Metalworking Machine Tools Supplier & Equipment …...10-1085 10-1090 10-1095 10-1100 10-1105...

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.

ITI Carbide Cutting Tools1

PRODUCT INDEX

SERIES 10 Standard boring tool SERIES 18 ALTIN coated Max-Bore

APPLICATION :BORING ALL TYPES OF MATERIALS

page 6-7 page 8

APPLICATION :BORING TOUGH TO MACHINEMATERIALS. STAINLESS ETC.

SERIES 04 Multi-Reach boring tools

APPLICATION :DEEP HOLE BORING

page 9

SPECIALIZING IN UNIQUE AND HARD TO FIND CUTTING TOOLS

page 14-15

SERIES 14 Triangle Insert Bars

APPLICATION :ID BORING

SERIES 12 Diamond Insert Bars

APPLICATION :FOR BORING ALUMINUM page 18-19

SERIES 16 Diamond Insert Bars

APPLICATION :FOR BORING STEEL page 16-17

page 11

APPLICATION :DRILL, BORE & TURNWITH THE SAME TOOL

SERIES 54 Double edge bore tools

page 10APPLICATION :BORING ALL TYPES OF MATERIALS

SERIES 42 Quick Change boring tool

page 12

APPLICATION :BORE & THREADWITH THE SAME TOOL

SERIES 50 Bore & Thread tools

page 12

APPLICATION :BORE & GROOVEWITH THE SAME TOOL

SERIES 48 Bore & Groove tools

page 11

SERIES 59 Drill & bore tools

APPLICATION :DRILL & BOREWITH THE SAME TOOLpage 11

SERIES 55 Bore & Back chamfer tools

APPLICATION :BORE & BACK CHAMFERWITH THE SAME TOOL

page 43APPLICATION : PROFILING

SERIES 56 R.H. offset profile tools

page 42

SERIES 56 Profile tools

APPLICATION :I.D. PROFILINGpage 31

SERIES 40 Replacment Heads

APPLICATION :HEADS & SCREWS

INTERNAL TOOL INC.


PRODUCT INDEX

ITI CARBIDE: SPECIALLY BLENDED FOR OPTIMUM PERFORMANCE

SERIES 42 Quick Change groove tool

page 26

APPLICATION :GROOVING ALL TYPES OF MATERIALS

page 36APPLICATION :BORE A THREAD RELIEF

SERIES 46 Thread relief tools

APPLICATION :LEFT HAND OFFSET PROFILING

SERIES 56 L.H.offset profile tools SERIES 56 Fine point profile tools

APPLICATION :FINE POINT PROFILINGpage 43 page 43page 37

SERIES 42 Quick Change profile tool

APPLICATION :PROFILING ALL TYPES OF MATERIALS

SERIES 24 Full radius groove tools

APPLICATION :GROOVING - PROFILING

SERIES 22 ALTIN coated Max Groove

APPLICATION :GROOVING TOUGH TO MACHINEMATERIALS. STAINLESS ETC.

page 27

page 24-25

page 30

SERIES 26 Insert Grooving Tools

APPLICATION :INSERT GROOVE TOOL

page 28APPLICATION :SPECIAL GROOVE TOOLS

Groove Tools Made to Order

page 22

SERIES 06 Multi-Reach groove tools

APPLICATION :DEEP HOLE GROOVINGpage 42

APPLICATION :DEEP HOLE PROFILING

SERIES 09 Multi-Reach Profile Tools

SERIES 27 O-Ring groove tools

APPLICATION :GROOVING FOR O'RINGS page 22

SERIES 73 Face Grooving Tools

APPLICATION :FACE GROOVING page 33

page 42

SERIES 56 Reverse Profile tools

page 20-21

SERIES 20 Standard grooving tools

APPLICATION :GROOVING ALL TYPES OF MATL

APPLICATION :I.D. REVERSE PROFILING

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.

ITI Carbide Cutting Tools

3

PRODUCT INDEX

page 50-51

page 41

page 41

page 41

QUALITY TOOLING MADE IN THE USA

SERIES 62 Engraving tools

APPLICATION :ENGRAVING, CHAMFERING, C'SINKING

SERIES 63 countersinks

APPLICATION :COUNTERSINKING

SERIES 61 Runner cutters

APPLICATION :MACHINING RUNNERS IN MOLDS

SERIES 60 Die Sinkers

APPLICATION :TAPERED BALL MILLING

page 45

SERIES 58 Spade Drills

APPLICATION :DRILLING HARD MATERIALS

APPLICATION :THREAD & GROOVEWITH THE SAME TOOL

SERIES 52 Thread & groove tools

page 22

page 38-40page 34

SERIES 31 Left Hand threading tools

APPLICATION :LEFT HAND I.D. THREADING

APPLICATION :ID INSERT THREADING

SERIES 36 Insert Threading Tools

page 34

SERIES 30 Threading tools

APPLICATION :STANDARD I.D. THREADING

SERIES 66 CNC Backspot facers

APPLICATION :CNC BACK SPOT FACING page 52

page 36

SERIES 08 Multi-Reach threading tools

APPLICATION :DEEP HOLE THREADING page 36

APPLICATION :THREADING ALL TYPES OF MATERIALS

SERIES 42 Quick Change thread tool

page 35APPLICATION :ACME I.D. THREADING

SERIES 32 & 34 Acme threading tools

SERIES 69 TAPERED ENDMILLS

page 46APPLICATION :TAPERED MILLING

SERIES 39 external o'ring groove tools

APPLICATION :EXTERNAL GROOVE page 29

INTERNAL TOOL INC.


page 58

page 52

page 53

page 66-69

PRODUCT INDEX

ITI CARBIDE: FOR EXTRA LONG TOOL LIFE

SERIES 68 Corner Rounders

APPLICATION :ROUNDING CORNERS

SERIES 67 Reverse Corner Rounders

APPLICATION :ROUNDING BACK ORINSIDE CORNERS

SERIES 65 Edge Breakers

APPLICATION :EDGE BREAKING / CHAMFERING

SERIES 78 Carbide HeadKey Cutters

APPLICATION :SLOTTING & GROOVING page 61

SERIES 78 Carbide Key Cutterswith Carbide Head Steel Shankfor Soft Material

APPLICATION :SLOTTING & GROOVINGSOFT MATERIAL ALUMINUMBRASS PLASTIC ETC

page 48

SERIES 21 & 41 micro endmills

APPLICATION :MILLING SMALL PARTS page 54-57

SERIES 64 Chamfer Mills

APPLICATION :MILLING ANGLES& CHAMFERSpage 49

SERIES 41 Endmills in speciallengths and sizes

APPLICATION :MILLING SPECIAL PARTS

page 80

page 75

SERIES 80 Full Radius Key Cutters

APPLICATION :FULL RADIUS SLOTS

SERIES 81 Anglers

APPLICATION :MACHINING LARGE ANGLES

page 44

SERIES 49 Drill-Mills

APPLICATION :DRILL & MILL WITHTHE SAME TOOL

SERIES 85 N/C C'bores

APPLICATION :C'BORING page 93

SERIES 72 double chamfer cutters

APPLICATION :chamfering both sides of a plate page 53

SERIES 93 carbide reamers

page 92APPLICATION : reaming

APPLICATION :CENTER DRILLING page 45

SERIES 71 Center Drills

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


SERIES 88 Thread Mills

APPLICATION :ID & OD THREADINGpage 73

SERIES 92 Double Angle Cutters

APPLICATION : ANGLES & CHAMFERS

page 80

page 78

page 82-85

page 86

page 88-89

page 90

page 29

5

PRODUCT INDEX

RE-DEFINING THE INDUSTRY STANDARD

SERIES 86 Dovetail Cutters

APPLICATION :DOVETAIL SLOTS & CHAMFERS

Dovetail Cutters Made to Order

APPLICATION :SPECIAL DOVETAILS

INTERNAL TOOL

SERIES 84 Dbl Concave Cutters

APPLICATION :RADIUS WORK

APPLICATION :RADIUS WORK

SERIES 82 Concave Rad Key CuttersSERIES 90 Single Angle Cutters

APPLICATION :ANGLE CUTS & CHAMFERS

page 74

SERIES 78 3/8 Shank Key Cutters

APPLICATION :FOR LIVE TOOLING page 79

Carbide Key Cutters Made to Order

APPLICATION :SPECIAL CUTTERS

page 82APPLICATION :FACE GROOVE DOVETAILS

SERIES 51 O-ring Dovetail Cutters

SERIES 39 external groove andchamfer tools

APPLICATION :EXTERNAL GROOVEAND CHAMFER

page 62-63 page 60

SERIES 76 Carbide Key Cuttersfor Soft Material

APPLICATION :SLOTTING & GROOVINGSOFT MATERIAL ALUMINUMBRASS PLASTIC ETC

SERIES 76 Solid CarbideKey Cutters

APPLICATION :SLOTTING & GROOVING

SERIES 89 multiple thread threadmills

page 91

APPLICATION :MILL MULTIPLE THREADS IN ONE PASS

page 45

SERIES 75 Spotting Drills

APPLICATION :CENTER DRILLING-C'SINK

INTERNAL TOOL INC.


MINIMUM BORE

MAXIMUM

DEPTH

1/8 X 2"O.A.L.

1/8 X 2"O.A.L.

B-050-150B-050-200B-050-300B-050-400B-060-150B-060-200B-060-300B-060-400B-060-500B-080-150B-080-200B-080-300B-080-400B-080-500B-080-600B-100-150B-100-200B-100-300B-100-400B-100-500B-100-600B-100-700B-110-150B-110-200B-110-300B-110-400B-110-500B-110-600B-110-700B-120-250B-120-350B-120-500B-120-600B-120-700B-120-800

ORDER

EDP#

1/8 X 2"O.A.L.

TOOL

IDENTIFICATION

1/4 X 2-1/2"O.A.L.

.050.140

.180

.200

.060

.080

.100

.110

.120

.160

1/8 X 2"O.A.L.

1/8 X 2"O.A.L.

3/16 X 2-1/2"O.A.L.

3/16 X 2-1/2"O.A.L.

3/16 X 2-1/2"O.A.L.

1/4 X 2-1/2"O.A.L.

TAPERED NECK AND FILLET RADIUS PROVIDE MAXIMUM RIGIDITY

ALL SHANKS HAVE LOCKDOWN FLATS FOR FASTER SETUPS

MINIMUM BORE +.000 -.005

MAXIMUM DEPTH OF CUT +.050 -.000

SERIES 10 STANDARDSOLID CARBIDE BORING TOOLS

BORING TOOLS

STANDARD BORING TOOLS

APPLICATION : STANDARDGENERAL PURPOSE BORING TOOLFOR BORING ALL TYPES OF MATERIALS

made from

4°

1.5°

10-100010-100510-101010-101510-102010-102510-103010-103510-104010-104510-105010-105510-106010-106510-107010-107510-108010-108510-109010-109510-110010-110510-111010-111510-112010-112510-113010-113510-114010-114510-115010-115510-116010-116510-1170

.250

.400

.500

.600

.700

.750

.800

.250

.400

.500

.600

.750

.9001.000.350.500.600.750.9001.0001.100.400.500.600.700.800.9001.0001.1001.2001.300

SHANK &OVERALL LENGTH

.150

.200

.300

.400

.150

.200

.300

.400

.500

.150

.200

.300

.400

.500

.600

.150

.200

.300

.400

.500

.600

.700

.150

.200

.300

.400

.500

.600

.700

.250

.350

.500

.600

.700

.800

10-117510-118010-118510-119010-119510-120010-120510-121010-121510-122010-122510-123010-123510-124010-124510-125010-125510-126010-126510-127010-127510-128010-128510-129010-129510-130010-130510-131010-131510-132010-1325

B-140-250B-140-400B-140-500B-140-600B-140-700B-140-750B-140-800B-160-250B-160-400B-160-500B-160-600B-160-750B-160-900B-160-1000B-180-350B-180-500B-180-600B-180-750B-180-900B-180-1000B-180-1100B-200-400B-200-500B-200-600B-200-700B-200-800B-200-900B-200-1000B-200-1100B-200-1200B-200-1300

SHANK DIAMETER

MINIMUM BORE

MAXIMUM

DEPTH

ORDER

EDP#

TOOL

IDENTIFICATIONSHANK &OVERALL LENGTH

ALL TOOLS ON THIS PAGE ARE AVAILABLE IN LEFT HANDADD -LH TO EDP NUMBER WHEN ORDERING Example : 10-1630-LH

ITI CARBIDE: FOR THE HIGHEST PRODUCTION

ITI CARBIDE BO

RIN

G T

OO

LS

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


3/8

X

2-1/2"

O.A.L.

1/2 X 6"O.A.L.

1/2 X 3"O.A.L.

10-133010-133510-134010-134510-135010-135510-136010-136510-137010-137510-138010-138510-139010-139510-140010-140510-141010-141510-142010-142510-143010-143510-144010-144510-145010-145510-146010-146510-147010-147510-148010-148510-149010-149510-150010-150510-1510

3/8

X

2-1/2"

O.A.L.

.320

3/8 X4" O.A.L.

.320

.290

.230

5/16

X

2-1/2

O.A.L.

.400

.500

.600

.700

.800

.9001.0001.1501.2001.2501.4001.5001.600.500.600.750.9001.0001.1001.2501.3501.5001.6001.750.500.600.750.9001.0001.1001.2501.5001.6001.8002.0002.5003.000

TOOL

IDENTIFICATIONMINIMUM BORE

MAXIMUM DEPTH

ORDER EDP#

SHANK &

3/8 X4" O.A.L.

1/2 X4" O.A.L.

OVERALL LENGTH

B-230-400B-230-500B-230-600B-230-700B-230-800B-230-900B-230-1000B-230-1150B-230-1200B-230-1250B-230-1400B-230-1500B-230-1600B-290-500B-290-600B-290-750B-290-900B-290-1000B-290-1100B-290-1250B-290-1350B-290-1500B-290-1600B-290-1750B-320-500B-320-600B-320-750B-320-900B-320-1000B-320-1100B-320-1250B-320-1500B-320-1600B-320-1800B-320-2000B-320-2500B-320-3000

SERIES 10 STANDARDSOLID CARBIDE BORING TOOLSCONTINUED

B-360-500B-360-600B-360-750B-360-900B-360-1000B-360-1150B-360-1250B-360-1500B-360-1600B-360-1800B-360-2000B-360-2500B-360-3000B-490-750B-490-1000B-490-1250B-490-1500B-490-2000B-490-2500B-490-2600B-490-3000B-490-3500B-490-4000B-490-4500

10-151510-152010-152510-153010-153510-154010-154510-155010-155510-156010-156510-157010-157510-158010-158510-159010-159510-160010-160510-161010-161510-162010-162510-1630

3/8

X

2-1/2"

O.A.L.

TOOL

IDENTIFICATIONMINIMUM BORE

MAXIMUM DEPTH

ORDER EDP#


.500

.600

.750

.9001.0001.1501.2501.5001.6001.8002.0002.5003.000.7501.0001.2501.5002.0002.5002.6003.0003.5004.0004.500

.490

.490

.360

.360

.490

MAXIMUM DEPTH OF CUT +.050 -.000


TAPERED NECK AND FILLET RADIUS PROVIDE MAXIMUM RIGIDITY

1.5°

4°

APPLICATION : STANDARDGENERAL PURPOSE BORING TOOLFOR BORING ALL TYPES OF MATERIALS

STANDARD BORING TOOLS

BORING TOOLS made from ITI CARBIDE


SHANK DIAMETER

PROUDLY MADE IN THE USA 7

BO

RIN

G T

OO

LS

ALL TOOLS ON THIS PAGE ARE AVAILABLE IN LEFT HANDADD -LH TO EDP NUMBER WHEN ORDERING Example : 10-1630-LH

INTERNAL TOOL INC.


ALTIN COATED GROUND WITH HELICAL RAKEELLIPTICAL NECK FOR GREATER STRENGTH

SERIES 18 MAX BORESOLID CARBIDEMAXIMUM STRENGTHBORING TOOLS


MAXIMUM DEPTH +.050 -.000


MAX-BORE BORING TOOLS

2°

3°

ALTIN COATED MAX-BORE BORING TOOLS

Max-Bore is the Ultimate in boring tools. Featuring an elliptical neck forgreater strength. A special helical flute for maximum shearing action witha better finish, and a ALTIN coating for a longer life. Max-Bore outper-forms and outlasts our competitors boring tools two to one.

APPLICATION : BORING TOUGH MATERIALS STAINLESS,TITANIUM, 4140, 4340, D2, NICKEL, MONEL, INCONEL ETC.

CORNER RADIUS

ITI CARBIDEmade from

SHANK DIAMETER

BO

RIN

G T

OO

LS

ON THE WEB: WWW.INTERNALTOOL.COM

MB-050-200MB-050-300MB-050-400MB-060-200MB-060-300MB-060-400MB-060-500MB-080-200MB-080-300MB-080-400MB-080-500MB-080-600MB-090-400MB-090-500MB-090-600MB-100-300MB-100-400MB-100-500MB-100-600MB-100-700MB-110-300MB-110-400MB-110-500MB-110-600MB-110-700MB-120-400MB-120-500MB-120-600MB-120-700MB-120-800MB-140-400MB-140-500MB-140-600MB-140-700MB-140-800MB-140-900MB-140-1000MB-140-1250MB-160-500MB-160-600MB-160-800MB-160-1000MB-160-1250

MB-180-400MB-180-500MB-180-600MB-180-800MB-180-1000MB-180-1250MB-180-1500MB-200-400MB-200-500MB-200-800MB-200-1000MB-200-1250MB-200-1500MB-200-1750MB-240-500MB-240-800MB-240-1000MB-240-1250MB-240-1500MB-290-750MB-290-1000MB-290-1250MB-290-1500MB-290-1750MB-310-500MB-310-750MB-310-1000MB-310-1250MB-310-1500MB-310-1750MB-360-500MB-360-750MB-360-1000MB-360-1250MB-360-1500MB-490-750MB-490-1000MB-490-1250MB-490-1500

MINIMUM BORE

MAXIMUM

DEPTHORDER EDP#

TOOL

IDENTIFICATION


CORNER

RADIUS

18-100018-100518-101018-101518-102018-102518-103018-103518-104018-104518-105018-105518-106018-106518-107018-107518-108018-108518-109018-109518-110018-110518-111018-111518-112018-112518-113018-113518-114018-114518-115018-115518-116018-116518-117018-117518-118018-118518-119018-119518-120018-120518-1210

18-121218-121518-122018-122518-123018-123518-124018-124218-124518-125018-125518-126018-126518-127018-127518-128018-128518-129018-129518-130018-130518-131018-131518-132018-132218-132518-133018-133518-134018-134518-135018-135518-136018-136518-137018-137518-138018-138518-1390

.050

.060

.080

.090

.100

.110

.120

.140

.200

.300

.400

.200

.300

.400

.500

.200

.300

.400

.500

.600

.400

.500

.600

.300

.400

.500

.600

.700

.300

.400

.500

.600

.700

.400

.500

.600

.700

.800

.400

.500

.600

.700

.800

.9001.0001.250.500.600.8001.0001.250

.400

.500

.600

.8001.0001.2501.500.400.500.8001.0001.2501.5001.750.500.8001.0001.2501.500.7501.0001.2501.5001.750.500.7501.0001.2501.5001.750.500.7501.0001.2501.500.750.7501.0001.250

MINIMUM BORE

MAXIMUM

DEPTH

ORDER EDP#

TOOL

IDENTIFICATIONSHANK &OVERALL LENGTH

CORNER

RADIUS

.180

.200

.240

.290

.310

.360

.490

3/16 X 2-1/2"O.A.L.

1/4 X 2-1/2"O.A.L.

1/4 X 2-1/2"O.A.L.

5/16 X 2-1/2"O.A.L.

5/16 X 2-1/2"O.A.L.

3/8 X 2-1/2"O.A.L.

1/2 X 2-1/2"O.A.L.

1/8 X 2"O.A.L.

1/8 X 2"O.A.L.

1/8 X 2"O.A.L.

1/8 X 2"O.A.L.

1/8 X 2"O.A.L.

1/8 X 2"O.A.L.

1/8 X 2"O.A.L.

3/16 X 2-1/2"O.A.L.

.007

.007

.007

.007

.007

.007

.007

.007

.007

.007

.007

.007

.007

.007

.015

.015

8

Series 18 is what used to be ourseries 11 now expandedwith more sizes

.160 3/16 X 2-1/2"O.A.L.

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


MULTI-REACH BORING TOOLS

APPLICATION : MULTI-REACH BORING NO LONGER LIMITED BY NECK LENGTH. ONE TOOL REPLACES A SERIES OF OTHERS.

04-1095

04-1100

04-1110

04-1120

04-1130

04-1140

ORDER EDP#

MINIMUM BORE

SHANKDIAMETER

3/16"

1/4"

5/16"

3/8"

1/2"

5/8"

.220

.280

.350

.420

.560

.700

SHANK LENGTH

4"

4"

4"

6"

6"

6"

SERIES 04

SOLID CARBIDE SHANKS PROVIDE MAXIMUM RIDGIDITY.

ITI CARBIDE

CORNER RADIUS

.005

.007

.007

.010

.010

.015

MINIMUM BORE +.000 -.005 CORNER

RADIUS SHANK DIAMETER

ALTIN COATEDORDER EDP#

04-1095-C

04-1100-C

04-1110-C

04-1120-C

04-1130-C

04-1140-C

made from

91-100091-101091-102091-103091-104091-105091-106091-107091-108091-109091-110091-111091-112091-113091-1140

ORDER EDP#

MINIMUM BORE

PLASTIC CUTTING BORING TOOLS

MAXIMUM

DEPTHSHANK &OVERALL LENGTH

.250

.500

.800

.500

.7501.250.500.7501.250.500.7501.250.7501.0001.500

1/8 X 2"O.A.L.

3/16 X 2-1/2"O.A.L.

1/4 X 2-1/2"O.A.L.

3/8 X 2-1/2"O.A.L.

1/2 X 3"O.A.L.

APPLICATION : CLEARANCE AND RELIEF ANGELS FOR CUTTING PLASTIC

MINIMUM BORE +.000 -.005 MAXIMUM

DEPTH +.030 -.000

10°

5°

SERIES 91 ITI CARBIDEmade from

BO

RIN

G T

OO

LS

SERIES 91 PLASTIC BORECARBIDE BORING TOOLS MADE FOR CUTTING PLASTICS

SERIES 04 LONG REACH CARBIDE BORING TOOLS

9

108-1000108-1050108-1100108-1150108-1200108-1250108-1300108-1350108-1400108-1450108-1500108-1550108-1600108-1650108-1700

CBN EDP#

MINIMUM BORE

CBN AND PCD TIPPED BORING TOOLS

MAXIMUM

DEPTHSHANK &OVERALL LENGTH

.250

.500

.800

.500

.7501.250.500.7501.250.500.7501.250.7501.0001.500

1/8 X 2"O.A.L.

3/16 X 2-1/2"O.A.L.

1/4 X 2-1/2"O.A.L.

3/8 X 2-1/2"O.A.L.

1/2 X 3"O.A.L.


MAXIMUM DEPTH +.030 -.000

3°

SERIES 108

PCD EDP#

108-5000108-5050108-5100108-5150108-5200108-5250108-5300108-5350108-5400108-5450108-5500108-5550108-5600108-5650108-5700

APPLICATION : CBN for hard ferrous materials 45 rc and harder. PCD for abrasive non ferrous materials.

1.5°

.004radius

.120

.180

.240

.370

.490

.120

.180

.240

.370

.490

INTERNAL TOOL INC.


R AD IU S

4°

7°

MIN BORESHANK DIAMETER

MAX DEPTH

42-097042-097542-098042-098542-099042-099542-100042-100542-101042-101542-102042-102542-103042-103542-104042-104542-105042-105542-106042-106542-107042-107542-108042-108542-109042-109542-110042-1105

.080

.180

.140

.120

.100

.060

.050

MINIMUM

BORE

MAX

DEPTHORDER EDP#

.160

.050

.080

.100

.150

.200

.300

.200

.300

.200

.300

.400

.500

.200

.300

.400

.500

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

QUICK CHANGE

BORING TOOLS ITI CARBIDE

ALTINCOATED EDP#

made from

.040

.030

.020 42-0970-C42-0975-C42-0980-C42-0985-C42-0990-C42-0995-C42-1000-C42-1005-C42-1010-C42-1015-C42-1020-C42-1025-C42-1030-C42-1035-C42-1040-C42-1045-C42-1050-C42-1055-C42-1060-C42-1065-C42-1070-C42-1075-C42-1080-C42-1085-C42-1090-C42-1095-C42-1100-C42-1105-C

MAX DEPTH

MINIMUM BORE

SHARP TIPNO RADIUS

ALL THE DETAIL AND QUALITY FROM OUR STANDARD LINE LESS EXPENSIVE QUICK CHANGE STYLE NEW FEATURE - AXIAL RAKE FOR FASTER FREER CUTTING QUICK CHANGE - REPLACE TOOLS QUICKLY AND ACCURATELY

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

.800

.9001.0001.100.200.300.400.500.600.700.800.9001.0001.100

42-1105-C42-1110-C42-1115-C42-1120-C42-1125-C42-1130-C42-1135-C42-1140-C42-1145-C42-1150-C42-1155-C42-1160-C42-1165-C42-1170-C42-1175-C42-1180-C42-1185-C42-1190-C42-1195-C42-1200-C42-1205-C42-1210-C42-1215-C42-1220-C42-1225-C42-1230-C

42-111042-111542-112042-112542-113042-113542-114042-114542-115042-115542-116042-116542-117042-117542-118042-118542-119042-119542-120042-120542-121042-121542-122042-122542-123042-1235

SERIES 19 ALUMINUM BORESOLID CARBIDE FOR ALUMINUM

MINIMUM

BORE

MAX

DEPTHORDER EDP#

ALTINCOATED EDP#

BO

RIN

G T

OO

LS

19-120019-125019-129019-130019-135019-139019-140019-145019-149019-150019-155019-159019-160019-165019-1690

ORDER EDP#

MINIMUM BORE

ALUMINUM CUTTING BORING TOOLS

MAXIMUM

DEPTH


.250

.500

.800

.500

.7501.250.500.7501.250.500.7501.250.7501.0001.500

1/8 X 2"O.A.L.

3/16 X 2-1/2"O.A.L.

1/4 X 2-1/2"O.A.L.

3/8 X 2-1/2"O.A.L.

1/2 X 3"O.A.L.

APPLICATION : CLEARANCE AND RELIEF ANGELS FOR CUTTING ALUMINUM


SERIES 42 QUICK CHANGE BORESOLID CARBIDEHIGH PRODUCTIONBORING TOOL TIPS

HOLDERS ARE AVAILABLE WITH3/8, 1/2, 5/8, & 3/4 SHANK SIZES.STANDARD STYLE3/8" SHANK EDP# 42-90001/2" SHANK EDP# 42-90055/8" SHANK EDP# 42-90103/4" SHANK EDP# 42-901522 MM SHANK EDP# 42-9020

COOLANT HOLE STYLE3/8" SHANK EDP #42-95001/2" SHANK EDP #42-95055/8" SHANK EDP #42-95103/4" SHANK EDP #42-951522 MM SHANK EDP #42-9520

EXTRA SCREW EDP# 42-8888

ZIRCONIUM NITRIDE COATED

CORNER RADIUS

.007

.007

.007

.015

.015

10 INTERNAL TOOL THE LEADER IN INNOVATION

.120

.180

.240

.370

.490

QUICK CHANGE

HOLDERS

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


BO

RIN

G T

OO

LS

BORE & BACK CHAMFER TOOLS

APPLICATION : BORING RELIEVING PROFILING BORE YOUR HOLE THEN MOVEOVER & REMOVE THE BURR ONTHE BACKSIDE OF THE HOLE

3/8 X 2-1/2 O.A.L.

5/16 X 2-1/2 O.A.L.

1/4 X 2-1/2 O.A.L.

1/2 X 3" O.A.L.

3/16 X 2-1/2 O.A.L.

ORDER

EDP#

MIN

HOLEOFFSETWIDTH

MAX

DEPTH

.050 .0451/8

3/16 .050

.0601/4

.0805/16

.1203/8

.1301/2

1/8 X 2" O.A.L.

ALL SHANKS HAVE LOCKDOWN FLATSFOR FASTER SETUPS

MAXDEPTH

WIDTH

MINHOLE

OFFSET

45°

5°

4°

55-110055-110555-111055-111555-112055-112555-113055-113555-114055-114555-115055-1155

.300

.500

.400

.800

.5001.000.7501.250.7501.2501.0001.500

.060

.080

.080

.100

.110

RADIUS

.015

.015

.015

.020

.020

.030

RADIUS

ALTINCOATED EDP#

55-1100-C55-1105-C55-1110-C55-1115-C55-1120-C55-1125-C55-1130-C55-1135-C55-1140-C55-1145-C55-1150-C55-1155-C


SERIES 55 BORE & BACK CHAMFERSOLID CARBIDE

ORDER

EDP#

MIN

HOLE

MAX

DEPTH

DB-240-500DB-240-750DB-240-1000DB-310-500DB-310-750DB-310-1000DB-360-500DB-360-750DB-360-1000DB-490-500DB-490-750DB-490-1000

.500

.7501.000.500.7501.000.500.7501.000.500.7501.000

1/4

5/16

3/8

SERIES 54 DOUBLE EDGE SOLID CARBIDE

1/4 X 2-1/2 O.A.L.

5/16 X 2-1/2 O.A.L.

3/8 X 2-1/2 O.A.L.

MAXDEPTH

MIN.HOLE

54-110054-110554-111054-111554-112054-112554-113054-113554-114054-114554-115054-1155

1/2 1/2 X 3" O.A.L.

APPLICATION : DRILL, BORE, ANDTURN ALL WITH THE SAME TOOL.

TURN OD

BORE ID

ITI CARBIDE


TOOL

IDENTIFICATIONmade from

DOUBLE EDGE BORING TOOLS

ORDER

EDP#

MIN

HOLE

MAX

DEPTH

DBO-250-500DBO-250-750DBO-250-1000DBO-312-500DBO-312-750DBO-312-1000DBO-375-500DBO-375-750DBO-375-1000DBO-500-500DBO-500-750DBO-500-1000

.500

.7501.000.500.7501.000.500.7501.000.500.7501.000

1/4

5/16

3/8

1/4 X 2-1/2 O.A.L.

5/16 X 2-1/2 O.A.L.

3/8 X 2-1/2 O.A.L.

MAXDEPTH

MINHOLE

59-120059-120559-121059-121559-122059-122559-123059-123559-124059-124559-125059-1255

1/2 1/2 X 3" O.A.L.

SERIES 59 DRILL & BORE SOLID CARBIDEAPPLICATION : DRILL, BORE, AND TURN ALL WITH THE SAME TOOL. FEATURING A DRILL POINT FOR FASTER, STRAIGHTER CUTTING

15° POINT

ITI CARBIDE

2°


TOOL

IDENTIFICATIONmade from

DRILL & BORE TOOLS

11THE MOST UNIQUE LINE OF CUTTING TOOLS AVAILABLE




INTERNAL TOOL INC.


ORDER

EDP# TOOL

IDENTIFICATION

MIN

HOLEOFFSETTHREAD

WIDTH

MAX

DEPTH

CM-240-500CM-240-750CM-240-1000CM-310-500CM-310-750CM-310-1000CM-360-500CM-360-750CM-360-1000

50-110050-110550-111050-111550-112050-112550-113050-113550-1140

.0501/4

.0605/16

1/4 X 2-1/2 O.A.L.

.0803/8

COMBINATION BORE & THREAD

5/16 X 2-1/2 O.A.L.

3/8 X 2-1/2 O.A.L.

COMBINATION TOOLS

SERIES 50

.090

.065

.055

TOOL

IDENTIFICATION

ORDER

EDP#

MIN

HOLE OFFSETGROOVE

WIDTH

MAX

DEPTH

.094 .0501/4

.125 .0605/16

.156 .0803/8

COMBINATION BORE & GROOVE

SERIES 48

1/4 X 2-1/2 O.A.L.

5/16 X 2-1/2 O.A.L.

3/8 X 2-1/2 O.A.L.

MAXDEPTH

MINHOLE

OFFSET

GROOVE WIDTH

MINHOLE

OFFSET

60°

ALL TOOLS ON THIS PAGE ARE RIGHT HAND CUTTING

APPLICATION : BORING & THREADING WITH THE SAME TOOL.

APPLICATION : BORING & GROOVING WITH THE SAME TOOL.

MAX

DEPTH

ITI CARBIDE

ITI CARBIDE

TURN OD

THREAD OD

THREAD ID

BORE ID

GROOVE ID

BORE ID

GROOVE OD

TURN OD

GROOVE WIDTH CAN BE MODIFIED NO EXTRA CHARGE

made from

made from BO

RIN

G T

OO

LS

.500

.7501.000.500.7501.000.500.7501.000

.500

.7501.000.500.7501.000.500.7501.000

48-110048-110548-111048-111548-112048-112548-113048-113548-1140

BG-240-500BG-240-750BG-240-1000BG-310-500BG-310-750BG-310-1000BG-360-500BG-360-750BG-360-1000

BORING / GROOVING TOOL HOLDER

Tool holder for allset screw flat type shanks

APPLICATION :A HOLDER THAT WILL HOLD OUR STANDARD SET SCREW FLAT STYLE 1/8" THRU 1/2" DIAMETER SHANK TOOLS.

Series 98 BUSHINGS

SERIES 98

ORDER

EDP#

BUSHING

SIZE

1/83/161/45/163/81/2

98-245098-245598-246098-246598-247098-2475

98-240098-2405

ORDER

EDP#

SHANK

STYLE

3/4" ROUND1" SQUARE

Series 98 HOLDERS

MAKING QUALITY TOOLS SINCE 195712



CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.

ITI Carbide Cutting Tools 13

5/16" MINIMUM BORE

INSERTS FOR 5/16" BARS - 5/32" INSERT I.C.

HEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP# INSERTTHICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK

CARBIDEWITH COOLANT HOLE

T11-31 BHF-0203S

SHANKLENGTH

6"

INSERT I.C.

1/4 5/32 99-1100 1/163"

14-1042 14-1045

SHANK DIA.

SCREW EDP #

SHANK STYLES

14-1030 14-103314-1039

T1200A CERMET

CARBIDE GRADE

TIPRADIUS

SUMITOMO NUMBER

AC5104 TIN COATEDT1200A CERMET

T2000Z

AC325 TIN COATED

ORDER EDP#

3/8" MINIMUM BOREHEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP# INSERT

THICKNESSSCREWNUMBER

CARBIDESHANK

STEELSHANK


T11-37 BHF-0203B

SHANKLENGTH

6"

INSERT I.C.

5/16 3/16 99-1105 3/323"

14-1060 14-1063

SHANK DIA.

SHANK STYLES

14-1048 14-1051 14-105414-1057



CARBIDESHANK

STEELSHANK


T11-43 BHF-0203B

SHANKLENGTH

6"

INSERT I.C.

3/8 3/16 3/32 3"14-1078 14-1081

SHANK DIA.

SHANK STYLES

14-1066 14-1069 14-107214-1075

T12A CERMET

CARBIDE GRADE

TPGT-630.5L

TIPRADIUS

SUMITOMO NUMBER

AC5104 TIN COATEDT12A CERMET

T2000Z

AC5104 TIN COATED

TPGT-630.5L

TPGT-631LFXTPGT-631L

ORDER EDP#

TPGT-630.5L

14-1036

SERIES 14

SERIES 14

INDEXABLE INSERT TRIANGLE 5/32 I.C.

99-1105

TBGT-521LTBGT-520.5LFWTBGT-520.5LFXTBGT-521LTBGT-521LFX

15-110015-111015-112015-113015-1140

.007

.007

.007

.015

.015

.007

.007

.007

.015

.015

15-115015-116015-117015-118015-1190

INDEXABLE INSERT BORING BARSUSING SUMITOMO TRIANGLE INSERTS

INSERTS FOR 3/8" & 7/16" BARS - 3/16" INSERT I.C.


SCREW EDP #

SCREW EDP #

NOTICE: INSERT BORING BARS ARE MADE TO ORDER; PLEASE CALL FOR DELIVERY TIME,

OTHERWISE THE DELIVERY TIME WILL BE QUOTED IN AN ORDER CONFIRMATION

BO

RIN

G T

OO

LS


INTERNAL TOOL INC.




CARBIDESHANK

STEELSHANK


T11-50 BHF0306R

SHANKLENGTH

6"

INSERT I.C.

3/8 1/4 1/8 3"14-1096 14-1099

SHANK DIA.

SHANK STYLES

14-1084 14-1087 14-109014-1093

9/16" MINIMUM BOREHEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP#

SCREWNUMBER

CARBIDESHANK

STEELSHANK


T11-56

SHANKLENGTH

6"

INSERT I.C.

1/2 1/4

3"14-1114 14-1117

SHANK DIA.

14-1102 14-110514-1111


SCREWNUMBER

CARBIDESHANK

STEELSHANK


T11-62

SHANKLENGTH

6"

INSERT I.C.

1/2 1/4 1/8

3"14-1150 14-1153

SHANK DIA.

14-1138 14-1141 14-114414-1147

12"9"

14-113214-1120 14-112314-1129

14-112614-1135

14-1108

9" 14-1156 14-1159 14-116214-117114-1165 14-116812"


SCREWNUMBER

CARBIDESHANK

STEELSHANK


T11-68

SHANKLENGTH

6"

INSERT I.C.

5/8 1/4 1/8

3"14-1186 14-1189

SHANK DIA.

14-1174 14-117714-1183


SCREWNUMBER

CARBIDESHANK

STEELSHANK


T11-75

SHANKLENGTH

6"

INSERT I.C.

