NEW proaucts clearance is 6 inches; optional risers increase clearance to either 8 or 12 inches. The chains on the Edge Carry conveyor are adjusted easily with a hex driver to accommodate various widths of parts to be cured, from RECYCLING AQUEOUS CLEANER Arbortech Corp., manufacturer of customized membrane systems for wastewater treatment, now offers the Washer Washer, its line of standard systems designed for recycling water- based cleaners. With maintenance staffs being reduced, keeping a wash- ing operation in use for longer periods has become essential-no time or per- sonnel to dump and recharge a clean- ing tank. Recycling makes more sense today than at any time in our history. Consideting changes due to cutbacks, increased cleanliness demands, and more abundant or more difficult con- taminants due to new sources for the parts or metals themselves, it can be tough to maintain parts' quality with limited resources. Arbortech offers a brochure detail- ing nine key benefits that can be derived from recycling parts' cleaning solutions. A basic list of evaluative questions is provided to preliminarily establish viability of the process in any given application. A complete ques- tionnaire is also availablethat, upon its return, is used by the company to pre- pare a calculator that will enable the end user to determine monthly savings with a Washer Washer in use. The effects of contamination on cleaning are discussed and photographs of typi- cal systems are included. To request the brochure, or for more information, visit www.washerwasher.com. Circle 401 on reader service card SPRAY CABINET Viking Blast & Wash Systems is now offering its new RW 120-72C Rotary Waterblaster Spray Cabinet. This extra-large-capacity washer offers a work envelope of 72 inches in height with a 120-inch diameter worktable that can sup- port up to 15,000 pounds. The RW 120-72C comes standard with two, 15-HP seal-less pump rated at 610 gallons per minute at 60 psi. Pump 56 I metalfinishing I October 2009 horsepower upgrades are available as well as high-pressure options for additional cleaning power. This washer features a double-wrap door for simplified loading with an overhead crane or fork lift. The RW 120-72C is ruggedly constructed with 1/4 -inch reinforced plate steel. The double door system is also construct- ed with %-inch reinforced plate steel and utilizes a bearing hinge system for easy opening and closing. For more information, call (800) 835-1096, e- mail [email protected], or visit www.vikingcorporation.com. Circle 402 on reader service card CONVEYOR CURING SYSTEM The new Edge Carry Series of con- veyors from DYMAX Corp. is designed for efficient handling of a variety of parts, such as printed cir- cuit boards, that are populated on two sides, or palletized components. This conveyor series provides seam- less transition from upstream assem- bly/dispense systems with in-line transport capability. Top surface cur- ing of UV and/or visible-light-sensi- tive adhesives, inks, and coatings is accomplished with up to four Dymax UVCS 5000 lamps, one 1200/2000 EC lamp, or up to two, 6- inch microwave lamps. These lamps offer complete shielding from UV light and consistent cure times. Configuration options allow flexi- bility when defining intensity requirements to keep operating costs to a minimum. Standard height 2.75 inches up to 18 inches. For more information, call (877) 396-2988, e- mail [email protected], or visit www.dymax.com. Circle 403 on reader service card METAL REMOVAL LUBRICANTS Henkel Corp. has introduced two new water-soluble Multan metal removal lubricants formulated to generate minimal foam and be used continuously for years with minimal biological degradation. Users of tra- ditional metal cutting fluids often experience problems with foam buildup and bacteria growth. Excessivefoam causes lubricant over- flow and waste while bacteria growth generates odors, degrades the lubri- cant, and can cause operator health and safety concerns. Both Multan B 236 and B 414 are semi-synthetic metal removal fluids for machining and grinding ferrous and non-fer- rous alloys. These lubricants are designed for applications where soft www.metatfinishing.com
Transcript
NEWproauctsclearance is 6 inches; optional risersincrease clearance to either 8 or 12inches. The chains on the Edge Carryconveyor are adjusted easily with ahex driver to accommodate variouswidths of parts to be cured, from
RECYCLING AQUEOUS CLEANERArbortech Corp., manufacturer ofcustomized membrane systems forwastewater treatment, now offers theWasher Washer, its line of standardsystems designed for recycling waterbased cleaners. With maintenancestaffs being reduced, keeping a washing operation in use for longer periodshas become essential-no time or personnel to dump and recharge a cleaning tank. Recycling makes more sensetoday than at any time in our history.Consideting changes due to cutbacks,increased cleanliness demands, andmore abundant or more difficult contaminants due to new sources for theparts or metals themselves, it can betough to maintain parts' quality withlimited resources.
Arbortech offers a brochure detailing nine key benefits that can bederived from recycling parts' cleaningsolutions. A basic list of evaluativequestions is provided to preliminarilyestablish viability of the process in anygiven application. A complete questionnaire is also available that, upon itsreturn, is used by the company to prepare a calculator that will enable theend user to determine monthly savingswith a Washer Washer in use. Theeffects of contamination on cleaningare discussed and photographs oftypical systems are included. To requestthe brochure, or for more information,visit www.washerwasher.com.
Circle 401 on reader service card
SPRAY CABINETViking Blast & Wash Systems isnow offering its new RW 120-72CRotary Waterblaster SprayCabinet. This extra-large-capacitywasher offers a work envelope of 72inches in height with a 120-inchdiameter worktable that can support up to 15,000 pounds. The RW120-72C comes standard with two,15-HP seal-less pump rated at 610gallons per minute at 60 psi. Pump
56 I metalfinishing I October 2009
horsepower upgrades are availableas well as high-pressure options foradditional cleaning power.
