Date post: | 11-Dec-2015 |
Category: |
Documents |
Upload: | vu-anh-tuan |
View: | 4 times |
Download: | 1 times |
Metropolis® AM U
Next Generation MultiService Provisioning Platform
Ng Chin ChiongTechnical SalesAPAC [email protected]
Lucent Technologies - Proprietary2
Presentation Outline
Metropolis AMU
– Product overview
– Feature set
– Physical Layout
Metropolis AMU Applications
Metropolis AMU Rollout
Lucent Technologies - Proprietary3
Metropolis® AMU Overview
Very cost-effective CPE/Access TDM for full flexible STM-1/4 CPE applications
STM-1/4 CO access applications
Optimized for transport of circuit and packet based services
Full flexible architecture supporting Terminal, Add/Drop and LXC applications
Point to point, dual homing and ring access
All variants for PDH/SDH and Ethernet interface types
Cost/function tailored configurations
Lucent Technologies - Proprietary4
Metropolis® AMU – Positioning
155M
622M
2G5
10G
40G
CPE Access Metro CoreMetro Core
Metropolis® ADM (Universal Shelf)
Metropolis® ADM (Compact Shelf)
Metropolis® AMS
Metropolis® AM
Ap
pli
cati
on
Lin
e R
ate
Metropolis® AMU (2m/4o)
Metropolis® AMU (1m/1o)
LambdaUnite MSS
Lucent Technologies - Proprietary5
Metropolis® AMU - Target Applications
STM-1/4 Regional/Metro core hub node Ring closure architecture enables cost effective hub
applications
Upgrade option to STM-16 line rate without shelf exchange
Full range of low speed interfaces for direct drop (up to 252 E1’s per subrack)
Protected or unprotected Fiber to the Business Applications
Point to point, dual homed or ring CPE access applications
Leased line access
PBX traffic
Data features ranging from simple LAN interconnect up to complex Virtual Private Networks (VPN) by using TransLAN®
Lucent Technologies - Proprietary6
Key Features of Metropolis® AMU
Full flexible LXC architecture with Cost optimized main board / option cards concept
Optional main board equipment protection
Full non-blocking VC-4/3/12 switch matrix on main board
Optical interfaces STM-1, STM-4, (future STM-16, GBE)
Electrical Interfaces E1, E3, DS1, DS3, E/FE/GBE, SHDSL
Fits 300 mm depth construction
Strictly front access
Lucent Technologies - Proprietary7
Key Features of Metropolis® AMU
Synchronization Management acc. G.813 option 1 STM-N timing, G.781 reference switching, external I/Os
Protection 1+1 MSP between any pair of STM-4 or STM-1 interfaces
SNC/N protection for VC-12/3/4 cross connections
Main board protection for cross-connect, power & timing
SDH fault and performance monitoring All standard parameters, counters and bins available
Near & bi-directional monitoring on VC-12/3/4 level
Integrated into Lucent management systems DCC/Q-LAN support with IS-IS level 2
Lucent Technologies - Proprietary8 M
ain
bo
ard
(c
ont
rolle
r, s
witc
h,
clo
ck,
po
we
r (
w))
op
tion
ca
rd
Ma
in b
oar
d (
sw
itch
, clo
ck,
pow
er
(p
))
op
tion
ca
rd
op
tion
ca
rd
op
tion
ca
rd
210mm
224mm
30
0m
m
Metropolis® AMU - Physical Design
300 mm depth construction
2 shelf variants for cost/function application tailoring
2m/4o with protection option
2 main (protection), 4 option slots
2 systems will fit in one row of a 19” rack
8 systems per 2.2m, 300mm bay
1m/1o optimized for low cost CPE
1 main, 1 option slot Both shelf supporting all applications
No fans in ETSI class 3.1E environment
Strict front access
Ma
in b
oar
d
(co
ntro
ller,
sw
itch
, cl
ock
, p
ow
er
(w
))
op
tion
ca
rd
30
0m
m
88mm
210mm
2m/4o:
1m/1o:
Lucent Technologies - Proprietary10
Metropolis® AMU – Main Board
Fully non-blocking VC-4/3/12 switch fabric (76 STM-1)
Backplane capacity of 10 * VC-4 towards each option slot
DC power supply
Timing
System Controller
2 x STM-1/4 and 2 x STM-1 SFP optical line interfaces STM-1 SFPs: S1.1, L1.1, L1.2
STM-4 SFPs: S4.1, L4.2
Lucent Technologies - Proprietary11
Metropolis® AMU - Option Cards
63 x E1 ports (120 & 75 Ohm variants available)
E/FE/GBE private line (full rate throughput)
– 2 x 10/100 Base-T ports
– 2 x 10/100/1000 Base-T or 2 x GBE (SX, LX SFP based)
– VC-4/3/12 GFP mapping and LCAS for each WAN port
– 4 x E1 (120 & 75 Ohm)
E/FE/E1 private line (full rate throughput)
– 4 x 10/100 Base-T ports
– VC-3/12 GFP mapping and LCAS for each WAN port
– 32 x E1 (75 Ohm)
All option cards fit in a single option slot of each shelf
Lucent Technologies - Proprietary12
Legacy Option Cards
Support of already existing Metropolis® AM / AMS option cards via slot adapter
Available only for 2m/4o shelf, consumes 2 option slots
16 x E1 ports
16 x DS1 ports
