Metro Cell Solutions Product Portfolio · Metro Cell Solutions Product Portfolio. ... • Slide-In...

Metro Cell Solutions Product PortfolioWireless Product Solutions

Rev. 2/2017 PRELIMINARY

This Ordering Guide and the information contained within is confidential and restricted for INTERNAL USE only. If you have received this Ordering Guide in error, any use, reproduction, or dissemination is strictly prohibited.

This page intentionally left blank.

For more information, visit commscope.com

CommScope MetroCell Solutons Ordering Guide Outdoor Small Cell Solutions

As data demands skyrocket, so does the demand for bigger capacity — and that means more cell sites in more places. But when zoning restrictions, site acquisition difficulties and “not in my backyard” local opposition make conventional cell sites unwelcome and unworkable, it’s time to think small.

CommScope MetroCell Solutions are the perfect fit in these challenging environments; providing high performance in capacity-sensitive, data-driven, dense urban environments where small size and low visual impact are imperative. CommScope offers a wide selection of solutions to choose from, with different heights, sizes and appearances to meet the needs of each unique situation.

CommScope offers several MetroCell solutions including but not limited to:

- Existing Pole Concealment Solutions - Stand-alone solutions designed to mount on existing poles and structures in right-aways.

- MetroCell Complete Site Solutions - Complete sites delivered by a single part number, providing everything except the RAN equipment.

- Wood Power Pole Concealment and Mounting Solutions - Mounts and concealments designed for power transmisison telecom wood and steel pole structures

Features• Employs state-of-the-art and patent pending technologies providing

excellent RF performance and efficient equipment thermal management

• Custom color and apearance options for those difficult zoning areas.

Benefits• Help meet regulatory restrictions and avoid neighborhood opposition

• Optional pre-tested, pre-assembled and certified before delivery forfaster, more efficient installation

• Offer potential lease savings compared to traditional macro sites

• Add capacity to improve data throughput, leading to increasedcustomer satisfaction

- Antenna Concealment Solutions - Concealment of panel antennas using state of the art soft-shell concealment materials for improved RF performance.

http://www.commscope.com/


MetroCell Solutions

MC-SP-WAE-17-002-01

SSC‐760224725

Wrap‐Around Radio Concealment Enclosure Pole-mounted enclosure for up to three 5W metro cell radios

Introduction

This document describes the CommScope wrap-around equipment concealment solution.

The wrap-around equipment concealment is specifically intended for use with 1-5 Watt metro cell radios connected via CPRI or GbE backhaul.

Enables attractive concealment and securing ofall site equipment on standard street lightingstructures

Accepts most manufactures’ 2W and 5W radiosas well as backhaul termination

Application

The CommScope wrap-around concealment is intended to be used with 1-5W metro cells and standard street lighting structures where low-visual impact is desired.

Highly-flexible configuration can house diplexers,arrestors, splitters, backhaul and powerequipment, etc.

Mounts to tapered and non-tapered poles of up to9-inches (228mm) in diameter

Single person installation

Convection cooled per GR-487 Requirements

System Dimensioning & Configuration

Height / Diameter 30.5 in. (775mm) / 27.0 in. (686mm)

Assumes pole diameter of 6 in. (140mm)

System Weight 60lbs. (27kg) with no radio equipment installed. Approx 120lbs (55kg) fully loaded

Approximate wind loading Max. 457 N (103 LBF) at 150 km/hr.

Min. / Max. Acceptable Pole Diameter 4.5-9 in. (113-203mm)

Finish UV-resistant powder coat; standard finish color is RAL 7035 light gray Additional colors available

• Zero ground footprint meets needs ofsmaller rights-of-way

• Eliminates unsightly cabling whileintegrating backhaul, AC distribution,protection and radios within a single,secure enclosure

• Supports up to three 5W metro cell radios

• Slide-In Diplxer and Surge Arrestormounting options

© 2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information.

Power/Fiber Input 1” Trade Size Conduit Knockouts on the back and bottom of unit

Exclusions Not recommended for use with concrete or metal square poles unless specificstructural analysis is performed

Radio Mounting

Conceals and mounts the following radio configurations: (3) Nokia cMRO radios or (3) Ericsson mRRU/mRBS or (6) Ericsson 2203

Typical Line Drawing (diameter varies slightly depending on pole diameter)

MetroCell Solutions

MC-SP-WAA-16-001-00

SSC‐760205237 Wrap‐Around Antenna Concealment

Mid-pole Mount for (3) V65S-C3-1XR 65 Degree Panel Antennas

Introduction

This document describes the CommScope wrap-around antenna concealment solution.

The wrap-around antenna concealment is specifically intended for use with (3) V65S-C3-1XR panel antennas.

