Date post: | 19-Aug-2015 |
Category: |
Automotive |
Upload: | koen-jp-van-de-velde |
View: | 27 times |
Download: | 1 times |
Who is mObridge?Who is mObridge?
mObridge is an Australian automotive electronics design & manufacturing company, specialising in automotive aftermarket audio visual and telephony solutions for MOST-Bus and CAN-Bus systems.
Our mission is to make products that improve functionality and performance of the vehicles factory Audio Visual system in the most seamless way.
Our current but expanding expertise centre on:
• MOST25, MOST50 & MOST150 fibre optic connection
• CAN-BUS connection and diagnostic interfacing
• Advanced iPod / iPhone interfacing
• Satellite Radio/DAB/DAB+ integration
• DSP audio processing
• USB drivers
• MP3 decoding & playback
• Apple Mfi Advanced Interfacing
• Android & iPhone apps
• Bluetooth interfacing
ProductsProducts
iPod and iPhone Integration
M2.Media
iPhone, iPod and USB Audio integration with the factory Audio SystemFeatures:• iPhone/iPod USB interface 30 pin and lightning jack connection support• 3.5mm Auxillary Audio Input• USB MP3 Audio Playback• USB Software updatable
MOST Bus Compatibility – Audi, BMW, Mercedes, Mini, Porsche
CAN Bus Compatibility – Audi, Skoda, VW
ProductsProducts
M2.Connect
Parrot Bluetooth technology for Phone and Audio streaming. Limited Audio control Features:• Bluetooth Telephony for most Bluetooth enabled phones• Bluetooth Audio streaming with track up/down control• USB Software updatable
MOST Bus Compatibility – Audi, BMW, Landrover, Mercedes, Mini, Porsche, Volvo
CAN Bus Compatibility – Audi, Skoda, VW
Bluetooth Integration
ProductsProducts
M2.Pro
Parrot Bluetooth technology for Phone and Audio streaming. Full control Features:• iPhone/iPod USB interface 30 pin and lightning jack connection support•Apple iAP over bluetooth (Browse iPhone)• 3.5mm Auxillary Audio Input• USB MP3 Audio Playback• USB Software updatable
MOST Bus Compatibility – Audi, BMW, Mercedes, Mini, Porsche
CAN Bus Compatibility – Audi, Skoda, VW
Bluetooth & Multimedia Integration
ProductsProducts
M1000-M-DA1
Digital Pre-Amplifier with Toslink output. Full Audio control via Factory Head Unit. Features:• Toslink Digital Output for Stereo Audio• 300MHz digital processing for crystal clear audio signal• Connect to DSP of direct to Amplifier with Toslink Digital Input• Amplifier trigger signal
MOST Bus Compatibility – Aston Martin*, Audi, BMW, Landrover, Lamborghini, Mercedes, Mini, Porsche, Volvo
* Special Order
Aftermarket Audio Integration
ProductsProducts
M1000-M-DA2
Analogue Pre-Amplifier with 8 channel RCA output. Full Audio control via Factory Head Unit. Features:• 8 Channel RCA Output• 400MHz Blackfin Digital Signal Processing for superior audio performance• Burr Brown DACs for superior Pre-Amp audio quality• Amplifier trigger signal
MOST Bus Compatibility – Audi, BMW, Landrover, Lamborghini, Mercedes, Mini, Porsche, Volvo
Aftermarket Audio Integration
Working on at this moment Working on at this moment
• Replacing current M2.Media, M2.Connect & M2.Pro
• Staggered release from M2 to M3 Platform from September 2015
• Big change - Addition of DIP Switches for vehicle configuration– Ease of set up without the mObridge Wizard
• New models added with extra features
M2 re-platforming to M3 Platform
ProductsProducts
M1000-M-DA3
Analogue Pre-Amplifier with 8 channel RCA output. Full DSP with Graphical Interface. Full Audio control via Factory Head Unit. Features:• 8 Channel RCA Output• 1024 Point Graphic EQ
•Each channel plus master EQ• Time Alignment & Phase adjustment• Graphical User Interface via PC
MOST Bus Compatibility – Aston Martin*, Audi, BMW, Landrover, Lamborghini, Mercedes, Mini, Porsche, Volvo
* Special Order
Aftermarket Audio Integration
ProductsProducts
M1000-M-DA3 Configuration Screen Shot
Speaker Selection for individual set up Output Channel selector
Master EQ - 1024Points to choose from!
