Microsoft Word - Sanitary, Water & Gas Installation

SANITARY, WATER & GAS INSTALLATION SOR 1

SCHEDULE OF RATES SANITARY, WATER & GAS INSTALLATION S/N DESCRIPTION UNIT RATE ($)

CD13/SOR-Building, Sanitary & Plumbing/Sanitary, Water & Gas Installation/(1)/[2009 Edition]

UPVC rainwater downpipe fixed to wall with collar brackets:

1 200mm diameter m 19.20

Extra over UPVC rainwater for fittings:

2 200mm connector piece no 34.60

3 200 x 50mm diameter junction no 41.80

4 200 diameter x 275 x 120mm adaptor no 134.40

UPVC fittings for rainwater downpipe:

5 120 x 275mm rectangular elbow no 143.20

6 Rectangular 'Y' branch junction. no 136.60

UPVC pipe for rainwater outlet embedded in concrete floor (concrete measured separately) :

7 200 x 80 x 5mm thick rectangular pipe. m 30.40

8 275 x 120 x 5mm thick rectangular pipe. m 40.30

9 UPVC screw-down domical grating to top of 200mm diameter pipe complete with 240 x 240mm square body.

no 45.20

UPVC waste outlet to 50mm diameter waste pipe comprising of 110 x 110mm square base including jointing to pipe and setting on concrete floor :

10 With dome-shaped screw-in grating cover. no 6.00

11 With flat round screw-in grating cover. no 5.50




UPVC waste outlet with flat round screw-in grating cover and filter including fixing to pipe and setting on concrete floor.

12 150 x 150mm square base to 80mm diameter pipe no 13.60

13 150 x 150mm dome-shaped screw-in grating to 80mm diameter pipe

no 12.30

14 200 x 200mm hinged grating to 100mm diameter pipe. no 5.10

15 100mm diameter UPVC floor waste complete with hopper and 150 x 150mm UPVC hinged grating with round grating cover including jointing to waste pipe and encasing in concrete.

no 47.40

16 80mm diameter stainless steel washout connecting pipe 350mm long with stainless steel flange at one end and welded with and including 150mm diameter x 9mm thick stainless steel collar at mid-length and cast in reinforced concrete structure.

set 300.00

17 28mm diameter stainless steel overflow warning connecting pipe 400mm long welded with and including stainless steel collar at mid-length and cast in reinforced concrete structure.

set 75.40

18 15mm diameter stainless steel flexible connecting pipe 400mm long welded with and including stainless steel collar at mid-length and cast in reinforced concrete structure.

set 5.00

Grade 30 concrete bed and haunching drain pipe with 40mm thick lean concrete bed and all necessary formwork (drain pipes measured separately):

19 400mm wide x overall 400mm thick to 100mm diameter pipe reinforced with BRC A10 WSF reinforcement

m 37.70

20 400mm wide x overall 400mm thick to 100mm diameter pipe reinforced with BRC B10 WSF reinforcement

m 38.80

21 400mm wide x overall 400mm thick to 100mm diameter pipe reinforced with BRC B10 WSF reinforcement and 2 nos. T13 reinforcement bars

m 41.40


m 44.70




23 450mm wide x overall 450mm thick to 150mm diameter pipe

reinforced with BRC B10 WSF reinforcement m 45.80

24 450mm wide x overall 450mm thick to 150mm diameter pipe reinforced with BRC B10 WSF reinforcement and 2 nos. T13 reinforcement bars

m 48.40


m 51.70

Ductile iron pipe with cement lining laid on concrete bed in trench (trench and concrete bed measured separately):




Extra over ductile iron pipe for

29 80mm diameter bend (all angles). no 17.90



UPVC pipe for underground sewer with flexible joints laid on concrete bed in trench (trench and concrete bed measured separately):




Extra over UPVC sewer pipe for fittings:


36 100mm diameter Y-junction. no 11.10








UPVC pipe Class D for soil, waste, ventilation, discharge stacks and down pipes fixed to wall or ceiling with collar brackets :-

