -D 2DT 2 Deluxe Trays - - - - - - - - - - - - - - -D 4DT 4 Deluxe Trays - - - - - - - - - - - - - - -D 2DF 2 Deluxe Full-Width Trays - - - - - -D CFO Cabinet Front Only - - - - - - - - - - -G
A D UB24 HDS
Universal Base Single Door
A C D Specify R or L UB12 R or L HDS UB15 R or L HDS UB18 R or L HDS UB21 R or L HDS UB24 R or L HDS
• Back panel is pre-drilled for optional roll-out trays
- When depth is reduced to 12” or 15”, drawers become a false drawer front
- Tray options are available for cabinets with select depth modifications. See Construction Options for specifics
• Note: For tray or shelf options for select cabinets, replace HDS (10d) with the option code of your choice
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K - 12 @B - 15 @B - 18 @B - 21 @B + HDS @D
) FDS @D - 1ST @D - 2ST @D 4ST @D 1FT @D 2FT @D - 2DT @D 4DT @D 2DF @D ) CFO @G
32 ½˝
24˝
HDS option shown
Universal Base Single Door - Full-Height
A C D Specify R or L% UB9FH R or L UB12FH R or L HDS UB15FH R or L HDS UB18FH R or L HDS UB24FH R or L HDS
• Back panel is pre-drilled for optional roll-out trays
- Tray options are available for cabinets with select depth modifications. See Construction Options for specifics
• Note: For tray or shelf options for select cabinets, replace HDS (10d) with the option code of your choice
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K ) 12 @B ) 15 @B ) 18 @B ) 21 @B + HDS @D
- FDS @D - 1ST @D - 2ST @D 4ST @D 1FT @D 2FT @D - 2DT @D 4DT @D 2DF @D ) CFO @G
32 ½˝
24˝
HDS option shown
% Not available with tray or shelf options
Construction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
Uni
vers
al A
cces
s Cab
inet
s
I2 Universal Access Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . UB24RHDS
Universal Base Double Door
A D UB42 HDS UB24B HDS UB27B HDS UB30B HDS UB33B HDS UB36B HDS
• Back panel is pre-drilled for optional roll-out trays
- When depth is reduced to 12” or 15”, drawers become a false drawer front
- Tray options are available for cabinets with select depth modifications. See Construction Options for specifics
• Note: For tray or shelf options for select cabinets, replace HDS (10d) with the option code of your choice
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K - 12 @B - 15 @B - 18 @B - 21 @B + HDS @D
) FDS @D 1ST @D - 2ST @D - 4ST @D - 1FT @D - 2FT @D 2DT @D - 4DT @D - 2DF @D ) CFO @G
32 ½˝
24˝
HDS option shown
Gray color coding indicates new product, size or code.
Universal Base Table Butt Door
A D UBT24B HDS
• Cabinets with a “B” suffix to have BUTT doors without frame center stile
• Back panel is pre-drilled for optional roll-out trays
• Top drawer is replaced with full-width 20 1/4” wide, solid wood, pull-out tambour table with natural lacquer finish
• Pullout top has hardwood telescoping slides• Pull-out table extends 30” from front of
cabinet on telescoping hardwood slides• Drawer front must be attached to pullout
table by installer. Hardware and instructions included
• Not intended to be used as a chopping block• Note: For tray or shelf options for select
cabinets, replace HDS (10d) with the option code of your choice
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B + HDS @D
) FDS @D 1ST @D 2ST @D 4ST @D ) 1FT @D ) 2FT @D 2DT @D 4DT @D ) 2DF @D CFO @G
32 ½˝
24˝
HDS option shown
Universal Base Double Door - Full-Height
A D UB39FH HDS UB42FH HDS UB45FH HDS UB48FH HDS UB24BFH HDS UB27BFH HDS UB30BFH HDS UB33BFH HDS UB36BFH HDS
• Full-height doors• Cabinets with a “B” suffix to have BUTT doors
without frame center stile• Back is pre-drilled for optional shelves and
Roll-out Trays (ROT)- Tray options are available for cabinets with
select depth modifications. See Construction Options for specifics
• Note: For tray or shelf options for select cabinets, replace HDS (10d) with the option code of your choice
+ SST @K + SDT @K ) PST @K ) PDT @K ) ADT @K - 12 @B - 15 @B - 18 @B - 21 @B + HDS @D
) FDS @D 1ST @D - 2ST @D - 4ST @D - 1FT @D - 2FT @D 2DT @D - 4DT @D - 2DF @D ) CFO @G
32 ½˝
24˝
HDS Option shown
Universal Base Three Drawer
A UBD12-3D UBD15-3D UBD18-3D UBD21-3D UBD24-3D
• Standard height top drawer• Bottom drawers are deep• LaBelle standard height drawer front has a
flat recessed center panel, while deep drawer fronts have a raised center panel
+ SST @K ) SDT @K ) PST @K ) PDT @K ) ADT @K 12 @B 15 @B ) 18 @B ) 21 @B HDS @D
FDS @D 1ST @D 2ST @D 4ST @D 1FT @D 2FT @D 2DT @D 4DT @D 2DF @D ) CFO @G
32 ½˝
24˝
Universal A
ccess Cabinets
I3Universal Access Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . UB24RHDS
Universal Base Corner Revolving
A C Specify R or L UBCR36 R or L
• Two 28” diameter high impact, pie-cut revolving white plastic shelves
• Shelves rotate independently of doors and each other
• Shelf load rating of 15 lbs. per square foot, not to exceed 50 lbs.
• Shelf height cannot be adjusted• Two piece bi-fold door with
independent adjustment• Use Base End Panel Filler (BEPF3-
34) if end is exposed (requires 3” of space)
• 168° opening hinges on face frame door
• Full Overlay door style face frame stiles are notched to accept door hinges. Door hinging cannot be inverted in field
- SDT, PST and PDT orderable; shipped as SST• Note: Back panel (barrel) will not be plywood when ADT is ordered
> Do not design a corner cabinet adjacent to an object deeper than the end panel. The door of the corner cabinet may not function properly.
+ SST @K - SDT @K - PST @K - PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D
FDS @D 1ST @D 2ST @D 4ST @D 1FT @D 2FT @D 2DT @D 4DT @D 2DF @D ) CFO @G
32 ½˝
14 /˝
12˝
24˝
12˝24˝
36˝
36˝
6˝
6˝
28˝ shelf
diameter
Universal Base Lazy Susan
A UBLS36 • Two 28” diameter high impact, pie-
cut revolving white plastic shelves• Shelf load rating of 15 lbs. per
square foot, not to exceed 50 lbs.• Doors revolve with shelves• Shelf height cannot be adjusted• Available in Traditional Overlay
door styles only• Use Base End Panel Filler (BEPF3-
34) if end is exposed (requires 3” of space)
- SDT, PST and PDT orderable; shipped as SST
• Note: Back panel (barrel) will not be plywood when ADT is ordered
+ SST @K - SDT @K - PST @K - PDT @K ) ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D
FDS @D 1ST @D 2ST @D 4ST @D 1FT @D 2FT @D 2DT @D 4DT @D 2DF @D CFO @G
32 ½˝
14 /˝
12˝
24˝
12˝24˝
36˝
36˝
6˝
6˝
28˝ shelf
diameter
Uni
vers
al A
cces
s Cab
inet
s
I4 Universal Access Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . UB24RHDS
Universal Base Sink Front Butt Door - Full-Height
A UBSF36BFH
• Includes front frame and appropriate doors only
• Cabinets with a “B” suffix have BUTT doors without a center frame stile
• Not trimmable• No toe kick- Regardless of construction option, sink
front is constructed and shipped the same
• Two Full-height doors
+ SST @K + SDT @K + PST @K + PDT @K + ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D
FDS @D 1ST @D 2ST @D 4ST @D 1FT @D 2FT @D 2DT @D 4DT @D 2DF @D CFO @G
27˝
36˝
Universal Base Sink Front Cabinet Kit - Full-Height
A USFCK30BFH USFCK33BFH USFCK36BFH USFCK42FH
• Cabinets with a “B” suffix have BUTT doors without a center frame stile
• 3/8” thick engineered wood bottom panel with easy clean laminate on one side; back side unfinished
• 1/2” thick engineered wood toeboard• Toespace (toekick backer) assembly
shipped unassembled to floor• Includes floor- Regardless of construction option, sink
front is constructed and shipped the same
• Two Full-height doors
+ SST @K + SDT @K + PST @K + PDT @K + ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D
FDS @D 1ST @D 2ST @D 4ST @D 1FT @D 2FT @D 2DT @D 4DT @D 2DF @D CFO @G
32 ½˝
24˝
Universal Removable Sink Front Double Doors
A URSF30B URSF33B URSF36B URSF42
• Designed for easy field conversion from a standard sink base functionality to universal access open space
• Butt doors on 30”, 33”, and 36” widths; 42” is a double door with a center stile
• Permanently installed countertop support rail is 3-1/2” high x 3/4” thick solid wood
• Doors and frame are shipped pre-assembled
• 3/4” thick removable plywood bottom panel with support hardware / leveling legs and a removable clipped-on toeboard provided
• Matching solid wood baseboard provided for bottom panel support along the kitchen wall
• Frame, doors, floor bottom and toeboard can be flat packed for easy storage in a minimum amount of space
• Frame attached to bottom panel using quick connect (cam-locks) fasteners providing a solid tight joint
• Some field assembly required; instructions and hardware included• A Universal Access Panel (UAP) can be purchased separately to conceal/
protect the water and drain lines. See “Panels” section. Please specify specie and finish.
- Regardless of construction option, sink front is constructed and shipped the same
< Complete flooring under Universal Access Removable Sink Front to prepare for the future when sink front and plywood bottom is removed.
+ SST @K + SDT @K + PST @K + PDT @K + ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D
FDS @D 1ST @D 2ST @D 4ST @D 1FT @D 2FT @D 2DT @D 4DT @D 2DF @D CFO @G
32 ½˝
24˝ Gray color coding indicates new product, size or code.
Universal A
ccess Cabinets
I5Universal Access Cabinets
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . UB24RHDS
Universal Base Toekick Cover - Laminate
A TKCUL8 TKCUL8-4
• 5 7/16” high x 96” long x 1/8” thick MDF (Medium Density Fiberboard)
• Matching easy clean laminate on one side
• Grain direction runs lengthwise (when applicable)
• For Toffee with Java Glaze, use Maple Toffee
• Available in all finishes; Maple Accent Glaze shipped standard finish
• Offered individually or four per carton (32 ft.)
+ SST @K + SDT @K + PST @K + PDT @K + ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D
FDS @D 1ST @D 2ST @D 4ST @D 1FT @D 2FT @D 2DT @D 4DT @D 2DF @D CFO @G
96˝
5 /˝
Universal Base Toekick Cover - Veneer
A TKCUV8 TKCUV8-4
• 5 7/16” high x 96” long x 3/16” thick plywood
• Matching wood veneer plywood finished on one side, grain direction runs lengthwise
• Available in all finishes, except White; Maple Accent Glaze shipped standard finish
• Chiffon and Cotton glazes are shipped as standard finish
• Offered individually or four per carton (32 ft.)
+ SST @K + SDT @K + PST @K + PDT @K + ADT @K 12 @B 15 @B 18 @B 21 @B HDS @D
FDS @D 1ST @D 2ST @D 4ST @D 1FT @D 2FT @D 2DT @D 4DT @D 2DF @D CFO @G
96˝
5 /˝
Uni
vers
al A
cces
s Cab
inet
s
I6 Universal Access Cabinets
Notes
Panels-Shelving-Trays
J1Panels
PanelsConstruction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
CH Cherry - - - - - - - - - - - - - - - - - - - - -P HK Hickory - - - - - - - - - - - - - - - - - - - -P MP Maple - - - - - - - - - - - - - - - - - - - - -P RO Red Oak - - - - - - - - - - - - - - - - - - -P TH Thermofoil - - - - - - - - - - - - - - - - -P
A PB4896P
Panel Backer-Paper
A PB4896P PB4896P-2
• Use to cover exposed backs of base and tall cabinets in peninsula or island configurations
• Medium Density Fiberboard (MDF) panel with easy clean laminate on front side and unfinished backside
• Accent glaze shipped as standard finish • Available in Cotton and Chiffon • Chiffon and Cotton glazes are shipped as
standard finish• Offered individually or two per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
4’
GrainDirection
8’
/˝
Panel Backer-Veneer
A 4’ x 8’ PB4896 PB4896-2 8’ x 4’ PB9648 PB9648-2
• Use to cover exposed backs of base and tall cabinets in peninsula or island configurations
• Veneered plywood panel finished on one side
• Accent glaze shipped as standard finish • PB9648 and PB9648 -2 are not available in
Cotton and Chiffon • Chiffon and Cotton glazes are shipped as
standard finish• Offered individually or two per carton
+ CH @P + HK @P + MP @P + RO @P TH @P
4’
GrainDirection
8’
/˝
PB4896 shown
GrainDirection
8’
/˝
4’
PB9648 shown
Pane
ls-S
helv
ing-
Tray
s
J2 Panels
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . PB4896P
Panel Backer 3’ Tall-Paper
A Paper PB4834P PB4834P-4
• Use to cover exposed backs of base and tall cabinets in peninsula or island configurations
• Medium Density Fiberboard (MDF) panel with easy clean laminate on front side and unfinished backside
• Available in Chiffon and White• Offered individually or four per carton
CH @P HK @P + MP @P RO @P + TH @P
48˝
34 ½˝/˝
Panel Backer 3’ Tall-Veneer
A Veneer PB4834 PB4834-4
• Use to cover exposed backs of base and tall cabinets in peninsula or island configurations
• Veneered plywood panel finished on one side
• Available in all finishes; except Maple Accent Glaze shipped as standard
• Chiffon and Cotton glazes are shipped as standard finish
• Chiffon and Cotton are painted Maple• Offered individually or four per carton
+ CH @P + HK @P + MP @P + RO @P TH @P
48˝
34 ½˝/˝
Grain Direction
Universal Access Panel
• Designed for optional use with Removable Sink Front (RSF) and Universal Removable Sink Front (URSF)
• Conceals/protects drain and water lines• Includes one 9” and one 15” high, 3/4”
thick laminate plywood panel• Panels are held with hidden spring clips,
removable without tools for easy access to plumbing
• Must be trimmed when Base End Panels (BEP) are used on adjacent cabinets
• Specify species and finish• Installation instructions and mounting hardware included- Regardless of construction option, cabinet is constructed
and shipped the same
+ CH @P + HK @P + MP @P + RO @P + TH @P
32 ½˝
A UAP30 UAP33 UAP36 UAP42
Panels-Shelving-Trays
J3Panels
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . PB4896P
V- Groove Panel
A VGP4834 VGP4896
• Can be used as wainscoting or to cover exposed backs of base and tall cabinets in peninsula and island configurations
• 3/16” thick veneered plywood panel• V -grooves spaced on 1 1/2” centers• Finished one side only• Available in all finishes; Maple Accent
Glaze shipped standard finish• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
Grain Direction
48˝
34 ½˝or
96˝
/˝
CoreGuard® Panel Backer
A CGPB36 • Light beige engineered polymer
• Used to patch backs of CoreGuard® cabinets
• One per carton
CH @P HK @P MP @P RO @P TH @P
34 /˝
26 /˝
/˝
Pane
ls-S
helv
ing-
Tray
s
J4 Shelving
ShelvingConstruction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
CH Cherry - - - - - - - - - - - - - - - - - - - - -P HK Hickory - - - - - - - - - - - - - - - - - - - -P MP Maple - - - - - - - - - - - - - - - - - - - - -P RO Red Oak - - - - - - - - - - - - - - - - - - -P TH Thermofoil - - - - - - - - - - - - - - - - -P
A FS1813
Design Ideas
Create your own furniture component system using standard base cabinets and cabinet accessories:
1. Furniture end panel (FEP, located in located in Tall Cabinet Accessories)2. Furniture shelf (FS or HDFS, located in Shelving)3. Furniture valance (TBV, located in Shelving)4. Base cabinet with full-height doors (B30FH, located in Base Cabinets)5. Furniture end panel, center drilled (FEP-CE, located in Tall Cabinet Accessories)
3
3
4
2
2
2 5
1
5
1
4
1
Panels-Shelving-Trays
J5Shelving
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . FS1813
Furniture Shelf Kit
A 13” Deep FS1813 FS3013 FS3613 FS1384 21” Deep FS1821 FS3021 FS3621 FS2184
• 3/4” thick engineered wood• Shelf load rating of 15 lbs. per square foot, not to
exceed 50 lbs.• 13” deep for books and decorative accessories• 21” deep for electronics• Front and back edges finished• Available in all finishes, except Maple Accent Glaze
shipped standard finish• Cherry, Hickory, Maple, and Oak have wood veneer surfaces, except
Chiffon, Cotton and White• Chiffon, Cotton and White have matching laminate surfaces• Trimmed to fit installation• Shelf supports not included• Not available in All Plywood Construction (ADT) • One per carton
? For heavy -duty applications like supporting a television use heavy duty shelves
+ CH @P + HK @P + MP @P + RO @P + TH @P
13˝, 21˝ 18˝, 30˝, 36˝, 84˝
Shelf Top and Bottom
A 13” Deep STB1813 STB3013 STB3613 21” Deep STB1821 STB3021 STB3621
• 3/4” thick engineered wood• Includes: shelf, hanger rail (to attach to wall) and cam
lock fastener• Front and back edges finished• Available in all finishes, except Maple Accent Glaze
shipped standard finish• Cherry, Hickory, Maple, and Oak have wood veneer
surfaces, except Chiffon, Cotton and White• Chiffon, Cotton and White have matching laminate
surfaces• Not available in All Plywood Construction (ADT) • One per carton
? Furniture Top and Bottom Shelves are required for modular shelving system
+ CH @P + HK @P + MP @P + RO @P + TH @P
18˝, 30˝ 36˝13˝, 21˝
Heavy Duty Furniture Shelf Kit
AC 13” Deep HDFS3013 HDFS3613 21” Deep HDFS3021 HDFS3621
• 3/4” thick engineered wood • HDFS is reinforced and will support 30 lbs. per square
foot.• 13” deep for books and decorative accessories• 21” deep for electronics• Front and back edges finished• Available in all finishes, except Maple Accent Glaze
shipped standard finish• Cherry, Hickory, Maple, and Oak have wood veneer
surfaces, except Chiffon, Cotton and White• Chiffon, Cotton and White have matching laminate
surfaces• Adjustable shelves for use with modular shelving system• Includes four shelf supports• Not available in All Plywood Construction (ADT) • One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
13˝21˝
30˝, 36˝
¾˝ thick
Pane
ls-S
helv
ing-
Tray
s
J6 Shelving
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . FS1813
Toeboard/Valance
A TBV18 TBV30 TBV36
• Attaches between uprights on the underside of STB’s for decorative effect and to stabilize units
• Available in all finishes, except Maple Accent Glaze shipped standard finish
• Cherry, Hickory, Maple and Oak are 3/4” solid wood and have a traditional furniture shape on bottom
• Chiffon, Cotton and White are 3/4” engineered wood with matching laminate surfaces and straight finished bottom edge
• Not available in All Plywood Construction (ADT) • One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
18˝ 30˝ 36˝4 ¼˝
Shelf Kits
A Pantry Shelf Kit
10 19/32” deep PCSK3612-3/4 16 1/2” wide Utility Shelf Kit
10 19/32” deep USK1512-3/4 13 1/4” wide USK1812-3/4 16 1/4” wide USK2412-3/4 22 1/4” wide# USK3012-3/4 28 1/4” wide # USK3612-3/4 34 1/4” wide Utility Shelf Kit
22 19/32” deep USK1524-3/4 13 1/4” wide USK1824-3/4 16 1/4” wide USK2424-3/4 22 1/4” wide# USK3024-3/4 28 1/4” wide# USK3624-3/4 34 1/4” wide Vanity Shelf Kit
19 19/32” deep VLSK1521-3/4 13 1/4” wide VLSK1821-3/4 16 1/4” wide VLSK2421-3/4 22 1/4” wide
• 10 19/32” deep for use in bottom section of 12” deep utility cabinets, 22 19/32” deep for use in bottom section of 24” deep utility cabinets, 19 19/32” deep for use in bottom section of 24” deep utility cabinets
• 3/4” thick engineered wood shelves laminated on both sides with matching edge banding on the front edge, except USK3012 -3/4, USK3612 -3/4, USK3024 -3/4 and USK3624 -3/4
• USK3012 -3/4, USK3612 -3/4, USK3024 -3/4 and USK3624 -3/4 are 11/16” thick plywood shelves laminated on both sides, matching edge banding on the front edge and also include back supports
• Available in natural woodgrain finish• SDT, PST and PDT orderable; shipped as SST unless noted• Available in All Plywood Construction (ADT)• Kit includes: five shelves, 20 clear supports, 30” and 36”
wide shelf kits also include five clear back supports
+ CH @P + HK @P + MP @P + RO @P + TH @P
# All Plywood Construction (ADT)
Panels-Shelving-Trays
J7Trays
TraysConstruction Options and Modifications
Note: Determine the location of plumbing and other obstructions before ordering any tray kits
A BTK12
Base Tray Kit - Standard
A BTK12 BTK15 BTK18 BTK21 BTK24 BTK27 BTK27B BTK30B BTK33 BTK33B BTK36B BTK36/39 BTK39 BTK45
• Installs in 24” deep base and utility cabinets only using pre -drilled holes in back panels
• Includes tray core box, 3/4 extension left and right slides and installation hardware
• BTK15, BTK18, BTK24, BTK30B and BTK36B include brackets and screws for installing in Utility Cabinets (U), utilizing pre -drilled holes in cabinets and end panels
• Tray front made of solid hardwood covered with natural woodgrain laminate; tray sides, backs and bottom panel are made of engineered wood covered with a moisture - and stain -resistant, easy clean laminate. Top edge of sides and back finished with matching edge banding
• One tray per kit
Base Tray Kit - Double Faced, Standard
A BTK18DF BTK21DF BTK24DF BTK27BDF BTK30BDF
• Installs in Peninsula Base (PB) cabinets only using pre -drilled holes in face frames
• Tray front made of solid hardwood covered with natural woodgrain laminate; tray sides, backs and bottom panel are made of engineered wood covered with a moisture - and stain -resistant, easy clean laminate. Top edge of sides and back finished with matching edge banding
• Includes tray core box, 3/4 extension left and right slides and installation hardware
• One tray per kit
Base Deep Tray Kit
A BDTK12 BDTK15 BDTK18 BDTK21 BDTK24 BDTK27 BDTK27B BDTK30B BDTK33 BDTK33B BDTK36B BDTK39 BDTK45
• Installs in base and utility cabinets only using pre -drilled holes in back panel • Includes tray core box, 3/4 extension left and right slides and installation
hardware• Trays are made of 1/2” thick solid hardwood; bottoms are .205” thick
matching wood grain printed plywood covered with a moisture and stain resistant easy clean laminate
• Half -blind dovetail joinery all four corners• 1 15/16” deep finger pull at midpoint of tray front• 3 3/16” interior height along sides• BDTK15, BDTK18, BDTK24, BDTK30 and BDTK36 include brackets and screws
for installing in Utility Cabinets (U), utilizing pre -drilled holes in cabinets and end panels
• BDTK15, BDTK18, BDTK24, BDTK30 and BDTK36 include brackets for installing in Base Double Faced (BDF) cabinets
• Natural finish, not available in White• One tray per kit
J8
Pane
ls-S
helv
ing-
Tray
s
J8 Trays
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . BTK12
Base Deep Tray Kit - Side Mount Full Extension
• Installs in 30”, 33” and 36” base cabinets with butt doors using pre -drilled holes in back panel and most face frames
• Includes tray core box, full extension side mount ball bearing guides, and installation hardware
• Trays are made of 1/2” thick solid hardwood; bottoms are .205” thick matching wood grain printed plywood covered with a moisture and stain resistant easy clean laminate
• Half -blind dovetail joinery all four corners• 1 15/16” deep finger pull at midpoint of tray front• 3 3/16” interior height along sides• Natural finish• One tray per kit
Vanity Tray Kit
A VTK12 VTK15 VTK16 VTK18 VTK21 VTK24 VTK27B VTK30B VTK33B VTK36B
• Installs in 21” deep vanity cabinets only, using pre -drilled holes in back panel and some face frames
• Includes tray core box, 3/4 extension left and right slides and installation hardware
• Tray front made of solid hardwood covered with natural woodgrain laminate; tray sides, backs and bottom panel are made of engineered wood covered with a moisture - and stain -resistant, easy clean laminate. Top edge of sides and back finished with matching edge banding
• VTK15, VTK18 and VTK24 includes brackets and screws for installing in tall Vanity Linen (VLC) cabinets utilizing pre -drilled holes in the end panels
• VLC1848 cabinet end panels are not pre -drilled to accept VTK18
• One tray per kit
A BDTK30B-SMFE BDTK33B-SMFE BDTK36B-SMFE
Vanity Tray Kit - Space Saver
A VTKS12 VTKS15 VTKS18 VTKS24 VTKS27B VTKS30B VTKS33B VTKS36B
• Installs in 18” deep vanity space saver cabinets only, using pre -drilled holes in back panel and some face frames
• Includes tray core box, 3/4 extension left and right slides and installation hardware
• Tray front made of solid hardwood covered with natural woodgrain laminate; tray sides, backs and bottom panel are made of engineered wood covered with a moisture - and stain -resistant, easy clean laminate. Top edge of sides and back finished with matching edge banding
• One tray per kit
Panels-Shelving-Trays
J9Trays
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . BTK12
Roll-Out Trays - Solid Wood
A Vanity Cabinets
18” Deep ROT1518 ROT1818 ROT2418B ROT2718B ROT3018B Vanity Cabinets
21” Deep ROT1221 ROT1521 ROT1821 ROT2121 ROT2421B ROT2721B ROT3021B ROT3321B ROT3621B
A Base Cabinets
24” Deep ROT1224 ROT1524 ROT1824 ROT2124 ROT2424B ROT2724B ROT3024B ROT3324 ROT3324B ROT3624B ROT3924 ROT4524
• Installs in base, utility, vanity and vanity space saver cabinets utilizing pre -drilled holes in the back panel and some face frames
• Includes tray core box, 3/4 extension left and right slides and installation hardware
• .205” thick plywood bottom panel finished on the top side with a moisture and stain resistant, easy clean laminate with printed matching wood grain
• Solid hardwood tray core with 3/4” thick front and 1/2” thick sides and back
• ROT1524, ROT1824, ROT2424B, ROT3024B, and ROT3624B include brackets and screws for installing in 24” deep Utility (U) cabinets utilizing pre -drilled holes in both end panels
• ROT1521, ROT1821 and ROT2421B include brackets and screws for installing in 21” deep tall Vanity Linen Cabinets (VLC) utilizing pre -drilled holes in both end panels
• Natural finish• One tray per kit
BTK18DF
BTK21DF
BTK24DF
BTK27BDF
BTK30BDF
14 ¾˝
17 ¾˝
20 ¾˝
23 ¾˝
26 ¾˝
PB18, PB36
PB21
PB24, PB24B
PB27B
PB30B
Item Tray Width For Use In:
Pane
ls-S
helv
ing-
Tray
s
J10 Trays
BDTK12 8˝ B12, B12FH, BCD24DR-4D, BCD24DL-4D, SB12, UB12, UB12FH
BDTK15 11˝B15, B15FH, B30, B30FH, BCD30DR-4D, BCD30DL-4D, DSB30, PB30, SB15, SB30, SB30FH, SB30UT, U158424, U159024, U159324,U159624, UB15, UB15FH
BDTK18 14˝ B18, B18FH, B36, B36FH, B54, BCD36DR-4D, BCD36DL-4D, DSB36, PB18, PB36, SB18, SB36, SB36FH, SB36UT, U188424, U189024, U189324, U189624, UB18, UB18FH
BDTK21 17˝ B21, B21FH, B42, B42FH, PB21, SB21, SB42, SB42FH, SB42UT, UB21, UB42, UB42FH
BDTK24 20˝
B24, B24B, B24BFH, B24FH, B48, B48FH, PB24, PB24B, PBBC24/27, PBBC24/27B, SB24, SB24B, SB24FH, SB24BFH, SB24BUT, SB24UT, SB48, SB48FH, SB48UT, U248424, U248424B, U249024, U249024B, U249324, U249324B, U249624, U249624B, UB24, UB24B, UB24FH, UB24BFH, UB48FH, UBT24B
BDTK27 9 ½˝ BBC39/42
BDTK27B 23˝ B27B, B27BFH, PB27B, SB27B, SB27BFH, SB27BUT, UB27B, UB27BFH
BDTK30B 26˝ B30B, B30BFH, PB30B, SB30B, SB30BFH, SB30BUT, U308424B, U309024B, U309324B, U309624B, UB30B, UB30BFH
BDTK33 12 ½˝ B33, B33FH, BBC42/45, DSB33, SB33, SB33FH, SB33UT
BDTK33B 29˝ B33B, B33BFH, SB33B, SB33BFH, SB33BUT, UB33B, UB33BFH
BDTK36B 32˝ B36B, B36BFH, PB36B, SB36B, SB36BFH, SB36BUT, U368424B, U369024B, U369324B, U369624B, UB36B, UB36BFH
BDTK39 15 ½˝ B39, B39FH, BBC45/48, SB39, SB39FH, SB39UT, UB39FH
BDTK45 18 ½˝ B45, B45FH, BBC48/51, UB45FH
Item Tray Width For Use In:
BTK12 8 ¾˝ B12, B12FH, BCD24DL/R-4D, SB12, UB12, UB12FH
BTK15 11 ¾˝ B15, B15FH, B30, B30FH, BCD30DL/R-4D, DSB30, SB15, SB30, SB30FH, U158424, U159024, U159324, U159624, UB15, UB15FH
BTK18 14 ¾˝ B18, B18FH, B36, B36FH, B54, BCD36DL/R-4D, DSB36, SB18, SB36, SB36FH, U188424, U189024, U189324, U189624, UB18, UB18FH
BTK24 20 ¾˝ B24, B24B, B24FH, B24BFH, PBBC24/27, PBBC24/27B, B48, B48FH, SB24, SB24B, SB24FH, SB24BFH, SB48, SB48FH, U248424, U248424B, U249024, U249024B, U249324, U249324B, U249624, U249624B, UB24, UB24B, UB24FH, UB24BFH, UB48FH, UBT24B
BTK27 10 ¼˝ BBC39/42
BTK27B 23 ¼˝ B27B, B27BFH, SB27B, SB27BFH, UB27B, UB27BFH
BTK30B 26 ¼˝ B30B, B30BFH, SB30B, SB30BFH, U308424B, U309024B, U309324B, U309624B, UB30B, UB30BFH
BTK33 13 ¼˝ B33, B33FH, BBC42/45, DSB33, SB33, SB33FH
BTK33B 29 ¾˝ B33B, B33BFH, SB33B, SB33BFH, UB33B, UB33BFH
BTK36B 32 ¾˝ B36B, B36BFH, SB36B, SB36BFH, U368424B, U369024B, U369324B, U369624B
BTK36/39 7 ¼˝ BBC36/39
BTK39 16 ¼˝ B39, B39FH, BBC45/48, SB39, SB39FH, UB39FH
BTK45 19 ¼˝ B39, B39FH, BBC45/48, SB39, SB39FH, UB39FHB45, B45FH, BBC48/51, UB45FH
Item Tray Width For Use In:
Tray Availabilty Charts
Base Tray Kit - Standard
Base Tray Kit - Double Faced, Standard
Base Deep Tray Kit
Panels-Shelving-Trays
J11Trays
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . BTK12
BDTK30B-SMFE
BDTK33B-SMFE
BDTK36B-SMFE
25 /˝
28 /˝
31 /˝
Item Tray Width For Use In:
B30B, B30BFH, BSD30B, SB30B, SB30BFH, SB30BUT, UB30B, UB30BFH
B33B, B33BFH, SB33B, SB33BFH, SB33BUT, UB33B, UB33BFH
B36B, B36BFH, BSD36B, SB36B, SB36BFH, SB36BUT, UB36B, UB36BFH
Item Tray Width For Use In:
VB15, VB1535, VB30FH, VB3035FH, VB48FH, VB4835FH, VCD30DR/L, VCD3035DR/L, VLC1584, VLC1590, VLC1596, VSB48 -2D, VSB4835 -2D, VSB60 -2D VSB6035 -2D
VB18, VB1835, VB18FH, VB1835FH, VB36FH, VB3635FH, VB48FH, VB4835FH, VB54FH, VB5435FH, VCD36DR/L, VCD3635DR/L, VCD42, VCD4235, VCD48, VCD4835, VLC1884, VLC1890, VLC1896, VSB36 -2D, VSB3635 -2D, VSB42 -2D, VSB4235 -2D, VSB48 -2D, VSB4835 -2D, VSB54 -2D, VSB5435 -2D
VB24, VB2435, VB24B, VB24BFH, VB2435B, VB2435BFH, VB24SFH, VB2435SFH, VLC2484, VLC2484B, VLC2490, VLC2490B, VLC2496, VLC2496B, VSB24B, VSB2435B
VB30BFH, VB3035BFH, VSB30B, VSB3035BVB33BFH, VB3335BFH, VSB33B, VSB3335BVB36BFH, VB3635BFH, VSB36B, VSB3635B
VB12, VB1235, VB24FH, VB60FH, VB6035FH, VCD24DR/L, VCD2435DR/L, VSB42 -2D, VSB4235 -2D 8 ¾"VTK12
VTK15 11 ¾"
VB33FH, VB3335FHVTK16 13 ¼"
VTK18 14 ¾"
VB21, VB2135, VB21FH, VB2135FH, VB42FH, VB4235FH, VSB42, VSB4235, VSB54 -3D, VSB5435 -4DVTK21 17 ¾"
VTK24 20 ¾"
VB27BFH, VB2735BFH, VSB27B, VSB2735BVTK27B 23 ¾"VTK30B 26 ¾"
VTK36BVTK33B 29 ¾"
32 ¾"
Item Tray Width For Use In:
VTKS12
VTKS15
VTKS18
VTKS24
VTKS27B
VTKS30B
VTKS33B
VTKS36B
8 ¾"
11 ¾"
14 ¾"
20 ¾"
23 ¾"
26 ¾"
29 ¾"
32 ¾"
VB2418FH, VB6018FH, VCD2418DR/L
VB3618BFH, VB363518BFH
VB2418BFH, VB243518SFH, VB243518BFH
VB2718BFH, VB273518BFH
VB1818FH, VB3618FH, VB363518FH, VB5418FH, VCD3618DR/L
VB3018FH, VB303518FH, VB4818FH, VCD3018DR/L
VB3318BFH, VB333518BFH
VB3018BFH, VB303518BFH
Base Deep Tray Kit - Side Mount Full Extension
Vanity Tray Kit
Vanity Tray Kit - Space Saver
Pane
ls-S
helv
ing-
Tray
s
J12 Trays
Item (by depth) Tray Width For Use In:
18” depth
21” Deep
24” Deep
ROT1221
ROT1521
ROT1821
ROT2121
ROT2421B
ROT2721B
ROT3021B
ROT3321B
ROT3621B
ROT1224
ROT1524
ROT1824
ROT2124B
ROT2424B
ROT2724B
ROT3024B
ROT3324
ROT3324B
ROT3624B
ROT3924
ROT4524
ROT1518
ROT1818
ROT2418B
ROT2718B
ROT3018B
11 ¾"
14 ¾"
20 ¾"
23 ¾"
26 ¾"
VB3018FH, VB303518FH, VB4818FH, VB6018FH, VCD3018DR/L
VB1818FH, VB3618FH, VB363518FH, VB4818FH, VB5418FH, VCD3618DR/L
VB2418BFH, VB243518SFH, VB243518BFH
VB2718BFH, VB273518BFH
VB3018BFH, VB303518BFH
8 ¾"
11 ¾"
14 ¾"
17 ¾"
20 ¾"
23 ¾"
26 ¾"
29 ¾"
32 ¾" VB36BFH, VB3635BFH, VSB36B, VSB3635B
VB33BFH, VB3335BFH, VSB33B, VSB3335B
VB30BFH, VB3035BFH, VSB30B, VSB3035B
VB27BFH, VB2735BFH, VSB27B, VSB2735B
VB24, VB2435, VB24B, VB24BFH, VB2435B, VB2435BFH, VB24SFH, VB2435SFH, VLC2484, VLC2484B, VLC2490, VLC2490B, VLC2496, VLC2496B, VSB24B, VSB2435B
VB21, VB2135, VB21FH, VB2135FH, VB42FH, VB4235FH, VSB42, VSB4235, VSB54-3D, VSB5435-4D
VB18, VB1835, VB18FH, VB1835FH, VB36FH, VB3635FH, VB48FH, VB4835FH,VB54FH, VB5435FH, VCD36DR/L, VCD3635DR/L, VCD42, VCD4235, VCD48, VCD4835, VLC1884, VLC1890, VLC1896, VSB36-2D, VSB3635-2D, VSB42-2D,VSB4235-2D, VSB48-2D, VSB4835-2D, VSB54-2D, VSB5435-2D
VB15, VB1535, VB30FH, VB3035FH, VB48FH, VB4835FH, VB60FH, VB6035FH, VCD30DR/L, VCD3035DR/L, VLC1584, VLC1590, VLC1596, VSB48-2D, VSB4835-2D, VSB60-2D, VSB6035-2D
VB12, VB1235, VB24FH, VCD24DR/L, VCD2435DR/L, VSB42-2D, VSB4235-2D
8 ¾"
11 ¾"
14 ¾"
17 ¾"
20 ¾"
26 ¾"
23 ¾"
13 ¼"
29 ¾"
32 ¾"
16 ¼"
19 ¼"
B12, B12FH, BCD24DL/R-4D, SB12, UB12, UB12FH
B15, B15FH, B30, B30FH, BCD30DL/R-4D, DSB30, SB15, SB30, SB30FH, U158424, U159024, U159324, U159624, UB15, UB15FH
B18, B18FH, B36, B36FH, B54, BCD36DL/R-4D, DSB36, SB18, SB36, SB36FH, U188424, U189024, U189324, U189624, UB18, UB18FH
B21, B21FH, B42, B42FH, SB21, SB42, SB42FH, UB21, UB42, UB42FH
B24, B24B, B24FH, B24BFH, PBBC24/27, PBBC24/27B, B48, B48FH, SB24, SB24B, SB24FH, SB24BFH, SB48, SB48FH, U248424, U248424B, U249024, U249024B, U249324, U249324B, U249624, U249624B, UB24, UB24B, UB24FH, UB24BFH, UB48FH, UBT24B
B27B, B27BFH, SB27B, SB27BFH, UB27B, UB27BFH
B30B, B30BFH, SB30B, SB30BFH, U308424B, U309024B, U309324B, U309624B, UB30B, UB30BFH
B33, B33FH, BBC42/45, DSB33, SB33, SB33FH
B33B, B33BFH, SB33B, SB33BFH, UB33B, UB33BFH
B36B, B36BFH, SB36B, SB36BFH, U368424B, U369024B, U369324B, U369624B
B39, B39FH, BBC45/48, SB39, SB39FH, UB39FH
B45, B45FH, BBC48/51, UB45FH
Roll-Out Trays - Solid Wood
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . BTK12
Decorative Enhancem
ents
K1Supports and Valances
Supports and ValancesConstruction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
CH Cherry - - - - - - - - - - - - - - - - - - - - -P HK Hickory - - - - - - - - - - - - - - - - - - - -P MP Maple - - - - - - - - - - - - - - - - - - - - -P RO Red Oak - - - - - - - - - - - - - - - - - - -P TH Thermofoil - - - - - - - - - - - - - - - - -P
A CTSB
Countertop Support Bracket
A CTSB
• Solid wood• Vertical wood grain• For use as additional shelf or countertop
support• Available in all finishes• Chiffon, Cotton and White are solid
Maple with painted finish• Includes 2 recessed metal keyhole
brackets installed on backside• Mounting hardware included• Two per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
9"
9"
1"
Valance Raised Panel
A V30RP V36RP V42RP V48RP
• Solid wood raised center panels with cove profile
• 3/4” thick solid wood stiles and rails• For use between wall cabinets over
windows as a panel to conceal light fixtures
• Chiffon, Cotton and White are solid Maple with painted finish
• Finished on both sides • Can be trimmed in field 2” each end• Available in all finishes• One per carton
+ CH @P HK @P + MP @P + RO @P + TH @P
10˝
2 ½˝2 ¾˝
Valance Shaker
A 5 1/2” High V18SH V24SH V30SH V36SH V42SH V48SH V60SH V72SH V84SH
A 8” High V1808SH V2408SH V3008SH V3608SH V4208SH V4808SH V6008SH V7208SH V8408SH
• 3/4” thick solid wood• For use between wall cabinets over
windows as a panel to conceal light fixtures
• Chiffon, Cotton and White are solid Maple with painted finish
• Backside not intended to be viewed• Finished on both sides • No decorative profile along either long edge• Can be trimmed in field 1 1/2” each end• Available in all finishes• One per carton
+ CH @P + HK @P + MP @P + RO @P + TH @P
5 ½˝8˝
1 ½˝
3 /˝
3˝5 ½
Dec
orat
ive
Enha
ncem
ents
K2 Supports and Valances
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . CTSB
Valance Traditional
A 48” Long V48T 72” Long V72T 96” Long V96T
• Solid wood• For use between wall cabinets over
windows as a panel to conceal light fixtures
• Front and back sides are finished • Profiled edge• Chiffon, Cotton and White are solid
Maple with painted finish• Backside not intended to be viewed• Available in all finishes• Maple Accent Glaze has one accent line (AL) on front
profile• One per carton• Note: White has no profiled edges for a more
contemporary look. Not shown
+ CH @P + HK @P + MP @P + RO @P + TH @P
48˝ 72˝ 96˝4 ¼˝
AL
90°
¾˝
Decorative Enhancem
ents
K3Moldings
Moldings
Construction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
CH Cherry - - - - - - - - - - - - - - - - - - - - -P HK Hickory - - - - - - - - - - - - - - - - - - - -P MP Maple - - - - - - - - - - - - - - - - - - - - -P RO Red Oak - - - - - - - - - - - - - - - - - - -P TH Thermofoil - - - - - - - - - - - - - - - - -P
A AOSC8
Angled Outside Corner Molding - 135°
A AOSC8 AOSC8-25
• Solid wood• Used to cover joint when two panels
meet at 135°• Backs not finished• Available in all finishes; Maple Accent
Glaze shipped standard finish• Molding will be solid hardwood and
match the colors of our maple, cherry, hickory and oak finishes
• Offered in individual 8’ lengths or cartons of 25 (200 ft.)
