+ All Categories
Home > Documents > Microcube QSG DI CEE EN 18 - download.p4c.philips.com · Oczyszczanie z pomocą aplikacji Air...

Microcube QSG DI CEE EN 18 - download.p4c.philips.com · Oczyszczanie z pomocą aplikacji Air...

Date post: 01-Mar-2019
Category:
Upload: buixuyen
View: 212 times
Download: 0 times
Share this document with a friend
4
Sleep mode Allergen index from 1 to 12 where 1 indicates best air quality 3-digit display PM2.5 / IAI PM2.5 indicator WiFi indicator Gas indicator Allergen index indicator MicroCube DI CEE_EN 90x127mm When display shows F0 When display shows A3 When display shows C7 Maintenance Time to clean the pre-filters Time to replace NanoProtect filter Series 3 Time to replace NanoProtect filter Active Carbon Turbo speed Filter replace alert Speed 3 Speed 2 Speed 1 Pre-filter clean alert Allergen mode Bacteria & Virus mode NanoProtect filter Series 3 x 2 NanoProtect filter Active Carbon x 2 Pre-filter x 2 2 2 1 1 3 4 3 4 press for 3 seconds to reset after cleaning or replacing accessory ! Good Poor Very poor Fair Connectivity Air Matters Open the app and click “+” on, to connect your device. Please follow the steps in the app. We partner with Air Matters, one of the leading air quality apps. Download and install the app Fan speed Power Auto mode Filter reset Child lock Light dim Control Hold for 3 seconds Hold for 3 seconds: Display switch between PM2.5 / IAI /GAS Sleep Speed 1~3 Turbo Display Air quality ring 4241 210 98433-1 The filter may produce smell after being used for a while because of the absorption of indoor air. Remove the filter and place it where it has direct sunlight and ventilation for several hours. Re-install and try using it again. If the odor remains, please replace the filter. Pollution mode
Transcript

Sleepmode

Allergen index from 1 to 12 where 1 indicates best air quality

3-digit displayPM2.5 / IAI

PM2.5 indicator

WiFi indicator

Gasindicator

Allergen indexindicator

MicroCube DI CEE_EN 90x127mm

When display shows F0

When display shows A3 When display shows C7

Maintenance

Time to clean the pre-�lters

Time to replace NanoProtect �lter Series 3

Time to replace NanoProtect �lter Active Carbon

Turbospeed

Filter replacealert

Speed 3Speed 2Speed 1

Pre-�lter cleanalert

Allergenmode

Bacteria &Virus mode

NanoProtect �lter Series 3 x 2

NanoProtect �lterActive Carbon x 2Pre-�lter x 2

2

2

1

1

3 4

3 4

press for 3 seconds to reset after cleaning or replacing accessory!

Good Poor Very poorFair

Connectivity

Air MattersOpen the app and click “+” on, to connect your device. Please follow the steps in the app.

We partner with Air Matters, one of the leading air quality apps. Download and install the app

Fan speed

Power Auto mode

Filterreset

Childlock

Lightdim

Control

Hold for 3 seconds

Hold for 3 seconds: Display switch between PM2.5 / IAI /GAS

SleepSpeed 1~3Turbo

Display

Air quality ring

4241 210 98433-1

The �lter may produce smell after being used for a while because of the absorption of indoor air. Remove the �lter and place it where it has direct sunlight and ventilation for several hours. Re-install and try using it again. If the odor remains, please replace the �lter.

Pollutionmode

Režim spánku

Index ukazuje kvalitu vzduchu na škále od 1 do 12, kde 1 je nejlepší.

3ciferný displej PM2.5 / IAI

PM2.5 Indikátor prachových

částic

Indikátor WiFi

Indikátor plynu

Indikátor indexu

alergenů

MicroCube DI CEE_CS 90x127mm

Když se na displeji zobrazí F0

Když se na displeji zobrazí A3 Když se na displeji zobrazí C7

Údržba

Zatlačte dva zaklapávací uzávěry dolů a vysuňte před�ltr směrem k sobě

Vyčistěte před�ltr

Je potřeba vyměnit �ltr NanoProtect řady 3

Je potřeba vyměnit aktivní uhlíkový �ltr

Rychlost Turbo

Upozornění na výměnu �ltru

Rychlost 3Rychlost 2Rychlost 1

Výstraha k vyčištěnípřed�ltru

Režim proti alergenům

Režim bakterie a viry

Filtr NanoProtect řady 3 x 2

Aktivní uhlíkový �ltr NanoProtect x 2Před�ltr x 2

2

2

1

1

3 4

3 4

Po čištění nebo výměně příslušenství přístroj resetujte stisknutím a podržením tlačítka po dobu 3 vteřin.

!

Dobrá Špatná Velmi špatnáPřiměřená

Připojení

Air MattersOtevřete aplikaci a kliknutím na “+” připojte své zařízení.Pokračujte podle pokynů aplikace.

Používáme Air Matters, jednu z nejšpičkovějších aplikací pro kontrolu kvality vzduchu. Stáhněte si a nainstalujte aplikaci

Rychlost ventilátoru

Napájení Automatický režim

Resetování �ltru

Dětská pojistka

Tlačítko ztlumení světla

Ovládání

Stiskněte a podržte 3 vteřiny

Podržte 3 sekundy: Přepnutí zobrazení mezi PM2.5/IAI/GAS

Funkce spánkuRychlost 1~3Turbo

Displej

Kvalita vzduchu

4241 210 98433-2

Filtr může po určité době používání vydávat zápach v důsledku absorpce vzduchu z interiéru. V takovém případě ponechte �ltr před dalším používáním na dobře větraném místě na slunečním světle. Pokud zápach nezmizí, �ltr vyměňte.

