W15Miniature photoelectric sensors
Flexibility and Versatility – The right sensor for all applications
Industrial design. SICK technology.
Application solutions. The W15 series
photoelectric sensors have it all!
The WTB15 offers best-in-class back-
ground suppression performance,
utilizing SICK’s latest custom ASIC:
OES3. This will provide users with pre-
cise adjustable background suppres-
sion – reliable detection of target
objects, regardless of colour or refl ec-
tivity. Benefi ts also include industry-
leading protection to common facto-
ry “noise” infl uences: EMC, sensor
cross-talk, ambient lighting, etc.
In addition, the W15 series is round-
ed out with a full offering of other
sensing modes: WTE15 energetic
sensors, WL15 retrorefl ective sen-
sors, and WSE15 through-beam sen-
sors.
Mounting fl exibility is prominent in the
design of the W15 series. In addition
to the 18 mm front mount and side-
mount through holes, the W15 offers
a unique fl ush-mounting option with
the included “snap-ring.” Sensors no
longer need to intrude on the prod-
uct fl ow.
Flexible output confi gurations are also
included in the W15 series. Sensors
are offered with either PNP/NPN (bi-
polar) outputs, or with complementa-
ry outputs. This allows for the optimi-
zation of sensor performance, as well
as inventory streamlining.
Another illuminating advantage of
the W15 series is the highly visible
LED indicators. In addition to the typi-
cal power and output indicator on the
top of the sensor, these indicators are
duplicated on the back of the sensor.
The back cover of the W15 glows in
green and yellow to indicate the sen-
sor’s status.
D ATA S H E E T
2 S I C K 2 0 0 9 - 0 4 - 2 1
W15 at a glance
Pin-point LED Provides an extremely sharp
light spot. Alignment is very
simple. Switching is precise
and consistent.
Best in class background suppressionSICK‘s outstanding technology based on dual
sender LEDs and custom-designed ASICs
(OES3). High immunity against ambient light
and passive interference (sensor cross-talk,
EMC, etc.)
Close-up of actual light spot of WTB15.
Highly visible LED indicators In addition to the indicator on the top of the
sensor, indicators are duplicated on the back
of the sensor, both power and output.
2 0 0 9 - 0 4 - 2 1 S I C K 3
WTB15 – Photoelectric
proximity sensor with
background suppression
Detection of objects, irrespective of
colour and consistency, up to the
predefined scanning distance
� Best background suppression
� Clearly visible light spot
WSE15 – Through-beam
photoelectric sensors
Fast and reliable alignment of the
sensors through brilliant light spot.
WL15 – Photoelectric
reflex sensors
Quick and easy alignment using the
clearly visible light spot. Adjustable off-
delay 0 ... 2 sec
WTE15 – Photoelectric
energy sensors
Extended scanning range due
to infrared light sender
Flexible mountingInnovative fl ush mount with snap-ring
allows the sensor to be close to the
process without interfering, and saves
mounting time.
Easy adjustmentof scanning
distance and off-
delay by potenti-
ometer
4 S I C K 2 0 0 9 - 0 4 - 2 1
WTB15 DC Photoelectric proximity sensors
Precise adjustable
background suppression
Highly visible indicator
LEDs, including illuminated
back cover
Flexible output configu -
ration – PNP/NPN or
complementary
Innovative snap-ring for
flush mounting
Photoelectric proximity sensors
Dimensional drawing
Optical axis, receiver
Optical axis, sender
Mounting hole Ø 0.08 in (3.2 mm)
Plug M12, 4-pin
Potentiometer
LED indicator green = power, yellow = output
1