135°
¾˝ ¾˝
1 /˝ /˝ /˝
Chair Rail Molding
A CR8 CR8-15
• Solid wood• Can also be used as a countertop nosing• Backs not finished• Available in all finishes, except Maple
Accent Glaze shipped standard finish• Molding will be solid hardwood and
match the colors of our maple, cherry, hickory and oak finishes
• Offered in individual 8’ lengths or cartons of 15 (120 ft.)
½˝
1 ½˝
Chair RailMolding
+ CH @P + HK @P + MP @P + RO @P + TH @P
+ CH @P + HK @P + MP @P + RO @P + TH @P
¾˝
¾˝
ICM8
¾˝
¾˝ /˝ Radius
/˝
/˝
ICPM8
1˝
¼˝
¼˝
1˝
OSC8
/˝
/˝
/˝
/˝
OSCP8
Dec
orat
ive
Enha
ncem
ents
K4 Moldings
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . AOSC8
Corner Molding
A Inside Corner Molding
Solid Wood ICM8 ICM8-25 Inside Corner Molding
Paper Wrapped ICPM8 ICPM8-20 Outside Corner Molding
Solid Wood OSC8 OSC8-25 Outside Corner Molding
Paper Wrapped OSCP8 OSCP8-20
• ICM8 and OSC8 are solid wood • ICPM8 and OSCP8 are paper wrapped
MDF or plastic • ICPM8 Oak and OSCP8 are MDF
wrapped in simulated woodgrain paper • ICM8 and OSC8 are available in all
finishes in Cherry, Hickory, Oak and Maple including Chiffon, Cotton and White
• ICM8 and OSC8 are not available with Maple Accent Glaze
• ICMP8 and OSCP8 are available in White and all finishes in Oak only
• ICPM8 and OSCP8 White are plastic wrapped in white paper
• Backs not finished• Molding will be solid hardwood and match the colors of
our maple, cherry, hickory and oak finishes• ICM8 and OSC8 offered in individual 8’ lengths or cartons
of 25 (200 ft.)• ICPM8 and OSC8 offered in individual 8’ lengths or
cartons of 20 (160 ft.)
Countertop Molding - Decorative Edge
A CTD8 CTD8-16
• Solid wood• Backs not finished• Available in all finishes• Used as countertop nosing• Can be used under wall cabinets to
conceal light fixtures• Maple Accent Glaze has one accent line
(AL) on front profile• Molding will be solid hardwood and match the colors of
our maple, cherry, hickory and oak finishes• Offered in individual 8’ lengths or cartons of 16 (128ft)
AL
¾˝
/˝
/˝
1 ½˝
+ CH @P + HK @P + MP @P + RO @P + TH @P
+ CH @P + HK @P + MP @P + RO @P + TH @P
Decorative Enhancem
ents
K5Moldings
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . AOSC8
Angle Crown Molding
A Finished ACM8 ACM8-6 Unfinished ACM8-UF ACM8-6-UF
• Solid wood• Installs directly to top of cabinet• Allow sufficient space between top
of cabinet and soffit or ceiling to accommodate molding
• Available in all finishes, except Maple Accent Glaze shipped standard finish and white finish
• Unfinished Maple recommended for use to finish White in the field
• For use with traditional or full overlay door styles• ACM8 -UF and ACM8 -6 -UF only available in unfinished
Cherry, Maple and Red Oak • Offered in individual 8’ lengths or cartons of six (48 ft.)
¾˝
¾˝
3 /˝ 1 /˝
/˝
2 /˝ 33°
Classic Crown Molding
A 8’ length CCM8 10’ length CCM-SW10
• Solid wood• Available in all finishes• Backs not finished• Allow sufficient space between top
of cabinet and soffit or ceiling to accommodate molding
• Maple Accent Glaze has one accent line (AL) on front profile
• Molding will be solid hardwood and match the colors of our maple, cherry, hickory and oak finishes
• Offered in individual 8’ and 10’ lengths
AL
2 /˝
2 /˝
Classic CrownMolding
Ceiling
WallCabinet
Crown Molding
A 8’ length CM8 CM8-15 10’ length CM-SW10 CM-SW10-15
• Solid wood• Available in all finishes• Backs not finished• Allow sufficient space between top
of cabinet and soffit or ceiling to accommodate molding
• Maple Accent Glaze has one accent line (AL) on front profile
• Molding will be solid hardwood and match the colors of our maple, cherry, hickory and oak finishes
• Offered in individual 8’ and 10’ lengths
1 ½˝
2 ¼˝
AL
Crown MoldilngWallCabinet
Ceiling
+ CH @P + HK @P + MP @P + RO @P TH @P
+ CH @P + HK @P + MP @P + RO @P + TH @P
+ CH @P + HK @P + MP @P + RO @P + TH @P
Dec
orat
ive
Enha
ncem
ents
K6 Moldings
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . AOSC8
Contemporary Crown Molding
A 8’ length CTC8 CTC8-4 10’ length CTC-SW10 CTC-SW10-4
• Solid wood• Available in all finishes• Backs not finished• Allow sufficient space between top
of cabinet and soffit or ceiling to accommodate molding
• Maple Glaze has two accent lines (AL) on front profile
• Molding will be solid hardwood and match the colors of our maple, cherry, hickory and oak finishes
• Offered in individual 8’ and 10’ lengths
2 /˝
2 /˝
AL
AL
Soffit Crown Molding
A 8’ length SCM8 10’ length SCM-SW10
• Solid wood• Available in all finishes• Backs not finished• Allow sufficient space between top
of cabinet and soffit or ceiling to accommodate molding
• Maple Accent Glaze has one accent line (AL) on front profile
• Molding will be solid hardwood and match the colors of our maple, cherry, hickory and oak finishes
• Offered in individual 8’ and 10’ lengths
AL
1 /˝
1 /˝
Dentil Molding
A DM8 • Solid wood
• Used to decorate/trim space between doors and ceilings/soffit. Can be combined with Classic Crown Molding (CCM8) to create a cornice effect
• Backs not finished• Available in all finishes, except Maple
Accent Glaze shipped standard finish• Molding will be solid hardwood and
match the colors of our maple, cherry, hickory and oak finishes
• Offered in individual 8’ lengths• Note: Dentil Molding (DM8) shown used with Classic
Crown Molding (CCM8)
/˝
½˝
+ CH @P + HK @P + MP @P + RO @P + TH @P
+ CH @P + HK @P + MP @P + RO @P + TH @P
+ CH @P + HK @P + MP @P + RO @P + TH @P
Decorative Enhancem
ents
K7Moldings
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . AOSC8
Furniture Base
A Contemporary Furniture Base CFB8 Traditional Furniture Base TFB8
• Solid wood• Backs not finished• Available in all finishes; Maple Accent
Glaze shipped standard finish• Molding will be solid hardwood and
match the colors of our maple, cherry, hickory and oak finishes
• Offered in individual 8’ lengths
¾˝
Radius ½˝
4 /˝
¾˝
CFB8
¾˝
Radius /˝
4 /˝
¾˝
TFB8
Galley Rail
A GR8 • Solid wood
• Used to trim top of wall cabinets for decorative effect
• Spindles are on 3” centers• Finished on all surfaces• Available in all finishes, except Maple
Accent Glaze, shipped standard finish• Molding will be solid hardwood and
match the colors of our maple, cherry, hickory and oak finishes
• Offered in individual 8’ height
/˝
2 /˝1/˝
½˝ ¼˝
¾˝ /˝
1 /˝
Inset Light Rail
A ILR8 ILR8-6
• Solid wood• Can be used under wall cabinets to
conceal light fixtures• Includes a 1 13/16” wide flat recess so
that it can be combined with other 3/4” wide decorative moldings such as Rope Molding (RM8) and Triple Beaded Edging (TBE8)
• All surfaces finished• Available in all finishes; Maple Accent Glaze shipped
standard finish• Molding will be solid hardwood and match the colors of
our maple, cherry, hickory and oak finishes• Offered in individual 8’ lengths or cartons of six (48 ft.)
¾˝
¾˝
/˝
1 /˝ 1/˝
/˝
/˝
/˝
¾˝
1 /˝
/˝
1 /˝
/˝
InsetLight Rail
WallCabinet
+ CH @P + HK @P + MP @P + RO @P + TH @P
+ CH @P + HK @P + MP @P + RO @P + TH @P
+ CH @P + HK @P + MP @P + RO @P + TH @P
Dec
orat
ive
Enha
ncem
ents
K8 Moldings
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . AOSC8
Library Molding
A LM8 LM8-10
• Solid wood• Available in all finishes; Maple Accent
Glaze shipped standard finish• Includes a 1 9/16” wide flat recess so
that it can be combined with other decorative moldings
• Backs not finished• Molding will be solid hardwood and
match the colors of our maple, cherry, hickory and oak finishes
• Offered in individual 8’ lengths or cartons of 10 (80 ft.)¾˝
¼˝
½˝
1 /˝
/ ̋
2 /˝
Mirror Molding
A MM8 MM8-2
• Used to trim and support mirror glasses• Can be used with 1/8” or 1/4” thick
mirror glass or picture framing. 1/8” mirror glass requires 1/8” masonite backer
• Backs not finished• Available in all finishes• Maple Glaze has two accent lines (AL)
on front profile• Molding will be solid hardwood and match the colors of
our maple, cherry, hickory and oak finishes• Offered in individual 8’ lengths or cartons of two (16 ft.)
¾˝
2 /˝
AL
AL
½˝
¼˝
Narrow Batten Molding
A NBM8 NBM8-25
• Solid wood• Backs not finished• Available in all finishes, except Maple
Accent Glaze shipped standard finish• Molding will be solid hardwood and
match the colors of our maple, cherry, hickory and oak finishes
• Offered in individual 8’ lengths or cartons of 25 (200 ft.)
Radius /˝
Radius /˝
¼˝
¾˝
+ CH @P + HK @P + MP @P + RO @P + TH @P
+ CH @P + HK @P + MP @P + RO @P + TH @P
+ CH @P + HK @P + MP @P + RO @P + TH @P
Decorative Enhancem
ents
K9Moldings
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . AOSC8
Quarter Round Molding
A QR8 QR8-28
• Solid wood• Can be used to trim between toe kick
and floor• Backs not finished• Available in all finishes; Maple Accent
Glaze shipped standard finish• Moldings may be shipped with the back
corner mitered off• Molding will be solid hardwood and
match the colors of our maple, cherry, hickory and oak finishes
• Offered in individual 8’ lengths or cartons of 28 (224 ft.)
Radius /˝
/˝
/˝
Radius Cabinet Molding
A RCM8 RCM8-6
• Solid wood• Used as decorative molding above or
below wall cabinets. Can also be used to conceal light fixtures
• Backs not finished• Available in all finishes; Maple Accent
Glaze shipped standard finish• Molding will be solid hardwood and
match the colors of our maple, cherry, hickory and oak finishes
• Offered in individual 8’ lengths or cartons of six (48 ft.)
¾˝
/˝ 1 ½˝
2 ½˝
WallCabinet
RadiusCabinetMolding
Rope Molding
A RM8 • Solid wood
• Half round• Right twist• Backs not finished• Available in all finishes; Maple Accent
Glaze shipped standard finish• Can be combined with Classic Crown
Molding (CCM8) and Inset Light Rail (ILR8)
• Molding will be solid hardwood and match the colors of our maple, cherry, hickory and oak finishes
• Offered in individual 8’ lengths
¾˝
+ CH @P + HK @P + MP @P + RO @P + TH @P
+ CH @P + HK @P + MP @P + RO @P + TH @P
+ CH @P + HK @P + MP @P + RO @P + TH @P
Dec
orat
ive
Enha
ncem
ents
K10 Moldings
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . AOSC8
Scribe Molding
A Scribe Molding
Solid Wood SM8 SM8-63 Paper Wrapped SPM8 SPM8-100 Wide Scribe Molding
Solid Wood WSM8 WSM8-25
• SM8 is solid wood• SM8 available in all finishes in Cherry,
Hickory, Maple and Oak. Maple Accent Glaze shipped standard finish
• SM8 not finished on 1/4” bottom or 3/4” backside
• SPM8 is paper wrapped MDF (Medium Density Fiberboard) available in all Oak finishes and White only
• SPM8 Oak is paper wrapped in simulated wood• SPM8 not finished on 23/32” backside• Molding will be solid hardwood and match the colors of
our maple, cherry, hickory and oak finishes• SPM8 offered in individual 8’ lengths or cartons of 100
(800 ft.)• SM8 offered in individual 8’ lengths or cartons of 63 (504
ft.)
¾˝
Radius ¼˝
¼˝ SM8
/˝
Radius /˝
¼˝ SPM8
Radius /˝
¼˝
1 ½˝
WSM8
Scribe Cove Molding
A SCV8 SCV8-25
• Solid wood• Can be used for full or traditional
overlay applications• Available in all finishes; Maple Accent
Glaze shipped standard finish• Allow sufficient space between top
of cabinet and soffit or ceiling to accommodate molding
• Backs not finished• Molding will be solid hardwood and match the colors of
our maple, cherry, hickory and oak finishes• Offered in individual 8’ lengths or cartons of 25 (200 ft.)
/˝
½˝
WallCabinet
Ceiling
Scribe CoveMolding
+ CH @P + HK @P + MP @P + RO @P + TH @P
+ CH @P + HK @P + MP @P + RO @P + TH @P
Decorative Enhancem
ents
K11Moldings
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . AOSC8
Shoe Molding
A SHO8 SHO8-25 • Solid wood
• Used as inside corner molding or trim between toekick and floor
• Backs not finished• Available in all finishes; Maple Accent
Glaze shipped standard finish• Molding will be solid hardwood and
match the colors of our maple, cherry, hickory and oak finishes
• Offered in individual 8’ lengths or cartons of 25 (200 ft.)
Radius ½˝
/˝
½˝
Single Bead Pilaster
A SBP8 • Solid wood
• Available in all finishes; Maple Accent Glaze shipped standard finish
• Finished on all sides• Used as decorative trim panel vertically
between Base, Vanity, Tall and Wall cabinets. Can also be used as a decorative valance
• Offered in individual 8’ lengths
¾˝
4 ¼˝
Single Bead Trim
A SBT8
• Solid wood• Available in all finishes; Maple Accent
Glaze shipped standard finish• Backs not finished• Used to trim the front edge of panels.
Can also be combined with Classic Crown Molding (CCM8) and Inset Light Rail (ILR8)
• Offered in individual 8’ lengths
¾˝
½˝
+ CH @P + HK @P + MP @P + RO @P + TH @P
+ CH @P + HK @P + MP @P + RO @P TH @P
+ CH @P + HK @P + MP @P + RO @P + TH @P
Dec
orat
ive
Enha
ncem
ents
K12 Moldings
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . AOSC8
Solid Wood Stock
A C SWS4 48” (4 ft.) 48” (4 ft.) SWS6 72” (6 ft.) 72” (6 ft.) SWS8 96” (8 ft.) 96” (8 ft.)
• 3/4” thick solid wood• Grain direction runs lengthwise• Can be used for valance, filler, shelf
or other matching finish, cut -to -size applications
• Finished on both sides and both long edges
• Molding will be solid hardwood and match the colors of our maple, cherry, hickory and oak finishes
• One per carton
6˝ 48˝ 72˝ 96˝¾˝
Starter Molding
A Starter Molding
STR8 Large Starter Molding LSTR8
• Solid wood• Used at top of wall and tall cabinets to
allow attachment of crown molding or as a filler between cabinet and ceiling/soffit
• Shipped in one piece• Backs not finished• Available in all finishes, except Maple
Accent Glaze shipped standard finish• Molding will be solid hardwood and match the colors of
our maple, cherry, hickory and oak finishes• Offered in individual 8’ lengths
¾˝
¾˝
3˝
6˝
/˝ Radius/˝ Radius
LSTR8
CrownMolding
StarterMolding
StarterMolding
WallCabinet
WallCabinet
Ceiling/Soffit
¾˝
¾˝
3˝
3˝
/˝ Radius
/˝ Radius
STR8
WallCabinet
WallCabinet
Ceiling/Soffit
CrownMolding
StarterMolding
StarterMolding
+ CH @P + HK @P + MP @P + RO @P + TH @P
+ CH @P + HK @P + MP @P + RO @P + TH @P
Decorative Enhancem
ents
K13Moldings
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . AOSC8
Tapestry Insert Molding
A Finished TIM8 TIM8-25 Unfinished TIM8-UF TIM8-25-UF
• Solid wood• Hand carved details provide a custom one -of -a -kind look• Grain direction runs lengthwise• Design is 1 13/16” wide and repeats 53 times in 8’• Flat on two sides• Can be combined with Classic Crown Molding (CCM8)• Available in all finishes except Maple Accent Glaze, Chiffon,
Cotton and White• Maple Accent Glaze shipped standard finish• Available in Chiffon Glazes and Cotton Glazes, which are painted Maple• Hickory finishes use Red Oak• Unfinished Maple is recommended for use when finishing Chiffon and White
in the field. To order unfinished, select (TIM -UF)• Available in unfinished Cherry, Maple and Red Oak• Not available in unfinished Hickory• Molding will be solid hardwood and match the colors of our maple, cherry,
hickory and oak finishes• Offered in individual 8’ lengths or cartons of 25 (200 ft.)
/˝1 /˝
/˝
½˝
Toekick Cover - Laminate
A TKCL8 TKCL8-4
• 4 7/16” high x 96” long x 1/8” thick MDF (Medium Density Fiberboard)
• Matching easy clean laminate on one side• Grain direction runs lengthwise (when applicable)• For Oatmeal with Desert Glaze, use Maple Oatmeal• For Toffee with Java Glaze, use Maple Toffee• Available in all finishes; Maple Accent Glaze shipped
standard finish• Offered individually or four per carton (32 ft.)96˝
4 /˝
⅛˝ thick MDF medium density fiberboard
Toekick Cover - Veneer
A TKCV8 TKCV8-4
• 4 7/16” high x 96” long x 1/8” thick MDF (Medium Density Fiberboard)
• Matching wood veneer plywood finished on one side, grain direction runs lengthwise
• Available in all finishes; Maple Accent Glaze shipped standard finish
• Chiffon and Cotton glazes are shipped as standard finish• Not available in white • Offered individually or four per carton (32 ft.)96˝
4 /˝
⁄˝ thick plywood
+ CH @P + HK @P + MP @P + RO @P TH @P
+ CH @P + HK @P + MP @P + RO @P + TH @P
+ CH @P + HK @P + MP @P + RO @P TH @P
Dec
orat
ive
Enha
ncem
ents
K14 Moldings
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . AOSC8
Triple Bead Edging
A TBE8 TBE8-25
• Solid wood• Available in all finishes; Maple Accent
Glaze shipped standard finish• Backs not finished• Used to trim the front edge of panels.
Can also be combined with Classic Crown Molding (CCM8) and Inset Light Rail (ILR8)
• Molding will be solid hardwood and match the colors of our maple, cherry, hickory and oak finishes
• Offered in individual 8’ lengths or cartons of 25 (200 ft.)
¾˝
½˝
¼˝
Triple Bead Pilaster
A TBP8 • Solid wood
• Available in all finishes; Maple Accent Glaze shipped standard finish
• Finished on all sides• Used as decorative trim panel
vertically between Base, Vanity, Tall and Wall cabinets. Can also be used as a decorative valance
• Molding will be solid hardwood and match the colors of our maple, cherry, hickory and oak finishes
• Offered in individual 8’ lengths
4 ¼˝
¾˝¼˝
Under Cabinet Molding
A UCM8 UCM8-11
• Solid wood• Can be used under wall cabinets to
conceal light fixtures• Can be used for full or traditional
overlay applications• Profile complements most door styles• All surfaces finished• Available in all finishes• Maple Accent Glaze has one accent line (AL) on front
profile• Can be combined with Panel Backer (PB) or Wall End
Panel (WEP) to create a flush color -matched underside• Molding will be solid hardwood and match the colors of
our maple, cherry, hickory and oak finishes• Offered in individual 8’ lengths or cartons of 11 (88 ft.)
¼˝
2 /˝
¾˝AL
½˝
WallCabinet Under Cabinet
Molding
Panel Backer (PB)
+ CH @P + HK @P + MP @P + RO @P + TH @P
+ CH @P + HK @P + MP @P + RO @P + TH @P
+ CH @P + HK @P + MP @P + RO @P + TH @P
Decorative Enhancem
ents
K15Moldings
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . AOSC8
Windmere Rope Molding
A Finished WRM8 WRM8-25 Unfinished WRM8-UF WRM8-25-UF
• Solid wood• Hand carved details provide a custom
one -of -a -kind look• Grain direction runs lengthwise• Flat on three sides• Right twist• Can be combined with Classic Crown
Molding (CCM8)• Available in all finishes; Maple Accent Glaze shipped
standard finish• Hickory finishes use Red Oak• Available in unfinished Cherry, Maple and Red Oak• Not available in unfinished Hickory• Molding will be solid hardwood and match the colors of
our maple, cherry, hickory and oak finishes• Offered in individual 8’ lengths or cartons of 25 (200 ft.)
/˝
/˝
+ CH @P + HK @P + MP @P + RO @P TH @P
Dec
orat
ive
Enha
ncem
ents
K16 Molding Accents
Molding AccentsConstruction Options and Modifications
+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available
CH Cherry - - - - - - - - - - - - - - - - - - - - -P HK Hickory - - - - - - - - - - - - - - - - - - - -P MP Maple - - - - - - - - - - - - - - - - - - - - -P RO Red Oak - - - - - - - - - - - - - - - - - - -P TH Thermofoil - - - - - - - - - - - - - - - - -P
A ECB312
Estero Corbel Large
A Finished ECB312 Unfinished ECB312-UF
• Solid wood• Hand carved details provide a custom, “one of a kind” look• Vertical wood grain• Includes two recessed metal keyhole brackets• Does not include screws• Available in all Cherry and Maple finishes; except Maple
Accent Glaze shipped standard finish• Available in Chiffon and Cotton which are painted maple• ECB312 -UF only available in unfinished Cherry and Maple• One per carton
+ CH @P HK @P + MP @P RO @P + TH @P
9˝ 3˝
12˝
2 /̋
Estero Corbel Small
A Finished ECB49 Unfinished ECB49-UF
• Solid wood• Hand carved details provide a custom, “one of a kind” look• Vertical wood grain• Includes two recessed metal keyhole brackets• Does not include screws• Available in all Cherry and Maple finishes; except Maple
Accent Glaze shipped standard finish• Available in Chiffon and Cotton which are painted maple• ECB49 -UF only available in unfinished Cherry and Maple• One per carton
+ CH @P HK @P + MP @P RO @P + TH @P
6˝ 4˝
9˝
Estero Foot
A Finished EFT Unfinished EFT-UF
• Solid wood• Vertical wood grain• Matches toespace of height of base, tall, and vanity
cabinets, except Universal Cabinets• Available in all Cherry and Maple finishes; except Maple
Accent Glaze shipped standard finish• Available in Chiffon and Cotton which are painted maple• Unfinished Maple recommended for use to finish White in
the field • EFT -UF only available in unfinished Cherry and Maple• One per carton
+ CH @P HK @P + MP @P RO @P TH @P
3˝ square2 ½˝ square
4 ½˝
1 ½˝ square
Estero Leg Base
A Finished ELB Unfinished ELB-UF
• Solid wood• Vertical wood grain• Matches height of base cabinets• Available in all Cherry and Maple finishes; except Maple
Accent Glaze shipped standard finish• Available in Chiffon and Cotton which are painted maple• Unfinished Maple recommended for use to finish White in
the field • ELB -UF only available in unfinished Cherry and Maple• One per carton
+ CH @P HK @P + MP @P RO @P TH @P
3˝ square
5˝
34 ½˝
Decorative Enhancem
ents
K17Molding Accents
Q P O N M L K J I H SVL . CH . S . NANON . N . NNNN . SST . S . C . ECB312
Tapestry Corbel Large
A Finished TCB312 Unfinished TCB312-UF
• Solid wood• Hand carved details provide a custom, “one of a kind” look• Vertical wood grain• Includes two recessed metal keyhole brackets• Does not include screws• Available in all Cherry and Maple finishes; except Maple
Accent Glaze shipped standard finish• Chiffon and Cotton only available with glaze finishes and
are painted Maple• Unfinished Cherry and Maple recommended for use to finish Chiffon, Cotton
and White in the field • TCB312 -UF only available in unfinished Cherry and Maple • One per carton
+ CH @P HK @P + MP @P RO @P TH @P
9˝ 3˝
12˝
Tapestry Corbel Small
A Finished TCB49 Unfinished TCB49-UF
• Solid wood• Hand carved details provide a custom, “one of a kind” look• Vertical wood grain• Includes two recessed metal keyhole brackets• Does not include screws• Available in all Cherry and Maple finishes; except Maple
Accent Glaze shipped standard finish• Chiffon and Cotton only available with glaze finishes and
are painted Maple• Unfinished Cherry and Maple recommended for use to finish Chiffon, Cotton
and White in the field • TCB49 -UF only available in unfinished Cherry and Maple• One per carton
+ CH @P HK @P + MP @P RO @P TH @P
6˝ 4˝
9˝
Tapestry Foot
A Finished TFT Unfinished TFT-UF
• Solid wood• Vertical wood grain• Matches toespace of height of base, tall, and vanity
cabinets, except Universal Cabinets• Available in all Cherry and Maple finishes; except Maple
Accent Glaze shipped standard finish• Available in Chiffon and Cotton which are painted maple• Unfinished Maple recommended for use to finish White in
the field • TCB49 -UF only available in unfinished Cherry and Maple• One per carton
+ CH @P HK @P + MP @P RO @P TH @P
2 ½˝ square
4 ½˝
2 /˝ diameter
/˝ dia.
Bottom View
Tapestry Leg Base
A Finished TLB Unfinished TLB-UF
• Solid wood• Vertical wood grain• Matches height of base cabinets• Available in all Cherry and Maple finishes; except Maple
Accent Glaze shipped standard finish• Available in Chiffon and Cotton which are painted maple• Unfinished Maple recommended for use to finish White in
the field • TLB -UF only available in unfinished Cherry and Maple• One per carton
+ CH @P HK @P + MP @P RO @P TH @P
3˝ square
5˝
34 ½˝
Dec
orat
ive
Enha
ncem
ents
K18 Molding Accents
Q P O N M L K J I H SVL . CH . S . NANON . N . NNNN . SST . S . C . ECB312
Windmere Corbel Large
A Finished WCB312 Unfinished WCB312-UF
• Solid wood• Hand carved details provide a custom, “one of a kind” look• Vertical wood grain• Includes two recessed metal keyhole brackets• Does not include screws• Available in all Cherry and Maple finishes; except Maple
Accent Glaze shipped standard finish• Available in Chiffon and Cotton which are painted maple• WCB312 -UF only available in unfinished Cherry and Maple• One per carton
+ CH @P HK @P + MP @P RO @P + TH @P
9˝ 3˝
12˝
Windmere Corbel Small
A Finished WCB49 Unfinished WCB49-UF
• Solid wood• Hand carved details provide a custom, “one of a kind” look• Vertical wood grain• Includes two recessed metal keyhole brackets• Does not include screws• Available in Chiffon and Cotton which are painted maple• Chiffon, Cotton and White are painted Maple • WCB49 -UF only available in unfinished Cherry or Maple• One per carton
+ CH @P HK @P + MP @P RO @P + TH @P
6˝ 4˝
9˝
Windmere Foot
A Finished WDFT Unfinished WDFT-UF
• Solid wood• Vertical wood grain• Matches toespace of height of base, tall, and vanity
cabinets, except Universal Cabinets• Available in all Cherry and Maple finishes; except Maple
Accent Glaze shipped standard finish• Unfinished Maple recommended for use to finish White in
the field • WDFT -UF only available in unfinished Maple and Cherry• One per carton
+ CH @P HK @P + MP @P RO @P TH @P4 ½˝
2 ½˝ diameter
Windmere Leg Base
A Finished WDLB Unfinished WDLB-UF
• Solid wood• Vertical wood grain• Matches height of base cabinets• Available in all Cherry and Maple finishes; except Maple
Accent Glaze shipped standard finish• Unfinished Maple recommended for use to finish White in
the field • WDLB -UF only available in unfinished in Maple and Cherry• One per carton
+ CH @P HK @P + MP @P RO @P TH @P
3˝ square
5˝
34 ½˝
Decorative Enhancem
ents
K19Molding Accents
Q P O N M L K J I H SVL . CH . S . NANON . N . NNNN . SST . S . C . ECB312
Tapered Foot
A Finished PFT Unfinished PFT-UF
• Solid wood• Vertical wood grain• Does not match toespace height of Base, Tall, Vanity or
Universal cabinets, must be trimmed• PFT -UF available in unfinished Cherry, Maple and Red
Oak. Not available in unfinished Hickory• Available in all Cherry and Maple finishes; except Maple
Accent Glaze shipped standard finish• Chiffon and Cotton are painted Maple• One per carton
+ CH @P + HK @P + MP @P + RO @P TH @P
6˝
4˝
2˝
2 ½˝
Top View
2 ½˝
Bottom View
1 ¾˝
Tapered Leg Base
A Finished PLB Unfinished PLB-UF
• Solid wood• Vertical wood grain• Matches height of base cabinets• Trimmed to fit installation• Available in all finishes, except Maple Accent Glaze
shipped standard finish• Chiffon and Cotton are painted Maple• Hickory finishes use Red Oak in place of Hickory• PLB -UF available in unfinished Cherry, Maple and Red Oak. Not available in
unfinished Hickory• One per carton
+ CH @P + HK @P + MP @P + RO @P TH @P
34 ½˝
3 ¾˝
2 ½˝
Top View
2 ½˝
Bottom View
1 /˝
Plain Square Post
A PSP6-30 PSP6-34 PSP6-36 PSP6-42
• Vertical wood grain• For use as a decorative accent• 1/8” thick radius corners• Available in all Cherry, Maple and Red Oak finishes;
except Maple Accent Glaze shipped standard finish• Chiffon, Cotton and White are painted Maple • Not available unfinished• Mitered corners provide the appearance of one piece
solid wood• 3/4” thick solid wood sides with 4 1/2” square hollow center• One per carton
+ CH @P HK @P + MP @P + RO @P + TH @P
6˝ square
30˝34 ½˝36˝42˝
Spindles
A Spindle
Finished SP5-36 SP5-42 Spindle
Unfinished SP5-36-UF SP5-42-UF Roman Spindle
Finished RSP5-36 RSP5-42 Roman Spindle
Unfinished RSP5-36-UF RSP5-42-UF
• Solid wood• Vertical wood grain• For use as a decorative accent• 1/8” thick radius corners• Available in all Cherry, Maple and Red Oak finishes;
except Maple Accent Glaze shipped standard finish• Chiffon and Cotton are painted Maple• SP5 -36 -UF, SP5 -42 -UF, RSP5 -36 -UF, and RSP5 -42 -UF only
available in unfinished maple• For 34 1/2” tall applications, order a SP536 or RSP5 and field cut• One per carton
+ CH @P HK @P + MP @P + RO @P + TH @P
36˝42˝
6 /˝
6 /˝
4 ¾˝ square
RSP5
7˝
36˝42˝
6 ½˝
4 ¾˝ square
SP5
K20 Hardware - Knobs
Dec
orat
ive
Enha
ncem
ents
Hardware - Knobs
White Ceramic Knob
A HK02 HK02-100
Satin Nickel Rope Knob
A HK107 HK107-100
Solid Bright Brass Knob
A HK108 HK108-100
Satin Nickel Knob
A HK109 HK109-100
Black Nickel Knob
A HK110 HK110-100
Bright Chrome Knob
A HK111 HK111-100
Satin Aluminum Knob
A HK117 HK117-100
Antique Iron Knob
A HK119 HK119-100
Satin Nickel Knob
A HK120 HK120-100
Antique Pewter Braided Knob
A HK123 HK123-100
Copper-Pewter Knob
A HK125 HK125-100
Rusty Flower Knob
A HK126 HK126-100
Dusty Copper Flower Knob
A HK127 HK127-100
Antique Pewter Flower Knob
A HK128 HK128-100
Satin Nickel Knob
A HK137 HK137-100
A HK02-100
K21Hardware - Knobs
Decorative Enhancem
ents Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . HK02-100
Satin Nickel Football Shaped Knob
A HK138 HK138-100
Brushed Satin Pewter French Tassel Round Knob
A HK150 HK150-100
Black Ceramic Insert Round Knob
A HK152 HK152-100
Tumbled Dark Gunmetal Round Knob
A HK155 HK155-100
Oil Rubbed Bronze Round Knob
A HK157 HK157-100
Satin Nickel Diminishing Knob
A HK158 HK158-100
1 /˝
Ochre Finished Ceramic Totem Knob
A HK161 HK161-100
Venetian Bronze Copper French Lace Knob
A HK162 HK162-100
SKUDescription
HK02
HK107
HK108
HK109
HK110
HK111
HK117
HK119
SKUDescription
White Ceramic KnobSatin Nickel Rope KnobSolid Bright Brass Knob
Brushed Satin Nickel Knob
Black NickelKnobBright ChromeKnob
Satin Aluminium Knob
Antique IronKnob
SKUDescription
Rusty FlowerKnob
Dusty Copper Flower KnobAntique Pewter Flower Knob
Modern Satin NickelKnob
Satin Nickel FootballShaped Knob
Satin Nickel Round KnobAntique Pewter Braided KnobCopper-PewterKnob
HK126
HK127
HK128
HK137
HK120
HK123
HK125
HK138
HK157
HK158
HK161
HK162
HK150
HK152
HK155
Oil Rubbed BronzeRound Knob
Satin Nickel Diminishing KnobOchre Finished CeraminTotem Knob
Venetian Bronze CopperFrench Lace Knob
Brushed Satin PewterFrench Tassel Round Knob
Black Ceramic InsertRound KnobTumbled GunmetalRound Knob
Dimensions(H x D)
Dimensions(H x D)
Dimensions(H x D)
23mm x30mm
27mm x30mm
27mm x30mm
27mm x30mm27mm x30mm27mm x30mm
28mm x36mm
28mm x36mm
37mm x62mm
25mm x37mm
26mm x36mm
26mm x36mm26mm x36mm25mm x30mm37mm x35mm
31mm x38mm31mm x35mm
29mm x37mm
32mm x35mm
32mm x38mm
27mm x33mm
Knob Dimensions
2 /˝
K22 Hardware - Pulls
Hardware - Pulls
Satin Nickel Suitcase Pull
A HP103 HP103-100
3 /˝
Satin Nickel Rope Pull
A HP106 HP106-100
3 /˝
Satin Aluminum Boat Cleat Transitional Pull
A HP112 HP112-100
3 /˝
Satin Nickel Traditional Pull
A HP118 HP118-100
3˝
Antique Pewter Braided Pull
A HP124 HP124-100
5 /˝
Satin Nickel Wire Cable Pull
A HP131 HP131-100
5 /˝
Satin Nickel Canoe Pull
A HP135 HP135-100
3 /˝
Satin Nickel Fusilli Pull
A HP139 HP139-100
3 /˝
White Fusilli Pull
A HP140 HP140-100
3 /˝
Brushed Satin Pewter French Tassel Pull
A HP151 HP151-100
3˝
Black Ceramic Insert Pull
A HP153 HP153-100
3˝
Tumbled Dark Gunmetal Mission Style Ringed Pendant Pull
A HP154 HP154-100
Oil Rubbed Bronze Cup Pull
A HP156 HP156-100
2 /˝ and 3˝
Satin Nickel Wavy Pull
A HP159 HP159-100
5 /˝
Ochre Finished Ceramic Totem Pull
A HP160 HP160-100
3 /˝
Dec
orat
ive
Enha
ncem
ents
A HP103-100
K23Hardware - Pulls
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . HP103-100
Chrome Traditional Pull
A HP163 HP163-100
3 /˝
Satin Nickel Traditional Pull
A HP164 HP164-100
3 /˝
Bright Brass Traditional Pull
A HP165 HP165-100
3 /˝
Black Nickel Traditional Pull
A HP166 HP166-100
3 /˝
Decorative Enhancem
ents
HP103
HP106
HP112
HP118
HP124
HP131
HP135
† Satin SuitcasePull
Satin Nickel RopePull
Satin Aluminim BoatCleat Transitional Pull
Satin Nickel TransitionalPull † Antique Pewter BraidedPull
Satin Nickel Wire Cable Pull
Satin Nickel CanoePull
Black Ceraminc InsertPullTumbled Dark GunmetalMission Style Ringed Pendant Pull† Oil Rubbed Bronze CupPull
Satin Nickel WavyPull
† Satin Nickel Fusilli Pull
† White FusilliPull
Brushed Satin Pewter French Tassel Pull
HP153
HP154
HP156
HP159
HP139
HP140
HP151
HP165
HP166
HP160
HP163
HP164
Bright Brass TraditionalPullBlack Nickel TraditionalPull
Ochre Finished CeramicTotem Pull
Chrome Traditional Pull
Satin Nickel TraditionalPull
† ADA compliant
3 25/32”
3 25/32”
3 25/32”
3”
5 1/32”
5 1/32”
3 25/32”
3 25/32”
3 25/32”
3”
3”
2 33/64”
2 33/64”or 3”
5 1/32”
3 25/32”
3 25/32”
3 25/32”
3 25/32”
3 25/32”
SKUDescription DescriptionSKUDescriptionDimensionsBetween Hole
Centers
DimensionsBetween Hole
Centers
DimensionsBetween Hole
Centers
SKU
Pull Dimensions
Dec
orat
ive
Enha
ncem
ents
K24 Decorative Enhancements
Notes
Replacement Parts
L1Touch Up Materials
Touch Up Materials
A CCK
Cabinet Care Kit
A CCK • One 8 oz. squeeze bottle of concentrated wood cleaner
• One 8 oz. squeeze bottle of cabinet/furniture polish and restorer
• Two 13” x 12” cleaning and polishing cloths• One 17” x 13” dusting cloth
Cabinet Care Kit
Polish Cleaner
Cabinet Cleaning and Polishing Cloths
A CCPC • 13” x 12” cleaning and polishing cloths
• 25 per carton• Drop ship program
Cabinet Dusting Cloths
A CDC • Treated to pick up and hold dust within cloth
• Six per carton• Drop ship program
17˝
13˝
Fill Stick
A FS FS-12
• Matching putty crayon• Available in all finishes• Offered individually or 12 of one kind per carton
Repl
acem
ent P
arts
L2 Touch Up Materials
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . CCK
Touch Up Kit
A TUK • Available in all finishes
• Used for final touch up and detailing• Kit includes Touch Up Pen (TP), Fill Stick (FS), a bottle of
touch up topcoat and a plastic storage case• Not available for Spring Valley Hickory or Sutton Cliffs
Hickory• One per carton
Touch Up Pen
A TP TP-12
• Felt tip marker with matching stain • Available in all finishes• Not available for Spring Valley Hickory or Sutton Cliffs
Hickory• Offered individually or 12 of one kind per carton
Touch Up Spray Can Primer
A TSCP TSCP-12
• Used as part of the process for final touch up of White, Cotton and Chiffon finishes only
• For use with Touch Up Spray Can Topcoat (TSCT)• 13 oz. aerosol spray can • Offered individually or 12 of one kind per carton• Drop ship program
Touch Up Spray Can Topcoat
A TSCT TSCT-12
• Touch up topcoat paint for White, Cotton or Chiffon finishes
• For use with Touch Up Spray Can Primer (TSCP)• 13 oz. aerosol spray can • Offered individually or 12 of one kind per carton• Drop ship program
Touch Up Quart
A Quart Stain QST Quart Paint QP Quart Glaze QGL Quart Clear Sealer/Topcoat QCST
• Matching stain, paint, glaze and clear sealer/topcoat• Available in quarts only• Direct ship program
Quart
Replacement Parts
L3Touch Up Materials
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . CCK
Stain, Glaze and Paint Direct Ship Information
Items Needed to Reproduce Glaze Finishes
Items Needed to Reproduce Accent Glaze Finishes
Amaretto with Java Glaze - Cherry Amaretto Stain - Dark Brown Glaze - Clear Sealer/Topcoat Chiffon with Desert Glaze - Chiffon Paint - Medium Brown Glaze - Clear Sealer/Topcoat Chiffon with Tuscan Glaze - Chiffon Paint - Light Gray Glaze - Clear Sealer/Topcoat Cider with Java Glaze - Cherry Cider Stain - Dark Brown Glaze - Clear Sealer/Topcoat Cotton with Tuscan Glaze - Cotton Paint - Light Gray Glaze - Clear Sealer/Topcoat Hazelnut with Java Glaze - Maple Hazelnut Stain - Dark Brown Glaze - Clear Sealer/Topcoat Natural with Java Glaze - Dark Brown Glaze - Clear Sealer/Topcoat Paprika with Ebony Glaze - Cherry Paprika Stain -Charcoal Glaze - Clear Sealer/Topcoat Sable with Ebony Glaze - Maple Sable Stain - Charcoal Glaze - Clear Sealer/Topcoat Toffee with Java Glaze - Maple Toffee Stain - Dark Brown Glaze - Clear Sealer/Topcoat
Chiffon with Desert Accent Glaze - Chiffon Paint - Medium Brown Glaze Marker - Clear Sealer/Topcoat Chiffon with Tuscan Accent Glaze - Chiffon Paint - Light Gray Glaze Marker - Clear Sealer/Topcoat Cotton with Tuscan Accent Glaze - Cotton Paint - Light Gray Glaze Marker - Clear Sealer/Topcoat Hazelnut with Java Accent Glaze - Hazelnut Stain - Sienna Glaze Marker - Clear Sealer/Topcoat Natural with Java Accent Glaze - Sienna (dark brown) Glaze Marker - Clear Sealer/Topcoat Sable with Ebony Accent Glaze - Maple Sable Stain - Charcoal (black) Glaze Marker - Clear Sealer/Topcoat Sedona with Ebony Accent Glaze - Maple Sedona Stain - Charcoal (black) Glaze Marker - Clear Sealer/Topcoat Toffee with Java Accent Glaze - Toffee Sable Stain - Sienna (dark brown) Glaze Marker - Clear Sealer/Topcoat
�is listing represents the matching stain, paint and glaze, as well as clear sealer/topcoat needed to reproduce our finishes.
