www.usv.ch [email protected]
BernCTA Energy Systems AGHunzikenstrasse 2 3110 MünsingenTelefon 031 720 15 50Fax 031 720 15 51
ZugCTA Energy Systems AGBösch 416331 HünenbergTelefon 041 766 40 00Fax 041 766 40 09
Modular Uninterruptible Power System
UPS5000-E Overview ............................................. 1
Ultra-high Availability ............................................ 2
High Operating Efficiency ...................................... 3
Excellent Usability .................................................. 4
Comprehensive Reliability Assurance ..................... 5
Intelligent Management System ............................ 6
UPS5000-E Composition ........................................ 7
Technical Data ..................................................... 10
Contents
UPS5000-S Series(50-800kVA)
UPS5000-S Series (50-800kVA) is an advanced modular UPS based
on Huawei's extensive experience in digital technology and power
electronics. Benefiting from high performance DSP and high speed
communication technology, the UPS5000-S system achieves leading
expandability and availability. Its high efficiency, high availability
match the requirements of cloud data center perfectly.
Introduction
Reliable
• 138-485Vac ultra-wide input voltage range, suitable for the worst
power grid
• Redundant design for modules, elimination of the single point of
failure
• iPower pre-warnings for key components in case of power supply
interruption
Efficient
• High module efficiency up to 97.5% and system efficiency up to
96.5%-97% at most frequently-used load rate
• Intelligent hibernation technology ensures efficient UPS operation
• Single UPS capacity up to 800kVA, 50% footprint saving, more IT
rack space
Simple
• Hot swappable power module, bypass module and control
module, simple maintenance and expansion in 5 minutes
• iPower real time monitoring system for UPS, PDU and batteries,
elimination of manual routing inspection
Features
• Data centers in headquarter or disaster recovery data centers
• Internet data centers
• Large cloud computing data centers
Scenarios
Power Module: 50kVA/3U & 97.5% efficiency
UPS5000-S-200kVA
UPS5000-S-600kVA
UPS5000-S-200/300kVA UPS5000-S-400/500kVA
UPS5000-S-800kVA
Others
Height×Width× Depth(mm)
2000 × 600 × 850 2000 × 1200 × 8502000 ×
1400 × 850
2000 ×
2400 × 850
Weight 225-354kg 251-416kg 462-693kg 648-945kg 709-1072kg 1061-1556kg
Certifications EN/IEC 62040-1; EN/IEC 62040-2; EN/IEC 62040-3; CE; CB; RoHS, REACH, WEEE, etc.
Communications Dry contacts, RS485, SNMP
Copyright © Huawei Technologies Co., Ltd. 2017. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
General Disclaimer
The information in this document may contain predictive statements including, without
limitation, statements regarding the future financial and operating results, future product
portfolio, new technology, etc. There are a number of factors that could cause actual results and
developments to differ materially from those expressed or implied in the predictive statements.
Therefore, such information is provided for reference purpose only and constitutes neither an
offer nor an acceptance. Huawei may change the information at any time without notice.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
www.huawei.com
Specifications
ModelUPS5000-S-
200KUPS5000-S-
300KUPS5000-S-
400KUPS5000-S-
500KUPS5000-S-
600KUPS5000-S-
800K
Rated Capacity (kVA/kW) 50-200 50-300 50-400 50-500 50-600 50-800
Number of Power Modules 1-4 1-6 1-8 1-10 1-12 1-16
Mains Input
Input Wiring 3Ph+PE (Neutral wire: optional*)
Rated Voltage 380/400/415Vac
Voltage Range 138-485Vac (305-485Vac for 100% load; 138-305Vac for 40%-100% load)
Frequency Range 40-70Hz
Total Harmonic Distortion
THDi<3% for 100% linear load
Input Power Factor
0.99
Bypass Input
Input Wiring 3Ph+N+PE
Rated Voltage 380/400/415Vac
Input Frequency 50/60±6Hz
Battery Rated Voltage 360-600Vdc (The number of batteries can be selected from 30 to 50; 40 batteries in default)
Output
Output Wiring 3Ph+N+PE
Voltage 380/400/415Vac±1%
Frequency Tracking the bypass input (Normal mode); 50/60Hz±0.05% (Battery mode)
Waveform Sine wave (THDv<1% for linear load)
Overload Capacity Inverter: 110% overload for 60 minutes; 125% overload for 10 minutes; 150% overload for 1 minute
System
Output Power Factor
1
Efficiency Up to 97.1%
Expandability 8
Enviro- nment
Operating Temperature
0-40ºC
Storage Temperature
-40 to 70ºC
Relative Humidity 0%-95% (No condensing)
Operating Altitude
0-1000m. Above 1000m, derating rate based on EN/IEC 62040-3
Audible Noise 66-75dB
Others
Height × Width ×
Depth (mm)2000 × 600 × 850 2000 × 1200 × 850
2000 ×
1400 × 850
2000 ×
2400 × 850
Weight 225-354kg 251-416kg 462-693kg 648-945kg 709-1072kg 1061-1556kg
Certifications EN/IEC 62040-1; EN/IEC 62040-2; EN/IEC 62040-3; CE; CB; RoHS, REACH, WEEE, etc.
