2
Please contact NeoMagic Sales for complete information. MiMagic 8 Applications Processor Copyright © 2008 NeoMagic Corporation. All rights reserved. NeoMagic Corporation 3250 Jay Street Santa Clara, CA 95054 Tel: 408.988.7020 Fax: 408.988.7036 NEOMAGIC Choose from Many Multimedia Features for Your Handheld Device • Digital Mobile TV - Enable mobile TV for all major standards, including ISDB-T, T-DMB, CMMB, and DVB-H. • DRM Support in Hardware • VoIP - Design dual mode handsets with low-cost VoIP option. • Up to 16 Mega-pixel Digital Still Camera - High-quality image capture with many enhancements. • TV Output Support - Enable video and still image viewing on home TV screen. - External encoder required The MiMagic 8 is an ARM9-based applications processor designed to deliver high-performance multimedia for mobile handsets and other handheld products. The MiMagic 8 enables numerous multimedia features, including mobile TV, audio, video, still camera, VoIP and GPS. With this processor NeoMagic also delivers software and APIs to help reduce design cycle time. The MiMagic 8 uses an enhanced multimedia engine based on NeoMagic’s patented Associative Processing Array (APA) technology. This multimedia engine uses dual processing arrays to deliver the high performance required for the multimedia applications in today’s handheld products, at very low power. This allows the user to enjoy hours of music listening, mobile-TV viewing or, video recording and playback. Dual Massively-parallel APA High Performance Multimedia Engine • Array size: 512 x 160 cells each • Low power operation Baseband Interface • 16-bit Host Bus Interface support • On-chip memory for high-speed data transfer Mobile SDRAM Support • Up to 128MB 32-bit 1.8V SDRAM Display System • Supports screen sizes up to 800x600 • Hardware acceleration (crop, color space conversion, linear scaling) • Dual image overlay windows • Color depth support: 8, 16, 24 bpp TFT Hardware Digital Rights Management (DRM) • Security engines supported include 3-DES, AES, C2, ECC, Multi 2, RC4, RSA, SHA-1 • One-time-programmable (OTP) memory for digital ID Media Storage Support • Flash support for bulk storage • SD Card/SDIO/MMC/CE-ATA removable storage Camera/Video Input Engine • Supports CMOS and CCD sensors • High speed CCIR 656/601-5, Bayer-8, or Bayer-10 camera input Audio Subsystem • I2S, ACLink/AIL interfaces DMA-Backed Input/Output • 4 UARTs, 2 with flow control • Two SPI ports, one I2C port • GPIO Power Saving Features • Dynamic clock gating • Multiple power planes • Frequency & voltage scaling MiMagic 8 Features GPIOs Flash Bulk Storage (Optional) SDRAM 16-bit Host Bus Inter face Camera SD Card ( Optional) LCD Panel MiMagic 8 Digital Mobile TV • VoIP • Still Camera Audio/Video Player • Video Camcorder GPS • 3D Gaming Camera/Video Input Engine Scale Bayer/YUV Convert Crop Display Subsystem BitBLIT Linear Scale SDRAM Inter face Baseband Interface Camera Module LCD Display MiMagic 8 SDRAM Baseband System Multimedia Engine Associative Processing Array APA Control SDIO MMC Timer GPIO ACLink I2S I2C UART w/HW Flow Ctrl (2) SPI (4) ARM 926EJ 16 KB D-cache 16 KB I-cache PLL/ Clock Pwr Mgmt Boot ROM Vectored Interrupt CE-ATA RTC PWM (2) DRM OTP ROM for Secure Boot Embedded SRAM (16 KB) SMI Inter face Shared Mailbox DMA Engines MPEG-2 Sync Hardware Rotation UART (2) Dual Video Overlay Flash LCD Controller Dual • Video Camcorder / Player - Enable high quality video recording and playback. - Enable video recording in H.264 or MPEG4 formats. - Enable video download, playback, messaging. • GPS Navigation - Enable cost effective GPS navigation. - Used as host processor. • Audio Player - Enable music download and playback. • 3D Gaming - Enable exciting 3D games.