Fine tune your EQ points – includes Channel Gain, Frequency Fine Tune,Frequency Magnitude, Q Adjustment for both Left & Right
Time AlignmentFine Tuning
Cross Hair TimeAlignment for eachindividual speaker
Preset MemorySelector
ProductsProducts
M1000-M-DA3 Channel EQ Screen Shot
Filter Type – High Pass, Low Pass, Band Pass. Butterworth or Chebychev
Filter FrequencyHigh & Low Pass
Filter Slope
Individual Speaker Fine tuning EQ points – includes Channel Gain, Frequency Fine Tune,Frequency Magnitude, Q Adjustment for both Left & Right
Gain Slide
Individual EQ - 1024Points to choose from!
Individual TimeAlignment Fine
Tune
Channel Watermark
Individual Speaker Selection
Individual SpeakerTime Alignment
Cross Hair Adjustment
Speaker / Channel Identifier
ProductsProducts
M1000-M-DAB
DAB or DAB+ radio integration with the factory Audio System for crystal clear digital radio.Features:• Bluetooth Telephony for most Bluetooth enabled phones• Bluetooth Audio streaming with track up/down control• USB Software updatable• DSP for MOST Synchronization
MOST Bus Compatibility – Audi, BMW, Landrover, Lamborghini, Mercedes, Mini, Porsche, Volvo
DAB/DAB+ Integration
ProductsProducts
iPod and iPhone Integration
M3.Media DAB CAN
iPhone, iPod and USB Audio integration with the factory Audio SystemFeatures:• DAB/DAB+ Radio •iPhone/iPod USB interface 30 pin and lightning jack connection support• 3.5mm Auxillary Audio Input• USB MP3 Audio Playback• USB Software updatable• Dip-Switches for configuration
CAN Bus Compatibility – Audi, Skoda, VW
Release date: September 2015
ProductsProducts
M3.Pro DAB CAN
DAB+ Radio TunerParrot Bluetooth technology for Phone and Audio streaming. Full control Features:• iPhone/iPod USB interface 30 pin and lightning jack connection support• 3.5mm Auxiliary Audio Input• USB MP3 Audio Playback• USB Software updatable• Dip-Switches for configuration
CAN Bus Compatibility – Audi, Skoda, VW
Release date: September 2015
Bluetooth, Multimedia & DAB Integration
ProductsProducts
mObridge DSP
Analogue Pre-Amplifier with 8 channel RCA output. Full DSP with Graphical Interface. Full Audio control via Factory Head Unit. Features:• 8 Channel RCA Output• 1024 Point Graphic EQ
•Each channel plus master EQ• Time Alignment & Phase adjustment• Graphical User Interface via PC• CAN Bus compatible• Bluetooth phone, audio streaming & control• iPad and Android App for configuration
Compatible with all aftermarket head units with RCA output
Release date: Q4 2015
Aftermarket Audio Integration
Reverse EngineeringReverse Engineering
mObridge products are built by ‘reverse engineering’ factory systems.
In order to reverse engineer any system, first we need to get hold of one so that we can view the source code. Often there are many different models of system for the same vehicle type, which can cause some unforeseen compatibility issues.
mObridge ‘Vehicle Compatibility’ lists, are what we are sure will work with our products. Vehicles that fall outside of these lists are often not compatible and would require a new software rebuild based on ‘reverse engineering’ that particular vehicles system software. THIS IS NOT A FAULT OF THE PRODUCT, nor is it a warranty issues!
Although we do update software to incorporate new vehicle compatibility and fix potential bugs, the updating of any products already outside of the mObridge premises is not a warranty issue.
We recommend the distributor to update all available software releases to incorporate the latest vehicle compatibility.