Solenoid
EMDV-10-C1
EMDV-08-O6EMDV-10-O1EMDV-12-O1
EMDV-08-C3EMDV-10-C3
DIRECT ACTING SPOOL TYPE 2-WAY N.C.
DIRECT ACTING SPOOL TYPE 2-WAY N.O.
DIRECT ACTING POPPET TYPE 2-WAY N.C.
5 GPM8 GPM
18 GPM
5 GPM8 GPM
18 GPM
5 GPM6 GPM
C0820C1020C1220
C0820C1020C1220
C0820C1020
EMDV-08-C7EMDV-10-C2EMDV-12-C2EMDV-16-C2
EMDV-08-O7EMDV-10-O2EMDV-12-O2EMDV-16-O2
PILOT OPER. POPPET TYPE 2-WAY N.C.
PILOT OPER. POPPET TYPE 2-WAY N.O.
10 GPM18 GPM36 GPM50 GPM
10 GPM18 GPM36 GPM50 GPM
C0820C1020C1220C1620
C0820C1020C1220C1620
EMDV-08-C8
EMDV-12-C4EMDV-16-C4
EMDV-10-O4EMDV-12-O4EMDV-16-O4
P.O. POPPET 2-WAY N.C. FREE REVERSE 10 GPM
36 GPM50 GPM
20 GPM36 GPM50 GPM
C0820
C1220C1620
C1020C1220C1620
EMDV-08-3LEMDV-10-3AEMDV-12-3A replaced by:ESDV-12-3A
EMDV-10-3CEMDV-12-3C replaced by:ESDV-12-3C
5 GPM8 GPM
12 GPM16 GPM
8 GPM12 GPM16 GPM
C0830C1030C1230C1230
C1030C1230C1230
EMDV-08-3JEMDV-10-3BEMDV-12-3B replaced by:ESDV-12-3BEMDV-08-3K
EMDV-10-3DEMDV-12-3D replaced by:ESDV-12-3D
5 GPM8 GPM
12 GPM16 GPM
5 GPM
8 GPM12 GPM16 GPM
C0830C1030C1230C1230C0830
C1030C1230C1230
MODEL DESCRIPTION FLOW CAVITY
10
SPOOL TYPE 3-WAY OPEN CROSSOVER
SPOOL TYPE 3-WAY CLOSED CROSSOVER
SPOOL TYPE 3-WAY OPEN CROSSOVER
SPOOL TYPE 3-WAY CLOSED CROSSOVER
EMDV-08-C6
EMDV-12-C1
Valves
EMDV-08-O8 P.O. POPPET 2-WAY N.O. FREE REVERSE 10 GPM C0820
1
2
1
2
1
2
1
2
1
2
1
2
1
2
3 1
2
3 2
1
EMDV-10-C4 (on request) 20 GPM C1020
EMDV-08-3M (on request) 5 GPM C0830
Reference: 520-P-100000-EN-03/10.2019
EMBV-08-4J SPOOL TYPE 3 POSITION 4-WAY TANDEM 5 GPM C0840
EMBV-08-4K SPOOL TYPE 3 POSITION 4-WAY OPEN 5 GPM C0840
EMBV-08-4L SPOOL TYPE 3 POSITION 4-WAY CLOSED 5 GPM C0840
4/3 SOLENOID DIRCTIONAL CARTRIDGE VALVEWK43G... 8 GPM AM
4/3 SOLENOID DIRCTIONAL CARTRIDGE VALVEWK43D... 8 GPM AN
4/2 SOLENOID CARTRIDGE VALVEWS42GNA5... 8 GPM AT / C1040
3/2 SOLENOID CARTRIDGE VALVEWS32GNA5... 6 GPM AM2
1 3
4/2 CARTRIDGE SPOOL VAVLEWKP42ALA1...WKP42ANA3...WK42A...
1 GPM3 GPM8 GPM
ANANAN
32
1 4
3/2 CARTRIDGE SPOOL VAVLEWKP32G / OLA1...WKP32G / ONA3...WK32G / O...
1 GPM AM3 GPM8 GPM
AMAM
SPOOL TYPE 3 POSITION 4-WAY MOTOR
MODEL DESCRIPTION FLOW CAVITY
EMBV-10-4J 9 GPM C1040
EMBV-10-4K 7 GPM C1040
EMBV-10-4L 6 GPM C1040
EMBV-08-4M (on request) 5 GPM C0840
Manual Over-Ride button FOR SIZE 10-12-16 PUSH-TYPE SOLENOID VALVE
EMSV-.. (on request) SOLENOID VERSION FOR SOFT SHIFT VALVE
COIL INFORMATION
4
13
2
4
3
2
1
13
24
3 1
4 2
Solenoid Valves
EMBV-10-4M 6 GPM C1040
2
1 3
32
1 4
32
1 4
2 4
1 3
SQUARE COIL TYPE “L” AND “S”ROUND COIL TYPE D 2.2” /.875”
EMDV-10-3E 8 GPM C1030
EMDV-08-3NEMDV-08-3P
SPOOL TYPE 3-WAY CLOSED CROSSOVERSPOOL TYPE 3-WAY OPEN CROSSOVER
5 GPM5 GPM
C0830C0830
EMDV-08-4J
EMDV-12-4F replaced by:ESDV-12-4F
SPOOL TYPE 2 POSITION 4-WAY 5 GPM
20 GPM20 GPM
C0840
C1240C1240
EMDV-10-4AEMDV-12-4A replaced by:ESDV-12-4A
SPOOL TYPE 4-WAY CLOSED CROSSOVER 8 GPM16 GPM16 GPM
C1040C1240C1240
EMDV-08-4KEMDV-10-4BEMDV-12-4B
SPOOL TYPE 2 POSITION 4-WAY N.C. 5 GPM8 GPM
16 GPM
C0840C1040C1240
EMDV-08-4LEMDV-10-4CEMDV-12-4C
SPOOL TYPE 2 POSITION 4-WAY N.O. 5 GPM8 GPM
16 GPM
C0840C1040C1240
EMDV-08-4N SPOOL TYPE 2 POSITION 4-WAY 5 GPM C0840
EMDV-10-4DEMDV-12-4D
SPOOL TYPE 2 POSITION 4-WAY 8 GPM16 GPM
C1040C1240
EMDV-10-4EEMDV-12-4E
SPOOL TYPE 2 POSITION 4-WAY 8 GPM16 GPM
C1040C1240
EMDV-08-4P SPOOL TYPE 2 POSITION 4-WAY 5 GPM C0840
SPOOL TYPE 3-WAY NORMALLY OPEN
MODEL DESCRIPTION FLOW CAVITY
SPOOL TYPE 4-WAY OPEN CROSSOVER
SPOOL TYPE 4-WAY CLOSED CROSSOVER
EMDV-08-3R 5 GPM C0830SPOOL TYPE 3-WAY OPEN CROSSOVER
3 1
4 2
1
23
32
1
3 1
4 2
3 1
4 2
3 1
4 2
3 1
4 2
3 1
4 2
3 1
4 2
3 1
4 2
2
1 3
Solenoid Valves
EMBV-08-3J SPOOL TYPE 3 POSITION 3-WAY CLOSED 5 GPM C0830
1 3
2
ESDV-12-4B 16 GPM C1240
ESDV-12-4C 16 GPM C1240
ESDV-12-4D 16 GPM C1240
Solenoid
EMDV-10-C1
EMDV-08-O6EMDV-10-O1EMDV-12-O1
EMDV-08-C3EMDV-10-C3
DIRECT ACTING SPOOL TYPE 2-WAY N.C.
DIRECT ACTING SPOOL TYPE 2-WAY N.O.
DIRECT ACTING POPPET TYPE 2-WAY N.C.
5 GPM8 GPM
18 GPM
5 GPM8 GPM
18 GPM
5 GPM6 GPM
C0820C1020C1220
C0820C1020C1220
C0820C1020
EMDV-08-C7EMDV-10-C2EMDV-12-C2EMDV-16-C2
EMDV-08-O7EMDV-10-O2EMDV-12-O2EMDV-16-O2
PILOT OPER. POPPET TYPE 2-WAY N.C.
PILOT OPER. POPPET TYPE 2-WAY N.O.
10 GPM18 GPM36 GPM50 GPM
10 GPM18 GPM36 GPM50 GPM
C0820C1020C1220C1620
C0820C1020C1220C1620
EMDV-08-C8
EMDV-12-C4EMDV-16-C4
EMDV-10-O4EMDV-12-O4EMDV-16-O4
P.O. POPPET 2-WAY N.C. FREE REVERSE 10 GPM
36 GPM50 GPM
20 GPM36 GPM50 GPM
C0820
C1220C1620
C1020C1220C1620
EMDV-08-3LEMDV-10-3AEMDV-12-3A replaced by:ESDV-12-3A
EMDV-10-3CEMDV-12-3C replaced by:ESDV-12-3C
5 GPM8 GPM
12 GPM16 GPM
8 GPM12 GPM16 GPM
C0830C1030C1230C1230
C1030C1230C1230
EMDV-08-3JEMDV-10-3BEMDV-12-3B replaced by:ESDV-12-3BEMDV-08-3K
EMDV-10-3DEMDV-12-3D replaced by:ESDV-12-3D
5 GPM8 GPM
12 GPM16 GPM
5 GPM
8 GPM12 GPM16 GPM
C0830C1030C1230C1230C0830
C1030C1230C1230
MODEL DESCRIPTION FLOW CAVITY
10
SPOOL TYPE 3-WAY OPEN CROSSOVER
SPOOL TYPE 3-WAY CLOSED CROSSOVER
SPOOL TYPE 3-WAY OPEN CROSSOVER
SPOOL TYPE 3-WAY CLOSED CROSSOVER
EMDV-08-C6
EMDV-12-C1
Valves
EMDV-08-O8 P.O. POPPET 2-WAY N.O. FREE REVERSE 10 GPM C0820
1
2
1
2
1
2
1
2
1
2
1
2
1
2
3 1
2
3 2
1
EMDV-10-C4 (on request) 20 GPM C1020
EMDV-08-3M (on request) 5 GPM C0830
Reference: 520-P-100000-EN-03/10.2019
EMBV-08-4J SPOOL TYPE 3 POSITION 4-WAY TANDEM 5 GPM C0840
EMBV-08-4K SPOOL TYPE 3 POSITION 4-WAY OPEN 5 GPM C0840
EMBV-08-4L SPOOL TYPE 3 POSITION 4-WAY CLOSED 5 GPM C0840
4/3 SOLENOID DIRCTIONAL CARTRIDGE VALVEWK43G... 8 GPM AM
4/3 SOLENOID DIRCTIONAL CARTRIDGE VALVEWK43D... 8 GPM AN
4/2 SOLENOID CARTRIDGE VALVEWS42GNA5... 8 GPM AT / C1040
3/2 SOLENOID CARTRIDGE VALVEWS32GNA5... 6 GPM AM2
1 3
4/2 CARTRIDGE SPOOL VAVLEWKP42ALA1...WKP42ANA3...WK42A...
1 GPM3 GPM8 GPM
ANANAN
32
1 4
3/2 CARTRIDGE SPOOL VAVLEWKP32G / OLA1...WKP32G / ONA3...WK32G / O...
1 GPM AM3 GPM8 GPM
AMAM
SPOOL TYPE 3 POSITION 4-WAY MOTOR
MODEL DESCRIPTION FLOW CAVITY
EMBV-10-4J 9 GPM C1040
EMBV-10-4K 7 GPM C1040
EMBV-10-4L 6 GPM C1040
EMBV-08-4M (on request) 5 GPM C0840
Manual Over-Ride button FOR SIZE 10-12-16 PUSH-TYPE SOLENOID VALVE
EMSV-.. (on request) SOLENOID VERSION FOR SOFT SHIFT VALVE
COIL INFORMATION
4
13
2
4
3
2
1
13
24
3 1
4 2
Solenoid Valves
EMBV-10-4M 6 GPM C1040
2
1 3
32
1 4
32
1 4
2 4
1 3
SQUARE COIL TYPE “L” AND “S”ROUND COIL TYPE D 2.2” /.875”
Reference: 520-P-100000-EN-03/10.2019
TYPE "S" COIL TYPE "S" COIL SEE PAGE SEE PAGE 10-001.110-001.1
1
2
1
2
1.00" [25.4] HEX.1.00" [25.4] HEX.1.88"1.88"[47,6][47,6]
1.88"1.88"[47,6][47,6]
1.10"1.10"[27,9][27,9]
2.80"2.80"[71,1][71,1]
1.351.35[34,3][34,3]
PRESSURE DROP ( P)
PRESSURE DROP ( P)
1010
PSIPSI0
2020
4040
1
G.P.M.(135 SUS)G.P.M.(135 SUS)
2 3
6060
5050
3,83,8
L/M (28,5 cSt)L/M (28,5 cSt)
7,67,6 11,411,4
4 5BARBAR
1,41,4
0,70,7
2,82,8
15,115,1 19194,14,1
3,53,5
ENERGIZEDENERGIZED3030 2,12,1
1-2 & 2-11-2 & 2-1
NOTES:NOTES:1. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-011.11. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-011.12. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.2. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.3. FOR "AC" COILS USE RECTIFIED DIN CONNECTOR 20828.3. FOR "AC" COILS USE RECTIFIED DIN CONNECTOR 20828.
