v13.02
Mission Critical Experts
Critical Power Resource solves problems related to...
Power Quality... making sure the power to your equipment is reliable
and clean preventing equipment damage.
Power Distribution... getting clean, reliable power to the equipment
that needs it.
Power Monitoring... real-time monitoring of all power usage to
measure consumption, determine PUE and identify places to save on
energy.
Facility Documentation... capture and protect your facility institutional
knowledge and be able to access any time and any where it’s needed.
v13.02
v13.02
GE delivers superior performance and industry-leading energy efficiency for backup power management to ensure mission critical equipment and processes are protected and uninterrupted by power system anomalies.
Power Quality
GE Digital Energy
Ensuring uptime for critical processes
v13.02
GE VH Series 120V / 700VA to 3000VA / Single Phase UPS
∙ Double conversion technology, hardened design, peak load handling and wide temperature operating range
∙ 700VA, 1000VA, 1500VA and 2000VA available in June 2012; 3000VA available in Q3 or Q4
∙ Superior battery management provides 60% longer battery life than competitors
∙ High peak load handling and laser printer mode for non-standard applications (e.g. motors)
∙ Failsafe bypass for maximum reliability
∙ Hot swappable batteries for fully secure and fast battery replacement without dropping the load
∙ Boost/float charging for fast recharge (<2hours to 90%)
∙ Three year warranty including battery
Combined rack/tower design 0.9 output power factor Compact 2U design External battery packs for increased autonomy
Quiet operation, <45dBA SNMP card, relay card options 50/60Hz frequency converter without derating
v13.02
GE GT Series 120/208V / 5kVA to 10kVA / Single Phase UPS
∙ Split phase, online, double conversion, transformerless UPS
∙ Available in 5kVA, 6kVA, 8kVA and 10kVA tower and/or 19” rackmount cabinet
∙ Easily adapts to changing network configurations
∙ 120/208/220/240V
∙ Parallel for capacity or N+1 redundancy (8kVA and 10kVA only)
High efficiency >92% Maintenance bypass standard 2-year full warranty 15+ PDUs for maximum output flexibility
Extended runtime options available with 2U plug & play battery packs Additional communications SNMP card slot; built-in RS-232 communication port Hot-swappable battery and power modules
v13.02
GE LP11 & LP11 UL924 120/208/240V / 5kVA to 10kVA / Single Phase UPS
∙ Robust, high-performance UPS available in 5kVA, 6kVA, 8kVA and 10kVA
∙ Double-conversion with true online operation
∙ Parallel up to 4 units for capacity or redundancy
∙ Two year full warranty
∙ Frequency conversion without derating
∙ Also available with UL924 rating for lighting applications including 120/208/240/277V with 90 minute battery
Isolation transformer provides separately derived source for additional critical power protection ECO mode enables automatic energy savings by providing 97% efficiency
Internal automatic maintenance bypass Wide AC-input voltage and frequency capability Rugged design handles short-circuit, high overload and 5:1 crest factor loads
v13.02
GE LP33 Series 208V / 10kVA to 100kVA / Three Phase UPS
∙ A robust, high performance UPS system that provides power protection for a wide range of mission critical applications
∙ 50kVA, 60kVA, 80kVA, 100kVA, 0.90 output power factor
∙ 10kVA, 20kVA, 30kVA, 40kVA, 0.80 output power factor
∙ Parallel up to 4 units for capacity or redundancy
High input power factor (>0.98); low input THD distortion (<8%) Transformerless design for compact footprint Low input distortion and fast transient response eliminate need for oversizing the UPS ECO mode for single module configuration enables automatic energy savings by providing up to 98% efficiency
Superior battery management enhances battery lifetime Integrated internal manual maintenance bypass on 10-60kVA models Internal batteries up to 60kVA
v13.02
GE SG Series 480V / 10kVA to 750kVA / Three Phase UPS
∙ A high efficiency UPS that features a transformer-based, double conversion topology ∙ Available in 10kVA, 20kVA, 30kVA, 40kVA, 50kVA, 80kVA, 100kVA, 120kVA, 150kVA, 0.80 output power
factor ∙ Available in 225kVA, 300kVA, 400kVA, 500kVA, 750kVA, 0.90 output power factor ∙ Features ultra-high efficiency up to 99%, eBoost patented multi-mode UPS technology and power
conditioning/filtering in eBoost mode ∙ Parallel up to 6 UPS modules; redundant parallel architecture provides reliability, redundancy and
scalability
Up to 99% operating efficiency in eBoost mode Top or bottom cable access Front maintainability design reduces mean time to repair Transformer-based, double conversion topology
Slimline matching external MBP cabinet Matching maintenance bypass cabinet/transformer combo cabinet for easy configuration OSHPS seismic ratings
v13.02
GE Series MDU Model MDU-CL, Classic Design
FEATURES
Nema 1 Enclosure w/removeable front, side & rear panels.
Sidecars as needed
Door-in-door construction ; door locks
Top or bottom entry
GE Panelboards and/or GE Subfeed CBs
Intelligent Monitor – of input & outputs, with true RMS
metering
Efficiency at 98%
Modbus RTU Communications
Transient Network/Surge Suppression/ Lightning Arrestor
options
ELECTRICAL SPECS
KVA: 50, 75, 100, 125, 150, 200, 225, 300
Input: 480VAC 3ph 3w + gnd
600, 575, 480, 208VAC optional
Output: 208/120VAC 3ph 4w + gnd
600, 575, 480, 208VAC optional
Freq: 60 or 50Hz
v13.02
GE Series RDU Model MDU-CL, Classic Design
FEATURES
Nema 1 Enclosure w/removeable front, side & rear
panels. 2ft x 2ft footprint
Door-in-door construction ; door locks
Top or bottom entry
Up to (4) GE Panelboards
BCMS Basic or BCMS Plus (optional)
Analog or Digital Metering (optional)
Model DRU-WM, 9”dp wallmount version with 1 or 2
panelboards (optional)
ELECTRICAL SPECS
Voltage: 208/120VAC 3ph 4w + gnd
Mains: 1,2, or 4 ; 225 or 400Amp
GE CB or MCS use
Freq: 60 or 50Hz
v13.02
GE TR5000 Series Basic Models
Compact Economical Design
Secondary Distribution, Branch,
And Point of Use Locations
Standard Features:
• Visual Health Status Indicators
• EMI/RFI Filtering
• Relay Contacts for Remote Monitoring
• 10 AWG Wiring Leads
Optional Features:
• Flush Mount Enclosure
• NEMA 4 Fiberglass Enclosure
UL Listed – 1449 3rd Edition
Type 2 SPD
v13.02
GE TR7000 Series Standard Models (TR Series)
Full Feature Design
Service Entrance and Distribution
Locations
Standard Features:
• Visual Health Status Indicators
• Alarm LED
• Audible Alarm w/ Silence
• Alarm Test
• Surge Counter
• EMI/RFI Filtering
• Relay Contacts for Remote Monitoring
Optional Features:
• Surge Rated Disconnect
• NEMA 4X SS Enclosure
• Flush Mount Enclosure
UL Listed – 1449 3rd Edition
Type 2 SPD
v13.02
GE TR7000 Series Enhanced Thermal Protection Models (TPR Series)
Full Feature Design
Service Entrance and Distribution
Locations
Standard Features:
• Visual Health Status Indicators
• Alarm LED
• Audible Alarm w/ Silence
• Alarm Test
• Surge Counter
• EMI/RFI Filtering
• Relay Contacts for Remote Monitoring
Optional Features:
• Surge Rated Disconnect
• NEMA 4X SS Enclosure
• Flush Mount Enclosure
UL Listed – 1449 3rd Edition
Type 1 and Type 2 SPD
v13.02
GE TR7000 Series A-Series Panelboard Extension with Integral SPD
Full Feature Design
For Installation on GE A-Series Panels
Standard Features: • Visual Health Status Indicators
• Alarm LED
• Audible Alarm w/ Silence
• Alarm Test
• Surge Counter
• EMI/RFI Filtering
• Relay Contacts for Remote Monitoring
Available Types: • 9” for 65kA to 100kA
• 24” for 125kA to 300kA
• Flush or Surface Mount
• Windowed or Non-Windowed
UL Listed – 1449 3rd Edition
Classified Type 2 SPD
v13.02
GE Series DPB Distributed Power Busway, Open-Rail Busway
FEATURES
20-30% less expensive than
traditional cable/conduit installs
Finger-safe, indoor rated bus system
Multiple Rail lengths: 3, 5, 6, 10, 12,
20 feet
99% Recyclable
UL/ETL/CE/IEC approved & certified
Interchangeable Tap-Off Boxes, 160-
400 Amp
End Feed/Bus Rail Monitoring, BCM
Basic or Plus (optional)
Near-wall mounting okay, due to
straight-up Tap-Box install
Flexible configuration via use of
Elbows, Tees, & Cross units
ELECTRICAL SPECS
• Bus Ratings (Amps): 160, 225, 250,
400, 600, 800
• Voltage: 480 or 208VAC 3ph 4w, gnd
• Frequency: 60 or 50 Hz
• Short Circuit Capacity: 22-42 KAIC
• Copper bus bars
• Class H (220) insulation
v13.02
FacilityONE®, Information and Knowledge!
To Manage Your Important Assets
FacilityONE ® transforms any site (data center, retail,
office buildings, manufacturing, hospitals...) into the
ultimate, perfectly documented facility. FacilityONE's
web-based Facility Information Solution (FIS™) enables both
executive management and front line operations personnel to
document, manage, control and assess their facilities and
associated systems critical information with a simple mouse-click!
More intuitive and dramatically less expensive than traditional
solutions, FacilityONE’s SmartPrint® technology puts you in control
of every asset, helping you to maximize uptime and efficiency – plus
respond more rapidly in emergency situations.
FacilityOne
v13.02
FacilityOne
FacilityONE® combines and integrates more tools to help you manage your facility
much more cost effectively.
Some studies estimate that close to 90% of facility managers don’t have access to the
information they really need to manage their facilities. FacilityONE® is a smarter way
to manage the information that is really important.
+ + =
Work Order
Management
Condition
Assessment Blueprint
Combined & Integrated
work order management
condition assessment,
SmartPrints
v13.02
High Power, High Voltage Regulation to
Tame Your Power, Keep Your Profits
Omniverter is the world’s largest supplier of high
power sag mitigation equipment. Its product lineup of
corrective equipment (Active Voltage Conditioner, Power Flow
Controller, Frequency Converter Active) improves system reliability
by correcting events caused by voltage sags. Avoid the costs of
interruptions, idle time, scrap material and loss of profits - Omniverter
products require very little maintenance and are energy efficient.
Omniverter
v13.02
Omniverter
The most common PQ problem facing
industry is Sag events.
According to EPRI, Sags account for
92% of PQ events
Facilities do not get advance warnings
of impending Sags
;
There is a solution
v13.02
Power Quality Monitoring + Power Management +
Power Quality Solutions = $’s Saved!
The first step towards lowering energy costs
and improving operations is accurately measuring
electrical supply, usage and events. Janitza metering products offer a
unified and cost effective source for power quality monitoring, energy
metering, and power control, providing support for our client’s highest
efficiency and power reliability demands.
Janitza
v13.02
Janitza
Cost-saving potentials to be
achieved with modern power
analyzers:
Reduction of electricity costs,
3fold: kWh consumption reduction;
Reduction of reactive power cost
(improvement of poor power
factor, reduction of penalties);
Eliminating demand charges
Identify ‘energy gluttons’
Reduce maintenance costs
Extend the service life of
electronic and electric equipment
Exactly register demand per cost
center (e.g. how much electricity is
used in which office?)
Stabilize the power supply to
prevent computer downtimes
Pro-active measures by means of
a higher transparency of the
electricity distribution
v13.02
Rittal Corporation - Best in Class Racks & Cabinets
to House Your IT Assets
Rittal manufactures the world's leading industrial and IT
enclosures, racks and accessories, including high
efficiency, high density climate control and power
management systems for industrial, data center, outdoor and hybrid
applications. Rittal's off-the-shelf standard, modified standard and
custom-engineered products are known throughout the world as high
quality, affordable solutions for practically any industrial or IT
infrastructure application — from single enclosures to comprehensive
systems. Rittal is ISO 9001:2008 and ISO 14001:2004 certified.
Rittal
v13.02
Rittal
Energy – With efficient cooling units and heat exchangers
Material – Through innovative design procedures and by using alternative materials
Time – With simple assembly of the new TS IT rack and SE 8 system enclosure
Flexibility – With intelligent cross-system engineering
Enclosures Power
Distribution Climate Control
IT Infrastructure
v13.02
Cell SPY Monitor, Managing Your Battery
Systems’ Health and Maintenance
Cell SPY battery monitoring by EMSYS combines the
latest in wireless technologies and field proven battery
resistance measurements, into the world’s smallest and
most power efficient solution.
The Cell SPY Monitor gateway gathers the important
information eliminating expensive on-site reading by technicians.
Operators need not be anywhere near the batteries “hot”
connections. The Cell SPY Monitor is “invisible” to your batteries by
consuming less than 100uA during normal operations and is
designed to operate in just about any environment.
EMSYS
v13.02
EMSYS
This system has been designed to be simple to install and
even simpler to use. Monitors are installed in seconds and
most systems are operative in a matter of hours.
Cell Spy Monitoring System - Cell Spy Monitoring - Cell Spy Gateway - Cell Spy Application
v13.02
Power Management, Infrastructure Management,
KVM and serial solutions
Raritan is a proven innovator of power
management, infrastructure management, KVM and
serial solutions for data centers of all sizes. In hundreds of
corporations worldwide, their hardware and software solutions
provide facilities and IT managers with the control they need to
increase power management efficiency and improve data center
productivity.
Raritan
v13.02
Powertron Global – Bring Your Cooling Back to Its
Original Efficiency/Capacity
Powertron Global’s products can make your HVAC
equipment run 15% to 30% more efficient and
reduce your carbon footprint dramatically. The
patented PermaFrost® formulations are specifically designed to clean
the HVAC coil system from the inside and neutralize the effects of oil
fouling. PermaFrost® formulations work in a synergistic manner to
activate, lubricate, and improve thermo-conductivity without
compromising the existing components of a refrigeration system.
Powertron Global
v13.02
Case Studies: >100 | DX \ Chillers | Laboratory Test
Some of the successes:
Texas Oil Tech Laboratory
NSF Laboratory
Andrews Air Force Base
Major U.S. Communications Company
Bristol-Myers Squibb
Benedictine School
Southern Surgical Hospital
Citibank
Bemis Process
Bridgestone-Firestone
Catholic Health Initiatives
SBLM Architects
Dunkin’ Donuts
USNS Benavidez
Hilton Waldorf Astoria
Silverstein Brothers 7 World Trade Center
Morgan-Stanley
Royal Farms Convenience Stores
Central Alabama Community College
Seattle Mariners, Safeco Field
Whitney National Bank
References available on request
Powertron Global
PermaFrost NMR DX formulated for Direct Exchange equipment
PermaFrost NMR CH formulated for chiller (water cooled) equipment
PermaFrost NMR Ice formulated for Ice Production equipment
PermaFrost NMR A formulated for Ammonia equipment
v13.02
Performance Management Solutions for the
Green Data Center
Modius® is a leading provider of data center
infrastructure management solutions. Modius
OpenData® software provides real-time monitoring and decision
support that enables unified visibility and better control over the
critical systems in the data center so that you can maximize
availability, capacity, and efficiency across your entire data center
operations. Modius OpenData® is completely vendor neutral and
highly scalable with no coding required to add new devices or to
deploy across multiple sites.
Modius
v13.02
Modius
Real-time Capacity
Track consumption,
manage CapEx
One platform for a holistic view of data center performance
Automated Metrics
Baseline & manage
to targets
Unified Alarming
Complete operational
visibility & N+1
Availability Capacity Efficiency
v13.02
DataCentIR™ Infrared Thermographic Services –
“Where’s the Heat!!!”
Reduce your total energy consumption and
improve your cooling capabilities by optimizing
your CRAC and HVAC system with Infrared Thermal Mapping.
Thermal mapping can be used for commissioning new facilities,
validating CFD modeling, troubleshooting a cooling problem and
progressive monitoring in existing facilities.
DataCenterIR
v13.02
DataCenterIR
TOOLS FOR ANALYZING THE
DATA CENTER THERMAL
ENVIRONMENT
DEFINING THE PROBLEM WITH
HOT AILSE / COLD AISLE
COOLING SYSTEMS
Thermal mapping view of Data
Center Floors
Thermal mapping view of Data
Center Server Racks
THERMAL IMAGING OF THE
POWER DISTRIBUTION SYSTEMS
IN DATA CENTERS
“What we do is find and point to the broken infrastructure in America”
v13.02
Paladin® Live™ Real-Time Power Network
Management – What Happens If….???