42 80mm diameter. m 10.30



45 Standard cast iron street gully including connection, all necessary excavation and concrete surround.

no 297.80

Reinforced concrete Grade 30 inspection chamber/sump overall size 150mm thick walls and bottom slab, 200mm thick top slab including necessary reinforcement and formwork complete with granolithic concrete benching, half round vitrified clay main and branch channels, cement plastering to internal walls, lean concrete base and excavation (inspection chamber/sump cover and frame measured separately):

46 Overall size 1200 x 1000 x 1070mm deep to invert no 553.20

47 Add to last item for each additional 150mm depth. no 53.20





52 Overall size 2100 x 1000 x 1070mm deep to invert. no 860.00





Reinforced concrete Grade 30 inspection chamber/sump overall size 150mm thick walls and bottom slab, 200mm thick top slab including necessary reinforcement and formwork complete with granolithic concrete benching, half round vitrified clay main and branch channels, cement plastering to internal walls, lean concrete base and excavation (inspection chamber/sump cover and frame measured separately) Cont’d:






59 Add to last item for each additional 150mm depth. no 53.10.

60 Grade 30 concrete in bed to base of inspection chamber/sump including necessary formwork. (Reinforcement measured separately).

m3 251,20

61 150mm thick Grade 30 concrete in wall of inspection chamber/sump manhole including all necessary reinforcement and formwork.

m2 83.40

62 150mm thick Grade 30 concrete to slab of inspection chamber/sump manhole, reinforced with approved reinforcement including all necessary formwork and forming opening for frame.

m2 51.20

63 225mm thick (average) granolithic concrete (1:1:1) in benching and haunching to bottom of inspection chamber/sump finished to falls towards channels, including all necessary shaping of channels, bends etc as required.

m2 28.60

64 100mm diameter half round vitrified clay straight or curve main or branch channels to inspection chamber/sump including bedding and jointing in cement mortar (1:1).

m 7.90

65 150mm diameter half round vitrified clay straight or curve main or branch channels to inspection chamber/sump including bedding and jointing in cement mortar (1:1).

m 10.20




66 13mm thick cement and sand (1:2) rendering to internal/external surfaces of inspection chamber/sump.

m2 6.30

67 25kg galvanised cast iron cover and frame for inspection chamber/sump including setting frame in cement mortar and sealing cover in grease and fine sand.

no 34.30

UPVC vent cowl to top of :

68 100mm diameter pipe. no 2.20

69 150mm diameter pipe no 5.10

UPVC soil, waste, ventilation pipes conforming to SS213 discharge stacks and down pipes fixed to wall or ceiling with approved collar brackets :-

70 32mm diameter pipe. m 3.60





Extra over UPVC soil, waste, ventilation, discharge stacks and down pipes for fittings:

75 32mm diameter pipe bend (all angles). no 2.80

76 50mm diameter pipe single branch junction. no 5.20


78 80mm diameter pipe single branch junction. no 6.30


80 80mm x 50mm diameter junction. no 6.30




Extra over UPVC soil, waste, ventilation, discharge stacks and down pipes for fittings (Cont’d):-

81 100mm diameter pipe single junction. no 5.00

82 100mm diameter pipe double junction. no 10.40


84 100mm x 50mm diameter single junction. no 7.50

85 100mm x 50mm diameter double junction. no 10.90


87 100mm x 80mm diameter double junction. no 11.90

88 150mm diameter pipe single junction. no 17.70



UPVC fittings for soil, waste, ventilation, discharge stacks and down pipes:

90 80mm diameter adaptor. no 5.00



Extra over UPVC soil, waste, ventilation, discharge stacks and down pipes for fittings Class D:

93 100mm x 80mm diameter level invert taper. no 5.10

94 150mm x 100mm diameter level invert taper. no 5.05




UPVC end cap to waste pipe:

95 50mm diameter no 2.40



98 100mm diameter UPVC floor waste complete with hopper and 150 x 150mm UPVC grating with screw-in round grating cover and filter including jointing to waste pipe and encasing in concrete.

no 47.70

99 150mm diameter UPVC gully trap complete with hopper and 150 x 150mm UPVC grating, screw-in round grating cover and filter including jointing to waste pipe and encasing in concrete.