LTBGWDM
TERMINALS TERMINALS=18GA. 24" LEADS=18GA. 24" LEADS=SPADE TERM.=SPADE TERM.=BOLT TERM.=BOLT TERM.=DIN43650=DIN43650=WEATHER-PACK=WEATHER-PACK=DEUTSCH-DT04-2P=DEUTSCH-DT04-2P=METRI-PACK CONN.=METRI-PACK CONN.
= BUNA "N" = BUNA "N" = VITON= VITON
SEALSSEALSNV
SIZESIZE08 = 3/4"-16UNF08 = 3/4"-16UNF
BASICBASIC
TYPETYPEC6=NORMALLY CLOSED SPOOLC6=NORMALLY CLOSED SPOOL 2-WAY, 2-POSITION 2-WAY, 2-POSITION
PORTSPORTS0
02BX02BX06TX06TX
= CARTRIDGE ONLY= CARTRIDGE ONLY= G 1/4" BSPP= G 1/4" BSPP= SAE - #6= SAE - #6 "A" = ALUM. HOUSING "A" = ALUM. HOUSING "S" = STEEL HOUSING "S" = STEEL HOUSING
12D12D24D24D36D36D48D48D115D115D
VOLTAGE VOLTAGE= 12 VDC= 12 VDC= 24 VDC= 24 VDC= 36 VDC= 36 VDC= 48 VDC= 48 VDC= 115 VDC= 115 VDC
AMPSAMPS 1.7 1.7.9.9.6.6.5.5.2.2
EMDV-08-X-C6-X-XXX XEMDV-08-X-C6-X-XXX X
SOLENOID VALVE, NORMALLY CLOSED.SOLENOID VALVE, NORMALLY CLOSED.DIRECT ACTING, SPOOL TYPE (2/2)DIRECT ACTING, SPOOL TYPE (2/2)
Steel = 35/40 Ft-Lb. [47/54 Nm] Steel = 35/40 Ft-Lb. [47/54 Nm]
TORQUE:TORQUE:
Aluminum = 25/30 Ft-Lb. [34/41 Nm]Aluminum = 25/30 Ft-Lb. [34/41 Nm]
Reference: 520-P-100110-EN-00/09.2015
EMDV-08-C6
FEATURES AND BENEFITSFEATURES AND BENEFITS
OPERATIONSOPERATIONS
DESCRIPTIONDESCRIPTION
All external carbon steel parts are plated for longer life against the elements.All external carbon steel parts are plated for longer life against the elements.
Industry common cavity.Industry common cavity.All cartridge valves are 100% functionally tested.All cartridge valves are 100% functionally tested.
type, direct acting, screw in type, solenoid operated, directionaltype, direct acting, screw in type, solenoid operated, directionalThis unit is a NORMALLY CLOSED, TWO POSITION, cartridge type, spoolThis unit is a NORMALLY CLOSED, TWO POSITION, cartridge type, spool
Very efficient, wet-armature solenoid core tube construction.Very efficient, wet-armature solenoid core tube construction.Hardened precision fitted spool & sleeve provides reliable, long life.Hardened precision fitted spool & sleeve provides reliable, long life.Interchangeable solenoid coils & terminations options available.Interchangeable solenoid coils & terminations options available.Continuous-duty, very low heat rise & waterproof solenoid coil.Continuous-duty, very low heat rise & waterproof solenoid coil.
is shifted and allows flow between ports 1 and 2 and 2 and 1.is shifted and allows flow between ports 1 and 2 and 2 and 1.When solenoid coil is energized, the spool in this valveWhen solenoid coil is energized, the spool in this valveno flow from ports 1 to 2 or 2 to 1.no flow from ports 1 to 2 or 2 to 1.When solenoid coil is de-energized, this valve allowsWhen solenoid coil is de-energized, this valve allows
control valve.control valve.
SOLENOID VALVE, NORMALLY CLOSED, SOLENOID VALVE, NORMALLY CLOSED, DIRECT ACTING, SPOOL TYPE (2/2)DIRECT ACTING, SPOOL TYPE (2/2)
Reference: 520-P-100110-EN-00/09.2015
EMDV-08-C6
SPECIFICATIONSSPECIFICATIONS
VALVE CAVITY: #C0820, See Page 0-011.0.VALVE CAVITY: #C0820, See Page 0-011.0.WEIGHT: .80 lb [0,36 kg] cartridge with coil only.WEIGHT: .80 lb [0,36 kg] cartridge with coil only.INSTALLATION: No restrictions.INSTALLATION: No restrictions.
SKV-0822 Viton SKV-0822 VitonSEAL KIT: SKN-0822 Buna "N"SEAL KIT: SKN-0822 Buna "N" * Pull-in: 50 ms. * Drop-Out: 50 ms. * Pull-in: 50 ms. * Drop-Out: 50 ms. voltage supplied @ 80% of nominal flow rating. voltage supplied @ 80% of nominal flow rating.RESPONSE TIME: First indication of change in pressure with 100%RESPONSE TIME: First indication of change in pressure with 100%
INTERNAL LEAKAGE: 5 cu.in/min [82 cc/m] @ 5,000 PSI [350 Bar]INTERNAL LEAKAGE: 5 cu.in/min [82 cc/m] @ 5,000 PSI [350 Bar]FLOW: 5.0 GPM [19 l/m] See performance chart.FLOW: 5.0 GPM [19 l/m] See performance chart.PROOF PRESSURE: 10,000 PSI [700 Bar]PROOF PRESSURE: 10,000 PSI [700 Bar]OPERATING PRESSURE: 5,000 PSI [350 Bar]OPERATING PRESSURE: 5,000 PSI [350 Bar]
SOLENOID VALVE, NORMALLY CLOSED, SOLENOID VALVE, NORMALLY CLOSED, DIRECT ACTING, SPOOL TYPE (2/2)DIRECT ACTING, SPOOL TYPE (2/2)
MIL-H-5606, SAE-#10, SAE-#20, etc. MIL-H-5606, SAE-#10, SAE-#20, etc.OPERATING MEDIA: All general purpose hydraulic fluids such asOPERATING MEDIA: All general purpose hydraulic fluids such as 5000 PSI [350 Bar] = Steel - Unplated. 5000 PSI [350 Bar] = Steel - Unplated.VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
AMBIENT TEMPERATURE: -40° to +122° F. [-40° to +50° C.]AMBIENT TEMPERATURE: -40° to +122° F. [-40° to +50° C.]Please consult factory for continuously energized orPlease consult factory for continuously energized orhigh ambient temperature application (>122° F [50°C])high ambient temperature application (>122° F [50°C])
OIL TEMPERATURE: -40° to +175° F. [-40° to +80° C.]OIL TEMPERATURE: -40° to +175° F. [-40° to +80° C.]
[email protected] www.bucherhydraulics.com/commoncavity
2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USAAll rights reserved.The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
©
Reference: 520-P-100110-EN-00/09.2015
EMDV-08-C6
TYPE "L" COIL TYPE "L" COIL SEE PAGE SEE PAGE 10-001.210-001.2
1
2
7,0 7,0
PRESSURE DROP ( P)
PRESSURE DROP ( P)
100100
G.P.M.(135 SUS)G.P.M.(135 SUS)
PSIPSI0 2
50 50
4 6
EnergizedEnergized
BARBAR8
3,5 3,5
L/M (28,5 cSt)L/M (28,5 cSt)
150150
2002007,67,6
[32,5][32,5]1.28"1.28"
15,115,1 22,722,7
10,510,5
14,014,030,330,3
[45,2][45,2]
1.06" [27.0] HEX1.06" [27.0] HEX
MANUAL OVERRIDEMANUAL OVERRIDE
1.78"1.78"
[50,8][50,8]
[50,8][50,8] 2.00" 2.00"
2.00" 2.00"
2
1
NOTES:NOTES:1. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-012.11. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-012.12. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.2. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.3. ALL A.C. COILS ARE INTERNALLY A.C. TO D.C. RECTIFIED.3. ALL A.C. COILS ARE INTERNALLY A.C. TO D.C. RECTIFIED.4. FOR SOFT SHIFT SOLENOID VALVE SEE PAGE 10-002.04. FOR SOFT SHIFT SOLENOID VALVE SEE PAGE 10-002.0
LTBGWDM
TERMINALS TERMINALS=18GA. 24" LEADS=18GA. 24" LEADS=SPADE TERM.=SPADE TERM.=BOLT TERM.=BOLT TERM.=DIN43650=DIN43650=WEATHER-PACK=WEATHER-PACK=DEUTSCH-DT04-2P=DEUTSCH-DT04-2P=M ETRI-PACK CONN.=M ETRI-PACK CONN.
12D12D24D24D36D36D48D48D110D110D115A115A230A230A
VOLTAGE VOLTAGE= 12 VDC= 12 VDC= 24 VDC= 24 VDC= 36 VDC= 36 VDC= 48 VDC= 48 VDC= 110 VDC= 110 VDC= 115 VAC= 115 VAC= 230 VAC= 230 VAC
AMPSAMPS 3.00 3.00 1.50 1.50 1.00 1.00 0.75 0.75 0.33 0.33 0.32 0.32 0.16 0.16
= BUNA "N" = BUNA "N" = VITON= VITON
SEALSSEALSNV
SIZESIZE10 = 7/8"-14UNF10 = 7/8"-14UNF
BASICBASIC
TYPETYPEC1=NORMALLY CLOSED SPOOLC1=NORMALLY CLOSED SPOOL 2-WAY, 2-POSITION 2-WAY, 2-POSITION
= CARTRIDGE ONLY= CARTRIDGE ONLY
= SAE - #6= SAE - #6= SAE - #8= SAE - #8 "A" = ALUM. HOUSING "A" = ALUM. HOUSING "S" = STEEL HOUSING "S" = STEEL HOUSING
PORTSPORTS0
06TX06TX08TX08TX
02BX02BX03BX03BX
= G 1/4" BSPP= G 1/4" BSPP= G 3/8" BSPP= G 3/8" BSPP
EMDV-10-X-C1-X-XXX XEMDV-10-X-C1-X-XXX X
3.67" 3.67"[93,2][93,2]
SOLENOID VALVE, NORMALLY CLOSED.SOLENOID VALVE, NORMALLY CLOSED.DIRECT ACTING, SPOOL TYPE (2/2)DIRECT ACTING, SPOOL TYPE (2/2)
Steel = 55/60 Ft-Lb. [74/81 Nm] Steel = 55/60 Ft-Lb. [74/81 Nm]
TORQUE:TORQUE:
Aluminum = 35/40 Ft-Lb. [47/54 Nm]Aluminum = 35/40 Ft-Lb. [47/54 Nm]
Reference: 520-P-100120-EN-00/09.2015
EMDV-10-C1
FEATURES AND BENEFITSFEATURES AND BENEFITS
OPERATIONSOPERATIONS
DESCRIPTIONDESCRIPTION
All external carbon steel parts are plated for longer life against the elements.All external carbon steel parts are plated for longer life against the elements.
Industry common cavity.Industry common cavity.All cartridge valves are 100% functionally tested.All cartridge valves are 100% functionally tested.
type, direct acting, screw in type, solenoid operated, directionaltype, direct acting, screw in type, solenoid operated, directionalThis unit is a NORMALLY CLOSED, TWO POSITION, cartridge type, spoolThis unit is a NORMALLY CLOSED, TWO POSITION, cartridge type, spool
Very efficient, wet-armature solenoid core tube construction.Very efficient, wet-armature solenoid core tube construction.Hardened precision fitted spool & sleeve provides reliable, long life.Hardened precision fitted spool & sleeve provides reliable, long life.Interchangeable solenoid coils & terminations options available.Interchangeable solenoid coils & terminations options available.Continuous-duty, very low heat rise & waterproof solenoid coil.Continuous-duty, very low heat rise & waterproof solenoid coil.
plunger smaller then .188" dia.plunger smaller then .188" dia.on top of the valve with a screw driver or a similaron top of the valve with a screw driver or a similarManual Operator Standard: Push in and hold a small plungerManual Operator Standard: Push in and hold a small plungeris shifted and allows flow between ports 1 to 2 and 2 to 1.is shifted and allows flow between ports 1 to 2 and 2 to 1.When solenoid coil is energized, the spool in this valveWhen solenoid coil is energized, the spool in this valveno flow from ports 1 to 2 or 2 to 1.no flow from ports 1 to 2 or 2 to 1.When solenoid coil is de-energized, this valve allowsWhen solenoid coil is de-energized, this valve allows
control valve.control valve.
