Getting Started with Your Mobius
1. Insert your Micro SD card into the slot located next to the USB Port.
2. Connect USB power adapter for 2-3 hours to fully charge the clock.
3. Press the button to turn on the camera. The blue LED will flash and after 3 seconds, a yellow LED will stay solid indicating that the device is in stand-by mode.
The Mode Button
Pressing the Mode button, symbolized on the device by the letter M, enables you to switch the Mobius between 4 different modes:• Video Mode 1 (yellow LED) records videos at
1080p/30fps. (To configure the video mode refer to the User Manual)
• Video Mode 2 (blue LED) records videos at 720p/60fps. (To configure the video mode refer to the User Manual)
• Photo Mode (red LED) is for taking pictures.• Playback Mode (red LED) is for viewing videos on
the Mobius. This feature is only accessiblewhen the special A/V-out cable is connected.
View Videos on a PC or Mac
1. On a PC
a. Connect the Mobius to the PC using the enclosed USB cable.
b. Double-click on “My Computer” and locate “Removable Disk”. c. Double-click on “Removable Disk” d. Double-click on “DCIM” e. Double-click on “100HDDVR” f. You may now copy, move, or play your video files.
Using Video or Photo Modes
1. Video mode – While in stand-by mode, press the M button on the device to change to either the Yellow or Blue solid LED light, depending on which Video Mode you’d like to use. Once the mode is selected, press the
button to start recording. By pressing the button again, the recording will stop and save to the Micro SD card.
2. Photo Mode – While in stand-by mode, press the M button on device to change to the Red solid LED. Once the mode is selected, press the button to take a picture, which will be saved to the Micro SD card.