Enables mounting of three high-band dual portantennas on poles between 2.5-6 inches (63-153mm) in diameter

Screens antennas from view while complementingCommScope’s pole-mounted, wrap-around metrocell equipment enclosure

Quasi-Omni version includes (2) Low PIM 3-waysplitters and all associated RF cables.

Bottom Concealment cover to hide cabling andsplitters from ground level

Applications

The CommScope wrap-around antenna concealment is intended to address quasi-omni or 3 sector requirements when mounted below extension arms and luminaires on existing street lighting poles.

Single clamp arrangement permits installationfrom one side of pole

Can be used as a 3-sector antenna or suitsvarious 1-3 panel patterns through rearrangementsplitters


Height / Diameter 39 in. (965mm) / 16.5 in. (419mm)

Assumes pole diameter of 3.0 in. (90mm)

Weight 38 lb. (17kg)

Approximate wind loading Max. 300 N (68 LBF) at 150 km/hr.

Min. / Max. Acceptable Pole Diameter 2.5-8 in. (65-203mm)

Mechanical Tilt Adjustment 4 Degree adjustment (-1 to +3 Degrees) to remove effect of pole taper

• RF Transparent UV-Resistant shrouds

• Aesthetic radome shrouds can bepainted to meet zoning requirements

• Mechanical down tilt adjustment toremove the effects of pole taper

• PIM tested to mounted specifications

MetroCell Solutions

MC-SP-WAA-16-001-00

Typical Line Drawing (diameter varies by pole diameter)


MetroCell Solutions

MC-SP-RE-17-001-00

SSC‐760236114

Radio Concealment Enclosure Pole-mounted enclosure for radio and equipment concealment and protection

Introduction

This document describes the CommScope wrap-around equipment concealment solution.

The wrap-around equipment concealment is specifically intended for use with 1-5 Watt metro cell radios connected via CPRI or GbE backhaul.

Enables attractive concealment and securing ofall site equipment on standard street lightingstructures

Accepts most manufactures’ 2W and 5W radiosas well as backhaul termination

Application

The radio concealment enclosure is intended to be used with 1-5W metro cells and standard street lighting structures where low-visual impact is desired.

Highly-flexible configuration can house diplexers,arrestors, splitters, backhaul and powerequipment, etc.

Mounts to tapered and non-tapered poles

Single person installation

Convection cooled per GR-487 Requirements

Tamper-Resistant and Pad Lockable


Height / Width / Depth 40 in. (1016mm) / 15.75 in. (400mm) / 12 in (305mm)

System Weight 40lbs. (18kg) with no radio equipment installed. Approx 80lbs (36kg) fully loaded

Approximate wind loading Frontal: 454 N (102 LBF) Lateral: 328N (73 LBF) at 150 km/hr.

Min. / Max. Acceptable Pole Diameter 4.5-9 in. (113-203mm) (Larger diameter poles by steel banding)

Finish UV-resistant powder coat; standard finish color is RAL 7035 light gray Additional colors available

Power/Fiber Input Conduit Back: (2) 1” Trade Size Knockouts. Bot: (2) 1 ¼” Trade Size Knockouts

• Zero ground footprint meets needs ofsmaller rights-of-way

• Eliminates unsightly cabling whileintegrating backhaul, AC distribution,protection and radios within a single,secure enclosure

• Supports multiple metro cell radios

• Integrated Diplexer and Surge Arrestormounting options

40.00

12 15.75

(5) 2.00 50.8 KNOCKOUTS FORCABLE ENTRY/EXIT(CROSS-CUT RUBBER GROMMETS INCLUDED)

SHOWN MOUNTED ON AN 8.00 POLECLAMP, STRAP, AND THRU BOLT OPTIONS

1 1/4" TRADE SIZE KNOCKOUTS

3.00

2.50

32.00

4.00

(2) 3.00 KNOCKOUTFOR RF CABLE ROUTING OPTION

1" TRADE SIZE KNOCKOUTS

02/15/17

A

B

C

D

A

B

C

D

4 3 2

4 3 2 1

These drawings and specifications are the proprietary property of CommScope Inc. and may be used only for the specific

purpose authorized in writing by CommScope Inc.

±2°±1/32

A.12.06.031

DO NOT SCALE THIS PRINT

TOLERANCES UNLESS OTHERWISE SPECIFIED:ALL DIMENSIONS ARE IN INCHES U.O.S.

REMOVE BURRS AND BREAK EDGES .005

.XX = ±

.XXX= ±

.X = ± ANGLES FRACTIONS

--

REVISION:

CHECKED BY:

DATE:

FINISH:

WEIGHT

1:10MATERIAL:

SCALE:

ASSEMBLY DRAWINGDRAWING TYPE:

DESCRIPTION:

DRAWN BY:

1 of 1SHEET: PART NUMBER:

SSC-760236114JRC

METROCELL RADIO CONCEALMENT ENCLOSURE

P R O D U C T

S P e C i f i C a T i O n

Commscope’s Radio Shroud Enclosure is designed to house small cell radio and ancillary equipment .

