HYDROMAX® - 2018
The Engineered Rainwater Solution MIFAB® HYDROMAX® Siphonic Roof Drainage System
LIT-082
www.mifab.com
MIFAB®, Inc. 1321 West 119th Street, Chicago, Illinois 60643-5109, USA • Toll Free 1-800-465-2736, Fax 1-773-341-3049 www.mifab.com • [email protected] • Canada Toll Free: 1-800-387-3880
Go towww.mifab.com
for the mostcurrent product
specificationsheets.
The World is Awakening to A New Dawn in Drainage
CERTIFIED MANAGEMENT SYSTEM
ISO 9001:2015
MIFAB® Inc. HYDROMAX®, 1321 West 119th Street, Chicago, Illinois 60643-5109, USA Visit www.hydromax.com/faqs.php for the most frequently asked questions.
USA Toll Free: 1-800-465-2736 • Fax: 1-773-341-3049 Canada Toll Free: 1-800-387-3880 • [email protected]
A New Dawn in DrainageLeaders in Siphonic Drainage
• Cost savings of 25 to 45% – Smaller Pipe Size• IPC 2015 compliant – All MIFAB® HYDROMAX® drains have ponding graphs and GPM of
the drain from testing to ASME A112.6.9• Ideal for primary & secondary overflow roof drainage.• Eliminate trenching under building floor.• Labor Savings
• Horizontal pipes installed FLAT, NO SLOPE, works in the BIM model and provides space savings.
• Less Ponding• Flexibility in routing – frees up building space.• Fewer downpipes with smaller diameters• Rainwater Management – easier routing to Retention Ponds or Rainwater Harvesting
Benefits of Incorporating a MIFAB® HYDROMAX® Siphonic Roof Drain System
Architectural Benefits
Walmart
EMBRY-RIDDLE
Sam's Club
Marina Heights
Marriott
Forest Park Medical Ctr - Dallas
Mercy West Lakes Hospital
Capitol District - Omaha
Phoenix Sky Harbor
1
MIFAB® Inc. HYDROMAX®, 1321 West 119th Street, Chicago, Illinois 60643-5109, USA Visit www.hydromax.com/faqs.php for the most frequently asked questions.
USA Toll Free: 1-800-465-2736 • Fax: 1-773-341-3049 Canada Toll Free: 1-800-387-3880 • [email protected]
A New Dawn in Drainage A New Dawn in DrainageLeaders in Siphonic Drainage
System Comparison
Four Flow Patterns of Siphonic Drainage
Water in annular flow
Traditional Gravity MIFAB® HYDROMAX® Siphonic
HYDROMAX® pipe diameters half the size of gravity
Priming of Main Pipe Work
Stage 1 Stage 2 Stage 3 Stage 4Plug flow Bubble flow Full- bore flow
Air pockets driven down pipework
Plug of water filling whole pipe at high velocities which achieves
self-cleansing.
Tests have shown that self- cleansing can be achieved at as low as 10% to 15% of the design
rainfall rate.
Gravity flow in pipework
Air above water
Air bubbles in suspension carried at high velocity
Water filling whole pipe
Water filling whole pipe
No more air entry – Air within Pipe now Fully
Purged
air core
No Airwat
er
air core
wat
er
wat
er
Applicable Standards: • ASME A112.6.9• ASPE / ANSI 45: 2013
Go to www.hydromax.com to view videos. Go to www.mifab.com to view specification sheets.
2
Light Rainfall - Wavy or Gravity flow
MIFAB® Inc. HYDROMAX®, 1321 West 119th Street, Chicago, Illinois 60643-5109, USA Visit www.hydromax.com/faqs.php for the most frequently asked questions.
USA Toll Free: 1-800-465-2736 • Fax: 1-773-341-3049 Canada Toll Free: 1-800-387-3880 • [email protected]
A New Dawn in DrainageLeaders in Siphonic Drainage
Part # MH-200 2" Terrace Drain
Part # MH-505-G 5" Gutter Drain
(Stainless Steel Spun Body)
Part # MH-300 Roof Drain Assembly
(3" NH, 4" NH, 5" NH, 6" NH)
Part # MH-TSiphonic Trench Assembly
Part #'s MH-F1460, MH-F1580 Siphonic Gravity Break Drain
Part # MH-301 Overflow Roof Drain
(3" NH, 4" NH, 5" NH, 6" NH)
All MIFAB® HYDROMAX® drains are IAPMO listed.
