MISSION
Knowledge and skills combined with creativity isthe focus of our performance and this is whatmakes us special, development oriented, dynamic,manufacturing and service providing corporation.We follow the mission: Flexible Organization ofResearch Development Ideas, and strive to makeour customer satisfied.
Yet another proof of enviromental awareness is theISO 14001:2004 certificate along the ISO/TS 16949and ISO 9001:2000 certificates for the highquality of our products.
VISION
Our goal is to become a recognisable OEM supplierin interior for the automotive, aviation, railwayindustry. Production with the state of art technology,distinguished by:
1. Reliability
2. Flexibility
3. Innovative solutions
4. Permanent care for environment
QUALITY SYSTEM
With perfect respect for diversity!
FORI Group is the Headquarter of companies, integrating several business systems andactivities: production, trade and engineering. Our trademarks are new business opportunities, are international operations of Fori Group known over the world in differentindustries : automotive, cable, medical, aviation, building.
FORI Group are always the people who makes the news. They make us recognizable by theirreliability, flexibility, innovation and constant concern of environment.
Is not so much what we do, but how we think.
With integration of ASSOCIATED ENTERPRISES we try to surprise the expectations of ourcustomers and reach the goal together.
Technical Textile Division consists of 4 pillars:
TECHNICAL TEXTILE DIVISION
The 1st pillar The 2nd pillar The 3rd pillar The 4th pillar
Laminating, Cutting, Sewing of materials for Interiors : Automotive, Aviation, Railway industry
Laminates for Cable industry
Laminates for
Building Construction
Insulation industry
Sorbents and Covers for Mattresses for a high quality of living people
The Production Plants:
Slovenia, Serbia
The Production Plants and
locations:
Slovenia, China, Serbia,
Russia
The Production Plants:
Slovenia
The Production Plants:
Slovenia, Serbia
Trade mark:
Trade mark:
Trademark:
Trade mark:
The 1st pillar in Technical textile division
LAMINATION TECHNOLOGIES & CUTTING & SEWING
INPUT: different materials as PU foam, nonwovens, needle punched, felts, watte,
webs, foils, knitted scrims,woven fabrics, face fabrics, vinyl, leather, 3D mesh
materials, fillers, flame retardant FAR materials, low emission and recycled
materials, acoustic and barrier materials, absorbents, membranes..
PRODUCTION PROCESSES:
Lamination:
Flame lamination
Hot Melt lamination
Dry/ Wet lamination
Web lamination
Cut parts lamination
Thermoadhesive coating
Superabsorbent lamination
Selfadhesive lamination
Cutting: material in rolls, pieces, tapes
Sewing:
Seat covers
Headrests
Armrests
Sheets
Pads
OUTPUT: bi-laminates, tri-laminates, multi-laminates in rolls, laminated cut pieces.
Final products as seat covers, headrest covers, armrest covers, laminates for
soundproofing, insulation laminates against moisture, noise acoustic insulative
laminates, door panel laminates, floor laminates, roof laminates ,sorbent pads..
Laminates for interior
P.Gulic , march 2016
COMPOSITION of CAR LA LAMINATES
• laminated linings with PU foam thicknesses 1,5mm-20mm density 25kg-60kg/m3 /low emissions, high air permeability – reticulated foams
• thermo adhesive linings with glue powder, WEB films for leather lamination forclima seats
• Membrane laminates
• 3D mesh laminates for clima/cooling- heating seats
• Selfadhesive laminates
• Felt, watte laminates
• Needle punched laminates
• Sorbents layers (humidity off in seats)
• Sound- noise insulation/acoustic foams
• Sound - noise insulation felts
• FAR laminates
Laminates for interior
„ From the car with a smile“
Laminates for interior
BI-laminates. TRI-laminates, MULTI-laminates used for different application in automotive, aircraft, railway interiors for:
• Classic Seat covers
• Clima Seat covers
• Armrests
• Headrests
• Seat heaters
• Door panel
• Floor
• Roof
• Sound insulation
Laminates for interior
Noise acoustic insulation:
Laminates for interior
AVIATION industry:
RAILWAY industry:
Laminates for interior
TECHNICAL SPECIFICATION /Group of products
FACE MATERIAL with FORI FOAMFace material:vinyl,fabric,alcantara
For OEM: Daimler,Opel,Skoda..
PROPERTY METHOD UNIT Range
1.0 Product
1.1 Weight ISO 3801 g/m2 400-1000
1.2 Thickness ISO 5084 mm 2,0-20,0
1.3 Width ISO 3932 mm 1000-2000
1.4 Peel strength DIN 53357 N/5cm 2-20
1.5 Flammability MVSS 302, ISO
3795
mm/min ≤ 100
2.0 PU foam
2.1 Density of block DIN EN ISO 845 kg/m3 22 - 60
2.2 Type : ether / esther; open cells/ high air permeability/ barrier foam
/low emission
foam
2.3 Colour White/grey
3.0 Knitted material
3.1 Weight ISO 3801 g/m2 20-100
3.2 Composition PET/PA
Laminates for interior
TECHNICAL SPECIFICATION /Group of products:Plus Pads for seat covers
OEM: VW, SKODA..
FORI SCRIM with PU foam
PROPERTY METHOD UNIT VALUE
1.0 Product
1.1 Weight ISO 3801 g/m2 100- 500
1.2 Thickness ISO 5084 mm 2,0-20,0
1.3 Width ISO 3932 mm 500 -2000
1.4 Peel strength DIN 53357 N/5cm ≥2
1.5 Flammability FMVSS 302 mm/min ≤100
1.6 Fogging DIN 75201B mg <2
2.0 PU foam
2.1 Density of block DIN EN ISO 845 kg/m3 27±2
2.2 Compression stress
value at 40%
DIN EN ISO 3386/1 kPa 4,2±0,80
2.3 Compression set DIN EN ISO 1856 % <5
2.4 Elongation DIN 53571, ISO 1798 % >90
2.5 Tension strength DIN 53571, ISO 1798 kPa > 80
2.6 Flammability FMVSS 302 mm/min ≤100
2.7 Fogging DIN 75201 A/B mg <2
2.8 Colour White ,grey,
antrazit
3.0 Knitted material
3.1 Weight ISO 3801 g/m2 20-85
3.2 Composition 100% PET of PA
Laminates for interior
TECHNICAL SPECIFICATION / Group of products: Plus Pads for seat covers
OEM:Land Rover, Rover..
FORI NONWOVEN / FELT / WATTE / NEEDLE PUNCHED MATERIAL with PU foam
PROPERTY METHOD UNIT VALUE
1.0 Product
1.1 Weight ISO 3801 g/m2 150-650
1.2 Thickness ISO 5084 mm 3,0 – 20,0
1.3 Width ISO 3932 mm 500 - 2000
1.4 Peel strength DIN 53357 N/5cm ≥2
1.5 Flammability FMVSS 302 mm/min ≤100
2.0 PU foam
2.1 Density of block DIN EN ISO 845 kg/m3 26 - 55
2.2 Compression stress
value at 40%
DIN EN ISO 3386/1 kPa 3-5
2.3 Compression set DIN EN ISO 1856 % <8
2.4 Elongation DIN 53571, ISO
1798
% >90
2.5 Tension strength DIN 53571, ISO
1798
kPa > 80
2.6 Flammability FMVSS 302 mm/min ≤100
2.7 Fogging DIN 75201 A/B mg <2
2.8 Colour White/grey /antrazit
3.0 Nonwoven material
3.1 Weight ISO 3801 g/m2 20g -600g PP or PES
or recycled, mix
Laminates for interior
TECHNICAL SPECIFICATION /Group of products: termoadhesive pads for seat heaters or leather covers
FORI WEB film with FORI SCRIM and FOAM
PROPERTY METHOD UNIT VALUE
1.0 Product
1.1 Weight ISO 3801 g/m2 150-500
1.2 Thickness ISO 5084 mm 3,0-10,0
1.3 Width ISO 3932 mm 500-2000
1.4 Peel strength DIN 53357 N/5cm ≥2
1.5 Flammability FMVSS 302 mm/min ≤100
2.0 PU foam
2.1 Density of block DIN EN ISO 845 kg/m3 25-40
2.2 Compression stress
value at 40%
DIN EN ISO 3386/1 kPa 4,2±1
2.3 Compression set DIN EN ISO 1856 % <8
2.4 Elongation DIN 53571, ISO
1798
% >90
2.5 Tension strength DIN 53571, ISO
1798
kPa > 80
2.6 Flammability FMVSS 302 mm/min ≤100
2.7 Fogging DIN 75201 A/B mg <2
2.8 Colour White,grey,
antrazit
3.0 Knitted material nonelastic or elastic
3.1 Weight ISO 3801 g/m2 20-60
3.2 Composition 100% PET or
PA
4.0 WEB film
4.1 Composition
CoPA or CoPES
or CoPO
4.2.Temperature range Kofler °C 80-130
Laminates for interior
TECHNICAL SPECIFICATION /Group of products: termoadhesive pads for leather lamination
FORI thermoadhesive powder with FORI SCRIM andFOAM
PROPERTY METHOD UNIT VALUE
1.0 Product
1.1 Weight ISO 3801 g/m2 150-500
1.2 Thickness ISO 5084 mm 3,0-10,0
1.3 Width ISO 3932 mm 500-2000
1.4 Peel strength DIN 53357 N/5cm ≥2
1.5 Flammability FMVSS 302 mm/min ≤100
2.0 PU foam
2.1 Density of block DIN EN ISO 845 kg/m3 25-40
2.2 Compression stress
value at 40%
DIN EN ISO 3386/1 kPa 4,2±1
2.3 Compression set DIN EN ISO 1856 % <8
2.4 Elongation DIN 53571, ISO
1798
% >90
2.5 Tension strength DIN 53571, ISO
1798
kPa > 80
2.6 Flammability FMVSS 302 mm/min ≤100
2.7 Fogging DIN 75201 A/B mg <2
2.8 Colour White,grey,
antrazit
3.0 Knitted material nonelastic or elastic
3.1 Weight ISO 3801 g/m2 20-60
3.2 Composition 100% PET or
PA
4.0 Thermoadhesive
powder
4.1 Composition EVA, PES
4.2.Temperature range Kofler °C 70-110
Laminates for interior
TECHNICAL SPECIFICATION /Group of products: High airpermeable pads for clima seats
FORI high permeable foam or spacer with FORI SCRIM
PROPERTY METHOD UNIT VALUE
1.0 Product
1.1 Weight ISO 3801 g/m2 150-500
1.2 Thickness ISO 5084 mm 3,0-10,0
1.3 Width ISO 3932 mm 500-2000
1.4 Peel strength DIN 53357 N/5cm ≥2
1.5 Flammability FMVSS 302 mm/min ≤100
2.0 PU foam
2.1 Density of block DIN EN ISO 845 kg/m3 25-40
2.2 Compression stress
value at 40%
DIN EN ISO 3386/1 kPa 4,2±1
2.3 Compression set DIN EN ISO 1856 % <8
2.4 Elongation DIN 53571, ISO
1798
% >90
2.5 Tension strength DIN 53571, ISO
1798
kPa > 80
2.6 Flammability FMVSS 302 mm/min ≤100
2.7 Fogging DIN 75201 A/B mg <2
2.8 Colour White,grey
2.9.Air permeability DIN EN ISO 9237/DIN EN
ISO 7231 20cm2 ; l/m2 x
sec
l/m2/s 1500-2500
3.0 Knitted material
3.1 Weight ISO 3801 g/m2 20-60
3.2 Composition 100% PET or
PA
4.0 Spacer mesh 3D
4.1 Composition 100% PES
4.2.Thickness ISO 5084 mm 3,0-10,0
Laminates for interior
TECHNICAL SPECIFICATION /Group of products:Low emission plus pads for seat covers
LOW EMISSION FORI FOAM with knitted scrimOEM:Daimler
PROPERTY METHOD UNIT VALUE
1.0 Product
1.1 Weight ISO 3801 g/m2 100-500
1.2 Thickness ISO 5084 mm 3,0-15,0
1.3 Width ISO 3932 mm 500-2000
1.4 Peel strength DIN 53357 N/5cm ≥3
1.5 Flammability FMVSS 302 mm/min ≤100
Emissions
accordance with
DBL 5450.10
2.0 PUR foam
accordance with
DBL 5450
specification
30-45kg ether
PU foam low
emission
3.0 Knitted
material
3.1 Weight ISO 3801 g/m2 20-60
3.2 Composition 100% PA
or PES
Laminates for interior
HIGH AIR PERMEABLE MULTI-LAMINATES
With the absorption of condensation/liquids and odour off
TECHNICAL SPECIFICATION /Group of products:Spacer mesh plus pads for clima seat
PROPERTY Method VALUE
Products parameters
WeightThicknessAdhesion
FlammabilityAir permeability
ISO 3801ISO 5084
DIN 53357FMVSS 302DIN EN ISO
9237/DIN EN ISO 7231 20cm2 ; l/m2
x sec
150-600 g/m2
5-25 mm3-15 N/5cm
≤ 100 mm/minMin 2000 l/m2/s
Composition of multilaminatematerial:
1 st layer: WEB film-GLUE2nd layer: PU FOAM high airpermeability
3rd layer:SPACER/MESH/3D material
high air permeability4rd layer: superabsorptive
material
ISO 3801 20-70 g/m2 CoPa100% PUR foam 22-45
kg/m3
100%PES 3-10mm
Nonwoven material withabsorber
Laminates for interior
FORI NOISE ABSORPTIVE / Barrier PADS selfadhesive
TECHNICAL SPECIFICATION /Group of products:Plus pad for noise insulation
PROPERTY Method VALUE
Products
WeightThicknessAdhesion on plastic or metal partsFlammability
ISO 3801ISO 5084
DIN 53357FMVSS 302
150-600 g/m2
5-25 mm3-20 N/5cm
≤ 100 mm/min
Composition of multilaminatematerial:
1 st layer: GLUE coating2nd layer: NOISE barrier felt
or FOAM
ISO 3801 20-70 g/m2 PU foam 22-45 kg/m3
Or Felt
Laminates for interior
TECHNICAL SPECIFICATION /Group of products:ACOUSTIC Fori FOAM
Acoustic foam is an open celled foam used for acoustic treatment. It attenuates airbornesound waves by increasing air resistance, thus reducing the amplitude of the waves. Theenergy is dissipated as heat. Acoustic Foam can be made in several different colors, sizes
and thickness.Acoustic foam comes in a variety of sizes and can be attached to walls, ceilings, doors, and
other features of a room to control noise levels, vibration, and echoes.Many acoustic foam products are treated with dyes and/or fire retardants
The objective of acoustic foam is to improve the sound quality by removing residual soundin any space. This purpose requires strategic placement of acoustic foam panels on walls,
ceiling and floors, effectively eliminating resonance.The objective is to enhance the properties of sound by improving speech clarity and sound
