1
2
Metal Pin Badge-In-Depth Report
At North Peak Department-One, our business is totally focused on providing a wide and integrated range of
services in the design, production and distribution of lapel pins, enamel badges, tie clips, cuff-links, blinking pins,
button badges (tin, plastic), trolley coins, name plates, memo holders, key-chains, medals, magnets, bottle
openers, and much more.
We are specialized in manufacturing custom metal pins for more than 20 years. Such a long experience gives us
the expertise to meet your requirement with technological achievement and a total commitment to quality. Your
own designs are most welcome. We can develop your ideas or particular products for you, either exclusive or
non-exclusive basis.
Type of metal pins: Etched brass soft enamel with or without epoxy
Stamped copper/ or iron soft enamel with or without epoxy
Stamped copper hard enamel
Stamped iron hard enamel
Stamped copper hot-fired cloisonné
Stamped 2D in relief with or without sandblasting
Stamped 3D in relief, with or without color resin
Silk-screen/ offset printing on steel/ or aluminum with epoxy
Silk-screen/ offset printing on brass with epoxy, with or without electro-plating
Combination of the different techniques in the same pin, like stamped emblem with printed inlay
Zinc alloy injection soft enamel
Zinc alloy injection hard enamel
Pewter spin casting
Sterling silver 925/ Gold 999
3
Color Material: The colors we use for our enameled and printed pins are of the following
Soft (Hard) enamel: chemical material, different colors to be mixed, matching your references of Pantone
(PMS), HKS color charts
Cloisonne: powders of rock, not to be mixed. Color reference of AOKI only.
Epoxy: It's a kind of crystal polyvinyl acetyl resin, which we put on top of the surface of the metal pieces. There are 2
reasons to use epoxy, one is to protect the colors and the other one is to be shiny. However a lot of customers do
not want epoxy, they want without epoxy items show the relief effect.
Magnets: As you know that we are supplying magnets, which is also a very popular item for promotions only next to, pins.
We wish to give you some information for the items we can do.
Rubber magnets with 2 layers.
One layer of rubber magnet at bottom and one layer of white PVC on top. The printing is on the white PVC.
Thickness of the magnet can be 0.5mm, 1mm, 1.5mm or 2mm. When the printing is process offset, we are
now using white aluminum for the printing and not PVC.
When the printing is process offset, we are now using white aluminum for the printing and not PVC.
Metal emblems in any quality like our pins with the attachment of magnet on the backside. There are 2 kinds of
magnets we are supplying.
Metal magnet in round shape in different sizes in thickness of 3 or 4mm.
Rubber magnet cutting out to be round or rectangular in different thickness of 1mm, 1.5mm, and 2mm.
Adhesive backing: On the backside of the metal emblems, we are in many cases making them with double-sided tape (adhesive
backing) to serve your needs to attach to name plates or other occasions. The tape could be the standard
double-sides tape, or 3M adhesive tape (with some extra costs). Form tapes are also available.
4
Option of electro-plating:
Gold
Nickle
Brass
Copper
Silver
Black nickel
Black dyed
Chrome
Antique gold
Antique nickel
Antique copper
Antique brass
Antique silver
Antique pewter
Matt gold
Matt nickel
Matt silver
Nickel free
Bi-color: gold + silver
Bi-color: matt gold + matt
silver
5
Artworks: It's a kind of crystal polyvinyl acetyl resin, which we put on top of the surface of the metal pieces. There are 2
reasons to use epoxy, one is to protect the colors and the other one is to be shiny. However a lot of customers do
not want epoxy, they want without epoxy items show the relief effect.
LINE ARTWORKS FOR ENAMEL ITEMS
The basic concept is that the enamel item is a combination of metal and colors. We need a kind of line artworks for
our enamel pins and keychains. The key point in the line artworks is to have artworks showing ALL BLACK IN METAL
(or all white in metal).
Special lines needed in Etched brass soft enamel --- A border metal line of 0.8mm is needed for the etched
brass soft enamel items for standard thickness of 0.8mm brass. In principle, the thicker the brass material is,
the wider the borderline is needed.
