6
MODULAR FULL CONVECTION REFLOW OVEN Mid Volume High Volume
MO D U L A R F U L L CO N V EC T I O N R E F LO W O V E N
Prototyping Low Volume Mid Volume High Volume Customized Solutions
Prototyping Low Volume Mid Volume High Volume Customized Solutions
Prototyping Low Volume Mid Volume High Volume Customized Solutions
zo n d a s e r i e s s MT r e f lo w s y s T e M
Zonda - 7 zone reflow system
Speeds up to 24 inches (60 cm) per minute
Zonda - 8/9 zone reflow system
Speeds up to 32 inches (80 cm) per minute
Zonda - 13 zone reflow system
Speeds up to 55 inches (140 cm) per minute
Best value SMT Reflow Oven in the market – designed for Low Cost of Ownership
With a high-capacity, 26-inch wide heater module, the Zonda
series offers unmatched flexibility in board handling. The oven
may be fitted with an adjustable single-rail edge hold conveyor/
mesh belt combo, to carry even the largest boards or multi-
board panels (up to 20 inches wide) through the oven.
The Zonda series support high mix / medium volume up to
high mix / high volume throughput, at different speeds up to
accommodate the fastest pick & place systems , while conser-
ving valuable factory floor space. Rapid response times and
precise temperature controls assure process uniformity,
regardless of component density or board loading, with
identical profile performance in either air or nitrogen.
The ultimate high volume Surface Mount Technology produc-
tion solution delivering the highest levels of repeatability with
the lowest delta Ts.
zo n d a s e r i e s s MT r e f lo w s y s T e M
„ Modern reflow systems require a maximum in flexibility regarding a large product variety in mid- and high-volume productions – the Zonda series especially matches these demands, still featuring low cost of ownership. “
f e aT u r e s a n d b e n e f i T s o f zo n d a s e r i e s s MT r e f lo w s y s T e M
Highest Yields and Tight Process Control
Wide process window
Wide process window for „universal
profiling“ - allows many different
boards to be run on a single
temperature profile.
Heat transfer
The most efficient heat transfer from
extra high volume, high-velocity,
heating modules, producing heater
module response of less than one
second to temperature changes of less
than 0.1°C, thereby maintaining profile
integrity for heavy board loads.
Advanced profiling
Advanced 5 thermocouple PCB
profiling and process parameter
logging capability with the capacity to
store up to 500 temperature recipes
and 500 profile graphs.
f e aT u r e s a n d b e n e f i T s
Smart reflow production solutions
New Flux System Virtually
Eliminates Maintenance
This new flux collection system
traps the flux in a separate
collection box with easy to
remove plates. As a result, the
oven tunnel is kept clean - thus
saving time consuming P.M. A
collection jar captures the flux
and can be removed while the
oven is running for the
ultimate in time savings!
Ultra-Parallel Conveyor
System
Four (4) lead screws ensure the
tightest tolerances and paralle-
lism - even on boards with
3mm clearance at the edges!
Process Control
Powered by ECD, this innovative
software package provides three
levels of process control from
Oven CpK, to Process CpK and
Product Traceability, this
software ensures that all
parameters are optimized and
SPC reporting is fast and easy.
Enhanced Heater Modules
Enhanced flow heater modules
with 40% larger impellar,
blanket the PCB with heat for
the lowest delta Ts on the
toughest boards! Additionally,
the Uniform Gas Management
system eliminates net flow
which results in nitrogen
consumption reductions of up
to 40%!
Fastest Cooling Rates
The new Blow Thru Cooling
module provides cool rates of
>3° C/sec - even on LGA 775!
That rate meets even the most
demanding lead-free profile
requirements!
New Frame
More than simply beautiful, this
new frame utilizes twice the
insulation. This modification
alone, reduces heat loss and
saves up to 40% on electricity
costs!
Lowest Cost of Ownership
With the Balanced Flow Heater
Module (BFM) technology the
cost of running nitrogen has
been reduced by up to 50%!
And the LOW KW features have
reduced Electrical consumption
by up to 40%!
For a complete list of all representatives and more product information please visit our website: www.essemtec.com
Your local Essemtec partner:
e s s e MT ec w o r l d w i d e
Essemtec AG Mosenstrasse 20 CH-6287 Aesch/LU Switzerland Phone: +41 (0) 41 919 60 60 [email protected]
Essemtec USA Glassboro, NJ + Phoenix, AZ Phone: +1 / 856 218 1131 [email protected]
Essemtec Brazil Campinas / São Paulo Phone: +55 / 19 3324 2452 [email protected]
Essemtec Germany Starnberg / Munich Phone: +49 (0) 8151 268 55 01 [email protected]
Essemtec India Delhi + Bangalore Phone: +91 (0) 9880 795 227 [email protected]
Essemtec Benelux Herselt, Belgium Phone: +32 (0) 16 436 742 [email protected]
Essemtec France Bogève, France Phone: +33 (0) 960 10 39 58 [email protected]
Essemtec Asia Singapore Phone: +41 (0) 79 729 10 10 [email protected]
Essemtec Poland Warsaw, Poland Phone: +48 (0) 661 922 962 [email protected]
Become a fan:
