Figure x.x: Location selected from Google Maps

Methodology

1) Go to the location selected (as shown in Figure 3.1) during rainy days

Figure 3.1: Jalan Pakis 12, Taman Sri Pulai

2) Sample was collected in 1.5 liter water bottle and the method of sampling is shown in

Figure 3.2 below

Figure 3.2: Method of sampling

3) Sample was collected (as shown in figure 3.1) based on three conditions:

a. Directly after first flush (10 minutes earlier)

b. During mid-rain

c. During heavy rain

4) Analysis of turbidity, total suspend solids and BOD5 was conducted on the sample

5) The data is recorded and discussed