It is an outdoor enclosure which hides high technology communication equipment.

It offers optimal protection against manipulation, vandalism and environmental influences.

This shroud is available in different colors which guarantees an harmonized implementation in the surroundings.

CommScope's MetroCell Stolutions provide all the building blocks to get your outdoor small cells deployed

Outdoor Enclosure for Small Cell Radio EquipmentRadio Shroud Enclosure

The Radio Shroud Enclosure is specially developed in cooperation with the New York Art Commission ensuring a inconspicuous integration into urban areas.

• Possibility of pre-mounting RF,mains, grounding, fiber opticcables, and filtering/diplexing.

• Easy installation and commissioning

• Protection against vandalism

• Inconspicuous design

MetroCell Solutions

S P E C I F I C A T I O N S

www.commscope.comVisit our Web site or contact your local Commscope representative for more information.

© 2017 Commscope, Inc. All rights reserved.

All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of Commscope, Inc. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to Commscope products or services.

Radio Shroud Enclosure Assembly

Radio Enclosure Outline Drawing

Mechanical

Height, width, depth mm (in) . . . . . . . . . . . . 894 x 397 x 228 . . . . . . . . . . . . . . . . . . (35 .2 x 15 .6 x 9)

Weight without RUs, kg (Ib) . . . . . . . . . . . . . 6 (13 .2)

Material . . . . . . . . . . . . . Fiber Glass

Paint Code Options . . . . . . . . . . . . . Brown SW 10049 . . . . . . . . . . . . . Silver SW 26373 . . . . . . . . . . . . . Green SW 14062 . . . . . . . . . . . . . Green SW 14050 . . . . . . . . . . . . . Black SW 27038

Enclosure Ordering Information (Empty Shell - No Mount)

Brown SW 10049 Silver SW 26373 Green SW 14062

. . . . . . . . . . . . .

. . . . . . . . . . . . .

. . . . . . . . . . . . . Green SW 14050 Black SW 27038

. . . . . . . . . . . . .

. . . . . . . . . . . . .

All figures are typical values unless otherwise stated.

CommScope reserves the right to change all hardware and software characteristics without notice.

MC-SP-RSE-17-001-000

ssc-7602350471-SB ssc-7602350471-SCssc-7602350471-SDssc-7602350471-SD2 ssc-7602350471-SE

Brown SW 10049 Silver SW 26373 Green SW 14062 Green SW 14050 Black SW 27038

. . . . . . . . . . . . .

. . . . . . . . . . . . .

. . . . . . . . . . . . .

. . . . . . . . . . . . .

. . . . . . . . . . . . .

Enclosure Ordering Information (Universal Inner Spine with Pole Brackets)

ssc-7602350471-MT-SB ssc-7602350471-MT-SC ssc-7602350471-MT-SDssc-7602350471-MT-SD2 ssc-7602350471-MT-SE

MetroCell Solutions

MC-SP-PTC-16-001-02

SSC‐760233122Pole Top Radio Concealment Antenna Mount Concealment Enclosure for up to four 5W Ericsson metro cell radios

Introduction

This document describes the CommScope pole top radio concealment antenna mount.

The solution is intended to house and conceal up to four 5W metro cell radios directly below a multiband canister antenna.

Application

This solution is specifically intended for use with 1-5 Watt metro cell radios.

As-built, accepts Ericsson mRRU12 and 2203 5Wmetro cell radios.

Orderable to mount multi-band and multi-portantennas from Commscope, Kathrein, andAmphenol

GR-487 thermally verified via convection cooling

Variable pole diameter mounting kits available tomount to existing structures.

Matching light pole or monopole options available

Multiple color options available.

Overall Dimensions and Weight

Height / Diameter / Weight (Without Antenna and Radios) 35 in. (890mm) / 18.0 in. (457mm) / 75lbs. (34kg)

Finish

Galvanized per ASTM A123/A123M finish for all steel components; Aluminum components are RoHS complaint chromate. Concealment covers are powder coated Light Grey - RAL 7035 per specification WL-2356. (Other colors available)

Antenna Compatibility (Orderable PN)

SSC-760233122-1 CommScope RVVPPS or VVPPS SSC-760233122-2 Kathrein 16in Base Dia Series SSC-760233122-3 Amphenol 14.5in Dia Series

Radio Compatibility (Ericsson) (4) model 2203, or (1) Ericsson mRRUS12 and (2) 2203, or (2) mRRUS12

• Pole Top radio concealment and canisterantenna mounting

• Supports up to four 5W metro cell radios

• Includes integrated grounding bar, polemounting and RRU mounting hardware.