2 x E3 ports
2 x DS3 ports
4 x 10/100BASE-T ports switched
8 x 10/100 Base-T ports private line
Lucent Technologies - Proprietary13
Presentation Outline
Metropolis AMU
– Product overview
– Feature set
– Physical Layout
Metropolis AMU Applications
Metropolis AMU Rollout
Lucent Technologies - Proprietary14
Central Office Customer Premises
CPE / Access Applications
AMS
E1/DS1, E3/DS3, X.21 E/FE SHDSL
STM-1/4
SDH AccessNetwork
Navis™ Optical Management Solution
STM-1/4 E1 E/FE, GBE
STM-1
STM-1/4 E1/DS1, E3/DS3 E/FE, GBE SHDSL
STM-1/4
Lucent Technologies - Proprietary15
Metropolis® AMU – Data Access
STM-16/64
STM-4
STM-4
Navis™ Optical Management Solution
E1
GBEAccessRouter
PBX
STM-4
E1
FE
AccessRouter
PBX
AccessRouter
PBX
E1
GBE
MetropolisADM
MetropolisADM
E1
FE AccessRouter
PBX
STM-1
STM-1 AMS
AMS
E1
FE AccessRouter
PBX
Digital SwitchDigital Switch
ISP Edge Router
nxE1
GBEMetropolis
ADM
• Tailored equipment solution for each application size• Various interface types and LO grooming enabling
bandwidth efficient access services, i.e. • Leased lines• Ethernet VPN & internet access in an single
homogenous and managed network
Minimal CAPEX & OPEX
E1
GBE AccessRouter
PBX
STM-4
Lucent Technologies - Proprietary16
Network Termination (NT) Application
SDH Network
Operator Managed Customer Managed
Client InterfaceSTM-N (Working)
STM-N (Working/Protecting)
Reasonable NT Types and Interface Combinations• STM-1 (unprotected / protected) STM-1 / E/FE• STM-4 (unprotected / protected) STM-4 / GBE• 2 x STM-4 (unprotected) GBE (full rate)
Navis™ Optical Management Solution
SDH AccessNetwork
Lucent Technologies - Proprietary17
E1/TU-12 Extensions over SHDSL for Mobile or Business Applications
UMTS/MobileE-1
E-1
BTS
BTS
12
Third partyNTU
E-1
12
1
Mobile Switch Services
SHDSL
Local loop
(copper lines)
SDH Access
ring
Third partyNTU
1
E-1
SME
MSC
EnterprisePhysical Link
Logical Links
BTS
E-1
AMS
AMS NTU AMS
AMU
Third partyNTU
BTS
E-1
SHDSL
1.5,2,34,45 Mbit/s, STM-1/4, 0/100BASE-T, SHDSL
AMU
SHDSL (ITU-T G.991.2) transmission of E1 or TU-12 over twistedcopper pair for up to 3.5 km reach in local loop for GSM/UMTS simple base station interconnection to SDH network or
multiple operator BTS access application when BTS requires multiple E1’s Businesses Interconnection (standard E1 or ISDN PRI)
Lucent Technologies - Proprietary18
Presentation Outline
Metropolis AMU
– Product overview
– Feature set
– Physical Layout
Metropolis AMU Applications
Metropolis AMU Rollout
Lucent Technologies - Proprietary19
Metropolis AMU R1.0
Main board with 2 pluggable STM-1/4 line interfaces
Support of the 2 extra STM-1 interfaces
SFP on main/new tributary cards for
– STM-1 short haul (S1.1)
– STM-1 long haul (L1.1)
– STM-1 long haul (L1.2)
– STM-4 short haul (S4.1)
– STM-4 long haul (L4.1)
– STM-4 long haul (L4.2)
Shelf Options
– CO version: 2xmain 4xoption card slots
– CPE version: 1xmain 1xoption card slot
Protection
– HW prepared for main board protection
– VC-12 / -3 / -4 SNC/P
– 1+1 MSP on STM-1/4 interfaces
X-connects
– Full VC-4-4c, VC-4, VC-3, VC-12 connectivity between trib and agg interfaces
– full non-blocking 16x16 LO connectivity
Legacy option card support from AM/AMS
– Double width adapter card to support legacy option cards in CO version
– 8 x LAN Board optimized for Ethernet Private Line with LCAS (X8EPL)
Tributary cards
– Single width E1 units resulting in a maximum of 252 E1s per system; synchronous, asynchronous, ISDN-PRI
– 63xE1 with RJ45 (120Ohm)
– 63xE1 with RJ45 (75Ohm)
Network Management
– ITM-CIT support
– ITM-SC R11.3
Lucent Technologies - Proprietary20
Metropolis AMU R2.0
Additional Interface support:
– Support of the 2 extra STM-1 interfaces on main unit
– STM-1 SFP for single fiber working
Additional legacy card support:
– 4 x 10BASE-T/100BASE-TX (X4IP)
– 16 x E1 Dual Impedance (75/120 Ohm) synchronous -asynchronous / ISDN-PRI
– 16 x DS1
– 2 x E3
– 2 x DS3
TransLAN™ features
– VPN tagging with standard protocols & provisionable Ethertype
– Double tagging on network LAN port
– Customer WAN port operation mode
– Increased IEEE VLAN instances
New tributary cards
– Single slot, full rate Ethernet private line with
• 2 x E/FE (TX)
• 2 x E/FE/GBE (TX/optical SFP)
• 4 x E1 (75/120 Ohm)
– GBE SFP for SX, LX and ZX
– Single slot, full rate Ethernet private line with
• 4 x E/FE (TX)
• 32 x E1 (75 Ohm)
Protection
– Main unit protection (XC, transmission)
Network Management
– ITM-CIT support
– ITM-SC R11.4
– OMS R3.2
– SNMP Management (AMS R5.0 feature set)