IDEAS DRIVING RESULTSEFFICIENCY AND QUALITY.
MERITOR®
ALLFIT FASTSET™ NO REAM KING PIN KIT
Save Time And Money During InstallationThe FastSet™ No-Ream King Pin Kit eliminates the need for reamers, presses and pressing in the bushings during installation. Available in multiple pin diameter and length sizes to fit your application.
Advantages• No pressing-in of bushings needed during installation• No reaming necessary on king pin bushings• Metal-to-metal componentry, for added strength
Cross Reference - ALLFIT FastSet™ No Ream King Pin Kit
AllFit FastSet™ Kit Application STEMCO KAISER Qwik KitR203095* MERITOR FG941, FG931, MFS13, MFS14 KG931R
R203096 MERITOR FL941, FL931, FL933, FL943 KH931L
R203097 MERITOR FF941, FF931 K931L
R203098 MERITOR FF961, MFS10, MFS11, MFS12, MFS13 K961L
R203094 MERITOR MFS73, MFS16, MFS18 K180R
R203099 DANA I132SG, I140SG, I140S, I140W K141S
R203093 MACK/VOLVO # FXL12, 14600 # FXL 14.6, 9000 # FM9, 12000 # FM12 K536M
For detailed installation instructions, please see notes inside kit packaging or alternatively, download instruction flyer TP1634 via Literature On Demand at www.meritorpartsexpress.com.
Also Available:T-Handle tool used to install the FastSet™ No Ream Spiral Bushings • Fits all FastSet™ Spiral Bushings• Helps make installation even faster and easier• 6” Handle• Part Number R212087• Made in the USA• Competitor tools can be used on the kits
Meritor Heavy Vehicle Systems 50 Calarco Drive DERRIMUT VIC 3030 AUSTRALIA
Phone: (+61 3) 8353 6050Fax: (+61 3) 8353 6060Email: [email protected]
meritorpartsxpress.commeritor.com
MFL042 - 07/17
*Key Length for Kit R203095*Kit R203095 comes standard with key # 7X1003. Please note if you are replacing king pin kit for an older axle (pre 2001 production), you may need keys (x 2) with a smaller length i.e. # 7X112. Part # 7X112 is available for purchase separately. See image below.
7X1003 - Length: 3.25” Part of Kit R203095
7X112 - Length: 2.81” Only to be used with older steering axle beams.
FastSet™ No Ream King Pin Kits