Line Drawing – Component Specifications


MetroCell Solutions

MC-SP-PTC-16-002-00

SSC-760235601Pole Top Radio Concealment Antenna Mount Concealment Enclosure for up to four 5W Ericsson 2203 metro cell radios

Introduction

This document describes the CommScope pole top

radio concealment antenna mount.

The solution is intended to house and conceal up to

four 5W metro cell radios directly below a multiband

canister antenna.

Application

This solution is specifically intended for use with 1-5

Watt metro cell radios.

As-built, accepts Ericsson (4) 2203 5W metro cell

radios.

Orderable to mount multi-band and multi-port

antennas from Commscope, Kathrein, and

Amphenol


Variable pole diameter mounting kits available to

mount to existing structures.




Height / Diameter / Weight

(Without Antenna and Radios) 35 in. (890mm) / 15.0 in. (381mm) / 60lbs. (27kg)

Finish

Galvanized per ASTM A123/A123M finish for all steel components;

Aluminum components are RoHS complaint chromate. Concealment

covers are powder coated Light Grey - RAL 7035 per specification WL-

2356. (Other colors available)


SSC-760233122-1 CommScope RVVSSP or VVSSP

SSC-760233122-2 CommScope NH Seres (12in dia)

SSC-760233122-3 Kathrein 16in Base Dia Series, Amphenol 14.5in Dia

Radio Compatibility (Ericsson) (4) Ericsson model 2203


• Supports up to four 5W metro cell radios

• Includes integrated grounding bar, pole

mounting and RRU mounting hardware.


© 2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.

All specifications are subject to change without notice. See www.commscope.com for the most current information.


MetroCell Solutions

MC-SP-PTC-16-002-00

SSC‐760235604Pole Top Radio Concealment Antenna Mount Concealment Enclosure for up to three 5W Ericsson 2203 metro cell radios

Introduction

This document describes the CommScope pole top radio concealment antenna mount.

The solution is intended to house and conceal up to four 5W metro cell radios directly below a multiband canister antenna.

Application

This solution is specifically intended for use with 1-5 Watt metro cell radios.

As-built, accepts Ericsson (3) 2203 5W metro cellradios.

Orderable to mount multi-band and multi-portantennas from Commscope, Kathrein, andAmphenol


Variable pole diameter mounting kits available tomount to existing structures.




Height / Diameter / Weight (Without Antenna and Radios) 21 in. (533mm) / 15.0 in. (381mm) / 36lbs. (16kg)

Finish

Galvanized per ASTM A123/A123M finish for all steel components; Aluminum components are RoHS complaint chromate. Concealment covers are powder coated Light Grey - RAL 7035 per specification WL-2356. (Other colors available)


SSC-760235604-1 CommScope RVVSSP or VVSSP SSC-760235604-2 CommScope NH Series (12in dia) SSC-760235604-3 Kathrein 16in Base Dia Series, Amphenol 14.5in Dia

Radio Compatibility (Ericsson) (3) Ericsson model 2203



• Includes integrated grounding bar, polemounting and RRU mounting hardware.

MC-SP-PTC-16-002-00



Product Specification

SSC-760230037 Soft-Shell ConcealmentTri-sector Dual-band Concealed antenna Solution

(698-896 MHz - 1695-2360 MHz)

Construction Materials

Radome: Concealment Fabric Precontraint

Radome: Support Plate Hot Dip Galvanized Steel

Radome: Rod, Nuts, Washers Hot Dip Galvanized Steel

Pole Steel Hot Dip Galvanized Steel

Antenna Bracket Hot Dip Galvanized Steel

Mechanical

Dimensions (hxd) mm 1895 x 584

Weight Kg 100

Azimuth Fixed

Survival wind speed Km/h

Wind Loading

Color

200

821 N @ 150Km/h / 185 lbf @ 150Km/h -

Electrical

Antenna type 3 x SBNHH-1D65A

Isolation (dB) 23

Return Loss (dB) 13

Passive Intermodulation (dBc) -143 (2x +43dBm in band carriers)

Environmental and Mechanical Tests

73BSAWI-2050: Environmental Test and Test Methods IEC 60068-2-64: Random Vibration

ETS-300 019-2-1: Environmental Test Storage IEC 60068-2-6: Sine Vibration

ETS-300 019-2-1: Environmental Test Transportation IEC 60068-2-5: Part 2- Simulated Solar Radiation

ASTM E8M: Tensile Test IEC 60068-2-31: Rough Handling Shocks (Drops)

MIL-STD 810G: Blowing Wind IEC 60068-2-11: Salt Fog


MetroCell Solutions

© 2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the most current information.

MetroCell Complete Site Solutions Complete Site Solutions Utilizing CommScope’s MetroCell Concealment and RF Products

Introduction

This document describes CommScope MetroCell complete site solutions.

Utilizing state of the art CommScope concealment, steel, RF, fiber and antenna products, these solutions are delivered to a site with everything needed to get the MetroCell on-air!