2
3
4
5
Connection types
1L+
Q
Q
4
2
M3
brn
blk
wht
blu
Plug
M12, 4-pin
4
2
3
31.916.2
M1
8 x
1
48
.5
21.3
6.5
18.2
9.6
Ø 3.2 8
38
24
.1
1
6
6
5
WTB15-N2431
WTB15-P2431
®
6
Scanning distance0.2 … 7.9 in4 ... 200 mm
Dimensions in mm
WTB15-N1131
WTB15-P1131
WTB15-A2431
WTB15-B2431
WTB15-A1131
WTB15-B1131
Cable
4 x 0.14 mm2
1L+
QPNP
QNPN
4
2
M3
brn
blk
wht
blu
Plug
M12, 4-pin
L+
M
QPNP
QNPN
brn
blk
wht
blu
Cable
4 x 0.14 mm2
L+
M
Q
Q
brn
blk
wht
blu
2 0 0 9 - 0 4 - 2 1 S I C K 5
25
5
10
15
20
0(mm) 25 50 75 100 125 150 175 200
% o
f sc
annin
g d
ista
nce
1
3
2
6%/90%
18%/90%
90%/90%
W15
Technical data WTB15- A2431 B2431 N2431 P2431 A1131 B1131 N1131 P1131
Scanning distance Order information
Scanning distance typ. max. 0.2 … 7.9 in (4 ... 200 mm)
Operating distance 0.6 … 7.9 in (15 ... 200 mm)
Adjustment of operating distance Potentiometer, 5 revolutions
Light source, light type Pin-point LED, red light, 650 nm1)
Light spot diameter 0.3 in at 2.0 in (7 mm at 50 mm)
Supply voltage VS 10 ... 30 V DC2)
Residual ripple < 5 VPP
3)
Power consumption ≤ 30 mA4)
Switching outputs PNP
NPN
Switching mode Dark-switching
Light-switching
Output current Iamax ≤ 100 mA
Response time < 0.5 ms5)
Switching frequency 1,000 Hz6)
Connection type Plug, M12, 4-pin
Cable 7) PUR, 2 m
VDE protection class8)
Circuit protection9) A, C, D
Enclosure rating IP 67
Ambient temperature Operation –40 ... 140 °F (–40 ... 60 °C)
Storage –40 ... 167 °F (–40 ... 75 °C)
Weight With plug Approx. 0.4 oz (10 g)
With cable 2 m Approx. 2.2 oz (60 g)
Material Housing: ABS
Optic: PMMA
Included with delivery Snap-ring, M18 nut
1) Average service life 100,000 h
at Ta = +25 °C
2) Limit values, reverse-polarity protected
operation in short-circuit protected
network, max. 8 A
3) May not exceed or fall short of
VS tolerances
4) Without load
5) Signal transit time with resistive load6) With light/dark ratio 1:17) Do not bend below 0 °C8) Reference voltage 50 V DC
9) A = VS connections reverse-polarity
protected
C = Interference pulse suppression
D = Output Q and Q–
short-circuit
protected
25 50 75 100 125 150 175 200
1
0 (mm)
■ Operating distance ■ Typ. max. scanning distance
2
3
1
2
3
Scanning range on black, 6 % remission
Scanning range on grey, 18 % remission
Scanning range on white, 90 % remission
20 1255
20 1755
20 2005
Type
WTB15-A2431
WTB15-B2431
WTB15-N2431
WTB15-P2431
WTB15-A1131
WTB15-B1131
WTB15-N1131
WTB15-P1131
Order no.
1043325
1043326
1044306
1044305
1046281
1046282
1046283
1046284
6 S I C K 2 0 0 9 - 0 4 - 2 1
WTE15 DC Photoelectric proximity sensors
Adjustable sensitivity
with long range
Highly visible indicator
LEDs, including illuminated
back cover
Flexible output configu -
ration – PNP/NPN or
complementary
Innovative snap-ring for
flush mounting
Scanning distance0.4 … 13.8 in 10 ... 350 mm
Photoelectric proximity sensors
Dimensional drawing
WTE15-N2411
Connection types
L+
M
Q
Q
brn
blk
wht
blu
Cable
4 x 0.14 mm2
WTE15-P2411
Plug
M12, 4-pin
1L+
Q
Q
4
2
M3
brn
blk
wht
blu
WTE15-N1111
WTE15-P1111
Optical axis, receiver
Optical axis, sender
Mounting hole Ø 0.08 in (3.2 mm)
Plug M12, 4-pin
Potentiometer
LED indicator green = power, yellow = output
1
2
3
4
5
4
2
3
31.916.2
M1
8 x
1
48
.5
21.3
6.5
18.2
9.6
Ø 3.2 8
38
24
.1
1
6
6
5
®
6
Dimensions in mm
WTE15-A2411
WTE15-B2411
WTE15-A1111
WTE15-B1111
1L+
QPNP
QNPN
4
2
M3
brn
blk
wht
blu
Plug
M12, 4-pin
L+
M
QPNP
QNPN
brn
blk
wht
blu
Cable
4 x 0.14 mm2
2 0 0 9 - 0 4 - 2 1 S I C K 7
50
10
1100 200 300 400(mm)
Operatingdistance
Opera
ting r
ese
rve
Scanning distance typ. max.