Communications Dry contacts, RS485, SNMP
* Without neutral wire, it's TN-C system.
Application scenarios:
■ Financial datacenter ■ Internet datacenter ■ Disaster recovery datacenter ■ Telecom central offices
Rated Capacity: 40-800kVA (1-20 power modules)
Rated Voltage: 380/400/415 Vac
Rated Frequency: 50/60 Hz
Type: Online, double-conversion, modular
UPS5000-E Overview
1Huawei UPS5000-E Series Modular Uninterruptible Power System
Ultra-high Availability
Smooth capacity expansion
■ To avoid power interruption risk in capacity expansion, the capacity of UPS system is planned large enough to meet the power demand in 3-5 years, which leads to low efficiency operation at the initial stage due to low load rate
■ UPS5000-E uses module design and all of power module, bypass module, and control module support hot-swap, which makes smooth capacity expansion according to demand possible and reduces the initial investment
>> All hot-swap module design
Online maintenance, reducing MTTR greatly
■ Availability is used to weight the degree that a system, subsystem or equipment is in operable and committable state. It's positively related to MTBF (Mean Time Between Failures) and negatively related to MTTR (Mean Time To Repair)
■ For traditional UPS, customers need seek help from the suppliers and long recovery time is required because in maintenance engineers need shutdown and dismantle the UPS, and replace the failure components or boards
■ Hot-swap design makes the failure recovery time reduce greatly, and the system availability can be effectively improved as a result. The O&M engineers after trained can replace the failure module of UPS5000-E themselves in few minutes
Hot-swap power module
Hot-swap bypass module
Hot-swap energy control module
2 Huawei UPS5000-E Series Modular Uninterruptible Power System
■ When the load rate is very low (below 10%-15%), intelligent hibernation can be enabled and some power modules will switch to "standby" state to boost load rate and improve operating efficiency
■ To ensure reliability, at least one power module serves as redundancy module and when load increases dramatically, the sleep module will be awaked instantly
Bypass
Mains
100%Load
Module
Module
Module
Module
Module
Module
Module
Module75%
50%
25%
0%
Maintenance Bypass
Battery
Output
Static Bypass
High Operating Efficiency
■ Due to redundancy configuration to ensure reliability and excessive configuration at the initial stage to meet the power demand in 3-5 years, the UPS system of traditional datacenter often operates at load rate of 10%-40% and the operating efficiency is far below the value claimed. It's estimated that the UPS loss takes up 6%-10% of the total power consumption in datacenter
■ Huawei UPS can keep high efficiency operation at low load rate: 96% at 40% rated load and 95% at 20% rated load
■ Given 200 kW load and air conditioner with a COP of 3:1,
- 80, 183 kWh can be saved compared to traditional UPS (92% efficiency)
- 257, 731 kWh can be saved compared to legacy UPS (86% efficiency)
>> High efficiency at low load rate
>> Intelligent hibernation design
■ In good grid area, ECO mode can be enabled to improve efficiency to more than 99% and the maximal energy-saving can be achieved
■ At ECO mode, the load is powered by static bypass (the allowable input range can be set) and the inverter is in "standby" state
■ When input abnormality occurs, UPS5000-E will transfer to online mode in several milliseconds to ensure power continuity and quality
>> Achieving 99% efficiency at ECO mode
100%
80%
60%
90%
70%
50%
55%
65%
75%
85%
95%
0% 20% 40% 60% 80% 100%
Load rate
Efficiency
3Huawei UPS5000-E Series Modular Uninterruptible Power System
Excellent Usability
■ High power density of up to 320kVA per cabinet, 50% footprint saving
■ Front accessible maintenance
■ Back-to-wall installation (40-200kVA)
■ Top/bottom cable entry compatible
>> Small footprint and easy construction
■ Automatic switch between float charging and average charging and temperature compensation
■ Battery hibernation design to avoid long-term float charging, which improves battery service time greatly
■ Battery failure pre-alarm when its health grade is too low
■ Flexible battery configuration: 30-40 batteries per string allow customers to get the faulty battery out instead of replacing it
>> Intelligent battery management, extending battery lifespan
■ THDi<3% & power factor>0.99 reduce the pollution to power grid and lower the expense on power distribution components including cables, breakers, etc.