Application

Standard configurations for repeatable,consistent build out of MetroCells.

Single part number ordering simplifies logistics.

Consistent designs increase speed to market andreduce the zoning approval cycle.

Faster installations mean more sites installed inless time and on air sooner. Reduced labor costs.

Factory testing and integration options available.

Mulitple color and height options

Engineered poles and foundation designs PEstamped for all 50 states.

Scalable for future upgrades

LED Luminaire and support arm options

0 0

16 393.7

54 1371.6

73 1841.5

120 3050.3

153 3886.2

296 7518.4300 7620

318 8071.4 RAD CENTER

330 8379.5

149 3771.9

BB

AA

SSC-760235352-25 METROCELL, CONCEALMENT MTG POLE, 6IN OD, 25FT

COMMSCOPEV360-QS-GC3-3XR (HIGH BAND QUASI)F4-HMHR-4M5-SGW-D (4) RF Jumpers - Antenna to Diplexer

SSC-760232884 METROCELL, W-A Enclosure SSC- 760235655KIT, METROCELL W-A DIPLEXER AWS-PCS WITH RRU RF JUMPERS

RF CABLE ROUTING PORT HOLE

AC DISTRIBUTION ACCESS PORT

AC METER ACCESS PORT

INPUT ACCESS PORT

AC DISTIBUTION PANELSQUARE-D Q02L40RBCP (2) POSITION - (4) DEVICE(OPTIONAL 6 POSITION CONFIG)

ANTENNA ACCESS PORT HOLE

11.00 279.4REF

11.00 279.4 REF

R2.00 50.8REF

1.25 31.75(4) HOLES ON

10.625" DIA BOLT CIRCLE

SECTION B-BSCALE 1 : 25

26 660.4REF

SECTION A-ASCALE 1 : 25

AC METERMOUTING(OPTIONAL)

REVISIONSREV. DESCRIPTION BY DATE00 PRELIMINARY RELEASE JRC 01/10/2017

12/21/16

A

B

C

D

A

B

C

D

4 3 2 1

4 3 2 1



±2°±1/32

00.12.06.031




.XX = ±

.XXX= ±


--

REVISION:

CHECKED BY:

DATE:

FINISH:

WEIGHT

NTSMATERIAL:

SCALE:


DESCRIPTION:

DRAWN BY:


JRC

METROCELL, W-A POLE SOLN, AWS-PCS 28FTSSC-760235889-28

16 409

AA

SSC-760235352-25METROCELL, CONCEALMENT MTG POLE, 6IN OD, 25FT

COMMSCOPEV360-QS-GC3-3XR (HIGH BAND QUASI) SHOWN3X-V65S-C3-3XR (HIGH BAND TRI-SECTOR)RVVSS-360S-F (12 PORT MULTIBAND)OR EQUIVALENT 17IN DIA X 2FT TALL MAX CANNISTER ANTENNA

SSC-760236114METROCELL, CONCEALMENT ENCLOSURECBC-1923T-43-2X QUAD AWS-PCS DIPLXER(8) F1A-HMHM-1M-P-SGW RF JUMPERS(4) F1A-HMHM-4.5M-P-SGW RF JUMPERS

AC LOAD CENTER ACCESS PORT1-1/4" NPT OPPOSITE SIDE

AC METER ACCESS PORT3/4" NPT OPPOSITE SIDE

INPUT ACCESS PORT


1.25 31.8(4) HOLES ON A

10.625" BOLT CIRCLE 11 279.4

11 279.4


12 303.1

0 0

54 1371.6

72.50 1841.5

120 3057.6125 3175

153 3886.2

160 4073.6

300 7620

318 8071.4

330 8379.5

15.50 393.7

295 7502.5

AC LOAD CENTERDISCONNECT

SQUARE-D Q02L40RBCP (2) POSITION - (4) DEVICE


RF CABLE ROUTINGPORT HOLE

CABLE ENTRYPORT HOLE

REVISIONSREV. DESCRIPTION BY DATE00 PRELIMINARY DESIGN JRC 02/01/2016

12/21/16

A

B

C

D

A

B

C

D

4 3 2 1

4 3 2 1



±2°±1/32

00.12.06.031




.XX = ±

.XXX= ±


--

REVISION:

CHECKED BY:

DATE:

FINISH:

WEIGHT

NTSMATERIAL:

SCALE:


DESCRIPTION:

DRAWN BY:


JRC

METROCELL, ENCLOSURE CONCEAL SOLNSSC-760236115-28

18 457.2

10.75 273.1

0 0

10 254

54 1371.6

72 1816.1

296 7518.4

347 8810.9RAD CENTER

360 9140.6

300 7620

335 8515.9 ANTENNA MOUNT

AA

SSC-760235355-25METROCELL, CONCEALMENT MTG POLE10 3/4" IN OD, 25FT TALL

ANTENNA (NOT INCLUDED)COMMSCOPE RVVSS-360S-F (12 PORT MULTIBAND)KATHREIN 6-PORT OMNI PN 80010784 (SHOWN)OR EQUIVALENT 17IN DIA X 2FT TALL MAX CANNISTER ANTENNA

