Midwest 19 2013

By Mary ReedCEG CORRESPONDENT

A recently completed electrictransmission line from Kansas toNebraska has moved into full oper-ation after the first phase, 89 mi.(143 km) of high-voltage linebetween Spearville and the PostRock substation, near Hays, wentinto service in June 2012.The Spearville-Axtell line, com-

monly referred to as the KETAproject, provides additional capaci-ty for the regional high voltage gridfrom Spearville, near Dodge City,through the Hays area (both centersof major demand in westernKansas) and on to Axtell, Neb. TheNebraska Public Power District isresponsible for the Nebraska seg-ment from the Kansas-Nebraskaborder north to Axtell, a distance ofapproximately 53 mi. (85 km).“ITC Great Plains was designat-

ed by Sunflower Electric PowerCorporation and Midwest EnergyInc. to design, construct, own, andoperate the Kansas portion of thisproject. ITC Holdings Corporationis the largest independent electricity

$3.00

4

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

®

MMiiddwweessttEEddiittiioonn

see KETA page 98

The Spearville-Axtell line, commonlyreferred to as the KETA project, providesadditional capacity for the regional highvoltage grid from Spearville, near DodgeCity, through the Hays area (both centersof major demand in western Kansas) andon to Axtell, Neb.

ITC Great Plains KETA ProjectProvides Voltage Grid Capacity

IAAP Hosts Golf Outing,

Donates Proceeds...12

Bobcat Reveals Asphalt

Tool at Demo Event...18

Inside

The equipment rental industry in theUnited States continues to outpace grossdomestic product (GDP) in the UnitedStates by four times in 2013, according toAmerican Rental Association’s (ARA)latest forecast from the ARA RentalMarket Monitor. Revenues will reach$33.5 billion in revenue, representing a

7.0 percent increase over 2012 with rev-enue growth reaching 7.8 percent in thefourth quarter according to the latestquarterly forecast updated July 29, 2013.Economic data and analysis for ARA’sRental Market Monitor is compiled byIHS Global Insight, economic forecast-

Rental Revenue Continuesto Outpace GDP in U.S. in 2013

September 14, 2013 • Vol. IXX • No.19 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910

www.constructionequipmentguide.comPublished Nationally

The chief executive officer of the Associated GeneralContractors of America, Stephen E. Sandherr, issued thefollowing statement in response to the administration’sdecisions to finalize two new employment rules despitefederal data indicating no need for the new measures:“The administration’s decision to finalize two new

oppressive employment regulations for federal contrac-tors forces us to object to measures whose goals we sup-port and objectives our members already meet. That is

New Rules to ForceIncreased EmployerSpending Up to $6B

see RULES page 108

Good weather allowed thesecond phase, the 85 mi.(137 km) segment from

Post Rock to theNebraska border, to becompleted six months

ahead of schedule.

see ARA page 108

Table of Contents................4

Attachment & Parts Section......................................37-39

Snow & Ice Section.......41-47

Recycling Section ........61-77

Truck & Trailer Section ..............................................83-93

Business Calendar ............94

Auction Section ......101-111

Advertisers Index............110

See page 32 for anongoing series of

highlights from pastConExpos as they

were reported in the pages of CEG.

ConExpoRetro

Page 2 • September 14, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Please Contact Bob Williams or Jeff Speer 11200 W Silver Spring Rd. Milwaukee, WI 53225

800/353-1944 414/461-9100 www.FABCO.comOutside WI & Upper Michigan Within WI & Upper Michigan Hundreds of machines. Listings updated daily.

2001 Cat 345BL II..................................$64,500S/N AGS00921, 13,744 hours, EROPS, coupler,

GP-bucket, cylinders good, u/c good

2002 Cat 430D ......................................$43,500S/N BNK02538, 4741 Hrs, EROPS, 1.5 Cyd Bkt,

36” Bkt, Tires Good to Fair

1986 Cat D8L ........................................$67,000S/N 53Y04266, 15,980 Hrs, EROPS, Drawbar, SU

Blade, U/C 50% Eng & Trans Rebuilt at 11,000 Hrs

2008 Cat 140M ....................................$190,000S/N B9M00610, 3194 Hrs, EROPS, 14’ Blade,

Snow Arrangement, Tires Good

2008 Cat 950H ....................................$137,500s/n K5K02145, 10,472 hours EROPS, bucket, hyd coupler, cutting edge, 2 valve HL, AC

2006 Cat 966H ....................................$195,000S/N A6G00225, 7734 hours, EROPS, A/C, GP-bkt,

tires good, engine rebuilt at 7422 hours

2011 Cat 262C........................................$33,000S/N MST03900, 2295 Hrs, EROPS, A/C, Hyd Quick

Coupler, 2-Speed, Bkt, Tires Fair

2003 Hitachi ZX600LC ........................$110,000S/N 004015, 10,484 Hrs, EROPS, Undercarriage

Fair, Coupler, Bkt

2005 Cat 312CL......................................$79,000S/N CBA02430, 3285 Hrs, EROPS, A/C,

9’10” Stick, 36” GP Bkt

1985 Cat D7G ........................................$65,000S/N 92V13015, 5528 Hrs, OROPS, Sweeps, RearScreen, Winch, Angle Blade, U/C Close to Turn

Cat D6M LGP........................................$74,500S/N 2RN00542, 10,328 Hrs, EROPS, PAT blade, winch, rear screen, under carriage good

2001 Cat 988G ....................................$235,000S/N 2TW00170, 21,990 Hrs, EROPS, Spade Bkt

w/Teeth, Tires - 2 Good - 2 Fair

2006 Cat D6NXL..................................$117,500S/N CCK00690, 4756 hours, OROPS, rear screen, 4 valve hydraulics, PAT blade, UC very good

2010 Cat 980H ....................................$195,000S/N JMS05395, 14204 hours, EROPS, ride control,

bucket GP, tires good, center pins done

2007 John Deere 450DLC..................$125,000S/N 913245, 7155 Hrs, EROPS, UndercarriageGood SG Pads, Counterweight Removal, Bkt

1998 Cat 140H ....................................$115,000S/N 2ZK03040, 7242 hours, EROPS, heat,

A/C, tires fair, trans rebuilt

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 14, 2013 • Page 3

Largest Independent RentalFleet in the Midwest!

Illinois Truck & Equipment 320 Briscoe Drive Morris, Illinois 60450 www.iltruck.comToll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected]

Over 700 unitsavailable for rent!

Including: 125 Hydraulic Excavators

Long Reach Excavators

60 Bulldozers

50 Wheel Loaders

Mantis Cranes 30-100 Ton

30 Articulated Dump Trucks

On/Off Road Water Trucks


1


Hydraulic Excavators 125 Including:

leet in the MidFge Larrgest Independent


ors s

leet in the Mider Ovver

est Indep

eswwest!leet in the Mid unit7000

R pendent

est! units

entalR

30

Mantis Cranes 30-100 T

50 Wheel Loaders

60 Bulldozers

Articulated Dump T30

Mantis Cranes 30-100 T

50 Wheel Loaders

60 Bulldozers

rucks T r

on T Ton

ble fvailaa

eor r rent!ble f for r

ent!

oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected] & Equipment 320 Briscoe Drive Morris, Illinois 60450 wwwIllinois T

O O

oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected]

O On/Off Road W rater Tru

ruck & Equipment


suckcks

320 Briscoe Drive

oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected] & Equipment 320 Briscoe Drive Morris, Illinois 60450 www

oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected] & Equipment 320 Briscoe Drive Morris, Illinois 60450 www


Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction EquipmentGuide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes toConstruction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Contents Copyrighted ©2013, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S.Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (includingframing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings,letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are sub-ject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not nec-essarily reflect the policy or opinions of this publication.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsi-ble for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertise-ments are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally andevery effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

IN THIS ISSUESPECIAL SECTION…RECYCLING, CRUSHING AND SCREENINGBe sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.

FEATURES…IAAP HOSTS COMPETITIVE GOLF OUTING, DONATES PROCEEDSA sunny day with more than enough heat welcomed 172 golfers at IAAP’sAug. 26 Golf Outing held at Panther Creek Country Club and Piper GlenGolf Club in Springfield, Ill.

MURPHY TRACTOR & EQUIPMENT HOSTS ANNUALGOLF SCRAMBLE Among many contests for attendees to participate in was a Hole-In-One,with an opportunity to score a John Deere 35D compact excavator.

BOBCAT REVEALS ASPHALT PRESERVATION TOOL ATDEMO EVENT Farm-Rite Equipment of Dassel, Minn., hosted the Bobcat product demoevent at the Hutchinson Mall Parking lot, Hutchinson, Minn., on Aug. 21.

JCB CELEBRATES FACILITY GRAND OPENING Customers were treated to a backhoe rodeo contest, a skid steer ride-and-drive, and the famous JCB Dancing Digger display.

BOBCAT OF GRAND FORKS, DEVILS LAKE, WILLISTON RE- BRANDThe new name, Ironhide Equipment, represents a continued commitment toimproving business practices, as well as strengthening business servicesthey offer.

FABCO CAT CELEBRATES GRAND OPENING OF TWO LOCATIONSDue to exciting growth in business opportunities throughout westernWisconsin, FABCO made the decision to significantly expand its operationsin the area to better fit the needs of its growing number of customers.

CAWGC NAMES SCHOLARSHIP WINNERS The Contractors Association of Will and Grundy Counties’ (CAWGC)Scholarship Chairwoman Becky Fallin, president of RHL Insulation, hasannounced the 17th Annual CAWGC Scholarships recipients.

26

22

18

16

12

61

94 BUSINESS CALENDAR94 CLASSIFIEDS

104 COMING AUCTIONS

EQUIPMENT…84 TEREX TL41P HyPower Truck88 HENDERSON BlackBelt Maxx

16

18

22

48

MIDWEST EDITIONCirculated Throughout • North & South Dakota • Nebraska

• Kansas • Minnesota • Iowa • Missouri• Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

Founder, Publisher & CEO Edwin M. McKeon Sr.Midwest Publisher Joseph S. McKeon

Editor In Chief Craig Mongeau Associate Editor Christine Reckner

Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton

Controller Tom WeinmannCirculation Mgr. Cathy Printz

Main office 470 Maryland Drive Fort Washington, PA 19034

215/885-2900 Toll Free 800/523-2200

Fax 215/885-2910Web site www.constructionequipmentguide.com

Editorial e-mail [email protected] e-mail [email protected]

For advertising rates Contact Joseph S. McKeon

• Illinois • Wisconsin • Northwest Indiana

• Missouri • Kansas

773/769-4090Toll Free 800/632-0233

Fax 773/769-4280e-mail [email protected]

Contact Ed Bryden• Central and Eastern Indiana • Michigan • Ohio

• Kentucky

440/268-9690Toll Free 800/810-7640


Contact Patrick Kiel • Iowa • Minnesota • Nebraska • North Dakota

• South Dakota

952/353-1770Toll Free 866/413-4265


61

48

50

®Mobile LinkedIn Facebook Twitter YouTube

To read these s tories and many more, vis it w w w .construct ionequipmentguide.com



Concept Products CP2000, ’05 ................$13,500

Gomaco Commander III, ’03....................$69,500LeeBoy 1000D, ’03, 1,475 hrs ................$14,500Vogele 1110WB, ’05, 2909 hrs ................$69,500

Dressta 870, ’93, 8,157 hrs ....................$29,500Komatsu GD655-3C, ’06, 1,866 hrs ......$159,500Komatsu GD655-3EO, ’09, 1,287 hrs ....$189,500

Cat 534 Forwarder, ’10 ..........................$135,000Norco Puma 220, ’11, 78 hrs ....................$CALLNorco Puma 409, ’11, 2057 hrs ............$129,500Timbco 415FX, ’09, 2400 hrs ................$310,000Timbco 425EXL, ’06, 9,250 hrs..............$170,000Timbco 425EXL/Quadco Hotsaw, ’06 ....$225,000Valmet 415EX/Rolly II, ’05, 10,092 hrs $145,000Valmet 840.2, ’05, 6,600 hrs......................$CALLValmet 840.3/8, ’08, 10,006 hrs ............$190,000Valmet 860.4, ’12, 1,640 hrs......................$CALLValmet 860.4, ’12, 1,273 hrs......................$CALL

Doppstadt SM720, ’09, 235 hrs ............$185,000Doppstadt SM726, ’09, 257 hrs ............$225,000

Atlas Copco ROC F9-11, ’10 ......................$CALL

Cat 963C, ’01, 4,800 hrs ..........................$66,000Cat D3B, ’86 ............................................$14,500Cat D4D, ’72 ..............................................$7,000Cat D8N, ’87 ............................................$78,000Deere 550H, ’01, 1,580 hrs......................$29,500Dresser TD8E, ’81 ....................................$13,000Komatsu D51PX-22, ’08, 2,436 hrs ............$CALLKomatsu D61PX-15EO, ’12, 431 hrs ......$199,500Komatsu D65EX-17, ’12, 1,340 hrs........$229,500Komatsu D65PX-15EO, ’06, 3,199 hrs ..$146,500Komatsu D65PX-15EO, ’08, 5,372 hrs ..$127,500Komatsu D155AX-5, ’03, 6,809 hrs ......$224,500Komatsu D155AX-6, ’07, 6,011 hrs ......$279,500Komatsu D275AX-5, ’03, 23,015 hrs ....$129,500

Bomag BW130AD, ’88................................$3,900Bomag BW135AD, ’96, 5600 hrs ..............$8,500Bomag BW205AD, ’02, 3,520 hrs ............$34,500Cat CB534C, ’98, 5,086 hrs......................$26,500

Hamm HD8, ’07, 395 hrs ........................$18,500Hamm HD8, ’07, 515 hrs ........................$18,500Hamm HD14VV, ’09, 2,027 hrs ................$32,500Hamm HD14VV, ’07, 2,600 hrs ................$24,500Hamm HD14VV, ’07, 2,264 hrs ................$24,500Hamm HD90 Ozzy, ’04, 4,300 hrs ............$54,500Ingersoll Rand DD70, ’98, 5056 hrs ........$14,500

Wirtgen W60, ’08, 628 hrs ....................$144,900Wirtgen W60 Rumbler, ’11, 400 hrs......$240,000Wirtgen W600, ’03, 2,403 hrs..................$77,500Wirtgen W1000F, ’04, 6,000 hrs ............$134,500Wirtgen W2000, ’96, 9,346 hrs ..................$CALLWirtgen W2100, ’04, 8,373 hrs ..................$CALL

Komatsu HD465-5, ’02, 17,763 hrs ............$CALLKomatsu HD465-5, ’02, 17,599 hrs ............$CALLKomatsu HD465-5, ’02, 17,268 hrs ............$CALL

Case 621D, ’02, 6,822 hrs ......................$59,500Cat 980C, ’86, 7216 hrs ..........................$59,000Cat 980G, ’98, 26,583 hrs ........................$89,500Komatsu WA65-3, ’04, 745 hrs................$59,500Komatsu WA250-1, ’95, 17,158 hrs ........$29,500Komatsu WA250-5, ’05, 4,436 hrs ..........$97,500

Komatsu WA250-5, ’07, 4,885 hrs ..........$99,500Komatsu WA320-6, ’08, 3961 hrs..........$126,500Komatsu WA450-6, ’07, 8,069 hrs ........$149,500Komatsu WA500-7, ’12, 2,696 hrs ............$CALLNew Holland LV80, ’05, 3028 hrs ............$19,500

Deere 225C LC RTS, ’06, 1,884 hrs ......$107,500Deere 350DLC, ’07, 5,837 hrs ..............$124,500Kobelco SK400LC Mark IV, ’97 ................$38,500Komatsu PC88MR-8, ‘09, 1,195 hrs ........$92,500Komatsu PC138USLC-2, ’06, 4,420 hrs ..$69,500Komatsu PC138USLC-8, ’09, 2,363 hrs $104,500Komatsu PC138USLC-8, ’09, 2,583 hrs $104,500Komatsu PC150LC-6, ’99, 6,800 hrs........$32,500Komatsu PC200LC-7, ’04, 7,640 Hrs ......$89,500Komatsu PC200LC-7, ’05, 3,447 hrs......$129,500Komatsu PC200LC-8, ’06, 4,617 hrs......$132,500Komatsu PC220LC-6, ’96, 11,821 hrs......$39,500Komatsu PC220LC-6, ’98, 13,774 hrs......$32,500Komatsu PC220LC-8, ’06, 9084 hrs ........$96,500Komatsu PC300LC-6, ’99, 16,882 hrs......$39,500Komatsu PC300LC-7, ’06, 9,377 hrs........$94,500Komatsu PC300LC-7EO, ’06, 6,271 hrs $109,500Komatsu PC400LC-6LM, ’02, 10,834 hrs $72,500Komatsu PC400LC-7, ’04, 9,350 hrs......$108,500Komatsu PC400LC-7, ’04, 10,300 hrs......$99,500Komatsu PC400LC-7EO, ’06, 9,833 hrs $109,500Komatsu PC600LC-6, ’99, 9,634 hrs........$79,500Komatsu PC600LC-7, ’04, 8,449 hrs......$177,500Komatsu PC600LC-7, ’05, 10,328 hrs....$214,500Komatsu PC600LC-7, ’05, 4,265 hrs......$379,500Komatsu PC600LC-8, ’06, 10,478 hrs....$214,500Volvo EC210B, ’02, 8,880 hrs ..................$46,500Volvo EC240CLR, ’11, 454 hrs ..............$195,500Volvo EC460, ’05, 10,958 hrs ..................$69,500

Komatsu HM300-2, ’06, 6,500 gal ........$275,000Komatsu HM400-2, ’07, 8,000 gal ........$395,000

EXCAVATORS

DOZERS

PAVING

COMPACTION

WHEEL LOADERS

ROCK DRILLS

WATER EQUIPMENT

AIR CURTIN DESTRUCTORS

GRADERS

FORESTRY

SHREDDERS, TROMMELS

OFF ROAD TRUCKS

MILLING

15 Roland Branch Locations in IL, IN, MI, MO, and WI

VISIT

ROLAND MACHINERY.COM

Call Jay Germann (217) 789-7711 • Email: [email protected]

Volvo EX240CLR, ’11, 454 hrs ..............$195,500 Deere 550H, ’01, 1,580 hrs ......................$29,500

Financing Available for Qualified Buyers

Quality Used Equipment...with support to back it up

Komatsu PC400LC-6LM, ‘02, 10,834 hrs..............$72,500 Cat 963C, ’01, 4,800 hrs ................................$66,000


CX130 Excavator

$410/Day, $1,230/Week, $3,690/Month

CX240 Excavator

$700/Day, $2,100/Week, $6,300/Month

CX210 Excavator

$580/Day, $1,740/Week, $5,220/Month

CX460 Excavator

$1,235/Day, $3,705/Week, $11,115/Month

CX160 Excavator

$475/Day, $1,425/Week, $4,275/Month

CX330 Excavator

$875/Day, $2,625/Week, $7,875/Month

CX225 Excavator

$755/ Day, $2,265/Week, $6,795/Month

Excavator Rental Specials

Rent Today!

Clean, reliable equipment Competitive rates Rent by the day, week, or month Delivered to your job site

McCannOnline.com

IllinoisAddison

630-627-0000

Bolingbrook*630-739-7770

Chicago312-942-9200

Crestwood708-597-3110

McHenry*815-385-0420

Wauconda847-526-9444

IndianaSchererville*219-865-6545

* Case authorized dealer location

Serving the Constructor ®

2005 Case 440, s/n N5M406598, 970 Hrs,ROPS, Single Speed, 73” Bkt, 12 x 16.5Foam Filled Tires ............................$15,900

2011 Case SR200, s/n JAFSR200HBM430320,500 Hrs, Cab w/Heat & AC, Hyd Coupler, 72”Bkt, 12 x 16.5 Tires ........................$33,000

Now in stock and ready for your rental needs:Case CX350C 80,000 LB Excavator with auto coupler and Kent 6,000LB F35QT hydraulic breaker.

2006 FFC, s/n 0521019BDC84M, 84” BigDog Pick up Broom for Skid Steer Loader(Like New) ........................................$3,500

2008 Ausa Dumper, s/n 09259426, 110 Hrs,1.37 Cu Yrd Dumper, 13 Hp Hatz Diesel, 2wd..........................................................$7,000

Mark Kruepke • (630) 739-7770Bolingbrook, IL

Contact us at [email protected]

View our complete Used & “Like New” inventoryat McCannOnline.com

McCann Rents a full line of heavy and light constructionequipment. Call us today to supply your next rental.

STARE Q U I P M E N T

LT D .

Call Sales 515-283-2215 • 800-352-54011401 2nd Ave • Des Moines, IA 50314

�CONSTRUCTION EQUIPMENT & SUPPLIESSINCE 1968

CHECK OUT OUR WEBSITE: www.starequip.comDes Moines • Ames • Cedar Rapids • Waterloo

New 2013 IMT DOM2 Service Body 11-FT6000# 22’ Electric-Hydraulic Crane with Radio Remote Controller

H.D. 8-drawer Tool Chest & Basic Shelf Package, Mounted on 2005

FREIGHTLINER M2-106 w/ 250 hp CAT C-7, Auto Trans, Air

Brakes, Air Conditioning, approx.. 160,000 miles. Very Clean Unit!!

Sale Price … $75,056

2005/2007Freightliner

with C-7 CAT250HP 11’ &

14’ Bodies30 days

BARGAIN PRICED

These trucksare handpicked and in Super condition 33K GVWApprox. 150Kmiles

USED EQUIPMENT BARGAINSImagine this truck with a New IMT body & crane

ready to go. We are building several of these units. Since 1985!

CALL JENNIFER TODAY!(888) [email protected]

www.RBusedParts.com

NEW, USED & REMAN PARTS• Undercarriage

• Arms & Booms

• Cylinders

• Valves

• Transmissions

• Pumps

• Engines

• and More!


Milwaukee, WI1-800-236-6900Fax 414-541-1892

Wausau, WI1-800-242-7113Fax 715-675-9748

Crushing & Screening Div.Little Chute, WI1-800-236-8318Fax 920-788-6753

YOUR AUTHORIZED DEALER

in WISCONSIN and UPPER MICHIGAN for:

For information on our in-stock equipment, contact Lanny Peterson at:[email protected] or

mobile 1-715-574-8089 or 1-800-242-7113

AGGREGATE EQUIPMENTALLIS RT2448 PORTABLE JAW PLANT, 1993, with 24”x48” Jaw, 48”x20’ Vibrating Grizzly Feeder, Front DischargeConveyor, Six Hydraulic Legs, Tri-Axle Chassis, Cummins NT855 Diesel with Hydraulic Drives for Feeder & Conveyor............................................................................................................................................................................$185,000JCI K-300 “KODIAK” PORTABLE CONE PLANT, 300 hp electric motor, 36”x 20’ side discharge conveyor, 36”x 35’feed conveyor, motor control panel, hydraulic leveling......................................................................................$375,000POWERSCREEN 510 COMMANDER RINSER SCREEN PLANT, 11.8 Yd. hopper with hydraulic dump grizzly, 36” feedconveyor, 5x10 3-Deck screen, tandem axle, Deutz diesel ..................................................................................$52,400

EXCAVATORSDEMAG H95 MASS EXCAVATOR, Powered by a Cat 3408 Diesel, with a 24’7” Gooseneck Boom, and a 10’8”Stick with 43’6” Reach and 25’ Digging Depth, 7.2 cu yd HD Rock Bucket, Approx. 220,000 Lb. Working Weight,5800 Frame Hours and Recent Engine Rebuild........................................................................................$95,000LIEBHERR R974B HDSL UTILITY CRAWLER EXCAVATOR, Powered by a 471 HP Liebherr D9408TI Diesel,33’11” Semi-Gooseneck Boom with 15’5” Stick, 5 cu yd HD Bkt, 21’x14’ 4” Wide U/C with 30” Track Pads adnRemovable Sideframes, Approx. 190,000 Lb. Working Weight ....................................................................CALLLIEBHERR R954C HD “LITRONIC” CRAWLER EXCAVATOR, (Several 2006-2007 Models Available) w/VariousBoom/Stick Combinations and Buckets Available, 326HP Liebherr D936L Six-Cyl. Tier 3 Diesels, HydraulicallyRemovable Counterweights, 124,000 to 130,000 Lb. Working Weights ......................................................CALL

CRANESGROVE RT760 60 TON CAPACITY ROUGH TERRAIN CRANE, 1993, with Cat Diesel, 110’ Power-Pinned Boom,32’ to 56’ Telescopic Offsettable Swingaway, Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work..$155,900GROVE TM9120 100 TON TRUCK CRANE, 1997, 42’ to 130’ boom, 33’ to 58’ offsettable telescopic swingaway,Grove HO50 main & aux. hoists, LMI, Cummins 6CT8.3 diesel, mounted on a Grove 8 x 4 chassis with aCummins N14 diesel and Roadranger transmissions. Tandem boom dolly ....................REDUCED TO $365,500GROVE RT855B 55 TON ROUGH TERRAIN CRANE, 1996, with Cummins diesel, 37’ to 115’ boom, 35’ to 60’swingaway, LMI, Grove model HO30 main & aux. hoists, 29.5x25 tires ..............................................$189,500LIEBHERR HS883HD DUTY CYCLE HYDRAULIC CRAWLER CRANE, 132 Ton Class, (2 Available) with LiebherrV8 Diesels, Main Hoists with 44,000 SLP or 66,000 SLP, 115’ Main Boom, Removable Sideframes ..........CALL

GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS

• LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLERCRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/

JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAGCRUSHERS • MANITOWOC CRANES

LIEBHERR HS883HD DUTY CYCLEHYDRAULIC CRAWLER CRANEGROVE TM9120 TRUCK CRANE

Large Selection of New & Used Equipment in Stock.

View us at:www.amstate.com

Contact Marty in Illinois1-800-307-0221

[email protected]

Photos & Detail Descriptions view:

www.finkbinerequipment.com

CEDAR RAPIDS CR452 - ‘12 • Rubber Tired, Stretch 20E, Top Con System V, 400 Hrs..$256,183

CEDAR RAPIDS CR662RM - ‘10 • Mat. Transfer Vehicle w/ Hopper Insert, 1250 hrs......$249,982

CEDAR RAPIDS CR662RM - ‘11 • Mat. Transfer Vehicle w/Hopper Insert, 702 Hrs ........$358,300

MAULDIN 1500 - ‘03 • Track, Conveyor Fed, 8’-13’ Screed, 844 Hrs ................................$29,950

NEAL CART PATH PAVER - ‘08 • 5’-8’................................................................................$39,500

CALL items may be on rent causing pricing and hours to vary.

ROADTEC RX400 - ‘11 • 48” Cut, 4 Track, Front Loading, Mill w/803 Hrs ..........................$319,950

WIRTGEN W50 - ‘11 • 20” Cut, 3 Wheel, Rear Discharge Mill w/400 Hrs ......................$129,983

SAKAI SW800II - ‘11 • 67” Dbl Drm Vib, w/remaining standard and EPTW, 234 hrs ......$82,320

SAKAI R2H-2 - 3 Wheel Static Rollers, 83”, *(5) machines in stock starting at (2012 w/415 hrs)

............................................................................................................................................$CALL

SAKAI SW800II - ‘12 • 67” Double Drum Vibratory Rollers, w/85 hrs ..............................$94,393

SAKAI SW850-2 - 79” Double Drum Vibratory Rollers, *2011 w/99 hrs ..........................$99,500

SAKAI SW880 - 79” Double Drum Vibratory Roller, *2012 w/very low hours......................$CALL

SAKAI SW652 - 57” Double Drum Vibratory Roller, *2012 w/164 hrs..............................$79,850

SAKAI SW300 - 40” Double Drum Vibratory Roller, 2009 w/250 hrs ..................................$CALL

SAKAI GW750 - Vibratory Pneumatic Roller, *2011 w/494 hrs............................................$CALL

*Comes with any remaining standard and 3 year extended power train warranty.

GRADALL XL4100 - ‘98 • Workable, As-Is ........................................................................$25,000

GRADALL XL4100II - ‘04 • Trk Mtd. Exc. w/2 Buckets, 5925 Hrs ....................................$129,950

MILLING MACHINES

ROLLERS

PAVERS / ROAD WIDENERS

EXCAVATORS


USED EQUIPMENTAuthorized Bobcat® DealerBobcat 440 ................Starting at $4,500Bobcat 463’s ..............Starting at $8,000Bobcat 542B ..............Starting at $6,900Bobcat 642 ..............................$7,500Bobcat 642B ............................$8,500Bobcat 743 ................Starting at $8,000Bobcat 751 ......Several Starting at $9,900Bobcat 753 ..............Starting at $10,000Bobcat 763F, Series, Open Cab ....$11,500

Bobcat 773G, With Heat ............$15,900Bobcat 843, Heated Cab ............$10,000Bobcat 853’s ............Starting at $11,000Bobcat 863, With Heat ..............$12,900Bobcat 863G ............................14,900Bobcat 873 ............................$17,900Bobcat S130, 2006, Heated Cab ......CALLBobcat S185s, With Heat and Air, 500Hours to 5000 Hours....Starting at $14,900Bobcat S250..............Starting at $17,500

Compact Track MachinesBobcat T190’s............Starting at $17,500Bobcat T200..............Starting at $17,500Bobcat T250, Gold ......Starting at $24,500Bobcat T300..............Starting at $25,000Other BrandsGehl 4615 Skidloader, Open Canopy $8,500Mustang 2105 ............................CALLNew Holland L175........................CALLJohn Deere 250/260 Models Available....................................................CALL

ExcavatorsBobcat 331’s, Several w/Heat & Open

Canopys ..................Starting at $15,900

Bobcat 334 ................................CALL

Bobcat 337D, A/C, HT................$35,900

Bobcat 341 ..............Starting at $29,990

Bobcat 442 ....Several Starting at $45,000

Large Used Trailer Selection Starting at $1,500

Authorized Bobcat® Dealer

NEW M SERIES IN STOCK!

Bobcat Forestry Cutter on T320, for Rent

Largest Selection in the Midwest!

Bobcat Tractors in Stock Now!Call for Pricing.

Ask about Incentives and Financing.

Toolcats in Stock, Call for PricingNew Bobcat S590, Call for Pricing

U.S. Hwy 12 W • Dassel, MN 55325 320/275-2737 • Toll Free 888/679-4857New Location: Farm-Rite Wilmar 1515 West Litchfield Ave. • Wilmar, MN 56201 320/235-3672

www.farmriteequip.com

Bobcat Excavatorsin Stock, Call for Pricing


ALEX E. PARIS CONTRACTING COMPANY, INC.Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820Call Andy Miller Established 1928

Our Greatest Assets .. Our Employees

Cat IT28G, 1998, EROPS, coupler, 3rd valve, 20.5 x 25rubber, 15K hours, work ready . . . . . . . . . . . .$42,500Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . . . .$79,500John Deere 624G, 1996, EROPS, quick coupler, GPbkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$46,000Volvo L60E, 2005, EROPS, coupler, aux hyd, boomsusp, 20.5R25, v. good . . . . . . . . . . . . . . . . . .$89,500

IR SD100D Pro-Pac Vibratory Compactor, 1999,Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500IR SD105DX, 2002, 84" drum, OROPS, clean $69,500IR SD150F, 84" Padfoot, 1998, OROPS . . . . .$49,500IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit,ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68,000Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, verynice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000(4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, allwork ready . . . . . . . . . . . . . . . . . . . . . .From $79,500Multiquip MR8G Walk Behind Vibratory Compactor,1997, Briggs & Stratton 8 HP gas engine . . . . .$2,500Rammax Walk Behind Rollers, over 25 in stock, lever& remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000(8) Sheepsfoot, 48" and 60", double drum & singledrum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500

Case/IH 485 Utility Tractor, 1986, Case 3 cyl dslengine, 55 gal water tank . . . . . . . . . . . . . . . .$10,500Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72"hydraulic broom . . . . . . . . . . . . . . . . . . . . . . .$11,500Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hydangle tongue, scrapers, 2” axles . . . . . . . . . . . .$9,500

Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt .$37,500Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000

Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD,29.5R25, A/C, 29 cy cap. sideboards, tailgate (current-ly off work), work ready . . . . . . . . . . . . . . . .$127,500Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25,working everyday . . . . . . . . . . . . . . . . . . . . .$145,000Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25,A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C,P/S trans, tailgate, work ready . . . . . . . . . . .$115,000Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires,approx 7,000 hrs, good condition . . . . . . . .$147,500Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C,P/S trans, working everyday on jobsites . . . . .$87,500Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C,P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD,23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500

(2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade,winches, v. good . . . . . . . . . . . . . . . . . .$175,000 Ea.Cat D8N, 1991, ROPS, drawbar, S-U blade . .$85,000(2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea.

Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel,10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500Grove RT58C, 1981, down cab, 18 ton r.t., 70' boomanti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500

Cat 613C Water Wagon, 1994, 5000 gal drop tank,ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500Cat 621F, 1996, Scraper, OROPS, 33.25x2, very goodcondition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALLCat 621E, 1989, Scraper, OROPS, 33.25x29, very nice

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL

JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick cou-pler, 6-7000 hrs, Fleet maintained . . . . . . . . .$29,000Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber,operational . . . . . . . . . . . . . . . . . . . . .$10,500/OFFER

Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, longstick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44"Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6"TBG pads, work ready . . . . . . . . . . . . . . . . . . .$57,000(5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . .CALLKomatsu PC160 LC-7KA, 2004, 24” TBG pads, JRBcoupler, plumbed, 8’6” width, nice, work ready . .CALLVolvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick,5.12 cy bkt, 22,000# ctwt, hammer/shear plumbingvery good condition . . . . . . . . . . . . . . . . . . .$159,000

(2) 48' Box Vans w/Liftgates, Good Condition . .CALL

IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL

(12) Allmand Light Plants, 2008-2010, diesel, s/a tow-type, (4) MH lights, excellent . . . . . . . . .From $5,200

Case 580L Rubber Tire Loader Backhoe, 1997,OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500

John Henry Drill Mtd on Cat 320N, 1994, 24' mast,Duraquip dust collection . . . . . . . . . . . . . . . .$150,000

(2) Balderson Broom Attachment for Cat IT Machines,8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea.

BUCKETSPC1000, 84" Digging Bucket . . . . . . . . . . . . . .$9,500Over 100 Excavator, Loader, Specialized & Grapple

Buckets in Stock-Call For Your Needs

FORKS(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style,excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000

Others Available CallPrices Are Negotiable - At Your Inspection

All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.

TRUCKS & TRAILERS

CRAWLER LOADERS

OFF ROAD HAULERS

MOTOR SCRAPERS

DRILLS

ATTACHMENTS

MISCELLANEOUS

WHEEL LOADERS

HYDRAULIC EXCAVATORS

CRAWLER TRACTORS

COMPACTORS

LANDSCAPING

CRANES

SPECIALS

BACKHOES

AIR COMPRESSORS


Volvo Construction Equipment

USED EQUIPMENT

Asphalt / Pavers / ConcreteEquipment(2) 2007 VOLVO PF6110, 2451-3061 Hrs ......$160,000 Ea.2007 VOLVO PF6170, 1451 Hrs ......................$230,0002008 VOLVO PF6110, 2431 Hrs ......................$185,000

Compactors-Smooth Drum2010 VOLVO DD112HF, 1636 Hrs......................$85,0002008 VOLVO DD118HF, 1874 Hrs......................$90,0002007 VOLVO SD116DXTF, 4921 Hrs ..................$65,000

Excavators-Crawler2011 VOLVO EC480DL, 3144 Hrs ....................$340,0002012 VOLVO EC480DL, 2942 Hrs ....................$360,0002012 VOLVO EC380DL, 1960 Hrs ....................$265,0002011 VOLVO EC210CL, 1931 Hrs ....................$145,0002011 VOLVO EC240C LC, 2301 Hrs ..................$160,0002011 VOLVO EC380D, 1806 Hrs......................$265,0002012 VOLVO EC340DL, 2342 Hrs ....................$260,0001997 CATERPILLAR 325B, 33212 Hrs ................$26,0002011 VOLVO EC460C LC, 3198 Hrs ..................$280,0002008 VOLVO EC210C LC, 2369 Hrs ..................$115,0002005 VOLVO EC290B LC, 7836 Hrs ..................$65,000(2) 2011 VOLVO EC340DL, 2821-2948 Hrs ....................

..............................................$230,000-$235,000

Excavators-Wheel(2) 2011 VOLVO EW180C, 1679-2528 Hrs ....$155,000 Ea.2002 VOLVO EW170, 7055 Hrs ........................$55,000

Motor Graders(2) 2009 VOLVO G930, 2681-3627 Hrs ........$120,000 Ea.2011 VOLVO G946B, 1886 Hrs ......................$245,0002008 VOLVO G940, 2770 Hrs ........................$155,0002008 VOLVO G930, 3913 Hrs ........................$120,000

Off-Highway Trucks2004 VOLVO A25D, 5389 Hrs ........................$190,0002006 VOLVO A25D, 7270 Hrs ........................$120,0002010 VOLVO A25F, 1727 Hrs ........................$285,000

2011 VOLVO A25F, 2344 Hrs ........................$285,000(2) 2012 VOLVO A25F, 1543-1585 Hrs ........$310,000 Ea.(5) 2006 VOLVO A30D, 3619-10655 Hrs$195,000-$215,0002011 VOLVO A30E, 2823 Hrs ........................$310,000(2) 2008 VOLVO A30E, 6402-7124 Hrs ........$175,000 Ea.(2) 2008 VOLVO A35E, 3849-4826 Hrs $255,000-$265,0002005 VOLVO A40D, 6024 Hrs ........................$155,0002009 VOLVO A40E, 3539 Hrs ........................$330,000(8) 2010 VOLVO A40E, 1514-4539 Hrs $350,000-$400,000(11) 2011 VOLVO A40E, 3090-4032 Hrs$350,000-$385,0002007 VOLVO A40E FS, 5601 Hrs ....................$265,0002009 VOLVO A40F, 2004 Hrs ........................$440,000(12) 2011 VOLVO A40F, 1814-6047 Hrs $345,000-$440,000(8) 2012 VOLVO A40F, 1580-2449 Hrs..$440,000-$480,0002006 CATERPILLAR 740, 10624 Hrs ................$185,000

Sweepers / Broom Equipment2010 BROCE MK I, 487 Hrs ............................$93,750

Wheel Loaders2006 VOLVO L60E, 11591 Hrs ........................$55,0001996 VOLVO L70C, 16602 Hrs ........................$32,0002007 VOLVO L70E, 5532 Hrs ..........................$90,000(3) 2012 VOLVO L70G, 2600-2688 Hrs $148,000-$160,000(2) 2012 VOLVO L90G, 1592-2553 Hrs $165,000-$170,000(3) 2011 VOLVO L110F, 3065-5034 Hrs $145,000-$180,0002010 VOLVO L110F, 5170 Hrs ........................$145,000(3) 2012 VOLVO L110G, 2306-2511 Hrs$225,000-$230,0002006 VOLVO L150E, 31040 Hrs........................$70,0002009 VOLVO L150F, 5508 Hrs ........................$205,000(2) 2010 VOLVO L150F, 8030-11459 Hrs ......................

..............................................$140,000-$160,000(5) 2011 VOLVO L150G, 1488-2969 Hrs$260,000-$280,0002010 VOLVO L180F, 2219 Hrs ........................$265,000(2) 2012 VOLVO L180G, 1982-2335 Hrs$325,000-$335,0002003 VOLVO L220E, 15635 Hrs........................$90,0002011 VOLVO L350F, 1820 Hrs ........................$685,0002009 CASE 921E, 7450 Hrs ..........................$130,0002006 CATERPILLAR 930G, 7015 Hrs..................$75,000(2) 2001 CATERPILLAR 950G, 10695-11050 Hrs ....................................................................$80,000 Ea.

2008 CATERPILLAR 962H, 3843 Hrs ................$165,0001998 CATERPILLAR 980G II, 21984 Hrs..............$62,500

North Dakota: Bismarck

FargoMinot

North Carolina: CharlotteRaleigh

AshevilleGreenville

South Carolina: Columbia

North CharlestonPiedmont

Georgia: Buford

Forest ParkSavannah

Tennessee: Knoxville

Chattanooga

Your VOLVO dealer inThe Carolinas • Georgia • East Tennessee • North Dakota

www.ascvolvo.com

(5) 2010 Volvo A40E, 1514-2709 hrs,$390,000 - $395,000

(2) 2007 Volvo T450D, 1530-1632 hrs,$225,000 Ea.

2011 Volvo EW180C, 1677 hrs, $155,000

2012 Volvo L90G, 2549 hrs, $170,000

2011 Volvo L150G, 1937 hrs, $280,000

(2) 2012 Volvo A40F, 1580-1730 hrs,$440,000-$460,000

2011 Volvo EC380D, 1806 hrs, $265,000

(2) 2009 Volvo G930, 2663-3623 hrs,$120,000 Ea.

(3) 2011 Volvo L110F, 3055-5034 hrs,$145,000-$180,000

Doug Wilson 704-562-2032

Email: [email protected]

Billy Brice 678-318-9500


Elon Holley 334-450-7667


ASC has the largest supply of Tier 3 Articulated Trucks in inventory, call for more details.

2006 Volvo EC160B LC, 1900 Hrs, $80,000


YOU UNITE & CONQUER WITH INNOVATION.PEOPLE, POWER, PRODUCTIVITY.

Smart Works.

CORPORATE: 704-494-8100

Bismarck701-250-4882

Fargo701-250-4882

Minot701-250-4882

Buford678-318-9500

Forest Park770-319-0074

Savannah912-964-8079

Asheville828-687-0620

Charlotte704-596-8283

Greenville252-754-5280

Raleigh919-661-8710

Charleston843-414-1120

Columbia803-791-0740

Piedmont864-704-1060

Chattanooga423-308-7940

Knoxville865-525-1845

NORTH DAKOTA GEORGIA NORTH CAROLINA SOUTH CAROLINA TENNESSEE

ascvolvo.com

Volvo Construction Equipment


IAAP Hosts Competitive Golf Outing, Donates Proceeds

Hamilton White (L), Turnkey ProcessingSolutions, and Mark Rademaker ofAmerican Bin & Conveyor took secondplace, at Panther Creek, with 59. Teammembers not pictured: Jimmy Johnson,American Bin & Conveyor; and J.D.Schwarz, Chicago Chain & Transmission.

First place honors went to the Roland Machinery team of (L-R) Mike Brunson, Mike McNamara, James Jesuit and MattRoland with a score of 57.

Third place, at Panther Creek, with a score of 61 went to theHanson Material Service team of (L-R) Matt Morrison, BrianGormsen, Jerry Hepburn and Gerry Nagel.

(L-R): Rich Lucas, Galena Road Gravel; Dick Horton and Kevin Moore, PolydeckScreen Corporation; and Dan Fike, C.T. Fike Company, took the third place trophy .

