Markus_p

Mini FPV-Rover(Tank)

VIEW IN BROWSER

updated 9. 6. 2019 | published 9. 6. 2019

14 hrs

3 pcs

f

0.10 mm0.20 mm

k

0.40 mm

h

PLAFlex

97 g

d

MK2.5S +MMU2S

PRUSAPRINTERS

Summary

This is a mini version of my FPV-Rover V2.0 https://www.thingiverse.com/thing:2952852

The dimension are 10cm x 10cm x 3cm

Videos on Youtube: https://www.youtube.com/watch?v=mjomPwlsyFQ

Hobby & Makers > RC & Robotics

tank rover remotecontrol remote rc car

Body: Print body with about 20%-25% infill and use supportmaterial

Track: Print it with 0.1mm layer height, so that you receive a smooth finish.No support needed

Cog: Print with about 25% infill and use supportmaterial

Rubbertrack: Use Ninjaflex or TPU for the rubbertracks.

Inner track frame: Print with about 25% infill. No support needed

Outer track frame: Print with about 25% infill. No support needed

Top: Print with about 20%-25% infill and use supportmaterial

Pins: Use 1,75mm filament as pins for the track

Parts to print 1x body 70x track 70x rubbertrack (only if needed) 1x top 2xinner track frame 2x outer track frame 4x cog

All Parts needed are also listed in the attached BOM

8x bearings https://www.banggood.com/Wltoys-A949-A959-A969-A979-8x12x3_5mm-Ball-Bearing-4Pcs-p-937936.html?p=OF26119123132014119R

2x Motor (with 300 rpm) https://www.banggood.com/Orlandoo-OH35P01-KIT-RC-Car-Parts-Gear-Motor-p-968516.html?p=OF26119123132014119R

2x ESC https://www.banggood.com/MicroRC-5A-Bi-Directional-Brushed-ESC-For-RC-Car-p-1056732.html?p=OF26119123132014119R

8x Screws M3 x 14mm https://www.banggood.com/340pcs-M3-A2-Stainless-Steel-Hex-Socket-Screws-Nut-Assortment-Kit-p-1109208.html?p=OF26119123132014119R

1x receiver (if you use FRSKY) https://www.banggood.com/2_4G-4CH-Mini-Frsky-D8-Compatible-Receiver-With-PWM-Output-p-1143300.html?p=OF26119123132014119R

1x FPV AIO camera https://www.banggood.com/Eachine-TX01-Super-Mini-AIO-5_8G-40CH-25MW-VTX-600TVL-14-Cmos-FPV-Transmitter-p-1088374.html?p=OF26119123132014119R

1x Rubberband to secure the fpv-camera https://www.banggood.com/600Pcs-Candy-Color-Loom-Rubber-Bands-DIY-Bracelet-Craft-With-Clips-p-937203.html?p=OF26119123132014119R

8x Magnets 4mm x 2mm https://www.banggood.com/50PCS-N52-4mmx2mm-Round-Neodymium-Magnets-Rare-Earth-Magnet-p-931787.html?p=OF26119123132014119R

1x Battery 1S 600mAh https://www.banggood.com/ZOP-Power-3_7V-600mAh-20C-Lipo-Battery-JST-Plug-p-994143.html?p=OF26119123132014119R

Print Files (.gcode) DOWNLOAD ALL FILES

6.8 MB

5.10 hrs f 0.10 mm k 0.40 mm h PLA 17.00 g d MK2.5S+ MMU2S

updated 9. 6. 2019

16.2 MB

8.21 hrs f 0.20 mm k 0.40 mm h PLA 76.00 g d MK2.5S+ MMU2S

updated 9. 6. 2019

509.3 KB

0.64 hrs f 0.20 mm k 0.40 mm h Flex 4.00 g d MK2.5S+ MMU2S

updated 9. 6. 2019

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

178.6 KBupdated 9. 6. 2019

1.1 KBupdated 9. 6. 2019

1x Drill 1,8mm https://www.banggood.com/10pcs-1_0-1_9mm-HSS-Micro-Straight-Shank-Twist-Drill-Bits-p-1163120.html?p=OF26119123132014119R

1x Drill 1,9mm https://www.banggood.com/10pcs-1_0-1_9mm-HSS-Micro-Straight-Shank-Twist-Drill-Bits-p-1163120.html?p=OF26119123132014119R

70_tracks_01mm_pla_mk25smmu2s.gcode

main_parts_02mm_pla_mk25smmu2s.gcode

rubbertrack_02mm_flex_mk25smmu2s.gcode

body.stl

rubbertrack.stl

166.8 KBupdated 9. 6. 2019

106.7 KBupdated 9. 6. 2019

78.9 KBupdated 9. 6. 2019

196.0 KBupdated 9. 6. 2019

138.2 KBupdated 9. 6. 2019

Find source .stl files on Thingiverse.com

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—Share Alike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

track.stl

inner_track_frame.stl

top.stl

cog.stl

outer_track_frame.stl