5/8 1/4 99-1165

3"14-1222 14-1225

SHANK DIA.

14-1210 14-1213 14-121614-1219

12"9"

14-120414-1192 14-119514-1201

14-119814-1207

14-1180

9" 14-1228 14-1231 14-123414-124314-1237 14-124012"

1/8

INSERTS FOR ABOVE BARS - 1/4" INSERT I.C.

T130Z CERMET

CARBIDE GRADE

TPGG-220.5L

TIPRADIUS

.007

.007

SUMITOMO NUMBER

T2000Z UN-COATED

T130Z CERMET .015

TPGG-220.5L

TPGG-221L

ORDER EDP#

SERIES 14

INSERTTHICKNESS

INSERTTHICKNESS

INSERTTHICKNESS

INSERTTHICKNESS

BHF0308R

BHF0308R

BHF0308R

1/8BHF0308R

99-1165

99-1165

99-1110

T2000Z UN-COATED .015 TPGG-221L INDEXABLE INSERT TRIANGLE 1/4 I.C.

15-120015-121015-122015-1230

INDEXABLE INSERT BORING BARSUSING TRIANGLE INSERTS

THE LEADER IN INNOVATION

SCREW EDP #

SCREW EDP #

SCREW EDP #

99-1165

SCREW EDP #

SCREW EDP #

BO

RIN

G T

OO

LS

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


7/8" MINIMUM BOREHEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP# I NSERT

THICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK


T11-87 BFXO410R

SHANKLENGTH

6"

INSERT I.C.

3/4 3/8 99-1115 3/16

3"14-1258 14-1261

SHANK DIA.

14-1246 14-1249 14-125214-1255

9" 14-1264 14-1267 14-127014-127914-1273 14-127612"

1" MINIMUM BOREHEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP# I NSERT

THICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK


SHANKLENGTH

6"

INSERT I.C.

3/4 3/8 3/16

3"14-1294 14-1297

SHANK DIA.

14-1282 14-128514-1291

1-1/8" MINIMUM BOREHEAD I.D. ORDER EDP#ORDER EDP# I NSERT

THICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK

T11-112

SHANKLENGTH

6"

INSERT I.C.

1" 3/16

3"14-1330

SHANK DIA.

SHANK STYLES

14-1318 14-132114-1327

12"9"

14-131214-1300 14-130314-1309

14-130614-1315

14-1288

9" 14-1336 14-133914-1345 14-134812"


T1200A CERMET

CARBIDE GRADE

TPGG-330.5L

TIPRADIUS

SUMITOMO NUMBER

AC-200 TIN COATED

G10E C-2

EH10Z TIN COATED TPMT-332ENFTPMT-331ENF

ORDER EDP#

TPGG-331L

SERIES 14

T11-100 99-1115 BFXO410R

3/8 BFXO410R

TPGG-330.5LG10E C-2

AC-2500 TIN COATEDEH-10

TPMT-332ENFTPMT-332ENF


15-125015-126015-127015-128015-129015-130015-1310

.007

.007

.015

.015

.031

.031

.031

INDEXABLE INSERT BORING BARSUSING SUMITOMO TRIANGLE INSERTS

ITC CARBIDE: PREMIUM SUBMICRON GRADE CARBIDE

SCREW EDP #

SCREW EDP #

99-1115

SCREW EDP #



BO

RIN

G T

OO

LS

INTERNAL TOOL INC.



INSERT

THICKNESS

CARBIDE SHANK

STEELSHANK


D07-37 S-905/16 1/4 99-1120 3/32

SHANK STYLES

7/16" MINIMUM BORE

D07-43


CARBIDESHANK

STEELSHANK


D07-50 3/8


CARBIDESHANK

STEELSHANK


D07-56

HEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP#

CARBIDESHANK

STEELSHANK


D07-62 1/2 1/4


CARBIDESHANK

STEELSHANK


D07-68 5/8


CARBIDESHANK

STEELSHANK


D07-75 5/8

SERIES 16

S-953/8 1/4 99-1125 3/32

S-951/4 3/32

1/2 S-951/4 3/32

S-95 3/32

1/4 S-95 3/32

S-95 3/321/4

5/8" MINIMUM BORE

TOOL GEOMETRY FOR BORING STEEL & TOUGH MATERIALS

16-166016-1669

3"6"

16-166316-1672

16-166616-1675

HEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP#

CARBIDE SHANK

STEELSHANK


16-167816-1687

16-168416-1693

16-168116-1690

3"6"

16-170216-1711

16-169916-1708

16-169616-1705

INSERT

THICKNESS

3"6"

3"6"9"12"

16-171416-172316-173216-1741

16-172016-172916-173816-1747

16-171716-172616-173516-1744

16-175016-175916-176816-1777

3"6"9"12"

INSERTTHICKNESS

16-175316-176216-177116-1780

16-175616-176516-177416-1783

16-178616-179516-180416-1813

16-178916-179816-180716-1816

16-179216-180116-181016-1819

3"6"9"12"

16-182216-183116-184016-1849

16-182516-183416-184316-1852

16-182816-183716-184616-1855

SHANKLENGTH

C-2C-6TIN COATEDC-2C-6TIN COATED

.015

.015

.015

.032

.032

.032

17-149017-150017-151017-152017-153017-1540

CARBIDE GRADE

TIPRADIUS

ORDER EDP#

INSERTTHICKNESS

SCREWNUMBER

INSERT I.C.

SHANK DIA.

INSERTTHICKNESS

SCREWNUMBER

INSERT I.C.

SHANK DIA.

SCREWNUMBER

INSERT I.C.

SHANK DIA.

SCREWNUMBER

INSERT I.C.

SHANK DIA.

SCREW EDP #

SCREWNUMBER

INSERT I.C.

SHANK DIA.

SCREWNUMBER

INSERT I.C.

SHANK DIA.

SHANKLENGTH

SHANKLENGTH

SHANKLENGTH

SHANKLENGTH

SHANKLENGTH

SHANKLENGTH

3"6"9"12"

INSERTTHICKNESS

SCREWNUMBER

INSERT I.C.

SHANK INSERTTHICKNESS


1/4 I.C.CCGT 21.51

INSERT

INDEXABLE INSERT BORING BARSUSING 7 DEGREE DIAMOND SHAPED INSERTS

UN-MATCHED TOOL VARIETY

SCREW EDP #

SCREW EDP #

99-1125

99-1125

SCREW EDP #

SCREW EDP #

SCREW EDP #

SCREW EDP #

99-1125

99-1125

99-1125

INDEXABLE INSERT DIAMOND 5/16 I.C.

BO

RIN

G T

OO

LS

16

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


1-1/8 MINIMUM BORE

11/16" MINIMUM BORE


CARBIDESHANK

STEELSHANK


D07-87 S-983/4 3/8 5/32


CARBIDESHANK

STEELSHANK


D07-100

HEAD I.D. ORDER EDP#ORDER EDP# INSERTTHICKNESS

CARBIDESHANK

STEELSHANK

D07-112

SHANKLENGTH

1"

S-983/4 3/8 5/32

S-983/8 5/32

CARBIDE GRADE

TIPRADIUS

ORDER EDP#

C-2C-6TIN COATEDC-2C-6TIN COATED

.015

.015

.015

.032

.032

.032

17-155017-156017-157017-158017-159017-1600


CARBIDESHANK

STEELSHANK


D07-68B 5/8 3/8 5/32


SCREWNUMBER

CARBIDESHANK

STEELSHANK


D07-62B S-98-S

INSERT I.C.

1/2 3/8 99-1132 5/32

SHANK DIA.

SCREW EDP #

SERIES 16

3/8 I.C.


CARBIDESHANK

STEELSHANK


D07-75B S-985/8 3/8 5/32

16-185916-186316-186816-1872

16-186016-186516-186916-1874

16-186216-186616-187116-1875

16-187716-188116-188616-1890

16-187816-188316-188716-1892

16-188016-188416-188916-1893

16-189516-189916-190416-1908

16-189816-190216-190716-1911

16-189616-190116-190516-1910

16-185816-186716-187616-1885

16-186116-187016-187916-1888

16-189416-190316-191216-1921

16-186416-187316-188216-1891

16-190016-190916-191816-1927

16-189716-190616-191516-1924

16-193316-194216-195116-1960

16-193016-193916-194816-1957

SHANKLENGTH

3"6"9"12"

3"6"9"12"

3"6"9"12"

3"6"9"12"

SHANKLENGTH

SHANKLENGTH

3"6"9"12"

SHANKLENGTH

SHANKLENGTH

3"6"9"12"

SCREWNUMBER

INSERT I.C.

SHANK DIA.

SCREWNUMBER

INSERT I.C.

SHANK DIA.

SCREWNUMBER

INSERT I.C.

SHANK DIA.

SCREWNUMBER

INSERT I.C.

SHANK DIA.

SCREWNUMBER

INSERT I.C.

SHANK DIA.

S-98-S

5/8" MINIMUM BORE

3/4" MINIMUM BORE

7/8" MINIMUM BORE

1" MINIMUM BORE

TOOL GEOMETRY FOR BORING STEEL & TOUGHER APPLICATIONS

INDEXABLE INSERT CCMT 32.51 3/8" I.C.


ITI CARBIDE: HIGH TRANSVERSE RUPTURE STRENGTH

SCREW EDP #

SCREW EDP #

99-1132

SCREW EDP #

SCREW EDP #

99-1132

99-1132

99-1132

SCREW EDP #

99-1132


BO

RIN

G T

OO

LS

17

INTERNAL TOOL INC.


SERIES 12


INSERTTHICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK


D11-37 S-90

SHANKLENGTH

INSERT I.C.

5/16 1/4 99-1120 3/323"6" 12-1672 12-1675

SHANK DIA.

SCREW EDP #

SHANK STYLES

12-1660 12-1663 12-166612-1669



CARBIDESHANK

STEELSHANK


D11-43

SHANKLENGTH

INSERT I.C.

12-1690 12-1693

SHANK DIA.

12-1678 12-1681 12-168412-1687



CARBIDESHANK

STEELSHANK


D11-50

SHANKLENGTH

INSERT I.C.

3/8 12-1708 12-1711

SHANK DIA.

12-1696 12-1699 12-170212-1705


INSERTTHICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK


D11-56

SHANKLENGTH

6"

INSERT I.C.

3"12-1726 12-1729

SHANK DIA.

12-1714 12-171712-1723


SCREWNUMBER

CARBIDESHANK

STEELSHANK


D11-62

SHANKLENGTH

6"

INSERT I.C.

1/2 1/4

3"12-1762 12-1765

SHANK DIA.

12-1750 12-1753 12-175612-1759

12"9"

12-174412-1732 12-173512-1741

12-173812-1747

12-1720

9" 12-1768 12-1771 12-177412-178312-1777 12-178012"


THICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK


D11-68

SHANKLENGTH

6"

INSERT I.C.

5/8

3"12-1798 12-1801

SHANK DIA.

12-1786 12-178912-1795


THICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK


D11-75

SHANKLENGTH

6"

INSERT I.C.

5/8

3"12-1834 12-1837

SHANK DIA.

12-1822 12-1825 12-182812-1831

12"9"

12-181612-1804 12-180712-1813

12-181012-1819

12-1792

9" 12-1840 12-1843 12-184612-185512-1849 12-185212"

S-953/8 1/4 99-1125 3/32

S-951/4 3/32

1/2 S-951/4 3/32

S-95 3/32

1/4 S-95 3/32

S-95 3/321/4

5/8" MINIMUM BORE


C-6

CARBIDE GRADE

TIPRADIUS

.032

.032

.032

TIN COATED

C-2 .015.015

17-1430

ORDER EDP#

17-1440

17-1470

17-145017-1460

TIN COATED

C-2C-6

.015

17-1480

INDEXABLE INSERT CPGT 21.51 1/4" I.C.

3"6"

3"6"

TOOL GEOMETRY FOR BORING ALUMINUM & SOFT MATERIALS

CPGT 21.51INSERT


THE MOST UNIQUE LINE OF CUTTING TOOLS AVAILABLE

99-1125

99-1125

SCREW EDP #

SCREW EDP #

SCREW EDP #

SCREW EDP #

SCREW EDP #

SCREW EDP #

99-1125

99-1125

99-1125

18

BO

RIN

G T

OO

LS

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.




THICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK


D11-87 S-98

SHANKLENGTH

6"

INSERT I.C.

3/4 3/8 99-1130 5/32

3"12-1870 12-1873

SHANK DIA.

SCREW EDP #

SHANK STYLES

12-1858 12-1861 12-186412-1867

9" 12-1876 12-1879 12-188212-189112-1885 12-188812"

1" MINIMUM BOREHEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP# INSERT

THICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK


D11-100

SHANKLENGTH

6"

INSERT I.C.

3"12-1906 12-1909

SHANK DIA.

12-1894 12-189712-1903

1-1/8" MINIMUM BOREHEAD I.D. ORDER EDP#ORDER EDP# INSERT

THICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK

D11-112

SHANKLENGTH

6"

INSERT I.C.

1"

3"12-1942

SHANK DIA.

12-1930 12-193312-1939

12"9"

12-192412-1912 12-191512-1921

12-191812-1927

12-1900

9" 12-1948 12-195112-1957 12-196012"

S-983/4 3/8 5/32

S-983/8 5/32

SERIES 12

C-6

CARBIDE GRADE

TIPRADIUS

.032

.032

.032

TIN COATED

C-2 .015.015

17-1370

ORDER EDP#

17-1380

17-1410

17-139017-1400

TIN COATED

C-2C-6

.015

17-1420

TOOL GEOMETRY FOR BORING ALUMINUM & SOFTER MATERIALS



CPGT 32.51

ITI CARBIDE: THE MOST VERSATILE CARBIDE AVAILABLE

SCREW EDP #

SCREW EDP #

99-1130

99-1130



19

BO

RIN

G T

OO

LS

INTERNAL TOOL INC.


ORDER

EDP#

MIN

HOLEOFFSET

GROOVE

WIDTH

MAX

DEPTH

1/4

5/16

.020

.100

1/4

X

2-1/2

O.A.L.

5/16

X

2-1/2

O.A.L.

.017/.018

.025/.026

.033/.034

.038/.039

.062/.064

.093/.095

SERIES 20

GROOVING TOOLS

3/16

X

2-1/2

O.A.L.

1/8

X

2"

O.A.L.

20-117020-117520-118020-118520-119020-119520-120020-120520-121020-121520-122020-122520-123020-123520-124020-124520-125020-125520-126020-126520-127020-127520-128020-128520-129020-1295

G-032-3G-032-4G-032-6G-047-4G-047-6G-047-8G-064-4G-064-6G-064-8G-064-10G-018-4G-018-6G-018-8G-018-10G-026-4G-026-6G-026-8G-026-10G-031-4G-031-6G-031-8G-031-10G-061-4G-061-6G-061-8G-061-10

1/16

.050

.031/.032

.046/.047

3/16

.0303/32

1/8 .062/.063

.017/.018

.025/.026

.030/.031

.062/.063

.040

.050

.062/.064

SHANK &

ITI CARBIDE

3/161/43/81/43/81/21/43/81/25/81/43/81/25/81/43/81/25/81/43/81/25/81/43/81/25/8

20-130020-130520-131020-131520-132020-132520-133020-133520-134020-134520-135020-135520-135620-135720-135820-136020-136520-137020-137520-138020-138520-139020-139520-140020-140520-141020-141520-142020-1425

1/43/81/25/81/43/81/25/81/43/81/25/83/81/25/81/43/81/23/41/43/81/23/41/23/41"1/23/41"

G-017-4G-017-6G-017-8G-017-10G-025-4G-025-6G-025-8G-025-10G-030-4G-030-6G-030-8G-030-10G-060-6G-060-8G-060-10G-033-4G-033-6G-033-8G-033-12G-038-4G-038-6G-038-8G-038-12G-063-8G-063-12G-063-16G-094-8G-094-12G-094-16

TOOL

IDORDER

EDP#

MIN

HOLEOFFSET

GROOVE

WIDTH

MAX

DEPTH

SERIES 20

GROOVING TOOLSOVERALL LENGTH


TOOL

ID

.030/.031


OFFSET

MINHOLE

MAX DEPTH+.050 / -.000

GROOVEWIDTH

2 TYP.

SHANK

SERIES 20 STANDARDSOLID CARBIDEGROOVING TOOL

FOR RETAINING RING GROOVES & INTERNAL RELIEFS.

APPLICATION :

made from

20 ITI CARBIDE: HIGH TRANSVERSE RUPTURE STRENGTH

GR

OO

VE

TO

OL

S

OVERALL LENGTH

SHANK &

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.

ITI Carbide Cutting ToolsTHE LEADER IN INNOVATION

GR

OO

VE

TO

OL

S

21

3/8

3/8

X

2-1/2

O.A.L.

20-143020-143520-144020-144520-145020-145520-146020-146520-147020-147520-148020-148520-149020-149520-150020-150520-151020-151520-152020-152520-153020-153520-154020-154520-155020-155520-156020-156520-157020-1575

G-039-4G-039-6G-039-8G-039-12G-039-16G-039-20G-046-4G-046-6G-046-8G-046-12G-046-16G-046-20G-055-4G-055-6G-055-8G-055-12G-055-16G-055-20G-062-4G-062-6G-062-8G-062-12G-062-16G-062-20G-069-4G-069-6G-069-8G-069-12G-069-16G-069-20

1/43/81/23/41"1-1/41/43/81/23/41"1-1/41/43/81/23/41"1-1/41/43/81/23/41"1-1/41/43/81/23/41"1-1/4

.100

.046/.048

.062/.064

SHANK &ORDER

EDP#

MIN

HOLEOFFSET

GROOVE

WIDTH

MAX

DEPTH

SERIES 20

GROOVING TOOLSOVERALL LENGTH

ITC CARBIDEmade from

TOOL

ID

ORDER

EDP#TOOL

ID

MIN

HOLE

GROOVE

WIDTHOFFSET

MAX

DEPTH

20-158020-158520-159020-159520-160020-160520-161020-161520-162020-162520-163020-163520-164020-164520-165020-165520-166020-166520-167020-167520-168020-168520-169020-169520-170020-170520-171020-171520-172020-172520-173020-173520-174020-174520-175020-175520-1760

1/2

X

3"

O.A.L.

3/8

X

2-1/2

O.A.L.

3/8CONT. .100

1/2.150

.069/.071

1/43/81/23/41"1-1/41/23/41"1/23/41"1/23/41"1-1/41-1/21/23/41"1-1/41-1/21/23/41"1-1/41-1/21/23/41"1-1/41-1/21/23/41"1-1/41-1/2

.087/.089

.093/.095

.125/.127

.093/.095

.125/.127

.156/.158

.187/.189

.250/.252

SHANK &OVERALLLENGTH

G-087-4G-087-6G-087-8G-087-12G-087-16G-087-20G-095-8G-095-12G-095-16G-126-8G-126-12G-126-16G-093-8G-093-12G-093-16G-093-20G-093-24G-125-8G-125-12G-125-16G-125-20G-125-24G-156-8G-156-12G-156-16G-156-20G-156-24G-187-8G-187-12G-187-16G-187-20G-187-24G-250-8G-250-12G-250-16G-250-20G-250-24

.039/.041

.055/.057


OFFSET

MINHOLE

MAX DEPTH+.050 / -.000

GROOVEWIDTH

2 TYP.

SHANK



APPLICATION :

SERIES 20

GROOVING TOOLS ITC CARBIDEmade from

INTERNAL TOOL INC.

ITI Carbide Cutting Tools22 ITI CARBIDE AMERICAN MADE

ORDER

EDP# TOOL

IDENTIFICATION

MIN

HOLEOFFSET

GROOVE

WIDTH

MAX

DEPTH

.094 .0501/4

.125 .0605/16

.0803/8

COMBINATION THREAD & GROOVE

SERIES 52

1/4 X 2-1/2 O.A.L.

5/16 X 2-1/2 O.A.L.

3/8 X 2-1/2 O.A.L.

.156

MINHOLE

OFFSET

60°

GROOVE WIDTH

MAXDEPTH

APPLICATION : THREADING & GROOVING WITH THE SAME TOOL. ITI CARBIDE

GROOVE ID

GROOVE OD

THREAD OD

THREAD ID

made from

MULTI-REACH GROOVING TOOLS

SERIES 06

06-1200-C06-1205-C06-1210-C06-1215-C06-1220-C06-1225-C06-1230-C06-1235-C06-1240-C06-1245-C06-1250-C06-1255-C06-1260-C06-1265-C06-1270-C06-1275-C

MINIMUM HOLE

ORDER EDP#TOOL I.D.

SHANKDIAMETER

1/4"

LG-310-032LG-310-063LG-310-094LG-310-125LG-390-032LG-390-063LG-390-094LG-390-125LG-475-032LG-475-063LG-475-094LG-475-125LG-620-032LG-620-063LG-620-094LG-620-125

.060

SHANK LENGTH

4"

GROOVE WIDTH OFFSET

.032

.063

.094

.125

.032

.063

.094

.125

.032

.063

.094

.125

.032

.063

.094

.125

.310

5/16"

3/8"

4"

6"

6"1/2"

.075

.100

.120

.390

.475

.620

CARBIDE SHANKS PROVIDE MAXIMUM RIDGIDITY.

ITI CARBIDE APPLICATION : MULTI-REACH GROOVING NO LONGER LIMITED BY NECK LENGTH. ONE TOOL REPLACES A SERIES OF OTHERS.

WIDTHS CAN BE SIZED TO YOUR SPECIFICATIONS

ALTINCOATED EDP#

06-120006-120506-121006-121506-122006-122506-123006-123506-124006-124506-125006-125506-126006-126506-127006-1275

made from

GR

OO

VE

TO

OL

S

.500

.7501.000.500.7501.000.500.7501.000

52-110052-110552-111052-111552-112052-112552-113052-113552-1140

TG-240-500TG-240-750TG-240-1000TG-310-500TG-310-750TG-310-1000TG-360-500TG-360-750TG-360-1000

GROOVE WIDTH CAN BE MODIFIED NO EXTRA CHARGE

MINIMUM HOLE

MAX DEPTH

27-1300

27-1305

27-1310

.500

.562

.625

O-096-8

O-141-9

O-144-10

ORDER EDP#

TOOL ID

.375

.250

SHANK

1/4 X 2-1/2 O.A.L.

3/8 X 2-1/2O.A.L.

27-1315

27-1320

27-1325

O-174-12

O-208-13

O-241-15

.750

.812

.940

OFFSET

SERIES 27

.115

.100

GROOVE WIDTH.096/.098

.141/.143

.144/.146

.174/.176

.208/.210

.241/.243

CORNER RADIUS.010/.020

.035/.045

.035/.045

.010/.020

.035/.045

.035/.045

OFFSET

5° TYP.

RADIU S TYP.


MINIMUM HOLE

MAXIMUM DEPTH

O-RING GROOVE TOOLSAPPLICATION : O-RING GROVING WITH TAPERED SIDES ITC CARBIDE

ALTINCOATED #

27-1300-C

27-1305-C

27-1310-C

27-1315-C

27-1320-C

27-1325-C

made from


CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


ORDER

EDP#

MIN

HOLEOFFSET

GROOVE

WIDTH

MAX

DEPTH

SERIES 20

METRIC GROOVING TOOLS ITI CARBIDEmade from

TOOL

ID


OFFSET

MINHOLE

MAX DEPTH+.050 / -.000

GROOVEWIDTH

2 TYP.

SHANK



APPLICATION :

20-992020-993020-994020-995020-996020-997020-998020-998220-998520-999020-9995

.5 MM (.0197)

.9 MM (.0354)1.1 MM (.0433)1.3 MM (.0512)1.85 MM (.0728)2.15 MM (.0847)2.65 MM (.1044)3.0 MM (.1182)3.0 MM (.1182)4.0 MM (.1576)6.0 MM (.2364)

6.5

(.250)

13 MM13 MM13 MM13 MM13 MM13 MM13 MM13 MM19 MM19 MM19 MM

1/4 X 2-1/2O.A.L.

G-.5-13G-.9-13G-1.1-13G-1.3-13G-1.85-13G-2.15-13G-2.65-13G-3.0-13G-3.0-19G-4.0-19G-6.0-19

9.5

(.375)

12.7

(.500)

23

.050

.100

3/8 X 2-1/2O.A.L.

.150 1/2 X 3"O.A.L.

.070

.093

.103

.125

.139

.187

.210

.250

.275

.375

O-RING DOVETAIL GROOVERS BOTTOM RADIUS

EDPNUMBER

O-RING SIZE

DEPTH OF CUT

WIDTH

53-400053-400553-401053-401553-402053-402553-403053-403553-404053-4045

TOP RADIUS

.040

.060

.065

.082

.085

.130

.140

.173

.180

.240

.051

.075

.082

.102

.112

.154

.172

.212

.232

.317

.015

.015

.015

.031

.031

.031

.031

.062

.062

.094

.005

.010

.010

.010

.010

.015

.015

.015

.015

.020

1/8 x 2.01/8 x 2.01/8 x 2.03/16 x 2.53/16 x 2.51/4 x 2.51/4 x 2.51/4 x 2.55/16 x 2.55/16 x 2.5

SERIES 53APPLICATION :

ITI CARBIDE

SHANK SIZE

TOP RADIUS

BOTTOM RADIUS

A FLAT ON BOTH SIDES LET YOU FLIP THETOOL TO CUT BOTH SIDES OF THE SLOT

DEPTH OF CUT

WIDTH

24°

USED TO CUT-TURN 24° O-RING DOVETAILS.THEY CUT WITH BOTH TOP & BOTTOM RADIUS.

MILLING STYLE O'RING TOOLS ARE ON PAGE 58

made from

SERIES 53

GR

OO

VE

TO

OL

S



+/-.0254mm


INTERNAL TOOL INC.


MAX-GROOVE GROOVING TOOLSORDER

EDP#

TOOL

IDENTIFICATION MIN

HOLEOFFSET

GROOVE WIDTH SHANK

MAX

DEPTH

1/4

5/16

3/8

.050

.100

.100

1/4

X

2-1/2

O.A.L.

5/16

X

2-1/2

O.A.L.

3/8

X

2-1/2

O.A.L.

.017/.018

.025/.026

.030/.031

.033/.034

.038/.039

.062/.064

.093/.095

.039/.041

.046/.048

.069/.071

.087/.089

ALTIN COATED MAX-GROOVE GROOVING TOOLS

.062/.064

.093/.095

.125/.127

.125/.127

.055/.057

.062/.064

SERIES 22

MINHOLE

GROOVEWIDTH


MAXDEPTH +.050 /- .000

OFFSET +.020 / -.000 STRONGER ELLIPTICALLYGROUND NECK

APPLICATION :

Max-groove is the Ultimate in grooving tools. Featuring an ellipticalneck for greater strength, a special top rake for maximumshearing action with a better finish, and a ALTINcoating for a longer life.Max-Groove out performs andoutlasts our competitorsgroove tools two to one.

FOR INTERNAL GROOVING AND RELIEVING

ITI CARBIDE

ALTIN: THE VERY LATEST IN

HIGH PERFORMANCE COATING

made from

MG-25-017-250MG-25-017-375MG-25-017-500MG-25-017-625MG-25-025-250MG-25-025-375MG-25-025-500MG-25-025-625MG-25-030-250MG-25-030-375MG-25-030-500MG-25-030-625MG-25-063-250MG-25-063-375MG-25-063-500MG-25-063-625MG-25-094-250MG-25-094-375MG-25-094-500MG-25-094-625MG-25-125-250MG-25-125-375MG-25-125-500MG-25-125-625MG-31-033-250MG-31-033-375MG-31-033-500MG-31-033-625MG-31-038-250MG-31-038-375MG-31-038-500MG-31-038-625MG-31-063-500MG-31-063-750MG-31-063-1000MG-31-094-500MG-31-094-750MG-31-094-1000MG-31-125-500MG-31-125-750MG-31-125-1000

1/43/81/25/81/43/81/25/81/43/81/25/81/43/81/25/81/43/81/25/81/43/81/25/81/43/81/25/81/43/81/25/81/23/41"1/23/41"1/23/41"

22-110022-110522-111022-111522-112022-112522-113022-113522-114022-114522-115022-115522-116022-116522-117022-117522-118022-118522-119022-119522-120022-120522-121022-121522-122022-122522-123022-123522-124022-124522-125022-125522-126022-126522-127022-127522-128022-128522-129022-129522-1300

22-130522-131022-131522-132022-132522-133022-133522-134022-134522-135022-135522-136022-136522-137022-137522-138022-138522-139022-139522-140022-140522-141022-141522-142022-142522-143022-143522-144022-144522-145022-145522-146022-146522-147022-147522-1480

MG-37-039-250MG-37-039-375MG-37-039-500MG-37-039-750MG-37-039-1000MG-37-039-1250MG-37-046-250MG-37-046-375MG-37-046-500MG-37-046-750MG-37-046-1000MG-37-046-1250MG-37-055-250MG-37-055-375MG-37-055-500MG-37-055-750MG-37-055-1000MG-37-055-1250MG-37-063-250MG-37-063-375MG-37-063-500MG-37-063-750MG-37-063-1000MG-37-063-1250MG-37-069-250MG-37-069-375MG-37-069-500MG-37-069-750MG-37-069-1000MG-37-069-1250MG-37-087-250MG-37-087-375MG-37-087-500MG-37-087-750MG-37-087-1000MG-37-087-1250

ORDER

EDP#

TOOL

IDENTIFICATION MIN

HOLEOFFSET

GROOVE WIDTH SHANK

MAX

DEPTH

1/43/81/23/41"1-1/41/43/81/23/41"1-1/41/43/81/23/41"1-1/41/43/81/23/41"1-1/41/43/81/23/41"1-1/41/43/81/23/41"1-1/4

MAX-GROOVE GROOVING TOOLS

24

CONTINUED ON NEXT PAGE

GR

OO

VE

TO

OL

S

INTERNAL TOOL THE LEADER IN INNOVATION

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


GR

OO

VE

TO

OL

S

25

ORDER

EDP#

TOOL

IDENTIFICATION MIN

HOLEOFFSET

GROOVE

WIDTHSHANK

MAX

DEPTH

1/2

X

3"

3/8

X

2-1/2

3/8CONT.

.100

1/2 .150

.093/.095

.125/.127

.093/.095

.125/.127

.156/.158

.187/.189

.250/.252

22-148522-149022-149522-150022-150522-151022-151522-152022-152522-153022-153522-154022-154522-155022-155522-156022-156522-157022-157522-158022-158522-159022-159522-160022-160522-161022-161522-162022-162522-163022-163522-164022-164522-165022-165522-1660

.062/.064

1/23/41"1/23/41"1/23/41"1-1/41-1/21/23/41"1-1/41-1/21/23/41"1-1/41-1/21/23/41"1-1/41-1/21/23/41"1-1/41-1/21/23/41"1-1/41-1/2

MG-37-094-500MG-37-094-750MG-37-094-1000MG-37-125-500MG-37-125-750MG-37-125-1000MG-50-063-500MG-50-063-750MG-50-063-1000MG-50-063-1250MG-50-063-1500MG-50-094-500MG-50-094-750MG-50-094-1000MG-50-094-1250MG-50-094-1500MG-50-125-500MG-50-125-750MG-50-125-1000MG-50-125-1250MG-50-125-1500MG-50-156-500MG-50-156-750MG-50-156-1000MG-50-156-1250MG-50-156-1500MG-50-187-500MG-50-187-750MG-50-187-1000MG-50-187-1250MG-50-187-1500MG-50-250-500MG-50-250-750MG-50-250-1000MG-50-250-1250MG-50-250-1500


OFFSET +.020 / -.000 STRONGER ELLIPTICALLYGROUND NECK

APPLICATION :

Max-groove is the Ultimate in grooving tools. Featuring an ellipticalneck for greater strength, a special top rake for maximumshearing action with a better finish, and a ALTINcoating for a longer life.Max-Groove out performs andoutlasts our competitorsgroove tools two to one.

FOR INTERNAL GROOVING AND RELIEVING

ALTIN COATED MAX-GROOVE GROOVING TOOLS

MAX-GROOVE GROOVING TOOLS

SERIES 22


MINHOLE

GROOVEWIDTH

MAXDEPTH +.050 /- .000


INTERNAL TOOL INC.

ITI Carbide Cutting Tools26 THE MOST UNIQUE LINE OF CUTTING TOOLS AVAILABLE

.039 .062

.048

.046

.040

.033

.018

MAX DEPTH

ORDER EDP#

.056

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

.029

.032

GROOVE WIDTH

GROOVE WIDTH

MINIMUMHOLE IS .185

MAX DEPTH

OFFSET IS .060

QUICK CHANGE

GROOVING TOOLS

SERIES 42

ITI CARBIDE

42-700042-700542-701042-701542-702042-702542-703042-703542-704042-704542-705042-705542-706042-706542-707042-707542-708042-708542-709042-709542-710042-710542-711042-711542-712042-712542-713042-713542-714042-7145

ALTINCOATED EDP#

made from

42-7000-C42-7005-C42-7010-C42-7015-C42-7020-C42-7025-C42-7030-C42-7035-C42-7040-C42-7045-C42-7050-C42-7055-C42-7060-C42-7065-C42-7070-C42-7075-C42-7080-C42-7085-C42-7090-C42-7095-C42-7100-C42-7105-C42-7110-C42-7115-C42-7120-C42-7125-C42-7130-C42-7135-C42-7140-C42-7145-C

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

42-715042-715542-716042-716542-717042-717542-718042-718542-719042-719542-720042-720542-721042-721542-722042-722542-723042-723542-724042-724542-725042-725542-726042-726542-727042-727542-728042-728542-729042-7295


MAX DEPTH

ORDER EDP#

GROOVE WIDTH

ALTINCOATED EDP#

ALL TOOLS HAVE A GROUND ANGLE ON THE SHANKWHICH LOCKS IN PLACE AGAINST A LOCATING PIN,MAINTAINING AN EXACT RADIAL AND AXIAL POSITION

HOLDERS ARE AVAILABLE WITH3/8, 1/2, 5/8, & 3/4 SHANK SIZES.

STANDARD STYLE3/8" SHANK EDP# 42-90001/2" SHANK EDP# 42-90055/8" SHANK EDP# 42-90103/4" SHANK EDP# 42-901522 MM SHANK EDP# 42-9020

SERIES 42SOLID CARBIDEQUICK CHANGEGROOVING TOOL

QUICK CHANGE

GROOVING TOOLS

SERIES 42

HOLDERS ARE AVAILABLE WITH3/8, 1/2, 5/8, & 3/4 SHANK SIZES.

COOLANT HOLE STYLE3/8" SHANK EDP #42-95001/2" SHANK EDP #42-95055/8" SHANK EDP #42-95103/4" SHANK EDP #42-951522 MM SHANK EDP #42-9520

EXTRA SCREW EDP# 42-8888

GR

OO

VE

TO

OL

S

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


GR

OO

VE

TO

OL

S

ORDER

EDP#

TOOL

ID

MIN

BORE OFFSETGROOVE

WIDTH


MAX

DEPTH

1/4

5/16

3/8

.050

.100

.100

1/4

X

2-1/2

O.A.L.

5/16

X

2-1/2

O.A.L.

3/8

X

2-1/2

O.A.L.

ORDER

EDP#

TOOL

ID OFFSETGROOVE

WIDTH

MAX

DEPTH

24-155024-155524-156024-156524-157024-157524-158024-158524-159024-159524-160024-160524-161024-161524-162024-162524-163024-163524-164024-164524-165024-165524-166024-166524-167024-167524-168024-168524-169024-169524-170024-170524-171024-171524-172024-172524-173024-173524-174024-174524-175024-175524-1760

1/2

X

3"

O.A.L.

R-069-4R-069-6R-069-8R-069-12R-069-16R-069-20R-087-4R-087-6R-087-8R-087-12R-087-16R-087-20R-095-8R-095-12R-095-16R-126-8R-126-12R-126-16R-093-8R-093-12R-093-16R-093-20R-093-24R-125-8R-125-12R-125-16R-125-20R-125-24R-156-8R-156-12R-156-16R-156-20R-156-24R-187-8R-187-12R-187-16R-187-20R-187-24R-250-8R-250-12R-250-16R-250-20R-250-24

.017

.018

1/2 .150

SERIES 24

MINBORE

GROOVEWIDTH

2°TYP.

OFFSET

MAX DEPTH


FULL RADIUS GROOVING TOOLS

FULL RADIUSGROOVING TOOLS

APPLICATION : FULL RADIUS GROOVES AND PROFILE WORK.


