Modular, magnetically interlocking quick-swap fixture solutions.
Most popular items listed—see full catalog and website for the complete Inspection Arsenal® product line from Phillips Precision, Inc.
Pre-configured bundled systems for tactile and vision inspection.
INCH—1/4-20 Clear Anodized Alum, 1x1” hole pattern, 1/2” thick
SYS05_DK12TR03 CMM 12” Dock, Plates + 62 pc Starter Kit $1899
SYS05_DK12TR02 CMM 12” Dock, Plates + 82 pc Complete Kit $2159
SYS05_DK12TR01 CMM 12” Dock, Plates + 158 pc Works Kit $3789
SYS10_DK18TR03 CMM 18” Dock, Plates + 62 pc Starter Kit $2009
SYS10_DK18TR02 CMM 18” Dock, Plates + 82 pc Complete Kit $2269
SYS10_DK18TR01 CMM 18” Dock, Plates + 158 pc Works Kit $3899
SYS20_DK30TR03 CMM 30” Dock, Plates + 62 pc Starter Kit $2509
SYS20_DK30TR02 CMM 30” Dock, Plates + 82 pc Complete Kit $2769
SYS20_DK30TR01 CMM 30” Dock, Plates + 158 pc Works Kit $4399
SYS60_OC6TR03 Optical Comparator 6” Dock/Plates+ 62 pc Starter $1554
SYS60_DK24TR02 Gage Arm 24” Dock/Plates +82 pc Complete Kit $3289
METRIC—M6 Clear Anodized Alum, 20 x 20mm hole pattern, 12.7mm
SYSM1_DK360TR03 CMM 360mm Dock, Plates + 62 pc Starter Kit $2379
SYSM1_DK360TR02 CMM 360mm Dock, Plates + 82 pc Complete Kit $2649
SYSM1_DK360TR01 CMM 360mm Dock, Plates + 158 pc Works Kit $4319
SYSM2_DK540TR03 CMM 540mm Dock, Plates + 62 pc Starter Kit $2609
SYSM2_DK540TR02 CMM 540mm Dock, Plates + 82 pc Complete Kit $2879
SYSM2_DK540TR01 CMM 540mm Dock, Plates + 158 pc Works Kit $4549
SYSM3_DK720TR03 CMM 720mm Dock, Plates + 62 pc Starter Kit $3509
SYSM3_DK720TR02 CMM 720mm Dock, Plates + 82 pc Complete Kit $3779
SYSM3_DK720TR03 CMM 720mm Dock, Plates + 158 pc Works Kit $5449
SYS60M_OC180TR03 Optical Comparator 180mm Dock/Plates+ 62 pc $2074
SYS60M_DK540TR02 Gage Arm 540mm Dock/Plates +82 pc Complete $4209
INCH—1/4-20 Clear Anodized Alum, 1x1” hole pattern, 1/2” thick
SYS01_DK06VIS01 6” Dock , 6” Plate + 34 pc Vision Kit $ 967
SYS01_DK06VIS02 6” Dock , 6” Plate + 34 pc Vision Kit $1519
SYS02_DK12VIS01 12” Dock, 12” Plate + 34 pc Vision Kit $1297
SYS02_DK12VIS02 12” Dock, 12” Plate + 34 pc Vision Kit $1849
SYS03_DK12VIS01 12” Dock, (2) 6x8” Plates + 34 pc Vision Kit $1397
SYS03_DK12VIS02 12” Dock, (2) 6x8” Plates + 34 pc Vision Kit $1904
SYS04_DK06VIS01 6” Dock, 8x4” Plate + 34 pc Vision Kit $1037
SYS04_DK06VIS02 6” Dock, 8x4” Plate + 34 pc Vision Kit $1589
SYS06_DK12VIS01 12” Dock, 12x12” Plate + 34 pc Vision Kit $1697
SYS06_DK12VIS02 12” Dock, 12x12” Plate + 34 pc Vision Kit $2249
VIS-KIT-01 Vision Work Holding Kit, 34 pieces $ 497
VIS-KIT-02 Vision Work Holding Kit, 34 pieces $1059
METRIC—M6 Clr Anodized Alum, 10X10 or 20x20mm holes. 7mm thick
SYSM4_DK100V01 100mm Dock, 100x100 Plate + 34 pc Vision Kit $1022
SYSM4_DK100V02 100mm Dock, 100x100 Plate + 34 pc Vision Kit $1614
SYSM4_DK200V01 200mm Dock, 200x200 Plate + 34 pc Vision Kit $1299
SYSM4_DK200V02 200mm Dock, 200x200 Plate + 34 pc Vision Kit $1894
SYSM4_DK360V01 360mm Dock, (2)180x240 Plates+ 34 pc Vision Kit $1889
SYSM4_DK360V02 360mm Dock, (2)180x240 Plates+ 34 pc Vision Kit $2476
VIS-KIT-01M Vision Basic Work Holding Kit; 34 pieces $ 597
VIS-KIT-02M Vision Enhanced Work Holding Kit; 34 pieces $1179
Keep pace with production Deliver perfect parts to your customers–faster!