RežimZnečištění

Tryb snu

Indeks alergenów od 1 do 12, gdzie 1 oznacza najwyższą jakość powietrza

3-cyfrowy wyświetlacz PM2.5 / IAI

Wskaźnik stężenia

PM2.5

Wskaźnik WiFi

Wskaźnik stężenia

gazów

Indeks alergenów

MicroCube DI CEE_PL 90x127mm

Gdy na wyświetlaczu pojawia się kod F0

Gdy na wyświetlaczu pojawia się kod A3 Gdy na wyświetlaczu pojawia się kod C7

Konserwacja

Wyczyść �ltr wstępny

Czas wymienić �ltr NanoProtect serii 3

Czas wymienić �ltr z aktywnym węglem

PrędkośćTurbo

Konieczność wymiany �ltra

Prędkość 3Prędkość 2

Tryb antyalergenowy

Prędkość 1

Konieczność wyczyszczenia �ltra wstępnego

Tryb usuwania bakterii i wirusów

Filtr NanoProtect serii 3 x 2

Filtr z aktywnym węglemNanoProtect x 2Filtr wstępny x 2

2

2

1

1

3 4

3 4

Naciśnij przycisk i przytrzymaj go przez 3 sekundy, aby zresetować urządzenie po zakończeniu czyszczenia lub wymianie �ltrów.

!

Dobra Zła Bardzo złaPrzeciętna

Oczyszczanie z pomocą aplikacji

Air MattersOtwórz aplikację i kliknij symbol “+”, aby podłączyć urządzenie.Wykonaj czynności przedstawione w aplikacji.

Air Matters, to jedna z wiodących aplikacji jakości powietrza, która współpracuje z oczyszczamy Philips.Pobierz i zainstaluj aplikację

Prędkość wentylatora

Zasilanie Tryb automatyczny

Resetowania �ltra

Zabezpieczenie przed dziećmi

Przyciemnienie podświetlenia

Sterowanie

Przytrzymaj przez 3 sekundy

Przytrzymaj przez 3 sekundy, aby przełączyć międzywyświetlaniem stężenia PM2.5/IAI/GAS

Tryb snuPrędkość 1~3Turbo

Wyświetlacz

Pierścień jakości

powietrza

Trybusuwania

zanieczyszczeń

4241 210 98433-3

Z używanego przez dłuższy czas �ltra może wydobywać się nieprzyjemny zapach spowodowany wchłanianiem zanieczyszczonego powietrza z pomieszczenia. Przed dalszym korzystaniem z �ltra zalecamy umieszczenie go na pewien czas w miejscu bezpośrednio nasłonecznionym i zapewniającym dobrą wentylację. Jeśli nieprzyjemny zapach nadal będzie się utrzymywał, zalecamy wymianę �ltra.

Modul nocturn

Indicele alergenilor de la 1 la 12, unde 1 indică cea mai bună calitate a aerului

A�şaj cu 3 cifre PM2.5 / IAI

Indicator PM2.5

Indicator WiFi

Indicator de gaze

Indicele alergenilor în interior

MicroCube DI CEE_RO 90x127mm

Când a�şajul indică F0

Când a�şajul indică A3 Când a�şajul indică C7

Întreţinere

Curăţă pre�ltrul

Este momentul să înlocuieşti �ltrul NanoProtect seria 3

Este momentul să înlocuieşti �ltrul cu carbon activ

Turaţie turbo

Alertă de înlocuire a �ltrului

Turaţia 3Turaţia 2Turaţia 1

Alertă de curăţare

a pre�ltrului

Modul pentru alergeni

Modul bacterii şi virusuri

Filtrul NanoProtect seria 3 x 2

Filtrul cu carbon activ NanoProtect x 2Pre�ltrul x 2

2

2

1

1

3 4

3 4

Apasă timp de 3 secunde pentru a reseta după curăţarea sau înlocuirea accesoriului.

!

Bună Slabă Foarte slabăAcceptabilă

Conectivitate

Air MattersDeschide aplicaţia şi fă clic pe “+” pentru a-ţi conecta dispozitivul.Urmează paşii din aplicaţie.

Colaborăm cu Air Matters, una dintre cele mai renumite aplicaţii pentru calitatea aerului.Descarcă şi instalează aplicaţia

Turaţia ventilatorului

Alimentare Modul automat

Resetare �ltru

Blocare pentru copii

Reglare luminozitate

Control

Apăsare lungă 3 secunde

Ţine apăsat timp de 3 secunde: a�şajul comută între PM2.5/IAI/GAS

Mod inactivTuraţia 1~3Turbo

Ecran

Cerc pentrucalitatea aerului

4241 210 98433-4

Filtrul poate produce miros după un anumit timp de utilizare, deoarece absoarbe aerul din interior. Îndepărtează �ltrul şi amplasează-l într-un loc expus direct la lumina solară şi la o sursă de ventilaţie timp de mai multe ore. Reinstalează-l şi încercă să-l utilizezi din nou. Dacă mirosul persistă, te rugăm să înlocuieşti �ltrul.

Modul pentru poluare


Recommended