Available in quarts only. �e stains are a “two-step” process, requiring first the application of the hand-wipe stain, followed by the application of the clear sealer/topcoat. Instructions and safety data sheets are packaged with each can of stain or clear sealer/topcoat.
Each stain has been developed for a specific wood specie, and is listed within the stain name, i.e., Cherry Cider. If a stain is applied to a wood specie other than it was originally formulated for the color can be expected to have a different appearance. For the color “Natural”, the sealer/topcoat provides the same results as our facilities.
For optimum in-field color matches, it is recommended that the clear sealer/topcoat be applied following stain application.
�ere is no warranty on stains or items stained outside our facilities.
Important Note:�e clear sealer/topcoat includes UV inhibitors. Not all sealers/topcoats are clear, and using a formula from another source could alter the appearance and color of the wood.
Repl
acem
ent P
arts
L4 Sales Doors
Sales Doors
A SLDO14.75X11.25
Door and Frame Assembly Sales Samples
A C ACCESSDFAVB12 Square only ACCESSDFAB15 Square only ACCESSDFAW1530 L Arch only
• Available in all door styles• Fits on carousels• Door and drawer front sizes vary depending on full or
partial overlay• ACCESSDFAB15 is the face frame/door/drawer front from
a B15 base cabinet• ACCESSDFAVB12 is the face frame/door/drawer front
from a VB12 vanity cabinet• ACCESSDFAW1530 is the face frame/door/drawer front
from a W1530 cabinet with an arch door style• One per carton
12˝
27˝
15˝
30˝
ACCESSDFAW1530L
15˝
30˝
ACCESSDFAB15ACCESSDFAVB12
Sales Door
A SLDO14.75X11.25 • Available in all door styles, species and finishes
• Includes door only• One per carton
11.25˝
14.75˝
Replacement Parts
L5Accessories
Accessories
A HTK-U
Edge Banding
A EB
• Used for finishing edges of panels• Available in all finishes• Roll is 25’ long, 15/16” wide and 14 mil thick• Melamine edge banding with pre-applied hot melt
adhesive• For Natural w/Java Glaze and Natural w/Java Accent, use
Maple Natural• For Sable with Ebony Glaze and Sable with Ebony Accent,
use Maple Sable• For Sedona with Ebony Accent, use Maple Sedona• For Toffee with Java Accent or Toffee with Java Glaze, use
Maple Toffee• One roll per carton
SoftAction™ Door Hardware
A SADO • Soft-closing technology provides smooth and silent
closure of door• One required per door; PC, U, VLC and UF cabinets
require two• Mounting hardware included• One per carton• Note: Requires field installation
Partial overlay spacer and screws
Hardware Template Kit Universal
A HTK-U • Handy drill jig for universal hardware drilling
• High-impact grey polycarbonate template with hardened steel drill bushings
• Adjustable for use with all drawers and doors• One per carton
Repl
acem
ent P
arts
L6 Replacement Parts
Replacement Parts
Construction Options and Modifications
A GDEUMFESAL18
3/4 Extension Side Mount Roller Guide Kit
A GDESM18KIT GDESM21KIT GDESM24KIT
• 75 pound capacity• White epoxy coated steel• Kit includes left and right guides and
mounting hardware• GDESM18KIT used on 18” deep cabinets• GDESM21KIT used on 21” deep cabinets• GDESM24KIT used on 24” deep cabinets• One kit per carton
3/4 Extension Side Mount Roller Guide Peninsula Base Kit
A GDESMPB24KIT • 75 pound capacity
• White epoxy coated steel• Kit includes left and right guides and
mounting hardware• Used on Peninsula Base cabinets• One kit per carton
3/4 Extension Side Mount Roller Guides
A Inner Left GDESMIL18 1 count GDESMIL18-10 10 count GDESMIL21 1 count GDESMIL21-10 10 count GDESMIL24 1 count GDESMIL24-10 10 count Inner Right GDESMIR18 1 count GDESMIR18-10 10 count GDESMIR21 1 count GDESMIR21-10 10 count GDESMIR24 1 count GDESMIR24-10 10 count
A Outer Left GDESMOL18 1 count GDESMOL18-10 10 count GDESMOL21 1 count GDESMOL21-10 10 count GDESMOL24 1 count GDESMOL24-10 10 count Outer Right GDESMOR18 1 count GDESMOR18-10 10 count GDESMOR21 1 count GDESMOR21-10 10 count GDESMOR24 1 count GDESMOR24-10 10 count
• 75 pound capacity• White epoxy coated steel• 18 deep used on 18” deep cabinets• 21 deep used on 21” deep cabinets• 24 deep used on 24” deep cabinets• Offered individually or quantities of 10
Inner left guide shown
Outer left guide shown
Replacement Parts
L7Replacement Parts
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . GDEUMFESAL18
Full Extension Side Mount Ball Bearing Guide Kit
A 21” Deep GDEFESMBB21KIT 24” Deep GDEFESMBB24KIT
• 75 pound capacity• Full extension guide, pulls out past the face frame• Kit includes left and right guides and mounting hardware• GDEFESMBB21KIT used on DFD cabinets in SST and PST
constructions• GDEFESMBB24KIT used on BSD cabinets with 2DF tray
option• One kit per carton
Full Extension Side Mount Ball Bearing Guides
A Inner Left GDEFESMBBIL21 1 count GDEFESMBBIL21-10 10 count GDEFESMBBIL24 1 count GDEFESMBBIL24-10 10 count Inner Right GDEFESMBBIR21 1 count GDEFESMBBIR21-10 10 count GDEFESMBBIR24 1 count GDEFESMBBIR24-10 10 count Outer GDEFESMBBO21 1 count GDEFESMBBO21-10 10 count GDEFESMBBO24 1 count GDEFESMBBO24-10 10 count
• 75 pound capacity• Full extension guide, pulls out past the face frame• 21 deep used on DFD cabinets in SST and PST
constructions• 24 deep used on BSD cabinets with 2DF tray option• Offered individually or quantities of 10
Inner right guide shown
Outer Right guide shown
Full Extension Under Mount SoftAction™ Guide Kit
A GDEUMFESA18KIT GDEUMFESA21KIT GDEUMFESA24KIT
• 75 pound capacity• Full extension guide, pulls out past the face frame• Integrated SoftAction™ closing mechanism• Kit includes left and right guides and mounting hardware• Used on cabinets in SDT, PST and ADT constructions• GDEUMFESA18KIT used on 18” deep cabinets• GDEUMFESA21KIT used on 21” deep cabinets• GDEUMFESA24KIT used on 24” deep cabinets• One kit per carton
Full Extension Under Mount Soft Action+™ Peninsula Base Guide Kit
A GDEUMFESAPB24KIT • 75 pound capacity
• Full extension guide, pulls out past the face frame• Integrated SoftAction™ closing mechanism• Used on cabinets in SDT, PST and ADT constructions• 18 deep used on 18” deep cabinets• 21 deep used on 21” deep cabinets• 24 deep used on 24” deep cabinets• One kit per carton
Repl
acem
ent P
arts
L8 Replacement Parts
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . GDEUMFESAL18
Full Extension Under Mount Soft Action+™ Guides
A Left GDEUMFESAL18 GDEUMFESAL21 GDEUMFESAL24 Right GDEUMFESAR18 GDEUMFESAR21 GDEUMFESAR24
• 75 pound capacity• Full extension guide, pulls out past the face frame• Integrated SoftAction™ closing mechanism• Used on cabinets in SDT, PST and ADT constructions• 18 deep used on 18” deep cabinets• 21 deep used on 21” deep cabinets• 24 deep used on 24” deep cabinets• One kit per carton
left guide shown
Full Extension Heavy Duty Under Mount Soft Action+™ Guide Set
A GDEUMFESAHD24SET • 75 pound capacity
• Full extension guide, pulls out past the face frame• Integrated SoftAction™ closing mechanism• Set includes left and right guides• Used on BPPS cabinets• One set per carton
Locking Device - Full Extension Heavy Duty Under Mount Soft Action+™ Guides
A LKDVUMFESAGDEHDL LKDVUMFESAGDEHDR
• LKDVUMFESAGDEHDL attaches under left front corner of drawer core
• LKDVUMFESAGDEHDR attaches under right front corner of drawer core
• Used on BPPS cabinets• One per carton
Locking Device - Full Extension Under Mount Soft Action+™ Guides
A LKDVUMFESAGDEL LKDVUMFESAGDER
• LKDVUMFESAGDEL attaches under left front corner of drawer core
• LKDVUMFESAGDER attaches under right front corner of drawer core
• Used on cabinets in SDT, PST and ADT constructions• One per carton
left shown
Right shown
Rear Mounting Bracket - 3/4 Extension Side Mount Roller Guides
A RMBSMGDE 1 count RMBSMGDE-25 25 count
• Attaches using the guide holes in the back of the cabinet• For use with 3/4 Extension Side Mount Roller Guides• Offered individually or quantities of 25
left shown
right shown
Replacement Parts
L9Replacement Parts
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . GDEUMFESAL18
Rear Mounting Bracket - 3/4 Extension Side Mount Roller Guides Peninsula Base
A RMBSMGDEPB 1 count RMBSMGDEPB-2 2 count
• Attaches to back frame of cabinet using a screw• For use with Peninsula Base cabinets with 3/4 Extension
Side Mount Roller Guides• Offered individually or quantities of 2
Rear Mounting Bracket - Full Extension Under Mount Soft Action+™ Guides
A RMBUMFESAGDE-2 • Attaches using the guide holes in the back of the cabinet
• Used on cabinets in SDT, PST and ADT constructions• Two per carton
Rear Mounting Bracket - Full Extension Under Mount Soft Action+™ Guides Peninsula Base
A RMBUMFESAGDEPB-2 • Attaches to back frame of cabinet using a screw
• Used on cabinets in SDT, PST and ADT constructions• Two per carton
Rear Mounting Bracket - Full Extension Under Mount Soft Action+™ Guides DKD
A RMBUMFESAGDEDKDSET • Attaches using the guide holes in the back of the cabinet
• Used on DKD and DKDT cabinets in SDT, PDT and ADT constructions
• Includes a left and right rear mounting bracket• One set per carton
Rear Mounting Bracket - Full Extension Side Mount Ball Bearing Guides
A RMBFESMBBGDE • Attaches using the guide holes in the back of the cabinet
• Used on DFD cabinets in SST and PST constructions• Used on BSD cabinets with 2DF tray option• One per carton
Repl
acem
ent P
arts
L10 Replacement Parts
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . GDEUMFESAL18
Rear Adjustment Adapter - Full Extension Heavy Duty Under Mount Soft Action+™ Guides
A RAAUMFESAGDEHDSET • Attaches using the guide holes in the back of the cabinet
• Used on BPPS cabinets• Includes a left and right rear adjustment adapter• One set per carton
170 Degree Hinge
A HIN170FRM-1CT 1 count HIN170FRM-10CT 10 count
• Nickel plated finish• Includes hinge and mounting plate• Used on Traditional and Full Overlay BCR, BCFS and
WEZR’s• Offered individually or quantities of 10
Bi-Fold Hinge
A HINBIFOLD-1CT 1 count HINBIFOLD-10CT 10 count
• Nickel plated finish• Includes hinge and mounting plate• Used on Traditional and Full Overlay BCR, BCFS and
WEZR’s• Offered individually or quantities of 10
Face Mount Hinge
A HINFM-1PR 1 pair HINFM-10PR 10 pairs
• Nickel plated finish• Used on Traditional and Full Overlay WMC and OCU
cabinets• Used on Traditional and Full Overlay White, Cotton and
Chiffon OCS cabinets• Offered as a pair or 10 pairs
Full Overlay 4 Way Hinge
A HINFOL4WY-1PR 1 pair HINFOL4WY-10PR 10 pairs
• Nickel plated finish• 4 way door adjustment• Includes hinges and mounting screws• Used on Full Overlay 39” and 42” high Wall glass/prepared
for glass cabinets• Offered as a pair or 10 pairs
Replacement Parts
L11Replacement Parts
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . GDEUMFESAL18
Full Overlay 6 Way Hinge
A HINFOL6WY-1PR 1 pair HINFOL6WY-10PR 10 pairs
• Nickel plated finish• 4 way door adjustment• Includes hinges and mounting screws• Used on Full Overlay cabinets• Offered as a pair or 10 pairs
Traditional Overlay 2 Way Hinge
A HINTOL2WY-1PR 1 pair HINTOL2WY-10PR 10 pairs
• Nickel plated finish• 2 way door adjustment• Includes hinges and mounting screws• Used on Traditional Overlay 39” and 42” high wall glass/
prepared for glass cabinets• Offered as a pair or 10 pairs
Medicine Cabinet Pack Hinge
A HINMCPK 1 count HINMCPK-10 10 count
• Nickel plated finish• Includes upper and lower hinge, bushings and mounting
screws• Used on MC and TVMC cabinets• Offered individually or quantities of 10
Traditional Overlay 6 Way Hinge
A HINTOL6WY-1PR 1 pair HINTOL6WY-10PR 10 pairs
• Nickel plated finish• 4 way door adjustment• Includes hinges and mounting screws• Used on Traditional Overlay cabinets• Offered as a pair or 10 pairs
Utility Tray Hinge
A HINTOST-1PR 1 pair • Nickel plated finish
• Includes left/right hinges and mounting screws• Used on Sink Base w/Utility Tray cabinets and Utility Tray
Kits• Offered as a pair
Repl
acem
ent P
arts
L12 Replacement Parts
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . GDEUMFESAL18
3/4” Shelf Clip
A SHCLP34 1 count SHCLP34-20 20 count SHCLP34-100 100 count
• Clear plastic locking clip• Offered individually or quantities of 20 and 100
3/4” Shelf Clip with Stop
A Left SHCLPLK34L 1 count SHCLPLK34L-20 20 count Right SHCLPLK34R 1 count SHCLPLK34R-20 20 count
• Clear plastic locking clip with front edge restraint• Used for base cabinets with Half Depth Shelf Option• Offered individually or quantities of 20
Left Clip Shown
Shelf Support Back Pack
A SHSUPBPK 1 count SHSUPBPK-10 10 count SHSUPBPK-100 100 count
• Clear plastic shelf support back• Includes 2 supports and 2 screws per pack• Used to support the back edge of shelf, attaches to back
of cabinet with a screw• Offered individually or quantities of 10 or 100
Shelf Support Center
A SHSUPC 1 count SHSUPC-10 10 count
• Clear plastic center shelf support• Used to support the front edge of shelf, insert into hole in
back of frame center stile• Offered individually or quantities of 10
Shelf Support Pack
A SHSUPPK 1 count SHSUPPK-25 25 count
• Clear plastic shelf support/center shelf support• Includes 5 supports and 2 center shelf support• Used in Book Case cabinets• Offered individually or quantities of 25
Replacement Parts
L13Replacement Parts
Q P O N M L K J I H SVL . RO . S . NANON . N . NNNN . SST . S . C . GDEUMFESAL18
Shelf Support Pack MG/PM - 24” and 30” High
A SHSUPPKMGD24/30 • Clear plastic shelf support
• Shelf supports are offset to allow shelves to line up with door mullions
• Includes 15 shelf supports per pack• Used in 24” and 30” high wall cabinets with the Mullion
Glass and Prepared for Mullion Glass options• One per carton
B
T
B
TB B
T
T T
B
Shelf Support Pack MG/PM - 36” High
A SHSUPPKMGD36 • Clear plastic shelf support
• Shelf supports are offset to allow shelves to line up with door mullions
• Includes 15 shelf supports per pack• Used in 36” high wall cabinets with the Mullion Glass and
Prepared for Mullion Glass options• One per carton
T
T
T
T T
T
TT
T
T
Shelf Support Pack MG/PM - 39” and 42” High
A SHSUPPKMGD39/42 • Clear plastic shelf support
• Shelf supports are offset to allow shelves to line up with door mullions
• Includes 20 shelf supports per pack• Used in 39” and 42” high wall cabinets with the Mullion
Glass and Prepared for Mullion Glass options• One per carton
T
T
T
T
TT
T
T
T
T
BB
B
B
B
T
T
T
T
T
Vent Clip Pack
A VNTCLPPK 1 count VNTCLPPK-25 25 count
• Used to attach false drawer fronts on sink base and select vanity cabinets
• Includes 2 clips, 2 post and mounting screws per pack• Offered individually or quantities of 25
Repl
acem
ent P
arts
L14 Replacement Parts
Replacement Parts
L15
This guide shows which cabinet a replacement door and drawer front is available and what sku should be used to order with. This section is divided into two parts.
I. Part Index This part lists all cabinets alphabetically by the nomenclature and tells you the corresponding replacement doors and drawer fronts used on that cabinet.
II. Sizes This part lists all replacement doors and drawer fronts by their nomenclature.
How to Use This Section
Accessory Non-Drilled Door Information (ANDO)
Accessory non-drilled doors are not prepared for hinges. Accessory non-drilled doors are shipped with pliable bumpers at-tached. Accessory non-drilled glass door, mullion glass and prairie doors are available on only certain sizes which are desig-nated with an * symbol.
Accessory non-drilled doors and drawer fronts are coded for easy reference. The prefix indicates door and usage. The first two digits indicate nominal width and the second two digits indicate nominal height.
Replacement Door and Drawer Front Information (RDO and RDF)
Replacement doors are prepared for hinges. Replacement doors and drawer fronts are shipped with pliable bumpers at-tached. Replacement glass door, mullion glass and prairie doors are available on only certain size cabinets which are desig-nated with an * symbol.
Replacement doors and drawer fronts are coded for easy reference. The prefix indicates door or drawer and usage. For re-placement doors the first two digits indicate nominal width and the second two digits indicate nominal height. For replace-ment drawer fronts the first two digits indicate nominal height and second two digits indicate nominal width.
Replacement Packaged Drawer Core Information (PKDC)
Replacement packaged drawer cores include the drawer core only. No guide hardware or attachment screws are included, but are available to order separately. Replacement packaged drawer cores are available in standard engineered wood con-struction (SST) and solid wood dovetail construction (SDT).
Replacement packaged drawer cores are coded for easy reference. The prefix indicates replacement packaged drawer core. The first part of the dimension (ex. 3.88) indicates nominal height, second dimension (ex. 14.00) indicates nominal width and the last dimension (ex. 21.69) indicates nominal length.
ANDO 18 30
Prefix Nominal Nominal code Width Height
RDO 18 STD
Prefix Nominal Nominal code Width Height
RDO 18 30
Prefix Nominal Nominal code Width Height
PKDC 3.88X14.00X21.69
Prefix Nomial Height
Nomial Width
Nomial Length
How to Use This Section
Repl
acem
ent P
arts
Pre
fix C
odes
L16
Accessory Non-Drilled Door specific prefix codes are as follows:
ANDOBBC36/39 Accessory non-drilled door for Base Blind Corner 36/39ANDOBCA24BFH Accessory non-drilled door for Base Corner Angle 24 Butt-Door Full HeightANDOBCR33 Accessory non-drilled door for Base Corner Revolving 33ANDOBCR36 Accessory non-drilled door for Base Corner Revolving 36ANDOMDEP Accessory non-drilled door for Matching Desk End PanelANDOMTEP1218 Accessory non-drilled door for Matching Tall End Panel 1284 top doorANDOMTEP12TALL Accessory non-drilled door for Matching Tall End Panel 12 wide tall bottom doorANDOMTEP21TALL Accessory non-drilled door for Matching Tall End Panel 21 wide tall bottom doorANDOSBC60-VCD/VSB6035 Accessory non-drilled door for Sink Base Combination 60 - Vanity Combination Drawer/Vanity Sink Base 6035ANDOSFA39 Accessory non-drilled door for Sink Front Angle 39ANDOSFA42 Accessory non-drilled door for Sink Front Angle 39ANDOUBCR36 Accessory non-drilled door for Base Corner Revolving 36ANDOVB6035FH Accessory non-drilled door for Vanity Base 6035 Full HeightANDOVB60FH Accessory non-drilled door for Vanity Base 60 Full HeightANDOVCD/VSB60 Accessory non-drilled door for Vanity Combination Drawer/Vanity Sink Base 60ANDOVSB6035-4D Accessory non-drilled door for Vanity Sink Base Double Bowl 6035 - 4DANDOVSB60-3D Accessory non-drilled door for Vanity Sink Base Double Bowl 60 - 3DANDOWBC24/27(xx) Accessory non-drilled door for Wall Blind Corner 24/27 (all heights)ANDOWEZR(xx) Accessory non-drilled door for Wall Easy Reach (all heights)
Replacement Door specific prefix codes are as follows:
RDOBBC36/39 Replacement door for Base Blind Corner 36/39 RDOBCA24BFH Replacement door for Base Corner Angle 24 Butt-Door Full Height RDOBCR33 Replacement door for Base Corner Revolving 33 RDOBCR36 Replacement door for Base Corner Revolving 36 RDOBLS Replacement door for Base Lazy Susan RDOSFA39 Replacement door for Sink Front Angle 39 RDOSFA42 Replacement door for Sink Front Angle 42 RDOUBCR36 Replacement door for Universal Access Base Corner Revolving 36 RDOUBLS Replacement door for Universal Access Base Lazy Susan RDOVB6035FH Replacement door for Vanity Base 6035 Full Height RDOVB60FH Replacement door for Vanity Base 60 Full Height RDOVCD/VSB60 Replacement door for Vanity Combination Drawer/Vanity Sink Base 60 RDOSBC60-VCD/ Replacement door for Sink Base Combina tion 60 - VSB6035 Vanity Combination Drawer/Vanity Sink Base 6035 RDOVSB6035-4D Replacement door for Vanity Sink Base Double Bowl 6035 - 4D RDOVSB60-3D Replacement door for Vanity Sink Base Double Bowl 60 - 3DRDOWBC24/27(xx) Replacement door for Wall Blind Corner 24/27 (all heights)RDOWEZR(xx) Replacement door for Wall Easy Reach (all heights)
Replacement Door suffix codes are as follows: BWBT Base Wastebasket Top Mount L Left hinged R Right hinged BL Butt door left hinged BR Butt door right hinged TALLL Tall door left hinged TALLR Tall door right hinged TALLB Tall door - butt door BGD Butt Door - Glass Door GD Glass Door BMG Butt Door - Mullion Glass LMG Left hinged - Mullion Glass RMG Right hinged - Mullion Glass PR Prairie Door BPR Butt Door - Prairie Door
ANDO Accessory Non-Drilled Door RDF Replacement Drawer Front RDO Replacement Door PKDC Replacement Packaged Drawer Core
Prefix Codes
Replacement Drawer Front suffix codes are as follows: DKD 3.500 or 4.125 front height STD 5.500 or 6.125 front height STDUT 5.500 or 6.125 front height with Utility Tray drilling DP1 9.000 or 9.750 front height DP2 10.375 or 11.188 front height DP3 10.750 front height BPPS 13.500 or 14.437 front height DFD 6.000 or 17.625 front height - Desk File Drawer
How to Use This Section
Traditional Overlay Full OverlayCabinet Qty Door Code Qty Door Code
Traditional Overlay Full OverlayCabinet Qty Door Code Qty Door Code
B12 1 RDF12STD 1 RDF12STD 1 RDO1224 1 RDO1224B1212FH 1 RDO1230 1 RDO1230B12FH 1 RDO1230 1 RDO1230B15 1 RDF15STD 1 RDF15STD 1 RDO1524 1 RDO1524B1512FH 1 RDO1530 1 RDO1530B15FH 1 RDO1530 1 RDO1530B18 1 RDF18STD 1 RDF18STD 1 RDO1824 1 RDO1824B1812FH 1 RDO1830 1 RDO1830B18FH 1 RDO1830 1 RDO1830B21 1 RDF21STD 1 RDF21STD 1 RDO2124 1 RDO2124B2112FH 1 RDO2130 1 RDO2130B21FH 1 RDO2130 1 RDO2130B24 1 RDF24STD 1 RDF24STD 1 RDO2424 1 RDO2424B2412BFH 2 RDO2430B 2 RDO2430BB2412FH 1 RDO2430 1 RDO2430B24B 1 RDF24STD 1 RDF24STD 2 RDO2424B 2 RDO2424BB24BFH 2 RDO2430B 2 RDO2430BB24FH 1 RDO2430 1 RDO2430B2712BFH 2 RDO2730B 2 RDO2730BB27B 1 RDF27STD 1 RDF27STD 2 RDO2724B 2 RDO2724BB27BFH 2 RDO2730B 2 RDO2730BB30 1 RDF30STD 1 RDF30STD 2 RDO1524 2 RDO1524B3012BFH 2 RDO3030B 2 RDO3030BB3012FH 2 RDO1530 2 RDO1530B30B 1 RDF30STD 1 RDF30STD 2 RDO3024B 2 RDO3024BB30BFH 2 RDO3030B 2 RDO3030BB30FH 2 RDO1530 2 RDO1530B33 1 RDF33STD 1 RDF33STD 2 RDO3324 2 RDO3324B33B 1 RDF33STD 1 RDF33STD 2 RDO3324B 2 RDO3324BB33BFH 2 RDO3330B 2 RDO3330BB33FH 2 RDO3330 2 RDO3330B36 1 RDF36STD 1 RDF36STD 2 RDO1824 2 RDO1824B36B 1 RDF36STD 1 RDF36STD 2 RDO3624B 2 RDO3624BB36BFH 2 RDO3630B 2 RDO3630BB36FH 2 RDO1830 2 RDO1830B39 1 RDF39STD 1 RDF39STD 2 RDO3924 2 RDO3924B39FH 2 RDO3930 2 RDO3930B42 2 RDF21STD 2 RDF21STD 2 RDO2124 2 RDO2124B42FH 2 RDO2130 2 RDO2130B45 2 RDF45STD 2 RDF45STD 2 RDO4524 2 RDO4524B45FH 2 RDO4530 2 RDO4530B48 2 RDF24STD 2 RDF24STD 2 RDO2424 2 RDO2424B48FH 2 RDO2430 2 RDO2430B54 3 RDF18STD 3 RDF18STD 3 RDO1824 3 RDO1824B9FH 1 RDO930 1 RDO930BAR36 1 RDO3330 1 RDO1530BBC36/39 BR or BL 1 RDFBBC36/39STD 1 RDFBBC36/39STD 1 RDOBBC36/39 1 RDOBBC36/39BBC39/42 BR or BL 1 RDF27/2STD 1 RDF27/2STD 1 RDO2724 1 RDO2724BBC42/45 BR or BL 1 RDF33/2STD 1 RDF33/2STD 1 RDO3324 1 RDO3324BBC45/48 BR or BL 1 RDFBBC45/48STD 1 RDFBBC45/48STD 1 RDO3924 1 RDO3924BBC48/51 BR or BL 1 RDF45STD 1 RDF45STD 1 RDO4524 1 RDO4524BCA24BFH 2 RDOBCA24BFH 2 RDOBCA24BFH
BCD24 DR or DL-4D 1 RDF24STD 1 RDF24STD 1 RDO1224 1 RDO1224 1 RDF12DP1 1 RDF12DP1 2 RDF12STD 2 RDF12STDBCD30 DR or DL-4D 1 RDF30STD 1 RDF30STD 1 RDO1524 1 RDO1524 1 RDF15DP1 1 RDF15DP1 2 RDF15STD 2 RDF15STDBCD36DR or DL-4D 1 RDF36STD 1 RDF36STD 1 RDO1824 1 RDO1824 1 RDF18DP1 1 RDF18DP1 2 RDF18STD 2 RDF18STDBCFS36 1 RDOBCR36 1 RDOBCR36BCR33 1 RDOBCR33 1 RDOBCR33BCR36 1 RDOBCR36 1 RDOBCR36BCR36WLS 1 RDOBCR36 1 RDOBCR36BD12-3D 2 RDF12DP2 1 RDF12STD 1 RDF12STD 2 RDF12DP2BD12-4D 3 RDF12STD 3 RDF12STD 1 RDF12DP1 1 RDF12DP1BD15-3D 1 RDF15STD 1 RDF15STD 2 RDF15DP2 2 RDF15DP2BD15-4D 3 RDF15STD 3 RDF15STD 1 RDF15DP1 1 RDF15DP1BD18-3D 1 RDF18STD 1 RDF18STD 2 RDF18DP2 2 RDF18DP2BD18-4D 3 RDF18STD 3 RDF18STD 1 RDF18DP1 1 RDF18DP1BD21-3D 1 RDF21STD 1 RDF21STD 2 RDF21DP2 2 RDF21DP2BD21-4D 3 RDF21STD 3 RDF21STD 1 RDF21DP1 1 RDF21DP1BD24-3D 1 RDF24STD 1 RDF24STD 2 RDF24DP2 2 RDF24DP2BD24-4D 3 RDF24STD 3 RDF24STD 1 RDF24DP1 1 RDF24DP1BD27-3D 1 RDF27STD 1 RDF27STD 2 RDF27DP2 2 RDF27DP2BD27-4D 3 RDF27STD 3 RDF27STD 1 RDF27DP1 1 RDF27DP1BD30-3D 1 RDF30STD 1 RDF30STD 2 RDF30DP2 2 RDF30DP2BD33-3D 1 RDF33STD 1 RDF33STD 2 RDF33DP2 2 RDF33DP2BD36-3D 1 RDF36STD 1 RDF36STD 2 RDF36DP2 2 RDF36DP2BEA12FH R or L 1 RDO3330 1 RDO3330BEC24FH 2 RDO1830 2 RDO1830BLS36 1 RDOBLS N/ABMC24 1 RDF24DP2 1 RDF24DP2BMC27 1 RDF27DP2 1 RDF27DP2BMC30 1 RDF30DP2 1 RDF30DP2BPO9 1 RDO930BPO 1 RDO930BPOBPPS27-2D 2 RDF27BPPS 2 RDF27BPPSBPPS30-2D 2 RDF30BPPS 2 RDF30BPPSBPPS33-2D 2 RDF33BPPS 2 RDF33BPPSBPPS36-2D 2 RDF36BPPS 2 RDF36BPPSBSD30B 1 RDF30STD 1 RDF30STD 2 RDO3024B 2 RDO3024BBSD36B 1 RDF36STD 1 RDF36STD 2 RDO3624B 2 RDO3624BBWBT15 1 RDF15STD 1 RDF15STD 1 RDO1524BWBT 1 RDO1524BWBTBWBT18 1 RDF18STD 1 RDF18STD 1 RDO1824BWBT 1 RDO1824BWBTDDO15 1 RDF15STD 1 RDF15STD 1 RDO1518 1 RDO1518DDO18 1 RDF18STD 1 RDF18STD 1 RDO1818 1 RDO1818DDO21 1 RDF21STD 1 RDF21STD 1 RDO2118 1 RDO2118DDO24 1 RDF24STD 1 RDF24STD 1 RDO2418 1 RDO2418DDR12 2 RDF12STD 2 RDF12STD 1 RDF12DP1 1 RDF12DP3DDR15 2 RDF15STD 2 RDF15STD 1 RDF15DP1 1 RDF15DP3
