+ All Categories
Home > Documents > Mitubishi Lancer Evo X R4 KIT - MML Sports · PDF fileMitsubishi Lancer Evolution X R4 kit. ....

Mitubishi Lancer Evo X R4 KIT - MML Sports · PDF fileMitsubishi Lancer Evolution X R4 kit. ....

Date post: 20-Mar-2018
Category:
Upload: lykhanh
View: 246 times
Download: 3 times
Share this document with a friend
1
Mitsubishi Lancer Evolution X R4 kit . WWW.MML-SPORTS.COM . VR4 homologation extension authorises the following parts and modifications for R4 category, the remaining needs to conform to Group N regulations All R4 parts and modifications, except the side impact protection kit (items 5-8 in ‘Body’ group), are optional in R4 category All R4 parts are clearly identified on the diagrams below; standard and Group N parts are shown for reference and are not supplied with the kit All items marked with asterisk * are modifications that are not supplied as part of the kit and need to be done by own means Front suspension R4 parts 1 Crossmember 2 Lower arm assy LH/RH 3 ARB link assy LH/RH 4 Top mount assy LH/RH 5 Gearbox mount bracket *6 Spring housing modification 7 Centremember reinforcement panel Standard parts 8 GpN/R4 damper assy LH/RH 9 Steering knuckle LH/RH 10 Anti-roll bar 11 Centremember Notes (1) – (3) to be used together as kit (4) bearing spec D22 H28 (6) only required if using (4) Rear suspension R4 parts 1 Crossmember 2 Upper arm assy LH/RH 3 Camber rod assy LH/RH 4 Toe rod assy LH/RH 5 Longitudinal rod assy LH/RH 6 ARB link assy LH/RH 7 Top mount assy LH/RH *8 Spring housing modification Standard parts 9 GpN/R4 damper assy LH/RH 10 Knuckle LH/RH 11 Anti-roll bar Notes (1) – (6) to be used together as kit (7) bearing spec D18 H23 Body R4 parts *1 Bonnet panel modification *2 Boot lid panel modification *3 Rear spoiler modification 4 Front bumper support bar *5 Door panel modification 6 Door side impact absorbing foam 7 Composite door card 8 Polycarbonate side window 9 Laminated windscreen 10 Polycarbonate rear window Notes (5) – (8) applicable to all four doors (5) – (8) compulsory for R4 category (9) has to be ordered separately Interior R4 parts 1 Dashboard assy *2 Dashboard bracket removal 3 Heater unit *4 Dashboard wiring loom modification Free parts 5 Dashboard support bracket 6 Heater ducting Notes Mounting of (3) is free (4) and (5) not shown on diagram (6) not included in kit MML Sports Ltd, Leigh Road, Swift Valley, Rugby, CV21 1DS, UK +44 (0) 1788 537788, [email protected] 9 8 10 6 7 11 2 3 5 4 1 6 7 5 8 3 2 10 9 4 1 3 2 6 1 1 2 7 8 3 11 4 9 10 5 6
Transcript
Page 1: Mitubishi Lancer Evo X R4 KIT - MML Sports · PDF fileMitsubishi Lancer Evolution X R4 kit. . VR4 homologation extension authorises the following parts and modifications for R4 category,

Mitsubishi Lancer Evolution X R4 kit

.

WWW.MML-SPORTS.COM .

VR4 homologation extension authorises the following parts and modifications for R4 category, the remaining needs to conform to Group N regulations All R4 parts and modifications, except the side impact protection kit (items 5-8 in ‘Body’ group), are optional in R4 category All R4 parts are clearly identified on the diagrams below; standard and Group N parts are shown for reference and are not supplied with the kit All items marked with asterisk * are modifications that are not supplied as part of the kit and need to be done by own means

Front suspensionR4 parts

1 Crossmember2 Lower arm assy LH/RH3 ARB link assy LH/RH4 Top mount assy LH/RH5 Gearbox mount bracket

*6 Spring housing modification7 Centremember reinforcement panel

Standard parts8 GpN/R4 damper assy LH/RH9 Steering knuckle LH/RH

10 Anti-roll bar11 Centremember

Notes(1) – (3) to be used together as kit(4) bearing spec D22 H28(6) only required if using (4)

Rear suspensionR4 parts

1 Crossmember2 Upper arm assy LH/RH3 Camber rod assy LH/RH4 Toe rod assy LH/RH5 Longitudinal rod assy LH/RH6 ARB link assy LH/RH7 Top mount assy LH/RH

*8 Spring housing modificationStandard parts

9 GpN/R4 damper assy LH/RH10 Knuckle LH/RH11 Anti-roll bar

Notes(1) – (6) to be used together as kit(7) bearing spec D18 H23

BodyR4 parts

*1 Bonnet panel modification*2 Boot lid panel modification*3 Rear spoiler modification4 Front bumper support bar

*5 Door panel modification6 Door side impact absorbing foam7 Composite door card8 Polycarbonate side window9 Laminated windscreen

10 Polycarbonate rear windowNotes(5) – (8) applicable to all four doors(5) – (8) compulsory for R4 category(9) has to be ordered separately

InteriorR4 parts

1 Dashboard assy*2 Dashboard bracket removal3 Heater unit

*4 Dashboard wiring loom modificationFree parts

5 Dashboard support bracket6 Heater ducting

NotesMounting of (3) is free(4) and (5) not shown on diagram(6) not included in kit

MML Sports Ltd, Leigh Road, Swift Valley, Rugby, CV21 1DS, UK +44 (0) 1788 537788, [email protected]

9

8

10

6

711

2

3

5

41

67

5

8

3 210

9

4

1

32 6

1

1

2

78

3

11

4

910

5

6

Recommended