SOLENOID VALVE, NORMALLY CLOSED, SOLENOID VALVE, NORMALLY CLOSED, DIRECT ACTING, SPOOL TYPE (2/2)DIRECT ACTING, SPOOL TYPE (2/2)
Reference: 520-P-100120-EN-00/09.2015
EMDV-10-C1
SPECIFICATIONSSPECIFICATIONS
VALVE CAVITY: #C1020, See Page 0-012.0.VALVE CAVITY: #C1020, See Page 0-012.0.WEIGHT: 1.91 lb [0,86 kg] cartridge with coil only.WEIGHT: 1.91 lb [0,86 kg] cartridge with coil only.INSTALLATION: No restrictions.INSTALLATION: No restrictions.
SKV-1022 Viton SKV-1022 VitonSEAL KIT: SKN-1022 Buna "N"SEAL KIT: SKN-1022 Buna "N" * Pull-in: 50 ms. * Drop-Out: 50 ms. * Pull-in: 50 ms. * Drop-Out: 50 ms. voltage supplied @ 80% of nominal flow rating. voltage supplied @ 80% of nominal flow rating.RESPONSE TIME: First indication of change in pressure with 100%RESPONSE TIME: First indication of change in pressure with 100% MIL-H-5606, SAE-#10, SAE-#20, etc. MIL-H-5606, SAE-#10, SAE-#20, etc.OPERATING MEDIA: All general purpose hydraulic fluids such asOPERATING MEDIA: All general purpose hydraulic fluids such as
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.] 5000 PSI [350 Bar] = Steel - Unplated. 5000 PSI [350 Bar] = Steel - Unplated.VALVE HOUSING: 2500 PSI [175 Bar] = Aluminum - Anodized.VALVE HOUSING: 2500 PSI [175 Bar] = Aluminum - Anodized.INTERNAL LEAKAGE: 5 cu.in/min [82 cc/m] @ 5,000 PSI [350 Bar]INTERNAL LEAKAGE: 5 cu.in/min [82 cc/m] @ 5,000 PSI [350 Bar]FLOW: 8.0 GPM [30 l/m] See performance chart.FLOW: 8.0 GPM [30 l/m] See performance chart.PROOF PRESSURE: 10,000 PSI [700 Bar]PROOF PRESSURE: 10,000 PSI [700 Bar]OPERATING PRESSURE: 5,000 PSI [350 Bar]OPERATING PRESSURE: 5,000 PSI [350 Bar]
SOLENOID VALVE, NORMALLY CLOSED, SOLENOID VALVE, NORMALLY CLOSED, DIRECT ACTING, SPOOL TYPE (2/2)DIRECT ACTING, SPOOL TYPE (2/2)
AMBIENT TEMPERATURE: -40° to +122° F. [-40° to +50° C.]AMBIENT TEMPERATURE: -40° to +122° F. [-40° to +50° C.]Please consult factory for continuously energized orPlease consult factory for continuously energized orhigh ambient temperature application (>122° F [50°C])high ambient temperature application (>122° F [50°C])
OIL TEMPERATURE: -40° to +175° F. [-40° to +80° C.]OIL TEMPERATURE: -40° to +175° F. [-40° to +80° C.]
[email protected] www.bucherhydraulics.com/commoncavity
2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USAAll rights reserved.The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
©
Reference: 520-P-100120-EN-00/09.2015
EMDV-10-C1
TYPE "L" COIL TYPE "L" COIL SEE PAGE SEE PAGE 10-001.210-001.2
1
2
[100/120 N-m]. [100/120 N-m].
7,0 7,0
PRESSURE DROP ( P)
PRESSURE DROP ( P)
100100
G.P.M.(135 SUS)G.P.M.(135 SUS)
PSIPSI0 3
50 50
6 9 1212
EnergizedEnergized
BARBAR1515 1818
3,5 3,5
L/M (28,5 cSt)L/M (28,5 cSt)
22,522,5
150150
20020011,311,3
[44,4][44,4] 1.75" 1.75"
56,356,333,833,8 4545
10,510,5
14,014,067,567,5
1.31" [33,3] Hex.1.31" [33,3] Hex.TORQUE to 80/90 Ft-Lb.TORQUE to 80/90 Ft-Lb.
MANUAL OVERRIDEMANUAL OVERRIDE
[45,2][45,2] 1.78" 1.78"
2.75"2.75"[69,9][69,9]
2.75"2.75"[69,9][69,9]
1
2
NOTES:NOTES:1. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-013.11. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-013.12. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.2. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.3. ALL A.C. COILS ARE INTERNALLY A.C. TO D.C. RECTIFIED.3. ALL A.C. COILS ARE INTERNALLY A.C. TO D.C. RECTIFIED.4. FOR SOFT SHIFT SOLENOID VALVE SEE PAGE 10-002.04. FOR SOFT SHIFT SOLENOID VALVE SEE PAGE 10-002.0
LTBGWDM
TERMINALS TERMINALS=18GA. 24" LEADS=18GA. 24" LEADS=SPADE TERM.=SPADE TERM.=BOLT TERM.=BOLT TERM.=DIN43650=DIN43650=WEATHER-PACK=WEATHER-PACK=DEUTSCH-DT04-2P=DEUTSCH-DT04-2P=METRI-PACK CONN.=METRI-PACK CONN.
12D12D24D24D36D36D48D48D110D110D115A115A230A230A
VOLTAGE VOLTAGE= 12 VDC= 12 VDC= 24 VDC= 24 VDC= 36 VDC= 36 VDC= 48 VDC= 48 VDC= 110 VDC= 110 VDC= 115 VAC= 115 VAC= 230 VAC= 230 VAC
AMPSAMPS 3.00 3.00 1.50 1.50 1.00 1.00 0.75 0.75 0.33 0.33 0.32 0.32 0.16 0.16
= BUNA "N" = BUNA "N" = VITON= VITON
SEALSSEALSNV
SIZESIZE12 = 1.062"-12UNF12 = 1.062"-12UNF
BASICBASIC
TYPETYPEC1=NORMALLY CLOSED SPOOLC1=NORMALLY CLOSED SPOOL 2-WAY, 2-POSITION 2-WAY, 2-POSITION
3.69" 3.69"[91,2][91,2]
= CARTRIDGE ONLY= CARTRIDGE ONLY
= SAE - #10= SAE - #10= SAE - #12= SAE - #12 "A" = ALUM. HOUSING "A" = ALUM. HOUSING "S" = STEEL HOUSING "S" = STEEL HOUSING
PORTSPORTS0
10TX10TX12TX12TX
04BX04BX06BX06BX
= G 1/2" BSPP= G 1/2" BSPP= G 3/4" BSPP= G 3/4" BSPP
EMDV-12-X-C1-X-XXX XEMDV-12-X-C1-X-XXX X
SOLENOID VALVE, NORMALLY CLOSED.SOLENOID VALVE, NORMALLY CLOSED.
DIRECT ACTING, SPOOL TYPE (2/2) DIRECT ACTING, SPOOL TYPE (2/2)
Reference: 520-P-100130-EN-00/09.2015
EMDV-12-C1
FEATURES AND BENEFITSFEATURES AND BENEFITS
OPERATIONSOPERATIONS
DESCRIPTIONDESCRIPTION
All cartridge valves are 100% functionally tested.All cartridge valves are 100% functionally tested.All external carbon steel parts are plated for longer life against the elements.All external carbon steel parts are plated for longer life against the elements.Very efficient, wet-armature solenoid core tube construction.Very efficient, wet-armature solenoid core tube construction.
type, direct acting, screw in type, solenoid operated, directionaltype, direct acting, screw in type, solenoid operated, directionalThis unit is a NORMALLY CLOSED, TWO POSITION, cartridge type, spoolThis unit is a NORMALLY CLOSED, TWO POSITION, cartridge type, spool
Hardened precision fitted spool & sleeve provides reliable, long life.Hardened precision fitted spool & sleeve provides reliable, long life.Interchangeable solenoid coils & terminations options available.Interchangeable solenoid coils & terminations options available.Continuous-duty, very low heat rise & waterproof solenoid coil.Continuous-duty, very low heat rise & waterproof solenoid coil.
plunger smaller then .188" dia.plunger smaller then .188" dia.on top of the valve with a screw driver or a similaron top of the valve with a screw driver or a similarManual Operator Standard: Push in and hold a small plungerManual Operator Standard: Push in and hold a small plunger
is shifted and allows flow from ports 1 to 2 and 2 to 1.is shifted and allows flow from ports 1 to 2 and 2 to 1.When solenoid coil is energized, the spool in this valveWhen solenoid coil is energized, the spool in this valveno flow from ports 1 to 2 or 2 to 1.no flow from ports 1 to 2 or 2 to 1.When solenoid coil is de-energized, this valve allowsWhen solenoid coil is de-energized, this valve allows
control valve.control valve.
SOLENOID VALVE, NORMALLY CLOSED, SOLENOID VALVE, NORMALLY CLOSED,
DIRECT ACTING, SPOOL TYPE (2/2) DIRECT ACTING, SPOOL TYPE (2/2)
Reference: 520-P-100130-EN-00/09.2015
EMDV-12-C1
SPECIFICATIONSSPECIFICATIONS
VALVE CAVITY: #C1220, See Page 0-013.0.VALVE CAVITY: #C1220, See Page 0-013.0.WEIGHT: 1.98 lb [.90 kg] cartridge with coil only.WEIGHT: 1.98 lb [.90 kg] cartridge with coil only.INSTALLATION: No restrictions.INSTALLATION: No restrictions.
SKV-1222 Viton SKV-1222 VitonSEAL KIT: SKN-1222 Buna "N"SEAL KIT: SKN-1222 Buna "N" * Drop-Out: 50 ms * Drop-Out: 50 ms * Pull-in: 50 ms * Pull-in: 50 ms voltage supplied @ 80% of nominal flow rating. voltage supplied @ 80% of nominal flow rating.RESPONSE TIME: First indication of change in pressure with 100%RESPONSE TIME: First indication of change in pressure with 100%
INTERNAL LEAKAGE: 5 cu.in/min [82 cc/m] @ 5,000 PSI [350 Bar]INTERNAL LEAKAGE: 5 cu.in/min [82 cc/m] @ 5,000 PSI [350 Bar]FLOW: 18.0 GPM [68 l/m] See performance chart.FLOW: 18.0 GPM [68 l/m] See performance chart.PROOF PRESSURE: 10,000 PSI [700 Bar]PROOF PRESSURE: 10,000 PSI [700 Bar]OPERATING PRESSURE: 5,000 PSI [350 Bar]OPERATING PRESSURE: 5,000 PSI [350 Bar]
SOLENOID VALVE, NORMALLY CLOSED, SOLENOID VALVE, NORMALLY CLOSED,
DIRECT ACTING, SPOOL TYPE (2/2) DIRECT ACTING, SPOOL TYPE (2/2)
MIL-H-5606, SAE-#10, SAE-#20, etc. MIL-H-5606, SAE-#10, SAE-#20, etc.OPERATING MEDIA: All general purpose hydraulic fluids such asOPERATING MEDIA: All general purpose hydraulic fluids such as
5000 PSI [350 Bar] = Steel - Unplated. 5000 PSI [350 Bar] = Steel - Unplated.VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
AMBIENT TEMPERATURE: -40° to +122° F. [-40° to +50° C.]AMBIENT TEMPERATURE: -40° to +122° F. [-40° to +50° C.]Please consult factory for continuously energized orPlease consult factory for continuously energized orhigh ambient temperature application (>122° F [50°C])high ambient temperature application (>122° F [50°C])
OIL TEMPERATURE: -40° to +175° F. [-40° to +80° C.]OIL TEMPERATURE: -40° to +175° F. [-40° to +80° C.]
[email protected] www.bucherhydraulics.com/commoncavity
2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USAAll rights reserved.The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
©
Reference: 520-P-100130-EN-00/09.2015
EMDV-12-C1
TYPE "S" COIL TYPE "S" COIL SEE PAGE SEE PAGE 10-001.110-001.1
EMDV-08-X-06-X-XXX XEMDV-08-X-06-X-XXX X
1
2
1.88"1.88"[47,6][47,6]
1.88"1.88"[47,6][47,6] 1.10"1.10"
[27,9][27,9]
1
2
1.00" [25.4] HEX1.00" [25.4] HEX
1.351.35[34,3][34,3]
2.80"2.80"[71,1][71,1]
100100
PRESSURE DROP ( P)
PRESSURE DROP ( P)
PSIPSI
2525
0
5050
7575
1 2 3
3,83,8
125125
150150
L/M (28,5 cSt)L/M (28,5 cSt)
7,67,6 11,411,4
7,07,0
4 5
1,71,7
BARBAR
3,53,5
5,25,2
15,115,1 1919
9,09,0
10,510,5
G.P.M.(135 SUS)G.P.M.(135 SUS)
De-EnergizedDe-Energized
LTBGWDM
TERMINALS TERMINALS=18GA. 24" LEADS=18GA. 24" LEADS=SPADE TERM.=SPADE TERM.=BOLT TERM.=BOLT TERM.=DIN43650=DIN43650=WEATHER-PACK=WEATHER-PACK=DEUTSCH-DT04-2P=DEUTSCH-DT04-2P=METRI-PACK CONN.=METRI-PACK CONN.