Second place, at Piper Glen, with a score of 66,went (L-R) to Mike Falter, IDNR; Jim Papenhausen,RiverStone Group; Jim Hafliger, IDNR; and not pic-tured Barry McCauley, IDNR. A sunny day greeted 172 golfers to IAAP’s Aug. 26 outing.

(L-R): Accepting the first place trophy, with a score of 61 was Tim Gonigam and RonEarl, Astec Mobile Screens; Troy Kutz, William Charles Construction; and JeffLovgren, KPI-JCI-AMS.

Asunny day with more than enough heat welcomed172 golfers at IAAP’s Aug. 26 Golf Outing heldat Panther Creek Country Club and Piper Glen

Golf Club in Springfield, Ill. Due to the strong support,this outing raised $5,160 for the IAAP Political ActionCommittee and $5,210 for the IAAP’s Rocks, Minerals& Mining workshop for teachers which included BobHubbard’s, Hanson Material Service, $50 contributionfrom his award for sinking the longest putt at Piper Glen.

The golf outing offers a unique opportunity to havefun and visit with friends in the aggregates industry.Using a scramble format, the event proved to be highlycompetitive once again. In addition to golf, a deliciousmeal at the end of the day offered an opportunity to rec-ognize the best scores and outstanding players at bothcourses, award trophies and hand out numerous raffleand door prizes. Everyone agreed it was hot but a fineday to be playing golf.

(This story also can be found on ConstructionEquipment Guide’s Web site at www.constructionequip-

mentguide.com.)


JD 400D, 1183 hours,Warranty, #U11426..............................$389,000

JD 600CLC w/ GenesisGXP1200R Shear,#U10798 ........$468,000

NPK Hammers, AllSizes for All Makes.Inspected and WellMaintained, GH4-GH18

JD 210CW, 2 PieceBoom, Aux Hyd,#U11722 ........$148,000

JD 9530, Auto Load,1045 hours, Warranty,#U11750 ........$269,000

JD 444K, 2.5 yd Bkt, 85 hours, Warranty,#U11423 ........$143,000

JD 350DLC, 13' 1" Arm,32" Pads, #U11915 ............................$209,000

JD 824K, 6 yd Bkt,#N5289 ..........$285,000

JD 350GLC MaterialHandler, #N5539 ................................$525,000

JD 200DLC, 9' 6" Arm,32" Pads, Mech Thumb,#U11358 ........$149,000

JD 850K, 24" Pads,128" Blade, 1494 hours,#U11857 ........$268,000

JD 844K, Cab, Air, 7.25yd Bkt, #U11744..................................$398,000

JD 400D, New KLEIN8000 gallon water truck,6391 hrs, #U11425..............................$258,000

JD 672D, Low Cab, Air,14' Blade, #U11856 ............................$198,000

JD 844J, Cab, Air, 7.25 yd, 2170 hours,#U11039 ........$259,000


3478 5th Ave. S. • Fort Dodge, IA 50501 • (515) 574-2302

4734 Sergeant Rd. • Waterloo, IA 50701 • (319) 234-8710

106 8th St. • Sergeant Bluff, IA 51054 • (712) 943-4470

Mid Country Machinery(800) 206-5936

www.midcountrymachinery.com

2013 Kobelco ED160, EROPS, Blade, New..................$170,000

2012 Kobelco SK350, EROPS, Std Arm, 3 units ........$240,000

2012 Kobelco SK210, EROPS, Aux Hyd, 5 units ........$168,500

2012 Kobelco ED150, EROPS, Aux Hyd, New ............$155,000

2012 Kobelco SK140, EROPS, Heat, Aux Hyd ............$126,500

2012 Kobelco SK170, EROPS, Heat, A/C ....................$145,000

2012 Sany SY215, EROPS, Aux Hyd, 32 Hrs ..............$122,500

2012 Sany SY135C, EROPS, Pattern Changer ..............$89,500

2011 Kobelco SK295, EROPS, Std Arm, 732 Hrs........$179,000

2008 Kobelco SK350, EROPS, Thumb, Heat, 4330 Hrs..............

....................................................................................$123,500

2008 Kobelco SK260, EROPS, A/C, Heat, 2542 Hrs....$108,500

2008 Kobelco SK260LR, EROPS, Long Reach ............$119,000

2007 Kobelco SK350, EROPS, A/C, Heat, 3656 Hrs....$129,500

2007 Kobelco SK210, EROPS, Heat, A/C, 3294 Hrs......$87,500

2007 Kobelco SK135, EROPS, A/C, Heat, 2394 Hrs......$63,500

2006 Kobelco SK330, EROPS, Long Reach, 3925 Hrs$139,500

2006 Kobelco SK160, EROPS, Aux Hyd, Thumb ..........$73,000

2006 Komatsu PC200, EROPS, A/C, Heat, 3745 Hrs ....$96,500

2004 Kobelco SK210, EROPS, A/C, Heat ......................$65,000

2003 Kobelco SK160, EROPS, Thumb, 5306 Hrs..........$56,500

2001 Kobelco SK210, EROPS, Heat, 5460 Hrs..............$55,000

1998 Komatsu PC220, EROPS, Long Reach, 5957 Hrs $55,000

2012 Deere 310SK, EROPS, 4WD, Heat, A/C 8units ........$CALL

2010 Cat 450E, EROPS, 4WD, Aux Hyd, 206 Hrs..........$89,000

2008 Cat 420E, EROPS, 4WD, X-Hoe, 359 Hrs ............$70,000

2008 JCB 4CX, EROPS, 4WD, X-Hoe, 953 Hrs..............$81,000

2008 JCB 3CX, EROPS, 4WD, Aux Hyd, 362 Hrs ..........$63,000

2006 Cat 420E, EROPS, 4WD, X-Hoe, 3163 Hrs ..........$57,500

2005 Deere 310G, EROPS, Heat, A/C, 1978 Hrs ..........$35,000

1996 Cat 416B, EROPS, 4WD, Std Hoe, Heat................$19,000

1996 Cat 416B, EROPS, 4WD, Std Hoe, 6617 Hrs ........$19,000

1990 Ford 655C, EROPS, X-Hoe, Aux Hyd, 5922 Hrs ..$15,000

1989 Deere 410C, EROPS, Std Hoe, Heat ....................$22,000

1987 New Holland 555B, EROPS, Std Hoe, 8028 Hrs ..$15,000

1982 Deere 310AD, EROPS, Std Hoe, 3922 Hrs ............$9,500

2012 Kawasaki 95Z-7, EROPS, A/C,Ride Control........$395,000

2012 Kawasaki 65ZV-2, EROPS, QC, Ride Control ....$155,500

2012 Kawasaki 45ZV-2, EROPS, A/C, QC, 4WD............$71,500

2012 Kawasaki 70TMC-2, EROPS,A/C, Heat ..............$162,500

2012 Kawasaki 90Z-7, EROPS, QC, A/C, Heat ............$295,000

2011 Case 621E, EROPS, QC, A/C, Heat, 18 Hrs ........$139,500

2010 Kawasaki 80ZV-2, Ride Control, 601 Hrs, A/C ..$155,000

2008 Deere 624J, EROPS, QC, 3rd Valve, 5516 Hrs ..$145,000

2007 NH W190B, EROPS, Ride Control, 2667 Hrs ......$109,500

2006 Kawasaki 95ZV, EROPS, A/C, Heat, 5613 Hrs ....$169,500

2003 Komatsu WA180-MC3, EROPS, A/C, Heat............$58,500

1999 Cat 950G, EROPS, Heat, A/C ................................$75,000

1998 Deere 644H, EROPS, Heat, A/C ............................$70,000

1986 Cat IT18, EROPS, QC, A/C, Heat, 9322 Hrs ..........$25,000

1983 Case W20B, EROPS, 4in1 Bucket, 7662 Hrs ........$16,000

2012 Kobelco SK55SR, EROPS, 4 way blade, 4 units ..$64,000

2012 Kobelco SK55SR, OROPS, 4 way blade ..................$CALL

2012 Kobelco SK35SR-5, EROPS, Heat, Aux Hyd............$CALL

2012 Kobelco SK80CS-2, EROPS, Aux Hyd, 310 Hrs....$85,500

2012 Sany SY75, EROPS, Aux Hyd, 2 units ..................$67,500

2009 Kobelco SK35SR-5, EROPS, Aux Hyd, 926 Hrs ..$29,000

2008 Kobelco SK80CS-1, EROPS, Blade, 829 Hrs ........$53,000

2012 Deere 700K LGP, EROPS, A/C, Heat, Topcon ....$179,000

2011 Deere 650J XLT, OROPS, Sweeps, 6 way ............$75,000

2008 Cat D6T LGP, EROPS, A/C, Straight Blade ..........$199,500

2008 Cat D6T XL, EROPS, A/C, SU Blade....................$210,000

2008 Cat D6T XL, EROPS, Sweeps, SU Blade ............$199,000

2008 Cat D6T XW, EROPS, A/C, Heat, SU Blade..........$242,500

2008 Cat D6N LGP, EROPS, A/C, 6way, 3620 Hrs ......$149,000

2008 Cat D6N LGP, EROPS, A/C, Heat, 3109 Hrs ........$149,000

2008 Cat D6T XL, EROPS, A/C, Heat, 4367 Hrs ..........$210,000

2007 Cat D6T XW, EROPS, SU Blade, 3985 Hrs..........$199,000

2007 Cat D6T XL, EROPS, A/C, Heat, 4279Z Hrs ........$189,000

2007 Cat D6K LGP, EROPS, Heat, A/C, Sweeps ..........$124,500

2006 Komatsu D61EX-15, EROPS, 6way, 4931 Hrs ....$105,000

2006 Cat D6N LGP, EROPS, A/C, Heat, 3644 Hrs ........$112,000

2004 Cat D6R XW, EROPS, A/C, Heat, 3829 Hrs ........$170,000

2003 Cat D6R XW, EROPS, 6way, Weighted Hitch ........$98,000

2001 Cat D6R XL, EROPS, SU Blade, Long Track ............$CALL

1987 Cat D6H, OROPS, SU Blade, 24” Shoes ..............$49,000

1998 Cat D6M XL, EROPS, A/C, Heat ............................$63,000

1975 Cat D7G, Open Sweeps, New Undercarriage ........$55,000

1974 Dresser TD15C, OROPS, SU Blade ......................$16,500

2007 Dynapac CA150PD, Single Drum, 129 Hrs ..........$55,000

2006 Bomag BW177PDH, 66” Padfoot, 325 Hrs ..........$44,000

2006 Bomag BW177PDH-3, 66” Padfoot, 100 Hrs ......$46,500


2005 I-R SD100D-TF, OROPS, Single Drum, 659 Hrs ..$57,000


2005 I-R SD70D, OROPS, 66” Smooth drum, 1300 Hrs$43,000

2004 I-R SD70D, OROPS, 66” Smooth drum, 2396 Hrs$35,000

2004 HyPac C832C, OROPS, 68” Padfoot, 1207 Hrs ....$33,500

1989 Dynapac CA15PDB, OROPS, Blade, 4144 Hrs......$18,500

EXCAVATORS

LOADER / BACKHOES

WHEEL LOADERS

MINI EXCAVATORS

CRAWLER TRACTORS

COMPACTORS


(262) 781-3770

SEE PHOTOS OF OUR COMPLETE INVENTORY AT WWW.ARINGEQUIPMENT.COM13001 W. Silver Spring Drive

Butler, WI 53007

Jim KingMobile: (414) 530-0592

Fax: (262) 781-5053Email: [email protected]

WE ALSO HAVE AGGREGATE EQUIPMENT. PLEASE CALL DENNY KREUSER (608) 386-8480 FOR MORE INFO.

2005 Volvo L220E, Cab, A/C, Radio, AdditionalWork Lights, Return to Dig, Boom Suspension,Engine Block Heater, 7cy Bucket w/BOE,29.5R25 Tires, Recent Transmission..$95,000

2012 Volvo L90G, Heated Operator’s Seat w/LeftHand Armrest, Rear Camera w/Color LCD Monitor,Sliding Window Operator’s Door, Boom Suspension,Reversible Cooling Fan, Rear Frame Cover Plates,Front Frame Footsteps, Full Rear Fenders, CareTrackSatellite System w/3yr Subscription, 104” 3.5cyBucket w/BOE, 20.5R25 Bridgestone VJT L-3 Tires,Volvo D6H (Tier 4i) Engine................................$CALL

1984 Bucyrus-Erie 88B - totally rebuiltBucyrus 88B, new cab, new tin work, rebuiltcummins engine, completely rewired $399,000

2012 Volvo EC340DL, MUNICIPAL TRADE, lowhours, 21'2" boom, 12'10" arm, 36" pads, rear viewcamera, UQF, pilot pattern controls, fixed lower frame,air suspension seat w/heat, 3 switch joystick, radiow/cd & mp3, rotating beacon, Caretrack w/3 year sub-scription, 2 pump double act. piping, roll switch,straight travel pedal ........................................$CALL

2000 Volvo L330D, Cab, A/C, Contronics, AirSuspension Seat, Work Lights, Boom Suspension,8.6cy Spade Nose Bucket w/BOE, 35/65-33 Tires,New Engine 16000hrs, Rebuilt Transmission 15000hrs..........................................................................$Call

2004 Volvo A40D - AC, CONTRONICS,29.5-25 TIRES, TAILGATE ......$140,000

2008 Volvo DD24 - Dual 47” Drums w/UrethaneWipers, ROPS, Sliding Seat w/Dual Lever Control,Hydrostatic Drive, Work Lights, Rotating Beacon,Offset Articulation Joint, 68 Gallon Pressurized WaterSystem w/4 Nozzles Per Drum, Loading/UnloadingTraction Control, (NEW) 3 Cylinder Cummins Engine(32HP), Operating Weight 5,725 lbs ..............$17,500

2005 Volvo A35D, A/C, Radio, Air Seat, Work Lights,Electric Hood Opener, Tailgate, 26.5R25 Tires,“Service Records” ........................................$100,000

1998 Volvo L150C - Cab, A/C, Radio,Contronics, Work Lights, Boom Suspension, 5cyBucket w/BOE, 26.5R25 Michelin Tires 50%................................................................................$55,000

2008 Volvo L70F - Cab, A/C, Radio w/CD,Front Work Lights, Boom Suspension, 3rd Function,Hydraulic Attachment Bracket, Reversible CoolingFan, Front Frame Footsteps, Right Hand Side Stepsw/Lockable Toolbox, Engine Block Heater, DymaxHydraulic Q/C, Dymax 4cy High Tip Bucket w/BOE,20.5R25 Goodyear RL-2+ Tires 50% ........$99,500

2010 Volvo L60F, 20.5R25 L3 RT3B GYR, BoomSuspension, Radio/CD, Oil Sampling Ports, HydraulicAttach Bracket, RH Radio Mtg Kit, Work Lights Front &Rear on Cab, RH Foot Step, ACC, Care Track, SeatISRI Air Susp., LH Armrest, 98” 2.2 CUYD H/O STEGP Bkt w/BOE 93817 ..................................$127,000

2012 Volvo BL70B, Municipal Trade, 92.5”Loader Bkt, Mech. Att. Bracket, 1.3 CY GP Bkt w/SpillGuard, EXT Dipper Arm, Pilot Controls, 4WD, A/C,Radio w/CD, MP3 Connection, Double Battery, BoomSuspension, Additional 1080lb Counterweight$95,000

2012 Volvo L70G, Cab, A/C, Radio w/CD, Heated AirSuspension Operator's Seat w/Left Hand Armrest, RearCamera w/Color LCD Monitor, Sliding Window Operator's Door,Work Lights, Boom Suspension, 3rd/4th Hydraulic Functions,Hydraulic Attachment Bracket, Reversible Cooling Fan, EngineBlock Heater, Reverse Alarm, Rear Frame Cover Plates, FrontFrame Footsteps, Logging Counterweight, CareTrack SatelliteSystem w/3yr Subscription, 100" 3.1cy Bucket w/BOE, 20.5R25Michelin XHA2 L-3 Tires, Volvo D6H (Tier 4i) Engine....$CALL

2001 Volvo L70D, Cab, A/C, Radio, WorkLights, Boom Susp, 3rd Function, RotatingBeacon, Hydraulic Attachment Bracket, 2.5cyBucket w/BOE, 20.5R25 Tires ............$63,500

2011 Volvo DD70HF, Backup Alarm, OperatingWeight 14,895 Lbs, 205 Gallon Water Tank Capacity,Vibration Frequency: 4000 VPM, VibrationCentrifugal Force: 7,820-21,080 Lbs, 57” Drum Width....................................................................$121,000

2005 Volvo L70E - Cab, A/C, Contronics, HydAttachment Bracket, 20.5R25 Tires, 2.5 CY Bucketw/BOE......................................................$110,000


Murphy Tractor & Equipment Hosts Annual Golf ScrambleMurphy Tractor & Equipment Co. Inc., in Park City, Kan., host-

ed its annual golf scramble on Aug. 16. This year, it was held inNewton, Kan., at the Sand Creek Station Golf Course. Despiteweather conditions, a large number of golfers made their way toNewton in high spirits, making it anther successful event. Amongmany contests for attendees to participate in was a Hole-In-One,with an opportunity to score a John Deere 35D compact excava-tor. “I want to thank everyone who made this year’s event possible,

especially to our sponsors, volunteers and employees at the golfcourse, who were more than accommodating to Murphy Tractorand our guests,” said Eric Timken, compact equipment sales man-ager of Murphy Tractor & Equipment Co., Inc. “Attendees were excited to participate on one of the Golf

Digest’s top public courses in the area. Everyone enjoyed thegood food and fellowship with one another. We look forward tocontinuing great relationships with each of our customers ” The top three teams, as well as participants who made the

longest putt and longest drive, were awarded prizes donated fromMurphy Tractor & Equipment Co. and sponsors of the tourna-ment. Door prizes were awarded to those lucky individuals whosenames were drawn during lunch. This year, two new contestswere added, including a chipping contest and closest to the pin. Murphy Tractor and Equipment Co. Inc., one of John Deere’s

largest North American construction equipment dealer organiza-tions, is headquartered in Park City, Kan. The organization has 28locations throughout the states of Iowa, Kansas, Missouri, Ohio,Pennsylvania and Nebraska. For more information, visit www.murphytractor.com.(This story also can be found on Construction Equipment

Guide’s Web site at www.constructionequipmentguide.com.)

CEG

(L-R): Ryan Strength, Tim McBride, Jim Smith andBruce Lyon, all of Affordable Mini-Storage LLC, wonfirst place.

Prize WinnersLongest drive and closest to the pin winner• Brent Sneath: King Enterprise GroupLongest putt winner• Rick Zwak: Towanda TownshipChipping contest winner• Ryan Strength — Affordable Mini-Storage LLC First Place Team — Awarded Sand Creek Station Pro-

Shop gift certificates• Bruce Lyon: Affordable Mini-Storage LLC• Jim Smith: Affordable Mini-Storage LLC• Tim McBride: Affordable Mini-Storage LLC• Ryan Strength: Affordable Mini-Storage LLCSecond Place Team — Awarded Sand Creek Station

Pro-Shop gift certificates• Jason Reardon: Murphy Tractor & Equipment Co. Inc. • Jeff Bremer: Cornejo & Sons Construction• Shawn Stuckey: Jajo Inc.• Guy Cunningham: Cunningham & AssociatesThird Place Team — Awarded Sand Creek Station Pro-

Shop gift certificates• Noe Ortiz: Becker Tire• Randy Shumway: Becker Tire• Mike Unruh: Becker Tire• Joe Hitt: Becker Tire

(L-R): Jason Reardon of Murphy Tractor &Equipment Co. Inc.; Jeff Bremer of Cornejo & SonsConstruction; Shawn Stuckey of Jajo Inc.; and GuyCunningham of Cunningham & Associates, won sec-ond place.

(L-R): Noe Ortiz, Randy Shumway, Mike Unruh andJoe Hitt, all of Becker Tire, won third place.

(L-R): Briana, Brandon, Steve and Judy Carmichael,all of Carmichael Construction, participate in thegolf scramble.

J Pinkerton, parts manager ofMurphy Tractor & Equipment Co.Inc., swings for the longest drivecontest.

Jeff Cornejo (L), Cornejo & SonsConstruction, and JasonReardon, territory sales managerof Murphy Tractor & EquipmentCo. Inc., get a ride in a golf cart.

Ray Bryant of CarmichaelConstruction focuses on his put-ting skills.

Larry Parker of Gore Townshipmakes an attempt to win the JohnDeere 35D excavator at the Hole-In-One contest.

Richard Jefferson of ISGTechnology takes a shot at theHole-In-One contest.


LOVE AT SECOND SIGHT


Bobcat Reveals Asphalt Preservation Tool at Demo Event

Meeker County, Minn., Highway Superintendent Carlen Hansen (L) takes alook with Farm-Rite Sales Specialist Jay Kockler.

The asphalt preservation toolattachment in action.

This simple restoration system uses aninfrared asphalt heater and asphaltprocessor to repair potholes and othersurface defects like cracks, deteriorat-ing surfaces and frost heaves that devel-op in streets, highways and parking lots.

Ronald Mortensen (L), Meeker CountyHighway engineer of Meeker County, Minn.,with owner Tim Cox of Farm-RiteEquipment, Dassel, Minn., likes how easythe asphalt preservation tool works.

Eric Grube (L), Bobcat district service manager, looks over the new AH30 Bobcat asphaltpreservation tool with Dale Brandt, Bobcat district attachment and aftermarket manager.

Farm-Rite Equipment of Dassel, Minn., hosted thedemo event at the Hutchinson Mall Parking lot,Hutchinson Minn.

Tim Krahn, Bobcat district salesmanager, cooks up a feast for allthe attendees.

Eric Grube, Bobcat district service man-ager, smooths out reclaimed asphaltwith a Doosan vibratory roller.

Farm-Rite Equipment of Dassel,Minn., hosted the Bobcat prod-uct demo event at the

Hutchinson Mall Parking lot,Hutchinson, Minn., on August 21.

The demo event highlighted thenew Bobcat attachment, the AsphaltPreservation tool. Bobcat asphaltpreservation tools answer the grow-ing need for an eco-friendly restora-tion process that decreases expensesand extends the life of road andparking lot repairs, according to thecompany. This simple restorationsystem uses an infrared asphaltheater and asphalt processor torepair potholes and other surfacedefects like cracks, deteriorating sur-faces and frost heaves that developin streets, highways and parking lots.

(This story also can be found on

Construction Equipment Guide’s Web

site at www.constructionequipment-

guide.com.)


RDO Equipment Co.Burnsville, MN

Matt Dull952-890-8880

[email protected]


SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL

• No tools required• No expensive

hardware needed• No more rags

stuffed into hoses• No more messy

plastic caps• The ultimate

contamination control tool• One hand installation• Eliminate hydraulic

oil spills & clean up• Quick installation

& ease of usage• Safe for personnel

& environment• Industry acclaimed• 100% Made in USA

For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com



JCB Celebrates Facility Grand Opening

Randy Thompson, mechanic of thecity of Chesterfield for 24 years,and his granddaughter Isabelle testout the iron.

David Ilges of Amcon Municipal Concrete in O'Fallon, Mo., in front of the JCBJS160 excavator.

Ted Vehige of Castle Contracting in St. Louischecks out the JCB telescopic handler.

Mark Sievers (L) and Karen Guinn of JCB announce thedoor prize winners. Several $50 Lowe’s gift cards wereawarded and JCB St. Louis also gave away a shotgun.

Farrin Barber operates a JCB Dancing Digger.

(L-R): Mark Sievers, Brian Sievers, Tim Sieversand Jim Sievers enjoy the weather out in the lot.

(L-R): Jim Sievers, Tim Sievers, Julie Smith (Mayor Pagano’sassistant), Len Pagano (Mayor of St. Peters), Mark Sievers,Nick Meister of JCB, Brian Sievers and Dan Schmidt of JCB posefor a picture. Mark Sievers is holding a plaque from JCBWorldwide Chairman and CEO John Patterson.

Ron Baese (R) of JCB of St. Louis is showingthe JCB 260T track loader to Frank Toscani(in cab) and Dave Gablino, both ofHardscape Construction in O’Fallon, Mo.

JCB of St. Louis, a division of SieversEquipment Co., welcomed customers to thegrand opening of its St. Peters, Mo., location

on Sept. 6. Approximately 200 people attended the grand

opening, which was catered by HootersRestaurant The JCB Events truck was on hand aswell. Customers were treated to a backhoe rodeocontest, a skid steer ride-and-drive, and the famousJCB Dancing Digger display. Several prizes wereawarded as well, including gift cards, t-shirts, hatsand the grand prize of a Benelli 12 GA shotgun.There was a large equipment display on hand,

including skid steers, compact track loaders, tele-handlers, backhoes, excavators, mini excavatorsand more. Peaking most attendee’s interest werethe JCB skid steer and compact track loaders withthe industry’s only single powerboom with side-door entry.

(This story also can be found on ConstructionEquipment Guide’s Web site at www.construc-

tionequipmentguide.com.)


Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50

Scale ....................................................................................$80

Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale $80

Allis-Chalmers Yellow HD21 Dozer/Ripper, 1:50 Scale ..$80

Bantam Truck Mounted Crane, 1:50 Scale ..................$115

Bantam Truck Mounted Shovel, 1:50 Scale ....................$60

Bobcat A300 Skid Steer Loader, Scale 1:25..................$40

Bobcat E35 Compact Excavator, 1:25 Scale ................$50

Bobcat E55 Compact Excavator, 1:25 Scale ................$60

Bobcat 5600 Toolcat Utility Vehicle, 1:25 Scale............$55

Bobcat M200 Gold Skid Steer Loader, Scale 1:25 ......$30

Bobcat M400 Gold Skid Steer Loader, Scale 1:25 ......$25

Bobcat S185 Skid Steer Loader, 1:25 Scale..................$50






Bobcat T550 Compact Track Loader, 1:25 Scale ..........$65



Bobcat Versahandler Tool Carrier, 1:25 Scale ..............$50

Bucyrus Erie 22B Cable Shovel, 1:50 Scale ..............$225

Bucyrus Erie 22B Cable Backhoe, 1:50 Scale ............$225

Case 330 Articulated Dump Truck, 1:50 Scale..............$35

Case 420 Series 3 Uniloader, 1:50 Scale ......................$85

Case 695 Super “R” Backhoe/Loader, 1:50 Scale ......$165

Case CX130 Excavator w/Breaker, 1:50 scale ............$135

Caterpillar AP655D Asphalt Paver, W/O Canopy, 1:50

Scale ................................................................................$80

Caterpillar D5K2 LGP Track-Type Tractor, 1:50 Scale ..$65

Caterpillar D6K Track-Type Tractor ..............................$60

Caterpillar D7E Track-Type Tractor, 1:50 Scale ............$90

Caterpillar D8T Track-Type Tractor, 1:50 Scale ..........$110

Caterpillar D10T Track-Type Tractor, 1:50 Scale ........$105

Caterpillar D11R Track-Type Tractor, 1:50 Scale ........$100

Caterpillar 140M Motor Grader, 1:50 Scale....................$85

Caterpillar M200 Cold Planer, 1:50 Scale ....................$110

Caterpillar 226B3 Skid Steer Loader, 1:32 Scale ..........$40

Caterpillar 247B3 Multi-Terrain Track Loader, 1:32 Scale ..

..........................................................................................$40

Caterpillar 336D L Excavator, 1:50 Scale ......................$95

Caterpillar 365B L Series II Excavator, 1:50 Scale........$75

Caterpillar 416C Backhoe/Loader, 1:50 Scale ..............$75

Caterpillar 374D L Excavator, 1:50 Scale ....................$150

Caterpillar 963D Track Loader, 1:50 Scale ....................$60

Caterpillar 977 Traxcavator, 1:50 Scale ........................$60

Doosan Moxy MT31 Articulated Truck ........................$100

Gehl 680 Compact Wheel Loader, 1:50 Scale ..............$45

Hamm 110 Asphalt Compactor w/ROPS, 1:50 Scale ....$70

Hamm 3307 Compact Roller, 1:34 Scale........................$45

Hamm GRW 280 Compactor w/Cabin, 1:50 Scale ........$85

Hitachi EH700 Off-Highway Truck, 1:50 Scale ..............$40

International 175 Crawler Loader, 4in1, 1:50 Scale ......$65

International TD-15 Dozer, 1:50 Scale............................$60

International TD-20E Dozer, 1:64 Scale ........................$24

International TD-25 Dozer, 1:50 Scale............................$75

JCB 3CX Backhoe/Loader, 1:50 Scale ..........................$85

John Deere 315 SJ Backhoe/Loader, 1:50 Scale ..........$45

John Deere 400D Articulated Truck, 1:50 Scale ..........$45

Komatsu CK25 Compact Track Loader, 1:50 Scale......$45

Komatsu D51 PX Dozer, 1:50 Scale ..............................$85

Komatsu D51 EX Dozer, 1:50 Scale ..............................$85

Komatsu D65PX-17 Dozer, 1:50 Scale ..........................$80

Komatsu D155 AX Dozer, 1:50 Scale ............................$85

Komatsu D375 A Dozer, 1:50 Scale..............................$125

Komatsu GD655 Motor Grader, 1:50 Scale....................$90

Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$80

Komatsu HM250 Articulated Dump Truck, 1:50 Scale $75

Komatsu PC14R Mini-Excavator, 1:32 Scale ................$45

Komatsu PC200-8 Excavator, 1:50 Scale ....................$110

Komatsu PC400 LC Excavator, 1:50 Scale....................$95

Komatsu SK1020 Skid Steer Loader, 1:25 Scale ..........$40

Komatsu SK1026 Skid Steer Loader, 1:25 Scale ..........$40

Komatsu WA500 Wheel Loader, 1:50 Scale ..................$80

Komatsu WA600 Wheel Loader, 1:50 Scale ..................$80

Komatsu WB146 Backhoe/Loader, 1:50 Scale..............$75

Komatsu Mack Granite MP w/Lowboy Trailer, 1:50 Scale ..

..........................................................................................$90

Link-Belt 80100 RTC, 1:50 Scale ..................................$185

Link-Belt 250 X Excavator, 1:50 Scale ........................$140

Poclain 350 Front Shovel, 1:50 Scale ..........................$190

Terex AC100/4 All Terrain Crane, 1:50 Scale ..............$200

Terex TR60 Off-Highway Truck, 1:50 Scale ................$160

Vogele MT3000 Powerfeeder, 1:50 Scale ....................$140

Vogele 1900 Tracked Paver, 1:50 Scale ......................$125

Vogele Super 700 Small Paver, 1:50 Scale....................$75

Vogele Super 1803-2 Wheeled Paver, 1:50 Scale ......$135

Vogele Super 3000-2 Tracked Paver, 1:50 Scale ........$140

Vogele Vision 5200-2 Tracked Paver, 1:50 Scale ........$115

Volvo EC280 Excavator, 1:50 Scale ..............................$50

Volvo L220G Wheel Loader, 1:50 Scale ......................$120

Volvo L250G Wheel Loader, 1:50 Scale ......................$120

Volvo SD-122 Soil Compactor, 1:72 Scale ....................$25

Wirtgen W210 Cold Milling Machine, 1:50 Scale ..........$80

CALL Toll Free

800-523-2200Ext. 197

Collections Wanted, I Buy Collections Shipping and Handling Included

Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell

Email – [email protected]

CEG Scale Models470 Maryland Drive

Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Allis-Chalmers HD21 Dozer w/ripper, 1:50 Scale $80Komatsu HM400-3 Articulated Truck, 1:50 Scale $100Caterpillar M200 Cold Planner, 1:50 Scale $110



2001 Komatsu PC228USLC-3: #80703, Cab/AC,31.5” Tracks, 9’7” Arm, 5100 Hrs ........$89,500

2008 Komatsu PC270LC-8: #91822, Cab/AC,31.5” Tracks, 11’6” Arm, JRB QC, KOMTRAX,9800 Hrs ..............................................$99,500

1995 Komatsu PC250LC-6: #91777, Aux Hyd,31.5” Tracks, 10,000 Hrs ......................$49,500

1987 Komatsu PC200LC-3: #91840, Cab, GPBkt, 9400 Hrs ........................................$29,500

2011 Komatsu PC200LC-8: #81903, Cab/AC,9’7” Arm, KOMTRAX, Rear Camera, Only 200Hrs ......................................................$169,500

2007 Komatsu PC78MR-6: #81694, Cab/AC,Rubber Tracks, Blade, Aux Hyd, QC, 3700 Hrs ................................................................$54,500

2007 Komatsu PC138USLC-8: #81618, Cab/AC,8’ Arm, 24” Tracks, Blade, 4400 Hrs ....$83,500

2006 Komatsu PC300LC-7EO: #81832, Cab/AC,10’ Arm, 33.5” Tracks, KOMTRAX, 7150 Hrs..................................................................$119,500

2004 Komatsu PC160LC-7: #81899, Cab/AC,Aux Hyd, 5100 Hrs................................$84,500

2001 Komatsu PC200LC-6LF: #80381, Cab/AC, 60’Long Front, 60” Ditching Bkt, 5350 Hrs $139,500

2005 Komatsu PC270LC-7: #81943, Cab/AC,33.5” Tracks, Mech Thumb, 6350 Hrs $104,500

2005 Komatsu PC400LC-7: #91871, Cab/AC,35.5” Tracks, 13’ Arm, JRB QC, Aux Hyd,13,300 Hrs ..........................................$118,500

Call Doug / Sam:(866) 485-7180


NEW

ELKADER, IOWA | 563-245-6871 | www.mobiletracksolutions.com

BLADE CLEANER

HALF CLAMP GUARD

BLADES

8 BOLTS PER DISK BLADE

DUO-CONE™SEAL GUARD

HARDENEDHUB COVER

BUILT EXCLUSIVELY for heavy duty construction

LESS DOWNTIME 16 individually mounted disk blades

MADE IN USA MTS manufactures disk blades out of steel

REDUCED MAINTENANCE CAT® Duo-Cone™ seals and oil bathed bearings

TWO MODELS AVAILABLE:MT-11X32 & MT-13X38

Reflecting the continued slowdownin the size of the total market for con-struction equipment, VolvoConstruction Equipment (Volvo CE)saw a reduction in its second quarter2013 results, with sales down 19 per-cent during the period. Behind theheadline figures there were underlyingpositives, including a good orderintake and improving trends in China,Europe and the Middle East. Anddespite the lower sales, due to cost andinventory control measures, the com-pany’s operating margin more thandoubled compared to the first quarterof 2013.Net sales in the second quarter

decreased by 19 percent. Adjusted forcurrency movements net salesdecreased by 14 percent. Operatingincome also decreased in the sameperiod during 2012. Operating margin,at 8.3 percent, although down com-pared to the 13.9 percent achieved insame period last year (due to lowersales in the higher margin mining sec-tor), more than doubled versus the firstquarter of 2013. Despite the weakermarket conditions, the value of Volvo

CE’s order book at the end of the sec-ond quarter was nearly at the samelevel as the year earlier period.

SDLG Enters North AmericaThe publication of the second quar-

ter and half year results also was usedas an opportunity to announce that thecompany’s SDLG brand would enterthe North American market in 2013,initially launching two models ofwheel loader, the LG958 and LG959.“We’re pleased to announce the

launch of SDLG and its high qualityvalue products into North America,”said Pat Olney, president and CEO ofVolvo Construction Equipment.“We’re confident that there’s demandfor these robust and reliable machinesand that SDLG will enjoy a warmreception. Backed at a higher level bythe strength of Volvo CE and the widerVolvo Group, SDLG is in a good posi-tion to develop long term customerrelationships in this segment of themarket.”

Outlook for the Full YearMeasured in units, for the full year

2013 Europe is anticipated to declineby 5 to 15 percent, while expectationsregarding North America, SouthAmerica, China and the rest of Asia areall expected to be in the range of minus5 percent to plus 5 percent.

Important Events During the Quarter

Volvo CE attended the constructionequipment industry’s largest exhibition— Bauma — in April. New productsat the Munich-based show were theECR25D, ECR58D and the ECR88Dshort radius compact excavators, aswell as the P6870C asphalt paver. InMay the company opened its newexcavator plant in Kaluga, Russia. Thefactory is initially producing four mod-els of excavators. The second quarterof 2013 also saw Volvo CE’s remotetelematics system CareTrack reach asignificant milestone; there are nowmore than 50,000 machines worldwideinstalled with the telematics portal.

(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)

Volvo CE Operating Margin Recoversin Second Quarter; Order Intake Rises

Ironhide Equipment...

Bobcat of Grand Forks, DevilsLake, Williston Re- BrandBobcat of Grand Forks, Bobcat of Devils

Lake and Bobcat of Williston, recentlyannounced the re-branding of their threelocally-owned Bobcat and Doosan equip-ment dealer locations. These locations willnow all operate as a division of IronhideEquipment.An integral part of updating their brand is

the new logo. The new design will be seenacross their materials and identified with thesame exceptional products and services cus-tomers have come to know from this Bobcatequipment dealer, according to Ironhide. Thenew name represents a continued commit-ment to improving business practices, aswell as strengthening business services theyoffer. Their store locations will remain

branded as Bobcat of Grand Forks, Bobcatof Devils Lake and Bobcat of Williston.The three locations will continue to sup-

ply customers across northern North Dakotaand northwest Minnesota with the samequality industrial equipment from brandssuch as Bobcat, Doosan, Gravely, Ariens,Husqvarna, Felling, ABU, Mahindra andPro-Tech. Moving forward, customers will see

Ironhide’s new name and logo throughoutliterature, advertisements, in-store experi-ence and social media.


Construction Equipment Guide’s Web site at

www.constructionequipmentguide.com.)

Visit CEG’s Web Site atwww.ConstructionEquipmentGuide.com


We are relentlessly focusedon helping you build a safer,

better, stronger future, and we have your back

UnitedRentals.com | 800.UR.RENTS

© 2013 United Rentals, Inc.

Aerial | Earthmoving | Trench SafetyPower & HVAC | Tool Solutions | Technology

Doing whateverit takes to help you

get the job done.


PRE-OWNED, JOB READY EQUIPMENT NOW AVAILABLE! Cincinnati • Mt. Orab • Columbus • Lexington • Louisville

Call Brad Kent at 513-266-7761 or on our USED EQUIPMENT HOTLINE: 888.BOBCATS

Parts • Sales • Service • Rental • Training

To See More Machines, Please visit us online at www.bobcat-ent.com

2006 S185 Bobcat Loader, 1110 Hrs, Open ROPS, CN 86985..........................................................................................$22,000

2011 S185 Bobcat Loader, 780 Hrs, Joysticks, Open ROPS,(5 Available) CN 80149 ..................................................$24,000

2005 S220 Bobcat Loader, 2040 Hrs, Cab, Heat & Air, CN 85831..........................................................................$23,000

2007 T300 Bobcat Track Loader, 1815 Hrs, Gold Pkg,Joystick Controls, CN 86799 ........................................$36,000

2011 T750 Bobcat Track Loader, 1350 Hrs, Gold Package, CN83482 ................................................................................$55,000

2012 S650 Bobcat Loader, 780 Hrs, Cab Heat & Air, CN 84093..........................................................................$34,000



888-746-6222www.pinnaclecranes.com

The Crane Service Company

Also Available:***Link-Belt 218HSL***2012 Year Model, S/N: N6K2-2459, 1,300 Hours, 120’

Boom, Block, Ball Sale Price: $760,000.00

***Link-Belt RTC8050***2011 Year Model, S/N: J6K1-2502, 700 Hours, 110’ Boom,

28.5’-51’ Offsettable Fly, 40 Ton 4-Sheave Block, 8.5 Ton

Ball Sale Price: $362,000.00

***Link-Belt RTC8050II***2012 Year Model, S/N: J6K2-2508, 1,100 Hours, 110’

Boom, 28.5’-51’ Offsettable Fly, 40 Ton 4-Sheave Block, 8.5

Ton Ball Sale Price: $375,000.00

***Link-Belt RTC8065***2012 Year Model, S/N: J9K2-2808,1,000 Hours, 115”

Boom, 35’-58’ Offsettable Fly, 40 Ton 4-Sheave Block, 8.5

Ton Ball Sale Price: $490,000.00

***Link-Belt RTC8090II***2011 Year Model, S/N: N4K1-2263, 1,300Hours, 140’ Boom, 35’-58’ Offsettable Fly, 60Ton 4-Sheave Block, 10 Ton Ball

Sale Price: $545,000.00All FOB: Charlotte, NC

Call For More Details!Jim Mackinson704-517-1942

Ask About SpecialPricing With Multiple

Unit Purchases!

***Link-Belt 218HSL***2011 Year Model, S/N: N6K1-2225 1,800Hours, 120’ Boom, Block, Ball

Sale Price: $732,000.00All FOB: Charlotte, NC


Get the ultimate up-close look at the future of concrete.Registration is now open for the show that offers an immense unveiling of all the newest equipment, technology and product breakthroughs in concrete. Bringing you the latest in everything from applications to sustainability, it’s the one show that lays the foundation for working smarter.

Register now at www.conexpoconagg.com to save over 30%!

REGISTER NOW TO SEE WHAT’S NEWREGISTER NOW TO SEE WHAT’S NEW

MARCH 4-8, 2014 | LAS VEGAS CONVENTION CENTER | LAS VEGAS, USA Co-located with ®2014


OVER 40 LOCATIONS ACROSS 11 STATES TO BETTER SERVE YOU.

MLM

F100-04-107387-21

L220 Skid Steer Loaders

Skid Loaders: Tracked

Industrial TLB

Industrial Equip

Excavators

Skid Steer Loaders Skid Steer Loaders Skid Steer Loaders


visit us on the web at

www.npkce.comvisit us on the web at

www.npkce.com

Please contact your

local dealer:Please contact your

local dealer:

ILLINOIS

ERB EQUIPMENT CO.

Mt. Vernon, IL (618) 244-6800

McALLISTER EQUIPMENT CO.

12500 South Cicero Avenue, Alsip, IL 60803 (708) 389-7700

East Peoria, IL (309) 694-4455 Rockford, IL (815) 227-0555

Springfield, IL (217) 789-0351 Villa Park, IL (630) 530-7600

INDIANA

ERB EQUIPMENT CO.

Evansville, IN (812) 473-0484

WEST SIDE TRACTOR SALES CO.

Bloomington, IN (812) 333-9677 Fort Wayne, IN (260) 482-8576

Indianapolis, IN (317) 544-3411 Lafayette, IN (765) 447-6933

South Bend, IN (574) 232-1461

IOWAROAD MACHINERY & SUPPLIES CO.

Des Moines, IA (515) 282-0404 Sioux City, IA (712) 252-0538

KANSAS

ROAD BUILDERS MACHINERY & SUPPLY

1001 S. 7th Street, Kansas City, KS 66105 (913) 371-3822

KENTUCKY

ERB EQUIPMENT CO.

Owensboro, KY (270) 684-2339 Paducah, KY (270) 554-1131

NORTRAX INC.

13090 Aiken Road, Louisville, KY 40223 (502) 253-3721

Bowling Green, KY (270) 842-3400 London, KY (606) 862-8447

Richmond, KY (859) 623-2030

MICHIGAN

ROAD MACHINERY & SUPPLIES CO.