ITI CARBIDE

ITI CARBIDE: THE MOST VERSATILE CARBIDE AVAILABLE

.025

.026

.030

.031

.062

.064

.033

.034

.038

.039

.062

.064

.093

.095

.039

.041

.046

.048

.055

.057

.062

.064

.069

.071

.087

.089

.093

.095

.125

.127

ALTINCOATED EDP#

ALTINCOATED EDP#

.093

.095

.125

.127

.156

.158

.187

.189

.250

.252

made from

1/43/81/25/81/43/81/25/81/43/81/25/83/81/25/81/43/81/25/83/41/43/81/23/41/23/41"1/23/41"1/43/81/25/83/41"1-1/41/43/81/23/41"1-1/41/43/81/23/41"1-1/41/43/81/23/41"1-1/4

R-017-4R-017-6R-017-8R-017-10R-025-4R-025-6R-025-8R-025-10R-030-4R-030-6R-030-8R-030-10R-060-6R-060-8R-060-10R-033-4R-033-6R-033-8R-033-10R-033-12R-038-4R-038-6R-038-8R-038-12R-063-8R-063-12R-063-16R-094-8R-094-12R-094-16R-039-4R-039-6R-039-8R-039-10R-039-12R-039-16R-039-20R-046-4R-046-6R-046-8R-046-12R-046-16R-046-20R-055-4R-055-6R-055-8R-055-12R-055-16R-055-20R-062-4R-062-6R-062-8R-062-12R-062-16R-062-20

24-1300-C24-1305-C24-1310-C24-1315-C24-1320-C24-1325-C24-1330-C24-1335-C24-1340-C24-1345-C24-1350-C24-1355-C24-1356-C24-1357-C24-1358-C24-1360-C24-1365-C24-1370-C24-1372-C24-1375-C24-1380-C24-1385-C24-1390-C24-1395-C24-1400-C24-1405-C24-1410-C24-1415-C24-1420-C24-1425-C24-1430-C24-1435-C24-1440-C24-1442-C24-1445-C24-1450-C24-1455-C24-1460-C24-1465-C24-1470-C24-1475-C24-1480-C24-1485-C24-1490-C24-1495-C24-1500-C24-1505-C24-1510-C24-1515-C24-1520-C24-1525-C24-1530-C24-1535-C24-1540-C24-1545-C

24-130024-130524-131024-131524-132024-132524-133024-133524-134024-134524-135024-135524-135624-135724-135824-136024-136524-137024-137224-137524-138024-138524-139024-139524-140024-140524-141024-141524-142024-142524-143024-143524-144024-144224-144524-145024-145524-146024-146524-147024-147524-148024-148524-149024-149524-150024-150524-151024-151524-152024-152524-153024-153524-154024-1545

24-1550-C24-1555-C24-1560-C24-1565-C24-1570-C24-1575-C24-1580-C24-1585-C24-1590-C24-1595-C24-1600-C24-1605-C24-1610-C24-1615-C24-1620-C24-1625-C24-1630-C24-1635-C24-1640-C24-1645-C24-1650-C24-1655-C24-1660-C24-1665-C24-1670-C24-1675-C24-1680-C24-1685-C24-1690-C24-1695-C24-1700-C24-1705-C24-1710-C24-1715-C24-1720-C24-1725-C24-1730-C24-1735-C24-1740-C24-1745-C24-1750-C24-1755-C24-1760-C

3/8 3/8

X

2-1/2

O.A.L.

.100

FULL RADIUSGROOVING TOOLS

1/43/81/23/41"1-1/41/43/81/23/41"1-1/41/23/41"5/83/81/21/23/41"1-1/41-1/21/23/41"1-1/41-1/21/23/41"1-1/41-1/21/23/41"1-1/41-1/21/23/41"1-1/41-1/2

MIN

BORE

INTERNAL TOOL INC.


MA

XIM

UM

DE

PT

HW

IDTH

OFFS

ET

RA

DIU

S S

HA

NK

SID

ER

AD

IUS

FR

ON

T S

IDE

FU

LL RA

DIU

SY

ES

OR

NO

?

Quote in quanites of ?

TH

E M

OR

E Y

OU

BU

YT

HE

CH

EA

PE

R T

HE

Y G

ET

INT

ER

NA

L S

HA

NK

DIA

ME

TE

R T

RY

TO

KE

EP

SA

ME

SIZ

E A

S O

R L

AR

GE

R T

HA

N T

HE

HE

AD

OV

ER

AL

L L

EN

GT

H If n

ot su

re le

ave

bla

nk

we

will q

uo

te sta

nd

ard

MA

JOR

DIA

ME

TE

R T

ry to keep same size

as shank or smaller

INT

ER

NA

L T

OO

L

DR

AW

N B

Y:

RE

V:

TO

OL N

UM

BE

R:

DA

TE:

TO

LER

AN

CE

UN

LES

SO

THE

RW

ISE

SP

EC

IFIED

.X =

+/- 1/32

.XX

= +

/- .010.X

XX

= +

/- .002.X

XX

X =

/- .0005A

NG

LES

+/- 0.15°

RE

VIS

ION

S:

YO

UR

CO

MP

AN

Y N

AM

E:

CO

NT

AC

T :

PH

ON

E:

FA

X:

YO

UR

DIS

TR

IBU

TO

R:

QU

AN

ITY

:

Sim

ply make a copy

fill in the information below

and fax or email to us. fax # 909-392-2627

we w

ill quote as soon as possible. INF

O@

internaltool.com

28

SPECIAL GROOVING TOOLS


GR

OO

VE

TO

OL

S

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


ORDER

EDP# TOOL I.D. INC.

ANGLE

30°

SERIES 39

EX-30-DBL

EX-60-DBL

EX-90-DBL

EX-120-DBL

39-1000

39-1005

39-1010

39-1015

.216

EXTERNAL THREAD / CHAMFER TOOLS

60°

90°

WIDTH TYPE

120°

DBLANGLE

DBLANGLE

DBLANGLE

DBLANGLE

DEPTH

FOUR

ANGLES

TO

CHOOSE

FROM

WIDTH DEPTH

3/8"

.250

.102 .190

.187 .187

.187 .108

2-1/2"

OVERALL

LENGTH

SERIES 39

39-740039-741039-742039-7430

ORDER

EDP# TO FIT IN

THIS SIZE SLOT

1/2" SQUARE5/8" SQUARE3/4" SQUARE1" SQUARE

HOLDERS

TO FIT IN SLOT

3/8 BORE THROUGH

TWO SET

SCREWS ON TOP

ORDER

EDP# TOOL I.D.

SERIES 39

EX-030-RET

EX-035-RET

EX-041-RET

EX-047-RET

EX-056-RET

EX-068-RET

39-6000

39-6005

39-6010

39-6015

39-6020

39-6025

.075

EXTERNAL GROOVE TOOLSWIDTH DEPTH

DEPTH

.125

.130

.041 / .042

.072

.090

.095

.035 / .036

.030 / .031

.047 / .049

.056 / .057

.068 / .071

3/8 SHANK

2-1/2"

OVERALL

LENGTH

WIDTH

3/8 X 2-1/2 O.A.L.

5/16 X 2-1/2 O.A.L.

1/4 X 2-1/2 O.A.L.

1/2 X 3" O.A.L.

3/16 X 2-1/2 O.A.L.

ORDER

EDP#

TOOL

IDENTIFICATION MIN

HOLE

NECK

DIA. FLAT

WIDTH

MAX

DEPTH

LA-115-500LA-115-750LA-175-750LA-175-1000LA-240-750LA-240-1250LA-300-750LA-300-1250LA-360-750LA-360-1250LA-490-1000LA-490-1500

43-200043-200543-201043-201543-202043-202543-203043-203543-204043-204543-205043-2055

.030 .500.750.7501.000.7501.250.7501.250.7501.2501.0001.500

.075.115

.125.175

.170.240

.210.300

.250.360

.350.490

SERIES 43

1/8 X 2" O.A.L.

MAXDEPTH

NECK DIA. MINHOLE


FLATWIDTH

90°

LATHE I.D. CHAMFER TOOLS APPLICATION : INSIDE CHAMFERS

CHAMFER LENGTH

ITI CARBIDE

.030

.030

.030

.030

.030

CHAMFER

LENGTH

.040

.050

.070

.090

.110

.140

made from

GR

OO

VE

TO

OL

S



INTERNAL TOOL INC.


.640 MINIMUM BOREHEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP# INSERT

THICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK


G-640 S-16-S

SHANKLENGTH

6"

INSERT I.C.

1/2 3/8 99-1155 9/64

3"26-1120 26-1125

SHANK DIA.

SCREW EDP #

SHANK STYLES

26-1100 26-1105 26-111026-1115

9" 26-1130 26-1135 26-114026-115526-1145 26-115012"

.750 MINIMUM BOREHEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP#

SCREWNUMBER

CARBIDESHANK

STEELSHANK


G-750

SHANKLENGTH

6"

INSERT I.C.

5/8

3"26-1180 26-1185

SHANK DIA.

SHANK STYLES

26-1160 26-1165 26-117026-1175

9" 26-1190 26-1195 26-120026-121526-1205 26-121012"

LAY-DOWN STYLE INSERT GROOVE TOOLS

CARBIDE GRADE

.031

.031

.047

C-2 UNCOATED TIN COATED

.047

.062

ORDER EDP#

SERIES 26

S-163/8 9/64

GROOVE WIDTH

.078

.062

.078.094.094.097

.125

.125

.097







SERIES 26



26-170026-173526-170526-174026-171026-174526-171526-175026-172026-175526-172526-176026-173026-1765

CUTTING DEPTH

.046

.046

.062

.062

.062

.062

.078

.078

.078

.078

.070

.070

.050

.050

SCREW EDP #

99-1155

INSERTTHICKNESS

NOTICE: INSERT GROOVING BARS ARE MADE TO ORDER; PLEASE CALL FOR DELIVERY TIME,


GR

OO

VE

TO

OL

S

30

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


SCREW #

BHF-0203SBHF-0203BBHF-0306RBFX-0410RS-90S-95S-98S-98-SS-6S-8S-11S-16-SS-16BHF-0308RBFTX-02506

99-110099-110599-111099-111599-112099-112599-113099-113299-113599-114599-115099-115599-116099-116599-1170

ORDER

EDP#

REPLACEMENT HEADS

ORDER

EDP#MIN BORE INSERT I.C.

SHANK

DIA.

T11-31T11-37T11-43T11-50T11-56T11-62T11-68T11-75T11-87T11-10T11-11

5/163/87/161/29/165/811/163/47/81"1-1/8

11 DEGREE TRIANGLESERIES 40

HEAD I.D.

40-111040-111540-112040-112540-113040-113540-114040-114540-115040-115540-1160

INSERT

THICKNESS

1/45/163/83/81/21/25/85/83/43/41"

TBGP-520TPGP-630TPGP-630TPGG-22YLTPGG-22YLTPGG-22YLTPGG-22YLTPGG-22YLTPGG-33YLTPGG-33YLTPGG-33YL

ORDER


SHANK

DIA.

D07-37D07-43D07-50D07-56D07-62D07-62BD07-68D07-68BD07-75D07-75BD07-87D07-10D07-11

3/87/161/29/165/85/811/1611/163/43/47/81"1-1/8

7 DEGREE DIAMONDHEAD I.D.

40-116540-117040-117540-118040-118540-118740-119040-119240-119540-119740-120040-120540-1210

INSERT

THICKNESS

5/163/83/81/21/21/25/85/85/85/83/43/41"

ORDER


SHANK

DIA.

D11-37D11-43D11-50D11-56D11-62D11-68D11-75D11-87D11-10D11-11

3/87/161/29/165/811/163/47/81"1-1/8

11 DEGREE DIAMONDHEAD I.D.

40-121540-122040-122540-123040-123540-124040-124540-125040-125540-1260

INSERT

THICKNESS

5/163/83/81/21/25/85/83/43/41"

ORDER

EDP#MIN BORE I.C.

SHANK

DIA.

T001T002T003T003.5T004T005T006T007T008

.236

.307

.354

.390

.470

.625

.640

.7501.000

LAY DOWN STYLETHREADING TOOLS

HEAD I.D.

40-126540-127040-127540-127740-128040-128540-129040-129540-1300

3/161/45/165/163/81/21/25/83/4

ORDER

EDP#MIN BORE I.C.SHANK

DIA.

G-640G-750

.640

.750

LAY DOWN STYLEGROOVING TOOLS

HEAD I.D.

40-130540-1310

1/25/8

3/83/8

5/323/163/161/41/41/43/83/83/8

5/323/163/161/41/41/41/41/43/83/83/8

1/163/323/321/81/81/81/81/83/163/163/16

1/41/41/41/41/43/81/43/81/43/83/83/83/8

3/323/323/323/323/325/323/325/323/325/325/325/325/32

CCMT-21.51CCMT-21.51CCMT-21.51CCMT-21.51CCMT-21.51CCMT-32.51CCMT-21.51CCMT-32.51CCMT-21.51CCMT-32.51CCMT-32.51CCMT-32.51CCMT-32.51

CPGT-21.51CPGT-21.51CPGT-21.51CPGT-21.51CPGT-21.51CPGT-21.51CPGT-21.51CPGT-32.51CPGT-32.51CPGT-32.51

1/41/41/41/41/41/41/43/83/83/8

3/323/323/323/323/323/323/325/325/325/32

SERIES 40

SERIES 40

SERIES 40

SERIES 40

OVER 3000 TOOLS NOW AVAILABLE 31

SCREWS

INTERNAL TOOL INC.


SB-125SB-187SB-250SB-312SB-375SB-437SB-500SB-125-5SB-187-5SB-250-5SB-312-5SB-375-5

ORDER

EDP#

SERIES 70

SPLIT

LENGTH

2"

2-1/2

2-1/2

2-1/2

2-1/2

3"

ORDER

EDP#

TOOL

IDENTIFICATION

SERIES 70

SPLIT

LENGTH DIAMETER

OVERALL

LENGTH

SP-125-SGL

SP-187-SGL

SP-250-SGL

SP-312-SGL

SP-375-SGL

SP-500-SGL

70-1100

70-1105

70-1110

70-1115

70-1120

70-1125

1/8

3/16

1/4

5/16

3/8

1/2

1-1/2"

2"

2"

2"

2"

2-1/2"

DOUBLE END SPLIT BLANKS

SINGLE END SPLIT BLANKSOVERALLLENGTH

SPLITLENGTH

OVERALLLENGTH

SPLITLENGTH

ALL GROUND WITHSET SCREW FLATON TOP

LONG LENGTH SINGLE END SPLIT BLANKS

ORDER

EDP#

SPLIT

LENGTH

3/8 4"

4"

4"

4"

6"

6"

3/8

3/8

1/2

1/2

5/8

SERIES 70

SPLIT BLANKS

ALL GROUND WITHSET SCREW FLATON TOP

ALL GROUND WITH SET SCREW FLAT ON TOP

APPLICATION :A BLANK THAT THE USER CAN GRIND INTO THEIR OWN SPECIAL TOOL.

OVERALL LENGTH

1/4

5/16

3/8

1/2

1/2

5/8

1/8

3/16

1/4

5/16

3/8

1/2

1/4

5/16

3/8

1/2

1/2

5/8

70-1200

70-1205

70-1210

70-1215

70-1220

70-1225

SP-125-DBL

SP-187-DBL

SP-250-DBL

SP-312-DBL

SP-375-DBL

SP-500-DBL

DIAMETER TOOL

IDENTIFICATION

OVERALL

LENGTH

70-1400

70-1405

70-1410

70-1415

70-1420

70-1425

1/8

3/16

1/4

5/16

3/8

1/2

TOOL

IDENTIFICATIONOVERALL

LENGTH

SP-125-LNG

SP-187-LNG

SP-250-LNG

SP-312-LNG

SP-375-LNG

SP-500-LNG

DIAMETER

ITI CARBIDE

ITI CARBIDE

ITI CARBIDE

APPLICATION :A DOUBLE END BLANK THAT THE USER CAN GRIND INTO THEIR OWN SPECIAL TOOL.

APPLICATION :A LONG LENGTH BLANK THAT THE USERCAN GRIND INTO THEIR OWN SPECIAL TOOL.

ORDER

EDP#BUSHING

ID

SERIES 94

INSIDE

DIAMETER

O.A.L.

LENGTH

OUTSIDE

DIAMETER

1/2

5/8 1-1/4

SPLIT BUSHINGS

1-1/4

5/8" DIA FOR USE IN HARDINGETYPE HOLDERS

1/2" DIA FOR USE IN CRITERIONTYPE HEADS

1/4" WIDE KNURLED HEAD FOR BETTER GRIP

SET SCREW FLAT

APPLICATION :USED TO HOLD OUR BORING & GROOVING TOOLS

94-110094-110594-111094-111594-112094-112594-113094-113594-114094-114594-115094-1155

1/83/161/45/163/87/161/21/83/161/45/163/8

SPLITLENGTH


made from

made from

made from

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


SERIES 73

ORDER

EDP#

73-100073-100573-101073-101573-102073-102573-1030

HOLDERSORDER

EDP#SHANK

SIZEOVERALL

LENGTH

96-130096-130596-1310

4"

SERIES 96

ORDER

EDP#

BUSHING

SIZE

1/4 96-1930

FACE GROOVER BUSHING

5/8 ROUND3/4 ROUND1" SQUARE

GROOVEWIDTH

GROOVEWIDTH

GROOVE DEPTH

GROOVEDEPTH

60 OR 90DEGREEI NC.

GROOVEDEPTH

GROOVE WIDTH

.017

.025

.032

.063

.094

.125

.187

.040

.065

.080

.150

.200

.200

.200

ORDER

EDP#

73-200073-200573-201073-201573-202073-202573-2030

GROOVE DEPTH

GROOVE WIDTH

.017

.025

.032

.063

.094

.125

.187

.040

.065

.080

.150

.200

.200

.200

ORDER

EDP#

73-400073-4500

INCLUDED ANGLE

60°90° TOOLS ARE ROUND SHANK AND CAN BE HELD IN A COLLET BUT FOR EASE

OF USE AND FASTER TOOL CHANGES WE RECOMMENDOUR SERIES 96 HOLDER SHOWN HERE.

FACE GROOVERS

SHANK SIZE IS 1/4"

SQUARE NOSE double end

FULL RADIUS NOSE double end

DOUBLE ANGLE

SHANK SIZE IS 1/4"WILL CUT ANY FACE GROOVELARGER THAN 1/4 INCH IN DIAMETER.

SINGLE END FACE / ODGROOVE TOOLS

73-600073-600573-601073-601573-602073-602573-603073-6035

GROOVE DEPTH

GROOVE WIDTH

.032

.063

.094

.125

.187

.250

.312

.370

.095

.180

.250

.280

.300

.375

.500

.600

FULL RADIUS NOSE

SERIES 73

RIGHT HAND

ORDER EDP#

73-500073-500573-501073-501573-502073-502573-503073-5035

.032

.063

.094

.125

.187

.250

.312

.370

.095

.180

.250

.280

.300

.375

.500

.600

SQUARE NOSE

SHANK SIZE IS 1/4"WILL CUT ANY FACE GROOVELARGER THAN 1/4 INCH IN DIAMETER.

3/8

1/4

MIN

DIA.

3/8

1/4

MIN

DIA.

GROOVE DEPTH

GROOVE WIDTH

APPLICATION : SIMILAR TO ABOVE EXCEPT SINGLE END.LONGER SHANKS WITH LARGER DIAMETERSAND GREATER DEPTHS OF CUT.CAN ALSO BE USED FOR OD GROOVING.

APPLICATION : USED TO CREATE ANY FACE GROOVE WITH A MAJOR DIAMETER GREATER THAN 1/4"

SHANK SIZE(min groove dia.)

GROOVE WIDTH

GROOVE DEPTH

OVERALLLENGTH IS 2-1/2

TOOLS ARE ROUND SHANK AND CAN BE HELD IN A COLLET BUT FOREASE OF USE AND FASTER TOOL CHANGES WE RECOMMENDOUR SERIES 98 HOLDER SHOWN ON PAGE 12

ITI CARBIDE

ORDER

EDP#

73-700073-702073-7030

GROOVE DEPTH

GROOVE WIDTH

.094

.125

.187

.325

.400

.500

PART-OFF NOSE

3/8

1/4

MIN

DIA.

ITI CARBIDE


DOUBLE END FACE / OD GROOVE TOOLS ALTINCOATED EDP#

73-1000-C73-1005-C73-1010-C73-1015-C73-1020-C73-1025-C73-1030-C

ALTINCOATED EDP#

73-2000-C73-2005-C73-2010-C73-2015-C73-2020-C73-2025-C73-2030-C

TIALNCOATED EDP#

73-4000-C73-4500-C

73-750073-750573-751073-751573-752073-752573-753073-7535

73-800073-800573-801073-801573-802073-802573-803073-8035

LEFT HAND

ORDER EDP#

RIGHT HAND

ORDER EDP#

LEFT HAND

ORDER EDP#

RIGHT HAND TOOL

LEFT HAND TOOL

LEFT HAND TOOL

min groove dia. is .250

PART-OFF TOOL

10°

RIGHT HAND TOOL

made from

made from

INTERNAL TOOL INC.


ORDER EDP#

TOOL I.D.

MIN BORE

OFFSET SHANK MAXDEPTH

.040

1/4 X2-1/2O.A.L.

.180

.200 .045

.230 .055

.290 .070

.320 .075

.360 .085

.490 .120

1/4 X2-1/2O.A.L.

5/16 X2-1/2O.A.L.

5/16 X2-1/2O.A.L.

3/8 X2-1/2O.A.L.

3/8 X2-1/2O.A.L.

1/2 X3"O.A.L.

RIGHT HANDTHREADING TOOLS

TL-180-500TL-180-750TL-180-1000TL-200-500TL-200-750TL-200-1000TL-230-500TL-230-750TL-230-1000TL-290-500TL-290-750TL-290-1000TL-320-500TL-320-750TL-320-1000TL-360-500TL-360-750TL-360-1000

.040 1/4 X2-1/2

.500

.7501.000.500.7501.000.500.7501.000.500.7501.000.500.7501.000.500.7501.000

.180

.200 .045

.230 .055

.290 .070

.320 .075

.360 .085

5/16 X2-1/2

3/8 X2-1/2

LEFT HAND THREADING TOOLS

SERIES 30

SERIES 31

OFFSET

OFFSET

MIN BORE

MIN BORE

MAXDEPTH

MAXDEPTH ALL SHANKS HAVE LOCKDOWN FLATS

FOR FASTER SETUPS


THREADING TOOLS

.060

.090

.120

.140

.020

.025

.030

.035

1/8 X 2"O.A.L.

1/8 X 2"O.A.L.

3/16 X 2-1/2O.A.L.

3/16 X 2-1/2O.A.L.

APPLICATION : LEFT HAND AND EXTERNAL THREADING.

APPLICATION : RIGHT HAND ID THREADING.

ORDER EDP#

TOOL I.D.

MIN BORE SHANK

MAXDEPTH

60°

60°

OFFSET

ITI CARBIDE

ITI CARBIDE

T-060-150T-060-200T-060-300T-090-200T-090-300T-090-400T-120-300T-120-400T-120-500T-140-300T-140-400T-140-500T-160-400T-160-500T-160-750T-160-1000T-180-350T-180-500T-180-750T-180-1000T-200-400T-200-600T-200-750T-200-1000T-230-400T-230-600T-230-750T-230-1000T-230-1500T-290-500T-290-750T-290-1000T-290-1250T-290-1500T-290-1750T-320-500T-320-750T-320-1000T-320-1250T-320-1500T-320-1800

.160 .040 3/16 X 2-1/2O.A.L.

OVER 3000 TOOLS NOW AVAILABLE

ALTINCOATED EDP#

made from

made from

1/4 X2-1/2

5/16 X2-1/2

3/8 X2-1/2

30-1340-C30-1345-C30-1350-C30-1355-C30-1360-C30-1365-C30-1370-C30-1375-C30-1380-C30-1385-C30-1390-C30-1395-C30-1396-C30-1397-C30-1398-C30-1399-C30-1400-C30-1405-C30-1410-C30-1415-C30-1420-C30-1425-C30-1430-C30-1435-C30-1440-C30-1445-C30-1450-C30-1455-C30-1460-C30-1465-C30-1470-C30-1475-C30-1480-C30-1482-C30-1485-C30-1490-C30-1495-C30-1500-C30-1505-C30-1507-C30-1510-C

T-360-500T-360-750T-360-1000T-360-1250T-360-1500T-360-1800T-490-750T-490-1000T-490-1500T-490-2000

30-1515-C30-1520-C30-1525-C30-1530-C30-1532-C30-1535-C30-1540-C30-1542-C30-1545-C30-1550-C

31-120031-120531-121031-121531-122031-122531-123031-123531-124031-124531-125031-125531-126031-126531-127031-127531-128031-1285

30-134030-134530-135030-135530-136030-136530-137030-137530-138030-138530-139030-139530-139630-139730-139830-139930-140030-140530-141030-141530-142030-142530-143030-143530-144030-144530-145030-145530-146030-146530-147030-147530-148030-148230-148530-149030-149530-150030-150530-150730-1510

.150

.200

.300

.200

.300

.400

.300

.400

.500

.300

.400

.500

.400

.500

.7501.000.350.500.7501.000.400.600.7501.000.400.600.7501.0001.500.500.7501.0001.2501.5001.750.500.7501.0001.2501.5001.800

.500

.7501.0001.2501.5001.800.7501.0001.5002.000

30-151530-152030-152530-153030-153230-153530-154030-154230-154530-1550

ORDER EDP#

TOOL I.D.

MIN BORE

OFFSET SHANK MAXDEPTH

ALTINCOATED EDP#

RIGHT HANDTHREADING TOOLS CONT.

TH

RE

AD

T

OO

LS

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


ORDER EDP#

MIN BORE

OFFSETTHREADS PER INCH

MAXDEPTH

.045.200

.290 .070

.360 .085

ACME THREADING TOOLS STUB ACME THREADING TOOLS

SERIES 32-34

SERIES 34 FLAT

WIDTH SHANK

.021 1/4 X2-1/2

.024 5/16 X2-1/2

3/8 X2-1/2

16

12

14

.032.490 .12010 1/2 X 3"

.028

.0418 .120.490

.0576 .120.490

.088

5 .120.490

ORDER EDP#

OFFSETTHREADS PER INCH

MAXDEPTH

34-140034-140534-141034-141534-142034-142534-143034-143534-144034-144534-145034-145534-146034-146534-147034-147534-148034-148534-149034-149534-150034-150534-151034-151534-152034-152534-153034-153534-154034-154534-155034-1555

.045

.400

.600

.7501.000.500.7501.0001.2501.750.500.7501.0001.2501.800.7501.5002.000.7501.5002.000.7501.5002.000.7501.5002.000.7501.5002.000.7501.5002.000

.200

.290 .070

.360 .085

FLAT

WIDTHSHANK

.024 1/4 X2-1/2

.028 5/16 X2-1/2

3/8 X2-1/2

16

12

14

.037.490 .12010

.033

.0488 .120.490

.0557 .120.490

.0656 .120.490

.490 .1209 .042

.0795 .120.490

ACME AND STUB ACME THREADING TOOLS

MINBORE

29° INC.

MAXDEPTH

FLATWIDTH

OFFSET


APPLICATION :ACME ID THREADING

SERIES 32 ITI CARBIDE

ITI CARBIDE

MIN BORE

ITI CARBIDE: MAXIMUM SHEAR WITH MINIMUM WEAR

32-120032-120532-121032-121532-122032-122532-123032-123532-124032-124532-125032-125532-126032-126532-127032-127532-128032-128532-129032-129532-130032-130532-131032-131532-132032-132532-133032-133532-1340

.490 4 .150

.069

.400

.600

.7501.000.500.7501.0001.2501.750.500.7501.0001.2501.800.7501.5002.000.7501.5002.000.7501.5002.000.7501.5002.000.7501.5002.000

1/2 X 3"

1/2 X 3"

1/2 X 3"

1/2 X 3"

1/2 X 3"O.A.L.

ORDER

EDP#

TOOL

IDENTIFICATIONPITCH

TIP

WIDTH

.021

.024

.028

.032

.041

.057

.069

.088

161412108654

SERIES 33

EX-16-ACMEEX-14-ACMEEX-12-ACMEEX-10-ACMEEX-8-ACMEEX-6-ACMEEX-5-ACMEEX-4-ACME

33-100033-100533-101033-101533-102033-102533-103033-1035

EXTERNAL ACME THREAD TOOLS

EXTERNAL STUB ACME THREAD TOOLS

ORDER

EDP#

TOOL

IDENTIFICATIONPITCH TIP

WIDTH

.024

.028

.033

.037

.042

.048

.055

.065

.079

1614121098765

EX-16-STUBEX-14-STUBEX-12-STUBEX-10-STUBEX-9-STUBEX-8-STUBEX-7-STUBEX-6-STUBEX-5-STUB

33-200033-200533-201033-201533-202033-202533-203033-203533-2040

SERIES 33

TIP WIDTH

3/8" SHANK

29° INC.

ALTINCOATED EDP#

32-1200-C32-1205-C32-1210-C32-1215-C32-1220-C32-1225-C32-1230-C32-1235-C32-1240-C32-1245-C32-1250-C32-1255-C32-1260-C32-1265-C32-1270-C32-1275-C32-1280-C32-1285-C32-1290-C32-1295-C32-1300-C32-1305-C32-1310-C32-1315-C32-1320-C32-1325-C32-1330-C32-1335-C32-1340-C

34-1400-C34-1405-C34-1410-C34-1415-C34-1420-C34-1425-C34-1430-C34-1435-C34-1440-C34-1445-C34-1450-C34-1455-C34-1460-C34-1465-C34-1470-C34-1475-C34-1480-C34-1485-C34-1490-C34-1495-C34-1500-C34-1505-C34-1510-C34-1515-C34-1520-C34-1525-C34-1530-C34-1535-C34-1540-C34-1545-C34-1550-C34-1555-C

ALTINCOATED EDP#

1/2 X 3"O.A.L.

1/2 X 3"O.A.L.

1/2 X 3"O.A.L.

1/2 X 3"O.A.L.

1/2 X 3"

made from

made from

TH

RE

AD

T

OO

LS

INTERNAL TOOL INC.


3/8 X 2-1/2 O.A.L.

5/16 X 2-1/2 O.A.L.

1/4 X 2-1/2 O.A.L.

1/2 X 3" O.A.L.

3/16 X 2-1/2 O.A.L.

TOOL

IDENTIFICATION

MIN

BOREOFFSET

FLAT

WIDTHSHANK

MAX

DEPTH

TR-125-300TR-125-400TR-187-400TR-187-800TR-250-500TR-250-1000TR-312-750TR-312-1250TR-375-750TR-375-1250TR-500-1000TR-500-1500

.060

.300

.400

.400

.800

.5001.000.7501.250.7501.2501.0001.500

.0451/8

.080

.050

3/16

.095

.060

1/4 .095

.0805/16

.130 .1203/8

.160 .1301/2

SERIES 46

1/8 X 2" O.A.L.

MAXDEPTH

OFFSET

MINBORE


FLATWIDTH

45°

THREAD RELIEF TOOLS

2°


46-110046-110546-111046-111546-112046-112546-113046-113546-114046-114546-115046-1155

ORDER

EDP#

TH

RE

AD

T

OO

LS

MULTI-REACH THREADING TOOLS

08-150008-150508-151008-151508-1520

MINIMUM BORE

ORDER EDP#

SHANKDIAMETER

LT-310-4LT-375-4LT-460-6LT-610-6LT-750-6

.310

.375

.460

.610

.750

SHANKLENGTH

4"4"6"6"6"

1/4"5/16"3/8"1/2"5/8"

OFFSET

.060

.060

.080

.100

.120

TOOL I.D.LARGEST PITCH

16161198

SERIES 08 APPLICATION : MULTI-REACH THREADING NO LONGER LIMITED BY NECK LENGTH. ONE TOOL REPLACES A SERIES OF OTHERS.

CARBIDE SHANKS PROVIDE MAXIMUM RIDGIDITY.

ITI CARBIDE: TESTED AND PROVEN TO BE THE BEST

ITI CARBIDE

ALTIN EDP#

08-1500-C08-1505-C08-1510-C08-1515-C08-1520-C

made from

42-300042-300542-301042-301542-302042-302542-303042-303542-304042-304542-305042-305542-306042-306542-307042-307542-308042-308542-309042-3095

.180

.160

.200

.300

.200

.300

.400

.500

.200

.300

.400

.500

.200

.300

.400

.500

.200

.300

.400

.500

.600

.700

60°

MAX DEPTHOFFSET

MINIMUM BORE

.045

.045

QUICK CHANGE THREADING TOOLSSERIES 42

ITI CARBIDE

42-3000-C42-3005-C42-3010-C42-3015-C42-3020-C42-3025-C42-3030-C42-3035-C42-3040-C42-3045-C42-3050-C42-3055-C42-3060-C42-3065-C42-3070-C42-3075-C42-3080-C42-3085-C42-3090-C42-3095-C

made from

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

42-310042-310542-311042-311542-312042-312542-313042-313542-314042-314542-315042-3155

42-3100-C42-3105-C42-3110-C42-3115-C42-3120-C42-3125-C42-3130-C42-3135-C42-3140-C42-3145-C42-3150-C42-3155-C

.080

.140

.120

.100

.060

MINIMUM BORE

.025

.025

.030

.035

.040

OFFSET MAX DEPTH

ORDER EDP#

ALTINCOATED EDP#

MINIMUM BOREE OFFSET

MAX DEPTH

ORDER EDP#

ALTINCOATED EDP#

36

SEE HOLDERS ON PAGE 10

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


METRIC THREADING TOOLS

3/8 X 2-1/2 O.A.L.

5/16 X 2-1/2 O.A.L.

1/4 X 2-1/2 O.A.L.

1/2 X 3" O.A.L.

TOOL

IDENTIFICATION

MIN

BOREOFFSET SHANK

MAX

DEPTH

BU-20-375BU-20-750BU-16-375BU-16-750BU-12-500BU-12-1000BU-10-500BU-10-1000BU-8-750BU-8-1250BU-6-1000BU-6-1250

.050

.060

.070

.080

.090

.120

.375

.750

.375

.750

.5001.000.5001.000.7501.250.7501.250

1/4

3/8

1/2

SERIES 38 BUTTRESS THREADING TOOLS

38-110038-110538-111038-111538-112038-112538-113038-113538-114038-114538-115038-1155

ORDER

EDP#

3/8

5/16

1/2

3/8 X 2-1/2 O.A.L.

1/2 X 3" O.A.L.

THREADSPER INCH

20

16

12

10

8

6

ORDER EDP#

THRED SIZE

OFFSET SHANK MAX _DEPTH MM INCH

SERIES 30

OFFSET

MAXDEPTH


2MM

3MM

4MM

5MM

6MM

8MM

.635 MM

.762 MM

.889 MM

1.27

MM

1.90

MM

2.03

MM

APPLICATION : RIGHT HAND ID THREADING.

60°

30-180030-180530-181030-181530-182030-182530-183030-183530-184030-184530-185030-185530-186030-186530-187030-187530-188030-189030-189530-1900

PITCHRANGE

MINBORE

0.200.70

0.20

0.80

0.20

1.00

0.20

1.40

0.20

2.10

0.20

2.20

4.0 (.157) 8.0 (.315) 4.0 (.157) 8.0 (.315)12.0 (.472) 4.0 (.157) 8.0 (.315)12.0 (.472)10.0 (.394)14.0 (.551)18.0 (.709)25.0 (.985)12.0 (.472)18.0 (.709)25.0 (.985)40.0 (1.576)12.0 (.472)18.0 (.709)25.0 (.985)40.0 (1.576)

5/16 X2-1/2O.A.L.

3/8 X2-1/2O.A.L.

3/8 X2-1/2O.A.L.

1/2 X3"O.A.L.

TH

RE

AD

T

OO

LS

12.0 (.472)18.0 (.709)25.0 (.985)40.0 (1.576)12.0 (.472)18.0 (.709)25.0 (.985)40.0 (1.576)12.0 (.472)18.0 (.709)25.0 (.985)40.0 (1.576)

ORDER EDP#

THRED SIZE

OFFSET SHANK MAX _DEPTH MM INCH

30-190530-191030-191530-192030-192530-193030-193530-194030-194530-195030-195530-1960

10MM

12MM

14MM

16MM

18MM

20MM

22MM

0.20

2.20

0.20

2.50

0.20

3.50

PITCHRANGE

MINBORE

MINBORE

1.52 MM

2.28 MM

3.04 MM

4.20 MM

5.08 MM

7.36 MM

1/4 X2-1/2O.A.L.

1/8 X 2"

1/8 X 2"

1/8 X 2"

3/8 X2-1/2O.A.L.

8.12 MM

9.10 MM

12.5 MM

1.95 MM

2.15 MM

3.01 MM


37

45°

OFFSET

MINBORE

MAXDEPTH

7°


42-5000-C42-5005-C42-5010-C42-5015-C42-5020-C42-5025-C42-5030-C42-5035-C42-5040-C42-5045-C42-5050-C42-5055-C42-5060-C42-5065-C42-5070-C42-5075-C

.080

.140

.120

.100

MINIMUM BORE

MAX DEPTH

ORDER EDP#

.200

.300

.200

.300

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

.005

.005

.007

.007

.040

.040

.050

.050

QUICK CHANGE PROFILE TOOLS

OFFSET TIPRADIUS


ALTINCOATED EDP#

42-500042-500542-501042-501542-502042-502542-503042-503542-504042-504542-505042-505542-506042-506542-507042-5075

made from

42-5080-C42-5085-C42-5090-C42-5095-C42-5100-C42-5105-C42-5110-C42-5115-C42-5120-C42-5125-C42-5130-C42-5135-C

.180

MINIMUM BORE

MAX DEPTH

ORDER EDP#

.160

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

TIP RADIUS

OFFSET

MINIMUM BORE

MAX DEPTH

30°

5°

.007

.007

.060

.080

OFFSET TIPRADIUS

ALTINCOATED EDP#

42-508042-508542-509042-509542-510042-510542-511042-511542-512042-512542-513042-5135

SEE HOLDERS ON PAGE 10


INTERNAL TOOL INC.


60 DEGREE INSERTS FOR .236 BARS

HEAD I.D.ORDER EDP#

ORDER EDP#

SCREWNUMBER

CARBIDESHANK

STEELSHANK

T001 S-6

SHANKLENGTH

6"

INSERT I.C.

3/16 5/32 99-11353"

36-1115

SHANK DIA.

SCREW EDP #

SHANK STYLES

36-1100 36-110536-1110

ORDER EDP#TIN COATED

PITCHRANGE20-48 37-1300

.236 MINIMUM BORE

HEAD I.D. SCREWNUMBER

CARBIDESHANK

STEELSHANK


T002 S-8

SHANKLENGTH

6"1/4 3/16 99-1145 3"

36-1140 36-1145

SHANK DIA.