= BUNA "N" = BUNA "N" = VITON= VITON
SEALSSEALSNV
SIZESIZE08 = 3/4"-16UNF08 = 3/4"-16UNF
BASICBASIC
TYPETYPE06=NORMALLY OPEN SPOOL06=NORMALLY OPEN SPOOL 2-WAY, 2-POSITION 2-WAY, 2-POSITION
PORTSPORTS0
02BX02BX06TX06TX
= CARTRIDGE ONLY= CARTRIDGE ONLY= G 1/4" BSSP= G 1/4" BSSP= SAE - #6= SAE - #6 "A" = ALUM. HOUSING "A" = ALUM. HOUSING "S" = STEEL HOUSING "S" = STEEL HOUSING
12D12D24D24D36D36D48D48D115D115D
VOLTAGE VOLTAGE= 12 VDC= 12 VDC= 24 VDC= 24 VDC= 36 VDC= 36 VDC= 48 VDC= 48 VDC= 115 VDC= 115 VDC
AMPS AMPS 1.7 1.7.9.9.6.6.5.5.2.2
NOTES:NOTES:1. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-011.11. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-011.12. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.2. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.3. FOR "AC" COILS USE RECTIFIED DIN CONNECTOR 20828.3. FOR "AC" COILS USE RECTIFIED DIN CONNECTOR 20828.
SOLENOID VALVE, NORMALLY OPEN.SOLENOID VALVE, NORMALLY OPEN.
DIRECT ACTING, SPOOL TYPE (2/2) DIRECT ACTING, SPOOL TYPE (2/2)
Steel = 35/40 Ft-Lb. [47/54 Nm] Steel = 35/40 Ft-Lb. [47/54 Nm]
TORQUE:TORQUE:
Aluminum = 25/30 Ft-Lb. [34/41 Nm]Aluminum = 25/30 Ft-Lb. [34/41 Nm]
Reference: 520-P-100510-EN-00/09.2015
EMDV-08-O6
FEATURES AND BENEFITSFEATURES AND BENEFITS
OPERATIONSOPERATIONS
DESCRIPTIONDESCRIPTION
Very efficient, wet-armature solenoid core tube construction.Very efficient, wet-armature solenoid core tube construction.
Industry common cavity.Industry common cavity.All cartridge valves are 100% functionally tested.All cartridge valves are 100% functionally tested.All external carbon steel parts are plated for longer life against the elements.All external carbon steel parts are plated for longer life against the elements.
Hardened precision fitted spool & sleeve provides reliable, long life.Hardened precision fitted spool & sleeve provides reliable, long life.Interchangeable solenoid coils & terminations options available.Interchangeable solenoid coils & terminations options available.Continuous-duty, very low heat rise & waterproof solenoid coil.Continuous-duty, very low heat rise & waterproof solenoid coil.
type, direct acting, screw in type, solenoid operated, directionaltype, direct acting, screw in type, solenoid operated, directionalThis unit is a NORMALLY OPEN, TWO POSITION, cartridge type, spoolThis unit is a NORMALLY OPEN, TWO POSITION, cartridge type, spool
is shifted and allows no flow between ports 1 and 2.is shifted and allows no flow between ports 1 and 2.When solenoid coil is energized, the spool in this valveWhen solenoid coil is energized, the spool in this valveflow between ports 1 and 2.flow between ports 1 and 2.When solenoid coil is de-energized, this valve allowsWhen solenoid coil is de-energized, this valve allows
control valve.control valve.
SOLENOID VALVE, NORMALLY OPEN, SOLENOID VALVE, NORMALLY OPEN, DIRECT ACTING, SPOOL TYPE (2/2) DIRECT ACTING, SPOOL TYPE (2/2)
Reference: 520-P-100510-EN-00/09.2015
EMDV-08-O6
SPECIFICATIONSSPECIFICATIONS
VALVE CAVITY: #C0820, See Page 0-011.0.VALVE CAVITY: #C0820, See Page 0-011.0.WEIGHT: .80 lb [0,36 kg] cartridge with coil only.WEIGHT: .80 lb [0,36 kg] cartridge with coil only.INSTALLATION: No restrictions.INSTALLATION: No restrictions.
SKV-0822 Viton SKV-0822 VitonSEAL KIT: SKN-0822 Buna "N"SEAL KIT: SKN-0822 Buna "N" * Drop-Out: 50 ms * Drop-Out: 50 ms * Pull-in: 50 ms * Pull-in: 50 ms voltage supplied @ 80% of nominal flow rating. voltage supplied @ 80% of nominal flow rating.RESPONSE TIME: First indication of change in pressure with 100%RESPONSE TIME: First indication of change in pressure with 100%
INTERNAL LEAKAGE: 5 cu.in/min [82 cc/m] @ 5,000 PSI [350 Bar]INTERNAL LEAKAGE: 5 cu.in/min [82 cc/m] @ 5,000 PSI [350 Bar]FLOW: 5.0 GPM [19 l/m] See performance chart.FLOW: 5.0 GPM [19 l/m] See performance chart.PROOF PRESSURE: 10,000 PSI [700 Bar]PROOF PRESSURE: 10,000 PSI [700 Bar]OPERATING PRESSURE: 5,000 PSI [350 Bar]OPERATING PRESSURE: 5,000 PSI [350 Bar]
SOLENOID VALVE, NORMALLY OPEN, SOLENOID VALVE, NORMALLY OPEN, DIRECT ACTING, SPOOL TYPE (2/2) DIRECT ACTING, SPOOL TYPE (2/2)
MIL-H-5606, SAE-#10, SAE-#20, etc. MIL-H-5606, SAE-#10, SAE-#20, etc.OPERATING MEDIA: All general purpose hydraulic fluids such asOPERATING MEDIA: All general purpose hydraulic fluids such as
5000 PSI [350 Bar] = Steel - Unplated. 5000 PSI [350 Bar] = Steel - Unplated.VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
AMBIENT TEMPERATURE: -40° to +122° F. [-40° to +50° C.]AMBIENT TEMPERATURE: -40° to +122° F. [-40° to +50° C.]Please consult factory for continuously energized orPlease consult factory for continuously energized orhigh ambient temperature application (>122° F [50°C])high ambient temperature application (>122° F [50°C])
OIL TEMPERATURE: -40° to +175° F. [-40° to +80° C.]OIL TEMPERATURE: -40° to +175° F. [-40° to +80° C.]
[email protected] www.bucherhydraulics.com/commoncavity
2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USAAll rights reserved.The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
©
Reference: 520-P-100510-EN-00/09.2015
EMDV-08-O6
TYPE "L" COIL TYPE "L" COIL SEE PAGE SEE PAGE 10-001.210-001.2
1
2
7,0 7,0
PRESSURE DROP ( P)
PRESSURE DROP ( P)
100100
G.P.M.(135 SUS)G.P.M.(135 SUS)
De-EnergizedDe-Energized
PSIPSI0 2
50 50
4 6BARBAR
8
3,5 3,5
L/M (28,5 cSt)L/M (28,5 cSt)
150150
2002007,67,6 15,115,1 22,722,7
10,510,5
14,014,030,330,3
[32,5][32,5]1.28"1.28"
2.00" 2.00"
[50,8][50,8] 2.00" 2.00"
[50,8][50,8]1.06" [27.0] HEX1.06" [27.0] HEX
1
2
MANUAL OVERRIDEMANUAL OVERRIDE[45,2][45,2]1.78"1.78"
NOTES:NOTES:1. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-012.11. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-012.12. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.2. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.3. ALL A.C. COILS ARE INTERNALLY A.C. TO D.C. RECTIFIED.3. ALL A.C. COILS ARE INTERNALLY A.C. TO D.C. RECTIFIED.4. FOR SOFT SHIFT SOLENOID VALVE SEE PAGE 10-002.04. FOR SOFT SHIFT SOLENOID VALVE SEE PAGE 10-002.0
LTBGWDM
TERMINALS TERMINALS=18GA. 24" LEADS=18GA. 24" LEADS=SPADE TERM.=SPADE TERM.=BOLT TERM.=BOLT TERM.=DIN43650=DIN43650=WEATHER-PACK=WEATHER-PACK=DEUTSCH-DT04-2P=DEUTSCH-DT04-2P=METRI-PACK CONN.=METRI-PACK CONN.
12D12D24D24D36D36D48D48D110D110D115A115A230A230A
VOLTAGE VOLTAGE= 12 VDC= 12 VDC= 24 VDC= 24 VDC= 36 VDC= 36 VDC= 48 VDC= 48 VDC= 110 VDC= 110 VDC= 115 VAC= 115 VAC= 230 VAC= 230 VAC
AMPSAMPS 3.00 3.00 1.50 1.50 1.00 1.00 0.75 0.75 0.33 0.33 0.32 0.32 0.16 0.16
= BUNA "N" = BUNA "N" = VITON= VITON
SEALSSEALSNV
SIZESIZE10 = 7/8"-14UNF10 = 7/8"-14UNF
BASICBASIC
TYPETYPEO1=NORMALLY OPEN SPOOLO1=NORMALLY OPEN SPOOL 2-WAY, 2-POSITION 2-WAY, 2-POSITION
= CARTRIDGE ONLY= CARTRIDGE ONLY
= SAE - #6= SAE - #6= SAE - #8= SAE - #8 "A" = ALUM. HOUSING "A" = ALUM. HOUSING "S" = STEEL HOUSING "S" = STEEL HOUSING
PORTSPORTS0
06TX06TX08TX08TX
02BX02BX03BX03BX
= G 1/4" BSPP= G 1/4" BSPP= G 3/8" BSPP= G 3/8" BSPP
EMDV-10-X-O1-X-XXX XEMDV-10-X-O1-X-XXX X
SOLENOID VALVE, NORMALLY OPENSOLENOID VALVE, NORMALLY OPEN
DIRECT ACTING, SPOOL TYPE (2/2) DIRECT ACTING, SPOOL TYPE (2/2)
3.67" 3.67"[93,2][93,2]
Steel = 55/60 Ft-Lb. [74/81 Nm] Steel = 55/60 Ft-Lb. [74/81 Nm]
TORQUE:TORQUE:
Aluminum = 35/40 Ft-Lb. [47/54 Nm]Aluminum = 35/40 Ft-Lb. [47/54 Nm]
Reference: 520-P-100520-EN-00/09.2015
EMDV-10-O1
FEATURES AND BENEFITSFEATURES AND BENEFITS
OPERATIONSOPERATIONS
DESCRIPTIONDESCRIPTION
Very efficient, wet-armature solenoid core tube construction.Very efficient, wet-armature solenoid core tube construction.
Industry common cavity.Industry common cavity.All cartridge valves are 100% functionally tested.All cartridge valves are 100% functionally tested.All external carbon steel parts are plated for longer life against the elements.All external carbon steel parts are plated for longer life against the elements.
Hardened precision fitted spool & sleeve provides reliable, long life.Hardened precision fitted spool & sleeve provides reliable, long life.Interchangeable solenoid coils & terminations options available.Interchangeable solenoid coils & terminations options available.Continuous-duty, very low heat rise & waterproof solenoid coil.Continuous-duty, very low heat rise & waterproof solenoid coil.
type, direct acting, screw in type, solenoid operated, directionaltype, direct acting, screw in type, solenoid operated, directionalThis unit is a NORMALLY OPEN, TWO POSITION, cartridge type, spoolThis unit is a NORMALLY OPEN, TWO POSITION, cartridge type, spool
plunger smaller then .188" dia.plunger smaller then .188" dia.on top of the valve with a screw driver or a similaron top of the valve with a screw driver or a similarManual Operator Standard: Push in and hold a small plungerManual Operator Standard: Push in and hold a small plunger
is shifted and allows no flow between ports 1 and 2.is shifted and allows no flow between ports 1 and 2.When solenoid coil is energized, the spool in this valveWhen solenoid coil is energized, the spool in this valveflow between ports 1 and 2.flow between ports 1 and 2.When solenoid coil is de-energized, this valve allowsWhen solenoid coil is de-energized, this valve allows
control valve.control valve.
SOLENOID VALVE, NORMALLY OPEN,SOLENOID VALVE, NORMALLY OPEN, DIRECT ACTING, SPOOL TYPE (2/2) DIRECT ACTING, SPOOL TYPE (2/2)
Reference: 520-P-100520-EN-00/09.2015
EMDV-10-O1
SPECIFICATIONSSPECIFICATIONS
VALVE CAVITY: #C1020, See Page 0-012.0.VALVE CAVITY: #C1020, See Page 0-012.0.WEIGHT: 1.90 lb [.88 kg] cartridge with coil only.WEIGHT: 1.90 lb [.88 kg] cartridge with coil only.INSTALLATION: No restrictions.INSTALLATION: No restrictions.