SSC-760233122METROCELL, POLETOP RRU CONCEALMENTF1A-HMHM-1M-P-SGW (6) RRU TO ANTENNA RF JUMPERS



INPUT ACCESS PORT

AC DISTIBUTION PANELSQUARE-D Q0816L100RBCP8 POSITION - 100AMP LOAD CENTER



TRANSITION SHROUD (OPTIONAL)

15.00 381REF

15.00 381 REF

1.12 28.5(4) HOLES ON



REVISIONSREV. DESCRIPTION BY DATE01 CHANGED HEIGHT TO 30FT JRC 01/27/2017

12/21/16

A

B

C

D

A

B

C

D

4 3 2 1

4 3 2 1



±2°±1/32

01.12.06.031




.XX = ±

.XXX= ±


--

REVISION:

CHECKED BY:

DATE:

FINISH:

WEIGHT

NTSMATERIAL:

SCALE:


DESCRIPTION:

DRAWN BY:


JRC

METROCELL, SOLN - POLE TOP - 10IN X 30FTSSC-760236028-30

10.75 273.1

0 0

10 254

54 1371.6

72 1816.1

296 7518.4


360 9144

300 7615.2


AA


ANTENNA COMMSCOPE RVVSSP-360S-F (12 PORT MULTIBAND) (SHOWN)OR EQUIVALENT 17IN DIA X 2FT TALL MAX CANNISTER ANTENNA




INPUT ACCESS PORT





15.00 381REF

15.00 381 REF

1.13 28.58(4) HOLES ON



REVISIONSREV. DESCRIPTION BY DATE00 INITIAL RELEASE JRC 01/27/2017

12/21/16

A

B

C

D

A

B

C

D

4 3 2 1

4 3 2 1



±2°±1/32

00.12.06.031




.XX = ±

.XXX= ±


--

REVISION:

CHECKED BY:

DATE:

FINISH:

WEIGHT

NTSMATERIAL:

SCALE:


DESCRIPTION:

DRAWN BY:


JRC


10.75 273.1

0 0

10 254

54 1371.6

72 1816.1

296 7518.4


345 8759.7

300 7615.2


AA


ANTENNA COMMSCOPE RVVSSP-360S-F (12 PORT MULTIBAND) (SHOWN)OR EQUIVALENT 17IN DIA X 2FT TALL MAX CANNISTER ANTENNA




INPUT ACCESS PORT





15.00 381REF

15.00 381 REF

1.13 28.58(4) HOLES ON



REVISIONSREV. DESCRIPTION BY DATE00 INITIAL RELEASE JRC 01/27/2017

12/21/16

A

B

C

D

A

B

C

D

4 3 2 1

4 3 2 1



±2°±1/32

00.12.06.031




.XX = ±

.XXX= ±


--

REVISION:

CHECKED BY:

DATE:

FINISH:

WEIGHT

NTSMATERIAL:

SCALE:


DESCRIPTION:

DRAWN BY:


JRC


MetroCell Solutions


SSC-760236498 Modular Integrated Concealment Pole Concealed antennas and remote radio heads in a configurable slim-line package

Introduction

This document describes the CommScope modular concealment pole with integrated remote radio heads.

Measuring 24 inches in diameter, this solution is intended to conceal a series of remote radio heads, antennas and ancillary equipment in a customer configurable solution.

Application

Modular design allows for flexibility with a consistent appearance. Customer defines radio and antenna requirements and an orderable solution will be configured.

• High Power and Low Power remote radio headconcealment options.

• Antenna concealment solution utilizesCommScope’s soft-shell radome technology forimproved RF performance with improvedaccessibility and weight

• Configured solution can be factory pre-assembledand pre-integrated or shipped in module sectionsfor field assembly.

Specifications

Diameter/ Height 21 in. dia slim line pole configurable to a max AGL of 50ft

Antenna Concealment Soft-Shell radome module with spring tensioning system - 6ft Tall CommScope SBNHH-1D65A or NHH-1D65A antennas pre-integrated (Other antenna options available; limited to outside radome diameter)

Equipment Concealment High Power Radios: (2) in a 4ft tall concealment module Low Power Radios: Up to (6) in a 3ft tall concealment module RF Conditioning, Fiber/Power Distribution – 2ft tall concealment module

Finish Galvanized per ASTM A123/A123M finish for all steel equipment; Concealment radomes and panels are RAL7035 light grey per specification WL-2356 (other colors available)

MC-SP-IPS-17-001-00


2'-0

" 4

'-0"

