Professional Metal Roofing Solutions

METAL-LINE

Klöber - your expert partner for roofing supplies

1

Universal roof ducts ............................................................................................................... 2-3

High-performance ventilation solutions .................................................................................... 4-6

The Venduct® productsystem: snug-fitting and functional ........................................................... 7-9

Pipe collars ............................................................................................................................ 10

Easy-Form® plus / Easy-Form®: flexible, rainproof flashing solutions ............................................ 11

Ridge rolls for optimal air circulation and rainproofing ............................................................... 12

Components for ventilation of eaves ........................................................................................ 13

Permo® sec SK / Grid sec: vapour-permeable, textured separation layers ............................... 14-15

Permo®: vapour-permeable and rainproof underlays ............................................................ 16-17

CONTENTSPROFESSIONAL SOLUTIONS, BY PROFESSIONALS,

FOR PROFESSIONALS

leading specialists in high-quality, innovative roofing and wall supplies. Our range

includes supplies for pitched roofs and flat roofs, as well as for walls and façades. Klöber’s end-to-end solutions complement the classic product portfolio and tailored to functions such as ventilation, wind- and draughtproofing, insulation, energy effi-ciency, connectors and fastenings, as well as roof safety. With our professional, innovative solutions we improve the functional and aesthetic quality of buildings – and provide our partners with real competitive advantages in the process.

Universal products with an excellentcost/performance ratio We offer standard as well as specialised products, all of which distinguish themselves by their high quality, reliability, long life and an excellent cost/performance ratio. Most products can be integrated with complete systems, making us a “one-stop shop” for our customers. Our products comply with the latest industry standards and legal requirements and have been developed to be all-purpose, meaning they can be combined with a variety of wall and roof materials. This makes planning and work easier for the end user and increases reliability in the area of functionality

reliable expert partner for commerceand tradeWith our decades of experience, comprehensive market knowl-edge and expertise, we are able to follow current trends in conversions, building and architecture and continually develop our range accordingly. In doing so, we work closely with leading centres of research and developent and architects’ associations.

You can find out more about our portfolio at our website www.kloeber.de:

� Thermo-Line on-roof and façade insulation � Pitched roof vents � Ridge, hip, valley & eaves � Roof underlays, moisture barriers & accessories � Wall and chimney flashings � Roof safety & fastenings � Roof exit hatches & transparent/translucent tiles � Flat roofs � Solar-Line � Metal roofs

Universal waste gas duct

This duct is equipped with a waste gas adapter and is suitable for waste gas system ducting attached to low-temperature heating systems, up to 120°C (e.g. oil or gas boilers), or ventilation ducts. For roof pitches from 5°-45°.

KE 9565

Universal duct

This duct is equipped with a galvanised steel cone (optional powder coating) and includes a rain cover. It is suitable for waste gas ducts up to gas temperatures of 120°C and for ventilation ducts. For roof pitches of 5°-32°. Ask about higher-angled pitches.KE 9711 (galvanised cone)KE 9721 (cone with black coating)

Universal ventilation hood

This duct is equipped with a ventila-tion hood and is suitable for use with line breathers or room ventilation sys-tems. The ventilation pipes are made of galvanised steel and insulated. For roof pitches from 5°-45°.

KE 9526

Permanent bond: factory-made cone and collar seal

Cone for waste gas adapter or ventilation hood Plastic solar duct (polypropylene) � Outside of collar raised at least 10mm from cone and sealed with sealing and fixing adhesive

Galvanised steel duct cone � Inside of collar raised at least 10mm from cone and sealed with sealing and fixing adhesive

Klöber universal duct in conjuction with sealing and fixing adhesive

The impermeability of this application has proved itself over many years of use. In ad-dition, in-house laboratory tests for mois-ture, temperature- and UV-resistance have demonstrated the long-term reliability of this joint.

Materials

Polyisobutylene (PIB) collar with expanded aluminium insert and surrounding butyl rubber bead, covered with split plastic release foil � Surface is self-bonding

Universal solar duct

For rainproof ducting for solar thermal system pipes as well as photovoltaic systems. For roof pitches of 5°-65°. Maximum pipe diameter 31 mm (with cap) or 45mm (without cap). KE 9070 (for 1 pipe)KE 9270 (for 2 pipes)

Product variants Item No.Universal waste gas duct KE 9565Universal ventilation hood KE 9526Universal roof duct (galv. cone) KE 9711Universal roof duct (cone w/black coating like RAL 9005) KE 9721Universal solar duct (for 1 pipe) KE 9070Universal solar duct (for 2 pipes) KE 9270

Colours Colour No � red (RAL 8004) -9804 � grey (RAL 7030) -9730 � anthracite (RAL 7021) -9721

Diameters: � Universal waste duct (KE 9565): ø100 mm - ø160 mm

� Universal ventilation hood (KE 9526): ø125 mm - ø200 mm

� Universal roof duct (KE 9711 / KE 9721): ø100 mm - ø630 mm

� Universal solar duct (KE 9070 / KE 9270): maximum pipe diameter 31mm (with cap) or 45mm (without cap)

Accessories: � Sealing and fixing adhesive for rainproof fastening of the duct to the roofing sheet, 290ml pot, colours: red, anthracite, grey KE 9125

