Metalux

22RDILED

2 ' X 2 ' T R O F F E R L E D M O D U L E

Spec i f i ca t ion Grade Trof fer

PS519177EN4-19-2018

The Ovation LED Series is a complete family of recessed direct/indirect luminaires dedicated to the latest solid state lighting and drives technology for optimal performance and energy efficiency. All components are located above the ceiling plane for a clean architectural appearance in the finished space. Carefully balanced design elements combine to provide an efficient and exciting alternative to traditional general lighting. Ovation LED is an excellent choice for commercial office spaces, schools, hospitals, or retail merchandising areas.

DESCRIPTIONCatalog # Type

Date

Project

Comments

Prepared by

Safe and convenient means of disconnecting power

23-11/16"[602mm]

3-1/4"[88mm]

23-3/4"[603mm]

2-1/2"[64mm]

1-1/2"[38mm]

WiringAccess Plate7/8" [22mm]

K.O. (2)

MOUNTING DATA

GGrid/Lay-inStandard

TSlot Grid

FDrywall FrameKit

Ceiling TrimType** TypeExposed Grid GConcealed T G or TSlot Grid G or TFlange ***

CEILING COMPATIBILITY

C E R T I F I C A T I O N D A T AcULus - 1598

Damp Location Listed

IC Rated

LM79/LM80 Compliant

DesignLights Consortium® Qualified

NOM Compliant

*See Drywall Frame Kit Accessory in

Ordering Information Section

SPECIFICATION FEATURES

ConstructionNominal 6" deep housing is die formed of code gauge, prime cold rolled steel. Heavy gauge end plates are securely attached with screws for strength and rigidity and the elimination of gaps. Four auxiliary fixture end suspension points are provided.

ControlsMetalux LED luminaires come standard with 0-10V dimming drivers (1% standard).

Options compatible with Eaton’s Connected Lighting Systems:• LumaWatt Pro sensor• Fifth Light DALI driverOther options include step-dimming and 3rd party drivers. Refer to the Connected Lighting options page and ordering information for more details.

ElectricalLong-Life LED system coupled with electrical driver to deliver optimal performance. LED’s available in 3000K, 3500K, 4000K or 5000K with a minimum CRI of 80. Projected life is 60,000 hours at 80% lumen output. cULus listed. Electronic drivers are available for 120-277V and 347V applications.

Emergency Battery Pack OptionOptional 120v-277v integral emergency battery pack is available in 7-watts or 14-watts to meet critical life-safety lighting requirements. The 90-minute batteries provide constant power to the LED system, ensuring code-compliance. The patented EZ Key prevents accidental discharge of the battery during construction. See ordering information for details.

FinishDurable cold rolled steel with multistage, iron phosphate pretreatment and white enamel finish to ensure maximum bonding and rust inhibition.

ReflectorsIndirect reflector has high reflectance baked matte white enamel finish for luminous uniformity. Positively retained direct lamp shield is constructed of heavy gauge perforated steel with high reflectance painted after fabrication finish and milky white overlay diffuser for visual comfort. All reflectors are precision formed in a computer-controlled operation.

ComplianceModules are UL recognized components and indoor luminaires are cULus listed for 25ºC ambient environments, and LED modules comply with IESNA LM-79 and LM-80 standards. DesignLights Consortium® Qualified and classified for DLC Standard, refer to www.designlights.org for details.

WarrantyFive year warranty.

23-3/4"[603 mm]

6"[152mm]

Specifications and dimensions subject to change without notice.

Eaton 1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.eaton.com/lighting

22RDI LED 2' X 2'

PS519177EN4-19-2018

PHOTOMETRICS

22RDI-30-UNV-L840-CD1-U

Electronic Driver

Linear LED 4000K

Spacing criterion: (II) 1.21 x mounting height, (⊥) 1.32 x mounting height

Lumens: 3037.2

Input Watts: 29.9W

Efficacy: 101.6 lm/W

Test Report: 22RDI-LD5-30-UNV-L840-CD1-U.IES

051015202530354045505560657075808590

C a n d l e p owe r

Angle Along II 45° Across ⊥

1049 1049 10491040 1045 10491023 1031 1038994 1007 1020957 976 997907 936 967850 890 930785 836 889714 776 836636 713 781556 643 716466 570 633373 485 541281 393 439198 301 346128 209 26471 131 16826 52 680 0 0