Replacement Parts
Door & Drawer Fronts - Part Index L17
L18
Traditional Overlay Full OverlayCabinet Qty Door Code Qty Door Code
Traditional Overlay Full OverlayCabinet Qty Door Code Qty Door Code
Repl
acem
ent P
arts
DDR18 2 RDF18STD 2 RDF18STD 1 RDF18DP1 1 RDF18DP3DDR21 2 RDF21STD 2 RDF21STD 1 RDF21DP1 1 RDF21DP3DDR24 2 RDF24STD 2 RDF24STD 1 RDF24DP1 1 RDF24DP3DFD15 1 RDF15DFD 1 RDF15DFD 1 RDF15STD 1 RDF15STDDFD18 1 RDF18DFD 1 RDF18DFD 1 RDF18STD 1 RDF18STDDFD21 1 RDF21DFD 1 RDF21DFD 1 RDF21STD 1 RDF21STDDFD24 1 RDF24DFD 1 RDF24DFD 1 RDF24STD 1 RDF24STDDKD24 1 RDF24DKD 1 RDF24DKDDKD30 1 RDF30DKD 1 RDF30DKDDKD36 1 RDF36DKD 1 RDF36DKDDKDT24 1 RDF18DKD 1 RDF18DKDDKDT30 1 RDF24DKD 1 RDF24DKDDKDT36 1 RDF30DKD 1 RDF30DKDDOS18 1 RDO1818 1 RDO1818DOS24B 2 RDO2418B 2 RDO2418BDSB30 2 RDO1521 2 RDO1521DSB33 2 RDO3321 2 RDO3321DSB36 2 RDO1821 2 RDO1821OCS2784B 2 RDO2718B 2 RDO2718B 2 RDO2724B 2 RDO2724BOCS2790B 2 RDO2724B 2 RDO2724BOCS2793B 2 RDO2727B 2 RDO2727B 2 RDO2724B 2 RDO2724BOCS2796B 2 RDO2730B 2 RDO2730B 2 RDO2724B 2 RDO2724BOCS3084 2 RDO1518 2 RDO1518 2 RDO1524 2 RDO1524OCS3084B 2 RDO3018B 2 RDO3018B 2 RDO3024B 2 RDO3024BOCS3090 2 RDO1524 2 RDO1524OCS3090B 2 RDO3024B 2 RDO3024BOCS3093B 2 RDO3027B 2 RDO3027B 2 RDO3024B 2 RDO3024BOCS3096 2 RDO1530 2 RDO1530 2 RDO1524 2 RDO1524OCS3096B 2 RDO3030B 2 RDO3030B 2 RDO3024B 2 RDO3024BOCS3384 2 RDO3318 2 RDO3318 2 RDO3324 2 RDO3324OCS3384B 2 RDO3318B 2 RDO3318B 2 RDO3324B 2 RDO3324BOCS3390 2 RDO3324 2 RDO3324OCS3390B 2 RDO3324B 2 RDO3324BOCS3393B 2 RDO3327B 2 RDO3327B 2 RDO3324B 2 RDO3324BOCS3396 2 RDO3330 2 RDO3330 2 RDO3324 2 RDO3324OCS3396B 2 RDO3330B 2 RDO3330B 2 RDO3324B 2 RDO3324BOCU2784B 1 RDF27STD 1 RDF27STD 2 RDO2718B 2 RDO2718BOCU2790B 1 RDF27STD 1 RDF27STD 2 RDO2724B 2 RDO2724BOCU2793B 1 RDF27STD 1 RDF27STD 2 RDO2727B 2 RDO2727BOCU2796B 1 RDF27STD 1 RDF27STD 2 RDO2730B 2 RDO2730BOCU3084 1 RDF30STD 1 RDF30STD 2 RDO1518 2 RDO1518OCU3084B 1 RDF30STD 1 RDF30STD 2 RDO3018B 2 RDO3018BOCU3090 1 RDF30STD 1 RDF30STD 2 RDO1524 2 RDO1524OCU3090B 1 RDF30STD 1 RDF30STD 2 RDO3024B 2 RDO3024BOCU3093B 1 RDF30STD 1 RDF30STD 2 RDO3027B 2 RDO3027BOCU3096 1 RDF30STD 1 RDF30STD 2 RDO1530 2 RDO1530
OCU3096B 1 RDF30STD 1 RDF30STD 2 RDO3030B 2 RDO3030BOCU3384 1 RDF33STD 1 RDF33STD 2 RDO3318 2 RDO3318OCU3384B 1 RDF33STD 1 RDF33STD 2 RDO3318B 2 RDO3318BOCU3390 1 RDF33STD 1 RDF33STD 2 RDO3324 2 RDO3324OCU3390B 1 RDF33STD 1 RDF33STD 2 RDO3324B 2 RDO3324BOCU3393B 1 RDF33STD 1 RDF33STD 2 RDO3327B 2 RDO3327BOCU3396 1 RDF33STD 1 RDF33STD 2 RDO3330 2 RDO3330OCU3396B 1 RDF33STD 1 RDF33STD 2 RDO3330B 2 RDO3330BODK27 1 RDF27STD 1 RDF27STDODK30 1 RDF30STD 1 RDF30STDODK33 1 RDF33STD 1 RDF33STDPB18 2 RDF18STD 2 RDF18STD 2 RDO1824 2 RDO1824PB21 2 RDF21STD 2 RDF21STD 2 RDO2124 2 RDO2124PB24 2 RDF24STD 2 RDF24STD 2 RDO2424 2 RDO2424PB24B 2 RDF24STD 2 RDF24STD 4 RDO2424B 4 RDO2424BPB27B 2 RDF27STD 2 RDF27STD 4 RDO2724B 4 RDO2724BPB30B 2 RDF30STD 2 RDF30STD 4 RDO3024B 4 RDO3024BPB30FDS 2 RDF30STD 2 RDF30STD 4 RDO1524 4 RDO1524PB36B 2 RDF36STD 2 RDF36STD 4 RDO3624B 4 RDO3624BPB36FDS 2 RDF36STD 2 RDF36STD 4 RDO1824 4 RDO1824PBBC24/27BFDS 1 RDF24STD 1 RDF24STD 2 RDO2424B 2 RDO2424BPBBC24/27FDS 1 RDF24STD 1 RDF24STD 1 RDO2424 1 RDO2424PC3684B 2 RDO3618B 2 RDO3618B 2 RDO36TALLB 2 RDO36TALLBPC3690B 2 RDO3624B 2 RDO3624B 2 RDO36TALLB 2 RDO36TALLBPC3693B 2 RDO3627B 2 RDO3627B 2 RDO36TALLB 2 RDO36TALLBPC3696B 2 RDO3630B 2 RDO3630B 2 RDO36TALLB 2 RDO36TALLBPW1824 2 RDO1824 2 RDO1824PW1830 2 RDO1830 2 RDO1830PW2124 2 RDO2124 2 RDO2124PW2130 2 RDO2130 2 RDO2130PW2418 2 RDO2418 2 RDO2418PW2418B 4 RDO2418B 4 RDO2418BPW2424 2 RDO2424 2 RDO2424PW2424B 4 RDO2424B 4 RDO2424BPW2430 2 RDO2430 2 RDO2430PW2430B 4 RDO2430B 4 RDO2430BPW3018 2 RDO1518 2 RDO1518PW3018B 4 RDO3018B 4 RDO3018BPW3024 4 RDO1524 4 RDO1524PW3024B 4 RDO3024B 4 RDO3024BPW3030 4 RDO1530 4 RDO1530PW3030B 4 RDO3030B 4 RDO3030BPW3618 4 RDO1818 4 RDO1818PW3618B 4 RDO3618B 4 RDO3618BPW3624 4 RDO1824 4 RDO1824PW3624B 4 RDO3624B N/APW3630 4 RDO1830 4 RDO1830PW3630B 4 RDO3630B 4 RDO3630BPWA2430 1 RDO3330 1 RDO1530 1 RDO4530 1 RDO4530PWBC24/2730 BR or BL 2 RDO1230 2 RDO1230 1 RDOWBC24/2730 1 RDOWBC24/2730
Traditional Overlay Full OverlayCabinet Qty Door Code Qty Door Code
Traditional Overlay Full OverlayCabinet Qty Door Code Qty Door Code
Replacement Parts
Door & Drawer Fronts - Part Index L19
RSF30B 1 RDF30STD 1 RDF30STD 2 RDO3024B 2 RDO3024BRSF33B 1 RDF33STD 1 RDF33STD 2 RDO3324B 2 RDO3324BRSF36B 1 RDF36STD 1 RDF36STD 2 RDO3624B 2 RDO3624BRSF42 2 RDF21STD 2 RDF21STD 2 RDO2124 2 RDO2124SB12 1 RDF12STD 1 RDF12STD 1 RDO1224 1 RDO1224SB15 1 RDF15STD 1 RDF15STD 1 RDO1524 1 RDO1524SB18 1 RDF18STD 1 RDF18STD 1 RDO1824 1 RDO1824SB21 1 RDF21STD 1 RDF21STD 1 RDO2124 1 RDO2124SB24 1 RDF24STD 1 RDF24STD 1 RDO2424 1 RDO2424SB24B 1 RDF24STD 1 RDF24STD 2 RDO2424B 2 RDO2424BSB24BFH 2 RDO2430B 2 RDO2430BSB24BUT 1 RDF24STDUT 1 RDF24STD 2 RDO2424B 2 RDO2424BSB24FH 1 RDO2430 1 RDO2430SB24UT 1 RDF24STDUT 1 RDF24STDUT 1 RDO2424 1 RDO2424SB2727B 1 RDF27STD 1 RDF27STD 2 RDO2724B 2 RDO2724BSB2727BUT 1 RDF27STDUT 1 RDF27STDUT 2 RDO2724B 2 RDO2724BSB27B 1 RDF27STD 1 RDF27STD 2 RDO2724B 2 RDO2724BSB27BFH 2 RDO2730B 2 RDO2730BSB27BUT 1 RDF27STDUT 1 RDF27STDUT 2 RDO2724B 2 RDO2724BSB30 1 RDF30STD 1 RDF30STD 2 RDO1524 2 RDO1524SB3027 1 RDF30STD 1 RDF30STD 2 RDO1524 2 RDO1524SB3027B 1 RDF30STD 1 RDF30STD 2 RDO3024B 2 RDO3024BSB3027BUT 1 RDF30STDUT 1 RDF30STDUT 2 RDO3024B 2 RDO3024BSB3027UT 1 RDF30STDUT 1 RDF30STDUT 2 RDO1524 2 RDO1524SB30B 1 RDF30STD 1 RDF30STD 2 RDO3024B 2 RDO3024BSB30B-CG 1 RDF30STD 1 RDF30STD 2 RDO3024B 2 RDO3024BSB30BFH 2 RDO3030B 2 RDO3030BSB30BUT 1 RDF30STDUT 1 RDF30STDUT 2 RDO3024B 2 RDO3024BSB30BUT-CG 1 RDF30STDUT 1 RDF30STDUT 2 RDO3024B 2 RDO3024BSB30FH 2 RDO1530 2 RDO1530SB30UT 1 RDF30STDUT 1 RDF30STDUT 2 RDO1524 2 RDO1524SB33 1 RDF33STD 1 RDF33STD 2 RDO3324 2 RDO3324SB3327 1 RDF33STD 1 RDF33STD 2 RDO3324 2 RDO3324SB3327B 1 RDF33STD 1 RDF33STD 2 RDO3324B 2 RDO3324BSB3327BUT 1 RDF33STDUT 1 RDF33STDUT 2 RDO3324B 2 RDO3324BSB3327UT 1 RDF33STDUT 1 RDF33STDUT 2 RDO3324 2 RDO3324SB33B 1 RDF33STD 1 RDF33STD 2 RDO3324B 2 RDO3324BSB33B-CG 1 RDF33STD 1 RDF33STD 2 RDO3324B 2 RDO3324BSB33BFH 2 RDO3330B 2 RDO3330BSB33BUT 1 RDF33STDUT 1 RDF33STDUT 2 RDO3324B 2 RDO3324BSB33BUT-CG 1 RDF33STDUT 1 RDF33STDUT 2 RDO3324B 2 RDO3324BSB33FH 2 RDO3330 2 RDO3330
SB33UT 1 RDF33STDUT 1 RDF33STDUT 2 RDO3324 2 RDO3324SB36 1 RDF36STD 1 RDF36STD 2 RDO1824 2 RDO1824SB3627 1 RDF36STD 1 RDF36STD 2 RDO1824 2 RDO1824SB3627B 1 RDF36STD 1 RDF36STD 2 RDO3624B 2 RDO3624BSB3627BUT 1 RDF36STDUT 1 RDF36STDUT 2 RDO3624B 2 RDO3624BSB3627UT 1 RDF36STDUT 1 RDF36STDUT 2 RDO1824 2 RDO1824SB36B 1 RDF36STD 1 RDF36STD 2 RDO3624B 2 RDO3624BSB36B-CG 1 RDF36STD 1 RDF36STD 2 RDO3624B 2 RDO3624BSB36BFH 2 RDO3630B 2 RDO3630BSB36BUT 1 RDF36STDUT 1 RDF36STDUT 2 RDO3624B 2 RDO3624BSB36BUT-CG 1 RDF36STDUT 2 RDO3624B 2 RDO3624B 1 RDF36STDUTSB36FH 2 RDO1830 2 RDO1830SB36UT 1 RDF36STDUT 1 RDF36STDUT 2 RDO1824 2 RDO1824SB39 1 RDF39STD 1 RDF39STD 2 RDO3924 2 RDO3924SB39FH 2 RDO3930 2 RDO3930SB39UT 1 RDF39STDUT 1 RDF39STDUT 2 RDO3924 2 RDO3924SB42 2 RDF21STD 2 RDF21STD 2 RDO2124 2 RDO2124SB4227 2 RDF21STD 2 RDF21STD 2 RDO2124 2 RDO2124SB4227UT 2 RDF21STDUT 2 RDF21STDUT 2 RDO2124 2 RDO2124SB42FH 2 RDO2130 2 RDO2130SB42UT 2 RDF21STDUT 2 RDF21STDUT 2 RDO2124 2 RDO2124SB48 2 RDF24STD 2 RDF24STD 2 RDO2424 2 RDO2424SB48FH 2 RDO2430 2 RDO2430SB48UT 2 RDF24STDUT 2 RDF24STDUT 2 RDO2424 2 RDO2424SBA36 1 RDF33/2STD 1 RDF33/2STD 1 RDO3324 1 RDO3324SBA42 1 RDFSBA/SFA42STD 1 RDFSBA/SFA42STD 1 RDOSFA42 1 RDOSFA42SF24 1 RDF24STD 1 RDF24STD 1 RDO2424 1 RDO2424SF24B 1 RDF24STD 1 RDF24STD 2 RDO2424B 2 RDO2424BSF24BFH 2 RDO2430B 2 RDO2430BSF24FH 1 RDO2430 1 RDO2430SF30 1 RDF30STD 1 RDF30STD 2 RDO1524 2 RDO1524SF30B 1 RDF30STD 1 RDF30STD 2 RDO3024B 2 RDO3024BSF30BFH 2 RDO3030B 2 RDO3030BSF30FH 2 RDO1530 2 RDO1530SF36 1 RDF36STD 1 RDF36STD 2 RDO1824 2 RDO1824SF36B 1 RDF36STD 1 RDF36STD 2 RDO3624B 2 RDO3624BSF36BFH 2 RDO3630B 2 RDO3630BSF36FH 2 RDO1830 2 RDO1830SFA36 1 RDF33/2STD 1 RDF15STD 1 RDO3324 1 RDO1524SFA36FH 1 RDO3330 1 RDO3330SFA39 1 RDFSFA39STD 1 RDFSFA39STD 1 RDOSFA39 1 RDOSFA39SFA42 1 RDFSBA/SFA42STD 1 RDFSBA/SFA42STD 1 RDOSFA42 1 RDOSFA42U1584 1 RDO1518 1 RDO1518 1 RDO15TALL 1 RDO15TALLU158424 1 RDO1518 1 RDO1518 1 RDO15TALL 1 RDO15TALL
Traditional Overlay Full OverlayCabinet Qty Door Code Qty Door Code
Traditional Overlay Full OverlayCabinet Qty Door Code Qty Door Code
Repl
acem
ent P
arts
Door & Drawer Fronts - Part IndexL20
U1590 1 RDO1524 1 RDO1524 1 RDO15TALL 1 RDO15TALLU159024 1 RDO1524 1 RDO1524 1 RDO15TALL 1 RDO15TALLU159324 1 RDO1527 1 RDO1527 1 RDO15TALL 1 RDO15TALLU1596 1 RDO1530 1 RDO1530 1 RDO15TALL 1 RDO15TALLU159624 1 RDO1530 1 RDO1530 1 RDO15TALL 1 RDO15TALLU1884 1 RDO1818 1 RDO1818 1 RDO18TALL 1 RDO18TALLU188424 1 RDO1818 1 RDO1818 1 RDO18TALL 1 RDO18TALLU1890 1 RDO1824 1 RDO1824 1 RDO18TALL 1 RDO18TALLU189024 1 RDO1824 1 RDO1824 1 RDO18TALL 1 RDO18TALLU189324 1 RDO1827 1 RDO1827 1 RDO18TALL 1 RDO18TALLU1896 1 RDO1830 1 RDO1830 1 RDO18TALL 1 RDO18TALLU189624 1 RDO1830 1 RDO1830 1 RDO18TALL 1 RDO18TALLU2484 1 RDO2418 1 RDO2418 1 RDO24TALL 1 RDO24TALLU248424 1 RDO2418 1 RDO2418 1 RDO24TALL 1 RDO24TALLU248424B 2 RDO2418B 2 RDO2418B 2 RDO24TALLB 2 RDO24TALLBU2484B 2 RDO2418B 2 RDO2418B 2 RDO24TALLB 2 RDO24TALLBU2490 1 RDO2424 1 RDO2424 1 RDO24TALL 1 RDO24TALLU249024 1 RDO2424 1 RDO2424 1 RDO24TALL 1 RDO24TALLU249024B 2 RDO2424B 2 RDO2424B 2 RDO24TALLB 2 RDO24TALLBU2490B 2 RDO2424B 2 RDO2424B 2 RDO24TALLB 2 RDO24TALLBU249324 1 RDO2427 1 RDO2427 1 RDO24TALL 1 RDO24TALLU249324B 2 RDO2427B 2 RDO2427B 2 RDO24TALLB 2 RDO24TALLBU2496 1 RDO2430 1 RDO2430 1 RDO24TALL 1 RDO24TALLU249624 1 RDO2430 1 RDO2430 1 RDO24TALL 1 RDO24TALLU249624B 2 RDO2430B 2 RDO2430B 2 RDO24TALLB 2 RDO24TALLBU2496B 2 RDO2430B 2 RDO2430B 2 RDO24TALLB 2 RDO24TALLBU308424B 2 RDO3018B 2 RDO3018B 2 RDO30TALLB 2 RDO30TALLBU3084B 2 RDO3018B 2 RDO3018B 2 RDO30TALLB 2 RDO30TALLBU309024B 2 RDO3024B 2 RDO3024B 2 RDO30TALLB 2 RDO30TALLBU3090B 2 RDO3024B 2 RDO3024B 2 RDO30TALLB 2 RDO30TALLBU309324B 2 RDO3027B 2 RDO3027B 2 RDO30TALLB 2 RDO30TALLBU309624B 2 RDO3030B 2 RDO3030B 2 RDO30TALLB 2 RDO30TALLBU3096B 2 RDO3030B 2 RDO3030B 2 RDO30TALLB 2 RDO30TALLBU368424B 2 RDO3618B 2 RDO3618B 2 RDO36TALLB 2 RDO36TALLBU3684B 2 RDO3618B 2 RDO3618B 2 RDO36TALLB 2 RDO36TALLBU369024B 2 RDO3624B 2 RDO3624B 2 RDO36TALLB 2 RDO36TALLBU3690B 2 RDO3624B 2 RDO3624B 2 RDO36TALLB 2 RDO36TALLBU369324B 2 RDO3627B 2 RDO3627B 2 RDO36TALLB 2 RDO36TALLB
U369624B 2 RDO3630B 2 RDO3630B 2 RDO36TALLB 2 RDO36TALLBU3696B 2 RDO3630B 2 RDO3630B 2 RDO36TALLB 2 RDO36TALLBUB12 1 RDF12STD 1 RDF12STD 1 RDO1221 1 RDO1221UB12FH 1 RDO1227 1 RDO1227UB15 1 RDF15STD 1 RDF15STD 1 RDO1521 1 RDO1521UB15FH 1 RDO1527 1 RDO1527UB18 1 RDF18STD 1 RDF18STD 1 RDO1821 1 RDO1821UB18FH 1 RDO1827 1 RDO1827UB21 1 RDF21STD 1 RDF21STD 1 RDO2121 1 RDO2121UB24 1 RDF24STD 1 RDF24STD 1 RDO2421 1 RDO2421UB24B 1 RDF24STD 1 RDF24STD 2 RDO2421B 2 RDO2421BUB24BFH 2 RDO2427B 2 RDO2427BUB24FH 1 RDO2427 1 RDO2427UB27B 1 RDF27STD 1 RDF27STD 2 RDO2721B 2 RDO2721BUB27BFH 2 RDO2727B 2 RDO2727BUB30B 1 RDF30STD 1 RDF30STD 2 RDO3021B 2 RDO3021BUB30BFH 2 RDO3027B 2 RDO3027BUB33B 1 RDF33STD 1 RDF33STD 2 RDO3321B 2 RDO3321BUB33BFH 2 RDO3327B 2 RDO3327BUB36B 1 RDF36STD 1 RDF36STD 2 RDO3621B 2 RDO3621BUB36BFH 2 RDO3627B 2 RDO3627BUB39FH 2 RDO3927 2 RDO3927UB42 2 RDF21STD 2 RDF21STD 2 RDO2121 2 RDO2121UB42FH 2 RDO2127 2 RDO2127UB45FH 2 RDO4527 2 RDO4527UB48FH 2 RDO2427 2 RDO2427UB9FH 1 RDO927 1 RDO927UBCR36 1 RDOUBCR36 1 RDOUBCR36UBD12-3D 1 RDF12STD 1 RDF12STD 2 RDF12DP1 2 RDF12DP1UBD15-3D 1 RDF15STD 1 RDF15STD 2 RDF15DP1 2 RDF15DP1UBD18-3D 1 RDF18STD 1 RDF18STD 2 RDF18DP1 2 RDF18DP1UBD21-3D 1 RDF21STD 1 RDF21STD 2 RDF21DP1 2 RDF21DP1UBD24-3D 1 RDF24STD 1 RDF24STD 2 RDF24DP1 2 RDF24DP1UBLS36 1 RDOUBLS N/AUBSF36BFH 2 RDO3627B 2 RDO3627BUBT24B 1 RDF24STDUBT 1 RDF24STDUBT 2 RDO2421B 2 RDO2421BUF1584 1 RDO1518 1 RDO1518 1 RDO15TALL 1 RDO15TALLUF1590 1 RDO1524 1 RDO1524 1 RDO15TALL 1 RDO15TALLUF1593 1 RDO1527 1 RDO1527 1 RDO15TALL 1 RDO15TALLUF1596 1 RDO1530 1 RDO1530 1 RDO15TALL 1 RDO15TALLUF1884 1 RDO1818 1 RDO1818 1 RDO18TALL 1 RDO18TALLUF1890 1 RDO1824 1 RDO1824 1 RDO18TALL 1 RDO18TALLUF1893 1 RDO1827 1 RDO1827 1 RDO18TALL 1 RDO18TALLUF1896 1 RDO1830 1 RDO1830 1 RDO18TALL 1 RDO18TALLUF2484 1 RDO2418 1 RDO2418 1 RDO24TALL 1 RDO24TALLUF2484B 2 RDO2418B 2 RDO2418B 2 RDO24TALLB 2 RDO24TALLB
Traditional Overlay Full OverlayCabinet Qty Door Code Qty Door Code
Traditional Overlay Full OverlayCabinet Qty Door Code Qty Door Code
Replacement Parts
Door & Drawer Fronts - Part Index L21
UF2490 1 RDO2424 1 RDO2424 1 RDO24TALL 1 RDO24TALLUF2490B 2 RDO2424B 2 RDO2424B 2 RDO24TALLB 2 RDO24TALLBUF2493 1 RDO2427 1 RDO2427 1 RDO24TALL 1 RDO24TALLUF2493B 2 RDO2427B 2 RDO2427B 2 RDO24TALLB 2 RDO24TALLBUF2496 1 RDO2430 1 RDO2430 1 RDO24TALL 1 RDO24TALLUF2496B 2 RDO2430B 2 RDO2430B 2 RDO24TALLB 2 RDO24TALLBURSF30B 2 RDO3024B 2 RDO3024BURSF33B 2 RDO3324B 2 RDO3324BURSF36B 2 RDO3624B 2 RDO3624BURSF42 2 RDO2124 2 RDO2124USFCK30BFH 2 RDO3027B 2 RDO3027BUSFCK33BFH 2 RDO3327B 2 RDO3327BUSFCK36BFH 2 RDO3627B 2 RDO3627BUSFCK42FH 2 RDO2127 2 RDO2127VB12 1 RDF12STD 1 RDF12STD 1 RDO1221 1 RDO1221VB1235 1 RDF12STD 1 RDF12STD 1 RDO1224 1 RDO1224VB15 1 RDF15STD 1 RDF15STD 1 RDO1521 1 RDO1521VB1535 1 RDF15STD 1 RDF15STD 1 RDO1524 1 RDO1524VB18 1 RDF18STD 1 RDF18STD 1 RDO1821 1 RDO1821VB1816FH 1 RDO1827 1 RDO1827VB1818FH 1 RDO1827 1 RDO1827VB1835 1 RDF18STD 1 RDF18STD 1 RDO1824 1 RDO1824VB1835FH 1 RDO1830 1 RDO1830VB18FH 1 RDO1827 1 RDO1827VB21 1 RDF21STD 1 RDF21STD 1 RDO2121 1 RDO2121VB2118FH 1 RDO2127 1 RDO2127VB2135 1 RDF21STD 1 RDF21STD 1 RDO2124 1 RDO2124VB2135FH 1 RDO2130 1 RDO2130VB21FH 1 RDO2127 1 RDO2127VB24 1 RDF24STD 1 RDF24STD 1 RDO2421 1 RDO2421VB2418BFH 2 RDO2421B 2 RDO2421BVB2418FH 1 RDO1227 1 RDO1227VB2435 1 RDF24STD 1 RDF24STD 1 RDO2424 1 RDO2424VB243518BFH 2 RDO2430B 2 RDO2430BVB243518SFH 1 RDO2430 1 RDO2430VB2435B 1 RDF24STD 1 RDF24STD 2 RDO2424B 2 RDO2424BVB2435BFH 2 RDO2430B 2 RDO2430BVB2435SFH 1 RDO2430 1 RDO2430VB24B 1 RDF24STD 1 RDF24STD 2 RDO2421B 2 RDO2421BVB24BFH 2 RDO2427B 2 RDO2427BVB24FH 1 RDO1227 1 RDO1227VB24SFH 1 RDO2427 1 RDO2427VB2718BFH 2 RDO2727B 2 RDO2727BVB273518BFH 2 RDO2730B 2 RDO2730BVB2735BFH 2 RDO2730B 2 RDO2730BVB27BFH 2 RDO2727B 2 RDO2727BVB3018BFH 2 RDO3027B 2 RDO3027BVB3018FH 2 RDO1527 2 RDO1527VB303518BFH 2 RDO3030B 2 RDO3030BVB303518FH 2 RDO1530 2 RDO1530VB3035BFH 2 RDO3030B 2 RDO3030BVB3035FH 2 RDO1530 2 RDO1530VB30BFH 2 RDO3027B 2 RDO3027BVB30FH 2 RDO1527 2 RDO1527VB3318BFH 2 RDO3327B 2 RDO3327BVB3318FH 2 RDO3327 2 RDO3327VB333518BFH 2 RDO3330B 2 RDO3330B
VB3335BFH 2 RDO3330B 2 RDO3330BVB3335FH 2 RDO3330 2 RDO3330VB33BFH 2 RDO3327B 2 RDO3327BVB33FH 2 RDO3327 2 RDO3327VB3618BFH 2 RDO3627B 2 RDO3627BVB3618FH 2 RDO1827 2 RDO1827VB363518BFH 2 RDO3630B 2 RDO3630BVB363518FH 2 RDO1830 2 RDO1830VB3635BFH 2 RDO3630B 2 RDO3630BVB3635FH 2 RDO1830 2 RDO1830VB36BFH 2 RDO3627B 2 RDO3627BVB36FH 2 RDO1827 2 RDO1827VB3935FH 2 RDO3930 2 RDO3930VB39FH 2 RDO3927 2 RDO3927VB4218FH 2 RDO2127 2 RDO2127VB4235FH 2 RDO2130 2 RDO2130VB42FH 2 RDO2127 2 RDO2127VB4818FH 2 RDO1527 2 RDO1527 1 RDO1827 1 RDO1827VB4835FH 2 RDO1530 2 RDO1530 1 RDO1830 1 RDO1830VB48FH 2 RDO1527 2 RDO1527 1 RDO1827 1 RDO1827VB5418FH 3 RDO1827 3 RDO1827VB5435FH 3 RDO1830 3 RDO1830VB54FH 3 RDO1827 3 RDO1827VB6018FH 2 RDOVB60FH 2 RDOVB60FH 2 RDO1527 2 RDO1527VB6035FH 2 RDOVB6035FH 2 RDOVB6035FH 2 RDO1530 2 RDO1530VB60FH 2 RDOVB60FH 2 RDOVB60FH 2 RDO1527 2 RDO1527VCD24 DR or DL 1 RDF24STD 1 RDF24STD 1 RDO1221 1 RDO1221 2 RDF12DP1 2 RDF12DP1VCD2418 DR or DL 1 RDF24STD 1 RDF24STD 1 RDO1221 1 RDO1221 2 RDF12DP1 2 RDF12DP1VCD2435 DR or DL 1 RDF24STD 1 RDF24STD 1 RDO1224 1 RDO1224 2 RDF12DP1 2 RDF12DP1 1 RDF12STD 1 RDF12STDVCD30 DR or DL 1 RDF30STD 1 RDF30STD 1 RDO1521 1 RDO1521 2 RDF15DP1 2 RDF15DP1VCD3018 DR or DL 1 RDF30STD 1 RDF30STD 1 RDO1521 1 RDO1521 2 RDF15DP1 2 RDF15DP1VCD3035 DR or DL 1 RDF30STD 1 RDF30STD 1 RDO1524 1 RDO1524 1 RDF15DP1 1 RDF15DP1 2 RDF15STD 2 RDF15STDVCD36 DR or DL 1 RDF36STD 1 RDF36STD 1 RDO1821 1 RDO1821 2 RDF18DP1 2 RDF18DP1VCD3618 DR or DL 1 RDF36STD 1 RDF36STD 1 RDO1821 1 RDO1821 2 RDF18DP1 2 RDF18DP1VCD3635 DR or DL 1 RDF36STD 1 RDF36STD 1 RDO1824 1 RDO1824 1 RDF18DP1 1 RDF18DP1 2 RDF18STD 2 RDF18STDVCD42 1 RDF18STD 1 RDF18STD 1 RDO1821 1 RDO1821 4 RDF12DP1 4 RDF12DP1 2 RDF12STD 2 RDF12STDVCD4218 1 RDF18STD 1 RDF18STD 1 RDO1821 1 RDO1821 4 RDF12DP1 4 RDF12DP1 2 RDF12STD 2 RDF12STDVCD4235 1 RDF18STD 1 RDF18STD 1 RDO1824 1 RDO1824 2 RDF12DP1 2 RDF12DP1 6 RDF12STD 6 RDF12STD
L22
Traditional Overlay Full OverlayCabinet Qty Door Code Qty Door Code
Traditional Overlay Full OverlayCabinet Qty Door Code Qty Door Code
Repl
acem
ent P
arts
VCD48 1 RDF18STD 1 RDF18STD 1 RDO1821 1 RDO1821 4 RDF15DP1 4 RDF15DP1 2 RDF15STD 2 RDF15STDVCD4818 1 RDF18STD 1 RDF18STD 1 RDO1821 1 RDO1821 4 RDF15DP1 4 RDF15DP1 2 RDF15STD 2 RDF15STDVCD4835 1 RDF18STD 1 RDF18STD 1 RDO1824 1 RDO1824 2 RDF15DP1 2 RDF15DP1 6 RDF15STD 6 RDF15STDVCD60 1 RDFVCD/VSB60-2DSTD 1 RDFVCD/VSB60-2DSTD 2 RDOVCD/VSB60 2 RDOVCD/VSB60 4 RDF15DP1 4 RDF15DP1 2 RDF15STD 2 RDF15STDVCD6018 1 RDFVCD/VSB60-2DSTD 1 RDFVCD/VSB60-2DSTD 2 RDOVCD/VSB60 2 RDOVCD/VSB60 4 RDF15DP1 4 RDF15DP1 2 RDF15STD 2 RDF15STDVCD6035 1 RDFVCD/VSB60-2DSTD 1 RDFVCD/VSB60-2DSTD 2 RDOSBC60-VCD/VSB6035 2 RDOSBC60-VCD VSB6035 2 RDF15DP1 2 RDF15DP1 6 RDF15STD 6 RDF15STDVD12-3D 1 RDF12STD 1 RDF12STD 2 RDF12DP1 2 RDF12DP1VD1218-3D 1 RDF12STD 1 RDF12STD 2 RDF12DP1 2 RDF12DP1VD1235-3D 1 RDF12STD 1 RDF12STD 2 RDF12DP2 2 RDF12DP2VD1235-4D 3 RDF12STD 3 RDF12STD 1 RDF12DP1 1 RDF12DP1VD123518-4D 3 RDF12STD 3 RDF12STD 1 RDF12DP1 1 RDF12DP1VD15-3D 1 RDF15STD 1 RDF15STD 2 RDF15DP1 2 RDF15DP1VD1518-3D 1 RDF15STD 1 RDF15STD 2 RDF15DP1 2 RDF15DP1VD1535-3D 1 RDF15STD 1 RDF15STD 2 RDF15DP2 2 RDF15DP2VD1535-4D 3 RDF15STD 3 RDF15STD 1 RDF15DP1 1 RDF15DP1VD153518-4D 3 RDF15STD 3 RDF15STD 1 RDF15DP1 1 RDF15DP1VD18-3D 1 RDF18STD 1 RDF18STD 2 RDF18DP1 2 RDF18DP1VD1818-3D 1 RDF18STD 1 RDF18STD 2 RDF18DP1 2 RDF18DP1VD1835-3D 1 RDF18STD 1 RDF18STD 2 RDF18DP2 2 RDF18DP2VD1835-4D 3 RDF18STD 3 RDF18STD 1 RDF18DP1 1 RDF18DP1VD183518-4D 3 RDF18STD 3 RDF18STD 1 RDF18DP1 1 RDF18DP1VD21-3D 1 RDF21STD 1 RDF21STD 2 RDF21DP1 2 RDF21DP1VD2118-3D 1 RDF21STD 1 RDF21STD 2 RDF21DP1 2 RDF21DP1VD2135-3D 1 RDF21STD 1 RDF21STD 2 RDF21DP2 2 RDF21DP2VD2135-4D 3 RDF21STD 3 RDF21STD 1 RDF21DP1 1 RDF21DP1VD24-3D 1 RDF24STD 1 RDF24STD 2 RDF24DP1 2 RDF24DP1VD2418-3D 1 RDF24STD 1 RDF24STD 2 RDF24DP1 2 RDF24DP1VD2435-3D 1 RDF24STD 1 RDF24STD 2 RDF24DP2 2 RDF24DP2VD2435-4D 3 RDF24STD 3 RDF24STD 1 RDF24DP1 1 RDF24DP1VLC1584 1 RDO1518 1 RDO1518 1 RDO15TALL 1 RDO15TALLVLC1590 1 RDO1524 1 RDO1524 1 RDO15TALL 1 RDO15TALLVLC1596 1 RDO1530 1 RDO1530 1 RDO15TALL 1 RDO15TALLVLC1848 1 RDO1848 1 RDO1848
VLC1884 1 RDO1818 1 RDO1818 1 RDO18TALL 1 RDO18TALLVLC1890 1 RDO1824 1 RDO1824 1 RDO18TALL 1 RDO18TALLVLC1896 1 RDO1830 1 RDO1830 1 RDO18TALL 1 RDO18TALLVLC2484 1 RDO2418 1 RDO2418 1 RDO24TALL 1 RDO24TALLVLC2484B 2 RDO2418B 2 RDO2418B 2 RDO24TALLB 2 RDO24TALLBVLC2490 1 RDO2424 1 RDO2424 1 RDO24TALL 1 RDO24TALLVLC2490B 2 RDO2424B 2 RDO2424B 2 RDO24TALLB 2 RDO24TALLBVLC2496 1 RDO2430 1 RDO2430 1 RDO24TALL 1 RDO24TALLVLC2496B 2 RDO2430B 2 RDO2430B 2 RDO24TALLB 2 RDO24TALLBVSB2435B 1 RDF24STD 1 RDF24STD 2 RDO2424B 2 RDO2424BVSB24B 1 RDF24STD 1 RDF24STD 2 RDO2421B 2 RDO2421BVSB2735B 1 RDF27STD 1 RDF27STD 2 RDO2724B 2 RDO2724BVSB27B 1 RDF27STD 1 RDF27STD 2 RDO2721B 2 RDO2721BVSB3035B 1 RDF30STD 1 RDF30STD 2 RDO3024B 2 RDO3024BVSB30B 1 RDF30STD 1 RDF30STD 2 RDO3021B 2 RDO3021BVSB3335B 1 RDF33STD 1 RDF33STD 2 RDO3324B 2 RDO3324BVSB33B 1 RDF33STD 1 RDF33STD 2 RDO3321B 2 RDO3321BVSB36-2D 3 RDF12STD 3 RDF12STD 2 RDO1821 2 RDO1821VSB3635-2D 3 RDF12STD 3 RDF12STD 2 RDO1824 2 RDO1824VSB3635B 1 RDF36STD 1 RDF36STD 2 RDO3624B 2 RDO3624BVSB36B 1 RDF36STD 1 RDF36STD 2 RDO3621B 2 RDO3621BVSB39 1 RDF39STD 1 RDF39STD 2 RDO3921 2 RDO3921VSB3935 1 RDF39STD 1 RDF39STD 2 RDO3924 2 RDO3924VSB42 2 RDF21STD 2 RDF21STD 2 RDO2121 2 RDO2121VSB42-2D 2 RDF12STD 2 RDF12STD 2 RDO1221 2 RDO1221 1 RDF18STD 1 RDF18STD 1 RDO1821 1 RDO1821VSB4235 2 RDF21STD 2 RDF21STD 2 RDO2124 2 RDO2124VSB4235-2D 2 RDF12STD 2 RDF12STD 2 RDO1224 2 RDO1224 1 RDF18STD 1 RDF18STD 1 RDO1824 1 RDO1824VSB48-2D 2 RDF15STD 2 RDF15STD 2 RDO1521 2 RDO1521 1 RDF18STD 1 RDF18STD 1 RDO1821 1 RDO1821VSB4835-2D 2 RDF15STD 2 RDF15STD 2 RDO1524 2 RDO1524 1 RDF18STD 1 RDF18STD 1 RDO1824 1 RDO1824VSB54-2D 3 RDF18STD 3 RDF18STD 3 RDO1821 3 RDO1821VSB54-3D 2 RDF21STD 2 RDF21STD 3 RDO2121 3 RDO2121 2 RDF12DP1 2 RDF12DP1 1 RDF12STD 1 RDF12STDVSB5435-2D 3 RDF18STD 3 RDF18STD 3 RDO1824 3 RDO1824VSB5435-4D 2 RDF21STD 2 RDF21STD 3 RDO2124 3 RDO2124 1 RDF12DP1 1 RDF12DP1 3 RDF12STD 3 RDF12STD
Traditional Overlay Full OverlayCabinet Qty Door Code Qty Door Code
Traditional Overlay Full OverlayCabinet Qty Door Code Qty Door Code
Replacement Parts
Door & Drawer Fronts - Part Index L23
VSB60-2D 2 RDF15STD 2 RDF15STD 2 RDOVCD/VSB60 2 RDOVCD/VSB60 1 RDFVCD/VSB60-2DSTD 1 RDFVCD/VSB60-2DSTD 2 RDO1521 2 RDO1521VSB60-3D 2 RDOVSB60-3D 2 RDOVSB60-3D 2 RDFVSB60-3DSTD 2 RDFVSB60-3DSTD 2 RDF18DP1 2 RDF18DP1 1 RDF18STD 1 RDF18STDVSB6035-2D 2 RDF15STD 2 RDF15STD 2 RDOSBC60-VCD/VSB6035 2 RDOSBC60-VCD VSB6035 1 RDFVCD/VSB60-2DSTD 1 RDFVCD/VSB60-2DSTD 2 RDO1524 2 RDO1524VSB6035-4D 2 RDOVSB6035-4D 2 RDOVSB6035-4D 2 RDFVSB60-3DSTD 2 RDFVSB60-3DSTD 1 RDF18DP1 1 RDF18DP1 3 RDF18STD 3 RDF18STDVW1530 1 RDO1530 1 RDO1530VWB2430 2 RDO1224 2 RDO1224VWB2430B 2 RDO2424B 2 RDO2424BVWB2648 2 RDO1227 2 RDO1227W1224 1 RDO1224 1 RDO1224W1230 1 RDO1230 1 RDO1230W1236 1 RDO1236 1 RDO1236W1239 1 RDO1239 1 RDO1239W1242 1 RDO1242 1 RDO1242W1524 1 RDO1524 1 RDO1524W1530 1 RDO1530 1 RDO1530W1536 1 RDO1536 1 RDO1536W1539 1 RDO1539 1 RDO1539W1542 1 RDO1542 1 RDO1542W1824 1 RDO1824 1 RDO1824W1830 1 RDO1830 1 RDO1830W1836 1 RDO1836 1 RDO1836W1839 1 RDO1839 1 RDO1839W1842 1 RDO1842 1 RDO1842W2124 1 RDO2124 1 RDO2124W2130 1 RDO2130 1 RDO2130W2136 1 RDO2136 1 RDO2136W2139 1 RDO2139 1 RDO2139W2142 1 RDO2142 1 RDO2142W2418 1 RDO2418 1 RDO2418W2418B 2 RDO2418B 2 RDO2418BW2424 1 RDO2424 1 RDO2424W2424B 2 RDO2424B 2 RDO2424BW2430 1 RDO2430 1 RDO2430W2430B 2 RDO2430B 2 RDO2430BW2436 1 RDO2436 1 RDO2436W2436B 2 RDO2436B 2 RDO2436BW2439 1 RDO2439 1 RDO2439W2439B 2 RDO2439B 2 RDO2439BW2442 1 RDO2442 1 RDO2442W2442B 2 RDO2442B 2 RDO2442BW2712B 2 RDO2712B 2 RDO2712BW2715B 2 RDO2715B 2 RDO2715BW2718B 2 RDO2718B 2 RDO2718BW2724B 2 RDO2724B 2 RDO2724BW2730B 2 RDO2730B 2 RDO2730BW2736B 2 RDO2736B 2 RDO2736BW2739B 2 RDO2739B 2 RDO2739BW2742B 2 RDO2742B 2 RDO2742BW3012 2 RDO1512 2 RDO1512W3012B 2 RDO3012B 2 RDO3012BW3015 2 RDO1515 2 RDO1515W3015B 2 RDO3015B 2 RDO3015BW3018 2 RDO1518 2 RDO1518W3018B 2 RDO3018B 2 RDO3018BW3021 2 RDO1521 2 RDO1521W3021B 2 RDO3021B 2 RDO3021BW3024 2 RDO1524 2 RDO1524W3024B 2 RDO3024B 2 RDO3024BW3027 2 RDO1527 2 RDO1527W3027B 2 RDO3027B 2 RDO3027BW3030 2 RDO1530 2 RDO1530W3030B 2 RDO3030B 2 RDO3030BW3036 2 RDO1536 2 RDO1536
W3036B 2 RDO3036B 2 RDO3036BW3039B 2 RDO3039B 2 RDO3039BW3042 2 RDO1542 2 RDO1542W3042B 2 RDO3042B 2 RDO3042BW3312 2 RDO3312 2 RDO3312W3312B 2 RDO3312B 2 RDO3312BW3315 2 RDO3315 2 RDO3315W3315B 2 RDO3315B 2 RDO3315BW3318 2 RDO3318 2 RDO3318W3318B 2 RDO3318B 2 RDO3318BW3321 2 RDO3321 2 RDO3321W3321B 2 RDO3321B 2 RDO3321BW3324 2 RDO3324 2 RDO3324W3324B 2 RDO3324B 2 RDO3324BW3327 2 RDO3327 2 RDO3327W3327B 2 RDO3327B 2 RDO3327BW3330 2 RDO3330 2 RDO3330W3330B 2 RDO3330B 2 RDO3330BW3336 2 RDO3336 2 RDO3336W3336B 2 RDO3336B 2 RDO3336BW3339B 2 RDO3339B 2 RDO3339BW3342 2 RDO3342 2 RDO3342W3342B 2 RDO3342B 2 RDO3342BW3612 2 RDO1812 2 RDO1812W3612B 2 RDO3612B 2 RDO3612BW3615 2 RDO1815 2 RDO1815W3615B 2 RDO3615B 2 RDO3615BW3618 2 RDO1818 2 RDO1818W3618B 2 RDO3618B 2 RDO3618BW3621 2 RDO1821 2 RDO1821W3621B 2 RDO3621B 2 RDO3621BW3624 2 RDO1824 2 RDO1824W3624B 2 RDO3624B 2 RDO3624BW3627 2 RDO1827 2 RDO1827W3627B 2 RDO3627B 2 RDO3627BW3630 2 RDO1830 2 RDO1830W3630B 2 RDO3630B 2 RDO3630BW3636 2 RDO1836 2 RDO1836W3636B 2 RDO3636B 2 RDO3636BW3639B 2 RDO3639B 2 RDO3639BW3642 2 RDO1842 2 RDO1842W3642B 2 RDO3642B 2 RDO3642BW3912 2 RDO3912 2 RDO3912W3915 2 RDO3915 2 RDO3915W3918 2 RDO3918 2 RDO3918W3921 2 RDO3921 2 RDO3921W3924 2 RDO3924 2 RDO3924W3927 2 RDO3927 2 RDO3927W3930 2 RDO3930 2 RDO3930W3936 2 RDO3936 2 RDO3936W3939 2 RDO3939 2 RDO3939W3942 2 RDO3942 2 RDO3942W4212 2 RDO2112 2 RDO2112W4215 2 RDO2115 2 RDO2115W4218 2 RDO2118 2 RDO2118W4221 2 RDO2121 2 RDO2121W4224 2 RDO2124 2 RDO2124W4227 2 RDO2127 2 RDO2127W4230 2 RDO2130 2 RDO2130W4236 2 RDO2136 2 RDO2136W4239 2 RDO2139 2 RDO2139W4242 2 RDO2142 2 RDO2142W4512 2 RDO4512 2 RDO4512W4515 2 RDO4515 2 RDO4515W4518 2 RDO4518 2 RDO4518W4524 2 RDO4524 2 RDO4524W4530 2 RDO4530 2 RDO4530W4812 2 RDO2412 2 RDO2412W4815 2 RDO2415 2 RDO2415W4818 2 RDO2418 2 RDO2418W4824 2 RDO2424 2 RDO2424W4830 2 RDO2430 2 RDO2430W930 1 RDO930 1 RDO930