Part # MH-301-M Inducer Guard
(3" NH, 4" NH, 5" NH, 6" NH)
Part # MH-PG-D Parking Garage/Deck Drain
(3" NH, 4" NH, 5" NH)
Part # MH-505-G-OF 5" Gutter Overflow Drain
(Stainless Steel Spun Body)
Part # MH-205-G 2" Gutter Drain
(Stainless Steel Spun Body)
Part # MH-305-G 3" Gutter Drain
(Stainless Steel Spun Body)
MIFAB® HYDROMAX® Drain/Cover Options
3 MIFAB® Inc. HYDROMAX®, 1321 West 119th Street, Chicago, Illinois 60643-5109, USA Visit www.hydromax.com/faqs.php for the most frequently asked questions.
USA Toll Free: 1-800-465-2736 • Fax: 1-773-341-3049 Canada Toll Free: 1-800-387-3880 • [email protected]
MIFAB® Inc. HYDROMAX®, 1321 West 119th Street, Chicago, Illinois 60643-5109, USA Visit www.hydromax.com/faqs.php for the most frequently asked questions.
USA Toll Free: 1-800-465-2736 • Fax: 1-773-341-3049 Canada Toll Free: 1-800-387-3880 • [email protected]
A New Dawn in Drainage A New Dawn in DrainageLeaders in Siphonic Drainage
330'
180'
Traditional Gravity System1,600 Feet of Pipework In Diameters 6” to 18”
MIFAB® HYDROMAX® SolutionOnly 1,000 Feet of Pipework in Diameters 3” to 8”Pipes run flat to design team's chosen down pipe location.
Reduction in civils
Building size 59,400 Square Feet
Types of locations where MIFAB® HYDROMAX® may be installed
Creighton Dental Multi-Level Parking Garage. MIFAB® HYDROMAX® pipework installed absolutely flat and at a higher level.
4
MIFAB® Inc. HYDROMAX®, 1321 West 119th Street, Chicago, Illinois 60643-5109, USA Visit www.hydromax.com/faqs.php for the most frequently asked questions.
USA Toll Free: 1-800-465-2736 • Fax: 1-773-341-3049 Canada Toll Free: 1-800-387-3880 • [email protected]
A New Dawn in DrainageLeaders in Siphonic Drainage
Disney Springs – OrlandoDisney Springs
Part # No Hub Outlet K Factor Min GPM Max GPMMH-200 2" SS Terrace 0.02 23 190MH-205-G 2" SS Gutter 0.37 23 155MH-305-G 3" SS Gutter 0.14 23 304MH-505-G 5" SS Gutter 0.04 120 1280MH-505-G-OF 5" SS Gutter Overflow 0.07 120 1280MH-300 3" C.I. Drain Assy 0.05 23 415MH-400 4" C.I. Drain Assy 0.07 75 750MH-500 5" C.I. Drain Assy 0.06 120 1280MH-600 6" C.I. Drain Assy 0.11 160 1820MH-301 3" C.I. Overflow Drain Assy 0.095 23 415MH-401 4" C.I. Overflow Drain Assy 0.12 75 750MH-501 5" C.I. Overflow Drain Assy 0.11 120 1280MH-601 6" C.I. Overflow Drain Assy 0.14 160 1820
Primary and Overflow Drains
IPC 2015 CodeSECTION 1105 - ROOF DRAINS1105.2 Roof drain flow rate. The published roof drain flow rate, based on the head of water above the roof drain, shall be used to size the storm drainage system in accordance with Section 1106. The flow rate used for sizing the storm drainage piping shall be based on the maximum anticipated ponding at the roof drain.
SECTION 1108 - SECONDARY (EMERGENCY) ROOF DRAINS1108.2 Separate systems required. Secondary roof drain systems shall have the end point of discharge separate from the primary system. Discharge shall be above grade in a location that would normally be observed by the building occupants or maintenance personnel.