C o e f f i c i e n t s o f U t i l i z a t i o n

Effective floor cavity reflectance 20%

rc 80% 70% 50% 30% 10% 0%rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

RCR0123456789

10

119 119 119 119 116 116 116 116 111 111 111 106 106 106 102 102 102 100109 104 99 96 106 102 98 94 97 94 91 93 91 88 90 88 86 8399 90 83 78 96 88 82 77 85 79 75 82 77 73 78 75 71 6990 79 71 64 87 78 70 64 75 68 63 72 66 61 69 64 60 5882 70 61 54 80 69 60 54 66 59 53 64 58 52 62 56 52 5076 62 53 47 73 61 53 46 59 52 46 57 51 45 55 50 45 4370 56 47 41 68 55 47 41 53 46 40 52 45 40 50 44 39 3765 51 42 36 63 50 42 36 49 41 35 47 40 35 46 40 35 3360 46 38 32 59 46 38 32 44 37 32 43 36 31 42 36 31 2956 43 34 29 55 42 34 29 41 34 28 40 33 28 39 33 28 2653 39 31 26 51 39 31 26 38 31 26 37 30 26 36 30 26 24

Z o n a l L u m e n S u m m a r y

Zone Lumens % Fixture0-30

0-40

0-60

0-90

0-180

815 26.8

1338 44.1

2386 78.5

3037 100.0

3037 100.0

L u m i n a n c e Da t a

Anglein Deg

Average0-Degcd/sm

Average45-Degcd/sm

Average90-Degcd/sm

4555657585

2420 2713 29722186 2674 29701789 2502 27951331 2173 2745803 1606 2100

263

0˚ 30˚

40˚

50˚

70˚

90˚

20˚

80˚

60˚526

788

1051

10˚

22RDI-40-UNV-L835-CD1-U

Electronic Driver

Linear LED 3500K

Spacing criterion: (II) 1.21 x mounting height, (⊥) 1.32 x mounting height

Lumens: 4075.6

Input Watts: 41.8W

Efficacy: 97.5 lm/W

Test Report: 22RDI-40-UNV- L835-CD1-U.IES

051015202530354045505560657075808590

C a n d l e p owe r

Angle Along II 45° Across ⊥

1406 1406 14061395 1401 14061371 1381 13911332 1350 13681282 1308 13371215 1256 12961142 1194 12511053 1120 1191957 1040 1123851 955 1050748 862 957627 765 845505 653 726380 528 591265 406 469174 280 35696 175 22435 71 900 0 0

C o e f f i c i e n t s o f U t i l i z a t i o n

Effective floor cavity reflectance 20%

rc 80% 70% 50% 30% 10% 0%rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

RCR0123456789

10

119 119 119 119 116 116 116 116 111 111 111 106 106 106 102 102 102 100109 104 99 96 106 101 98 94 97 94 91 93 91 88 90 88 86 8399 90 83 78 96 88 82 77 85 79 75 82 77 73 78 75 71 6990 79 71 64 87 78 70 64 75 68 63 72 66 61 69 64 60 5882 70 61 54 80 69 60 54 66 59 53 64 58 52 62 56 52 5075 62 53 47 73 61 53 46 59 52 46 57 51 45 55 50 45 4370 56 47 41 68 55 47 40 53 46 40 52 45 40 50 44 39 3765 51 42 36 63 50 42 36 49 41 35 47 40 35 46 40 35 3360 46 38 32 58 46 38 32 44 37 32 43 36 31 42 36 31 2956 43 34 29 55 42 34 29 41 34 28 40 33 28 39 33 28 2653 39 31 26 51 39 31 26 38 31 26 37 30 26 36 30 26 24

Z o n a l L u m e n S u m m a r y

Zone Lumens % Fixture0-30

0-40

0-60

0-90

0-180

1093 26.8

1795 44.0

3200 78.5

4076 100.0

4076 100.0

L u m i n a n c e Da t a

Anglein Deg

Average0-Degcd/sm

Average45-Degcd/sm

Average90-Degcd/sm

4555657585

3239 3634 39962942 3589 39642420 3362 37631809 2911 37011081 2192 2779

352

0˚ 30˚

40˚

50˚

70˚

90˚

20˚

80˚

60˚705

1057

1409

10˚

Ambient Temperature

TM-21 LumenMaintenance

(60,000 hours)

TheoreticalL70

(Hours)

25°C > 90% > 60,000

LUMEN MAINTENANCE ENERGY AND PERFORMANCE DATA BY CATALOG NUMBER

Stock orMTO*

Catalog Logic(Curved)