SHANK STYLES

36-1120 36-112536-1135

.354 MINIMUM BOREHEAD I.D. SCREW

NUMBER

CARBIDESHANK

STEELSHANK


T003 S-8

SHANKLENGTH

6"

INSERT I.C.

5/16 3/163"

36-1170 36-1175

SHANK DIA.

SHANK STYLES

36-1150 36-1155 36-116036-1165

SERIES 36

FULL PROFILE INSERTS FOR .236 BARS

60 DEGREE INSERTS FOR .307 & .354 BARS

PITCH

TIN COATED

.307 MINIMUM BORESERIES 36



PITCH

32 37-13282824

37-1332

20

TIN COATED

18

37-133637-134037-1344

FULL PROFILE INSERTS FOR .307 & .354 BARS

16 37-1348

SERIES 56

INSERT I.C.

ORDER EDP#

36-1130

ORDER EDP#

ORDER EDP#

ORDER EDP#

ORDER EDP#

ORDER EDP#

3/16 I.C.

3/16 I.C.

NO-RADIUS

RADIUS

RADIUS

NO-RADIUS

3228242018

37-130437-130837-131237-131637-1320

INDEXABLE INSERT THREADING BARS

ITI CARBIDE: SIMPLY UN-COMPARABLE

SCREW EDP #

SCREW EDP #

99-1145

38

TH

RE

AD

T

OO

LS

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


HEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP#SCREWNUMBER

CARBIDESHANK

STEELSHANK


T004 S-11

SHANKLENGTH

6"

INSERT I.C.

3/8 1/43"

36-1235 36-1240

SHANK DIA.

SHANK STYLES

36-1215 36-1220 36-122536-1230

.625 MINIMUM BOREHEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP#

CARBIDESHANK

STEELSHANK


T005 S-11

SHANKLENGTH

6"

INSERT I.C.

1/2 1/43"

36-1265 36-1270

SHANK DIA.

SHANK STYLES

36-1245 36-1250 36-125536-1260

60 DEGREE INSERTS FOR .390, .470 & .625 BARS

.470 MINIMUM BORE



PITCH

TIN COATED

ORDER EDP#UN-COATED C-2

FULL PROFILE INSERTS FOR .390, .470 & .625 BARS

PIPE THREAD INSERTS FOR .390, .470 & .625 BARS

PITCH

27

C-2 UNCOATED

37-1402 37-1404

TIN COATED

18 37-1406 37-1408


CARBIDESHANK

STEELSHANK


T003.5 S-11

SHANKLENGTH

6"

INSERT I.C.

5/16 1/4 99-1150 3"36-1205 36-1210

SHANK DIA.

SCREW EDP #

SHANK STYLES

36-1180 36-1185 36-119036-1200


NO-RADIUS

RADIUS

RADIUS

SERIES 36

SERIES 36

3632282420181614131211

37-137037-137437-137837-138237-138337-138637-139013-139437-139837-140137-1405

37-137237-137637-138037-138437-138537-138837-139237-139637-140037-140337-1407



SCREW EDP #

SCREW EDP #

99-1150

SCREWNUMBER

99-1150

TH

RE

AD

T

OO

LS

39

INTERNAL TOOL INC.



CARBIDESHANK

STEELSHANK


T007 S-16

SHANKLENGTH

6"

INSERT I.C.

5/8 3/8 99-11603"

36-1340 36-1345

SHANK DIA.

SHANK STYLES

36-1320 36-132536-1335

1" MINIMUM BOREHEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP#

CARBIDESHANK

STEELSHANK


T008 S-16

SHANKLENGTH

6"

INSERT I.C.

3/4 3/83"

36-1385 36-1390

SHANK DIA.

SCREW EDP #

SHANK STYLES

36-1365 36-137036-1380

60 DEGREE INSERTS FOR .640 .750 & 1" BARS

.750 MINIMUM BORE


PITCHRANGE

C-2 UNCOATED

PITCH

TIN COATED

ORDER EDP#UN-COATED C-2

FULL PROFILE INSERTS FOR .640 .750 & 1" BARS


9" 36-1350 36-1355

36-1330

36-1360

9" 36-1395 36-1400 36-1405

36-1375


CARBIDESHANK

STEELSHANK


T006 S-16-S

SHANKLENGTH

6"

INSERT I.C.

1/2 3/8 99-11553"

36-1295 36-1300

SHANK DIA.

SHANK STYLES

36-1275 36-128036-1290


9" 36-1305 36-1310

36-1285

36-1315

PITCH C-2 UNCOATED TIN COATED

PIPE THREAD INSERTS FOR .640 .750 & 1" BARS

NO-RADIUS

RADIUS

RADIUS

SERIES 36

SERIES 36

16-488-488-14

37-141037-141437-1415

37-141237-141637-1417

363228242018161412108

37-141837-142237-142637-143037-143437-143837-144237-144637-145037-145437-1458

37-142037-142437-142837-143237-143637-144037-144437-144837-145237-145637-1460

27181411-1/28

37-146237-146637-147037-147437-1478

37-146437-146837-147237-147637-1480


SCREW EDP #

SCREW EDP #

SCREWNUMBER

99-1160

TH

RE

AD

T

OO

LS

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


ORDER

EDP#O.A.L.

SHANK

DIA.

LENGTH

OF CUT

A7-312-B

A7-313-B

A7-375-B

A7-500-B

A7-625-B

A7-750-B

A7-875-B

A7-1000-B

5/16

5/16

3/8

1/2

5/8

3/4

7/8

1"

1/85/323/161/45/163/87/161/2

SERIES 60

TIP

RADIUS

.032

.040

.046

.062

.078

.093

.109

.125

2"

2"

2-1/2"

2-1/2"

2-1/2"

2-1/2"

2-1/2"

3"

SPECIAL SIZES AVAILABLE ON REQUEST

DIE SINKERS

14' INCLUDED ANGLE

LENGTHOF CUT

TIPRADIUS

SHANK DIA.

RUNNER CUTTERS

60-1400

60-1405

60-1410

60-1415

60-1420

60-1425

60-1430

60-1435

ORDER

EDP#

TOOL

IDENTIFICATIONO.A.L.

SHANK

DIA.

LENGTH

OF CUT

RU-125-3RU-125-5RU-125-10RU-187-3RU-187-5RU-187-10RU-250-3RU-250-5RU-250-10RU-312-3RU-312-5RU-312-10RU-375-3RU-375-5RU-375-10RU-500-3RU-500-5RU-500-10

.590

.370

.175

.750

.620

.3101.000.890.4421.1001.060.5301.3751.240.6103.0622.310.850

.125

.187

.250

.312

.375

.500

TIP

RADIUS

.031

.039

.047

.062

.078

.094

2"

2-1/2"

2-1/2"

2-1/2"

3"

4"

61-120061-125061-130061-135061-140061-145061-150061-155061-160061-165061-170061-175061-180061-185061-190061-195061-200061-2050


SERIES 61

TAPER

PER SIDE

3°5°10°3°5°10°3°5°10°3°5°10°3°5°10°3°5°10°

APPLICATION : FOR MACHINING TAPERS OR RELIEFS.

APPLICATION : FOR DIE SINKING OR RELIEF WORK.

TOOL

IDENTIFICATION

ITI CARBIDE

ITI CARBIDE

COUNTERSINKS & MOLD CUTTING TOOLS

60°


63-300063-500063-600063-310063-510063-610063-320063-520063-6200

82°

90°

.250

.375

.500

.250

.375

.500

.250

.375

.500

2-1/2"2-1/2"3"2-1/2"2-1/2"3"2-1/2"2-1/2"3"

CARBIDE COUNTERSINKSORDER

EDP #

SHANK

DIAO.A.L.

INCLUDED

ANGLE

APPLICATION : FOR COUNTER SINKING HOLES

6 FLUTE DOUBLE ENDCHATTER FREE STYLE

made from

made from

made from


INTERNAL TOOL INC.


ORDER

EDP#OFFSET

TIP

RADIUS

MAX

DEPTH

.080.180

.080

.110

.130

.160

.010

.220 .010

.300 .015

.360 .015

.490 .015

SERIES 56

ORDER

EDP#

MIN

BOREOFFSET

TIP

RADIUS

MAX

DEPTH

.080.180

.080

.110

.130

.160

.010

.220 .010

.300 .015

.360 .015

.490 .015

SERIES 56

PROFILE TOOLS

3/8 X 2-1/2

5/16 X 2-1/2

1/4 X 2-1/2

1/2 X 3"

3/16 X 2-1/2

3/8 X 2-1/2

5/16 X 2-1/2

1/4 X 2-1/2

1/2 X 3"

3/16 X 2-1/2



MINBORE

OFFSET

30° MAXDEPTH

MAXDEPTH

OFFSET

MINBORE

30°

5°

REVERSE PROFILE TOOLS

PROFILE TOOLS

RADIUS

RADIUS

.007.120

.040

APPLICATION : REVERSE PROFILING TOOL

MIN

BORE

56-100056-100556-101056-108056-108556-109056-110056-110556-111056-111556-112056-112556-113056-113556-114056-114556-115056-115556-116056-116556-117056-117556-1180

.200

.300

.400

.250

.500

.750

.500

.7501.000.500.7501.000.500.7501.000.500.7501.0001.250.500.7501.0001.250

.500

.7501.000.500.7501.000.500.7501.000.500.7501.0001.250.500.7501.0001.250

56-150056-150556-151056-151556-152056-152556-153056-153556-154056-154556-155056-155556-156056-156556-157056-157556-1580

ITC CARBIDE

ITC CARBIDE

MULTI-REACH PROFILE TOOLS

09-140009-140509-141009-141509-1420

.360

.420

.480

.615

.750

4"4"6"6"6"

1/4"5/16"3/8"1/2"5/8"

.100

.100

.100

.110

.125

SERIES 09 ITC CARBIDE

CARBIDE SHANKS PROVIDE MAXIMUM RIDGIDITY

MIN

BOREORDER

EDP#OFFSET

SHANK

DIAMETER

SHANK

LENGTHRADIUS

.010

.015

.015

.015

.020

APPLICATION : STANDARD PROFILING TOOL

APPLICATION : MULTI-REACH PROFILING NO LONGER LIMITED BY NECK LENGTH. ONE TOOL REPLACES A SERIES OF OTHERS.


ALTINCOATED EDP#

56-1000-C56-1005-C56-1010-C56-1080-C56-1085-C56-1090-C56-1100-C56-1105-C56-1110-C56-1115-C56-1120-C56-1125-C56-1130-C56-1135-C56-1140-C56-1145-C56-1150-C56-1155-C56-1160-C56-1165-C56-1170-C56-1175-C56-1180-C

ALTINCOATED EDP#

56-1500-C56-1505-C56-1510-C56-1515-C56-1520-C56-1525-C56-1530-C56-1535-C56-1540-C56-1545-C56-1550-C56-1555-C56-1560-C56-1565-C56-1570-C56-1575-C56-1580-C

ALTIN

COATED

EDP#

09-1400-C09-1405-C09-1410-C09-1415-C09-1420-C

.090

.080

.005

1/8 X 2"

made from

made from

1/8 X 2"

made from



CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


R.H. OFFSET PROFILE TOOLS

FINE POINT PROFILE TOOLS

SERIES 56

ORDER

EDP#

TOOL

IDENTIFICATION

MIN

BOREOFFSETRADIUS

MAX

DEPTH

.020

.020

.020

.020

FIP-220-500FIP-220-750FIP-220-1000FIP-300-750FIP-300-1000FIP-360-750FIP-360-1000FIP-360-1250FIP-490-1000FIP-490-1250FIP-490-1500

.500

.7501.000.7501.000.7501.0001.2501.0001.2501.500

.220 .010

.300 .015

.360 .015

.490 .015

SERIES 56

3/8 X 2-1/2

5/16 X 2-1/2

1/4 X 2-1/2

1/2 X 3"

OFFSET & FINE POINT PROFILE TOOLS

APPLICATION : FINE POINT PROFILING TOOL.

APPLICATION : LEFT HAND OFFSET PROFILING TOOL.

SERIES 56

ORDER

EDP#

MIN

BOREOFFSETRADIUS

.080

.110

.130

.160

.220 .010

.300 .015

.360 .015

.490 .015

SERIES 56

3/8 X 2-1/2 O.A.L.

5/16 X 2-1/2 O.A.L.

1/4 X 2-1/2O.A.L.

1/2 X 3" O.A.L.

L.H. OFFSET PROFILE TOOLS

ORDER

EDP#

TOOL

IDENTIFICATION MIN

BOREOFFSETRADIUS

MAX

DEPTH

.080

.110

.130

.160

.220 .010

.300 .015

.360 .015

.490 .015

3/8 X 2-1/2 O.A.L.

5/16 X 2-1/2 O.A.L.

1/4 X 2-1/2O.A.L.

1/2 X 3"O.A.L.

APPLICATION : RIGHT HAND OFFSET PROFILING TOOL.

INSIDE PROFILING

OUTSIDE PROFILING

MAX DEPTH OFFSET

RADIUS

MINBORE

30° 57°

MINBORE

MAX DEPTH

OFFSET

57°

30°

MAX DEPTH

MINBORE

23°

2°

56-131556-132056-132556-133056-133556-134056-134556-135056-136056-136556-1370

56-191556-192056-192556-193056-193556-194056-194556-195056-195556-196056-196556-197056-197556-1980

LOP-220-500LOP-220-750LOP-220-1000LOP-300-500LOP-300-750LOP-300-1000LOP-360-500LOP-360-750LOP-360-1000LOP-360-1250LOP-490-500LOP-490-750LOP-490-1000LOP-490-1250

.500

.7501.000.500.7501.000.500.7501.0001.250.500.7501.0001.250

56-181556-182056-182556-183056-183556-184056-184556-185056-185556-186056-186556-187056-187556-1880

ROP-220-500ROP-220-750ROP-220-1000ROP-300-500ROP-300-750ROP-300-1000ROP-360-500ROP-360-750ROP-360-1000ROP-360-1250ROP-490-500ROP-490-750ROP-490-1000ROP-490-1250

MAX

DEPTH

.500

.7501.000.500.7501.000.500.7501.0001.250.500.7501.0001.250

TOOL

IDENTIFICATION

ITC CARBIDE

ITC CARBIDE

ITC CARBIDE

ITC CARBIDE: SPECIALLY BLENDED FOR OPTIMUM PERFORMANCE

made from

made from

made from




INTERNAL TOOL INC.


DRILL-MILLS

APPLICATION : DRILL & MILL WITH ONE TOOL.


SHANK DIAMETER

INCLUDED ANGLE

LENGTH OF CUT

CENTER CUTTING30° RIGHT HAND HELIXRIGHT HAND CUT

.125

.187

.218

.250

.281

.312

.343

.375

.406

.437

.468

.500

5/8

3/4

3/4

1"

1"

1”

1"

1"

1”

1”

1”

1”

2"

2-1/2

2-1/2

3"

3"

3"

3"

3"

3”

3”

3”

3”

1/8

3/16

1/4

1/4

5/16

5/16

3/8

3/8

7/16

7/16

1/2

1/2

SHANKDIAMETER

LENGTH OF CUT

OVERALL LENGTH

SIZE

49-1000

49-1050

49-1100

49-1150

49-1200

49-1250

49-1300

49-1350

49-1400

49-1450

49-1500

49-1550

120° INCLUDED ANGLE

.125

.187

.218

.250

.281

.312

.343

.375

.406

.437

.468

.500

5/8

3/4

3/4

1"

1"

1”

1"

1"

1”

1”

1”

1”

2"

2-1/2

2-1/2

3"

3"

3"

3"

3"

3”

3”

3”

3”

1/8

3/16

1/4

1/4

5/16

5/16

3/8

3/8

7/16

7/16

1/2

1/2

SHANKDIAMETER

LENGTH OF CUT

OVERALL LENGTH

SIZE

49-1010

49-1060

49-1110

49-1160

49-1210

49-1260

49-1310

49-1360

49-1410

49-1460

49-1510

49-1560

90° INCLUDED ANGLE

.125

.187

.218

.250

.281

.312

.343

.375

.406

.437

.468

.500

5/8

3/4

3/4

1"

1"

1”

1"

1"

1”

1”

1”

1”

2"

2-1/2

2-1/2

3"

3"

3"

3"

3"

3”

3”

3”

3”

1/8

3/16

1/4

1/4

5/16

5/16

3/8

3/8

7/16

7/16

1/2

1/2

SHANKDIAMETER

LENGTH OF CUT

OVERALL LENGTH

SIZE

49-1005

49-1055

49-1105

49-1155

49-1205

49-1255

49-1305

49-1355

49-1405

49-1455

49-1505

49-1555

82° INCLUDED ANGLE

.125

.187

.218

.250

.281

.312

.343

.375

.406

.437

.468

.500

5/8

3/4

3/4

1"

1"

1”

1"

1"

1”

1”

1”

1”

2"

2-1/2

2-1/2

3"

3"

3"

3"

3"

3”

3”

3”

3”

1/8

3/16

1/4

1/4

5/16

5/16

3/8

3/8

7/16

7/16

1/2

1/2

SHANKDIAMETER

LENGTH OF CUT

OVERALL LENGTH

4 FLUTE EDP # SIZE

49-1015

49-1065

49-1115

49-1165

49-1215

49-1265

49-1315

49-1365

49-1415

49-1465

49-1515

49-1565

60° INCLUDED ANGLE

DRILL-MILLS

44

49-2015

49-2065

49-2115

49-2165

49-2215

49-2265

49-2315

49-2365

49-2415

49-2465

49-2515

49-2565

49-2010

49-2060

49-2110

49-2160

49-2210

49-2260

49-2310

49-2360

49-2410

49-2460

49-2510

49-2560

49-2000

49-2050

49-2100

49-2150

49-2200

49-2250

49-2300

49-2350

49-2400

49-2450

49-2500

49-2550

49-2005

49-2055

49-2105

49-2155

49-2205

49-2255

49-2305

49-2355

49-2405

49-2455

49-2505

49-2555

4 FLUTE EDP #

4 FLUTE EDP #

4 FLUTE EDP #

2 FLUTE EDP #

2 FLUTE EDP #

2 FLUTE EDP #

2 FLUTE EDP #

ITC CARBIDE: THE MOST VERSATILE CARBIDE AVAILABLE

NOW AVAILABLE IN 2 AND 4 FLUTE

made from

also available with altin coating simply add - C after the tool number when ordering

also available with altin coating simply add - C after the tool number when ordering

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


ORDER

EDP#

SERIES 71

SIZEOVERALL

LENGTH

ORDER

EDP#

TOOL

IDOVERALL

LENGTH

SHANK

DIA.

DRILL

DIAMETER

.125

.187

.187

.250

.250

.312

.312

.375

.375

.437

.437

.500

.500

SERIES 58

FLUTE

LENGTH

FOR DRILLING SHALLOW DEPTHHOLES IN HARD MATERIALS SPADE DRILLS

FLUTELENGTH

APPLICATION :

118° POINT

APPLICATION : DRILLING CENTERS IN JUSTABOUT ANY MATERIAL.

.125 (1/8)

.156 (5/32)

.187 (3/16)

.218 (7/32)

.250 (1/4)

.281 (9/32)

.312 (5/16)

.343 (11/32)

.375 (3/8)

.406 (13/32)

.437 (7/16)

.468 (15/32)

.500 (1/2)

58-110858-111058-111258-111458-111658-111858-112058-112258-112458-112658-112858-113058-1132

1-1/22"2"2"2"2-1/2"2-1/2"2-1/2"2-1/2"3"3"3"3"

SD-125SD-156SD-187SD-218SD-250SD-281SD-312SD-343SD-375SD-406SD-437SD-468SD-500

1/29/1611/1611/1613/167/87/815/161-1/81-1/81-1/81-3/161-3/16

#0#1#2#3#4#5#6

71-100571-101071-101571-102071-102571-103071-1035

1/81/83/161/45/167/161/2

ITC CARBIDE

MAJOR

DIAMETER

PILOT

DIAMETER

PILOT

LENGTH

1/32 (.031)

3/64 (.046)

5/64 (.078)

7/64 (.109)

1/8 (.125)

3/16 (.187)

7/32 (.218)

1/32 (.031)

3/64 (.046)

5/64 (.078)

7/64 (.109)

1/8 (.125)

3/16 (.187)

7/32 (.218)

2"2"2-1/2"2-1/2"2-1/2"3"3"

CARBIDE CENTER DRILLS

ITC CARBIDE

OVERALL LENGTH

SHANK DIAMETER

PILOT DIAMETER

PILOT LENGTH

60° INCLUDED ANGLE

DRILLS: SPADE, CENTER, SPOTTING


SPOTTING DRILLS

75-1000

75-1005

75-1010

75-1015

75-1020

75-1025

75-1030

75-1035

.250

.312

.375

.500

.562

.687

.812

.937

UP TO #2 SCREW

UP TO #6 SCREW

UP TO #8 SCREW

UP TO #10 SCREW

UP TO 1/4" SCREW

UP TO 5/16" SCREW

UP TO 3/8" SCREW

UP TO 1/2" SCREW

1/4

5/16

3/8

1/2

1/2

1/2

1/2

1/2

SHANKDIAMETER

EDPNUMBER SIZE

SPD-250-82

SPD-312-82

SPD-375-82

SPD-500-82

SPD-562-82

SPD-687-82

SPD-812-82

SPD-937-82

82° INCLUDED ANGLE

TOOL ID #

75-2000

75-2005

75-2010

75-2015

75-2020

75-2025

.125

.187

.250

.312

.375

.500

1/8

3/16

1/4

5/16

3/8

1/2

SHANKDIAMETER

EDPNUMBER SIZE

SPD-125-90

SPD-187-90

SPD-250-90

SPD-312-90

SPD-375-90

SPD-500-90

90° INCLUDED ANGLETOOL ID #

75-3000

75-3005

75-3010

75-3015

75-3020

75-3025

.125

.187

.250

.312

.375

.500

1/8

3/16

1/4

5/16

3/8

1/2

SHANKDIAMETER

EDPNUMBER SIZE

SPD-125-120

SPD-187-120

SPD-250-120

SPD-312-120

SPD-375-120

SPD-500-120

TOOL ID #

120° INCLUDED ANGLE

APPLICATION : CNC SPOT DRILLINGFASTER THAN CENTER DRILLINGCAN BE USED AS A COUNTERINK


SCREW SIZE

FOR FLAT HEAD SCREWS

made from

made from

made from

INTERNAL TOOL INC.

ITI Carbide Cutting Tools46 THE LEADER IN INNOVATION

ORDER

EDP#

ST-1

ST-2

ST-3

ST-4

ST-5

ST-6

ST-7

ST-8

ST-9

ST-10

ST-11

SERIES 69

1°

2°

3°

4°

5°

6°

7°

8°

9°

10°

11°

SMALL CARBIDE STUB TAPERS

ANGLE PER SIDE

LENGTHOF CUT IS 1/2"

TIP DIA'S .062 +.000 / -.003

SHANK DIA. IS 1/4"

69-1000

69-1020

69-1030

69-1040

69-1050

69-1060

69-1070

69-1080

69-1090

69-1100

69-1105

APPLICATION : FOR MILLING TAPERS OR TAPERED REAMING

TOOL

IDENTIFICATION

ITI CARBIDE

ANGLE

PER SIDE

OVERAL LENGTH IS 2.5"

3 FLUTE WITH 15° HELIX

made from

SHANK AND

O.A.L.

1°

1-1/2°

2°

3°

4°

5°

7°

10°

15°

30°

45°

69-2000

69-2020

69-2030

69-2040

69-2050

69-2060

69-2070

69-2080

69-2090

69-3000

69-3010

69-3020

69-3030

69-3040

69-3050

69-3060

69-3070

69-3080

69-3090

69-4000

69-4010

69-4020

69-4030

69-4040

69-4050

69-4060

69-4070

69-4080

69-4090

69-5000

69-5010

ANGLE

PER SIDE

SERIES 69

STANDARD TAPERED CARBIDE ENDMILLS TIP

DIAMETER LENGTH

OF CUT

ORDER

EDP#

.094

.125

.250

.094

.125

.250

.094

.125

.250

.094

.125

.250

.094

.125

.250

.094

.125

.250

.094

.125

.250

.094

.125

.250

.094

.125

.250

.094

.125

.250

.125

.750

1.000

1.250

.750

1.000

1.250

.750

1.000

1.250

1.000

1.000

1.250

1.000

1.000

1.250

.750

1.250

1.250

.750

1.000

1.000

.750

1.000

1.250

.250

.500

1.000

.250

.250

1.000

.500

1/4 X 2.5

1/4 X 3.0

3/8 X 3.5

1/4 X 2.5

1/4 X 3.0

3/8 X 3.5

1/4 X 2.5

1/4 X 3.0

3/8 X 3.5

1/4 X 3.0

1/4 X 3.0

3/8 X 3.5

1/4 X 3.0

3/8 X 3.0

1/2 X 3.5

1/4 X 3.0

3/8 X 3.5

1/2 X 3.5

1/4 X 3.0

3/8 X 3.0

1/2 X 3.5

3/8 X 2.5

1/2 X 3.5

3/4 X 4.0

1/4 X 2.5

3/8 X 2.5

1/2 X 3.5

3/8 X 2.5

1/2 X 3.0

3/4 X 4.0

3/4X 3-3/4

ALTINCOATED EDP#

69-2000-C

69-2020-C

69-2030-C

69-2040-C

69-2050-C

69-2060-C

69-2070-C

69-2080-C

69-2090-C

69-3000-C

69-3010-C

69-3020-C

69-3030-C

69-3040-C

69-3050-C

69-3060-C

69-3070-C

69-3080-C

69-3090-C

69-4000-C

69-4010-C

69-4020-C

69-4030-C

69-4040-C

69-4050-C

69-4060-C

69-4070-C

69-4080-C

69-4090-C

69-5000-C

69-5010-CTIP DIAMETER

LENGTH OF CUT

ANGLE

PER SIDE

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


ORDER

EDP#

SHANK

DIA.

SERIES 45

MAJOR

DIAMETERO.A.L.

2-1/2" 1/4

BACK-DRAFT ENDMILLS

45-110045-110545-111045-111545-112045-112545-113045-113545-114045-114545-115045-1155

ITI CARBIDE

3/16

BACK-DRAFT CUTTERSREVERSE TAPERED ENDMILLS


FLUTE

LENGTH


BACK-DRAFT RADIUS CUTTERSREVERSE TAPERED ENDMILLS WITH A CORNER RADIUS

REACH

LENGTH

3/8

1/2

2-1/2"

2-1/2"

3"

ORDER

EDP#

SHANK

DIA.

MAJOR

DIAMETERO.A.L.

2-1/2" 1/4

3/16

FLUTE

LENGTH

REACH

LENGTH

3/8

1/2

2-1/2"

2-1/2"

3"

RADIUS

SIZE

45-310045-310545-311045-311545-312045-312545-313045-313545-314045-314545-315045-315545-316045-316545-317045-317545-318045-318545-319045-319545-320045-320545-321045-321545-322045-322545-323045-323545-324045-324545-325045-325545-3260

1/321/321/321/161/161/161/321/321/321/161/161/161/321/321/321/161/161/163/323/323/321/321/321/321/161/161/163/323/323/32 1/8 1/8

1/8

47

made from

made from

1/4 3/16

1/2 3/4 1" 1/2 3/4 1" 5/8 3/4 1" 5/8 3/4 1" 3/4 1"1-1/4 3/4 1"1-1/4 3/4 1"1-1/4 3/4 1"1-1/4" 3/4 1"1-1/4" 3/4 1"1-1/4" 3/4 1"1-1/4"

3/8

1/2

5/8

1/4

3/8

1/2

1/2 3/4 1" 5/8 3/4 1" 5/8 3/4 1" 5/8 3/4 1"

1/4

3/8

1/2

5/8

3/16

1/4

3/8

1/2

FLUTE

LENGTH

REACH

LENGTH

NECK DIAMETER

SHANK DIAMETER

MAJOR DIAMETER

ANGLE PER SIDE

2°

NECK

DIAMETER

.320

15° HELICAL FLUTE

SHANK DIAMETER

NECK DIAMETER

15° HELICAL FLUTE

FLUTE

LENGTH

REACH

LENGTH

RADIUS

ANGLE PER SIDE

2°

NECK

DIA.

.320

USE THESE TO GET THE

RIGHT POCKET RADIUS

WITHOUT DAMAGING THE

POCKET WALL

.210

.210

.156

.156

.425

.425



MAJOR DIA.

INTERNAL TOOL INC.


2 & 4 FLUTE SQUARE LENGTH OF CUT

2 FLUTE EDP #

SIZE

21-700021-700521-701021-701521-702021-702521-703021-703521-704021-704521-705021-705521-706021-706521-707021-707521-708021-708521-709021-709521-710021-710521-711021-711521-712021-712521-713021-713521-714021-714521-715021-715521-716021-716521-717021-717521-718021-718521-719021-719521-720021-720521-721021-721521-722021-7225

.015

.018

.021

.024

.027

.030

.033

.036

.039

.042

.045

.048

.051

.054

.057

.060

.063

.066

.069

.072

.075

.078

.081

.084

.087

.090

.093

.105

.120

.135

.141

.150

.165

.180

.195

.210

.225

.240

.255

.270

.300

.315

.330

.345

.360

.375

.010

.015

.020

.025

.030

.031

.035

.040

.045

.047

.050

.055

.060

.065

.070

.075

.080

.085

.090

.095

.100

.120

LENGTH OF CUT

SIZE

21-600021-600521-601021-601521-602021-602521-603021-603521-604021-604521-605021-605521-606021-606521-607021-607521-608021-608521-609021-609521-610021-6105

.030

.045

.060

.075

.090

.093

.105

.120

.135

.141

.150

.165

.180

.195

.210

.225

.240

.255

.270

.285

.300

.360

.005

.006

.007

.008

.009

.010

.011

.012

.013

.014

.015

.016

.017

.018

.019

.020

.021

.022

.023

.024

.025

.026

.027

.028

.029

.030

.031

.035

.040

.045

.047

.050

.055

.060

.065

.070

.075

.080

.085

.090

.100

.105

.110

.115

.120

.125

2 & 4 FLUTE BALL

41-700041-700541-701041-701541-702041-702541-703041-703541-704041-704541-705041-705541-706041-706541-707041-707541-708041-708541-709041-709541-710041-710541-711041-711541-712041-712541-713041-713541-714041-714541-715041-715541-716041-716541-717041-717541-718041-718541-719041-719541-720041-720541-721041-721541-722041-7225

-- -- -- --41-601041-601541-602041-602541-603041-603541-604041-604541-605041-605541-606041-606541-607041-607541-608041-608541-609041-609541-610041-6105

4 FLUTE EDP #

2 FLUTE EDP #

4 FLUTE EDP #

SERIES 21 TWO FLUTE

SERIES 41 FOUR FLUTE

48

CENTER CUTTING30° RIGHT HAND HELIX, RIGHT HAND CUT

ITC CARBIDE

ITC CARBIDE

ITC CARBIDE: HIGH TRANSVERSE RUPTURE STRENGTH

MICRO ENDMILLS

made from

made from

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


41-062141-078141-094141-094241-094341-094441-098141-109141-109241-118141-125141-125241-125341-125441-125541-141141-141241-156141-156241-158141-172141-172241-187141-187241-187341-187441-187541-197141-203141-203241-218141-218241-234141-234241-236141-250141-250241-250341-250441-250541-250641-266141-266241-276141-281141-281241-297141-297241-312141-312241-312341-312441-312541-3126

1/81/81/81/81/81/81/81/81/81/81/81/81/81/81/8

3/163/163/163/163/163/163/163/163/163/163/163/161/41/41/41/41/41/41/41/41/41/41/41/41/41/4

5/165/165/165/165/165/165/165/165/165/165/165/165/16

1-1/2”1-1/2”1-1/2”1-1/2”2”2-1/2”2”2”2”2”2”2”2”2-1/2”3”2”2-1/2”2”2-1/2”2”2”2-1/2”2”2”2-1/2”2-1/2”3”2”2”2-1/2”2”2-1/2”2”2-1/2”2”2”2-1/2”3”3”4”4”2”2-1/2”2-1/2”2”2-1/2”2”2-1/2”2”2-1/2”3”3”4”4”

.200

.280

.190

.380

.500

.750

.250

.250

.500

.400

.250

.380

.500

.7501.000.380.750.380.650.380.380.650.380.650.7501.0001.300.500.400.800.400.800.400.800.500.500.8001.0001.3001.5001.800.5001.000.650.500.800.500.800.500.7501.0001.2501.5001.800

8 mm

21/64

11/329 mm23/64

3/8

25/64

10 mm

13/32

27/6411 mm

7/16

29/64

15/32

12 mm

31/64

1/2

.500

.750

.500

.750

.500

.750

.500

.500

.750

.500

.7501.0001.2501.5001.7502.000.7501.000.7501.000.7501.000.7501.000.750.7501.0001.800.7501.250.7501.250.7501.250.7501.250.7501.0001.2501.5001.7502.0003.0004.000

.315

.328

.344

.354

.359

.375

.391

.394

.406

.422

.433

.437

.453

.469

.472

.484

.500

.062

.078

.094

.098

.109

.118

.125

.141

.156

.158

.172

.187

.197

.203

.218

.234

.236

.250

.266

.276

.281

.297

.312

1/165/64

3/32

2.5mm7/643mm

1/8

9/64

5/324mm11/64

3 /16

5mm13/64

7/32

15/646mm

1/4

17/647mm9/32

19/64

5/16

A GREAT QUALITY ENDMILL FOR A GOOD PRICE

THE RIGHT LENGTH OF CUT FOR ANY JOB

SIZE +.000/-.002

EDPNUMBER

OVERALLLENGTH

SHANK DIA.

SERIES 41 4 FLUTE

CARBIDE ENDMILLS STANDARD SIZES AS WELL AS UNUSUAL LENGTHS AND DIAMETERS

41-315141-315241-328141-328241-344141-344241-354141-359141-359241-375141-375241-375341-375441-375541-375641-375741-391141-391241-394141-394241-406141-406241-422141-422241-433141-437141-437241-437341-453141-453241-469141-469241-472141-472241-484141-484241-500141-500241-500341-500441-500541-500641-500741-5008

2”2-1/2”2”2-1/2”2”2-1/2”2”2”2-1/2”2”2-1/23”3”4”4”4”2-1/2”3”2-1/2”3”2-1/2”3”2-1/2”3”2-1/2”2-1/23”4”2-1/2”3”2-1/2”3”2-1/2”3”2-1/2”3”2-1/2”3”3”4”4”4”6”6

LENGTHOF CUT

SIZE +.000/-.002

CENTER CUTTING30° RIGHT HAND HELIX, RIGHT HAND CUT

49

ITC CARBIDE


SOLID CARBIDE ENDMILLS

41-0621-C41-0781-C41-0941-C41-0942-C41-0943-C41-0944-C41-0981-C41-1091-C41-1092-C41-1181-C41-1251-C41-1252-C41-1253-C41-1254-C41-1255-C41-1411-C41-1412-C41-1561-C41-1562-C41-1581-C41-1721-C41-1722-C41-1871-C41-1872-C41-1873-C41-1874-C41-1875-C41-1971-C41-2031-C41-2032-C41-2181-C41-2182-C41-2341-C41-2342-C41-2361-C41-2501-C41-2502-C41-2503-C41-2504-C41-2505-C41-2506-C41-2661-C41-2662-C41-2761-C41-2811-C41-2812-C41-2971-C41-2972-C41-3121-C41-3122-C41-3123-C41-3124-C41-3125-C41-3126-C

ALTIN COATEDEDP NUMBER

SHANK DIA.

OVERALLLENGTH

LENGTHOF CUT

ALTIN COATEDEDP NUMBER

EDPNUMBER

3/83/83/83/83/83/83/83/83/83/83/83/83/83/83/83/8

7/167/167/167/167/167/167/167/167/167/167/167/161/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/2

41-3151-C41-3152-C41-3281-C41-3282-C41-3441-C41-3442-C41-3541-C41-3591-C41-3592-C41-3751-C41-3752-C41-3753-C41-3754-C41-3755-C41-3756-C41-3757-C41-3911-C41-3912-C41-3941-C41-3942-C41-4061-C41-4062-C41-4221-C41-4222-C41-4331-C41-4371-C41-4372-C41-4373-C41-4531-C41-4532-C41-4691-C41-4692-C41-4721-C41-4722-C41-4841-C41-4842-C41-5001-C41-5002-C41-5003-C41-5004-C41-5005-C41-5006-C41-5007-C41-5008-C

made from

INTERNAL TOOL INC.


EN

GR

AV

ING

T

OO

LS

50

ENGRAVING TOOLS

ORDER

EDP#O.A.L.

SHANK

DIA.

TIPINCLUDED ANGLE

SERIES 62

1/8 2"

3/16 2-1/2

1/4 2-1/2

ORDER

EDP#O.A.L.

SHANK

DIA.

TIPINCLUDED ANGLE

62-1200

62-1205

62-1210

40°

60°

90°

2"

FINE POINTENGRAVING TOOLSTIP DIA APROX .002 SLOWER CUTTINGFOR VERY FINE CUTS

ORDER

EDP#O.A.L.

SHANK

DIA.

TIPINCLUDED ANGLE

TIP DIA APROX .015GROUND WITH INCREASED CLEARANCEFOR CUTTING ALUM, BRASS, PLASTIC ETC.

STANDARD POINT DOUBLE TOOL LIFETIP DIA APROX .015 FASTER FREE CUTTING

ORDER

EDP# O.A.L.SHANK

DIA.