Iron Mountain, MI (906) 774-7011

MINNESOTA


5633 W. Highway 13, Savage, MN 55378 (952) 895-9595

Duluth, MN (218) 727-8611 Virginia, MN (218) 741-9011

MISSOURI

ERB EQUIPMENT CO.

200 Erb Industrial Drive, Fenton, MO 63026 (636) 349-0200

Cape Girardeau, MO (573) 334-0563 Cuba, MO (573) 885-0500

Foristell, MO (636) 463-2501

MIDWEST MACHINERY (division of Road Builders)

1480 S. State Hwy. T, Springfield, MO 65802 (417) 732-5505

NEBRASKA

ROAD BUILDERS MACHINERY & SUPPLY

Omaha, NE (402) 331-9200 Lincoln, NE (402) 325-0447

Grand Island, NE (308) 384-2620

NORTH DAKOTA

GENERAL EQUIPMENT & SUPPLIES, INC.

4300 Main Avenue, Fargo, ND 58103 (701) 282-2662

Bismarck, ND (701) 223-9700 Minot, ND (701) 852-0479

OHIOMURPHY TRACTOR & EQUIPMENT CO., INC.

Brunswick, OH (330) 220-4999 Cambridge, OH (740) 439-2747

Canton, OH (330) 477-9304 Chillicothe, OH (740) 663-5300

Cincinnati, OH (513) 772-3232 Columbus, OH (614) 876-1141

Lima, OH (419) 221-3666 Painesville, OH (440) 639-0700

Poland (Youngstown), OH (330) 629-6299

Vandalia (Dayton), OH (937) 898-4198

WISCONSIN

ARING EQUIPMENT CO., INC.

13001 W. Silver Spring Drive, Butler (Milwaukee),

WI 53007 (262) 781-3770

DeForest, WI (608) 846-9600

DePere (Green Bay), WI (920) 336-3601

Eau Claire, WI (715) 835-6133

NPK’s Material Processors and Primary/Secondary Crushers are equipped with our exclusive intensifiersystem that boosts power by amplifyinghydraulic cylinder pressure!This integral device alsoreduces cycle time, improving productivity by providinggreater power-to-weight ratios.

NPK manufactures a comprehensive line of Hydraulic Breakers

Material Processors Compactor/Drivers Primary/Secondary Crushers

Pedestal Boom Systems

CON

EXPO - CON /A

GG

2014®

VISIT US AT

LAS VEGAS USAMarch 4-8, 2014Central Hall 1

30140


ConExpo 1981ConExpo 1981 — Everything’s Truly Bigger in Texas

I received my first copy of the Midwest edition and was surprised to see the article onthe 1975 ConExpo in Chicago.Next year I will have been in this industry for 45 years and this was my first ConExpo— have not missed one since. That year, Clark Equipment changed the brand on all theirproducts to Clark. Products from Lima, Austin Western, Hancock, Michigan were allbranded Clark.In your article, you mention one of the attractions as being a rubber-tired loader, toobig to fit inside. That was the Clark 675. Funny thing is that IH had a loader inside thatwas identified as the largest payloader in the world. People kept asking me if that waslarger than the 675. My response was, “You see the payloader was displayed inside andthe 675 outside because it would not fit inside.” In 1975, Clark people working the show had bright yellow blazers and blue pants. Istill had the jacket up until about five years ago.The celebrities you mentioned in your article were also from the Clark display. GeorgeBlanda, Kenny Stabler, and Roger Staubach were all brought to the show by ClarkEquipment.It was cold — five below zero and I could not get my 1972 Ford Maverick started.I showed the article around the office. Most comments were like this — “I was notborn yet,” “I was five years old” and even Tim Frank, our chairman, was a teenager in’75.It was a great article and as Bob Hope said, “Thanks for the Memories.”Regards, Rich JilekDirectorSANY Parts OperationsPeachtree City, Ga.

(This story also can be found on Construction EquipmentGuide’s Web site at www.constructionequipmentguide.com.)

Letter to the Editor


Houston, Texas

The words big, bigger, biggest and jumbowere commonplace in Houston, Texas, duringConExpo ’81 at the Astrodome Complexbetween Jan. 25 and 30.

Big applied to the city of Houston, its express-ways, the Astrodome, the Astrodome area, theequipment that was on display, from toweringGrove hydraulic cranes to 19 yard hydraulicshovels to monster 1,000 hp bulldozers, to thesuper boxes in the upper reaches of theAstrodome itself. Another big was the crowd.Estimates ranged as high as 200,000, wellexceeding the guestimates by the CIMA people.

One of the things that make ConExpo ’81 thegreatest show on earth is the diversity andbreadth of the exhibitors. Nearly every conceiv-able type of equipment and service a contractormay want to use was represented at ConExpo.

This ConExpo article was published inConstruction Equipment Guide (CEG) rightafter ConExpo 1981 concluded in January. Thisand other ConExpo articles to follow will bepart of a continuing series that take a look backat ConExpos past through the reporting of CEG.We hope you enjoy these retros as much as wedid searching for them deep in our archives.

see CONEXPO page 54



THE PERFECT SOLUTIONFOR MINIEXCAVATION!

THE PERFECT SOLUTIONFOR MINIEXCAVATION!

Extend Manufacturing, LLC

www.tmx-excavator.com

888.359.3002

TOW DIG DRIVE

See You at ICUEE Booth

K173

Visit www.sealsaver.com for more information or contact us at 1-800-683-5189

Exclusively manufactured by:

Fluid ControlServices, Inc.1155 Allgood Road • Suite 15

Marietta, GA 30062

1-800-683-5189Fax: 770-509-5832

The SEAL SAVER*WILL:

• Eliminate rod scoring

• Extend the life of cylinder seals

• Protect cylinders from the elements

• Prevent pitting due tochemical washes

• Reduce particle contamination of

hydraulic systems

• Minimize dings and dents associated with

falling debris*Patented

Made inthe USA

SEAL SAVERhas proven effective in

Recycling, Construction,Mining, Rock Quarries, Waste

Management, Refineries, WoodProducts Processing, Steel

Mills and Hot Slag Industries.


Illinois Contractor Completes Storm-Water Pump StationBy James McRaySPECIAL TO CEG

Manusos General Contracting,based in Fox Lake, Ill., recentlycompleted casting-in-place a newstorm-water pump station for thevillage of Elmwood Park, Ill.,which was no small feat.The structure was 37 ft. (11.3 m)

wide, 50 ft. (15 m) long and 30 ft.(9 m) tall. Adding to the excavationproject’s already challengingparameters was the fact that thebehemoth pump station needed tobe installed adjacent to a veryexclusive country club, with thegolf course’s seventh fairwayabout 30 ft. (9 m) away from theexcavation site.This was the first time Manusos

had ever attempted installing anyunderground utility of this magni-tude. Some may have been con-cerned that Manusos “had bittenoff more than they could chew,” asthe saying goes. Instead of beingintimidated by the new challenges,Manusos dug right in (no punintended) and sought the help theyneeded to get started.

Step by Step ProcessLeads to Efficiency Production Slide Rail

SystemStep one was to determine

which shoring system to use on theproject; not a simple task consider-ing the size. Really only two

shoring system can safely shore apit so large, driven tight-sheetingor a Slide Rail System. Don Manusos, consultant of his

namesake company, ultimatelychose bidding the project with aSlide Rail System for one simplereason: “Compared to sheeting, it

was cheaper,” Manusos said,“Maybe $165,000 cheaper.Looking at pictures and video ofthe [Slide Rail] system, it seemedlike it goes in a lot cleaner and eas-ier and takes up less room,”Manusos added.With the shoring system decid-

ed, Manusos needed to find theright Slide Rail System that includ-ed factory support and installationassistance. To that end, Manusoscontacted manufacturer EfficiencyProduction’s Special OperationsShoring Division, who could pro-vide both.

Efficiency Production’s SlideRail is a component shoring sys-tem comprised of steel panels(similar to trench shield sidewalls)and vertical steel posts. The highlyversatile system can be used in avariety of configurations. In addi-tion to the obstruction-freeClearSpan configuration,Efficiency’s Universal Slide Railcan be configured into small four-sided pits; or in a Multi-Bay con-figuration to install large tanks andstructures; or lengths of pipe over40 ft. (12 m).

Manusos Crew Quickly OvercomesLearning Curve onInstalling Big ShoringManusos rented from Efficiency

Shoring & Supply — EfficiencyProduction’s factory-directChicago rental branch — equip-ment to install a 42 by 53 by 32 ft.ClearSpan Slide Rail System.Efficiency Shoring & Supply’sChicago Branch Manager, MarkMitchell, was on site to helpManusos with the critical initialsteps of installing the Slide RailSystem.“The Manusos crew were a

hardworking group of guys, com-pletely green to something likethat,” Mitchell said. “But theycaught on very quick despite thatfact it was all new.”Slide Rail is installed simultane-

Efficiency Production’s Slide Rail is a component shoring system comprised of steel panels (similarto trench shield sidewalls) and vertical steel posts.

Manusos General Contracting, based in Fox Lake, Ill., recently completed casting-in-place a new storm-water pump station for the village of Elmwood Park, Ill.

Don Manusos, consultant of his namesake company, ultimately chose bidding theproject with a Slide Rail System for one simple reason: “Compared to sheeting, itwas cheaper,” Manusos said, “Maybe $165,000 cheaper. Looking at pictures andvideo of the [Slide Rail] system, it seemed like it goes in a lot cleaner and easier andtakes up less room.”

see MANUSOS page 101

New Caterpillar Waste Buckets Push, Lift High VolumeCaterpillar introduces two new

wheel loader bucket designs — thedozing bucket and the load-and-carry bucket — for solid wastehandling in transfer stations andrecycling centers. The buckets arespecifically designed to enhancethe productivity of Cat small andmedium wheel loaders in wasteapplications.

The buckets range from 6.0 to14.0 cu. yd. (4.6 to 10.7 cu m) andcomplement Cat wheel loadersranging from the 924K to the980K. Two distinct types of wastebuckets give the fleet manager theability to choose the optimumbased on the facility layout and thespecific tasks to be performed.Both types of buckets can beequipped with bolt-on cutting

edges or rubber edges to suit therequirements of the facility.

Dozing BucketPushes High Volume

The Cat dozing buckethas a shallow throat and ataller profile than a stan-dard bucket. It is specifi-cally designed to pushloads along the floor toa hole or hopper thatfeeds a hauler orprocessing machinebelow. The bucketdesign has high vol-ume for its size,because it pushes theload rather than carry-ing it. In addition to itshigh volume, the

strength of the dozing bucket is itsfast loading capability due to itsdeep floor design.

Cat dozing buckets also featurerobust design and construction forextended durability. Visibility tothe load is improved with theuse of bars instead of screens.

Load-and-Carry BucketLifts High Volume

The Cat load-and-carrybucket has a deeper throat andless height compared to the doz-ing bucket, which enables it to

carry high volumes. It’s designedfor light weight materials andachieves a fill factor of 1.3 orgreater.

The bucket can be used forstockpiling or loading haulers or

pushing away from trucks tippingon the floor. The bucket designenables the loader to work in anyfacility layout — loading belowgrade, partial grade separation or atthe same level. The load-and-carrybucket has tamping capabilities tohelp ensure haulers are fullyloaded.

Cat load-and-carry buckets fea-ture high strength construction anddurability. Bars, rather thanscreens, provide improved sightlines through the upper part of thebucket and to the load.

For more information, visitwww.cat.com/waste.


Construction Equipment Guide’s

Web site at www.constructionequip-

mentguide.com.)

Pages 37-39For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

SECT IONAttachments

Leading Edge Offers NewMulti-Ripper Talon Bucket Leading Edge AttachmentsInc. now offers the multi-ripper talon bucket as thenew addition to the multi-ripper SHARC productline. LEA multi-ripperproducts often replacehammers, blasting androck trenchers. Designedmainly for utility pipelinecontractors, the new multi-ripper talon bucket workson the same principle asthe multi-ripper bucket,except the bucket is very narrow, and the leading edges have been redesignedso that the center rib can be eliminated, thus improving capacity fill anddumping for a narrow bucket. The performance of this style of maximumbreakout “one tooth at a time” bucket exceeds all other designs of rock buck-et ripper combinations and has saved hundreds of thousands of dollars byavoiding the use of rock trenchers, hammers and blasting, according to themanufacturer.For more information, call 866/928-5800 or visit www.digrock.com.The SH360 is designed for those hard to

reach stumps that cannot be safely accessed with normal stumper carriers.

The buck-ets range from 6.0to 14.0 cu. yd. (4.6 to 10.7 cum) and complement Cat wheel loadersranging from the 924K to the 980K.

Fecon Introduces ExcavatorPowered Stump Grinder

Fecon Inc.’s SH360 excavator stumper is the newestaddition to its stump grinder product line. The SH360mounts to any 20+ton (18 t) excavator via a bolt-onmount custom fit to the particular excavator. Hydraulicsand drive train can be set up for the power provided bythe excavator in the 45 to 65 gpm (170 to 246 Lpm)range and up to 5500 psi. For ultimate performance theSH360 can be set up for the Fecon BHP170 and BHP250self-contained powerpacks with Fecon power manage-ment that deliver 65 to 105 gpm (246 to 397 Lpm).

The SH360 is designed for those hard to reach stumpsthat cannot be safely accessed with normal stumper car-riers.

For more information, call 800/528-3113 or visitwww.fecon.com.

(This story also can be found on ConstructionEquipment Guide’s Web site at www.constructionequip-

mentguide.com.)

Page 38 • September 14, 2013 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

®

visit: www.digrock.come-mail: [email protected]

call to order:866-928-5800 or 508-829-4855

"Leader in Excavator Rock Ripping Attachments"eadingdge

ttachments,

Inc.

Multi-ply Your Money!®

with the excavator rock ripping

Multi-Ripper BucketMulti-Ripper BucketMulti-Ripper

TM

Maximize forceone tooth at a time,using our patented

"Shanks on an Arc"technology.

6 to 9 times the forceof a standard 5 tooth bucket

4 times faster than a hammer

As seen on

Discovery channel’s

#1 hit show

“Gold Rush”

Multi-RipperBucket

Hi-CapMulti-Ripper

Bucket

Roadrunner C Series EvolvesWith Bolster Wheels Addition

The Roadrunner C series grader-spreader-maintainer has evolved to become theSuper “C” with the addition of bolster wheels. It retains its ability to grade packedgravel, especially with the serrated cutting edge and it continues with independentadjustment to each side to create and maintain a crown and controls depth of cut.The long skid bars prevent dipping and gouging, and the side panels eliminatewindrows and retain the material within the area being graded. Angled dual bladesprevent washboards.For more information, call 410/420-1777 or visit www.roadrunnerblade.com.

Grouser’s V3 Flex Plane Designed toAttach to Any Skid Steer Make, ModelGrouser Products’ V3FlexPlane is the manufactur-er’s latest in a series ofheavy duty, contractor-gradeattachments. Grouser’s V3FlexPlane is designed toattach to any make andmodel of skid steer. The heavy-duty V3

FlexPlane features a versa-tile self-adjusting blade thatrotates to contour to uneventerrain. Designed for highproductivity, it features twodouble-beveled hardened cut-ting edges. Built with heavy-duty, con-

tractor-grade materials andcomponents, the V3FlexPlane is designed for lowmaintenance and long productlife and is offered in five modelsof varying length. Available sizesare 72-, 78-, 84-, 89-, and 96-in.(183, 198, 213, 226 and 244cm). For more information, call

800/747-6182 or visitwww.grouser.com.

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • September 14, 2013 • Page 39

PROVIDING SUPERIOR PRODUCTS & SUPPORT SINCE 1996

ASK ABOUT OUR BREAKER AUTOLUBE SYSTEMS!


U.S. Senate Committee AcceptsICPI Provision on THUD BillThe U.S. Senate Appropriations

Committee has agreed to include a perme-able pavements provision in the committeereport to accompany the Senate version ofthe “THUD” Appropriations Bill.The language was drafted and offered to

the Senate by the Interlocking ConcretePavement Institute, ICPI.“THUD” is the key appropriation to fund

all activities by the U.S. Department ofTransportation and the Federal HighwayAdministration, and is of paramount interestto all transportation business stakeholders.David Pitre, ICPI’s board chairman-elect,

hailed the action taken by the SenateCommittee as an “extension and expansionof the language that ICPI secured on theMAP-21 Transportation Authorization law.ICPI is helping government institutions at alllevels overcome outmoded barriers to adop-tion and increase the use of pavers to obtaintheir public policy benefits in transporta-tion.”The permeable pavements appropriation

language is the first action by ICPI in theappropriations element of transportationissues on Capitol Hill.Charles McGrath, ICPI’s executive direc-

tor, added that “ICPI’s activities on this effortreflect the association’s commitment to

grow paver penetration into the huge U.S.transportation network as a mainstreamtechnology to expand and upgrade the trans-portation infrastructure.”The provision offered by ICPI is included

in Senate Report 113-45, and urges the U.S.Secretary of Transportation to expenddiscretionary funds to address the pur-poses set forth in MAP-21.However, the appropriations provi-

sion expands USDOT/FHWA activi-ties to include testing of high-trafficpermeable pavements using infiltra-tion concrete or asphalt bases, valida-tion of hydrologic/hydraulic/pollutantremoval performance data and model-ing, and data collection and reportingon permeable pavements, installation,maintenance and life cycle costs. The com-mittee provision further directs USDOT toissue reports on its findings to State andmunicipal transportation agencies.“ICPI staff are working closely with

USDOT/FHWA officials to implement thenew policy and encourage the agencies toallocate discretionary funds to these tasks,”said McGrath.Randall Pence of Capitol Hill Advocates,

ICPI’s Government Affairs Counsel, com-mented that “the ICPI appropriations provi-

sion was made possible in large part by theprior placement of the permeable pavementslanguage in MAP-21. Procedurally, the pro-visions are designed to work in tandem, andalso to lay the foundation for the successorbill to MAP-21.”

At least one Senate staff member calledthe ICPI action “a bold move” on the heelsof ICPI securing permeable pavements lan-guage on MAP-21 a short time ago — thefirst appearance of permeable pavementspolicy sought by ICPI. Nonetheless, ICPIwas able to convince members of the Senatethat permeable pavements should share thefuture of the U.S. transportation infrastruc-ture.Pitre, McGrath and Pence jointly praised

the leadership and foresight of the Senate

Appropriations Committee, particularlySens. Patty Murray (D-WA) and SusanCollins (R-ME), for their bipartisan work onthe THUD subcommittee. Collins is particu-larly interested in how permeable pavementscan provide environmentally-friendly

stormwater reduction enhancementsto the nation’s transportation infra-structure.In addition, ICPI thanked Sen.

David Vitter (R-LA), a key player inpassing MAP-21, who signed a letterto the appropriations committee sup-porting the inclusion of the permeablepavements language.Floor action was expected on both

the Senate and House versions of theTHUD Appropriations Bill during the

week of July 22. ICPI is lobbying the HouseCommittee on Appropriations with respectto ICPI’s support for the Senate language.ICPI has asked the House Committee toaccept the Senate language during theupcoming House-Senate conference to con-solidate all proposals into a final bill to besigned into law.For more information, visit www.icpi.org.(This story also can be found on



“ICPI staff are working closelywith USDOT/FHWA officials toimplement the new policy…”

Charles McGrathInterlocking Concrete Pavement Institute

Caterpillar’s VisionLink 2.7Give Managers Greater ControlCaterpillar has enhanced the ability of

managers to monitor equipment remotelywith the latest release of VisionLink2.7. Product Link’s intuitive userinterface provides customers amobile optimized web application,the ability to schedule automateddelivery of VisionLink reports andremote access to on-board payloadsystem information. The mobile application is avail-

able on iOS, BlackBerry,Android/Chrome and Windowsoperating systems. Introductoryfunctionality enables viewing thelocation of assets on a map, trackingscheduled services, viewing faultcodes and open alerts and accessingidle, working and runtime through asmartphone. New productivity functionality

leverages existing onboard payloadsystems for wheel loaders and off-highway trucks equipped with suchsystems. Managers can remotelymonitor information such as totalpayload moved per day and totalpayload per hour and per unit of fuel.This new integration adds to the cur-

rent productivity capabilities of theVisionLink application, which include the

ability to track load counts and cycle timesbased on switch and machine movement

input, as well as advanced integration withon-board grade control systems to enable

detailed monitoring of earthmoving,grading and finishing projects.In addition, VisionLink now pro-

vides timely visibility to the informa-tion your business needs throughdaily, weekly and monthly reportsscheduled in advanced and deliveredvia email to those who need to know.Cat Product Link is a robust

remote monitoring and asset man-agement solution, enabling powerfultools that transform data from anentire fleet into the essential informa-tion required to boost productivity,reduce costs and manage risks.Product Link’s intuitive interface,VisionLink, makes it easy for a man-ager to monitor data from the wholefleet and then to zoom in for adetailed look at individual assets,according to the manufacturer. For more information, visit

www.cat.com.(This story also can be found on



guide.com.)VisionLink display of mixed fleet.

The Boss Snowplowunveiled a new fullyhydraulic plow for ATV use,giving the popular recre-ational vehicle the capabilityto multi-task for quick andeasy snow removal. Thisnew product introductioncomplements the full lineupof UTV plows currentlyavailable expanding TheBoss product line deeper intothe off-road market.The Boss 5 ft. (1.5 m) poly

straight-blade ATV plow isdesigned with a low-profileundercarriage for Polaris550/850 Sportsman models.

Additional models will beavailable soon. When theATV plow is not attached,the ATV will remain trailcompatible. “Demand for our small

but powerful snowplowscontinues to grow. This newATV plow offers the samerugged BOSS features andquality enhancements foundin our full-size models,” saidMark Klossner, marketingdirector of The BossSnowplow. “For homeown-ers and ATV enthusiasts, thatmeans they can make maxi-mum use of their vehicle

when not on the trail.”The Boss ATV plow fea-

tures a fully hydraulic,winchless system providinga full 30 degress of liftingheight and 30 degress ofpower angling for highersnow stacking. The high-per-formance hydraulic packageis fully enclosed to protectagainst corrosion andhydraulic freeze-up.Attachment of The Boss

ATV Plow is fast and easywith The Boss RT3 hitch sys-tem. The switch box con-troller is easy to mount forconvenient accessibility on

the ATV handle bar and isergonomically designed formaximum comfort whileplowing, according to themanufacturer. Every plow features The

Boss’ SmartShield finish todeliver corrosion protectionand a long-lasting, high-gloss shine. For more information, call

800/286-4155 or visitwww.bossplow.com.

(This story also can be

found on ConstructionEquipment Guide’s Web site at

www.constructionequipment-

guide.com.)

Boss Snowplow Introduces Fully Hydraulic ATV Plow

The Boss 5 ft. (1.5 m) poly straight-blade ATV plow isdesigned with a low-profile undercarriage. When theATV plow is not attached, the ATV will remain trailcompatible.

Pages 41-47

Snow and Ice SectionFor more information on snow-clearing equipment and spreaders, visit CEG's Web site at www.constructionequipmentguide.com.

The FFC snow push by Paladin Attachments attaches toskid steers, backhoes, compact wheel loaders and traditionalwheel loaders to efficiently move large volumes of snowwithout leaving windrows. Available in widths ranging from6 to 16 ft. (1.8 to 4.8 m), it can move up to 21 cu. yds. (16 cum) of snow at one time. An optional pull-back kit cleanlydraws back snow away from buildings, fences and confinedareas, creating a more effective snow removal process. Inaddition to snow applications, the FFC snow push is ideal forwaste water, manure, feed, lot and food cleanup, accordingto the manufacturer. The FFC Snow Push is available in 127 Series, 3600

Series and 4800 Series models. The FFC 127 Series snowpush offers lighter weight models designed for skid steersand is ideal for snow removal in confined spaces. Availablein widths ranging from 6 to 10 ft. (1.8 to 3 m), it can moveup to 8 cu. yds. (6 cu m) at one time. The FFC 3600 Seriessnow push attaches to skid steers, backhoes and compactwheel loaders and is available in widths ranging from 8 to 14ft. (2.4 to 4 m). It is able to easily move up to 13 cu. yds. (9.9cu m) at one time. The FFC 4800 Series snow push has a width of 16 ft. (4.8

m) and attaches to backhoes, compact wheel loaders and tra-ditional wheel loaders. Ideal for larger applications, it has apush capacity of 21 cu. yds. (16 cu m).For more information, call 800/456-7100 or visit

www.paladinattachments.com.(This story also can be found on Construction Equipment


Paladin’s FFC Snow Push Removes More Than Just Snow

The FFC snow push attaches to skid steers, backhoes, compact wheel loaders and traditional wheel loaders toefficiently move large volumes of snow without leaving windrows.

Page 42 • September 14, 2013 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

With dual-trip design, nothing obstructs THE BOSS Power-V DXT Plow. Integrating trip-edge and full-trip moldboard designs provides enhanced protection when striking obstacles. Just one more reason THE BOSS

moves the industry further.

KEY FEATURES:Dual-Trip DesignFlared Blade Wings

Heavy-Duty Push Frame and Quadrant

SmartHitch® 2

SmartLight ® 2SmartTouch® 2 SmartShield®

THE DXT PLOW:Power-V DXT - 10’0”

( D E A L E R I M P R I N T )STOP IN TODAY!

© 2013 BOSS Products / Northern Star Industries, Inc. b o s s p l o w . c o m

MOVE AT THE SPEED OF THE

STORM.

CRYSTEEL TRUCK EQUIPMENT52248 Ember Rd.

PO Box 733Lake Crystal, MN 56055

800-722-0588

1130 73rd Ave. N.E.Fridley, MN 55432800-795-1280

www.crysteeltruck.com

TOPPERS PLUS1929 E. Madison Ave.Mankato, MN 56001

800-321-7587www.toppersplus.com

CANNON TRUCK EQUIPMENT51761 Danview Technology Court

Shelby Twp., MI 48315586-991-0054

Fax: 586-991-0074www.cannonequip.com

Stainless Steel Tailgate SpreaderDesigned to Meet High DemandsCrysteel Manufacturing’s stain-less steel tailgate spreader isdesigned to effectively spreaddeicing materials while meetingthe high demands for efficiencyand dependability all winterlong, according to the manufac-turer. Corrosion resistantstainless steel delivers durabili-ty in the toughest environments,and a fully tapered trough elim-inates all flat surfaces, prevent-ing material hang ups.

Available with a 6- or 9-in.(15 or 23 cm) auger, the tail-gate spreader also features afull opening bottom troughhinged on the body side foreasy accessibility and cleanout. The direct drive designminimizes maintenance andallows independent control ofthe auger and spinner. TheCrysteel stainless steel tailgatespreader is backed by a two-year warranty.

Boss SnowplowReveals First BossV-Box SpreaderBuilt for the snow removal professional seeking to service

more accounts faster while saving on materials costs, TheBoss Snowplow introduces the VBX spreader, its first V-BoxSpreader featuring an 8 ft. (2.4 m) poly hopper with 2 cu.yds. (1.5 cu m) of capacity. Customers can choose from bothpintle chain and auger feed options.The VBX spreader’s stainless steel drive train components

are corrosion resistant for reduced maintenance and longerlife. Both the pintle chain and the auger system feature aheavy-duty design for long life and reliability. On the pintlechain option, a chain cleaning brush removes excess materi-al, while a chain-link shield keeps excess debris from com-ing in contact with the chain. Also a VBX pintle chain fea-ture, a full-length, slide-out tray captures any falling de-icingmaterial, keeping it from the truck’s bed, which greatlyreduces corrosion damage to the vehicle, according to themanufacturer.“Professionals seeking the large capacity and convenience

that a V-Box spreader offers can now get these benefits withBoss quality engineering,” said Mark Klossner, marketingdirector of The Boss Snowplow. “All of our spreaders arebuilt with BOSS durability and toughness and the VBXspreader is no exception. Like our other spreader products,we’ve also added the special touches our customers havecome to expect from The Boss.”Powered by a completely sealed, ½-hp, stainless steel

motor, The Boss VBX Spreader is designed for reliability. Amassive gear box is outfitted with both planetary and wormgears for more robust operation and maximum durability.A new Boss V-box control system features a dual motor

control and an intuitive LCD cab control system for ease ofuse. A rear-mounted dump switch allows operators to quick-ly dump remaining material to cut down on waste. The spin-ner assembly is quickly removable for ease of service andmaintenance.Standard equipment includes auxiliary lighting, center

high mounted stop lamps, a tarp with integral tie downs anda top screen. For more information, call 800/286-4155 or www.boss-

plow.com.(This story also can be found on Construction Equipment


The VBX spreader’s stainless steel drive train compo-nents are corrosion resistant for reduced maintenanceand longer life.

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • September 14, 2013 • Page 43


of a box blade, an angle blade, straight blade, and reverse box blade in one unit. 4 blades in 1, it doesn’t get much better than this.

skidsteer, or tractor contact HLA Snow.

See the SnowWing in action at www.hlasnow.com/ceg

Pate

nted

The Boss Snowplow Launches Full Lineup of DXT PlowsFeaturing a dual-trip design, The

Boss Snowplow introduces new 8ft. 2 in. and 9 ft. 2 in. (2.5 and 2.8m) poly, steel and stainless steelDXT plows providing maximumplow and vehicle impact protectionin a multi-position plow. Thesenew plows join the 10 ft. (3 m)Steel DXT offering snow removalprofessionals a full range of tough,reliable V-Plows to tackle largeamounts of snow from any anglewith ease.

“Road hazards and obstacles area way of life for snow removal pro-fessionals,” said Mark Klossner,marketing director of The BossSnowplow. “That’s why we creat-ed the DXT plow. This innovationcombines the best in trip-edge andfull moldboard trip technologies tominimize damage to the plowwhen obstacles are encountered.The DXT is our latest example ofhow The Boss backs up its cus-tomers so they can worry lesswhen on the job.”

Dual-Trip DesignThe Boss’ dual-trip design of the

DXT delivers enhanced plow pro-

tection when striking hidden obsta-cles. The base angle trips inde-pendently, significantly reducingimpacts when lower obstacles,such as manhole covers, are hit.The Boss full moldboard trip pro-tects against taller obstructions (6in. [15 cm] or more), such asfrozen snow banks when in vee,

scoop and angled positions.Heavy-duty torsion springs pro-

vide maximum trip-edge perform-ance and reliability and durabilityfor years of hassle-free operation,according to the manufacturer. Tominimize blade twisting, the DXTfeatures heavy-duty push framesand center sections. For ease of

use, The Boss DXT family utilizesthe SmartHitch 2 attachment sys-tem.

Additional features and benefitsinclude a flare-wing design tothrow snow higher and farther; afully enclosed, weather-protectedhydraulic system offering lowmaintenance operation in even the

worst conditions; and wear-resist-ant curb guards and snow catcher.

For more information, call800/286-4155 or visit www.boss-plow.com.




mentguide.com.)

Featuring a dual-trip design, The BossSnowplow introduces new 8 ft. 2 in. and 9ft. 2 in. (2.5 and 2.8 m) poly, steel andstainless steel DXT plows providing max-imum plow and vehicle impact protectionin a multi-position plow.


2013 Ram 35004x4, Cab & Chassis, Knapheide Flatbed &

Boxes, PW PC HC A/C GC AT

MSRP $45,946

$avings $ale $37,997*

2013 Ram 3500Crew 4x4 Dually AIS A/T 850 Cummins P/W,

P/L, T/C, A/C, 208W Tommy, Bedliner

MSRP $53,930


2013 Ram 3500Crew Longhorn 4x4 Aisan Trans 850 Cummins

20600 Towing, Too much to list, 5 in stock

MSRP $66,000


2013 Ram 3500Heavy Duty 4x4 Crew Cab Tradesman P/W,

P/L, A/T, HD Cummins, Bedliner & More,Longbox

MSRP $49,420


2012 Ram 45004x4 Cab & Chassis, Cummins / PTO, PW PC

TC A/C, Stainless Dump

MSRP $63,440


2013 Ram 2500 HPStd Cab 4x4 PW PC T/C A/C & More, Himhey

Plow & Sander

MSRP $51,105


2013 Ram 5500Cab & Chassis Crew Cab 4x4 P/W, P/L, T/C,

A/C, PTO Max Tow B20

MSRP $54,790


2013 Ram 35004x4 Cab & Chassis w/Reading Aluminum

Service Body Maxtow B20 Pck. HD Pkg, 6.7Cummins P/W, P/L, T/C, A/C

MSRP $57,235


2012 Ram 2500Crew ST P/W, P/L, T/C, Cummins A/C Antispin

MSRP $47,665


2013 Ram Caravan CargoP/W, P/L, T/C, A/C

MSRP $23,310


2013 Ram 55004x4, Cab & Chassis Cummins Aisian PTO,

Ram II FT Box Boss v/Plow

MSRP $63,440


2013 Ram 25004x4 Cummins HD Package, Boss Plow

MSRP $50,715


2012 Ram 2500Mega Hemi Longhorn HD Snowplow Pkg.

Too much to list

MSRP $52,880


2012 Ram 4500Cab & Chassis Standard Regular Cab 4x4 A/C,

P/W, P/L, T/C, Max Tow B20

MSRP $48,845


Promaster 1500FWD V/6 Auto, P/W, P/L, T/C, A/C

MSRP $31,025


2013 Ram 5500PU PC T/C Aisian Cummins PTO & More,

Knapheide Control Box

MSRP $63,950


#1Chrysler Corp. Commercial

Dealer in Minnesota

We Deliver!

The fast lane for small business.

12 Cabs and Chassis in Stock

More Coming!RAM H.D. HEADQUARTERSFURY MOTORS South St. Paul, Minnesota

Truck Master Dick Reineck • 651.251.8214 direct • [email protected] * Pricing represents all Denver business center rebates deducted!



HIG

H-P

ERFO

RM

AN

CE

CO

MM

ERC

IAL

PLO

WS TRIP-EDGE

C-PLOWS

FULL-TRIP CONVENTIONAL PLOWS

SPR

EAD

ERS

STRENGTH &PERFORMANCE Hiniker offers a comprehensive line of professional grade snowplows to meet the demands of the toughest conditions and snowplow operations.

VF-PLOWS: Trip-edge design gives smooth operation and effective protection with a nine-inch high pivot point. Double acting cylinders provide positive moldboard position control. Now available in fl ared-wing and fl at-top confi gurations.

C-PLOWS: Get the heavy-duty performance of the Hiniker trip-edge conventional plow plus the added versatility of a high performance backdrag plow. An amazing time-saver in driveways, parking lots and loading docks.

SCOOP PLOWS: High capacity concave shape captures snow to effi ciently clear lots and parking areas. Angles left or right for conventional plowing.

CONVENTIONAL PLOWS: 30 inch tall high-curvature blades roll deep snow off quickly and efficiently. Commercial plowers will appreciate the extra strength and efficient design.

SPREADERS: Snow removal contractors looking for additional profits will find them in ice control. Spread ice control materials quickly and easily with an efficient Hiniker Spreader. Choose between OHV gas engine spreaders or dual-motor electric spreaders.

TRIP-EDGE CONVENTIONAL PLOWS

TRIP-EDGE SCOOP PLOWS

HINIKER COMPANYhiniker

SPREADERSDUAL-MOTOR ELECTRIC

VF Series Flare-wing, Trip-edge V-Plow

New!

HIG

H-P

ERFO

RM

AN

CE

CO

MM

ERC

IAL

PLO

WS TRIP-EDGE

C-PLOWS

PERFORMANCEHiniker offers a comprehensive line of comprehensive line professional grade snowplows to meet the demands of the toughest gradeconditions and snowplow operations.

VF-PLOWS: Trip-edge design gives smooth operation and effective protection with a nine-inch high pivot point. Double acting cylinders provide positive moldboard position control. Now available in fl ared-wing and fl at-top confi gurations.

C-PLOWS: Get the heavy-duty performance of the Hiniker trip-edge C-PLOWS:conventional plow plus the added versatility of a high performance backdrag plow. An amazing time-saver in driveways, parking lots and loading docks.

SCOOP PLOWS: High capacity concave shape captures snow to effi ciently clear lots and parking areas. Angles left or right for conventional plowing.

CONVENTIONAL PLOWS: 30 inch tall high-curvature blades roll deep snow off quickly and efficiently. Commercial plowers will appreciate the extra strength and efficient design.

SPREADERS: Snow removal contractors looking for additional profits will find them in ice control. Spread ice control materials quickly and easily with an efficient Hiniker Spreader. Choose between OHV gas engine spreaders or dual-motor electric spreaders.

PERFORMANCEHiniker offers a gradeconditions and snowplow operations.

VF-PLOWS:protection with a nine-inch high pivot point.cylinders provide positive moldboard position control. Now available in fl ared-wing and fl at-top confi gurations.

C-PLOWS:conventional plow plus the added versatility of a high performance backdrag plow. and loading docks.

SCOOP PLOWS:effi ciently clear lots and parking areas. Angles left or right for

HIG

H-P

ERFO

RM

AN

CE

CO

MM

ERC

IAL

PLO

WS TRIP-EDGE

C-PLOWS

FULL-TRIP CONVENTIONAL PLOWS

conventional plowing.

CONVENTIONAL PLOWS:deep snow off quickly and efficiently.

cylinders provide positive moldboard position control. Now available in fl ared-wing and fl at-top confi gurations.

C-PLOWS:conventional plow plus the added versatility of a high performance backdrag plow. and loading docks.

SCOOP PLOWS:effi ciently clear lots and parking areas. Angles left or right for

TRIP-EDGEC-PLOWS

STRENGTH &PERFORMANCESTRENGTH PERFORMANCE

C-PLOWS

TRIP-EDGE CONVENTIONAL PLOWS

TRIP-EDGE SCOOP PLOWS

SPR

EAD

ERS

HINIKER COMPANYhiniker

SPREADERSDUAL-MOTOR ELECTRIC

VF Series VF Series Flare-wing, Trip-edge V-Plow

New!New!New!

BADER BROS., INC.16400 M-32

Hillman, MI 49746989-379-3000

Fax: 989-379-3030

www.baderbros.com

NORTH CENTRAL TRUCK& EQUIPMENT

2629 Clearwater RoadSt. Cloud, MN 56301

732 30th Avenue SEMinneapolis, MN 55414

877-485-9595

www.northcentralinc.com

TOPPERS PLUS1929 East Madison Ave.

Mankato, MN 56001507-387-7376

800-321-7587

www.toppersplus.com

TRUCK UTILITIES2370 English St.,

St. Paul, MN 55109651-484-3305

800-869-1075

2770 5th Ave S., Fargo, ND 58103

701-241-9411

800-972-9250

www.truckutilities.com


see FABCO page 100

FABCO CAT Celebrates Grand Opening of Two Locations

In front of the Cat D5K (L-R) are Jeff Wiedman, Today’s Tree Service; MikeGautsch, M.J.G. Excavating; Don Gautsch, Design Cabinetry; and FABCO’sJohn Andress.

Craig McArton (L), FABCO’s executivevice president and chief operating offi-cer, welcomes Mark Hoffman, HoffmanConstruction.

Enjoying the customer appreciation day at the La Crosse, Wis., facility are the guys fromAntony Excavating. (L-R): Vern Baker; Roger Antony (owner); Jeff Antony and Lyle Johnsonin front of the Cat 980K wheel loader.

Gary Witt Jr. (L) of S&R Inc. looks over the CatCT660L truck with Tim Kline, FABCOEquipment Inc.

Don and Elinore Miller, Miller Excavating,check out the Cat 420F backhoe loader.

Grand opening festivities at FABCO’s newfull-service facility featured a ribbon cut-ting ceremony, food, prizes and tours forcustomers.

FABCO Equipment Inc., the Caterpillar dealerfor Wisconsin and the Upper Peninsula ofMichigan celebrated the grand opening of not

one, but two, locations in La Crosse, Wis., on Aug.23.

Due to exciting growth in business opportunitiesthroughout western Wisconsin, FABCO made thedecision to significantly expand its operations in thearea to better fit the needs of its growing number ofcustomers. FABCO celebrated the completion of itslarger new full-service equipment and power sys-tems location and its completely new FABCO Rents– The Cat Rental Store location, which specializes indaily, weekly and monthly rentals of Caterpillarmachines, work tools, generators and aerial equip-ment.

The grand openings featured ribbon cutting cere-monies at both locations as well as food, prizes andtours for customers.


tionequipmentguide.com.) CEG


Copyright 2013 Terex Corporation. All rights reserved. Terex is a registered trademark of Terex Corporation in the United States of America and many other Countries.

CRANES

DELIVERING SUCCESS is what drives us. We are a global manufacturer with strong local roots and a broadproduct offering that refl ects over a century of EXPERIENCE. We are committed to SPEED, aiming for thehighest level of responsiveness in everything we do. We focus on getting the job done, ensuring maximumuptime and the highest return on investment. Because our customers’ RESULTS are what really matter.

Contact us to learn how we can work for you.1-877-MY-TEREX 1-877-698-3739

www.terex.com/cranes

For Your Local Terex Dealer, Please Contact: Terex USA, LLC106 12th St. SE

Waverly, IA 50677 USAPhone: (319) 352-3920Fax: (319) 352-9395

email: [email protected]: www.terex.com/cranes

RTL Equipment Inc.(RT-T-HC/CC-AT)

www.rtlequipment.com3000 SE Gateway Drive

Grimes, IA 50111515-986-0262

Fax: 515-986-0267

2601 120th St. NWSwisher, IA 52338

319-857-4045Fax: 928-441-1269

Custom Truck & Equipment(RT-T-HC/CC-AT-BT)7701 Highway 24

Kansas City, MO 64125800-861-1065

www.cte-equipment.com

All Erection & Crane Rental Corp.

(RT-T-HC/CC-AT-BT-Towers)4700 Acorn Dr.