This washer features a double-wrapdoor for simplified loading with anoverhead crane or fork lift. The RW
120-72C is ruggedly constructed with1/4 -inch reinforced plate steel. Thedouble door system is also constructed with %-inch reinforced plate steeland utilizes a bearing hinge system foreasy opening and closing. For moreinformation, call (800) 835-1096, email [email protected], orvisit www.vikingcorporation.com.
Circle 402 on reader service card
CONVEYOR CURING SYSTEMThe new Edge Carry Series of conveyors from DYMAX Corp. isdesigned for efficient handling of avariety of parts, such as printed circuit boards, that are populated ontwo sides, or palletized components.This conveyor series provides seamless transition from upstream assembly/dispense systems with in-linetransport capability. Top surface curing of UV and/or visible-light-sensitive adhesives, inks, and coatings isaccomplished with up to fourDymax UVCS 5000 lamps, one1200/2000 EC lamp, or up to two, 6inch microwave lamps. These lampsoffer complete shielding from UVlight and consistent cure times.
Configuration options allow flexibility when defining intensityrequirements to keep operating coststo a minimum. Standard height
2.75 inches up to 18 inches. For moreinformation, call (877) 396-2988, email [email protected], or visitwww.dymax.com.
Circle 403 on reader service card
METAL REMOVAL LUBRICANTSHenkel Corp. has introduced twonew water-soluble Multan metalremoval lubricants formulated togenerate minimal foam and be usedcontinuously for years with minimalbiological degradation. Users of traditional metal cutting fluids oftenexperience problems with foambuildup and bacteria growth.Excessivefoam causes lubricant overflow and waste while bacteria growthgenerates odors, degrades the lubricant, and can cause operator healthand safety concerns. Both Multan B236 and B 414 are semi-syntheticmetal removal fluids for machiningand grinding ferrous and non-ferrous alloys. These lubricants aredesigned for applications where soft
www.metatfinishing.com
NEWproaucts
water or process requirements makefoam control difficult. These fluidsprovide superb wetting characteristics to maintain equipment, toolingand part cleanliness.
Multan B Series lubricants reduceoverall processing costs, maximizetool life and productivity, while eliminating smut and buildup on machineinteriors, tools, and finished parts.These products leave behind a verylight film residue after machining orgrinding is complete to protect partsduring storage. For more information, call (248) 583-9300, [email protected],or visit www.henkelna.comjmultan.
Circle 404 on reader service card
CENTRIFUGAL PUMPSGriswold PumpCo., manufacturer ofANSI centrifugal pumps, now offersits 811 Series ANSI line of pumpswith enhanced power frames that not
only increase performance andlongevity but also simplify maintenance. The improved strength andrigidity of the 811 Series power framesare an estimated 33% stronger thancompetitive models , making them better equipped to withstand severe conditions found in paint and coatingprocesses and transfer applications.
The 811 Series offers a full range ofpump sizes, as well as options andupgrades that can be tailored to meetvirtually any fluid-processing application with flow rates up to, andincluding, 908 m3jh (4,000 gpm).Among the 811's features are the
lNWW.metalfinishing.com
availability of both standard andlow-flow models, heavy-duty powerframes, fully open impellers with rearadjustment capability, and a widevariety of mechanical-seal options.811 Series pumps are available withductile iron, 316 stainless steel,CD4MCu and Alloy 20 liquid paths,which make them viable in temperatures as high as 260°C (500°F). All811 Series pumps undergo extensivehydro testing before being deliveredto the customer. For more information, visit www.griswoldpump.com.
Circle 405 on reader service card
COLOR CARDSPPG Industries has published colorcards for its Duranar ULTRA-Cooland Superl II ULTRA-Cool coatings.Duranar ULTRA-Cool coatings formetal roofs feature a polyvinylidenefluoride (PVDF) coating system thatoffers higher solar reflectivity thancompeting products. The color carddepicts 24Iight-, medium-, and darkcolored coatings, including sixpearlescent tones. Many are registered with Energy Star and the CoolRoof Rating Council (CRRC).
Superl II ULTRA-Cool siliconepolyester coatings are formulatedwith a proprietary resin technologyand innovative formulation processthat provide better chalk, fade, corrosion, and moisture resistance thanavailable with other silicone-polyester coatings. The new color cardshows 20 color options, from jetblack to polar white, that are available in a full range of gloss options..Download color cards at the PPGwebsite or order hard copies atwww.requestppg.com.
Circle 406 on reader service card
ORIFICE FLOWMETERABB Instrumentation has cut thecost of installing orifice-plateflowmeters by up to half with thelaunch of its OriMaster compact orifice DP flowmeter. The latest inABB's new FlowMaster range, theOriMaster is a one-piece flowmeterthat comes fully factory configuredand pressure tested, solving many ofthe problems associated with sizing,selection, installation, and operation
of conventional orifice plate installations. The OriMaster combines allthe major components needed for anorifice plate installa tion in oneassembly and is suitable for clean liquids , gases and steam applications inline sizes from 1 to 8 inches (DN25to DN200) and at pressures up to1450 psi (100 bar).
ABB offers two orifice bores foreach pipe size, simplifying theselection process. The flowmetercomes in rwo versions: one for volumetric readings (OriMasrer V)and the other for mass flow(OriMaster M). OriMaster V suitsgeneral purpose volume measurement, featuring a stainless steel
transmitter housing and meterbody. It provides an optional flowrate and total display as well as ananalog output. OriMaster M provides measurements directly inmass or corrected volume units. Ituses ABB's 267CS multivariabletransmitter to measure differentialpressure, temperature, and pressure, and provides an optional display and analog output. For moreinformation, call (800) 829-6001 orvisit www.abb .comjinstrumentation.
Circle 407 on reader service card
DISPENSING VALVETridak's new Model 455 dispensingvalve is a pneumatically operated,two-way pinch valve. It featuresmicrometer control over the flow