It’s not risky, hard, or expensive to improve your inspection process. Inspection Arsenal®, lean and modular fixturing…
• is easy to install on any equipment.
• speeds inspection, making production faster than ever before.
• is risk-free – if it isn’t what you want, simply return for a full refund.
OPEN-SIGHT™ IS YOUR
CLEAR CHOICE FOR
VISION INSPECTION.
CHOOSE LOC-N-LOAD™ FOR
TRADITIONAL CMMs,
OPTICAL COMPARATORS,
AND GAGE ARMS.
Inspection Arsenal® is the ONLY LEAN fixture system on the market.
“The Inspection Arsenal® product line eliminates many non-value added setup steps through
their CMM and vision fixture plates and work holding. By “fixturing-up” and simplifying the
inspection task for repeatable and documented steps, a standard work opportunity has been
created to speed inspection and increase the number of parts inspected, even with a less-skilled
inspector. Implementation will reduce the downtime of expensive machines on the shop floor —
higher spindle utilization increases profits.” Dwighd Delgado, LEAN Six Sigma Practitioner
READ FULL ARTICLE ON WEBSITE!
Choose from 2 Work Holding Kit Options; See Page 3.
FIXTURE DESIGN SERVICES and CUSTOM PLATE ORDERS
Phillips Precision Designs Custom Fixtures We’re your “manufacturing laboratory”.
While Inspection Arsenal® is a universal system, we can also custom-design the
perfect work-holding components for your parts. We design around Loc-N-Load™
quick-swap fixture plates which increases the savings immediately.
• 1-up or multi-part fixtures designed for CMM and vision systems.
• Custom pneumatic fixtures or custom jaws for Rapid-Loc™ vises.
• Special marking, barcoding, or part numbers added to fixtures.
• 3D printing of sample parts available
Send requests to [email protected].
Fixture Design Services Policy
To create the most efficient service to you, we
ask that you
• complete the request form at www.inspectionarsenal.com.
• accompany requests with the prints and electronic files.
We will call you to review the details of the
project. Fixture designs will be developed
around Inspection Arsenal® products whenev-
er possible. When standard product does not
provide the solution, custom clamps and work
holding will be designed.
• A design concept fee may be required
prior to the start of the project. This will
be determined at the time the form and
files have been received. If the project is
awarded, this up-front fee will be deduct-
ed from the final invoice.
• Project scope will be detailed in writing
and approvals required throughout the
design process.
• A not-to exceed project cost can be de-
termined to initiate the project purchase
order.
• Custom fixture projects are non-
refundable.
• Alterations after final approval will be
billed out at the current Phillips Precision
shop rate.
• Phillips Precision, Inc. reserves the right
to use sanitized images and graphical
representations of fixture designs in pro-
motional material.
Choose from 3 Work Holding Kit Options; See Page 2.
Ships with bundled systems. Phillips Precision, Inc. holds the patent on interlocking fixture systems and spring-loaded clamping components. Patent Nos. 8,979,086; 8,931,772, and 10,046,428.
VIS-KIT-01 BASIC Kit Stops, Clamps Hold Downs, V-Blocks, Hole Adjusters
INCH—1/4-20
LNL-DOCK-12 12” Dock $280
LNL-DOCK-18 18” Dock $320 LNL-DOCK-30 30” Dock $420 LNL-PLT-0606 6X6” Plate $180 LNL-PLT-0612 6X12” Plate $250 LNL-PLT-0618 6X18” Plate $320 LNL-PLT-1212 12X12” Plate $400 LNL-PLT-1218 12x18” Plate $550 LNL-PLT-1818 18x18” Plate $1175 LNL-PLT-1824 18X24” Plate $1685 METRIC—M6 LNL-DOCK-M360 360 Dock $340 LNL-DOCK-M540 540 Dock $380 LNL-DOCK-M720 720 Dock $490 LNL-M180180 180x180 Plate $290 LNL-M180360 180x360 Plate $480 LNL-M360360 160x360 Plate $790 LNL-M360540 360x540 Plate $1140
Inch—1/4-20
LNL-ADPT-06 Adapter Plate $119
LNL-ANGL-0603 Angle Plate $180
LNL-QUAL-PLT Qualifying Ball Plate $250
LNL-0606-4X Indexable Plate $385
LNL-RND-0608 Radial Plate $430
METRIC—M6
LNL-ADPT-M6 Adapter Plate $130
LNL-ANGL-M6 Angle Plate $260
LNL-QUAL-PLT-M Qualifying Ball Plate $270
Products of Phillips Precision, Inc.