� Profile filler (styrofoam) as corrugation filler and for the prevention of standing water in the area around the duct Dimensions 60 x 50 x 415 mm KE 9126

� Universal bracket for ventilation pipes for fixing ducts in gaps between rafters, available for pipes with diameters of ø250mm – ø400mm KB 9730

� M-Flex connecting tape to extend duct collars. Colours: red, anthracite, grey - Roll 280 mm x 5 m KW 9728 - Roll 560 mm x 5 m KW 9756

2 3

Klöber’s universal ventilation and ducting solutions can be used with various metal roof profiles. Alongside ventilation hoods, the product range includes various ducts for flue and ventilation sys-tems as well as for solar pipes. With the self-adhesive collar, prod-ucts can be quickly attached to metal surfaces without special tools – no addit-ional mechanical fixing is required. If the collar is ap-

plied correctly, the bond on the metal surface, especially near the joint running in the opposite direction to the flow of water, remains watertight long-term.Furthermore, the bond makes it possible to position ducts anywhere on the roof surface, meaning that there is no need for expensive outlay on additional roofing sheets to reach the ridge.

In accordance with IFBS guidelines, with roof ducts a problem- free water supply is to be ensured. In particular, near the trans-verse joint at the side of the ridge, running in the opposite direc-tion to water flow, a permanent seal is an essential part of a functioning intersection solution. Klöber’s universal ducts, used in combination with sealant and fixing adhesive, make a perma-nent, watertight bond with the metal surface possible. As a result, ducts are fully repositionable. The following handling guidelines, however, should be observed:

� Avoid standing water in the area to the side of the ridge by using an appropriate base (e.g. profile filler)

� Quick applicaion of an open flame to the transverse joint to remove the oil film covering the metal and reduce the surface tension of the skirting material

� Complete sealing of the abutting edge with sealing and fixing adhesive

UNIVERSAL ROOF DUCTS

UNIVERSAL PIPE COLLARS

Range of application � Can be used on roof pitches of 5°-65° (maximum pitchvaries according to product)

� Suitable for various roof coverings, e.g. trapezoidal and sand-wich profiles, corrugated profiles, metal tile profiles and flat coated steel profiles

Product benefits � Permanent, leakproof roof penetration thanks to Klöber system accessories

� Freely positionable on roof covering, sheet metal coverings or roofing sheets not required

� Does not degrade when exposed to UV � Professional installation without the need for specialist tools � Collar can be extendended to desired length thanks to self-bonding surface

� Available in various diameters � Environmentally friendly, lead-free construction

Technical information (collar) � Weather-, ageing- and deformation-resistant � Fire protection class E � Stability at temperatures between-40°C and +100°C following DIN 52133

� Application temperature range +5°C to +40°C

Components for duct sets Item No.Line breather pipe ø 110mm KE 9809-11Ventilation pipe ø 125mm insulated KE 9809-12Ventilation pipe ø 160mm insulated KE 9809-16

Roof vent ø 125mm insulated KE 9819-12Roof vent ø 160mm insulated KE 9819-16

Duct pipe ø 110-155mm KE 9865-11

Components for XL duct setsXL ventilation pipe ø 200mm insulated KE 9809-20XL ventilation pipe ø 250mm insulated KE 9809-25

XL Duct pipe ø 175-250mm KE 9865-17

Product variants for solar ductsSolar set for profiled metal roofs KE 9871Solar set for tiled profiles KE 9872Solar set for flat metal profiles KE 9873

Colours (name) Colour No � red (like RAL 8004) -9804 � grey (like RAL 7040) -9740 � anthracite (like RAL 7015) -9715

Other colours available on request

AccessoriesConnecting collars and tubessee p9 - Venduct® product system accessories

4 5

HIGH-PERFORMANCE VENTILATION SOLUTIONS

Klöber has a range of specialist products with excellent ventilat-ing properties particularly for applications which demand high air extraction performance, (e.g. kitchen extractor hoods, controlled ventilation). The range includes, for a start, roof duct sets for varous roof materials as well as various ventilation pipes and roof vents.

With the exception of line breathers (diameter 110mm), all ventila-tion pipes are insulated to prevent condensation.

Range of application � Can be used on roof pitches from 5° - 48° (maximum pitch depends on model of duct and installed elements)

� Suitable for various metal roof coverings, e.g. profiled metal sections (trapezoid and corrugated profiles), tiles and laminated sheets*

Product benefits � Very high ventilation properties � Ventilation pipe available with optional integrated fan � Insulation impedes buildup of condensation � High weather resistance and UV-stable � Duct sets and components can be combined moduarly � Fixing and sealing adhesives included in delivery � Available in various diameters � Duct sets also available for solar pipes

Duct set For profiled metal

roofs (e.g trapezoid/corru-

gated)

� Profile height must be no greater

than 38mm)

KE 9831

Duct set for tiled profiles

� Height of tile indentation must be at least 350mm

KE 9832

Line breather ø 110 mm

� Polypropylene outer casing and

inner pipe

Duct set for flat metal profiles*

KE 9833

Also in XL size, for ventilation pipes and roof vents of ø 200mm and above

KE 9833-XL

Ventilation pipe (ø 125mm

and 160mm) XL ventilation

pipe (ø 200mm und 250mm)