1
2
W15
Technical data WTE15- N2411 P2411 A2411 B2411 N1111 P1111 A1111 B1111
Scanning distance Order information
Scanning distance, typ. max. 1) 0.4 … 13.8 in (10 ... 350 mm)
Operating distance 1) 0.4 … 9.84 in (10 ... 250 mm)
Light spot diameter Approx. 2.0 in at 13.8 in
(approx. 50 mm at 350 mm)
Angle of dispersion sender Approx. 4.5°
Light source 2), light type LED infrared, 950 nm
Sensitivity adjustable Potentiometer, 5 revolutions
Supply voltage VS 10 ... 30 V DC 3)
Residual ripple 4) ≤ 5 VPP
Current consumption 5) ≤ 30 mA
Switching outputs 6) PNP
NPN
Switching mode Light-switching
Dark-switching
Output current IA max. ≤ 100 mA
Response time 7) ≤ 1.25 ms
Switching frequency max. 8) 400/s
Connection type Plug M12
Cable 9) PUR, 2 m
VDE protection class 10)
Enclosure rating IP 67
Circuit protection 11) A, C, D
Ambient temperature Operation –13 ... 131 °F (–25 ... 55 °C)
Storage –13 ... 158 °F (–25 ... 70 °C)
Weight With plug Approx. 0.4 oz (10 g)
With cable 2 m Approx. 2.2 oz (60 g)
Housing material Housing: ABS
Optic: PMMA
Included with delivery Snap-ring, M18 nut
1) Object with 90 % remission (based on
standard white DIN 5033);
100 x 100 mm2) Average service life 100,000 h
at TA = +25 °C
3) Limit values, reverse-polarity protected
operation in short-circuit protected net-
work, max. 8 A4) May not exceed or fall short of
VS tolerances
5) Without load
6) Health output (inverted alarm)
is available 7) Signal transit time with resistive load 8) With light/dark ratio 1:1 9) Do not bend below 0 °C10) Reference voltage 50 V DC
11) A = VS connections reverse-polarity
protected
C = Interference pulse suppression
D = Outputs overcurrent and short-circuit
protected
0 (mm) 100 200 300 400
■ Operating distance ■ Typ. max. scanning distance
1
2
14010 110
35010 250
2
1
Scanning range on white, 90 % remission
Scanning range on grey, 18 % remission
Type
WTE15-N2411
WTE15-P2411
WTE15-A2411
WTE15-B2411
WTE15-N1111
WTE15-P1111
WTE15-A1111
WTE15-B1111
Order no.
1043313
1043314
1043316
1043317
1046147
1046148
1046277
1046278
8 S I C K 2 0 0 9 - 0 4 - 2 1
WL15 DC Photoelectric reflex sensors
Highly visible indicator
LEDs, including illuminated
back cover
Flexible output configu -
ration – PNP/NPN or
complementary
Innovative snap-ring for
flush mounting
Scanning range0.1 … 16.4 ft0.035 ... 5 m
Photoelectric reflex sensors
Dimensional drawing
Optical axis, receiver
Optical axis, sender
Mounting hole Ø 0.08 in (3.2 mm)
Plug M12, 4-pin
LED indicator green = power, yellow = output
1
2
3
4
5
4
2
3
31.916.2
M1
8 x
1
48
.5
21.3
6.5
18.2
Ø 3.2 8
38
24
.1
1
5
5
®
Dimensions in mm
WL15-N2430
Connection types
L+
M
Q
Q
brn
blk
wht
blu
Cable
4 x 0.14 mm2
WL15-P2430
Plug
M12, 4-pin
1L+
Q
Q
4
2
M3
brn
blk
wht
blu
WL15-N1130
WL15-P1130
WL15-A2430
WL15-B2430
WL15-A1130
WL15-B1130
1L+
QPNP
QNPN
4
2
M3
brn
blk
wht
blu
Plug
M12, 4-pin
L+
M
QPNP
QNPN
brn
blk
wht
blu
Cable
4 x 0.14 mm2
2 0 0 9 - 0 4 - 2 1 S I C K 9
50
10
121 3 54 6(m)
Operatingdistance
Opera
ting r
ese
rve
1
2
4
6
Scanning distance typ. max.