no 65.70

100mm diameter UPVC floor trap complete with 150 x 150mm UPVC hinged grating with round grating cover including jointing to waste pipe :-

100 'S' trap. no 21.30

101 'P' trap. no 17.80

UPVC downspout outlet with dome-shaped screw-in grating top complete with all necessary accessories and setting in cement mortar :-

102 With 150 x 150mm square base to 80mm diameter pipe. no 10.60



UPVC waste outlet with flat round screw-in grating top complete with all necessary accessories and setting in cement and mortar







108 UPVC pipe skirting comprising of 112.50mm diameter x 75mm high and 198.50 x 198.50mm square base to base of 100mm diameter pipe including setting in waterproof cement mortar.

no 15.50

109 UPVC pipe skirting comprising of 162.50mm diameter x 75mm high and 198.50 x 198.50mm square base to base of 150mm diameter pipe including setting in waterproof cement mortar.

no 27.60

110 Anti-mosquito device to floor and gully traps. no 2.60

UPVC socket sleeve to reinforced concrete floor opening :-

111 100mm diameter x 136mm high. no 4.60




115 Light duty galvanised cast iron cover and frame size 600 x 450mm for inspection chamber/sump including setting frame in cement mortar and sealing cover in grease and fine sand.

no 40.60

116 Close-coupled white vitreous china wash-down pedestal w.c. suite complete with approved rigid (heavy duty) plastic seat and cover with buffers and hinging devices, white vitreous china 9.0/4.5 litres dual action flushing cistern and all necessary fittings, accessories for fixing and joining to pipeworks.

no 225.00

117 White vitreous china close-coupled single-trap siphonic w.c. suite complete with approved rigid (heavy duty) plastic seat and cover with buffers and hinging devices, white vitreous china 9.0/4.5 litres dual action flushing cistern and all necessary fittings, accessories for fixing and joining to pipeworks.

no 291.00

118 Low level wash-down pedestal w.c. complete with white plastic seat and cover, 9.0/4.5 litres dual action low level plastic cistern and all necessary fittings, accessories for fixing and joining to pipeworks.

no 287.00




Close-coupled low capacity vitreous china pedestal w.c. suite

complete with w.c. bowl, seat and cover and cistern with a flushing capacity of 3.5 to 4.0 litres per single action flush, including all necessary fittings and accessories :-

119 White. no 225.00

120 Coloured. no 246.60

121 Squat w.c. pan in white vitreous china with brass cleaning eye:-

122 With high level dual action plastic cistern complete with all necessary flush pipe, fittings and accessories

no 142.90

123 Without cistern and flush pipe no 94.70

124 High level plastic cistern with capacity for up to 4.5 litres (maximum), complete with overflow connection, stainless steel angles, etc and 32mm UPVC flush pipe and accessories for fixing and jointing to pipework.

no 46.55

125 Close-coupled water saving white vitreous china pedestal w.c. suite complete with w.c. bowl, cistern, internal parts and fittings forming the whole flushing mechanism, seat and cover including all necessary fittings, accessories for fixing and joining to pipeworks.

no 258.10

Close-coupled water saving coloured viterous china pedestal w.c. suite complete with w.c. bowl, cistern, internal parts and fittings forming the whole flushing mechanism, seat and cover including all necessary fittings, accessories for fixing and jointing to pipework:-

126 Olympia TP321/TP311-B no 308.80

127 Saniton Thunia no 271.40

128 Johnson Suisse Environ 3 no 368.00




129 Squat w.c. pan in white vitreous china with brass cleaning eye, 9.0/4.5 litres high level dual action plastic cistern complying to SS68:1984 complete with 20mm diameter overflow connecting and stainless steel angles, 13mm plastic ball valve with plastic arm and float, aluminium alloy lever galvanised steel pull chain and plastic handle, 32mm diameter UPVC flush pipe and clips including cutting and pinning angles and clips to wall, accessories for fixing and jointing and connections to pipework.