Traditional Overlay Full OverlayCabinet Qty Door Code Qty Door Code
Traditional Overlay Full OverlayCabinet Qty Door Code Qty Door Code
Repl
acem
ent P
arts
Door & Drawer Fronts - Part IndexL24
W936 1 RDO936 1 RDO936W939 1 RDO939 1 RDO939W942 1 RDO942 1 RDO942WA2430 1 RDO3330 1 RDO1530WA2436 1 RDO3336 1 RDO1536WA2439 1 RDO3339 1 RDO1539WA2442 1 RDO3342 1 RDO1542WA2730 1 RDO3330 1 RDO1530WA2736 1 RDO3336 1 RDO1536WA2739 1 RDO3339 1 RDO1539WA2742 1 RDO3342 1 RDO1542WBC24/2730 BR or BL 1 RDOWBC24/2730 1 RDOWBC24/2730WBC24/2736 BR or BL 1 RDOWBC24/2736 1 RDOWBC24/2736WBC24/2739 BR or BL 1 RDOWBC24/2739 1 RDOWBC24/2739WBC24/2742 BR or BL 1 RDOWBC24/2742 1 RDOWBC24/2742WBC27/3024 BR or BL 1 RDO2724 1 RDO2724WBC27/3030 BR or BL 1 RDO2730 1 RDO2730WBC27/3036 BR or BL 1 RDO2736 1 RDO2736WBC27/3039 BR or BL 1 RDO2739 1 RDO2739WBC27/3042 BR or BL 1 RDO2742 1 RDO2742WBC30/3330 BR or BL 1 RDO3330 1 RDO3330WBC30/3336 BR or BL 1 RDO3336 1 RDO3336WBC30/3339 BR or BL 1 RDO3339 1 RDO3339WBC30/3342 BR or BL 1 RDO3342 1 RDO3342WBC33/3630 BR or BL 1 RDO3930 1 RDO3930WBC36/3924 BR or BL 1 RDO4524 1 RDO4524WBC36/3930 BR or BL 1 RDO4530 1 RDO4530WBC36/3936 BR or BL 1 RDO4536 1 RDO4536WBC36/3939 BR or BL 1 RDO4539 1 RDO4539WBC36/3942 BR or BL 1 RDO4542 1 RDO4542WBC42/4530 BR or BL 1 RDOWBC42/4530B 1 RDOWBC42/4530B 1 RDO1530 1 RDO1530WBC48/5130 BR or BL 1 RDO3330 1 RDO3330 1 RDO1830 1 RDO1830WCA1230 1 RDO3330 1 RDO3330WCA1236 1 RDO3336 1 RDO3336WCA1239 1 RDO3339 1 RDO3339WCA1242 1 RDO3342 1 RDO3342WEC1230 2 RDO930 2 RDO930WEC1236 2 RDO936 2 RDO936WEC1239 2 RDO939 2 RDO939WEC1242 2 RDO942 2 RDO942WEZR2430 1 RDOWEZR30 1 RDOWEZR30WEZR2436 1 RDOWEZR36 1 RDOWEZR36WEZR2439 1 RDOWEZR39 1 RDOWEZR39WEZR2442 1 RDOWEZR42 1 RDOWEZR42WMC2736B 2 RDO2715B 2 RDO2715BWMC2745B 2 RDO2724B 2 RDO2724BWMC3036B 2 RDO3015B 2 RDO3015BWMC3045B 2 RDO3024B 2 RDO3024BWMSC2436B 2 RDO2415B 2 RDO2415BWMSC2730B 2 RDO2712B 2 RDO2712BWMSC2736B 2 RDO2715B 2 RDO2715BWMSC2742B 2 RDO2718B 2 RDO2718BWR3012 2 RDO1512 2 RDO1512WR3012B 2 RDO3012B 2 RDO3012BWR3015 2 RDO1515 2 RDO1515WR3015B 2 RDO3015B 2 RDO3015BWR3018 2 RDO1518 2 RDO1518WR3018B 2 RDO3018B 2 RDO3018BWR3312 2 RDO3312 2 RDO3312WR3312B 2 RDO3312B 2 RDO3312BWR3315 2 RDO3315 2 RDO3315WR3315B 2 RDO3315B 2 RDO3315BWR3318 2 RDO3318 2 RDO3318WR3318B 2 RDO3318B 2 RDO3318BWR3612 2 RDO1812 2 RDO1812WR3612B 2 RDO3612B 2 RDO3612BWR3615 2 RDO1815 2 RDO1815WR3615B 2 RDO3615B 2 RDO3615BWR3618 2 RDO1818 2 RDO1818WR3618B 2 RDO3618B 2 RDO3618BWR3624 2 RDO1824 2 RDO1824
WR3624B 2 RDO3624B 2 RDO3624BWR3627 2 RDO1827 2 RDO1827WR3627B 2 RDO3627B 2 RDO3627BWR3912 2 RDO1812 2 RDO1812WR3915 2 RDO3915 2 RDO3915WR3918 2 RDO3918 2 RDO3918WR3924 2 RDO3924 2 RDO3924WR3927 2 RDO3927 2 RDO3927WR4212 2 RDO2112 2 RDO2112WR4218 2 RDO2118 2 RDO2118WR4224 2 RDO2124 2 RDO2124
PART Traditional Overlay Full Overlay
RD0956•B N/A 8 5/8 x 55 5/8
RDO36TALLB 17 1/16 X 60 1/2 17 3/4 X 61 1/8
RDO30TALLB 14 1/16 X 60 1/2 14 3/4 X 61 1/8
RDO24TALLB 11 1/16 X 60 1/2 11 3/4 X 61 1/8
RDO24TALL 22 1/4 X 60 1/2 23 5/8 X 61 1/8
RDO18TALL 16 1/4 X 60 1/2 17 5/8 X 61 1/8
RDO15TALL 13 1/4 X 60 1/2 14 5/8 X 61 1/8
RDF39STDUT 5 1/2 X 37 1/4 N/A
RDF36STDUT 5 1/2 X 34 1/4 6 1/8 X 35 5/8
RDF33STDUT 5 1/2 X 31 1/4 6 1/8 X 32 5/8
RDF30STDUT 5 1/2 X 28 1/4 6 1/8 X 29 5/8
RDF27STDUT 5 1/2 X 25 1/4 N/A
RDF24STDUT 5 1/2 X 22 1/4 N/A
RDF21STDUT 5 1/2 X 19 1/4 N/A
RDF24STDUBT 5 1/2 X 22 1/4 6 1/8 X 23 5/8
RDFSFA39STD 5 1/2 X 19 6 1/8 X 18 7/8
RDF45STD 5 1/2 X 20 3/4 6 1/8 X 22 1/8
RDF39STD 5 1/2 X 37 1/4 6 1/8 X 38 5/8
RDF36STD 5 1/2 X 34 1/4 6 1/8 X 35 5/8
RDF33STD 5 1/2 X 31 1/4 6 1/8 X 32 5/8
RDF30STD 5 1/2 X 28 1/4 6 1/8 X 29 5/8
RDF27STD 5 1/2 X 25 1/4 6 1/8 X 26 5/8
RDF24STD 5 1/2 X 22 1/4 6 1/8 X 23 5/8
RDF21STD 5 1/2 X 19 1/4 6 1/8 X 20 5/8
RDF18STD 5 1/2 X 16 1/4 6 1/8 X 17 5/8
RDF15STD 5 1/2 X 13 1/4 6 1/8 X 14 5/8
RDF12STD 5 1/2 X 10 1/4 6 1/8 X 11 5/8
RDOVB60FH 12 5/8 X 25 14 X 26 1/4
RDF24DP3 N/A 10 3/4 X 23 5/8
RDF21DP3 N/A 10 3/4 X 20 5/8
RDF18DP3 N/A 10 3/4 X 17 5/8
RDF15DP3 N/A 10 3/4 X 14 5/8
RDF12DP3 N/A 10 3/4 X 11 5/8
RDF36DP2 10 3/8 X 34 1/4 11 3/16 X 35 5/8
RDF33DP2 10 3/8 X 31 1/4 11 3/16 X 32 5/8
RDF30DP2 10 3/8 X 28 1/4 11 3/16 X 29 5/8
RDF27DP2 10 3/8 X 25 1/4 11 3/16 X 26 5/8
RDF24DP2 10 3/8 X 22 1/4 11 3/16 X 23 5/8
RDF21DP2 10 3/8 X 19 1/4 11 3/16 X 20 5/8
RDF18DP2 10 3/8 X 16 1/4 11 3/16 X 17 5/8
RDF15DP2 10 3/8 X 13 1/4 11 3/16 X 14 5/8
RDF12DP2 10 3/8 X 10 1/4 11 3/16 X 11 5/8
RDF27DP1 9 X 25 1/4 9 3/4 X 26 5/8
RDF24DP1 9 X 22 1/4 9 3/4 X 23 5/8
RDF21DP1 9 X 19 1/4 9 3/4 X 20 5/8
RDF18DP1 9 X 16 1/4 9 3/4 X 17 5/8
RDF15DP1 9 X 13 1/4 9 3/4 X 14 5/8
RDF12DP1 9 X 10 1/4 9 3/4 X 11 5/8
Door & Drawer Fronts - Sizes L25
Replacement Parts
PART Traditional Overlay Full Overlay
Door & Drawer Fronts - SizesL26
Repl
acem
ent P
arts
RDF36DKD 3 1/2 X 34 1/4 4 1/8 X 35 5/8
RDF30DKD 3 1/2 X 28 1/4 4 1/8 X 29 5/8
RDF24DKD 3 1/2 X 22 1/4 4 1/8 X 23 5/8
RDF18DKD 3 1/2 X 16 1/4 4 1/8 X 17 5/8
RDF24DFD 22 1/4 X 16 23 5/8 X 17 1/4
RDF21DFD 19 1/4 X 16 20 5/8 X 17 1/4
RDF18DFD 16 1/4 X 16 17 5/8 X 17 1/4
RDF15DFD 13 1/4 X 16 14 5/8 X 17 1/4
RDF36BPPS 13 1/4 X 34 1/4 14 1/2 X 35 5/8
RDF33BPPS 13 1/4 X 31 1/4 14 1/2 X 32 5/8
RDF30BPPS 13 1/4 X 28 1/4 14 1/2 X 29 5/8
RDF27BPPS 13 1/4 X 25 1/4 14 1/2 X 26 5/8
RDOBCA24BFH 15 25/32 X 28 16 15/32 X 29 1/4
RDOVSB6035-4D 18 5/8 X 21 1/2 20 X 22 3/4
RDO1848 16 1/4 X 46 17 5/8 X 47 1/4
RDO3642BS 17 1/16 X 40 17 3/4 X 41 1/4
RDO3342BS 15 9/16 X 40 16 1/4 X 41 1/4
RDO3042BS 14 1/16 X 40 14 3/4 X 41 1/4
RDO2742B 12 9/16 X 40 13 1/4 X 41 1/4
RDO2442BS 11 1/16 X 40 11 3/4 X 41 1/4
SAvailable in GD, MG, or PR option
RDO942 7 1/4 X 40 8 5/8 X 41 1/4
RDO4542 20 3/4 X 40 22 1/8 X 41 1/4
RDO3942 17 3/4 X 40 19 1/8 X 41 1/4
RDO3342S 14 3/4 X 40 16 1/8 X 41 1/4
RDO2742 11 3/4 X 40 13 1/8 X 41 1/4
RDO2442S 22 1/4 X 40 23 5/8 X 41 1/4
RDO2142S 19 1/4 X 40 20 5/8 X 41 1/4
RDO1842S 16 1/4 X 40 17 5/8 X 41 1/4
RDO1542S 13 1/4 X 40 14 5/8 X 41 1/4
RDO1242 10 1/4 X 40 11 5/8 X 41 1/4
SAvailable in GD, MG, or PR option
RDFVSB60-3DSTD 5 1/2 X 18 5/8 6 1/8 X 20
RDOVSB60-3D 18 5/8 X 18 1/2 20 X 19 3/4
RDO3639BS 17 1/16 X 37 17 3/4 X 38 1/4
RDO3339B 14 3/4 X 37 16 1/4 X 38 1/4
RDO3039BS 14 1/16 X 37 14 3/4 X 38 1/4
RDO2739B 12 9/16 X 37 13 1/4 X 38 1/4
RDO2439BS 11 1/16 X 37 11 3/4 X 38 1/4
SAvailable in GD, MG, or PR option
RDO939 7 1/4 X 37 8 5/8 X 38 1/4
RDO4539 20 3/4 X 37 22 1/8 X 38 1/4
RDO3939 17 3/4 X 37 19 1/8 X 38 1/4
RDO3339 14 3/4 X 37 14 5/8 X 38 1/4
RDO2739 11 3/4 X 37 13 1/8 X 38 1/4
RDO2439S 22 1/4 X 37 23 5/8 X 38 1/4
RDO2139S 19 1/4 X 37 20 5/8 X 38 1/4
PART Traditional Overlay Full Overlay
Replacement Parts
Door & Drawer Fronts - Sizes L27
RDO1839 16 1/4 X 37 17 5/8 X 38 1/4
RDO1539S 13 1/4 X 37 14 5/8 X 38 1/4
RDO1239 N/A 11 5/8 X 38 1/4
SAvailable in GD, MG, or PR option
RDO3636BS 17 1/16 X 34 17 3/4 X 35 1/4
RDO3336BS 15 9/16 X 34 16 1/4 X 35 1/4
RDO3036BS 14 1/16 X 34 14 3/4 X 35 1/4
RDO2736B 12 9/16 X 34 13 1/4 X 35 1/4
RDO2436BS 11 1/16 X 34 11 3/4 X 35 1/4
SAvailable in GD, MG, or PR option
RDO936 7 1/4 X 34 8 5/8 X 35 1/4
RDO4536 20 3/4 X 34 22 1/8 X 35 1/4
RDO3936 17 3/4 X 34 19 1/8 X 35 1/4
RDO3336S 14 3/4 X 34 16 1/8 X 35 1/4
RDO2736 11 3/4 X 34 13 1/8 X 35 1/4
RDO2436S 22 1/4 X 34 23 5/8 X 35 1/4
RDO2136S 19 1/4 X 34 20 5/8 X 35 1/4
RDO1836S 16 1/4 X 34 17 5/8 X 35 1/4
RDO1536S 13 1/4 X 34 14 5/8 X 35 1/4
RDO1236 10 1/4 X 34 11 5/8 X 35 1/4
SAvailable in GD, MG, or PR option
RDOVB6035FH 12 5/8 X 28 14 X 29 1/4
RDO930BPO 7 1/4 X 28 8 5/8 X 29 1/4
RDO3630B 17 1/16 X 28 17 3/4 X 29 1/4
RDO3330BS 15 9/16 X 28 16 1/4 X 29 1/4
RDO3030BS 14 1/16 X 28 14 3/4 X 29 1/4
RDO2730B 12 9/16 X 28 13 1/4 X 29 1/4
RDO2430BS 11 1/16 X 28 11 3/4 X 29 1/4
SAvailable in GD, MG, or PR option
RDO930 7 1/4 X 28 8 5/8 X 29 1/4
RDO4530 20 3/4 X 28 22 1/8 X 29 1/4
RDO3930 17 3/4 X 28 19 1/8 X 29 1/4
RDO3330S 14 3/4 X 28 16 1/8 X 29 1/4
RDO2730 11 3/4 X 28 13 1/8 X 29 1/4
RDO2430S 22 1/4 X 28 23 5/8 X 29 1/4
RDO2130S 19 1/4 X 28 20 5/8 X 29 1/4
RDO1830S 16 1/4 X 28 17 5/8 X 29 1/4
RDO1530S 13 1/4 X 28 14 5/8 X 29 1/4
RDO1230 10 1/4 X 28 11 5/8 X 29 1/4
SAvailable in GD, MG, or PR option
RDFVCD/VSB60-2DSTD 5 1/2 X 27 6 1/8 X 28 3/8
RDO3627B 17 1/16 X 25 17 3/4 X 26 1/4
RDO3327B 15 9/16 X 25 16 1/4 X 26 1/4
RDO3027B 14 1/16 X 25 14 3/4 X 26 1/4
RDO2727B 12 9/16 X 25 13 1/4 X 26 1/4
RDO2427B 11 1/16 X 25 11 3/4 X 26 1/4
RDO927 7 1/4 X 25 8 5/8 X 26 1/4
RDO4527 20 3/4 X 25 22 1/8 X 26 1/4
RDO3927 17 3/4 X 25 19 1/8 X 26 1/4
PART Traditional Overlay Full Overlay
Door & Drawer Fronts - SizesL28
Repl
acem
ent P
arts
RDO3327 14 3/4 X 25 16 1/8 X 26 1/4
RDO2427 22 1/4 X 25 23 5/8 X 26 1/4
RDO2127 19 1/4 X 25 20 5/8 X 26 1/4
RDO1827 16 1/4 X 25 17 5/8 X 26 1/4
RDO1527 13 1/4 X 25 14 5/8 X 26 1/4
RDO1227 10 1/4 X 25 11 5/8 X 26 1/4
RDO1824BWBT 16 1/4 X 21 1/2 17 5/8 X 22 3/4
RDO1524BWBT 13 1/4 X 21 1/2 14 5/8 X 22 3/4
RDO3624B 17 1/16 X 21 1/2 17 3/4 X 22 3/4
RDO3324B 15 9/16 X 21 1/2 16 1/4 X 22 3/4
RDO3024BS 14 1/16 X 21 1/2 14 3/4 X 22 3/4
RDO2724B 12 9/16 X 21 1/2 13 1/4 X 22 3/4
RDO2424BS 11 1/16 X 21 1/2 11 3/4 X 22 3/4
SAvailable in GD, MG, or PR option
RDO4524 20 3/4 X 21 1/2 22 1/8 X 22 3/4
RDO3924 17 3/4 X 21 1/2 19 1/8 X 22 3/4
RDO3324 14 3/4 X 21 1/2 16 1/8 X 22 3/4
RDO2724 11 3/4 X 21 1/2 13 1/8 X 22 3/4
RDO2424S 22 1/4 X 21 1/2 23 5/8 X 22 3/4
RDO2124S 19 1/4 X 21 1/2 20 5/8 X 22 3/4
RDO1824S 16 1/4 X 21 1/2 17 5/8 X 22 3/4
RDO1524S 13 1/4 X 21 1/2 14 5/8 X 22 3/4
RDO1224 10 1/4 X 21 1/2 11 5/8 X 22 3/4
SAvailable in GD, MG, or PR option
RDO3621B 17 1/16 X 18 1/2 17 3/4 X 19 3/4
RDO3321B 15 9/16 X 18 1/2 16 1/4 X 19 3/4
RDO3021B 14 1/16 X 18 1/2 14 3/4 X 19 3/4
RDO2721B 12 9/16 X 18 1/2 13 1/4 X 19 3/4
RDO2421B 11 1/16 X 18 1/2 11 3/4 X 19 3/4
RDO3921 17 3/4 X 18 1/2 19 1/8 X 19 3/4
RDO3321 14 3/4 X 18 1/2 16 1/8 X 19 3/4
RDO2421 22 1/4 X 18 1/2 23 5/8 X 19 3/4
RDO2121 19 1/4 X 18 1/2 20 5/8 X 19 3/4
RDO1821 16 1/4 X 18 1/2 17 5/8 X 19 3/4
RDO1521 13 1/4 X 18 1/2 14 5/8 X 19 3/4
RDO1221 10 1/4 X 18 1/2 11 5/8 X 19 3/4
RDO3618B 17 1/16 X 16 17 3/4 X 17 1/4
RDO3318B 15 9/16 X 16 16 1/4 X 17 1/4
RDO3018BS 14 1/16 X 16 14 3/4 X 17 1/4
RDO2718B 12 9/16 X 16 13 1/4 X 17 1/4
RDO2418B 11 1/16 X 16 11 3/4 X 17 1/4
SAvailable in GD, MG, or PR option
RDO4518 20 3/4 X 16 22 1/8 X 17 1/4
RDO3918 17 3/4 X 16 19 1/8 X 17 1/4
RDO3318 14 3/4 X 16 16 1/8 X 17 1/4
RDO2418 22 1/4 X 16 23 5/8 X 17 1/4
RDO2118 19 1/4 X 16 20 5/8 X 17 1/4
RDO1818S 16 1/4 X 16 17 5/8 X 17 1/4
RDO1518S 13 1/4 X 16 14 5/8 X 17 1/4
SAvailable in GD, MG, or PR option
PART Traditional Overlay Full Overlay
Replacement Parts
Door & Drawer Fronts - Sizes L29
RDO3615B 17 1/16 X 13 17 3/4 X 14 1/4
RDO3315B 15 9/16 X 13 16 1/4 X 14 1/4
RDO3015B 14 1/16 X 13 14 3/4 X 14 1/4
RDO2715B 12 9/16 X 13 13 1/4 X 14 1/4
RDO2415B 11 1/16 X 13 11 3/4 X 14 1/4
RDO4515 20 3/4 X 13 22 1/8 X 14 1/4
RDO3915 17 3/4 X 13 19 1/8 X 14 1/4
RDO3315 14 3/4 X 13 16 1/8 X 14 1/4
RDO2415 22 1/4 X 13 23 5/8 X 14 1/4
RDO2115 19 1/4 X 13 20 5/8 X 14 1/4
RDO1815 16 1/4 X 13 17 5/8 X 14 1/4
RDO1515 13 1/4 X 13 14 5/8 X 14 1/4
RDO3612B 17 1/16 X 10 17 3/4 X 11 1/4
RDO3312B 15 9/16 X 10 16 1/4 X 11 1/4
RDO3012B 14 1/16 X 10 14 3/4 X 11 1/4
RDO2712B 12 9/16 X 10 13 1/4 X 11 1/4
RDO4512 20 3/4 X 10 22 1/8 X 11 1/4
RDO3912 17 3/4 X 10 19 1/8 X 11 1/4
RDO3312 14 3/4 X 10 16 1/8 X 11 1/4
RDO2412 22 1/4 X 10 23 5/8 X 11 1/4
RDO2112 19 1/4 X 10 20 5/8 X 11 1/4
RDO1812 16 1/4 X 10 17 5/8 X 11 1/4
RDO1512 13 1/4 X 10 14 5/8 X 11 1/4
RDOWEZR42 10 1/4 X 40 10 15/16 X 41 1/4
RDOWEZR39 10 1/4 X 37 10 15/16 X 38 1/4
RDOWEZR36 10 1/4 X 34 10 15/16 X 35 1/4
RDOWEZR30 10 1/4 X 28 10 15/16 X 29 1/4
RDOWBC42/4530B N/A 14 x 29 1/4
RDOWBC24/2742 8 3/4 X 40 10 1/8 X 41 1/4
RDOWBC24/2739 8 3/4 X 37 10 1/8 X 38 1/4
RDOWBC24/2736 8 3/4 X 34 10 1/8 X 35 1/4
RDOWBC24/2730 8 3/4 X 28 10 1/8 X 29 1/4
RDOVCD/VSB60 12 5/8 X 18 1/2 14 X 19 3/4
RDOUBLS 10 1/8 X 24 1/4 N/A
RDOUBCR36 10 1/4 X 25 10 15/16 X 26 1/4
RDOSFA42 23 1/4 X 21 1/2 23 1/8 X 22 3/4
RDOSFA39 19 X 21 1/2 18 7/8 X 22 3/4
RDOSBC60-VCD/VSB6035 12 5/8 X 21 1/2 14 X 22 3/4
RDOBLS 10 1/8 X 27 1/4 N/A
RDOBCR36 10 1/4 X 28 10 15/16 X 29 1/4
RDOBCR33 7 1/4 X 28 7 15/16 X 29 1/4
RDOBBC36/39 8 3/4 X 21 1/2 10 1/8 X 22 3/4
RDFSBA/SFA42STD 5 1/2 X 23 1/4 6 1/8 X 23 1/8
RDFBBC45/48STD 5 1/2 X 17 3/4 6 1/8 X 19 1/8
RDFBBC36/39STD 5 1/2 X 8 3/4 6 1/8 X 10 1/8
RDF33/2STD 5 1/2 X 14 3/4 6 1/8 X 16 1/8
RDF27/2STD 5 1/2 X 11 3/4 6 1/8 X 13 1/8
Accessory Non-Drilled DoorsL30
PART Traditional Overlay Full Overlay
ANDO1221 10 1/4 X 18 1/2 11 5/8 X 19 3/4
ANDO1224 10 1/4 X 21 1/2 11 5/8 X 22 3/4
ANDO1227 10 1/4 X 25 11 5/8 X 26 1/4
ANDO1230 10 1/4 X 28 11 5/8 X 29 1/4
ANDO1236 10 1/4 X 34 11 5/8 X 35 1/4
ANDO1239 10 1/4 X 37 11 5/8 X 38 1/4
ANDO1242 10 1/4 X 40 11 5/8 X 41 1/4
ANDO1512 13 1/4 X 10 14 5/8 X 11 1/4
ANDO1515 13 1/4 X 13 14 5/8 X 14 1/4
ANDO1518 * 13 1/4 X 16 14 5/8 X 17 1/4
ANDO1521 13 1/4 X 18 1/2 14 5/8 X 19 3/4
ANDO1524 * 13 1/4 X 21 1/2 14 5/8 X 22 3/4
ANDO1527 13 1/4 X 25 14 5/8 X 26 1/4
ANDO1530 * 13 1/4 X 28 14 5/8 X 29 1/4
ANDO1536 * 13 1/4 X 34 14 5/8 X 35 1/4
ANDO1539 * 13 1/4 X 37 14 5/8 X 38 1/4
ANDO1542 * 13 1/4 X 40 14 5/8 X 41 1/4
ANDO15TALL 13 1/4 X 60 1/2 14 5/8 X 61 1/8
ANDO1812 16 1/4 X 10 17 5/8 X 11 1/4
ANDO1815 16 1/4 X 13 17 5/8 X 14 1/4
ANDO1818 * 16 1/4 X 16 17 5/8 X 17 1/4
ANDO1821 16 1/4 X 18 1/2 17 5/8 X 19 3/4
ANDO1824 * 16 1/4 X 21 1/2 17 5/8 X 22 3/4
ANDO1827 16 1/4 X 25 17 5/8 X 26 1/4
ANDO1830 * 16 1/4 X 28 17 5/8 X 29 1/4
ANDO1836 * 16 1/4 X 34 17 5/8 X 35 1/4
ANDO1839 * 16 1/4 X 37 17 5/8 X 38 1/4
ANDO1842 * 16 1/4 X 40 17 5/8 X 41 1/4
ANDO1848 16 1/4 X 46 17 5/8 X 47 1/4
ANDO18TALL 16 1/4 X 60 1/2 17 5/8 X 61 1/8
ANDO2112 19 1/4 X 10 20 5/8 X 11 1/4
ANDO2115 19 1/4 X 13 20 5/8 X 14 1/4
ANDO2118 19 1/4 X 16 20 5/8 X 17 1/4
ANDO2121 19 1/4 X 18 1/2 20 5/8 X 19 3/4
ANDO2124 * 19 1/4 X 21 1/2 20 5/8 X 22 3/4
ANDO2127 19 1/4 X 25 20 5/8 X 26 1/4
ANDO2130 * 19 1/4 X 28 20 5/8 X 29 1/4
ANDO2136 * 19 1/4 X 34 20 5/8 X 35 1/4
ANDO2139 * 19 1/4 X 37 20 5/8 X 38 1/4
ANDO2142 * 19 1/4 X 40 20 5/8 X 41 1/4
ANDO2415 22 1/4 X 13 23 5/8 X 14 1/4
ANDO2415B 11 1/16 X 13 11 3/4 X 14 1/4
ANDO2418 22 1/4 X 16 23 5/8 X 17 1/4
ANDO2418B 11 1/16 X 16 11 3/4 X 17 1/4
ANDO2421 22 1/4 X 18 1/2 23 5/8 X 19 3/4
ANDO2421B 11 1/16 X 18 1/2 11 3/4 X 19 3/4
ANDO2424B * 11 1/16 X 21 1/2 11 3/4 X 22 3/4
ANDO2424 * 22 1/4 X 21 1/2 23 5/8 X 22 3/4
ANDO2427 22 1/4 X 25 23 5/8 X 26 1/4
ANDO2427B 11 1/16 X 25 11 3/4 X 26 1/4
ANDO2430B * 11 1/16 X 28 11 3/4 X 29 1/4
ANDO2430 * 22 1/4 X 28 23 5/8 X 29 1/4
ANDO2436B * 11 1/16 X 34 11 3/4 X 35 1/4
ANDO2436 * 22 1/4 X 34 23 5/8 X 35 1/4
ANDO2439B * 11 1/16 X 37 11 3/4 X 38 1/4
ANDO2439 * 22 1/4 X 37 23 5/8 X 38 1/4
* Available in GD, MG, or PR option
Repl
acem
ent P
arts
Accessory Non-Drilled Doors L31
PART Traditional Overlay Full Overlay
Replacement Parts
ANDO2442B * 11 1/16 X 40 11 3/4 X 41 1/4
ANDO2442 * 22 1/4 X 40 23 5/8 X 41 1/4
ANDO24TALL 22 1/4 X 60 1/2 23 5/8 X 61 1/8
ANDO24TALLB 11 1/16 X 60 1/2 11 3/4 X 61 1/8
ANDO2712B 12 9/16 X 10 13 1/4 X 11 1/4
ANDO2715B 12 9/16 X 13 13 1/4 X 14 1/4
ANDO2718B 12 9/16 X 16 13 1/4 X 17 1/4
ANDO2721B 12 9/16 X 18 1/2 13 1/4 X 19 3/4
ANDO2724 11 3/4 X 21 1/2 13 1/8 X 22 3/4
ANDO2724B 12 9/16 X 21 1/2 13 1/4 X 22 3/4
ANDO2727B 12 9/16 X 25 13 1/4 X 26 1/4
ANDO2730 11 3/4 X 28 13 1/8 X 29 1/4
ANDO2730B 12 9/16 X 28 13 1/4 X 29 1/4
ANDO2736 11 3/4 X 34 13 1/8 X 35 1/4
ANDO2736B 12 9/16 X 34 13 1/4 X 35 1/4
ANDO2739 11 3/4 X 37 13 1/8 X 38 1/4
ANDO2739B 12 9/16 X 37 13 1/4 X 38 1/4
ANDO2742 11 3/4 X 40 13 1/8 X 41 1/4
ANDO2742B 12 9/16 X 40 13 1/4 X 41 1/4
ANDO3012B 14 1/16 X 10 14 3/4 X 11 1/4
ANDO3015B 14 1/16 X 13 14 3/4 X 14 1/4
ANDO3018B * 14 1/16 X 16 14 3/4 X 17 1/4
ANDO3021B 14 1/16 X 18 1/2 14 3/4 X 19 3/4
ANDO3024B * 14 1/16 X 21 1/2 14 3/4 X 22 3/4
ANDO3027B 14 1/16 X 25 14 3/4 X 26 1/4
ANDO3030B * 14 1/16 X 28 14 3/4 X 29 1/4
ANDO3036B * 14 1/16 X 34 14 3/4 X 35 1/4
ANDO3039B * 14 1/16 X 37 14 3/4 X 38 1/4
ANDO3042B * 14 1/16 X 40 14 3/4 X 41 1/4
ANDO30TALLB 14 1/16 X 60 1/2 14 3/4 X 61 1/8
ANDO3312 14 3/4 X 10 16 1/8 X 11 1/4
ANDO3312B 15 9/16 X 10 16 1/4 X 11 1/4
ANDO3315 14 3/4 X 13 16 1/8 X 14 1/4
ANDO3315B 15 9/16 X 13 16 1/4 X 14 1/4
ANDO3318 14 3/4 X 16 16 1/8 X 17 1/4
ANDO3318B 15 9/16 X 16 16 1/4 X 17 1/4
ANDO3321 14 3/4 X 18 1/2 16 1/8 X 19 3/4
ANDO3321B 15 9/16 X 18 1/2 16 1/4 X 19 3/4
ANDO3324 14 3/4 X 21 1/2 16 1/8 X 22 3/4
ANDO3324B 15 9/16 X 21 1/2 16 1/4 X 22 3/4
ANDO3327 14 3/4 X 25 16 1/8 X 26 1/4
ANDO3327B 15 9/16 X 25 16 1/4 X 26 1/4
ANDO3330B * 15 9/16 X 28 16 1/4 X 29 1/4
ANDO3330 * 14 3/4 X 28 16 1/8 X 29 1/4
ANDO3336B * 15 9/16 X 34 16 1/4 X 35 1/4
ANDO3336 * 14 3/4 X 34 16 1/8 X 35 1/4
ANDO3339 14 3/4 X 37 16 1/8 X 38 1/4
ANDO3339B * 15 9/16 X 37 16 1/4 X 38 1/4
ANDO3342B * 15 9/16 X 40 16 1/4 X 41 1/4
ANDO3342 * 14 3/4 X 40 16 1/8 X 41 1/4
ANDO3612B 17 1/16 X 10 17 3/4 X 11 1/4
ANDO3615B 17 1/16 X 13 17 3/4 X 14 1/4
ANDO3618B 17 1/16 X 16 17 3/4 X 17 1/4
ANDO3621B 17 1/16 X 18 1/2 17 3/4 X 19 3/4
ANDO3624B 17 1/16 X 21 1/2 17 3/4 X 22 3/4
ANDO3627B 17 1/16 X 25 17 3/4 X 26 1/4
ANDO3630B 17 1/16 X 28 17 3/4 X 29 1/4
* Available in GD, MG, or PR option
Accessory Non-Drilled DoorsL32
PART Traditional Overlay Full Overlay
Repl
acem
ent P
arts
ANDO3636B * 17 1/16 X 34 17 3/4 X 35 1/4
ANDO3639B * 17 1/16 X 37 17 3/4 X 38 1/4
ANDO3642B * 17 1/16 X 40 17 3/4 X 41 1/4
ANDO36TALLB 17 1/16 X 60 1/2 17 3/4 X 61 1/8
ANDO3912 17 3/4 X 10 19 1/8 X 11 1/4
ANDO3915 17 3/4 X 13 19 1/8 X 14 1/4
ANDO3918 17 3/4 X 16 19 1/8 X 17 1/4
ANDO3921 17 3/4 X 18 1/2 19 1/8 X 19 3/4
ANDO3924 17 3/4 X 21 1/2 19 1/8 X 22 3/4
ANDO3927 17 3/4 X 25 19 1/8 X 26 1/4
ANDO3930 17 3/4 X 28 19 1/8 X 29 1/4
ANDO3936 17 3/4 X 34 19 1/8 X 35 1/4
ANDO3939 17 3/4 X 37 19 1/8 X 38 1/4
ANDO3942 17 3/4 X 40 19 1/8 X 41 1/4
ANDO4512 20 3/4 X 10 22 1/8 X 11 1/4
ANDO4515 20 3/4 X 13 22 1/8 X 14 1/4
ANDO4518 20 3/4 X 16 22 1/8 X 17 1/4
ANDO4524 20 3/4 X 21 1/2 22 1/8 X 22 3/4
ANDO4527 20 3/4 X 25 22 1/8 X 26 1/4
ANDO4530 20 3/4 X 28 22 1/8 X 29 1/4
ANDO4536 20 3/4 X 34 22 1/8 X 35 1/4
ANDO4539 20 3/4 X 37 22 1/8 X 38 1/4
ANDO4542 20 3/4 X 40 22 1/8 X 41 1/4
ANDO927 7 1/4 X 25 8 5/8 X 26 1/4
ANDO930 7 1/4 X 28 8 5/8 X 29 1/4
ANDO936 7 1/4 X 34 8 5/8 X 35 1/4
ANDO939 7 1/4 X 37 8 5/8 X 38 1/4
ANDO942 7 1/4 X 40 8 5/8 X 41 1/4
ANDOBBC36/39 8 3/4 X 21 1/2 10 1/8 X 22 3/4
ANDOBCA24BFH 15 25/32 X 28 16 15/32 X 29 1/4
ANDOBCR33 7 1/4 X 28 7 15/16 X 29 1/4
ANDOBCR36 10 1/4 X 28 10 15/16 X 29 1/4
ANDOMDEP 19 1/4 X 22 1/2 20 5/8 X 23 3/4
ANDOMTEP1218 10 1/4 X 16 11 3/4 X 17 1/4
ANDOMTEP12TALL 10 1/4 X 60 1/2 11 3/4 X 61 1/8
ANDOMTEP21TALL 19 1/4 X 60 1/2 20 5/8 X 61 1/8
ANDOSBC60-VCD/VSB6035 12 5/8 X 21 1/2 14 X 22 3/4
ANDOFA39 19 X 21 1/2 18 7/8 X 22 3/4
ANDOFA42 23 1/4 X 21 1/2 23 1/8 X 22 3/4
ANDOUBCR36 10 1/4 X 25 11 5/8 X 26 1/4
ANDOVSB6035FH 12 5/8 X 28 14 X 29 1/4
ANDOVSB60FH 12 5/8 X 25 14 X 26 1/4
ANDOVCD/VSB60 12 5/8 X 18 1/2 14 X 19 3/4
ANDOVSB60-3D 18 5/8 X 18 1/2 20 X 19 3/4
ANDOVSB6035-4D 18 5/8 X 21 1/2 20 X 22 3/4
ANDOWBC24/2730 8 3/4 X 28 10 1/8 X 29 1/4
ANDOWBC24/2736 8 3/4 X 34 10 1/8 X 35 1/4
ANDOWBC24/2739 8 3/4 X 37 10 1/8 X 38 1/4
ANDOWBC24/2742 8 3/4 X 40 10 1/8 X 41 1/4
ANDOWEZR30 10 1/4 X 28 10 15/16 X 29 1/4
ANDOWEZR36 10 1/4 X 34 10 15/16 X 35 1/4
ANDOWEZR39 10 1/4 X 37 10 15/16 X 38 1/4
ANDOWEZR42 10 1/4 X 40 10 15/16 X 41 1/4
* Available in GD, MG, or PR option
PART Standard
PKDC1.88X14.00X18.94 1 7/8 X 14 X 18 15/16
PKDC1.88X20.00X18.94 1 7/8 X 20 X 18 15/16
PKDC1.88X26.00X18.94 1 7/8 X 26 X 18 15/16
PKDC1.88X32.00X18.94 1 7/8 X 32 X 18 15/16
PKDC3.88X11.00X15.69 3 7/8 X 11 X 15 11/16
PKDC3.88X11.00X18.94 3 7/8 X 11 X 18 15/16
PKDC3.88X11.00X21.69 3 7/8 X 11 X 21 11/16
PKDC3.88X12.50X21.69 3 7/8 X 12 1/2 X 21 11/16
PKDC3.88X14.00X15.69 3 7/8 X 14 X 15 11/16
PKDC3.88X14.00X18.94 3 7/8 X 14 X 18 15/16
PKDC3.88X14.00X21.69 3 7/8 X 14 X 21 11/16
PKDC3.88X15.50X21.69 3 7/8 X 15 1/2 X 21 11/16
PKDC3.88X17.00X15.69 3 7/8 X 17 X 15 11/16
PKDC3.88X17.00X18.94 3 7/8 X 17 X 18 15/16
PKDC3.88X17.00X21.69 3 7/8 X 17 X 21 11/16
PKDC3.88X18.50X21.69 3 7/8 X 18 1/2 X 21 11/16
PKDC3.88X20.00X15.69 3 7/8 X 20 X 15 11/16
PKDC3.88X20.00X18.94 3 7/8 X 20 X 18 15/16
PKDC3.88X20.00X21.69 3 7/8 X 20 X 21 11/16
PKDC3.88X23.00X21.69 3 7/8 X 23 X 21 11/16
PKDC3.88X6.50X18.94 3 7/8 X 6 1/2 X 18 15/16
PKDC3.88X6.50X21.69 3 7/8 X 6 1/2 X 21 11/16
PKDC3.88X8.00X15.69 3 7/8 X 8 X 15 11/16
PKDC3.88X8.00X18.94 3 7/8 X 8 X 18 15/16
PKDC3.88X8.00X21.69 3 7/8 X 8 X 21 11/16
PKDC3.88X9.50X21.69 3 7/8 X 9 1/2 X 21 11/16
PKDC4.00X26.00X21.69 4 X 26 X 21 11/16
PKDC4.00X29.00X21.69 4 X 29 X 21 11/16
PKDC4.00X32.00X21.69 4 X 32 X 21 11/16
PKDC4.00X35.00X21.69 4 X 35 X 21 11/16
PKDC7.13X10.81X18.94 7 1/8 X 10 13/16 X 18 15/16
PKDC7.13X11.00X15.69 7 1/8 X 11 X 15 11/16
PKDC7.13X11.00X18.94 7 1/8 X 11 X 18 15/16
PKDC7.13X11.00X21.69 7 1/8 X 11 X 21 11/16
PKDC7.13X13.81X18.94 7 1/8 X 13 13/16 X 18 15/16
PKDC7.13X14.00X15.69 7 1/8 X 14 X 15 11/16
PKDC7.13X14.00X18.94 7 1/8 X 14 X 18 15/16
PKDC7.13X14.00X21.69 7 1/8 X 14 X 21 11/16
PKDC7.13X16.81X18.94 7 1/8 X 16 13/16 X 18 15/16
PKDC7.13X17.00X15.69 7 1/8 X 17 X 15 11/16
PKDC7.13X17.00X18.94 7 1/8 X 17 X 18 15/16
PKDC7.13X17.00X21.69 7 1/8 X 17 X 21 11/16
PKDC7.13X19.81X18.94 7 1/8 X 19 13/16 X 18 15/16
PKDC7.13X19.81X21.69 7 1/8 X 19 13/16 X 21 11/16
PKDC7.13X20.00X15.69 7 1/8 X 20 X 15 11/16
PKDC7.13X20.00X18.94 7 1/8 X 20 X 18 15/16
PKDC7.13X20.00X21.69 7 1/8 X 20 X 21 11/16
PKDC7.13X22.81X21.69 7 1/8 X 22 13/16 X 21 11/16
PKDC7.13X23.00X21.69 7 1/8 X 23 X 21 11/16
PKDC7.13X8.00X15.69 7 1/8 X 8 X 15 11/16
PKDC7.13X8.00X18.94 7 1/8 X 8 X 18 15/16
PKDC7.13X8.00X21.69 7 1/8 X 8 X 21 11/16
PKDC7.13X25.81X21.69 7 1/4 X 25 13/16 X 21 11/16
PKDC7.25X28.81X21.690X21.69 7 1/4 X 29 X 21 11/16
PKDC7.25X31.81X21.69 7 1/4 x 31 13/16 x 21 11/16
Replacement Parts
Drawer Box Sizes - Standard L33
Drawer Box Sizes-DovetailL34
Repl
acem
ent P
arts
PART Dovetail
PKDC2.00X14.45X17.72 2 X 14 7/16 X 17 11/16
PKDC2.00X20.45X17.72 2 X 20 7/16 X 17 11/16
PKDC2.00X26.45X17.72 2 X 26 7/16 X 17 11/16
PKDC2.00X32.45X17.72 2 X 32 7/16 X 17 11/16
PKDC4.00X11.45X14.76 3 15/16 X 11 7/16 X 14 3/4
PKDC4.00X11.45X17.72 3 15/16 X 11 7/16 X 17 11/16
PKDC4.00X11.45X20.67 3 15/16 X 11 7/16 X 20 11/16
PKDC4.00X12.95X20.67 3 15/16 X 12 15/16 X 20 11/16
PKDC4.00X14.45X14.76 3 15/16 X 14 7/16 X 14 3/4
PKDC4.00X14.45X17.72 3 15/16 X 14 7/16 X 17 11/16
PKDC4.00X14.45X20.67 3 15/16 X 14 7/16 X 20 11/16
PKDC4.00X15.95X20.67 3 15/16 X 15 15/16 X 20 11/16
PKDC4.00X17.45X14.76 3 15/16 X 17 7/16 X 14 3/4
PKDC4.00X17.45X17.72 3 15/16 X 17 7/16 X 17 11/16
PKDC4.00X17.45X20.67 3 15/16 X 17 7/16 X 20 11/16
PKDC4.00X18.95X20.67 3 15/16 X 18 15/16 X 20 11/16
PKDC4.00X20.45X14.76 3 15/16 X 20 7/16 X 14 3/4
PKDC4.00X20.45X17.72 3 15/16 X 20 7/16 X 17 11/16
PKDC4.00X20.45X20.67 3 15/16 X 20 7/16 X 20 11/16
PKDC4.00X23.45X20.67 3 15/16 X 23 7/16 X 20 11/16
PKDC4.00X26.45X20.67 3 15/16 X 26 7/16 X 20 11/16
PKDC4.00X29.45X20.67 3 15/16 X 29 7/16 X 20 11/16
PKDC4.00X32.45X20.67 3 15/16 X 32 7/16 X 20 11/16
PKDC4.00X35.45X20.67 3 15/16 X 35 7/16 X 20 11/16
PKDC4.00X6.95X17.72 3 15/16 X 6 15/16 X 17 11/16
PKDC4.00X6.95X20.67 3 15/16 X 6 15/16 X 20 11/16
PKDC4.00X8.45X14.76 3 15/16 X 8 7/16 X 14 3/4
PKDC4.00X8.45X17.72 3 15/16 X 8 7/16 X 17 11/16
PKDC4.00X8.45X20.67 3 15/16 X 8 7/16 X 20 11/16
PKDC4.00X9.95X20.67 3 15/16 X 9 15/16 X 20 11/16
PKDC7.00X11.45X14.76 7 X 11 7/16 X 14 3/4
PKDC7.00X11.45X17.72 7 X 11 7/16 X 17 11/16
PKDC7.00X11.45X20.67 7 X 11 7/16 X 20 11/16
PKDC7.00X14.45X14.76 7 X 14 7/16 X 14 3/4
PKDC7.00X14.45X17.72 7 X 14 7/16 X 17 11/16
PKDC7.00X14.45X20.67 7 X 14 7/16 X 20 11/16
PKDC7.00X17.45X14.76 7 X 17 7/16 X 14 3/4
PKDC7.00X17.45X17.72 7 X 17 7/16 X 17 11/16
PKDC7.00X17.45X20.67 7 X 17 7/16 X 20 11/16
PKDC7.00X20.45X14.76 7 X 20 7/16 X 14 3/4
PKDC7.00X20.45X17.72 7 X 20 7/16 X 17 11/16
PKDC7.00X20.45X20.67 7 X 20 7/16 X 20 11/16
PKDC7.00X23.45X20.67 7 X 23 7/16 X 20 11/16
PKDC7.00X26.45X20.67 7 X 26 7/16 X 20 11/16
PKDC7.00X29.45X20.67 7 X 29 7/16 X 20 11/16
PKDC7.00X32.45X20.67 7 X 32 7/16 X 20 11/16
PKDC7.00X8.45X14.76 7 X 8 7/16 X 14 3/4
PKDC7.00X8.45X17.72 7 X 8 7/16 X 17 11/16
Framed Cabinet Specifications M1
Framed C
abinet Specifications
WoodThe fine “furniture” finish of your cabinets is designed for daily usage. All wood and laminate surfaces may be cleaned with a damp, soft cloth moistened with pure soap suds (not detergent), then wiped dry with another soft cloth. As with all cabinet sur-faces, take a little extra care on bottom edges of cabinets and cabinet doors where invisible moisture often collects.