TIPINCLUDED ANGLE

62-1400

62-1402

62-1405

62-1410

62-1415

62-1417

62-1420

62-1425

62-1430

62-1435

62-1437

62-1440

62-1445

62-1450

62-1455

30°

40°

60°

90°

120°

30°

40°

60°

90°

120°

30°

40°

60°

90°

120°

2"

62-1500

62-1505

62-1510

62-1520

62-1525

62-1530

62-1540

62-1545

62-1550

40°

60°

90°

40°

60°

90°

40°

60°

90°

2"

3/16

DOUBLE ENDENGRAVING TOOLS

EXTRA LONGENGRAVING TOOLS

ORDER

EDP# O.A.L.SHANK

DIA.

TIPINCLUDED ANGLE

62-1800

62-1805

62-1810

62-1815

62-1820

62-1825

62-1830

62-1835

62-1840

62-1845

62-1850

62-1855

40°

60°

90°

120°

40°

60°

90°

120°

40°

60°

90°

120°

30°

40°

60°

90°

120°

30°

40°

60°

90°

120°

30°

40°

60°

90°

120°

30°

40°

60°

90°

120°

30°

40°

60°

90°

120°

30°

40°

60°

90°

120°

STANDARD POINTTIP DIA APROX .015 FASTER FREE CUTTING

62-1095

62-1100

62-1105

62-1110

62-1115

62-1117

62-1120

62-1125

62-1130

62-1135

62-1137

62-1140

62-1145

62-1150

62-1155

62-1157

62-1160

62-1162

62-1165

62-1167

62-1170

62-1172

62-1175

62-1177

62-1180

62-1182

62-1185

62-1187

62-1190

62-1192

5/16 2-1/2

2-1/23/8

1/2 3"

1/8 4"

6"

4"3/16

1/4

1/8

3/16

1/4

1/8

1/4

2-1/2

2-1/2

SOFT MATERIAL ENGRAVING TOOLS

WE CALL THEM ENGRAVING TOOLS. BUT THEY ARE ALSO USED FOR CHAMFERING, COUNTER SINKING, TAPERED REAMING ETC.

STANDARD POINTTIP DIA APROX .015 FASTER FREE CUTTING

APPLICATION :

INCLUDED ANGLE

ANGLE PER SIDE IS INCLUDED ANGLE DIVIDED BY TWO

1/8

ITI CARBIDE

ENGRAVING TOOLS


ALTINCOATED EDP#

62-1095-C

62-1100-C

62-1105-C

62-1110-C

62-1115-C

62-1117-C

62-1120-C

62-1125-C

62-1130-C

62-1135-C

62-1137-C

62-1140-C

62-1145-C

62-1150-C

62-1155-C

62-1157-C

62-1160-C

62-1162-C

62-1165-C

62-1167-C

62-1170-C

62-1172-C

62-1175-C

62-1177-C

62-1180-C

62-1182-C

62-1185-C

62-1187-C

62-1190-C

62-1192-C

62-1500-C

62-1505-C

62-1510-C

62-1520-C

62-1525-C

62-1530-C

62-1540-C

62-1545-C

62-1550-C

TINCOATED EDP#

ALTINCOATED EDP#

62-1400-C

62-1402-C

62-1405-C

62-1410-C

62-1415-C

62-1417-C

62-1420-C

62-1425-C

62-1430-C

62-1435-C

62-1437-C

62-1440-C

62-1445-C

62-1450-C

62-1455-C

ALTINCOATED EDP#

62-1200-C

62-1205-C

62-1210-C

ALTINCOATED EDP#

62-1800-C

62-1805-C

62-1810-C

62-1815-C

62-1820-C

62-1825-C

62-1830-C

62-1835-C

62-1840-C

62-1845-C

62-1850-C

62-1855-C

made from

2-1/2

2-1/2

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


ORDER

EDP#O.A.L.

SHANK

DIA.

TIPINCLUDED ANGLE

62-1600

62-1605

62-1610

62-1615

62-1620

62-1625

62-1630

62-1635

62-1640

40°

60°

90°

40°

60°

90°

40°

60°

90°

1/8 2"

2.53/16

1/4

ALTINCOATED EDP#

62-1600-C

62-1605-C

62-1610-C

62-1615-C

62-1620-C

62-1625-C

62-1630-C

62-1635-C

62-1640-C

SPIRAL FLUTEENGRAVING TOOLSTIP DIA APROX .004 STRONGER ANDSLICES BETTER THAN STRAIGHT FLUTE

CHISEL STYLEENGRAVING TOOLSTIP DIA APROX .002 SLOWER CUTTINGGREAT FOR CHAMFERING SMALL HOLES

RADIUS TIPENGRAVING TOOLSSTRONGER THAN POINTEDLONGER LASTING

2 FLUTEENGRAVING TOOLSBETTER FOR SLOWER RPM MACHINES

ENGRAVING TOOLS

2.5

ORDER

EDP# O.A.L.SHANK

DIA.

TIPINCLUDED ANGLE

62-2400

62-2405

62-2410

62-2415

62-2420

62-2425

62-2430

62-2435

62-2440

40°

60°

90°

40°

60°

90°

40°

60°

90°

1/8 2"

2.53/16

1/4

ALTINCOATED EDP#

62-2400-C

62-2405-C

62-2410-C

62-2415-C

62-2420-C

62-2425-C

62-2430-C

62-2435-C

62-2440-C

2.5


ORDER

EDP# O.A.L.SHANK

DIA.

TIPINCLUDED ANGLE

62-2200

62-2205

62-2210

62-2215

62-2220

62-2225

62-2230

62-2235

62-2240

62-2250

62-2260

62-2270

62-2280

62-2290

62-2300

62-2310

30°

40°

60°

90°

1/8

1/8

1/8

1/8

2"

2"

2"

2"

ALTINCOATED EDP#

62-2200-C

62-2205-C

62-2210-C

62-2215-C

62-2220-C

62-2225-C

62-2230-C

62-2235-C

62-2240-C

62-2250-C

62-2260-C

62-2270-C

62-2280-C

62-2290-C

62-2300-C

62-2310-C

TIP RADIUS

.005

.010

.015

.020

.005

.010

.015

.020

.005

.010

.015

.020

.005

.010

.015

.020

ORDER

EDP# O.A.L.SHANK

DIA.

TIPINCLUDED ANGLE

62-2600

62-2605

62-2610

62-2615

62-2620

62-2625

62-2630

62-2635

62-2640

62-2650

62-2660

62-2670

62-2680

62-2690

30°

60°

90°

120°

2.0

2.5

2.5

2.0

2.0

2.5

2.5

2.0

2.0

2.5

2.5

2.0

2.5

2.5

ALTINCOATED EDP#

62-2600-C

62-2605-C

62-2610-C

62-2615-C

62-2620-C

62-2625-C

62-2630-C

62-2635-C

62-2640-C

62-2650-C

62-2660-C

62-2670-C

62-2680-C

62-2690-C

WEB THICKNESS

.005

.005

.005

.005

.010

.005

.005

.005

.010

.005

.005

.005

.005

.005

1/8

3/16

1/4

1/8

1/8

3/16

1/4

1/8

1/8

3/16

1/4

1/8

3/16

1/4

51

EN

GR

AV

ING

T

OO

LS


INTERNAL TOOL INC.


ORDER

EDP#

NECK

DIAMETER

SHANK

DIA.

HEAD

DIA.

SERIES 65

HEAD

WIDTH

.120 .072 .075 2"

NECK

LENGTHOVERALL

LENGTH

1/8

.180 .093 .100 2-1/2 3/16

.240 .093 .165 2-1/2 1/4

.310 .093 .200 2-1/2 5/16

.360 .125 .250 2-1/2 3/8

.490 .156 .350 3" 1/2

CHAMFER

SIZE

.020

.032

.046

.062

.032

.032

EDGE BREAKERSOUTSIDE DIAMETER AND CHAMFERS WILL CUT

NECKLENGTH

90°INCLUDED

HEAD DIA.

OVERALLLENGTH

HEADWIDTH

BREAK EDGESON SLOTS

BREAK EDGESON HOLES

BREAK EDGESON ANY SHAPE

APPLICATION : FOR EDGE BREAKING / CHAMFERING.

65-118065-118565-119065-119565-120065-120565-121065-121565-122065-122565-123065-123565-124065-124565-125065-125565-126065-126565-127065-127565-128065-128565-129065-129565-1300

.187

.375

.187

.375

.250

.500

.250

.500

.7501.000.250.500.7501.000.250.500.7501.000.250.500.7501.000.500.7501.000

ITC CARBIDE

ALTINCOATED EDP#

65-1180-C65-1185-C65-1190-C65-1195-C65-1200-C65-1205-C65-1210-C65-1215-C65-1220-C65-1225-C65-1230-C65-1235-C65-1240-C65-1245-C65-1250-C65-1255-C65-1260-C65-1265-C65-1270-C65-1275-C65-1280-C65-1285-C65-1290-C65-1295-C65-1300-C

made from

52

CNC BACK-SPOT FACERS

SERIES 66

ORDER EDP#

ALTIN COATED SHANKREACH

.375

.625

.375

.625

.500

.750

.500

.750

.500

.7501.000.500.7501.0001.250.500.7501.0001.250

.225

.530

3/8

5/16

1/4

1/2

3/16

.085

.100

.130

.190

.225

HEAD DIAMETER

HEAD THICKNESS

REACH

OFFSET

HEAD DIAMETER

HEADTHICKNESS

3/32

1/8

1/8

APPLICATION : USED TO CREATE A C'BORE ON THE BACK SIDE ORINSIDE OF A PART USING CIRCULAR INTERPOLATION ON A CNC MILL

OVERALL LENGTH

2-1/2

2-1/2

2-1/2

2-1/2

3"

5/32

3/16

66-110066-110566-111066-111566-112066-112566-113066-113566-114066-114566-115066-115566-116066-116566-117066-117566-118066-118566-1190

3/4

1/8

3/32

.270

.370

.435

.065

.050

5/8 3-1/2

4"

.180

.135

ITC CARBIDE

OFFSET

C'BORE DIAMETER

3°

1°TYP.


MAXIMUMC'BORE DIA.

.235

.310

.395

.470

.630

.815

.980

made from

66-1100-C66-1105-C66-1110-C66-1115-C66-1120-C66-1125-C66-1130-C66-1135-C66-1140-C66-1145-C66-1150-C66-1155-C66-1160-C66-1165-C66-1170-C66-1175-C66-1180-C66-1185-C66-1190-C

.090

1/8 2"

.045 .060 .015

.075 .050 .012.040

2" 1/8

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


SERIES 67

REVERSE CORNER ROUNDERS

HEAD DIA.

OVERALLLENGTH

NECKLENGTH

NECKDIAMETER

SHANKDIAMETER

HEADWIDTH

RADIUS

ORDER

EDP#

ALTIN

COATED

NECK

DIAMETER

SHANK

DIA. HEAD

DIA.

HEAD

WIDTH

NECK

LENGTH

OVERALL

LENGTH RADIUS

SIZE

67-140067-140567-141067-141567-142067-142567-143067-143567-144067-144567-145067-145567-146067-146567-147067-147567-148067-148567-149067-149567-150067-1505

.031.187 .110 3/16

.047.250 .140 1/4

.062.312 .170 5/16 1/16

.093.375 .170 3/8 2-1/2

.125.500 .230 1/2 3"

.187 .230 5/8 3/32 3-1/2

APPLICATION : FOR ROUNDING BACK OR INSIDE CORNERS

ITC CARBIDE

ITC CARBIDE: HIGH TRANSVERSE RUPTURE STRENGTH

DOUBLE CHAMFER CUTTERSORDER

EDP#

TOOL

ID

TOP

WIDTH

SHANK

DIA.

OVERALL

LENGTH

72-1000

72-1020

72-1030

72-1040

72-1050

72-1060

72-1070

72-1080

72-1090

72-2000

.100

.135

.160

.200

.260

.320

.375

.510

.635

.760

2-1/2

2-1/2

2-1/2

3"

3"

3"

3"

3"

3"

4"

DC-250-100

DC-312-135

DC-375-160

DC-500-210

DC-500-260

DC-500-320

DC-500-385

DC-500-510

DC-500-635

DC-500-760

.250

.312

.375

.500

.500

.500

.500

.500

.500

.500

SERIES 72 APPLICATION : FOR CHAMFERING BOTH SIDES OF A PART OR PLATE

ITC CARBIDE

BOTTOM

WIDTH

.020

.023

.028

.042

.089

.149

.214

.339

.464

.569

BOTTOM WIDTH

TOP WIDTH

1/16

3/8 LENGTH OF CUT ON OD

90°

4 FLUTE

BOLDLINES CUT

SHANK DIAMETER

FORM

DEPTH

FORMDEPTH

1/64 RAD'S

.044

.050

.060

.080

.080

.080

.080

.080

.080

.100

.625

made from

made from

67-1400-C67-1405-C67-1410-C67-1415-C67-1420-C67-1425-C67-1430-C67-1435-C67-1440-C67-1445-C67-1450-C67-1455-C67-1460-C67-1465-C67-1470-C67-1475-C67-1480-C67-1485-C67-1490-C67-1495-C67-1500-C67-1505-C

.250

.500

.750

.375

.625

.875

.375

.625

.8751.000.500.7501.0001.250.500.7501.0001.250.500.7501.0001.250

3/32

3/32

1/16

1/16

2-1/2

2-1/2

2-1/2

INTERNAL TOOL INC.


CHAMFERING ENDMILLS

ANGLE

LENGTH

2 FLUTE

SINGLE END

CHAMFER MILLS

UN-COATED

EDP#

SHANK

DIA.

2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"


INCLUDED

ANGLE

1/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/2

OVERALL

LENGTH

APPLICATION :

ITI CARBIDE

64-274064-275064-276064-277064-278064-279064-279564-280064-281064-282064-283064-284064-284564-285064-286064-287064-288064-289064-289264-289464-289564-289664-289764-289864-289964-290064-291064-292064-293064-294064-721064-721564-722064-722564-723064-723564-723764-723864-724064-724564-725064-725564-725764-725864-726064-726564-727064-727564-728064-728564-729064-729564-730064-7305

ALTINCOATED EDP#

.012

.021

.030

.039

.047

.064

.035

.050

.060

.090

.105

.140

.060

.090

.125

.156

.187

.250

.070

.105

.140

.180

.200

.280

.105

.160

.200

.270

.312

.420

.130

.195

.250

.310

.375

.500

.145

.220

.280

.350

.430

.580

.165

.250

.320

.405

.490

.660

.215

.340

.460

.580

.690

.920

SERIES 64 2 FLUTE

GROUND WITH POSITIVE AXIALRAKE & CLEARANCEPRIMARILY FOR ALUMINUM &SOFTER MATERIALS

SHANK

DIA.

.012

.021

.030

.039

.047

.064

.035

.050

.060

.090

.105

.140

.060

.090

.125

.156

.187

.250

.070

.105

.140

.180

.200

.280

.105

.160

.200

.270

.312

.420

.130

.195

.250

.310

.375

.500

.145

.220

.280

.350

.430

.580

.165

.250

.320

.405

.490

.660

.215

.340

.460

.580

.690

.920

2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2-1/22-1/22-1/23"2-1/22-1/22"2-1/22-1/23"2-1/22-1/22"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"

64-473064-474064-475064-476064-478064-479064-479564-480064-481064-482064-483064-484064-484564-485064-486064-487064-488064-489064-489164-489264-489364-489464-489564-489664-489864-490064-491064-492064-493064-494064-738064-739064-740064-740264-741064-741564-741664-741864-742064-742564-743064-743564-743864-743964-744064-744564-745064-745564-746064-746564-747064-747564-748064-7485

120°4 flute

INCLUDED

ANGLE

ANGLE

LENGTH

1/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/2

OVERALL

LENGTH

SERIES 64 4FLUTE


ALTINCOATED EDP#

UN-COATED

EDP#

90°4 flute

60°4 flute

50°4 flute

45°4 flute

40°4 flute

60° PER SIDE

45° PER SIDE

30° PER SIDE

25° PER SIDE

22.5° PER SIDE

20° PER SIDE

60°2 flute

30° PER SIDE

90°2 flute

45° PER SIDE

120°2 flute

60° PER SIDE

50°2 flute

45°2 flute

40°2 flute

4 FLUTE

SINGLE END

CHAMFER MILLS GROUND WITH POSITIVE AXIALRAKE & CLEARANCEPRIMARILY FOR STEEL &TOUGHER MATERIALS

APPLICATION :

ITI CARBIDE

25° PER SIDE

22.5° PER SIDE

20° PER SIDE

made from made from

SINGLE END

CH

AM

FE

RM

ILL

S

30°2 flute

15° PER SIDE

82°2 flute41° PER SIDE

150°2 flute

75° PER SIDE

150°4 flute

75° PER SIDE


30°4 flute

15° PER SIDE

30°

60°

45°

45°

41°

49°

60°

30°

75°

15°

65°

25°

67.5°

22.5°

70°

20°

15°

75°


CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


OVERALL

LENGTH

SHANK

DIA.

.050

.060

.090

.105

.140

.090

.125

.156

.187

.250

.160

.200

.270

.312

.420

64-880064-881064-882064-883064-884064-885064-886064-887064-888064-889064-890064-891064-892064-893064-8940

INCLUDED

ANGLE

3/161/45/163/81/23/161/45/163/81/23/161/45/163/81/2

4"4"4"6"6"4"4"4"6"6"4"4"4"6"6"

ITI CARBIDE

ANGLE

LENGTH

ALTINCOATED EDP#

64-8800-C64-8810-C64-8820-C64-8830-C64-8840-C64-8850-C64-8860-C64-8870-C64-8880-C64-8890-C64-8900-C64-8910-C64-8920-C64-8930-C64-8940-C

SHANK

DIA.

.050

.060

.090

.105

.140

.090

.125

.156

.187

.250

.160

.200

.270

.312

.420

4"4"4"6"6"4"4"4"6"6"4"4"4"6"6"

64-680064-681064-682064-683064-684064-685064-686064-687064-688064-689064-690064-691064-692064-693064-6940

INCLUDED

ANGLE ANGLE

LENGTH

3/161/45/163/81/23/161/45/163/81/23/161/45/163/81/2

OVERALL

LENGTH

ITI CARBIDE

UN-COATED

EDP#

ALTINCOATED EDP#

UN-COATED

EDP#


CHAMFER

C'SINK

EDGEBREAK

NOW AVAILABLE WITHALTIN COATING

INCLUDED ANGLE


ANGLE LENGTH

ITI CARBIDE: PREMIUM SUBMICRON GRADE CARBIDE

2 FLUTE LONG REACH

CHAMFER MILLSAPPLICATION :


APPLICATION :GROUND WITH POSITIVEAXIAL RAKE & CLEARANCEPRIMARILY FOR STEEL & TOUGHERMATERIALS

120°4 flute

60° PER SIDE

90°4 flute

60°4 flute

45° PER SIDE

30° PER SIDE



60°2 flute

30° PER SIDE

SERIES 64 4FLUTE LONGSERIES 64 2 FLUTE LONG

4 FLUTE LONG REACH

CHAMFER MILLS

made frommade from

LONG SINGLE END

OVERALL

LENGTH

SHANK

DIA.

.050

.060

.090

.105

.140

.090

.125

.156

.187

.250

.160

.200

.270

.312

.420

INCLUDED

ANGLE

3/161/45/163/81/23/161/45/163/81/23/161/45/163/81/2

4"4"4"6"6"4"4"4"6"6"4"4"4"6"6"

ITI CARBIDE

ANGLE

LENGTH

ALTINCOATED EDP#


SHANK

DIA.

.050

.060

.090

.105

.140

.090

.125

.156

.187

.250

.160

.200

.270

.312

.420

4"4"4"6"6"4"4"4"6"6"4"4"4"6"6"

INCLUDED

ANGLE

ANGLE

LENGTH

3/161/45/163/81/23/161/45/163/81/23/161/45/163/81/2

OVERALL

LENGTH

ITI CARBIDE

UN-COATED

EDP#

ALTINCOATED EDP#

UN-COATED

EDP#


CHAMFER

C'SINK

EDGE BREAK

INCLUDED ANGLE


ANGLE LENGTH

2 FLUTE LONG REACH

CHAMFER MILLSAPPLICATION :


APPLICATION :GROUND WITH POSITIVEAXIAL RAKE & CLEARANCEPRIMARILY FOR STEEL & TOUGHERMATERIALS

120°4 flute

60° PER SIDE

90°4 flute

60°4 flute

45° PER SIDE

30° PER SIDE



60°2 flute

30° PER SIDE

SERIES 64 4FLUTE LONGSERIES 64 2 FLUTE LONG

4 FLUTE LONG REACH

CHAMFER MILLS

made frommade from

LONG DOUBLE END

CHAMFERING ENDMILLS

64-900064-901064-902064-903064-904064-905064-906064-907064-908064-909064-910064-911064-912064-913064-9140

64-915064-916064-917064-918064-919064-920064-921064-922064-923064-924064-925064-926064-927064-928064-9290

55

CH

AM

FE

RM

ILL

S

INTERNAL TOOL INC.


SHANK DIA.

INCLUDED ANGLE

2 FLUTE DOUBLE ENDCHAMFER MILLS

GROUND WITH POSITIVE AXIAL RAKE & CLEARANCEPRIMARILY FOR ALUMINUM & SOFTER MATERIALS

ANGLELENGTH

.007

.012

.019

.025

.030

.040

.012

.021

.030

.039

.047

.064

.035

.050

.060

.090

.105

.140

.180

.050

.075

.100

.130

.155

.205

.260

.060

.090

.125

.156

.187

.250

.310

.370

.490

.070

.105

.140

.180

.200

.280

.350

.105

.160

.200

.270

.312

.420

.540

64-111564-112064-112564-113064-113564-114064-114564-115064-115564-116064-116564-117064-117564-118064-120064-120364-120564-121064-121164-220064-220564-221064-221564-222064-222564-223064-121264-121364-121564-121764-122064-122564-122664-122964-123164-122464-122764-123064-123264-123564-124064-124164-123964-124264-124564-124764-125064-125564-1260

1/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/25/81/83/161/45/163/81/25/81/83/161/45/163/81/25/83/41"1/83/161/45/163/81/25/81/83/161/45/163/81/25/8

2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"3-1/22"2-1/22-1/22-1/22-1/23"3-1/22"21/22-1/22-1/22-1/23"3-1/24"4"2"2-1/22-1/22-1/22-1/23"3-1/22"2-1/22-1/22-1/22-1/23"3-1/2

120°2 flute

100°2 flute

90°2 flute

82°2 flute

60°2 flute

SERIES 64 2 FLUTE

APPLICATION :

OVERALL LENGTH

SERIES 64 2 FLUTE

ITI CARBIDE

UN-COATED

EDP#

ALTIN COATED EDP#

64-1115-C64-1120-C64-1125-C64-1130-C64-1135-C64-1140-C64-1145-C64-1150-C64-1155-C64-1160-C64-1165-C64-1170-C64-1175-C64-1180-C64-1200-C64-1203-C64-1205-C64-1210-C64-1211-C64-2200-C64-2205-C64-2210-C64-2215-C64-2220-C64-2225-C64-2230-C64-1212-C64-1213-C64-1215-C64-1217-C64-1220-C64-1225-C64-1226-C64-1229-C64-1231-C64-1224-C64-1227-C64-1230-C64-1232-C64-1235-C64-1240-C64-1241-C64-1239-C64-1242-C64-1245-C64-1247-C64-1250-C64-1255-C64-1260-C

UN-MATCHED TOOL VARIETY

made from


60° PER SIDE

160°2 flute

80° PER SIDE

50° PER SIDE

45° PER SIDE

41° PER SIDE

30° PER SIDE

CHAMFER

C'SINK

EDGE BREAK

75°

15°

10°

80°

30°

60°

40°

50°

45°

45°

41°

49°

60°

30°

ANGLE LENGTH

INCLUDED ANGLE+/- 1/2 DEGREE

CH

AM

FE

R M

ILL

S CHAMFERING ENDMILLS


56

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


GROUND WITH RAKE & CLEARANCEFOR STEEL & TOUGHER MATERIALS

CHAMFER

C'SINK

EDGEBREAK

4 FLUTE DOUBLE ENDCHAMFER MILLS

SERIES 64 4 FLUTE

APPLICATION :

CHAMFERING ENDMILLS


64-133064-133564-134064-134564-135064-135564-136064-136564-137064-137564-138064-138564-139064-139564-140064-140364-140564-141064-141164-440064-440564-441064-441564-442064-442564-443064-141264-141364-141564-141764-142064-142564-142664-142964-143164-142464-142764-143064-143264-143564-144064-144164-143964-144264-144564-144764-145064-145564-1460

64-1330-C64-1335-C64-1340-C64-1345-C64-1350-C64-1355-C64-1360-C64-1365-C64-1370-C64-1375-C64-1380-C64-1385-C64-1390-C64-1395-C64-1400-C64-1403-C64-1405-C64-1410-C64-1411-C64-4400-C64-4405-C64-4410-C64-4415-C64-4420-C64-4425-C64-4430-C64-1412-C64-1413-C64-1415-C64-1417-C64-1420-C64-1425-C64-1426-C64-1429-C64-1431-C64-1424-C64-1427-C64-1430-C64-1432-C64-1435-C64-1440-C64-1441-C64-1439-C64-1442-C64-1445-C64-1447-C64-1450-C64-1455-C64-1460-C

SHANK DIA.

INCLUDED ANGLE

ANGLELENGTH

1/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/25/81/83/161/45/163/81/25/81/83/161/45/163/81/25/83/41"1/83/161/45/163/81/25/81/83/161/45/163/81/25/8

2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"3-1/22"2-1/22-1/22-1/22-1/23"3-1/22"21/22-1/22-1/22-1/23"3-1/24"4"2"2-1/22-1/22-1/22-1/23"3-1/22"2-1/22-1/22-1/22-1/23"3-1/2

120°4 flute

100°4 flute

90°4 flute

82°4 flute

60°4 flute

OVERALL LENGTH

ITI CARBIDE

UN-COATED

EDP#

ALTIN COATED EDP#

made from


60° PER SIDE

160°4 flute

80° PER SIDE

50° PER SIDE

45° PER SIDE

41° PER SIDE

30° PER SIDE

75°

15°

10°

80°

30°

60°

40°

50°

45°

45°

41°

49°

60°

30°

ANGLE LENGTH

INCLUDED ANGLE+/- 1/2 DEGREE

CH

AM

FE

R M

ILL

S


.007

.012

.019

.025

.030

.040

.012

.021

.030

.039

.047

.064

.035

.050

.060

.090

.105

.140

.180

.050

.075

.100

.130

.155

.205

.260

.060

.090

.125

.156

.187

.250

.310

.370

.490

.070

.105

.140

.180

.200

.280

.350

.105

.160

.200

.270

.312

.420

.540

INTERNAL TOOL INC.


ORDER

EDP#

TOOL

IDSHANK

DIA. MINOR

DIAMETER

RADIUS

SIZEO.A.L.

2" 1/8

2"

1/4

2-1/2" 3/8

3" 1/2

3-1/2" 5/8

68-150068-150568-151068-151568-152068-152568-153068-153568-154068-154568-155068-155568-156068-156568-157068-157568-158068-158568-159068-159568-160068-160568-161068-161568-162068-162568-163068-163568-164068-164568-165068-165568-166068-166568-167068-167568-168068-168568-169068-169568-170068-1705

SR-125-005SR-125-008SR-125-010SR-125-012SR-125-015SR-125-016SR-125-019SR-125-020SR-125-024SR-125-025SR-125-028SR-125-030SR-125-031SR-125-032SR-125-035SR-125-040SR-187-047SR-187-050SR-187-059SR-187-060SR-187-063SR-250-078SR-250-079SR-250-094SR-250-098SR-312-109SR-312-118SR-312-125SR-375-138SR-375-140SR-375-156SR-375-158SR-500-172SR-500-177SR-500-188SR-500-197SR-500-203SR-500-216SR-500-219SR-625-235SR-625-236SR-625-250

.0050

.0079 (0.2 MM)

.0100

.0118 (0.3 MM)

.0150

.0157 (0.4 MM)

.0197 (0.5 MM)

.0200

.0236 (0.6 MM)

.0250

.0276 (0.7 MM)

.0300

.0312 (1/32)

.0315 (0.8 MM)

.0354 (0.9 MM)

.0394 (1.0 MM)

.0469 (3/64)

.0500

.0591 (1.5MM)

.0600

.0625 (1/16)

.0781 (5/64)

.0787 (2.0 MM)

.0938 (3/32)

.0984 (2.5 MM)

.1094 (7/64)

.1181 (3.0 MM)

.1250 (1/8)

.1378 (3.5 MM)

.1406 (9/64)

.1562 (5/32)

.1575 (4.0 MM)

.1719 (11/64)

.1772 (4.5 MM)

.1875 (3/16)

.1969 (5.0 MM)

.2031 (13/64)

.2165 (5.5 MM)

.2188 (7/32)

.2344 (15/64)

.2362 (6.0 MM)

.2500 (1/4)

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.055

.055

.055

.055

.055

.055

.055

.055

.055

.055

.055

.055

.055

.055

.105

.105

.105

3/16

5/16 2-1/2"

2-1/2"

MINORDIAMETER

SHANK DIA.

RADIUS SIZE

58 QUALITY TOOLING MADE IN THE USA

APPLICATION : USE IN TIGHT SPOTS WHERE THE TIP DIAMETERNEEDS TO BE SMALLEROR IN SOFTER MATERIALS THATCAN TAKE HIGHER RPMS


CORNER ROUNDING ENDMILLS

ORDER

EDP#

SHANK

DIA. MINOR

DIAMETER

RADIUS

SIZEO.A.L.

2" 1/8

2-1/2" 1/4

2-1/2" 3/8

3" 1/2

3-1/2" 5/8

4" 3/4

68-120068-120568-121068-121568-122068-122168-122268-122368-122568-123068-123568-124068-124568-125068-125568-126068-126568-127068-127568-128068-128568-129068-129568-129768-130068-130268-130568-130768-131068-131268-131568-131768-132068-132568-132768-133068-133568-134068-134268-134568-135068-135268-135568-136068-136568-1370

.010

.0156 (1/64)

.020

.025

.0312 (1/32)

.0156 (1/64)

.0312 (1/32)

.0625 (1/16)

.010

.0156 (1/64)

.020

.025

.0312 (1/32)

.035

.0394 (1MM)

.0469 (3/64)

.050

.055

.0591 (1.5MM)

.0625 (1/16)

.070

.075

.0781 (5/64)

.0787 (2MM)

.0938 (3/32)

.0984 (2.5MM)

.1094 (7/64)

.1181 (3MM)

.125 (1/8)

.140 (9/64

.1562 (5/32)

.1575 (4MM)

.1718 (11/64)

.1875 (3/16)

.1969 (5MM)

.2031 (13/64)

.2188 (7/32)

.2344 (15/64)

.2362 (6MM)

.250 (1/4)

.2812 (9/32)

.2969 (19/64)

.3125 (5/16)

.3281 (21/64)

.3438 (11/32)

.375 (3/8)

.100

.090

.080

.070

.060

.040

.040

.060

.140

.140

.140

.140

.140

.140

.140

.140

.140

.090

.090

.090

.090

.090

.115

.115

.115

.115

.115

.115

.115

.120

.120

.120

.120

.120

.120

.120

.120

.120

.120

.120

.120

.120

.120

.240

.240

.240

3/16 2"

ALTINCOATED EDP#

68-1200-C68-1205-C68-1210-C68-1215-C68-1220-C68-1221-C68-1222-C68-1223-C68-1225-C68-1230-C68-1235-C68-1240-C68-1245-C68-1250-C68-1255-C68-1260-C68-1265-C68-1270-C68-1275-C68-1280-C68-1285-C68-1290-C68-1295-C68-1297-C68-1300-C68-1302-C68-1305-C68-1307-C68-1310-C68-1312-C68-1315-C68-1317-C68-1320-C68-1325-C68-1327-C68-1330-C68-1335-C68-1340-C68-1342-C68-1345-C68-1350-C68-1352-C68-1355-C68-1360-C68-1365-C68-1370-C

3 FLUTECORNER ROUNDING ENDMILLS

USE IN STEEL OR TOUGHER MATERIALSALSO AVAILABLE ALTIN COATED

APPLICATION :

made from

RADIUS HAS A 2° FLAREON TIP AND SIDES TO KEEP FROMGOUGING YOUR PART

1" 4"

CO

RN

ER

RO

UN

DE

RS

2 FLUTECORNER ROUNDING ENDMILLS

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


C

OR

NE

R R

OU

ND

ER

S

M

AD

E T

O O

RD

ER

MA

JOR

DIA

ME

TE

R

OV

ER

ALL

LE

NG

TH

IF N

OT

SU

RE

WE

WIL

LQ

UO

TE

ST

AN

DA

RD

RA

DIU

S S

IZE

Sim

ply

mak

e a

copy

fill

in th

e in

form

atio

n be

low

and

fax

or e

mai

l to

us.

fa

x #

909-

392-

2627

we

will

quo

te a

s so

on a

s po

ssib

le.

IN

FO

@in

tern

alto

ol.c

omA

ny d

imen

sion

you

r not

sur

e of

leav

e bl

ank

we

will

quo

te s

tand

ard.

fill

in s

heet

is

Als

o av

aila

ble

at I

nter

nalto

ol.c

om

Quo

te in

qua

nite

s of

?T

HE

MO

RE

YO

U B

UY

TH

E C

HE

AP

ER

TH

EY

GE

T

Com

pany

nam

e

Con

tact

Pho

ne

Fax

You

r dis

trib

utor

AN

GLE

'B'

AN

GLE

'A'

TIP

DIA

ME

TE

R

# O

F F

LUT

ES

WO

ULD

YO

U L

IKE

DO

UB

LE E

ND

OR

SIN

GLE

EN

D

IT

I C

AR

BID

E

INT

ER

NA

L T

OO

LT

OLE

RA

NC

E U

NLE

SS

OTH

ER

WIS

E S

PE

CIF

IED

.X =

+

/- 1

/32

.XX

= +

/- .0

10.X

XX

= +

/- .

002

.XX

XX

= /

- .0

005

AN

GLE

S +

/- 0

.15°

RE

VIS

ION

S:

DR

AW

N B

Y:

RE

V:

TO

OL

NU

MB

ER

:

DA

TE:

LEN

GTH

SPECIAL CORNER ROUNDING ENDMILLS

CO

RN

ER

RO

UN

DE

RS

59ON THE WEB: WWW.INTERNALTOOL.COM

INTERNAL TOOL INC.


ORDER

EDP#

SHANK

DIA.

SERIES 76

CUTTER DIAMETER

OVERALL

LENGTHWIDTH

NECK

DIAMETER

NECK

LENGTH

# OF

TEETH

.375 2-1/2.200 3/8 3/8 4

.500 3".250 3/8 1/2 6

.312 .150 5/16 5/16 4 2-1/25/16

3/8

1/2

+.000 / -.005

.0150

.0312

.0625

.0150

.0312

.0625

.0938

.1250

.0312

.0625

.0938

.1250

.1875

.0312

.0625

.0938

.1250

.1562

.1875

.2500

SOFT MATERIAL CUTTINGSOLID CARBIDE KEY CUTTERS

1/4 .250 .125 1/4 1/4 4

ITI CARBIDE

APPLICATION : ALL CLEARANCE ANGLES, RAKE ANGLES AND DISH CLEARANCE SPECIFICALY ENGINEEREDAND DESIGNED FOR CUTTING SOFTER MATERIALS ALUMINUM, PLASTICS, ETC.

HEAD DIA.+.000 / -.005

NECK LENGTH+.030 / -.000

WIDTH+.0005 / - .000

OVERALLLENGTH

1/4"DIAMETER

5/16"DIAMETER

3/8"DIAMETER

1/2"DIAMETER

FORALUMINUM

FORPLASTICS

FORCOPPER

KEY CUTTERS FORSOFTER MATERIALS


2-1/2

76-140076-143576-145576-146076-147076-148076-148576-149076-150076-151076-151576-152076-153076-153576-154576-155076-155576-156076-156576-1570

made from

KE

Y

CU

TT

ER

S

ANY WIDTHCAN BE REDUCED TO YOUR SPECIFICATIONS.

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


ORDER

EDP#

SHANK

DIA.

CUTTER DIAMETER

OVERALL

LENGTH WIDTH

NECK

DIAMETER

NECK

LENGTH

# OF

TEETH

7/8

3/4

1"

1-1/4"

+.015 / -.000

.0312

.0625

.0938

.1250

.1562

.1875

.2500

.0312

.0625

.0938

.1250

.1562

.1875

.2500

.3125

.3750

.0625

.1250

.1875

.2500

.0312

.0625

.0938

.1250

.1562

.1875

.2500

.3125

.3750

.0312

.0625

.0938

.1250

.1875

.2500

.3125

.3750

SOFT MATERIAL CUTTINGCARBIDE HEAD / STEEL SHANK KEY CUTTERS

5/8 .625 1/4 1/2 6 2-3/4"

78-166078-167078-168078-169078-170078-170578-172078-172878-173078-174078-175078-176078-176578-178578-180078-181078-181378-181578-182578-183578-184678-185078-185578-186078-186278-186578-187578-188578-189078-191278-191578-192078-192578-193278-194078-194578-1950

.750 1/4 1/2 6 2-3/4"

.875 1/4 1/2 6 2-3/4"

1/4 1/2 6 2-3/4"1.000

1/4 1/2 6 2-3/4"1.250

.280

.280

.280

.280

.280

.280

.280

.280

.280

.280

.280

.280

.280

.280

.490

.490

.280

.280

.280

.280

.280

.280

.280

.280

.280

.490

.490

.490

.490

.280

.280

.280

.280

.490

.490

.490

.490

APPLICATION :


NECK LENGTH+.030 / - .000

HEAD DIA.+.015 / -.000

HEAD WIDTH+.0005 / - .000

EX

TR

A L

ON

G 2

-3/4

" S

HA

NK

KEY CUTTERS FORSOFTER MATERIALS

ITC CARBIDE: SPECIALLY BLENDED FOR OPTIMUM PERFORMANCE

ALL CLEARANCE ANGLES, RAKE ANGLES AND DISH CLEARANCE SPECIFICALY ENGINEEREDAND DESIGNED FOR CUTTING SOFTER MATERIALS ALUMINUM, PLASTICS, ETC.

made from

KE

Y

CU

TT

ER

S


INTERNAL TOOL INC.