W15
Technical data WL15- N2430 P2430 A2430 B2430 N1130 P1130 A1130 B1130
Scanning range and operating reserve Order information
Scanning distance, typ. max./reflect. 0.1 … 16.4 ft (0.035 ... 5.0 m) (PL80A)
Operating distance 0.1 … 11.5 ft (0.035 ... 3.5 m) (PL80A)
Light spot diameter Approx. 5.5 in at 11.5 ft (140 mm at 3.5 m)
Angle of dispersion sender Approx. 1.5°
Light source 1), light type LED, red light, with polarization filter, 650 nm
Supply voltage VS 10 ... 30 V DC 2)
Residual ripple 3) ≤ 5 VPP
Current consumption 4) ≤ 30 mA
Switching outputs 5) PNP
NPN
Switching mode Light-switching
Dark-switching
Output current IA max. ≤ 100 mA
Response time 6) ≤ 1.25 ms
Switching frequency max. 7) 400/s
Connection type Plug M12, 4-pin
Cable 8) PUR, 2 m
VDE protection class 9)
Enclosure rating IP 67
Circuit protection 10) A, C, D
Ambient temperature Operation –13 ... 131 °F (–25 ... 55 °C)
Storage –13 ... 158 °F (–25 ... 70 °C)
Weight With plug Approx. 0.4 oz (10 g)
With cable 2 m Approx. 2.2 oz (60 g)
Housing material Housing: ABS
Optic: PMMA
Included with delivery Snap-ring, M18 nut
1) Average service life 100,000 h
at TA = +25 °C
2) Limit values, reverse-polarity protected
operation in short-circuit protected net-
work, max. 8 A
3) May not exceed or fall short of
VS tolerances
4) Without load5) Health output (inverted alarm)
is available
6) Signal transit time with resistive load7) With light/dark ratio 1:18) Do not bend below 0 °C9) Reference voltage 50 V DC
10) A = VS connections reverse-polarity protected
C = Interference pulse suppression
D = Outputs overcurrent and short-
circuit protected
0 (m) 2 4 6
■ Operating range ■ Scanning range typ. max.
3
P250
4
C110A/P975
5
PL50A/PL40A
6
PL30A/PL31A
7
PL20A
Reflective tape
REF-Plus
50 mm x 50 mm
2
PL80A 1
Reflector type
0.035 ... 2.2 m
0.035 ... 2.0 m
0.035 ... 1.4 m
0.035 ... 1.2 m
0.035 ... 1.1 m
0.40 ... 0.7 m
0.035 ... 3.5 m
Operating range
1
2
3
4
5
6
7
5
3.4
2.4
2.2
1.8
2.6
0.035 3.5
0.035 2.2
0.035 1.4
0.035 1.2
0.035 1.1
0.40 0.7/0.8
0.035 2
Type
WL15-N2430
WL15-P2430
WL15-A2430
WL15-B2430
WL15-N1130
WL15-P1130
WL15-A1130
WL15-B1130
Order no.
1043320
1043321
1043323
1043324
1044304
1044303
1046279
1046280
1 0 S I C K 2 0 0 9 - 0 4 - 2 1
WL15 DC Photoelectric reflex sensors, time delay
Highly visible indicator
LEDs, including illuminated
back cover
Flexible output configu -
ration – PNP/NPN or
complementary
Innovative snap-ring for
flush mounting
Adjustable off-delay timer
Scanning range0.1 … 16.4 ft0.035 ... 5 m
Photoelectric reflex sensors
Dimensional drawing
Optical axis, receiver
Optical axis, sender
Mounting hole Ø 0.08 in (3.2 mm)
Plug M12, 4-pin
Potentiometer, time delay
LED indicator green = power, yellow = output
1
2
3
4
5
4
2
3
31.916.2
M1
8 x
1
48
.5
21.3
6.5
18.2
9.6
Ø 3.2 8
38
24
.1
1
6
6
5
®
6
Dimensions in mm
WL15-E2433
Connection types
L+
M
Q
Q
brn
blk
wht
blu
Cable
4 x 0.14 mm2
WL15-F2433
Plug
M12, 4-pin
1L+
Q
Q
4
2
M3
brn
blk
wht
blu
WL15-E1133
WL15-F1133
2 0 0 9 - 0 4 - 2 1 S I C K 1 1
50
10
121 3 54 6(m)
Operatingdistance
Opera
ting r
ese
rve
1
2
4
6
Scanning distance typ. max.