Note: DO NOT use detergents, soap pads, steel wool, or other harsh, abrasive material on your cabinetry.
Polishing WoodRemove dust from cabinets frequently with a soft lint-free cloth. The cloth may be slightly dampened with water or a spray type dust remover.
Clean spills immediately. Use a clean cloth and mild soap if necessary. Wipe dry with a clean soft cloth.
We recommend that you wash and polish cabinets once or twice a year. Use a light coat of quality furniture polish. Don’t use a paste wax; the wax build up is difficult to remove and will leave a residue that attracts dust and moisture. Polishes that contain silicone should not be used.
Laminate Door SurfacesPeriodically clean the interior and exterior surfaces of the door using a soft, dampened cloth. Tough stains may be cleaned using a soft cloth dampened with a “409” or “Simple Green” type cleanser.
Mullion Glass DoorsYou can use any commercial glass cleaner to clean the glass. While cleaning mounted glass, be careful not to damage the finish of the door and cabinet parts. Additionally, the glass can be cleaned while mounted on the door, or can be removed for better access.
To remove the glass panel, carefully remove glass retaining hardware/strip and lift panel out. The door glass is tempered to resist chipping and shattering. However, all glass is fragile, so handle carefully.
When cleaning mounted glass, do not spray glass cleaner direct-ly onto glass or cabinet parts. Glass cleaner seeping into areas behind the mullions may discolor the wood. Instead, spray a small amount of cleaner onto a lint-free cloth or paper towel, then wipe the glass clean.
Wire Storage ProductsPeriodically clean with soft damp cloth. Note: Do not use detergents, soap pads, steel wool, or other harsh, abrasive material.
Roller Slide SystemsPeriodically clean with a soft damp cloth. Ball bearing slides are lubricated with grease from the manufacturer to ensure smooth quiet operation and long life. Avoid removal of this grease during cleaning.
Cookbook RackUse only soap and water with soft damp cloth to clean. Note: Never use alcohol, window sprays, kitchen scouring com-pounds or solvents. These can cause damage to the material and/or affect the appearance.
Preventative Care: Self-Cleaning OvensSelf-cleaning ovens are cleaned through the use of intense heat. If the heat gasket does not seal properly, heat may escape from the oven. Cabinet components installed near the oven may suffer finish or surface damage. To minimize the risk of damage during cleaning cycles, we recommend that you open doors and drawers from cabinets that are above and adjacent to a self-cleaning oven.
Preventative Care: Heat-Producing AppliancesWe recommend that you do not mount heat-producing appliances (such as coffee makers and toaster ovens) beneath cabinets. Excess heat and moisture from these appliances can damage cabinets.
The Beauty Of Natural WoodThe natural hardwoods we use in our product have characteris-tics that make every cabinet both beautiful and unique. All hardwoods have their own personality, and variation in color, texture, and grain pattern are an inherent part of this natural material.
Natural hardwood variations often include distinctive grain patterns or unusual shadings in color. These reflect the “life history” of the tree and contribute to the unique look of your cabinets.
As with other natural materials, your hardwood cabinets will be affected by environmental factors such as natural and artificial lighting, so you can expect to see the color gradually change and mellow over time.
Your satisfaction is important to us, and we want you to feel as good about buying our cabinets as we do about making them. Be assured only the best materials go into our natural hardwood cabinetry, including those hardwoods that may be considered unique. Because, at Masco Cabinetry LLC, we believe natural distinctive hardwoods are beautiful.
Due to the unique qualities inherent in the natural hardwoods used in this cabinetry, neither Masco Cabinetry LLC, nor your dealer, can be responsible for the actual degree of variation that may characterize your cabinetry purchase.
Warping, Cracking & Proper HumidityAs a natural characteristic, all wood products contain moisture. Changes in temperature and humidity affect the moisture con-tent in wood, which causes wood to expand or contract. Over time, this expansion or contraction can cause warping and joint cracks to occur, potentially causing permanent deformations, in wood cabinetry.
To help prevent excessive movement in your wood cabinetry, we recommend maintaining a controlled environment of 70 degrees to 75 degrees Fahrenheit and 30% to 50% humidity in the areas where your cabinetry is stored or installed. Environmental condi-tions cannot be controlled by Masco Cabinetry and the effects of movement in wood is not considered to be a manufacturing defect and will not be considered as a reason for replacement.
Use and Care
Framed Cabinet SpecificationsM2
F
ram
ed C
abin
et S
peci
ficat
ions
Notes
Framed Cabinet Specifications M3
Framed Cabinet Specifications
General1.01 Scope1.01.01 The scope of this specification is to cover the
design, construction and installation of all framed Merillat kitchen and vanity cabinetry.
1.02 Submittals1.02.01 Supplier will furnish shop drawings, which are
taken from the architect’s drawings, specifically calling out the cabinet nomenclature and sizes. Supplier shall also submit floor plans and elevations for the cabinets showing layout, dimensions and details of installation.
1.02.02 Submit cabinet door samples with manufactur-er’s range of colors for selection by the archi-tect.
1.02.03 Submit manufacturer’s literature on cabinets.2.0 Product2.01 Cabinets shall be “ ” (specify door style) as
manufactured by Masco Cabinetry LLC, P.O. Box 1946, Adrian, MI 49221. Size and type as required to meet configurations indicated on drawings.
2.02 Certification2.02.01 Merillat® cabinetry carries the seal of the
Kitchen Cabinet Manufacturers Association (KCMA) Certification Program, which assures that our cabinets meet or exceed the rigorous standards set by the American National Standards Institute (ANSI). Our cabinets are also independently tested to ANSI/KCMA A161.1–2000 and paragraph 611–1.1, “HUD Minimum Property Standards–Housing 4910.1” 9-8-86.
Merillat Cabinetry demonstrates its commitment to environmental sustainability through meeting or exceeding the requirements as outlined in the Environmental Stewardship Program certification, administered by the KCMA.
All Merillat Cabinetry facilities have also obtained ISO 14001 certificate of approval, demonstrating our commitment to reducing the impact of operations on the environment.
2.03 Frame Materials-Case Construction Depending on the door style selected, all
Merillat Cabinetry cabinet frames shall be con-structed of solid hardwood matched to the door and drawer front species. All veneered compo-nents shall be selected architectural grade hard-wood veneer depending on style selected.
2.03.01 Frame Stiles/Rails Cabinet frames shall have 3
⁄4" thick x 1 1⁄2" wide
solid hardwood rail and stile members. Center stiles shall be 3
⁄4" thick x 3" or 6" wide solid hardwood. All frame joints shall be reinforced and precisely aligned with two birch dowels bonded with adhesive or with two No. 7 x 1 1
⁄4" fillister head screws.2.03.02 Standard End Panels
Standard wall, base and vanity cabinet end panels shall be 3
⁄8" thick engineered wood cov-
ered inside and outside with a moisture- and stain-resistant, easy clean laminate.
Exposed top and bottom edges are foiled with a natural woodgrain finish.
Tall cabinet end panels shall be 1⁄2" thick engi-
neered wood also laminated on both sides as previously described.
End panels shall be machined to accept tops, bottoms, backs and corner gussets.
2.03.03 Standard Construction with Plywood End Panels
Oak, Cherry, Hickory and Maple plywood wall, base and vanity cabinet end panels shall be 3
⁄8" thick plywood.
Exterior surface shall be laminated with furniture grade Maple, Cherry, Oak or Hickory veneer. Exterior surface is control-sanded for finishing, stained and wiped. After staining, the veneer surface is sealed and sanded to prepare the surface for the conversion topcoat, which cre-ates a durable furniture-quality surface. The inte-rior surface is covered with a moisture- and stain-resistant, easy clean natural woodgrain laminate.
Tall cabinet plywood end panels shall be 1⁄2"
thick plywood finished and laminated the same as described for 3
⁄8" end panels. End panels shall be machined to accept tops,
bottoms, backs and corner gussets.2.03.04 All Plywood Construction End Panels
Oak, Cherry, Hickory and Maple plywood wall, base, vanity and tall cabinet end panels shall be 1
⁄2" thick plywood. Exterior surface shall be lami-nated with furniture grade Maple, Cherry, Oak or Hickory veneer. Exterior surface is control-sand-ed for finishing, stained and wiped. After stain-ing, the veneer surface is sealed and sanded to prepare the surface for the conversion topcoat, which creates a durable furniture-quality surface. The interior surface is covered with a moisture- and stain-resistant, easy clean natural wood-grain laminate. End panels shall be machined to accept tops, bottoms, backs and corner gus-sets.
2.03.05 Standard Construction Wall Tops/Bottoms Wall cabinet tops and bottoms shall be 1
⁄2" thick engineered wood for extra strength and rigidity. Both sides shall be covered with a moisture- and stain-resistant, easy clean natural woodgrain laminate.
A dado joint and adhesive shall be used to join the tops and bottoms to the end panels.
2.03.06 All Plywood Construction Wall Tops/Bottoms Wall cabinet tops and bottoms shall be 1
⁄2" thick plywood for extra strength and rigidity. Both sides shall be covered with a moisture- and stain-resistant, easy clean natural woodgrain laminate.
A dado joint and adhesive shall be used to join
Framed Cabinet Specifications
Framed Cabinet SpecificationsM4
Fram
ed C
abin
et S
peci
ficat
ions
Framed Cabinet Specificationsthe tops and bottoms to the end panels.
2.03.07 Standard Base Tops/Bottoms Base cabinet bottoms shall be 1
⁄2" thick engi-neered wood for extra strength and rigidity. Bottoms shall be covered on the interior side only with a moisture- and stain-resistant, easy clean natural woodgrain laminate.
A dado joint and adhesive shall be used to join the bottom to end panels.
The upper portion of base cabinets shall be rein-forced with 1
⁄2" thick engineered wood gussets in all four corners which help to maintain square-ness.
2.03.08 All Plywood Construction Base Tops/Bottoms Base cabinet bottoms shall be 1
⁄2" thick plywood for extra strength and rigidity. Bottoms shall be covered on the interior side only with a moisture- and stain-resistant, easy clean natural woodgrain laminate.
A dado joint and adhesive shall be used to join the bottom to end panels.
The upper portion of base cabinets shall be rein-forced with 1
⁄2" thick plywood gussets in all four corners which help to maintain squareness.
2.03.09 Standard Base/Vanity Backs Base and vanity cabinet back panels shall be 1
⁄4" thick engineered wood covered on the interior surface only with a moisture- and stain-resistant, easy clean natural woodgrain laminate that extends to the floor.
The back panel shall be retained by a rabbet in the end panels secured with adhesive. The top of base and vanity cabinets shall have an 11
⁄16" x 2 1
⁄4" solid pine (or Douglas Fir) screw rail retained by the same rabbet as the back panel in the end panels and secured with adhesive. The screw rail shall be grooved full length on the underside to accept the top edge of the back panel.
2.03.10 All Plywood Construction Base/Vanity Backs Base and vanity cabinet back panels shall be 1
⁄4" thick plywood covered on the interior surface only with a moisture- and stain-resistant, easy clean natural woodgrain laminate that extends to the floor. The back panel shall be retained by a rabbet in the end panels secured with adhesive.
The top of base and vanity cabinets shall have an 11
⁄16" x 2 1⁄4" solid pine (or Douglas Fir) screw
rail retained by the same rabbet as the back panel in the end panels and secured with adhe-sive. The screw rail shall be grooved full length on the underside to accept the top edge of the back panel.
2.03.11 Standard Wall Backs Wall cabinet back panels shall be 3/8” thick engineered wood covered on the interior surface only with a moisture- and stain-resistant, easy clean natural woodgrain laminate. Exposed top
and bottom edges are foiled with a natural wood-grain finish. Wall cabinet back panels shall be retained by a rabbet in the end panels and secured with adhesive. For extra strength, full-length dadoes shall be machined in the back panel near the top and bottom edges same as the dadoes in the end panels to accept the top and bottom panels and shall be secured with adhesive and staples.
Wall cabinet backs shall be additionally rein-forced from behind with 2 ¾” wide x 3/8” thick engineered wood full-length hang rails across the cabinet top and bottom held in place with sta-ples. Only the edges of the hang rails are exposed which are foiled with a natural wood-grain finish.
In addition, a 3/8” thick engineered wood spac-er shall be centered on the backside of the back panel of cabinets 27” wide and wider secured with adhesive and are fully concealed after cabi-net installation.
2.03.12 All Plywood Construction Wall Backs Wall cabinet back panels shall be 3/8” thick ply-wood covered on the interior surface only with a moisture- and stain-resistant, easy clean natural woodgrain laminate. Wall cabinet back panels shall be retained by a rabbet in the end panels and secured with adhesive. For extra strength, full-length dadoes shall be machined in the back panel near the top and bottom edges same as the dadoes in the end panels to accept the top and bottom panels and shall be secured with adhesive and staples.
Wall cabinet backs shall be additionally rein-forced from behind with 2 ¾” wide x 3/8” thick plywood full-length hang rails across the cabinet top and bottom held in place with staples. Only the edges are exposed.
In addition, a 3/8” thick plywood spacer shall be centered on the backside of the back panel of cabinets 27” wide and wider secured with adhe-sive and are fully concealed after cabinet instal-lation.
2.03.13 Standard Tall Backs Tall cabinet back panels shall be 1
⁄4" thick engineered wood covered on the interior surface only with a moisture- and stain-resistant, easy clean natural woodgrain laminate.
Pantry Cabinet (PC) and 36" wide Utility cabinet (U) back panels shall be 3
⁄8" thick engineered wood laminated on the interior surface only.
Tall cabinet back panels shall be retained by a rabbet in the end panels secured with staples and adhesive. The back panel shall be secured to the top panel, fixed shelf and bottom panel with staples. Tall cabinets with 1
⁄4" thick back panels shall be additionally reinforced with four 2 3
⁄4" wide x 1⁄4" thick engineered wood full-width
Framed Cabinet Specifications M5
Framed Cabinet Specifications
rails held in place with adhesive. 2.03.14 All Plywood Construction Tall Backs
Tall cabinet back panels shall be 1⁄4" thick
plywood covered on the interior surface only with a moisture- and stain-resistant, easy clean natu-ral woodgrain laminate. Pantry Cabinet (PC) and 36" wide Utility cabinet (U) back panels shall be 3
⁄8" thick plywood laminated on the interior sur-face only.
Tall cabinet back panels shall be retained by a rabbet in the end panels secured with staples and adhesive. The back panel shall be secured to the top panel, fixed shelf and bottom panel with staples. Tall cabinets with 1
⁄4" thick back panels shall be additionally reinforced with four 2 3
⁄4" wide x 1⁄4" thick plywood full-width rails
held in place with adhesive. 2.03.15 Standard Wall Shelves
All wall cabinets 24" (actual height is 23 1⁄2")
and higher shall have adjustable shelves made of 3
⁄4" thick engineered wood. Shelves shall be covered on both sides with a moisture- and stain-resistant, easy clean laminate.
The front edge shall be laminated with matching edge banding. The cabinet end panels shall be drilled for shelf supports adjustable on 2 1
⁄2" increments.
Shelves are designed to support 15 lbs. per square foot, not to exceed 50 lbs. per shelf. Adjustable shelves shall be supported at each corner with a locking clear polycarbonate shelf clip. 30" wide and wider wall cabinet shelves shall also be supported with a non-locking clear polycarbonate shelf clip installed in the cabinet frame center stile (not applicable in butt door cabinets).
2.03.16 All Plywood Construction Wall Shelves All wall cabinets 24" (actual height is 23 1
⁄2") and higher shall have adjustable shelves made of 3
⁄4" thick plywood. Shelves shall be covered on both sides with a moisture- and stain-resis-tant, easy clean natural woodgrain laminate. The front edge shall be laminated with matching edge banding. The cabinet end panels shall be drilled for shelf supports adjustable on 2 1
⁄2" increments. Shelves are designed to support 15 lbs. per square foot, not to exceed 50 lbs. per shelf. Adjustable shelves shall be supported at each corner with a locking clear polycarbonate shelf clip. 30" wide and wider wall cabinet shelves shall also be supported with a non-lock-ing clear polycarbonate shelf clip installed in the cabinet frame center stile (not applicable in butt door cabinets).
2.03.17 Standard Toeboard Backers Toeboard backers shall be a minimum of 1/2" thick engineered wood extending from the floor to the cabinet bottom. This not only sup-
ports the bottom but also effectively seals the toespace against vermin and insects.
2.03.18 All Plywood Construction Toeboard Backers Toeboard backers shall be a minimum of 1/2" thick plywood extending from the floor to the cabinet bottom. This not only supports the cabi-net bottom but also effectively seals the toespace against vermin and insects.
2.03.19 Special Base Cabinets Base Corner Revolving and Base Lazy Susan cabinets have two 28" diameter revolving high impact white plastic shelves with reinforced bottoms, to provide 7.5 square feet of storage, with finger-tip accessibility. Base Corner Revolving Wood Lazy Susan cabinets have two 32" diameter revolving plywood shelves.
Base Corner Revolving and Base Corner Revolving Wood Lazy Susan cabinets shelves rotate independently. Base Lazy Susan cabinet shelves rotate together with the pie-cut door attached.
Shelves are designed to support 15 lbs. per square foot, not to exceed 50 lbs. per shelf.
2.04 Drawer Construction 2.04.01 Drawer Cores
Standard drawer cores use a 3⁄4 extension side-
mount white epoxy coated dual-captive roller drawer slide system with a load capacity rating of 75 lbs. and shall have 1
⁄2" thick engineered wood sides that are attached to the 1
⁄2" thick engineered wood front and back.
Standard drawer interior height is 3 5⁄8"; base
cabinet inside front-to-back depth is 20 11⁄16".
Drawer core sides, front and back shall be cov-ered on the interior and exterior surfaces with a moisture- and stain-resistant, easy clean natural woodgrain laminate. The top edges of drawer core sides, front and back shall be square and laminated with matching edge banding. Drawer sides shall be rabbeted on each end to receive the front and back. Joints shall be secured with adhesive and staples.
Standard drawers are not available in All Plywood Construction.
2.04.02 Drawer Bottoms Drawer bottoms shall be 1
⁄4" thick engineered wood covered on the interior side only with a moisture-and-stain resistant, easy clean natural woodgrain laminate to match the drawer core. For additional support, drawers 30" and wider shall use a 3
⁄8" thick engineered wood bottom panel covered with matching laminate on the interior side. Bottoms shall be attached to the drawer core with adhesive and staples.
Does not apply to All Plywood Construction.2.04.03 Dovetail Drawers
(Standard with All Plywood Construction)
Framed Cabinet Specifications
Framed Cabinet SpecificationsM6
Fram
ed C
abin
et S
peci
ficat
ions
Dovetail drawers use a full extension concealed under-mount slide system with an integrated SoftAction+™ closing mechanism that allows even fully loaded drawers to close gently. As an added feature, the slide system provides the ability to adjust the drawer up or down at the front corners. Slides have a load capacity rating of 75 lbs.
Drawer cores shall have 3⁄4" thick glued-up solid
hardwood sides, front and back finished on exposed surfaces with a durable sealer and top-coat joined at all four corners with a precision traditional half-blind dovetail joint secured with adhesive. The drawer core bottom panel shall be 3-ply 5.2mm thick plywood finished with a moisture- and stain-resistant, easy clean lami-nate on the interior surface printed to match the drawer core. The bottom panel is captured in a dado on all four edges machined into the sides, front and back. Drawers 30" and wider include a 3
⁄8" thick wood cleat running front-to-back attached to the underside of the drawer bottom panel for additional support. These drawers have a capacity rating of 75 lbs. The drawer side interior height is 3 5
⁄16". Base cabinet inside front-to-back drawer depth is 19 1
⁄4"; vani-ty cabinet inside front-to-back drawer depth is 16 5
⁄16". Vanity space saver cabinet inside front-to-back drawer depth is 13 11
⁄32". 2.04.04 Standard Roll-Out Trays
Most standard base cabinets are available with roll-out trays. Trays use a 3
⁄4 extension white epoxy coated side-mount dual-captive roller drawer slide system with a load capacity rating of 75 lbs.
Tray sides and back shall be 1⁄2" thick engi-
neered wood. Tray sides and back shall be cov-ered on the interior and exterior surfaces with a moisture- and stain-resistant, easy clean natural woodgrain laminate. Top edges of the tray sides and back shall be square and laminated with matching edge banding. The tray sides shall be rabbeted on each end to receive the front and back.
Tray fronts shall be 3⁄4" thick solid hardwood fin-
ished on the front and top surfaces with a tough coating of heat activated conversion varnish which is impervious to household chemicals and shall be rabbeted on each end to receive the bottom sides and along the bottom edge to receive the bottom. All four corners of the tray shall be joined with staples.
The roll-out tray bottom panel shall be 1⁄4" thick
engineered wood covered on the interior side only with a moisture-and-stain resistant, easy clean natural woodgrain laminate to match the tray core. Bottoms shall be attached to the tray core with adhesive and staples.
Interior height is 15⁄8" along all four edges; base
cabinet roll-out tray inside front-to-back depth is 20 11
⁄16".2.04.05 Solid Wood Roll-Out Trays
Note: Available in All Plywood Construction base cabinets only (Arbor Falls II and Whitebay II door styles are not available with All Plywood Construction).
Most All Plywood Construction base cabinets are available with solid wood roll-out trays installed.
Solid wood roll-out trays (ROT) can be purchased separately for field installation.
Trays use a ¾ extension white epoxy coated side-mount dual-captive roller drawer slide sys-tem with a load capacity rating of 75 lbs.
Tray sides and back shall be 1⁄2" thick solid
wood, finished with a durable sealer and top coat. The tray sides shall be rabbeted on each end to receive the front and back.
Tray fronts shall be 3⁄4" thick solid hardwood fin-
ished on the front and top surfaces with a tough coating of heat activated conversion varnish which is impervious to household chemicals. Tray fronts shall be rabbeted on each side to receive the sides and along the bottom edge to receive the bottom panel. All four corners of the tray shall be joined with adhesive and sta-ples.
The tray bottom panel shall be 3-ply 5.2mm thick plywood covered on the interior side with a moisture-and-stain resistant, easy clean natural woodgrain laminate to match the tray core. For additional support, roll-out trays 30" and wider shall use 3
⁄8" thick plywood bottom panel cov-ered with laminate on the interior side that matches the tray core. Bottom shall be attached to the tray core with adhesive and sta-ples.
Interior height is 15⁄8" along all four edges; base
cabinet roll-out tray inside front-to-back depth is 20 11
⁄16". 2.04.06 Deep Roll-out Trays
Most base cabinets are available with deep roll-out trays installed and can be purchased sepa-rately for field installation. Deep roll-out trays shall have 1
⁄2" thick glued-up solid hardwood sides, fronts and backs finished with a durable sealer and topcoat. A 1 15
⁄16" deep scalloped fin-ger pull cutout shall be machined at the tray front mid-point.
Tray side interior height is 3 3⁄16", inside front-to-
back depth is 20 11⁄16". Sides, back and front
are assembled using a half-blind dovetail joint secured with adhesive at all four corners. The tray bottom shall be 3-ply 5.2mm thick plywood with a moisture- and stain-resistant, easy clean
Framed Cabinet Specifications
Framed Cabinet Specifications M7
Framed Cabinet Specifications
natural woodgrain laminate on the interior sur-face printed to match the sides, front and back. The bottom is captured in a dado within the sides, front and back. Deep roll-out trays 30" and wider use a 3
⁄8" thick wood bottom cleat mounted front-to-back attached to the tray bot-tom underside for additional support.
All deep roll-out trays shall use a 3⁄4 extension
white epoxy coated side-mount dual-captive roller drawer slide system except for BSD30B 2DF and BSD36B 2DF cabinets which use a full extension side-mount ball bearing slide system utilizing adjustable rear support adapters. Both systems have a load capacity rating of 75 lbs.
2.04.07 Standard Base Shelves Most base cabinets are available with half-depth or full-depth adjustable shelves. Shelves shall be 3
⁄4" thick engineered wood. Full-depth shelves shall be covered on both sides with a moisture- and stain-resistant, easy clean laminate match-ing the cabinet interior.
Half-depth shelves are laminated on the top sur-face only and not on the underside. The front edge shall be laminated with matching melamine edge banding. Again, half-depth shelves are lami-nated on the top side only. All half-depth shelves 27" wide and wider shall have a matching engi-neered wood support cleat across the front underside for additional strength.
Base cabinet end panels shall be drilled for clear polycarbonate shelf supports on 2 1
⁄2" increments.
Shelves are designed to support 15 lbs. per square foot, not to exceed 50 lbs. per shelf.
2.04.08 All Plywood Construction Base Shelves Most base cabinets are available with half-depth or full-depth adjustable shelves. Shelves shall be 3
⁄4" thick plywood. Full-depth shelves shall be covered on both sides with a moisture- and stain-resistant, easy clean laminate matching the cabinet interior.
Half-depth shelves are laminated on the top sur-face only and not on the underside. The front edge shall be laminated with matching edge banding. Again, half-depth shelves are laminated on the top side only. All half-depth shelves 27" or wider shall have a matching ply-wood support cleat across the front underside for additional strength. Base cabinet end panels shall be drilled for clear polycarbonate shelf sup-ports on 2 1
⁄2" increments. Shelves are designed to support 15 lbs. per
square foot, not to exceed 50 lbs. per shelf. 2.04.09 Drawer & Roll-out Tray Slides
The 3⁄4 extension white epoxy coated side-mount
dual-captive roller drawer slide system shall be used on all standard Merillat drawers, roll-out
trays, solid wood trays for All Plywood Construction and deep roll-out trays. The system shall consist of a pair of 1.25mm steel slides that roll on close-tolerance nylon wheels.
The support channel half of the slide system shall be mounted to the front frame of the cabi-net with a screw and into an adjustable plastic rear mounting bracket on the interior side of the cabinet back panel.
The drawer and tray core half of the slide system shall be attached to the front and back of the core with screws. The “L” shaped bottom of this member wraps around the bottom of the core to reinforce it and provide a finished edge.
This dual-captive epoxy coated steel drawer sys-tem and integrated rear mounting bracket sup-ports the drawer and roll-out tray to a load capacity rating of 75 lbs. All slides have a life-time limited guarantee to the original purchaser.
2.05 Door and Drawer Front Construction2.05.01 Avenue Doors
Avenue doors have 3⁄4" x 2 3
⁄16" frame compo-nents hand selected for uniform and pleasing grain patterns. These solid wood stiles and rails are joined at each corner with open mortise-and-tenon joints bonded with adhesive.
The outside front edges of the frame are slightly beveled and the back edges are rounded. Frame inside edges are beveled at 25º as an added visual effect.
The flat center panel is 5⁄32" thick plywood with
plain-sliced cherry or maple veneer and decora-tive vertical v-grooves spaced on 1 1
⁄2" centers on the face side. The center panel is retained by a groove machined in the frame stiles and rails. Doors shall have pliable bumpers to dampen clo-sure noise.
2.05.02 Avenue Drawer Avenue drawer fronts shall be 3
⁄4" thick glued-up solid wood selected for uniform and pleasing grain patterns. The outside front edges are slightly beveled and the back edges are round-ed.
Drawer fronts shall have pliable bumpers to dampen closure noise.
2.05.03 Avenue w/5-Piece Drawer Avenue with 5-Piece Drawer Front Option drawer fronts have 3
⁄4" x 2 3⁄16" frame components
hand selected for uniform and pleasing grain patterns. These solid wood stiles and rails are joined at each corner with open mortise-and- tenon joints bonded with adhesive.
The outside front edges of the frame are slightly beveled and the back edges are rounded. Frame inside edges are beveled at 25º as an added visual feature.
The flat center panel is 7⁄16" thick-48 lb. density
engineered wood with plain-sliced veneer and
Framed Cabinet Specifications
Framed Cabinet SpecificationsM8
Fram
ed C
abin
et S
peci
ficat
ions
decorative vertical v-grooves spaced on 1 1⁄2"
centers on the face side. The panel has molded edges retained by a groove machined in the inside edges of the drawer front frame.
Drawer fronts shall have pliable bumpers to dampen closure noise. Desk Knee Drawer (DKD) and Desk Knee Drawer Trimmable (DKDT) fronts shall be 3
⁄4" thick glued-up solid wood selected for uniform and pleasing grain patterns. The outside front edges are slightly beveled and the back edges are rounded.
2.05.04 Arbor Falls II & Whitebay II Doors and Drawers Arbor Falls II and Whitebay II doors and drawer fronts are 3
⁄4" thick-52 lb. furniture grade Medium Density Fiberboard (MDF). The one-piece MDF is precision machined to exact tolerances. The component is laminated on the front side with a 12 mil vinyl foil that is thermo-formed to the door and drawer front face. The back of the component is laminated with water and abrasion resistant white melamine. Both surfaces have been developed to provide the maximum opacity and resistant to abrasion, water and household chemicals and yellowing. Arbor Falls II doors and drawer fronts have an integrated finger pull on all four edges making decorative hardware optional. Whitebay II doors and drawer fronts have a 90° return with no bevel requiring decora-tive hardware.
2.05.05 Fox Harbor, Spring Valley, Seneca Ridge and Sutton Cliffs Doors Fox Harbor, Spring Valley, Seneca Ridge and Sutton Cliffs doors shall have 3
⁄4" thick x 2 3⁄16"
wide frame components hand selected for uni-form and pleasing grain patterns. These solid hardwood stiles and rails shall be joined at the four corners with open mortise-and-tenon joints. The joints shall be bonded with adhesive.
The frame shall be molded with a single bead detail on the inside edges and a coved/reverse bevel of 15° shall be machined on the top and bottom edges to serve as a finger grip. Sides shall have a square edge profile.
Spring Valley stained finishes will have a 5⁄32"
thick plywood flat center panel with plain-sliced red oak, cherry, hickory or maple veneer on the face side that is retained by a groove machined in the frame. Spring Valley Cotton and Chiffon finished center panels will be either painted maple veneered plywood or Medium Density Fiberboard (MDF).
Seneca Ridge will have a raised plain-sliced veneer red oak, cherry or maple center panel that consists of engineered wood core with its edges machined in a coved shape. The front and back of the panel shall be covered with select hardwood veneers. The veneer shall be bonded to the substrate using adhesive, heat and pres-
sure. Sutton Cliffs will have a raised center panel and
shall consist of a 5⁄8" solid hardwood glued-up
panel with its edges machined in a coved shape. The panel is retained by a groove machined in the inside edge of the door frame.
Prior to assembly of the door frame, foam expan-sion pads are placed in the grooves of the rails and stiles. This construction shall provide a strong door that resists the expansion, shrink-age and splitting associated with other types of raised panels.
As with all solid wood products, grain and wood color variations are inherent properties of wood. Doors shall have pliable bumpers to dampen clo-sure noise. Note: Arch wall cabinets are available and can be used with square raised panel base cabinets to design a more elegant, formal kitchen. Arch doors are constructed the same as the square raised panel doors, except for a 3 3
⁄16" (arch wid-est point) top rail which is shaped in a single arch configuration. The raised center panel is machined to match. Seneca Ridge, Sutton Cliffs and Spring Valley arch doors are also available on the top door of most tall cabinets.
2.05.06 Glen Arbor, Spring Valley, Seneca Ridge and Sutton Cliffs Drawers Glen Arbor, Spring Valley, Seneca Ridge and Sutton Cliffs drawer fronts shall be 3
⁄4" thick glued-up, solid hardwood selected for uniform and pleasing grain patterns.
Drawer fronts have a coved/reverse bevel machined on the top and bottom edges to serve as a finger grip making decorative hardware optional. Sides shall be machined with a cove/square edge profile. Drawer fronts shall have pli-able bumpers to dampen closure noise.
2.05.07 Fox Harbor Drawer Fox Harbor drawer fronts shall be 3
⁄4" thick glued-up, solid hardwood selected for uniform and pleasing grain patterns.
Drawer fronts have a decorative single bead pro-file with a 90º return on all four perimeter edges, requiring decorative hardware. Drawer fronts shall have pliable bumpers to dampen closure noise.
2.05.08 Ralston Drawer Ralston drawer fronts shall be 3
⁄4" thick glued- up, solid hardwood selected for uniform and pleasing grain patterns. Drawer fronts have a decorative double bead profile with a 90º return on all four perimeter edges, requiring decorative hardware. Drawer fronts shall have pliable bumpers to dampen closure noise.
2.05.09 Ralston w/5-Piece Drawer Ralston standard height 5-Piece Drawer Front Option drawer fronts have ¾” x 3” stiles and
Framed Cabinet Specifications
Framed Cabinet Specifications M9
Framed Cabinet Specifications
¾” x 1 ½” rails hand selected for uniform and pleasing grain patterns. These solid wood drawer front frames are joined at each corner with open mortise-and-tenon joints secured with adhesive and pins.
The outside and inside frame edges shall have a double bead profile with a 90° return on all four perimeter edges, requiring decorative hard-ware.
The flat center panel is glued-up solid wood with molded edges retained by a groove machined in the inside edges of the drawer front frame.
Drawer fronts shall have pliable bumpers to dampen closure noise. Desk Knee Drawer (DKD) and Desk Knee Drawer Trimmable (DKDT) drawer fronts shall be constructed the same as standard height drawer fronts. Drawer fronts 9 ¾” tall and taller shall be con-structed the same as the standard height draw-er fronts except the frame stiles and rails shall both be 3” wide. As with all solid wood prod-ucts, grain and wood color variations are inher-ent of wood.
2.05.10 Ralston Doors Ralston doors have ¾” x 3” stile and rail frame
components hand selected for uniform and pleasing grain patterns. These solid wood stiles and rails are joined at each corner with open mortise-and-tenon joints secured with adhesive and pins. The outside and inside frame edges shall have complimenting double bead profiles with a 90° return on all four perimeter edges, requiring decorative hardware.
The flat center panel is 5⁄32" thick plywood with
plain-sliced veneer on the face side and is retained by a groove machined in the inside edges of the door frame.
Doors shall have pliable bumpers to dampen closure noise.
2.05.11 Somerton Hill Doors Somerton Hill doors shall have ¾" thick x 2 3
⁄16" wide frame components hand selected from uniform and pleasing grain patterns. These solid hardwood stiles and rails shall be joined at the four corners with open mortise-and tenon joints. The joints shall be bonded with adhesive.
The frame shall be molded with a single bead detail on the inside edges and a decorative two-step profile with a 90º return on all four perimeter edges, requiring decorative hardware.