no 158.50

130 Squat w.c. pan in white vitreous china with brass cleaning eye,

but without cistern and flush pipe. no 94.70

131 9.0/4.5 litres dual action high level plastic cistern complete with

20mm diameter overflow connection, stainless steel angles, 13mm plastic ball valve with plastic arm and float aluminium alloy lever galvanised steel pull chain and plastic handle, 32mm UPVC flush pipe and clips including cutting and pinning angles and clips to walls, accessories for fixing and jointing to pipework.

no 69.70

132 'Santor' urinal bowl or equivalent complete with 9.0/4.5 litres dual action plastic high level cistern, 20mm diameter overflow connection, 13mm diameter ball valve with plastic arm and float, galvanised steel pull chain and plastic handle, 40mm diameter stainless steel flush pipe and pair of stainless steel angles fixed to wall, the waste fitting comprising of 40mm stainless steel waste pipe and chromium plated bottle trap and accessories for fixing and jointing to pipe work.

no 177.30

133 White vitreous china wall hung urinal bowl complete with high level flushing cistern with stainless steel pipe and all necessary fittings and accessories.

no 166.60

134 Wash-hand basin in white vitreous china size 500 x 400mm with 32mm diameter waste plug and chain, approved stainless steel brackets, 32mm UPVC waste pipe, 32mm UPVC bottle trap with all necessary washers, seals and nuts including cutting and pinning brackets to walls.

no 89.20

Wash-hand basin in coloured vitreous china size 500 x 400mm with 32mm diameter waste plug and chain, approved stainless steel brackets, 32mm UPVC waste pipe, 32mm UPVC bottle trap with all necessary washers, seals and nuts cutting and pinning brackets to walls.

135 Potex WB 2010 no 92.00




Wash-hand basin in coloured vitreous china size 500 x 400mm with 32mm diameter waste plug and chain, approved stainless steel brackets, 32mm UPVC waste pipe, 32mm UPVC bottle trap with all necessary washers, seals and nuts cutting and pinning brackets to walls (Cont’d):-

136 Saniton Vanda no 85.10

137 Johnson Suisse Boston 500 no 62.50

Wash-hand basin with pedestal stand in coloured vitreous china

size 500 x 400mm with 32mm diameter waste plug and chain, approved stainless steel brackets, 32mm UPVC waste pipe, 32mm UPVC bottle trap with all necessary washers, seals and nuts including cutting and pinning brackets to walls.

138 Potex WB 2010 and WB 2008 no 134.50

139 Saniton Vanda no 135.70

140 Johnson Suisse Boston 500 no 108.00

141 600 x 450 x 200mm white fire clay sink complete with stainless steel cantilever angles, washers, seals and nuts, valcantile plug and chrome brass chain and 50mm UPVC waste pipe with 40mm UPVC bottle trap including cutting and pinning angles to wall.

no 351.10

142 1500 x 500mm locally made double bowl single drainer stainless steel sink complying with SS40:1971 and complete with stainless steel cantilever angles, washers, seals and nuts, valcantile plug and chrome brass chain and 50mm UPVC waste pipe with 40mm UPVC bottle trap including cutting and pinning angles to wall.

no 234.20

1500 x 500mm locally made single bowl double drainer stainless steel sink complying with SS40:1971 and complete with stainless steel cantilever angles, washers, seals and nuts, valcantile plug and chrome brass chain and 50mm UPVC waste pipe :-

143 With 40mm UPVC bottle trap including cutting and pinning angles to wall.

no 208.30

144 With 40mm chromium plated 'P' or 'S' trap including cutting and pinning angles to wall.

no 225.90




144 1800 x 500 x 170mm deep double bowl double drainer stainless steel sink complete with cantilever angles and stainless steel brackets, washers, seals and nuts, valcanite plug and chrome brass chain and 50mm UPVC waste pipe, chromium plated 'P' or 'S' trap including cutting and pinning bracket to wall.

no 275.10

145 Approved coloured cultured marble vanity top of non-porous homogeneous polymeric polyester or acylic based material, size 525 x 1200mm with 100mm splashback, 200mm front apron complete with integrated basin, approved single lever mixer tap with pop-up waste, steel brackets, 32mm diameter UPVC waste pipe, 40mm UPVC bottle trap with all necessary washers, seals and nuts including cutting and pinning brackets to walls and accessories for fixing and jointing to pipe work.