DeliveredLumens

WattsEfficacy(LPW)

MTO 22RDI-20-UNV-L830-CD1-U 1945 19.9 97

MTO 22RDI-20-UNV-L835-CD1-U 2026 19.9 101

MTO 22RDI-20-UNV-L840-CD1-U 2026 19.9 101

MTO 22RDI-20-UNV-L850-CD1-U 2107 19.9 105

MTO 22RDI-30-UNV-L830-CD1-U 2911 30.1 96

MTO 22RDI-30-UNV-L835-CD1-U 3032 30.1 100

MTO 22RDI-30-UNV-L840-CD1-U 3032 30.1 100

MTO 22RDI-30-UNV-L850-CD1-U 3153 30.1 104

MTO 22RDI-40-UNV-L830-CD1-U 3913 41.8 93

MTO 22RDI-40-UNV-L835-CD1-U 4076 41.8 97

MTO 22RDI-40-UNV-L840-CD1-U 4076 41.8 97

MTO 22RDI-40-UNV-L850-CD1-U 4239 41.8 101

*Made to order (MTO) requires a typical three week lead time.

Specifications and dimensions subject to change without notice.

Eaton 1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.eaton.com/lighting

22RDI LED 2' X 2'

PS519177EN4-19-2018

Catalog No. Wt.

22RDI 19 lbs.

SHIPPING DATA

ORDERING INFORMATION

A C C E S S O R I E SEQ-CLIP-U=T-BAR Safety Earthquake Clips (1)

DF-22-W=2' x 2' Drywall Frame KitSK-22-WT=2' x 2' Tall Surface Mount KitDF10P-C =Decorator Dimmer, 0-10VSF10P- =Decorator Slide Dimmer, 0-10V

SAMPLE NUMBER: 22RDI -30 -UNV-L840 -CD1-U

ShieldingBlank=Metal Perforated Lens (standard)

Voltage (2)

347V=347 Volt (4)

UNV=UniversalVoltage 120-277

Number of Drivers1=1 Driver

PackagingU=Unit PackPALC=JobPack, in carton

NOTES: (1)An EQ Grid Clip is recommended for all 9/16" ceiling systems. Four required per fixture. (2)Products also available in non-US voltages and frequencies for international markets. (3)With integral test switch/indica-tor. For approximate delivered lumens multiply the lumens per watt of the desired fixture by the wattage of the emergency battery pack (100 lm/W x 7=700 lumens). IES-format photometry for luminaire under emergency operation available. (4) 347V versions are not available with emergency options. SD, 5LTD, not available. (5) Used to transfer fixture to secondary power source for life-safety operation. When used with a dimming fixture, two devices are required to ensure control is disabled while operating under emergency power. (6) Must specify 120V or 277V for wiring of ETS/GTD components. (7) Air version is vented but does not meet air handling requirements; a 3% reduction in delivered lumens is experienced with this option. (8) Chicago rated and air vented cannot be ordered in combination with each other. (9)DesignLights Consortium® Qualified and classified for DLC Standard, refer to www.designlights.org for details.

OptionsEmergencyEL7W=7-watt, 120V-277V emergency battery pack installed (3)

EL14W=14-watt 120V-277V emergency battery pack installed (3)

GTD2=Bodine Generator Transfer Device (5), (6)

ETS2=IOTA Emergency Transfer Switch (5), (6)

CCTL830=3000KL835=3500KL840=4000K

FlexA3/8-4/18GDIM=3/8" Flex with 0-10V Dimming LeadsMultiple other configurations available. See below for details.

L850=5000K

Driver TypeCD=0-10V Dimming Driver (1%-100% Dimming)SD=Step Dimming Driver (50% or 100% Dimming)5LTD=Fifth Light DALI Driver (10%-100% Dimming) (B)

Series (9)

22RDI=2x2 Ovation Series(Recessed Direct/Indirect)

Lumen Output20=2000 Lumens30=3000 Lumens40=4000 Lumens

Ovation

Air[Blank]=StandardA=Air (Vented) (7), (8)

RatingBlank=StandardATW-SW4=ChicagoRated (8)

Integrated Sensing SystemsLWTPD1=LumaWatt Pro Wireless Tile-mount Sensor (A)

Integrated Sensing and Control System OptionsNOTES: Integrated options must be used in conjunction with the associated system and may not be compatible with other options or accessories. Please refer to the following: (A) Consult LumaWatt Pro system pages for additional details and compatibility. (B) Consult Fifth Light system pages for additional details and compatibility.

