Military Accessories for
Russian MotorcyclesPart III (D): Machine Gun Pintles
Ernie [email protected]
02/2010
What in the World is a Pintle? Or Pintle-Mount?
•Used with Mounting Hardware that Mates the Machine Gun to a Vehicle or Tripod•Essentially the Pintle is a Bracket with a Cylindrical Bottom and a Cradle for the Gun on Top•Cylindrical Bottom Fits into Hole in the Tripod, while the Cradle Holds the Gun•Pintle Can Also Be Used to Refer to the Pin or Bolt Usually Inserted into a Gudgeon, which Is Used as Part of a Pivot or Hinge•Machine Guns Usually Mounted on Pintle Mount–Pintle Mount Is Steel Post Connected to the Frame
A pintle is used to transition the machine gun cradle to the machine gun mount (steel pipe).
2
1. MG Holder (pintle), Inserted into #2 or #3 Mount
2. Front Support Tube for MG-holder or Searchlight
3. Rear Support Tube (www.ural.de)
Both the front-corner (2) and rear (3) machine gun mounts accept the same pintle (1).
A pintle-mount is used with machine
guns as the mounting hardware that
mates the machine gun to a vehicle or
tripod. Essentially the pintle is a rod with
a cradle for the gun on top.
3
Pintle for MB-750/ MT-12
Pintle
The pintle adapts the machine gun cradle to the front or rear machine gun mount (steel pipes).
4
Russian Dnepr MB-750 (www.avtoall.ru)
Part # Description Description in Russian Quantity
201418 Bolt M6x16 fastening the glass
to the slats
Болт М6х16 крепления стекла к планкам 8
201474 Bolt of fastening of a back
guard to a frame
Болт крепления заднего щитка к раме 4
221577 Screw M5x10 fastening latch Винт М5х10 крепления защелки 2
250508 Nut of screw for fixing the
license plate bracket
Гайка винта крепления кронштейна
номерного знака
8
252001 Washer punch 3.5 clamp base
clamps
Шайба штампованная 3,5 крепления
основания хомута
2
252005 Washer for fastening the rear
panel to the frame
Шайба болта крепления заднего щитка к
раме
4
258041 Cotter pin 3x32 for securing
the clamp base nut
Шплинт 3х32 стопорения гайки основания
хомута
1
7222062 Swivel stand Стойка вертлюга 1
7222304 Stopper Стопор 1
7222305 Axle rack Ось стойки 1
7222306-Б Nut Гайка 3
7222311 Latch Защелка 1
7222365 Axis Ось 2
ВП22060 Swivel Вертлюг 1
ВП22300 Pin Штырь 1
ДП01230 Hook with hook assembly Хомут с крючком в сборе 1
ДП01251 Screw Винт 15
Machine Gun Pintle
The pintle adapts the machine gun to the vehicle mount (empty pipe).
Machine Gun Cradle
Machine Gun Mount
6
DP-28 Machine Gun Pintle (Old Timer Garage)
This is as authentic as it gets.
001.882
Machine Gun Cradle
End that Fits into the D= 30 mm
MG Mount
7
M-72, K-750, MB-750 DP-28 Pintle for NATO-Style Mount(Old Timer Garage)
The pintle transitions between the MG mount (receiver)and the MG cradle or clamp.
001.882
9
Machine Gun Adapters or Cradles
You need a cradle or adapter to connect to the pintle.
002.769
(www.oldtimergarage.eu) 001.359(www.oldtimergarage.eu)
W-1030(www.oldtimergarage.eu)
Swivel Shoe for MG-42 Swivel Shoe for MG-42
13
German MG-34 Vehicle Mount (International Military Antiques)
These are simple motorcycle mounts used with the MG-34 Light Machine Gun (LMG). They are constructed of heavy
grade steel stepped-post for insertion into the vehicle and are locked in place by a cross bolt. The top of the
mount has a flexible "Y" attachment head to connect to the weapon in place of the bipod. Very simple, but very effective.
XG3407
14
Machine Gun Pintle for 30mm ID Receivers and Silver Goose
NATO-Style Receivers (Silver Goose: The Eastern Block)
Silver Goose’s pintle is heavy 3/16” steel with solid brass pivot block and aluminum barrel block.The lever and pivot assembly are stainless steel and it has solid bronze block
fittings. The split barrel block is custom bored to the customer’s specifications. It is supplied with a split
nylon bushing to protect the finish of the barrel and has a tension adjustment to insure a tight fit.
P-1
15
Machine Gun Pintle & Base for Browning Model 1919(Silver Goose: The Eastern Block)
The pintle and base surface-mount on the top of the sidecar. Silver Goose custom fits the pintle to the weapon. They also adapt these to German style (Nürnberg) crossbar mounts.
P-1B
16
Machine Gun Pintles (Silver Goose: The Eastern Block)
Silver Goose custom-crafts each machine gun pintle by hand, whether mounting an AK-47 air-soft or a
fully-automatic DP-28.17
Comparative Pricing of Machine Gun PintlesItem Supplier Internet Address (www.) Fits Part # Approx 2010
Price (USD)
Adapter Old Timer Garage oldtimergarage.szn.pl Swivel Shoe 002.769 $130
Swivel Shoe Old Timer Garage oldtimergarage.szn.pl Swivel Shoe for MG-42 001.359 $97
Swivel Shoe Edelweiss Militaria edelweissmilitaria.com/ Swivel Shoe for MG-42 W-1030 $175
MG Pintle Silver Goose: The Eastern Block
silvergoosestore.biz/mg.htm
30mm I.D. Ural/Dnepr Receivers and Silver Goose NATO-style Receivers
P-1 $121
MG Pintle Ersatzteile und Zubehör ural.de/news.shtml - Militaria $160
MG Pintle& Base
Silver Goose: The Eastern Block
silvergoosestore.biz/mg.htm
BROWNING MODEL 1919 MG P-1B $150
Vehicle Mount International Military Antiques ima-usa.com/index.php German MG-34 XG3407 $95
DP-28 Pinle Old Timer Garage oldtimergarage.szn.pl DP-28, D= 30 mm M-72, K-750, MB-750, Ural, Dnepr
001.882 $132
MG mount clamp
Old Timer Garage oldtimergarage.szn.pl M-72, K-750W, MB-750/650 001.358 $47
MG Vertical Support
Blitzbikes blitzbikes.com $42
MG Swivel Blitzbikes blitzbikes.com $125
MG-34 adapter Moto World changjiang750sidecar.com
MG-34 adapter 01-0013 $50
MG Vertical Support
MG Swivel
Blitzbikes
This study traces the evolution of the in the Russian motorcycle. We see automation. 18
German MG42 Mount, Long Shaft
Long Shaft (L = 540 mm)
Item: 004.643*]
List Price: 120.00€
(www.oldtimergarage.eu)23
MG Mount (Pintle)Great Condition, No Damage
List Price: $130
(www.russianiron.com)
24