� Polypropylene outer casing � Insulated � Galvanised steel inner pipe

Solar duct sets For cable feed-through from solar collectors as well as other cables and pipes. Available for pipes with a cross-sectional area of up to 100 x60mm

Pipe opening (ø 110-155mm)

XL pipe opening

(ø 175-250mm)

� With tiere EPDM seal � Made from polypropylene

Duct set for Decra® metal

profiles

KE 9834

Roof vents (ø 125mm and

160mm) XL roof vents

(ø 200mm and 250mm)

� With integrated, energy-efficient and high-performance DC motor

� Polypropylene outer casing � Insulated � Galvanised steel inner pipe

Materials � Duct sets and outer casings of ventilation pipes made from high-quality polypropylene (PP)

� Insulation made from polystyrene � Inner pipe of line breathers made from polypropylene � Inner pipe of waste gas pipe/roof ventilator made from galva-nised steel sheeting

Technical information � Weather-, ageing- and deformation-resistant � High UV stability � Temperature resistance from -30°C to +80°C

Alongside the basic ventilation range, other pipe and solar pipe duct solutions are available.

* Use with traditional standing seam roofs does not conform to current technical regulations and is thus to be agreed upon separately by the contractor or designer.

Colours � wine red (RAL 3005) � brown (RAL 3011) � moss green (RAL 6005) � anthracite (RAL 7016) � copper red (RAL 8004) � red-brown (RAL 8012) � grey-white (RAL 9002) � deep black (RAL 9005)

more colours available on request

Colour No-9305-9311-9605-9716-9804-9812-9902-9905

VENDUCT®: SNUG-

FITTING & FUNCTIONAL

6 7

HEALTHY LIVING THROUGH CLEAN INDOOR AIR

Clean, healthy indoor air is not a given. In their living spaces, people and pets are constantlly exposed to impurities in the air. A house must be able to breathe in order to remain healthy and consequently be able to provide a healthy indoor climate. Well-insulated houses need an efficient ventilation system to refresh and cleanse indoor air. Stale and damp air (from dust, odours, smoke, boiling water and sanitary facilities, for example), which are not borne out of the building in a controlled way, sooner or later cause serious harm.

Effective ventilation is also a requirement in commercial and industrial areas, since additional impurities can arise from ma-chines, installations or, in industrial areas, raw materials and chemicals. It is preferable to get rid of waste air from domestic appliances throught the roof, since in this way, noise and odours can be minimised. Klöber waste air pipes and roof fans, in com-bination with the various roof duct sets as part of a ventilation sys-tem, ensure a constantly healthy indoor climate and help prevent moisture damage.

VENTILATION PIPES(NATURAL VENTILATION)Range of application � Line breathers � Ventilation of bathrooms, toilets, kitchens or production/ admin-istration areas

� Suitable for independent ventilation systems, central ventilation systems (e.g. domestic ventilation systems) or extractor hoods (with existing fan)

Product benefits � Pipe diameters of 110mm – 250mm available, therefore suit-able for commercial or industrial areas as well as in private buildings

� Excellent ventilation properties � Insulation impedes condensation � Weather- and UV-stable materials

ROOF VENTS (MOTORISED VENTILATION)Range of application � Controlled ventilation or living spaces and production/ admin-istration areas

� Siphoning off of damp air from bath- and wetrooms � Direct connection to extractor hood enables effective kitchen ventilation with little odour

� Ventilation of lift shafts and other common areas in residential or office blocks

� Selective ventilation of garages and store rooms

Product benefits � Pipe diameters of 125mm – 200mm available, therefore suit-able for commercial or industrial areas as well as in private buildings

� Extremely high ventilation due to high-performance DC electric motors

� Use of efficient EC motors makes energy savings possible � 0-10V controller allows for continous remote control and makes integration with other domestic technologies easier

� Continuous ECo control available on request � Low interior noise, as fan installation is located on roof

PERFORMANCE DATA FOR VENTILATION PIPES

PERFORMANCE DATA FOR ROOF VENTS

VENDUCT® PRODUCTSYSTEM

Range of application � Depending on the component, can be used on roofs of any pitch or on roofs of pitches betwee 20° and 50°

� Suitable for various tiled profiles and flat metal sheets

Product benefits � Slim bases look better on roof � Due to their modular character, many different components can be combined with the base

� Butyl seal specially-prepared before leaving factory � Fixing screws included � Simple and quick fitting � Comprehensive system accessories available

Materials � Bases and components: rigid PVC � Flexible connecting tube: flexible PVC

Technical information � UV-, Weather-, ageing- and deformation-resistant � Construction material class B2

VENDUCT® PRODUCT SYSTEM OVERVIEW

As standard, all Venduct® bases are provided with a factory-fitted butyl seal on the underside. The seal is protected by foil, so that bonding only takes place at installation. The bases also have 6 fix-ing points on the flange. Fixing is achieved by means of the special screw/washer combinations provided, meaning all the components for a quick, permanent and rainproof installation are included in the box.

The snug-fitting Venduct® system is suitable for fitting on flat and profiled metal roofs. The product system has proved itself over many years in the pitched roof sector and includes ventilation solutions for line breathers and room ventilation as well as for rainproof ducting of antenna poles, solar and waste gas pipes.

SNUG-FITTING AND FUNCTIONAL

8 9

Product variant components � Venduct®ventilator pipe long DN100 KE 8009-1 � Venduct® ventilator pipe long (DN100 to connection DN125) KE 8008-1

� Venduct® ventilator pipe short (DN 100) KE 8026 � Venduct® waste gas pipe adaptor (System 70/110mm) KE 8060

� Venduct® waste gas pipe adaptor (System 80/125mm) KE 8065

� Venduct® solar adaptor KE 8080 � Venduct® antenna duct KE 8033

Flexible connector tube � Length 50cm, grey, top connection DN 100, bottom connection DN 100/70 KE 8042

� Length 50cm, black, top connection DN 100, bottom connection DN 100 KE 8047

� Length 62cm, black, top connection DN 125/100, bottom connection DN 100/70 KE 8048

Colours Colour No � wine red (RAL 3005) -9305 � brown (RAL 3011) -9311 � moss green (RAL 6005) -9605 � anthracite (RAL 7016) -9716 � copper red (RAL 8004) -9804 � rot-brown (RAL 8012) -9812 � grey-white (RAL 9002) -9902 � deep black (RAL 9005) -9905

more colours available on request

Accessories � EPDM outlet vent collar for sealing pipes DN 100-125 KU 8001

� TP outlet vent collar for sealing pipes DN 90-150 KU 8004

� Self-adhesive cable outlet collars 8-12 mm KE 8092 15-22 mm KE 8093 25-32 mm KE 8094 42-55 mm KE 8090 50-70 mm KE 8091 � Permo TR® plus adhesive tape for fixing outlet vent collars KU 0121-1

Venduct® ventilator pipe (long) Suitable for fan-equipped ventila-tion (e.g. bathrooms, WCs) as well as waste water pipe ventilators. High ventilation properties, reliably removes condensation and easy to install.

� For roof pitches of 20° - 50°.

KE 8009-1 (DN 100)

KE 8008-1 (DN 100 auf DN 125)

Venduct® ventilator pipe(short)

Universal short ventilator for room and waste pipe ventilation. Protrudes from water flow by more than 15cm, despite extremely flat construction.

� Für Dachneigungen ≥ 5°

KE 8026 (DN 100)

Venduct® waste gas pipe adaptor

For a snug-fitting and adjustable ther-mal waste gas pipe system (twin pipe system) duct.

� For roof pitches of 20° - 50°

KE 8060 (System 70/110mm)

KE 8065 (System 80/125mm)

Venduct® solar attach-ment/ antenna tube

Optimal solution for rainproof ducting of pipes and cables (Ø 100-70mm) or antenna and satellite dish masts (22.2-77.5mm)

� For roof pitches of 20° - 50°

KE 8080 (Solaraufsatz)

KE 8033 (Antennenadapter)

Venduct® flexible connector tubes

Flexible connection to compensate for offsets and differences in length be-tween pipe and roof duct.

KE 8042

KE 8047

KE 8048-1

Venduct® base “Szafir“

for tiled roofs dimensions per diagram

KE 4001

Venduct® base“Kron“

for tiled roofs dimensions per diagram

KE 4004

A factory-fitted butyl seal ensures per-manent, rainproof fixing for the base. The seal is protected with foil until in-stallation.

Venduct®base “Elita“

for tiled roofs dimensions per diagram

KE 4002

Venduct®base“Omega“

for tiled roofs dimensions per diagram

KE 4006

Venduct® base“Yoger“

for tiled roofs dimensions per diagram

KE 4005

Venduct® baseClassic“

for flat metal roofs dimensions per diagram

KE 4003

* see. P. 4

10 11

Easy-Form® and Easy-Form® plus are the universal solutions for at-taching roofing materials to protruding or penetrating components (e.g. interfaces with walls, dormer windows or chimneys). In addi-tion, the material is ideal for use with skylights and can, due to its highly-flexible nature, also be used to make a seal around smaller penetrating components, such as steel poles. It an slso be used to repair roof materials.

Pipe collars guarantee watertight ducting of pipes, line breathers, masts and electric cables. The flexible EPDM seal gives the pipe the necessary freedom of movement for temperature-related changes inlength, while at the same time guaranteeing a watertight seal around the duct. The collars are made from high-quality EPDM rubber with a flexible aluminium flange, which distinguishes itself by its high resistance to weathering, ozone and temperature chang-

es. In addition, the EPDM rubber usedis acid- and alkali-resistant, meaning these products can also be used in industrial areas. Col-lars are available in seven different sizes with a diameter of 12 to 660mm, the Retrofit collars (for existing pipes) in two sizes with a diameter of 10-100 and 100-230mm. All pipe collars are avail-able as a complete assembly.

FLEXIBLE, RAINPROOF FLASHING SOLUTIONSPIPE COLLARS

EASY-FORM® PLUS / EASY-FORM

Range of application � Interface with protruding or penetrating components (walls, chimneys, dormer windows or skylights)

� Making seals around penetrating components (e.g. masts or poles)

� Repairs to roofing materials

Product benefits

� Self-adhesive due to all-over butyl layer on underside � Simple to work with, can be easily moulded by hand without the need for special tools

� UV-stable thanks to its crêped aluminium surface � Versatile � Environmentally-friendly, lead not used in manufacture

Easy-Form® plus: � Particularly stable due to additional mesh reinforcement

Easy-Form®: � Highly stretchable (up to 60%) in the direction of rolling

MaterialsAluminium joining roll with all-over butyl layer and weather-resist-ant acrylic finish. Easy-Form® plus has additional mesh reinforcement

Technical information � UV-resistant, does not decompose, weather-, frost-, temperature-and aging-resistant

� Construction material class B2

Item No. Easy-Form® plus: 250 mm x 5 mm KW 4250-05 300 mm x 5 mm KW 4300-05 450 mm x 5 mm KW 4450-05Easy-Form®: 200 mm x 5 mm KW 0200-05 250 mm x 5 mm KW 0250-05 300 mm x 5 mm KW 0300-05 450 mm x 5 mm KW 0450-05 600 mm x 5 mm KW 0600-05

Colours Colour Nored (RAL 8004) -0154dark brown (RAL 8016) -0248anthracite (RAL 7016) -0469zinc grey (RAL 7011) -0470black (RAL 9005) -0450(in 250, 300 & 450mm widths)

Range of applicationSuitable for various metal roof coverings, such as trapezoid, cor-rugated and tiled profiles.

Product benefits � Thanks to the flexible EPDM seal, the pipe’s thermal flexibility is not hindered

� High resistance to weathering, ozone and extreme temperatures � Simple to fit - thanks to the soft aluminium flange, the collar can be bent to optimally fit the roof profile

� Retrofit sets also make it possible to fit collars to existing pipes � All pipe collars are available as complete assemblies, including sealant, screws and clips

MaterialsEPDM rubber with flexible aluminium flange

Technische Daten � Heat restistance sustained +90 °C / for short periods up to +150 °C

� Resistance to cold temparatures sustained -30 °C / for short periods up to -50 °C

� Acid- and alkali-resistant

Variants und Item No.Pipe collars for diameters � 12-90mm (round flange) KE 9866-9 � 75-150mm (round flange) KE 9866-15 � 110-200mm (round flange) KE 9866-20 � 150-280mm (square flange) KE 9866-28 � 180-330mm (square flange) KE 9866-33 � 260-460mm (square flange) KE 9866-46

Retrofit pipe collars for installation on existing pipes � 10-100mm (square flange) KE 9867-10 � 100-230mm (square flange) KE 9867-23

Thanks to the highly-flexible nature of Easy-Form®, it is also very good for enclosing skylights within trape- zoid or sandwich profiles. With its coloured surface, it blends in with the metal profile.

Pipe collars allow a secure feed-through of pipesl ventilation ducts, masts, etc. on various metal profiles

With Easy-Form® plus/Easy-Form®, wall interfaces can be made from one piece or separate pieces/cammed

Easy-Form® plus

Easy-Form®

Pipe set

Retrofit pipe set

12

Rollable ridge solutions are a par-ticular benefit with trapezoidal profiles, in that they can be used with various profiles, thereby re-moving the need to use snug-fitting profile filler

13

COMPONENTS FOR VENTILATION OF EAVES

Range of application Product solutions for eaves ensure the necessary ventilation of back-ventilated metal roof constructions. Combining them with ventilating ridge rolls, results in optimal air circulation, ensuring a reliable escape route to the outside for moisture and condensation. In addition, these products offer secure protection from bird entry and insects.

Product benefits � Perfect ventilation for back-ventilated roofs and façades � Reliable protection from bird entry and nesting insects � Simple and quick installation � Can be used with various depths of profile � Components for eaves can replace the lowest lath

Construction/materials � Eaves components, eaves comb made from PP � Ventilation strips made from rigid PVC

Colour � Eaves component, eaves ventilation component with comb, eaves ventilation comb: red (-0100), anthracite (-0402)

� Ventilation strip: brick-red (-0115), brown (-0200), black (-0450), white (-0900)

ResistanceUV-, weather-, frost-, temperature- and aging-resistant

Ventilation openings> 200 cm2/m

Standard(s) � DIN 4108 Part 3

Eaves ventilated, with or without comb

This reliable ventilation system for eaves even bridges gutter brackets. There is no need for additional laths and no buildup of water can form in the event of precipitation. This eaves component with comb offers reliable prote-ction from bird entry without restricting ventilation.

Eaves ventilation comb

The eaves ventilation comb effectively prevents the entry of birds without restricting ventilation. Can be installed separately or retrofitted to ex-isting eaves ventilation components. The comb fits perfectly any profile to which is is fitted.

Rigid PVC ventilation strips

Klöber ventilation strips are suitable for all back-ventilated façades and roofs. They offer reliable protetion from insect entry and prevent birds from nesting but, with its optimally-sized-holes, enables a very high level of ventilation. In addition, the practical box dispenser, with a 60m roll enables installation in one piece.