■ Power walk-in technology boost the ratio of UPS capacity to D. G. capacity to 1:1.1 and cut the D. G. expense down
>> Low investment on power distribution system
4 Huawei UPS5000-E Series Modular Uninterruptible Power System
Comprehensive Reliability Assurance
Reactive power (Q )
φ
PF = 0.9（lagging）
PF = 0.9（leading）
PF = 0.7（leading）
PF = 0.5（leading）
PF = 0.7（lagging）
PF = 0.5（lagging）
Ideal Huawei UPS
PF = 1
Active power ( P )
■ High output power factor of up to 1, 25% more load driven than traditional UPSsThe application of PFC technology in modern IT devices like servers,
storages, routers improves the input power factor to more than 0.95.
And if they are powered by UPS with output power factor of 0.7-0.8,
the investment on UPS will increase remarkably
■ No derating for capacitive or inductive devices with a PF>0.5
>> High load adaptability
■ No derating at 40℃ to ensure power continuity
■ Conformal coating on PCB, improving adaptability to dusty or salty spray environment
>> High environment adaptability
■ 138-485 Vac wide input voltage range to minimize battery use: 485-305Vac for 100% load; 305-138 Vac for 100%-40% load (derating linearly)
■ 6 kV/5 kA lightning protection design, reducing lightning-related failure rate
>> High grid adaptability
100 150 200 250 300 350
Input Voltage Range （V）
Typical UPS Input Voltage Range
Huawei UPS Input Voltage Range
Areas allowing load rate >50%
400 450 500
■ Redundancy design for energy control unit, communication buses to eliminate single point of failure
■ Fault-tolerant design for fan system: 30% load can be driven when 2 fans fail and 50% load when 1 fan fails
>> Redundancy design
Redundant Energy Control Units
Power Module After Airborne Hygroscopic Dust Test
5Huawei UPS5000-E Series Modular Uninterruptible Power System
Value & Features
High availability, warning and troubleshooting
■ Foresight warning of faults and risks improves IDC availability
■ Quickly faults location, virtual inspection
Smart interaction, energy saving
■ Dynamic PUE management
■ Optimizing important power and cooling services
Rapid deployment, one -button launching
■ Pre-configured software and parameters, one-button launching
■ Parameters of AC and UPS loading, testing time saving
Easy visualization maintenance in 3D view
■ The 3D design tool realizes 3D visual maintenance
■ Dynamic 3D display of site temperature, eliminating hot spots
IPInternetNetEco
SystemMornitoringSystem
Intelligent Management System
■ iManager NetEco 1000U can run on the Windows operating system and can be accessed through a web browser. The iManager NetEco 1000U enables you to monitor the key performance indicators (KPIs) and alarms of the UPSs in real time. In addition, it enables you to remotely control and manage the UPSs. This increases the centralized management and remote operation and maintenance capabilities for the UPSs. NetEco 1000U supports connection through USB Data lines, RS232 cable, or network cable.
>> NetEco 1000U Introduction
■ NetEco is a new generation data center management system launched by HUAWEI. It manages the real-time data and status of data center infrastructures, including power, environment, video, and door status and generates alarms if any fault occurs.
■ NetEco displays data center layouts and data reports for customers to easily query equipment status, and provides a standard platform to apply to all data center solutions due to its flexible configuration, smooth capacity expansion, and hierarchical management.
>> NetEco 6000 Introduction
6Huawei UPS5000-E Series Modular Uninterruptible Power System
40kVA power module
Static bypass module
Energy control module
Monitoring unit with built-in SNMP and RS485
Mechanical frame
Maintenance bypass switch
7-inch Liquid Crystal Display (LCD)
Dust-proof net
UPS5000-E Composition
11
2
2
3
3
8
8
66
7
7
4
4
5
5
40-320kVA
7Huawei UPS5000-E Series Modular Uninterruptible Power System
UPS5000-E Composition
>> Dry contact card
The dry contact card allows the UPS to control and monitor the switch state of BCB box and implement EPO.
>> Power module
The Power module with rated capacity of 40 kVA/kW can eliminate all the nine common problems in public grid and output pure and stable sine wave.
Its dimensions are 130 mm (H) x 442 mm (W)x 620 mm (D).
>> Bypass module
The bypass module can provide continuous power supply to load when overload. The bypass module of UPS5000-E features concentrated design and includes 3 models with rated capacity of 200/320/480/600/800 kVA separately according to the rack type.
The dimensions of them are 130 mm (H) x 442 mm (W)x 620 mm (D).