Independence, OH 44131800-232-4100

Fax: 216-642-7633www.allcrane.com

BRANCH LOCATIONSAll Crane Rental of PA, LLC

Pennsylvania412-382-4200

All Crane & Equipment Rental Corp.West Virginia

304-766-0300

Dawes Rigging & Crane Rental, Inc.Wisconsin

414-453-5335

Jeffers Crane Service, Inc.Michigan

419-693-0421


BRANDEIS MACHINERY & SUPPLY COMPANYwww.brandeismachinery.com1801 Watterson Tr.Louisville, KY 40299502/491-4000502/499-3195 Fax Evansville, IN812/425-4491812/425-1171 Fax Corbin, KY606/528-3700606/528-9014 Fax Lexington, KY859/259-3456859/254-0783 Fax Stanville, KY606/478-9201606/478-9208 Fax Paducah, KY270/444-8390270/575-4907 Fax Indianapolis, IN317/872-8410317/872-8417 Fax Ft.Wayne, IN260/489-4551260/489-1620 Fax

CONTINENTAL EQUIPMENT CORP.A division of AISwww.aisequip.com3600 N. Grand River Ave.Lansing, MI 48906517/321-8000Fax: 517/321-4191

ROAD MACHINERY & SUPPLIES CO.www.rmsequipment.com5633 W Hwy 13Savage MN 55378952/895-9595800/888-9515Duluth, MN 218/727-8671800/888-9535Virginia MN218/741-9011800/752-4304Des Moines IA218/741-9011800/555-1445Sioux City IA712/252-0538800/633-9104Cedar Rapids IA319/363-9655800/616-6615Milan, IL309/787-1742800/633-9114

ROAD BUILDERSMACHINERY & SUPPLY CO., INC.1001 S. 7th St. TrafficwayKansas City, KS 66105913/371-3822913/371-3870 FaxOmaha, NE402/331-9200Lincoln, NE402/325-0447Grand Island, NE308/384-2620

CAWGC Names Scholarship WinnersThe Contractors Association of Will

and Grundy Counties’ (CAWGC)Scholarship Chairwoman BeckyFallin, president of RHL Insulation, hasannounced the 17th Annual CAWGCScholarships recipients: Alissa M.Alberico of Manhattan; Paige C.Dickison of Gardner; Kevin F. Filottoof Romeoville; and William F.Sieczkowski III of Orland Park.Alissa M. Alberico, a graduate of

Providence Catholic High School, willbe attending Georgia Institute ofTechnology and majoring in engineer-ing. Her parents are Kathleen and LuigiAlberico of J. S. Alberico Construction,a CAWGC member.Paige C. Dickison of Gardner, who

was homeschooled, will be a freshmanat Joliet Junior College. She will bemajoring in chemical engineering. Herparents are Roxanne and JohnDickison of Construction by CAMCO,a CAWGC member.Kevin F. Filotto, a graduate of Joliet

Catholic Academy, will be a senior atIllinois State University and majoringin construction management. His par-ents are Penny and James Filotto ofFilotto Construction, a CAWGC mem-ber.William F. Sieczkowski III, a gradu-

ate of Carl Sandburg High School, willbe attending University of Illinois atUrbana-Champaign and will be major-ing in civil engineering. His parents are

Elena Reklaitis and WilliamSieczkowski Jr. of R. Carlson andSons, a CAWGC member.Neta Hess, CR Leonard Plumbing &

Heating and Marsha Rolih, PierroQuality Electrical also were serving onthe scholarship committee with Fallin.Since 1996 the CAWGC has awardedmore than $85,000 in scholarships toarea students who are pursuing careersin the construction field. Next year’s form will be available

after February 1, 2014.For more information, visit

www.contractorswillgrundy.org. (This story also can be found on



guide.com.)

William F. Sieczkowski III, a graduate of CarlSandburg High School, will be attending University ofIllinois at Urbana-Champaign and will be majoring incivil engineering.

Alissa M. Alberico, a graduate of Providence CatholicHigh School, will be attending Georgia Institute ofTechnology and majoring in engineering.

Kevin F. Filotto, a graduate of Joliet CatholicAcademy, will be a senior at Illinois State Universityand majoring in construction management.

Paige C. Dickison of Gardner, who was home-schooled, will be a freshman at Joliet Junior College.


ROLAND MACHINERY CO.www.rolandmachinery.com816 N. Dirksen Parkway,Springfield, IL 62702217/789-7711Bolingbrook, IL630/739-7474Carterville, IL618/985-3399Marengo, IL815/923-4966Portage, IN219/764-8080Escanaba, MI906/786-6920906/786-5813 Fax Bridgeton, MO314/291-1330Cape Girardeau, MO573/334-5252Columbia, MO573/814-0083Palmyra, MO573/769-2056DePere, WI920/532-0165920/532-0526 Fax DeForest, WI608/842-4151608/842-4193 Fax Eau Claire, WI715/874-5400715/874-5401 Fax Franksville WI 262/835-2710262/835-2844 Fax Schofield, WI715/355-9898715/241-0044 Fax

GENERAL EQUIPMENT & SUPPLIESwww.genequip.com4300 W Main AveFargo ND 58103800/437-2924701/364-2190 Fax 905 20th Avenue SEMinot ND 58072800/825-04792300 Vermont AvenueBismarck ND 58504800/279-4437


A V A I L A B L E N O W A T

STAR EQUIPMENT LTD.1401 2nd AvEnUE

dES moInES, IA 50314(515) 283-2215

FAx: (515) 283-0295(800) 369-2215

2625 w. AIRlInE hwy.wATERloo, IA 50703

(319) 236-6830FAx: (319) 236-6834

(800) 791-9249

2950 6Th STREET SwcEdAR RAPIdS, IA 52404

(319) 365-5139FAx: (319) 365-6726

(800) 728-5139

2100 E. lIncoln wAy

AmES, IA 50010(515) 233-9500

FAx: (515) 233-9505(866) 856-2312

HARDINGS HEAVYEQUIPMENT

109 w. commERcIAl AvEnUE

lowEll, In 46356(219) 696-8911

FAx: (219) 696-8915www.hARdIngSInc.com

STARE Q U I P M E N T

LT D .

www.STAREQUIP.com


Powering Your Productivity...For Over A Century

Portable Power

©2013 Doosan Infracore Portable PowerFind Us on DoosanPortablePower.com (800) 633-5206 Follow Us on

Aspen Equipment Co.

9150 Pillsbury Ave. SBloomington, MN 55420

(952) 888-2525

McAllisterEquipment Co.

150 E. North Ave.Villa Park, IL 60181

(630) 530-7600Alsip/Chicago, IL(708) 389-7700

E. Peoria, IL(309) 694-4455

Rockford, IL(815) 227-0555Springfield, IL

(217) 789-0351

4670 Crossroads Industrial DriveBridgeton, MO

(314) 291-1330Cape Girardeau, MO

(573) 334-5252Columbia, MO

(573) 814-0083Palmyra, MO

(573) 769-2056Carterville, IL

(618) 985-3399

DePere, WI(920) 532-0165

DeForest, WI(608) 842-4151

Eau Claire, WI(715) 874-5400Franksville, WI

(262) 835-2710Schofield, WI

(715) 355-9898Escanaba, MI

(906) 786-6920

9200 Liberty DriveLiberty, MO 60468

(816) 781-8070Springfield, MO(417) 865-0505

Wichita, KS(316) 943-1231

Great Bend, KS(620) 792-1361

Liberal, KS(620) 624-7274

Salina, KS(785) 825-8291

Colby, KS(785) 462-8211

Roland Machinery Co. Central Power Systems & Services


Coming next issue: ConExpo ’81 continues: Equipment Takes the Field in the Astrodome.

There were also several surprises.Probably the biggest surprise was the foreigninvasion of a new wave of Japanese andEuropean competitors moving in to stake outa position in the already crowded NorthAmerican marketplace. The newcomers,including such giants as Komatsu, Hitachi,and I.B.H. Holding, demonstrated their abil-ity to build extensive product lines; they arecertainly to be considered a serious threat byU.S. manufacturers.New technology, new lines and new ideas

abounded at ConExpo in January. Someequipment was bigger, more powerful and,at the same time, more fuel efficient thanprevious models. Other pieces of equipmentwere more compact, versatile and maneu-verable than before. And in some cases,manufacturers added new technology to oldstandards giving them new viability and pre-venting obsolescence.For those not interested in construction

equipment, ConExpo ’81 provided a widevariety of other activities. The daring couldride a gondola lifted by a giant FMC crane toan observation post a couple hundred feet offthe ground. Case set up a little theater and letpeople operate live equipment. Other manu-facturers had working models of their equip-ment, which the public could control. Evenhistory buffs could find some of the antiquemachines, which were revolutionary in theirtime, interesting. The antiques providedsome insight into how much constructionequipment has changed the way we live.Not all the equipment in ConExpo ’81

was brand new. Blaw-Knox went the otherway and displayed a restored 1930 paver, thefirst automatic asphalt paving machine inhistory. It was equipped with rollers for com-pacting the asphalt as it was laying it.

(This story also can be found onConstruction Equipment Guide’s Web siteat www.constructionequipmentguide.com.)CEG

ConExpo 1981 — AstrodomeComplex Hosts Huge Show

CONEXPO from page 33

PCA Projects Cement Usageto Increase 6.2 Percent in 2013Following the strongest cement consump-

tion gains in seven years in 2012, cementconsumption growth will continue in 2013with a 6.2 percent increase. According to thelatest forecast from the Portland CementAssociation (PCA), the majority of marketrecovery will occur in the second half of2013.“Recessions correct imbalances generated

during boom periods,” Ed Sullivan, PCAchief economist said. “Few economistsdoubt the generation of a large pent-updemand during the past several years. Thequestion is, when the economy will unleashits potential for strong growth?”The recession has created a pent-up

demand not just for consumer products butalso construction. For example, PCA expectshousing starts, to reach nearly 1 million in2013. Multifamily construction also contin-ues to grow at a strong pace and this trendshould continue as favorable fundamentalsfuel the sector. Multifamily starts recorded a55 percent gain in 2011 and 36 percentgrowth in 2012. PCA expects an additionalgrowth of 29 percent in 2013 to 318,000units.“Although nonresidential and residential

will be in full recovery in 2013, public con-

struction will act as a drag on cement con-sumption this year,” Sullivan said.“However, as the economy gains momen-tum in 2014, job gains will strengthen states’fiscal conditions and support stronger con-struction spending.”The accelerated consumption predicted

during the second half of 2013 should carryinto the following year. PCA projects anincrease of 9.2 percent for 2014.PCA also upwardly revised its long-range

projections for 2015 to 2017. Annual growthduring that period is expected to be as highas 11.1 percent. PCA predicts cement con-sumption levels will reach 120 million met-ric tons by 2017.

About PCAThe Portland Cement Association repre-

sents cement companies in the United Statesand Canada. It conducts market develop-ment, engineering, research, education andpublic affairs programs. For more information, visit

www.cement.org.(This story also can be found on



Industry Update...

Nearly Half of AGC Members Report Improved BusinessBy Len ToenjesPRESIDENT, AGC OF ST. LOUIS

In a new Contractor ConfidenceIndex (CCI) survey conducted bythe Associated GeneralContractors (AGC) ofSt. Louis, nearly half(44 percent) of its gener-al contracting membersreport that business con-ditions have improvedover the past sixmonths. At the sametime, 47 percent of therespondents report busi-ness has remained thesame while none of therespondents categorizedbusiness as much better.In fact, 9 percent feltconditions have worsened over thepast six months. The new onlinesurvey was completed on July 24.Looking forward, 53 percent of

the general contractor membersexpect business to remain about

the same over the next six monthswhile 31 percent expect it to getbetter. One percent believe condi-tions will be much better in sixmonths, while 6 percent see condi-tions getting worse. Six percent of

the respondents said they areunable to foresee conditions sixmonths from now. When asked to predict a full

year ahead, the general contractorsexpect conditions to be much bet-

ter (6 percent), better (34 percent),about the same (31 percent), worse(13 percent) or don’t know (16 per-cent). Looking 18 to 24 monthsahead, respondents reported amore favorable outcome: much

better (13 percent) better(41 percent) about the same(9 percent) worse (22 per-cent) don’t know (16 per-cent). Eighty-one percent of the

contractors reported that 0to 25 percent of their currentwork is on roads, bridges orother horizontal infrastruc-ture. Sixty-six percent ofthe contractors reported that75 to 100 percent of theircurrent work is in vertical(building) construction.

The construction industryemploys nearly 100,000 persons inthe state of Missouri and representsa significant economic impact forthe St. Louis metropolitan region.Our state continues to be chal-

lenged by a lack of new businessesmoving into the area as well as theMissouri state Legislature’s failureto address our state’s roads, bridgesand other transportation infrastruc-ture.In a separate report issued July

30, 2013, by the AGC of America,Missouri showed a 5 percent gainin construction employment fromthe same time last year (113,200 asof June 30, 2013, as comparedwith 108,300 on June 30, 2012).The St. Louis area showed a 5 per-cent gain (61,700 vs. 58,900),while Kansas City showed an 8percent loss (21,600 vs. 23,400)and Springfield, Mo., showed an 8percent gain (61,700 vs. 58,900.)St. Louis ranked 103rd in thenation in construction job recovery,with a gain of 2,800 jobs over thesame time last year. Our contractor members have

gone through some very challeng-ing times over the past five years.They are literally “in the trenches”

every day with business ownersand institutions investing in theirfacilities so we believe they are thebest barometer of “actual” busi-ness conditions in St. Louis.Missouri’s construction industry isslowly gaining ground, but it cer-tainly is not the robust recovery forwhich we all had hoped.St. Louis still has a lot of work to

move us all towards a vibranteconomy. Some other metropoli-tan areas are outpacing us, as indi-cated by construction employmentfigures from around the country.We hope our new CCI Index,which we plan to release quarterly,will be yet another tool to helpbusiness, government and institu-tional leaders plan for the future.We all want to see the state’s andthe region’s economy move for-ward.




mentguide.com.)

We hope our new CCI Index,which we plan to releasequarterly, will be yet anothertool to help business, government and institutionalleaders plan for the future.


Built from a lineage of market leaders for over 60+ years

ILLINOISBIRKEY'S CONST. EQUIPMENT

construction.birkeys.comGalesburg

(309) 341-4360Bloomington

(309) 827-0520Mattoon

(217) 235-3158Urbana

(217) 337-1781

DIAMOND EQUIPMENTwww.diamondequipment.com

Mt. Vernon(618) 242-2273Terre Haute

(812) 299-4747

ILLINOISWEST SIDE TRACTOR SALESwww.westsidetractorsales.com

Naperville(630) 355-7150

Rockdale(815) 730-9011

Rockford(815) 961-3160South Holland(708) 331-6362

Wauconda(847) 526-7700

MINNESOTAZIEGLER CAT

www.ZieglerCAT.comMinneapolis

(800) 352-2812Brainerd

(877) 829-9850Buhl

(800) 446-9795Columbus

(866) 982-5656Crookston

(800) 422-5782Duluth

(800) 421-3831Fergus Falls

(800) 346-7649Jackson

(866) 847-6401

MINNESOTAZIEGLER CATMarshall

(800) 325-4929North Mankato(877) 845-3938

Rochester(800) 247-1068

Shakopee(800) 352-2812

St. Cloud(800) 522-9469

WISCONSINMILLER-BRADFORD

& RISBERG INC.www.miller-bradford.com

Madison800-585-7219Eau Claire

800-585-7232DePere

800-638-7448Abbotsford

888-886-4410

INDIANADIAMOND EQUIPMENT

www.diamondequipment.comEvansville

(812) 425-4428

MACALLISTER MACHINERYSALES/RENTALS

www.macallister.comIndianapolis

(317) 545-2151Indianapolis

(317) 244-RENT (7368)Fort Wayne

(260) 483-6469 (heavy equip.)

(260) 969-3322 (rental store)Lafayette

(765) 449-8191 (heavy equipment)(765) 446-5600 (rental Store)

INDIANAMACALLISTER MACHINERY

SALES/RENTALSTerre Haute

(812) 478-3155(heavy equipment)

(812) 231-6000 (rental store)South Bend

(574) 288-6622Washington

(812) 254-1712Bicknell

(812) 735-0286Bloomington

(812) 349-9220Fishers

(317) 598-9700Greensburg

(812) 663-5829Richmond

(765) 966-0626Yorktown

(765) 759-2CAT (2228)

IOWAZIEGLER CAT

Altoona800-342-7002

Atlantic877-547-3819Sioux City

712-252-4401Fort Dodge

800-342-1848Mason City

800-342-1849Postville

800-526-0889

KENTUCKYDIAMOND EQUIPMENT

www.diamondequipment.comBowling Green(270) 781-1061

OHIO CATwww.OhioCAT.com

Richwood(888) 446-4658

WILSON EQUIPMENT CO.www.wilsonequipment.com

Corbin(606) 528-0700

Lexington(859) 254-6443Prestonsburg(606) 874-8036

MICHIGANMILLER-BRADFORD

& RISBERG, INC.www.miller-bradford.com

Negaunee800-562-9770

OHIOOHIO CAT

www.OhioCAT.comBroadview Heights(800) 837-6200Sharonville

(888) 332-4658 (Sales & Service)

(888) RENT-441 (Rental)Columbus

(888) 441-4658 (Sales & Service)(888) RENT-441 (Rental)

Perrysburg(888) 339-4658 (Sales & Service)

(888) RENT-441 (Rental)

OHIOOHIO CAT

Troy(888) 330-4658Youngstown

(800) 837-6203Cadiz

(800) 837-6204Canton

(800) 837-6207Zanesville

(800) 837-6205N. Canton

(888) 736-8443Oakwood Village(800) 633-1020


Authorized Doosan Dealers

ILLINOISLuby Equipment

Quincy217-222-5454

www.lubyequipment.com

INDIANARonson Equipment Co., LLC

Lowell219-696-5680 • 866-350-5538

www.ronsonequipment.com

IOWABrown’s Heavy Equipment, Inc.

Ames515-232-8456 • 800-723-5460

www.brownsheavyequipment.com

RTL Equipment, Inc.Grimes

515-986-0262 • 800-373-3916Swisher

319-857-4045www.rtlequipment.com

MICHIGANCarleton Equipment Company, Inc.

Kalamazoo269-343-2943 • 888-380-6420

Byron Center616-877-3388Chester�eld

586-463-3833Livonia

734-421-9999Saginaw

989-777-6666www.carletonequipment.com

Midway Rentals and SalesNegaunee

906-228-4200www.mrmqt.com

MINNESOTALano Equipment, Inc.

Shakopee952-445-6310 • 877-753-6100

www.lanoequip.com

MISSOURIBobcat of St. Louis

Valley Park636-225-2900 • 800-782-0854

Columbia573-886-9435 • 866-607-9435

www.bobcatofstl.com

Custom Truck & Equipment, LLCKansas City

816-241-4888 • 800-861-1065www.customtruckandequipment.com

Luby EquipmentCape Girardeau

573-334-9937www.lubyequipment.com

NEBRASKABobcat of Omaha

Omaha402-895-6660 • 888-732-3198

doosan.omaha-tractor.com

NORTH DAKOTABobcat of Devils Lake

Devils Lake701-662-5331

www.bobcatofgrandforks.com

Bobcat of Grand Forks, Inc.Grand Forks

701-772-5006 • 877-863-2362www.bobcatofgrandforks.com

Bobcat of WillistonWilliston

701-572-5050www.bobcatofgrandforks.com

OHIOBobcat Enterprises, Inc.

Hilliard614-876-1116 • 888-290-2130

Cincinnati513-874-8945 • 888-290-2130

www.bobcat-ent.com

SOUTH DAKOTADiesel Machinery, Inc.

Sioux Falls605-336-0411 • 800-456-4005

Rapid City605-348-7438 • 800-658-3047

Aberdeen605-725-4364 • 888-762-6312

www.dieselmachinery.com

WISCONSINSwiderski Equipment, Inc.

Mosinee715-693-3015

Wausau715-675-2391

Thorp715-669-5255

Antigo715-623-4668

Waupaca715-258-3266

www.swiderskiequipment.com

oo DdzeirohtAu

sreal Denaso

865-696-912Luq EonsRon

IN

ybu.lwww-712Q Eyy EbyuL

ILL

8355-053-66 8 •08llweoL

CLL,.o C CotnmepiuANAID

moc.tnempquiey4545-222-

ycinuQtnemquip E

SINOIILL

eona.lwww •1036-544-259okhaSmquip EoanL

ENNIM

mrm.www822-690

augeNaltne Rayy RwdiM

moc.pquie01063-57-77 8

eepo.cn I,tnem

ATTAOSE

omc.tqm0024-8

eneausealSdn asal

OIOH

dnargftoacbob.www505-275-017

notsilliWilWf oatcboBdnargftoacbob.www776 • 8005-277-107kro FandrG

d FnarGf t oacbBo

moc.skrofd05

nnotislil

moc.skrofd2632-368-7

sk.cn, Iskrod F

620689515G

quip ELTRhsnwor.bwww548-232-515

vaave Hs’nwroBI

osno.rwww865696912

619337300 8 •26semirG

.cn I,tnemquipmoc.ntempiuqyeaveh

0645-327-006 • 8smeA

.cn I,tnemquip Eyy EvWAO

moc.tnepmiuqneo835505366 808

saansK E & & Euckk &r T TrmotsuCacobb.www

•5349-688-375umolC •009-252-2636yellVaf t oacbBoOUSSIM

yti CsCLL,tnemquip E

omc.ltsfot5349-706-66 8

aibum4580-287-00 8

kra PsiuoL. tS

IROU

lal FxuoSieincha Mll MeseiDKADHTUOS

ne-tacobb.www88 8 •5498-478-315tanincinC

88 8 •61116-78-416diarlliHirpretnt EacbBo

s.cn I,yy,re

ATTAOK

omc.t3012-092-8

it3012-092-

.cn, Ises

616royB492-343-962

Kaquip EnotelarC

ICHM

eltr.www-913

Sw620-689-515

8833787retnen Cro

0246-038- 888 •34ooazmal

.cn I,yy,anpmo CtnemNAGIICH

moc.tnempquie540-4785-

rehsiSw6193-373-00 8 •26

ahmOf t oacbBoARBEN

quieybu.lwww433-375ri GepaC

quip Eyy EbuLnakcurtmtosuc.www

•88841-42-618saansK

aahahamOf

AKSA

moc.tnempqui3799-4

uadeuip

arrtnem

d

moc.tnempquiden5061-168-00 8

yti Cs

eesinoMmpiuq EikrseidwSSNOCSIW

nihcamlesdie.www88 8 •4634-52-7506needrebA00 8 •8347-348-506y CitdipaR

00 8 •1140-633-506lal FxuoSi

.cn I,ntemNIS

moc.yren2136-26-78

n7403-85-60

y5040-654-0

s

toelrac.www989S

-437L68 5eCh-616

moc.tnempquiento6666-777-wainga

9999-124-ianoviL

8333-364-dl�eretse8833-787-

gftoacbob.www266-107

sliveDDf t oacbBoDHTRON

ahmao.nasood •0666-5982-04ahmO

moc.skrofdnar3135-2

kea LekaLs live

ATTAOKAD

moc.rtoacrt-a89132-37-88 8 •

aah

piuqieksreidws.www623-8525-17aacaupW664-3265-17

oigntA25-9665-17

phorT9325-765-17

ausauW30-3965-17

eesinoM

moc.tnemp66

a86

55

19

51

piuqieksreidws.www

moc.tnemp


Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2013 Doosan Infracore Construction Equipment America. All rights reserved. | 0813892

There’s only one way to make it to the top in this business. Hold her steady and never stop moving. Doosan ADTs have a front-mounted turning ring, unique sloping frame and free-swinging rear tandem bogie suspension that bring excellent stability and traction on rough, uneven ground. Doosan wheel loaders have tremendous li� capacity and fast cycle times to power through di�cult jobs without slowing down. Keep moving and stay on top with Doosan.

If you stop moving, you’ll never make it

TO THE TOP.

Visit your local Doosan dealer to learn more. Scan the code or visit doosanequipment.com/dealer to �nd a dealer near you.

Doosan Delivers



THE STRONG, SILENT TYPE.

Featuring an ultra-quiet,redesigned operator station,the 755K Crawler Loader quiet-ly goes about its business, let-ting its impressive perform-ance do the talking. Moreweight, power, hydraulic flow,bucket capacity, and breakoutforce significantly boost pro-ductivity. Customer-inspiredenhancements include morecontrol options, from V-patternwith steering pedals to joystickFNR. An innovative on-demandcooling system with optionalhydraulic reversing fan. Andquicker daily checks and lessfrequent periodic maintenance.Plus its IT4 diesel meets rigidemission standards, so youcan work the 755K whereverthere’s work, even in nonattain-ment areas. It’s the perfectmachine for those who preferless talk and more action.

Saginaw4600 AIS DriveP.O. Box 253

Bridgeport, MI 48722989/777-0090

Fax: 989/777-1583

Grand Rapids600 44th Street S.W.Grand Rapids, MI

49548616/538-2400

Fax: 616/538-0449

Northeast Detroit65809 Gratiot AveLenox, MI 48050

586/727-7502Fax: 586/727-7311

West Detroit56555 Pontiac TrailNew Hudson, MI

48165 248/437-8121

1-800/457-8121

Traverse City8300 M-72 EastWilliamsburg, MI

49690231/267-5060

Fax: 231/267-5257

Naperville, IL 60563630/355-7150

Fax: 630/355-7173

Rockdale, IL 60436815/730-9011

1-800/937-3355Fax: 815/730-9036

Rockford, IL 60012815/961-3160

Fax: 815/965-1810

South Holland, IL60473

708/331-6362Fax: 708/331-7334

Wauconda, IL 60084847/526-7700

Fax: 847/526-3565

Bloomington, IN 47403812/333-9677

Fax: 812/333-9731

Fort Wayne, IN 46825260/482-8576

Fax: 260/483-4057

Indianapolis, IN 46219317/544-3411

Fax: 317/544-3420

Lafayette, IN 47905765/447-6933

Fax: 765/448-9038

South Bend, IN 46619574/232-1461

Fax: 574/233-3324

Des Moines, IA800/822-2212

Fort Dodge, IA800/362-2487

Sioux City, IA800/352-4693

Waterloo, IA800/772-2019

Dodge City, KS800/794-0172

Great Bend, KS800/264-4056

Park City, KS800/262-0139

Topeka, KS800/279-6087

Ulysses, KS800/472-9238

Kansas City, MO888/306-3434

Springfield, MO888/306-2656

Gering, NE800/205-6784

Grand Island, NE800/868-4017

Lincoln, NE800/416-5518

North Platte, NE800/894-7060

Omaha, NE800/416-5095

Brunswick, OH800/716-9796

Cambridge, OH 740/439-2747

Canton, OH866/235-0438

Chillicothe, OH 740/663-5300

Cincinnati, OH800/844-3734

Columbus, OH800/222-2010

Lima, OH800/423-7445

Painesville, OH866/800-1398

Poland(Youngstown), OH

866/503-7259

Vandalia (Dayton),OH

800/233-4228

Cranberry Twp, PA724/776-3636

Delmont, PA724/837-4500

Ashland, WI715/682-5522

Chippewa Falls, WI715/834-2924

Monico, WI715/487-5583

Mosinee, WI715/693-3820

Duluth, MN218/722-7456

Bemidji, MN218/759-1996

Grand Rapids, MN218/326-9427

Escanaba, MI906/789-9054

Louisville, KY502/253-3721

Richmond, KY859/623-2030

Bowling Green, KY270/842-3400

London, KY606/862-8447

www.westsidetractorsales.com www.murphytractor.com

,

D

2

a

E

,


Volvo Penta Tier IVf Engine Uses SCR to Reduce EmissionsSince the 1990s, when the

United States, Japan and theEuropean Union passed legisla-tion regulating the exhaustemissions from off-road vehi-cles, a revolution has beenunder way in engine technolo-gy, yielding a range of excitingnew engine designs and inno-vations. The laws have comeinto effect over the years in evermore stringent phases, called“tiers” in the United States and“stages” in Europe. In 2014, thelegislation will enter its latest,most rigorous phase: from Jan.1, all off-road engines with out-put over 75 kW (in the UnitedStates) and 130 kW (in the EU)will have to meet Tier IVFinal/Stage IV requirements,which reduce NOx and PMemissions by 99 percent overpre-legislation levels.But not all Tier IVf engines

are created equal. While thereare several ways an engine canbe configured to meet Tier IVfemissions levels, Volvo Pentahas created a new line of pow-erful low-maintenance, low-emissions engines that’s set to hit the marketin 2014.

Why Lower Emissions?The legislation regulates several kinds of

harmful exhaust emissions, including nitrousoxides (NOx) and particulate matter (PM).The importance of lowering NOx and PMlevels cannot be understated. Particulatematter presents itself as black soot andsmoke; besides creating an unpleasant odor,it can cause lung irritation and, in somecases, cancer and heart disease. Nitrousoxide, on the other hand, is responsible forcreating acid rain, as well as producingground-level ozone and smog.

The Emissions ParadoxBut in the process of eliminating these

two harmful substances, there’s an unfortu-nate tradeoff: whenever NOx is decreased,PM will increase, while if PM levels arelowered, NOx levels will rise.To meet each phase of the legislation,

Volvo Penta has configured its base enginesto emit very low levels of PM. However, dueto a high combustion temperature, theseengines produce NOx if they’re not furtheraltered in some way. And NOx emissions arein sharp focus in the Tier IV Final phase:while Tier IV Interim had drasticallyreduced both NOx and PM from Tier III lev-els, Tier IVf required NOx levels to dropeven further, from 2.0 g/kWh to 0.4 g/kWh

— a massive 80 percent reduc-tion. The solution was to improve

the selective catalytic reduction(SCR) technology that VolvoPenta had already implemented inits Tier IVi engine generation.With SCR technology, AdBlue isinjected into the exhaust line andreacts with NOx in the catalyticconverter to turn the harmfulcompound into nitrogen andwater. Another crucial part ofVolvo Penta’s Tier IVf solution is lightexhaust gas recirculation (light EGR).Because NOx is created at very high tem-peratures, the EGR further contributes toreducing NOx by lowering the peak com-bustion temperature.

How It’s DifferentMany of Volvo Penta’s competitors have

attacked the problem from another angle,configuring their base engines’ combustionrate to produce low levels of NOx but emithigh levels of PM. Their solution is to add adiesel particulate filter (DPF), which cap-tures the soot and periodically incinerates itdown to harmless ash in a process calledregeneration. Though effective, thisapproach has its own drawbacks, includinghigher fuel consumption. Furthermore, aDPF requires costly maintenance and mustbe replaced regularly. Overall, a DPF system

requires many extra parts — from air pumpsand compressors to ignition coils — all ofwhich can fail or need replacing. While most engine manufacturers

installed a DPF to meet Tier IVi and SCR tomeet Tier IVf regulations, Volvo Penta usesjust SCR in its Tier IVf engines — a simpler,more straightforward solution for customers,with fewer parts and less maintenance than aDPF, according to the manufacturer. “Because we believed that reducing NOx

and PM emissions to Tier IVf levels could beachieved with just SCR, we put all our effortinto improving that technology — and mak-ing sure we didn’t need to use a DPF, whichcan end up being more hassle for cus-tomers,” said David Hanngren, manager ofindustrial product planning at Volvo Penta.“It would have been far easier for us to use aDPF, which was already an existing technol-ogy. And ultimately our competitors’

engines with DPFs emit thesame low levels of PM andNOx as ours do. But becausethey’re configured to perform atoptimum levels, burn less fueland produce very little smoke,our Tier IVf engines have endedup being a much better solu-tion.”Though Tier IV Final is

major step forward, the processof lowering emissions in off-road engines isn’t over yet —there are more stringent regula-tions in the pipeline for years tocome.

Volvo Penta Tier IVFinal Engines

Volvo Penta’s range of fivenew Tier IVf engine platformswill be available for delivery in2014. The engines share a com-mon design concept, makinginstallation easy and intuitivefor OEMs that use multipleengine sizes in their prod-ucts.• Five liters: The

TAD570/71/72VE, a 4-cylinder, 105 to 160 kWengine with a max torque of900 Nm.

• Eight liters: TheTAD870/71/72/73VE, a 6-cylinder, 160 to 235 kWengine with a max torque of1,300 Nm.

• Eleven liters: TheTAD1170/71//72VE, a 6-cylinder, 235 to 285 kWengine with a max torque of1,950 Nm.

• Thirteen liters: TheTAD1371/72/73/74/75VE, a 6-cylinder, 285to 405 kW engine with a max torque of2,650 Nm.

• Sixteen liters: The TAD1670/71/72VE,a 6-cylinder, 405 to 515 kW engine with amax torque of 3,200 Nm.Volvo Penta also will introduce a bi-fuel

engine for power generation, powered bynatural gas and diesel fuel and tailored toapplications in the oil and gas explorationmarkets.

Sixteen liters: The TWG1663GE, a 6-cylinder, 60 Hz/1800 rpm (with fan) engine.Prime power: 595 kWm/559 kWe/699 kVa.Standby: 654 kWm/615 kWe/768 kVa.Generator efficiency: 94 percent.For more information, visit

www.volvopenta.com.(This story also can be found on



Volvo Penta has created a new line of pow-erful low-maintenance, low-emissionsengines that’s set to hit the market in 2014.

With SCR technology, AdBlue is injected into the exhaust lineand reacts with NOx in the catalytic converter to turn the harm-ful compound into nitrogen and water.

“They’re good for the environ-ment and they’re easy on thebudget.”That’s how Constantino

Lannes, president of SennebogenLLC defined the most recentround of design updates featuredin the new 830, 835 and 840model material handlers intro-duced recently to the NorthAmerican market.“E-Series Sennebogen material

handlers mark the beginning of anew generation of machines build-ing on fuel-saving and environ-mentally-friendly efficienciesthroughout their power train andhydraulic system. The result is aline-up of Tier IV-compliantmachines that also reduce operat-ing costs.”The Sennebogen purpose-built

material handlers are engineeredfor continuous use in demandingapplications such as scrap recy-cling and demolition, ports facili-ties and log handling. Introducedby Sennebogen as the “GreenEfficiency” models, the E-Seriesbuilds on Sennebogen’s estab-lished standards for performancewith low fuel consumption, opera-tor comfort and maximum safety,according to the manufacturer.

Efficient Power TechnologyA key feature of the “Green

Efficiency” design is the “Eco-Mode” and no-load automatic stopfunction. The “Eco-Mode” settingcombines reduced engine speedwith an automatic idle control anda start-stop system that will effec-tively reduce fuel consumption. Due to a new intercooler design

with direct mechanical drive, theE-Series fan system delivers maxi-mum air supply right from thestart. With an additional tempera-ture-dependant oil and water cool-er, the system’s materials and com-ponents all reach their operatingtemperature quickly and uniform-

ly, which in turn reduces overallenergy demand.

Minimum BackgroundNoise, Even at Full LoadOn all models, Cummins

engines provide ample reservepower, even under high loads, set-ting new standards for low noiseemissions. With reinforced cabwindows and insulated soundtransmission paths, sound pressurein the operator’s cab measures 4dB lower — a noise reduction ofmore than half. In all models, NOx(nitrogen oxide) emissions havebeen halved by the E-Seriesexhaust aftertreatment system andparticulate matter has been reducedby 90 percent.As well, the 830, 835 and 840

are still offered in electric-drivemodels, which can reduce operat-ing costs by up to 50 percent more

when compared to diesel drives.Powered by 100 percent emission-free electric motors, these cleanelectric-drive material handlersoffer low noise, vibration freeoperation for an even more com-fortable operator environment,according to the manufacturer.

A Diverse Range ofEquipment and “GreenEfficiency” TechnologyNumerous component options

and engineering configurationsmake the new E-Series models theideal material handling machinesin the scrap yard, at the port or inforestry applications.With new slewing drive systems

for rapid duty cycles plus extreme-ly robust hydraulic cylinders, E-Series machines are tailored to takeon the toughest material handlingtasks.The elevating maXCab comfort

cab offers enhanced visibility andoperator ergonomics. Its distinctivesliding door with entry step andhandrail, featured as standard on E-Series, provides safe access to theoperator station. The SENCONcontrol system and an array ofperiphery cameras help the opera-tor to operate safely, even in con-

gested and busy work zones. The E-Series models also make

maintenance and servicing taskseasy. Centrally accessible servicepoints and simple, computer-freeengineering save time and effort ineveryday operation while increas-ing uptime through every servicecycle.

With a wide range of mobilitychoices such as the rubber-tiredundercarriage or wide trackcrawler and several optional boomand stick configurations, theSennebogen E-Series modelsadapt easily to any task where largequantities of material have to bemoved quickly and consistently.For more information, call

704/347-4910 or visit www.sen-nebogen-na.com.




mentguide.com.)

E-Series Called ‘Good for the Environment, Easy on Budget’

Pages 61-77

Crushing, Screening & Recycling SectionFor more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

The elevating maXCab and 49 ft. 2 in.(15 m) cantilever arm render the Sennebogen 830 E-Series par-ticularly flexible and safe.

The Sennebogen 835 E-Seriesshows its strengths indemanding continuous use atthe scrap yard.

Page 62 • September 14, 2013 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Peninsula Equipment, ZB Group Offer New Metal ShredderZB Group, in conjunction with

Peninsula Equipment, is offering aportable track-mounted, true ham-mer-mill style metal shredder. Inaddition, Peninsula also willbecame a master distributor of theZB product line in the UnitedStates and Canada. Based in Spain, ZB Group has

earned a lasting reputation on pro-ducing portable and stationaryhammer-mills for more than 20years in various locations through-out the world. Designed to com-plement the distinctive line ofPeninsula product offerings in theUnited States and Canada, thisventure represents a new frontierfor both companies in exploringnew service territories. Ranging in rotor lengths from

39 to 82 in. (99 to 208 cm), fivehammer-mill metal shredder mod-els will be introduced, ranging inhorsepower from 440 to 2,000(328 to 1,491 kW). The firstmachine to make its debut in theUnited States will be the Thor1519K. This model will feature a60 in. (152 cm) hammer-mill pow-

ered by a Cat C-18 765 hp (570kW) engine.“This machine is aimed at the

small to medium scrap yard thatwants to take control and bring

processing in house. This truehammer mill design affords theowner the opportunity to sizereduce and densify,” said BillPadula, vice president of

Peninsula Equipment. “Throughthis partnership, ZB Group bringsto Peninsula a time-tested productline specifically aimed at the needsof a changing scrap market.”

These same products also excelat processing aggregate and recy-cled concrete, as well as construc-tion and demolition debris. Thescrap ramp and compression rollerhas been replaced with a “grizzly”bar and a fines conveyor.Parts and service for the

machines will be offered byPeninsula Equipment and stockedin Buford, Ga.; Lakeland, Fla.; andLexington, S.C. In time, regionaldistributors will be assigned toassist in product distribution.

About Peninsula Peninsula serves industries such

as C&D, wood waste, mulch,MSW, rock, concrete, demo andscrap. The company’s completeline of products includes crushing,grinding and screening equipment,which fits most unique applicationneeds. Product manufacturersinclude Metso, McCloskey, ZB,Thor, Peterson and Doppstadt.



Web site at www.construc-

tionequipmentguide.com.)

ZB Group, in conjunction with Peninsula Equipment, isoffering a portable track-mounted, true hammer-mill

style metal shredder.

Allen Tennis Joins FAE USA FAE USA Inc. based in Flowery Branch,

Ga., recently announced the addition ofAllen Tennis to its staff as its newestMidwest territory manager responsible forthe following states: Missouri, Kansas,Nebraska, South Dakota, North Dakota,Iowa, Minnesota, Wisconsin, Michigan,Ohio, Indiana, and lllinois. Tennis has been in the construction indus-

try for almost 10 years, most recently withCustom Truck and Equipment as a territorysales manager. Covering a broad territory,Tennis is based in southwestern Missouri.When asked about joining the company,

Tennis said that having the opportunity towork with a quality product line ultimatelybrought him to FAE. In simple terms, Tennissaid “you enjoy your work and are more suc-cessful when you know that what you areoffering are the best products.”Tennis has a rather diverse background,

which actually started in state and federallaw enforcement and eventually lead him tosales, marketing and advertising in the con-struction and construction equipment busi-ness.“I feel as if everything I have accom-

plished in the past has guided and preparedme for this position at FAE USA,” saidTennis.

For more information, call 678/502-9499or visit www.faeusa.com




FAE USA Inc. based in Flowery Branch,Ga., recently announced the addition ofAllen Tennis to its staff as its newestMidwest territory manager responsiblefor the following states: Missouri,Kansas, Nebraska, South Dakota, NorthDakota, Iowa, Minnesota, Wisconsin,Michigan, Ohio, Indiana, and lllinois.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • September 14, 2013 • Page 63

www.superior-ind.com

KING OF THE HILL

At Superior, we’re constantly searching for new ways to use our knowledge of bulk material handling systems to solve challenges and improve production. We’re driven by curiosity, loaded with determi-nation and energized by progress. How can we help you?

Proud partners of General Equipment & Supplies

Fargo, ND4300 Main Ave.Fargo, ND 58103800-437-2924Local: 701-282-2662Fax: 701-364-2190

Sioux Falls, SD3902 N Jessica Ave.Sioux Falls, SD 57104Local: 605-336-9000Fax: 605-336-0073

Bismarck, ND2300 Vermont Ave.Bismarck, ND 58504800-279-4437Local: 701-223-9700Fax: 701-223-4815

Shakopee, MN4600 Valley Industrial Blvd SShakopee, MN 55379800-966-1455Local: 952-224-1500Fax: 952-224-1570

Minot, ND905 20th Ave. SEMinot, ND 58701800-825-0479Local: 701-852-0479Fax: 701-852-1451

Official dealer partner of Superior Industries in North Dakota, South Dakota, Minnesota, Iowa & Nebraska

Everything you need to finish the job

Atlas Copco’s popular XAS 185 HardHat™ portable air compressor features a revo-lutionary polyethylene canopy design—the toughest in the industry. It will not rust, dent, corrode or fade and it resists extremes in temperature. The canopy protects the compressor from worksite damage, reducing your cost of ownership.

Most efficient air end in the compressor industryGuaranteed 185 CFMAward-winning designReliable source of compressed air to drive pneumatic tools such as the Atlas Copco TEX P60 or P90 pneumatic breakers

Call today to learn more!

800-732-6762www.atlascopco.us

See us at the ICUEE Show — Booth #K360


New 2013 Cedarapids MVP380Xclosed circuit plant on a Masabaquad chassis.

Run-on jacks, 6x20 triple deck screen, crossconveyor. Available July 1, 2013.

Price without switchgear: $749,694.00

2005 Powerscreen 600portable screen plant.

Three hydraulic folding conveyors,4x8 twin deck screen, 1645 hours.

Price: $89,550.00

2012 Portablewash plant rentalreturn.

Twin 36 Eagle over a6x16 Cedarapidstriple-deck screen.

Price withoutswitchgear: $179,000.00

2001 Cedarapids54II cone crusherwith new bonnetassembly/V-seat.

Comes with motorsheave, ready tocrush.

Price: $192,000.00

New 2012Terex RoadBuildingMS2 pickupmachine.

Price:$132,500.00

Rent it for:$8500.00/month



IROCK Crushers isexpanding its screeningplant lineup with its largesttrack screener, the TS-620scalping screen. The unit isone in a line of five IROCKtracked screener/scalpers.

The unit expands thebreadth of IROCK’s lineupand allows IROCK to serveany customer, from smallcontractors to larger produc-ers. The TS-620 is ideal forlarge-scale operations look-

ing for high output in heavy-duty scalping applicationssuch as quarrying, recycling,construction and demolition.Featuring a heavy-duty,

robust overall design, theTS-620 is powered by a

225-hp (168 kW) CaterpillarC6.6 engine and is capableof processing materials at arate of up to 900 tph (816 t). Allowing high production

rates, the TS-620 features aheavy-duty hopper rated to11.7-cu.-yds. (8.9 cu m), thehighest capacity available inits class. This direct-feedunit also features conveyorswith stockpiling heights upto 16 ft. (4.8 m). The TS-620 also has a

large screening area furthercontributing to themachine’s high output rat-ings. With a 20 by 6-ft. (6 by1.8 m) top deck and a 19 by6-ft. (5.8 by 1.8) bottomdeck, the machine has a totalscreening area of 234 sq. ft.(21.7 sq m). This two-deckdesign enables the produc-tion and sorting of up tothree different size products.In addition, the decks areinterchangeable for morecontrol over end-productsize.IROCK also offers one of

the widest discharge con-veyors in the market, offer-ing a 63-in. (160 cm) wideover size conveyor with animpact bed in comparison tothe industry standard 48-in.(122 cm). Optional components fur-

ther enhance the machine’sdurability. An apron feedercan be substituted for the

belt feeder for improvedlongevity in more ruggedenvironments. Top deckbofar bars allow producersto retain more valuable finematerial while rejectingunwanted oversize products.Top-deck punch plates areanother option that prolongsscreen life in scalping orheavy-duty screening appli-cations.Several additional options

allow for easy maintenanceand portability. While theTS-620 comes standard withan attached cord and remotefor controlling and maneu-vering the screener around ajob site, a wireless remoteoption also is available.Walkways alongside thescreeners provide full accessto each side of the screenboxfor ease of maintenance orscreen changeouts. Further,walkways can be foldedhydraulically for smooth setup and transportation.IROCK has convenient

24-hour online parts look upand ordering, fast delivery,and live service support until9 p.m. EST.For more information,

call 866/240-0201 or visitwww.irockcrushers.com.

(This story also can be

found on Construction

Equipment Guide’s Web site

at www.constructionequip-

mentguide.com.)

IROCK Crushers IntroducesNew TS-620 Scalping Screen

Featuring a heavy-duty, robust overall design, the TS-620 is powered by a 225-hp (168 kW) Caterpillar C6.6engine and is capable of processing materials at a rateof up to 900 tph (816 t).


Lokotrack LT1213 impactor plant

Lokotrack LT1213

Top capacity impactor plantMore versatility,more opportunities for you.

op

otrack LokLy and unifcapacit

e lookr’ouf yI

capTTop capacit

or plant frty impacimarT1213 prk L LT1213 pr

, taktsoducm end pror and unif foror a combination of ing f o e look

ty impacop capacitokL

. etsoom Mor plant fr

e a look at the , takeased crushing or a combination of incr

tor plantT1213otrack L LT1213ok

T

E-mail: minerals

or tibutdistrabout the v

offorop pertmineral-based demolition debr

ith a single LWmethod that also incr

T121 he L LT1213 offT

.com.nam@metsoE-mail: minerals

.yodaor tour local Mt yT1213, contacersatile L LT1213, contacabout the v

t qualitoducmance and end pror, all while maintaining ismineral-based demolition debr

ou can crush both rT1213, y ngle L LT1213, your business opporeases ymethod that also incr

e impactivoduce prers a mor13 off fers a mory impac

etso our local Me n moro learTTo lear. yt qualit

, all while maintaining y ock and anou can crush both r

. tunitiesour business opport crushing e impac

.metsowww

om.c.metso

BUTLER MACHINERY CO.www.butlermachinery.com

3402 36th St. SWFargo, ND 58014

701-280-3100

800-726-7475

3630 Miriam Ave.Bismarck, ND 58501

701-223-0890

2803 I-94 BusinessLoop E

Dickinson, ND 58601701-456-1400

1201 S. 46th St.Grand Forks, ND 58201

701-775-4238

1505 Hwy 2, Bypass EMinot, ND 58701

701-852-3508

4950 E Highway 12Aberdeen SD 57401

605-225-6240

3601 Deadwood Ave. NRapid City, SD 57702

605-342-4850

20571 Truck Stop Ave.Pierre, SD 57501

605-224-5400

3201 N. Louise Ave.Sioux Falls, SD 57107

605-336-3010

RB SCOTT COMPANY INC.

www.rbscott.com1011 Short St.

Eau Claire, WI 54701715-832-9792

Fax: 715-832-7767

CENTRAL SERVICE &

SUPPLY, INC.www.centralsands.com

4219 E. 50th St.Des Moines, IA 50317

800-247-2400

515-964-8600

Fax: 515-309-0667

PROCESSMACHINERY INC.www.processmachinery.com

1636 Isaac Shelby DriveShelbyville, KY 40065

800-860-1523

860 Kaderly DriveColumbus, OH 43228

866-249-4330

ROAD BUILDERSMACHINERY &

SUPPLY CO., INC.www.roadbuilders

machinery.com

1001 S. 7th St. TrafficwayKansas City, KS 66105

913-371-3822

Fax: 913-371-3870

4115 S. 90th St.Omaha, NE

402-331-9200

5601 Fletcher Ave.Lincoln, NE

402-325-0447

4949 Juergen Rd.Grand Island, NE

308-384-2620

AIS CONSTRUCTION

EQUIPMENTCORP.

3600 N. Grand River Ave.Lansing, MI 48906

517-321-8000

Fax: 517-321-4191

www.aisequip.com

Grand Rapids600 44th Street S.W.

Grand Rapids, MI 49548616-538-2400

Fax: 616-538-0449

Northeast Detroit65809 Gratiot Avenue

Lenox, MI 48050586-727-7502

Fax: 586-727-7311


Bridgeport, MI 48722989-777-0090

Fax: 989-777-1583

Traverse City8300 M-72 East

Williamsburg, MI 49690231-267-5060

Fax: 231-267-5257

West Detroit, MI56555 Pontiac Trail

New Hudson, MI 48165248-437-8121

800-457-8121


Brandeis Machinery & Supply Co.www.brandeismachinery.com

Evansville, IN • (812) 425-4491Ft. Wayne, IN • (260) 489- 4551Indianapolis, IN • (317) 872-8410Corbin, KY • (606) 528-3700

Lexington, KY • (859) 259-3456Louisville, KY • (502) 491-4000Paducah, KY • (270) 444-8390Stanville, KY • (606) 478-9201

28775 Beck Rd.Wixom, MI 48393(248) 449-6700

Fax: (248) 449-6701www.altaequipment.com

2470 W. Columbia Ave.Battle Creek, MI 49015

(269) 965-1269Fax: (269) 965-1881

8840 Byron Commerce SWByron Center, MI 49315

(616) 878-7450Fax: (616) 878-7650

4716 Talono Ct. S.E.Kentwood, MI 49512

(616) 698-2960Fax: (616) 698-2901

6327 Jomar Ct.Lansing, MI 48917(517) 272-5033

Fax: (517) 272-7257

5920 Grand Haven Rd.Muskegon, MI 49441

(231) 798-9754Fax: (231) 798-9387

28855 Smith Rd.Romulus, MI 48174(734) 641-8238

Fax: (734) 641-8334

1524 Champagne Dr.Saginaw, MI 48604(989) 752-9400

Fax: (989) 752-9834

7500 E. 15 Mile Rd.Sterling Hts., MI 48312

(586) 977-6000Fax: (586) 977-6099

476 US 31 SouthTraverse, MI 49685(231) 943-3700

Fax: (231) 943-8110

56195 Pontiac TrailNew Hudson, MI 48165

(248) 356-5200Fax: (248) 356-2029

9433 Riley St.Zeeland, MI 49464(616) 748-4108

Fax: (616) 748-4120

Alta Equipment Company

Powerscreen Warrior 1400X SavingTime, Money for Sutton ServicesThe Powerscreen Warrior 1400X

was launched in 2012 at Hillhead andsince then it has impressed customersaround the world. Sutton ServicesLimited is a customer of Powerscreendistributor, Powerscreen Midlands.Sutton Services is a family run businesswith more than 20 years of industryexperience specializing in demolition,site clearance, plant hire, recycling andsteel fabrication. It recently bought andinstalled its first Warrior 1400X in itsUK site.The machine is processing Arising’s

C&D waste from a recycling site inIpswich, UK. New features on theWarrior 1400X have already lead to anincrease in productivity and improvedfuel efficiency for Sutton. “We feel this machine is now way

ahead of anything else on the market.With the new screen media set up, wehave definitely seen a 25 to 30 percentreduction in the need for crushing. Thisdrives down our operational costswhile increasing our production ability.Compared to the previous machine wewere operating, we have seen a 10 per-cent reduction in set up and take downtime. There is also noise reductionmaking this a suitable machine to usein the middle of a city,” said GlennSutton, director.“We have recorded a vast improve-

ment in the middle grade quality, theycan send the mid-grade product straightto stockpile as these are correctly sized,the media now ensures that the finesare not piggy backing on paving slabsor kerbing.” Other improved features of the

Warrior 1400X include:

• Feeder tray — leads to minimalspillage around the machine so theexcavator driver can now keep loadingwithout the need for stopping andclearing.• Collection raise feature —

Provides easier access to the diesel tankcompared to the standard Warrior 1400and generally makes the machine moremaintenance friendly around the corearea of the machine. • Stockpile heights — Increases the

stockpiling capacity on the fines andmid-size conveyors by nearly 50 per-cent with the new chassis riser.• New jack-up screen system —

Allows the site engineer to get access tothe media and change it in less time.The Warrior 1400X has been

designed with economy in mind, with

reduced engine running speed andenhanced hydraulics. The 1400X offersa reduction in fuel consumption of upto 15 percent in comparison to its pred-ecessor, according to the manufacturer. The Warrior 1400X can be fitted

with either a Tier III / Stage 3ACaterpillar C4.4 ATAAC - 4 cylinderdiesel engine developing 120 hp (90kW) at 1,800 rpm, or a Tier IVi / Stage3B Caterpillar C4.4 - 4 cylinder dieselengine developing 110 hp (82 kW) at1,800 rpm.For more information, visit

www.powerscreen.com.(This story also can be found on



guide.com.)

Glenn Sutton (L) and Brian Bell shake hands over the sale of the newmachine.

Sutton Services bought this Warrior 1400X for its United Kingdom site.


1-800-952-0178

worldwide network of authorized Bandit dealers.processing equipment is a

s toughest,y’The industr

worldwide network of authorized Bandit dealers.vailable through the processing equipment is a

longest lasting woo s toughest,

ale th

od

boost your operation’ or rec, grinder r,,chipper,

Contact yours today and see how a Bandit

SMALL EQUIPMENT DEALERS

s bottom line.boost your operation’ler can help yc or rec

Contact yours today and see how a Bandit

USH CHIPPERS,(BRSMALL EQUIPMENT DEALERS

dit

AC) ARBORVVAC) STUMP GRINDERS,USH CHIPPERS,

1-800-952-0178

LARGE EQUIPMENT DEALERS

TREE CHIPPERS,WHOLE (BEASTT,LARGE EQUIPMENT DEALERS

Y MOWERS) FORESTRTREE CHIPPERS,

For large equipment inquiries in OH,

630-293-0606 ILgo,est ChicaW

708-596-8050 ILMokena,

ax: 847-678-3587F847-678-3633

IL 60176ark,Schiller P River Rd.5050 N.

M IA, , MN, IL, , IA, Y, KY,, IL, Y IL, Y, IL, IN, , KYFor large equipment inquiries in OH,

Little Canada,t.comtlasbobca.awww

630-553-0150 ILorkville,YYorkville,

847-526-4522 ILauconda,W

or if your region is not represented abo WI and MI, , or if your region is not represented abo MN,

877-331-0295651-407-3727

MN 55117Little Canada,3101 Spruce St.

877-262-2284952-894-0894

MN 55337Burnsville, Hwy 13.W1800

.tristawww

866-268-2418715-531-0801

Hudson,745 Exchange Drive

ve, or if your region is not represented abo

t.comtebobca.trista

866-268-2418715-531-0801

54016 WI Hudson,745 Exchange Drive

please call us or visit us online for assistance.ve,, please call us or visit us online for assistance.

304-534-5454 WVairmont,F

304-204-1818 WVLanes,Cross

304-255-1525 WV,ver,Bea

304-226-3299 WVwen,Co

please call us or visit us online for assistance.

lec1.com.www

304-204-1818 OHMarietta,

304-255-1525 WVPikeville,

304-226-3299 WVNorton,5050 N. River Rd.

Schiller Park, IL 60176847-678-3633

Fax: 847-678-3587

Mokena, IL708-596-8050

West Chicago, IL630-293-0606

Wauconda, IL847-526-4255

Yorkville, IL630-553-0150

www.atlasbobcat.com

1800 W. Hwy 13Burnsville, MN 55337

952-894-0894877-262-2284

3101 Spruce St.Little Canada, MN 55117

651-407-3727877-331-0295

745 Exchange DriveHudson, WI 54016

715-531-0801866-268-2418

www.tristatebobcat.com

Cowen, WV304-226-3299

Beaver, WV304-255-1525

Cross Lanes, WV304-204-1818

Fairmont, WV304-534-5454

Norton, WV304-636-6421

Pikeville, KY606-432-0321

www.lec1.com


ServingIllinois

Midwest Crushing & Screening

7144 N Harlem Ave.

Chicago, IL 60631

[email protected]

847.271.5027

IndianaPowerscreen Indiana, Inc.

255 N Hetzler Court

Angola, IN 46703

[email protected]

260.665.5816

MichiganPowerscreen of Michigan

7819 West Jefferson

Detroit, MI 48209

www.powerscreenofmichigan.com

260.665.5816

MinnesotaTheco, Inc.

5470 Quam Ave. NE

St. Michael, MN 55376

www.thecoinc.com

800.776.0335

OhioAGGCORP

P.O. Box 219

Westerville, OH 43086

www.aggcorp.net

614.309.6854


EVO. A NEW CLASS OF MACHINERY.

MR 110 EVO MR 130 EVO

www.wirtgenamerica.comROAD AND MINERAL TECHNOLOGIES

Springfield, Illinois816 N Dirksen ParkwaySpringfield, IL 62702Phone: 217-789-7711

Bolingbrook, Illinois220 East Frontage RoadBolingbrook, IL 60440Phone: 630-739-7474

Carterville, Illinois1505 Donna Drive

Carterville, IL 62918Phone: 618-985-3399

Marengo, Illinois18210 Beck RoadMarengo, IL 60152

Phone: 815-923-4966

Portage, Indiana6450 Melton RoadPortage, IN 46368

Phone: 219-764-8080

Escanaba, Michigan2600 S Lincoln RoadEscanaba, MI 49829Phone: 906-786-6920

DeForest, Wisconsin604 Stokely Road

DeForest, WI 53532Phone: 608-842-4151

DePere, Wisconsin3275 French RoadDePere, WI 54115

Phone: 920-532-0165

Eau Claire, Wisconsin7417 Margaret LaneEau Claire, WI 54703Phone: 715-874-5400

Franksville, Wisconsin2916 N Sylvania AveFranksville, WI 53126Phone: 262-835-2710

Schofield, Wisconsin9808 Weston AvenueSchofield, WI 54476Phone: 715-355-9898

Bridgeton, Missouri4670 Crossroads

Industrial Dr.Bridgeton, MO 63044Phone: 314-291-1330

Cape Girardeau, Missouri3364 Percy Drive

Cape Girardeau, MO63702

Phone: 573-334-5252

Columbia, Missouri4110 I-70 Drive SE

Columbia, MO 65201Phone: 573-814-0083

Palmyra, Missouri701 Industrial DrivePalmyra, MO 63461

Phone: 573-769-2056

Shepherdsville, Kentucky335 Saltwell Drive

Shepherdsville, KY 40165Toll Free: 877-538-3221Phone: 502-543-3746Fax: 502-543-3716


www.ohiocat.comCleveland, OH440-526-6200800-837-6200

Fax: 440-526-9513Cadiz, OH

740-942-4626800-837-6204

Fax: 740-942-4029Canton, OH

330-478-6525800-837-6207

Fax: 330-478-6529Cincinnati, OH513-771-0515888-332-4658

Fax: 513-672-7658

Columbus, OH614-878-2287888-441-4658

Fax: 614-851-5015Toledo, (Perrysburg) OH

419-874-7975888-339-4658

Fax: 419-873-8255Troy, OH

937-335-7660888-330-4658

Fax: 937-335-6447Youngstown, OH330-530-9010800-837-6203

Fax: 330-530-9102

Zanesville, OH740-453-0563800-837-6205

Fax: 740-452-3605Richwood, KY859-372-4665888-446-4658

Fax: 740-452-3605

www.whayne.com1400 Cecil AveLouisville, KY502-774-4441

Ashland, KY606-928-3444

Bowling Green, KY270-843-3275

Corbin, KY606-528-3140Dry Ridge, KY859-823-1500Evansville, IN812-425-4651Hazard, KY

606-439-4040

Lexington, KY859-254-2756Paducah, KY

270-443-3631Pikeville, KY

606-437-6265


701-223-0890

7910 Highway 2WDevils Lake, ND 58301

701-665-3800

2803 I-94 Business Loop EDickinson, ND 58601

701-456-1400


701-280-3100800-726-7475


701-775-4238

17040 Hwy 11Hankinson, ND 58041

701-242-7474

7695 Highway 18 S.Hoople, ND 58243

701-894-6363

1910 27th Ave SEJamestown, ND 58401

701-251-1400


701-852-3508

4950 E. Highway 12Aberdeen, SD 57401

605-225-6240

1715 US Hwy 14 W.Huron, SD 57350

605-353-1200


605-224-5400


605-342-4850


605-336-3010

One Fabick DriveFenton, MO 64026

800-845-9188

St. Louis, MO866-531-3242Foristell, MO

800-539-9217Columbia, MO800-791-5401

Jefferson City, MO800-845-9177

Springfield, MO888-959-2100Joplin, MO

866-313-1748Willow Springs, MO

866-628-1717Cape Girardeau, MO

800-845-9175Marion, IL

800-845-9179

Metropolis, IL866-299-6044Salem, IL

800-845-9176Troy, IL

866-345-5681Mt. Carmel, IL888-769-7247

www.fabickcat.com

The National Demolition Association has appointed KimWieland as director of member services, reporting directly toMichael R. Taylor, executive director. The NDA is the tradeorganization representing the global demolition industry. In this post, Wieland is responsible for the development and

implementation of the organization’s new education initiative,designed to provide management and safety training to the dem-olition industry while improving professional competency. Shealso will be working on expanding the NDA’s other memberservices, advancing the recruitment and retention of associationmembers, enhancing the NDA’s social media and branding pro-grams, and working on association public relations efforts. Wieland previously worked on association educational pro-

grams for the American Lung Association and the National RuralElectric Cooperative Association. She also served as a teacher. For more information, visit www.demolitionassociation.com. (This story also can be found on Construction Equipment


In this post, Kim Wieland is responsible for the develop-ment and implementation of the organization’s new edu-cation initiative, designed to provide management and

safety training to the demolition industry while improv-ing professional competency.

National Demolition Association AppointsKim Wieland Director of Member Services

Since acquiring the BoxerEquipment line from MertzManufacturing LLC at the end of 2012,Morbark Inc. has been working toestablish a worldwide distributor net-work for the compact utility loaders.Boxer Equipment distributors signed

in the past seven months are:• Abele Tractor & Equipment

Company Inc., in Albany, N.Y.• AGC Irrigation Supplies &

Equipment, with three locations onLong Island, N.Y.• Alexander Equipment Company, in

Lisle, Ill.• Bierschbach Equipment & Supply

Company, with four locations in Iowa,North Dakota and South Dakota• Cobb County Tractor Company,

with two locations in the greaterAtlanta area• Deacon Equipment Company, in

Bloomsburg, Pa.• Essco Distributors Inc., in Bay

Shore, N.Y.• Gaston Rentals Inc., with three

locations in the Charlotte, N.C., metroarea• Grinding & Drilling Inc., in

Desboro, Ontario, Canada• Harrington’s Equipment Company,

in Fairfield, Pa.• Heritage Tractor Inc., with 10 loca-

tions in Kansas and Missouri• Knox Equipment Rentals Inc., in

West Chester, Pa.• Meade Tractor, with seven loca-

tions in Tennessee, Virginia and WestVirginia• Newtown Power Equipment Inc.,

in Newtown, Conn.• Nortrax Northeast, with 10 loca-

tions in Maine, New Hampshire,Vermont and New York• Nortrax Southeast, with nine loca-

tions in Florida• Queensland Mini Diggers PTY

LTD, in Sumner Park, Queensland,Australia• Schmidt Equipment Inc., with five

locations in Massachusetts• Top Notch Equipment, in North

Plymouth, Minn.• Van Wall Equipment, with 12 loca-

tions throughout Iowa, Illinois, Kansasand Nebraska• White Oak Equipment Inc., with

four locations in eastern Virginia• Wilder Motor & Equipment Co., in

Nashville, Tenn.Abele Tractor & Equipment

Company Inc.; Alexander EquipmentCompany; Cobb County TractorCompany; Essco Distributors Inc.;Grinding & Drilling Inc.; NewtownPower Equipment, Inc.; NortraxNortheast; Nortrax Southeast; WhiteOak Equipment Inc.; and Wilder Motor& Equipment Co. also are authorizedMorbark tree care equipment dealers.

Alexander Equipment Company,Nortrax Northeast and NortraxSoutheast also carry Morbark’s indus-trial equipment.Cardinal Rental and Sales

Corporation; Connect Equipment SalesInc.; and Shultis Sales Agency Inc.,have signed Manufacturer’sRepresentative Agreements withMorbark to promote the Boxer line.Cardinal’s area of responsibility coversNew England and the Mid-Atlanticstates. Connect Equipment coversAlabama, Georgia, North Carolina,South Carolina and Tennessee, whileShultis is responsible for promoting theline in Colorado, New Mexico,Wyoming, Utah, Arizona and El PasoCounty in Texas.“We’re excited by the amount of

interest we’ve had from companieswanting to represent the BoxerEquipment line,” said Mark Rau,Morbark dealer development manager.“Our Boxer distributor network isexpanding quickly with companies thatwill give our customers the high-quali-ty service they expect from Morbark.”For more information, visit

www.morbark.com or www.box-erequipment.com.

(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)

Morbark Establishes Distributor Network


www.fabco.com

11200 W. Silver Spring Rd.Milwaukee, WI 53225

414-461-9100Fax: 414-461-8899

Madison, WI608-271-6200LaCrosse, WI608-783-4891

Eau Claire, WI715-832-6647Wausau, WI

715-359-6220Green Bay, WI920-498-8000Superior, WI

715-398-9696Marquette, MI906-475-4191

www.altorfer.com

2600 6th Street S.W.Cedar Rapids, IA 52404

319-365-0551Fax: 319-365-5639

4712 Buckeye St.Davenport, IA 52802

563-324-1935Fax: 563-324-2409

#1 Capitol Dr.East Peoria, IL 61611

304-694-1234Fax: 309-694-41484200 Rodger Street

Springfield, IL 62705217-529-5541

Fax: 217-529-00201519 W. Kenyon Rd.

Urbana, IL 61801217-539-1671

Fax: 217-359-6310

3520 Moberly Ave.Hannibal, MO 63401

573-221-8600Fax: 573-221-7187701 Highway 24W

Moberly, MO 65270660-263-8200

Fax: 660-263-8203

www.macallister.com7515 East 30th St.

Indianapolis, IN 46219800-382-1896

Fort Wayne, IN800-944-0847

South Bend800-685-9849

Lafayette, IN800-283-4231

Washington, IN800-932-5120Terre Haute, IN800-273-5650


YOUR COMPLETE AGGREGATE SOLUTIONYOUR COMPLETE AGGREGATE SOLUTION GGREGA ATE SOLUTION

Shakopee, MN 55379952-224-1500

Bismarck, ND 58502701-223-9700

Fax: 701-223-4815

Minot, ND 58702701-852-0479

Fax: 701-852-1451

Fargo, ND 58102701-282-2662

Fax: 701-364-2190

3902 N. Jessica Ave.Sioux Falls, SD 57104

605-336-9000

www.aisequip.com


Solid choice for yourproductivity.

Lokotrack ST3.8 mobile screen

Optimal screening results

ptimal scrO

ing optimal mobiliteroffotrack ST3.8 is a heaokhe LT

m eening rmal scr

op

otrack ST3.8 mobile scrokL

y and �tivitoduc, pry timal mobilitra deck mobile s-owy tduty-vck ST3.8 is a hea

esultseening reenotrack ST3.8 mobile scr

ehT.ytilibixey and �n eercdeck mobile s

.metsoE-mail: minerals

or tibutdistree sizyield thr

and an optional the ST3.8 is capable of prT. set up

piling and focksteen arge scrlar

ST3.8 is desig

etsso in .com.nam@metso nerals

o .yodaor te s ting yy contace bn morearL. es siz

pti id can be added trdeck vibrating g-ow onal te ST woducing t T3.8 is capable of prg a ors enable quick and easy yevolding side con and f folding side conen ecise scror e�cient and prea f for e�cient and prn ar

esi doror high pned and built f for high p igy and �y

etso our local Mting yoid can be added t

,stcodued end pro sizwors enable quick and easy

d . On-boareeningecise scrahtiw,sbojnoitcu

y

.metsowww

ets om.cso


701-280-3100

800-726-7475


701-223-0890

2803 I-94 BusinessLoop E

Dickinson, ND 58601701-456-1400


701-775-4238


701-852-3508

4950 E Highway 12Aberdeen SD 57401

605-225-6240


605-342-4850


605-224-5400


605-336-3010

CENTRAL SERVICE

& SUPPLY, INC.www.centralsands.com

4219 E. 50th St.Des Moines, IA 50317800-247-2400515-964-8600

Fax: 515-309-0667

3600 N. Grand River Ave.Lansing, MI 48906

517-321-8000

Fax: 517-321-6275

Grand Rapids600 44th Street S.W.Grand Rapids, MI 49548

616-538-2400

Fax: 616-538-0449

Northeast Detroit65809 Gratiot AvenueLenox, MI 48050

586-727-7502

Fax: 586-727-7311


Bridgeport, MI 48722989-777-0090

Fax: 989-777-1583

Traverse City8300 M-72 East

Williamsburg, MI 49690231-267-5060

Fax: 231-267-5257

West Detroit, MI56555 Pontiac Trail

New Hudson, MI 48165248-437-8121

800-457-8121

BUTLER MACHINERY CO.www.butlermachinery.com

AIS CONSTRUCTION EQUIPMENT CORP.

www.aisequip.com


10,000 Tons of Rubble...

Sixty-Year-Old UI Residence Hall Rubble to Be Recycled By Julie WurthTHE (CHAMPAIGN) NEWS GAZETTE

CHAMPAIGN, Ill. (AP) The demolitionof a 60-year-old university residence hallthat housed generations of college studentscreates one serious pile of rubble. More than 10,000 tons, in fact. But only a fraction of the former Forbes

Hall will wind up in a landfill. About 98 per-cent will be recycled in one way or another,part of the “green’’ building practicesrequired under sustainable-constructionstandards. Forbes is being demolished to make way

for a new four-story residence hall at the cor-ner of First Street and Gregory Drive, thethird to be built as part of the IkenberryCommons redevelopment. The cost is esti-mated at $51 million to $55 million, part ofa larger $83 million project that includes anew stormwater detention system in theplaying fields west of First Street and demo-lition of two other residence halls. The UI requires any new building over $5

million to meet “gold’’ LEED certificationunder the U.S. Green Building Council’sLeadership in Energy and EnvironmentalDesign rating system. And under LEEDstandards, 90 percent of a razed buildingmust be recycled or otherwise diverted fromthe landfill, said Steve Street, project execu-tive of ClayCo, the firm managing the latestIkenberry Commons project. At Forbes, an estimated 10,285 tons of

material is being torn down (after asbestosand other hazardous materials wereremoved). Of that, only about 200 tons isheaded to a landfill, or about 2 percent,according to documents filed by AmericanDemolition Corp. in Elgin. The rest — most-ly concrete blocks, masonry and metal — isbeing recycled, Street said. It’s a fairly meticulous process, said

Kirsten Ruby, assistant director of housingfor marketing. And the same philosophy wasapplied to the building’s furnishings. The lounge furniture, desks and beds were

moved out earlier in the spring, destined foruse elsewhere on campus or at other stateagencies. Anything left over is offered first tononprofit organizations and then put up forpublic bid, Ruby said. Doors and fixtures came next. The UI is

keeping many of the doors, knobs, lights andwater meters for use in other residence hallsor buildings. Westin, Scott, Snyder andHopkins halls have similar footprints and

date from the same era as Forbes, builtbetween 1958 and 1961 as part of the origi-nal “six pack.’’ (The sixth, Garner Hall, wastorn down in 2012 to make way for the newNugent Hall.) Next came the removal of asbestos floor

tile and pipes wrapped with asbestos insula-tion. The “soft demo’’ phase followed in mid-

June, with crews removing the wall-mount-ed overhead bookcases, mirrors, door framesand any remaining doors. Excavators with giant hoes began to care-

fully “chew’’ through the structure of thebuilding the week of June 24. That processwas expected to take several weeks as thematerial is painstakingly sorted. Material has to be separated not just into

“trash’’ and “recycling’’ but into type. Mostof the recycling is concrete from the build-ing’s structure, in addition to masonry andmetal, Street said. The metal will be separat-ed into ferrous (steel and iron alloys) andnonferrous (copper and aluminium) and sentto various plants for recycling. The concrete is typically crushed and

reused in road projects, and some could beused as limestone base for construction ofthe new residence hall in spring 2014, saidMike Rosenberger, project supervisor ofClayco. A tour of the site in mid-June showed the

Forbes courtyard filled with piles, sometrash and some recycling. There were bags of insulation, stacks of

wooden doors, rolls of old blue carpet, andpiles of ceiling tiles, drywall and black wallbase — all destined for the landfill. On the recycling side, all kinds of metal

were set aside, from screws and handrails toexit signs, wiring, red fire-extinguisher cabi-nets, lights, piping, ductwork, lathe supportsand window frames. University Housing also will save 250

exterior bricks from Forbes as keepsakes,available for a $150 donation through the UIFoundation, Ruby said. About 17 brickshave already sold. During the actual demolition, backhoes

tear down an area and use a magnet toextract some of the metal, and crews walkthrough to pull out valuable materials,Rosenberger said. “It almost comes down to hand sorting,’’

he said. The process takes more time and labor

than simply tearing everything down andtrucking it to a landfill, Rosenberger said.

The demolition at Forbes was budgeted at$543,550. It may be more expensive, but it pays off

in the long run, he said. And as more and more contractors adopt

sustainable practices, using recycled materi-al and keeping construction debris from thelandfill, prices will drop and it will becomemore economical, Street said, “and that’sgood for business.’’ “It’s like anything else that’s new. It takes

a few years for everyone to buy in and acceptit as the norm,’’ he said. Rosenberger said his last three projects

have all been built using LEED standards.“It’s all around the country.’’

Students also expect the university to useenvironmentally sound construction prac-tices, Ruby said. They wouldn’t want tomove into a new building if the old one weresimply trashed, she said. The UI’s commitment to using LEED

standards follows a long trend toward recy-cling and other environmentally friendlypractices, said Morgan Johnston, sustainabil-ity coordinator for UI Facilities and Services. A big recycling push on campus began in

1989, following the closing of theCommunity Recycling Center inChampaign, she said. A materials recoveryfacility opened in 1997 to sort waste fromacross campus. In fiscal 2012, the campuswide recycling

system diverted 84.5 percent of the UI’ssolid-waste stream from the landfill, includ-ing trash, yard waste and construction debris,she said. The goal is to bring that up to 90percent, which is considered “zero waste,’’one of the goal’s of the Illinois ClimateAction Plan. The UI and other universitieshave pledged to become “carbon neutral’’ by2050. And starting with the construction of the

Business Instructional Facility in 2006, UIprojects began adhering to LEED buildingstandards. When other buildings were razedas part of the Ikenberry Commons redevel-opment, about 97 percent of the constructionwaste was diverted from the landfill, saidAndy Blacker, spokesman of UI Facilitiesand Services. In the Lincoln Hall renovation, completed

last year, many of the original doors andwoodwork were salvaged and reused. Slatetiles were ground up to be used as mulcharound the building site, Blacker said. “It’s pretty easy to do. Most of those mate-

rials can be recycled,’’ Johnston said. Johnston didn’t have a specific analysis

on how much the LEED standards cost ver-sus conventional building or demolition pro-cedures, but she noted that landfill tippingfees are not declining. “There is some savings by not having it

go to a landfill,’’ she said. “At the state levelwe are getting low on landfill space.Sometime in the next couple of decades, it’snot going to be easy to just throw it away.’’ Michael Mervis, director of Mervis indus-

tries, said more and more universities arepushing to reuse everything that can bereused. His company has been recyclingmetal for decades, and one of its sub-sidiaries, Soltec and Co. in Decatur, is pro-cessing the steel from the Forbes demolition. Steel and other metals are easily recycled

and often quite valuable, he said. It wouldcost 4 to 6 cents a pound to landfill iron andcopper, but those metals can sell for 35 centsto $3.50 a pound as salvage, depending onthe market, he said. “It’s profitable; it’s not more costly,’’

Mervis said. “It’s possible that a demolition project

under the right market conditions can becash-flow positive. You can tear the buildingdown and be paid for it,’’ he said, althoughthat’s less likely if a building has a lot ofwood or stone, which isn’t as profitable torecycle. Johnston said the UI is trying to be proac-

tive and show individuals and businesseshow they can adopt more sustainable prac-tices and reduce their landfill waste to avoidthe exorbitant tipping costs of the future —while protecting the environment. “We’re doing this to show people how to

get it done and how it works,’’ she said. (This story also can be found on



“Sometime in the nextcouple of decades, it’s notgoing to be easy to justthrow it away.’’

Morgan JohnstonUI Facilities and Services


SENNEBOGEN green line material handling machines make your competitors “green with envy”SENNEBOGEN green line material handling machines make your competitors “green with envy”

High Productivity – Low Operating Costs

Muskegon, MI231-798-8754

Kentwood, MI616-698-2960

Battle Creek, MI269-965-1269

New Hudson, MI248-356-5200

Romulus, MI734-641-8238

Saginaw, MI989-752-9400

Sterling Hts, MI586-977-6000

Traverse, MI231-943-3700

Zeeland, MI616-748-4108

Lansing, MI517-272-5033

Wixom, MI (Cons. Division)248-356-5200

Byron Center, MI616-878-7450

Louisville, KY 502-491-4000

Evansville, IN812-425-4491

Corbin, KY606-528-3700

Lexington, KY859-259-3456

Stanville, KY606-478-9201

Paducah, KY270-444-8390

Indianapolis, IN317-872-8410

Ft.Wayne, IN260-489-4551

HOWELL TRACTOR &EQUIPMENT

LLCwww.howelltractor.com

Gary,IN800-852-8816

Peru, IL800-342-6072

GIBSON MACHINERY

LLCwww.gibson

machinery.com

Oakwood Village,OH

440-439-4000

Pittsburgh, PA 724-695-5000

Carterville, IL618/985-3399

Bridgeton, MO314-291-1330

Columbia, MO573-814-0083

Cape Girardeau, MO573-334-5252

Palmyra, MO573-769-2056

Franksville, WI262-835-2710

DePere, WI920-532-0165

DeForest, WI608-842-4151

Eau Claire, WI715-874-5400

Schofield, WI715-355-9898

Escanaba, MI906-786-6920

THE VICTOR L.PHILLIPS CO.

www.vlpco.com

Kansas City, MO 800-878-9290

Joplin, MO800-878-8223

Brookline Station,MO

800-955-2729

Wichita, KS800-878-3346

Topeka, KS800-878-4345

Garden City, KS 800-511-1435

Savage, MN 800-888-9515

Des Moines, IA 800-555-1445

Cedar Rapids, IA 800-616-6615

Sioux City, IA 800-633-9104

Milan, IL 800-633-9114

Duluth, MN 800-888-9535

Virginia, MN 800-752-4304

Bismark, ND800-247-1282

Dickinson, ND888-418-2873

Fargo, ND800-342-4330

Omaha, NE866-733-1100

Minot, ND701-852-3188

Rapid City, SD888-388-0266

Sioux Falls, SD800-262-5373

Williston, ND877-570-4635

Lincoln, NE866-801-6261

ALTA EQUIPMENT COMPANYwww.altaconstructionequipment.com

BRANDEIS MACHINERY & SUPPLY COMPANY

www.brandeismachinery.com

ROLAND MACHINERY CO.www.rolandmachinery.com


www.rmsequipment.com

TITAN MACHINERYwww.titanmachinery.com


Simplified profitability

Dynapac’s complete line of rollers and pavers combine years of experience with innovative thinking to make the job as fast, simple, and profitable as possible, from beginning to end.

F1000 series pavers: Cummins QSB 6.7 liter interim Tier 4 engineNorth American styling featuring the lowest deck height in the industry at 63 inches Easy to use control panel with one touch auto fill and cleaning modes

CA2500-CA4000 single-drum vibratory rollers:Static linear loads of 140-252 pliActive bouncing control Cummins or Deutz interim Tier 4 engine

CP224, CP224W and CP274 pneumatic tired rollers:Smooth start-stop system for directional changesWide-base tiresAir-on-the-run

Built for maximum performance, ease of maintenance and lower total cost of ownership, Dynapac’s rollers and pavers will provide you with more Uptime by Design.

www.dynapac.us

2300 Cassens DriveFenton, MO 63026

(636) 343-9970www.lubyequipment.com

Cape Girardeau(573) 334-9937

Springfield (217) 744-2233

Quincy (217) 222-5454

Caseyville(618) 397-9971

50 East Kingston Ave.Columbus, OH 43207

614-443-6541www.columbusequipment.com

Perrysburg(419) 872-7101

Cincinnati(513) 771-3922

Richfield(330) 659-6681

Cadiz(740) 942-8871

Dayton(937) 879-3154

Canton(330) 453-4521

Zanesville(740) 455-4036

Painesville(440) 352-0452

Piketon(740) 289-3757

DiamondEquipment Inc.1060 E. Diamond Ave.

Evansville, Indiana 47711(812) 425-4428(800) 258-4428

Fax: (812) 421-1036www.diamondequipment.com

Terre Haute(812) 299-4747(888) 343-4747

Fax: (812) 299-3687

Mt. Vernon(618) 242-2273 (800) 388-6396

Fax: (618) 242-9161

Bowling Green (270) 781-1061(800) 489-1061

Fax: (270) 781-0907

Nashville (615) 641-1100(800) 635-9454

Fax: (615) 641-1108

4301 North Cliff Ave.Sioux Falls, SD 57104

(888) 753-8907

3801 North Deadwood Ave.Rapid City, SD 57702

(800) 658-3047

39288 133rd St.Aberdeen, SD 57401(888) 484-6312

www.dieselmachinery.com

4100 Gardner Ave.Kansas City, MO 64120

(816) 241-9290(816) 241-1738www.vlpco.com

Joplin(800) 878-8223(417) 781-8222

Springfield(800) 955-2729(417) 887-2729

Wichita(800) 878-3346(316) 838-3346

Topeka(800) 878-4345(785) 267-4345

Garden City(800) 511-1435(620) 275-1996

Kenworth...

PACCAR MX-13 EngineOffers Fuel Economy BenefitsComing off a record year of PACCAR

MX engine sales in Kenworth trucks,Kenworth is anticipating even further propri-etary engine adoption with the PACCARMX-13.“We’ve taken an excellent engine plat-

form and made it even better with the PAC-CAR MX-13,” said Preston Feight,Kenworth assistant general manager of salesand marketing. “The immediateimpact is animprove-

mentin fuelecon-o m yof upto 3.5p e r c e n t .That’s a signif-icant gain forc u s t o m e r swhich may amount to about a $2,500 annu-al fuel savings for the typical long-haul truckaveraging 120,000 miles per year.“We feel that Kenworth and the PACCAR

MX-13 will be the truck make and engine ofchoice for those fleet and truck operatorswho want a fuel-efficient, reliable 12.9-literengine in their Class 8 trucks,” said Feight.Designed for linehaul and vocational

heavy duty truck operators, the PACCARMX-13 utilizes the latest common rail fuel-delivery technology, which enables injectionpressures of up to 2,500 bar, enhancing fuelefficiency and performance. The commonrail system uses controls to regulate the fuelin a central manifold, only compressing theamount of fuel mixture needed. The result is

finer fuel atomization for optimized combus-tion, enabling lower fuel consumption andemissions, according to the manufacturer.In addition to its fuel efficiency, the engine

offers high reliability and durability, light-weight design and low cost of ownership.The PACCAR MX-13 is rated up to 500 hp(372.7 kW) and is the only 13-L class enginerated up to 1,850 lb.-ft. of torque. It is avail-

able for KenworthClass 8 models,including theT 6 6 0 ,T 6 8 0 ,T 7 0 0 ,T 8 0 0 ,T 8 8 0

and W900. The PACCAR MX-13 is assem-bled at the PACCAR engine plant inColumbus, Miss.The PACCAR MX-13 meets the

Environmental Protection Agency (EPA)regulation requiring that all model-year 2013engines be equipped with on-board diagnos-tics (OBD). OBD improves engine reliabili-ty by monitoring the performance of thevehicle’s emission system to help detectemission issues, recognize component faults,and ensure optimal performance.For more information, visit www.ken-

worth.com.(This story also can be found on



Designedfor linehaul

and vocationalheavy duty truck operators,the PACCAR MX-13 utilizesthe latest common rail fuel-delivery technology, which

enables injection pressures of upto 2,500 bar.


> > >

Kennesaw, Georgia 30144www.kawasakiloaders.com

AN E.P.I.C. GENERATIONEFFICIENT

POWERFUL

INTELLIGENT

COMFORTABLE

Kennesaw, Georgia 30144www.kawasakiloaders.com

eo kilo

Howell Tractor480 Blaine StreetGary, IN 46406800/852-8816

Fax: 219/977-4220

Illinois Truck & Equipmentwww.iltruck.com320 Briscoe DriveMorris, IL 60450

815/941-1900Fax: 815/941-1486

Mid CountryMachinery

3478 5th Ave South (Bus. Hwy 20)

Fort Dodge, IA 50501800/206-5936

4734 Sergeant Rd. (Hwy 63)

Waterloo, IA 50701319/234-8710

106 8th StreetSergeant Bluff, IA 51054

712/943-4470

Custom Truck & Equipment

www.customtruckandequipment.com7701 E. 24 Highway

Kansas City, MO 64125800/861-1065816/241-4888

Fax: 816/241-8826

2121 Stephens BlvdJoplin, MO 64804

417/659-8969Fax: 417/659-8871

Kelbe BrothersEquipment Co., Inc.

www.kelbebros.com12770 W. Silver Spring Drive

Butler, WI 53007262/373-2151

Fax: 262/373-2102

4621 Dutch Mill RdMadison, WI 53716

608/221-8300Fax: 608/221-0610

Dwight Etts GrandEquipment Companywww.grandequipment.com3310 Hudson Trail Dr.Hudsonville, MI 49429

616/896-7700Fax: 616/896-6700

ConstructionMachinery Company

www.cmcky.com2911 S. English Station Rd.