no 366.60

146 1500mm wide frameless glass shower screen with 8mm thick clear tempered safety glass single door and fixed panel complete with chrome finished solid brass ironmongery.

no 620.40

ENV approved stainless steel sensor operated flush valve (battery operated) complete with stainless steel outlet flush pipes including fixing and jointing to water supply and fittings:

147 To water closets no 433.00

148 To urinals no 303.70

149 15mm chromium plated brass pillar tap including all necessary accessories for fixing and jointing to pipeworks.

no 19.10

150 15mm chromium plated brass pillar tap with swivel swan neck including all necessary accessories for fixing and jointing to pipeworks.

no 27.20

151 Delay action tap including all necessary accessories for fixing and jointing to pipeworks.

no 118.90

152 15mm chromium plated brass bib-tap including all necessary accessories for fixing and jointing to pipeworks.

no 18.40

153 15mm chromium plated brass 2-way bib-tap including all necessary accessories for fixing and jointing to pipeworks.

no 26.50




154 15mm chromium plated ceramic disc cartridge operated single lever basin mixer tap complete with pop-up waste including all necessary accessories for fixing and jointing to pipeworks.

no 61.60

155 15mm chromium plated sink mixer tap including all necessary

accessories for fixing and jointing to pipeworks. no 85.20

156 150 x 150mm semi-recess white vitreous toilet paper holder

with spring roller including hacking and bedding in wall with cement mortar.

no 13.40

157 150 x 150mm recessed vitreous china soap tray including

hacking, and bedding in wall with cement mortar. no 13.20

Food-grade silicone thimble in natural colour with 4 nos. holes each 2.5mm diameter :

158 Size 18.5mm diameter x 2.5mm thick at basin tap inlet. no 0.10

159 Size 21.0mm diameter x 2.5mm thick for tap mixer. no 0.10

160 15mm diameter constant flow regulator of 12 litres per minute for bib tap inlet at common areas.

no 5.80

Stainless steel water supply pipe including connectors, elbows, bends, tees, reducers, etc and laid in trench including excavation :-






Stainless steel water supply pipe including connectors, elbows, bends, tees, reducers, etc and fixed to roof top with concrete supports :-






Stainless steel water supply pipe including connectors, elbows, bends, tees, reducers, etc and fixed to roof top with concrete supports (Cont’d) :-




Stainless steel water supply pipes including connectors, elbows, bends, tees, reducers, etc, and fixed to wall with stainless steel clips/holderbats :







Concealed copper water pipe to BS EN1057:1996 complete with couplings, connectors, elbows, bends, tees, reducers, etc and fixed to wall with stainless steel clips/holderbats including forming recesses, cutting grooves or chases in walls, columns etc and making good on completion :-







Compression fitting caps for copper pipes :-

181 15mm diameter. no 2.70



Ductile iron pipes and fittings for water mains with cement lining internally including spigot and socket/flanged joints complete with bolts, nuts, washers and gaskets if required :-

184 80mm diameter laid in trench including excavation and backfilling with selected earth.

m 39.80

185 80mm diameter laid in trench including excavation and backfilling with approved granular material.

m 55.90

186 100mm diameter laid in trench including excavation and backfilling with selected earth.

m 40.40

187 100mm diameter laid in trench including excavation and backfilling with approved granular material.

m 56.50

188 80mm diameter pipe/main with flanged joints laid on and including precast concrete support blocks at about 2.7m centres.

m 54.20

189 100mm diameter pipe/main with flanged joints laid on and including precast concrete support blocks at about 2.7m centres.

m 56.90

190 80mm diameter rising main with tyton joints fixed to wall with holderbats.

m 39.00

191 Extra over all 80mm diameter pipe for flanged bends including making necessary extra joints.

no 59.20

192 Extra over all 80mm diameter pipe for tees including making necessary extra joints.

no 82.80




Ductile iron pipes and fittings for water mains with cement lining internally including spigot and socket/flanged joints complete with bolts, nuts, washers and gaskets if required (Cont’d):-