Inquire about Air-Glide™ feature for larger plates and
heavier parts.
LEVER CLAMPS W/SHAFTS INCH—1/4– 20 METRIC—M6
LC-1.50 LC-1.50-M Lever Clamp, 1.5” w/ $37.99
LC-2.50 LC-2.50-M Lever Clamp, 2.5” camp $42.99
LC-3.50 LC-3.50-M Lever Clamp, 3.5” clamp $57.99
LC-SET-4-1.50 LC-SET-4-1.50-M LC-1.50 Set of 4 - 1.50'' $188.00
LC-SET-4-2.50 LC-SET-4-2.50-M LC-2.50 Set of 4 - 2.50'' $208.00
LC-SET-4--3.50 LC-SET-4--3.50-M LC-3.50 Set of 4 - 3.50'' $268.00
LC-SET-6 LC-SET-6-M 2 SETS of 3 Sizes: 1.50'', $320.00
LC-SET-12 LC-SET-12-M 4 SETS of 3 Sizes: 1.50'', $605.00
SPIDER CLAMPS, COLLET CHUCKS and RISER-GRIP™
INCH—1/4– 20 METRIC—M6 Description Price
SC-06-03 SC-06-03-M 3 Leg 6” Spider Clamp $595.00
SC-06-01 SC-06-01-M 1 Leg 3” Spider Clamp $149.00
CC-ER11 CC-ER11-M ER Collet Chuck $182.00
CC-ER16 CC-ER16-M ER Collet Chuck, Flanged $265.00
CC-ER32 CC-ER32-M ER Collet Chuck, Flanged $349.95
RG-2.75 RG-2.75-M Riser-Grip™, adjustable $325.00
LOC-N-LOAD™ ALUMINUM Individual rails, plates and specialty plates.
INCH—1/4-20
TR-KIT-03 'STARTER' Kit - 62 pcs $829
TR-KIT-02 'COMPLETE' Kit –82 pcs $1089
TR-KIT-01 'WORKS' Kit -158 pcs $2719
MAGN-SET-30 Magnetic Riser Set, 23 pcs $989
STOF-SET-30 Stand-Off & Rest Pad, 37 pcs $525 STOFE-SET-30 Enhanced Stand-Off, 16 pcs $749
METRIC—M6
TR-KIT-03M 'STARTER' Kit - 62 pcs $929
TR-KIT-02M 'COMPLETE' Kit –82 pcs $1199 TR-KIT-01M 'WORKS' Kit –158 pcs $2869 MAGN-SET-30M Magnetic Riser Set, 23 pcs $989
STOF-SET-30M Stand-Off & Rest Pad, 37 pcs $545
STOFE-SET-30M Enhanced Stand-Off, 16 pcs $789
CMM WORK HOLDING KITS and SETS
See catalog for individual clamp components.
Qual Ball Bar Plate Angle Plate Adapter Plate
Order Blank Plates and cus-tomize—add
only the holes you need!
F2020.01
Modular Tower System MT2-SYS-01 Interchangeable cubes can be built vertically and horizontally. Cubes can be turned to any angle and locked securely.
Radial Plate LNL-RND-0608, $430 Perfect for holding round parts. Laser marked rings make aligning easy.
Indexable Plate LNL-0606-4x, $385 Great for inspecting complex parts. Turn and lock plate to access hard to reach features.
Spider-Clamp™ 3-legged Hold round parts from 1.18” to 6” in diameter. Delicate parts held without distortion. Great for vision inspection.
Collet Chucks , 3 sizes CC-ER11 - CC-ER16 - CC-ER32 Hold small diameter parts and create multi-part fixtures. Accepts collets ER-11, -16 and –32. Chucks ER-16 and ER-32 are flanged for greater stability. Collets not included.
Sturdy Lever Clamps, 3 sizes Pictured left: Aluminum hold downs with extra holding force and the ability to hold at steep angles if needed. Post and thumb screw included. Available in 3 sizes. Sold individually or in sets of 4, 6, or 12.