The border metal line for stamped items (stamped copper, or stamped iron) can be and usually is thin.
Artworks for silk-screen printing items.
The most convenient and ready artworks that we can use are the 1:1 separations, 1 firm for each color. Your line
arts made in CorelDraw and Illustrate and sent to use by e-mail are most welcome.
Artwork for offset printing (or called photo printing of process printing)
The most convenient and ready artworks that we can use are the 4 color separations. It is our suggestion that you
would also make the artworks in computer and e-mail to us. Please note the density that we would like to have is
+/- 355 dpi in the computer file. You will find a separate file mentioning the kinds of software we are using.
Artworks for approval by e-mail.
If you supply for your orders of enamel items artworks other than line artworks, i.e. samples to copy, artworks
need changes, etc. We have to make LINE ARTWORKS before we make the tools (films, molds etc.) It is better to
have your approval first. It is to protect us from making mistakes. Please remind us to e-mail you the line artworks
for approval before we make the tools and we thank you in advance for reminding us.
The differences of silk-screen and offset printing: Offset printing is also referred to as photo printing and process printing. The colors are obtained from the
mixture of the 4 colors of CMYK. It is just like the printing from your photo printer in what you could find the
colored ink is divided by the 4 colors. (Some printer has 3-color system of RGB, which we do not use in our
printing).
Colors of the silk-screen printing are not mixed. They are printed 1 color after another. The colors are also not
of gradual effect and are solid. All the colors could be separated. The swatch references of the colors we use
are according to the Pantone (PMS), HKS and RAL (as used in Europe) and DIC (as usual in Japan).
The production of the offset printing items is to copy your original. The best (and Maximum) quality of the
product is your original. The original limits copying. Therefore it is very sure that the product will never be
better than the original. In order to make good quality offset printing items; we must have GOOD ORIGINAL.
We are very good at the copying and we expect good originals from you. For example, the films are better
6
than the photos.
If you e-mail the artworks or mail film separations or send artworks in disk, please note the density is 355 dpi.
In the silk-screen printing metal items, we have a problem that is never been solved. It is caused by the epoxy we
use.
Why the white is not white: When there is a printing of RED on WHITE or WHITE on RED, customers complain that the white color is PINKISH
or REDDISH. This is actually a VISUAL effect caused by the reflection of the re color under the epoxy. After taking
off the epoxy, you can see that the white is white.
We are very sorry that we still have no solution for this problem. Your explanation to the customers will be helpful
to us.
We have 2 OPTIONS for this problem.
Do not add the epoxy on the top of the pins. Instead, we print a layer of lacquer on top of the printed colors
as a protection.
Change the quality to other types. We can make it in the quality of hard enamel + print. For example, the
background is in red color hard enamel and we print the white on top of the red hard enamel.
Special note:
The above problem is only in the RED, All the other colors are OK.
Why we suggest silk-screen printing: Some of the designs are not very good in the quality of soft enamel (either etched brass, stamped copper or
stamped iron) and we must make them in brass silk-screen printing with epoxy. However a lot of customers prefer
(and sometimes insist) to have their pins done in the quality of soft enamel. This is really a dilemma for us.
The kind of designs we mean in the above is, for examples, the texts need to be done in a color on the background
of another color.
We are depending on yours sales persuasiveness to solve this kind of problems for us.
We have 2 OPTIONS to help you.
We can make the pins in brass silk-screen printing with epoxy, while at the same time, leaving metal
separation lines in the design. So you can still see that metal lines separate the different colors. One
exception is in the very small details and we might have to skip the metal lines.
To make the pins in hard enamel + print. For example, the text can be printed in color on the hard enamel of
the background.
Shine & matt: In our STAMPED metal product lines, there are raised parts and recessed parts. The recessed parts are usually
filled with soft enamel or hard enamel colors and the raised parts are polished and plated. Nevertheless, a lot of the
items are done without colors (for pars or whole) to have the comparison of SHINE & MATT. Let us study how this
7
kind of comparison can be gained.
A good polishing does the shining raised parts.
The dull effect of the recessed parts can be done in several different ways.
1. Sandblasting to the recessed parts. This is exactly as our types of SANDY items --- Stamped copper raised and
polished + recessed and sandblasted. Using antique plating.
2. Antique plating is the best way to show the mat effect. We have different kinds of antique plating as listed
below.
Antique gold
Antique silver
Antique brass
Antique copper
Antique nickel
3. Engraving Stippled background. This could be described as – Raised and polished + recessed and stippled.
Pin Attachments
Butterfly clutch Rubber butterfly
clutch
Safety pin Flat tie tack Deluxe tie tack
Strong magnet Black hard magnet Screw with cap U spike Long needle with
cap
8
Lapel Pins – Silk-screen/ Offset Printed with Epoxy Process: artwork >> seperate colors >> make films >> make screens (silk-screen print) and PS board (offset print)
>> print >> die cut >> without plating: cover epoxy; with plating: electroplate cover epoxy >> attach butterfly
clutch >> packing and packaging
D107001 D107002 D107003 D107004
D107005 D107006 D107007 D107008
Logos/ Designs shown for reference only. No re-production without authorization of the owners.
Lapel Pins – Brass Etched with Soft Enamel Process: line art >> films >> exposure of the brass plates >> etching onto the brass plates >> enamel filling >>
polish >> die cut >> electroplate (cover epoxy, either by hand or by the spraying machines) >> attach butterfly
clutch >> packing and packaging.
D101001 D101002 D101003
D101004 D101005
Logos/ Designs shown for reference only. No re-production without authorization of the owners.
9
Lapel Pins – Copper Stamped with Hard Enamel Process: line art >> etching a small brass plate with the line art >> mold engraving >> stamp >> die cut >> hard
enamel filling >> stone polish >> cloth polish >> electroplate >> (add pad print) >> attach butterfly clutch >>
packing and packaging
D103001 D103002 D103004 D103005
D103006 D103007 D103008 D103010
D103009 D103003
Logos/ Designs shown for reference only. No re-production without authorization of the owners.
10
Lapel Pins – Copper Stamped with/without Soft Process: line art >> etching a small brass plate with the line art >> mold engraving >> stamp >> die cut >>
polish >> electroplate >> enamel filling >> clean the colors >> (add transfer print) >> cover epoxy >> attach
butterfly clutch >> packing and packaging
D104001 D104002 D104003 D104004
D104005 D104006 D104007 D104008
D104009 D104011 D104013 D104014
D104015 D104016 D104017 D104018
D104019
Logos/ Designs shown for reference only. No re-production without authorization of the owners.
11
Lapel Pins – Iron Stamped with/without Soft Enamel Process: line art >> etching a small brass plate with the line art >> mold engraving >> stamp >> die cut >>
polish >> electroplate >> enamel filling >> clean the colors >> (add transfer print) >> cover epoxy >> attach
butterfly clutch >> packing and packaging
D105001 D105002 D105003 D105004
D105005 D105006 D105007 D105008
D105009 D105010 D105011 D105012
D105013
Logos/ Designs shown for reference only. No re-production without authorization of the owners.
12
Lapel Pins – Pewter Spin Casting
D106001 D106002 D106003
D106004 D106005 D106006 D106007
D106008
Logos/ Designs shown for reference only. No re-production without authorization of the owners.
Lapel Pins – Sterling Silver 925
D190001 D190002 D190003
Logos/ Designs shown for reference only. No re-production without authorization of the owners.
13
Lapel Pins – Zinc Alloy Injection with/without Hard/Soft Enamel
D108001 D108002 D108003 D108004
D108005 D108006 D108007 D108008
D108009 D108010 D108011 D108012
D108013 D108014 D108015 D108016
D108017 D108018 D108019
Logos/ Designs shown for reference only. No re-production without authorization of the owners.
14
Awareness Pins (Metal) The pink ribbon is an international symbol of breast cancer awareness. Pink ribbons, and
the color pink in general, identify the wearer or promoter with the breast
cancer brand and express moral support for women with breast cancer.Pink ribbons are most commonly seen
during National Breast Cancer Awareness Month. The blue ribbon is a term used to describe or symbolize
something of high quality. The usage came from The Blue Riband, a prize awarded for the fastest crossing of
the Atlantic Ocean by passenger liners—and prior to that from Cordon
Bleu which referred to the blue ribbon worn by a particular order of knights. The
spelling blue riband is still encountered in most English-speaking
countries, but in the United States, the term was altered to blue ribbon, and ribbons of this color came to be
awarded for first place in certain athletic or other competitive endeavours (such as county and state fairs).
It also may be applied to distinguished members of a group or commission who have convened to address
a situation or problem; the usual usage is "blue ribbon commission" or "blue-ribbon panel".
The French for the term is 'Cordon Bleu' which is also used in English-speaking countries. The red ribbon, as an awareness ribbon
colored red, has several different meanings in different contexts. Foremost, it is the symbol
of solidarity of people living with HIV/AIDS. The yellow ribbon is used for various purposes. It
is often worn on one's person or tied around a tree in one's front yard. The white ribbon, a
white-colored ribbon or representation of a white-colored ribbon, has several different meanings depending on the
context. As with other color ribbons, is sometimes used by political movements to signify or spread their beliefs.
In that context, it is usually worn on garments or represented in propaganda (posters, leaflets, etc.). The White
Ribbon has been the badge of the Woman's Christian Temperance Union founded by Frances Willard since its founding in 1873.
The WCTU is the oldest continuing non-sectarian women's organization
worldwide. The white ribbon bow was selected to symbolize purity.[1] The WCTU
traditionally uses the bow rather than the more modern "remembrance" loop.One
of the most notable usages of the white ribbon in recent times is as the symbol of
violence against women, safe motherhood, and other related causes.
It also has a long tradition in state fairs and similar farming and horticultural competitions in the United States
and Canada. The green ribbon has been used as a symbol for many campaigns, including environmental justice,
cannabis-liberation, agriculture and to show support for legalized forms of pornography and sexual content. A
purple ribbon is worn to raise awareness for various causes, including:˙Domestic violence
˙Pancreatic cancer ˙Animal abuse ˙Proportional representation voting system for UK
elections (May 2010) ˙Xenophobia and Homophobia (Austria 2009) ˙Overdose Prevention ˙Eating
Disorder Awareness ˙Alzheimer's disease ˙Crohn's Disease ˙Cystic Fibrosis ˙Epilepsy ˙Huntington's disease ˙Lupus
˙Fibromyalgia ˙Arnold-Chiari Malformation ˙Religious tolerance ˙Homelessness ˙Victims of 9/11 ˙Macular
degeneration ˙ADD and ADHD ˙Sarcoidosis ˙Pediatric stroke ˙Gastrointestinal cancer
˙Thyroid cancer[1] ˙Ulcerative Colitis ˙Wildland Firefighters A brown ribbon is a type
of award given to winners of various contests. At county and state fairs in the United States, a brown ribbon is the
award for placing eighth in a contest. In Nazi Germany, the "Brown Ribbon" was an annual July horse race run in Munich from
1934 to 1944.