193 Extra over all 80mm diameter pipe for collars including making necessary extra joints.

no 81.80

194 Extra over all 80mm for socket/spigot and flange adaptor including all necessary bolts, nuts and gaskets.

no 23.20

195 100mm diameter rising main with tyton joints fixed to wall with holderbats.

m 41.50

196 Extra over all 100mm diameter pipe for flanged bends including making necessary extra joints.

no 62.10

197 Extra over all 100mm diameter pipe for tees including making necessary extra joints.

no 94.90

198 Extra over all 100mm diameter pipe for collars including making necessary extra joints.

no 95.50

199 Extra over all 100mm for duckfoot bend including all necessary bolts, nuts and gaskets.

no 58.10

200 100mm diameter ductile iron flange adaptor for distribution main complete with rubber gaskets, bolts and nuts.

no 119.70

201 Supply and fix 100mm diameter ductile iron gate valve with flanged ends.

no 147.10

202 100mm diameter x 65mm diameter ductile iron flanged flow nozzle.

no 111.10

203 80mm diameter cast iron sluice/gate valve with flanged ends. no 116.50

204 100mm diameter cast iron sluice/gate valve with flanged ends. no 135.20

205 35mm diameter bronze spring loaded lift check valve. no 20.80

206 40mm diameter brass spring loaded lift check valve. no 28.90

207 80mm diameter cast iron spring loaded lift check valve with flanged ends.

no 313.50




Ductile iron pipes and fittings for water mains with cement lining

internally including spigot and socket/flanged joints complete with bolts, nuts, washers and gaskets if required :- (Cont’d)

208 100mm diameter cast iron spring loaded lift check valve with flanged ends.

no 379.60

209 50mm diameter brass high pressure equilibrium ball valve with brass arm and copper float.

no 378.50

210 100mm diameter brass high pressure equilibrium ball valve with brass arm and copper float.

no 1,144.90

211 40mm diameter brass gate valve. no 28.70

212 50mm diameter brass gate valve. no 37.90

213 20mm diameter brass ball stop valve. no 14.10



216 35mm diameter brass globe valve. no. 38.90

217 25mm diameter brass ball float valve. no 51.30

218 40mm diameter solenoid valve for automatic time-controlled refuse chute flushing system.

no. 347.40

UPVC water pipe with sockets, connectors, and couplings and jointed in approved solvent cement including fixing to wall or ceiling with approved holderbats (bends, elbows and junctions measured separately) :-



221 Extra over 20mm diameter pipe for single junction. no 2.80

222 Extra over 20mm diameter pipe for bend or elbow (all angles). no 2.00




UPVC water pipe with sockets, connectors, and couplings and jointed in approved solvent cement including fixing to wall or ceiling with approved holderbats (bends, elbows and junctions measured separately) Cont’d :-
















238 Labour only for boring holes in UPVC pipes for approximately 3.2m long at 50mm centre/centre for use as bin chute sparge pipe.

no 4.30




Brass high pressure screw down stop or bib cocks :-







245 82mm diameter x 68mm high x 1.2mm thick purpose-made galvanised steel casing as locking device for public tap (padlock measured separately).

no 6.40

246 Rolled steel joists for support to tanks including bolts, fixing and painting.

kg. 1.30

Class 'C' galvanised welded steel gas pipe including sockets, connectors, long screws, backnuts, elbows, bends, tees, reducers, plugs, etc and fixed to wall with pipe claps, mild steel brackets or laid in channel on walls, floor and concrete apron :-











254 63mm diameter polyethylene gas pipe sleeved in 80mm diameter UPVC pipe and laid in concrete channel including bituminous joints and filling up with cement mortar grout (concrete channel measured separately).

m 32.20

255 63mm diameter polyethylene gas pipe sleeved in 80mm diameter UPVC pipe and laid in trench including excavation.

m 20.70

256 63mm x 50mm diameter galvanised steel Electrofusion Transition elbow to gas pipe.

no 39.20

257 80mm diameter UPVC pipe sleeve for vertical gas pipe fixed to wall.

m 7.60

258 ‘Viking Johnson Junior’ coupling for 50mm diameter galvanised steel gas pipe including locking ring, gasket, etc. and all necessary accessories.