TECHNICAL INFORMATION

EAVES COMPONENT EAVES COMPONENT W/COMB EAVES VENTILATION COMB

Dimensions (L x W) 1000 x 30 mm 1000 x 30 mm 1000 mm

Comb height - 60 mm 77 mm 60 mm 120 mm

Pack 100 pc/box 50 Pc/box 30 Pc/box 300 Pc/box 150 Pc/box

Item No. KR 0058 KR 0057 KR 0046-2 KR 0065 KR 0173

VENTILATION STRIP

Roll length 5 m 60 m

Width 50 mm 80 mm 100 mm 150 mm 180 mm 50 mm 80 mm 100 mm

Pack (m/box) 100 m 100 m 100 m 50 m 50 m 60 m 60 m 60 m

Item No. KR 5050 KR 5080 KR 5100 KR 5150 KR 5180 KR 6050 KR 6080 KR 6100

Area letting air through ca. 58%

Temperature resistance -20˚C bis +80˚C

METAL RIDGE ROLLSROLL-FIX® PREMIUM / COMPACTROLL®

Range of application � Ventilation of metal roofs and protection from driving rain and drifting snow in the ridge area

� With rolls in various widths and with flexible side strips, univer-sally suitable for various profiles

Product benefits � Robust Aluminium-Rolls offer protection from invading insects and birds

� Very good weather resistance and durability � Easy and simple to reposition � Simple to fit side strips to profile due to pleated fringes and secure bonding with butyl adhesive

� Seals the ridge structure (as an alternative to profile fillers), while at the same time being vapour-permeable

Roll-Fix® premiumExcellent ventilation properties due to innovative ventilation tunnel. Particularly suitable for back-ventilated roof constructions for the discharge of condensation on the underside of steel sheets (e.g. trapezoid profiles).

COMPACTROLL® Very good weather resistance and high water impermeability. Par-ticularly suitable for roof constructions without back ventilation (e.g. sandwich profiles) for discharge from the ridge structure as well as meltwater, thanks to its vapour-permeable material.

Materials and propertiesRoll-Fix® premium � Solid aluminium with butyl adhesive and PP nail strip with ad-ditionalmembrane

COMPACTROLL® � Fibrebond/Aluminium composite, aluminium edging with PIB inlay and butyl rubber adhesive underside

Technical information � Fire performance E � Handling temperature +5˚C to +40˚C � Temperature resisitance -40˚C / + 80˚C

Item No. Roll-Fix® premiumKR 3100 (width 290-320mm, roll length 5m)KR 3900 (width 370-400mm, roll length 5m)COMPACTROLL®

KR 4100-10 (width 280mm, roll length 10m)KR 4200-10 (width 340mm, roll length 10mColours Colour Nored -0100dark brown -0200anthracite -0402

RIDGE ROLLS FOR OPTIMAL AIR CIRCULATION AND

RAINPROOFINGRollable ridge solutions are suitable for making rainproof joins. Used with trapezoid or sandwich components, the beading between the pro-files in the ridge area (gabled roof) underneath the ridge sheet is shut off from the rain, meaning there is no need to use profile fillers.

In addition, the used of ridge rolls, in combination with the corre-sponding ventilation in the area of the eaves makes optimal air cir-culation under the metal roof covering possible. Any condensation forming on the underside of the steel panels can escape through the ventilating ridge rolls.

Roll-Fix® premium

COMPACTROLL®

Roof and façade problems solved, with no compromisesThe rainproof, 5-layer and vapour-permeable Permo® sec SK forms a perfect, textured separation layer between metal roof cover-ing and substructure for all metal roofs. In accordance with DIN 68800-2 (Wood Preservation Standard – Part 2 – Structural Protec-tion of Wood), a textured separation layer with a water-diffusing coating must be present in any pitched, fully-insulated, unventilated

roof Item No. KU 0027-1 construction with metal cladding on the formwork or panelling . Any condensation which forms can escape outside through the drainage level. In this way, a buildup of con-densation in the construction can be prevented. The incorporation of a textured separation layer is also recommended with internal gutters, dormer windows and porches.

Grid sec, a part of the wholeGrid sec is a pressure-stable, elastic, ca. 8mm thick mate-rial, but without Permo® sec SK’s rainproof sealing film. It performs Permo® sec SK’s barrier function perfectly when combined with an addition-al felt or waterproof layer, provi-ded it is already installed onsite.

VAPOUR-PERMEABLE, TEXTURED SEPARATION LAYERS AN ELASTIC FABRIC

PERMO® SEC SK

Range of applicationPermo® sec SK is suitable for all back-ventilated and non-back-ven-til-ated metal roofs and metal façades. With its high-quality, elastic fabric it maintains a constant gap between the rainwater-carrying Permo® strip and metal sheet. Due to the pre-assembled butyl rub-ber adh-esive strip, installation at pitches from ≥ 3° is possible.