Louisville, KY 40299502/267-4020866/901-2262

Fax: 502/261-9251

2235 Ragu DriveOwensboro, KY 42303

270/683-2000877/683-2262

Fax: 270/683-3727

267 W. Jay Louden Rd.Carrollton, KY 41008

502/732-4661Fax: 502/732-8355

Page�80�• September�14,�2013�•�www.constructionequipmentguide.com�•�CONSTRUCTION�EQUIPMENT�GUIDE

12920 Gravois RoadSt Louis, MO 63127

314/729-0125

12321 E. Pine StreetTulsa, OK 74116918/438-1700

6715 W. RenoOklahoma City, OK 73127

405/495-7820

Kansas City, KS913/850-6300877/851-5729

Cleveland Crane & Shovel Sales, Inc.26781 Cannon RoadCleveland, OH 44146

440/439-4749800/362-8494

Fax:�440/439-2177

[email protected]

www.craneandshovel.net

930 W 138th StreetRiverdale, IL 60827

708/656-7700Fax: 708/532-127325210 Brest RoadTaylor, MI 48180734/947-9250

Fax: 734/947-9260

920 S State Road 39Lebanon, IN 46052765/482-4145

Fax: 765/482-49282126 Glenview DriveEvansville, IN 47720

812/422-6912Fax: 812/422-6982

Aspen EquipmentCompany

www.aspenequipment.com1525 S.E. Cortina Dr.Ankeny, IA 50021515/965-1000

Fax: 515-965-179011475 S. 153rd St.Omaha, NE 68138402/894-9300

Fax: 402-894-9302

Kirby Smith Machinery Inc. Walter Payton Power Equipment LLC

RT9150E rough-terrain craneAt Grove, we provide high-performance features, reliable / support and a quality product lineup – because cranes are all we do. With rough-terrain models ranging from - USt, we’ve got a crane to handle any jobsite.

Featured is the RTE – its USt capacity and ft. boom combination provide the best capacity and longest boom in its class.

For more information, visit www.manitowoccranes.com

LEADERS IN LIFTING

Tiltable cab Superior boom design Removable outrigger boxes


Construction Equipment from the Ground Up.

www.kubota.com©Kubota Tractor Corporation, 2008

59 HP Kubota diesel engine (Interim Tier IV compliant) Fully integrated front loader and backhoe with Quick Attach Coupler

capability for maximum efficiency HST Plus Transmission with Feather Step operation

2216 N. Green Bay Rd.Waukegan, IL 60087

847/336-1205Fax 847/336-2697

27939 W. Concrete Dr.Ingleside, IL 60041

815/363-4100Fax 815/363-4109

2001 Cherry Hill Rd.Joliet, IL 60433815/464-6650

Fax 815/464-6951

Burris Equipment Co.Anoka, MN

888/448-5266753/323-1720Shakopee, MN877/753-6100952/445-6310

Corcoran, MN888/479-4342763/479-8200

Lano Equipment, Inc.1801 E. University Ave.Urbana, IL 61802

800/798-1772Fax: 217/337-1775

2900 E. Jackson St.Macomb, IL 61455

888/360-9225

200 North St.Prophetstown, IL 61277

877/221-0881

Birkey’s Construction Equipment124 N. Schmale Rd.Carol Stream, IL 60188

630/510-6050Fax 630/510-6051

1305 Sentry DriveWaukesha, WI 53186

262/521-5802Fax 262/521-5801

1st Choice Equipment LLC

3333 W. Coliseum Blvd.Fort Wayne, IN 46808

260/483-8868

4951 West 96th StreetIndianapolis, IN 46268

317/872-4877www.southeasternequip.com

Southeastern EquipmentCo., Inc.


Bridge Traffic Steadily Flows With Portable Traffic DevicesWhen Jonathan Abraham saw

the request for portable traffic sig-nals at the Allanburg Bridge, hesaw it as just a routine order for aroad repair project. Bridge repairsare bread and butter work forNorth America Traffic Inc. (NAT),where Abraham is the firm’s serv-ice and compliance coordinator.But as spring approached and

the project ran into a delay, the sig-naling challenges became anythingbut routine. Then, Abraham andNAT were called upon to showhow their custom design capabili-ties set the firm apart from otherportable signal manufacturers. Located in the Niagara region of

southern Ontario, the Allanburg liftbridge spans 200 ft. (61 m) acrossthe Welland Canal, part of the St.Lawrence Seaway system.Maintenance to the road wasplanned while seasonal Seawaytraffic was closed over the wintermonths. NAT, based in nearby PortColborne, ON, was contracted toprovide a traffic control solution tolimit road traffic to a single lane.The order called for two sets ofportable traffic signals to work inconjunction with the bridge’s exist-ing traffic control system: one ateach end of the bridge plus two forthe intersection on its east end.

A New Season Calls for New Signaling

When the construction work raninto delays and extended into theopening of the 2013 shipping sea-son, the traffic control situationsuddenly became much more com-plex. The lift bridge must be raisedto allow ships to pass on the canal.Road traffic crossing the canal isnormally controlled by trafficlights operated from the SeawayAuthority’s remote station, a fewmiles from the bridge.To manage traffic for both con-

struction work on the bridge andSeaway traffic under it, NAT’sportable signals were now requiredto replicate the Seaway’s remote-operated controls. Normally, thesignals are coordinated so whenthe bridge is about to be raised, thetraffic signals allow vehicles toclear the bridge without gettingcaught between the lights. Theportable signals would have tointegrate with the bridge controls,and also coordinate the single-laneflow of road traffic.

Seven-Day TurnaroundThe contractor foresaw the

delay in the project and notifiedNAT of the difficulty two weeksbefore the Seaway would open. “Our technician went out to the

site on a Wednesday to scope outthe traffic and signaling. We coor-dinated with the Seaway techni-cians and the MTO [OntarioMinistry of Transportation], andprogrammed a new control mod-ule. We had the portable signalsoperating by the followingThursday, on the first day ofspring,” Abraham said.NAT developed the required

controls to synchronize theportable traffic signals with thebridge control signals, including anoverride requested by MTO and aconfirmation signal back to theSeaway control station. Because ofNAT’s rapid turnaround on thenew control system, the contractorwas able to proceed with the bridgerepairs with no further hold-ups.

Designed forCustomization

According to Abraham, the flex-ibility to meet the needs of the

Allanburg Bridge project is inher-ent in the design of NAT portabletraffic signals. “Our programming circuitry has

a built-in pre-empting option thatwe often use to manage traffic atrailway crossings. The signalscycle in normal pattern for one-lane traffic, until the sequence ispre-empted by a relay from therailway’s crossing system. Weadapted the railway pre-emptionfeature into a ‘hold for bridge’ pro-gram, including a 2-minute delayfor traffic to clear the lane beforethe bridge lift was activated.“After we delivered the portable

signals to the site, we simply con-nected a cable to the bridge controlcircuitry through a 12VDC to120VAC relay.”The bridge repairs required two

months more to complete, as workwas interrupted repeatedly forcanal traffic, but the portable sig-nals operated flawlessly through-out the project. Powered by highlyefficient solar cells and batterypacks, NAT signals have a 30 dayautonomy rating for periods of lowlight or minimal sun exposure. The

signals are synchronized by radiotransmissions, but had no difficultywith potential interference fromboat communications and the steelstructure of the bridge.

Customer-Driven SolutionsThe railway pre-emption, or

hold-for-bridge feature, is just oneof many program modules provid-ed on NAT portable signals. NATalso has provided custom controlsystems that respond to a widerange of sensors for detectingmotion, proximity and radiation,among others. All systems areequipped with manual and remotecontrol overrides.“This is one case where our

experience working on site withcustomers really paid off,” saidAbraham. “Every new solution wedevelop becomes part of the toolkit for our future control systems.As we deal with this every day, wehave the knowledge of the technol-ogy available to adapt the pro-gramming and integrate it with theexisting signal system.“This project turned around just

a little quicker because our plant isso close to this bridge. But, other

than the extra day or so for traveltime, we would do the same forany customer.”

About North AmericaTraffic Inc.

North America Traffic waslaunched as R.C. Flagman in 1993when Peter Vieveen built theworld’s first Remote ControlledFlagman out of his garage. At thetime, Vieveen was a senior estima-tor in the construction industrywith more than 25 years of con-struction experience. He under-stood the importance of reducingcosts while increasing safety.North America Traffic now oper-ates a full production facility, andits products have been used onmore than 3,000 projects acrossNorth America. Today, the compa-ny has eight different models ofportable traffic signals, flashingbeacons and flagging systems tomeet all traffic control needs.For more information, visit

www.northamericatraffic.com.(This story also can be found on



mentguide.com.)

Coordinating single-lane road traffic with the ups and downs of the Allanburg lift bridge required North America Traffic to fast-tracknew custom controls for its portable traffic signals.

Towmaster uses this event as an opportunity to net-work and build positive and ongoing relationshipswith both its vendors and customers.

Towmaster, Inc., manufacturer of equipment trailers andtruck bodies, held its 4th Annual Equipment and EducationExpo on July 16. More than 300 key people from Minnesota’s Department

of Transportation, along with multiple county, township andcity departments, attended the event, which featured more 30vendors and included four educational seminars all focusedon the needs of the local and statewide transportation field.A lunch was provided and prizes were given away, includ-

ing a $4,000 Swenson spreader to one lucky municipality.“This expo has become a huge event for Towmaster and

its partners,” said Tim Erickson, Towmaster truck equipment

sales manager. “It builds and solidifies relationships betweenus, our vendors and our customers, as well as offers ongoingeducation and information vital to the transportation depart-ments of cities, townships, counties, and the state ofMinnesota.”Attendees learned about new products available from

Towmaster, Omaha Standard, Falls Plows, Valley Blades,Force America, Whelen Lighting, Astleford International,Boyer Trucks, Swenson Spreaders and more. They also learned about trailer GVWR, DOT regulations,

crane operating and plow blades from attending the educa-tional seminars.

“This event has grown over the last four years and it’ssomething unique to Towmaster,” said Len Stulc, presidentof Towmaster. “Our employees pull together as a team andwork hard to make this event positive and successful. Ourpartners help in a tremendous way and all the vendors toldme it was a great event for them.”Towmaster uses this event as an opportunity to network

and build positive and ongoing relationships with both theirvendors and customers.

(This story also can be found on Construction EquipmentGuide’s Web site at www.constructionequipmentguide.com.)

Pages 83-93To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

SECT IONTrucks & Trailers

A lunch was provided and prizes were given away,including a $4,000 Swenson spreader to one luckymunicipality.

Attendees learned about new products available fromTowmaster, Omaha Standard, Falls Plows, ValleyBlades, Force America, Whelen Lighting, AstlefordInternational, Boyer Trucks, Swenson Spreaders andmore.

Mack to Begin Production of DME-Powered Vehicles in 2015Mack Trucks will begin produc-

tion of dimethyl ether (DME)-powered Mack Pinnacle AxleBack models in 2015. DME, anon-toxic, clean-burning alterna-tive fuel, offers many environmen-tal and societal benefits, includingthat it can be made from multiplesustainable feedstocks.One of the most significant

advantages of the fuel is that it pro-duces no soot, eliminating the needfor a diesel particulate filter (DPF).DME can provide up to a 95 per-cent CO2 reduction compared withdiesel when produced from bio-mass or biogas.Furthermore, DME can be made

from North America’s plentifuldomestic natural gas supply, food

waste, animal waste, grass clip-pings and other sustainablesources, offering the potential tohelp reduce dependency on foreignoil.“The benefits of DME are

numerous,” said Kevin Flaherty,president of Mack Trucks NorthAmerican Sales & Marketing. “It’sbetter for the environment becauseit burns clean, and it can be madefrom sources that are domesticallyavailable. Mack trucks are built inthe U.S.A., and with DME, we’llbe powering our vehicles with afuel made in America as well.”The Pinnacle Axle Back model

powered by DME will be equippedwith a Mack MP8 engine, offeringa 13-L engine to easily handle

heavy workloads. The PinnacleAxle Back model is ideal for high-way van trailer applications, bulkhauling, flatbed and dump trailerjobs. DME has the same performance

and energy efficiency as diesel.The fuel is compression-ignited, ishandled and stored similar topropane and does not need cryo-genic temperatures or high tankpressures.“Mack is a leader in natural gas

technology development, and webelieve DME has tremendouspotential as an effective way to usethe country’s abundant natural gasreserves to power heavy-dutytrucks,” Flaherty said. “DME isunique in that it is clean, easy to

handle, safe to store and will bemade domestically, benefittingeveryone.”DME can be produced by small-

scale production units that convertbiogas and natural gas into the fuel.Oberon Fuels recently announcedits first innovative production unitwould go online in June inCalifornia’s Imperial Valleyregion.“Oberon Fuels has developed

small-scale, skid-mounted produc-tion units that can cost- effectivelyconvert a variety of feedstocks toDME,” said Rebecca Boudreaux,president of Oberon Fuels. “Withthese small-scale production units,regional fuel markets are created,offering the potential to bypass the

infrastructure challenges of usingan alternative fuel while alsoenabling the use of locally avail-able feedstocks.”Mack’s DME-powered Pinnacle

model will join an alternative fuellineup that includes the natural gas-powered Mack TerraPro caboverand low entry models and the nat-ural gas-powered Mack Pinnacle,which made its debut during the2013 Mid-America TruckingShow. Mack also plans to launch anatural gas-powered MackGranite.

(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)

Towmaster Annual Education Expo Draws More Than 300

Page 84 • September 14, 2013 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

AIS ConstructionEquipmentCorporation

3600 North Grand River AvenueLansing, MI 48906

517-321-8000Fax: 517-321-6275

600 44th Street S.W.Grand Rapids, MI 49548

616-538-2400Fax: 616-538-0449

65809 Gratiot AvenueLenox, MI 48050586-727-7502

Fax: 586-727-7311

4600 AIS DriveP.O. Box 253

Bridgeport, MI 48722989-777-0090

Fax: 989-777-1583

8300 M-72 EastWilliamsburg, MI 49690

231-267-5060Fax: 231-267-5257

56555 Pontiac TrailNew Hudson, MI 48165

248-437-8121800-457-8121

www.aisequip.com

2216 N. Greenbay Rd.Waukegan, IL 60087

847-336-1205

2001 Cherry Hill Rd.Joliet, IL 60433815-464-6650

Fax: 815-464-6951

27939 W. Concrete Dr.Ingleside IL 60041815-363-4100

www.burrisequipment.com

949 3rd Ave.Windom, MN 56101

507-678-2752

Ditch Witch ofNorth Dakota1100 W. Main Ave.

West Fargo, ND 58078701-282-3600877-282-3600

Fax: 701-282-3636

2921 Twin City Dr.Mandan, ND 58554

701-663-9551877-663-9551

Fax: 701-663-0692

Vermeer Sales & Service661 Hwy T14Pella, IA 50219866-483-7633

Fax: 641-628-4283

Vermeer Siouxland4858 D. Ave.

Marcus, IA 51035712-376-2310

Fax: 712-376-2312

Vermeer of Eastern Iowa101 Commerce Blvd.Tipton, IA 50219563-886-2444

Fax: 563-886-2223www.vermeeriowa.com

Magic Valley Electric Cooperative AddsTerex TL41P HyPower Truck to Fleet

Terex Utilities recently delivered anew TL41P Hi-Ranger telescopicmaterial handling aerial deviceequipped with its HyPower HybridSystem to Magic Valley ElectricCooperative (MVEC). The unit is already hard at work

around work sites in the Rio GrandeValley, reducing fuel consumption,diesel exhaust emissions and noise pol-lution. It also reduces operating costsfor MVEC, which is headquartered inMercedes, Texas, with additional loca-tions in Edinburg, Pharr andBrownsville. Founded in 1937 to bring electricity

to the rural areas of the Rio GrandeValley, today Magic Valley, a privatelyowned company, has 4,800 mi. of ener-gized lines to serve more than 100,000residential and commercial members inTexas. According to Rick Mendez, fleet

manager of MVEC, by utilizing plug-in electric hybrid technology to operatethe truck’s boom functions and acces-sories, the Terex TL41P HyPowertruck offers Magic Valley the opportu-nity to lower the carbon footprint of itsutility truck fleet while saving moneyin fuel costs. “The Terex HyPower system is

designed for the electric utility indus-try,” said Mendez. “It gets exceptionalfuel economy without sacrificing pro-ductivity. And, it’s durable in all weath-er conditions so we’re able to use ityear-round, increasing the savings wecan pass onto our members whileimproving environmental conditions.”Designed to reduce, or even elimi-

nate, the use of fuel for the work donewhile the vehicle is sitting still, theTerex TL41P HyPower truck usesstored energy from the HyPowerhybrid system’s rechargeable batteriesto power the non-propulsion functionsof the vehicle. MVEC’s new truck canwork for hours without crews needingto start the vehicle engine. The Terex HyPower system also

reduces a whole range of pollution pro-duced from diesel fuel and eliminatesthe noise from an idling engine nor-mally used to run the hydraulic system,as well as reduces disruption to MagicValley customers and crews.“The Terex TL41P HyPower truck

has been a good fit for us,” said JohnHerrera, MVEC general manager. “Weare pleased with the productivity we’vegotten on projects, and our crews espe-cially like the quietness of the truck’soperation — they are able to more eas-

ily communicate with one another onthe job site.”Since putting the Terex TL41P

HyPower unit into service earlier thisspring, MVEC crews have used it tochange out a transformer, as well as onroutine troubleshooting tasks and serv-icing customer power outages.According to Herrera, Magic Valley

is evaluating opportunities to add addi-tional Terex HyPower trucks to its fleetin the future. And because the TerexHyPower Hybrid System can be retro-fitted onto existing vehicles, theCooperative is considering adding thesystem to other trucks in its fleet,according to Herrera. Also, the TerexHyPower hybrid system is durableenough to outlive its first vehicle so itcan be used on another truck, increas-ing MVEC’s return on investment.For more information about Magic

Valley Electric Cooperative, call866/225-5683 or visit http://www.mag-icvalley.coop/. For more information on the Terex

HyPower Hybrid System, visit:http://www.terexhypower.com/.




guide.com.)

Terex Utilities recently delivered a new TL41P Hi-Ranger telescopic material handling aerial device equippedwith its HyPower Hybrid System to Magic Valley Electric Cooperative (MVEC).

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • September 14, 2013 • Page 85

6140 Highway 10 NWAnoka, MN 55303

763-323-1720 888-448-5266

Fax: 763-422-3949

3021 West 133rd Shakopee, MN 55379

952-445-6310 Fax: 952-496-0263

23580 Highway 55 Loretto, MN 55357

763-479-8200 Fax: 763-479-8201

1015 Highway 212 WestNorwood Young America, MN

952-467-2182Fax: 952-467-3259

901 Parker Ave. W.Dassel, MN 55325

877-570-2740www.farmriteequip.com

Scharber & Sons, Inc.13725 Main Street Rogers, MN 55374

763-428-4107 Fax: 763-428-2700 www.scharbers.com

1929 E. Madison Ave.Mankato, MN 56001

507-387-7376Fax: 507-387-7399

1400 W. Ogden Ave.Naperville, IL630-355-7150

310 W. 162 St. Rt. 6South Holland, IL

708-331-6362

3110 Prairie Rd.Rockford, IL

815-961-3160

1560 North Old Rand Rd. Wauconda, IL847-526-7700

600 Walnut CtRockdale, IL

815-730-9011

2170 South Yost Ave.Bloomington, IN 47403

812-333-9677Fax: 812-333-9731

5400 Industrial Rd.Fort Wayne, IN 46825

260-482-8576Fax: 260-483-4057

7355 East 30th St.Indianapolis, IN 46219

317-544-3411

Lafayette, IN 47905765-477-6933

Fax: 765-448-9038

South Bend, IN 46619574-232-1461

Fax: 574-233-3324

www.westsidetractorsales.com


JEFF BELZER’SLAKEVILLE, MN

CHEVROLET

A POWERFULWORKFORCE

CALL FOR

SPECIAL PRICING

FOR MNLA-AGC-NAHB

MEMBERS ON

SELECT VEHICLES

Vehicles ready for work at a moment’s notice. Professionals trained to keep business owners happy. Service facilities equipped for commercial applications. As a Chevy Business Central dealer, we’re all business.

COMMERCIAL HEADQUARTERSJeff Belzer Chevrolet, 50 & Cedar, BX 965 Lakeville, MN

Please Call the Commercial Dept, 1-866-247-4847 OR 952-469-4444All Rebates & Incentives to Dealer, Must Qualify for Same, Prices Subject to Change

©2009 General Motors

George Miller [email protected]

John Zadurski [email protected]

2012 2500 expres vans, from $24,999. 2013 k3500 4x2 chassis 84 c/a, gas,posi, sno prep, from $26,999.

Cube, 4-12’ Cutaways, In Stock 12’ Flatbed, Gas, 4x2

84 C/A, Gas, 4x4, 11’ Tipper 2013 k3500 crew long box, wt, 6.0 gas,has to go $33,299, plus ttl

2013 k2500, ready for plow, call for pricing.

2 Crew Gas 4x4’s ChassisInbound

Call for Info



Felling Trailers’ Employees Participate in Mudman 5K Thirty-one Felling Trailers employees accepted and

participated in the Mudman challenge at PowderRidge Ski Area in Kimball, Minn., on Aug. 17. The2013 course consisted of roughly 15 obstacles thattested participants’ strength, endurance, and mentalfortitude.“[It was] exhilarating,” said Sheri Leonard, human

resources and safety coordinator at Felling Trailers.When asked if she would do it again, she responded,“Definitely. It was work, but it was fun.” Jim Welle, material handler at Felling Trailers said

“It was crazy, and there was lots of mud. More mudthan I ever could have expected.”

In addition to running or walking up and down theski hills, some of the obstacles included the following: • Trenches (mud tunnels covered with plywood and

more dirt) • Ghilliegans Island (a surprise)• Snake Pit (Pond crossing Mudman style)• B-4 U Walk (belly crawl under barbed wire 18 in.

off the ground)• Grease Monkey (Monkey bars over a mud pool)• Hell’s Bells (12 55 gal. drums hung from trees and

swinging only inches apart)• Cargo Climb (12 ft. high cargo net on a frame)• Shrinkage (ice, water and gasping)• Trip Wire (rope 18 in. off the ground the runners

have to high step over)• The Shower (goodbye contacts. High powered

snow making machine)• Hay This is Fun (runners will climb over stacks of

large round hay bales)• Mud Slide (60 ft. inflatable water slide with a

huge mud pit at the bottom)• Cargo Nasty (More cargo net climbing)• Cliff Hanging (climb up and over three walls.

Don’t look down)• Stop-Drop- & Roll (leap over trenches of fire)For more information, call 800/245-2809 or visit

www.felling.com.(This story also can be found on Construction

Equipment Guide’s Web site at www.constructionequip-

mentguide.com.)

Thirty-one Felling Trailers employees accepted and participatedin the Mudman challenge at Powder Ridge Ski Area in Kimball,Minn., on Aug. 17.

The Felling Trailer employees were still smiling— despite the mud — at the end of the obstaclecourse.

Henderson’s BlackBelt Maxx Ideal for Municipalities Municipalities utilize a number

of truck body styles and equipmentfor material hauling and snow andice control duties. Combinationbodies have come closest to deliv-ering a single body style capable ofdoing it all and being relied uponas an all-season body. Yet, all ofthese body styles (including com-bination bodies) encounter limita-tions of some sort.Henderson Products Inc.’s

BlackBelt Maxx is a new class ofwork truck body, the first true“Universal Body,” according to themanufacturer.The BlackBelt Maxx’s capabili-

ties include: anti-ice applications,deicing applications, pre-wetapplications, salt slurry generation,material hauling and high volumematerial conveying, perfect forfeeding asphalt pavers or for shoul-dering projects.The unit handles salt, sand,

gravel, medium sized rock,asphalt, snow, leaves, dirt, ash,mulch and much more.The BlackBelt Maxx’s features

include: load sense belt tensioning,

54 in. (137 cm) wide pure beltdesign (no chain maintenance),planetary drive system (providing75 percent roller-to-belt engage-ment), low working center of grav-ity (no hoist, avoiding interferencewith all overhead obstacles), steep71 degree sloped side walls (mate-rial rests on the floor, not on theside walls), high capacity hopper,high capacity anti-ice liquid tanks,high volume material output, con-trolled load management and thesystem is available in 10 to 18 ft. (3and 5.5 m) body lengths.And finally, the BlackBelt Maxx

expands Henderson’s growinglineup of green products with itsanti-ice applications, deicing appli-cations, pre-wet applications, saltslurry generation, precision materi-al placement and multi-taskingcapabilities. For more information, call

563/927-2828 or visit www.hen-dersonproducts.com.




mentguide.com.)The BlackBelt Maxx’s capabilities include: anti-ice applications, deicing applications, pre-wet appli-cations, salt slurry generation, material hauling and high volume material conveying.



www.ZipsTransportEquipment.com

Smartphone UsersVisit Us Online

(877) 343-5319

TrailMax FWTD-70-PR8 degree load angle with 33" deck height

XL Specialized XL-70-HDG13HP Honda Motor with aluminum pullouts

Smart Body SBMT Construction Service BodyModular, Extra Large Toolboxes, Gooseneck Ball,Transfer Tank, Aluminum Deck, Customizable

Excellent for Pavers!

HydraulicDetachableGooseneck

See Us at ICUEE

Booth# N1017

JEFF BELZER’SDodge Ram Tough

Vehicles ready for work at a moment’s notice. Professionals trained to keep business owners happy. Service facilities equipped for commercial applications.

COMMERCIAL HEADQUARTERSJeff Belzer Ram Dodge, 21111 Cedar Ave., Lakeville, MN

Please Call the Commercial Dept, 1-877-671-8226 OR 952-469-4444All Rebates & Incentives to Dealer, Must Qualify for Same, Prices Subject to Change

George Miller [email protected]

John Zadurski [email protected]

Gas-2500, Ready for Plow 2012 Ram 5500 4x4, 84” c/a, Sno-prep, Power Group, From $42,999

2 ram 5500 4x4 108 c/a.please call for spec

Deuce Two-Way Dump BodyFrom Crysteel Manufacturing

The Deuce two-way dumpbody from CrysteelManufacturing Inc. doubles worktruck efficiency by combiningrear dumping and side dumpingin one body. The design allowsoperators to dump to the rear fortypical applications, as well as tothe side for those hard to reachplaces. The Deuce is available in 9 and

11-ft. (2.7 and 3.3 m) lengths andis equipped with the Lo-Boy dou-ble acting hoist with a capacity upto 11 tons (10 t). Standard fea-tures include a quick-drop tail-gate, dump-thru driver’s side orpassenger’s side gate with a foldon the opposite side and integrat-ed tarp brackets. The Deuce is available in high

tensile steel and stainless steeland all Deuce bodies featureCrysteel’s five-year warranty. For more information,

call 800/533-0494 or visitwww.crysteel.com.

The Deuce is available in 9 and 11-ft. (2.7 and 3.3m) lengths and is equipped with the Lo-Boy doubleacting hoist with a capacity up to 11 tons (10 t).


Vermeer Sales & Service

1675 126th St. WestBurnsville, MN 55337

952-890-6144Fax: 952-882-2980

www.vermeerofminnesota.com

Midwest Trailers Plus, Inc.548 29th St. West

Des Moines, IA 50265515-223-8463

Toll Free: 888-560-2787Fax: 515-223-6446

www.midwesttrailersplus.com

Farm-Rite Equipment Inc.

901 Parker Ave WestPO Box 26

Dassel, MN 55325320-275-2737

Toll Free: 888-679-4857www.farmriteequip.com

K.C. Bobcat2209 W. 40 Highway

Blue Springs, MO 64015800-697-4228816-229-7631

Olathe, KS800-598-4228Platte City, MO800-984-3001

McCann Industries, Inc.

Addison543 South Rohlwing Road

Addison, IL 60101630-627-0000 • Fax: 630-627-8711

Bolingbrook250 East Frontage RoadBolingbrook, IL 60440

630-739-7770 • Fax: 630-739-7699Chicago

2350 South Laflin StreetChicago, IL 60608

312-942-9200 • Fax: 312-421-3502Crestwood

4701 West 137th StreetCrestwood, IL 60445

708-597-3110 • Fax: 708-597-9945

McHenry4102 W. Crystal Lake Road

McHenry, IL 60050815-385-0420 • Fax: 815-385-2975

Schererville1133 Indianapolis Boulevard

Schererville, IN 46375219-865-6545 • Fax: 219-865-0269

Wauconda1360 North Rand Road

Wauconda, IL 60084847-526-9444 • Fax: 847-526-9448

www.McCannOnline.com

Titan MachineryShakopee Division

6340 Hwy 101Shakopee, MN 55379

952-445-5400 • 800-795-9274Fax: 952-445-0365Duluth Division4311 Haines Rd.

Hermantown, MN 55811218-727-3038 • 800-795-0117

Fax: 218-727-2827Rogers Division

14375 James Rd.Rogers, MN 55374

763-428-5099 • Fax: 763-428-5051Industrial Division

N1626 Wuensch Rd.LaCrosse, WI 54601

608-788-1025 • 800-780-1025Fax: 608-788-1027


Tom Tenseth of Bruckner TruckSales of Fort Worth, Texas, earned theright to be top bulldog as the winner ofthe 2013 Mack Trucks Walk theBulldog competition.Walk the Bulldog features Mack

sales professionals from across theUnited States competing to determinewho most effectively presents theMack total value proposition. Duringthe championship, Mack sales profes-sionals conducted a truck “walka-round,” a hands-on presentation of theMack Granite model to a customer.Competitors were judged on how wellthey communicated product featuresand benefits based on customerrequirements, as well as the service andsupport solutions offered under theMack Pedigree Uptime Protection pro-gram.“Walk the Bulldog is one way we

recognize the knowledge and customerfocus of Mack sales professionals,”said John Walsh, Mack vice presidentof marketing. “Our dealers and sales

teams are first in line to help customersget the best truck for the job they needto do, backing that up with service andsupport throughout the ownershipexperience. This competition showswhat it takes to make that happen.” Tenseth, who placed third at last

year’s competition, started atBruckner’s as a truck technician in1995 and began selling Mack trucks in1999. Stephen Cline, of BrucknerTruck Sales of Oklahoma City, placedsecond in the competition. Bill Gross,of W.W. Engine & Supply inHarrisburg, Pa., finished third.

Twelve sales professionals compet-ed in the third annual competition, allof whom were top finishers at regionalcompetitions. One hundred and eightsales professionals participated overall,providing an interactive way to honetheir skills and deepen their knowledgeof Mack products and services.For more information, visit

www.macktrucks.com.(This story also can be found on



guide.com.)

Tom Tenseth of Bruckner Truck Sales of Fort Worth,Texas, takes top honors at the Mack Trucks 2013 Walkthe Bulldog competition.

“Our dealers and sales teams are first in line to helpcustomers get the best truck for the job they need todo, backing that up with service and supportthroughout the ownership experience.”

John WalshMack Trucks

Mack Trucks Selects Top Bulldog inAnnual Walk the Bulldog Competition

Terex Offers Special Lease Terms on Generation 9 TrucksTerex Construction has intro-

duced affordable lease options tocustomers on its TA300 andTA400 models of Generation 9articulated trucks. The new TerexGen 9 articulated truck lease pro-gram features low monthly pay-ments, no money down, with theoption to refinance at the end of theinitial lease period or lease a newTerex articulated truck. The pro-gram will run until March 31,2013, in North America. “Because of the uncertainty

within the construction industry,end-users are reluctant to makelong-term buying commitments inorder to conserve cash flow,” saidJohn Poag, director of sales, TerexConstruction. “To help keep theirequipment acquisition optionsopen, as well as to allow them flex-ibility in an uncertain economy, wedesigned this truck lease programso customers can get the equip-ment they need while improvingtheir cash flow without beinglocked into payments or terms thatare tough on their bottom line.” Features of the new Terex Gen 9

articulated truck lease programinclude no money down, lowmonthly payments, the ability toreturn or sell the trucks at the endof the lease terms. This benefitscustomers with a lower capitalinvestment compared to buying, anaffordable way to keep newerproducts in an equipment fleet andcould yield significant tax advan-tages based on recent changes intax regulations. Customers shouldconsult their tax professionals formore information.Low cost of ownership is a key

feature of Terex TA300 and TA400articulated haulers. Engineered toexcel in the toughest applicationsaround the world, Terex Gen 9articulated trucks are designed tokeep productivity levels high, fuelconsumption low and cycle timesshort, according to the manufactur-er. With a maximum payload of 30

tons (27 t), a body dump cycle timeof 20 seconds and a 22.9-cu. yd.(17.5 cu m) heaped capacity body,customers will benefit from lowcost-per-ton per hour when mov-

ing material with the Terex TA300articulated truck. Powered by aTier IV interim compliant ScaniaDC9 370-hp (276 kW) engine, theTA300 is equipped with a ZF fullyautomatic with manual overridetransmission and retarder, with sixforward gears and three reversegears. It has a maximum torque of1,309 lb.-ft. at 1,400 rpm, andwhen coupled with the 100 percentdifferential locking action, this per-

formance gives the truck excellentpulling power and significant trac-tion advantage. An independentfront suspension (IFS) systemcomes standard on the TA300, pro-viding a smooth ride when travel-ing over rough terrain and makingit easier to handle while increasingproductivity. Boasting a 444 hp (331 kW)

Tier IV interim compliant ScaniaDC13 engine, the powerful TA400

has a maximum payload of 41.9tons (38 t) and a heaped capacity of30.3 cu. yds. (23 cu m). With an,emissions-compliant diesel engineoffering maximum torque of 1,548ft.-lb. at 1,350 rpm, coupled to afully automatic Allison transmis-sion through a two-speed drop box,the TA400 provides both excep-tional rim-pull and high-speedcapabilities, according to the man-ufacturer. The TA400 also is equipped

with dual retarder systems, a trans-mission retarder and exhaustbrake, giving operators increasedcontrol in loaded, downhill hauls.Engineered with a permanent all-wheel-drive (6x6) driveline andequalizing rear suspension, theTA400 also offers enhanced trac-tion capabilities. A four-bar trailingarm suspension system contributesto this truck’s ride quality, allowingoperators to travel quickly andcomfortably on difficult terrain.




mentguide.com.)

Features of the new Terex Gen 9 articulated truck lease programinclude no money down, low monthly payments, the ability toreturn or sell the trucks at the end of the lease terms.



ASPHALT EQUIPMENT

Asphalt Cutters

SEVERE SERVICE HIGH SPEED

ASPHALT CUTTER

Skid-Steers, TLB, Loaders,Excavators.14 Models

24 Hour ShippingRebuilds for competitors’

model!

[email protected] 218-863-

6444

COMPACTION EQUIP.

Pneumatic Rollers

1994 Ingersoll-Rand PT125, 9wheel pneumatic roller, verygood condition, 975hours..........................$25,000.

918-272-7237

EXCAVATORS

Hydraulic Excavators

2006 Hyundai R500LC7AShear hydraulics installed, 66''Bucket available, good condi-tion............................$139,500.

440-439-4000

LOADERS

Crawler Loaders

1995 Caterpillar 963B, A/C,

22'' Tracks, GP Bucket, good

condition, 9500

hours...........................$49,500.

913-371-3822

Skid Steer Loaders

2004-2006 GEHL CTL, 20+

CTL in stock, Clearance pricing,

used condition, low hours..........

.......................Call for pricing.

219-977-4210

2006 John Deere CT332,

Compact Track Loader, Foot &

Hand controls, good condition,

1443 hours..................$29,500.

402-467-1300

Wheel Loaders

1995 Dresser 518, Cab A/C,

GP Bucket, good conditon,

12,450 hours...............$34,500.

913-915-1607

2008 Kawasaki 70Z V-2, JRB

3.0 Cyd, GP Bucket, new

tires/paint, used condition, 1885

hours.........................$122,000.

219-977-4210

2007 LIEBHERR L580, 5.7

Yard bucket, good condition,

3494 hours................$245,000.

440-439-4000

MOTOR GRADERS

Graders

2005 John Deere 770D, 14'

Blade, 14.00x24 tires, A/C,

good condition, 4271

hours.........................$145,000.

402-467-1300

RECYCLING EQUIPMENT

Crushing

2007 Screen Machine 5256T,

Large Portable Track Crusher,

52''x56'' Rotor, good condition,

4500 hours................$375,000.

2007 IROCK RD515, Portable

Closed Circuit Impact Crusher,

good condition, 3000 hours.......

..................................$350,000.

614-949-9296

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢.For just an additional $20 your ad can be posted on

our online searchable database for 30 daysAd runs for 2 (two) insertions - no changes in second insertion.

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to:470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200

CLASSIFIEDS

Keep Up With All the IndustryNews Subscribe to

Construction EquipmentGuide Today!

Toll Free 800/523-2200

To view our Business Calendar online, go to www.constructionequipmentguide.com.

AGC ST. LOUIS IF IT’S NEW, IT’S HERE!CONEXPO-CON/AGG will represent an immense unveiling of all the newestequipment, technology and product breakthrough in construction. From earth-shaking big iron to groundbreaking innovations, it’s all assembled in one placeto help you work smarter. CONEXPO-CON/AGG 2014 – If it’s new, it’s here!

CONEXPO – CON/AGG 2014 – if it’s new, it’s here!MARCH 4 thru 8, 2014LAS VEGAS, NEVADA USA

LAS VEGAS CONVENTION CENTER

CONEXPO-CON/AGG 2014 WILL FEATURE:. 2,400 exhibitors showcasing new products and technologies from forevery major construction industry including asphalt, aggregates, concrete,earthmoving, lifting, mining, utilities and more.. Over 130,000 attendees that range from contractors, to dealers & distrib-utors, to service providers, engineers, producers, municipalities, and more. . A comprehensive education program during the five-day exposition withsessions emphasizing industry issues and trends, management and appliedtechnology.

For more information, please contact AGC of St. Louis, 6330 KnoxIndustrial Drive, Suite 200, St. Louis, MO - Phone: 314/781-2356; Fax:314/781-2874.

IOGA, WEST VA (INDEPENDENT OIL & GAS ASSOCIATION)SEPTEMBER 17 thru 19, 2013 - FARM SCIENCE REVIEW.Farm Science Review@OhioStateFSR. If your business is agricultural, our business is you! Please contact Leslie Risch, Program Assistant at 614/292-4278 for more infor-mation on this program.

Construction Leadership Council (CLC) National Fall Working Weekendsponsored by AGC ST. LOUIS - September 12 thru 14, 2013, St. Louis,MO. AGC of St. Louis and AGC of America are pleased to be co-spon-soring the 2013 CLC National Working Weekend. Join us at the HiltonSt. Louis at the Ballpark. The event includes professional developmentsessions, a jobsite tour, and networking events, all designed to help AGCof America’s mid-career professionals get connected and share best prac-tices. You do not have to be a member of a CLC (or YCF) group to jointhis event. To register, please go tohttps://events.agc.org/Event/index/CLCFWW13 or contact AGC of St.Louis directly.

GRAND OPENING CELEBRATES NEW STATE-OF-THE-ART FACILITY:GENERAL EQUIPMENT & SUPPLIES, INC. – OPEN HOUSE!!!SEPTEMBER 19, 2013 (11:00 AM to 8:00 PM). Location: 3500 AppleCreek Road, Bismarck, ND (2 miles South of Exit 161 off I-94). PHONE:701/223-9700. . Tour our new state-of-the-art facility. View our large equipment display. Register for door prizes & giveaways. Food & beverages served throughout the dayFor more information, please contact Amanda McKinnon at 701/371-8369.

AGC of MinnesotaFall Member Meeting in Rochester on September 19, 2013.Online Registration Now Available! Please go to:http://www.agcmn.org/event/FallQuarterly and click Register. Questions?Contact Julie Moore at [email protected] or 651/796-2189.

AGC of MinnesotaSRI and Lifetime Achievement Awards deadline for submitting nominations isSeptember 23, 2013.Is there someone you work with who personifies the attributes of Skill,Responsibility and Integrity? Or whose outstanding contributions to the industryover an extensive career might earn them recognition with the LifetimeAchievement Award? Nominations are now being accepted for the 2012 SRIand Lifetime Achievement Awards, to be presented at the Annual Meeting at theRadisson Blu Mall of America on November 20, 2013.

AGC of MinnesotaBarb’s Benefit OKTOBERFEST – SAVE THE DATE!!!When? Saturday, September 28th, 2013Time? 4:00 PM to 11:00 PM (4:00 to 7:00 family focused activities)Where? Croatian Hall – 445 2nd Avenue S, South St. Paul, MN 55075This benefit is in honor of Barb Lau, Executive Director of the Association ofWomen Contractors, who has suffered an aggressive type of cancer treat-ment/chemotherapy. Her treatment team suggests she waits another 6 monthsto undergo reconstruction surgery. Funds raised for Barb’s Benefit – Oktoberfestcelebration will go towards Barb’s Medical Expenses. Contact Christa Seabergfor more details at [email protected]. You may also contact the AGCof Minnesota office at 800/552-7670 or 651/632-8929 for more information.

AGC of MinnesotaSupervisory Training Program – September to October 2013 Classes Four of Ten Supervisory Training Program (STP) courses from AGC of Americaare being offered in the evenings, from 5:00 to 8:00 PM, at the AGC ofMinnesota office at 525 Park Street, Suite 110, Capitol Office Building, St. Paul.These courses typically run 5 to 7 weeks (one day a week). Free parking isavailable adjacent to the building. For more information on the AGC of Minnesota Supervisory Training Program,please contact Pat Lynch at 651/796-2181 or 800/552-7670, ext. 201.Email: [email protected].

AGC of MinnesotaConstruction HR and Training Professionals Conference to be held October 16-17 at the Millennium Knickerbocker Hotel Chicago. The conference will pro-vide two days of unique opportunities for construction industry HR, training, andworkforce development professionals. Registration information is available athttp://www.agc.org/cs/events/conferences/training_education_conference. Theregistration fee increases September 1, so register today! You may also contactthe AGC of Minnesota office at 800/552-7670 or 651/632-8929 for more infor-mation.

Minnesota Nursery & Landscape AssociationAmerican Horticultural Therapy Association Annual Conference. September 20, 2013 to September 21, 2013Time: All DayLocation: The Commons Hotel, 615 Washington Ave., SE, Minneapolis, MN Celebrating AHTA’s 40th AnniversaryThis year’s anniversary celebration will feature past AHTA presidents and lumi-

naries from the field, as well as a host of international presenters who will dis-cuss their research, practices and the future of horticultural therapy. For moreinformation, please contact the MNLA office phone at 651/633-4987; Toll Free:888/886-6652 or email [email protected]; Fax: 651/633-4986; Toll Free Fax:888/266-4986.

Minnesota Nursery & Landscape Association2013 Irrigation Show & Education Conference – Austin, Texas November 4, 2013 to November 7, 2013Time: All DayLocation: Austin Convention Center, Austin, TexasWhere Irrigation Meets InnovationWhat better place to think about changing things up than in Austin, Texas? Aplace to be different and stand out from the crowd. A place where energy andcreativity run high and diverse ideas come together. This year’s show is the placeto uncover opportunity, launch new ideas, up your game and have fun! Formore information, please contact the MNLA office phone at 651/633-4987; TollFree: 888/886-6652 or email [email protected]; Fax: 651/633-4986; Toll FreeFax: 888/266-4986.