SHANK

DIA.

SERIES 76

CUTTER DIAMETER

OVERALL

LENGTH

CUTTER

WIDTH

NECK

DIAMETER

NECK

LENGTH # OF

TEETH

SOLID CARBIDE KEY CUTTERS

ONE PIECE SOLID CONSTRUCTION

HEAD DIA.+.000 / -.005


HEAD WIDTH+.0005 / - .000

OVERALLLENGTH

5/32

+.000 / -.005

76-079576-080076-080276-080476-081076-081276-081576-082076-082576-090076-090276-090476-090676-091076-091276-091476-092076-092276-092476-092676-092876-093076-093276-095076-095276-095476-095576-095776-096076-096276-096376-096476-096576-105076-105276-105476-105576-105776-105976-106076-106276-106576-106776-106876-106976-107576-109576-110076-110576-111076-111576-112076-112576-113076-1135

.010

.015

.020

.025

.0312 (1/32)

.0394 (1 MM)

.0469 (3/64)

.0625 (1/16)

.010

.015

.020

.025

.030

.0312 (1/32)

.035

.0394 (1MM)

.0469 (3/64)

.050

.055

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.010

.015

.020

.025

.0312 (1/32)

.0394 (1MM)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.010

.015

.020

.030

.0312 (1/32)

.0394 (1MM)

.040

.0469 (3/64)

.050

.0625 (1/16)

.0781 (5/64)

.0787 (2MM)

.0934 (3/32)

.1250 (1/8)

.010

.015

.018

.020

.023

.025

.028

.030

.0312 (1/32)

ANY WIDTH REDUCED TO YOUR SPECIFICATIONS.


1/8

ITI CARBIDE

1/8"DIAMETER

3/16"DIAMETER

1/4"DIAMETER

5/16"DIAMETER

3/8"DIAMETER

1/2"DIAMETER

SPECIALS, CORNER RADIUS, STAGGER TOOTH AND LEFT HAND AVAILABLE.

76-0795-C76-0800-C76-0802-C76-0804-C76-0810-C76-0812-C76-0815-C76-0820-C76-0825-C76-0900-C76-0902-C76-0904-C76-0906-C76-0910-C76-0912-C76-0914-C76-0920-C76-0922-C76-0924-C76-0926-C76-0928-C76-0930-C76-0932-C76-0950-C76-0952-C76-0954-C76-0955-C76-0957-C76-0960-C76-0962-C76-0963-C76-0964-C76-0965-C76-1050-C76-1052-C76-1054-C76-1055-C76-1057-C76-1059-C76-1060-C76-1062-C76-1065-C76-1067-C76-1068-C76-1069-C76-1075-C76-1095-C76-1100-C76-1105-C76-1110-C76-1115-C76-1120-C76-1125-C76-1130-C76-1135-C

3/32

3/16

.046

.060

.078

.094

.125

ORDER

EDP#

ALTINCOATEDEDP#

made from

1/4

1/8

1/8

3/16

3/16

1/4

1/8

1/8

3/16

3/16

1/4

4

6

6

6

6

2"

2"

2-1/2

2-1/2

2-1/2

KE

Y

CU

TT

ER

S



CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


1/4CONT.

.0350

.0380

.0394 (1MM)

.0400

.0469 (3/64)

.0500

.0600

.0625 (1/16)

.0781 (5/64)

.0787 (2MM)

.0937 (3/32)

.0150

.0200

.0312 (1/32)

.0394 (1MM)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0787 (2MM)

.0938 (3/32)

.1250 (1/8)

.1562 (5/32)

.010

.015

.020

.0312 (1/32)

.0394 (1MM)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0787 (2MM)

.0938 (3/32)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

.015

.0312 (1/32)

.0394 (1MM)

.0468 (3/64)

.0625 (1/16)

.0781 (5/64)

.0787 (2 MM)

.0938 (3/32)

.1181 (3MM)

.1250 (1/8)

.1406 (9/64)

.1562 (5/32)

.1575 (4MM)

.1875 (3/16)

.1969 (5MM)

.2344 (15/64)

.2362 (6MM)

.2500 (1/4)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16

.2500 (1/4)

5/16

3/8

1/2

76-114076-114576-114776-115076-115176-115376-115476-115576-115776-115876-115976-116076-116576-117076-117276-117576-118076-118276-118476-118576-119076-119576-119776-119876-119976-120076-120276-120576-121076-121276-121376-121576-122076-122576-123076-123276-123576-123776-124076-124576-124776-124876-125076-125276-125576-125776-126076-126276-126576-126776-126876-126976-127076-128076-129076-130076-131076-1320

SHANK

DIA.

CUTTER DIAMETER

OVERALL

LENGTH CUTTER

WIDTH

NECK

DIAMETER

NECK

LENGTH # OF

TEETH

ORDER

EDP#

ALTINCOATEDEDP#

76-1140-C76-1145-C76-1147-C76-1150-C76-1151-C76-1153-C76-1154-C76-1155-C76-1157-C76-1158-C76-1159-C76-1160-C76-1165-C76-1170-C76-1172-C76-1175-C76-1180-C76-1182-C76-1184-C76-1185-C76-1190-C76-1195-C76-1197-C76-1198-C76-1199-C76-1200-C76-1202-C76-1205-C76-1210-C76-1212-C76-1213-C76-1215-C76-1220-C76-1225-C76-1230-C76-1232-C76-1235-C76-1237-C76-1240-C76-1245-C76-1247-C76-1248-C76-1250-C76-1252-C76-1255-C76-1257-C76-1260-C76-1262-C76-1265-C76-1267-C76-1268-C76-1269-C76-1270-C76-1280-C76-1290-C76-1300-C76-1310-C76-1320-C

.125

.150

.200

.250

.300

1/4

5/16

3/8

3/8

1/2

6

8

8

10

10

2-1/2

2-1/2

2-1/2

3"

3-1/2

1/4

5/16

3/8

3/16

5/8

SERIES 76 ONE PIECE SOLID CONSTRUCTIONSOLID CARBIDE KEY CUTTERS


HEAD DIA.+.000 / -.005


HEAD WIDTH+.0005 / - .000

OVERALLLENGTH

63


5/8

KE

Y

CU

TT

ER

S



INTERNAL TOOL INC.


3/16

.0156 (1/64)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0156 (1/64)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0156 (1/64)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0156 (1/64)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0156 (1/64)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

1/4

5/16

1/2

83-100083-101083-102083-103083-104083-105083-106083-107083-108083-109083-110083-111083-112083-113083-114083-115083-116083-117083-118083-119083-120083-121083-122083-123083-124083-125083-126083-127083-128083-129083-130083-131083-132083-133083-134083-135083-136083-137083-1380

SHANK

DIA. CUTTER DIAMETER

OVERALL

LENGTH WIDTH NECK

DIAMETER

NECK

LENGTH # OF

TEETH

ORDER

EDP#

ALTINCOATEDEDP#

.093

.125

.156

.187

.250

.300

9/16

3/4

1"

1-1/8

1-1/2

1-5/8

6

6

8

8

10

10

2-1/2

2-1/2

2-1/2

2-1/2

3"

3-1/2

3/16

1/4

5/16

3/8

1/2

5/8

SERIES 83

SOLID CARBIDELONG REACH KEY CUTTERS


3/8

83-1000-C83-1010-C83-1020-C83-1030-C83-1040-C83-1050-C83-1060-C83-1070-C83-1080-C83-1090-C83-1100-C83-1110-C83-1120-C83-1130-C83-1140-C83-1150-C83-1160-C83-1170-C83-1180-C83-1190-C83-1200-C83-1210-C83-1220-C83-1230-C83-1240-C83-1250-C83-1260-C83-1270-C83-1280-C83-1290-C83-1300-C83-1310-C83-1320-C83-1330-C83-1340-C83-1350-C83-1360-C83-1370-C83-1380-C

5/8

64

NECK

DIAMETER

WIDTH

NECK

LENGTH

KE

Y

CU

TT

ER

S



DIAMETER

+.000 / -.005

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


SOLID CARBIDEDEEP SLOTTING KEY CUTTERS

.0156 (1/64)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0156 (1/64)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0156 (1/64)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0156 (1/64)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

1/4

5/16

1/2

57-100057-101057-102057-103057-104057-105057-106057-107057-108057-109057-110057-111057-112057-113057-114057-115057-116057-117057-118057-119057-120057-121057-122057-123057-124057-125057-126057-127057-128057-129057-130057-1310

SHANK

DIA. CUTTER DIAMETER

OVERALL

LENGTH

NECK

DIAMETER

NECK

LENGTH # OF

TEETH

ORDER

EDP#

ALTINCOATEDEDP#

.070 NECKDIAMETER

.090 DEPTH

OF CUT

.090 NECK DIAMETER

.110 DEPTH

OF CUT

.120 NECK DIAMETER

.125 DEPTH

OF CUT

.150 NECK DIAMETER

.175 DEPTH OF CUT

.180 NECK DIAMETER .220DEPTH

OFCUT

1/8

1/8

3/16

1/4

1/4

6

8

8

10

10

2-1/2

2-1/2

2-1/2

3"

3-1/2

1/4

5/16

3/8

1/2

5/8

3/8

57-1000-C57-1010-C57-1020-C57-1030-C57-1040-C57-1050-C57-1060-C57-1070-C57-1080-C57-1090-C57-1100-C57-1110-C57-1120-C57-1130-C57-1140-C57-1150-C57-1160-C57-1170-C57-1180-C57-1190-C57-1200-C57-1210-C57-1220-C57-1230-C57-1240-C57-1250-C57-1260-C57-1270-C57-1280-C57-1290-C57-1300-C57-1310-C


5/8

65

WIDTH

WIDTH

NECK LENGTH

NECK DIAMETER

DEPTH OF CUT

KE

Y

CU

TT

ER

S



DIAMETER

+.000 / -.005

INTERNAL TOOL INC.



HEAD DIA.+.015 / -.000

HEAD WIDTH+.0005 / - .000

EX

TR

A L

ON

G 2

-3/4

" S

HA

NK

2-3/41/2 8

2-3/41/2 10

2-3/41/2 10

# 204

# 304

# 404

# 305

# 405

# 505

# 605

.0156 (1/64

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0312 (1/32)

.0625 (1/16)

.1250 (1/8)

.0156 (1/64)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1094 (7/64)

.1250 (1/8)

.1562 (5/32)

.0312 (1/32)

.0625 (1/16)

.1250 (1/8)

.0156 (1/64)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1094 (7/64)

.1250 (1/8)

.1406 (9/64)

.1562 (5/32)

.1875 (3/16)

.2031 (13/64)

.2188 (7/32)

.2500 (1/4)

.2812 (9/32)

.0625 (1/16)

.1250 (1/8)

1/2

1/2

1/2 8

10

10 2-3/4

2-3/4

2-3/4

1/41/41/41/41/41/41/41/41/41/41/41/81/41/81/41/81/41/41/41/41/41/41/41/41/41/81/41/41/41/41/41/41/41/41/41/41/41/41/4

.200

.200

.200

.200

.200

.200

.200

.250

.250

.250

.250

.250

.250

.135

.250

.165

.250

.190

.250

.250

.250

.250

.280

.280

.280

.280

.280

.195

.280

.225

.280

.250

.250

.280

.280

.280

.280

.280

.280

ORDER EDP # WIDTH STD.#

SHANK

DIA.

SHANK

LENGTH

NECK

LENGTH

# OF

TEETH

NECK

DIA.

SERIES 78

CARBIDE HEAD STEEL SHANK KEY CUTTERS

3/8

7/16

1/2

9/16

5/8

11/16

CARBIDE HEAD KEY CUTTERS

HEADDIAMETER

ITI CARBIDE

CONTINUED ON NEXT PAGE.


78-109078-109578-110078-110578-110678-111078-111578-111678-111778-111878-111978-112078-112578-113078-113578-114078-114578-115078-115578-115678-115778-115878-115978-116078-116578-117078-117578-118078-118578-119078-119578-120078-120578-121078-121578-122078-122578-122678-1227

+.015 / -.000

made from


ALTINCOATEDEDP#

66

STANDARD TEETH

KE

Y

CU

TT

ER

S


CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.



SERIES 78

HEAD WIDTH+.0005 / - .000

HEAD DIA.+.015 / -.000


SHANK

DIA. SHANK

LENGTH

NECK

DIA.

NECK

LENGTH

# OF

TEETH

2-3/41/2 12

2-3/41/2 10

#507

#607

#707

#608

#708

#808

#1008

#1208

#807

78-122878-122978-123078-123578-124078-124578-125078-125578-126078-126578-127078-127578-128078-128578-129078-129578-130078-130578-131078-131178-131278-131378-131478-131578-132078-132578-133078-133578-134078-134578-134678-134878-135078-135278-135578-136078-136278-136578-137078-137578-138078-138578-1390

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1094 (7/64)

.1250 (1/8)

.1406 (9/64)

.1562 (5/32)

.1875 (3/16)

.2031 (13/64)

.2188 (7/32)

.2344 (15/64)

.2500 (1/4)

.2656 (17/64)

.2812 (9/32)

.3125 (5/16)

.3438 (11/32)

.3750 (3/8)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

.2188 (7/32)

.2500 (1/4)

.3125 (5/16)

.3750 (3/8)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

.2188 (7/32)

.2500 (1/4)

.2812 (9/32)

.3125 (5/16)

.3750 (3/8)

.280

.280

.280

.280

.280

.280

.230

.280

.250

.280

.280

.280

.280

.280

.490

.490

.490

.490

.490

.280

.280

.280

.280

.280

.250

.280

.280

.345

.490

.490

.280

.280

.280

.280

.280

.280

.280

.280

.340

.345

.490

.400

.400

1/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/4

ORDER EDP # STD.#

7/8

1"


HEADDIAMETER

ITII CARBIDE

+.015 / -.000

made from

ALTINCOATEDEDP#

67

WIDTH

STANDARD TEETH

KE

Y

CU

TT

ER

S


3/4

#406

#506

#606

#806



1/2 12 2-3/4

EX

TR

A L

ON

G 2

-3/4

" S

HA

NK

INTERNAL TOOL INC.



SERIES 78

WIDTH+.0005 / - .000

HEAD DIA.+.015 / -.000


EX

TR

A L

ON

G 2

-3/4

" S

HA

NK

exc

ept

wh

ere

no

ted

2-3/41/2 12

78-139278-139478-139578-140078-140578-141078-141278-141378-141578-141778-142078-142578-142778-143078-143578-144078-144578-145078-155578-155778-156078-156578-157078-157278-147578-148078-1485

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

.2188 (7/32)

.2500 (1/4)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

.2188 (7/32)

.2500 (1/4)

.3125 (5/16)

.3750 (3/8)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8

.1562 (5/32)

.1875 (3/16)

.2500 (1/4)

.3125 (5/16)

.3750 (3/8)

.280

.280

.280

.280

.490

.490

.280

.280

.280

.280

.280

.280

.280

.320

.380

.379

.437

.430

.280

.280

.280

.280

.280

.490

.400

.470

.470

1/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/4

1-1/4 1/2 14

2"

solid carbide

78-1392-C78-1394-C78-1395-C78-1400-C78-1405-C78-1410-C78-1412-C78-1413-C78-1415-C78-1417-C78-1420-C78-1425-C78-1427-C78-1430-C78-1435-C78-1440-C78-1445-C78-1450-C78-1555-C78-1557-C78-1560-C78-1565-C78-1570-C78-1572-C78-1475-C78-1480-C78-1485-C

68STANDARD TEETH

KE

Y

CU

TT

ER

S


SHANK

DIA.

SHANK

LENGTH

NECK

DIA.

NECK

LENGTH

# OF

TEETH

ORDER EDP # STD.#


HEADDIAMETER

ITII CARBIDE

+.015 / -.000

made from

ALTINCOATEDEDP#

WIDTH


1-1/8

#710#810

#610

#1010

#1210

#811#1011#1211

2-3/4

1-3/81/2 14 2-3/4

141/2


CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.



SERIES 78

WIDTH+.0005 / - .000

HEAD DIA.+.015 / -.000


EX

TR

A L

ON

G 2

-3/4

" S

HA

NK

exc

ept

wh

ere

no

ted

2-3/41/2

2-3/4

1/2 18

16

78-145278-145378-145578-145778-146078-146578-147078-149078-149578-150078-150578-150778-150878-151078-151278-151578-152078-152278-152378-152578-152778-1530

.0312 (1/32)

.0469 (3/64

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

.2500 (1/4)

.3125 (5/16)

.3750 (3/8)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

.280

.280

.280

.280

.280

.280

.490

.430

.460

.490

.490

.490

.490

.490

.490

.490

.490

.490

.490

.490

.490

.490

1/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/4

1-3/4 1/2 16

2"

solid carbide

78-1452-C78-1453-C78-1455-C78-1457-C78-1460-C78-1465-C78-1470-C78-1490-C78-1495-C78-1500-C78-1505-C78-1507-C78-1508-C78-1510-C78-1512-C78-1515-C78-1520-C78-1522-C78-1523-C78-1525-C78-1527-C78-1530-C

STANDARD TEETH

2"

SHANK

DIA. SHANK

LENGTH

NECK

DIA.

NECK

LENGTH # OF

TEETH

ORDER EDP # STD.#

HEADDIAMETER

ITII CARBIDE

+.015 / -.000

made from

ALTINCOATEDEDP#

WIDTH

1-1/2

2-3/4

161/2


#812#1012

#1212

KE

Y

CU

TT

ER

S


69

INTERNAL TOOL INC.


NECK LENGTH6.5MM (.250)

HEAD DIA.+0.4 / -.000 MM(+.015 / -.000)

WIDTH+.012MM - .000 MM(+.0005 - .000)

EX

TR

A L

ON

G 7

0MM

(2-

3/4"

) S

HA

NK

8

10

10

1.0 (.0394)2.0 (.0787)3.0 (.1181)1.0 (.0394)2.0 (.0787)3.0 (.1181)1.0 (.0394)2.0 (.0787)3.0 (.1181)4.0 (.1575)1.0 (.0394)2.0 (.0787)3.0 (.1181)4.0 (.1575)1.0 (.0394)2.0 (.0787)3.0 (.1181)4.0 (.1575)5.0 (.1969)1.0 (.0394)2.0 (.0787)3.0 (.1181)4.0 (.1575)5.0 (.1969)1.0 (.0394)2.0 (.0787)3.0 (.1181)4.0 (.1575)5.0 (.1969)1.0 (.0394)2.0 (.0787)3.0 (.1181)4.0 (.1575)5.0 (.1969)1.0 (.0394)2.0 (.0787)3.0 (.1181)4.0 (.1575)5.0 (.1969)1.0 (.0394)2.0 (.0787)3.0 (.1181)4.0 (.15755.0 (.1969)

8

10

ORDER EDP #

WIDTH # OF

TEETH

SERIES 79

METRICCARBIDE HEAD STEEL SHANK KEY CUTTERS

10MM

12MM

14MM

16MM

18MM

24MM

20MM


SPECIALS, CORNER RADIUS, STAGGER TOOTH AND LEFT HAND ARE AVAILABLE ON REQUEST.

ANY WIDTH CAN BE REDUCED TO YOUR SPECIFICATIONS.

HEADDIAMETER

ITI CARBIDE


79-180079-180579-181079-181579-182079-182579-183079-183579-184079-184579-185079-185579-186079-186579-187079-187579-188079-188579-189079-189579-190079-190579-191079-191579-192079-192579-193079-193579-194079-194579-195079-195579-196079-196579-197079-197579-198079-198579-199079-199579-200079-200579-201079-2015

30MM

32MM

38MM

(.394)

(.472)

(.551)

(.629)

(.708)

(.787)

(.944)

(1.182)

(1.260)

(1.497)

10

12

12

14

16

ALL SHANK DIAMETERS ARE 12.7 MM (.500)

NECK DIA

5 MM (.196)

5 MM (.196)

6 MM (.236)

7 MM (.275)

7 MM (.275)

7 MM (.275)

7 MM (.275)

7 MM (.275)

7 MM (.275)

7 MM (.275)

made from


ALTINCOATED EDP #

STANDARD TEETH

KE

Y

CU

TT

ER

S

16 (.490)

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


NECK LENGTH .250

HEAD DIA.+.015 / -.000

WIDTH+.0005 - .000

EX

TR

A L

ON

G 7

0MM

(2-

3/4"

) S

HA

NK

14

22

.0312 (1/32)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0312 (1/32)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0312 (1/32)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

.2500 (1/4)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

.0312 (1/32)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

.2500 (1/4)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

.2500 (1/4)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

16

20

ORDER EDP #

WIDTH # OF

TEETH

SERIES 107

FINE TOOTHCARBIDE HEAD STEEL SHANK KEY CUTTERS

3/4

7/8

1"

1-1/8

1-1/4

1-1/2


HEADDIAMETER

ITI CARBIDE

107-1000107-1010107-1020107-1030107-1040107-1050107-1060107-1070107-1080107-1090107-1100107-1110107-1120107-1130107-1140107-1150107-1160107-1170107-1180107-1190107-1200107-1210107-1220107-1230107-1240107-1250107-1260107-1270107-1280107-1290107-1300107-1310107-1320107-1330107-1340107-1350107-1360107-1370107-1380

24

28

36

ALL SHANK DIAMETERS 1/2"

NECK DIA

.250

.280

made from

ALTINCOATED EDP #

5/8

1/2

.280

.280

.280

.280

36

.280

.490

36.280

36.490


71

FINE TEETH


KE

Y

CU

TT

ER

S


INTERNAL TOOL INC.


SHANK LENGTH 2-3/4"

HEAD DIA.(+.015 / -.000)

WIDTH(+.0005 - .000)

24

.0312 (1/32)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16

.2500 (1/4)

.0312 (1/32)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

.2500 (1/4)

.0312 (1/32)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

.2500 (1/4)

.0312 (1/32)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

.2500 (1/4)

.0312 (1/32)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

.2500 (1/4)

28

ORDER EDP #

WIDTH # OF

TEETH

SERIES 23

LARGE DIAMETERCARBIDE HEAD STEEL SHANK KEY CUTTERS

2-1/2

2-3/4

3"


HEADDIAMETER

ITI CARBIDE

23-100023-101023-102023-103023-104023-105023-106023-107023-108023-109023-110023-111023-112023-113023-114023-115023-116023-117023-118023-119023-120023-121023-122023-123023-124023-125023-126023-127023-128023-1290

30

ALL SHANK DIAMETERS ARE 3/4"

made from

ALTINCOATED EDP #

2-1/4

2"



28

30

DEPTH OF CUT

DEPTH

OF CUT

.550

.600

.650

.550

.800

72

KE

Y

CU

TT

ER

S


CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


ORDER

EDP#

SHANK

DIA.OVERALL

LENGTH

.250 2-1/2

WIDTH NECK

DIAMETER

NECK

LENGTH

1/4

# OF

TEETH

6

.312 2-1/25/16 8

.375 2-1/23/8 8

.500 3"1/2 10

3/16 6 2-1/277-190077-191077-192077-193077-194077-195077-196077-197077-1980

.018

.029

.039

.046

.056

.068

.086

.103

.120

RETAINING RING CARBIDE KEY CUTTERS

.187

HEAD

DIAMETER


LONG SHANK CARBIDE HEAD KEY CUTTERSSERIES 74 ITI CARBIDE

ORDER

EDP#

TOOL

ID

SHANK

DIA.OVERALL

LENGTH

.250 4"

WIDTH NECK

DIAMETER

NECK

LENGTH

1/4

# OF

TEETH

6

.312 4"5/16 8

.375 4"3/8 8

.500 6"1/2 10

3/16 6 4"74-010074-010574-011074-011574-012074-012574-013074-013574-014074-0145

EK-187-046EK-187-094EK-250-062EK-250-125EK-312-062EK-312-125EK-375-062EK-375-125EK-500-062EK-500-125

.0469

.0938

.0625

.1250

.0625

.1250

.0625

.1250

.0625

.1250

LONG SHANK SOLID CARBIDE KEY CUTTERS

.187

HEAD

DIAMETER


ORDER

EDP#

TOOL

ID

SHANK

DIA.OVERALL

LENGTH

.750 6"

WIDTH NECK

DIAMETER

NECK

LENGTH

# OF

TEETH

10

1.000

6"12

1.250

6"12

.875

6"1/2 14

10 6"74-020074-020574-021074-021574-022074-022574-023074-023574-024074-0245

EK-625-062EK-625-125EK-750-062EK-750-125EK-875-062EK-875-125EK-100-062EK-100-125EK-125-062EK-125-125

.0625

.1250

.0625

.1250

.0625

.1250

.0625

.1250

.0625

.1250

.625

HEAD

DIAMETER

1/2

1/2

1/2

1/2

SPECIAL WIDTHS, CORNER RADIUS, STAGGER TOOTH AND LEFT HAND ARE AVAILABLE ON REQUEST.

APPLICATION : ALL CLEARANCE ANGLES, RAKE ANGLES AND DISH CLEARANCE'S ARESPECIFICALY ENGINEERED AND DESIGNED FOR CUTTING RETAINING RING GROOVES

HEAD DIA.+.000 / -.005


WIDTH+.0005 / - .000

OVERALLLENGTH

ORDER

EDP#

SERIES 90

60°

INCLUDED

ANGLE

# OF

TEETH WIDTH

OF CUT

90°

SINGLE ANGLE CUTTERS

MAJOR DIA.+.015 / -.000

NECK LENGTH 1/4"

60° OR 90°INCLUDED ANGLE

WIDTH OF CUT+.005 / -.000

90-1100

90-1105

90-1110

90-1115

90-1120

90-1125

SA-500-60

SA-625-60

SA-750-60

SA-500-90

SA-625-90

SA-750-90

1/2

5/8

3/4

1/2

5/8

3/4

.125

.187

.250

.125

.187

.250

4

6

6

4

6

6

MAJOR

DIA.

TOOL

IDENTIFICATION

ITI CARBIDE

2-3/4" EXTRALONG SHANK

NECK DIAMETER 1/4"

MINOR DIA.+.015 / -.000

MINOR

DIA.

.356

.408

.461

.250

.250

.250

CARBIDE HEAD ON HARDENED STEEL SHANK

.094

.125

.125

.125

.150

.200

.200

.250

.250

3/163/161/41/45/163/83/83/83/8

.094

.094

.125

.125

.150

.150

.200

.200

.250

.250

1/41/43/83/81/21/25/85/83/4

3/4

.280

.280

.250

.250

.280

.280

.280

.280

.280

.280

1/41/41/41/41/41/41/41/41/41/4

made from

made from

made from

made from

ALTINCOATED EDP #

77-1900-C77-1910-C77-1920-C77-1930-C77-1940-C77-1950-C77-1960-C77-1970-C77-1980-C

73

KE

Y

CU

TT

ER

S

OVER 3000 TOOLS NOW AVAILABLE

INTERNAL TOOL INC.


SERIES 78

CARBIDE KEY CUTTERS

CARBIDE HEAD 3/8" STEEL SHANK KEY CUTTERSSHANK

DIA.

SHANK

LENGTH NECK

DIA.

NECK

LENGTH

# OF

TEETH

3/8 2-3/4

3/8

10

.0312

.0469

.0625

.0781

.0938

.1250

.1562

.0312

.0469

.0625

.0781

.0938

.1250

.1562

.1875

.0312

.0469

.0625

.0781

.0938

.1250

.1562

.1875

.0312

.0469

.0625

.0781

.0938

.1250

ORDER EDP # WIDTH

1/2

78-087078-087578-088078-088578-089078-089578-089778-090078-090278-090578-090778-091078-091578-091778-091878-092078-092278-092578-092778-093078-093578-093778-093978-094578-095078-095578-096078-096578-0970

3/8

5/8

3/4

2-3/4

2-3/4

10

10

DESIGNED TO BE USED IN SMALLMILLS OR AS LIVE TOOLING

APPLICATION :

HEADDIAMETER

ITI CARBIDE

SERIES 76

SOLID CARBIDE 1/4" SHANK KEY CUTTERSSHANK

DIA.

CUTTER

DIA.SHANK

LENGTH NECK

DIA.

NECK

LENGTH

# OF

TEETH

.625 2"10

.375

SC-375-031

SC-375-063

SC-375-094

SC-375-125

SC-500-031

SC-500-063

SC-500-094

SC-500-125

SC-625-031

SC-625-063

SC-625-094

SC-625-125

.0312

.0625

.0938

.1250

.0312

.0625

.0938

.1250

.0312

.0625

.0938

.1250

.240

.240

.240

.240

.240

.240

.240

.240

.240

.240

.240

.240

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

ORDER EDP #

WIDTH

3/876-9000

76-9010

76-9015

76-9020

76-9025

76-9030

76-9035

76-9040

76-9045

76-9050

76-9055

76-9060

1/4

1/2

5/8

.500

2"

2"

8

10

DESIGNED TO BE USED IN SMALLMILLS OR AS LIVE TOOLING

APPLICATION :

HEADDIAMETER

ITI CARBIDE

TOOL

IDENTIFICATION

1/4

1/4

SPECIAL WIDTHS, CORNER RADIUS, STAGGER TOOTH AND LEFT HAND ARE AVAILABLE ON REQUEST.

+.010 / -.000

+.015 / -.000

made from

made from

78-0870-C78-0875-C78-0880-C78-0885-C78-0890-C78-0895-C78-0897-C78-0900-C78-0902-C78-0905-C78-0907-C78-0910-C78-0915-C78-0917-C78-0918-C78-0920-C78-0922-C78-0925-C78-0927-C78-0930-C78-0935-C78-0937-C78-0939-C78-0945-C78-0950-C78-0955-C78-0960-C78-0965-C78-0970-C

1" 3/8 12 2-3/4

.250 1/4

.250 1/4

.250 1/4

.250 1/4

ALTINCOATED EDP #

74

SPECIAL WIDTHS ARE AVAILABLE ON REQUEST.

KE

Y

CU

TT

ER

S

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


FULL RADIUS KEY CUTTERS

75

ORDER

EDP#

SHANK

DIA.

SERIES 80

HEAD

DIA.

SHANK

LENGTH

2-3/4

NECK

DIA.

NECK

LENGTH

.250 1/4 1/2

# OF

TEETH

6

1" 2-3/4.280 1/4 1/2 8

2-3/4.280 1/4 1/2 6

2-3/4.280 1/4 1/2 8

FULL RADIUS KEY CUTTERS

WIDTH+.0005 / -.000

HEAD DIA +.015 / -.000

NECK LENGTH +.030 / -.000

RADIUS CARBIDE KEY CUTTERS

80-109080-109580-110080-110480-110580-111080-111280-111480-111580-111780-112080-112580-112780-112880-113080-113280-113580-114080-114280-114480-114580-115080-115580-116080-116580-1170

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

ITI CARBIDE



THEIR SPECIAL IS OUR STANDARD


made from

1/2

5/8

3/4

1-1/4 1/4.280 1/2 10 2-3/4

ORDER

EDP#SHANK

DIA.

HEAD

DIA.

OVERAL

LENGTH

2-1/2

WIDTH NECK

DIA.

NECK

LENGTH

.094 3/16 3/16

# OF

TEETH

4

3/8 2-1/2.200 3/8 3/8 6

2-1/2.125 1/4 1/4 4

2-1/2.150 5/16 5/16 6

80-500080-501080-502080-503080-504080-505080-506080-507080-508080-509080-600080-601080-602080-603080-604080-605080-606080-607080-608080-609080-700080-7010

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)


3/16

1/4

5/16

1/2 3/8.250 1/2 6 3"

SOLID CARBIDE

RADIUS

SIZE

.0156

.0234

.0312

.0156

.0234

.0312

.0390

.0469

.0156

.0234

.0312

.0390

.0469

.0625

.0156

.0234

.0312

.0469

.0625

.0312

.0469

.0625

RADIUS

SIZE

.0156

.0234

.0312

.0395

.0469

.0625

.0156

.0234

.0312

.0395

.0469

.0625

.0156

.0234

.0312

.0395

.0469

.0625

.0156

.0234

.0312

.0469

.0625

.0312

.0469

.0625

WIDTH

KE

Y

CU

TT

ER

S

HEAD DIA +.000 / -.005

WIDTH+.0005 / -.000


NECK DIA+.000 / -.005

INTERNAL TOOL INC.



RADIUS

SIZE

SHANK

DIA. HEAD

DIA.

OVERALL

LENGTH WIDTH NECK

DIA.

NECK

LENGTH

# OF

TEETH

3/8

101-1000101-1020101-1030101-1040101-1050101-1060101-1070101-1080101-1090101-1100101-1110101-1120101-1130101-1140101-1150101-1160101-1170101-1180101-1190101-1200101-1210101-1220101-1230101-1240101-1250101-1260101-1270101-1280101-1290101-1300101-1310101-1320101-1330101-1340101-1350101-1360101-1370101-1380101-1390101-1400101-1410101-1420101-1430101-1440

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.250 (1/4)


1/4

5/16

1/2

CORNER RADIUS KEY CUTTERSSOLID CARBIDE

.005

.010

.015

.005

.010

.015

.005

.010

.015

.030

.005

.010

.015

.005

.010

.015

.005

.010

.015

.030

.005

.010

.015

.005

.010

.015

.005

.010

.015

.030

.005

.010

.015

.005

.010

.015

.005

.010

.015

.030

.005

.010

.015

.030

ORDER

EDP#


ALTINCOATED EDP #

.125

.150

.200

.250

1/4

5/16

3/8

3/8

1/4

5/16

3/8

1/2

6

8

8

10

2-1/2

2-1/2

2-1/2

3"

76

KE

Y

CU

TT

ER

S


NECK

LENGTH

NECK

DIA.

WIDTH

CORNER

RAD'S

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


RADIUS

SIZE

SHANK

DIA. HEAD

DIA.

SHANK

LENGTH WIDTH NECK

DIA.

NECK

LENGTH

# OF

TEETH

1"

102-1000102-1020102-1030102-1040102-1050102-1060102-1070102-1080102-1090102-1100102-1110102-1120102-1130102-1140102-1150102-1160102-1170102-1180102-1190102-1200102-1210102-1220102-1230102-1240102-1250102-1260102-1270102-1280102-1290102-1300102-1310102-1320102-1330102-1340102-1350102-1360102-1370102-1380102-1390102-1400102-1410102-1420102-1430102-1440

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.250 (1/4)


5/8

3/4

1-1/4

CORNER RADIUS KEY CUTTERSCARBIDE HEAD STEEL SHANK

.005

.010

.015

.005

.010

.015

.005

.010

.015

.030

.005

.010

.015

.005

.010

.015

.005

.010

.015

.030

.005

.010

.015

.005

.010

.015

.005

.010

.015

.030

.005

.010

.015

.005

.010

.015

.005

.010

.015

.030

.005

.010

.015

.030

ORDER

EDP#


ALTINCOATED EDP #

.280

.280

.280

.280

.380

1/4

1/4

1/4

1/4

1/4

1/2

1/2

1/2

1/2

1/2

10

10

12

14

14

2-3/4

2-3/4

2-3/4

2-3/4

2-3/4


77

KE

Y

CU

TT

ER

S


INTERNAL TOOL INC.


NECK LENGTH

HEAD DIA.+.015 / -.000

WIDTH+.0005 - .000

SH

AN

K

LE

NG

TH

8

8

8

10

10

10

12

12

12

14

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0938 (3/32)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

.2500 (1/4)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

.2500 (1/4)

.3125 (5/16)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

.2188 (7/32)

.2500 (1/4)

.3125 (5/16)

.3750 (3/8)

.1250 (1/8)

.1875 (3/16)

.2188 (7/32)

.2500 (1/4)

.3125 (5/16)

.3750 (3/8)

.1250 (1/8)

.1875 (3/16)

.2500 (1/4)

.3125 (5/16)

.3750 (3/8)

.1250 (1/8)

.1875 (3/16)

.2188 (7/32)

.2500 (1/4)

.3125 (5/16)

.3750 (3/8)

.1250 (1/8)

.1875 (3/16)

.2500 (1/4)

.3125 (5/16)

.3750 (3/8)

.2500 (1/4)

.3125 (5/16)

.3750 (3/8)

ORDER EDP #

WIDTH # OF

TEETH

STAGGERD TOOTHCARBIDE HEAD STEEL SHANK KEY CUTTERS

3/4

7/8

1"

1-1/8

1-1/4

1-1/2

HEADDIAMETER

103-1000103-1010103-1020103-1030103-1040103-1050103-1060103-1070103-1080103-1090103-1100103-1110103-1120103-1130103-1140103-1150103-1160103-1170103-1180103-1190103-1200103-1210103-1220103-1230103-1240103-1250103-1260103-1270103-1280103-1290103-1300103-1310103-1320103-1330103-1340103-1350103-1360103-1370103-1380103-1390103-1400103-1410103-1420103-1430103-1440

ALL SHANK DIAMETERS 1/2"

NECK DIA

ALTINCOATED EDP #

5/8

1/2103-1000-C103-1010-C103-1020-C103-1030-C103-1040-C103-1050-C103-1060-C103-1070-C103-1080-C103-1090-C103-1100-C103-1110-C103-1120-C103-1130-C103-1140-C103-1150-C103-1160-C103-1170-C103-1180-C103-1190-C103-1200-C103-1210-C103-1220-C103-1230-C103-1240-C103-1250-C103-1260-C103-1270-C103-1280-C103-1290-C103-1300-C103-1310-C103-1320-C103-1330-C103-1340-C103-1350-C103-1360-C103-1370-C103-1380-C103-1390-C103-1400-C103-1410-C103-1420-C103-1430-C103-1430-C

1-3/8

SERIES 103

STD #

#204#304#404#305#405#505#605

#406#506#606#806

#507#607#707#807

#608#708#808#1008#1208

#609

#610#710#810#1010#1210

#811#1011#1211#812#1012#1212

.135

.165

.190

.195

.225

.250

.250

.280

.230

.250

.280

.280

.490

.280

.250

.280

.280

.345

.490

.490

.280

.280

.340

.345

.400

.400

.280

.280

.490

.490

.490

.280

.320

.380

.379

.437

.430

.280

.400

.400

.470

.470

.430

.460

.490

NECK LENGTH

1/81/81/81/81/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/4

SHANK

LENGTH

2-3/4

2-3/4

2-3/4

2-3/4

2-3/4

2-3/4

2-3/4

2-3/4

2"SOLID

CARBIDE

2"SOLID

CARBIDE


78

KE

Y

CU

TT

ER

S



CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


WID

TH

NE

CK

DIA

ME

TER

FU

LL R

AD

IUS

?

