Mini Lathe Rifles

Mini Mauser 17 Rem. By Les Brooks

Barrel fitted using a 7X10 HF and chambered in 4 screw chuck

Martini converted to center fire 20 cal . Spec.

Used a 7X12 mini lathe

7X57 98 Mexican Mauser

7X12 mini lathe

These rifles were made using the Chinese mini lathes.

This is the latest rifle a 204 Ruger built as a project for the

Accuratereloading.com forum

This is the 98 Mexican Mauser made for myself shown in this write up.

Mini lathe project making an engraver sharpening tool for basic engraving

Mauser Mark X rebarreled on 7X12 mini lathe