CONSTRUCTION ASSOCIATION OF MICHIGAN (CAM) GOLF SEASON is JUST AROUND THE CORNER !!! Be sure to mark your calendars for these upcoming CAM GOLF OUTINGS. September 23 – Plum Hollow Country Club, Southfield, Michigan“Old Timers Classic” - $135 per person. Package includes complimentary driv-ing range; 18 holes of golf with cart; grilled lunch on the course; beverage serv-ice on the course; dinner with open bar; awards and door prizes. For more information, please contact Diana Brown at (248) 972-1000.

NCI Building Systems – Seminar, September 24 – 26, 2013 Houston, Texas, NCI Building Systems will host a three-day conference in theIllinois area to educate metal construction contractors and professionals on howto install insulated metal panels (MP) with a focus on NCI’s specific products.The first day of the seminar is Tuesday, September 24, and concludes onThursday, September 26. The seminar will be held at the NCI Training Center(7313 Fairview Street, Houston, TX 77064) with start time each day of 8 AM.NCI Building Systems is committed to providing the highest standard of steelconstruction solutions in the world. To register for this event, or for more infor-mation, you may call 281/445-8555, ext. 28087.

The International Bridge, Tunnel and Turnpike Association (IBTTA) – theworldwide association representing toll facility owners and operators andbusinesses that serve them, today announced the full agenda and list ofspeakers for their 81st Annual Meeting to be held September 22 to 25 inVancouver, British Columbia. This year’s 2013 meeting, MovingSmarter: How Tolling meets the Challenge, will feature a keynote addressfrom Daniel Sieberg, Head of Media Outreach for Google, and specialpresentation from Bryan Norcross, Senior Hurricane Specialist for TheWeather Channel. “Vancouver is the perfect place to meet,” stated RobHorr, President IBTTA and Executive Director of the Thousand IslandsBridge Authority in New York. “The city is an efficient, increasingly inte-grated transportation system that stands as a model for other communi-ties around the globe.” IBTTA’s 81st Annual Meeting and Exhibition is host-ed by the Transportation Investment Corporation (TI Corp), BritishColumbia’s Crown Corporation responsible for the Port Mann/Highway 1Improvement Project. You may contact Brad Luna, Luna Eisenia Mediaat 202/812-8140 (mobile) for more information or visit: www.IBTTA.org.

ICUEE, the International Construction and Utility Equipment Exposition is alsoknown as The Demo Expo, and is the exposition for demonstrations of con-struction and utility equipment. At ICUEE, attendees can operate the equipmentthemselves and explore the newest products and innovations in the industry.The broad spectrum of equipment available to operate is the ultimate in com-petitive comparisons. An extensive education program complements displays ofthe latest equipment technology and product innovations. ICUEE 2013 will beheld October 1 thru 3, 2013 at the Kentucky Fair & Exposition Center, 937Phillips Lane, Louisville, Kentucky, USA. For more information on this Expo youmay contact Jim Wurm, Executive Director of Exhibit & Event MarketersAssociation, at 541/317-8768.

PAUL BUNYAN SHOW – the official Paul Bunyan Show is one of the nation’slargest and oldest forest industry shows. Show attendees will see more than130 exhibits representing all facets of the forest industry throughout NorthAmerica. Representatives will be on site to showcase equipment, manpowerand the dedication that has made the industry what it is today. Lumberjackentertainment and competitions will take place throughout the weekend as wellas numerous educational sessions on topics ranging from logging equipmentsafety and maintenance to the history and restoration of the bald eagle in Ohioto Ohio’s edible mushrooms. Visitors to the show will not want to leave withouttrying an official Bunyan Burger, a 14 oz. angus burger with all the trimmings.For more information, visit www.ohioforest.org. WHEN: OCTOBER 4 thru 6, 2013Friday-Saturday 8:00 AM to 6:00 PM; Sunday 9:00 AM to 3:00 PMLOCATION: (Map It) Guernsey County Fairgrounds at 335 Old National Roadin (Old Washington) Cambridge, OH (Exit 186 off of I-70). PHONE: 614/497-9580

19th Annual New York State Highway and Public Works Expo will be held onOctober 16, 2013 in the Americraft Center of Progress at the New York StateFairgrounds in Syracuse, NY. Free admission tickets are sent to every village,city, town, county and state highway and public works professional in New YorkState. Exhibitors from around the state and the nation will gather in Syracuse forthe annual Expo that puts them face to face with municipal budget decision mak-ers. Superintendents, Board Members, Engineers, MunicipalContractors…they’re all at the Expo! The Expo is held at the peak of the annu-al budget decision making process in municipalities across the state…A greattime to showcase what you sell, make new contacts, introduce new productsand strengthen relationships with your existing municipal customers!

GIE+EXPO – The Green Industry & Equipment ExpoDealer Day: October 23, 2013All Attendees: October 24 and 25, 2013Kentucky Expo CenterLouisville, KentuckyTwo Tradeshows – GIE+EXPO and Hardscape North America – co-located inone central location, provide your No. 1 opportunity to see what your industryis buzzing about. The 29-acre Outdoor Demonstration Area, within easy walk-ing distance of the indoor exhibits, and the New Products Showcase makethese prestigious shows an exceptionally efficient, productive marketplace. The 2012 GIE+EXPO runs October 24 & 25 in Louisville, KY. Co-locatedagain this year with Hardscape North America, the industry’s largest tradeshow will host more than 15,000 attendees. For details on education ses-sions, produce demonstration schedules and to register, visit www.gie-expo.com or www.HardscapeNA.com.

Ohio Aggregates & Industrial Minerals AssociationOAIMA Annual Meeting 2013November 14 and 15, 2013, Columbus Hilton at Easton, Columbus, OhioFor more information on this meeting, please call toll free: 800/OH-ROCKS(647-6257) Phone: 614/428-7954 Fax: 614/428-7919 Email:[email protected].

BusinessCalendar



The Easy Way To Advertise Your EquipmentValued At Less Than $1 Million Run In TwoConsecutive Issues For $95, Color Ad $145

2007 Kobelco SK480LC, 6798 Hrs.........$115,000Call David at 219-696-5680

2006 Mustang 3803ZT Zero Turn, 1591 Hrs, 12”,18” & 24” buckets, tracks are new................$27,370

Call Tim 630-665-5600 19-20 JM

1991 John Deere 300D, S/N 775834, OpenROPS..........................................................$19,000Call 502/456-4050 Ask for Melissa or Albert 18-19 EB

19-20 JM

JCB 155, Only 20 Hrs, Cab, Heat, A/C, 2 Speed ........................................................................$29,500

Call Dan 612-306-4496 18-19 PK

New Compact Excavators ....Starting at $41,000Call Dan 612-306-4496 18-19 PK

2007 Kobelco SK290LC-LR, s/n YQ13U5369,4390 Hrs, 62’ Long Reach........................$135,000

Call David 219-696-5680 19-20 JM

2010 Bobcat T650 CTL, Open Cab, 890 Hrs, Std Controls E/N1059188..........................................................................$39,850

800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Tulsa, OK 18-19 JM

2011 Bobcat S185 A91, Enclosed Cab, Heat, A/C,Suspension Seat, Power BobTach, HighFlow, 2 Speed, 156Hrs, E/N 1049733......................................................$33,000

800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Garden City, KS 19-20 JM

2007 New Holland C190, 3241 Hrs, 81 HP, Cab w/Heat,2900# Capacity, 2 Speed, Cold Start, 9950 Lbs........$23,400

Call Steve Samosky • 262/373-2151 19-20 JM

“TRACKS FOR YOUR MACHINE!!” $7,000,000 Inventory of High-QualityRubber Tracks to fit over 3000 models of construction equip. PNEUMATICAND FLATPROOF SKIDSTEER TIRES also available. $95 Next day ship-ping to 23 states...........................................................................................Call

Summit Supply LLC888-888-1248 • [email protected] 19-20 TM

2007 New Holland L190, 2300 Hrs, 78” Bkt, 90 HP, 2Speed, Cab, 2800# Capacity, 7765 Lbs.....................$23,400


2011 Bobcat 5610 UTV Turbo Toolcat Work Machine, 110 hrs,E/N 1044023 ..................................................................$47,500

800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Wichita, KS 19-20 JM

2005 Gehl 603, Only 504 hrs!, AC, heat 2 spd, patternchngr, blade, 69 hp, 12,600 lbs, straight & clean, exclnt.Serviced & ready to work ................Special Price - $39,500

Jay 319-504-6834 19-20 PK

2010 Bobcat S150 Skid Steer Loader, 120 Hrs, EnclosedCab, Heat 6 Mo. Driveline Warranty, New Tooth Bkt

Glenn Engels 316-641-4896 • Wichita, KS 19-20 JM

1993 Grove Rt 422,22 Ton S/N # 78334,Cummins 4 Cyl12,100 Hours, 3Speed Transmission,27’-70’ Main Boom,25’-43’ Jib, AuxilliaryHoist,17.5 X 25 Tires,Ball, New Rotec,Boom Scope CylinderRebuilt, Fresh GrovePaint, Cleveland Ohio

Call Andy 216-316-1511

18-19 EB

1981 Grove Rt 755, 55 Ton S/N # 49225,Cummins Rebuilt, 110’ Main Boom, 32’ Jib,

Auxilliary Hoist, 5 Sheave Block, Cleveland OhioCall Andy 216-316-1511 18-19 EB

1998 Case 590SL, s/n JJG0210709, 8150 Hrs,Cab w/Heat, 2L Controls, Ext Hoe, Ride Control,24” Trench Bkt, 93” Front Bkt .....................$28,900

Call Mario 630-878-8396 18-19 JM

2006 I-R SD-45D, 400 hrs, 54” smooth drum, drum drive,10,600#.....................................................................$32,500


1994 Case 721B, s/n JEE0039571, 6250 Hrs, Cabw/Heat, Pro 1000 ACS Coupler w/2.75 Yd Bkt.............................................................................$31,500

Call Ray 630-878-8810 18-19 JM

2005 Mustang 6003, 1665 Hrs, 18”, 24” & 36”buckets, dozer blade, excellent condition ...$40,000

Call Tim 630-665-5600 19-20 JM


The Easy Way To Advertise Your EquipmentValued At Less Than $1 Million Run In TwoConsecutive Issues For $95

Here's how the BARGAIN ADS Work:

• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.

• Either email your copy & photo to: [email protected], or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.

• Cost is $95 per ad, $50 additional for color.

• Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States.

For more information, call Construction Equipment Guide today at 800/523-2200

Next Issue ClosesSeptember 19th

SEE YOUR BARGAIN AD INCOLOR

ONLY $50 EXTRA FOR TWO INSERTIONS

2010 Wacker 3001 Dumper, 97 Hrs, 4WD, Swivel,Articulated, 2.3 Yd, 6,600# Capacity .........................$29,300


2006 Case CX210, s/n DAC213006, 5060 Hrs,18’8” Boom Arm, 7’10”, Shoe 3-Bar Steel 24”,Control Pattern Valve, Dbl Acting Aux Hyd, Coupler....................................................................$82,000

Call Mark 630-739-7770

2010 Gehl V270 Vertical Lift Skid Loader, Like New,One Owner, 785 Hrs, OROPS, ISO Joystick Controls,74” 22.8 Cu. Ft. HD Bkt, Custom Radiator Guard,Super Nice Machine! .......................................$32,000

Call George 219-696-8911 19-20 JM

19-20 JM

2005 Cat 287B, 1,485 hrs, OROPS, 82 hp, 10,300 lbs, 80”bkt, 2,520# capacity ..................................................$23,400

Call Steve Samosky • 262/373-2151

2005 Mustang 2099 Skid Steer, s/n H00102504,4205 Hrs, 86 HP Perkins Engine, Open ROPS, Hand/Foot Controls, High Flow Aux, 384” Tooth Bkt $18,500

Call George 219-696-8911 19-20 JM

19-20 JM

2009 New Holland L185, 1,900 hrs, 72” bucket, cab, heat, 2 speed, 2,500# capacity, 82 hp, 7,100 lbs...............$24,400

Call Steve Samosky • 262/373-2151

Cat 938G, EROPS, AC, QC, Bkt and Forks,%0%+Tires .................................................$54,500

Courts Machinery • 507/678-2752 19-20 PK

19-20 JM


Project First Proposed Four Years Ago for $200 Milliontransmission company in the country. Our subsidiaryITC Great Plains LLC is a transmission-only utilitywith authority to construct, own, operate and main-tain a regulated, high-voltage transmission system inthe Southwest Power Pool region,” said Joe Kirik,senior capital communications specialist, ITCHoldings Corporation.Work on Phase I of the Spearville-Axtell line,

from Spearville to Post Rock, began in October2010. Construction, testing, and commissioning ofPhase I was completed in June 2012, and Phase IIfrom Post Rock to Nebraska was completed andwent into service in December 2012.The project was first proposed more than four

years ago with an estimated cost of $200 million.However, Kirik pointed out, “the latest cost estimatewe have released for the Great Plains portions of theline, that is from Spearville to Post Rock to theNebraska border or approximately 174 miles(Phases I and II) is $160 million, although this is notnecessarily the final figure.” In addition, constructioncosts are $25 million less than last year’s recalculat-ed figures submitted to regulators.“A total of approximately 130 personnel were

employed over the course of the project. Peakemployment at any one time was approximately 80skilled tradesmen constructing the line (foundations,poles, conductor stringing), plus additional skilledtrades constructing the Post Rock substation nearHays, Kansas, and the expansion at Spearville,Kansas, substation. These varied in number as con-struction progressed, peaking at around 20,” saidKirik.A variety of equipment was utilized on the job.

The two most commonly used cranes were 40 and45 ton (36 and 41 t) National cranes on the line con-struction work. The equipment fleet also includedNational and Altec boom trucks, an IMT 230 drill rigused for foundation work, and a Caterpillar C85Challenger that transported trailers and equipmenton the construction right of way.Specialized equipment for construction of the

transmission line included a Morgan Puller 20,000-lb. (9,071 kg) 3 drum wire puller and a WagnerSmith Hydraulic Bundle Tensioner, both used forinstalling conductors (stringing wires). A Valmont

hydraulic jack model #1013 R2 was used to matepole segments together.Subcontractors working on the job included Black

& Veatch, which provided construction managementand construction inspection services. MYRTransmission Services was responsible for poleassembly and erection, conductor stringing, and sub-station construction, and their subcontractorAldridge handled construction of pole foundations.Power Test Engineering carried out substation test-ing and commissioning.Good weather allowed the second phase, the 85

mi. (137 km) segment from Post Rock to theNebraska border, to be completed six months aheadof schedule.


tionequipmentguide.com.) CEG

The Nebraska Public Power District is respon-sible for the Nebraska segment from theKansas-Nebraska border north to Axtell, a dis-tance of approximately 53 mi. (85 km).

A variety of equipment was utilized on the job. The two most com-monly used cranes were 40 and 45 ton (36 and 41 t) National craneson the line construction work.

The project was first proposed more than four yearsago with an estimated cost of $200 million.

KETA from page 1


TELE HANDLER 540 170 & JCB SITEMASTERCONTACT: JALAL AHMEDPHONE: 00971505536398EMAIL: [email protected]––––––––––––––––––––––––––––––––POWER CURBER 5700 B OR C | HI IWANT TO BUY URGENTLY USEDBOWER CURBER 5700 B OR C IN GOODCONDITION WITH AFFORDABLE PRICEC.I.F IRAQCONTACT: ENG.IMADPHONE: +9647711232323EMAIL: [email protected]––––––––––––––––––––––––––––––––UNDERCARRIAGE PARTS | HITACHI EX400LC RAIL/ CHAINS, SPROCKETS, &ROLLERS PLEASE RETURN EMAILPHOTOS & DESCRIPTION OF PARTSYOU HAVE.CONTACT: CLIFFPHONE: 7247364546EMAIL:[email protected]––––––––––––––––––––––––––––––––"KOMATSU" MOBILE CRUSHERBR350JG1E | "KOMATSU" MOBILECRUSHER BR200, BR310, BR350JG-1ECONTACT: K.NAKAPHONE: 06-6754-4570FAX: 06-6972-7515EMAIL: [email protected]|––––––––––––––––––––––––––––––––DYNAPAC CC142 | DYNAPAC ROLLER52" DRUMCONTACT: PAULPHONE: 5167902272EMAIL:[email protected]––––––––––––––––––––––––––––––––LOADERS, EXCAVATORS | DESCRIBEWHAT YOU WANT.CONTACT: IRFAN SIDDIQUIPHONE: 09822566205EMAIL:[email protected]––––––––––––––––––––––––––––––––TYPE OF EQUIPMENT WANTED | CAT920, 930, 950 , 950B, 950D HITACHIEX400-1, 200-1, UH83, UH07-7CONTACT: MUHAMMAD DAWOODPHONE: 3013388999FAX: 3016326405EMAIL:[email protected]––––––––––––––––––––––––––––––––RUBBER TIRED BACKHOE | RUBBERTIRED BACKHOE W/4N1 FRONT BUCK-ET REAR BUCKET W/THUMBCONTACT: WILLIAM CARTERPHONE: 910 7139072EMAIL:[email protected]––––––––––––––––––––––––––––––––KOMATSU BR380JG1 TRACK JAW |LATE MODEL LOW HOUR US LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––

JCB3CX | JCB3 CX OR 4 CX .2000HOURS IN EUROPE, GOOD SHAPE.CONTACT: LUBEN RABCHEVPHONE: 359 899 76 70 50FAX: 702 616 8374 |EMAIL:[email protected]––––––––––––––––––––––––––––––––FORD F800 83 CUMMINS DIESEL 10SPEED | LOOKING FOR THE 8.3 ANDHAS TO BE A MANUAL WITH THE 2SPEED AXLE. MANUAL 5 OR 6 SPEED.6 SPEED WOULD BE BEST.CONTACT: MITCHELL VAN LANNENPHONE: 715-304-6638EMAIL:[email protected]––––––––––––––––––––––––––––––––WANTED | NEED URGENT MOTORGRADER CHAMPION 740A 1997 TO 2000GREY CAB CLOSE TO SOUTH FLCONTACT: BLADIMIR TORREALBAPHONE: 561-628-9704EMAIL: [email protected]––––––––––––––––––––––––––––––––WE BUY EQUIPMENT MANUALS | DEARSIR / MADAM, WE ARE LOOKING TOPURCHASE NEW OR USED SERVICE,SHOP, PARTS, OPERATOR’S OR OTHERMANUALS FOR EQUIPMENT, TRUCKSAND VEHICLES OF ALL SORTS. WEPREFER IN BULK, PERHAPS YOU HAVECOMPUTERIZED YOUR SERVICE ORPARTS OPERATION AND YOU HAVEBOOKS OR MANUALS YOU NOLONGER NEED, OR INVENTORIES YOUHAVE NOT SOLD. PERHAPS AS A DIS-CONTINUED PRODUCT LINE. WE WILLPURCHASE IN ANY USEABLE CONDI-TION IN ANY AMOUNT YOU HAVE.PLEASE FEEL FREE TO CALL US AT270-849-2270 OR EMAIL US.CONTACT: GRACE FRANCESPHONE: 270-849-2270EMAIL: [email protected]––––––––––––––––––––––––––––––––WHEEL LOADERS / GRADERS / EXCA-VATORSCONTACT: SARI SALEHPHONE: 860-752-5245EMAIL: [email protected]––––––––––––––––––––––––––––––––FRONT SHOVEL EXC | O&K RH340BFRONT SHOVEL REQUIREMENTS:DIESEL (NOT ELECTRIC POWERED)VERY LOW HOURS (LESS THAN 7,500HOURS) UNADVERTISED - WHOLESALEPRICING. THANKS!CONTACT: SANTIAGOEMAIL: [email protected]––––––––––––––––––––––––––––––––WHEEL LOADER BUCKET | NEED GPBUCKET FOR CASE 721DCONTACT: PATRICK KELLYPHONE: 716-891-4311 X 2243FAX: 716-891-4311EMAIL:[email protected]––––––––––––––––––––––––––––––––

MOTOR GRADERCONTACT: FRANCISCO NAVARROPHONE: 7865186885EMAIL:[email protected]––––––––––––––––––––––––––––––––CONSTRUCTION | WANTED ANY EXCA-VATOR MARSH BUGGIES USED/NEWFOR SALE OR RENT. NEED NOW.PLEASE SEND PRICE, PICS, AND LOCA-TION TO MY EMAIL THANKSCONTACT: TYLER PALUMBOPHONE: 330-365-0654EMAIL: [email protected]––––––––––––––––––––––––––––––––CAT | I NEED CAT SKID STEER DECALSFOR A 216 CATCONTACT: SEANPHONE: 314-565-9726EMAIL: [email protected]––––––––––––––––––––––––––––––––EXCAVATOR MOUNTED PILE HAMMER |SEEKING USED EXCAVATOR MOUNTEDPILE HAMMERS. EMAIL PHOTO-GRAPHS, LOCATION AND PRICING FORQUICK REPLY.CONTACT: JEFF LAWSONPHONE: 864-542-4369EMAIL: [email protected]––––––––––––––––––––––––––––––––CATD6H WIDE TRACK | CATD6H DOZERWITH WIDE TRACKCONTACT: ERNESTPHONE: +2347038321784EMAIL: [email protected]––––––––––––––––––––––––––––––––USED OR GOOD CORE MIXER DRIVE |WE ARE LOOKING FOR ZF GEARBOXES FOR TRANSPORT MIXER(MIXER DRIV) PK 4100, PK 5100, PK5300, PK 7300, PK 6300, PK 6500 , PK7500 P 3300, P 6300, P 5300 , P 7300, P4300 , P 3301 IF YOU CAN SUPPLYPLEASE SEND US PICTURE , DETAIL &YOUR BEST SERIOUS COMPETITIVEEXPORT PRICESCONTACT: M.ASKARIPHONE: 819-246-9577FAX: 819-205-0972EMAIL:[email protected]––––––––––––––––––––––––––––––––SMALL BUCKET CRUSHER | SMALLBUCKET CRUSHER 600MM OR SMALL-ERCONTACT: IVAN FOWKESPHONE: 01509413012 MOB07706976762EMAIL:[email protected]––––––––––––––––––––––––––––––––

KOMATSU D41 TRACK DOZER | CAB,AIR, POWER ANGLE TILT BLADE. LOWHOURS, USA LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––MOTOR GRADER | JOHN DEERE JD670D COMPLETE CAB OR COMPLETEGRADERCONTACT: PETER MURRAYPHONE: +61407283980EMAIL: [email protected]––––––––––––––––––––––––––––––––

TRACTOR | MITSHUBISHI TRACTORMLV3ECONTACT: RAJENDRAPHONE: 9673466455EMAIL: [email protected]––––––––––––––––––––––––––––––––KAWASAKI LOADERS | NEED TO BUYUSED KAWASAKI WHEEL LOADERS50Z, 60Z, 65Z, 70Z, 80Z, 85Z, 90Z, 95Z,YEAR MODEL 99 - UP. EMAIL ME WITHPICTURES, SERIAL NUMBER, MACHINECONDITION & LOCATION AND OFFERPRICE.CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:[email protected]––––––––––––––––––––––––––––––––CUTTER HEAD DREDGE CONTACT: BARTON SAND AND GRAVELPHONE: 612 315 6026EMAIL: [email protected]––––––––––––––––––––––––––––––––NEED BULLDOZER D8T ENC CAB WITHS SINGLE RIPPER BLADE ANGLEUNDER 3000 HOURS USA CONTRAC-TOR ONLY I NEED 10 I/TS CLEARANGLE BLADECONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975 OR MOB 1 514 386 8975EMAIL:[email protected]––––––––––––––––––––––––––––––––NEED A 320DL EXCAVATOR WITH CAB,AIR, GP BOOM, LONG STICK, AROUND1500 HOURS. BUY FOR AROUND $140,000 THANKSCONTACT: BOB BOEDGESPHONE: 618-797-1900FAX: 618-797-1912EMAIL:[email protected]––––––––––––––––––––––––––––––––VOLVO 720726 730 GRADER | 2000 -2003 YEAR, WORK READY, US LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––BOBCATCONTACT: GEORGE CHOUKAIRPHONE: 9087051684EMAIL: [email protected]––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT | WE ARELOOKING FOR FOLLOWING USEDEQUIPMENT: 1. PC120-6, PC200-3/-6, -7,PC300-5, PC300-6, PC300-7, PC400-6 2.SK120I, II III, SK200I, II, III, SK200-6,SK300, I, II, III, SK330LC 3. EX120-1,EX200-1, EX200LC-5, EX270-1 4. D31P-20, D41E-6, D41P-6, D61EX/PX-12, ANDD61EX/PX-15 5. SAKAI 500 ROLLERS 6.CAT 12G, 12H, 140H, 160H 7. KOMATSUBR350J-1 MOBILE STONE CRUSHERCONTACT: ANTHONYPHONE: 7144967229FAX: 3103249983EMAIL:[email protected]––––––––––––––––––––––––––––––––SKYTRAK 10042 TELEHANDLER | SKY-TRAK 10042, OROPS, 2500 HRS ORLESS, GOOD TIRES, GOOD PAINT.CONTACT: TOM THORNTONPHONE: 817-282-7900EMAIL: [email protected]––––––––––––––––––––––––––––––––FRONT LOADER | CAT 432 D OR E JD310 JCB 3X OR 4X 2007 2008. NO MORETHAN 2000 HOURS.EMAIL: [email protected]––––––––––––––––––––––––––––––––KUBOTA B4672A | KUBOTA HOEATTACHMENT AND SUBFRAMECONTACT: JEFF FOLKEMAIL: [email protected] ––––––––––––––––––––––––––––––––GP WHEEL LOADER BUCKET | GENER-AL PURPOSE BUCKET 1.6 FOR A 1985KOBELCO LK 300 ACONTACT: DALE CHAPMANPHONE: 252-438-5144FAX: 252-438-2350EMAIL:[email protected]––––––––––––––––––––––––––––––––CASE LOADER BACKHOES | CASE 580K SK L SL M SM SCONTACT: FRANK (TRICO EQUIPMENT)PHONE: 800-TRICO-50FAX: 732-780-3618EMAIL:[email protected]––––––––––––––––––––––––––––––––ZF TRANSIT MIXER GEAR BOXES | IWANT LARGE QUANTITY OF :USED ZFTRANSPORT MIXER DRIVE P & PKSERIES. ALSO LARGE QUANTITY OF :USED SUNDSTRAND HYDRAULIC PUMP& MOTORCONTACT: M.ASKARIPHONE: 819-246-9577FAX: 819-205-0972EMAIL:[email protected]––––––––––––––––––––––––––––––––ALL NEW LATE MODEL CAT, KOMATSU,DEERE, OTHER | WE ARE LOOKING TOBUY CONTRACTOR OWNED NEWERLATE MODEL CONSTRUCTION EQUIP-MENT AT FAIR PRICE. NOBROKERS/DEALERS.CONTACT: JOEPHONE: 570-250-5559EMAIL: [email protected]––––––––––––––––––––––––––––––––TRUCK MIXER & FORKLIFT | I AMLOOKING FOR (2) 2005 OSHKOSH TRIFRONT DISCHARGE MIXER, OR INTER-NATIONAL, "IM OPEN FOR OPTIONS"

ALSO LOOKING FOR (2) FORKLIFT, 200TO 2003 DIESEL POWER, THREE STAGEMAST 6 TO 7 TON CAPACITY, WHOLE-SALE PRICES ONLY! THANK YOU!CONTACT: WILLIAM A. FREITESPHONE: 813-294-2222FAX: 352-610-9849EMAIL:[email protected]––––––––––––––––––––––––––––––––1989 TO 1996 420 JOHN DEERE FRONTMOUNT ENGINE RIDING LAWN MOWERCONTACT: SPENCER THOMASPHONE: 804 514 7568EMAIL:[email protected]––––––––––––––––––––––––––––––––TRACKED SCREENING PLANT INSOUTHWESTCONTACT: JACK DYKSTRAPHONE: 602 390 4846FAX: 602 269 5863EMAIL:[email protected]––––––––––––––––––––––––––––––––A WINCH TO FIT A DRESSTA DOZER TD15 H SERIAL #-32584CONTACT: EDWARD BECKERPHONE: 870-421-8301EMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU MOBILE CRUSHERMODEL:BR300JG AND BR350JGKOMATSU OFF-ROAD DUMP TRUCKHD325-5 AND HD465-5CONTACT: K.NAKAPHONE: 06-6754-4570FAX: 06-6972-7515EMAIL: [email protected]––––––––––––––––––––––––––––––––CATERPILLAR 12H | WE AREINSTALLING A MID-MOUNT SCARIFIERON A CAT 12H GRADER AND ARE INNEED OF 1)8W-0684 BRACKET ASSEM-BLY AND 1)8W-0681 PLATE.CONTACT: WENDELL CAINPHONE: 770-381-8984FAX: 770-381-6977EMAIL:[email protected]––––––––––––––––––––––––––––––––ZF GEAR BOXES (MIXER DRIVE) | WEWANT TO BUY: CONCRETE READY MIXZF DRUM DRIVE GOOD USED OR CORE CONTACT: M.ASKARIPHONE: 819-246-9577FAX: 819-2050972EMAIL:[email protected]––––––––––––––––––––––––––––––––WANTED CAT LOADERS!! | NEED THEFOLLOWING CAT LOADERS: 9 3 6 (84 -92) 9 3 8 G (AROUND YEAR 05) 9 5 0B/C/E/F-II (78 UP) 9 5 0 G/H (’05 – ’09,FULL STEERING ONLY) 9 6 6 C/D/E/F (78UP) 9 6 6 H (’09 – ’11, FULL STEERINGONLY, HOURS AROUND 8000 OR LESS,ORIGINAL PAINT) 9 8 0 C/F (87 UP)CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:[email protected] ––––––––––––––––––––––––––––––––FRACK TANKS | NEED 6 TANKSCONTACT: JOHN EDDLEMANFAX: 870-762-0073EMAIL:[email protected]––––––––––––––––––––––––––––––––

Attention Contractors!Post Your Wanted To Buy Listings FREE!

Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website

for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings.


Grand Openings Feature Ribbon-Cutting, Food, Prizes

A ribbon cutting ceremony was also held at the all new FABCO Rents – The Cat Rental Storelocation, which specializes in daily, weekly and monthly rentals of Caterpillar machines, worktools, generators and aerial equipment.

John Honer (C) talks with Kent Oren (L) and Jim Gibbons, bothof FABCO, at the company’s new full-service facility.

John Erjavec (C), FABCO, shows the shop area toJim (L) and John Kotek, Black Hills Angus Farms.

Andre Lorenzen (second from L), Miron Construction project man-ager, discusses the new facility with representatives from FABCOincluding Tom Svetnicka (L), marketing manager, Bob Bruce, west-ern district product support manager, and Jere Fabick (R), presi-dent and chief executive officer.

Mike Kendhammer, Universal Oil& Machine, checks out the tracksof this Cat 277C compact trackloader.

Adam Patrow (L), FABCO, shows theTrimble GPS system to Dave Dresel, DreselConstruction.

Taking a look at the Cat12M grader on display isShannon O’Rourke ofMathy Construction Co.

(L-R): Pat and Myron Dearth of Dearth Farms with Terry Stampfl,FABCO, in front of the Cat CT660L truck.

FABCO from page 48



21ST ANNUAL FALL AUCTION

DSA Auction Complex6531 S. St. Rd. 13

PENDLETON (INDIANAPOLIS) INDIANA(1 Mile North of I-69 @ Exit 214)

Selling Equipment For: Complete Engineering Solutions, Inc., Featherston Farms, Omni Source, RPM Machinery, MaCallister Machinery along with other Local & Regional Contractors, Banks, Lending Institutions and Rental Companies

FRIDAY, SEPTEMBER 20, 2013 • 8:00 A.M.

Sale Site Phone: 765-778-9277 - Ask For Mark or Chris

Terms: Complete Payment on Sale Day – Payment May Be Made By Cash or Check.

*ALL CHECKS MUST HAVE CURRENT BANK LETTER GUARANTEEING FUNDS*

BUYERS PREMIUM: 2% on each item $2501 & Greater 10% on each item $2500 & Less

Auctioneers: Nic Smock - Lic. #AU10500037

DON SMOCK AUCTION CO., INC.

6531 S. State Road 13Pendleton, IN 46064

[email protected]

EXCAVATORS: ‘95 Liebherr LitronicA932 Solid Tire Material Handler, ‘02 Cat325CL, ‘99 322BL, 315BL, ‘06 Deere35D Mini, ‘06 Yanmar V1027-3 Mini, ‘03Bobcat 325 Mini, IHI 40 Mini w/ BlownEngine, 28" Hydraulic Plate Tamper, HYDRAULIC TRUCK CRANE: GroveTH800 Truck Crane, S/N 20471, Cummins Diesel up and down, 9K Miles,Crane 6K Hrs, Nelson Boom Dolly, c/w Every Accessory known to man,CRAWLER TRACTORS: ‘01 Cat D6M LGP, ’04 & ‘05 Cat D5G LGP, (2) D4H XL,(2) D3C XL, ‘86 Case 850D, CRAWLER LOADERS: ‘98 Cat 939C, Case 1150B& 850C, Dresser 175C, LOADER BACKHOES: ‘08 Case 580 SM Series III, ‘03Case 590 SM, 580K, 580C, ‘05 Deere 310G, 310SG, ‘04 JCB 217 ‘95 JCB 214SSeries II, Cat 416C, ‘98 Deere 710D, Ford 555B & 5500, Hyd. Post Hole Diggerc/w 3 Augers, Hughes Hyd. Breaker, Vermeer T44 Tree Spade, To Fit NewHolland or Deere, SKID LOADERS: (2) ‘12 Case TV380 Track, 984 & 951 Hrs,C/H/A, ‘08 Deere CT322 Track, ‘04 Cat 277B Track & ’04 257B Track, ‘06 Cat268B, ‘12 New Holland L218, ‘06 Bobcat T190 Track, ‘07 S300, ‘05 S220,S130, ‘03 Bobcat MT50 Walk, ‘00 Deere 240, Toro TX420 Dingo, (40) NewAttachments, Bobcat Hammer, RUBBER TIRED LOADERS: ‘11 Case 621E,1,398 Hrs, C/H/A, Pre-Tier 4, (2) Case 621D, W26B, ‘08 Deere 544J, ‘98Komatsu WA 380-3, Samsung SL180-2, GRADER & SCRAPER: Deere 770AGrader, Deere 762B Scraper, COMPACTION & ASPHALT EQUIPMENT: Blaw-Knox PF-180, Mauldin 1500, ‘08 Dynapac CA134D Smooth Drum w/ 934 Hrs,‘98 Ingersoll-Rand DD110 Double Smooth Drum, SWEEPER & TRENCHER:‘06 Rosco RB-48 Broom, Ditch Witch R40 Trencher, TRACTORS: A/C 7020AG, Case 2670 & 2470 AG Tractor, MF 230 Utility Tractor, (2) Sweepers,Landpride Finish Mower, Grader Box, Landpride Roto-Tiller, Bush Hog Aerator,Agro-Chem Sprayer, Taylor-Way 8 Foot, 10’ Blade, Landpride Soil Pulverizer,FORKLIFTS: ‘02 Sky Trak 10054 Telescopic, Lull 644 Telescopic, ‘92 Case584E, IR RT706E, ‘95 Mastercraft MC645-FW5, Hyster 5K#, AERIAL LIFTS:Simon 41/24 Knuckle Boom Lift, ‘99 JLG 450AJ Boomlift, TRUCK TRACTORS:All Tandems, ‘06 Freightliner CL12064ST Day Cab Columbia Truck, Cat C13Diesel, ‘05 Int. 9900ix Truck, Cummins ISX Diesel, Eagle Package, ‘05 Sterling9513 Truck, ‘81 Peterbilt 362 Classic II Truck, 435 HP Detroit, 187K Miles,

DUMP TRUCKS: ’98 & ‘99 Volvo Tri Axle Dump, ‘98 Ford Louisville Tri AxleDump, ‘97 Int. 2674 Tri Axle Dump, ’91 & ‘94 Mack RB690S Tri Axle Dump,‘88 GMC Tandem Axle Dump, ‘92 Volvo White WG42T Single Axle Dump,Cummins, ‘91 Ford F450 Contractors Dump, ‘82 Ford F800 Single Axle Dump,SPECIALITY TRUCKS: ‘98 Kenworth Tandem Axle Flatbed Truck, Cummins,‘03 Int. 4300 Master Craft MTD Backhoe Truck, DT466 Diesel, AllisonAutomatic, 106K Miles, ‘94 Freightliner Flatbed Roll Off Truck w/ Hyd. Stinger,Cummins, ‘90 Int. 4900 Service Truck, Diesel, Compressor, Tanks/Reels, ’96& ’97 Ford F450 Service Trucks, Diesel, Automatic, Auto Crane, ‘77 GMC C600Cab & Chassis, ONE TON TRUCKS & DOWN: ‘06 Ford F250HD Pickup, ‘99Chev 3500 Utility, ‘98 Dodge Ram Quad Cab 1500 Pickup, LOWBOY &GOOSENECK TRAILERS: ‘88 Talbert T3D 50 Ton Lowboy, Shuster 7 TonGooseneck, TAG TRAILERS: (2) Unused ‘13 Kaufman 10 Ton & 10,000# Tag,(2) ‘05 Haulmark Enclosed Trailers, International 20' Bed, 6" Dovetail Tag, ‘07Thule Cargo Hauler, Butler 10 ton Tag, Tandem Axle 5 Ton Tag, Jobsite 36"Office Trailer, Fuel 1000 Gallon Tank Trailer, TOYS: ‘85 Chev. Corvette Car, ‘03Mitsubishi Montero Sport SUV, Cub Cadet LT1042 Riding Mower, Bar Stool GoCart, ‘07 Club Car Electric Golf Cart, Several Still in the Box Antique Const.Equip. Toys, VARIOUS: Basler KR7FF 580KW Generator c/w V-16 DetroitDiesel, Detroit 471 Diesel Engine, Cat 6 Cylinder Diesel Engine, Flight Chain fora Deere 762 Scraper, Hyd. Auger Power Head, 12" Auger Bit, 5 Forks fromForklifts, Air-Flo 24D Salt Spreader, MISCELLANEOUS: Table Saw, 8 HP Tech2" Trash Pump, Kitchen Cabinets, Oak Overlay Finish, Top Location Mount,Stop Light, 2 Wheel Dolly, 30" x 72" Wood Work Bench, Wheel Horse 5HPVacuum, 2 Rolls of Fence, Honda 2" Gas Power Trash Pump With QuickAttachment, Commercial 19 Slot Vending Machine, Heavy Lifting Chain, HeavyLifting Chain for a Spreader, Alliance ND Tires With Rims, 18.4-26, Fits Roller,8 Low Pros, 295/75R 225 Tires, 500 Gallon Clean Oil Tank with Air Pump Usedin a Shop, Miller BIG 40 Welder, Bucket, Takes 3 Inch Pin, Plus much more

Can’t Make it to the Auction?BID LIVE ONLINE!

Register for this auction on proxibid.com

Robert G. Frey, AuctioneerArchbold, Ohio 43502

419-445-3739 • www.freyandsons.com

Absolute Auction

Equipment: '07 Cat 980H RTL, SN: JMS02072, Command Steer, GP Bkt, 9600hrs.; '96 Cat 980G RTL, SN: 2KR0877, Command steer, GP Bkt, 22000 hrs.; '96Cat 375 Excavator, SN: 1JM241, 54" bucket, 20185 hrs.; '98 Komatsu D65PX-12Dozer, SN: 62089, ROPS, St/Tilt, 5455 hrs.; Cat 416B 4x4 TLB, SN:8ZK8787,EROPS, Ext. Hoe.Aggregate: '05 Fintec 542 Portable Crawler Screen Plant, Diesel, 5x12 3 Deck,5924 hrs.; Hewitt Robins 1536-4230 Twin Apache Jaw / Roll Portable Crusher,Electric, New Jaw dies.; '99 Greystone 8x28 AggSpec II Sand Classifier.; CedarRapids 5x16 3-Deck Dry & 4x12 3-Deck Wash Screens; (2) Greystone 36x28Single Sand Screws; Lg. Eagle Twin Log WasherConveyors: Superior 36"x80' Radial Stacker; '93 DRM 36"x60' Stacker w/ Scale;(3) 36"x60' Stackers; Finlay M100 30"X80' Stacker w/ Cummins; Balint 24"x60'& Greystone 24"x50' Radial Stackers. Pioneer 30"x50' & Greystone 24"x80'Fixed; Finlay 50' Fixed; (2) Feeder / Conveyors; Misc. Components & Parts.Trucks: (2) 2000 Kenworth T800 19' Alum. Quad Dump Trucks, Cat C15-475,RTO-16908LL & (2) '00 Benson 6 axle Alum. Pup Dump Trailers. '98 GMC3500HD Service Truck; '87 GMC Fuel & Ford L9000 Water Trucks; 40'Container; Gates & Weatherhead Hyd. Hose Machines; Misc. Shop Tools &Equipment.Other Equip: 2010 Fairbanks 70' 200000# Truck Scale; Cat D343 285kw & 3406 SR4 210kw Gen Sets; Generac 100kwGen Set; Cummins 250kw (Bad Gen); Cat D343 Engine; IR Light Plant & More.

Thurs. September 26, 2013 - 9:30amLocation: 200 E. Sutton Rd, Metamora, MI (East of Flint)Note: Forrest Aggregate is closing operations at its Sutton Rd. Pit and selling the equipment at absolute auction.

See photos and details at freyauctions.com Online bidding available.Terms: 1% buyer premium on items over $2500, on 10% items $2500 and less. Pay in full sale day by cash or guaranteed funds. All items sold as-is, where-is.

Efficiency Production’s MikeWest Assists in Installationously as the trench or pit is excavated by slid-ing the panels into integrated rails on theposts — an outside slotted rail first, then anopen-face rail on the inside — then pushingthe panels and posts incrementally down tograde as the pit is dug; a process commonlyreferred to as a “dig and push” system.“We’ve always said that in theory,

ClearSpan can have unlimited size, and thisexcavation proves that a 50 foot wide pit isnot just theory,” said Efficiency ProductionVice President of Engineering, Mike West.“Other manufacturer’s clear span configura-tions need to be installed with cumbersomecross-members. Only Efficiency’sClearSpan system is never encumbered bycross-members at any time,” West added.In addition to Mitchell, Efficiency

Production sent senior Slide Rail InstallerTim Hurst to assist with the installation.About the Efficiency team, Manusos ProjectSuperintendent Kevin Aronson said “Theywere not afraid to get dirty, not afraid to geton the ugly side of stuff,” he said. “Theywere very helpful, especially in the initialstages training my guys,” Aronson contin-

ued. “[The Efficiency] guys busted theirasses, and trust me I would not hesitate to letthem know if I was displeased,” he added.Manusos installed the entire system with a

Komatsu PC 400 and PC 490 excavators,plus support equipment. All told, the lift sta-tion was entirely installed in a couple ofweeks between June and July, 2013.Incorporated in 1992, Manusos General

Contracting Inc. is a Certified Women’sBusiness Enterprise General Contractor.Manusos also has effectively provided workon individual contracts for concrete, trusses,general trades, etc. They employ union-skilled carpenters and cement masons.With offices in Chicago, Ill.; Houston,

Texas; and Orlando, Tampa, Miami andJacksonville, Fla.; Efficiency Shoring &Supply is an official Efficiency ProductionInc. factory-direct sales and rentals compa-ny.For more information, call 800/220-8707

or visit www.efficiencyshoring.com.(This story also can be found on



MANUSOS from page 36


California Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change. Copyright © 1999-2013 IronPlanet, Inc. All Rights Reserved. IronPlanet®, IronClad Assurance® and Auctions you can trust® are registered service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.