Quo

te in

qua

nite

s of

?T

HE

MO

RE

YO

U B

UY

TH

E C

HE

AP

ER

TH

EY

GE

T

S

HA

NK

D

IAM

ET

ER

SH

AN

K

LE

NG

TH

If

no

t su

re l

ea

ve b

lan

k

MA

JOR

DIA

ME

TE

R

INT

ER

NA

L T

OO

L

DR

AW

N B

Y:

RE

V:

TO

OL

NU

MB

ER

:

DA

TE:

TO

LER

AN

CE

UN

LES

SO

THE

RW

ISE

SP

EC

IFIE

D

.X =

+

/- 1

/32

.XX

= +

/- .0

10.X

XX

= +

/- .

002

.XX

XX

= /

- .0

005

AN

GLE

S +

/- 0

.15°

RE

VIS

ION

S:

YO

UR

CO

MP

AN

Y N

AM

E:

CO

NT

AC

T :

PH

ON

E:

FA

X:

YO

UR

DIS

TR

IBU

TO

R:

QU

AN

ITY

:

NE

CK

LE

NG

TH

CO

RN

ER

RA

DIU

S

O

UT

SID

E -

SIZ

E?

CO

RN

ER

RA

DIU

S I

NS

IDE

- S

IZE

?

INT

ER

NA

L

Sim

ply

mak

e a

copy

fill

in th

e in

form

atio

n be

low

and

fax

or e

mai

l to

us.

fa

x #

909-

392-

2627

we

will

quo

te a

s so

on a

s po

ssib

le.

IN

FO

@in

tern

alto

ol.c

omA

ny d

imen

sion

you

r not

sur

e of

leav

e bl

ank

we

will

quo

te s

tand

ard.

SPECIAL KEY CUTTERS

KE

Y

CU

TT

ER

S


INTERNAL TOOL INC.


ORDER

EDP# TOOL

IDENTIFICATION

SHANK

DIA.

SERIES 84

HEAD

DIA.

SHANK

LENGTH

1/2 2-3/4

RADIUS

SIZE

NECK

DIA. NECK

LENGTH

.280 1/4 1/2

# OF

TEETH

6

3/4

2-3/4.280 1/4 1/2 65/8

2-3/4.280 1/4 1/2 8

HEAD

WIDTH

ORDER

EDP#

SHANK

DIA.

SERIES 82

HEAD

DIA.SHANK

LENGTH

1/2 2-3/4

RADIUS

SIZE

NECK

DIA.

NECK

LENGTH

.280 1/4 1/2

# OF

TEETH

6

3/4

2-3/4.280 1/4 1/2 65/8

2-3/4.380 1/4 1/2 8

HEAD

WIDTH


DOUBLE CONCAVE RADIUS CUTTERS

CONCAVE RADIUS KEY CUTTERS

WIDTH+.0005 / -.000


HEAD DIA +.015 / -.000

WIDTH+.0005 / -.000


84-1100

84-1105

84-1110

84-1115

84-1120

84-1125

84-1130

84-1135

84-1140

DR-500-010

DR-500-015

DR-500-020

DR-625-031

DR-625-046

DR-625-062

DR-750-080

DR-750-094

DR-750-125

.010

.015

.020

.031

.046

.062

.080

.093

.125

.115

.125

.135

.155

.185

.215

.255

.280

.345

82-1100

82-1120

82-1130

82-1140

82-1150

CO-500-031

CO-625-046

CO-625-062

CO-750-094

CO-750-125

.031

.046

.062

.093

.125

3/16

7/32

1/4

5/16

3/8

TOOL

IDENTIFICATION

ITI CARBIDE

ITI CARBIDE


HEAD DIA +.015 / -.000




made from

made from

ITC CARBIDE: MAXIMUM SHEAR WITH MINIMUM WEAR

5 FLUTE

DEPTH OF CUT

OVERALL LENGTH 3-3/4"

EDPNUMBER

81-105081-106081-107081-108081-109081-1100

.044

.088

.134

.182

.289

.500

ANGLEper side

5°

5°10°15°20°30°45° 20°

ITI CARBIDE

SPECIAL ANGLES AVAILABLE ON REQUEST

SHANKDIAMETER 3/4"

10°

30°

45°

15°

HEADDIAMETER 1-1/4"

DEPTH OF CUT

1/4" TIPDIAMETER

SERIES 81

ANGLERSCARBIDE HEAD ON HARDENED STEEL SHANK

APPLICATION : MILLING ANGLES

RIGHT HANDCENTER CUTTING

made from

80

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.

ITI Carbide Cutting Tools 81OVER 3000 TOOLS NOW AVAILABLE

4

4

4

6

.250 (1/4)

.375 (3/8)

.500 (1/2)

.625 (5/8)

.750 (3/4)

.250 (1/4)

.375 (3/8)

.500 (1/2)

.625 (5/8)

.750 (3/4)

.250 (1/4)

.375 (3/8)

.500 (1/2)

.625 (5/8)

.750 (3/4)

.250 (1/4)

.375 (3/8)

.500 (1/2)

.625 (5/8)

.750 (3/4)1.00 (1")

ORDER EDP #

WIDTH # OF

TEETH

PUSH-PULLSOLID CARBIDE CUTTERS

3/4

1"

HEADDIAMETER

106-1000106-1020106-1040106-1060106-1080106-1100106-1120106-1140106-1160106-1180106-1200106-1220106-1240106-1260106-1280106-1300106-1320106-1340106-1360106-1380106-1400

NECK DIA

ALTINCOATED EDP #

5/8

1/2

106-1000-C106-1020-C106-1040-C106-1060-C106-1080-C106-1100-C106-1120-C106-1140-C106-1160-C106-1180-C106-1200-C106-1220-C106-1240-C106-1260-C106-1280-C106-1300-C106-1320-C106-1340-C106-1360-C106-1380-C106-1400-C

SERIES 106

.250

.312

.375

.500

NECK LENGTH

1/2

1/2

3/4

3/4

OVERALL

LENGTH

4"

4"

4"

6"


APPLICATION : CUTS ONBOTH SIDES AND DIAMETER

WIDTH+.005 / -.000


NECK DIAMETER+.000 / -.005

HEAD DIAMETER+.000 / -.005

BOTH SIDES ANDDIAMETER CUT

C' BORE BOTH SIDESOF YOUR PART

HEAD ANDSHANK ARESAME DIAMETER

RELIEF CUTS UP TO 1" WIDE

SPIRAL FLUTE 30° HELIX

INTERNAL TOOL INC.


DOVETAIL CUTTERS

SERIES 86

30°

ANGLE

PER SIDE

45°

DOVETAIL CUTTERS WITH STEEL SHANK

EXTRA LONG 2-3/4" SHANK HEAD DIA +.015 / -.000

86-120086-120586-121086-121586-122086-1225

3/81/23/43/81/23/4

.160

.210

.350

.125

.185

.250

.187

.250

.312

.125

.156

.250

565445

1/21/21/21/21/21/2

3-1/83-1/83-1/83-1/83-1/83-1/8

1/41/41/41/41/41/4

ORDER

EDP#SHANK

DIA.

HEAD

DIAMETER O.A.L.

LENGTH

NECK

DIAMETER

NECK

LENGTH

# OF

TEETHWIDTH

OF CUT

ITI CARBIDE

NEED A SPECIAL SIZE ? MAKE A COPY, FILL IN THE INFORMATION, AND FAX IT TO US FOR A QUOTE .

.070

.093

.103

.125

.139

.187

.210

.250

.275

.375

24° O-RING DOVETAIL CUTTERS SHANK DIA.x LGTH

BOTTOM RADIUS

EDPNUMBER

O-RING SIZE

DEPTH OF CUT

51-800051-800551-801051-801551-802051-802551-803051-803551-804051-8045

TOP RADIUS

.062

.086

.094

.130

.125

.190

.189

.250

.249

.338

.051

.075

.082

.102

.112

.154

.172

.212

.232

.317

.015

.015

.015

.031

.031

.031

.031

.062

.062

.094

.005

.010

.010

.010

.010

.015

.015

.015

.015

.020

3/16 x 2.53/16 x 2.53/16 x 2.51/4 x 2.51/4 x 2.55/16 x 2.55/16 x 2.53/8 x 2.53/8 x 2.51/2 x 3.0

MINOR

DIA.

DEPTH

OF CUT

24°

BOTTOM

RADIUS

TOP

RADIUS

MAJOR DIA.

MAJOR DIA.

.086

.126

.140

.177

.180

.279

.293

.356

.374

.497

SERIES 51APPLICATION :

ITI CARBIDE

WIDTH OF CUT


HEAD DIA +.000 / -.010

5° ANGLE

ORDER

EDP#SHANK

DIA.

HEAD

DIAMETER O.A.L.

LENGTH

3/161/45/163/81/25/8

NECK

DIAMETER

NECK

LENGTH

# OF

TEETH

WIDTH

OF CUT

86-010086-010586-011086-011586-012086-0125

.100

.135

.175

.210

.300

.405

3/161/45/163/81/25/8

444466

2-1/22-1/22-1/22-1/23"3-1/2

.500

.625

.750

.8751.0001.250

1/41/41/41/41/41/4

DOVETAIL CUTTERS 5° PER SIDE 10° INCLUDED

ORDER

EDP#

SHANK

DIA. HEAD

DIAMETER

O.A.L.

LENGTH

3/161/45/163/81/25/8

NECK

DIAMETER

NECK

LENGTH

# OF

TEETH

WIDTH

OF CUT

86-020086-020586-021086-021586-022086-0225

.090

.120

.140

.175

.250

.350

3/161/45/163/81/25/8

444466

2-1/22-1/22-1/22-1/23"3-1/2

1/41/41/41/41/41/4

.250

.350

.450

.550

.650

.750

WIDTH OF CUT


HEAD DIA +.000 / -.010

10° ANGLE

ITI CARBIDE

ITI CARBIDE

INTERNAL

INTERNAL

SERIES 86

SERIES 86


ITI CARBIDE: UN-MATCHED BY ANY OTHER

SHANK DIA.

USED TO CUT-MILL 24° O-RING DOVETAILS.THEY CUT WITH BOTH TOP & BOTTOM RADIUS.

TURNING STYLE O'RING TOOLS ARE ON PAGE 23

ALTINCOATED EDP#

86-1200-C86-1205-C86-1210-C86-1215-C86-1220-C86-1225-C

ALTINCOATED EDP#

86-0100-C86-0105-C86-0110-C86-0115-C86-0120-C86-0125-C

ALTINCOATED EDP#

86-0200-C86-0205-C86-0210-C86-0215-C86-0220-C86-0225-C


made from

made from

made from

made from

MINOR DIA.

DO

VE

TA

IL

CU

TT

ER

S

SOLID CARBIDE DOVETAIL CUTTERS

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


ORDER

EDP#

SHANK

DIA.

SERIES 86

HEAD

DIAMETER

O.A.L.

LENGTH

3/161/45/163/81/25/8

NECK

DIAMETER

NECK

LENGTH

# OF

TEETH

WIDTH

OF CUT


DOVETAIL CUTTERS

86-100086-100586-101086-101586-102086-1025

ORDER

EDP#

SHANK

DIA.

HEAD

DIAMETER O.A.L.

LENGTH NECK

DIAMETER NECK

LENGTH

# OF

TEETH WIDTH

OF CUT

ORDER

EDP#SHANK

DIA.

HEAD

DIAMETER O.A.L.

LENGTH NECK

DIAMETER

NECK

LENGTH

# OF

TEETH

WIDTH

OF CUT

1/83/161/45/163/81/25/83/4

1/83/161/45/163/81/25/83/47/81"

.110

.150

.200

.230

.320

.345

.062

.090

.125

.125

.160

.200

.260

.311

.054

.080

.100

.160

.180

.250

.315

.380

1/83/161/45/163/81/25/83/4

33445666

2"2-1/22-1/22-1/22-1/23"3-1/24"

3/161/41/41/41/41/41/41/4

86-109586-110086-110586-110786-111086-111586-111786-1118

86-111986-112086-112586-112786-113086-113586-113786-113986-114286-1144

.062

.090

.115

.150

.125

.185

.245

.290

.335

.360

.032

.045

.062

.080

.120

.150

.190

.230

.270

.320

1/83/161/45/163/81/25/83/47/81"

3334446666

2"2-1/22-1/22-1/22-1/23"3-1/24"4"4"

3/161/45/163/81/25/8

444466

2-1/22-1/22-1/22-1/23"3-1/2

1/41/41/41/41/41/4

3/161/41/41/41/41/41/41/41/41/4

.125

.160

.190

.250

.320

.500



WIDTH OF CUT

30° ANGLE

HEAD DIA +.000 / -.010

HEAD DIA +.000 / -.010

ORDER

EDP#

SHANK

DIA.

HEAD

DIAMETER O.A.L.

LENGTH NECK

DIAMETER

NECK

LENGTH

# OF

TEETH WIDTH

OF CUT

3/161/45/163/81/25/8

86-116086-116586-117086-117586-118086-1185

.070

.080

.095

.100

.170

.180

.032

.048

.062

.078

.094

.125

3/161/45/163/81/25/8

334445

2-1/22-1/22-1/22-1/23"3-1/2

1/41/41/41/41/41/4


HEAD DIA +.000 / -.010

15° ANGLE

WIDTH OF CUT

45° ANGLE

WIDTH OF CUT

WIDTH OF CUT

HEAD DIA +.000 / -.010

60° ANGLE

ITI CARBIDE

ITI CARBIDE

ITI CARBIDE

ITI CARBIDE

INTERNAL

INTERNAL

INTERNAL

INTERNAL

SERIES 86

SERIES 86

SERIES 86


ORDER

EDP#

SHANK

DIA. HEAD

DIAMETER

O.A.L.

LENGTH NECK

DIAMETER NECK

LENGTH

# OF

TEETH WIDTH

OF CUT

1/83/161/45/163/81/25/8

86-125086-125586-126086-126586-127086-127586-1280

.062

.090

.125

.125

.160

.200

.260

.085

.130

.170

.255

.305

.405

.500

1/83/161/45/163/81/25/8

3334566

2"2-1/22-1/22-1/22-1/23"3-1/2

3/161/41/41/41/41/41/4


HEAD DIA +.000 / -.010

20° ANGLE

WIDTH OF CUT

ITI CARBIDE

INTERNAL

SERIES 86

ALTINCOATED EDP#

ALTINCOATED EDP#

86-1000-C86-1005-C86-1010-C86-1015-C86-1020-C86-1025-C

ALTINCOATED EDP#

ALTINCOATED EDP#

ALTINCOATED EDP#

86-1250-C86-1255-C86-1260-C86-1265-C86-1270-C86-1275-C86-1280-C

86-1095-C86-1100-C86-1105-C86-1107-C86-1110-C86-1115-C86-1117-C86-1118-C

86-1119-C86-1120-C86-1125-C86-1127-C86-1130-C86-1135-C86-1137-C86-1139-C86-1142-C86-1144-C

86-1160-C86-1165-C86-1170-C86-1175-C86-1180-C86-1185-C






made from

made from

made from

made from

made from

DO

VE

TA

IL

CU

TT

ER

S


INTERNAL TOOL INC.


ORDER

EDP#SHANK

DIA.

HEAD

DIAMETER O.A.L.

LENGTH

NECK

DIAMETER

NECK

LENGTH

# OF

TEETH

WIDTH

OF CUT

1/8

3/16

1/4

5/16

3/8

1/2

5/8

3/4

.062

.090

.125

.125

.160

.200

.260

.311

.054

.080

.100

.160

.180

.250

.315

.380

1/8

3/16

1/4

5/16

3/8

1/2

5/8

3/4

3

3

4

4

5

6

6

6

2"

2-1/2

2-1/2

2-1/2

2-1/2

3"

3-1/2

4"

3/16

1/4

1/4

1/4

1/4

1/4

1/4

1/4

86-300086-300586-301086-301586-302086-302586-303086-303586-304086-304586-305086-305586-306086-306586-307086-307586-308086-308586-309086-309586-400086-400586-401086-401586-402086-402586-403086-4035


WIDTH OF CUT

30° ANGLE

HEAD DIA +.000 / -.015

ITI CARBIDE

INTERNAL

SERIES 86

ALTINCOATED EDP#

DOVETAIL CUTTERS WITH A TIP RADIUS 30° PER SIDE 60° INCLUDED

made from

RADIUS

SIZE

.005

.010

.015

.005

.010

.015

.005

.010

.015

.005

.010

.015

.005

.010

.015

.030

.005

.010

.015

.030

.005

.010

.015

.030

.005

.010

.015

.030

ORDER

EDP#

SHANK

DIA.

SERIES 86

HEAD

DIAMETER

O.A.L.

LENGTH

3/16

1/4

5/16

3/8

1/2

5/8

NECK

DIAMETER

NECK

LENGTH

# OF

TEETH

WIDTH

OF CUT

DOVETAIL CUTTERS WITH A RADIUS

86-250086-250586-251086-251586-252086-253086-253586-254086-254586-255086-255586-256086-256586-257086-257586-258086-258586-259086-259586-2600

.110

.150

.200

.230

.320

.345

3/16

1/4

5/16

3/8

1/2

5/8

4

4

4

4

6

6

2-1/2

2-1/2

2-1/2

2-1/2

3"

3-1/2

1/4

1/4

1/4

1/4

1/4

1/4

.125

.160

.190

.250

.320

.500


HEAD DIA +.000 / -.015

15° ANGLE WIDTH OF CUT

ITI CARBIDE

INTERNAL ALTINCOATED EDP#

DOVETAIL CUTTERSWITH A TIP RADIUS 15° PER SIDE 30° INCLUDED

made from

RADIUS

SIZE

.005

.010

.015

.005

.010

.015

.005

.010

.015

.005

.010

.015

.005

.010

.015

.030

.005

.010

.015

.030

86-2500-C86-2505-C86-2510-C86-2515-C86-2520-C86-2530-C86-2535-C86-2540-C86-2545-C86-2550-C86-2555-C86-2560-C86-2565-C86-2570-C86-2575-C86-2580-C86-2585-C86-2590-C86-2595-C86-2600-C

86-3000-C86-3005-C86-3010-C86-3015-C86-3020-C86-3025-C86-3030-C86-3035-C86-3040-C86-3045-C86-3050-C86-3055-C86-3060-C86-3065-C86-3070-C86-3075-C86-3080-C86-3085-C86-3090-C86-3095-C86-4000-C86-4005-C86-4010-C86-4015-C86-4020-C86-4025-C86-4030-C86-4035-C

84

DO

VE

TA

IL

CU

TT

ER

S


RADIUS

RADIUS


CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


ORDER

EDP#

SHANK

DIA.

HEAD

DIAMETER

O.A.L.

LENGTH

NECK

DIAMETER

NECK

LENGTH

# OF

TEETH

WIDTH

OF CUT

1/8

3/16

1/4

5/16

3/8

1/2

5/8

3/4

7/8

1"

86-500086-500586-501086-501586-502086-502586-503086-503586-504086-504586-505086-505586-506086-506586-507086-507586-508086-508586-509086-509586-600086-600586-601086-601586-602086-602586-603086-603586-604086-604586-605086-605586-606086-606586-607086-607586-608086-608586-609086-609586-700086-700586-7010

.062

.090

.115

.150

.125

.185

.245

.290

.335

.360

1/8

3/16

1/4

5/16

3/8

1/2

5/8

3/4

7/8

1"

3

3

3

4

4

4

6

6

6

6

2"

2-1/2

2-1/2

2-1/2

2-1/2

3"

3-1/2

4"

4"

4"

3/16

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4


HEAD DIA +.000 / -.015

45° ANGLE

WIDTH OF CUT

ITI CARBIDE

INTERNAL

SERIES 86

ALTINCOATED EDP#

DOVETAIL CUTTERSWITH A TIP RADIUS 45° PER SIDE 90° INCLUDED

made from

.005

.010

.015

.005

.010

.015

.005

.010

.015

.030

.005

.010

.015

.030

.005

.010

.015

.030

.005

.010

.015

.030

.060

.005

.010

.015

.030

.060

.005

.010

.015

.030

.060

.005

.010

.015

.030

.060

.005

.010

.015

.030

.060


.032

.045

.062

.080

.120

.150

.190

.230

.270

.320

RADIUS

SIZE

85

DOVETAIL CUTTERS WITH A RADIUS

DO

VE

TA

IL

CU

TT

ER

S


RADIUS


INTERNAL TOOL INC.


CA

RB

IDE

DO

VE

TA

IL C

UT

TE

RS

MA

DE

TO

YO

UR

SP

EC

IFIC

AT

ION

S

Neck diam

eterH

ead Diam

eter

Sim

ply make a copy

fill in the information below

and fax or email to us. fax # 909-392-2627

we w

ill quote as soon as possible. INF

O@

internaltool.comA

ny dimension your not sure of leave blank w

e will quote standard

Shank D

iameter ( if not sure leave blank)

Com

pany name

Contact

Phone

Fax

Your distributor

Corner radius

what size ?

Quote in quanites of ?

TH

E M

OR

E Y

OU

BU

YT

HE

CH

EA

PE

R T

HE

Y G

ET

Head w

idthA

ngle

Overall length

INT

ER

NA

L

INT

ER

NA

L T

OO

LT

OLE

RA

NC

E U

NLE

SS

OTH

ER

WIS

E S

PE

CIFIE

D

.X =

+/- 1/32

.XX

= +

/- .010.X

XX

= +

/- .002.X

XX

X =

/- .0005A

NG

LES

+/- 0.15°

RE

VIS

ION

S:

DR

AW

N B

Y:

RE

V:

TO

OL N

UM

BE

R:

DA

TE:

SPECIAL DOVETAIL CUTTERS

ITI CARBIDE: SPECIALLY BLENDED FOR OPTIMUM PERFORMANCE

DO

VE

TA

IL

CU

TT

ER

S

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


ORDER

EDP#

SHANK

DIA.

HEAD

DIAMETER O.A.L.

LENGTH

NECK

DIAMETER

NECK

LENGTH

WIDTH

OF CUT

1/8

3/16

1/4

5/16

3/8

1/2

.075

.115

.155

.200

.240

.320

.107

.160

.213

.266

.325

.425

2-1/2

2-1/2

3"

3"

3"

3"

4"

29-4000

29-4005

29-4010

29-4015

29-4020

29-4025

29-4030

29-4035

29-4040

29-4045

29-4050

29-4055

29-4060

29-4065

29-4070

29-4075

29-4080

29-4085

29-4090

29-4095

29-4100

29-4105

29-4110

29-4115

29-4120

29-4125

29-4130

29-4135

29-4140

29-4145

29-4150

29-4155

29-4160

29-4165

29-4170

29-4175

29-4180

29-4185

29-4190

29-4195

29-4200

29-4205

29-4210

ITI CARBIDESERIES 29

ALTINCOATED EDP#

LOLLI POPS ....UNDERCUTTING ENDMILLS 270° CUT 10° HELIXmade from

.250

.375

.500

.750

1.000

1.250

1.500

.250

.375

.500

.750

1.000

1.250

1.500

.250

.375

.500

.750

1.000

1.250

1.500

2.000

.250

.375

.500

1.000

1.250

1.500

2.000

.250

.375

.500

.750

1.000

1.250

1.500

2.000

.375

.500

1.000

1.250

1.500

2.000

29-4000-C

29-4005-C

29-4010-C

29-4015-C

29-4020-C

29-4025-C

29-4030-C

29-4035-C

29-4040-C

29-4045-C

29-4050-C

29-4055-C

29-4060-C

29-4065-C

29-4070-C

29-4075-C

29-4080-C

29-4085-C

29-4090-C

29-4095-C

29-4100-C

29-4105-C

29-4110-C

29-4115-C

29-4120-C

29-4125-C

29-4130-C

29-4135-C

29-4140-C

29-4145-C

29-4150-C

29-4155-C

29-4160-C

29-4165-C

29-4170-C

29-4175-C

29-4180-C

29-4185-C

29-4190-C

29-4195-C

29-4200-C

29-4205-C

29-4210-C

1/8

3/16

1/4

5/16

3/8

1/2

1/2

THEIR SPECIAL IS OUR STANDARD

+.000 /-.002 +.015 +.000 /-.005 +.030

HEAD

DIAMETER

+.000 / -.002

WIDTH

OF CUT

NECK

DIAMETER NECK

LENGTH

SHANK

DIA.

O.A.L.

LENGTH

APPLICATION :

AVAILABLE IN UN-COATED OR ALTIN COATED NECK LENGTH'S EVERY 1/4"

87

4 FLUTE

INTERNAL TOOL INC.


ORDER

EDP#

SERIES 92

HEAD

DIAMETER

1/8

3/16

1/4

5/16

3/8

1/2

5/8*

3/4*

NECK

DIAMETER

# OF

TEETH WIDTH

OF CUT

4

4

4

4

4

4

6

5

.050

.080

.125

.160

.250

.250

.250

.250

.020

.026

.032

.040

.050

.067

.070

.100

30° INC. DOUBLE ANGLE CUTTERS


15° ANGLEPER SIDE


92-0880

92-0885

92-0890

92-0895

92-0900

92-0905

92-0902

92-0904

92-0907

92-0910

92-0912

92-0920

92-0925

92-0930

.188

.375

.250

.750

.250

.750

.312

1.000

.312

1.000

.375

1.250

.250

.250

NECK

LENGTH

ITI CARBIDE

HEAD DIAMETER +.000 / -.005

NECK DIAMETER +.000 / -.010

FOR CUTTING CHAMFERS,SERRATIONS, ANGLES ETC.APPLICATION :

SHANK

DIA. ALTINCOATED EDP#

ORDER

EDP#

HEAD

DIAMETER

1/8

3/16

1/4

5/16

3/8

1/2

5/8*

3/4*

NECK

DIAMETER

# OF

TEETH WIDTH

OF CUT

4

4

4

4

4

4

5

5

.050

.080

.125

.160

.187

.250

.250

.250

.030

.044

.050

.062

.075

.100

.125

.150


92-1500

92-1505

92-1510

92-1515

92-1520

92-1525

92-1530

92-1535

92-1540

92-1545

92-1550

92-1555

92-1560

92-1565

.188

.375

.250

.750

.250

.750

.312

1.000

.312

1.000

.375

1.250

.250

.250

NECK

LENGTH

ALTINCOATED EDP#

ORDER

EDP#

1/8

3/16

1/4

5/16

3/8

1/2

5/8*

3/4*

NECK

DIAMETER

# OF

TEETH WIDTH

OF CUT

4

4

4

4

4

4

5

5

.062

.093

.125

.160

.188

.250

.250

.250

.062

.093

.125

.088

.109

.140

.144

.217


92-1180

92-1185

92-1190

92-1195

92-1200

92-1205

92-1207

92-1208

92-1210

92-1215

92-1220

92-1225

92-1230

92-1235

.188

.375

.250

.750

.250

.750

.312

1.000

.312

1.000

.375

1.250

.250

.250

NECK

LENGTH

ALTINCOATED EDP#

SHANK

DIAMETER

1/8

3/16

1/4

5/16

3/8

1/2

1/2

1/2

* CARBIDE HEAD WITH STEEL SHANK

92-0880-C

92-0885-C

92-0890-C

92-0895-C

92-0900-C

92-0905-C

92-0902-C

92-0904-C

92-0907-C

92-0910-C

92-0912-C

92-0920-C

92-0925-C

92-0930-C



92-1500-C

92-1505-C

92-1510-C

92-1515-C

92-1520-C

92-1525-C

92-1530-C

92-1535-C

92-1540-C

92-1545-C

92-1550-C

92-1555-C

92-1560-C

92-1565-C

92-1180-C

92-1185-C

92-1190-C

92-1195-C

92-1200-C

92-1205-C

92-1207-C

92-1208-C

92-1210-C

92-1215-C

92-1220-C

92-1225-C

92-1230-C

92-1235-C

SHANK

DIAMETER

1/8

3/16

1/4

5/16

3/8

1/2

1/2

1/2

SHANK

DIAMETER

1/8

3/16

1/4

5/16

3/8

1/2

1/2

1/2

OVERALL

LENGTH

2"

2-1/2"

2-1/2"

2-1/2"

2-1/2"

3"

3"

3"

OVERALL

LENGTH

2"

2-1/2"

2-1/2"

2-1/2"

2-1/2"

3"

3"

3"

OVERALL

LENGTH

2"

2-1/2"

2-1/2"

2-1/2"

2-1/2"

3"

3"

3"

SHANK

DIA.



22.5° ANGLEPER SIDE

45°INCLUDED ANGLE



SHANK

DIA.


30° ANGLEPER SIDE

60°INCLUDED ANGLE




30°INCLUDED ANGLE

HEAD

DIAMETER

88

made from

DO

UB

LE

A

NG

LE


CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


DOUBLE ANGLE CUTTERS



ORDER

EDP# HEAD

DIAMETER

NECK

DIAMETER

# OF

TEETH

WIDTH

OF CUT

2

4

4

4

4

4

4

6

4

6

6

88

88

.045

.062

.093

1/8

3/16

3/16

1/4

1/4

.300

.250

.280

.250

.280

.250

.490

.047

.062

.093

.120

.125

.185

.250

.125

.187

.312

.187

.250

.125

.250

.125

.250

90° INC. DOUBLE ANGLE CUTTERS NECK

LENGTH

SERIES 92

120° INC. DOUBLE ANGLE CUTTERS ITI CARBIDE

.125

.250

.188

.500

.250

.500

.750

1.000

.250

.500

.750

1.000

.500

.750

1.000

.312

.500

.750

1.000

.375

.625

.875

1.250

.250

.250

.500

.750

1.250

.250

.250

.250

.250

.250

.250

45° ANGLEPER SIDE








60° ANGLEPER SIDE

FOR CUTTING CHAMFERS,SERRATIONS, ANGLES ETC.

APPLICATION :


ALTINCOATED EDP#

3/32

1/8

3/16

1/4

5/16

3/8

1/2

1/2 *

5/8

5/8*

3/4 *

1" *

92-0955

92-0960

92-0965

92-0970

92-0975

92-0980

92-0985

92-0990

92-1000

92-1002

92-1005

92-1006

92-1007

92-1008

92-1009

92-1010

92-1011

92-1012

92-1015

92-1020

92-1022

92-1023

92-1025

92-1100

92-1105

92-1106

92-1107

92-1108

92-1110

92-1115

92-1117

92-1120

92-112592-1130

SHANK

DIAMETER

ORDER

EDP# HEAD &

SHANK DIA.

1/8

3/16

1/4

5/16

3/8

1/2

NECK

DIAMETER

# OF

TEETH WIDTH

OF CUT

4

4

4

4

4

4

.062

.094

.125

.150

.188

.250

.109

.163

.215

.281

.320

.430

92-1280

92-1285

92-1290

92-1295

92-1300

92-1302

92-1304

92-1306

92-1310

92-1315

92-1320

92-1325

.188

.500

.250

.750

.250

.750

.312

1.000

.312

1.000

.375

1.250

NECK

LENGTH

ALTINCOATED EDP#

1/8

1/8

3/16

1/4

5/16

3/8

1/2

1/2

5/8

1/2

1/2

1/2


1/4

92-0955-C

92-0960-C

92-0965-C

92-0970-C

92-0975-C

92-0980-C

92-0985-C

92-0990-C

92-1000-C

92-1002-C

92-1005-C

92-1006-C

92-1007-C

92-1008-C

92-1009-C

92-1010-C

92-1011-C

92-1012-C

92-1015-C

92-1020-C

92-1022-C

92-1023-C

92-1025-C

92-1100-C

92-1105-C

92-1106-C

92-1107-C

92-1108-C

92-1110-C

92-1115-C

92-1117-C

92-1120-C

92-1125-C92-1130-C

SHANK

DIAMETER

1/8

3/16

1/4

5/16

3/8

1/2

92-1280-C

92-1285-C

92-1290-C

92-1295-C

92-1300-C

92-1302-C

92-1304-C

92-1306-C

92-1310-C

92-1315-C

92-1320-C

92-1325-C

OVERALL

LENGTH

2"

2-1/2"

2-1/2"

2-1/2"

2-1/2"

3"

OVERALL

LENGTH

2"

2"

2-1/2"

2-1/2"

2-1/2"

2-1/2"

3"

3-1/8

3-1/2

3-1/8

3-1/8

3-1/8

90°INCLUDED ANGLE

120°INCLUDED ANGLE

SHANK

DIA.

SHANK

DIA.

89

made from

made from

DO

UB

LE

A

NG

LE

INTERNAL TOOL INC.


1/4" NECKLENGTH+.030 / -.000

ORDER

EDP#

SERIES 88

HEAD

DIAMETER

1/4"

NECK DIA.

# OF

TEETH

WIDTH

OF CUT

6

8

PITCH RANGE

THREAD MILLS

DEPTH OF CUT +.030 / -.000


HEAD DIA.+.000 / -.005

60°INCLUDE ANGLE

1

/2"

DIA

.E

XT

RA

LO

NG

2-3

/4"

SH

AN

K

MINI THREAD MILLS

HEAD DIA.+.015 / -.000


NECK DIA.+.000 / -.005

SHANK DIA.+.000 / -.0005

60°INCLUDED ANGLE

ORDER

EDP#

HEAD

DIAMETER

NECK

DIA.

# OF

TEETH

WIDTH

OF CUT DEPTH

OF CUT

SHANK

DIA.

88-0870

88-0880

88-0890

88-0900

88-0910

88-0915

88-1000

88-1005

88-1010

88-1015

88-1017

88-1020

88-1025

88-1027

88-1030

88-1035

88-1040

88-1045

88-1050

88-1055

88-1060

88-1065

88-1070

1/4

3/8

1/2

1/4

3/8

1/2

1/4

1/2

3/8

3/4

1"

3/8

3/4

1"

1/2

1"

1/2

3/4

1"

1-1/4

1"

1-1/4

1-1/2

1/8

1/8

1/8

1/8

1/8

1/8

3/16

3/16

3/16

3/16

3/16

1/4

1/4

1/4

5/16

5/16

3/8

3/8

3/8

3/8

1/2

1/2

1/2

.030

.035

.046

.055

.065

.078

.095

.100

.050

.060

.070

.090

.130

.180

.200

.300

3

3

3

3

3

3

3

3

3

3

3

4

4

4

4

4

6

6

6

6

5

5

5

.098

.125

.148

3/16

1/4

5/16

3/8

1/2

88-1100

88-1105

88-1110

88-1112

88-1115

88-1120

88-1125

88-1130

1/2

5/8

3/4

1"

ITI CARBIDE

THREAD MILLS

MILL EXTERNAL THREADS MILL INTERNAL THREADS

APPLICATION:1. THREAD MILLING ELIMINATES THE NEED FORSPECIAL TAPS. CUT ANY SIZE THREAD YOUWANT. UNDER SIZE, OVER SIZE, ANY PITCH,EVEN A TAPERED THREAD.

2. THREAD BLIND HOLES ALL THE WAY DOWNTO THE BOTTOM WITH MINIMUM LEAD.

TYPICAL TOOTH SHAPE

60°INCLUDED ANGLE

THREAD MILLS HAVE A SMALL FLAT ONTHE TIP. SIZE DEPENDS ON PITCH. IF YOUR APPLICATION DOSEN'TREQUIRE A FLAT, TRY OUR DOUBLEANGLE CUTTERS ON PAGE 88.