15
Red Ribbon: Fight against AIDS and HIV
D121001A
AIDS Awareness Metal Pin adges (Large & Narrow)
Red Enameled Pin in Gold Shine,
Back with Butterfly Clutch
Color: pms186c
D121001B
Breast Cancer Awareness Metal Pin
Badges (Large & Narrow)
Pink Enameled Pin in Gold Shine,
Back with Butterfly Clutch
Color: pms182c
For Breast cancer awareness, birth parents, and childhood
cancer awareness
D121001C
Childhood-Cancer Awareness
Metal Pin Badges (Large &
Narrow)
Light Blue Enameled Pin in Gold Shine,
Back with Butterfly Clutch
Color: pms283c
Light Blue Ribbon is a symbol of childhood cancer
D121001D
Hope Awareness Metal Pin
Badges (Large & Narrow)
Yellow Enameled Pin in Gold Shine,
Back with Butterfly Clutch
Color: pms102c
Yellow ribbon pin means support our troops, hope
D121001E
Anti-Violence Awareness Metal
Pin
Badges (Large & Narrow)
Purple Enameled Pin in Gold Shine,
Back with Butterfly Clutch
Color: pms265c
D121001F
Innocence Awareness Metal Pin
Badges (Large & Narrow)
White Enameled Pin in Gold Shine,
Back with Butterfly Clutch
Color: pms white
White Ribbon means innocence, victims of terrorism, violence
against women, peace
D121001G
Anti-Violence Awareness Metal
Pin
Badges (Large & Narrow)
Purple Enameled Pin in Gold Shine,
Back with Butterfly Clutch
Color: pms265c
D121001H
Child-Abuse-Prevention Awareness
Metal Pin Badges (Large & Narrow)
Blue Enameled Pin in Gold Shine,
Back with Butterfly Clutch
Color: pms293c
Blue Ribbon is a symbol of drunk driving, child abuse, the
victims of hurricane Katrina, etc
D121001I
Environmental Awareness Metal
Pin Badges(Large & Narrow)
Green Enameled Pin in Gold Shine,
Back with Butterfly Clutch
Color: pms355c
Green Ribbons Present Environmental Awareness for Earth
Day
16
Enameled Country Flag Pins (Wavy) Process: iron stamped + soft enamel + gold plating
D172001
United States
D172027
South Africa
D172030
Greece
D172031
Netherland
D172033
France
D172034
Spain
D172039
Italy
D172041
Switzerland
D172044E
Union Jack
D172045
Denmark
D172049
Germany
D172052
Mexico
D172054
Argentina
D172055
Brazil
D172056
Chile
D172061
Australia
D172064
New Zealand
D172081
Japan
D172082
South Korea
D172213
Algeria
D172225
Cote d’Ivoire
D172233
Ghana
D172234
Nigeria
D172237
Cameroon
D172351
Portugal
D172381S
Serbia
D172386
Slovenia
D172421
Slovakia
D172504
Honduras
D172595
Paraguay
D172598
Uruguay
D172850
Korea Republic
17
Enameled Country Flag Pins (Rectangular) Process: iron stamped + soft enamel + gold plating
D173001
United States
D173027
South Africa
D173030
Greece
D173031 Netherland
D173033
France
D173034
Spain
D173039
Italy
D173041
Switzerland
D173044E
Union Jack
D173045
Denmark
D173049
Germany
D173052
Mexico
D173054
Argentina
D173055
Brazil
D173056
Chile
D173061
Australia
D173064
New Zealand
D173081
Japan
D173082
South Korea
D173213
Algeria
D173225
Cote d’Ivoire
D173233
Ghana
D173234
Nigeria
D173237
Cameroon
D173351
Portugal
D173381S
Serbia
D173386
Slovenia
D173421
Slovakia
D173504
Honduras
D173595
Paraguay
D173598
Uruguay
D173850
Korea Republic
18
Plastic Boxes
Item # Model # Size (mm) For packing of Velvet insert
D126000 28x28x20 1pc of pin Blue
D126001 NP-01 33x33x25 1pc of pin Black, Red
D126002 NP-02 40x40x18 1pc of pin Black, Red
D126003A NP-03 80x30x26 1pc of pin Black, Red
D126003B NP-03 80x30x26 1pc of pin Black, Red
D126004 NP-04 120x120x18 6~12pcs of pins Black, Red
D126005 NP-05 30x30x22 1pc of pin Black, Red
D126006 NP-06 70x65x30 1pc of tie clip+1 pair of
cufflinks
Black
D126007 NP-07 60x45x26 1 pair of cufflinks Black
D126008 NP-08 100x75x18 3~6pcs of pins Black, Red
D126009 NP-09 55x45x15 1~4pcs of pins Black, Red
D126010 NP-10 68x58x13 1~4pcs of pins Black, Red
D126011 NP-11 150x100x25 4~10pcs of pins Red
D126012 NP-12 160x160x20 9~15pcs of pins Black, Red
D126013 NP-13 125x53x18 1pcs of keychain Black, Red
D126014 NP-14 75x38x27 1pc of tie clip Black, Red, Blue
D126015 120x89x16 1pc of medal Black
D126016 47x47x8 1pc of coin (Ø38-40mm)
D126017 57x57x9 1pc of coin (Ø44mm)
D126018 57x57x9 1pc of coin
(Ø50mm)
19
D126000 D126001 D126002 D126003A
D126003B D126004 D126005 D126006
D126007 D126008 D126009 D126010
D126011 D126012 D126013 D126014
D126015 D126016 D126017 D126018
20
Tin Button Badges Event tin button badge made by our in-house molding tools, accepts your custom logo/
design
Item # Name Packing
D118001 20mm Tin Button Badges 5000 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 11 kgs
D118002 25mm Tin Button Badges 4000 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 13 kgs
D118003 30mm Tin Button Badges 3000 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 13 kgs
D118004 32mm Tin Button Badges 2400 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 13 kgs
D118005 35mm Tin Button Badges 2400 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 13 kgs
D118006 38mm Tin Button Badges 2000 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 13 kgs
D118007 40mm Tin Button Badges 1500 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 11.5 kgs
D118008 44mm Tin Button Badges 1200 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 11.8 kgs
D118009 50mm Tin Button Badges 1200 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 13 kgs
D118010 55mm Tin Button Badges 800 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 11.4 kgs
D118011 70mm Tin Button Badges 600 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 12.4 kgs
D118012 75mm Tin Button Badges 500 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 12.5 kgs
D118013 25x25mm Tin Button Badges 4000 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 13 kgs
D118014 39x39mm Tin Button Badges 1500 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 13 kgs
D118015 50x50mm Tin Button Badges 800 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 11.4 kgs
D118016 53x53mm Tin Button Badges 800 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 13 kgs
D118017 30x55mm Tin Button Badges 1500 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 13 kgs
D118018 40x55mm Tin Button Badges 1000 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 12 kgs
D118019 43x72mm Tin Button Badges 800 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 13 kgs
21
Plastic Button Bdges Event tin button badge made by our in-house plastic injection mold, accepts your custom
logo/ design
Item # Name Packing
D119001 25mm Plastic Button Badges 4000 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 13 kgs
D119002 32mm Plastic Button Badges 3000 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 13 kgs
D119003 38mm Plastic Button Badges 2500pcs in carton of 34(W) * 30(H) * 33(D) cm with gross weight of 13.5 kgs
D119004 45mm Plastic Button Badges 2000 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 15 kgs
D119005 56mm Plastic Button Badges 1200 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 13 kgs
D119006 64mm Plastic Button Badges 1000 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 13 kgs
D119007 76mm Plastic Button Badges 700 pcs in a carton of 34(W) * 30(H) * 33(D) cm with gross weight of 13.6 kgs
22
PCB Blinking Pins
D111001 D111002 D111004
D111005 D111007 D111008 D111009
D111010 D111012 D111013
D111014 D111015
D111016 D111017
Logos/ Designs shown for reference only. No re-production without authorization of the owners.
23
Metal Blinking Pins
D112001 D112002
D112003 D112004
D112005
Logos/ Designs shown for reference only. No re-production without authorization of the owners.
24
Suggested models of tie clips
25
Tie Clips
D116001B D116001D D116001E
D116001G D116002B D116002C
D116003 D116004A D116004B
D116004C D116004G D116006A
D116006D D116006E D116007A
26
D116007B D116008 D116010A
D116010D D116011A D116011B
D116011C D116013A D116013B
D116014A D116014C D116015C
D116016 D116017 D116019
Logos/ Designs shown for reference only. No re-production without authorization of the owners.
27
Cufflinks
D115001 D115002A D115002B
D115003 D115004B D115005B D115006
D115007 D115008 D115009 D115012
D115013
Logos/ Designs shown for reference only. No re-production without authorization of the owners.
28
Rubber Magnets (Printed on Aluminum) Process: 0.3mm aluminum + black rubber magnet foil
Logos/ Designs shown for reference only. No re-production without authorization of the owners.
29
Rubber Magnets (Printed on PP) Process: 0.15mm PP + black rubber magnet foil
Logos/ Designs shown for reference only. No re-production without authorization of the owners.
30