Date post: | 14-Jun-2015 |
Category: |
Technology |
Upload: | interlatin |
View: | 505 times |
Download: | 2 times |
3070 User Group
Meeting 2012
3070 AUTOMATION READY
Agilent Measurement System
Division
Sam Wong TS
Business Development Mgr
September 14, 2012
1
2
Agenda
2
1. Agilent ICT and Automation
2. Agilent Automation Partners (IPTE)
3. Agilent Automation Partners (JOT)
3
Agilent ICT and Automation
• Developed EFS in the early 1990s, which are STILL being used today
• Partnered with Handler expertise (such as JOT and IPTE) since late 1990s, with numerous worldwide installations, especially in Europe
• All the handshake commands are included in the Testmain
• Resurface the Automation needs in 2010s, with a major customer engagements
• Continue to examine the current automation needs
3
Automation Considerations for ICT
4
• Footprint requirement for better floor space utilization
• Equipment layout to cope with volume fluctuations
• System configurations (node counts, power supplies, controller, on board programming, etc)
• Ergonomic display, keyboard, emergency switch, signal towers
• Board flow, load and unload positions, conveyors, buffers
• Connection to Board Handlers (component height, stoppers, scanners)
• Program debug, fixture fine tuning and change over time
• For inline operations, cycle time optimization for line balancing.
• Manufacturing trend
Front View
Rear View
Customizing an ICT To meet your needs
• Built on the industry leading i3070 Series 5 In-circuit Tester platform
• Enabled by the brand new ASRU N measurement engine and 12 MPS pin cards
• Automation focus with small footprint: 1028mm (L) x 751mm (H) x 764mm (D)
• Single module with 1,296 nodes count
* This product is not for general sales as there are many
customized parts and on going redesign changes
5
66
Customizing an ICT To meet your needs
* This product is not for general sales as there are many
customized parts and on going redesign changes
Use in production testing with Handler Integration with the Handler
7
Medalist i327x Series 5, a Small Foot Print Systems
Key Features (E9901E)
Medalist i327x 1 Module ICT System
Single Bank with 1 POD
POD holds the Controller and PDU
907mm (H) x 1238mm (W) x 794mm (D)
Maximum of 1296 test nodes
Key Features (E9905E)
Medalist i327x 2 Module ICT System
Single Bank with 2 PODs
PODs hold the Controller, PDU and DUT Power Supplies
907mm (H) x 1658mm (W) x 794mm (D)
Maximum of 2592 test nodes
88
A Slimmer Medalist i327x Series 5
Agilent Restricted
99
A Slimmer Medalist i327x Series 5, E9901EL
Agilent Restricted
Available Today – to meet your needs
10
Overall Layout of System
More discussions - Rotating concept
11
Unscrew cards from
top and open rear doorSlide out card cage and
rotate upwardsOpen card cage door
and pull out cards
More discussions - Rotating concept
12
Your solution
EXPERTS IN
FACTORY AUTOMATION
In-Line Solutions for Agilent Test Systems
13
14
15
MFT Multi Function Test Handler
• MFT is designed to automate test systems
• ICT or Functional Test Handler
– ICT Free-Standing Systems
• Over the top (bridge 2400 or 1800)
– 19” Rack Mount Test Systems
• Integrated
• Flexible In-line Solutions
– Single Lane / Dual Lane
– Single Well / Dual Well
– Integrated Bypass in Handler
EXPERTS IN
FACTORY AUTOMATION
buffer MFT buffer
• PCB Width: 40 - 254 mm Dual Lane
40 - 588 mm Single Lane
• PCB Length: 40 - 560 mm
• Top-Side Clearance: max 170 mm
• Bottom-Side Clearance: 50 mm
• Press-On Force: 5 kN / 10 kN / 15 kN
• Transport Height: 940 – 965 mm
• Product Weight: 2.5 kg
1616
1717
1818
20
In-Line MFT Bridge 2400
EXPERTS IN
FACTORY AUTOMATION
In-Line Solutions for Agilent Test Systems
21
In-Line MFT Bridge 1800
EXPERTS IN
FACTORY AUTOMATION
2222
2323
2424