The raised center panel shall consist of a 5⁄8"
thick solid hardwood glued-up panel with its perimeter edges machined in a decorative coved shape with a decorative bead. The panel shall be retained by a groove machined in the inside edges of the door frame.
Prior to assembly of the door frame, foam expan-sion pads are placed in the grooves of the stiles and rails. This construction provides a strong door that resists the expansion, shrinkage and splitting associated with other types of raised panels.
As with all solid wood products, grain and wood color variations are inherent properties of wood. Doors shall have pliable bumpers to dampen clo-sure noise.
Note: Arch wall cabinets are available and can be used with square raised panel base cabinets to design a more elegant, formal kitchen. Arch doors are constructed the same as the square raised panel doors, except for a 3 3
⁄16" (arch wid-est point) wide top rail which is shaped in a sin-gle arch configuration. The raised center panel is machined to match. Somerton Hill arch doors are also available on top doors of most tall cabinets.
2.05.12 Somerton Hill Drawer Somerton Hill drawer fronts shall be 3
⁄4" thick glued-up, solid hardwood selected for uniform and pleasing grain patterns. Drawer fronts have a decorative two-step profile with a 90º return on all four perimeter edges, requiring decorative hardware. Drawer fronts shall have pliable bum-pers to dampen closure noise.
2.05.13 Cannonsburg, Portrait and Tolani Doors Portrait doors shall have ¾” x 2 3
⁄16" stile and rail frame components hand selected for uniform and pleasing grain patterns. Cannonsburg and Tolani doors shall have ¾” x 2 7
⁄8" hand selected frame components. These solid wood stiles and rails are joined at each corner with open mortise-and-tenon joints secured with adhesive and pins.
The outside front edges of the frame are slightly beveled and the back edges are rounded. Portrait and Tolani frame inside edges are bev-eled at 25° as an added visual feature.
All three doors have a flat center panel which is 5
⁄32” thick plywood with plain-sliced veneer on the face side and is retained by a groove machined in the inside edges of the door frame. Cannonsburg doors shall have a matching deco-rative molding frame with mitered corners secured to the face of the center panel with glue and with pins through the back of the center panel eliminating unsightly pin holes on the face of the molding. The molding is 15
⁄16" wide x 5⁄8"
thick with a multiple beaded profile. The miter joints of the molding frame are secured with two v-shaped nails in each corner.
Doors shall have pliable bumpers to dampen clo-sure noise.
2.05.14 Cannonsburg, Portrait and Tolani Drawer Cannonsburg, Portrait and Tolani drawer fronts shall be 3
⁄4" thick glued-up solid wood selected for uniform and pleasing grain patterns. The out-
Framed Cabinet Specifications
Framed Cabinet SpecificationsM10
Fram
ed C
abin
et S
peci
ficat
ions
side front edges are slightly beveled and the back edges are rounded.
Drawer fronts shall have pliable bumpers to dampen closure noise.
2.05.14.5 Tolani w/3-Piece Drawer Tolani with 3-Piece Drawer Front Option drawer
fronts shall be made from ¾” thick solid wood selected from uniform and pleasing grain pat-terns. The center section shall have horizontal grain and the 2 7/8” wide end stiles shall have vertical grain for an added visual feature. The center section and stiles shall be joined with open mortise-and-tenon joints bonded with adhesive and secured with pins on the backside just like a Tolani door stile/rail joint.
The outside front edges are slightly beveled and the back edges are rounded.
Drawer fronts shall have pliable bumpers to dampen closure noise.
2.05.15 Cannonsburg w/5-Piece Drawer Cannonsburg with 5-Piece Drawer Front Option standard height drawer fronts shall have ¾” thick solid wood frames consisting of 2 7
⁄8" wide stiles and 1 ½” wide rails hand selected for uni-form and pleasing grain patterns. Drawer fronts 9 ¾” tall and taller shall have 2 7
⁄8" wide stiles and rails. These stiles and rails are joined at each corner with open mortise-and-tenon joints secured with adhesive and pins. The outside front edges of the frame are slightly beveled and the back edges are rounded.
The flat center panel is glued-up solid wood with molded edges retained by a groove machined in the inside edges of the drawer front frame. These same drawer fronts shall have a match-ing decorative molding frame with mitered cor-ners secured to the face of the center panel with glue and with pins through the back of the center panel eliminating unsightly pin holes on the face of the molding. The molding is 15
⁄16" wide x 5
⁄8" thick with a multiple beaded profile. The miter joints of the molding frame are secured with two v-shaped nails in each corner. Desk Knee Drawer (DKD) and Desk Knee Drawer Trimmable (DKDT) drawer fronts shall be ¾” thick glued-up solid wood selected for uniform and pleasing grain patterns. Drawer fronts shall have pliable bumpers to dampen closure noise. The outside front edges are slightly beveled and the back edges are rounded.
As with all solid wood products, grain and wood color variations are inherent of wood.
2.05.16 Fusion Doors Fusion doors shall be constructed of 3
⁄4" thick engineered wood laminated on two sides with maple or cherry “A” grade, plain sliced veneer. Grain direction to be vertical on front and back sides.
The edges shall be laminated with matching 3.0 millimeter thick, 6-ply veneer edge banding. Edge banding on the vertical edges of doors shall run full-length and overlap the edges of the horizontal edge banding. Finger joints shall be permitted in the edge banding. Sharp edges are broken during finish sanding.
Wall Glass Doors shall have 3⁄4" x 2 3
⁄16" solid maple or cherry frame components hand select-ed for uniform and pleasing grain patterns. These frame stiles and rails shall be joined at each corner with open mortise-and-tenon joints bonded with adhesive and secured with pins. The outside and inside edges are profiled the same as Portrait doors with the front outside edges slightly beveled, the back outside edges rounded and the inside edges beveled at 25º as an added visual feature.
All doors shall have pliable bumpers to dampen closure noise.
2.05.17 Fusion Drawers Fusion drawer fronts have the same veneered construction as Fusion doors except the grain direction runs horizontally on both sides and edge banding on the horizontal edges shall run full-length overlapping the edges of the vertical edge banding which is the reverse of the door. Drawer fronts shall have pliable bumpers to dampen closure noise.
2.05.18 Lariat Doors Lariat doors have 3
⁄4" x 2 1⁄2" wide solid wood
frame components selected for uniform and pleasing grain patterns. These solid wood stiles and rails shall be joined at the four corners with mitered joints secured with adhesive and a full-length metal fastener. A decorative bead shall be molded around both the inside and outside frame perimeter. Recessed next to the inside bead is a half-round 3
⁄8" wide wood rope molding mitered at the corners and secured with pins. The remaining front surface of the frame is flat. The flat center panel is 5
⁄32" thick plywood with plain-sliced cherry or maple veneer on the face side and is retained by a groove machined in the frame components.
Lariat doors cannot be field modified for glass panels due to the full-length metal fasteners used to secure each miter joint. Doors shall have pliable bumpers to dampen closure noise.
2.05.19 Lariat Drawers Lariat drawer fronts have 3
⁄4" x 2 1⁄2" wide solid
wood frame components selected for uniform and pleasing grain patterns. These solid wood stiles and rails shall be joined at the four corners with mitered joints secured with adhesive and corrugated nails. A decorative bead shall be molded around both the inside and outside frame perimeter. Recessed next to the inside bead is a
Framed Cabinet Specifications
Framed Cabinet Specifications M11
Framed Cabinet Specifications
half-round 3⁄8" wide wood rope molding mitered
at the corners and secured with pins. The remaining front surface of the frame is flat.
The flat center panel is glued-up solid wood with molded edges retained by a groove machined in the inside of the drawer front frame. Prior to assembly of the drawer front frame, pliable spacers are placed in the rail and stile grooves. This construction provides a strong drawer front that resists the expansion, shrinkage and split-ting associated with other types of solid center panels. Desk Knee Drawer (DKD) and Desk Knee Drawer Trimmable (DKDT) fronts shall be constructed the same except the frame is 1 1
⁄2" wide. Drawer fronts shall have pliable bumpers to dampen closure noise.
2.05.20 Bayville Doors Bayville doors have 3
⁄4" x 2 1⁄2" wide solid wood
frame components selected for uniform and pleasing grain patterns. These solid wood stiles and rails shall be joined at the four corners with mitered joints secured with adhesive and a full-length metal fastener. A decorative bead shall be molded around both the inside and outside frame perimeter, along with a domed profile con-necting the two beads.
The flat center panel is 5⁄32" thick plywood with
plain-sliced cherry or maple veneer on the face side and is retained by a groove machined in the frame components.
Bayville doors cannot be field modified for glass panels due to the full-length metal fasteners used to secure each miter joint. Doors shall have pliable bumpers to dampen closure noise.
2.05.21 Bayville Drawers Bayville drawer fronts have 3
⁄4" x 2 1⁄2" wide
solid wood frame components selected for uni-form and pleasing grain patterns. These solid wood stiles and rails shall be joined at the four corners with mitered joints secured with adhe-sive and corrugated nails. A decorative bead shall be molded around both the inside and out-side frame perimeter, along with a domed pro-file connecting the two beads.
The flat center panel is glued-up solid wood with molded edges retained by a groove machined in the inside of the drawer front frame.
Desk Knee Drawer (DKD) and Desk Knee Drawer Trimmable (DKDT) fronts shall be con-structed the same except the frame is 1 1
⁄2" wide. Drawer fronts shall have pliable bumpers to dampen closure noise.
2.05.22 Bellingham and LaBelle Doors Bellingham and LaBelle doors have 3
⁄4" x 2 3⁄16"
wide solid wood frame components selected for uniform and pleasing grain patterns. These solid wood stiles and rails shall be joined at the four corners with mitered joints secured
with adhesive and a full-length metal fastener. A decorative double bead shall be molded around the inside frame perimeter and a deco-rative single bead shall be molded around the outside frame perimeter. The remaining front surface of the frame is flat. LaBelle raised cen-ter panel shall consist of a 7
⁄16" solid hardwood glued-up panel with its edges machined in a beveled shape. The panel is retained in a groove machined in the inside edges of the door frame.
Prior to assembly of the door frame, pliable spacers are placed in the frame grooves. This construction shall provide a strong door that resists the expansion, shrinkage and splitting associated with others types of raised panels. Bellingham doors have a flat center panel that is 5
⁄32" thick plywood with plain-sliced cherry or maple veneer on the face side and is retained by a groove machined in the frame components. As with all solid wood products, grain and wood color variations are inherent of wood. Bellingham and LaBelle doors cannot be field modified for glass panels due to the full-length metal fasteners used to secure each miter joint. Doors shall have pliable bumpers to dampen closure noise.
2.05.23 Bellingham and LaBelle Drawers Bellingham and LaBelle drawer fronts have 3
⁄4" x 2 3⁄16" wide solid wood frame components
selected for uniform and pleasing grain pat-terns. These solid wood stiles and rails shall be joined at the four corners with mitered joints secured with adhesive and corrugated nails. A decorative double bead shall be molded around the inside frame perimeter and a decorative sin-gle bead shall be molded around the outside frame perimeter. The remaining front surface of the frame is flat.
Standard height drawer fronts shall have a recessed flat center panel of glued-up solid wood with molded edges retained by a groove machined in the inside edges of the drawer front frame.
LaBelle deep drawer fronts found on cabinets like BD -3D and BD -4D have a raised center panel consisting of a 3
⁄4" solid hardwood panel with its edges machined in a beveled shape and is also retained in a groove machined in the inside edges of the drawer front frame. Prior to assembly of the LaBelle drawer front frame, pli-able spacers are placed in the rail and stile grooves providing a strong drawer front assem-bly that resists the expansion, shrinkage and splitting associated with other types of solid center panels.
Desk Knee Drawer (DKD) and Desk Knee Drawer Trimmable (DKDT) fronts shall be con-
Framed Cabinet Specifications
Framed Cabinet SpecificationsM12
Fram
ed C
abin
et S
peci
ficat
ions
structed the same way as standard height drawer fronts with a recessed flat center panel except the frame is 1 1
⁄2" wide. Drawer fronts shall have pliable bumpers to dampen closure noise.
As with all solid wood products, grain and wood color variations are inherent of wood.
2.05.24 Glen Arbor Doors Glen Arbor doors have 3
⁄4" x 2 3⁄16" wide solid
wood frame components selected for uniform and pleasing grain patterns. These solid wood stiles and rails shall be joined at the four cor-ners with mitered joints secured with adhesive and a full length metal fastener. A decorative double bead shall be molded around the inside frame perimeter and coved/90º return shall be machined around the perimeter of all four edges. Decorative hardware is optional.
Glen Arbor doors have a flat center panel that is 5
⁄32" thick plywood with plain-sliced red oak, cherry or maple veneer on the face side and is retained by a groove machined in the frame components. Glen Arbor doors cannot be field modified for glass panels due to the full-length metal fasteners used to secure each miter joint. Doors shall have pliable bumpers to dampen clo-sure noise.
As with all solid wood products, grain and wood color variations are inherent of wood.
2.06 Hinges All hinges have a lifetime limited guarantee to the original purchaser.
2.06.01 All doors shall be mounted on concealed, nickel-finished self-closing hinges. Door hinges will self-close within 10º of cabinet face.
Maximum hinge opening angle for Arbor Falls II, Glen Arbor, Spring Valley, Seneca Ridge and Sutton Cliffs is 105º. Maximum hinge opening angle for Avenue, Bayville, Bellingham, Cannonsburg, Fox Harbor, Fusion, LaBelle, Lariat, Ralston, Portrait, Somerton Hill, Tolani and Whitebay II is 107º.
All hinges shall have six-way (vertical, horizontal and front-to-back) adjustability except for 42" high Wall -- MG and PM, -- PR and PP and -- GD and PG, Wall Angle -- MG and PM, -- PR and PP and -- GD and PG and Wall Corner Angle -- MG and PM, -- PR and PP and -- GD and PG cabinets. In order to allow the center shelf to be posi-tioned behind the door mullion in the middle of the cabinet, two-way (vertical only) adjustable hinges shall be used on Arbor Falls II, Glen Arbor, Spring Valley, Seneca Ridge and Sutton Cliffs 42" high Wall -- MG and PM and Wall Corner -- MG and PM cabinets.
Maximum opening angle of two-way adjustable hinges is 105º. Four-way (vertical and horizontal only) adjustable hinges shall be used on 42"
high Avenue, Portrait and Tolani Wall -- PR and Wall Corner -- PR cabinets; Somerton Hill, Ralston, Fox Harbor, and Whitebay II Wall -- MG and Wall Corner -- MG cabinets; Bellingham, Cannonsburg, Fusion, LaBelle and Lariat 42" high Wall -- GD and Wall Corner -- GD cabinets. Maximum opening angle of four-way adjustable hinges is 110º. All Wall Angle -- MG, -- PR, -- GD 42" high cabinets shall use the same two-way adjustable hinges as mentioned previously in order to also allow the center shelf to be posi-tioned in the cabinet middle.
2.07 Stain Finishes2.07.01 Seneca Ridge Oak and Spring Valley Oak
cabinets are available in Amaretto, Kona, Natural and Pecan stain finishes.
Sutton Cliffs Oak cabinets are available in Amaretto, Kona, Natural and Pecan stain finishes only.
Portrait Oak cabinets are available in Amaretto, Kona, and Pecan stain finishes only. Avenue Cherry, Bellingham Cherry, Fusion Cherry, LaBelle Cherry, Lariat Cherry, Portrait Cherry, Spring Valley Cherry, Seneca Ridge Cherry, Somerton Hill Cherry, Sutton Cliffs Cherry and Tolani Cherry cabinets are available in Amaretto, Cider, Paprika and Pecan stain finishes.
Spring Valley Hickory and Sutton Cliffs Hickory cabinets are available in Natural stain finish. Avenue Maple, Fusion Maple, LaBelle Maple, Portrait Maple, Spring Valley Maple, Seneca Ridge Maple, Somerton Hill Maple, Sutton Cliffs Maple and Tolani Maple are available in Chiffon and Cotton (painted), Dusk, Hazelnut, Kona, Natural, Pecan, Sable, Sedona, and Toffee stain finishes, except Lariat Maple which is not avail-able in Chiffon or Cotton.
All stains contain pigments that accentuate the grain. Components are control-sanded to prepare the surface for staining. The penetrating stains are applied with a variety of specially designed spray equipment (door and drawer fronts), mechanical spray devices, (frames) or hand-spray equipment (accessories) tailored specifically to the type of part being finished. The stain is brush-wiped into the pores to develop the desired color.
A sealer is then applied over the stain. The seal-er helps develop a bond to the stain as well as the topcoat. The sealer is the foundation of the protecting finish; helping to prevent warping and cracking of the hardwood. The sealer is carefully and thoroughly sanded to prepare the surface for topcoating. The heat activated catalyzed conver-sion topcoat creates a durable envelope protect-ing the wood from chemicals, abrasion, and detergents. The conversion topcoat provides a full, smooth
Framed Cabinet Specifications
Framed Cabinet Specifications M13
Framed Cabinet Specifications
surface for a complete quality finish. The Chiffon and Cotton painted finishes consist of several coats of pigmented semi-opaque enamel paint which saturate the wood for a rich, beautiful color while allowing some of the natural beauty of the grain to remain visible.
A heat activated catalyzed conversion topcoat is applied creating a durable envelope protecting the painted finish from chemicals, abrasion and detergents. The characteristics of the wood are less noticeable with painted finishes than with stain finishes. Because wood naturally expands and contracts, you may see hairline cracks in the finish surface at the joints. Joint lines are normal and do not affect the strength of the face frame's, door's or drawer front's construction or finish.
2.07.02 Glaze Finishes Bellingham, LaBelle, Lariat and Somerton Hill cabinets are available in various glaze combina-tion finishes. Bellingham Cherry, LaBelle Cherry, Lariat Cherry and Somerton Hill Cherry cabinets are available in Amaretto with Java (dark brown) Glaze, Cider with Java (dark brown) Glaze and Paprika with Ebony (black) Glaze. Bellingham Maple, LaBelle Maple, Lariat Maple and Somerton Hill Maple cabinets are available in Chiffon with Tuscan (light gray) Glaze (painted), Cotton with Tuscan (light gray) Glaze (painted), Chiffon with Desert (brown) Glaze (painted), Hazelnut with Java (dark brown), Natural with Java (dark brown) Glaze, Sable with Ebony (black) Glaze, Toffee with Java (dark brown) Glaze.
All contain pigments that accentuate the wood grain. Components are control-sanded to prepare the surface for staining. The penetrating stains are applied with hand held spray equipment to develop the desired color.
A sealer is then applied over the stain. The seal-er helps develop a bond to the stain as well as the glaze material. The sealer is the foundation of the protecting finish, helping to prevent warp-ing and cracking of the hardwood. The sealer is carefully and thoroughly sanded to prepare the surface for glazing. The heat activated catalyzed conversion topcoat creates a durable envelope protecting the wood from chemical, abrasion and detergents.
The glaze material is applied to the face side only over the sealer-creating hang up in corner areas and in profiled recesses depending on the door style.
The conversion topcoat provides a full smooth surface for a complete quality finish. The Chiffon and Cotton painted finish consists of several coats of pigmented semi-opaque enamel paint which saturate the wood for a rich, beautiful color while allowing some of the natural beauty of the grain to remain visible.
The glaze material is applied to the face side only over the paint creating hang-up in the corner areas and in the profiled recesses depending on the door style.
A heat activated catalyzed conversion topcoat is then applied creating a durable envelope protect-ing the painted finish from chemicals, abrasion and detergents. Merillat uses solid wood as the base material for painted finishes, whereas some other cabinetry manufacturers use engineered wood. The characteristics of the wood are less noticeable with painted finishes than with stained finishes. Because wood naturally expands and contracts, you may see hairline cracks in the finish surface at the joints. Joint lines are normal and do not affect the strength of the face frame's, door's or drawer front's construction or finish.
2.07.03 Finish Accent Glaze In addition to the standard finishes (Chiffon, Cotton, Kona, Natural, Sable, Sedona and Toffee), Seneca Ridge and Spring Valley Maple cabinets are also available in various accent glaze combi-nation finishes. They are Chiffon with Tuscan (light gray) Accent (painted), Cotton with Tuscan (light gray) Accent (painted), Chiffon with Desert (medium brown) Accent (painted), Hazelnut with Java (dark brown) Accent; Natural with Java (dark brown) Accent; Sable with Ebony (black) Accent; Sedona with Ebony (black) Accent; Toffee with Java (dark brown) Accent. All contain pigments that accentuate the wood grain.
Components are control-sanded to prepare the surface for staining. The penetrating stains are applied with a variety of specifically designed spray equipment tailored specifically to the type of part being finished. The stain is brushed-wiped into the pores to develop the desired color. A sealer is then applied over the stain.
The sealer helps develop a bond to the stain as well as the topcoat. The sealer is the foundation of the protecting finish; helping to prevent warp-ing and cracking of the hardwood. The sealer is carefully and thoroughly sanded to prepare the surface for topcoating and glazing.
The accent glazing material is hand applied to specific profiles depending on door style and then cured.
Finally, the heat activated catalyzed conversion topcoat is applied creating a durable envelope protecting the accent glaze and wood from chemi-cals, abrasion and detergents. The conversion topcoat provides a full, smooth surface for a com-plete quality finish.
The Chiffon and Cotton painted finishes consist of several coats of pigmented semi-opaque enamel paint which saturate the wood for a rich, beautiful color while allowing some of the natural beauty of the grain to remain visible. Merillat
Framed Cabinet Specifications
uses solid wood as the base material for painted finishes, whereas some other cabinetry manufac-turers use engineered wood. The characteristics of the wood are less noticeable with painted fin-ishes than with stained finishes. Because wood naturally expands and contracts, you may see hair-line cracks in the finish surface at the joints. Joint lines are normal and do not affect the strength of the face frame's, door's or drawer front's construc-tion or finish.
2.07.04 Some Merillat accessory items shall be topcoated with lacquer.
3.01 Fire Resistance3.01.01 Overlaid engineered wood used for cabinet con-
struction has been tested in accordance with UL standard recognized-ASTM E 162-90-Standard Test Method for Surface Flammability of Materials, using a radiant heat energy source, and HUD Standard 3280.203, .204 and .209.
4.01 Formaldehyde Emissions Levels4.01.01 Formaldehyde emissions comply with require-
ments of 24 CFR, Part 3280 (August 9, 1984), the HUD rule on Manufactured Home Construction and Safety Standards and 29 CFR Part 1910 (May 27, 1992), the OSHA rule on Occupational Exposure to Formaldehyde.
4.01.02 Formaldehyde emissions for raw engineered wood is restricted to 0.3 parts per million.
5.01 Installation5.01.01 Contractor shall verify all on-site dimensions and
notify supplier of any variances or changes.5.01.02 Install cabinets as indicated on the drawings.
Install plumb and level with all joints tight, in accordance with instructions shipped with sink base and vanity bowl cabinets.
5.01.03 Shim cabinets as required and trim with molding to match cabinets.
5.01.04 Secure to walls with screws embedded one inch minimum in solid wood framing or blocking.
and plumb. For further information, send to Merillat for a
Cabinetry Selection Guide. (Masco Cabinetry LLC, P. O. Box 1946, Adrian, MI 49221). In keeping with our policy of continuous refinement, Masco Cabinetry LLC reserves the right to alter specifications and styles without gen-eral notice or obligation to make similar changes in products previously manufactured.
WARNING: This product contains chemicalsknown to the State of California to cause cancer.
Framed Cabinet SpecificationsM14
Fram
ed C
abin
et S
peci
ficat
ions
Framed Cabinet Specifications
CODE PAGE CODE PAGE CODE PAGE CODE PAGE CODE PAGE
1 12 C10
15 C10
18 C10
1FT C12
1ST C11
2 21 C10
24 C10
2DF C13
2DT C12
2FT C12
2ST C11
3 3 C15
3ST C11
4 4DT C13
4ST C11
5 5 C15
6 6DT C13
6ST C12
9 9 C10
A ACCESSDFAB15 L4
ACCESSDFAVB12 L4
ACCESSDFAW1530 L4
ACM8 K5
ACM8-6 K5
ACM8-6-UF K5
ACM8-UF K5
AGTD24 D14
AGTD27 D14
AGTS18 D14
AGTS24 D14
AGTS30 D14
AOSC8 K3
AOSC8-25 K3
ARJVZ B2
ARNON B1
B B12 E1
B1212FH E1
B12FH E1
B15 E1
B1512FH E1
B15FH E1
B18 E1
B1812FH E1
B18FH E1
B21 E1
B2112FH E1
B21FH E1
B24 E1
B2412BFH E2
B2412FH E1
B24B E2
B24BFH E2
B24FH E1
B2712BFH E2
B27B E2
B27BFH E2
B30 E2
B3012BFH E2
B3012FH E2
B30B E2
B30BFH E2
B30FH E2
B33 E2
B33B E2
B33BFH E2
B33FH E2
B36 E2
B36B E2
B36BFH E2
B36FH E2
B39 E2
B39FH E2
B42 E2
B42FH E2
B45 E2
B45FH E2
B48 E2
B48FH E2
B54 E3
B9FH E1
BAR36 E20
BB3-2434 E33
BB6-2434 E33
BBC36/39 BR or BL E16
BBC39/42 BR or BL E16
BBC42/45 BR or BL E16
BBC45/48 BR or BL E16
BBC48/51 BR or BL E16
BC3-1534 E33
BC3-2734 E33
BC6-1534 E33
BC6-2734 E33
BCA24BFH E19
BCD24 DR or DL-4D E5
BCD30 DR or DL-4D E5
BCD36 DR or DL-4D E5
BCF6-1534 E34
BCF6-2734 E34
BCFS36 E19
BCR33 E18
BCR36 E18
BCR36WLS E18
BD12-3D E5
BD12-4D E5
BD15-3D E5
BD15-4D E5
BD18-3D E5
BD18-4D E5
BD21-3D E5
BD21-4D E5
BD24-3D E5
BD24-4D E5
BD27-3D E5
BD27-4D E5
BD30-3D E5
BD33-3D E5
BD36-3D E5
BDTK12 J7
BDTK15 J7
BDTK18 J7
BDTK21 J7
BDTK24 J7
BDTK27 J7
BDTK27B J7
BDTK30B J7
BDTK30B-SMFE J8
BDTK33 J7
BDTK33B J7
BDTK33B-SMFE J8
BDTK36B J7
BDTK36B-SMFE J8
BDTK39 J7
BDTK45 J7
BEA12FH R or L E21
BEC24FH E20
BEP E34
BEP-6 E34
BEPF3-34 E34
BEPF3-34-2 E34
BEPF6-34 E34
BF3 E31
BF6 E31
BFC3 E32
BFF3 E31
BFOLC3 E33
BFP3 E32
BFP6 E32
BK1524 D10
BK1530 D10
BK1536 D10
BK1539 D10
BK1542 D10
BK1824 D10
BK1830 D10
BK1836 D10
BK1839 D10
BK1842 D10
BK1848 D10
BK1854 D10
BK1860 D10
BK2124 D10
BK2130 D10
BK2136 D10
BK2139 D10
BK2142 D10
BK2148 D10
BK2154 D10
BK2160 D10
BK2424 D10
BK2430 D10
BK2436 D10
BK2439 D10
BK2442 D10
BK2448 D10
BK2454 D10
BK2460 D10
BK3012 D10
BK3612 D10
BLS36 E17
BMC24 E22
BMC27 E22
BMC30 E22
BOCU30 E22
BOCU33 E22
BPO9 E6
BPPS27-2D E4
BPPS30-2D E4
BPPS33-2D E4
BPPS36-2D E4
BSD30B E3
BSD36B E3
BSOS42 E26
BSOS42-3 E26
BSOS45 E26
BSOS45-3 E26
BTK12 J7
BTK15 J7
BTK18 J7
BTK18DF J7
BTK21 J7
BTK21DF J7
BTK24 J7
BTK24DF J7
BTK27 J7
BTK27B J7
BTK27BDF J7
BTK30B J7
BTK30BDF J7
BTK33 J7
BTK33B J7
BTK36/39 J7
BTK36B J7
BTK39 J7
BTK45 J7
BWBFMK E25
BWBFMK-2 E25
BWBFMK-6 E25
BWBT15 E6
BWBT18 E6
BWBTK15 E25
BWBTK18-2 E25
C CCK L1
CCM-SW10 K5
CCM8 K5
CCPC L1
CDC L1
CDI18 E26
CDI18-12 E26
CDJVZ B2
CDNON B1
CFB8 K7
CFO C15
CGPB36 J5
CHDSA B2
CHDSZ B2
CHNON B2
CHTNA B2
CHTNZ B2
CM-SW10 K5
CM-SW10-15 K5
CM8 K5
CM8-15 K5
CR8 K3
CR8-15 K3
Nom
enclature Index
N1Nomenclature Index
CODE PAGE CODE PAGE CODE PAGE CODE PAGE CODE PAGEN
omen
clat
ure
Inde
x
N2
CRPD D18
CTC-SW10 K6
CTC-SW10-4 K6
CTC8 K6
CTC8-4 K6
CTD8 K4
CTD8-16 K4
CTNON B2
CTSB K1
CTTNA B2
CTTNZ B2
D DDO15 H1
DDO18 H1
DDO21 H1
DDO24 H1
DDR12 H1
DDR15 H1
DDR18 H1
DDR21 H1
DDR24 H1
DDWP E23
DEP2431 H4
DFD15 H2
DFD18 H2
DFD21 H2
DFD24 H2
DIC L13
DIRS L14
DIP30 E24
DKD24 H2
DKD2418 H2
DKD30 H2
DKD3018 H2
DKD36 H2
DKD3618 H2
DKDT24 H3
DKDT2418 H3
DKDT30 H3
DKDT3018 H3
DKDT36 H3
DKDT3618 H3
DM8 K6
DOKN E27
DOKW E28
DOS18 D13
DOS24B D13
DPK E27
DPR18 F3
DSB30 E11
DSB33 E11
DSB36 E11
DSNON B1
DSR12 D17
DSR12-2 D17
DSR15 D17
DSR15-2 D17
DSR18 D17
DSR18-2 D17
DWP E23
DWP-4 E23
E EB L5
ECB312 K16
ECB312-UF K16
ECB49 K16
ECB49-UF K16
EFT K16
EFT-UF K16
ELB K16
ELB-UF K16
F FA3-30 D21, E31, G12
FA3-42 D21, G12
FA3-60 D21, G12
FBRK18 E28
FDS C10
FEP1353 F9
FEP1353CE F9
FEP1384 F9
FEP1384CE F9
FEP2153 F9
FEP2153CE F9
FEP2184 F9
FEP2184CE F9
FFA3-30 D21, E32, G13
FFA3-36 D21, G13
FFA3-39 D21, G13
FFA3-42 D21, G13
FS L1
FS-12 L1
FS1384 J7
FS1813 J7
FS1821 J7
FS2184 J7
FS3013 J7
FS3021 J7
FS3613 J7
FS3621 J7
G GD C14
GDEFESMBB21KIT L7
GDEFESMBB24KIT L7
GDEFESMBBIL21 L7
GDEFESMBBIL21-10 L7
GDEFESMBBIL24 L7
GDEFESMBBIL24-10 L7
GDEFESMBBIR21 L7
GDEFESMBBIR21-10 L7
GDEFESMBBIR24 L7
GDEFESMBBIR24-10 L7
GDEFESMBBO21 L7
GDEFESMBBO21-10 L7
GDEFESMBBO24 L7
GDEFESMBBO24-10 L7
GDESM18KIT L6
GDESM21KIT L6
GDESM24KIT L6
GDESMIL18 L6
GDESMIL18-10 L6
GDESMIL21 L6
GDESMIL21-10 L6
GDESMIL24 L6
GDESMIL24-10 L6
GDESMIR18 L6
GDESMIR18-10 L6
GDESMIR21 L6
GDESMIR21-10 L6
GDESMIR24 L6
GDESMIR24-10 L6
GDESMOL18 L6
GDESMOL18-10 L6
GDESMOL21 L6
GDESMOL21-10 L6
GDESMOL24 L6
GDESMOL24-10 L6
GDESMOR18 L6
GDESMOR18-10 L6
GDESMOR21 L6
GDESMOR21-10 L6
GDESMOR24 L6
GDESMOR24-10 L6
GDESMPB24KIT L6
GDEUMFESA18KIT L7
GDEUMFESA21KIT L7
GDEUMFESA24KIT L7
GDEUMFESAHD24SET
L8
GDEUMFESAL18 L8
GDEUMFESAL21 L8
GDEUMFESAL24 L8
GDEUMFESAPB24KIT L7
GDEUMFESAR18 L8
GDEUMFESAR21 L8
GDEUMFESAR24 L8
GR8 K7
H HDFS3013 J7
HDFS3021 J7
HDFS3613 J7
HDFS3621 J7
HDS C10
HIN170FRM-10CT L10
HIN170FRM-1CT L10
HINBIFOLD-10CT L10
HINBIFOLD-1CT L10
HINFM-10PR L10
HINFM-1PR L10
HINFOL4WY-10PR L10
HINFOL4WY-1PR L10
HINFOL6WY-10PR L11
HINFOL6WY-1PR L11
HINMCPK L11
HINMCPK-10 L11
HINTOL2WY-10PR L11
HINTOL2WY-1PR L11
HINTOL6WY-10PR L11
HINTOL6WY-1PR L11
HINTOST-1PR L11
HK02 K20
HK02-100 K20
HK107 K20
HK107-100 K20
HK108 K20
HK108-100 K20
HK109 K20
HK109-100 K20
HK110 K20
HK110-100 K20
HK111 K20
HK111-100 K20
HK117 K20
HK117-100 K20
HK119 K20
HK119-100 K20
HK120 K20
HK120-100 K20
HK123 K20
HK123-100 K20
HK125 K20
HK125-100 K20
HK126 K20
HK126-100 K20
HK127 K20
HK127-100 K20
HK128 K20
HK128-100 K20
HK137 K20
HK137-100 K20
HK138 K21
HK138-100 K21
HK150 K21
HK150-100 K21
HK152 K21
HK152-100 K21
HK155 K21
HK155-100 K21
HK157 K21
HK157-100 K21
HK158 K21
HK158-100 K21
HK161 K21
HK161-100 K21
HK162 K21
HK162-100 K21
HP103 K22
HP103-100 K22
HP106 K22
HP106-100 K22
HP112 K22
HP112-100 K22
HP118 K22
HP118-100 K22
HP124 K22
HP124-100 K22
HP131 K22
HP131-100 K22
HP135 K22
HP135-100 K22
HP139 K22
HP139-100 K22
HP140 K22
HP140-100 K22
HP151 K22
HP151-100 K22
HP153 K22
HP153-100 K22
HP154 K22
HP154-100 K22
HP156 K22
HP156-100 K22
HP159 K22
HP159-100 K22
HP160 K22
HP160-100 K22
HP163 K23
HP163-100 K23
HP164 K23
HP164-100 K23
HP165 K23
Nomenclature Index
CODE PAGE CODE PAGE CODE PAGE CODE PAGE CODE PAGEN
omenclature Index
N3
HP165-100 K23
HP166 K23
HP166-100 K23
HSD E24
HTK-U L5
HZNON B1
HZJVA B1
HZJVZ B2
I ICM8 K4
ICM8-25 K4
ICPM8 K4
ICPM8-20 K4
ILR8 K7
ILR8-6 K7
K KONON B1
KSCCK15 E26
KSCCK18 E26
KSCCK21 E26
KSCCK24 E26
L LKDVUMFESAGDEHDL L8
LKDVUMFESAGDEHDR L8
LKDVUMFESAGDEL L8
LKDVUMFESAGDER L8
LM8 K8
LM8-10 K8
LS1 D17
LS3 D17
LSTR8 K12
M MBEP2434 E34
MC1627 G10
MDEP H4
MG C14
MI C15
MM8 K8
MM8-2 K8
MTEP1284 F9
MTEP1290 F9
MTEP1293 F9
MTEP1296 F9
MTEP2184 F9
MTEP2190 F9
MTEP2193 F9
MTEP2196 F9
MTEP2484 F9
MTEP2490 F9
MTEP2493 F9
MTEP2496 F9
MVEP2131 G13
MVEP2135 G13
MWEP1230 D24
MWEP1236 D24
MWEP1239 D24
MWEP1242 D24
N NAJVA B1
NAJVZ B2
NANON B1
NBM8 K8
NBM8-25 K8
O O24 H4
O30 H4
O36 H4
OCO18 D19
OCO24 D19
OCO30 D19
OCO36 D19