SMALL FLAT


SOLID CARBIDE

SERIES 88

ITI CARBIDE


QUICK SELECTOR FOR

STANDARD I.D.THREADS

INCH METRIC TOOL TO USE

5-40

5-44

6-32

6-40

8-32

8-36

10-32

10-24

12-24

12-28

1/4-20

1/4-28

1/4-18

5/16-18

5/16-24

3/8-16

3/8-24

7/16-14

7/16-20

1/2-13

1/2-20

9/16-12

9/16-18

5/8-11

5/8-18

3/4-10

3/4-16

M3.0 X .5

M3.5 X .6

88-087088-088088-0890

88-090088-091088-0915

88-100088-1005

88-1010

88-102088-102588-1027

88-103088-103588-104088-104588-105088-1055

88-106088-106588-1070

.062

.062

.094

.135

.094

.156

.156

.250

16 - 3216 - 3211 - 288 - 2811 - 247 - 247 - 204 - 18

PITCH

RANGE

32-64

30-56

24-56

18-56

16-48

14-40

12-32

11-32

ALTINCOATED EDP#

88-0870-C

88-0880-C

88-0890-C

88-0900-C

88-0910-C

88-0915-C

88-1000-C

88-1005-C

88-1010-C

88-1015-C

88-1017-C

88-1020-C

88-1025-C

88-1027-C

88-1030-C

88-1035-C

88-1040-C

88-1045-C

88-1050-C

88-1055-C

88-1060-C

88-1065-C

88-1070-C

88-1100-C

88-1105-C

88-1110-C

88-1112-C

88-1115-C

88-1120-C

88-1125-C

88-1130-C

ALTINCOATED EDP#

M4.0 X .7

M4.5 X .75

M5.0 X .8

M6.0X 1.0

M7.0 X 1.0

M8.0 X 1.5

M8.0X1.0

M8.0X1.25

M10.0X1.0

M10.0 X 1.25

M16X2.0

M16X5.0

M12.0X 1.25

M12.0 X 1.75

M14.0 X 1.5

M14.0X 2.0

made from

made from

90

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


DEDE

SERIES 89

SIZECUTTING

DIAMETER

THREAD MILLS ALTIN COATED

ITI CARBIDE

MULTIPLE THREAD INTERNAL / EXTERNAL

ALTINCOATED EDP#

.115

.115

.115

.120

.120

.180

.180

.240

.240

.290

.290

.340

.340

.350

.350

.370

.370

.470

.470

.495

.495

.620

.620

.620

.620

THREAD

LENGTH

OVERALL

LENGTH

NUMBER

OF FLUTES

SHANK

SIZE

6-328-328-36

10-2410-321/4-201/4-285/16-185/16-243/8-163/8-247/16-147/16-201/2-131/2-209/16-129/16-185/8-115/8-183/4-103/4-167/8-9

7/8-141"-81"-12

SERIES 35

STUB ACME THREAD MILLS

ITI CARBIDE ACME THREAD INTERNAL / EXTERNAL

.218

.250

.250

.312

.312

.500

.500

.625

.625

.750

.750

.875

.875

.875

.875

.875

.8751.2501.2501.2501.2501.2501.2501.3751.375

2"2"2"2"2"

2-1/2"2-1/2"2-1/2"2-1/2"

3"3"3"3"

3-1/2"3-1/2"3-1/2"3-1/2"3-1/2"3-1/2"3-1/2"3-1/2"3-1/2"3-1/2"

4"4"

3333333334444444455555555

1/81/81/8

3/163/163/163/161/41/4

5/165/163/83/83/83/81/21/21/21/21/21/25/85/83/43/4

89-120089-120589-121089-121589-122089-122589-123089-123589-124089-124589-125089-125589-126089-126589-127089-127589-128089-128589-129089-129589-130089-130589-131089-131589-1320


MILL INTERNAL OR EXTERNAL THREADS IN ONE PASS

THREAD

LENGTH

CUTTING

DIAMETER

OVERALL

LENGTH

SHANK

SIZE

ACME THREAD MILLS

made from

made from

SHANK DIAMETER

CUT DIA.

REACH

OVERALL LENGTH

THREAD

SIZE

CUT

DIA.

ALTINCOATED EDP#

OVERALL

LENGTH

# OF

TEETH

SHANK

DIA.

.170

.220

.270

.370

.500

.580

.800

1.120

2-1/2

2-1/2

2-1/2

2-1/2

3"

3-1/8"

3-1/8"

3-1/8"

3

3

4

4

4

4

6

8

REACH

1/4

1/4

5/16

3/8

1/2

1/2

1/2 *

1/2*

EDP#

35-1000

35-1005

35-1010

35-1015

35-1020

35-1025

35-1030

35-1035

.375

.500

.750

.750

1.00

1.00

2.00

2.00

1/4-16

5/16-14

3/8-12

1/2-10

5/8-8

3/4-6

7/8-6

1"-5

1-1/8-5

1-1/4-5

1-3/8-4

1-1/2-4

1-3/4-4

TIP

WIDTH

.024

.028

.033

.037

.048

.065

.079

.100

* CARBIDE HEAD ON HARDENED STEEL SHANK

TIP WIDTH

35-1000-C

35-1005-C

35-1010-C

35-1015-C

35-1020-C

35-1025-C

35-1030-C

35-1035-C

THREAD

SIZE

CUT

DIA.

ALTINCOATED EDP#

OVERALL

LENGTH

# OF

TEETH

SHANK

SIZE

.170

.220

.270

.370

.500

.580

.800

1.120

2-1/2

2-1/2

2-1/2

2-1/2

3"

3-1/8"

3-1/8"

3-1/8"

3

3

4

4

4

6

6

8

REACH

1/4

1/4

5/16

3/8

1/2

1/2

1/2 *

1/2*

EDP#

35-2000

35-2005

35-2010

35-2015

35-2020

35-2025

35-2030

35-2035

.375

.500

.750

.750

1.00

1.00

2.00

2.00

1/4-16

5/16-14

3/8-12

1/2-10

5/8-8

3/4-6

7/8-6

1"-5

1-1/8-5

1-1/4-5

1-3/8-4

1-1/2-4

1-3/4-4

TIP

WIDTH

.021

.024

.028

.032

.041

.057

.069

.088

35-2000-C

35-2005-C

35-2010-C

35-2015-C

35-2020-C

35-2025-C

35-2030-C

35-2035-C

91

29° INCLUDED ANGLE

INTERNAL TOOL INC.


SERIES 93

CUTTING

DIAMETER

CARBIDE REAMERS ITI CARBIDE

STRAIGHT FLUTE RIGHT HAND CUT

OVERALL

LENGTH NUMBER

OF FLUTES

SHANK

SIZE

.0620

.0625

.0630

.0635

.0930

.0935

.0938

.0940

.0945

.1090

.1094

.1100

.1240

.1245

.1250

.1255

.1700

.1719

.1725

.1860

.1865

.1870

.1875

.1880

.1885

.2025

.2031

.2035

.2330

.2340

.2344

.2350

.2470

.2475

.2480

.2485

.2490

.2495

.2500

.2505

.2510

.2515

.2520

.2650

.2656

.2660

.2800

.2812

.2820

.2960

.2965

.2969

.2975

93-0620

93-0625

93-0630

93-0635

93-0930

93-0935

93-0938

93-0940

93-0945

93-1090

93-1094

93-1100

93-1240

93-1245

93-1250

93-1255

93-1700

93-1719

93-1725

93-1860

93-1865

93-1870

93-1875

93-1880

93-1885

93-2025

93-2031

93-2035

93-2330

93-2340

93-2344

93-2350

93-2470

93-2475

93-2480

93-2485

93-2490

93-2495

93-2500

93-2505

93-2510

93-2515

93-2520

93-2650

93-2656

93-2660

93-2800

93-2812

93-2820

93-2960

93-2965

93-2969

93-2975

FLUTE

LENGTH

1-1/2"

1-1/2"

1-1/2"

1-1/2"

2"

2"

2"

2"

2"

2-1/4"

2-1/4"

2-1/4"

2-1/4"

2-1/4"

2-1/4"

2-1/4"

2-3/4"

2-3/4"

2-3/4"

2-3/4"

2-3/4"

2-3/4"

2-3/4"

2-3/4"

2-3/4"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3-1/4"

3-1/4"

3-1/4"

3-1/4"

3-1/4"

3-1/4"

3-1/4"

3-1/4"

3-1/4"

3-1/4"

.3115

.3120

.3125

.3130

.3135

.3275

.3281

.3285

.3430

.3435

.3438

.3445

.3590

.3594

.3600

.3730

.3735

.3740

.3745

.3750

.3755

.3760

.3900

.3906

.3910

.4060

.4062

.4070

.4210

.4219

.4225

.4365

.4370

.4375

.4380

.4525

.4531

.4540

.4680

.4688

.4695

.4840

.4844

.4850

.4980

.4985

.4990

.4995

.5000

.5005

.5010

CUTTING

DIAMETER

1-1/8"

1-1/8"

1-1/8"

1-1/8"

1-1/8"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-3/8"

1-3/8"

1-3/8"

1-3/8"

1-3/8"

1-3/8"

1-3/8"

1-3/8"

1-3/8"

1-3/8"

1-3/8"

1-3/8"

1-3/8"

1-1/2"

1-1/2"

1-1/2"

1-1/2"

1-1/2"

1-1/2"

1-1/2"

1-1/2"

1-1/2"

1-1/2"

OVERALL

LENGTH NUMBER

OF FLUTES

SHANK

SIZE

93-3115

93-3120

93-3125

93-3130

93-3135

93-3275

93-3281

93-3285

93-3430

93-3435

93-3438

93-3445

93-3590

93-3594

93-3600

93-3730

93-3735

93-3740

93-3745

93-3750

93-3755

93-3760

93-3900

93-3906

93-3910

93-4060

93-4062

93-4070

93-4210

93-4219

93-4225

93-4365

93-4370

93-4375

93-4380

93-4525

93-4531

93-4540

93-4680

93-4688

93-4695

93-4840

93-4844

93-4850

93-4980

93-4985

93-4990

93-4995

93-5000

93-5005

93-5010

FLUTE

LENGTH

3-1/4"

3-1/4"

3-1/4"

3-1/4"

3-1/4"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

ORDER

EDP #

ORDER

EDP #

.0620

.0625

.0630

.0635

.0930

.0935

.0938

.0940

.0945

.1090

.1094

.1100

.1240

.1245

.1250

.1255

.1700

.1719

.1725

.1860

.1865

.1870

.1875

.1880

.1885

.2025

.2031

.2035

.2330

.2340

.2344

.2350

.2470

.2475

.2480

.2485

.2490

.2495

.2500

.2505

.2510

.2515

.2520

.2650

.2656

.2660

.2800

.2812

.2820

.2960

.2965

.2969

.2975

.3115

.3120

.3125

.3130

.3135

.3275

.3281

.3285

.3430

.3435

.3438

.3445

.3590

.3594

.3600

.3730

.3735

.3740

.3745

.3750

.3755

.3760

.3900

.3906

.3910

.4060

.4062

.4070

.4210

.4219

.4225

.4365

.4370

.4375

.4380

.4525

.4531

.4540

.4680

.4688

.4695

.4840

.4844

.4850

.4980

.4985

.4990

.4995

.5000

.5005

.5010

INTERNAL TOOL THE LEADER IN INNOVATION

made from

92

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


FLAT BOTTOM CENTER CUTTING15° RIGHT HAND HELIX, RIGHT HAND CUTDIAMETER TOLERANCE +.000 / -.001

APPLICATION :1. SPOTTING ON IRREGULAR OR ROUND SURFACES2. COUNTER BORING3. FLAT BOTTOM REAMING4. STRAIGHTENING MISALIGNED OR OUT OF ROUND HOLES

3/321/89/645/3211/643/1613/647/3215/641/417/649/3219/645/1621/6411/3223/643/825/6413/3227/647/1629/6415/3231/641/233/6417/3235/649/1637/6419/3239/645/841/6421/3243/6411/1645/6423/3247/643/4

85-094185-125185-140185-156185-171185-187185-203185-219185-234185-250185-265185-281185-297185-312185-328185-343185-359185-375185-390185-406185-421185-437185-453185-469185-484185-500185-515185-531185-547185-562185-578185-594185-609185-625185-641185-656185-672185-687185-703185-719185-734185-7501

3/83/81/21/21/21/25/85/85/85/811/1611/1611/1611/163/43/43/43/47/87/87/87/81”1”1”1”1-1/81-1/81-1/81-1/81-3/161-3/161-3/161-3/161-1/41-1/41-1/41-1/41-1/21-1/21-1/21-1/2

2”2”2-1/22-1/22-1/22-1/22-1/22-1/22-1/22-1/22-1/22-1/22-1/22-1/22-1/22-1/22-1/22-1/23”3”3”3”3”3”3”3”3”3”3”3”3-1/23-1/23-1/23-1/24”4”4”4”4”4”4”

4”

1/81/83/163/163/163/161/41/41/41/45/165/165/165/163/83/83/83/87/167/167/167/161/21/21/21/29/169/169/169/165/85/85/85/83/43/43/43/43/43/43/43/4

SHANKDIAMETER

LENGTH OF FLUTE

OVERALL LENGTH

EDPNUMBER

FLAT BOTTOM ANDCENTER CUTTING.CIRCLE GROUND ONOUTSIDE DIAMETER.WILL NOT CUT SIDEWAYS.


.094

.125

.140

.156

.171

.187

.203

.219

.234

.250

.265

.281

.297

.312

.328

.343

.359

.375

.390

.406

.421

.437

.453

.469

.484

.500

.515

.531

.547

.562

.578

.594

.609

.625

.641

.656

.672

.687

.703

.719

.734

.750

DIAMETER +.000 / -.001

SERIES 85

N/C COUNTERBORES

THESE COUNTERBORES AREDESIGNED FOR USE ON A CNCTHEY DONT HAVE A PILOTOR A PILOT HOLE.

ITI CARBIDE

OVERALL LENGTH

LENGTH OF FLUTE

SHANK DIAMETER

DIAMETER +.000/-.001

FLAT BOTTOMCENTER CUTTING

N/C COUNTERBORES


made from

93

INTERNAL TOOL INC.


SOLID CARBIDE SLITTING SAWS ITI CARBIDE

ORDER

EDP# DIAMETER

3/4" WITH

1/4"

HOLE

# OF

TEETH

WIDTH

OF CUT

10

10

10

10

10

10

.0312

.0625

.0938

.1250

.1875

.2500

95-2000

95-2010

95-2020

95-2030

95-2040

95-2050

95-2060

95-2070

95-2080

95-2090

95-2100

95-2110

95-2120

95-2130

95-2140

95-2150

95-2160

95-2170

95-2180

95-2190

95-2200

95-2210

95-2220

95-2230

95-2240

95-2250

95-2260

95-2270

95-2280

95-2290

95-2300

95-2310

95-2320

95-2330

95-2340

95-2350

95-2360

95-2370

95-2380

95-2390

95-2400

95-2410

95-2420

95-2430

95-2440

95-2450

95-2460

95-2470

# OF

TEETH

20

20

20

20

20

20

ORDER

EDP#

1" WITH

3/8"

HOLE

.0312

.0625

.0938

.1250

.1875

.2500

12

12

12

12

12

12

24

24

24

24

24

24

1-1/4 WITH

1/2"

HOLE

.0312

.0625

.0938

.1250

.1875

.2500

16

16

16

16

16

16

36

36

36

36

36

36

1-1/2 WITH

1/2"

HOLE

16

16

16

16

16

16

36

36

36

36

36

36

.0312

.0625

.0938

.1250

.1875

.2500

.0312

.0625

.0938

.1250

.1875

.2500

.0312

.0625

.0938

.1250

.1875

.2500

.0312

.0625

.0938

.1250

.1875

.2500

1-3/4 WITH

1/2"

HOLE

2" WITH

1/2"

HOLE

.0312

.0625

.0938

.1250

.1875

.2500

2-1/4 WITH

5/8"

HOLE

ORDER

EDP# DIAMETER # OF

TEETH

WIDTH

OF CUT

28

28

28

28

28

28

.0312

.0625

.0938

.1250

.1875

.2500

95-2480

95-2490

95-2500

95-2510

95-2520

95-2530

95-2540

95-2550

95-2560

95-2570

95-2580

95-2590

95-2600

95-2610

95-2620

95-2630

95-2640

95-2650

# OF

TEETH

56

56

56

56

56

56

ORDER

EDP#

.0312

.0625

.0938

.1250

.1875

.2500

30

30

30

30

30

30

60

60

60

60

60

60.0312

.0625

.0938

.1250

.1875

.2500

2-3/4 WITH

1"

HOLE

3" WITH

1"

HOLE

4" WITH

1"

HOLE

30

30

30

30

30

30

60

60

60

60

60

60

SERIES 95

2-1/2 WITH

1"

HOLE

HOLE

SIZE

CUTTER

DIAMETER

WIDTH

OF

CUT

SPECIALS, CORNER RADIUS, ETC, ARE AVAILABLE ON REQUEST.

95-7000

95-7010

95-7020

95-7030

95-7040

95-7050

95-7060

95-7070

95-7080

95-7090

95-7100

95-7110

95-7120

95-7130

95-7140

95-7150

95-7160

95-7170

95-7180

95-7190

95-7200

95-7210

95-7220

95-7230

95-7240

95-7250

95-7260

95-7270

95-7280

95-7290

95-7300

95-7310

95-7320

95-7330

95-7340

95-7350

95-7360

95-7370

95-7380

95-7390

95-7400

95-7410

95-7420

95-7430

95-7440

95-7450

95-7460

95-7470

24

24

24

24

24

24

36

36

36

36

36

36

48

48

48

48

48

48

24

24

24

24

24

24

28

28

28

28

28

28

56

56

56

56

56

56

28

28

28

28

28

28

56

56

56

56

56

56

95-7480

95-7490

95-7500

95-7510

95-7520

95-7530

95-7540

95-7550

95-7560

95-7570

95-7580

95-7590

95-7600

95-7610

95-7620

95-7630

95-7640

95-7650

94 ITI CARBIDE: FOR EXTRA LONG TOOL LIFE

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


SERIES 95

2" WITH 1/2" HOLE

ORDER

EDP# DIAMETER # OF

TEETH

WIDTH

OF CUT

12

12

12

12

12

.0312

.0625

.0938

.1250

.1875

87-2000

87-2010

87-2020

87-2030

87-2040

.0312

.0625

.0938

.1250

.1875

16

16

16

16

16

87-2050

87-2060

87-2070

87-2080

87-2090

.0312

.0625

.0938

.1250

.1875

87-2100

87-2110

87-2120

87-2130

87-2140

30

30

30

30

30

.0312

.0625

.0938

.1250

.1875

1-1/2 WITH

1/2"

HOLE

2" WITH

1/2"

HOLE

3" WITH

1"

HOLE

4" WITH

1"

HOLE

24

24

24

24

24

ORDER

EDP# DIAMETER

# OF

TEETH WIDTH

OF CUT

10

10

10

.1250

.1875

.2500

95-1000

95-1010

95-1020

18

18

18

95-1060

95-1070

95-1080

FULL RADIUS SOLID CARBIDE SLITTING SAWS

60° included DOUBLE ANGLE SOLID CARBIDE SLITTING SAWS

SAW ARBORS

SERIES 87

SERIES 95

90° included DOUBLE ANGLE SOLID CARBIDE SLITTING SAWS

87-2150

87-2160

87-2170

87-2180

87-2190

.1250

.1875

.2500

.1250

.1875

.2500

3" WITH 1" HOLE

4" WITH 1" HOLE

95-1030

95-1040

95-1050

14

14

14

2" WITH 1/2" HOLE

ORDER

EDP# DIAMETER # OF

TEETH WIDTH

OF CUT

10

10

10

.1250

.1875

.2500

95-1100

95-1110

95-1120

18

18

18

95-1160

95-1170

95-1180

.1250

.1875

.2500

.1250

.1875

.2500

3" WITH 1" HOLE

4" WITH 1" HOLE

95-1130

95-1140

95-1150

14

14

14

60°included 90°included

SERIES 97

1/4"

ORDER

EDP#

SAW'S

HOLE SIZE SHANK

DIAMETER

97-1060

97-1070

97-1080

97-1090

97-2000

3/8"

5/8"

1/2"

1"

1/2"

1/2"

1/2"

3/4"

3/4"

SHANK

LENGTH

CAP

THICKNESS

MAJOR

DIAMETER

BODY

LENGTH

.080

.080

.090

.120

.160

.500

.620

.750

1.00

1.500

1.000

1.180

1.370

1.500

1.750

1.700

1.700

1.700

2.030

2.030

HOLE

SIZE

CUTTER

DIAMETER

WIDTH

OF

CUT

THE RADIUS IS HALF

OF THE WIDTH

CUTTER

DIAMETER

WIDTH

OF

CUT

CUTTER

DIAMETER

WIDTH

OF

CUT

SAW'S

HOLE SIZE

SHANK

DIAMETER

SHANK

LENGTH

BODY

LENGTH

MAJOR

DIAMETER

CAP

THICKNESS

95INTERNAL TOOL THE LEADER IN INNOVATION

INTERNAL TOOL INC.


SPEEDS AND FEEDS FOR CARBIDE ENDMILLS

ALUMINUM / ALUMINUM ALLOYS

BRASS / SOFT BRONZE

BRONZE / HIGH TENSILE

COPPER / COPPER ALLOYS

IRON-CAST (SOFT)

IRON-CAST (HARD)

IRON-DUCTILE

IRON MALLEABLE

MAGNESIUM / MAGNESIUM ALLOYS

MOLYBDENUM

MONEL / HIGH NICKEL STEEL

NICKEL BASE HI-TEMP ALLOYS

PLASTICS

PLASTICS-GLASS FILLED

REFRACTORY ALLOYS

STEEL-LOW CARBON

STEEL-MEDIUM CARBON

STEEL-UP TO Rc35

STEEL-Rc35 - Rc50

STEEL-Rc50 - Rc60

STEEL-MOLD

STEEL-TOOL

STAINLESS STEEL-SOFT

STAINLESS STEEL-HARD

TITANIUM-SOFT

TITANIUM-HARD

SPEEDSURFACE FEET

PER MINUTE

ENDMILL DIAMETER FEED PER TOOTH (INCHES)

MATERIAL UP TO 1/4" UP TO 1/2" UP TO 1"

600-1300

400-700

250-400

350-900

200-500

100-450

80-400

250-600

800-1400

800-1100

150-300

20-130

600-1200

300-800

80-400

250-550

100-250

150-250

80-150

25-120

200-350

100-300

250-400

50-250

120-350

30-150

.0002 - .002

.0005 - .002

.001 - .002

.0005 - .002

.0005 - .002

.0003 - .001

.0002 - .001

.001 - .002

.0005 - .002

.001 - .002

.0002 - .001

.0003 - .0008

.0006 - .003

.0006 - .003

.0002 - .001

.0002 - .001

.0004 - .0015

.0005 - .001

.0003 - .0007

.0002 - .0005

.0002 - .001

.0002 - .001

.0002 - .001

.0002 - .001

.0002 - .001

.0002 - .0005

.002 - .004

.002 - .003

.002 - .003

0.002

.002 - .003

.0008 - .002

.001 - .002

.001 - .003

.002 - .004

.002 - .004

.001 - .002

.0008 - .001

.003 - .006

.003 - .004

0.001

.001 - .003

.0015 - .002

.001 - .002

.0007 - .001

.0005 - .001

.001 - .002

.001 - .002

.001 - .002

.001 - .002

.001 - .002

.0005 - .001

.004 - .008

.003 - .005

.004 - .006

.002 - .006

.003 - .006

.003 - .005

.002 - .006

.003 - .008

.004 - .010

.004 - .008

.002 - .004

.001 - .002

.006 - .015

.004 - .012

.001 - .002

.003 - .007

.002 - .005

.002 - .003

.002 - .003

.001 - .003

.002 - .006

.002 - .006

.002 - .006

.001 - .005

.002 - .006

.001 - .004

PLUNGE OPERATIONS: REDUCE FEED PER TOOTH 50-65%SLOTTING APPLICATIONS: SURFACE SPEEDS (SFM) SHOULD BE REDUCED APPROXIMATELY 20% OF THE LOWEST VALUELIGHT RADIAL: DEPTHS OF CUT, THE HIGHER OF THE RECOMMENDED SURFACE SPEEDS (SFM) SHOULD BE USEDGREATER RADIAL: DEPTHS OF CUT (MORE THAN .5 X DIAMETER) THE LOWER RANGE OF SURFACE SPEEDS (SFM) SHOULD BE USEDAXIAL DEPTH OF CUT: RECOMMENDATIONS ARE NOT TO EXCEED 1-1/2 TIMES THE DIAMETER. IF THIS CONDITION EXISTS,

CONVENTIAL MILLING SHOULD BE USED AND FEED PER TOOTH SHOULD BE REDUCED BY 50%

PLEASE NOTE: THE ABOVE RECOMMENDATIONS SHOULD BE CONSIDERED ONLY AS A STARTING POINT;"FINE TUNING" MAY BE REQUIRED IN ORDER TO MAXIMIZE PERFORMANCE

96

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


SPEEDS AND FEEDS

SPEEDS AND FEEDS FOR BORING TOOLS

MATERIAL

PLASTIC

MAGNESIUMALUMINUM

COPPER

BRASS

BRONZE

CAST IRON

STEEL

TITANIUM

STAINLESS

NICKEL

MONEL

INCONEL

WASPALOY

HASTELLOY

TYPE

TEFLONNYLONPHENOLICGLASS FILLEDAZ,AM,EZ,ZE,HK2021 THRU 6061

101-707834-978

GRAYDUCTILEMALLEABLE

1005-10291030-10551060-109510L45-10L5012L13-12L1541L30-41L504140-41504140 (35 HRC)8617-8622M1-M6H10-H19D2-D7A2-A9, 01-07W1, W2M-50, 52100TI-9AI-6V201-385405-44615-5PH,16-6PH,14-4PH

NICKEL 200-230

SPEEDSURFACE FEET

PER MINUTE

INSERT BARSSERIES 16THRU 18

PAGE 45 THRU 48

DEPTH OF CUT

FEEDINCHES PER

REVOLUTION

SOLID CARBIDE BARS OUR SERIES 10

PAGE 2

TIN COATED SOLID CARBIDE BARS

OUR SERIES 11 PAGE 3

500-600700-800700-800700-800750-1500700-1400

600-800600-800

350-400

300-400

250-350250-350250-350

100-300100-300150-400300-500300-500200-400150-40090-125100-300150-250150-250150-250150-250150-250300-40090-250100-250100-250300-400

100-250

80-120

80-120

80-120

80-120

.003 - .006

.001 - .003

.001 - .003

.001 - .003

.005 - .012

.005 - .012

.003 - .005

.003 - .005

.001 - .003

.001 - .002

.004 - .010

.004 - .010

.004 - .010

.003 - .007

.003 -.007

.003 - .005

.004 - .006

.003 - .005

.003 - .005

.003 - .005

.001 - .004

.002 - .004

.003 - .008

.003 - .007

.004 - .010

.003 - .008

.003 - .008

.004 - .010

.001 - .003

.001 - .004

.001 - .004

.002 - .004

.002 - .005

.001 - .003

.001 - .003

.001 - .003

.001 - .003

.007

.007

.007

.005

.008

.008

.008

.008

.006

.006

.007

.007

.007

.007

.007

.007

.007

.007

.007

.007

.004

.007

.006

.006

.006

.006

.006

.007

.005

.005

.005

.005

.004

.004

.004

.004

.004

.012

.012

.012

.012

.012

.014

.014

.014

.011

.011

.007

.007

.007

.014

.014

.014

.014

.014

.014

.014

.007

.006

.005

.005

.005

.005

.006

.006

.008

.008

.008

.008

.007

.007

.007

.007

.007

.016

.016

.016

.016

.016

.018

.016

.016

.012

.012

.009

.009

.009

.016

.016

.016

.016

.016

.016

.016

.008

.007

.006

.006

.006

.006

.007

.007

.011

.012

.012

.012

.009

.009

.009

.009

.009

NOTE : ALL SPEEDS AND FEEDS LISTED HERE ARE PROVIDED FOR REFERENCE ONLY.

RPM=SFM X 12( ¶ ) X DIAMETER 97

INTERNAL TOOL INC.


SPEEDS AND FEEDS

SPEEDS AND FEEDS FOR GROOVING TOOLS

MATERIAL

PLASTIC

MAGNESIUMALUMINUM

COPPER

BRASS

BRONZE

CAST IRON

STEEL

TITANIUM

STAINLESS

NICKEL

MONEL

INCONEL

WASPALOY

HASTELLOY

TYPE


101-707834-978


1005-10291030-10551060-109510L45-10L5012L13-12L1541L30-41L504140-41504140 (35 HRc)8617-8622M1-M6H10-H19D2-D7A2-A9, 01-07W1, W2M-50, 52100TI-9AI-6V201-385405-44615-5PH,16-6PH,14-4PH

NICKEL 200-230

SPEEDSURFACE FEET

PER MINUTE

FEED

SOLID CARBIDE OUR SERIES 20

PAGE 10

TIN COATED SOLID CARBIDE OUR SERIES 22

PAGE 11

350-400350-600500-600250-300850-1000900-1000

150-170500-600

200-250

200-250

120-35070-35075-550

250-450110-37090-250130-450550-60065-35065-400190-200100-400150-20065-250150-200150-250150-25060-30090-100200-280250-300100-200

200-250

100-150

40-50

70-100

70-90

.003 - .006

.001 - .003

.001 - .003

.001 - .003

.005 - .012

.005 - .012

.003 - .005

.003 - .005

.001 - .003

.001 - .002

.004 - .010

.004 - .010

.004 - .010

.003 - .007

.003 -.007

.003 - .005

.004 - .006

.003 - .005

.003 - .005

.003 - .005

.001 - .004

.002 - .004

.003 - .008

.003 - .007

.004 - .010

.003 - .008

.003 - .008

.004 - .010

.001 - .003

.001 - .004

.001 - .004

.002 - .004

.002 - .005

.001 - .003

.001 - .003

.001 - .003

.001 - .003

.007

.007

.007

.005

.008

.008

.008

.008

.006

.006

.007

.007

.007

.007

.007

.007

.007

.007

.007

.007

.004

.007

.006

.006

.006

.006

.006

.007

.005

.005

.005

.005

.004

.004

.004

.004

.004

.012

.012

.012

.012

.012

.014

.014

.014

.011

.011

.007

.007

.007

.014

.014

.014

.014

.014

.014

.014

.007

.006

.005

.005

.005

.005

.006

.006

.008

.008

.008

.008

.007

.007

.007

.007

.007

Inches perrevolution

CARBIDE INSERT OUR SERIES 26

PAGE 53

FEEDInches perrevolution


FEED


RPM=SFM X 12( ¶ ) X DIAMETER98

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


SPEEDS AND FEEDS

SPEEDS AND FEEDS FOR KEY CUTTERS

MATERIAL

PLASTIC

MAGNESIUMALUMINUM

COPPER

BRASS

BRONZE

CAST IRON

STEEL

TITANIUM

STAINLESS

NICKEL

MONEL

INCONEL

WASPALOY

HASTELLOY

TYPE


101-707834-978



NICKEL 200-230

SPEEDSURFACE FEET

PER MINUTE

200200180150300300

100200

250

230

180140100

1801801701651601501401301201101009080706090100110120

80

80

80

80

80


FORMULA FOR COMPUTING TABLE SPEED IS.

.001 X NUMBER OF TEETH IN CUTTER X RPM

EXAMPLE CUTTING ALUMINUM WITH A 3/4" KEY CUTTER .001 X 10 X 1600 = 16

MU

LTIP

LIE

R

NU

MB

ER

OF

T

EE

TH R

PM

FORMULA FOR COMPUTING SPINDLE SPEED IS.

SURFACE FEET PER MINUTE FACTOR X 4 = ___

____ DIVIDED BY DIAMETER OF CUTTER =____RPM

EXAMPLE CUTTING ALUMINUM WITH A 3/4" KEY CUTTER 300 X 4 = 1200 divided by .750 = 1600 RPM

surf

ace

feet

cutte

r di

amet

er

MU

LTIP

LIE

R

INC

HE

S P

ER

MIN

UT

E

?

?

99

INTERNAL TOOL INC.


SPEEDS AND FEEDS

SPEEDS AND FEEDS FOR GROOVING TOOLS

MATERIAL

PLASTIC

MAGNESIUMALUMINUM

COPPER

BRASS

BRONZE

CAST IRON

STEEL

TITANIUM

STAINLESS

NICKEL

MONEL

INCONEL

WASPALOY

HASTELLOY

TYPE


101-707834-978



NICKEL 200-230

SPEEDSURFACE FEET

PER MINUTE

FEED

SOLID CARBIDE OUR SERIES 20

PAGE 10

TIN COATED SOLID CARBIDE OUR SERIES 22

PAGE 11

350-400350-600500-600250-300850-1000900-1000

150-170500-600

200-250

200-250

120-35070-35075-550

250-450110-37090-250130-450550-60065-35065-400190-200100-400150-20065-250150-200150-250150-25060-30090-100200-280250-300100-200

200-250

100-150

40-50

70-100

70-90

.003 - .006

.001 - .003

.001 - .003

.001 - .003

.005 - .012

.005 - .012

.003 - .005

.003 - .005

.001 - .003

.001 - .002

.004 - .010

.004 - .010

.004 - .010

.003 - .007

.003 -.007

.003 - .005

.004 - .006

.003 - .005

.003 - .005

.003 - .005

.001 - .004

.002 - .004

.003 - .008

.003 - .007

.004 - .010

.003 - .008

.003 - .008

.004 - .010

.001 - .003

.001 - .004

.001 - .004

.002 - .004

.002 - .005

.001 - .003

.001 - .003

.001 - .003

.001 - .003

.007

.007

.007

.005

.008

.008

.008

.008

.006

.006

.007

.007

.007

.007

.007

.007

.007

.007

.007

.007

.004

.007

.006

.006

.006

.006

.006

.007

.005

.005

.005

.005

.004

.004

.004

.004

.004

.012

.012

.012

.012

.012

.014

.014

.014

.011

.011

.007

.007

.007

.014

.014

.014

.014

.014

.014

.014

.007

.006

.005

.005

.005

.005

.006

.006

.008

.008

.008

.008

.007

.007

.007

.007

.007


CARBIDE INSERT OUR SERIES 26

PAGE 53

FEEDInches perrevolution


FEED


RPM=SFM X 12( ¶ ) X DIAMETER98

CA

TA

LO

G T

WE

NT

Y T

WE

LV

E

INTERNAL TOOL INC.


SPEEDS AND FEEDS

SPEEDS AND FEEDS FOR KEY CUTTERS

MATERIAL

PLASTIC

MAGNESIUMALUMINUM

COPPER

BRASS

BRONZE

CAST IRON

STEEL

TITANIUM

STAINLESS

NICKEL

MONEL

INCONEL

WASPALOY

HASTELLOY

TYPE


101-707834-978



NICKEL 200-230

SPEEDSURFACE FEET

PER MINUTE

200200180150300300

100200

250

230

180140100

1801801701651601501401301201101009080706090100110120

80

80

80

80

80


FORMULA FOR COMPUTING TABLE SPEED IS.

.001 X NUMBER OF TEETH IN CUTTER X RPM

EXAMPLE CUTTING ALUMINUM WITH A 3/4" KEY CUTTER .001 X 10 X 1600 = 16

MU

LTIP

LIE

R

NU

MB

ER

OF

T

EE

TH R

PM

FORMULA FOR COMPUTING SPINDLE SPEED IS.

SURFACE FEET PER MINUTE FACTOR X 4 = ___

____ DIVIDED BY DIAMETER OF CUTTER =____RPM

EXAMPLE CUTTING ALUMINUM WITH A 3/4" KEY CUTTER 300 X 4 = 1200 divided by .750 = 1600 RPM

surf

ace

feet

cutte

r di

amet

er

MU

LTIP

LIE

R

INC

HE

S P

ER

MIN

UT

E

?

?

99

INTERNAL TOOL INC.


Any technical assistance or application suggestions made by Internal Tool, Inc. personnel areonly to assist the customer and in all cases use of such information is soley the customer'sresponsibility.

Technical Assistance

CALL FACTORY DIRECT ATPHONE 909-392-4800FAX 909-392-2627EMAIL [email protected] Tool Inc. 1338 Palomares Ave. LaVerne CA. 91750

Shipping TermsAll shipments are FOB Internal Tool, Inc. La Verne CA. unless otherwise specified. Normallyterms of payment on open accounts are 1% 10 NET 30 days from the date of invoice.

Net accounts are considered past due at 30 days from the date of invoice. Past due acccountsare subject to shipment and production hold at the discretion of Internal Tool Inc. Internal Tool,Inc. reserves the right to place any past due account on hold until all past due invoices are paid.

Past Due Accounts

Return PolicyAny discrepancies in shipments recieved by you must be reported immediately. Suchmerchandise will not be accepted by us for return unless assigned a return authorization number.Any merchandise returned must be accompanied by a copy of our invoice indicating our returnauthorization number. Any merchandise that has been misused, abused, or is otherwise in non-saleable condition, will not be accepted for return by Internal tool, inc. Merchandise returned thatis found to be in compliance with the aforementioned policy will be refunded the full purchaceprice, subject to a reasonable restocking charge. Merchandise will not be accepted for returnafter 30 days from receipt.

Internal Tool, Inc. will not honor any credit that has not been expressly issued by Internal Tool,Inc. Any payments recieved that are found to be short paid for any reason without a credit issuedby Internal Tool,Inc. will be promptly returned to the customer. The customer will have theiraccount put on hold, or their shipping status changed to COD, at the discretion of Internal Tool,Inc. until the invoice has been cleared.

Credit Policy

Telephone OrdersTelephone orders are accepted at the risk of the purchaser and shipments made before receipt ofconfirmation are for the special convenience of the customer. Internal Tool Inc. is notresponsible for any shipping errors incurred as a result of a telephone order.

Special OrdersOrders for items marked as "specials" or items not stocked by Internal Tool, Inc. are consideredspecial orders. Special items are subject to minimum order quanities and/or special handlingcharges with allowable over/under-run of 10%. All special orders are non-canceable and specialorders manufactured per print or instruction are non returnable.

Backordered ItemsAll Backordered items will be shipped in the same manner as the items on the original purchaseorder, unless specified in writing by the customer.

Shortage or ErrorAll claims for shortages or shipment error must be made within 10 days after reciept of shipment.invoice number and EDP number must be referanced. Our liability is limited to replacement ofmerchandise or refund of purchase price, at the discertion of Internal Tool Inc.

TERMS AND CONDITIONS

Date post:	25-May-2020
Category:	Documents
Upload:	others
View:	18 times
Download:	0 times

Metalworking Machine Tools Supplier & Equipment …...10-1085 10-1090 10-1095 10-1100 10-1105...

Documents