PREVIOUS AUCTION RESULTS:

ONLINE EXCLUSIVE | WWW.IRONPLANET.COM

NO SHIPPING | SELL RIGHT FROM YOUR YARD

PREVIOUS A

TS:UCTION RESULPREVIOUS A

T 7 2005 CA AT 725 ArSold for $56,000

kucrted Dump TticulaT 725 ArSold for $56,000

T RM-350B Soi 2001 CA AT RM-350B Soil StabilizSold for $72,000

laimerecer/RT RM-350B Soil StabilizSold for $72,000

Haz

emag APPH1620Q Impact CrHazSold for $34,000

usheremag APPH1620Q Impact Cr

T CAAT 140H Motor GraderSold for $84,000

T 140H Motor GraderSold for $84,000

y Doubtoribraator2004 Sakai SW850 VSold for $28,000

um Compactorle Dry DoubSold for $28,000

hunderT

bird 516S3 Screen Plant w/ Impact CrhunderSold for $61,000

usherbird 516S3 Screen Plant w/ Impact Cr

ilaC

wasaki 90ZV Wa2003 KSold for $62,000

. P58795207d #nonamon Coitcua Ainrof p y B

l Loaderheewasaki 90ZV WSold for $62,000

t tcebut snemiu. Eetao dt tsiranimiler. P y l q p j

T 613C 2004 CA AT 613C WSold for $42,000

alPnor3 I102-999t © 1hiro. Cenaho ct t g py g

agonter WaT 613C WSold for $42,000

Euc

tenalPnor. Idevreses Rthil Rl. Acntena ®, , I g

oad End Dump Tlid R35 O�-REucSold for $30,500

kucr mp T r


ALEX LYON & SON AUCTIONEERSwww.lyonauction.com315-633-2944

• Bangor, MESun.,�September�15,�2013For:�Light�Construction�&�SupportEquipment

• Boston, MASat.,�September�21,�2013For:�Complete�Liquidation,Construction�Equipment,�TruckTractors�&�Trailers

• Dallas (Fort Worth), TXTues.,�September�24,�2013For:�Major�Acquisition�&�RentalReturn�Auction

• Parkersburg, WVThurs.,�September�26,�2013For:�Late�Model�ConstructionEquipment

• San Bernardino, CASeptember�27-28,�2013For:�Cat,�Komatsu,�John�DeereEarthmoving�Equipment

• Pittsburgh, PASat.,�September�28,�2013For:�Construction,�SupportEquipment�&�Scrap�HandlingEquipment

• Portland, ORFri.,�October�4,�2013For:�Late�Model�ConstructionRental�Fleet�Equipment

• Atlantic City, NJSat.,�October�5,�2013For:�Low�Hours�Compact�RentalFleet�Equipment

• Milwaukee, WIFri.,�October�11,�2013For:�Complete�Liquidation�ofConstruction�Equipment

• Racine, WISat.,�October�12,�2013For:�Construction�Rentals,Attachments,�Support�and�more

• Albany (Troy), NYSun.,�October�13,�2013For:�20+�Acres,�Nice�Home,Shop�&�Barn,�Outstanding�View!

• Philadelphia, MSWed.,�October�16,�2013For:�Major�Job�Completion

• Midland (Odessa), TXThurs.,�October�17,�2013For:�Rental�Returns�ofConstruction,�SupportEquipment,�Aerial�Lifts�and�more

• Houston, TXFri.,�October�18,�2013For:�Large�Job�Completion�ofLate�Model�Equipment

• Las Vegas, NVSat.,�October�19,�2013For:�Late�Model�Rental�FleetEquipment,�Booms,�Scissors,Telescopic�&�Warehouse�Forklifts

• Lima, PeruSat.,�October�26,�2013For:�Late�Model�EarthmovingConstruction�Equipment,�Support&�Attachments.

• Buffalo, NYFri.,�November�1,�2013For:�Late�Model�Construction�&Boring�Equipment,�Trucks�&Trailers

• Franklin, NHSat.,�November�2,�2013For:�Complete�Liquidation�ofConstruction�&�RiggingEquipment

• Delaware, NJSat.,�November�9,�2013For:�Very�Large�ContractCompletion�Auction

• Canastota (Syracuse), NYSat.,�November�16,�2013For:�Rental�Returns�of�LateModel�Construction�Equipment

RITCHIE BROS. AUCTIONEERSwww.rbauction.com402-421-2631

• Geelong, AUSSeptember�17,�2013

• Toronto, CANSeptember�17,�2013

• Phoenix, AZSeptember�18,�2013

• Brisbane, AUSSeptember�18,�2013

• St Louis, MOSeptember�19,�2013

• Oakville, CANSeptember�19,�2013

• Ocana/Moncofa, ESPSeptember�19-20,�2013

• Reno, NVSeptember�20,�2013

• Atlanta, GASeptember�20,�2013

• Truro, CANSeptember�20,�2013

• Rapides-Des-Joachims, CANSeptember�23,�2013

• Albuquerque, NMSeptember�24,�2013

• Nashville, TNSeptember�24,�2013

• Fort Worth, TXSeptember�25-26,�2013

• Montreal, CANSeptember�25-26,�2013

• Tampere, FINSeptember�25,�2013

• Moerdijk, NLDSeptember�26,�2013

• Swan River, CANSeptember�26,�2013

• Tipton, CASeptember�26,�2013

• Minneapolis, MNSeptember�27,�2013

• Wasilla, AKSeptember�28,�2013

• Raleigh Durham, NCSeptember�30,�2013

• Kansas City, MOOctober�1,�2013

• Chicago, ILOctober�3,�2013

• Towanda, PAOctober�4,�2013

• Manchester, NHOctober�11,�2013

• Cincinnati, OHOctober�15,�2013

• Lexington, KYOctober�17,�2013

• Hammond, LAOctober�17,�2013

• Shreveport (Sibley), LAOctober�24,�2013

• Williston, NDNovember�7,�2013

BAR NONE AUCTIONwww.barnoneauction.com866-372-1700

• San Bernardino, CASeptember�27-28,�2013For:�Heavy�Equipment�&Commercial�Trucks

CAT AUCTION SERVICESwww.catauctions.com866-750-9432

• Albuquerque, NMSeptember�19-20,�2013For:�Unreserved�Public�Auction,Complete�Dispersal�A.S.�HornerInc

• Detroit, MIThurs.,�October�3,�2013For:�Complete�Dispersal�ofRockwood�Quarry

• Houston, TXThurs.,�October�17,�2013For:�Construction�Equipment

• Denver, COThurs.,�October�24,�2013For:�Construction�Equipment

• Las Vegas, NVFri.,�November�8,�2013For:�Construction�Equipment

COMMONWEALTH OF PAAUCTIONSwww.auctionsbygov.com

• Mill Hall, PATues.,�October�8,�2013For:�Fall�Heavy�Equipment

DEANCO AUCTIONSwww.deancoauction.com601-656-9768

• Philadelphia, MSSeptember�18-19,�2013For:�Construction�Equipment

• Philadelphia, MSNovember�20-21,�2013For:�Construction�Equipment

DEL PETERSON & ASSOCIATESwww.delpeterson.com 800-492-9090

• ONLINE ONLYTues.,�September�24,�2013For:�Construction�Equipment

DON SMOCK AUCTION CO., INC.www.dsaauctions.com765-778-9277

• Pendleton, INFri.,�September�20,�2013For:�Construction�Equipment

• Pendleton, INFri.,�December�13,�2013For:�Construction�Equipment

FREY & SONS, INC.www.freyandsons.com 419-455-3739

• Metamora (Flint/Lapeer), MI

Thurs.,�September�26,�2013For:�Equipment�from�ForrestAggregate

HESS AUCTIONEERSwww.hessauctioneers.net 866-511-2493

• Marietta, PAFri.,�September�20,�2013For:�Truck,�Trailer�&�Equipment�

HUNYADY AUCTION COMPANYwww.hunyady.com 800-233-6898

• New Orleans, LASealed�Bid�–�Deadline:Wed.,�September�18,�2013For:�Pedestal�Mount�StevedoringCrane�Barges

• Binghamton, NYThurs.,�October�10,�2013For:�Complete�Liquidation�BenDaniels�Construction�Equipment

• Hewitt, NJWed.,�October�16,�2013For:�Complete�Liquidation�H&GContractors,�Inc.

IRAY AUCTIONSwww.iraymn.com 320-968-7230

• Foley, MNFriday,�December�6,�2013For:�Construction�Equipment

IRON PLANET AUCTIONSwww.ironplanet.com 888-433-5426ONLINE AUCTIONSGo to www.ironplanet.com to viewthe complete auction schedules,inspection reports and to place yourbid!

• ONLINE ONLYWed.,�September�18,�2013For:�One-Owner�EquipmentRealignment�

• ONLINE ONLYSeptember�25�&�26,�2013For:�Quarry,�Aggregate�&�PavingAuction�

J.M. WOOD AUCTION COMPANYwww.jmwood.com 800-447-7085

• Montgomery, ALFri.,�October�25,�2013For:�State�of�Alabama�Dept.�ofTransportation

• Montgomery, ALDecember�4-5,�2013For:�Construction�Equipment,Trucks�&�Forestry�Equipment

JOSEPH FINN CO. AUCTIONEERS & APPRAISERSwww.josephfinn.com 617-964-1886

• Westwood, MA

Tues.,�September�17,�2013For:�Concrete�Sawing�Company,Inc.

MARTIN & MARTIN AUCTIONEERS, INC.www.mmaauction.com

800-763-2728

• Charlotte, NCTues.,�September�17,�2013For:�Construction�Equipment,Trucks,�Trailers�&�Related�Items

• Pelzer, SCWed.,�September�25,�2013For:�Public�Fall�Equipment�&Truck�Auction

NITKE AUCTIONSwww.nitkeauctions.com

715-693-4447

• Wausau, WIOctober�25-26,�2013For:��Heavy�Construction,�Truck&�Trailer�Auctions�

PETROWSKY AUCTIONEERS INC.www.petrowskyauctioneers.com

860-642-4200

• North Franklin, CTSeptember�27-28,�2013For:�Major�Public�EquipmentAuction

• Columbus, OHThurs.,�Oct�10,�2013For:�Public�Equipment�Auction

• Carroll (Columbus Area), OHThurs.,�Oct�17,�2013For:�Major�Public�EquipmentAuction

• Ponce, Puerto RicoThurs.,�November�14,�2013For:�Major�Job�CompletionEquipment

PURPLE WAVE AUCTIONwww.purplewave.com

866-608-9283

• ONLINE ONLYTues.,�September�17,�2013For:�Trucks�and�Trailers

• ONLINE ONLYThurs.,�September�19,�2013For:�Construction�Equipment

• ONLINE ONLYTues.,�September�24,�2013For:�Construction�Equipment

• ONLINE ONLYThurs.,�September�26,�2013For:�Construction�Equipment

RITCHASON AUCTIONEERSINC.www.ritchason.com

800-806-3395

• Lebanon, TNSat.,�September�21,�2013For:�Heavy�Equipment�&Commercial�Vehicles

ROGERS REALTY & AUCTION COMPANYwww.rogersauctiongroup.com

800-442-7906

• Charlotte, NCSat.,�September�21,�2013For:�Construction�Equipment

ROLLER AUCTIONEERSwww.rollerauction.com

866-515-1668

• Henderson, CO

Wed.,�September�18,�2013

For:�Construction�&�Contracting

Equipment

ROY TIETSWORTH AUCTIONEERSwww.tietsworth.com

585-243-1563

• ONLINE ONLY

September�10-17,�2013

For:�Construction�Equipment

• Seneca Falls, NY

Sat.,�September�21,�2013


SALES AUCTION COMPANY, LLCwww.salesauctioncompany.com

860-627-7506

• Windsor Locks, CT

Sat.,�October�5,�2013

For:�Construction Equipment

THE AUCTIONEERS GROUPwww.theauctioneersgroup.com

732-776-7222

• Wall, NJ

Sat.,�October�12,�2013


UTILITY AUCTIONSwww.utilityauctions.net

302-530-9103

• Wilmington, DE

Fri.,�October�25,�2013

For:�Construction, Utility &Forestry Equipment

WAYNE PIKE AUCTION COMPANYwww.waynepikeauction.com

763-389-2700

• Princeton, MN



• Princeton, MN

Sat.,�December�7,�2013


WILSON’S AUCTION SALESwww.wilsonsauction.com

302-422-3454

• Harrington, DE


For:�Mid-Atlantic�Fall�Equipment

Auction

YODER & FREY AUCTIONEERS, INC.www.yoderandfrey.com

419-865-3990

• Taylor, MI

Fri.,�September�20,�2013

For:�Special Truck Tractors, RoadTractors & Trailers

AuctionsComingTo view information on upcoming auctions visit our

Auction Calendar at www.constructionequipmentguide.com


rbauctionfinance.com | 1.855.331.7237

Get your gear, keep your cash to run your business.Buying equipment and trucks at Ritchie Bros. unreserved auctions has always been fair and easy. And now it’s even easier. Until December 31, 2013, you can finance your purchases at any Ritchie Bros. auction in the USA and Canada and enjoy:

▸ 90 days with no payments*▸ Up to 100% financing with $0 down

Thousands of equipment items and trucks. Hundreds of auctions. No minimum bids. Don’t miss out – apply online or call toll free today.

* No payments for 90 days is a limited time off er from Ritchie Bros. Financial Services. Financing is subject to credit approval and qualifi ed equipment or assets. Minimum contract term of 24 months and qualifying assets valued at $10,000 or higher. Off er is available for deals booked and funded by December 31, 2013, and for items purchased by US or Canadian businesses or sole proprietors at Ritchie Bros. auctions occurring from September 1, 2013 to December 31, 2013 only. First payment will be refl ective of date of invoice and at the sole discretion of Ritchie Bros. Financial Services. Additional terms and conditions apply. Contact Ritchie Bros. Financial Services for more information.

▸ Fast pre-approvals, good for up to 90 days▸ Easy, convenient cross-border financing

Get your gear, keep your cash to run your business.Buying equipment and trucks at Ritchie Bros. unreserved auctions has always been fair and easy. And now it’s even easier. Buying equipment and trucks at Ritchie Bros. unreserved auctions has always been fair and easy. And now it’s even easier. Until December 31, 2013, you can finance your purchases at any Ritchie Bros. auction in the USA and Canada and enjoy:

Get your gear, keep your cash to run your business.Get your gear, keep your cash to run your business.Get your gear, keep your cash to run your business.Buying equipment and trucks at Ritchie Bros. unreserved auctions has always been fair and easy. And now it’s even easier. Buying equipment and trucks at Ritchie Bros. unreserved auctions has always been fair and easy. And now it’s even easier. Buying equipment and trucks at Ritchie Bros. unreserved auctions has always been fair and easy. And now it’s even easier.


Frey & Sons Holds Absolute, Unreserved Auction in Lodi

(L-R): Thom Baker, John Baker and Ross Beachy of Baker Sands,were pleased with the bidding.

Ken Bartlett (L) and Chris Clark ofClark Enterprises, came in fromGroveport, Pa., in hopes of takinghome some machines.

(L-R): George and Bill Small,along with Terry Stewart ofAcme Machinery, join Mike Smallof Small Sand & Gravel to find aspot out of the rain while keep-ing up with the auction.

The auction drew a strongcrowd of onsite bidders

despite a rainstorm.

(L-R): Ohio CAT’s Skip Steward talks with Ben Klotzsche of Friendsville Sand, along with Nickand Nick Kostecki Jr. of Kostecki Excavating and Ohio CAT’s Matt Mahnen.

Robert Frey, president andlead auctioneer of Frey & Sons,calls out another winning bid.

Kathy Evans and Dean McIlvaineof TwinParks Organic Farm,found this Case 590SL a goodplace to avoid the rain.

Frey & Sons Auctioneers held anabsolute, unreserved auction in Lodi,Ohio, on Aug. 22. The auction was

conducted to sell off the equipment assets ofBaker Sand Inc., due to the closure of its pit.

Rain did little to dampen the spirits ofauction attendees on hand to look for bar-gains. Highlights of the auction included aManitowoc 4600 clam/ dragline crane, Catwheel loaders, excavators and dozers, alongwith additional aggregate equipment andtransportation vehicles. The auction drewbidders from Ohio and surrounding states aswell as enthusiastic online bidding.





CAT AUCTION SERVICES860 Blue Gentian Road, Suite 100 Eagan, MN 55121

866.984.8782 [email protected]

Follow the new leader.®

www.catauctions.com

UPCOMING AUCTIONS

Equipment subject to change. View updated equipment lists at www.catauctions.com

CAT 773E (3 DETROIT, MI)

CAT 773D (3 DETROIT, MI)

CAT 988F (3 OF 5 DETROIT, MI)

SYMONS CONE CRUSHER (DETROIT, MI)

Online Bidding Available!Can’t join us onsite? Visit www.catauctions.com to learn more and register to bid online.

©2013 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, their respective logos and “Caterpillar Yellow,” as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

UNRESERVED PUBLIC AUCTIONS

www.catauctions.com

Our auctions offer a wide variety of equipment makes and models, as well as premium services from the Cat name you already know and trust. Search the full equipment listing and register to bid online at:

DETROIT, MI OCTOBER 3 {COMPLETE DISPERSAL OF ROCKWOOD QUARRY}

HOUSTON, TX OCTOBER 17DENVER, CO OCTOBER 24LAS VEGAS, NV NOVEMBER 8

VRESERNU

ICBLU PEDV

SIONTCU AIC

VRESERNU

ICBLU PEDV

SIONTCU AIC

ORTED

OI MT,I

BEROTCO

3

EVENDTSUHOTE DELPMOC{ORTED

OO C,RE

X T,ONTL OASREPSITE DOI MT,I

BEROTCO

BEROTCOD QOOWKCOF RL O

BEROTCO

4 2

7 1BER}YRRAUD Q

3

full equipment listing and register to bid online at:

Our auctions offer a wide variety of equipment makes and models, as well as

E VASLEVEND



.catauctions.com

V N,ASGEOO C,RE



MEVNOVBEROTCO

Search the


8BERM4 2

.catauctions.com

to learn more and register to bid online.Can’t join us onsite? Visit

Online Bidding A

www

.catauctions.com

to learn more and register to bid online.Can’t join us onsite? Visit

Online Bidding A

.catauctions.com

to learn more and register to bid online..catauctions.comwww

vailable!Online Bidding A

.catauctions.com

.catauctions.com

.catauctions.comwwwFollow the new leader

are trademarks of Caterpillar and may not be used without permission., CTT, CA. All Rights Reserved. CA T©2013 Caterpillar

.catauctions.com

®.Follow the new leader

are trademarks of Caterpillar and may not be used without permission.ellowTERPILLAR, their respective logos and “Caterpillar Y CA T

860 Blue Gentian Road, Suite 100 866.984.8782

®

,” as well as corporate and product identity used herein, ellow

860 Blue Gentian Road, Suite 100 T AUCTION SERVICESCAAT AUCTION SERVICES

866.984.8782

Eagan, MN [email protected]

T AUCTION SERVICES Eagan, MN 55121

[email protected]

wwwequipment lists atEquipment subject to change. View updated

.catauctions.comwwwEquipment subject to change. View updated


You Need to Know the Real Value of Your Equipment!

Do you have adequate insurance?Do you need to re�nance?

Is each piece worth your investment?Which pieces should be replaced?

Contact I.R.A.Y.’s GPPA Certi�ed Appraisal TeamGet answers to your questions

Call: (877) or (320) 968-7230Email: [email protected]

www.iraymn.com

From the Company You Already Trust with Your Equipment

Associated General ContractorsClaim Rules Lack Justification because these rules will force federal con-tractors to spend an estimated $6 billion ayear to produce reams of new paperworkproving they are doing what the federal gov-ernment already knows they are doing.“Administration officials claim these rules

are necessary to address higher rates ofunemployment among veterans and the dis-abled. Yet federal employment data showsthat the annual average unemployment ratewas lower for every category of veteran cov-ered by this rule than compared to the non-veteran unemployment rate. The only excep-tion was that the unemployment rate for‘Gulf War era II’ veterans was slightly high-er than for nonveterans (9.9 percent vs. 9.0percent), likely because they returned to thework force during a protracted economicdownturn. Federal data also shows that vet-erans of all ages are already more likely to beemployed by construction firms than arenon-veterans. Federal data also indicates thatpeople with disabilities are as likely to be

employed in construction as people withoutdisabilities.“In their effort to counter non-existent

employment challenges, the administrationhas developed two rules that require federalcontractors to take extensive measures tocombat discriminatory practices the federalgovernment already knows barely exist. A2012 analysis of eight years of the mostrecent federal enforcement data found thatonly 0.02 percent of all federal contractorscould be seriously suspected of discriminat-ing against veterans or the disabled.“Given the lack of justification for these

new measures, we will closely review allappropriate legal options available to protectemployers — who have already made sureveterans and the disabled are well represent-ed in the workforce — from billions inunneeded new regulatory costs.”




RULES from page 1

www.ConstructionEquipmentGuide.com

Rental Demand Has Remained Stronging firm based in Lexington, Mass.In the United States, the construction

market and consumer spending contin-ue to be the most important drivers ofgrowth of the equipment rental marketin 2013. “Though real nonresidential con-

struction is forecast to decline 0.8 per-cent, real residential construction isexpected to grow 8.2 percent, yieldingan overall real construction growth rateof 2.6 percent in 2013. Real consumerspending is projected to increase 1.9percent in 2013, with spending onrecreational services forecast to grow1.3 percent. These improvements willtranslate into increased revenue in allsegments of the equipment rental mar-ket,” according to the U.S. economicanalysis from the ARA Rental MarketMonitor.The construction and industrial

equipment segment is forecast to grow8.1 percent in 2013, while general toolsegment revenue is expected toincrease 5.4 percent over 2012. Partyand event rental revenue is forecast toincrease 2.4 percent. The second quar-ter of 2013 is projected to be the slow-est for the overall rental equipment

market compared with 2012, but quar-ter-on-quarter growth is forecast to pickup in the final two quarters of the year.The forecast for 2014 is more posi-

tive, calling for 9.2 percent growth inU.S. equipment rental revenue fol-lowed by 12.9 percent growth in 2015.By the end of 2017, equipment rentalrevenue in the United States is expect-ed to exceed $46.5 billion.In Canada, the equipment rental

industry is forecast to generate nearly$4.6 billion in revenue in 2013, a 2.8percent increase, and to continue grow-ing throughout the forecast to reachnearly $5.4 billion in rental revenue in2017.“As we look toward the third quarter

of the year, we continue to see signifi-cant growth opportunity in succeedingfuture years for equipment rental. Thedynamics of the economy drive thisindustry, along with individual man-agement initiative. Rental operatorsadeptly balance these factors to buildtheir rental revenue volume. Rentalpenetration continues its growth pat-tern, as the customer base relies onrental as a preferred business option,”said Christine Wehrman, ARA’s execu-tive vice president and CEO.

“The U.S. economy slowed morethan expected in the first half of theyear, but equipment rental demand hasremained strong. We have lowered ourgrowth expectations for 2013 modestlyto reflect this, but rental growth willstill handily outperform the overalleconomy. The path ahead still lookspromising with employment growthcontinuing and housing data coming instrong, which implies an improvingcommercial construction market to fol-low. Industrial markets, especiallythose tied to energy exploration andproduction, also should see growth,”said Scott Hazelton, a senior partnerwith IHS Global insight, which com-piles data and analyses for the ARARental Market Monitor.The ARA Rental Market Monitor is

a subscription-based service forAmerican Rental Association (ARA)members provided by ARA and RentalManagement as part of a partnershipwith IHS Global Insight.For more information, visit

www.ARArental.org. (This story also can be found on



guide.com.)

ARA from page 1


Phone: (315) 633-2944 • Fax: (315) 633-8010 • Syracuse, NY (Evenings) (315) 637-8912 www.lyonauction.com

Sales Managers & Auctioneers, Inc.

ALEX

LYON & SON

FRIDAY, OCT. 11 SATURDAY, OCT. 12 @ 9:30 AM

NOTE: Selling in this sale will be excess equipment from BelgiumEquipment & Construction.

EARLY HILITES: ARTICULATED HAUL TRUCK: Cat D400D, 2 HYDRAULIC

EXCAVATORS: Cat 235DLC, Cat 235B, MOTOR SCRAPER: Terex TS14B, 2 CRAWLER

TRACTORS: Cat D6RXW, JD 650G, CRAWLER LOADER: Cat 955K, 3 VIBRATORY

ROLLERS: (2) 2006 Bomag BW211D-3 (shell kit), 2006 Bomag BW124DH-3 (blade), AG

TRACTOR: IH 4366 (4x4), DETACHABLE TRAILER: 2007 Fontaine 55T Detachable (tri.,4th flip axle), TRUCK TRACTOR: 1997 Peterbilt (tri.), SERVICE TRUCK: Peterbilt w/10,000lb. crane (t/a), ATTACHMENTS: Excavators: Cat HD180S Hammer, Cat P130Pulverizer, Fleco Grapple, Cat 385HD Bucket, Cat 375HD bucket, Crawlers: Rockland RF-3D6R Root Rake, D*K Root Rake, Skid Steers: Smooth, Snow & Mulch Buckets, 66in.- 78in.Buckets, New Versatech Grapple Buckets, New Versatech Hay Spears, New Pallet Forks, NewFork Frames, New Versatech Brush Grapples, New Stump Buckets, PARTS: 637D parts and com-

ponents: 2 front trans., 3 rear trans., rebuilt hydraulic cylinders. Misc pins and parts, engines and engine

parts for Cat 3408s, 3406s and 3306s, MISC. PARTS/ ATTACHMENTS: IR 84in. Shell Kit, Cat 938F GPBucket, Cat Trans. Parts, Cat Engine Parts, Cat Scraper Cylinders, Cat Rebuilt Transmissions, Parts for 627& 637 Scrapers, Cat Push-Pull Arrangement, Cat Filters, Starters, Excavator Teeth, Cat Excavator Couplers,SHOP EQUIPMENT: Miller Spectrum 3080 Plasma Cutter, Miller Trailblazer 250G Welder, Miller S-32PWelder, Miller 200LE Welder, Miller CP300 Welder, Milelr DeltaWeld 45Z Welder, Miller Big 40G Welder,Parker 88C-082 SuperKrimp Hose Machine, Parker Parkrimp 2 Hose Machine, Climax BB5000 BoringMachine w/ Miller XMT304, OTC 5093 66 ton Jack, OTC 2000lb. Trans. Jack, Engine Stand for CatEngines, Band Saw, Drill Press, Jack Stands, Pallet Jack, Renegade Parts Washer, Tire Machine, (2) HotsyPressure Washers, Banding Cart, Torque Multiplier, Cat Machine Tools, Hand Tools, Misc. Nuts-Bolts –Fittings, Service Manuals & Parts Books, Lifting Devices, SUPPORT EQUIPMENT: (9) 8 ft. x24 ft.Trench Boxes w/ spreaders, (14) 8ft. x 20ft. x1in. Road Plates, (6) Stone Boxes, Laser w/ Tripods, GasGenerators, Water Pumps, Jack Hammers, Hoe Packs, Reversible Plate Compactors, Jumping Jacks,Concrete Finishers, Misc. Tires & Rims, Manhole Testing Pumps, Pipe Plugs, Stihl Cutoff Saws.

Address: 178 N. Royal Ave. Belgium, WI 53004.

REGISTERED WI AUCTION FIRM: #223-053 Alex Lyon & Son, Sales Managers & Auctioneers, Inc.

REGISTERED WISCONSIN AUCTIONEER: #1878-052 Jack Lyon

COMPLETE LIQUIDATIONAND RETIREMENT

AUCTIONBelgium Equipment And Construction

BELGIUM, WISCONSIN

CONSTRUCTION EQUIPMENT, ATTACHMENTS. LARGE QUANTITY OFTOP NOTCH SUPPORT

EQUIPIMENT. AUCTION

NOTE: Selling in this sale will be 3 Job Completions from the immediatearea.

EARLY HILITES: 6 ARTICULATED HAUL TRUCKS: (5) 2005-2004 Cat 740 (tailgates), 4HYDRAULIC EXCAVATORS: Kobelco SK330LC, 2005 Kobelco SK235SLC, 2004 KobelcoSK115SR (blade), Kobelco SK35SR, MOTOR GRADER: Cat 140G, 5 RUBBER TIRED LOAD-ERS: 2006 Case 821C, 2007 Case 721E, 2006 Volvo L60E, 2006 JD 544J, 2006 JD 244J, 4CRAWLER TRACTORS: 2006 JD 650JLGP, 2006 JD 550JLGP, 2006 Case 1650K (cab), 2006Case 850KXLT-II (cab), CRAWLER LOADER: Cat 963C, 2 SOIL COMPACTORS: (2) Cat 825B,VIBRATORY ROLLER: IR SD100D, 4 RUBBER TRACKED SKID STEERS: (2) 2006 NHC190, 2007 Case 450, 2007 Case 440, SKID STEER: Case 440, 2 ROUGH TERRAIN FORK-LIFTS: (2) 2005 Case 586G, 3 TELESCOPIC FORKLIFTS: (3) Gehl 883, AG TRACTORS: (3)2009 Cat MT965C (4x4), GENERATOR: Multiquip DCA45 (970 hrs.), 7 LIGHT PLANTS: (2)2012 Magnum MLT3060K, (2) 2005 Coleman RL4000, 2006 Allmand NL7.5, 2011 Terex RL4, 2005Wacker LT4, WATER TRUCK: 1976 Mack R686ST (t/a), 2 DUMP TRUCKS: 1996 Mack RD690(t/a), 1986 GMC 3500 (s/a), 3 TRUCK TRACTORS: (2) 2009 Kenworth T800 (tri.), 1996 WesternStar (tri.), DRILLING RIG TRUCK: 1986 Dodge 350 (4x4), 3 FLATBED TRUCKS: 2005 FordF450, IH 4700 (s/a), IH F450R, SERVICE TRUCK: 2002 Ford F450XL (s/a), 3 PICKUPS: Dodge3500, 1992 GMC 3500, 2003 Chevy 2500 (4x4), 3 DETACHABLE TRAILERS: 2013 Witzco RG5050 Ton (tri.), 2006 Talbert 55 Ton (tri.), 2006 Talbert 50 Ton (tri.), 2 TAGALONG TRAILERS: 10Ton (t/a), Load Trail 14,000lb. (t/a), 2 OFFICE TRAILERS: 36ft. x 10ft., Daco (s/a) , ATTACH-MENTS: Harley Rake, Sweepster, Buckets, Grapple Buckets, SUPPORT EQUIPMENT: RoadPlates, Trench Boxes, Stone Box.

DIRECTIONS: From General Mitchell Int’l Airport in Milwaukee: (approx. 20 min.), take I-94S to Exit 333, Hwy 20. Proceed to East Frontage Rd., go South to auction site on left.

From Chicago O’Hare Field: (approx. 45 min.), take I-294 N to I-94 N. Proceed to Exit 333, Hwy20E, continue to East Frontage Road.

Address: 1755 S. E. Frontage Road, Sturtevant, WI 53177.

SITE PHONE: 262-886-2778, (262) 903-6269, SITE FAX: 262-886-2369

REGISTERED WI AUCTION FIRM: #223-053 Alex Lyon & Son, Sales Managers & Auctioneers, Inc.

REGISTERED WISCONSIN AUCTIONEER: #1878-052 Jack Lyon

COMPLETE LIQUIDATIONAND RETIREMENT AUCTION FOR

GRAHAM & ASSOCIATES, LLC

RACINE, (STURTEVANT)WISCONSIN

CONSTRUCTION RENTALS, ATTACHMENTS, SUPPORT, TRUCKTRACTORS, DUMP

TRUCKS, PICKUPS, ALLTYPES OF TRAILERS. AUCTION


ADVERTISER INDEX

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

ALEX LYON & SON INCMILWAUKEE WI / RACINE WI ............................................109

ALEX PARIS CONTRACTING CO INC ............................................9ALLU GROUP ................................................................................39AMERICAN STATE EQUIPMENT ....................................................7ANACONDA USA............................................................................65APPLIED LASER TECHNOLOGY ..................................................35ARING EQUIPMENT CO INC ........................................................15ASC CONSTRUCTION EQUIP USA..........................................10,11ASPEN EQUIPMENT......................................................................43ATLAS COPCO ..............................................................................63BANDIT INDUSTRIES INC ............................................................69BARGAINS ................................................................................96,97BOBCAT ENTERPRISES................................................................28BOSS PRODUCTS ........................................................................42CAT AUCTION SERVICES

DETROIT MI ........................................................................107CATERPILLAR ................................................................................72CEG SCALE MODELS....................................................................24CK POWER ....................................................................................30CLASSIFIEDS ................................................................................94COMPANY WRENCH ....................................................................23CONEXPO ......................................................................................29CONSTRUCTION EQUIPMENT GUIDE

WANTED ................................................................................99CONEX/CONAGG ..................................................................95REACH YOUR MARKET........................................................46OFF ROAD TRUCK PROMO ................................................34NEWSLETTERS ....................................................................58

DON SMOCK AUCTION COPENDLETON IN ..................................................................102

DOOSAN INFRACORE AMERICA CORP ......................................56DOOSAN PORTABLE POWER ......................................................53DOPPSTADT ..................................................................................68DYNAPAC........................................................................................78EAGER BEAVER TRAILERS..........................................................87ERB EQUIPMENT ..........................................................................13FABCO EQUIPMENT INC ................................................................2FARM-RITE EQUIPMENT INC..........................................................8FELLING TRAILERS ......................................................................84FINKBINER EQUIPMENT CO ..........................................................7FLANGE LOCK ..............................................................................20FLUID CONTROL SERVICES ........................................................35FREY & SONS IN

METAMORA MI ....................................................................102FURY MOTORS ..............................................................................45GARY CARLSON EQUIPMENT......................................................21GRINDERCRUSHERSCREEN.COM..............................................62GROVE WORLDWIDE....................................................................80HINIKER NORTHEAST ..................................................................47HORST WELDING/HLA ATTACHMENTS ......................................44HOWELL TRACTOR & EQUIPMENT CO ................................39,112HYDRAULICIRCUIT TECHNOLOGY..............................................39

ILLINOIS TRUCK & EQUIPMENT ....................................................3INDECO NORTH AMERICA............................................................66IRAY AUCTION ............................................................................108IROCK CRUSHERS........................................................................64IRON PLANET ..............................................................................103JEFF BELZERS CHEVROLET ..................................................86,90JOHN DEERE ................................................................................59KAWASAKI CONSTRUCTION MACHINERY ................................79KLEEMAN ......................................................................................71KOBELCO CONST MACHINERY ..................................................17KOMATSU AMERICA CORP ..........................................................50KPI-JCI ............................................................................................74KUBOTA ..........................................................................................81LEADING EDGE ATTACHMENTS INC ..........................................38MCCANN INDUSTRIES INC ............................................................6MESSICKS ......................................................................................30METSO MINERAL CRUSHING ......................................................67METSO MINERAL SCREENING ....................................................75MID COUNTRY MACHINERY ........................................................14MIDWEST VIBRO INC ....................................................................26MOBILE TRACK SOLUTIONS........................................................26MUSTANG MFG..............................................................................52NITKE SALES INC

WISCONSINS ANNUAL AUCTION ......................................108NORAM ..........................................................................................55NPK CONSTRUCTION EQUIPMENT INC ....................................31PINNACLE CRANES ......................................................................28POWERSCREEN MW DEALER ....................................................70PURPLE WAVE INC

INTERNET AUCTIONS ........................................................101RANSOME EQUIPMENT SALES LLC............................................99RDO EQUIPMENT/SCHARBER EQUIPMENT ..............................19RITCHASON AUCTIONEERS

LEBANON TN ......................................................................102RITCHIE BROS. AUCTIONEERS ..........................................105,111ROAD BUILDERS MACHINERY..................................................6,25ROGERS BROTHERS CORP ........................................................93ROLAND MACHINERY INC..............................................................5RUFFRIDGE-JOHNSON EQUIPMENT CO....................................64SENNEBOGEN ..............................................................................77SIDUMP'R ......................................................................................89SMITHCO ........................................................................................93STAR EQUIPMENT LTD ..................................................................6STARR PARTS & EQUIPMENT......................................................38SUPERIOR INDUSTRIES ..............................................................63TEREX CRANES ............................................................................49THE G W VAN KEPPEL CO ..........................................................20TITAN RENTS ................................................................................30TOWMASTER INC ........................................................................91UNITED RENTALS..........................................................................27WINCHES INC ................................................................................35ZIPS TRUCK EQUIPMENT ............................................................90

To read articles about these CEG advertisers, visit www.constructionequipmentguide.com


Unreserved public auctions

33,1 items

rbauction.com | 1.800.211.3983

Featured upcoming auctionsSt. Louis, MO September 19Fort Worth, TX September 25-26Minneapolis, MN September 27Kansas City, MO October 1Chicago, IL October 3Hammond, LA October 17Shreveport (Sibley), LA October 24

Bid with confidence▸ No minimum bids or reserve prices▸ Up to 100% financing available▸ Inspect and bid in person or online

Sell your equipmentCall today–any number of items accepted.

More items added dailyVisit rbauction.com to see all auctions and up-to-date listings.

Featured items in North America660+ excavators300+ crawler tractors340+ wheel loaders140+ motor graders220+ loader backhoes220+ skid steer loaders130+ articulated dump trucks110+ Mini excavators and much more...

Auction Firm License # 444.000193, Auctioneer Greg M. Highsmith # 441.000865, Auctioneer Gregory S. Fuqua # 13957, Motor Vehicle Dealer License #DLR25867, Auctioneer Frederick R. Vilsmeier # 7012018, Auction Firm License # 444.000193*No payments for 90 days is a limited time offer from Ritchie Bros. Financial Services. Financing is subject to credit approval and qualified equipment or assets. Minimum contract term of 24 months and qualifying assets valued at $10,000 or higher. Offer is available for deals booked and funded by December 31, 2013, and for items purchased by US or Canadian businesses or sole proprietors at Ritchie Bros. auctions occurring from September 1, 2013 to December 31, 2013 only. First payment will be reflective of date of invoice and at the sole discretion of Ritchie Bros. Financial Services. Additional terms and conditions apply. Contact Ritchie Bros. Financial Services for more information.

MINNEAPOLIS

N7

60 TO860 TCHTLLTEB-KNIL 2TEMBEREPS –MN,MINNEAPOLIS

O2008 K2– F1 OASKANS

P1

G5 L-1XP65 DUTSAATSMOOBER OCT– MO,YY,ITTY C

DEERE J JOHN1TEMBER

102EPS –MO,OUISL.TS

K9

425 DEERE 1TEMBER MINNEAPOLIS

H J 426 DEERE JOHN–7

2 OF1 2TEMBEREPS –MN,MINNEAPOLIS

5 TX

002,THORWTFOR

T J XLLTH007 DEERE JOHN562-52TEMBEREP S– TX

oming pcued rred uateFMOs, ouiL. St

C9

35 9TERPILLARCAATERPILLAR5002 1TEMBEREPS –MO,OUISL.TS

sauctionoming 91ber emSept

.TS

Norin semited rred uateFFe660+ rstoaavcex

XL9

R6DTERPILLARCAATERPILLAR 1TEMBEREPS –MO,OUISL

Bid ▸

aicAmerth Nor

TXOF1

,THORWTFOR

eonfidenccith wBid price vserveror sidbm minimuNo

D6

29 9TERPILLARCAATERPILLAR– 22-52TEMBEREP S– TX

sepric

MOs, ouiL. StTXth, orWWortorF

MN s, liapoMinneMO, ityy, CsasanK

IL, oaggohicCLAHammond,

ley), b(SiteporevveporShr

91ber emSept25-26ber emSept

27ber emSept1ber oOct3ber oOct71ber oOct

LA 42ber oOct

660+ rstoaavcex300+ soractrtwler arc340+ saderlowheel140+ sadergror mot220+ shoekacbader lo220+ saderloeer tsid ks130+ ructmp dued atluticar110+ and soratvacxeMini

▸ ▸

SelC

MorVisiand

skruce...morh mucand

price vserveror sidbm minimuNo ablaivaing ancfin100% o tUp

onor son perin id band pectIns

equipmentr ouyyoulSelemsitofber mnuyan–yaodtlal

lyaidadded semite More t Visi omauction.crb auctionslalsee o t

s.tingslie ato-dp-tuand

sepricle

lineon

ed.eptcacems

auctions

om auction.crb

g M. HighsmiteGrerionectAuion Firm License # 444.000193, ctAuitcom Rfrerfime of a limited ts iays 90 dorfs*No payment

Septemberom frg urrinc ocionsct. ausorhie Bitc R atsoroprietpr

om | 11.39831.800.2

orotuqua # 13957, M. FSory geGrerionectAuh # 441.000865, g M. Highsmit and qualified equipmentalvopr apeditro c tectjubssg iinanc. FinicesvvSeralianc. Finsorhie Bitc

ectefl be rlli w w paymentts. Firlyy. Fir 31, 2013 ono December 1, 2013 tSeptember

V

11.3983

smeierliV R. kederic FrerionectAuR25867, License #DLerale DelehicVVehicor and qualifyinhs 24 mont term of f 24 montactontrinimum c. Mssets a or and qualified equipmentalianc. Finsorhie Bitc Rion of f Retrcse dilsohe toice and at invate of f inv dive of f dect

ion Firm License # 444.000193ctAu # 7012018, deorfe abllaiv as ierffff. O higher $10,000 ored ataluvssetsg a and qualifyin. Finsorhie Bitc RactontC. plyy. apionsondit and c termsalionditAd. icesvSer

sed by Uahcur p itemsorf 31, 2013, and nded by Decemberuf booked and sal de

ion.atorme inf mororficesvSeralianc. Fin

elso orsesinessuan bdiaanC orSsed by U


Date post:	28-Mar-2016
Category:	Documents
Upload:	construction-equipment-guide
View:	360 times
Download:	13 times

Midwest 19 2013

Documents