OCS2784B F5
OCS2790B F5
OCS2793B F5
OCS2796B F5
OCS3084 F5
OCS3084B F5
OCS3090 F5
OCS3090B F5
OCS3093B F5
OCS3096 F5
OCS3096B F5
OCS3384 F5
OCS3384B F5
OCS3390 F5
OCS3390B F5
OCS3393B F5
OCS3396 F5
OCS3396B F5
OCSP27 F6
OCSP30 F6
OCSP33 F6
OCU2784B F4
OCU2790B F4
OCU2793B F4
OCU2796B F4
OCU3084 F4
OCU3084B F4
OCU3090 F4
OCU3090B F4
OCU3093B F4
OCU3096 F4
OCU3096B F4
OCU3384 F4
OCU3384B F4
OCU3390 F4
OCU3390B F4
OCU3393B F4
OCU3396 F4
OCU3396B F4
ODK27 F5
ODK30 F5
ODK33 F5
OL3-12 D22
OL3-15 D22
OL3-18 D22
OL3-21 D22
OL3-24 D22
OL3-27 G12
OL3-30 D22, E33, G12
OL3-36 D22
OL3-39 D22
OL3-42 D22
OL3-84 F7
OL3-90 F7
OL3-93 F7
OL3-96 F7
OL6-21 D22
OL6-24 D22
OL6-30 D22, E33
OL6-36 D22
OL6-39 D22
OL6-42 D22
OSC8 K4
OSC8-25 K4
OSCP8 K4
OSCP8-20 K4
P PB18 E3
PB21 E3
PB24 E3
PB24B E4
PB27B E4
PB30 E4
PB30B E4
PB36 E4
PB36B E4
PB4834 J4
PB4834-4 J4
PB4834P J3
PB4834P-4 J3
PB4896 J3
PB4896-2 J3
PB4896P J2
PB4896P-2 J2
PB9648 J3
PB9648-2 J3
PBBC24/27 E16
PBBC24/27B E17
PC3684B F3
PC3690B F3
PC3693B F3
PC3696B F3
PCNON B1
PCSK3612-3/4 J7
PDDO30 E28
PDDO36 E28
PFT K19
PFT-UF K19
PG C14
PLB K19
PLB-UF K19
PM C14
PP C14
PPEBZ B2
PPNON B1
PR C14
PSP6-30 K19
PSP6-34 K19
PSP6-36 K19
PSP6-42 K19
PW1824 D3
PW1830 D3
PW2124 D3
PW2130 D3
PW2418 D3
PW2418B D4
PW2424 D3
PW2424B D4
PW2430 D3
PW2430B D4
PW3018 D4
PW3018B D4
PW3024 D4
PW3024B D4
PW3030 D4
PW3030B D4
PW3618 D4
PW3618B D4
PW3624 D4
PW3624B D4
PW3630 D4
PW3630B D4
PWA2430 D7
PWBC24/2730 BR or BL D6
Q QCST L2
QGL L2
QP L2
QR8 K9
QR8-28 K9
QST L2
R RAAUMFESAGDEHDSET L10
RCM8 K9
RCM8-6 K9
REP3296 F6
RHB D16
RHF3024SP D15
RHF3624SP D15
RM8 K9
RMBFESMBBGDE L9
RMBSMGDE L8
RMBSMGDE-25 L8
RMBSMGDEPB L9
RMBSMGDEPB-2 L9
RMBUMFESAGDE-2 L9
RMBUMFESAGDEDKDSET L9
RMBUMFESAGDEPB-2 L9
ROT1221 J9
ROT1224 J9
ROT1518 J9
ROT1521 J9
ROT1524 J9
ROT1818 J9
ROT1821 J9
ROT1824 J9
ROT2121 J9
ROT2124 J9
ROT2418B J9
ROT2421B J9
ROT2424B J9
ROT2718B J9
ROT2721B J9
ROT2724B J9
ROT3018B J9
ROT3021B J9
ROT3024B J9
ROT3321B J9
ROT3324 J9
ROT3324B J9
ROT3621B J9
ROT3624B J9
ROT3924 J9
ROT4524 J9
RSF30B E13
Nomenclature Index
CODE PAGE CODE PAGE CODE PAGE CODE PAGE CODE PAGEN
omen
clat
ure
Inde
x
N4
RSF33B E13
RSF36B E13
RSF42 E13
RSP5-36 K19
RSP5-36-UF K19
RSP5-42 K19
RSP5-42-UF K19
S SADO L5
SB12 E8
SB15 E8
SB18 E8
SB21 E8
SB24 E8
SB24B E9
SB24BFH E9
SB24BUT E9
SB24FH E8
SB24UT E8
SB2727B E9
SB2727BUT E9
SB27B E9
SB27BFH E9
SB27BUT E9
SB30 E9
SB3027 E9
SB3027B E9
SB3027BUT E9
SB3027UT E9
SB30B E9
SB30B-CG E7
SB30BFH E9
SB30BUT E9
SB30BUT-CG E7
SB30FH E9
SB30UT E9
SB33 E9
SB3327 E9
SB3327B E9
SB3327BUT E9
SB3327UT E9
SB33B E9
SB33B-CG E7
SB33BFH E9
SB33BUT E9
SB33BUT-CG E7
SB33FH E9
SB33UT E9
SB36 E9
SB3627 E9
SB3627B E9
SB3627BUT E9
SB3627UT E9
SB36B E9
SB36B-CG E7
SB36BFH E9
SB36BUT E9
SB36BUT-CG E7
SB36FH E9
SB36UT E9
SB39 E9
SB39FH E9
SB39UT E9
SB42 E9
SB4227 E9
SB4227UT E9
SB42FH E9
SB42UT E9
SB48 E9
SB48FH E9
SB48UT E9
SBA36 E11
SBA42 E11
SBEBA B1
SBEBZ B2
SBNON B1
SBP8 K11
SBT8 K11
SCM-SW10 K6
SCM8 K6
SCV8 K10
SCV8-25 K10
SDEBA B1
SDIK15 E29
SDIK18 E29
SDIK21 E29
SDIK24 E29
SDNON B1
SDO18 D19
SDO24 D19
SDO30 D19
SDO36 D19
SF24 E10
SF24B E10
SF24BFH E11
SF24FH E10
SF30 E10
SF30B E10
SF30BFH E11
SF30FH E11
SF36 E10
SF36B E10
SF36BFH E11
SF36FH E11
SFA36 E12
SFA36FH E12
SFA39 E12
SFA42 E12
SFB2336 E13
SFDB4242 E14
SGH30 D18
SGH30-10 D18
SGH36 D18
SGH36-10 D18
SHCLP34 L12
SHCLP34-100 L12
SHCLP34-20 L12
SHCLPLK34L L12
SHCLPLK34L-20 L12
SHCLPLK34R L12
SHCLPLK34R-20 L12
SHO8 K11
SHO8-25 K11
SHSUPBPK L12
SHSUPBPK-10 L12
SHSUPBPK-100 L12
SHSUPC L12
SHSUPC-10 L12
SHSUPPK L12
SHSUPPK-25 L12
SHSUPPKMGD24/30 L13
SHSUPPKMGD36 L13
SHSUPPKMGD39/42 L13
SLDO14.75X11.25 L4
SM8 K10
SM8-63 K10
SP5-36 K19
SP5-36-UF K19
SP5-42 K19
SP5-42-UF K19
SPM8 K10
SPM8-100 K10
SPR F3
STB E29
STB1813 J8
STB1821 J8
STB3013 J8
STB3021 J8
STB3613 J8
STB3621 J8
STR8 K12
SWEOS30 D11
SWEOS36 D11
SWEOS42 D11
SWS4 K12
SWS6 K12
SWS8 K12
T TB E29
TBE8 K14
TBE8-25 K14
TBP8 K14
TBV18 J8
TBV30 J8
TBV36 J8
TCB312 K17
TCB312-UF K17
TCB49 K17
TCB49-UF K17
TEP84 F8
TEP84-2 F8
TEP96 F8
TEP96-2 F8
TEPF1-84 F8
TEPF1-96 F8
TF3-84 F7, G11
TF3-90 F7, G11
TF3-93 F7, G11
TF3-96 F7, G11
TFB8 K7
TFF3-84 F7, G12
TFF3-90 F7, G12
TFF3-93 F7, G12
TFF3-96 F7, G12
TFJVZ B2
TFJVA B1
TFNON B1
TFT K17
TFT-UF K17
TIM8 K13
TIM8-25 K13
TIM8-25-UF K13
TIM8-UF K13
TKBK36 E30
TKBK6 E30
TKCL8 K13
TKCL8-4 K13
TKCUL8 I5
TKCUL8-4 I5
TKCUV8 I5
TKCUV8-4 I5
TKCV8 K13
TKCV8-4 K13
TLB K17
TLB-UF K17
TP L2
TP-12 L2
TSCP L2
TSCP-12 L2
TSCT L2
TSCT-12 L2
TUK L2
TVMC2430 G10
TVMC3030 G10
TVMC3630 G10
U U1584 F1
U158424 F2
U1590 F1
U159024 F2
U1593 F1
U159324 F2
U1596 F1
U159624 F2
U1884 F1
U188424 F2
U1890 F1
U189024 F2
U1893 F1
U189324 F2
U1896 F1
U189624 F2
U2484 F1
U248424 F2
U248424B F2
U2484B F1
U2490 F1
U249024 F2
U249024B F2
U2490B F1
U2493 F1
U249324 F2
U249324B F2
U2493B F1
U2496 F1
U249624 F2
U249624B F2
U2496B F1
U308424B F2
U3084B F1
U309024B F2
U3090B F1
U309324B F2
U3093B F1
U309624B F2
U3096B F1
U368424B F2
U3684B F1
U369024B F2
U3690B F1
U369324B F2
Nomenclature Index
CODE PAGE CODE PAGE CODE PAGE CODE PAGE CODE PAGEN
omenclature Index
N5
U3693B F1
U369624B F2
U3696B F1
UAP30 J4
UAP33 J4
UAP36 J4
UAP42 J4
UB12 I1
UB12FH I1
UB15 I1
UB15FH I1
UB18 I1
UB18FH I1
UB21 I1
UB24 I1
UB24B I2
UB24BFH I2
UB24FH I1
UB27B I2
UB27BFH I2
UB30B I2
UB30BFH I2
UB33B I2
UB33BFH I2
UB36B I2
UB36BFH I2
UB39FH I2
UB42 I2
UB42FH I2
UB45FH I2
UB48FH I2
UB9FH I1
UBCR36 I3
UBD12-3D I2
UBD15-3D I2
UBD18-3D I2
UBD21-3D I2
UBD24-3D I2
UBLS36 I3
UBSF36BFH I4
UBT24B I2
UCM8 K14
UCM8-11 K14
UCS36 D18
UCSC2424 D18
UF1584 F2
UF1590 F2
UF1593 F2
UF1596 F2
UF1884 F2
UF1890 F2
UF1893 F2
UF1896 F2
UF2484 F2
UF2484B F2
UF2490 F2
UF2490B F2
UF2493 F2
UF2493B F2
UF2496 F2
UF2496B F2
URSF30B I4
URSF33B I4
URSF36B I4
URSF42 I4
USFCK30BFH I4
USFCK33BFH I4
USFCK36BFH I4
USFCK42FH I4
USK1512-3/4 J7
USK1524-3/4 J7
USK1812-3/4 J7
USK1824-3/4 J7
USK2412-3/4 J7
USK2424-3/4 J7
USK3012-3/4 J7
USK3024-3/4 J7
USK3612-3/4 J7
USK3624-3/4 J7
UST12 E30
UST15 E30
UTK12 E30
UTK22 E30
V V1808SH K1
V18SH K1
V2408SH K1
V24SH K1
V3008SH K1
V30RP K1
V30SH K1
V3608SH K1
V36RP K1
V36SH K1
V4208SH K1
V42RP K1
V42SH K1
V4808SH K1
V48RP K1
V48SH K1
V48T K2
V6008SH K1
V60SH K1
V7208SH K1
V72SH K1
V72T K2
V8408SH K1
V84SH K1
V96T K2
VB12 G1
VB1235 G1
VB15 G1
VB1535 G1
VB18 G1
VB1816FH G2
VB1818FH G2
VB1835 G1
VB1835FH G2
VB18FH G2
VB21 G1
VB2118FH G2
VB2135 G1
VB2135FH G2
VB21FH G2
VB24 G1
VB2418BFH G2
VB2418FH G2
VB2435 G1
VB243518BFH G2
VB243518SFH G2
VB2435B G1
VB2435BFH G2
VB2435SFH G2
VB24B G1
VB24BFH G2
VB24FH G2
VB24SFH G2
VB2718BFH G2
VB273518BFH G2
VB2735BFH G2
VB27BFH G2
VB3018BFH G2
VB3018FH G2
VB303518BFH G2
VB303518FH G2
VB3035BFH G2
VB3035FH G2
VB30BFH G2
VB30FH G2
VB3318BFH G2
VB3318FH G2
VB333518BFH G2
VB3335BFH G2
VB3335FH G2
VB33BFH G2
VB33FH G2
VB3618BFH G2
VB3618FH G2
VB363518BFH G2
VB363518FH G2
VB3635BFH G2
VB3635FH G2
VB36BFH G2
VB36FH G2
VB3935FH G2
VB39FH G2
VB4218FH G2
VB4235FH G2
VB42FH G2
VB4818FH G2
VB4835FH G2
VB48FH G2
VB5418FH G2
VB5435FH G2
VB54FH G2
VB6018FH G3
VB6035FH G3
VB60FH G3
VCD24 DR or DL G5
VCD2418 DR or DL G5
VCD2435 DR or DL G5
VCD30 DR or DL G5
VCD3018 DR or DL G5
VCD3035 DR or DL G5
VCD36 DR or DL G5
VCD3618 DR or DL G5
VCD3635 DR or DL G5
VCD42 G5
VCD4218 G5
VCD4235 G6
VCD48 G5
VCD4818 G5
VCD4835 G6
VCD60 G6
VCD6018 G6
VCD6035 G6
VD12-3D G7
VD1218-3D G7
VD1235-3D G7
VD1235-4D G7
VD123518-4D G7
VD15-3D G7
VD1518-3D G7
VD1535-3D G7
VD1535-4D G7
VD153518-4D G7
VD18-3D G7
VD1818-3D G7
VD1835-3D G7
VD1835-4D G7
VD183518-4D G7
VD21-3D G7
VD2118-3D G7
VD2135-3D G7
VD2135-4D G7
VD24-3D G7
VD2418-3D G7
VD2435-3D G7
VD2435-4D G7
VF3 G11
VFF3 G12
VGP4834 J5
VGP4896 J5
VHRO18 G11
VLC1584 G8
VLC1590 G8
VLC1596 G8
VLC1848 G7
VLC1884 G8
VLC1890 G8
VLC1896 G8
VLC2484 G8
VLC2484B G8
VLC2490 G8
VLC2490B G8
VLC2496 G8
VLC2496B G8
VLSK1521-3/4 J7
VLSK1821-3/4 J7
VLSK2421-3/4 J7
VNTCLPPK L13
VNTCLPPK-25 L13
VSB2435B G3
VSB24B G3
VSB2735B G3
VSB27B G3
VSB3035B G3
VSB30B G3
VSB3335B G3
VSB33B G3
VSB36-2D G4
VSB3635-2D G4
VSB3635B G3
VSB36B G3
VSB39 G3
VSB3935 G3
VSB42 G3
VSB42-2D G4
VSB4235 G3
VSB4235-2D G4
VSB48-2D G4
VSB4835-2D G4
VSB54-2D G4
VSB54-3D G3
Nomenclature Index
CODE PAGE CODE PAGE CODE PAGE CODE PAGE CODE PAGEN
omen
clat
ure
Inde
x
N6
VSB5435-2D G4
VSB5435-4D G3
VSB60-2D G4
VSB60-3D G3
VSB6035-2D G4
VSB6035-4D G3
VTK12 J8
VTK15 J8
VTK16 J8
VTK18 J8
VTK21 J8
VTK24 J8
VTK27B J8
VTK30B J8
VTK33B J8
VTK36B J8
VTKS12 J8
VTKS15 J8
VTKS18 J8
VTKS24 J8
VTKS27B J8
VTKS30B J8
VTKS33B J8
VTKS36B J8
VW1530 G9
VWB2430 G8
VWB2430B G8
VWB2648 G9
W W1224 D1
W1230 D1
W1236 D1
W1239 D1
W1242 D1
W1524 D1
W1530 D1
W1536 D1
W1539 D1
W1542 D1
W1824 D1
W1830 D1
W1836 D1
W1839 D1
W1842 D1
W2124 D1
W2130 D1
W2136 D1
W2139 D1
W2142 D1
W2418 D1
W2418B D2
W2424 D1
W2424B D2
W2430 D1
W2430B D2
W2436B D2
W2439 D1
W2439B D2
W2442 D1
W2442B D2
W2712B D2
W2715B D2
W2718B D2
W2724B D2
W2730B D2
W2736B D2
W2739B D2
W2742B D2
W3012 D2
W3012B D2
W3015 D2
W3015B D2
W3018 D2
W3018B D2
W3021 D2
W3021B D2
W3024 D2
W3024B D2
W3027 D2
W3027B D2
W3030 D2
W3030B D2
W3036 D2
W3036B D2
W3039B D2
W3042 D2
W3042B D2
W3312 D2
W3312B D2
W3315 D2
W3315B D2
W3318 D2
W3318B D2
W3321 D2
W3321B D2
W3324 D2
W3324B D2
W3327 D2
W3327B D2
W3330 D2
W3330B D2
W3336 D2
W3336B D2
W3339B D2
W3342 D2
W3342B D2
W3612 D2
W3612B D2
W3615 D2
W3615B D2
W3618 D2
W3618B D2
W3621 D2
W3621B D2
W3624 D2
W3624B D2
W3627 D2
W3627B D2
W3630 D2
W3630B D2
W3636 D2
W3636B D2
W3639B D2
W3642 D2
W3642B D2
W3912 D2
W3915 D2
W3918 D2
W3921 D2
W3924 D2
W3927 D2
W3930 D2
W3936 D2
W3939 D2
W3942 D2
W4212 D2
W4215 D2
W4218 D2
W4221 D2
W4224 D2
W4227 D2
W4230 D2
W4236 D2
W4239 D2
W4242 D2
W4512 D2
W4515 D2
W4518 D2
W4524 D2
W4530 D2
W4812 D2
W4815 D2
W4818 D2
W4824 D2
W4830 D2
W930 D1
W936 D1
W939 D1
W942 D1
WA2430 D7
WA2436 D7
WA2439 D7
WA2442 D7
WA2730 D7
WA2736 D7
WA2739 D7
WA2742 D7
WB3-1230 D23
WB3-1242 D23
WB6-1230 D23
WB6-1242 D23
WBC24/2730
BR or BL D6
WBC24/2736
BR or BL D6
WBC24/2739
BR or BL D6
WBC24/2742
BR or BL D6
WBC27/3024
BR or BL D6
WBC27/3030
BR or BL D6
WBC27/3036
BR or BL D6
WBC27/3039
BR or BL D6
WBC27/3042
BR or BL D6
WBC30/3330
BR or BL D6
WBC30/3336
BR or BL D6
WBC30/3339
BR or BL D6
WBC30/3342
BR or BL D6
WBC33/3630
BR or BL D6
WBC36/3924
BR or BL D6
WBC36/3930
BR or BL D6
WBC36/3936
BR or BL D6
WBC36/3939
BR or BL D6
WBC36/3942
BR or BL D6
WBC42/4530
BR or BL D6
WBC48/5130
BR or BL D6
WCA1230 D8
WCA1236 D8
WCA1239 D8
WCA1242 D8
WCB312 K18
WCB312-UF K18
WCB49 K18
WCB49-UF K18
WCD3015 D11
WCD3615 D11
WCF6-1530 D23
WCF6-1536 D23
WCF6-1542 D23
WDFT K18
WDFT-UF K18
WDLB K18
WDLB-UF K18
WEC1230 D9
WEC1236 D9
WEC1239 D9
WEC1242 D9
WEP1530 D23
WEP1530-6 D23
WEP1542 D23
WEP1542-6 D23
WEP30 D23
WEP30-6 D23
WEP42 D23
WEP42-6 D23
WEZR2430 D8
WEZR2436 D8
WEZR2439 D8
WEZR2442 D8
WF1-30 D20
WF1-30-20 D20
WF2-30 D20
WF2-30-10 D20
WF3-30 D20
WF3-30-4 D20
WF3-36 D20
WF3-39 D20
WF3-39-4 D20
WF3-42 D20
WF3-42-4 D20
WF6-30 D20
WF6-36 D20
WF6-39 D20
WF6-42 D20
WFC3-30 D22
WFC3-42 D22
WFF3-12 D20
Nomenclature Index
CODE PAGE CODE PAGE CODE PAGE CODE PAGE CODE PAGEN
omenclature Index
N7
WFF3-15 D20
WFF3-18 D20
WFF3-24 D20
WFF3-30 D20
WFF3-36 D20
WFF3-39 D20
WFF3-42 D20
WFP3-30 D22
WFP6-30 D22
WHB36-620 D16
WHCC362442P D15
WHCV362442 D15
WHL36 D16
WHNON B1
WL1530 D11
WL3015 D11
WMC2736B D13
WMC2745B D13
WMC3036B D13
WMC3045B D13
WMS271812 D12
WMS271815 D12
WMS301812 D12
WMS301815 D12
WMSC2436B D12
WMSC2730B D12
WMSC2736B D12
WMSC2742B D12
WR3012 D3
WR3012B D3
WR3015 D3
WR3015B D3
WR3018 D3
WR3018B D3
WR3312 D3
WR3312B D3
WR3315 D3
WR3315B D3
WR3318 D3
WR3318B D3
WR3612 D3
WR3612B D3
WR3615 D3
WR3615B D3
WR3618 D3
WR3618B D3
WR3624 D3
WR3624B D3
WR3627 D3
WR3627B D3
WR3912 D3
WR3915 D3
WR3918 D3
WR3924 D3
WR3927 D3
WR4212 D3
WR4218 D3
WR4224 D3
WRM8 K15
WRM8-25 K15
WRM8-25-UF K15
WRM8-UF K15
WRS1530 D11
WRS1830 D11
WRS2430 D11
WRS3015 D11
WRS3018 D11
WRS3615 D11
WRS3618 D11
WSM8 K10
WSM8-25 K10
WTDK16 E29
WTDK16-5PR E29
WTDRO12 E30
WTDRO9 E30
Nomenclature Index
CODE PAGE CODE PAGE CODE PAGE CODE PAGE CODE PAGEN
omen
clat
ure
Inde
x
N8
Index
Index
ITEM PAGE
11 Standard Full-Width Tray C121 Standard Tray C11170 Degree Hinge L10
22 Deluxe Full-Width Trays C132 Deluxe Trays C122 Standard Full-Width Trays C122 Standard Trays C11
33 Standard Trays C113/4 Extension Side Mount Roller Guide Kit L63/4 Extension Side Mount Roller Guide Peninsula Base Kit L63/4 Extension Side Mount Roller Guides L63/4” Shelf Clip L123/4” Shelf Clip with Stop L1231 1/2” Vanity Frame Dimensions C434 1/2” Vanity Frame Dimensions Item C4
44 Deluxe Trays C134 Standard Trays C11
66 Deluxe Trays C136 Standard Trays C12
AAll Plywood Construction (ADT) C8Amaretto B1Amaretto w/Java Glaze B2Angle Crown Molding K5Angled Outside Corner Molding - 135° K3Antique Iron Knob K20Antique Pewter Braided Knob K20Antique Pewter Braided Pull K22Antique Pewter Flower Knob K20Appliance Garage Tambour Diagonal D14Appliance Garage Tambour Straight D14Arbor Falls II A1Avenue w/Solid Drawer Front A1Avenue w/5-Piece Drawer Front Option A1
BBase Angle Revolving E20Base Blind Corner E16Base Blind Corner Cabinet Information E15Base Box E33Base Butt Door - Full Extension Tray E3Base Column E33Base Column Fluted E34Base Combination Four Drawer E5Base Corner Angle Butt Full-Height E19Base Corner Fixed Shelf E19Base Corner Revolving E18Base Corner Revolving Wood Lazy Susan E18Base Deep Tray Kit J7Base Deep Tray Kit - Side Mount Full Extension J8Base Double Door E2
Base Double Door Full-Height E2Base End Angle Full-Height E21Base End Corner Full-Height E20Base End Panel E34Base End Panel Filler E34Base Filler E31Base Filler Corner E32Base Filler Corner Overlay E33Base Filler Pull-Out E32Base Fluted Filler E31Base Four Drawer E5Base Lazy Susan E17Base Microwave Cabinet E22Base Oven Cabinet Universal E22Base Pots and Pans Storage E4Base Pull-Out E6Base Single Door E1Base Single Door Full-Height E1Base Swing-Out Shelves E26Base Three Door E3Base Three Drawer E5Base Tray Kit - Double Faced, Standard J7Base Tray Kit - Standard J7Base Wastebasket Floor Mount Kit Double E25Base Wastebasket Floor Mount Kit Single E25Base Wastebasket Top Mount E6Base Wastebasket Top Mount Kit E25Bayville A2Bellingham A2Bi-Fold Hinge L10Black Ceramic Insert Pull K22Black Ceramic Insert Round Knob K21Black Nickel Knob K20Black Nickel Traditional Pull K23Bookcase Cabinets D10Bright Brass Traditional Pull K23Bright Chrome Knob K20Brushed Satin Pewter French Tassel Pull K22Brushed Satin Pewter French Tassel Round Knob K21
CCabinet Care Kit L1Cabinet Cleaning and Polishing Cloths L1Cabinet Dusting Cloths L1Cabinet Front Only C15Cannonsburg w/Solid Drawer Front A2Cannonsburg w/5-Piece Drawer Front Option A2Chair Rail Molding K3Chiffon B2Chiffon w/Desert Glaze B2 Chiffon w/Desert Accent Glaze B2Chiffon w/Tuscan Accent Glaze B2Chiffon w/Tuscan Glaze B2Chrome Traditional Pull K23Cider B1Cider w/Java Glaze B2Classic Crown Molding K5Construction Options C8, C9Contemporary Crown Molding K6Construction Options Chart C8 Construction Options Diagram C9Cookbook Rack Pull-Down D18Copper-Pewter Knob K20CoreGuard® Panel Backer J5CoreGuard® Sink Base E7Corner Molding K4Cotton B2Cotton w/Tuscan Accent Glaze B2 Cotton w/Tuscan Glaze B2Countertop Molding - Decorative Edge K4
Countertop Support Bracket K1Crown Molding K5Cutlery Divider E26
DDecorative Dishwasher Panel E23Deep Sink Base E11Dentil Molding K6Depth Modification C10Design Ideas J6Desk Door H1Desk Drawer H1Desk End Panel H4Desk File Drawer H2Desk Knee Drawer H2Desk Knee Drawer Trimmable H3Dishwasher Panel E23Door and Frame Assembly Sales Samples L4Door Insert Clip L13Door Insert Retaining Strip L14Door Pantry Rack F3Door Spice Rack D17Door Storage Unit D13Drawer Front C15Drawer Organizer Kit Narrow E27Drawer Organizer Kit Wide E28Drawer Partition Kit E27Drop-In Range Panel E24Dusk B1
Dusty Copper Flower Knob K20
EEdge Banding L5Estero Corbel Large K16Estero Corbel Small K16Estero Foot K16Estero Leg Base K16
FFace Mount Hinge L10Fill Stick L1Filler Angle D21, E31Filler Angle G12Filler Overlay D22, E33Filler Overlay F7, G12Fluted Filler Angle D21Fluted Filler Angle E32, G13Foil Box Rack E28Fox Harbor A3Full Depth Shelf C10Full Extension Heavy Duty Under Mount Soft Action+™ Guide Set L8Full Extension Side Mount Ball Bearing Guide Kit L7Full Extension Side Mount Ball Bearing Guides L7Full Extension Under Mount Soft Action+™ Guides L8Full Extension Under Mount Soft Action+™ Peninsula Base Guide Kit L7Full Extension Under Mount SoftAction+™ Guide Kit L7Full Overlay - Concealed Hinges C1Full Overlay 4 Way Hinge L10Full Overlay 6 Way Hinge L11Furniture Base K7Furniture End Panels F9Furniture Shelf Kit J7Fusion A3
GGalley Rail K7
ITEM PAGE ITEM PAGE
O1
ITEM PAGE
Inde
x
Index
ITEM PAGE ITEM PAGE
O2
Glass Doors C14Glen Arbor A3
HHalf Depth Shelf C10Hazelnut B1Hazelnut w/Java Accent Glaze B1Hazelnut w/Java Glaze B2Hardware Template Kit Universal L5Heat Shield E24Heavy Duty Furniture Shelf Kit J7
IInset Light Rail K7
KKnife Section Cutting Center Kit E26Kona B1
LLabelle A3Lariat A4Lazy Susan Revolving Shelf Kit (One Shelf) D17Lazy Susan Revolving Shelf Kit (Three Shelves) D17Library Molding K8Locking Device - Full Extension Heavy Duty Under Mount Soft Action+™ Guides L8Locking Device - Full Extension Under Mount Soft Action+™ Guides L8
MMatching Base End Panel E34Matching Desk End Panel H4Matching Interior C15Matching Tall End Panel F9Matching Vanity End Panel G13Matching Wall End Panel D24Medicine Cabinet G10Medicine Cabinet Pack Hinge L11Mirror Molding K8Mullion Glass Door C14
NNarrow Batten Molding K8Natural B1Natural w/Java Accent Glaze B2Natural w/Java Glaze B1
OOchre Finished Ceramic Totem Knob K21Ochre Finished Ceramic Totem Pull K22Office Frame Dimensions C5Oil Rubbed Bronze Cup Pull K22Oil Rubbed Bronze Round Knob K21Open Cube Organizer D19Organizer H4Oven Cabinet Frame Dimensions C3Oven Cabinet Single F5Oven Cabinet Support Platform F6Oven Cabinet Universal F4Oven Drawer Kit F5
PPanel Backer 3’ Tall-Paper J3
Panel Backer 3’ Tall-Veneer J4Panel Backer-Paper J2Panel Backer-Veneer J3Pantry Cabinet Butt Door F3Paprika B1Paprika w/Ebony Glaze B2Pecan B1Pegged Deep Drawer Organizer E28Peninsula Base Butt Door E4Peninsula Base Butt Door Blind Corner E17Peninsula Base Double Door E4Peninsula Base Single Door E3Peninsula Base Single Door Blind Corner E16Peninsula Wall Angle D7Peninsula Wall Blind Corner D6Peninsula Wall Double Door D4Peninsula Wall Single Door D3Plain Square Post K19Portrait w/Solid Door Front A4Portrait w/5-Piece Door Front A4Prairie Glass Door C14
QQuarter Round Molding K9
RRadius Cabinet Molding K9Ralston w/Solid Door Front A4Ralston w/5-Piece Door Front A5Range Hood Blower and Light Unit D16Range Hood Front Spindle Railing D15Rear Adjustment Adapter - Full Extension Heavy Duty Under Mount Soft Action+™ Guides L10Rear Mounting Bracket - 3/4 Extension Side Mount Roller Guides L8Rear Mounting Bracket - 3/4 Extension Side Mount Roller Guides Peninsula Base L9Rear Mounting Bracket - Full Extension Side Mount Ball Bearing Guides L9Rear Mounting Bracket - Full Extension Under Mount Soft Action+™ Guides L9Rear Mounting Bracket - Full Extension Under Mount Soft Action+™ Guides DKD L9Rear Mounting Bracket - Full Extension Under Mount Soft Action+™ Guides Peninsula Base L9Refrigerator End Panel F6Replacement Accessory Non-Drilled Doors L30-L32Replacement Door and Drawer Front L17-L29Replacement Drawer Boxes - Dovetail L33Replacement Drawer Boxes - Standard L34Removable Sink Front Double Door E13Roll-Out Trays - Solid Wood J9Rope Molding K9Rusty Flower Knob K20
SSable B1Sable w/Ebony Accent Glaze B2Sable w/Ebony Glaze B1Sales Door L4Satin Aluminum Boat Cleat Transitional Pull K22Satin Aluminum Knob K20Satin Nickel Canoe Pull K22Satin Nickel Diminishing Knob K21Satin Nickel Football Shaped Knob K21Satin Nickel Fusilli Pull K22Satin Nickel Knob K20Satin Nickel Rope Knob K20Satin Nickel Rope Pull K22Satin Nickel Suitcase Pull K22Satin Nickel Traditional Pull K22, K23Satin Nickel Wavy Pull K22
Satin Nickel Wire Cable Pull K22Scribe Cove Molding K10Scribe Molding K10Sedona B1Sedona w/Ebony Accent B2Seneca Ridge Arch A5Seneca Ridge Square A5Shelf Kits J7Shelf Support Back Pack L12Shelf Support Center L12Shelf Support Pack L12Shelf Support Pack MG/PM - 24” and 30” High L13Shelf Support Pack MG/PM - 36” High L13Shelf Support Pack MG/PM - 39” and 42” High L13Shelf Top and Bottom J8Shoe Molding K11Single Bead Pilaster K11Single Bead Trim K11Sink Base Angle E11Sink Base Double Door E9Sink Base Double Door Full-Height E9Sink Base Single Door E8Sink Base Single Door Full-Height E8Sink Front Angle E12Sink Front Angle Full-Height E12Sink Front Bottom E13Sink Front Diagonal Bottom E14Sink Front Double Door E10Sink Front Double Door Full-Height E11Sink Front Single Door E10Sink Front Single Door Full-Height E10Sliding Towel Bar - Chrome E29Soffit Crown Molding K6SoftAction™ Door Hardware L5Solid Bright Brass Knob K20Solid Wood Stock K12Solid Wood Wall End Open Shelf D11Somerton Hill Arch A5Somerton Hill Square A6Spice Drawer Insert Kit E29Spice Drawer Organizer D19Spindles K19Spring Valley Arch A6Spring Valley Square A6Stain, Glaze and Paint Direct Ship Information L3Standard Construction (SST) C8Standard Construction w/ Dovetail Drawers (SDT) C8Standard Construction w/Plywood Ends (PST) C8Standard Construction w/Plywood Ends and Dovetail Drawers (PDT) C8Starter Molding K12Stem Glass Holder D18Sutton Cliffs Arch A6Sutton Cliffs Square A7Swing-Out Pantry Rack F3
TTall End Panel F8Tall End Panel Filler F8Tall Filler G11Tall Filler F7Tall Fluted Filler F7, G12Tall Frame Dimensions C2Tall Utility Cabinet 12” Deep F1Tall Utility Cabinet 24” Deep F2Tapered Foot K19Tapered Leg Base K19Tapestry Corbel Large K17Tapestry Corbel Small K17Tapestry Foot K17Tapestry Insert Molding K13Tapestry Leg Base K17
A3A33
Index
Index
ITEM PAGE ITEM PAGE ITEM PAGE
O3
Thermofoil B1Toeboard/Valance J8Toekick Backer E30Toekick Cover - Laminate K13Toekick Cover - Veneer K13Toffee B1Toffee w/Java Accent Glaze B2Toffee w/Java Glaze B1Tolani w/Solid Drawer Front A7Tolani w/3-Piece Drawer Front A7Touch Up Kit L2Touch Up Pen L2Touch Up Quart L2Touch Up Spray Can Primer L2Touch Up Spray Can Topcoat L2Towel Bar E29Traditional Overlay - Classic Hinges C1Traditional Overlay 2 Way Hinge L11Traditional Overlay 6 Way Hinge L11Tray Availability Charts J10-J12Tri-View Medicine Cabinet G10Triple Bead Edging K14Triple Bead Pilaster K14Tumbled Dark Gunmetal Mission Style Ringed Pendant Pull K22Tumbled Dark Gunmetal Round Knob K21
UUnder Cabinet Corner Shelf D18Under Cabinet Molding K14Under Cabinet Shelf D18Under Sink Tote E30Universal Access Panel J4Universal Base Corner Revolving I3Universal Base Double Door I2Universal Base Double Door - Full-Height I2Universal Base Lazy Susan I3Universal Base Single Door I1Universal Base Single Door - Full-Height I1Universal Base Sink Front Butt Door - Full-Height I4Universal Base Sink Front Cabinet Kit - Full-Height I4Universal Base Table Butt Door I2Universal Base Three Drawer I2Universal Base Toekick Cover - Laminate I5Universal Base Toekick Cover - Veneer I5Universal Frame Dimensions C6Universal Removable Sink Front Double Doors I4Utility Front F2Utility Tray Hinge L11Utility Tray Kit E30
VV- Groove Panel J5Valance Raised Panel K1Valance Shaker K1Valance Traditional K2Vanity Base Double Door G1Vanity Base Double Door Full-Height G2Vanity Base Four Door Full-Height G3Vanity Base Single Door G1Vanity Base Single Door Full-Height G2Vanity Base Three Door Full-Height G2Vanity Combination Drawer Eight Drawer Double Door G6Vanity Combination Drawer Eight Drawer Single Door G6Vanity Combination Drawer Six Drawer Double Door G6Vanity Combination Drawer Six Drawer Single Door G5
Vanity Combination Drawer Three Drawer G5Vanity Combination Drawer Two Drawer G5Vanity Drawer Four Drawer G7Vanity Drawer Three Drawer G7Vanity Filler G11Vanity Fluted Filler G12Vanity Hamper Roll-Out G11Vanity Linen Cabinet G7Vanity Linen Cabinet Tall G8Vanity Sink Base Butt Door G3Vanity Sink Base Double Bowl G3Vanity Sink Base Two Drawer Double Door G4Vanity Sink Base Two Drawer Four Door G4Vanity Sink Base Two Drawer Three Door G4Vanity Tall Dimensions C5Vanity Tray Kit J8Vanity Tray Kit - Space Saver J8Vanity Wall - 4 3/4” Deep G9Vanity Wall Boutique - 7” Deep G8Vanity Wall Boutique - 8” Deep G9Venetian Bronze Copper French Lace Knob K21Vent Clip Pack L13
WWall and Base Frame Dimensions C2Wall Angle Single Door D7Wall Blind Corner Cabinet Information D5Wall Blind Corner Double Door D6Wall Blind Corner Single Door D6Wall Box D23Wall China Display D11Wall Column Fluted D23Wall Corner Angle D8Wall Double Door D2Wall Easy Reach D8Wall End Corner D9Wall End Panel D23Wall Filler D20Wall Filler Corner D22Wall Fluted Filler D20Wall Hood Blower D16Wall Hood Classic Chimney Plain D15Wall Hood Cove D15Wall Hood Liner D16Wall Lattice D11Wall Microwave Cabinet D13Wall Microwave Shelf D12Wall Microwave Shelf Cabinet D12Wall Pull-Out Filler D22Wall Refrigerator D3Wall Single Door D1Wall Wine Rack Scalloped D11White B1Whitebay II Arch A7Whitebay II Square A8White Ceramic Knob K20White Fusilli Pull K22Windmere Corbel Large K18Windmere Corbel Small K18Windmere Foot K18Windmere Leg Base K18Windmere Rope Molding K15Wire Tray Divider Kit E29 Wire Tray Divider Roll-Out E30
Inde
x
IndexO4
Looking for Merillat Classic® sales support? These resources can help.
©2013 Masco Cabinetry LLC. Merillat Classic® 6/13. Legal:#178805
Masco Cabinetry LLC warrants to the original consumer purchaser that our Merillat Classic® cabinetry will be free from defects in material and workmanship under normal use for a period of TWENTY-FIVE (25) YEARS from date of purchase. This warranty is not transferable. No changes or modifications can be made to this warranty except by an officer of Masco Cabinetry LLC.
Masco Cabinetry LLC may elect to repair or replace any defective Merillat Classic® product covered by our warranty.THIS WARRANTY DOES NOT COVER:
• The natural aging or darkening of wood color, or the inherent growth characteristics of, or variation, in wood. • Defects caused by misuse, abuse, negligence, alterations, environmental conditions, improper installation,
storage or handling.
As with other natural materials, wood is affected by environmental factors such as natural and artificial lighting. Darkening or mellowing of the wood can be expected and is a natural process of wood as it ages. Each wood species also exhibits its own distinctive patterns and characteristics that add to its natural beauty. These variations in color and characteristics are not considered imperfections or defects.
Masco Cabinetry LLC further provides a Lifetime Limited Warranty on the door hinges and drawer guides to the original consumer purchaser for as long as you own the product. This Lifetime Limited Warranty provides that the door hinges and drawer glides will be free from defects in material and workmanship under normal use. Replacement hinges and drawer glides are subject to their availability from our suppliers.
From time to time, we will change design, specifications and materials as conditions require and improvements are developed, but we have no obligation to incorporate such changes in products we previously manufactured.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF USE, OR LABOR EXPENSES IN UNINSTALLING OR INSTALLING ANY MATERIAL OR PARTS, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, TORT, OR ANY OTHER LEGAL THEORY, EVEN IF MASCO CABINETRY LLC HAS BEEN ADVISED OF THE POSSIBILITY THEREOF. MASCO CABINETRY LLC DISCLAIMS RESPONSIBILITY FOR DAMAGES IN EXCESS OF YOUR PURCHASE PRICE. Some provinces and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty is only valid in the United States of America and Canada. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and from province to province.
To obtain performance under this warranty, you must contact your Merillat Classic® supplier and report, in writing, all defects claimed and provide your original sales receipt or other documentation acceptable to Masco Cabinetry LLC. If you have difficulty obtaining assistance, write to: Merillat Classic® Warranty Department, Masco Cabinetry LLC, 4600 Arrowhead Drive, Ann Arbor, Michigan 48105 USA
For cabinetry purchased on or after January 5, 2009
Masco Cabinetry LLC 25 Year Limited Warranty.
Merillat.comThis consumer-facing website offers many ways to inspire organizational solutions in beautiful cabinetry options, as well as drive business to our dealers. Here are some highlights:
• View inspirational designs and photos.• Download floor plan drawings from photosets to gather design ideas.• Visualize door styles by wood species and finish.• Use the “Features & Accessories for Your Lifestyle” to view
organizational solutions by room type.• Engage consumers by directing them to the “Step-by-Step Kitchen
Planner” to create a mood board to share with their designer.• Educate consumers about wood characteristics, installation, Merillat
sustainability initiatives, and dos and don’ts of cabinetry care.
MerillatBusiness.comIf you’re not currently registered for MerillatBusiness.com, you could be missing important product and brand information that can assist you with your Merillat sales efforts. It’s quick and easy, so visit the site and register today. It will enable you to:
• Check order status.• Download or order product literature, like the product brochure,
specification and price books, door/style finish codes, and 20-20 Design updates. (For questions on 20-20 Design, email [email protected].)
• Download promotional materials, such as brand campaign print ads, direct mail postcards, videos and counter cards.
• Order samples and displays, like wood chips, selection centers, and sample doors and backer cards.
Automated Orders proCAB™proCAB™ is an online, web-based, real-time order management solution available for Merillat Cabinetry product lines. Sign up today if you don’t already have an account. Benefits of proCAB™ are:
• Order Entry and Inquiry• Import Kitchen Designs from 2020• No Charge Shortage and Damage Ordering• Quote Order Capabilities• Expedite Requests• Shipment Status Inquiry• Product Inquiry Search• Document Imaging to retrieve copies of acknowledgements, invoices,
and shipping reports• ACH electronic payment of your invoices• Outstanding Invoices• View open and paid invoices• View check number that paid a specific invoice and payment receipts
For more information, please contact us directly at(866) 628-1621 or [email protected]
Order Confirmation and TrackingYou can monitor your order using Merillat Business or proCAB. Simply login to review your confirmation that your order has been received and to also track its progress.
Merillat Classic® Cancellation PolicyMerillat Classic® cabinetry is made to order. That means we don’t start building your cabinets until your order is placed. Due to our fast 10-day shipping schedule, orders are fulfilled as quickly as possible, affecting our ability to accept cancellations. To consistently maintain the quick 10-day shipping schedule, our policy is that orders cannot be canceled once placed.
Merillat Customer Care ResourcesElectronic means are convenient, but sometimes you just need to talk to a person, and Merillat Customer Care consultants are here to help. Your consultant can help you:
• Order product.• Follow up on orders or track delivery progress.• Discuss product situations or address invoice questions.
Your Merillat® Account Manager is there to help you … every step of the way. Make sure to contact them whenever you have questions, concerns or need information.
Additional assistance is available through Customer Care:(855) 896-9803 or [email protected] M-F 8:00 am – 6:00 pm EST For Order Placement:Fax (866) 998-4432 or [email protected]
Merillat® cabinetry carries the seal of the Kitchen Cabinet Manufacturers Association (KCMA) Certification Program, which assures that our cabinets meet or exceed the rigorous standards set by the American National Standards Institute (ANSI). Our cabinets are also independently tested to ANSI/KCMA A161.1–2000 and paragraph 611–1.1, “HUD Minimum Property Standards–Housing 4910.1” 9-8-86. Merillat Cabinetry demonstrates its commitment to environmental sustainability through meeting or exceeding the requirements as outlined in the Environmental Stewardship Program certification, administered by the KCMA. All Merillat Cabinetry facilities have also obtained ISO 14001 certificate of approval, demonstrating our commitment to reducing the impact of operations on the environment.
©2015 Masco Cabinetry LLC. Printed in the USA (203213) R 6/15
Merillat.com