>> Energy control module
The ECM supports intra-rack parallel CAN communication and inter-rack parallel CAN communication. The intra-rack loadshare control and inter-rack loadshare control are isolated at ECM to achieve better expandability.
>> iBox/iBat
Supports wireless transmission and voltages, resistance, and temperatures detection of single cell.
8
Huawei UPS5000-E Series Modular Uninterruptible Power System
Component Function
Antiseismic kit Reinforces the cabinet so that the cabinet meets the requirements of 9 degree seismic fortification intensity.
IP21 component Prevents water from dropping into the cabinet, protecting the cabinet to IP21.
Top outlet kitIf you need to install the cabinet against the wall, install a top outlet kit to meet heat dissipation requirements. It's
suitable for 40-200kVA.
ECM extended subrack Install this subrack when the UPS5000-E is equipped with a backfeed protection card and dry contact extended card.
Top entry cabinetInstall a top entry cabinet to meet the requirements for routing cables from the top of the UPS5000-E cabinet. It is
suitable for 240-320kVA.
Ambient temperature and
humidity sensor
Battery temperature sensor can detect the battery temperature and provide reference for temperature compensation
when float-charging.
Battery temperature sensor Feedbacks real-time temperature and humidity data to dynamic environment monitoring system.
>> Dry contact extended card (Optional)
The dry contact extended card provides five relay dry contact outputs and five signal input ports. The card implements additional alarm and control functions to meet customer requirements.
>> Backfeed protection card (Optional)
The backfeed protection card sends signals to trigger alarm signals or quickly disconnect the feedback loop
>> Battery ground fault detector (Optional)
The battery ground fault detector detects battery ground fault and sends alarm signals when the ground leakage current exceeds the threshold value.
>> Battery monitoring unit (Optional)
Battery monitoring unit supports detection about the voltages, charge and discharge currents, and temperatures of 24 batteries with a rated voltage of 2–12 V DC.
Other Optional Components
9Huawei UPS5000-E Series Modular Uninterruptible Power System
www.usv.ch [email protected]
BernCTA Energy Systems AGHunzikenstrasse 2 3110 MünsingenTelefon 031 720 15 50Fax 031 720 15 51
ZugCTA Energy Systems AGBösch 416331 HünenbergTelefon 041 766 40 00Fax 041 766 40 09
ModelUPS5000-E-
120K-F120
UPS5000-E-
200K-F200
UPS5000-E-
320K-F320
UPS5000-E-
480K-F480
UPS5000-E-
600K-F600
UPS5000-E-
800K-F800
Rated Capacity (kVA/kW) 40-120 40-200 40-320 40-480 40-600 40-800
Number of Power Modules 1-3 1-5 1-8 1-12 1-15 1-20
Input
Mains
Input Wiring 3Ph+N+PE
Rated Voltage 380/400/415Vac
Voltage Range 138-485 Vac (305-485 Vac for 100% load; 138-305 Vac for 40%-100% load)
Input Frequency 40-70 Hz
Total Harmonic Distortion
THDi<3% for linear load, THDi<5% for nonlinear load
Input Power Factor 0.99
BypassRated Voltage 380/400/415 Vac
Input Frequency 50/60±6 Hz
Battery Rated Voltage 360-480 Vdc (The number of batteries can be selected from 30 to 40; 32 batteries in default)
Output
Output Wiring 3Ph+N+PE
Voltage 380/400/415 Vac±1%
Frequency Tracking the bypass input (Online mode); 50/60 Hz±0.1% (Battery mode)
Waveform Sine wave (THDv<1% for linear load)
Overload CapacityInverter: 110% overload for 60 min; 125% overload for 10 min; 150% overload for 1 minBypass: 135% overload for long term; >1000% overload for 100 ms
System
Output Power Factor 1
Efficiency 96%
Expandability Up to 4 units connected in parallel
Cable Entry Route From the top or from the bottom
Environment
Operating Temperature 0-40℃
Storage Temperature -40-70℃
Relative Humidity 0%-95% (No condensing)
Maximum Operating Altitude 1000 m. Above 1000 m, derating 1% for each additional 100 m
Audible Noise ＜65dB ＜68dB ＜70dB
Others
Height×Width×Depth(mm) 2000×600×8502000×1200×850
2000×2000×850
2000×2400×850
Weight 227-293kg 227-359kg 253-480 kg 693-1050 kg 1045-1500 kg 1185-1800 kg
Certifications YD/1095-2008;EN/IEC 62040-1; EN/IEC 62040-2; EN/IEC 62040-3; TLC;CE; CB; RoHS, REACH, WEEE, etc.
Communications Dry contacts, RS485, SNMP
Technical Data
10Huawei UPS5000-E Series Modular Uninterruptible Power System