Product benefits � 5-layer, rainproof covering and drainage level in one � Reduction in noise � Prevention of hot water corrosion � Evens out bumps (nails, warped wood) � Can be fitted without special tools � High-quality, pressure-resistant fabric reliably ensures a gap between metal and rainwater-carrying strip

Handling instructionsIn the case of titanium/zinc covers with pitches of ≥ 3° to 15,ex-trameasures in the form of separation layers with drainage functions are mandatory. Furthermore, in accordance with DIN 68800-2, re-gardless of the type of metal covering,in the case ofnon-back-ven-tilated roof constructions on formwork or panelling, a separation layer is also mandatory. Permo®sec SK complies, in this respect, with the recommendations of all relevant standards and require-ments.

Construction/materials5-layer fibre/foil combination with a polyolefin substratum, ren-dered water-repellent by a monofilament base

Roll width/length/weight1.50m/25m/ca. 21kg

Item No. KU 0027-1

System accessories:Windproof pack � Butylon®

� Pasto®

� Outlet vent collar

Standards/certificates � CE-certified � Technical specification ZVDH � Technical specification ZVSHK

GRID SEC

Range of applicationThe separation layer grid acts as a barrier between metal coverings and substructures. As a separation layer for back-ventilated and non-back ventilated structures of all metal coverings in standing seam technology, Grid sec, when combined with a suitable felt, such as Permo® is extremely suited for use on pitched roofs and façades.

Product benefits � Complements the building process across trades � Can also be used with existing non-vapour-permeable felts � Good noise-reducing properties � Very easy to tear by hand

Handling instructionsIn contrast to the laying of Permo® sec SK, Grid sec should only be laid parallel to the metal sheets. Only a simple mounting of the fabric is needed, as the final fixing is done together with the metal sheets. In this way it is possible to benefit from the advantages of a separation layer with drainage function in different aspects of the building process.

Composition/materials100% monofilament base, three-dimensional textured mat

Roll width/length/area/weight1.40m/25m/35m2/ca. 11.5 kg

Item No.: KU 0028

System accessoriesWindproof pack � Butylon®

� Pasto®

� Outlet vent collar

Standards/certifcates � DIN 18339 � DIN 4108 � DIN 6880 � Technical specification ZVDH � Technical specification ZVSHK

14 15

The fabric

With its ideal width of 1.40 metres it is possible to apply the Grid sec fabric to existing felt by moving the metal sheets step by step

TECHNICAL INFORMATION

Surface density (weight), DIN EN 1849-2 ca. 550g/m2

Colour top-/underside light grey/whiteThickness, factory-inspected ca. 0.85cmFire performance, EN 13501-1, EN 11925-2 EWater impermeability, EN 1928 W1Airtightness 0.1 m3/m2 h 50Pa ca.Vapour permeabilitysd-value, EN 12572 0.03mMaximum tensile force, lengthwise EN 12311-1 320 N/5cmMaximum tensile force, transverse EN 12311-1 290 N/5cmStretchiness, lengthwise EN 12311-1 5%Stretchiness, transverse EN 12311-1 5%Resistance to tearing, lengthwise EN 12310-1 280 NResistance to tearing, transverse EN 12310-1 340 NHandling temperature -30˚C /+80˚CWatertightness, EN 20811 > 3000 mmUV-resistance2), test cons. per EN 13859-1 4 months3)

Self-adhesive strip Butyl2) UDB is not intended for long-term use as a roof covering and must be covered over as soon as possible after insulation. 3) Based on weather conditions for central Europe

TECHNICAL INFORMATION

Surface density (weight), DIN EN 1849-2 ca. 350 g/m2 Pore volumes > 95%Thickness ca. 0.91 g/m3Colour blackFire perf., const. mat. class DIN 4102-1 B2, on file, checkedMelting point > 200˚CUV-resistance2), test cons. per EN 13859-1 4 Monate3)

Resistance to tearing can be torn by handThickness, factory-inspected ca. 0.8 cmHandling temperature -30˚C /+80˚C2) UDB is not intended for long-term use as a roof covering and must be covered over as soon as possible after insulation. 3) Based on weather conditions for central Europe

By incorporating a separation lay-erwith drainage function under a metal roof, any acoustic bridging effects are substantially reduced, meaning a noticeable reduction in noise is achieved.

By incorporating a separating layer with drainage function under a met-al roof, any acoustic bridging effects are substantially reduced, meaning a noticeable reduction in noise is achieved.

Installation can be parallel to the eaves or at the gable end. In the process, the ridge area points in the direction of the ridge or opposite-facing gable end. Thanks to the 1.5m strip width, instal-lation is easy.

Over the period of time that a roof is possibly ex-posed to the elements, a roof must have a layer of protection (e.g. counter battens). Measures to protect the roof from rain may be advisable in the case of longer exposure to the elements, as Permo® sec SK is not intended to function as an emergency covering.

Airtight pack � Wallint® air barriers � Adhesive tape � Outlet vent collar

Airtight pack � Wallint® air barriers � Adhesive tape � Outlet vent collar

� DIN 18339 � DIN 4108 � DIN 68800

Depending on the roof construction, it is advisable to employ a vapour-permeable underlay when laying metal coverings. Their high permeability, in concert with reliable ventilation of the ridge and eaves means any damp air can escape through the roof. The high watertightness of the strips protects the layers under the roof covering from rain and wind-driven snow penetration. Any mois-ture entering the roof structure is borne away by the strip, thereby preventing moisture building up in the barrier layer.