A C C E S S O R I E SEQ-CLIP-U=T-BAR Safety Earthquake Clips (1)

DF-22-W=2' x 2' Drywall Frame KitSK-22-WT=2' x 2' Tall Surface Mount KitDF10P-C =Decorator Dimmer, 0-10VSF10P- =Decorator Slide Dimmer, 0-10V

SAMPLE NUMBER: 22RDI -30 -UNV-L840 -CD1-U

ShieldingBlank=Metal Perforated Lens (standard)

Voltage (2)

347V=347 Volt (4)

UNV=UniversalVoltage 120-277

Number of Drivers1=1 Driver

PackagingU=Unit PackPALC=JobPack, in carton

NOTES: (1)An EQ Grid Clip is recommended for all 9/16" ceiling systems. Four required per fixture. (2)Products also available in non-US voltages and frequencies for international markets. (3)With integral test switch/indica-tor. For approximate delivered lumens multiply the lumens per watt of the desired fixture by the wattage of the emergency battery pack (100 lm/W x 7=700 lumens). IES-format photometry for luminaire under emergency operation available. (4) 347V versions are not available with emergency options. SD, 5LTD, not available. (5) Used to transfer fixture to secondary power source for life-safety operation. When used with a dimming fixture, two devices are required to ensure control is disabled while operating under emergency power. (6) Must specify 120V or 277V for wiring of ETS/GTD components. (7) Air version is vented but does not meet air handling requirements; a 3% reduction in delivered lumens is experienced with this option. (8) Chicago rated and air vented cannot be ordered in combination with each other. (9)DesignLights Consortium® Qualified and classified for DLC Standard, refer to www.designlights.org for details.

OptionsEmergencyEL7W=7-watt, 120V-277V emergency battery pack installed (3)

EL14W=14-watt 120V-277V emergency battery pack installed (3)

GTD2=Bodine Generator Transfer Device (5), (6)

ETS2=IOTA Emergency Transfer Switch (5), (6)

CCTL830=3000KL835=3500KL840=4000K

FlexA3/8-4/18GDIM=3/8" Flex with 0-10V Dimming LeadsMultiple other configurations available. See below for details.

L850=5000K

Driver TypeCD=0-10V Dimming Driver (1%-100% Dimming)SD=Step Dimming Driver (50% or 100% Dimming)5LTD=Fifth Light DALI Driver (10%-100% Dimming) (B)

Series (9)

22RDI=2x2 Ovation Series(Recessed Direct/Indirect)

Lumen Output20=2000 Lumens30=3000 Lumens40=4000 Lumens

Ovation

Air[Blank]=StandardA=Air (Vented) (7), (8)

RatingBlank=StandardATW-SW4=ChicagoRated (8)

Integrated Sensing SystemsLWTPD1=LumaWatt Pro Wireless Tile-mount Sensor (A)

Integrated Sensing and Control System OptionsNOTES: Integrated options must be used in conjunction with the associated system and may not be compatible with other options or accessories. Please refer to the following: (A) Consult LumaWatt Pro system pages for additional details and compatibility. (B) Consult Fifth Light system pages for additional details and compatibility.

Flexible Metal Conduit OptionsFlex options available for 0-10V dimming control, DALI dimming control, emergency and night light functions. 72-inch factory-installed and pre-wired to driver, fitted to luminaire housing access plate with 90° enclosed FMC connector. Not all options may be combined and installation ratings vary by type.A3/8-4/18GDIM series notes: Factory installed dimming option 3/8” flexible metal conduit with 2-#18 power and ground wires and 2-#18 UL-listed jacketed 0-10V +/- control wires. Meets UL 66, 83, 1479, 1569, 1581, 2556. NEC® 250.118, 300.22(C), 392, 396, 330, 501, 502, 503, 530, 504, 505, 518, 520, 530, 645, 72; Federal Specification A-A-59544 (formerly J-C-30B); all applicable OSHA and HUD Requirements. UL Classified 1-, 2-, and 3-hour through penetration with applicable fire stop product (not included). May be surface mounted, fished and/or embedded in plaster. Cable tray and approved raceway rated, install per NEC®; Environmental Air-Handling Space Installation per NEC® 300.22(C ).

Specifications & dimensions subject to change without notice. Consult your Eaton Representative for availability and ordering information.