no 46.90

Full bore ball valve in accordance with BS 1552 :-








266 UPVC casing/trunking for water and gas services including trunking cover with splayed edges, overall size 84 x 51mm.

m 11.00

267 15mm diameter copper gas pipe to BS EN1057:1996 including connectors, elbows, bends, tees, reducers, etc. and fixed to wall with stainless steel clips/holderbats.

m 10.60

268 22mm diameter copper gas pipe including connectors, elbows, bends, tees, reducers, etc. and fixed to wall with stainless steel clips/holderbats.

m 14.70




269 40mm diameter heavy duty galvanised steel pipe (complying with API Standard 5L Grade B Schedule 40) with welded joints and fixed to wall or ceiling with pipe claps or mild steel brackets.

m 16.70

270 50mm diameter heavy duty galvanised steel pipe (complying with API Standard 5L Grade B Schedule 40) with welded joints and fixed to wall or ceiling with pipe claps or mild steel brackets.

m 18.90

Heavy duty class 'C' galvanised steel pipes for BS 1387 fixed to duct wall as dry wet or hosereel riser main including all necessary brackets, connectors, welded flanges, bolts, nuts and gaskets, etc and testing the installation :-




274 Extra over 50mm diameter pipe for bend or elbow. no 4.60

275 Extra over 50mm diameter pipe for tee. no 5.30

276 Extra over 100mm diameter pipe for bend. no 40.20

277 Extra over 100mm diameter pipe for 100 x 100 x 63.5mm single branch junction.

no 36.90

278 Extra over 100mm diameter pipe for 100 x 50mm bushing/adaptor.

no 13.10


Supply and fix heavy duty class 'C' galvanised steel pipes for BS 1387 fixed to duct wall as dry riser including all necessary brackets and approved welded joints :-

280 Extra over 150mm diameter pipe for bend. no 78.30

281 Extra over 150mm diameter pipe for 150 x 150 x 63.5mm single branch junction.

no 106.80

282 Extra over 150mm diameter pipe for 150 x 50mm bushing/adaptor.

no 30.60




Rust proof electro galvanised steel box with glass front complete with locks and master keys (breeching inlet measured separately):

283 For 2-way breeching inlet no 126.90

284 For 4-way breeching inlet no 139.30

285 100mm diameter 2-way breeching inlet to BS 5041:Part 3 complete with 1 no. 25mm diameter drain valve including all necessary blank caps, chain, handwheel etc.

no 160.50

286 150mm diameter 4-way breeching inlet to BS 5041:Part 3 complete with 1 no. 50mm diameter drain valve including all necessary blank caps, chain, handwheel.

no 291.50

287 Dry riser landing valve with instantaneous 63.5mm diameter female coupling to BS 5041:Part 2 complete with gunmetal bodies to BS 1400 including necessary handwheel, blank caps, chains mechanical tee connectors/adaptors etc.

no 89.70

288 25mm automatic air release valve. no 20.60

289 Approved canvas/nylon belt with key-alike padlocks for strap locking handwheels in closed position.

no 5.00

290 Approved wall mounted double swivel and recessed type fire hose-reel complying to BS 5274 complete with 30m long x 25mm diameter reinforced braided rubber hose, a jet or spray type shut-off nozzle, gun metal control valves, wall brackets and fittings including fixing to wall and painting.

no 339.40

1.6mm thick electro-galvanised steel casing finished in baked red epoxy resin for housing hose-reel and fire extinguishers of complete with all necessary accessories for :-

291 Fire hose-reel. no 197.40

292 2.5 kg fire extinguisher. no 60.20

293 4.5 kg fire extinguisher. no 240.50




Dry powder portable fire extinguisher to SS 232 complete with horn, wall brackets, PSB label :-

294 2.5 kg. no 43.50

295 4.5 kg. no 52.40

296 9 kg. no 67.90

297 5 kg CO2 portable fire extinguisher to SS 232 complete with horn, wall brackets, PSB label.

no 152.70

Date post:	01-Dec-2014
Category:	Documents
Upload:	kokuei
View:	238 times
Download:	7 times

Microsoft Word - Sanitary, Water & Gas Installation

Documents