The use of strips can also be a good idea when combined with trapezoid roof profiles. Due to the high heat transfer properties of non-isolated trapezoid profiles, condensation tends to build up on the underside. For the alleviation of this problem, often-used anti-condensation fleeces can only do so much, due to their limited absorbency, pushing some buildings to the limit of their designs as a result. Moreover, moisture stored in the fleeces can lead to foul odours in the wooden structure.

Through the use of roof strips, condensation is permanently ab-sorbed and borne away. In addition, the strip acts as an isolating air layer, significantly reducing existing moisture levels, thus pre-venting a buildup of condensation.

PERMO®: VAPOUR-PERMEABLE AND RAINPROOF

UNDERLAYS

PERMO® EXTREME SK/

PERMO® EXTREME RS SK2

Range of application

Permo® extreme SK � Dächern mitUnderlay/felt under back-ventilated metal coverings on pitched roofs with Through the use of roof strips, condensa-tion is permanently increased requirements

Permo® extreme RS SK2

� Sub-roof strip under metal coverings on pitched roofs for the construction of a rainproof sub-roof area

Product benefits � Highly permeable (sd-Wert 0,08m) � Self-adhesive strips (in combination with system accessories) � allow permanent, watertight bonds between overlapping areas � High temperature resistance up to 100° C � Self-sealing edge ensures a good overlap and improves water � removal � Special layers ensures high watertightness � Stands up to driving rain

Item No. Permo® extreme SK KU 0170-1-09Permo® extreme RS SK2 KU 0171-11

Roll dimensions/weight:Permo® extreme SK 1.5 x 50m /75m2 / 15kg® 2Permo® extreme RS SK 1.5 x 50m / 75m2 / 18kg

16 17

TECHNICAL INFORMATION PERMO® EXTREME SK PERMO® EXTREME RS SK2

Surface density (weight), DIN EN 1849-2 ca. 200 g/m2 ca. 240 g/m2

Fire performance, EN 13501-1, EN 11925-2 E EWater impermeability, EN 1928 W1 W1Vapour permeabilitysd-value, EN 12572 0,08 m 0,08 mMaximum tensile force, lengthwise/transverse EN 12311-1 460 / 300 N/5 cm 310 / 360 N/5 cmStretchiness, lengthwise/transverse EN 12311-1 60 / 90 % 45 / 55 %Resistance to tearing, lengthwise/transverse EN 12310-1 300 / 380 N 215 / 200 NTemperature resistance -40ºC /+100ºC -40ºC /+100ºCWatertightness, EN 20811 ≥ 4500 mm ≥ 4500 mmUV-resistance2), test cons. per EN 13859-1 4 months 4 monthsWeathering as emergency cover 8 weeks 8 weeksDriving rain test TU Berlin passed passed

System accessories

Using Klöber accessories is recom-mended. These are specially-designed to be used with the strips and covered under the guarantee.

Pasto® sealant cartridge

� 1K adhesive for joining underside of Permo® strips to protruding building components.

� 310 ml Kartusche (coverage ca. 10-15m)

KU 0128

Permo® TR plus adhesive tape

� Transparent adhesive tape for airtight bondng of strip overlaps

� Bonding of accessory products (e.g. EPDM outlet pipe collar).

KU 0121-1

Permo® seal

� Viscous 1K sealant for sealng around nails between counter laths and Permo® strip.

� Quick, professional work straight from the bottle

� 1000g bottle (coverage ca. 50m)

KU 0129-01

KE xxxx

Permo® absorber

� Absorbant fleece sealing tape for sealing around nails between counter laths and Permo® strip

� Swells up when absorbing moisture,Improving its sealing properties

� Roll 50mm x 30m (W x L)

KU 0079-1-50

KE xxxx

Permo® extreme sealant paste

� Air-drying 1K PUR sealant for joining Permo® extreme strips to protruding building components, to metal sheets in the eaves and for sealing seams.

� Container size 1 kg

KU 0136

EPDM outlet pipe collar

� Collar for sealing round ducts (fixed with adhesive) DN100 – DN125

� Use Permo® TR plus adhesive tape

KU 8001

KE xxxx

Easy-Form® adhesive tape

� Aluminium joining roll with all-over butyl coating for enclosing/sealing various penetrating elements (e.g. pipes, cables, poles, purlins, spars)

� Repair tape for metal sheets in eaves, gutters, downpipes, valleys or wall coverings.

KW 0060 (60mm width) KW 0090 (90mm width)

Self-adhesive sealing collars � For the rain- and windproof duct-ing of cables and pipes

8-12 mm KE 809215-22 mm KE 809325-32 mm KE 809442-55 mm KE 809050-70 mm KE 8091

Klöber GmbHScharpenberger Str. 72 – 9058256 EnnepetalTel. +49 2333 9877-0Fax +49 2333 9877-199Technical hotline +49 2333 9877-164www.kloeber.deinfo@kloeber.de

BR-ML#DE-0116.Subject to technical modifications 01/16. Publishing this document in whole or in part only with written permission of Klöber GmbH. No liability is assumed for printing errors. Registered trademark of Klöber GmbH.

For further information please visit our website www.kloeber.de or contact one our our sales consultants.