W15
Technical data WL15- E2433 F2433 E1133 F1133
Scanning range and operating reserve Order information
Scanning distance, typ. max./reflect. 0.1 … 16.4 ft (0.035 ... 5.0 m) (PL80A)
Operating distance 0.1 … 11.5 ft (0.035 ... 3.5 m) (PL80A)
Light spot diameter Approx. 5.5 in at 11.5 ft (140 mm at 3.5 m)
Angle of dispersion sender Approx. 1.5°
Light source 1), light type LED, red light, with polarization filter, 650 nm
Supply voltage VS 10 ... 30 V DC 2)
Residual ripple 3) ≤ 5 VPP
Current consumption 4) ≤ 30 mA
Switching outputs PNP
NPN
Switching mode Light-switching
Dark-switching
Output current IA max. ≤ 100 mA
Response time 5) ≤ 1.25 ms
Switching frequency max. 6) 400/s
Time delay Adjustable off-delay, 0 … 2 sec.
Connection type Plug M12, 4-pin
Cable 7) PUR, 2 m
VDE protection class 8)
Enclosure rating IP 67
Circuit protection 9) A, C, D
Ambient temperature Operation –13 ... 131 °F (–25 ... 55 °C)
Storage –13 ... 158 °F (–25 ... 70 °C)
Weight With plug Approx. 0.4 oz (10 g)
With cable 2 m Approx. 2.2 oz (60 g)
Housing material Housing: ABS
Optic: PMMA
Included with delivery Snap-ring, M18 nut
1) Average service life 100,000 h
at TA = +25 °C
2) Limit values, reverse-polarity protected
operation in short-circuit protected net-
work, max. 8 A
3) May not exceed or fall short of
VS tolerances
4) Without load5) Signal transit time with resistive load
6) With light/dark ratio 1:17) Do not bend below 0 °C8) Reference voltage 50 V DC
9) A = VS connections reverse-polarity protected
C = Interference pulse suppression
D = Outputs overcurrent and short-
circuit protected
0 (m) 2 4 6
■ Operating range ■ Scanning range typ. max.
3
P250
4
C110A/P975
5
PL50A/PL40A
6
PL30A/PL31A
7
PL20A
Reflective tape
REF-Plus
50 mm x 50 mm
2
PL80A 1
Reflector type
0.035 ... 2.2 m
0.035 ... 2.0 m
0.035 ... 1.4 m
0.035 ... 1.2 m
0.035 ... 1.1 m
0.40 ... 0.7 m
0.035 ... 3.5 m
Operating range
1
2
3
4
5
6
7
5
3.4
2.4
2.2
1.8
2.6
0.035 3.5
0.035 2.2
0.035 1.4
0.035 1.2
0.035 1.1
0.40 0.7/0.8
0.035 2
Type
WL15-E2433
WL15-F2433
WL15-E1133
WL15-F1133
Order no.
1043318
1043319
1046149
1046150
1 2 S I C K 2 0 0 9 - 0 4 - 2 1
WSE15 DC Through-beam photoelectric sensors
Highly visible indicator
LEDs, including illuminated
back cover
Innovative snap-ring for
flush mounting
Scanning range0 … 16.4 ft0 ... 5 m
Through-beam photoelectric sensors
Dimensional drawing
WSE15-B2430
Connection types
Plug
M12, 4-pin
1L+
M3
brn
blu
WSE15-A2430
Optical axis, sender
Optical axis, receiver
Mounting hole Ø 0.08 in (3.2 mm)
Plug M12, 4-pin
LED indicator green = power, yellow = output
1
2
3
4
5
® Sender
Plug
M12, 4-pin
1L+
QPNP
QNPN
4
2
M3
brn
blk
wht
blu
Receiver
Dimensions in mm
WSE15-B1130
Cable
4 x 0.14 mm2
brn
blu
L+
M
WSE15-A1130
Cable
4 x 0.14 mm2
L+
M
QPNP
QNPN
brn
blk
wht
blu
4
2
3
31.916.2
M1
8 x
1
48
.5
21.3
6.5
18.2
Ø 3.2 8
38
24
.1
1
5
5
2 0 0 9 - 0 4 - 2 1 S I C K 1 3
Opera
ting r
ese
rve
1000
100
10
1
2
3 4 521 6(m)
Operatingdistance
Scanning distance typ. max.
