+ All Categories
Home > Documents > Mg Krete Presentation

Mg Krete Presentation

Date post: 22-Jul-2015
Category:
Upload: evcglobal
View: 1,115 times
Download: 2 times
Share this document with a friend
7
MG-KRETE An inexpensive, two component CONCRETE repair kit DISTRIBUTED BY: EVC GLOBAL (919) 373-4102 [email protected] www.evcglobal.us
Transcript
Page 1: Mg Krete Presentation

MG-KRETEAn inexpensive, two component CONCRETE repair kit

DISTRIBUTED BY: EVC GLOBAL

(919) 373-4102

[email protected]

www.evcglobal.us

Page 2: Mg Krete Presentation

Sidewalk Repair

Page 3: Mg Krete Presentation

Driveway Repair

Driveway was resurfaced with decorative STAMP & COLOR

Page 4: Mg Krete Presentation

Curb & Step Repair

Page 5: Mg Krete Presentation

Bridge Repair

Page 6: Mg Krete Presentation

Technical Sheet• MG-Krete is a two component repair product that restores structural integrity

back into the repaired concrete structure

• No minimum quantity to mix: Mix product in bucket to conserve product and use for small repairs

• One kit (50lb bag & Activator) will cover 45sqft at 1/8” thickness

• MG-Krete reaches 2254psi with 50 % aggregate and 2639psi neat with no aggregate in 45 minutes. It reaches 11,190psi in 28 days.

• MG-Krete can be used in horizontal, slope and vertical applications

• MG-Krete can be used to repair deep pours, damaged curbs, gutters and stairs with or without forming

• MG-Krete can be used in all extreme temperatures with the use of a retarder or accelerator

• MG-Krete has no minimum depth requirements. MG-Krete can do feather edge to a deep pour over all cement materials to include over existing MG-Krete

Page 7: Mg Krete Presentation

Technical Sheet continuation• No multiple steps exists in order to mix MG-Krete

• MG-Krete has no critical mix ratio; Mix wetter or stiffer depending on the repair

• General loading is 45 minutes with MG-Krete

• MG-Krete is totally non absorptive to water intrusion and salt resistant; which are two of the primary problems that damage concrete. MG-Krete is not water based and will not absorb water and delaminate

• MG-Krete has a 30 second mix time, work time between 10 to 15 min and can be extended or reduced with retarder or accelerator

• MG-Krete has been used extensively for the past 12 years in Canada, Departments of Transportations, Public Works and Contractors across the country.


Recommended