5 YEAR/10,000 HOUR EXTENDED WARRANTYEPSMETSO EQUIPMENT PROTECTION SERVICES

WARRANTY

Industry firstThe standard Equipment Protection Services (EPS) warranty on Metso equipment is a first in the industry, and sets a new benchmark for crushing and screening equipment support.The Metso EPS warranty extends the standard factory warranty from 1-year/2,000 hours to 2-years/4,000 hours. The additional 3 year extension covers major components of the equipment for the full 5-year/10,000 hour period.The inclusion of the EPS in your purchase is Metso and Pilot Crushtec’s commitment to its valued customers indicating our confidence in the Metso product range. It provides you with added protection and peace of mind for your valuable assets.Equipment Protection Services comprehensive plan includes extended warranties, inspections** by Metso-certified technicians and Metso Metrics Services (the remote monitoring data visualisation solution for mobile equipment).

Extended warranty coverage Warranty conditions

Up to 2-years/4,000 hours:Standard warranty coverage.

• Commissioning and warranty registration completed by Pilot Crushtec technician at equipment start-up.

• Use of genuine Metso spare and wear parts purchased through Pilot Crushtec International.

• Standard inspection every 1,000 operating hours (minimum)**.

• Maintenance log filled and maintained.• Service and maintenance completed according to

Metso specifications.

From 2-years/4,000 hours up to 5-years/10,000 hours:Parts coverage of selected main components.

Year 1Year 2

Year 3Year 4Year 5

5 YEARS/10,000 HOURSEXTENDED WARRANTY

EPS component coverage: Full 5 years/10,000 hours

C-series jaw crushers: C80 / C96 / C100 / C106 / C116 / C120 / C125 / C130 / C150 / C160 Crusher frame, pitman, eccentric shaft, bearings and flywheels.

GP-series cone crushers: GP100 / GP220 / GP330 / GP550 / GP100S / GP200S / GP300S / GP500S / GP7 Upper frame & intermediate frame, lower frame, head, main shaft, gear & pinion and countershaft.

HP-series cone crushers: HP100 / HP200 / HP300 / HP400 / HP500 / HP3 / HP4 / HP5 / HP6 Bowl & adjustment ring, main frame, head, main shaft, gear & pinion and countershaft.

VF-series feeders:VF561 / VF661 / VF866 Basic model assembly, coil springs, spring brackets, cardin shaft, flanges & jack shafts, MV vibrators and gears.

CVB screens: Complete range Screen box, basic model assembly, coil springs, spring brackets, MV vibrators, cardin shaft and flanges.

LT-series: LT96 / LT106 / LT120 / LT120E / LT130E / LT220D / LT330D / LT1213 / LT1213S / LT200HPLT200HPS / LT300 etc. Main components of the installed crusher, main frame conveyor frames and final drives, hopper walls, gearbox and hydraulic motors.

ST-series:ST2.3 / ST2.8 / ST3.5 / ST3.8 / ST4.8 / ST620 Main frame, conveyor frames and final drives, screen main assembly, screen shaft, bearings and housings, MV vibrators, cardin shaft and flanges.

TWISTERTRAC VS350E

5 YEARS/10,000 HOURSEXTENDED WARRANTY

Metso Metrics/remote monitoringMetso Metrics helps to better manage your equipment.

Securely access your data 24/7 from anywhere

Stay connected to your fleet through geolocation***

Make decisions based on the right data

Stay ahead of the curve with your maintenance

Improve safety and best practices

Quickly generate reports you need

Leverage the expertise at your service

Secure your most valuable assetsBy focusing on preventative maintenance, with the use of 100% OEM parts as needed, an EPS plan helps you pro-actively manage and reduce the risk of machine failure throughout the warranty extension period. At no additional cost, the added logging capabilities of Metso Metrics Services, on selected machines, also helps you track critical service events, so you can plan ahead and further reduce risks and downtime. EPS warranty helps you secure the value of your asset and ensure maximum performance of your Metso equipment.

Standard on all Metso equipment*

All reasonable steps have been taken to ensure the accuracy of the publication, however, due to Pilot Crushtec International’s policy of continual product development, we reserve the right to make changes in specifications shown herein or improvements at any time without notice or obligation. All capacities and feed sizes are provided as an application aid only. No warranties are expressed or implied.

www.pilotcrushtec.com | sales@pilotcrushtec.co.za | 011 842 5600

Standard 5 year/10,000 hour extended warranty*The on-going support and commitment to the industry from both Pilot Crushtec and Metso has always provided reliable after-market support and parts supply. With a 10,000m² factory located in Boksburg, Pilot Crushtec carries a full complement of Metso spares and wear parts to support all Metso mobile and static equipment across the sub-Saharan Africa region.As a leader in the industry, Pilot Crushtec is committed to bringing value to our clients. With the standard EPS on all Metso products sold by Pilot Crushtec, our commitment is clear, with our client’s operational performance and confidence in our equipment at it’s core.

*Metso EPS extended warranty, valid on all new Metso equipment sold by Pilot Crushtec International.**Technician inspections every 1,000 hours: Costs charged separately. ***Dependant on local countries data laws.Terms and conditions apply.

5 YEARS/10,000 HOURSEXTENDED WARRANTY