W15
Technical data WSE15- A2430 B2430 A1130 B1130
Scanning range and operating reserve Order information
Scanning range, typ. max. 0 … 16.4 ft (0 ... 5.0 m)
Scanning range 0 … 12.5 ft (0 ... 3.8 m)
Light spot diameter Approx. 6.3 in at 13.1 ft (160 mm at 4.0 m)
Angle of dispersion sender Approx. 1.5°
Light source 1), light type LED, red light, 650 nm
Supply voltage VS 10 ... 30 V DC 2)
Residual ripple 3) ≤ 5 VPP
Current consumption 4) ≤ 30 mA
Switching outputs PNP
NPN
Switching mode Light-switching
Dark-switching
Output current IA max. ≤ 100 mA
Response time 5) ≤ 1.4 ms
Switching frequency max. 6) 350/s
Connection type Plug M12, 4-pin
Cable 7) PUR, 2 m
VDE protection class 8)
Enclosure rating IP 67
Circuit protection 9) A, C, D
Ambient temperature Operation –13 ... 131 °F (–25 ... 55 °C)
Storage –13 ... 158 °F (–25 ... 70 °C)
Weight With plug Approx. 0.4 oz (10 g)
With cable 2 m Approx. 2.2 oz (60 g)
Housing material Housing: ABS
Optic: PMMA
Included with delivery Snap-ring, M18 nut
1) Average service life 100,000 h
at TA = +25 °C
2) Limit values, reverse-polarity protected
operation in short-circuit protected net-
work, max. 8 A
3) May not exceed or fall short of
VS tolerances
4) Without load5) Signal transit time with resistive load
6) With light/dark ratio 1:17) Do not bend below 0 °C8) Reference voltage 50 V DC
9) A = VS connections reverse-polarity protected
C = Interference pulse suppression
D = Outputs overcurrent and short-
circuit protected
5
0 (m) 1 2 3 4 5 6
■ Operating range ■ Scanning range typ. max.
0 3.8
Type
WSE15-A2430
WSE15-B2430
WSE15-A1130
WSE15-B1130
Order no.
1043327
1043328
1046285
1046286
1 4 S I C K 2 0 0 9 - 0 4 - 2 1
Connectors and mounting systems
Dimensional drawings and order information
SENSICK screw-in system M12, 4-pin, enclosure rating IP 67
Female connector M12, 4-pin, straight
Cable diameter 5/6 mm, 4/5 x 0.25 mm2, sheath PVC
Order no.
6009382
6009866
6010543
6010753
Type
DOL-1204-G02M
DOL-1204-G05M
DOL-1204-G10M
DOL-1204-G15M
Contacts
4
4
4
4
Cable length
6.56 ft (2 m)
16.40 ft (5 m)
32.81 ft (10 m)
49.21 ft (15 m)
1.5
M1
2x1
14
.5
42 Rmin1)
1/brn
2/wht 3/blu
4/blk
5/gra
Female connector M12, 4-pin, right angle
Cable diameter 5/6 mm, 4/5 x 0.25 mm2, sheath PVC
Order no.
6009383
6009867
6010541
Type
DOL-1204-W02M
DOL-1204-W05M
DOL-1204-W10M
Contacts
4
4
4
Cable length
6.56 ft (2 m)
16.40 ft (5 m)
32.81 ft (10 m)
38.3
14
.5
4/blk
1/brn
3/blu
2/wht5/gra
Mounting systems
37
36
.51
6
14
18
.2
20
15
°1
5°
1.5
306
42
4.37
0.5
16
40
14
30
°
1.5
30
18.2
42
4.3
Mounting bracket
Type
BEF-WN-M18
Order no.
5308446
Mounting bracket
Type
BEF-WG-M18
Order no.
5321870
1) Minimum bend radius in dynamic use Rmin
= 20 x cable diameter
40
45
321610.9(0.9 [.036])
12.05
15
16
15
Mounting bracket for W15
Type
MB-W1000
Order no.
7023800
38
406
17
16
Ø 10.5
M18
M4
11
23
Mounting bracket with rotary insert, for W15
Type
MB-BS18MM-M4
Order no.
2049694
M12x1
26
.51
.5
Rmin1)
2 0 0 9 - 0 4 - 2 1 S I C K 1 5
Accessories
Dimensional drawings and order information
Reflectors, plastic design for temperatures up to 149 °F (65 °C)
Reflector 0.79 x 1.57 in (20 x 40 mm), screwable
Order no.