Strom Drainage System Research ProjectFLOW RATE THROUGH ROOF DRAINS
RESEARCH
FOUNDATION
5
MIFAB® Inc. HYDROMAX®, 1321 West 119th Street, Chicago, Illinois 60643-5109, USA Visit www.hydromax.com/faqs.php for the most frequently asked questions.
USA Toll Free: 1-800-465-2736 • Fax: 1-773-341-3049 Canada Toll Free: 1-800-387-3880 • [email protected]
A New Dawn in Drainage A New Dawn in DrainageLeaders in Siphonic Drainage
Competitor's “High Performance” Gravity Drain
Discharge (GPM)
Water Depth Above Drain
(Inches)471 2.8667 3.6817 3.8943 4.1
1156 6.71335 7.31493 7.31636 6.91768 7.11890 7.42005 8.52114 10.42316 13.02502 15.82675 19.12758 20.02916 21.8
Ponding for 1200 GPM for MIFAB® HYDROMAX® 5” drain is 3.45”MIFAB® HYDROMAX® results in lower ponding on the roof
Gravity 10” Drain – Depth = 7.0” to Discharge 1200 GPM
This gravity drain ponds at TWICE the depth of a MIFAB® HYDROMAX® MH-500.
0 500 1000 1500 2000 2500 3000
5
0
10
15
20
25
Discharge (GPM)
Wat
er D
epth
Abo
ve (i
nche
s)
10" High Capacity Roof Drain
Ponding curves of HYDROMAX®
Flow Rate (GPM) Flow Rate (GPM)
Wat
er D
epet
h (in
ches
)
Wat
er D
epet
h (in
ches
)
Flow Rate (GPM)
Wat
er D
epet
h (in
ches
)
Flow Rate (GPM)
Wat
er D
epet
h (in
ches
)
MIFAB® HYDROMAX® 3-inch
MIFAB® HYDROMAX® 5-inch MIFAB® HYDROMAX® 6-inch
MIFAB® HYDROMAX® 4-inch
0.0 50 100 150 200 250 300 350 400 0.0 100 200 300 400 500 600 700 800
2.5
2.0
1.5
1.0
0.5
0.0
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
0.0 200 400 600 800 1000 1200 1400
5.04.54.03.53.02.52.01.51.00.50.0
0.0 500 1000 1500 2000
6
MIFAB® Inc. HYDROMAX®, 1321 West 119th Street, Chicago, Illinois 60643-5109, USA Visit www.hydromax.com/faqs.php for the most frequently asked questions.
USA Toll Free: 1-800-465-2736 • Fax: 1-773-341-3049 Canada Toll Free: 1-800-387-3880 • [email protected]
A New Dawn in DrainageLeaders in Siphonic Drainage
Siphon Breaks
Flare out discharge pipework 10 x siphonic pipe diameter in length from manholesized for open channel gravity flow (Expect at least 2 step-ups in diameter.)
MIFAB® HYDROMAX® MH-F1460 up to 6"MIFAB® HYDROMAX® MH-F1580 8" to 12"
D
10 x D
Grade (Asphalt)
Gravity Sized Discharge
Manhole or Catch Pit
Manhole or Catch Pit to have Grate CoverFree area for the Grate Cover should betwice cross sectional area of siphonic pipe.
HYDROMAX® Siphonic Downpipe
Siphonic Dia..
Length = 10 x Siphonic Dia.
Flare out discharge pipework 10 x siphonic pipe diameter in length from manholesized for open channel gravity flow (Expect at least 2 step-ups in diameter.)
GravityStormSewer
Siphonic Break in Vertical
Ventilated toAtmosphere
Recommended vent sizebeing two-thirds gravitypipe size (2/3 air to 1/3water in the gravity flow)
Break toGravity Flow
Siphonic Flow
7
MIFAB® Inc. HYDROMAX®, 1321 West 119th Street, Chicago, Illinois 60643-5109, USA Visit www.hydromax.com/faqs.php for the most frequently asked questions.
USA Toll Free: 1-800-465-2736 • Fax: 1-773-341-3049 Canada Toll Free: 1-800-387-3880 • [email protected]
A New Dawn in Drainage A New Dawn in DrainageLeaders in Siphonic Drainage
MIFAB® HYDROMAX® software with FAIL – PASS
Easy to use graphic input and choice of piping materials.Design engineer optimizes sizing to achieve PASS in full compliance with ASPE/ANSI 45.Please note: All lengths above have been rounded up as follows: CI no-hub – 10 feet.