INCH—1/4-20
VCB-150M Vision Corner Block $375
OS-DOCK-06 6” Dock $205
OS-DOCK-12 12” Dock $295
OS-DOCK-18 18” Dock $335 OS-DOCK-24 24” Dock $395
OS-PLT-0606 6X6” Plate $255
OS-PLT-0608 6x8” Plate $275
OS-PLT-0808 8x8” Plate $325
OS-PLT-1208 12x8” Plate $495
OS-PLT-1212 12X12” Plate $895
METRIC—M6 Millimeters
VCB-150M Vision Corner Block $375
OS-DOCK-M100 100mm Dock $185
OS-DOCK-M180 180mm Dock $290
OS-DOCK-M200 200mm Dock $255
OS-DOCK-M360 360mm Dock $439 OS-DOCK-M540 540mm Dock $540 OS-M100100 100x100 Plate $250 OS-M200100 200x100 Plate $320
OS-M200200 200x200 Plate $460 OS-M180240 180x240 Plate $429
OPEN-SIGHT™ POLYCARBONATE and plates for Vision.
Vision Corner Block VCB-150M, $375 Allows COMPLETE view of the part on a vision stage.
Spider-Clamp™ 1-legged Use several of these 3” clamps to hold parts of infinite size and shape.
Spanner-Vise™ SP-VISE-2.5 2-piece vise can infinitely adjust to accommodate workpiece — locks down securely.
Rapid-Loc™ Pneumatic Vise
RL-VISE-SYS02
Regulate pressure up to 150-lbs
or low enough to hold delicate parts.
Riser-Grip™ Full-Access clamp, adjustable. Secure parts up to 2.1” in thickness.
VISES AND SPECIALTY WORK HOLDING CLAMPS
INCH—1/4– 20
RL-VISE-SYS02 Rapid-Loc™ Vise SYSTEM $949
MT2-SYS-01 Modular Tower SYSTEM $749
SP-VISE-2.5 Spanner-Vise™ $675
SV-4375 Skinny-Vise™ w/ thumb screws $359
SV-4375-SPR Skinny-Vise™ w/ 3 compression springs $359
METRIC—M6
RL-VISE-SYS02-M Rapid-Loc™ Vise w/ base plate $1039
MT2-SYS-01M Metric Modular Tower System $749
SP-VISE-2.5-M Spanner-Vise™ w/ adapter base plate $865
SV-4375M Skinny-Vise™ w/ thumb screws $359
SV-4375M-SPR Skinny-Vise™ w/ 3 compression springs $359
See Catalog or Website for more details on these products.
Skinny-Vise™; 2 styles SV-4375, SV-4375-SPR Static jaw is adjustable up to 1.25” while locking jaw easily engages with a gentile twist of thumbscrew OR choose the vise with compression springs (3 strengths) to ensure consistency of force between inspectors.
VISION WORK HOLDING KITS
See chart and website for additional docking rail and plates sizes (18”, 24”, 180mm, 540mm and more).
INCH—1/4-20
VIS-KIT-01 ‘VISION Basic' Kit - 34 pcs $497
VIS-KIT-02 ‘VISION Enhanced' Kit - 34 pcs $1059
METRIC—M6 Millimeters
VIS-KIT-01M ‘VISION Basic' Kit - 34 pcs $597
VIS-KIT-02M ‘VISION Enhanced' Kit - 34 pcs $1179
Two work holding kit options available with
1/4-20 or M6 threads.
VIS-KIT-01 BASIC Kit comes complete with steel,
scalloped spring clamps, hole adjusters, low profile
rails and hold down clamps. An acrylic riser platform
helps to hold parts out over the viewing surface.
VIS-KIT-02 ENHANCED Kit comes with a full-access
Riser-Grip™, magnetic v-blocks, clear scalloped
corner stops, a variety of stand-offs and 2 style hold
downs.
The WORKS KIT
STARTER KIT
MAGNETIC RISER SET ENHANCED STAND-OFF SET
Components available in smaller
sets and individually upon request.
VIS-KIT-02 ENHANCED Kit Riser-Grip™, V-Blocks, Hold Downs, Stand-Offs, Clear Corner Block
RG-2.75 Riser-Grip COMPLETE KIT
STAND-OFF & REST PAD SET
CC-ER-32
CC-ER-16
CC-ER-11
STURDY LEVER CLAMPS—1.5”, 2.5” OR 3.5”
Fixture Plates shown with work-holding sold separately