SKV-1022 VitonSKV-1022 VitonSEAL KIT: SKN-1022 Buna "N"SEAL KIT: SKN-1022 Buna "N" * Drop-Out: 50 ms * Drop-Out: 50 ms * Pull-in: 50 ms * Pull-in: 50 ms voltage supplied @ 80% of nominal flow rating. voltage supplied @ 80% of nominal flow rating.RESPONSE TIME: First indication of change in pressure with 100%RESPONSE TIME: First indication of change in pressure with 100%
INTERNAL LEAKAGE: 5 cu.in/min [82 cc/m] @ 5,000 PSI [350 Bar]INTERNAL LEAKAGE: 5 cu.in/min [82 cc/m] @ 5,000 PSI [350 Bar]FLOW: 8.0 GPM [30 l/m] See performance chart.FLOW: 8.0 GPM [30 l/m] See performance chart.PROOF PRESSURE: 10,000 PSI [700 Bar]PROOF PRESSURE: 10,000 PSI [700 Bar]OPERATING PRESSURE: 5,000 PSI [350 Bar]OPERATING PRESSURE: 5,000 PSI [350 Bar]
SOLENOID VALVE, NORMALLY OPEN,SOLENOID VALVE, NORMALLY OPEN, DIRECT ACTING, SPOOL TYPE (2/2) DIRECT ACTING, SPOOL TYPE (2/2)
MIL-H-5606, SAE-#10, SAE-#20, etc. MIL-H-5606, SAE-#10, SAE-#20, etc.OPERATING MEDIA: All general purpose hydraulic fluids such asOPERATING MEDIA: All general purpose hydraulic fluids such as
5000 PSI [350 Bar] = Steel - Unplated. 5000 PSI [350 Bar] = Steel - Unplated.VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
AMBIENT TEMPERATURE: -40° to +122° F. [-40° to +50° C.]AMBIENT TEMPERATURE: -40° to +122° F. [-40° to +50° C.]Please consult factory for continuously energized orPlease consult factory for continuously energized orhigh ambient temperature application (>122° F [50°C])high ambient temperature application (>122° F [50°C])
OIL TEMPERATURE: -40° to +175° F. [-40° to +80° C.]OIL TEMPERATURE: -40° to +175° F. [-40° to +80° C.]
[email protected] www.bucherhydraulics.com/commoncavity
2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USAAll rights reserved.The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
©
Reference: 520-P-100520-EN-00/09.2015
EMDV-10-O1
TYPE "L" COIL TYPE "L" COIL SEE PAGE SEE PAGE 10-001.210-001.2
EMDV-12-X-O1-X-XXX XEMDV-12-X-O1-X-XXX X
1
2
7,0 7,0
PRESSURE DROP ( P)
PRESSURE DROP ( P)
100100
G.P.M.(135 SUS)G.P.M.(135 SUS)
De-EnergizedDe-Energized
PSIPSI0 3
50 50
6 9 1212BARBAR
1515 1818
3,5 3,5
L/M (28,5 cSt)L/M (28,5 cSt)
22,522,5
150150
20020011,311,3 56,356,333,833,8 4545
10,510,5
14,014,067,567,5
1.75" 1.75"[44,4][44,4]
[69,9][69,9]
[69,9][69,9]2.75"2.75"
2.75"2.75"TORQUE to 80/90 Ft-Lb.TORQUE to 80/90 Ft-Lb.
[100/120 N-m]. [100/120 N-m].
1
2
MANUAL OVERRIDEMANUAL OVERRIDE
1.31" [33,3] Hex.1.31" [33,3] Hex.
1.78" 1.78"[45,2][45,2]
NOTES:NOTES:1. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-013.11. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-013.12. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.2. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.3. ALL A.C. COILS ARE INTERNALLY A.C. TO D.C. RECTIFIED.3. ALL A.C. COILS ARE INTERNALLY A.C. TO D.C. RECTIFIED.4. FOR SOFT SHIFT SOLENOID VALVE SEE PAGE 10-002.04. FOR SOFT SHIFT SOLENOID VALVE SEE PAGE 10-002.0
LTBGWDM
TERMINALS TERMINALS=18GA. 24" LEADS=18GA. 24" LEADS=SPADE TERM.=SPADE TERM.=BOLT TERM.=BOLT TERM.=DIN43650=DIN43650=WEATHER-PACK=WEATHER-PACK=DEUTSCH-DT04-2P=DEUTSCH-DT04-2P=METRI-PACK CONN.=METRI-PACK CONN.
12D12D24D24D36D36D48D48D110D110D115A115A230A230A
VOLTAGE VOLTAGE= 12 VDC= 12 VDC= 24 VDC= 24 VDC= 36 VDC= 36 VDC= 48 VDC= 48 VDC= 110 VDC= 110 VDC= 115 VAC= 115 VAC= 230 VAC= 230 VAC
AMPSAMPS 3.00 3.00 1.50 1.50 1.00 1.00 0.75 0.75 0.33 0.33 0.32 0.32 0.16 0.16
= BUNA "N" = BUNA "N" = VITON= VITON
SEALSSEALSNV
SIZESIZE12 = 1.062"-12UNF12 = 1.062"-12UNF
BASICBASIC
TYPETYPE01=NORMALLY OPEN SPOOL01=NORMALLY OPEN SPOOL 2-WAY, 2-POSITION 2-WAY, 2-POSITION
3.69" 3.69"[91,2][91,2]
= CARTRIDGE ONLY= CARTRIDGE ONLY
= SAE - #10= SAE - #10= SAE - #12= SAE - #12 "A" = ALUM. HOUSING "A" = ALUM. HOUSING "S" = STEEL HOUSING "S" = STEEL HOUSING
PORTSPORTS0
10TX10TX12TX12TX
04BX04BX06BX06BX
= G 1/2" BSPP= G 1/2" BSPP= G 3/4" BSPP= G 3/4" BSPP
SOLENOID VALVE, NORMALLY OPEN.SOLENOID VALVE, NORMALLY OPEN.
DIRECT ACTING, SPOOL TYPE (2/2) DIRECT ACTING, SPOOL TYPE (2/2)
Reference: 520-P-100530-EN-00/09.2015
EMDV-12-O1
FEATURES AND BENEFITSFEATURES AND BENEFITS
OPERATIONSOPERATIONS
DESCRIPTIONDESCRIPTION
Very efficient, wet-armature solenoid core tube construction.Very efficient, wet-armature solenoid core tube construction.
All cartridge valves are 100% functionally tested.All cartridge valves are 100% functionally tested.All external carbon steel parts are plated for longer life against the elements.All external carbon steel parts are plated for longer life against the elements.
direct acting, screw in type, solenoid operated, directionaldirect acting, screw in type, solenoid operated, directionalThis unit is a NORMALLY OPEN, TWO POSITION, cartridge type, spool type,This unit is a NORMALLY OPEN, TWO POSITION, cartridge type, spool type,
Hardened precision fitted spool & sleeve provides reliable, long life.Hardened precision fitted spool & sleeve provides reliable, long life.Interchangeable solenoid coils & terminations options available.Interchangeable solenoid coils & terminations options available.Continuous-duty, very low heat rise & waterproof solenoid coil.Continuous-duty, very low heat rise & waterproof solenoid coil.
plunger smaller then .188" dia.plunger smaller then .188" dia.on top of the valve with a screw driver or a similaron top of the valve with a screw driver or a similarManual Operator Standard: Push in and hold a small plungerManual Operator Standard: Push in and hold a small plunger
is shifted and allows no flow between ports 1 and 2.is shifted and allows no flow between ports 1 and 2.When solenoid coil is energized, the spool in this valveWhen solenoid coil is energized, the spool in this valveflow between ports 1 and 2.flow between ports 1 and 2.When solenoid coil is de-energized, this valve allowsWhen solenoid coil is de-energized, this valve allows
control valve.control valve.
SOLENOID VALVE, NORMALLY OPEN, SOLENOID VALVE, NORMALLY OPEN,
DIRECT ACTING, SPOOL TYPE (2/2) DIRECT ACTING, SPOOL TYPE (2/2)
Reference: 520-P-100530-EN-00/09.2015
EMDV-12-O1
SPECIFICATIONSSPECIFICATIONS
VALVE CAVITY: #C1220, See Page 0-013.0.VALVE CAVITY: #C1220, See Page 0-013.0.WEIGHT: 1.98 lb [.90 kg] cartridge with coil only.WEIGHT: 1.98 lb [.90 kg] cartridge with coil only.INSTALLATION: No restrictions.INSTALLATION: No restrictions.
SKV-1222 Viton SKV-1222 VitonSEAL KIT: SKN-1222 Buna "N"SEAL KIT: SKN-1222 Buna "N" * Drop-Out: 50 ms * Drop-Out: 50 ms * Pull-in: 50 ms * Pull-in: 50 ms voltage supplied @ 80% of nominal flow rating. voltage supplied @ 80% of nominal flow rating.RESPONSE TIME: First indication of change in pressure with 100%RESPONSE TIME: First indication of change in pressure with 100%
INTERNAL LEAKAGE: 5 cu.in/min [82 cc/m] @ 5,000 PSI [350 Bar]INTERNAL LEAKAGE: 5 cu.in/min [82 cc/m] @ 5,000 PSI [350 Bar]FLOW: 18.0 GPM [68 l/m] See performance chart.FLOW: 18.0 GPM [68 l/m] See performance chart.PROOF PRESSURE: 10,000 PSI [700 Bar]PROOF PRESSURE: 10,000 PSI [700 Bar]OPERATING PRESSURE: 5,000 PSI [350 Bar]OPERATING PRESSURE: 5,000 PSI [350 Bar]
SOLENOID VALVE, NORMALLY OPEN, SOLENOID VALVE, NORMALLY OPEN,
DIRECT ACTING, SPOOL TYPE (2/2) DIRECT ACTING, SPOOL TYPE (2/2)
MIL-H-5606, SAE-#10, SAE-#20, etc. MIL-H-5606, SAE-#10, SAE-#20, etc.OPERATING MEDIA: All general purpose hydraulic fluids such asOPERATING MEDIA: All general purpose hydraulic fluids such as
5000 PSI [350 Bar] = Steel - Unplated. 5000 PSI [350 Bar] = Steel - Unplated.VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
AMBIENT TEMPERATURE: -40° to +122° F. [-40° to +50° C.]AMBIENT TEMPERATURE: -40° to +122° F. [-40° to +50° C.]Please consult factory for continuously energized orPlease consult factory for continuously energized orhigh ambient temperature application (>122° F [50°C])high ambient temperature application (>122° F [50°C])
OIL TEMPERATURE: -40° to +175° F. [-40° to +80° C.]OIL TEMPERATURE: -40° to +175° F. [-40° to +80° C.]
[email protected] www.bucherhydraulics.com/commoncavity
2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USAAll rights reserved.The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
©
Reference: 520-P-100530-EN-00/09.2015
EMDV-12-O1
TYPE "S" COIL TYPE "S" COIL SEE PAGE SEE PAGE 10-001.110-001.1
1 2 3 4 5
G.P.M. (135 SUS)G.P.M. (135 SUS)
PRESSURE DROP ( P)
PRESSURE DROP ( P)
L/M (28,5 cSt)L/M (28,5 cSt)
2-12-1
1-21-2
0
2020
4040
6060
100100
8080
PSIPSI
BARBAR
1,41,4
2,82,8
4,14,1
6,96,9
5,55,5
3,83,8 7,67,6 11,411,4 15,115,1 1919
1
2
3.10"3.10"[78,7][78,7]
1.10"1.10"[27,9][27,9]
1
2
1.00" [25.4] HEX1.00" [25.4] HEX
1.35"1.35"[34,3][34,3]
1.88"1.88"[47,6][47,6]
1.88"1.88"[47,6][47,6]
.100".100"[2,54][2,54]
ENERGIZEDENERGIZED
NOTES:NOTES:1. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-011.11. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-011.12. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.2. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.3. FOR "AC" COILS USE RECTIFIED DIN CONNECTOR 20828.3. FOR "AC" COILS USE RECTIFIED DIN CONNECTOR 20828.
LTBGWDM
TERMINALS TERMINALS=18GA. 24" LEADS=18GA. 24" LEADS=SPADE TERM.=SPADE TERM.=BOLT TERM.=BOLT TERM.=DIN43650=DIN43650=WEATHER-PACK=WEATHER-PACK=DEUTSCH-DT04-2P=DEUTSCH-DT04-2P=METRI-PACK CONN.=METRI-PACK CONN.
= BUNA "N" = BUNA "N" = VITON= VITON
SEALSSEALSNV
SIZESIZE08 = 3/4"-16UNF08 = 3/4"-16UNF
BASICBASIC
TYPETYPEC3=N.C. BALANCED POPPET C3=N.C. BALANCED POPPET 2-WAY, 2-POSITION 2-WAY, 2-POSITION
PORTSPORTS0
02BX02BX06TX06TX
= CARTRIDGE ONLY= CARTRIDGE ONLY= G 1/4" BSSP= G 1/4" BSSP= SAE - #6= SAE - #6 "A" = ALUM. HOUSING "A" = ALUM. HOUSING "S" = STEEL HOUSING "S" = STEEL HOUSING
12D12D24D24D36D36D48D48D115D115D
VOLTAGE VOLTAGE= 12 VDC= 12 VDC= 24 VDC= 24 VDC= 36 VDC= 36 VDC= 48 VDC= 48 VDC= 115 VDC= 115 VDC
AMPS AMPS 1.7 1.7.9.9.6.6.5.5.2.2
EMDV-08-X-C3-X-XXX XEMDV-08-X-C3-X-XXX X
DIRECT ACTING, BALANCED POPPET (2/2) DIRECT ACTING, BALANCED POPPET (2/2)
SOLENOID VALVE, NORMALLY CLOSED.SOLENOID VALVE, NORMALLY CLOSED.