3'-0

" 6

'-0"

2'-0

"

50'

-0" M

AX

AG

L

24"

SOFT-SHELL RADOMEANTENNA CONCEALMENT MODULE(1) OR (2) TRI-SECTOR MODULESSBNHH-1D65A OR NHH-1D65ACONCEALED ANTENNAS(6FT TALL MODULE)

RF CONDITIONING MODULEMOUNTING FOR DIPLEXERS AND/OR 3-WAY SPLITTERS(2FT TALL MODULE)

LOW POWER RADIOCONCEALMENT MODULEMOUNTING FOR UP TO (6) LOW POWER 5W RADIOS (3FT TALL MODULE)

HIGH POWER RADIOCONCEALMENT MODULEMOUNTING FOR (2) HP RADIOSAND AC/DC RECTIFIER MODULES(4FT TALL MODULE)

FIBER & POWER OVP/DEMARCCONCEALMENT MODULEAC AND FIBER DISTRIBUTION(2FT TALL MODULE)

BASE MOUNTING POLEMULITPLE LENGTH OPTIONS

00 PRELIMINARY RELEASE 03/09/17 JRCREV DESCRIPTION DATE APPROVED

REVISIONS

1 OF 1

JRC

READRVRW

03/09/2017

UNLE

SS O

THER

WIS

E SP

ECIF

IED

DIME

NSIO

NS A

RE IN

MILL

IMET

ERS

INTE

RPRE

T PE

R IS

O ST

ANDA

RDS

HAND

BOOK

,TEC

HNIC

AL D

RAW

INGS

,VO

LUME

S 1 &

2, T

HIRD

EDI

TION

(200

2)

CE

WORK AREAECN

DRAWING SHEETMODEL

SCALE

SIZE

A4 REVISIONSTATUSVERSION REVISIONSTATUSVERSION

DOCUMENT NO.

NTS

TITLENAME DATE

C 2016 CommScope, Inc. Confidential

2601 Telecom PkwyRichardson, TX 75082PH: 972-207-4984

SSC-760236498

MODULAR INTEGRATED CONCEALMENT POLE

CUSTOMER DEFINED REQUIREMENTS CONFIGURED THRU

THE MODULE SIZES AS SHOWN

MetroCell Solutions

MC-SP-WPB-17-001-01

SSC‐760189456 Wood Pole‐Bracket with Shroud Bracket with shroud for up to three cMRO 5W metro cell radios

Introduction

This document describes the CommScope wood pole bracket with shroud.

Measuring 21 inches (533mm) high, this solution is intended to house up to three ALU/Nokia radios within the tight confines of the communications space typically residing on joint use wooden utility poles.

Application

This solution is specifically intended for use with three 5 Watt metro cell radios connected via common public radio interface (CPRI) either directly to dark fiber or via coarse wave division multiplexing (CWDM).

As-built, accepts three ALU/Nokia cMRO radios.

Enables attractive concealment and securing ofsite equipment on common utility poles

Anti-gouge mounting bracket distributes loadevenly to mitigate bracket from loosening overtime



Height / Width / Depth to face of pole 21 in. (533mm) / 18.5 in. (470mm) / 22.4 in. (569mm)

Weight (without equipment) 45 lbs. (20kg)

Finish Galvanized per ASTM A123/A123M finish for all mounting hardware;shroud is powder coated Sepia Brown - RAL 8014 per specification WL-2356 (other colors available)

Allocated climb space 5 in. (127mm)

Securing method to pole Thru-bolted to pole, using included 5/8” threaded rod hardware kit.

Optional banding/hose clamp mounting provisions included in bracket

• Zero ground footprint meets the needs ofsmaller parkways and easements

• Designed to fit within the space typicallyallocated beneath the electrical supplyand communications lines


• Includes integrated grounding bar and allpole mounting and RRU mountinghardware.

Typical Line Drawing with (3) Nokia/ALU cMRO 5W Radios


MetroCell Solutions

MC-SP-WPB-17-004-01

SSC‐760233189 Wood Pole‐Bracket with Shroud Bracket with shroud for up to five Ericsson 2203 5W metro cell radios

Introduction

This document describes the CommScope wood pole bracket with shroud.

Measuring 21 inches (533mm) high, this solution is intended to house up to five Ericsson 2203 radios within the tight confines of the communications space typically residing on joint use wooden utility poles.

Application

This solution is specifically intended for use with five 5 Watt metro cell radios connected via common public radio interface (CPRI) either directly to dark fiber or via coarse wave division multiplexing (CWDM).

As-built, accepts four 2203 radios with spaceavailable for an additional equipment such as anadditional 2205 radio, diplexer or fiber demarc.