quality.For this reason, acoustic foam is often used in recording studios. The purpose is to reduce,
but not entirely eliminate resonance within the room. This is achieved by placing similarsized pieces of foam, often in the shape of cones or triangles, on opposite walls.
How Acoustic Foam WorksAcoustic foam is a lightweight material made from polyurethane foam either polyether or
polyester. It is cut into tiles - often with pyramid or wedge shapes - which are suited to placing on the walls of a recording studio or a similar type of environment to act as a sound
absorber, on door panel in car.
Absorption coefficient a and Frequency Hz
PUR ETHER 125 250 500 1000 2000 40001 FON 0,18 0,31 0,64 0,75 0,86 0,882 VAL 0,37 0,46 0,78 0,90 0,99 1,14
PUR ESTHER 125 250 500 1000 2000 40003 FON 0,22 0,34 0,83 1,10 1,07 1,03
4 VAL 0,29 0,54 1,10 1,09 1,06 1,21
Considering the basic development strategy dictating an integrated and complex offer, we also
developed a plastic programme, with plastic processing and plastic injection.
Most frequent input materials: PA, ABS, ABS PC, PEHD,
PS, PP, PC, PBT, HDTP, PEEK.
As additional services we also offer services of assembly and
powder coating of plastic parts (painting), tool making, tampo
prints and other.
The machinery consists of 13 Kraussmaffei plas tic injection machines for products with weight of up to 3,600 g and closing forces from 40 to 800 tons. All machines with more than 150 tons of clos ing forces are equipped with a SEPRO automatic manipulator.
Plastic parts for interior
INPUT & TECHNOLOGY & OUTPUT:Stainless steel (INOX) ordinary and zincked (warm and electro) metal sheet, aluminum sheet, plastic and other.Certain presses are equipped with a feeding de vice for large series manufacture of aesthetically less demanding products.
On the presses, we use classical procedures for differently large series of aesthetically demand ingproducts for various purposes of use.
The manufacture of products of demanding shape can only be performed on deep drawing presses or tools with which we have several years of experience and are well familiar with them.
Metal parts for interior
In our own tool making shop, we design and produce tools intended for shaping of all types of sheet metal (stainless, zinc coated, black or pre enameled sheet metal).When making tools, we fully conform to the customers’ requirements and needs. Due to limitations of production capacities, we have decided to hire subcontractors, tool making specialists, for the manufacture of plastic product injection tools.
The engineering tools most often used in the concept laying process are Pro/Engineer and Catia. In case of need for execution of more extensive specific mechanical analyses of products, we seek collaboration with external specialised ex pert institutions.
We can do:
- Tools for metal sheet recasting(progressive, transfer and other tools)- Welding devices for robotic welding in automo tive industry and household
appliances industry.- Custom made welding, control, measuring and other devices.- Automation of industrial plants and machines.- Processing machine service
In any industrial area, we offer, considering the customer’s wishes, an execution of integrated development solutions within which we guarantee cooperation in joint projects, from design conception of products or assemblies to the phase of laying concepts for individual assemblies or their components.
Tool making for interior
From the car with a smile
Prešernova cesta 1,3320 Velenje, SloveniaE-mail: [email protected]:+386 (0)3 898 47 00
Dombrava 1,5293 Dombrava, Slovenia
E-mail: [email protected]
Tel:+386 (0)5 330 51 67
Stojana Protića bb, 34000 Kragujevac, Serbia
E-mail:[email protected]
Tel:+381 0 34 240 400