Steel = 35/40 Ft-Lb. [47/54 Nm] Steel = 35/40 Ft-Lb. [47/54 Nm]
TORQUE:TORQUE:
Aluminum = 25/30 Ft-Lb. [34/41 Nm]Aluminum = 25/30 Ft-Lb. [34/41 Nm]
Reference: 520-P-100310-EN-00/09.2015
EMDV-08-C3
FEATURES AND BENEFITSFEATURES AND BENEFITS
OPERATIONSOPERATIONS
DESCRIPTIONDESCRIPTION
Very efficient, wet-armature solenoid core tube construction.Very efficient, wet-armature solenoid core tube construction.
Industry common cavity.Industry common cavity.All cartridge valves are 100% functionally tested.All cartridge valves are 100% functionally tested.All external carbon steel parts are plated for longer life against the elements.All external carbon steel parts are plated for longer life against the elements.
poppet, direct acting, screw in type, solenoid operated, directionalpoppet, direct acting, screw in type, solenoid operated, directionalThis unit is a NORMALLY CLOSED, TWO POSITION, cartridge type, balancedThis unit is a NORMALLY CLOSED, TWO POSITION, cartridge type, balanced
Hardened precision fitted poppet & sleeve provides reliable, long life.Hardened precision fitted poppet & sleeve provides reliable, long life.Interchangeable solenoid coils & terminations options available.Interchangeable solenoid coils & terminations options available.Continuous-duty, very low heat rise & waterproof solenoid coil.Continuous-duty, very low heat rise & waterproof solenoid coil.
is shifted and allows flow from ports 1 to 2 and 2 to 1.is shifted and allows flow from ports 1 to 2 and 2 to 1.When solenoid coil is energized, the spool in this valveWhen solenoid coil is energized, the spool in this valveno flow from ports 1 to 2 and 2 to 1.no flow from ports 1 to 2 and 2 to 1.When solenoid coil is de-energized, this valve allowsWhen solenoid coil is de-energized, this valve allows
control valve.control valve.
Preferred porting for this valve is Inlet at Port 1.Preferred porting for this valve is Inlet at Port 1.Port 1 to Port 2 operating limits: 5.0 GPM at 5000 PSIPort 1 to Port 2 operating limits: 5.0 GPM at 5000 PSIPort 2 to Port 1 operating limits: 3.5 GPM at 5000 PSIPort 2 to Port 1 operating limits: 3.5 GPM at 5000 PSI
5.0 GPM at 3600 PSI5.0 GPM at 3600 PSI
SOLENOID VALVE, NORMALLY CLOSED, SOLENOID VALVE, NORMALLY CLOSED,
DIRECT ACTING, BALANCED POPPET (2/2) DIRECT ACTING, BALANCED POPPET (2/2)
Reference: 520-P-100310-EN-00/09.2015
EMDV-08-C3
SPECIFICATIONSSPECIFICATIONS
INSTALLATION: No restrictions.INSTALLATION: No restrictions.
* Drop-Out: 50 ms * Drop-Out: 50 ms * Pull-In: 50 ms * Pull-In: 50 ms voltage supplied @ 80% of nominal flow rating. voltage supplied @ 80% of nominal flow rating.RESPONSE TIME: First indication of change in pressure with 100%RESPONSE TIME: First indication of change in pressure with 100%
INTERNAL LEAKAGE: 5 drops/min [0.25 cc/m] @ 5,000 PSI [350 Bar]INTERNAL LEAKAGE: 5 drops/min [0.25 cc/m] @ 5,000 PSI [350 Bar]FLOW: 5.0 GPM [22 l/m] See performance chart.FLOW: 5.0 GPM [22 l/m] See performance chart.PROOF PRESSURE: 10,000 PSI [700 Bar]PROOF PRESSURE: 10,000 PSI [700 Bar]OPERATING PRESSURE: 5,000 PSI [350 Bar]OPERATING PRESSURE: 5,000 PSI [350 Bar]
SKV-0821 VitonSKV-0821 VitonSEAL KIT: SKN-0821 Buna "N"SEAL KIT: SKN-0821 Buna "N"
VALVE CAVITY: #C0820, See Page 0-011.0.VALVE CAVITY: #C0820, See Page 0-011.0.WEIGHT: .90 lb [0,41 kg] cartridge with coil only.WEIGHT: .90 lb [0,41 kg] cartridge with coil only.
PRESSURE DROP (1-2) 100 PSI @ 5 GPM PRESSURE DROP (1-2) 100 PSI @ 5 GPM PRESSURE DROP (2-1) 100 PSI @ 4.5 GPM PRESSURE DROP (2-1) 100 PSI @ 4.5 GPM
SOLENOID VALVE, NORMALLY CLOSED, SOLENOID VALVE, NORMALLY CLOSED,
DIRECT ACTING, BALANCED POPPET (2/2) DIRECT ACTING, BALANCED POPPET (2/2)
MIL-H-5606, SAE-#10, SAE-#20, etc. MIL-H-5606, SAE-#10, SAE-#20, etc.OPERATING MEDIA: All general purpose hydraulic fluids such asOPERATING MEDIA: All general purpose hydraulic fluids such as
5000 PSI [350 Bar] = Steel - Unplated. 5000 PSI [350 Bar] = Steel - Unplated.VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
AMBIENT TEMPERATURE: -40° to +122° F. [-40° to +50° C.]AMBIENT TEMPERATURE: -40° to +122° F. [-40° to +50° C.]Please consult factory for continuously energized orPlease consult factory for continuously energized orhigh ambient temperature application (>122° F [50°C])high ambient temperature application (>122° F [50°C])
OIL TEMPERATURE: -40° to +175° F. [-40° to +80° C.]OIL TEMPERATURE: -40° to +175° F. [-40° to +80° C.]
[email protected] www.bucherhydraulics.com/commoncavity
2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USAAll rights reserved.The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
©
Reference: 520-P-100310-EN-00/09.2015
EMDV-08-C3
TYPE "L" COIL TYPE "L" COIL SEE PAGE SEE PAGE 10-001.210-001.2
1
2
100100
PRESSURE DROP ( P)
PRESSURE DROP ( P)
7,0 7,0
EnergizedEnergized
G.P.M.(135 SUS)G.P.M.(135 SUS)
PSIPSI0
50 50
2 4BARBAR
6
3,5 3,5
L/M (28,5 cSt)L/M (28,5 cSt)
150150
200200
ENERGIZED ENERGIZED [3,18] [3,18] .125" .125"
7,67,6 15,115,1
10,510,5
22,722,714,014,0
[50,8][50,8]
2.00" 2.00"[50,8][50,8]
2.00" 2.00"
1.28"1.28"[32,5][32,5]
1.06" [27.0] HEX1.06" [27.0] HEX
1
2
MANUAL OVERRIDEMANUAL OVERRIDE1.78"1.78"[45,2][45,2]
NOTES:NOTES:1. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-012.11. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-012.12. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.2. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.3. ALL A.C. COILS ARE INTERNALLY A.C. TO D.C. RECTIFIED.3. ALL A.C. COILS ARE INTERNALLY A.C. TO D.C. RECTIFIED.4. FOR SOFT SHIFT SOLENOID VALVE SEE PAGE 10-002.04. FOR SOFT SHIFT SOLENOID VALVE SEE PAGE 10-002.0
LTBGWDM
TERMINALS TERMINALS=18GA. 24" LEADS=18GA. 24" LEADS=SPADE TERM.=SPADE TERM.=BOLT TERM.=BOLT TERM.=DIN43650=DIN43650=WEATHER-PACK=WEATHER-PACK=DEUTSCH-DT04-2P=DEUTSCH-DT04-2P=METRI-PACK CONN.=METRI-PACK CONN.
12D12D24D24D36D36D48D48D110D110D115A115A230A230A
VOLTAGE VOLTAGE= 12 VDC= 12 VDC= 24 VDC= 24 VDC= 36 VDC= 36 VDC= 48 VDC= 48 VDC= 110 VDC= 110 VDC= 115 VAC= 115 VAC= 230 VAC= 230 VAC
AMPSAMPS 3.00 3.00 1.50 1.50 1.00 1.00 0.75 0.75 0.33 0.33 0.32 0.32 0.16 0.16
= BUNA "N" = BUNA "N" = VITON= VITON
SEALSSEALSNV
SIZESIZE10 = 7/8"-14UNF10 = 7/8"-14UNF
BASICBASIC
TYPETYPEC3=N.C. BALANCED POPPETC3=N.C. BALANCED POPPET 2-WAY, 2-POSITION 2-WAY, 2-POSITION
= CARTRIDGE ONLY= CARTRIDGE ONLY
= SAE - #6= SAE - #6= SAE - #8= SAE - #8 "A" = ALUM. HOUSING "A" = ALUM. HOUSING "S" = STEEL HOUSING "S" = STEEL HOUSING
PORTSPORTS0
06TX06TX08TX08TX
02BX02BX03BX03BX
= G 1/4" BSPP= G 1/4" BSPP= G 3/8" BSPP= G 3/8" BSPP
EMDV-10-X-C3-X-XXX XEMDV-10-X-C3-X-XXX X
3.67" 3.67"[93,2][93,2]
DIRECT ACTING, BALANCED POPPET (2/2) DIRECT ACTING, BALANCED POPPET (2/2)
SOLENOID VALVE, NORMALLY CLOSED.SOLENOID VALVE, NORMALLY CLOSED.
Steel = 55/60 Ft-Lb. [74/81 Nm] Steel = 55/60 Ft-Lb. [74/81 Nm]
TORQUE:TORQUE:
Aluminum = 35/40 Ft-Lb. [47/54 Nm]Aluminum = 35/40 Ft-Lb. [47/54 Nm]
Reference: 520-P-100320-EN-00/09.2015
EMDV-10-C3
FEATURES AND BENEFITSFEATURES AND BENEFITS
OPERATIONSOPERATIONS
DESCRIPTIONDESCRIPTION
Very efficient, wet-armature solenoid core tube construction.Very efficient, wet-armature solenoid core tube construction.
Industry common cavity.Industry common cavity.All cartridge valves are 100% functionally tested.All cartridge valves are 100% functionally tested.All external carbon steel parts are plated for longer life against the elements.All external carbon steel parts are plated for longer life against the elements.
poppet, direct acting, screw in type, solenoid operated, directionalpoppet, direct acting, screw in type, solenoid operated, directionalThis unit is a NORMALLY CLOSED, TWO POSITION, cartridge type, balancedThis unit is a NORMALLY CLOSED, TWO POSITION, cartridge type, balanced
Hardened precision fitted poppet & sleeve provides reliable, long life.Hardened precision fitted poppet & sleeve provides reliable, long life.Interchangeable solenoid coils & terminations options available.Interchangeable solenoid coils & terminations options available.Continuous-duty, very low heat rise & waterproof solenoid coil.Continuous-duty, very low heat rise & waterproof solenoid coil.
plunger smaller then .188" dia.plunger smaller then .188" dia.on top of the valve with a screw driver or a similaron top of the valve with a screw driver or a similarManual Operator Standard: Push in and hold a small plungerManual Operator Standard: Push in and hold a small plunger
is shifted and allows flow from ports 1 to 2 and 2 to 1.is shifted and allows flow from ports 1 to 2 and 2 to 1.When solenoid coil is energized, the spool in this valveWhen solenoid coil is energized, the spool in this valveno flow from ports 1 to 2 and 2 to 1.no flow from ports 1 to 2 and 2 to 1.When solenoid coil is de-energized, this valve allowsWhen solenoid coil is de-energized, this valve allows
control valve.control valve.
SOLENOID VALVE, NORMALLY CLOSED, SOLENOID VALVE, NORMALLY CLOSED,
DIRECT ACTING, BALANCED POPPET (2/2) DIRECT ACTING, BALANCED POPPET (2/2)
Reference: 520-P-100320-EN-00/09.2015
EMDV-10-C3
SPECIFICATIONSSPECIFICATIONS
VALVE CAVITY: #C1020, See Page 0-012.0.VALVE CAVITY: #C1020, See Page 0-012.0.WEIGHT: 1.90 lb [0,86 kg] cartridge with coil only.WEIGHT: 1.90 lb [0,86 kg] cartridge with coil only.INSTALLATION: No restrictions.INSTALLATION: No restrictions.
SKV-1022 VitonSKV-1022 VitonSEAL KIT: SKN-1022 Buna "N"SEAL KIT: SKN-1022 Buna "N" * Drop-Out: 50 ms * Drop-Out: 50 ms * Pull-in: 50 ms * Pull-in: 50 ms voltage supplied @ 80% of nominal flow rating. voltage supplied @ 80% of nominal flow rating.RESPONSE TIME: First indication of change in pressure with 100%RESPONSE TIME: First indication of change in pressure with 100%
INTERNAL LEAKAGE: 5 drops/min [0.25 cc/m] @ 5,000 PSI [350 Bar]INTERNAL LEAKAGE: 5 drops/min [0.25 cc/m] @ 5,000 PSI [350 Bar]FLOW: 6.0 GPM [22 l/m] See performance chart.FLOW: 6.0 GPM [22 l/m] See performance chart.PROOF PRESSURE: 10,000 PSI [700 Bar]PROOF PRESSURE: 10,000 PSI [700 Bar]OPERATING PRESSURE: 5,000 PSI [350 Bar]OPERATING PRESSURE: 5,000 PSI [350 Bar]
SOLENOID VALVE, NORMALLY CLOSED, SOLENOID VALVE, NORMALLY CLOSED,
DIRECT ACTING, BALANCED POPPET (2/2) DIRECT ACTING, BALANCED POPPET (2/2)
MIL-H-5606, SAE-#10, SAE-#20, etc. MIL-H-5606, SAE-#10, SAE-#20, etc.OPERATING MEDIA: All general purpose hydraulic fluids such asOPERATING MEDIA: All general purpose hydraulic fluids such as
5000 PSI [350 Bar] = Steel - Unplated. 5000 PSI [350 Bar] = Steel - Unplated.VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
AMBIENT TEMPERATURE: -40° to +122° F. [-40° to +50° C.]AMBIENT TEMPERATURE: -40° to +122° F. [-40° to +50° C.]Please consult factory for continuously energized orPlease consult factory for continuously energized orhigh ambient temperature application (>122° F [50°C])high ambient temperature application (>122° F [50°C])
OIL TEMPERATURE: -40° to +175° F. [-40° to +80° C.]OIL TEMPERATURE: -40° to +175° F. [-40° to +80° C.]
[email protected] www.bucherhydraulics.com/commoncavity
2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USAAll rights reserved.The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
©
Reference: 520-P-100320-EN-00/09.2015
EMDV-10-C3
TYPE "S" COIL TYPE "S" COIL SEE PAGE SEE PAGE 10-001.110-001.1
1
2
2.80"2.80"[71,1][71,1]
1.10"1.10"[27,9][27,9]
1
2
1.00" [25.4] HEX1.00" [25.4] HEX
1.35"1.35"[34,3][34,3]
1.88"1.88"[47,6][47,6]
1.88"1.88"[47,6][47,6]
PRESSURE DROP ( P)
PRESSURE DROP ( P)
PSIPSI0
5050
100100
2
G.P.M.(135 SUS)G.P.M.(135 SUS)
4 6
7,67,6
150150
200200
L/M (28,5 cSt)L/M (28,5 cSt)
15,115,1 22,722,7
8 1010BARBAR
3,53,5
7,07,0
30,330,3 3838
10,510,5
14,014,0
1 to 2 De-Energized1 to 2 De-Energized
2 to 1 Energized2 to 1 Energized
LTBGWDM
TERMINALS TERMINALS=18GA. 24" LEADS=18GA. 24" LEADS=SPADE TERM.=SPADE TERM.=BOLT TERM.=BOLT TERM.=DIN43650=DIN43650=WEATHER-PACK=WEATHER-PACK=DEUTSCH-DT04-2P=DEUTSCH-DT04-2P=METRI-PACK CONN.=METRI-PACK CONN.
= BUNA "N" = BUNA "N" = VITON= VITON
SEALSSEALSNV
SIZESIZE08 = 3/4"-16UNF08 = 3/4"-16UNF
BASICBASIC
TYPETYPEC7=NORMALLY CLOSED POPPETC7=NORMALLY CLOSED POPPET 2-WAY, 2-POSITION 2-WAY, 2-POSITION
PORTSPORTS0
02BX02BX06TX06TX
= CARTRIDGE ONLY= CARTRIDGE ONLY= G 1/4" BSPP= G 1/4" BSPP= SAE - #6= SAE - #6 "A" = ALUM. HOUSING "A" = ALUM. HOUSING "S" = STEEL HOUSING "S" = STEEL HOUSING
12D12D24D24D36D36D48D48D115D115D
VOLTAGE VOLTAGE= 12 VDC= 12 VDC= 24 VDC= 24 VDC= 36 VDC= 36 VDC= 48 VDC= 48 VDC= 115 VDC= 115 VDC
AMPS AMPS 1.7 1.7.9.9.6.6.5.5.2.2
NOTES:NOTES:1. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-011.11. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-011.12. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.2. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.3. FOR "AC" COILS USE RECTIFIED DIN CONNECTOR 20828.3. FOR "AC" COILS USE RECTIFIED DIN CONNECTOR 20828.
EMDV-08-X-C7-X-XXX XEMDV-08-X-C7-X-XXX X
PILOT OPERATED, POPPET TYPE (2/2) PILOT OPERATED, POPPET TYPE (2/2)SOLENOID VALVE, NORMALLY CLOSED.SOLENOID VALVE, NORMALLY CLOSED.
Steel = 35/40 Ft-Lb. [47/54 Nm] Steel = 35/40 Ft-Lb. [47/54 Nm]
TORQUE:TORQUE:
Aluminum = 25/30 Ft-Lb. [34/41 Nm]Aluminum = 25/30 Ft-Lb. [34/41 Nm]
Reference: 520-P-100210-EN-00/09.2015
EMDV-08-C7
FEATURES AND BENEFITSFEATURES AND BENEFITS
OPERATIONSOPERATIONS
DESCRIPTIONDESCRIPTION
All external carbon steel parts are plated for longer life against the elements.All external carbon steel parts are plated for longer life against the elements.All cartridge valves are 100% functionally tested.All cartridge valves are 100% functionally tested.
flow from ports 1 to 2.flow from ports 1 to 2.is shifted and allows flow from ports 2 to 1 and restrictedis shifted and allows flow from ports 2 to 1 and restrictedWhen solenoid coil is energized, the poppet in this valveWhen solenoid coil is energized, the poppet in this valveno flow from ports 2 to 1 and free flow from ports 1 to 2.no flow from ports 2 to 1 and free flow from ports 1 to 2.When solenoid coil is de-energized, this valve allowsWhen solenoid coil is de-energized, this valve allows
type, pilot operated, screw in type, solenoid operated, directionaltype, pilot operated, screw in type, solenoid operated, directionalThis unit is a NORMALLY CLOSED, TWO POSITION, cartridge type, poppetThis unit is a NORMALLY CLOSED, TWO POSITION, cartridge type, poppet
Very efficient, wet-armature solenoid core tube construction.Very efficient, wet-armature solenoid core tube construction.Hardened precision fitted poppet & sleeve provides reliable, long life.Hardened precision fitted poppet & sleeve provides reliable, long life.Interchangeable solenoid coils & terminations options available.Interchangeable solenoid coils & terminations options available.Continuous-duty, very low heat rise & waterproof solenoid coil.Continuous-duty, very low heat rise & waterproof solenoid coil.
control valve.control valve.
SOLENOID VALVE, NORMALLY CLOSED, SOLENOID VALVE, NORMALLY CLOSED,
PILOT OPERATED, POPPET TYPE (2/2)PILOT OPERATED, POPPET TYPE (2/2)
Reference: 520-P-100210-EN-00/09.2015
EMDV-08-C7
SPECIFICATIONSSPECIFICATIONS
VALVE CAVITY: #C0820, See Page 0-011.0.VALVE CAVITY: #C0820, See Page 0-011.0.WEIGHT: .80 lb [0,36 kg] cartridge with coil only.WEIGHT: .80 lb [0,36 kg] cartridge with coil only.INSTALLATION: No restrictions.INSTALLATION: No restrictions.
SKV-0821 Viton SKV-0821 VitonSEAL KIT: SKN-0821 Buna "N"SEAL KIT: SKN-0821 Buna "N" * Drop-Out: 50 ms * Drop-Out: 50 ms * Pull-in: 50 ms * Pull-in: 50 ms voltage supplied @ 80% of nominal flow rating. voltage supplied @ 80% of nominal flow rating.RESPONSE TIME: First indication of change in pressure with 100%RESPONSE TIME: First indication of change in pressure with 100%
INTERNAL LEAKAGE: 5 drops/min [0.25 cc/m] @ 5,000 PSI (350 Bar)INTERNAL LEAKAGE: 5 drops/min [0.25 cc/m] @ 5,000 PSI (350 Bar)FLOW: 10.0 GPM [38 l/m] See performance chart.FLOW: 10.0 GPM [38 l/m] See performance chart.PROOF PRESSURE: 10,000 PSI [700 Bar]PROOF PRESSURE: 10,000 PSI [700 Bar]OPERATING PRESSURE: 5,000 PSI [350 Bar]OPERATING PRESSURE: 5,000 PSI [350 Bar]
SOLENOID VALVE, NORMALLY CLOSED, SOLENOID VALVE, NORMALLY CLOSED,
PILOT OPERATED, POPPET TYPE (2/2)PILOT OPERATED, POPPET TYPE (2/2)
MIL-H-5606, SAE-#10, SAE-#20, etc. MIL-H-5606, SAE-#10, SAE-#20, etc.OPERATING MEDIA: All general purpose hydraulic fluids such asOPERATING MEDIA: All general purpose hydraulic fluids such as
5000 PSI [350 Bar] = Steel - Unplated. 5000 PSI [350 Bar] = Steel - Unplated.VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
AMBIENT TEMPERATURE: -40° to +122° F. [-40° to +50° C.]AMBIENT TEMPERATURE: -40° to +122° F. [-40° to +50° C.]Please consult factory for continuously energized orPlease consult factory for continuously energized orhigh ambient temperature application (>122° F [50°C])high ambient temperature application (>122° F [50°C])
OIL TEMPERATURE: -40° to +175° F. [-40° to +80° C.]OIL TEMPERATURE: -40° to +175° F. [-40° to +80° C.]
[email protected] www.bucherhydraulics.com/commoncavity
2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USAAll rights reserved.The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
©
Reference: 520-P-100210-EN-00/09.2015
EMDV-08-C7
TYPE "L" COIL TYPE "L" COIL SEE PAGE SEE PAGE 10-001.210-001.2
1
2
7,0 7,0
PRESSURE DROP ( P)
PRESSURE DROP ( P)
100100
G.P.M.(135 SUS)G.P.M.(135 SUS)
1 to 2 De-Energized1 to 2 De-Energized
PSIPSI0 4
50 50
2 to 1 Energized2 to 1 Energized
8 1212BARBAR
1616
3,5 3,5
L/M (28,5 cSt)L/M (28,5 cSt)
150150
20020015,115,1
[32,5][32,5]1.28"1.28"
30,330,3 45,445,4
10,510,5
14,014,060,660,6
[45,2][45,2]1.78"1.78"
[50,8][50,8]
2.00" 2.00"[50,8][50,8]
2.00" 2.00"1.06" [27.0] HEX1.06" [27.0] HEX
2
1
NOTES:NOTES:1. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-012.01. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-012.02. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.2. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.3. ALL A.C. COILS ARE INTERNALLY A.C. TO D.C. RECTIFIED.3. ALL A.C. COILS ARE INTERNALLY A.C. TO D.C. RECTIFIED.
LTBGWDM
TERMINALS TERMINALS=18GA. 24" LEADS=18GA. 24" LEADS=SPADE TERM.=SPADE TERM.=BOLT TERM.=BOLT TERM.=DIN43650=DIN43650=WEATHER-PACK=WEATHER-PACK=DEUTSCH-DT04-2P=DEUTSCH-DT04-2P=METRI-PACK CONN.=METRI-PACK CONN.
12D12D24D24D36D36D48D48D110D110D115A115A230A230A
VOLTAGE VOLTAGE= 12 VDC= 12 VDC= 24 VDC= 24 VDC= 36 VDC= 36 VDC= 48 VDC= 48 VDC= 110 VDC= 110 VDC= 115 VAC= 115 VAC= 230 VAC= 230 VAC
AMPSAMPS 3.00 3.00 1.50 1.50 1.00 1.00 0.75 0.75 0.33 0.33 0.32 0.32 0.16 0.16
= BUNA "N" = BUNA "N" = VITON= VITON
SEALSSEALSNV
SIZESIZE10 = 7/8"-14UNF10 = 7/8"-14UNF
BASICBASIC
TYPETYPEC2=NORMALLY CLOSED POPPETC2=NORMALLY CLOSED POPPET 2-WAY, 2-POSITION 2-WAY, 2-POSITION
[94,2][94,2] 3.71" 3.71"
= CARTRIDGE ONLY= CARTRIDGE ONLY
= SAE - #6= SAE - #6= SAE - #8= SAE - #8 "A" = ALUM. HOUSING "A" = ALUM. HOUSING "S" = STEEL HOUSING "S" = STEEL HOUSING
PORTSPORTS0
06TX06TX08TX08TX
02BX02BX03BX03BX
= G 1/4" BSPP= G 1/4" BSPP= G 3/8" BSPP= G 3/8" BSPP
EMDV-10-X-C2-X-XXX XEMDV-10-X-C2-X-XXX X
SOLENOID VALVE, NORMALLY CLOSED.SOLENOID VALVE, NORMALLY CLOSED.