BILL OF MATERIAL DESCRIPTION DIAMETER
(Inches)QUANTITY
(feet)CI no-hub MH-300 with Dome (23 to 415 GPM) 5CI no-hub Hubless Cast Iron Pipe 2” 2 30CI no-hub Hubless Cast Iron Pipe 3” 3 60CI no-hub Hubless Cast Iron Pipe 4” 4 90CI no-hub Hubless Cast Iron Pipe 6” 6 50CI no-hub Hubless Cast Iron Pipe 8” 8 40
eachCI no-hub eigth bend 2” 2 1CI no-hub eigth bend 3“ 3 2CI no-hub eigth bend 5” 5 2CI no-hub eigth bend 8“ 8 1CI no-hub Quarter bend - short sweep 2” 2 4CI no-hub Quarter bend - short sweep 3” 3 3CI no-hub Quarter bend - short sweep 5” 5 1CI no-hub Quarter bend - short sweep 6” 6 1CI no-hub Quarter bend - short sweep 8” 8 3CI no-hub Coupling 2” 2 25CI no-hub Coupling 3” 3 34CI no-hub Coupling 5” 5 20CI no-hub Coupling 6” 6 11CI no-hub Coupling 8” 8 16CI no-hub Reducer 3/2” 10CI no-hub Reducer 5/3” 2CI no-hub Reducer 6/5” 1CI no-hub Reducer 8/5” 1CI no-hub Reducer 8/6” 3CI no-hub 45” Y branch 5/3” 2CI no-hub 45” Y branch 6/3” 1CI no-hub 45” Y branch 8/5” 1CI no-hub Access Point 8” 1
No. Type Material Diameter (inches)
Length (feet-inches)
HEIGHT (feet-inches) XYZ Flowrate
(gpm)Velocity (ft/sec)
Headloss (ft)
Pressure (ft)
0 Discharge 10 2609.388 10.659 1.765 01 Pipe CI-No-Hub 10 3' 1 1/2" -X 2609.388 10.659 0.133 0.1332 Pipe CI-No-Hub 10 3' 1 1/2" -X 2609.388 10.659 0.133 0.2653 90o radius bend CI-No-Hub 10 2609.388 10.659 0.53 0.7954 Expansion CI-No-Hub 8 2609.388 10.659 0.607 -1.2755 Pipe CI-No-Hub 8 9' 7" 9 7 +Z 2609.388 10.659 1.352 -9.5066 Reducer CI-No-Hub 8 2609.388 10.659 0.74 -8.7667 Pipe CI-No-Hub 8 19' 2" 19 2 +Z 2609.388 10.659 0.814 -24.4438 90o radius bend CI-No-Hub 10 2609.388 10.659 0.53 -23.9139 Pipe CI-No-Hub 10 11' -X 2609.388 10.659 0.467 -23.44610 Pipe CI-No-Hub 10 11' -X 2609.388 10.659 0.467 -22.97911 Junction CI-No-Hub 10 3157.041 8.811 0.077 -22.343
Element Type
Object Pipe DrainMaterialDiameter
Cl no-hub
3”
Direction and Angle
Length:Slope: feet-inches
Insert Add
Hydraulic Calculation Summary
Out ofBalanceMinimumPressureMaxiumPressureMinimumVelocity
MinimumVerticalVelocityMaximumVelocity
DischargeVelocity
Fill time
Pass/Fail?
Tail Pressures
X Y Z+0-
Previous Current8.303 ft
-25.878 ft
7.302 ft
6.898ft/sec
7.292ft/sec25.281ft/sec18.838ft/sec40 seconds
FAIL-1.938 ft-0.645 ft1.111 ft
-8.948 ft-1.292 ft
12345
Close
1.293 ft
-25.878 ft
7.302 ft
6.898ft/sec
7.292ft/sec25.281ft/sec18.838ft/sec40 seconds
PASS-1.938 ft-0.645 ft1.111 ft
-0.817 ft-1.292 ft
12345
.
•
•
•
•
Z
X
Y-X
-Y
224.4 gpm
224.4 gpm
224.4 gpm
Discharge
8
MIFAB® Inc. HYDROMAX®, 1321 West 119th Street, Chicago, Illinois 60643-5109, USA Visit www.hydromax.com/faqs.php for the most frequently asked questions.
USA Toll Free: 1-800-465-2736 • Fax: 1-773-341-3049 Canada Toll Free: 1-800-387-3880 • [email protected]
A New Dawn in DrainageLeaders in Siphonic Drainage
Independent 3rd party certification on MIFAB® HYDROMAX® HydroTechnicTM software.
9
MIFAB® Inc. HYDROMAX®, 1321 West 119th Street, Chicago, Illinois 60643-5109, USA Visit www.hydromax.com/faqs.php for the most frequently asked questions.
USA Toll Free: 1-800-465-2736 • Fax: 1-773-341-3049 Canada Toll Free: 1-800-387-3880 • [email protected]
A New Dawn in Drainage A New Dawn in DrainageLeaders in Siphonic DrainageIn order to correctly design a MIFAB® HYDROMAX® Siphonic roof drain system the following information is needed:
1. Design rainfall rate (inches per hour).2. Piping material: Schedule 40 solid wall PVC or Cast Iron (If PVC, specify sizes you have
access to).3. For quicker turnaround time (2-3 days).
Fully dimensioned Isometric drawing of each system with GPM’s at each drain location.4. For a standard turnaround time (no. of days dependent on complexity and size).
A. Plans showing or that can help us determine and fully dimension the following (In AutoCAD .DWG file format only. We can’t use .PDF files).
i. Catchment areas or the GPM’s per drain location (Roof Plans).ii. Preferred piping routes and discharge points (Floor Plans directly below roof.).iii. Elevation from drain to horizontal.iv. Elevation from horizontal to discharge.
5. Name, address, contact details including email address of Engineer of record or Design Build Contractor (Please include all contact info in order to set up access to HydroTechnic software).
6. Project title.7. Project address (City, State & Zip at minimum).8. Confirmation of below grade being designed to free flow or surcharge
(If surcharging, we need to know the height between the center of siphonic horizontal line at discharge to the manhole grate cover).
The provision of all the above requested information allows MIFAB® to assist with your siphonic roof drainage design.We will provide access to our MIFAB® HydroTechnicTM analytical design calculation software for the Engineer of Record, designer and contractor as directed by the EoR. Within HydroTechnic® you can access the hydraulic calculation, edit the design, print the design calculation report, BOM and drawing files. All dimensions, GPM’s, Routes, Pipe Materials, etc. should be verified by Engineer of Record.Please contact us at [email protected] at any time for assistance.
We offer full-time FREE design support. Our experience includes 1,000 Walmarts!www.hydromax.com
ADDITIONAL LITERATUREUnderstanding HYDROMAX® Siphonic Roof Drainage, www.mifab.com • www.hydromax.com
10MIFAB® Inc. HYDROMAX®, 1321 West 119th Street, Chicago, Illinois 60643-5109, USA Visit www.hydromax.com/faqs.php for the most recent product information.
USA Toll Free: 1-800-465-2736 • Fax: 1-773-341-3049 Canada Toll Free: 1-800-387-3880 • [email protected]
CONTACT INFORMATION
Brennan Doherty
Design Team
Bill [email protected](312)-241-5224
[email protected](903) 200-4748
Product/Siphonic Design Engineer(773) [email protected]
HYDROMAX® - 2018
The Engineered Rainwater Solution MIFAB® HYDROMAX® Siphonic Roof Drainage System
LIT-082
www.mifab.com
MIFAB®, Inc. 1321 West 119th Street, Chicago, Illinois 60643-5109, USA • Toll Free 1-800-465-2736, Fax 1-773-341-3049 www.mifab.com • [email protected] • Canada Toll Free: 1-800-387-3880
The World is Awakening to A New Dawn in Drainage
CERTIFIED MANAGEMENT SYSTEM
ISO 9001:2015
Download a copy of this catalog to your
mobile device.
CONTACT INFORMATIONBrennan [email protected] (312)-241-5224
Bill [email protected](903) 200-4748
Design TeamProduct/Siphonic Design Engineer
(773) [email protected]