Height / Width / Depth to face of pole 21 in. (533mm) / 18.5 in. (470mm) / 22.4 in. (569mm)

Weight (without equipment) 50 lbs. (22.6kg)

Finish Galvanized per ASTM A123/A123M finish for all mounting hardware;shroud is powder coated Sepia Brown - RAL 8014 per specification WL-2356 (other colors available)

Allocated climb space 5 in. (127mm) separate





• Supports up to five 5W metro cell radios

• Includes integrated grounding bar and allpole mounting and RRU mountinghardware.

Typical Line Drawing with (4) Ericsson 2203 5W Radios and (1) 2205 LAA Radio


MetroCell Solutions

MC-SP-WPB-17-005-01

SSC‐760233189NSCompact RRU Wood Pole‐Bracket Bracket for up to five Ericsson 2203 Radios

Introduction

This document describes the CommScope wood pole bracket.

Measuring 20.6 inches (524mm) tall, this solution is intended to house up to five Ericsson 2203 radios within the tight confines of the communications space typically residing on joint use wooden utility poles.

Application

This solution is specifically intended for use with 5w RRUs connected via common public radio interface (CPRI)

As-built, accepts four 2203 RRUs with additionalmounting space on the front to mount a fifth 2203or 2205 radio and/or diplexer.



Optional concealment shroud available


Height / Width / Depth to face of pole 20.6 in. (524mm) / 12.7 (322mm) / 16.0 in. (406mm)

Weight (without equipment) 31.5 lbs. (14kg)

Finish Galvanized per ASTM A123/A123M finish for all mounting hardware

Allocated climb space 7 in. (152 mm)

Securing method to pole Thru-bolted to pole, using included threaded rod hardware kit.




• Supports up to five 5W remote RRHs

• Includes grounding bar and all polemounting and RRU mounting hardware.

Typical Line Drawing with (4) Ericsson 2203 5W RRUs and (1) 2205 LAA Radio


MetroCell Solutions

MC-SP-WPB-17-002-02

SSC-760235419RRH Wood Pole-Bracket with Shroud Bracket with shroud for up to two Ericsson 40/60W RRU11 or RRU12 Radios with PSU

Introduction

This document describes the CommScope wood pole

bracket with shroud.

Measuring 28 inches (711mm) tall, this solution is

intended to house up to two high power Ericsson radios

within the tight confines of the communications space

typically residing on joint use wooden utility poles.

Application

This solution is specifically intended for use with 40-

60W remote radios heads connected via common

public radio interface (CPRI)

As-built, accepts the Ericsson 40W and 60W

remote radio heads (RRU11 and RRU12) and

Ericsson PSU modules

Enables attractive concealment and securing of

site equipment on common utility poles

Anti-gouge mounting bracket distributes load

evenly to mitigate bracket from loosening over

time



Height / Width / Depth to face of pole 28 in. (711mm) / 27.5in. (699mm) / 26 in. (660mm)

Weight (without equipment) 87 lbs. (39.5kg)

Finish Galvanized per ASTM A123/A123M finish for all mounting hardware;

shroud is powder coated Sepia Brown - RAL 8014 per specification WL-

2356 (other colors available)

Allocated climb space 4 in. (102mm)





• Supports up to two 60W remote RRHs


Typical Line Drawing with (2) Ericsson RRHs and Ericsson PSU

© 2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.

All specifications are subject to change without notice. See www.commscope.com for the most current information.


MetroCell Solutions

MC-SP-WPB-17-003-01

SSC‐760235419NSDual RRH Wood Pole‐Bracket Bracket for up to two Ericsson 40/60W RRU11/RRU12/RRU32 Radios with PSU

Introduction

This document describes the CommScope wood pole bracket.

Measuring 20.6 inches (524mm) tall, this solution is intended to house up to two high power Ericsson radios within the tight confines of the communications space typically residing on joint use wooden utility poles.

Application

This solution is specifically intended for use with 40-60W remote radios heads connected via common public radio interface (CPRI)

As-built, accepts the Ericsson 40W and 60Wremote radio heads (RRU11/RRU12/RRU32)and Ericsson PSU modules



Optional concealment shroud available


Height / Width / Depth to face of pole 20.6 in. (524mm) / 23.75in. (603mm) / 23.2 in. (591mm)

Weight (without equipment) 57 lbs. (26kg)

Finish Galvanized per ASTM A123/A123M finish for all mounting hardware

Allocated climb space 6 in. (152 mm)





• Supports up to two 60W remote RRHs


Typical Line Drawing with (2) Ericsson RRUs and Ericsson PSU


www.commscope.comVisit our website or contact your local CommScope representative for more information.

© 2017 CommScope, Inc. All rights reserved.

All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to CommScope products or services.


Date post:	24-Apr-2018
Category:	Documents
Upload:	hoangtuyen
View:	329 times
Download:	16 times

Metro Cell Solutions Product Portfolio · Metro Cell Solutions Product Portfolio. ... • Slide-In...

Documents