Power Analytics (formerly EDSA) is an enterprise
software company that delivers high availability,
reliability and energy efficiency to mission critical
electrical infrastructures. The Paladin® Live™ advanced model
based analytics engine continuously compares real-time system
performance to as designed objectives, bringing unprecedented
predictability and manageability to dynamic electrical networks and
ensuring foresight as accurate as hindsight.
Power Analytics
v13.02
Modular Mission Critical Solutions –
Off Site, Pre-Built Data Center
TAS’ complete, modular data center can be installed on
your project site in 25-50% of the time it takes to field
construct an on-site data center. The TAS modular data center is
built in an ISO 9000-compliant factory, and shipped to your project
site.
TAS
v13.02
TAS
Experts in Cooling,
Packaging and Power
Revolutionizing the
Industry – Built According
to Demand at the Lowest
Cost
Guaranteed Performance
and Reliability
Industry Leading
Installation Schedule
v13.02
SF-6/Mini Substation – Save Space and Maintenance
Cost in Power Distribution
Power Systems provides a unique
combining of SF-6 switchgear and
substation transformer to create their Mini-Substation products.
Mini-subs offer tremendous advantages for space and cost in many
applications that would otherwise use the older and separate air-
break systems and freestanding substations. Sizes available up to
3,000 kVA.
PowerSystems
v13.02
PowerSystems
Compact size, only slightly larger than a
padmount transformer. The unit can house
up to 3 load break primary disconnects,
fusing, transformer, secondary metering
and distribution.
Primary load break switches offer gas filled
technology to provide maintenance-free
service for the life of the unit.
Interconnecting components between the
switch and the transformer allow the
switches to be unplugged from the
transformer in minutes.
All the primary compartments are
submersible. There are no live parts,
including the cable connections!
Available in an automatic transfer from 2
primary feeds.
Secondary can accommodate a wide
selection of breaker arrangements.
Very low EMF Emissions mean the MiniSub
can be installed anywhere.
v13.02
North America's Leader in Harmonic Mitigation
Technology – Cut the Noise!
Power Quality International (PQI) is presently the only
manufacture with a complete line of harmonic mitigating
medium and low voltage class transformers and zero-sequence
harmonic filters. In addition, PQI has acquired the exclusive rights to
apply e-Rated® technology to its entire HarMitigator™ product line.
PQI distribution transformers save energy and space.
Power Quality International
v13.02
Power Quality International
Simply stated, the PQI objectives are:
• To resolve system-load
incompatibility issues,
• To meet all current and proposed
transformer efficiency standards
under linear or any nonlinear load
condition,
• To improve distribution system and
load efficiencies,
• To meet all current power quality
standards, under linear or any
nonlinear load condition,
• To meet all of the foregoing
objectives at the lowest possible
cost, in order to create the most
attractive financial benefit.
The PQI Solution™
Power Quality & Transformer Efficiency Measurement Diagram
4700 140th Avenue N., Suite 102 - Clearwater, Florida 33762
Tel: 1-888-539-7712 - Fax: (727) 535-9923 - Web: www.powerqualityinternational.com
FILENAMEPQI - PQ & Sys. Eff. Measurement Diagram
PAGE1 OF 1
REVISEDJune 2003
15kVA
Transformer
Under Test
Secondary
Instrumentation
Primary
Instrumentation
208 V
Source
Power Quality Demonstration
200 ft.,3 Phase, 4 Wire Branch Circuit
5764VA, 3862W
0.67PF, at 120/208V
Non-Linear Load
Mini-Z
Zero-Sequence Filter
20 A
Voltage & Current Difference Loss Measurement Method Instrument
Measures Transformer Excitation Losses & Load Losses
Measurement
Access
100 ft. 100 ft.
THIS DRAWING IS THE PROPERTY OF: POWER QUALITY INTERNATIONAL, INC. IT IS LOANED, SUBJECT TO RECALL, AND
INFORMATION CONTAINED HEREIN MAY BE CHANGED WITHOUT NOTICE. MODIFICATIONS TO THIS DRAWING MUST BE
APPROVED BY PQI IN WRITING. ALL RIGHTS OF DESIGN AND INVENTION ARE RESERVED.
Efficiency Demonstration
8 ft., 3 Phase, 4 Wire Circuit
120/208V