1012719
Type
PL20A
15
18
38
ø8
ø4
.6
50
60
4.2
7.3
Reflector 1.18 x 1.97 in (30 x 50 mm), screwable
Order no.
1002314
Type
PL30A
4.1
9.1
7.2
27.8
71
56
82
29.8
Reflector 1.57 x 2.36 in (40 x 60 mm), screwable
Order no.
1012720
Type
PL40A
34
38 7.840.2
ø4
56
.6
59
.8
52
Reflector 3.15 x 3.15 in (80 x 80 mm), screwable
Order no.
1003865
Type
PL80A
84
68
71
84
4.5
8
8.5
2.5
Reflector Ø 3.31 in (84 mm), centre hole mounting
ø84 7.4
M4
Reflective tape, self-adhesive
Order no.
5319929
5319981
Type
REF-PLUS-R25
REF-PLUS-R50
Reflective tape
Order no.
4019634
5320565
Type
REF-DG-K
REF-DG
Cut to size
Sheet 29.5 x 36 in (749 x 914 mm)
Roll 1 in x 74.8 ft (25 mm x 22.8 m)
Roll 2 in x 74.8 ft (50 mm x 22.8 m)
Type
C110A
P975
Order no.
5304549
7020558
SICK AG | Waldkirch | Germany | www.sick.com
80
13
06
4/2
00
9-0
4-2
1 ∙
GO
/F
D ∙
Pri
nte
d i
n G
erm
an
y (2
00
9-0
5)
∙ Su
bje
ct
to c
ha
nge
wit
ho
ut
no
tice
∙ Th
e s
pe
cif
ied
pro
du
ct
fea
ture
s a
nd
te
ch
nic
al
da
ta d
o n
ot
rep
rese
nt
an
y gu
ara
nte
e ∙
01
A4
4c i
nt3
3 AustraliaPhone +61 3 9497 4100
1800 33 48 02 – tollfree
E-Mail [email protected]
Belgium/LuxembourgPhone +32 (0)2 466 55 66
E-Mail [email protected]
BrasilPhone +55 11 3215-4900
E-Mail [email protected]
Ceská RepublikaPhone +420 2 57 91 18 50
E-Mail [email protected]
ChinaPhone +852-2763 6966
E-Mail [email protected]
DanmarkPhone +45 45 82 64 00
E-Mail [email protected]
DeutschlandPhone +49 211 5301-250
E-Mail [email protected]
EspañaPhone +34 93 480 31 00
E-Mail [email protected]
FrancePhone +33 1 64 62 35 00
E-Mail [email protected]
Great BritainPhone +44 (0)1727 831121
E-Mail [email protected]
IndiaPhone +91–22–4033 8333
E-Mail [email protected]
IsraelPhone +972-4-999-0590
E-Mail [email protected]
ItaliaPhone +39 02 27 43 41
E-Mail [email protected]
JapanPhone +81 (0)3 3358 1341
E-Mail [email protected]
NederlandsPhone +31 (0)30 229 25 44
E-Mail [email protected]
Norge Phone +47 67 81 50 00
E-Mail [email protected]
ÖsterreichPhone +43 (0)22 36 62 28 8-0
E-Mail [email protected]
PolskaPhone +48 22 837 40 50
E-Mail [email protected]
Republic of KoreaPhone +82-2 786 6321/4
E-Mail [email protected]
Republika SlovenijaPhone +386 (0)1-47 69 990
E-Mail [email protected]
RomâniaPhone +40 356 171 120
E-Mail [email protected]
RussiaPhone +7 495 775 05 34
E-Mail [email protected]
SchweizPhone +41 41 619 29 39
E-Mail [email protected]
SingaporePhone +65 6744 3732
E-Mail [email protected]
SuomiPhone +358-9-25 15 800
E-Mail [email protected]
SverigePhone +46 10 110 10 00
E-Mail [email protected]
TaiwanPhone +886 2 2375-6288
E-Mail [email protected]
TürkiyePhone +90 216 587 74 00
E-Mail [email protected]
United Arab EmiratesPhone +971 4 8865 878
E-Mail [email protected]
USA/Canada/MéxicoPhone +1(952) 941-6780
1 800-325-7425 – tollfree
E-Mail [email protected]
More representatives and agencies
in all major industrial nations at
www.sick.com