+ All Categories
Home > Documents > MetalTec · TENG-S75-1001 Revision 7 In areas where inorganic zinc or organic zinc is used as a...

MetalTec · TENG-S75-1001 Revision 7 In areas where inorganic zinc or organic zinc is used as a...

Date post: 20-Jul-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
7
Transcript
Page 1: MetalTec · TENG-S75-1001 Revision 7 In areas where inorganic zinc or organic zinc is used as a primer, the surface shall be pressure cleaned with potable water at 1500 to 2500psi
Page 2: MetalTec · TENG-S75-1001 Revision 7 In areas where inorganic zinc or organic zinc is used as a primer, the surface shall be pressure cleaned with potable water at 1500 to 2500psi
Page 3: MetalTec · TENG-S75-1001 Revision 7 In areas where inorganic zinc or organic zinc is used as a primer, the surface shall be pressure cleaned with potable water at 1500 to 2500psi
Page 4: MetalTec · TENG-S75-1001 Revision 7 In areas where inorganic zinc or organic zinc is used as a primer, the surface shall be pressure cleaned with potable water at 1500 to 2500psi
Page 5: MetalTec · TENG-S75-1001 Revision 7 In areas where inorganic zinc or organic zinc is used as a primer, the surface shall be pressure cleaned with potable water at 1500 to 2500psi
Page 6: MetalTec · TENG-S75-1001 Revision 7 In areas where inorganic zinc or organic zinc is used as a primer, the surface shall be pressure cleaned with potable water at 1500 to 2500psi
Page 7: MetalTec · TENG-S75-1001 Revision 7 In areas where inorganic zinc or organic zinc is used as a primer, the surface shall be pressure cleaned with potable water at 1500 to 2500psi

Recommended