PILOT OPERATED, POPPET TYPE (2/2) PILOT OPERATED, POPPET TYPE (2/2)
Steel = 55/60 Ft-Lb. [74/81 Nm] Steel = 55/60 Ft-Lb. [74/81 Nm]
TORQUE:TORQUE:
Aluminum = 35/40 Ft-Lb. [47/54 Nm]Aluminum = 35/40 Ft-Lb. [47/54 Nm]
Reference: 520-P-100220-EN-00/09.2015
EMDV-10-C2
FEATURES AND BENEFITSFEATURES AND BENEFITS
OPERATIONSOPERATIONS
DESCRIPTIONDESCRIPTION
All external carbon steel parts are plated for longer life against the elements.All external carbon steel parts are plated for longer life against the elements.
Industry common cavity.Industry common cavity.All cartridge valves are 100% functionally tested.All cartridge valves are 100% functionally tested.
flow from ports 1 to 2.flow from ports 1 to 2.is shifted and allows flow from ports 2 to 1 and restrictedis shifted and allows flow from ports 2 to 1 and restrictedWhen solenoid coil is energized, the poppet in this valveWhen solenoid coil is energized, the poppet in this valveno flow from ports 2 to 1 and free flow from ports 1 to 2.no flow from ports 2 to 1 and free flow from ports 1 to 2.When solenoid coil is de-energized, this valve allowsWhen solenoid coil is de-energized, this valve allows
type, pilot operated, screw in type, solenoid operated, directionaltype, pilot operated, screw in type, solenoid operated, directionalThis unit is a NORMALLY CLOSED, TWO POSITION, cartridge type, poppetThis unit is a NORMALLY CLOSED, TWO POSITION, cartridge type, poppet
Very efficient, wet-armature solenoid core tube construction.Very efficient, wet-armature solenoid core tube construction.Hardened precision fitted poppet & sleeve provides reliable, long life.Hardened precision fitted poppet & sleeve provides reliable, long life.Interchangeable solenoid coils & terminations options available.Interchangeable solenoid coils & terminations options available.Continuous-duty, very low heat rise & waterproof solenoid coil.Continuous-duty, very low heat rise & waterproof solenoid coil.
control valve.control valve.
SOLENOID VALVE, NORMALLY CLOSED, SOLENOID VALVE, NORMALLY CLOSED,
PILOT OPERATED, POPPET TYPE (2/2) PILOT OPERATED, POPPET TYPE (2/2)
Reference: 520-P-100220-EN-00/09.2015
EMDV-10-C2
SPECIFICATIONSSPECIFICATIONS
VALVE CAVITY: #C1020, See Page 0-012.0.VALVE CAVITY: #C1020, See Page 0-012.0.WEIGHT: 1.90 lb [0,86 kg] cartridge with coil only.WEIGHT: 1.90 lb [0,86 kg] cartridge with coil only.INSTALLATION: No restrictions.INSTALLATION: No restrictions.
SKV-1021 Viton SKV-1021 VitonSEAL KIT: SKN-1021 Buna "N"SEAL KIT: SKN-1021 Buna "N" * Drop-Out: 50 ms * Drop-Out: 50 ms * Pull-in: 50 ms * Pull-in: 50 ms voltage supplied @ 80% of nominal flow rating. voltage supplied @ 80% of nominal flow rating.RESPONSE TIME: First indication of change in pressure with 100%RESPONSE TIME: First indication of change in pressure with 100%
INTERNAL LEAKAGE: 5 drops/min [0.25 cc/m] @ 5,000 PSI [350 Bar]INTERNAL LEAKAGE: 5 drops/min [0.25 cc/m] @ 5,000 PSI [350 Bar]FLOW: 16.0 GPM [60 l/m] See performance chart.FLOW: 16.0 GPM [60 l/m] See performance chart.PROOF PRESSURE: 10,000 PSI [700 Bar]PROOF PRESSURE: 10,000 PSI [700 Bar]OPERATING PRESSURE: 5,000 PSI [350 Bar]OPERATING PRESSURE: 5,000 PSI [350 Bar]
SOLENOID VALVE, NORMALLY CLOSED, SOLENOID VALVE, NORMALLY CLOSED,
PILOT OPERATED, POPPET TYPE (2/2) PILOT OPERATED, POPPET TYPE (2/2)
MIL-H-5606, SAE-#10, SAE-#20, etc. MIL-H-5606, SAE-#10, SAE-#20, etc.OPERATING MEDIA: All general purpose hydraulic fluids such asOPERATING MEDIA: All general purpose hydraulic fluids such as
5000 PSI [350 Bar] = Steel - Unplated. 5000 PSI [350 Bar] = Steel - Unplated.VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
AMBIENT TEMPERATURE: -40° to +122° F. [-40° to +50° C.]AMBIENT TEMPERATURE: -40° to +122° F. [-40° to +50° C.]Please consult factory for continuously energized orPlease consult factory for continuously energized orhigh ambient temperature application (>122° F [50°C])high ambient temperature application (>122° F [50°C])
OIL TEMPERATURE: -40° to +175° F. [-40° to +80° C.]OIL TEMPERATURE: -40° to +175° F. [-40° to +80° C.]
[email protected] www.bucherhydraulics.com/commoncavity
2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USAAll rights reserved.The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
©
Reference: 520-P-100220-EN-00/09.2015
EMDV-10-C2
TYPE "L" COIL TYPE "L" COIL SEE PAGE SEE PAGE 10-001.210-001.2
1
2
100100
PRESSURE DROP ( P)
PRESSURE DROP ( P)
7,0 7,01 to 2 De-Energized1 to 2 De-Energized
G.P.M.(135 SUS)G.P.M.(135 SUS)
PSIPSI0 8
50 50
2 to 1 Energized2 to 1 Energized
1616 2424BARBAR
3232
3,5 3,5
L/M (28,5 cSt)L/M (28,5 cSt)
150150
2002003030
[44,4][44,4] 1.75" 1.75"
6060 9090
10,510,5
14,014,0120120
[45,2][45,2]
3.71" 3.71"[94,2][94,2]
1.78"1.78"
[69,9][69,9]
[69,9][69,9]2.75"2.75"
2.75"2.75"TORQUE to 80/90 Ft-Lb.TORQUE to 80/90 Ft-Lb.
[100/120 N-m]. [100/120 N-m].
1.31" [33,3] Hex.1.31" [33,3] Hex.
2
1
NOTES:NOTES:1. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-013.11. FOR ALUMINUM OR STEEL VALVE HOUSING CONFIGURATIONS SEE PAGE 0-013.12. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.2. SOLENOIDS AVAILABLE WITH DIODES - CONSULT FACTORY.3. ALL A.C. COILS ARE INTERNALLY A.C. TO D.C. RECTIFIED.3. ALL A.C. COILS ARE INTERNALLY A.C. TO D.C. RECTIFIED.
LTBGWDM
TERMINALS TERMINALS=18GA. 24" LEADS=18GA. 24" LEADS=SPADE TERM.=SPADE TERM.=BOLT TERM.=BOLT TERM.=DIN43650=DIN43650=WEATHER-PACK=WEATHER-PACK=DEUTSCH-DT04-2P=DEUTSCH-DT04-2P=METRI-PACK CONN.=METRI-PACK CONN.
12D12D24D24D36D36D48D48D110D110D115A115A230A230A
VOLTAGE VOLTAGE= 12 VDC= 12 VDC= 24 VDC= 24 VDC= 36 VDC= 36 VDC= 48 VDC= 48 VDC= 110 VDC= 110 VDC= 115 VAC= 115 VAC= 230 VAC= 230 VAC
AMPSAMPS 3.00 3.00 1.50 1.50 1.00 1.00 0.75 0.75 0.33 0.33 0.32 0.32 0.16 0.16
= BUNA "N" = BUNA "N" = VITON= VITON
SEALSSEALSNV
SIZESIZE12 = 1.062"-12UNF12 = 1.062"-12UNF
BASICBASIC
TYPETYPEC2=NORMALLY CLOSED POPPETC2=NORMALLY CLOSED POPPET 2-WAY, 2-POSITION 2-WAY, 2-POSITION
= CARTRIDGE ONLY= CARTRIDGE ONLY
= SAE - #10= SAE - #10= SAE - #12= SAE - #12 "A" = ALUM. HOUSING "A" = ALUM. HOUSING "S" = STEEL HOUSING "S" = STEEL HOUSING
PORTSPORTS0
10TX10TX12TX12TX
04BX04BX06BX06BX
= G 1/2" BSPP= G 1/2" BSPP= G 3/4" BSPP= G 3/4" BSPP
EMDV-12-X-C2-X-XXX XEMDV-12-X-C2-X-XXX X
PILOT OPERATED, POPPET TYPE (2/2) PILOT OPERATED, POPPET TYPE (2/2)
SOLENOID VALVE, NORMALLY CLOSED.SOLENOID VALVE, NORMALLY CLOSED.
Reference: 520-P-100230-EN-00/09.2015
EMDV-12-C2
FEATURES AND BENEFITSFEATURES AND BENEFITS
OPERATIONSOPERATIONS
DESCRIPTIONDESCRIPTION
All external carbon steel parts are plated for longer life against the elements.All external carbon steel parts are plated for longer life against the elements.All cartridge valves are 100% functionally tested.All cartridge valves are 100% functionally tested.
flow from ports 1 to 2.flow from ports 1 to 2.is shifted and allows flow from ports 2 to 1 and restrictedis shifted and allows flow from ports 2 to 1 and restrictedWhen solenoid coil is energized, the poppet in this valveWhen solenoid coil is energized, the poppet in this valveno flow from ports 2 to 1 and free flow from ports 1 to 2.no flow from ports 2 to 1 and free flow from ports 1 to 2.When solenoid coil is de-energized, this valve allowsWhen solenoid coil is de-energized, this valve allows
type, pilot operated, screw in type, solenoid operated, directionaltype, pilot operated, screw in type, solenoid operated, directionalThis unit is a NORMALLY CLOSED, TWO POSITION, cartridge type, poppetThis unit is a NORMALLY CLOSED, TWO POSITION, cartridge type, poppet
Very efficient, wet-armature solenoid core tube construction.Very efficient, wet-armature solenoid core tube construction.Hardened precision fitted poppet & sleeve provides reliable, long life.Hardened precision fitted poppet & sleeve provides reliable, long life.Interchangeable solenoid coils & terminations options available.Interchangeable solenoid coils & terminations options available.Continuous-duty, very low heat rise & waterproof solenoid coil.Continuous-duty, very low heat rise & waterproof solenoid coil.
control valve.control valve.
SOLENOID VALVE, NORMALLY CLOSED, SOLENOID VALVE, NORMALLY CLOSED,
PILOT OPERATED, POPPET TYPE (2/2) PILOT OPERATED, POPPET TYPE (2/2)
Reference: 520-P-100230-EN-00/09.2015
EMDV-12-C2
SPECIFICATIONSSPECIFICATIONS
VALVE CAVITY: #C1220, See Page 0-013.0.VALVE CAVITY: #C1220, See Page 0-013.0.WEIGHT: 1.98 lb [0,90 kg] cartridge with coil only.WEIGHT: 1.98 lb [0,90 kg] cartridge with coil only.INSTALLATION: No restrictions.INSTALLATION: No restrictions.
SKV-1221 VitonSKV-1221 VitonSEAL KIT: SKN-1221 Buna "N"SEAL KIT: SKN-1221 Buna "N" * Drop-Out: 50 ms * Drop-Out: 50 ms * Pull-in: 50 ms * Pull-in: 50 ms voltage supplied @ 80% of nominal flow rating. voltage supplied @ 80% of nominal flow rating.RESPONSE TIME: First indication of change in pressure with 100%RESPONSE TIME: First indication of change in pressure with 100%
INTERNAL LEAKAGE: 5 drops/min [0.25 cc/m] @ 5,000 PSI (350 Bar)INTERNAL LEAKAGE: 5 drops/min [0.25 cc/m] @ 5,000 PSI (350 Bar)FLOW: 36.0 GPM [136 l/m] See performance chart.FLOW: 36.0 GPM [136 l/m] See performance chart.PROOF PRESSURE: 10,000 PSI [700 Bar]PROOF PRESSURE: 10,000 PSI [700 Bar]OPERATING PRESSURE: 5,000 PSI [350 Bar]OPERATING PRESSURE: 5,000 PSI [350 Bar]
SOLENOID VALVE, NORMALLY CLOSED, SOLENOID VALVE, NORMALLY CLOSED,
PILOT OPERATED, POPPET TYPE (2/2) PILOT